APX4558

APX4558
DUAL CHANNEL LOW NOISE GENERAL PURPOSE
OPERATIONAL AMPLIFIER
Description
Pin Assignments
(Top View)
The APX4558 device is a dual low noise operational
amplifier. The wide bandwidth and low noise make it very
suited to audio applications.
1OUT 1
1IN- 2
The device is short-circuit protected, and the internal
frequency compensation ensures stability without external
components.
1IN+
3
VCC- 4
8
VCC+
7
2OUT
6
5
2IN2IN+
NEW PRODUCT
SO-8
Features
Applications
•
•
Unity-Gain Bandwidth . . . 3 MHz typical
Gain and Phase match between amplifiers
•
Audio pre amps
•
RCA line out buffers
•
Low Noise . . . 8 nV/ Hz typical at 1 kHz
•
•
•
•
•
Wide Common-Mode and Differential voltage ranges
No frequency compensation required
Low power consumption
No latch-up
Green mold compound (No Br, Sb) (Note 1)
Notes:
1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at
http://www.diodes.com/products/lead_free.html.
Schematic Diagram
Vcc+
IN-
IN+
OUT
Vcc-
APX4558
Document number: DS35022 Rev. 4 - 2
1 of 10
www.diodes.com
January 2011
© Diodes Incorporated
APX4558
DUAL CHANNEL LOW NOISE GENERAL PURPOSE
OPERATIONAL AMPLIFIER
NEW PRODUCT
Pin Descriptions
Pin #
Name
Description
1
1OUT
2
1IN-
Amplifier 1 inverting input
3
1IN+
Amplifier 1 non-inverting input
Amplifier 1 output
4
VCC-
Negative supply pin for amplifier 1 and amplifier 2
5
2IN+
Amplifier 2 non-inverting input
6
2IN-
Amplifier 2 inverting input
7
2OUT
8
VCC+
Amplifier 2 output
Positive supply pin for amplifier 1 and amplifier 2.
Absolute Maximum Ratings (Note 2)
Symbol
VCC+
VCC-
Parameter
Rating
18
Supply voltage (Note 3)
V
-18
VID
Differential input voltage (Note 4)
±30
V
VI
Input voltage (any input) (Note 3, 5)
±15
V
Duration of output short circuit to ground, one
amplifier at a time (Note 6)
TJ
TSTG
Notes:
Unit
Junction Temperature (Note 7)
Storage Temperature
Unlimited
150
°C
-65 to 150
°C
2. Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied.
Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
3. All voltage values, unless otherwise noted, are with respect to the midpoint between VCC+ and VCC–.
4. Differential voltages are at IN+ with respect to IN–.
5. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less.
6. Temperature and/or supply voltages must be limited to ensure that the dissipation rating is not exceeded.
7. Maximum power dissipation is a function of TJ (max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature
is PD = (TJ (max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability.
Recommended Operating Conditions
Symbol
VCC+
VCCTA
Parameter
Min
Max
5
15
-5
-15
APX4558
0
70
APX4558I
-40
105
Supply voltage (Note 3)
Operating Ambient
Temperature Range
APX4558
Document number: DS35022 Rev. 4 - 2
2 of 10
www.diodes.com
Unit
V
°C
January 2011
© Diodes Incorporated
APX4558
DUAL CHANNEL LOW NOISE GENERAL PURPOSE
OPERATIONAL AMPLIFIER
Electrical Characteristics (VCC± = ±15V, TA = 25C, unless otherwise stated)
Symbol
Parameter
Conditions
TA
Min
Typ.
