Product Overview RUGGEDCOM RX1510/1511/1512 Utility Grade Layer 2/3 Switch and Router The RUGGEDCOM RX1510 series from Siemens is a cost efficient utility grade layer 2 /3 switch and router in a compact form factor that makes it ideal for pole mount applications or installation into tight cabinets. The RX1510’s modular and field replaceable routing/switching platform allows customers to select amongst WAN, serial, and Ethernet options giving it the required versatility for electric power utilities, rail and traffic control systems, and the industrial plant floor. The RX1510 series consists of the RX1510, RX1511, and the RX1512, all of which are compact form factor devices that feature modular, field replaceable, multi-service platforms with integrated cyber security. The RX1510 provides for two (2) redundant load sharing power modules and four (4) line module slots, the RX1511 provides for one (1) power module and two (2) line module slots, and the RX1512 provides for an internal DC power supply and two (2) line module slots. The versatility and wide selection of power modules and line modules, including an Application Process Engine (APE) to create a utility-grade processing platform, allows the RX1510 series to be used in a variety of applications. surges. An operating temperature range of -40°C to +85°C coupled with hazardous location compliance (Class 1 Division 2), optional conformal coating and an aluminum enclosure allows the RX1510 to be placed in almost any location. The embedded ROX II (Rugged Operating System on Linux) combines Layer 2 switching functions, Layer 3 routing functions, along with advanced cyber security features and comprehensive networking functions to provide a full array of intelligent functionality for high network availability and manageability. Coupled with the with ruggedness and durability that is designed in from the onset, the RX1510 is ideal for creating mission-critical, real-time, control applications where high reliability and availability is of paramount importance. All RUGGEDCOM products are backed by a five year warranty and unsurpassed technical support. Designed to operate reliably in harsh environments, the RX1510 series provides a high level of immunity to electromagnetic interference (EMI) and heavy electrical usa.siemens.com/ruggedcom Features and Benefits Security Appliance Functions ■ Integrated firewall ■IPSec ■VPN ■ HTTPS ■ Dead Peer Detection ■ Brute Force Attack Prevention Multi-level passwords ■ SSH/SSL encryption ■ Enable/disable ports, MAC based port security ■ Port based network access control (802.1x) ■ VLAN (802.1Q) to segregate and secure network traffic ■ RADIUS centralized password management ■ SNMPv3 encrypted authentication and access security Rugged Rated for Reliability in Harsh Environments ■ Immunity to EMI and high voltage electrical transients - Meets IEEE 1613 (electric utility substations) - Exceeds IEC 61850-3 (electric utility substations) - Exceeds IEC 61800-3 (variable speed drive systems) - Exceeds IEC 61000-6-2 (generic industrial) - Exceeds NEMA TS-2 (traffic control equipment) Physical Ports ■ Field replaceable line modules ■ Up to 24-ports 100FX (RX1510) ■ Up to 24-ports 10/100TX (RX1510) ■ Up to 8-ports Gigabit Ethernet (RX1510) WAN Port Options ■ T1/E1 (channelized) ■ E1 75 Ohms via BNC ■ Cellular (HSPA / EVDO)* ■ 56K/64K DDS Serial Ports ■ Fully compliant EIA/TIA RS485, RS422, RS232 serial ports (software selectable) – RJ45 connectors ■ DNP, MODBUS ■ Raw socket mode support allows encapsulation of any byte oriented serial protocol Advanced Services ■ MPLS Static Label Support ■ MPLS Label Distribution Protocol (LDP) ■ -40°C to +85°C operating temperature (no fans) ■ Failsafe Output Relay: For critical failure or error alarming *Carrier approvals may be required 2 RUGGEDCOM RX1510 / RX1511 / RX1512 Utility Grade Layer 2/3 Switch and Router Features and Benefits Protocols Management Tools ■ WAN - Frame Relay RFC 1490 or RFC 1294 ■ Web-based, SSH, CLI management interfaces - PPP RFC 1661, 1332, 1321, 1334, PAP, CHAP Authentication ■ NETCONF - Multilink PPP RFC 1990 - GOOSE messaging support ■ IP - Routing: OSPF, BGP, IS-IS, RIPv1 and v2 - VRRPv2 and VRRPv3 - Traffic control, NTP Server, IP Multicast Routing - L2TPv2 and L2TPv3 - DHCP Agent (Option 82 Capable) - PIM-SM Frame Relay Support ■ ISO and ITU compliant, network certified ■ ANSI T1.617 Annex D, Q.933 or LMI Local Signaling USB Mass Storage ■ Configure ROX II from the USB ■ Upgrade/Downgrade Firmware ■ Backup Files Utility Grade Layer 2/3 Switch and Router ■ SNMP v1/v2/v3 ■ Remote Syslog ■ Rich set of diagnostics with logging and alarms ■ Loopback diagnostic tests ■ Protocol analyzer with raw and interpreted real time line traces Universal Power Supply Options RX1510 and RX1511 ■ Modular ■ Hot-Swappable (RX1510 only) ■ Fully integrated power supplies (no external adaptors) ■ Input voltage range of 9-72VDC, 88-300VDC, and 85-264VAC for worldwide operability ■ CSA/UL 60950 safety approved to +85°C Built-in Power Supply RX1512 ■ Input voltage range of 9-72VDC ■ Fully integrated power supply (no external adaptors) RUGGEDCOM RX1510 / RX1511 / RX1512 3 RUGGEDCOM RX1510 Multiple Ethernet Ports Up to 24 10/100BaseTx, Up to 8 Gigabit ports Up to 24 100BaseFx ports Up to 12 ports 10FL / 100SX SC, ST, LC and MTRJ Pluggable Optics (SFP) Hot Swappable Power Supplies 2-12VDC (9-15VDC) 24VDC (15-36 VDC) 48VDC (36-72 VDC) or HI (88-300VDC / 85-264 VAC) Redundant load sharing power supplies WAN ports Modular Up to 4 T1/E1 ports Cellular (EVDO / HSPA)* DDS (56K Master/Slave, 64K Slave) All modules are field replaceable Enclosure Serial Ports Operating Temperatures IP40 Aluminum Up to 24 RS232/422/485 -40°C to +85°C No Fans * Carrier approvals may be required Other Available Models RX1511 RX1512 Singular modular power supply 2 line modules Built-in 9-72VDC power supply 2 Line modules EMI Immunity Mounting Options Meets IEEE 1613 (electric utility substations) Exceeds IEC 61850-3 (electric utility substations) Exceeds IEC 61800-3 (variable speed drive systems) Exceeds IEC 61000-6-2 (generic industrial environment) Exceeds NEMA TS-2 (traffic control equipment) Panel/DIN rail 4 RUGGEDCOM RX1510 / RX1511 / RX1512 Utility Grade Layer 2/3 Switch and Router ROX II Features ROX II Software Features ■ Simple plug and play operation – automatic learning, negotiation, and crossover detection ■ Telecom Standard Command Line Interface (CLI) ■ Single File Configuration ensures easy installation and configuration control ■ Automatic rollback in the event of configuration errors (configurable) ■ NETCONF configuration interface supports powerful remote configuration and status features. Enhanced Rapid Spanning Tree Protocol (eRSTP) RUGGEDCOM eRSTP allows the creation of fault-tolerant ring and mesh Ethernet networks that incorporate redundant links that are ‘pruned’ to prevent loops. eRSTP yields worst-case fault recovery1 of 5ms times the ‘bridge diameter’ and allows rings of up to 160 switches. For example, a ring of ten switches will have fault recovery times under 50ms. eRSTP implements both STP and RSTP to ensure interoperability with commercial switches unlike other proprietary ‘ring’ solutions. eRSTP also provides fast and deterministic behavior for root bridge failure. ■ VLAN (802.1Q) Quality of Service (IEEE 802.1p) ■ Port rate and broadcast storm limiting Some networking applications such as real-time control or VoIP (voice over IP) require predictable arrival times for Ethernet frames. Switches can introduce latency in times of heavy network traffic due to the internal queues that buffer frames and then transmit on a first come first serve basis. ROX II supports ‘Class of Service’ that allows time critical traffic to jump ahead to the front of the queue thus minimizing latency and reducing jitter to allow such demanding applications to operate correctly. ROX II allows priority classification by port, tags, MAC address, and IP type of service (ToS). A configurable “weighted fair