AH9250

AH9250
HIGH SENSITIVITY MICROPOWER
OMNIPOLAR HALL-EFFECT SWITCH
Description
Pin Assignments
NEW PRODUCT
The AH9250 is a high sensitivity Hall-effect switch with internal pull-up
resistor on the output, designed for battery operated handheld
equipments to industrial applications.
(Front View)
A chopper stabilized architecture improves stability of magnetic switch
points over the whole operating range. A sleep-awake logic controls
the sleep and awake time to reduce the average operating current of
the device. During the awake time, the output is changed with the
magnetic flux density. During the sleep time, the output is latched in
its previous state and the current consumption reduces to 4µA typical
at 3V. The average current consumption is 8µA at 3V.
3
OUTPUT
2
GND
1
VDD
TO92S
The output can be switched on with either north or south pole of
sufficient strength. If the magnetic flux density perpendicular to the
part marking surface is larger than operating point (BOP), the output
will be turned on; if it is less than releasing point (B RP), the output will
be turned off.
(Top View)
GND
The AH9250 is available in industry standard TO92S and SC59
packages.
3
Features












Omnipolar Operation (Switching with North or South Poles)
2.5V to 5.5V Power Supply
Micropower Operation
Built in Pull-up Resistor on the Output
Stabilized Chopper
Superior Temperature Stability
Digital Output Signal
-40°C to +85°C Operating Temperature
ESD (HBM): 5000V
Small Low Profile Industry Standard SC59 and TO92S Packages
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Notes:
1
2
VDD
OUTPUT
SC59
Applications





Cover Switch in Notebook PC/PDA
Handheld Wireless Applications Proximity Detection Switches
Doors, Lids, Covers and Tray Position Detect Switches
Liquid Level Detection
Battery Powered Consumer, Home Appliances and Industrial
Applications
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
AH9250
Document number: DS38217 Rev.1 - 2
1 of 10
www.diodes.com
September 2015
© Diodes Incorporated
AH9250
Typical Applications Circuit
2
1
VDD
NEW PRODUCT
OUTPUT
AH9250
100pF
2.5V to 5.5V
10nF
GND
3
Pin Descriptions
Pin Number
Pin Name
Function
TO92S
SC59
1
1
VDD
2
3
GND
Ground pin
3
2
OUTPUT
Output pin
Power supply pin
Functional Block Diagram
VDD
1(1)
Sleep/Awake
Control
Timing
Logic
Bias
100k
Hall
Plate
+
3(2)
OUTPUT
Chopper
Comparator
2(3)
GND
A (B)
A for TO92S
B for SC59
AH9250
Document number: DS38217 Rev.1 - 2
2 of 10
www.diodes.com
September 2015
© Diodes Incorporated
AH9250
Absolute Maximum Ratings (Note 4) (@TA = +25°C, unless otherwise specified.)
NEW PRODUCT
Symbol
Notes:
Rating
Unit
VDD
Supply Voltage (Note 5)
Parameter
7
V
IDD
Supply Current (Fault)
6
mA
VOUT
Output Voltage
7
V
IOUT
Output Current
B
Magnetic Flux Density
PD
Power Dissipation
2
mA
Unlimited
Gauss
TO92S
230
SC59
230
mW
TSTG
Storage Temperature
-55 to +150
C
TJ
Junction Temperature
+150
C
–
ESD (Human Body Model) (Note 6)
5000
V
–
ESD (Machine Model) (Note 6)
400
V
4. Stresses greater than the 'Absolute Maximum Ratings' specified above may cause permanent damage to the device. These are stress ratings only;
functional operation of the device at these or any other conditions exceeding those indicated in this specification is not implied. Device reliability may be
affected by exposure to absolute maximum rating conditions for extended periods of time.
5. The absolute maximum VDD of 7V is a transient stress rating and is not meant as a functional operating condition. It is not recommended to operate the
device at the absolute maximum rated conditions for any period of time.
6. Electronic semiconductor products are sensitive to Electro Static Discharge (ESD). Always observe Electro Static Discharge control procedures
whenever handling semiconductor products.
Recommended Operating Conditions
Symbol
VDD
TA
Characteristic
Max
Unit
Operating
2.5
5.5
V
Operating Temperature Range
Operating
-40
+85
°C
Symbol
(Note 7) (@TA = +25°C, VDD = 3V, unless otherwise specified.)
