© Siemens AG 2016 Level Measurement Point level measurement - Rotation paddle switches SITRANS LPS200 ■ Overview ■ Technical specifications Mode of operation Measuring principle Rotating point level switch Input Measured variable High and low and demand Output Output signal • Alarm output • Pickup delay Microswitch 5 A at 250 V AC, non-inductive Microswitch SPDT contact 4 A at 30 V DC, non-inductive Standard (1 rpm model): approx. 1.3 seconds Optional process applications (5 rpm model): approx. 0.26 seconds 4 Sensitivity SITRANS LPS200 is a rotary paddle switch for point level and material detection in bulk solids. • • • • • • • • • Indoor/outdoor Ambient conditions Proven paddle switch technology for bulk solids High integrity mechanical seal Universal power supply options available Unique friction clutch mechanism prevents damage from falling material Rotatable enclosure for convenient wiring Optional paddles for use with low density materials Small paddle makes for simple installation through existing process connection High temperature model and optional extension kit available Optional fail-safe configuration detects loss of rotation ■ Application The paddle switch technology detects full, empty, or demand conditions on materials such as grain, feed, cement, plastic granulate, and wood chips. The paddle switch can handle bulk densities as low as 15 g/l (2.19 lb/ft3) with the optional rectangular vane or 100 g/l (6.25 lb/ft3) with the standard measuring vane. A low revolution geared motor with slip clutch drives a rotating measuring vane which senses the presence of material at the mounted level of the LPS200. As material comes into contact with the rotating paddle, rotation stops, which changes the microswitch state. When the paddle is no longer covered by material, rotation resumes and the relay reverts to its normal condition. The LPS200 has a rugged design for use in harsh conditions in the solids industry. The sensitivity of the paddle can be adjusted for varying material properties like buildup on the vane. The LPS200 comes in a variety of configurations including compact, extended and cable extension. It is equipped with a standard vane which is effective in most applications, but can be configured with a hinged or rectangular vane for increased sensitivity for light materials. • Key Applications: bulk solids such as grain, feed, cement, plastic granulate, wood chips 4/116 Rated operating conditions Installation conditions • Location ■ Benefits Adjustable via reset force of spring or geometry of measuring vane Siemens FI 01 · Update 05/2016 • Ambient temperature -25 ... +60 °C (-13 ... +140 °F) • Installation category III • Pollution degree 2 Medium conditions Bulk solids • Temperature - Standard - Optional -25 ... +80 °C (-13 ... +176 °F) -25 ... +600 °C (-13 ... +1 112 °F) Higher temperature version is available. Consult a local sales person for details. For more information, please visit http://www.automation.siemens.com/ aspa_app • Pressure (vessel) - Standard - Optional • Minimum material density - Standard measuring vane - Optional measuring vane Max. 0.5 bar g (7.25 psi g) Max. 10 bar g (145 psi g) Can detect down to 100 g/l (6.25 lb/ft3) Can detect down to 15 g/l (0.94 lb/ft3) Design Material • Enclosure • Process connection, measuring shaft and vane Epoxy coated aluminum Stainless steel or aluminum Process connection Thread NPT, BSP, and flange options Degree of protection IP65/Type 4/NEMA 4 Conduit entry 2 x M20 x 1.5 or 2 x ½" NPT Power supply Jumper selectable 115 V AC, ± 15 %, 50 ... 60 Hz, 4 VA or 230 V AC, ± 15 %, 50 Hz, 6 VA, or 48 V AC, or 24 V AC, or 24 V DC, ± 15 %, 2.5 W Universal voltage (DPDT replay) 24 V DC ± 15 % 50 ... 60 Hz, 22 ... 