queuing” algorithm controls how frames are emptied from the queues. ■ Port configuration, status, statistics, mirroring ■ SNTP time synchronization (client and server) ■ MSTP 802.1Q-2005 (formerly 802.1s) ■ RSTP (802.1w) and Enhanced Rapid Spanning Tree (eRSTP) network fault recovery (<5ms) ■ Quality of Service (802.1p) for real-time traffic ■ Traffic control ■ SNMP v1, v2c and v3 support including RMON ■ Zone based stateful firewall ■ RIP v1/2 ■ OSPF ■ BGP ■ IS-IS Cyber Security Cyber security is an urgent issue in many industries where advanced automation and communications networks play a crucial role in mission critical applications and where high reliability is of paramount importance. Key ROX II features that address security issues at the local area network level include: Passwords – Multi-level user passwords secure against unauthorized configuration SSH / SSL – Extends capability of password protection to add encryption of passwords and data as they cross the network Enable / Disable Ports – Capability to disable ports so that traffic can not pass 802.1Q VLAN – Provides the ability to logically segregate traffic between predefined ports on switches SNMPv3 – encrypted authentication and access security HTTPS – For secure access to the web interface Enhanced Firewall – Integrated stateful firewall provides protected network zones VPN/IPSEC – Allows creation of secure encrypted and authenticated tunnels VLAN (IEEE 802.1Q) Virtual Local Area Networks (VLAN) allow the segregation of a physical network into separate logical networks with independent broadcast domains. A measure of security is provided since hosts can only access other hosts on the same VLAN and traffic storms are isolated. ROX II supports 802.1Q tagged Ethernet frames and VLAN trunks. Port based classification allows legacy devices to be assigned to the correct VLAN. GVRP support is also provided to simplify the configuration of the switches on the VLAN. SNMP (Simple Network Management Protocol) SNMP provides a standardized method, for network management stations, to interrogate devices from different vendors. SNMP versions supported by ROX II are v1,v2c, and v3. SNMPv3 in particular provides security features (such as authentication, privacy, and access control) not present in earlier SNMP versions. ROX II also supports numerous standard MIBs (Management Information Base) allowing for easy integration with any network management system (NMS). A feature of SNMP supported by ROX II is the ability to generate “traps” upon system events. RUGGEDCOM NMS, the RUGGEDCOM management solution, can record traps from multiple devices providing a powerful network troubleshooting tool. It also provides a graphical visualization of the network and is fully integrated with all RUGGEDCOM products. 1 eRSTP fault recovery times may be approximated as follows: For 100 Mbps, fault recovery performance is <5ms/hop For 1,000 Mbps, fault recovery performance is <5ms/hop + 20ms Utility Grade Layer 2/3 Switch and Router RUGGEDCOM RX1510 / RX1511 / RX1512 5 ROX II Features NETCONF Configuration Interface HTML Web Browser User Interface The NETCONF configuration interface will allow administrators to set device parameters and receive device updates through the use of XML based commands. This standard, supported by multiple vendors, makes it possible to greatly simplify the task of network management. ROX II provides a simple, intuitive user interface for configuration and monitoring via a standard graphical web browser or via standard telcom UI. All system parameters include detailed on-line help to make setup a breeze. ROX II presents a common look and feel and standardized configuration process allowing easy migration to other RUGGEDCOM managed products. NTP (Network Time Protocol) NTP automatically synchronizes the internal clock of all ROX II devices on the network. This allows for correlation of time stamped events for troubleshooting. Port Rate Limiting ROX II supports configurable rate limiting per port to limit