Echomax XRS-5 Catalog Specification Sheet

© Siemens AG 2016
Level Measurement
Continuous level measurement - Ultrasonic transducers
EchoMax XRS-5
■ Overview
■ Technical specifications
Mode of operation
Measuring principle
Ultrasonic transducer
Input
Measuring range
0.3 ... 8 m (1 ... 26 ft), dependent on
application
Output
Frequency
44 kHz
Beam angle
10°
Accuracy
Temperature error
Compensated by integral temperature sensor
Rated operating conditions
Vessel pressure
Normal atmospheric pressure
Ambient conditions
• Ambient temperature
EchoMax XRS-5 ultrasonic transducer provides reliable, continuous level monitoring of liquids and slurries in narrow lift stations/
wet wells, flumes, weirs and filter beds using a beam angle of
just 10° and a CSM rubber face.
■ Benefits
• Narrow beam angle of only 10°
• Chemically resistant PVDF copolymer enclosure and CSM
rubber face
• Measuring range: 8 m (26 ft) for measurement of liquids and
slurries
• Fully submersible: IP68 degree of protection
• Easy installation with 1" NPT or R 1" BSPT connection
■ Application
-20 ... +65 °C (-4 ... +149 ° F)
Design
Weight (approximate shipping weight
of sensor with standard cable length)
1.2 kg (2.6 lb)
Material (enclosure)
PVDF copolymer enclosure and
CSM face
Process connection
1" NPT [(Taper), ANSI/ASME
B1.20.1] or R 1" [(BSPT), EN 10226]
Degree of protection
IP65/IP68
Cable connection
2-core shielded/twisted, 0.5 mm2
(20 AWG), PVC sheath
Cable (max. length)
• 365 m (1 200 ft) with RG 62 A/U
coaxial cable
• 365 m (1 200 ft) with 2-core twisted
pair, foil shield, 0.5 mm2
(20 AWG), PVC sheath, only for
MultiRanger 100/200
Options
The XRS-5 is non-contacting with a measuring range from
0.3 ... 8 m (1 ... 26 ft). Advanced echo processing ensures reliable data even in conditions with obstructions, turbulence, and
foam.
Flange version
Factory flange with PTFE face for
ASME, EN or JIS configuration
Submergence shield
For applications with flooding
possible
The hermetically sealed CSM rubber face and the PVDF copolymer enclosure are designed for maximum resistance to methane, salt water, caustics, and harsh chemicals common to
wastewater installations. With an IP68 degree of protection, this
rugged sensor is fully submersible in the event of flood conditions. Use a submergence shield if full submergence is possible
in the application. A submergence shield will maintain a high
level reading output during submerged conditions.
Certificates and approvals
CE, RCM, KCC
CSA Class I, Div. 2, Groups A, B, C,
D, Class II, Div. 1, Groups E, F, G
FM Class I, Zone 1, AEx m IIC, T6
Class II, III, Div. 1, Groups E, F, G T6
ATEX II 2GD / IECEx / INMETRO Ex
mb IIC T6 Gb, Ex tb IIIC T85 °C Db
The low-cost XRS-5 transducer is compatible with a full range of
Siemens controllers, from a basic system for high/low alarm or
simple pump control, up to advanced control systems with communications, telemetry and SCADA integration capabilities.
• Key Applications: wet wells, flumes, weirs, filter beds
Siemens FI 01 · 2016
4/177
4
© Siemens AG 2016
Level Measurement
Continuous level measurement - Ultrasonic transducers
EchoMax XRS-5
Selection and Ordering data
Article No.
Selection and Ordering data
EchoMax XRS-5 transducer
With a beam angle of 10°, the XRS-5 provides
reliable, continuous level monitoring of liquids and
slurries in narrow lift stations/wet wells, flumes,
weirs and filter beds.
Measuring range: min. 0.3 m (1 ft), max. 8 m (26 ft)
7ML1106-
Further designs
Please add "-Z" to Article No. and specify Order
code(s).
777 7 0 - 0 7
Acrylic coated, stainless steel tag [13 x 45 mm
(0.5 x 1.75 inch)]: Measuring-point number/
identification (max. 16 characters) specify in
plain text
Click on the Article No. for the online configuration in the PIA Life Cycle Portal.
 Y17
Accessories
Article No.
Tag, stainless steel with hole,
12 x 45 mm (0.47 x 1.77 inch),
one text line for fastening on sensors
7ML1930-1BJ
Submergence shield kit
7ML1830-1BH
Easy Aimer 2, aluminum, NPT with ¾" x 1" PVC
coupling
7ML1830-1AQ
Easy Aimer 2, aluminum with M20 adapter and
1" and 1½" BSPT aluminum couplings
7ML1830-1AX
Easy Aimer 304, NPT with 1" stainless steel
coupling
7ML1830-1AU
Easy Aimer 304, with M20 adapter and 1" and
1½" BSPT 304 stainless steel couplings
7ML1830-1GN
FMS-200 universal box bracket, mounting kit
7ML1830-1BK
FMS-210 channel bracket, wall mount
7ML1830-1BL
A
FMS-220 extended channel bracket, wall mount
7ML1830-1BM
B
C
D
FMS-310 channel bracket, floor mount
7ML1830-1BN
FMS-320 extended channel bracket, floor mount
7ML1830-1BP
DN 80, PN 10/16, Type A, flat faced
DN 100, PN 10/16, Type A, flat faced
DN 150, PN 10/16, Type A, flat faced
J
K
L
FMS-350 bridge channel bracket, floor mount
(see Mounting Brackets on page 4/190 for
more information)
7ML1830-1BQ
JIS10K 3B style
JIS10K 4B style
JIS10K 6B style
Note: flange bolting patterns and facings
dimensionally correspond to the applicable
ASME B16.5 or EN 1092-1, or JIS B 2220 standard.
Q
R
S
1" NPT locknut, plastic
7ML1830-1DS
1" BSPT locknut, plastic
7ML1830-1DR
Process connection
1" NPT [(Taper), ANSI/ASME B1.20.1]
R 1" [(BSPT), EN 10226]
4
Order code
 1
 2
Cable length
5 m (16.40 ft)
10 m (32.81 ft)
30 m (98.43 ft)