230 V, ± 10 %, max. 10 VA Certificates and approvals • • • • • • CSA/FM General Purpose CE CSA/FM Dust Ignition Proof ATEX II 1/2 D RCM IECex © Siemens AG 2016 Level Measurement Point level measurement - Rotation paddle switches SITRANS LPS200 Selection and Ordering data Article No. Ord. code Selection and Ordering data Article No. Ord. code SITRANS LPS200, compact Rotary paddle switch for level and material detection in bulk solids. Compact design for side or top mounted applications. 7ML5725- SITRANS LPS200, compact Rotary paddle switch for level and material detection in bulk solids. Compact design for side or top mounted applications. 7ML5725- 77 7 77 - 777 0 777 Click on the Article No. for the online configuration in the PIA Life Cycle Portal. Process temperature Up to 80 °C (176 °F) Power supply 230 V AC, 1 rev/min. 230 V AC, 1 rev/min., fail-safe 230 V AC, 5 rev/min. 230 V AC, 5 rev/min., fail-safe 115 V AC, 1 rev/min. 115 V AC, 1 rev/min., fail-safe 1 4 } 5 } 6 } } } Process connection material Aluminum7) } Stainless steel, threads 303 (1.4305), } flanges 321 (1.4541), Tri-clamp 304 (1.4301) 8) Stainless steel 316L (1.4404) 2 3 Up to 150 °C (302 °F) Up to 250 °C (482 °F) Up to 600 °C (1 112 °F)1)2) Up to 80 °C (176 °F) basic version aluminum1)3) Up to 80 °C (176 °F) basic version stainless steel1)4) Process pressure Up to 0.5 bar (7.25 psi) Up to 5 bar (72.5 psi) Up to 10 bar (145 psi) 77 7 77 - 777 0 777 A B C D E F 115 V AC, 5 rev/min. 115 V AC, 5 rev/min., fail-safe 48 V AC, 1 rev/min. 24 V AC, 1 rev/min. J K 24 V DC, 1 rev/min. 24 V DC, 1 rev/min., fail-safe L M G H 24 V DC, 5 rev/min. 24 V DC, 5 rev/min., fail-safe N P Switch selectable 230 V AC/115 V AC/24 V DC multi-voltage, 1 rev/min. Switch selectable 230 V AC/115 V AC/24 V DC multi-voltage, 5 rev/min. 48 V AC, 1 rev/min., fail-safe 48 V AC, 5 rev/min. 48 V AC, 5 rev/min., fail-safe 24 V AC, 1 rev/min., fail-safe 24 V AC, 5 rev/min. 24 V AC, 5 rev/min., fail-safe Universal Voltage, 1 rev/min. Universal Voltage, 1 rev/min., fail-safe Universal Voltage, 5 rev/min. Universal Voltage, 5 rev/min, fail-safe } Q R 1 2 3 Extension length 100 mm (3.94 inch)9) 150 mm (5.91 inch) 200 mm (7.87 inch) } 1 2 3 250 mm (9.84 inch) 300 mm (11.81 inch) 4 5 4 Measuring vane Boot shaped, 35 x 106 mm (1.38 x 4.17 inch)10) } Hinged vane, 98 x 200 mm (3.86 x 7.87 inch)10)11) Boot shaped, 28 x 98 mm (1.10 x 3.86 inch) A B C Rectangular, 50 x 150 mm (1.97 x 5.91 inch)12) Rectangular, 50 x 250 mm (1.97 x 9.84 inch)12) Rectangular, 98 x 150 mm (3.86 x 5.91 inch)11)12) D E F Rectangular, 98 x 250 mm (3.86 x 9.84 inch)11)12) G Rectangular, 50 x 98 mm (1.97 x 3.86 inch)12) H Approvals CSA/FM Dust Ignition Proof, RCM ATEX II 1/2 D, RCM CSA/FM General Purpose, RCM, CE CE, RCM IEC Ex ta/tb IIIC EAC Ex ta/tb IIIC Da/Db Z Z Z Z Z Z Z Z Z Z 1 2 3 } } } } A B C D E F J 1A J 1B J 1C J 1D J1E J1F J 2A J 2B J 2C J 2D Process connection Threaded G 1¼" [(BSPP), EN ISO 228-1] G 1" [(BSPP), EN ISO 228-1] G 1½" [(BSPP), EN ISO 228-1] } A B C 1" NPT [(Taper), ANSI/ASME B1.20.1] 1¼" NPT [(Taper), ANSI/ASME B1.20.1] 1½" NPT [(Taper), ANSI/ASME B1.20.1] } D E F Flanged DN 32 PN 6, EN 1092-15) DN 100 PN 6, EN 1092-15) DN 100 PN 16, EN 1092-1 G H J 2" ASME 150 lb B16.5 3" ASME 150 lb B16.5 4" ASME 150 lb B16.5 2" Tri-clamp (DN 50) ISO 28526) K L M N Siemens FI 01 · Update 05/2016 4/117 © Siemens AG 2016 Level Measurement Point level measurement - Rotation paddle switches SITRANS LPS200 Selection and Ordering data Order code Further Designs Please add "-Z" to Article No. and specify Order code(s). 