Click Here to download this file: /data/power/MYBSC0128CAZT.pdf

MYBSC0128CA*T DATA Sheet
1
DC-DC Converter DATA Sheet
MYBSC0128CABT/MYBSC0128CAZT
Feature:
1/16th Brick type
Vin 36Vdc-75Vdc
Vout 12Vdc
I out 8.3Adc
100W
Application:
Telecommunication equipments, Big data storage devices, Process equipments, Measurement instruments, Broadcasting equipments, Robots ,
CPU and FPGA mounted equipments etc.
1. Appearance
MYBSC0128CABT,
MYBSC0128CAZT
2. Block diagram
+Vin 1
8 +Vout
Filter
7
+SENSE
-Vin
3
4 -Vout
5 -SENSE
Drive
ON/OFF
2
Controller
Feed Back
Detect
6 TRIM
3. Environmental Condition
Operating Temperature Range
-40℃ ~ +85℃(Temperature gradient ≦10℃/H)
Storage Temperature Range
-40℃ ~ +85℃(Temperature gradient ≦25℃/H)
Operating Humidity Range
Relative Humidity 5% ~ 90%
(No water condenses in any cases.)
within absolute Humidity0.044kg/kg D.A.max
Storage Humidity Range
5% ~ 95% (No water condenses in any cases.)
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.2.19
MYBSC0128CA*T DATA Sheet
2
4. Appearance, Dimensions
4.1. Weight : 15.2g typical
4.2. Dimension
MYBSC0128CABT
MYBSC0128CAZT
33.00±0.5
Pin 1
27.95±0.25
2P
8
2
6
4P
7
2P
23.20±0.5
1
5
3
4
10.35±0.5
P=3.81±0.25
Unit : mm
8-Φ1.57±0.1
4.3. Recommendable soldering land pattern
5. Terminal pin number and Function
Pin No.
Signal
Function
1
Vin(+)
Positive Input Voltage
2
ON/OFF
Remote ON/OFF
3
Vin(-)
Negative Input Voltage
4
Vout(-)
Negative output Voltage
5
SENSE(-)
Negative Remote Sense
6
TRIM
Output Voltage Adjustment
7
SENSE(+)
Positive Remote Sense
8
Vout(+)
Positive output Voltage
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.2.19
MYBSC0128CA*T DATA Sheet
3
6. Electrical Characteristics
6.1. Absolute Maximum Ratings
Item
Unit
Absolute Rating
Minimum Input Voltage
Vdc
0
Continuous
Vdc
60
100msec
Vdc
100
Maximum
Vdc
7
Minimum
Vdc
0
Maximum Input Voltage
ON/OFF terminal
Control Voltage
Remarks
<Slew rate 52V/10uS
Input voltage shall not be applied over the absolute maximum voltage
If it exceeded the absolute Maximum Rating, the product characteristics will be deteriorate or damaged.
Even if it works under such circumstances, the life time will be significantly shortened.
This product is designed to operate within the maximum operating voltage ratings.
6.2. Electrical Characteristics standard (Ta=25℃)
6.2.1. Input Characteristics
Value
Item
Symbol
Input Voltage Range
Vin
Turn-on Input Voltage
Input Voltage difference of
Turn-on and Turn-off
-
Galvanic Isolation Voltage
-
Condition
Typ.
Max.
36
60
32
48
-
60
75
36
Vdc
Vdc
Vdc
2.0
-
-
Vdc
1500
-
-
Vdc
Continuous
100msecMax.
Vin=increasing
Voltage applied for 1 minute
Cutoff Current:1mA
Ta=25℃±10℃ / 60%±15%RH
Unit
Min.
6.2.2. Specific Characteristics (Ta=25℃ with temperature derated.)
Test circuit is mentioned in section 6.5.
Item
Symbol
Condition
Output Voltage
Vout
Vin = Min~Max
Iout = Min~Max
Output Voltage Adjustable Range
Value
Unit
Min.
Typ.
Max.
11.64
12
12.36
Vdc
Vout(adj)
-10
-
+10
%
Output Current
Iout
0
-
8.3
A
Ripple Noise Voltage
Vripl
.