Max
Unit
NEW PRODUCT
AC Characteristics
VIO
Input offset voltage
VO = 0V
IIO
Input offset current
VO = 0V
IIB
Input bias current
VO = 0V
25°C
VOM
Maximum output voltage swing
AVD
Large-signal differential voltage
amplification
RIN
Input resistance
5
Full temp
150
Full temp
RL = 2kΩ
RL ≥ 2kΩ
VO = ±10V
200
300
25°C
RL = 10kΩ
6
7.5
25°C
Common-mode input voltage
range
VICR
0.5
Full temp
500
800
mV
nA
nA
25°C
±12
±14
V
25°C
±12
±14
25°C
±10
±13
Full temp
±10
25°C
20
Full temp
15
25°C
0.3
5
MΩ
V
300
V/mV
CMRR
Common-mode rejection ratio
VIN = VICR(Min)
25°C
70
90
dB
PSRR
Power supply rejection ratio
VCC± = ±15V to ±9V
25°C
76
90
dB
25°C
ICC
Supply current both amplifiers
VO = 0V, No load
2.5
5.6
TA min
3
6.6
TA max
2.3
5
mA
25°C
3
MHz
1.7
V/µs
8
nV/ Hz
AC Characteristics
B1
Unity-gain bandwidth
SR
Slew rate at unity gain
VI = ±10V, RL = 2kΩ,
CL = 100pF
vn
Equivalent input noise voltage
(closed loop)
G=100, RS = 100Ω
F = 1kHz, BW = 1Hz
VO1/VO2
Crosstalk attenuation
Rise time
overshoot
tr
Open loop
G = 100
RS = 1kΩ
f = 10kHz
VI = 20mV, RL = 2kΩ,
CL = 100pF
25°C
25°C
1.1
25°C
85
dB
105
25°C
0.13
µs
25°C
5
%
25°C
75
170
TA min
90
200
TA max
70
150
Power and Thermal Characteristics
PD
Total power dissipation both
amplifiers
θJA
Thermal Resistance Junction-toSO-8 (Note 8)
Ambient
130
°C/W
θJC
Thermal Resistance Junction-toSO-8 Note 8)
Case
15
°C/W
Notes:
VO = 0V, No load
mW
8. Test condition for SO-8: Device mounted on FR-4 substrate PC board, with minimum recommended pad layout
9. Full temp is specified as 0 to 70°C for the APX4558 and -40 to 105°C for the APX48558I
APX4558
Document number: DS35022 Rev. 4 - 2
3 of 10
www.diodes.com
January 2011
© Diodes Incorporated
APX4558
DUAL CHANNEL LOW NOISE GENERAL PURPOSE
OPERATIONAL AMPLIFIER
Typical Performance Characteristics
6
6
5
5
ICC – Supply Current – mA
4
3
2
1
4
3
2
1
0
0
2
4
6
8
-50
10 12 14 16 18 20
-25
25
50
75
GAIN AND PHASE vs FREQUENCY
(VCC =±15V, RL =2kΩ, CL =22pF)
40
0
-20
-20
30
Gain
-80
-100
10
Phase
-120
0
-10
-60
Gain
10
-120
0
-140
-160
-10
-180
-20
100
1000
-200
10000
-180
-20
100
Document number: DS35022 Rev. 4 - 2
1000
-200
10000
f – Frequency – kHz
f – Frequency – kHz
APX4558
-80
-100
Phase
-140
-160
-40
20
Gain – dB
-60
Phase – deg
-40
20
125
GAIN AND PHASE vs FREQUENCY
(VCC =±15V, RL =10kΩ, CL =22pF)
0
30
100
TA – Temperature – °C
VCC – Supply Voltage – V
40
0
Phase – deg
ICC – Supply Current – mA
SUPPLY CURRENT vs TEMPERATURE
(VCC =±15V)
0
Gain – dB
NEW PRODUCT
SUPPLY CURRENT vs SUPPLY VOLTAGE
(TA=25°C)
4 of 10
www.diodes.com
January 2011
© Diodes Incorporated
APX4558
DUAL CHANNEL LOW NOISE GENERAL PURPOSE
OPERATIONAL AMPLIFIER
Typical Performance Characteristics (Continued)
OUTPUT VOLTAGE SWING
vs SUPPLY VOLTAGE
(RL =2kΩ, TA=25°C)
V OM – Output Voltage Swing – V
VOM – Output Voltage Swing – V
30
10
5
0
-5
-10
-15
25
20
15
10
5
0
32
8
10
12
14
16
VCC – Supply Voltage – V
18
OUTPUT VOLTAGE SWING
vs LOAD RESISTANCE
(VCC =±15V, TA=25°C)
30
28
26
24
22
20
18
16
14
12
100
1
VOM – Output Voltage Swing – V
6
VOM – Output Voltage Swing – V
NEW PRODUCT
15
OUTPUT VOLTAGE SWING
vs FREQUENCY
(VCC =±15V, RL =2kΩ, TA=25°C)
10
100
1k
10k
f – Frequency – Hz
100k
1M
OUTPUT VOLTAGE SWING
vs TEMPERATURE
(VCC =±15V, RL =10kΩ)
15
14
13
12
11
10
1000
RL – Load Resistance – Ω
APX4558
Document number: DS35022 Rev. 4 - 2
10000
5 of 10
www.diodes.com
-50
-25
0
25
50
75
TA – Temperature – °C
100
125
January 2011
© Diodes Incorporated
APX4558
DUAL CHANNEL LOW NOISE GENERAL PURPOSE
OPERATIONAL AMPLIFIER
-10
OPEN LOOP GAIN vs FREQUENCY
(VCC =±15V, RL =2kΩ, CL =22pF, TA=25°C)
GM – Open Loop Gain – dB
–VOM – Output Voltage Swing – V
NEGATIVE OUTPUT VOLTAGE SWING
vs TEMPERATURE
(VCC =±15V, RL =10kΩ)
-11
-12
-13
-14
-15
-50
-25
0
25
50
75
T A – Temperature – °C
100
125
120
110
100
90
80
70
60
50