Facing
Standard (CSM rubber)
PTFE (flange versions)

Approvals
CE, RCM, KCC, CSA Class I, Div. 2,

Groups A, B, C, D, Class II, Div. 1, Groups E, F, G
FM Class I, Zone 1, AEx m IIC, T6 Class II, III,
Div. 1, Groups E, F, G T6 ATEX II 2GD / IECEx /
INMETRO Ex mb IIC T6 Gb, Ex tb IIIC T85 °C Db
Mounting flange (flush mount)
None
A
B
C
A
B
2

3" ASME, 150 lb, flat faced
4" ASME, 150 lb, flat faced
6" ASME, 150 lb, flat faced
Operating Instructions
Article No.
Quick Start Manual, multi-language
A5E32299685
Applications Guidelines, multi-language
Note: The Operating Instructions should be
ordered as a separate line item on the order.
All literature is available to download for free, in a
range of languages, at http://www.siemens.com/
processinstrumentation/documentation
7ML1998-5HV61
This device is shipped with the Siemens Level and
Weighing manual DVD containing the ATEX Quick
Start and Operating Instructions library.
 We can offer shorter delivery times for configurations designated with the
Quick Ship Symbol . For details see page 9/5 in the appendix.
4/178
Siemens FI 01 · 2016
 We can offer shorter delivery times for configurations designated with the
Quick Ship Symbol . For details see page 9/5 in the appendix.
© Siemens AG 2016
Level Measurement
Continuous level measurement - Ultrasonic transducers
EchoMax XRS-5
Order code
Selection and Ordering data
Article No.
Selection and Ordering data
EchoMax XRS-5C transducer
With a beam angle of 10°, the XRS-5 provides
reliable, continuous level monitoring of liquids and
slurries in narrow lift stations/wet wells, flumes,
weirs and filter beds.
Measuring range: min. 0.3 m (1 ft), max. 8 m (26 ft)
7ML1105-
Further designs
Please add "-Z" to Article No. and specify Order
code(s).
777 7 1 - 0 7
Acrylic coated, stainless steel tag [13 x 45 mm
(0.5 x 1.75 inch)]: Measuring-point number/
identification (max. 16 characters) specify in
plain text
Click on the Article No. for the online configuration in the PIA Life Cycle Portal.
Process connection
1" NPT [(Taper), ANSI/ASME B1.20.1]
 1
Cable length
5 m (16.40 ft)
10 m (32.81 ft)
30 m (98.43 ft)