-
-
300
mV(p-p)
Efficiency
η
Vin = 48V
Iout = 8.3A
Ta = 25degC
-
92.5
-
%
Von
0
-
0.7
Vdc
Voff
2.0
-
ON/OFF pin
Control Voltage
RC start up delay time
Vdc
trc
Vin = Min~Max
Iout = Min~Max
RC connected with –Vin
-
5
-
ms
Setting point of Over Voltage
Protection
Setting point of Over Current
Protection
Setting point of Temperature
Protection
OVP
Vin = Min~Max
15.6
-
-
Vdc
OCP
Vin = Min~Max
8.55
-
-
A
OTP
Vin = Min~Max.
-
140
-
℃
External Output Capacitance
Cout
Ceramic capacitor
300
-
1000
μF
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.2.19
MYBSC0128CA*T DATA Sheet
4
6.3. Test Circuit
In the following test circuit, the initial values in section 6 should be met.
1
10mΩ
v
v
Vin
Vin(+)
8
C1 MYBSC
0128CABT
3
Vout(+)
+SENSE
C1:
C2:
RL:
Vin:
V :
-SENSE
2
RL
v
R2
C2
Short =ON
Open =OFF
R1
v
TRIM 6
Vin(-)
10mΩ
7
Vout(-)
ON/OFF
5
4
Low Impedance Electrolytic Capacitor 100μF
Ceramic Capacitor 300μF~1000μF
Electronic Load Device :Model ELL355 KEISOKUGIKEN equivalent
DC Power Supply : Model HP6675A HP equivalent
Digital Multi-meter :Model HP34401A HP equivalent
※Other than above condition, DC-DC converter may operate abnormally.
It should be fully confirmed on your board before use.
※Ripple Noise Test
50mm
DC-DC
Converter
C1
C2
: Ceramic Capacitor
: Ceramic Capacitor
C1
0.1μF
10μF
C2
1.5m50Ω
Coaxial cable
LOAD
TRC-50F
Terminating resistance
Oscilloscope
BW=150MHz
6.4. Protection Circuit
6.4.1. Over Voltage Protection(OVP)
Output voltage goes over OVP specified voltage in 6.2.2., typically 4msec after it, it will be in hiccup mode.
After abnormal condition is removed, it automatically returns to normal operation.
It might go over OVP specified voltage with some reasons of input voltage sudden change or output load sudden change. In this case,
OVP does not work until typically 4msec go by. Please evaluate it on your application.
6.4.2. Over Current Protection(OCP)
Output current goes over OCP specified current, it will be into hiccup mode typically 1msec after OCP starts to work. After abnormal
condition is removed, it automatically returns to normal operation.
6.4.3. Over Temperature Protection
When temperature around main switch goes over approximately 140 degree C, OTP suddenly work to stop operation. After the
temperature at that point goes back below OTP temperature, it automatically return to normal operation.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.2.19
MYBSC0128CA*T DATA Sheet
5
7. Control Pins
7.1. To Adjust Output Voltage
・When the nominal output voltage is used. Please do not connect TRIM-pin(Terminal pin No.6).
・It is able to increase the output voltage (Vo,adj) in range between 100% and 110% of nominal output voltage (Vo,nom), when resistors
connected between TRIM-pin(Terminal pin No.6) to SENSE(+)-pin (Terminal pin No.7). (Vout –Up Control).
 5.1 Vo 100(%) Δ(%)  5.1 100(%)

kΩ
Radj - up=
- 10.22 1.225

Δ
(%)
Δ
(%)


Δ
Vo, adj - Vo, nom
 100(%)
Vo, nom
・It is able to decrease the output voltage (Vo,adj) in range between 90% and 100% of the nominal output voltage(Vo,nom), when resistors
connected between TRIM-pin(Terminal No.6) to SENSE(-)-pin (Terminal No.5). (Vout-Down control)
 5.1 100(%)

kΩ
Radj - down=
- 10.22  Δ(%)

Vo, nom - Vo, adj
Δ
 100(%)
Vo, nom
After calculating external resistance, please adjust the resistance value for adequate Vo. Adj on your board.
Also when output voltage has to be changed, Please re-calculate the resistance and re-evaluate it on board.
7.2. ON/OFF Control
・ON Control:
ON/OFF Pin (Terminal No.2) should be connected to Vin(-) Pin (Terminal No.3), or keeps less than 0.7V.
