02n17-02n19.pdf

02N17
THRU
02N19
SCHOTTKY BARRIER RECTIFIER
VOLTAGE RANGE 20 to 40 Volts CURRENT 0.2 Ampere
FEATURES
*
*
*
*
*
*
*
Low power loss, high efficiency
Low leakage
Low forward voltage
High current capability
High speed switching
High surge capabitity
High reliability
R-1
MECHANICAL DATA
*
*
*
*
*
Case: Molded plastic
Epoxy: Device has UL flammability classification 94V-O
Lead: MIL-STD-202E method 208C guaranteed
Mounting position: Any
Weight: 0.12 gram
.787 (20.0)
MIN.
.025 (0.65)
DIA.
.021 (0.55)
.126 (3.2)
.106 (2.7)
.102 (2.6)
DIA.
.091 (2.3)
.787 (20.0)
MIN.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 o C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Dimensions in inches and (millimeters)
MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted)
SYMBOL
02N17
02N18
02N19
UNITS
Maximum Recurrent Peak Reverse Voltage
VRRM
20
30
40
Volts
Maximum RMS Voltage
VRMS
14
21
28
Volts
VDC
20
30
40
Volts
RATINGS
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
.375” (9.5mm) lead length at T A =110 OC
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Typical Thermal Resistance (Note 3)
IO
0.2
Amps
I FSM
60
Amps
RqJA
60
RqJL
20
0
C/W
Typical Junction Capacitance (Note 1)
CJ
110
Operating Temperature Range
TJ
150
0
C
T STG
-55 to + 150
0
C
Storage Temperature Range
pF
ELECTRICAL CHARACTERISTICS (@TA=25 C unless otherwise noted)
O
CHARACTERISTICS
SYMBOL
Maximum Instantaneous Forward Voltage at 0.2A DC
Maximum Average Reverse Current
@T A = 25 o C
at Rated DC Blocking Voltage
@T A = 100o C
NOTES : 1. Measured at 1 MHz and applied reverse voltage of 4.0 volts.
2. “Fully ROHS compliant”, “100% Sn plating (Pb-free)”.
3. Thermal Resistance : At 9.5mm lead lengths, PCB mounted.
VF
IR
02N17
02N18
02N19
UNITS
.28
Volts
1.0
mAmps
10
mAmps
2006-11
AVERAGE FORWARD CURRENT, (A)
0.2
0.15
0.1
Single
Half Wave 60HZ
Resistive or
Inductive Load
0.375" (9.5mm) Lead Length
0.05
0
0
25
50
75
100
125
150
175
INSTANTANEOUS FORWARD CURRENT, (A)
RATING AND CHARACTERISTICS CURVES ( 02N17 THRU 02N19 )
20
10
1.0
0.1
TJ = 25 OC
Pulse Width = 300mS
1% Duty Cycle
0.1
0.3
O
10
TA = 125 OC
1.0 TA = 75 OC
0.1 T = 25 OC
A
0.01
0.001
0
20
40
60
80
0.7
0.9
1.1
1.3 1.5
1.7
1.9
2.1
100
120
FIG.2 TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
400
CT, TOTAL CAPACITANCE, (pF)
100
0.5
INSTANTANEOUS FORWARD VOLTAGE, (V)
FIG.1 TYPICAL FORWARD CURRENT
DERATING CURVE
TJ = 25 OC
200
100
80
60
40
20
10
140
0.1
0.4
PERCENT RATED PEAK REVERSE VOLTAGE, (%)
1.0
4
8.3mS Single Half Sine-Wave
JEDEC Method
50
40
30
20
2
40
FIG.4 TYPICAL JUNCTION CAPACITANCE
60
10
1
10
REVERSE VOLTAGE, (V)
FIG.3 TYPICAL REVERSE CHARACTERISTICS
PEAK FORWARD SURGE CURRENT, (A)
INSTANTANEOUS REVERSE CURRENT, (mA)
LEAD TEMPERATURE, ( C)
4
6
8
10
20
40
80 100
NUMBER OF CYCLES AT 60Hz
FIG.5 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT
80
DISCLAIMER NOTICE
Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.
Similar pages