DATATRONICS DR358-2-473

February 12, 2007
SHIELDED SMD INDUCTOR DR358-2 SERIES
Features
z
z
z
z
z
Low Profile Surface Mount Design
Flat Top for Pick and Place
Inductance Range from 1.2µH to 220.0µH
Operating Temp. -20°C to +80°C
Tinned Leads with Leaded Solder is Available (note 7)
ELECTRICAL SPECIFICATIONS AT 25ºC
Part No.
DR358-2-122
DR358-2-182
DR358-2-222
DR358-2-272
DR358-2-332
DR358-2-392
DR358-2-472
DR358-2-562
DR358-2-682
DR358-2-822
DR358-2-103
DR358-2-123
DR358-2-153
DR358-2-183
DR358-2-223
DR358-2-273
DR358-2-333
DR358-2-393
DR358-2-473
DR358-2-563
DR358-2-683
DR358-2-823
DR358-2-104
DR358-2-124
DR358-2-154
DR358-2-184
DR358-2-224
Inductance
(µH) ± 30%
1.2
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
10.0
12.0
15.0
18.0
22.0
27.0
33.0
39.0
47.0
56.0
68.0
82.0
100.0
120.0
150.0
180.0
220.0
DCR
(Ω) Max.
0.023
0.027
0.031
0.043
0.049
0.064
0.072
0.100
0.108
0.117
0.128
0.131
0.149
0.166
0.235
0.261
0.378
0.383
0.587
0.624
0.699
0.914
1.020
1.270
1.350
1.540
1.650
I rated
(A) Max.
2.56
2.20
2.04
1.60
1.57
1.44
1.32
1.17
1.12
1.04
1.00
0.84
0.76
0.72
0.70
0.58
0.56
0.50
0.48
0.41
0.35
0.32
0.29
0.27
0.24
0.22
0.18
MECHANICAL OUTLINES
Notes:
1.
2.
3.
4.
5.
6.
7.
8.
DATATRONIC:
All dimensions are shown in millimeter “mm”
General tolerance ±0.2mm, unless other
specified
Inductance Test: 100kHz, 0.1Vrms
Irated for an approximate 40°C temperature rise
Irated for an approximate 35% drop maximum of
the initial value
Tape and reel quantity, 2000 pcs/reel
For non-RoHS parts replace DR prefix with 42(e.g. DR358-2 becomes 42-358-2)
Terminal finish is compliant to RoHS
requirements. Solder in accordance with J-STD020C.
28151Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Toll Free Tel: 888-889-5391 Fax: 951-928-7701
Email: [email protected]
499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290
All specifications are subject to change without notice.