・OFF Control:
ON/OFF Pin (Terminal No.2) should be opened, or the current from ON/OFF Pin (Terminal No.2) to Vin(-) Pin (Terminal No.3) is
controlled less than 30uA.
When ON/OFF pin is open, The voltage of maximum 5V appears on the ON/OFF pin.
MYBSC0128CABT
2
example
3
Vin(-)
ON/OFF
or
7.3. External input capacitor
When a inductance or a switch devise is connected to Input line, or when the transient response of input power supply is bad, the load
response of DC-DC converter may not be normally operated or/and DC-DC converter may cause unusual oscillation, please connect an
external input capacitor.
7.4. Output voltage remote sense
It equips the remote sense function which corrects a voltage drop caused by distance between the power supply output terminal and the load
terminal. A voltage drop by the line drop can be corrected by connecting Pin No.5 and Pin No.7 to the load terminal.
When use a remote sense, please use a shielding wire, a twist line, a side by side pattern and so on to line of remote sense line, to minimize
the influence of the noise. A Output Voltage range able to Remote Sense Range is within +/-5%. And also use within the output adjustable
range.
When it is not necessary, please connect terminal No.4 and No.5 ,and also No.7 and No.8 terminal.
If you use an output voltage remote sense, please evaluate the characteristics of DC-DC converter on your board conditions.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.2.19
MYBSC0128CA*T DATA Sheet
6
8. Reliability
8.1. Reliability Test Items.
Item
Humidity
Thermal Shock
Mechanical Vibration
Mechanical Shock
Test Condition
+40℃±2℃, 90~95%RH, 100 hours
-40℃ to +85℃, 5 cycles
10 to 55Hz, max. 1.5mm amplitude,
1 hour for each of X, Y, Z directions.
20G, 1 time for each of X, Y, Z directions.
Criteria
No damage in appearance and
no deviation of electrical
characteristics Specified in section
6.2.2. 2 hours after the test.
8.2. Soldering Heat Resistance
Immerse the part of lead where it is to be soldered on a motherboard in a solder bath of 260+/-5 degree C for 3+/-0.5sec. Then tested
products are left for 2 hours.
There is no damage in appearance and no deviation from electrical characteristics in 6.2.2.
8.3. Lead Pin Strength
Strain a lead pin by gradual-increasingly 5.0N along axial direction; withstand for 5sec.
No damage on a lead pin.
8.4. Solderability of lead pins
The lead pins will be immersed in the Isopropyl Alcohol (JIS K 1522) with Rosin (JIS K5902) solution (the concentration of Rosin will be
allowed 10wt% to 35wt%, and normally approximately). 25wt% will be used without any specific requirement.).
Then the lead pins will be immersed 1 to 1.5mm from the lead end in the solder Sn96.5/Ag3/Cu0.5 melted at the temperature of 250degree
C +/-5 degree C for 5+/-1 seconds, and pulled up completely.
The solder will adhere to over 75% of immersed area.
9. Safety Standard
Recognized UL60950, Compliant to IEC 60950.
CE Mark is shown on a package box.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.2.19
MYBSC0128CA*T DATA Sheet
7
10. EMI Standard
Compliant to VCCI Class A
The circuitry is as below.
※Radiation Noise
1
48V
Clamper
KT10
(KYORITSU
CORPORATION)
3
※Clamper
100u
F
DCDC Convertor
External input
filter
2
※Clamper
MYBSC0128CABT
4
5
Resistive load
※Clamper:ZCAT3035-1330(TDK)
※Conduction Noise
48V
Resistive load
1
LISN
(KNW407)
2
3
External input
filter
5
4
100u
F
DCDC Convertor
MYBSC0128CABT
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.2.19
MYBSC0128CA*T DATA Sheet
8
11. Packaging Specification
11. 1 .Packaging Specification for MYBSC0128CABT(SMD type)
11. 1. 1 Reel Dimension
Pin1
57.5±1.0
φ100±1
φ330±2
A
2.0±0.5
Indication
φ21.0±0.8
φ13.0±0.5
Portion A
11. 1. 2. Emboss Tape Dimensions
Pin No.1
(
Epmty portion
(200mm MIN)
Epmty portion
(180mm MIN)
)
Leader portion
(200mm MIN)
"Module on tape" portion
Note:
Indication
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.2.19
MYBSC0128CA*T DATA Sheet
9
11. 1. 3. Taping Specification
1. The adhesive strength of the protective tape must be within 0.1-1.3N.
2. Each reel contains 140 pcs.
3. Moisture-proof packaging, because of MSL 3.
4. The deficiency per reel is 0 piece.
5. The reel shows customer part number or/and Murata part number and quantity.
6. The color of reel is not designated.
※Marking on the box and reel
1. MURATA Parts Number
2. Quantity
3. Inspection No.
4. ROHS-Y<*>
11.2. Packaging Specification for MYBSC0128CAZT(Thru-hole insert pin type)
Please contact us for detail of this packaging,
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.2.19
MYBSC0128CA*T DATA Sheet
10
12. Electrical data
12.1. Efficiency
Vout=12V Ioutmax=8.3A Ta=25℃
100
Vin=36V
95
Eff [%]
90
Vin=48V
85
80
Vin=60V
75
70
Vin=75V
65
0
20
40
60
80
100
120
Io/Iomax [%]
12.2. Output Ripple Spike
Vin=48Vdc Full Load Ta=25℃
12.3. Remote Control
Vin=48Vdc Full Load Ta=25℃
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.2.19
MYBSC0128CA*T DATA Sheet
11
12.4 Temperature De-rating <For Reference Only>
Test Condition
・Input Voltage:48Vdc , Air flow:2.0m/s, 1.5m/s, 1.0m/s
・Size of Mounted Evaluation board:237x237 , 12 Copper layers,
・Output voltage:12V (TRIM pin is Open).
Temperature de-rating curve is plotted that temperature at above 3points should be 119degree C.
237mm
237mm
Thermal measurement points
FET and Ferrite core
Pin1
Air flow
12Layers Cupper
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.2.19
MYBSC0128CA*T DATA Sheet
12
13. Notice
13.1. Soldering
13.1.1. Flux
Please solder the product with Rosin Flux, which contains chlorine 0.2wt% or less.
Please do NOT use acid flux or water-soluble flux, which could corrode metals and glass of the product.
13.1.2. Solder
Please use the solder Sn-3Ag-0.5Cu or the equivalent type.
13.1.3. Recommendable soldering condition
①Reflow Solder
Reflow Soldering Profile : JEDEC IPC/JEDE J-STD-020D
Table 5-2 Classification Reflow Profiles Pb-Free Assembly Large Body
Profile details
Soldering temperature
245℃+0/-5℃
Soldering time
30 seconds, 240℃~245℃
Heating time
60~150 seconds, 217℃ min
Preheating time
60~120seconds, 150℃~200℃
Programming rate
3℃/sec. Max., 217℃~245℃
Descending rate
6℃/sec.Max
Total soldering time
8 minutes Max., 25℃~245℃
Time
1time
245℃
Part’s
surface 217℃
temperature
200℃
[°C]
60~150(sec)
150℃
60~120(sec)
(Caution)
Times
Do not vibrate for the products during reflow soldering.
And also please do not expose it in high temperature for long time, because mounted parts may come off.
If the products are mounted on backside of the board, please use glue to hold them..
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.2.19
MYBSC0128CA*T DATA Sheet
13
②Condition of Iron Soldering
Preheating
120±10℃ 30 minutes max
Iron temperature
350℃ max
Soldering time
3 seconds max
(Caution1)
Do not strongly push the ferrite core around the ferrite core on the DC-DC converters.
It will cause bad influence to DCDC converter’s characteristics.
13.2. Cleaning
Please do not clean or wash the products.
13.3. Storage
13.3.1.
Please store the products in room where the temperature/humidity is stable and direct sunlight is protected, Please use the products within
6 months after the delivery.
Please consider to handle the products of MSL 3 which is capable within 168hours for soldering after the package opened.
After the package is opened, if the products are stored longer than 168hours without soldering, please store them in 10%RH or less, and 35
degree C or less of atmosphere.
In case that the products are not stored such atmosphere, please bake at 125 degree C for 24hours before they are used. However please
do it after take them out from packaging material. Because the material of the package will be thermally distorted on this baking
temperature.