4 Selection and Ordering data Article No. Available ex stock For details see page 9/5 in the appendix. Heating of enclosure13)14) A35 Signal bulb inserted in M20 cable gland13) A20 Food grade materials (in contact with process), according to 1935/2004/EC, with FDA conform shaft sealing15) K01 Stainless steel tag [100 x 45 mm (3.94 x 1.77 inch)]: Measuring-point number/identification (max. 27 characters); specify in plain text Y14 Operating Instructions Article No. Multi-language A5E34210883 Note: The Operating Instructions should be ordered as a separate line on the order. All literature is available to download for free, in a range of languages, at http://www.siemens.com/ processinstrumentation/documentation This device is shipped with the Siemens Level and Weighing manual DVD containing the ATEX Quick Start and Operating Instructions library. Spare Parts Motor gear /PLC, multi-voltage 7ML1830-1KG Replacement vane, boot shape, 35 x 106 mm (1.38 x 4.17 inch) 7ML1830-1KH Hinged vane, 98 x 200 mm (3.86 x 7.87 inch) 7ML1830-1KJ SITRANS LPS200, compact for up to 80 °C (176 °F), aluminum, with power supply A, process connection C, process pressure 1, process connection material 1, extension length 2, measuring vane A, and approval D 7ML1830-1KG SITRANS LPS200, compact for up to 80 °C (176 °F), aluminum, with power supply E, process connection E, process pressure 1, process connection material 1, extension length 2, measuring vane A, and approval C 7ML57255EE11-2AC0 SITRANS LPS200, compact for up to 80 °C (176 °F), stainless steel, with power supply Q, process connection C, process pressure 1, process connection material 2, extension length 2, measuring vane A, and approval B 7ML57256QC12-2AB0 SITRANS LPS200, compact for up to 80 °C (176 °F), stainless steel, with power supply Q, process connection E, process pressure 1, process connection material 2, extension length 2, measuring vane A, and approval A 7ML57256QE12-2AA0 1) Available with approval options C and D only, up to 0.5 bar 2) Not available with process connections A, B, D, E, and G 3) Only available with the following configurations 7ML5725-5AC11-2AD0 or 7ML5725-5EE11-2AC0 4) Only available with the following configurations 7ML5725-6QC12-2AB0 or 7ML5725-6QE12-2AA0 5) Available with process pressure options 1 and 2 only Rigid extension kit 6) Available with process temperature option 1 only (Includes spring coupling, rigid tube extension, and required pins) 7) Available with process connection options A ... F only, process pressure option 1 and process temperature options 1 and 5 only 8) Available with process connection options C, F, H … N and Measuring vane options A and B 9) Available with measuring vane options A, C, D, E, H only Extension: 500, 400, 300 mm (19.7, 15.8, 11.8 inch) 7ML5711-0AA Extension: 1 000, 900, 800, 700, 600 mm (39.4, 35.4, 31.5, 27.6, 23.6 inch) 7ML5711-1AA Extension: 1 500, 1 400, 1 300, 1 200, 1 100 mm (59.1, 55.1, 51.2, 47.2, 43.3 inch) 7ML5711-2AA Rope extension kit, 2 m (6.56 ft) 7ML1830-1KK 10) Add 16 mm (0.63 inch) to extension length 11) Available with extension lengths 2, 3, 4, 5 12) Available with process connection options H … M only 13) Available with approval option D only 14) Available with power supply options A, C, E, G, J, K, L, N, J1B, J1D, J1E, J2A, J2C only 15) Available up to 250 °C (482 °F). This option does not automatically implement a food conform design. We can offer shorter delivery times for configurations designated with the Quick Ship Symbol . For details see page 9/5 in the appendix. } Available ex stock. For details see page 9/5 in the appendix. 4/118 Siemens FI 01 · Update 05/2016 © Siemens AG 2016 Level Measurement Point level measurement - Rotation paddle switches SITRANS LPS200 Selection and Ordering data Article No. Ord. code Selection and Ordering data Article No. Ord. code SITRANS LPS200, shaft protected Rotary paddle switch for level and material detection in bulk solids; ideal for heavy, sticky, or high impact applications. Designed with added protection tube for enhanced shaft protection and protection against buildup on shaft (sidewall buildup). 