Characteristic
Conditions
Min
Typ
Max
Unit
2.5
3
5.5
V
Supply Voltage
Operating
IDD_AW
Supply Current During “Awake”
Period
TA = -40 to +85C, VDD = 2.5V to 5.5V
–
1.8
3
mA
IDD_SL
Supply Current During “Sleep” Period
TA = -40 to +85C, VDD = 2.5V to 5.5V
–
4
10
µA
Average Supply Current
TA = -40 to +85C, VDD = 2.5V to 5.5V
–
8
15
µA
IOUT
Output Current
–
–
–
1.0
mA
IOFF
Output Leakage Current
VOUT = 5.5V, Output off
–
<0.1
1
µA
Output Saturation Voltage
IOUT = 1.0mA, Output on
–
–
0.4
V
tAW
Awake Mode Time
Operating
–
150
–
µs
tSL
Sleep Mode Time
Operating
–
100
–
ms
D
Duty Cycle
–
–
0.15
–
%
fC
Chopper Frequency
–
–
15
–
kHz
IDD_AVG
VOUT (SAT)
Note:
Min
Supply Voltage
Electrical Characteristics
VDD
Conditions
7. Parameters values over operating temperature range are not tested in production, they are guaranteed by design, process control and characterization.
The magnetic characteristics may vary with supply voltage, operating temperature and after soldering.
AH9250
Document number: DS38217 Rev.1 - 2
3 of 10
www.diodes.com
September 2015
© Diodes Incorporated
AH9250
Electrical Characteristics
(Cont.) (@TA = +25°C, VDD = 3V, unless otherwise specified.)
tPERIOD
tAWAKE
IDD_AW
Sample and Output
Latched
IDD_AVG
IDD_SL
0
Magnetic Characteristics (Notes 8 & 9) (@TA = -40°C to +85°C, VDD = 3V, unless otherwise specified.)
(1mT=10 Gauss)
Symbol
Parameter
BOPS (South Pole to Part Marking Side)
Conditions
Min
Typ
Max
Unit
B>BOPS,VOUT=Low (output on)
30
40
50
Gauss
B>BOPN,VOUT=Low (output on)
-50
-40
-30
Gauss
B<BRPS,VOUT=High (output off)
20
30
40
Gauss
B<BRPN,VOUT=High (output off)
-40
-30
-20
Gauss
–
10
–
Gauss
Operating Point
BOPN (North Pole to Part Marking Side)
BRPS (South Pole to Part Marking Side)
Releasing Point
BRPN (North Pole to Part Marking Side)
BHYS ( ︱BOPX - BRPX︱)
Notes:
Hysteresis
(Note 9)
8. Parameters values over operating temperature range are not tested in production, they are guaranteed by design, process control and characterization.
The magnetic characteristics may vary with supply voltage, operating temperature and after soldering.
9. Maximum and minimum hysteresis is guaranteed by design and characterization.
BOPX=operating point (output turns on); BRPX=releasing point (output turns off)
Operating Characteristics
Output Off
High
BOPN
BOPS
Output Voltage
NEW PRODUCT
tSLEEP
BRPN
BRPS
Low
-B
0
Output On
+B
Magnetic Flux Density (Gauss)
Output Voltage vs. Magnetic Flux Density
AH9250
Document number: DS38217 Rev.1 - 2
4 of 10
www.diodes.com
September 2015
© Diodes Incorporated
AH9250
Performance Characteristics
BOP/BRP vs. Ambient Temperature
80
60
60
40
40
BOP/BRP (GS)
BOP/BRP (GS)
80
BOPS
20
BRPS
0
BOPN
BRPN
-20
20
BRPS
-20
BRPN
-40
-60
-60
2.5
3.0
3.5
4.0
4.5
5.0
BOPS
0
-40
BOPN
-80
-40
-80
5.5
-20
0
20
40
60
80
100
O
Ambient Temperature ( C)
VDD (V)
Average Supply Current vs. Supply Voltage
Awake Mode Time vs. Supply Voltage
300
3.0
250
2.5
200
tAWAKE (s)
IAWAKE (mA)
2.0
1.5
150
100
1.0
50
0.5
0.0
2.5
0
3.0
3.5
4.0
4.5
5.0
5.5
2.5
3.0
3.5
4.0
4.5
5.0
5.5
VDD (V)
VDD (V)
Sleep Mode Time vs. Supply Voltage
200
175
150
tASLEEP (ms)