40
30
20
10
0
100
INPUT BIAS CURRENT vs TEMPERATURE
(VCC =±15V)
1k
10k
100k
f – Frequency – Hz
1M
10M
INPUT OFFSET VOLTAGE vs TEMPERATURE
(VCC =±15V)
0.003
VIO – Input Offset Voltage – V
120
IIB – Input Bias Current – nA
NEW PRODUCT
Typical Performance Characteristics (Continued)
100
80
60
40
20
0
0.002
0.001
0
-0.001
-0.002
-0.003
-50
-25
0
25
50
75
100
125
TA – Temperature – °C
APX4558
Document number: DS35022 Rev. 4 - 2
6 of 10
www.diodes.com
-50
-25
0
25
50
75
TA – Temperature – °C
100
125
January 2011
© Diodes Incorporated
APX4558
DUAL CHANNEL LOW NOISE GENERAL PURPOSE
OPERATIONAL AMPLIFIER
Typical Performance Characteristics (Continued)
INPUT NOISE VOLTAGE vs FREQUENCY
(VCC= ±15V TA= 25ºC)
VN - Input Noise Voltage (nV/√Hz)
NEW PRODUCT
20.0
18.0
16.0
14.0
12.0
10.0
8.0
6.0
4.0
2.0
0.0
100
1k
10k
100k
f - Frequency (Hz)
APX4558
Document number: DS35022 Rev. 4 - 2
7 of 10
www.diodes.com
January 2011
© Diodes Incorporated
APX4558
DUAL CHANNEL LOW NOISE GENERAL PURPOSE
OPERATIONAL AMPLIFIER
Ordering Information
NEW PRODUCT
APX4558x S - 13
Operating
temperature range
Package
None: 0 to 70°C
I: -40 to 105°C
S: SO-8
Packing
13: Tape and Reel
13” Tape and Reel
Device
Package
Code
Packaging
(Note 10)
Quantity
Part Number Suffix
APX4558S-13
S
SO-8
2500/Tape & Reel
-13
APX4558IS-13
S
SO-8
2500/Tape & Reel
-13
Notes:
10. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
Marking Information
SO-8
(Top View)
8
Logo
Part Number
APX4558x
YYWWX X
1
APX4558
Document number: DS35022 Rev. 4 - 2
5
X : A~Z : Internal code
YY : Year : 08, 09,10~
WW : Week : 01~52; 52
represents 52 and 53 week
X : Internal Code
4
8 of 10
www.diodes.com
January 2011
© Diodes Incorporated
APX4558
DUAL CHANNEL LOW NOISE GENERAL PURPOSE
OPERATIONAL AMPLIFIER
Package Outline Dimensions (All Dimensions in mm)
0.254
0.10/0.20
3.85/3.95
5.90/6.10
SO-8
Gauge Plane
Seating Plane
0.62/0.82
Detail "A"
0.15/0.25
1.30/1.50
0.35max. 45°
1.75max.
NEW PRODUCT
7°~9°
7°~9°
Detail "A"
0°/8°
0.3/0.5
1.27typ
4.85/4.95
5.4
8x-0.60
8x-1.55
6x-1.27
Land Pattern Recommendation
(Unit: mm)
APX4558
Document number: DS35022 Rev. 4 - 2
9 of 10
www.diodes.com
January 2011
© Diodes Incorporated
APX4558
DUAL CHANNEL LOW NOISE GENERAL PURPOSE
OPERATIONAL AMPLIFIER
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS
DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
NEW PRODUCT
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other
changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability
arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any
license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described
herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies
whose products are represented on Diodes Incorporated website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized
sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall
indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names
and markings noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without
the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided
in the labeling can be reasonably expected to result in significant injury to the user.
B.
A critical component is any component in a life support device or system whose failure to perform can be reasonably expected
to cause the failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or
systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements
concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems,
notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further,
Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes
Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2011, Diodes Incorporated
www.diodes.com
APX4558
Document number: DS35022 Rev. 4 - 2
10 of 10
www.diodes.com
January 2011
© Diodes Incorporated
Similar pages