unicast, multicast, and broadcast traffic. This can be essential to managing precious network bandwidth for service providers. It also provides edge security for denial of service (DoS) attacks. Broadcast Storm Filtering Broadcast storms wreak havoc on a network and can cause attached devices to malfunction. This could be disastrous on a network with mission critical equipment. ROX II limits this by filtering broadcast frames with a user-defined threshold. Port Mirroring ROX II can be configured to duplicate all traffic on one port to a designated mirror port. When combined with a network analyzer, this can be a powerful troubleshooting tool. Port Configuration and Status ROX II allows individual ports to be ‘hard’ configured for speed, duplex, auto-negotiation, flow control and more. This allows proper connection with devices that do not negotiate or have unusual settings. Detailed status of ports with alarm and SNMP trap on link problems aid greatly in system troubleshooting. Port Statistics and RMON (Remote Monitoring) ROX II provides continuously updating statistics per port that provide both ingress and egress packet and byte counters as well as detailed error figures. Also provided is full support for the RMON statistics, history, alarms, and event groups. RMON allows for very sophisticated data collection, analysis and detection of traffic patterns. Command Line Interface (CLI) A command line interface used in conjunction with remote shell to automate data retrieval, configuration updates, and firmware upgrades. A powerful Telecom Standard style Command Line Interface (CLI) allows expert users the ability to selectively retrieve or manipulate any parameters the device has to offer. Link Backup Link backup provides an easily configured means of raising a backup link upon the failure of a designated main link. The main and backup links can be Ethernet, Cellular, T1/ E1 or DDS. The feature can back up to multiple remote locations, managing multiple main: backup link relationships. The feature can also back up a permanent high speed WAN link to a permanent low speed WAN link and can be used to migrate the default route from the main to the backup link. OSPF (Open Shortest Path First) OSPF is a routing protocol that determines the best path for routing IP traffic over a TCP/IP network based on link states between nodes and several quality parameters. OSPF is an interior gateway protocol (IGP), which is designed to work within an autonomous system. It is also a link state protocol, meaning that the best route is determined by the type and speed of the inter-router links, not by how many router hops they are away from each other (as in Distance-Vector routing protocols, i.e. Rip and RIP II). BGP (Border Gateway Protocol) BGPv4 is a path vector routing protocol where routing decisions are made based on the policies or rules laid out by the network administrator. It is typically used where networks are multihomed between multiple Internet service providers, or in very large internal networks where internal gateway protocols do not scale sufficiently. Event Logging and Alarms ROX II records all significant events to a non-volatile system log allowing forensic troubleshooting. Events include link failure and recovery, unauthorized access, broadcast storm detection, and self-test diagnostics among others. Alarms provide a snapshot of recent events that have yet to be acknowledged by the network administrator. An external hardware relay is de-energized during the presence of critical alarms allowing an external controller to react if desired. 