7ML5726- SITRANS LPS200, shaft protected Rotary paddle switch for level and material detection in bulk solids; ideal for heavy, sticky, or high impact applications. Designed with added protection tube for enhanced shaft protection and protection against buildup on shaft (sidewall buildup). 7ML5726- 77 7 77 - 7777 777 Click on the Article No. for the online configuration in the PIA Life Cycle Portal. Process temperature Up to 80 °C (176 °F) 1 } 4 5 Power supply 230 V AC, 1 rev/min. A 230 V AC, 1 rev/min., fail-safe 230 V AC, 5 rev/min. B C D E 230 V AC, 5 rev/min., fail-safe 115 V AC, 1 rev/min. 115 V AC, 1 rev/min., fail-safe } 1 2 3 1 2 4 3 Extension length 150 mm (5.91 inch)8) 200 mm (7.87 inch) } 1 2 250 mm (9.84 inch) 300 mm (11.81 inch) 3 4 F Extension material (protection tube) Aluminum9) A Stainless steel 303 (1.4305) Stainless steel 316L (1.4404)10) } B C 115 V AC, 5 rev/min. 115 V AC, 5 rev/min., fail-safe 48 V AC, 1 rev/min. G H J 24 V AC, 1 rev/min. 24 V DC, 1 rev/min. K L M 24 V DC, 1 rev/min., fail-safe } Process connection material Aluminum6) Stainless steel, threads 303 (1.4305), flanges 321 (1.4541), Tri-clamp 304 (1.4301)18) Stainless steel 316L (1.4404)7) 2 3 Up to 150 °C (302 °F) Up to 250 °C (482 °F) Up to 600 °C (1 112 °F)1)2) Up to 80 °C (176 °F) basic version3) Process pressure Up to 0.5 bar (7.25 psi) Up to 5 bar (72.5 psi) Up to 10 bar (145 psi) 77 7 77 - 7777 777 24 V DC, 5 rev/min. 24 V DC, 5 rev/min., fail-safe N P Switch selectable 230 V AC/115 V AC/ 24 V DC multi-voltage, 1 rev/min. Switch selectable 230 V AC/115 V AC/ 24 V DC multi-voltage, 5 rev/min. 48 V AC, 1 rev/min., fail-safe } Q R Z J 1A 48 V AC, 5 rev/min. 48 V AC, 5 rev/min., fail-safe Z Z J 1B J 1C 24 V AC, 1 rev/min., fail-safe 24 V AC, 5 rev/min. Z Z J 1D J1E 24 V AC, 5 rev/min., fail-safe Universal Voltage, 1 rev/min. Z Z J1F J 2A Universal Voltage, 1 rev/min., fail-safe Universal Voltage, 5 rev/min. Z Z J 2B J 2C Universal Voltage, 5 rev/min., fail-safe Z J 2D Process connection Threaded G 1¼" [(BSPP), EN ISO 228-1] A G 1½" [(BSPP), EN ISO 228-1] 1¼" NPT [(Taper), ANSI/ASME B1.20.1] } } B C 1½" NPT [(Taper), ANSI/ASME B1.20.1] D Measuring vane Boot shaped, 35 x 106 mm (1.38 x 4.17 inch)11) Hinged vane, 98 x 200 mm (3.86 x 7.87 inch)11)12) Rectangular, 50 x 150 mm (1.97 x 5.91 inch)13) Rectangular, 50 x 250 mm (1.97 x 9.84 inch)13) Rectangular, 98 x 150 mm (3.86 x 5.91 inch)12)13) Rectangular, 98 x 250 mm (3.86 x 9.84 inch)12)13) Rectangular, 50 x 98 mm (1.97 x 3.86 inch)13) Approvals CSA/FM Dust Ignition Proof, RCM ATEX II 1/2 D, RCM CSA/FM General Purpose, RCM, CE CE, RCM IEC Ex ta/tb IIIC EAC Ex ta/tb IIIC Da/Db } A B D E F G H } } 1 2 3 4 5 6 Flanged DN 32 PN 6, EN 1092-14) DN 100 PN 6, EN 1092-14) E F DN 100 PN 16, EN 1092-1 G 2" ASME 150 lb B16.5 3" ASME 150 lb B16.5 4" ASME 150 lb B16.5 H J K 2" Tri-clamp (DN 50) ISO 28525) L Siemens FI 01 · Update 05/2016 4/119 © Siemens AG 2016 Level Measurement Point level measurement - Rotation paddle switches SITRANS LPS200 Selection and Ordering data Order code Further Designs Please add "-Z" to Article No. and specify Order code(s). 4 Heating of enclosure14)15) A35 Signal bulb inserted in M20 cable gland14) A20 Food grade materials (in contact with process), according to 1935/2004/EC, with FDA conform shaft sealing16) K01 Stainless steel tag [100 x 45 mm (3.94 x 1.77 inch)]: Measuring-point number/identification (max. 27 characters); specify in plain text Y14 Operating Instructions Article No. Multi-language A5E34210883 Note: The Operating Instructions should be ordered as a separate line on the order. All literature is available to download for free, in a range of languages, at http://www.siemens.com/ processinstrumentation/documentation This device is shipped with the Siemens Level and Weighing manual DVD containing the ATEX Quick Start and Operating Instructions library. Spare Parts Motor gear /PLC, multi-voltage 7ML1830-1KG Replacement vane, boot shape, 35 