RL801S THRU RL807S GLASS PASSIVATED SILICON RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 8.0 Amperes FEATURES Low leakage Low forward voltage drop High current capability High surge capability High reliability .049 (1.25 REF.) D2-PAK MECHANICAL DATA MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS .412 (10.46) .388 (9.86) o Ratings at 25 C ambient temperature unless otherwise specified. .098 (2.50) .083 (2.10) .202 (5.13) .198 (5.03) .055 (1.40) .047 (1.20) .036 (0.91) .028 (0.71) .069 (1.75) .626 (15.89) .578 (14.69) .337 (8.55) .321 (8.15) Case: D2-PAK molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 1.4 grams .126 (3.20) .110 (2.80) * * * * * .189 (4.80) .173 (4.40) .053 (1.35) .049 (1.25) .053 (1.35) * * * * * .020 (0.50) .012 (0.30) PIN 1 Single phase, half wave, 60 Hz, resistive or inductive load. K - HEATSINK PIN 2 For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) SYMBOL RL801S RL802S RL803S RL804S RL805S RL806S RL807S UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Volts RATINGS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current o at T C = 100 C Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Current Squared Time Typical Thermal Resistance (Note 1) Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range IO 8.0 Amps I FSM 125 Amps 2 It 64.8 A /S R Q JC 3.6 R Q JA 25 CJ 40 T J, T STG -55 to + 150 2 0 C/ W pF 0 C ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 8.0A DC Maximum DC Reverse Current at Rated DC Blocking Voltage @T A = 25 o C o @T A = 100 C SYMBOL RL801S VF IR NOTES : 1. Thermal Resistance : Heat-sink case mounted or if PCB mounted. 2. Measured at 1 MHz and applied reverse voltage of 4.0 volts. 3. "Fully ROHS compliant", "100% Sn plating (Pb-free)". 4. Available in Halogen-free epoxy by adding suffix -HF after the part nbr. RL802S RL803S RL804S 1.0 RL805S RL806S RL807S UNITS Volts 1.0 50 uAmps 2015-02 REV:O RATING AND CHARACTERISTICS CURVES ( RL801S THRU RL807S ) INSTANTANEOUS FORWARD CURRENT, (A) AVERAGE FORWARD CURRENT, (A) 10 8 6 4 Single Phase Half Wave 60 Hz Inductive or Resistive Load 2 0 0 50 100 150 40 20 10 4 1.0 0.4 0.1 0 O CASE TEMPERATURE, ( C) 1.0 1.5 2.0 2.5 3.0 3.5 L INSTANTANEOUS FIG.2 TYPICAL FORWARD CHAR RACTERISTICS 200 CT, JUNCTION CAPACITANCE, (pF) 1000 TA = 100 OC 100 10 O TA = 25 C 1.0 0 20 40 60 80 100 120 100 60 40 20 10 6 4 2 0 140 T J = 25 OC 0.1 0.2 0.4 1.0 PERCENT RATED PEAK REVERSE VOLTAGE, (%) 2 8.3mS Single Half Sine-Wave JEDEC Method 125 100 75 50 25 2 10 20 40 100 FIG.4 TYPICAL JUNCTION CAPACITANCE 150 0 1 4 REVERSE VOLTAGE, (V) FIG.3 TYPICAL REVERSE E CHARACTERISTICS PEAK FORWARD SURGE CURRENT, (A) INSTANTANEOUS REVERSE CURRENT, ( A) 0.5 INSTANTANEOUS FORWARD VOLTAGE, (V) FIG.1 TYPICAL FORWARD CURRENT DERATIING CURVE 0.1 T A = 25 OC Pulse Width = 300mS 1% Duty Cycle 5 10 20 50 100 NUMBER OF CYCLES AT 60Hz FIG.5 MAXIMUM NON-REPETITIIVE FORWARD SURGE CURRENT Marking Description V Y W W Rectron Logo Part No. R L 8 0 X Year – code (Y:Last digit of year & A:2010,B:2011……) Week – code (WW:01~52) Voltage-code 1-------50V 2-------100V 3-------200V 4-------400V 5-------600V 6-------800V 7------1000V PACKAGING OF DIODE AND BRIDGE RECTIFIERS BULK PACK EA PER BOX INNER BOX SIZE CARTON SIZE (mm) (mm) EA PER CARTON GROSS WEIGHT(Kg) PACKAGE PACKING CODE A-405 -B 1,000 194*84*21 415*220*255 50,000 15.64 BR-3/-6 -B 200 206*208*55 450*220*255 1,600 6.00 / 6.80 BR-8/-10 -B 200 236*236*50 497*251*282 2,000 12.24 BR-15/-25/-35/(W) -B 50 206*208*57 450*220*255 400 12.50 (14.40) DO-15 -B 500 194*84*21 415*220*255 25,000 12.74 DO-201 -B 500 300*73*40 347*320*271 12,000 15.90 DO-41 -B 1,000 194*75*21 415*220*255 50,000 16.2 HVM -B 200 165*214*52 353*226*290 2,000 --- HVP -B 40 236*236*40 502*251*145 240 8.80 MB-15/-25/-35(W) -B 50 206*208*57 450*220*255 400 13.60 (14.30) MP-15/-25/-35(W) -B 50 206*208*57 450*220*255 400 7.7 (8.26) R-1/-3 -B 1000 / 500 192*75*21 415*220*255 50,000 / 25,000 11.74 / 16.17 R-6/R-7 -B 200 300*73*40 347*320*271 4,800 12.93 / 14.57 RB-15 -B 1,000 165*252*59 347*320*271 10,000 11.6 RBU -B 450 240*239*35 502*251*126 2,700 13.00 RC-2 -B 600 165*252*59 347*320*271 6,000 9.4 RS-1 -B 600 240*239*35 497*255*162 4,800 9.264 RS-2L -B 400 210*160*52 502*251*126 2,400 8.59 RS-4L -B 300 230*162*52 502*251*126 1,800 11.3 RS-6/-8 -B 200 236*236*34 497*255*162 1,600 13.6 / 14.5 RS-1M -B 600 240*239*35 497*255*162 4,800 8.62 RS-2M -B 600 236*236*40 502*251*145 3,600 10.28 RS-4M/-10M -B 600 236*236*40 497*251*100 2,400 11.09 RS-6/8/15/20/25M -B 300 230*190*46 410*243*157 1,800 13.37 WOM -B 600 165*252*59 347*320*271 6,000 11.0 PACKAGE PACKING CODE EA PER BOX INNER BOX SIZE CARTON SIZE (mm) (mm) EA PER CARTON WEIGHT(Kg) BDB -C 2,000 450*140*84 464*305*283 12,000 14.18 D2PAK -C 2,000 550*140*92 572*308*120 4,000 10.20 DB-1 -C 2,500 450*140*84 464*305*283 15,000 14.30 DB-LS -C 4,000 450*140*84 464*305*283 24,000 16.45 DB-S -C 4,000 450*140*84 464*305*283 24,000 18.44 RBU -C 1,000 490*135*110 510*293*131 2,000 13.62 RS-1M/-2M -C 1,350 540*118*118 560*259*144 2,700 12.03 RS-4M/-10M -C 900 540*118*118 560*259*144 1,800 12.82 RS-6/8/15/20/25M -C 600 490*135*110 510*293*131 1,200 13.12 (I)TO-220/TO-220(A) -C 2,000 550*140*92 572*308*120 4,000 11.80 TO-247 -C 900 550*140*92 572*308*120 1,800 7.60 TUBE PACK Visit http:// www.rectron.com for complete datasheets D34 DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.