6 RUGGEDCOM RX1510 / RX1511 / RX1512 Utility Grade Layer 2/3 Switch and Router Software Options Layer 2 Standard Edition Layer 3 Standard Edition Layer 3 Feature VLANS (802.1Q) ü ü ü QoS (802.1p) ü ü ü MSTP (802.1Q-2005) formerly 802.1s ü ü ü RSTP ü ü ü eRSTP ü ü ü SNTP ü ü ü L2TPv2 and L2TPv3 ü ü ü Port rate limiting ü ü ü Broadcast storm filtering ü ü ü Port mirroring ü ü ü SNMP v1/v2/v3 ü ü ü RMON ü ü ü CLI ü ü ü HTML user interface ü Security Options ü ü MPLS ü ü DHCP ü ü VRRPv2 and VRRPv3 ü ü PIM-SM ü ü Firewall ü ü OSPF ü ü BGP ü ü RIP v1/v2 ü ü Traffic prioritization ü ü VPN ü IPSec ü Utility Grade Layer 2/3 Switch and Router RUGGEDCOM RX1510 / RX1511 / RX1512 7 EMI and Environmental Type Tests IEC 61850-3 EMI type tests Test Description IEC 61000-4-2 ESD IEC 61000-4-3 Radiated RFI IEC 61000-4-4 Burst (fast transient) IEC 61000-4-5 Surge IEC 61000-4-6 Induced (conducted) RFI IEC 61000-4-8 Magnetic field IEC 61000-4-29 Severity levels Signal ports D.C. power ports A.C. power ports Signal ports D.C. power ports D.C. power ports Signal ports D.C. power ports A.C. power ports Signal ports D.C. Power ports A.C. Power ports 4 4 Note 1 Note 1 4 4 4 4 3 4 3 3 3 3 Note 1 5 N/A N/A N/A 3 3 3 4 4 3 N/A N/A N/A N/A N/A N/A Enclosure contact Enclosure air Enclosure ports Test levels +/-2kV, +/-4kV, +/- 8kV +/-4kV, +/-8kV, +/-15kV 35 V/m Severity levels N/A N/A N/A Signal ports D.C. power ports A.C. power ports Earth ground ports 3 Signal ports D.C. power ports A.C. power ports Signal ports D.C. power ports A.C. power ports Signal ports D.C. power ports A.C. power ports +/- 4kV @ 2.5kHz +/- 4kV +/- 4kV +/- 4kV 2.5kV common mode@1MHz 2.5kV common, 1kV diff. mode@1MHz 2.5kV common, 1kV diff. mode@1MHz 5kV (Fail-safe relay output) 5kV 5kV 2kVac 2kVac 2kVac N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Enclosure ports 3 D.C. power ports Voltage dips and interrupts IEC 61000-4-11 IEC 61000-4-12 Test levels +/- 8kV +/- 15kV 20 V/m +/- 4kV @ 2.5kHz +/- 4kV +/- 4kV +/- 4kV +/- 2kV line-to-earth, +/- 2kV line-to-earth, +/- 1kV line-to-line +/- 4kV line-to-earth, +/- 2kV line-to-line 10V 10V 10V 10V 40 A/m continuous, 1000 A/m for 1 s 1000 A/m for 1 s 30% for 0.1s, 60% for 0.1s, 100% for 0.05s 30% for 1 period, 60% for 50 periods 100% for 5 periods, 100% for 50 periods 2.5kV common, 1kV diff. mode@1MHz 2.5kV common, 1kV diff. mode@1MHz 2.5kV common, 1kV diff. mode@1MHz 30V Continuous, 300V for 1s 30V Continuous, 300V for 1s 10% 2kVac (Fail-safe relay output) 1.5V DC 2kVac 5kV (Fail-safe relay output) 5kV 5kV Enclosure contact Enclosure air Enclosure ports Signal ports D.C. power ports A.C. power ports Earth ground ports 3 Signal ports D.C. power ports A.C. power ports Signal ports D.C power ports A.C. power ports Earth ground ports Damped oscillatory IEC 61000-4-16 Mains frequency voltage IEC 61000-4-17 Ripple on D.C. power supply IEC 60255-5 Dielectric strength IEC 60255-5 H.V. Impulse A.C. power ports IEEE 1613 (C37.90.x) EMI immunity type tests Test Description IEEE C37.90.3 ESD IEEE C37.90.2 Radiated RFI IEEE C37.90.1 Fast transient IEEE C37.90.1 Oscillatory IEEE C37.90 H.V. impulse IEEE C37.90 Dielectric strength Environmental type tests Test Description Test levels Severity levels IEC 60068-2-1 Cold temperature Test Ad -40°C, 16 hours N/A IEC 60068-2-2 Dry heat Test Bd +85°C, 16 hours N/A IEC 60068-2-30 Humidity (damp heat, cyclic) Test Db Vibration response Test Fc Vibration endurance 95% (non-condensing), 55°C , 6 cycles Level 2 (1G @ 10-150 Hz) N/A Class 2 2 IEC 60255-21-1 IEC 60255-21-2 Shock response Shock withstand Test Ea Level 2 (2G @ 10-150 Hz) RX1510, RX1511: Level 1 (5G @ 11ms) / RX1512: Level 2 (10G @ 11ms) Level 2 (30G @ 11ms) Class 2 2 1 RUGGEDCOM specified severity levels. 2 Class 2 refers to “Measuring relays and protection equipment for which a very high security margin is required or where the vibration levels are very high, (e.g. shipboard application and for severe transportation conditions”). 3 Only applicable to functional earth connections separated from the safety earth connection. 