Product Brief Speed PROFET TM – BTF 50060-1TEA Motor Drive High Side Switch Key Features PWM capability of more than 25kHz 6mΩ RON (max. 12mΩ @ 150°C) with No external bootstrap capacitor high inrush current necessary The BTF 50060-1TEA is a single channel 6mΩ (max. 12mΩ @ 150°C) High Side Driver, able to be driven by PWM control signals with high frequencies, such as 25kHz, but also capable of DC operation. 3.3V and 5V compatible logic inputs Advanced analog load current sense signal The device is housed in PG-TO252-5 (DPAK 5 pin) RoHS compliant package. In combination with a freewheeling diode, the BTF50060-1TEA can be set up in a half bridge topology. Overload and overtemperature protection, with defined diagnostic signal Key Benefits The device includes protection functions like short circuit and overtemperature shutdown. Through the IS pin, BTF 50060-1TEA provides an accurate load current measurement in normal operation and a diagnostic feedback, with a defined signal, for such events as open load – both in ON and OFF state, overcurrent and overtemperature. Reduced power dissipation Small package for high current motor drive, less PCB space Reduced component count and easier PCB layout The Speed PROFET TM doesn’t need an external bootstrap capacitor for high frequency switching. Applications Most suitable for driving motors, valves, and coils, e.g. fuel pump Capable of PWM switching frequency of 25kHz and above www.infineon.com/profet Direct connection to the MCU Easy current sense calibration Product Brief Speed PROFET TM – BTF 50060-1TEA Motor Drive High Side Switch Block Diagram Control Chip Power Stage (base chip) ESD + Overvoltage + Reverse Polarity Protection VS Undervoltage Shutdown & Restart Temp input circuit in Diagnosis & Protection Rin Power Stage (gate drive) i iS Sense Output OUT gnD Application Example Load Example: Fuel pump VBAT +5V CVS 470µF RInput µC e.g. XC866 10kΩ RSense 10kΩ RIS 1kΩ VS IN OUT IS GND D1 Load GND How to reach us: http://www.infineon.com Published by Infineon Technologies AG 81726 Munich, Germany © 2010 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this Product Brief shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Published by Infineon Technologies AG Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Order Number: B127-H9454-X-X-7600 NB10-1388