Facing
Standard (CSM rubber)
PTFE (flange versions)

Approvals
CSA Class I Div. 1, Groups A, B, C, D; Class II
Div. 1, Groups E, F, G; Class III
Mounting flange (flush mount)
None

A
B
C
A
B
1

A
B
C
D
3" ASME, 150 lb, flat faced
4" ASME, 150 lb, flat faced
6" ASME, 150 lb, flat faced
Note: flange bolting patterns and facings
dimensionally correspond to the applicable
ASME B16.5 or EN 1092-1, or JIS B 2220 standard.
Operating Instructions
Article No.
Quick Start Manual, multi-language
A5E32299685
Applications Guidelines, multi-language
Note: The Operating Instructions should be
ordered as a separate line item on the order.
All literature is available to download for free, in a
range of languages, at http://www.siemens.com/
processinstrumentation/documentation
7ML1998-5HV61
 Y17
Accessories
Article No.
Submergence shield kit
7ML1830-1BH
Easy Aimer 2, aluminum, NPT with ¾" x 1" PVC
coupling
7ML1830-1AQ
Easy Aimer 304, NPT with 1" stainless steel
coupling
7ML1830-1AU
FMS-200 universal box bracket, mounting kit
7ML1830-1BK
FMS-210 channel bracket, wall mount
7ML1830-1BL
FMS-220 extended channel bracket, wall mount
7ML1830-1BM
FMS-310 channel bracket, floor mount
7ML1830-1BN
FMS-320 extended channel bracket, floor mount
7ML1830-1BP
FMS-350 bridge channel bracket, floor mount
(see Mounting Brackets on page 4/190 for
more information)
7ML1830-1BQ
 We can offer shorter delivery times for configurations designated with the
Quick Ship Symbol . For details see page 9/5 in the appendix.
This device is shipped with the Siemens Level and
Weighing manual DVD containing the ATEX Quick
Start and Operating Instructions library.
 We can offer shorter delivery times for configurations designated with the
Quick Ship Symbol . For details see page 9/5 in the appendix.
Siemens FI 01 · 2016
4/179
4
© Siemens AG 2016
Level Measurement
Continuous level measurement - Ultrasonic transducers
EchoMax XRS-5
■ Dimensional drawings
■ Schematics
Direct connection
Submergence Shield
(optional)
White/shield
Black/hot
Black
White
155 (6.1)
127 (5.0)
25
(0.98)
Standard
Shield
89 (3.5)
Coaxial extension
Flange (optional)
124 (4.9)
4
127 (5.0)
Junction box
Extend cable using RG-62 A/U coax.
3 terminal direct*
ANSI, DIN, or JIS
Mounting:
Suspended Conduit
Bracket
Rigid metal
conduit
Black
White
Flexible
conduit
Steel
channel
Shield
Non-metallic
coupling
Non-metallic
coupling
3 terminal extension*
Black
White
Transducer
Shield
* For SITRANS LUT400, MultiRanger 100/200, HydroRanger 200
Flexible conduit transducer should not be
subjected to wind, vibration or jarring.
Plywood
XRS-5 ultrasonic transducer connections
Submersible
Non-metallic
coupling
Rigid metal
conduit
Non-metallic
coupling
Submergence
shield
Plywood mounting provides
excellent isolation
(must be rigid).
Transducer with submergence shield, used in
applications where flooding is possible.
XRS-5 ultrasonic transducer, dimensions in mm (inch)
4/180
Siemens FI 01 · 2016
Similar pages