8 RUGGEDCOM RX1510 / RX1511 / RX1512 Utility Grade Layer 2/3 Switch and Router Technical Specifications Power Supply ■ 12VDC (9-15 VDC) ■ 24VDC (15-36VDC) ■ 48VDC (36-72VDC) ■ HI Voltage AC/DC : 88-300VDC or 85-264VAC ■ Power consumption: RX1510 – 65W max RX1511 – 35W max RX1512 – 30W max ■ Built-in 9-72VDC Power Supply (RX1512 only) Critical Alarm Relay ■ Form-C failsafe contact relay: 5A@30VDC, 8A@250VAC Physical Dimensions ■ Height: 4.83” (122.7mm) ■ Width: 9.36” (237.7mm) : RX1510 5.95” (151.1mm) : RX1511 4.40” (111.8mm) : RX1512 ■ Depth: 6.86” (174.2mm) ■ Mounting: Panel/DIN Rail ■ Ingress protection: IP40 (1mm objects) ■ Weight: Dependent upon model and module selection Switch Properties ■ Switching method: Store and forward ■ Switching latency: 7 us ■ Switching bandwidth: 10 Gbps ■ MAC addresses: 8192 ■ MAC address table size: 64kbytes ■ Priority queues: 4 ■ Frame buffer memory: 1 Mbit ■ VLANs: 255 ■ IGMP multicast groups: 256 ■ Port rate limiting ■ No head of line blocking Regulatory Approvals ■ ISO: Designed and manufactured using an ISO9001: 2000 certified quality program ■ CE marking ■ Emissions: FCC Part 15 (Class A), EN55022 (CISPR22 Class A) ■ Safety: cCSAus (Compliant with CSA C22.2 No. 60950, UL 60950, EN60950) ■ Laser eye safety (FDA/CDRH): Complies with 21 CFR Chapter 1, Subchapter J Network Management ■ HTTPS graphical web-based ■ SNMP v1, v2c, v3 ■ Telnet, VT100 ■ Command Line Interface (CLI) ■ SSH IED 61850 Compliance ■ IEC 61850-9-2 Sampled values ■ IEC 61850-8-1 GOOSE messages Warranty ■ 5 Years – Applicable to design and manufacturing related product defects. Utility Grade Layer 2/3 Switch and Router EMI Immunity and Environmental Compliance ■IEC 61000-6-2 Industrial (Generic) ■IEC 61800-3 Industrial (Variable Speed Drive Systems) ■ IEC 61850-3 Electric Utility Substations ■ IEEE 1613 Electric Utility Substations ■ NEMA TS 2 Traffic Control Equipment IEEE Compliance ■ 802.3-10BaseT ■802.3u-100BaseTX, 100BaseFX ■802.3x-Flow Control ■802.3z-1000BaseLX ■802.3ab-1000BaseTX ■Link Aggregation ■802.1d-MAC Bridges ■802.1d-Spanning Tree Protocol ■802.1Q-VLAN Tagging ■802.1w-Rapid Spanning Tree Protocol ■802.1x-Port Based Network Access Control ■802.1Q-2005 (formerly 802.1s) MSTP IETF RFC Compliance ■RFC768-UDP ■RFC783-TFTP ■RFC791-IP ■RFC792-ICMP ■RFC793-TCP ■RFC826-ARP ■RFC854-Telnet ■RFC894-IP over Ethernet ■RFC1112-IGMP v1 ■RFC1519-CIDR ■RFC1541-DHCP (client) ■RFC2030-SNTP ■RFC2068-HTTP ■RFC2236-IGMP v2 ■RFC2284-EAP ■RFC2475-Differentiated Services ■RFC2865-RADIUS ■RFC3414-SNMPv3-USM ■RFC3415-SNMPv3-VACM ■RFC2661-L2TPv2 ■RFC3931-L2TPv3 ■RFC3768-VRRPv2 ■RFC5798-VRRPv3 IETF SNMP MIBS ■ RFC1493-BRIDGE-MIB ■RFC1907-SNMPv2-MIB ■RFC2012-TCP-MIB ■RFC2013-UDP-MIB ■RFC2578-SNMPv2-SMI ■RFC2579-SNMPv2-TC ■RFC2819-RMON-MIB ■RFC2863-IF-MIB ■draft-ietf-bridge-rstpmib-03-BRIDGE-MIB ■draft-ietf-bridge-bridgemib-smiv2-03-RSTP-MIB ■IANAifType-MIB RUGGEDCOM RX1510 / RX1511 / RX1512 9 Chapter 5 RUGGEDCOM RX1510 Dimension Drawings 194.6 RX1510 Dimension Drawings Installation Guide 122.7 237.74 Figure 53: Overall Dimensions Overall dimensions All dimensions are in millimeters, unless otherwise stated. 46 10 RUGGEDCOM RX1510 / RX1511 / RX1512 Utility Grade Layer 2/3 Switch and Router RUGGEDCOM RX1510 Chapter 5 Installation Guide Dimension Drawings RX1510 Dimension Drawings 207.5 96.5 4.1 8.1 152.4 78.2 50.8 276.4 50.8 174.2 286.5 Panel 54: andPanel DIN rail dimensions Figure andmount Din Rail Mount Dimensions All dimensions are in millimeters, unless otherwise stated. Utility Grade Layer 2/3 Switch and Router 47 11 RUGGEDCOM RX1510 / RX1511 / RX1512 NOTE All dimensions are in millimeters, unless otherwise stated. RX1511 Dimension Drawings 199.6 151.1 122.7 Chapter 5 RUGGEDCOM RX1511 Overall dimensions Figure 53: Overall Dimensions Dimension Drawings All dimensions are in millimeters, unless otherwise stated. Installation Guide 207.3 174.2 199.9 189.8 152.4 78.2 45 50.8 96.5 50.8 4.1 8.1 Figure and Din Rail Mount Dimensions Panel 54: andPanel DIN rail mount dimensions All dimensions are in millimeters, unless otherwise stated. 