If baking should be done with keeping them in the package, please bake them 40 degree C for 192 hours or 60 degree C for 168 hours.
Please avoid to storing the products in the place where water condensation may be occurred. It is easy to water condensation in heated
dump air in which large temperature changes may condense water. Otherwise, the quality of characteristics may be reduced, and also the
solderability may be degraded.
13.3.2.
Please do not store the products in the places such as : in a dusty place, in a place exposed directly to sea breeze, in an atmosphere
containing corrosive gas (Cl2,NH3,SO2,NOX and so on).
13.4. Operational Environment and Operational Conditions
13.4.1. Operational Environment
The products are not waterproof, chemical-proof or rustproof.
In order to prevent leakage of electricity and abnormal temperature increase of the products,
do not use the products under the following circumstances:
(1) in an atmosphere containing corrosive gas (Cl2, NH3, SO2, NOX and so on)
(2) in a dusty place
(3) in a place exposed to direct sunlight
(4) in such a place where water splashes or in such a humid place where water condenses
(5) in a place exposed to sea breeze
(6) in any other places similar to the above (1)through (5)
13.4.2. Operational Conditions
Please use the products within specified values (power supply, temperature, input, output and load condition, and so on). Please
make sure that input voltage is in specified values. Input voltage may be changed by line impedance change etc.
If the product is used out of the specified values, the product may be broken, the quality is reduced, and even if the products can
endure the condition for short time, it may cause degradation of the reliability.
13.4.3. Note prior to use
If static electricity, over rated voltage or reverse voltage is applied to the products, it may cause defects in the products or
degrade the reliability.
Please avoid the following items:
(1)Apply voltage over rated voltage, reversed voltage or not-enough connection to 0V(DC) line in characteristic test.
(2)electrostatic discharge by production line and/or operator
(3)electrified product by electrostatic induction
Do not give an excessive mechanical shock. If the products are dropped to the floor hit to something etc., it may occur a crack
on mounted components, removal of mounted components or deterioration of electrical performance..
Do not bend this product more than 0.1mm.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.2.19
MYBSC0128CA*T DATA Sheet
14
13.5. Transportation
During transport the products, please pack them so that the package will not be damaged by mechanical vibration and also please
educate and guide a carrier to prevent rough handling.
If the products are transported to overseas (in particular, by sea), it is expected that the transportation environment is not good. Please
pack the products in the package designed on the consideration of mechanical strength, vibration-resistant and humidity-resistant.
The package of the products sold in Japan may not be suitable to oversea transportation. Please confirm us if it is suitable or not.
14. Request to customers
14.1. Be sure to provide an appropriate fail-safe function on your product to prevent a second damage caused by the abnormal function or the
failure of our product.
14.2. Please connect the input terminals with adequate polarity.
If polarity is wrong, it may break the DC-DC converter.
14.3. In the case of destruction of the DC-DC converter inside, a large input current may flow. Please add a diode and fuse as follow.
fuse
+
diode
+
IN
OUT
-
-
+
Load
※Please confirm to select a diode and fuse etc. on your application..
14.4. Limitation of Application
Please contact us before using our products for the applications listed below which require especially high reliability for the prevention of
defects, which might directly cause damage to the third party’s life, body or property.
①Aircraft equipment.
②Aerospace equipment.
③Undersea equipment.
④Power plant control equipment.
⑤Medical equipment.
⑥Transportation equipment (vehicles, trains, ships, etc.).
⑦Traffic signal equipment
⑧Disaster prevention /crime prevention equipment.
⑨Data-processing equipment.
⑩Application of similar complexity and/or reliability requirements to the applications listed in the above.
! Note
1. Please make sure that your product has been evaluated and confirmed against your specifications
when our product is mounted to your product.
2. All the items and parameters in this product specification have been prescribed on the premise that our product
is used for the purpose, under the condition and in the environment agreed upon between you and us.
You are requested not to use our product deviating from such agreement.
3. We consider it not appropriate to include other terms and conditions for transaction warranty in product
specifications, drawings or other technical documents. Therefore, if your technical documents as above include
such terms and conditions as warranty clause, product liability clause, or intellectual property infringement liability
cause, we will not be able to accept such terms and conditions unless they are based on the governmental regulation
or they are stated in a separate contract agreement.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2014.2.19
Similar pages