NEW PRODUCT
BOP/BRP vs. Supply Voltage
125
100
75
50
25
0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
VDD (V)
AH9250
Document number: DS38217 Rev.1 - 2
5 of 10
www.diodes.com
September 2015
© Diodes Incorporated
AH9250
Thermal Performance
Power Dissipation De-rating Curve
(1) Package Types: SC59 and TO92S
TA (C)
PD (mW)
-40
230
0
230
25
230
50
184
60
166
70
147
80
129
85
120
90
110
100
92
110
74
120
55
130
37
140
18
150
0
Power Dissipation Curve
PD (mW)
NEW PRODUCT
300
200
100
0
0
-40
25
50
75
85
100
125
150
TA (oC)
Ordering Information
AH9250 - X - X
Product Name
Package
P : TO92S
W : SC59
Packing
B : Bulk
7 : 7" Tape & Reel
Device
Package
Code
Packaging
Bulk
Quantity
7” Tape and Reel
Quantity
AH9250-P-B
AH9250-W-7
P
W
TO92S
SC59
1000/Bulk
NA
NA
3000/Tape & Reel
AH9250
Document number: DS38217 Rev.1 - 2
6 of 10
www.diodes.com
September 2015
© Diodes Incorporated
AH9250
Marking Information
(1)
Package Type: TO92S
(Front View)
Part Number
Y : Year : 0~ 9
WW : Week : 01 ~ 52 , "52 " represents
52 and 53 week
X : Internal Code
9250
NEW PRODUCT
Y WW X
(2)
Part Number
Package
Identification Code
AH9250
TO92S
9250
Package Type: SC59
( Top View )
XX Y W X
AH9250
Document number: DS38217 Rev.1 - 2
XX : Identification Code
Y : Year : 0 to 9
W : Week : A to Z : 1 to 26 week;
a to z : 27 to 52 week; z represents
52 and 53 week
X : Internal Code
Part Number
Package
Identification Code
AH9250
SC59
HS
7 of 10
www.diodes.com
September 2015
© Diodes Incorporated
AH9250
Package Outline Dimensions (All dimensions in mm.)
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
(1)
Package Type: TO92S(TYPE B)
A
c
E
b2
A2
b
e
D
0
L1
Dim
A
A2
b
b2
c
D
E
e
L
L1
θ
TO92S (TYPE B)
Min
Max
Typ
1.420
1.620
0.750
0.360
0.480
0.380
0.550
0.360
0.510
3.850
4.150
2.900
3.310
1.270
14.000 15.500
1.600
44°
46°
All Dimensions in mm
Min/Max(in mm)
0.4/0.5
1.85/2.15
1.05/1.35
Hall Sensor
1
2
Die
NEW PRODUCT
L
PART
MARKING
SURFACE
3
Sensor Location
AH9250
Document number: DS38217 Rev.1 - 2
8 of 10
www.diodes.com
September 2015
© Diodes Incorporated
AH9250
Package Outline Dimensions (All dimensions in mm.)
(Cont.)
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
(2)
Package Type: SC59
A
SC59
Min
Max
Typ
0.35
0.50
0.38
B
1.50
1.70
1.60
C
2.70
3.00
2.80
D
0.95
G
1.90
H
2.90
3.10
3.00
J
0.013 0.10
0.05
K
1.00
1.30
1.10
L
0.35
0.55
0.40
M
0.10
0.20
0.15
N
0.70
0.80
0.75
0°
8°

All Dimensions in mm
Dim
A
NEW PRODUCT
B C
G
H
K
M
N
J
L
D
0.595/0.715
1.5/1.7
0.65/0.85
Min/Max(in mm)
PART
MARKING
SURFACE
Die
Hall Sensor
PIN1
Sensor Location
Suggested Pad Layout
Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version.
(1)
Package Type: SC59
Y
Z
Dimensions Value (in mm)
Z
3.4
X
0.8
Y
1.0
C
2.4
E
1.35
C
X
AH9250
Document number: DS38217 Rev.1 - 2
E
9 of 10
www.diodes.com
September 2015
© Diodes Incorporated
AH9250
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
NEW PRODUCT
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2015, Diodes Incorporated
www.diodes.com
AH9250
Document number: DS38217 Rev.1 - 2
10 of 10
www.diodes.com
September 2015
© Diodes Incorporated