12 RUGGEDCOM RX1510 / RX1511 / RX1512 Utility Grade Layer 2/3 Switch and Router Dimension Drawings NOTE All dimensions are in millimeters, unless otherwise stated. RX1512 Dimension Drawings 122.7 111.8 184.4 Figure 50: Overall Dimensions Chapter 5 RUGGEDCOM RX1512 Overall dimensions Dimension Drawings All dimensions are in millimeters, unless otherwise stated. Installation Guide 150.4 197.1 174.2 160.5 152.4 78.2 41 50.8 96.5 50.8 4.1 8.1 Panel and railand mount dimensions Figure 51:DIN Panel Din Rail Mount Dimensions All dimensions are in millimeters, unless otherwise stated. Utility Grade Layer 2/3 Switch and Router RUGGEDCOM RX1510 / RX1511 / RX1512 13 Order Code RX1510 6GK60150AM2 - ____ - ____ - _____ - ___ - _____- Z -_____ +B ____ +C ____ +D ____ +E ____ PM1 PM2 MNT ST MOD SFT LM1 LM2 LM3 LM4 RX1511 6GK60151BM2 - ____ - _____ - ___ - _____- Z -_____ +B ____ +C ____ PM1 MNT ST MOD SFT LM1 LM2 RX1512 6GK60150BM2 - 8 - _____ - ___ - _____- Z -_____ +B ____ +C ____ PM1 MNT ST MOD SFT LM1 LM2 PM1 and PM2: Power Modules Serial Line Module 0 = No power supply 1 = 24VDC (15-36VDC), screw terminal block 2 = 48VDC (36-72VDC), screw terminal block 3 = 88-300VDC or 85-264VAC, screw terminal block 4 = 24VDC (15-36VDC), pluggable terminal block 5 = 48VDC (36-72VDC), pluggable terminal block 6 = 88-300VDC or 85-264VAC, pluggable terminal block 7 = 12VDC (9-15VDC), screw terminal block 8 = 12VDC (9-15VDC), pluggable terminal block 03 = 6 x RS232/RS422/RS485 RJ45 Serial Line Module MNT: Mounting options A = No Mounting Option E = DIN and Panel Mount Kit ST: Switch Type Hardware B = Layer 2 Switch C = Layer 3 Switch MOD: Manufacturing modifications 0 = None 1 = Conformal coating SFT: Software A00 = Layer 2 Standard Edition A01 = Layer 3 Standard Edition (with L3 HW) A02 = Layer 3 Standard Edition (with L2 HW) A03 = Layer 3 Security Edition (with L3 HW) A04 = Layer 3 Security Edition (with L2 HW) LM1 through LM6 Line Modules Blank Module 00 = Blank Module Copper Ethernet Modules 01 = 6 x 10/100TX RJ45 02 = 2 x 10/100/1000TX RJ45 14 RUGGEDCOM RX1510 / RX1511 / RX1512 100BaseFX modules with 2 Ports 04 = 2 x 100FX - Multimode 1300nm ST connectors 2km 05 = 2 x 100FX - Multimode 1300nm SC connectors 2km 06 = 2 x 100FX - Multimode 1300nm LC connectors 2km 07 = 2 x 100FX - Multimode 1300nm MTRJ connectors 2km 08 = 2 x 100FX - Singlemode 1300nm ST connectors 20km 09 = 2 x 100FX - Singlemode 1300nm SC connectors 20km 10 = 2 x 100FX - Singlemode 1300nm LC connectors 20km 11 = 2 x 100FX - Singlemode 1300nm SC connectors 50km 12 = 2 x 100FX - Singlemode 1300nm LC connectors 50km 13 = 2 x 100FX - Singlemode 1300nm SC connectors 90km 14 = 2 x 100FX - Singlemode 1300nm LC connectors 90km 10BaseFL / 100BaseSX with 3 Ports 15 = 3 x 10FL / 100SX, Multimode, 850nm, ST, 2km 100BaseFX modules with 4 Ports 16 = 4 x 100FX - Multimode 1300nm LC connectors 2km 17 = 4 x 100FX - Multimode 1300nm MTRJ connectors 2km 18 = 4 x 100FX - Singlemode 1300nm LC connectors 20km 19 = 4 x 100FX - Singlemode 1300nm LC connectors 50km 20 = 4 x 100FX - Singlemode 1300nm LC connectors 90km 21 = 4 x 100FX SFP Blank (no optical transceiver) 22 = 4 x 100FX SFP Multimode 1310 nm LC 2km 23 = 4 x 100LX SFP Singlemode 1300 nm LC 20km 24 = 4 x 100LX SFP Singlemode 1300 nm LC 50km 25 = 4 x 100LX SFP Singlemode 1550 nm LC 90km 100BaseFX modules with 6 Ports 26 = 6 x 100FX SFP Blank (no optical transceiver) 27 = 6 x 100FX SFP Multimode 1310nm LC 2km 28 = 6 x 100LX SFP Singlemode 1310nm LC 20km 29 = 6 x 100LX SFP Singlemode 1310nm LC 50km 30 = 6 x 100LX SFP Singlemode 1550 nm LC 90km Utility Grade Layer 2/3 Switch and Router Order Code Gigabit Ethernet Modules modules with 2 Ports Application Processing Engine 5 6 31 = 2 x 1000SX Multimode 850 nm LC 500m 32 = 2 x 1000LX Singlemode 1300 nm SC 10km 33 = 2 x 1000LX Singlemode 1300 nm LC, 10km 34 = 2 x 1000LX Singlemode 1300 nm SC 25km 35 = 1000LX Singlemode 1300 nm LC 25km 36 = 2 x 1000LX SFP Blank (no optical transceiver) 37 = 2 x 1000SX SFP Multimode 850 nm LC 500m 38 = 2 x 1000LX SFP Singlemode 1310 nm LC 10km 39 = 2 x 1000LX SFP Singlemode 1310 nm LC 25km 40 = 2 x 1000LX SFP Singlemode 1550 nm LC 70km 52 = APE, 1.3Ghz, 2GB RAM, 8GB SATA, Video, USB, Linux 53 = APE, 1.3Ghz, 2GB RAM, 8GB SATA, Video, USB, Windows 7 Embedded 54 = APE, 1.3Ghz, 2GB RAM, 16GB SATA, Video, USB, Linux 55 = APE, 1.3Ghz, 2GB RAM, 16GB SATA, Video, USB, Windows 7 Embedded 56 = APE, 1.3GHz, 2GB RAM, 16GB SATA, DVI-D Video, 2xUSB, Checkpoint FW (Requires Checkpoint License) WAN Port Options 1 41 = 1 x T1/E1 RJ48 (Channelized/Unchannelized) 42 = 2 x T1/E1 RJ48 (Channelized/Unchannelized) 43 = 4 x T1/E1 RJ48 (Channelized/Unchannelized) 44 = 1 x E1 75 Ohms BNC (Channelized/Unchannelized) 45 = 2 x E1 75 Ohms BNC (Channelized/Unchannelized) 46 = 1 x GSM/EDGE/HSPA 2 3 47 = 2 x GSM/EDGE/HSPA 2 3 48 = 1 x EVDO rev A Verizon US 2 4 49 = 2 x EVDO rev A Verizon US 2 4 50 = 2 x GSM/EDGE/HSPA and EVDO rev A Verizon US 2 3 4 51 = 1k DDS RJ48 (56k Master/Slave 64k Slave) M12 Copper Ethernet Modules 57 = 2 x 10/100/1000TX 8-pin M12 58 = 4 x 10/100TX 8-pin M12 59 = 4 x 10/100TX 4-pin M12 60 = 2 x 10/100/1000TX 8-pin M12 with controlled Bypass 61 = 4 x 10/100TX 8-pin M12 with controlled Bypass 62 = 4 x 10/100TX 4-pin M12 with controlled Bypass 63 = 2 x 10/100/1000TX 8-pin M12 X-CODED 64 = 2 x 10/100/1000TX 8-pin M12 X-CODED with controlled Bypass 1 Only one T1/E1 module may be used per router. 2 Carrier approvals may be required. 3 HSPA module is rated from -25°C to +75°C. 4 EVDO module is rated from -30°C to +75°C. 5 APE module is rated from -40°C to +70°C. 6 Maximum 2 APEs can be installed in a chassis. Accessories / Options = Fast Ethernet SFPs 6GK6000-8FE51-0AA0 = 100FX SFP Multimode LC 1310nm 2km 6GK6000-8FE52-0AA0 = 100FX SFP Singlemode LC 1310nm 20km 6GK6000-8FE53-0AA0 = 100FX SFP Singlemode LC 1310nm 50km 6GK6000-8FE54-0AA0 = 100FX SFP Singlemode LC 1310nm 90km Gigabit SFPs 6GK6000-8FG51-0AA0 = 1000SX SFP Multimode LC 850nm 500m 6GK6000-8FG52-0AA0 = 1000LX SFP Singlemode LC 1310nm 10km 6GK6000-8FG53-0AA0 = 1000LX SFP Singlemode LC 1310nm 25km 6GK6000-8FG54-0AA0 = 1000LX SFP Singlemode LC 1550nm 70km Utility Grade Layer 2/3 Switch and Router Bidirection SFPs 6GK6000-8FB51-0AA0 = 1000BX SFP Singlemode LC 1310Tx 1490Rx 10km 6GK6000-8FB52-0AA0 = 1000BX SFP Singlemode LC 1490Tx 1310Rx 10km 6GK6000-8FB53-0AA0 = 1000BX SFP Singlemode LC 1310Tx 1490Rx 40km 6GK6000-8FB54-0AA0 = 1000BX SFP Singlemode LC 1490Tx 1310Rx 40km Antennas 6GK6000-8NA00-0AA0 = Dual Band Antenna for use with the W21, W22 or W32 Option 6GK6000-8NB00-0AA0 = 7 Band Antenna for use with the W11, W12 or W32 Option RUGGEDCOM RX1510 / RX1511 / RX1512 15 Example Order Codes RX1510 6GK6015-1AM23-3EC0-Z A01+B06+C22+D00+E00 RX1510 unit with 2 (two) 88-300VDC or 85-264VAC screw terminal block power supplies, DIN and Panel Mount Kit, Layer 3 Switch Type, Layer 3 Standard Edition (with L3 HW) Software, 2x 100FX - Multimode 1300nm LC connectors 2km, 4x 100FX SFP Multimode 1310 nm LC 2km, 2 blank modules RX1511 6GK6015-1BM24-0EC1-Z A01+B06+C22 RX1511 unit with 24VDC (15-36VDC), pluggable terminal block power supply, DIN and Panel Mount Kit, Layer 3 Switch Type, Conformal Coating, Layer 3 Standard Edition (with L3 HW) Software, 2x 100FX - Multimode 1300nm LC connectors 2km, 4x 100FX SFP Multimode 1310 nm LC 2km RX1512 6GK6015-1CM28-0EB1-Z A00+B31+C64 RX1512 unit with DC power supply, DIN and Panel Mount Kit, Layer 2 Switch Type, Conformal Coating, Layer 2 Standard Edition Software, 2x 1000SX Multimode 850 nm LC 500m, 2x 10/100/1000TX 8-pin M12 X-CODED with controlled Bypass 16 RUGGEDCOM RX1510 / RX1511 / RX1512 Utility Grade Layer 2/3 Switch and Router Siemens Industry, Inc. 5300 Triangle Parkway Norcross, GA 30092 1-800-241-4453 [email protected] usa.siemens.com/ruggedcom Subject to change without prior notice. All rights reserved. ©2015 Siemens Industry, Inc. The information provided in this brochure contains descriptions or characteristics of performance which in case of actual use do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. Availability and technical specifications are subject to change without notice. All product designations may be trademarks or product names of Siemens AG or supplier companies whose use by third parties for their own purposes could violate the rights of the owners.