x 106 mm (1.38 x 4.17 inch) 7ML1830-1KH Hinged vane, 98 x 200 mm (3.86 x 7.87 inch) 7ML1830-1KJ Available ex stock For details see page 9/5 in the appendix. SITRANS LPS200, extended for up to 80 °C (176 °F), power supply Q, process connection B, process pressure 1, process connection material 2, extension length 2, extension material B, measuring vane A, and approval 2 7ML57265QB12-2BA2 SITRANS LPS200, extended for up to 80 °C (176 °F), power supply Q, process connection C, process pressure 1, process connection material 2, extension length 2, extension material B, measuring vane A, and approval 1 7ML57265QC12-2BA1 1) Available with approval options 3 and 4 only and up to max 0.5 bar 2) Not available with process connection options A, C, E 3) Only available with the following configurations 7ML5726-5QB12-2BA2 or 7ML5726-5QC12-2BA1 4) Available with process pressure options 1 and 2 only 5) Available with process temperature option 1 only 6) Available with process connection options A ... E only, available with process pressure option 1 only, and process temperature option 1 only 7) Extension and vane will also change to 316L, only for process connection options B, D, F … L and vane A 8) Available with measuring vane options A, D, E, H only 9) Available with process pressure option 1 and process temperature option 1 only 10) Available with process connection options B, D, F … L and vane A 11) Add 16 mm (0.63 inch) to extension length 12) Available with extension length options 2 … 4 only 13) Available with process connection options F, G, H, J, K only 14) Available with approval option 4 only 15) Available with power supply options A,C, E, G, J, K, L, N, J1B, J1D, J1E, J2A, J2C only 16) Available up to 250 °C (482 °F). This option does not automatically implement a food conform design 18)Available with Extension material Stainless steel, threads 303 option B only We can offer shorter delivery times for configurations designated with the Quick Ship Symbol . For details see page 9/5 in the appendix. } Available ex stock. For details see page 9/5 in the appendix. 4/120 Siemens FI 01 · Update 05/2016 © Siemens AG 2016 Level Measurement Point level measurement - Rotation paddle switches SITRANS LPS200 Selection and Ordering data Article No. Ord. code Selection and Ordering data Article No. Ord. code SITRANS LPS200, cable extension Rotary paddle switch for level and material detection in bulk solids. Cable extension for increased length in top-mounted applications 7ML5727- SITRANS LPS200, cable extension Rotary paddle switch for level and material detection in bulk solids. Cable extension for increased length in top-mounted applications 7ML5727- 77777 - 777 0 777 Click on the Article No. for the online configuration in the PIA Life Cycle Portal. Process temperature Up to 80 °C (176 °F) 1 Up to 150 °C (302 °F) Up to 250 °C (482 °F) 2 3 Up to 600 °C (1 112 °F)1)2) Up to 80 °C (176 °F) basic version3) 4 5 Process pressure Up to 0.5 bar (7.25 psi) Up to 5 bar (72.5 psi) Up to 10 bar (145 psi) A 230 V AC, 1 rev/min., fail-safe 230 V AC, 5 rev/min. B C D E 230 V AC, 5 rev/min., fail-safe 115 V AC, 1 rev/min. 115 V AC, 5 rev/min. 115 V AC, 5 rev/min., fail-safe 48 V AC, 1 rev/min. 24 V AC, 1 rev/min. 24 V DC, 1 rev/min. Cable extension length Standard cable length, 2 000 mm (78.74 inch) Add Order code Y01 and plain text: "Insertion length ... mm" 500 ... 1 000 mm (19.69 ... 39.37 inch) Cable length 1 001 ... 2 000 mm (39.41 ... 78.74 inch) Cable length 2 001 ... 3 000 mm (78.78 ... 118.11 inch) Cable length 3 001 ... 4 000 mm (118.15 ... 157.48 inch) Cable length 4 001 ... 5 000 mm (157.52 ... 196.85 inch) Cable length 5 001 ... 6 000 mm (196.89 ... 236.22 inch) Cable length 6 001 ... 7 000 mm (236.26 ... 275.59 inch) Cable length 7 001 ... 10 000 mm (275.63 ... 393.70 inch) Without extension12) F 115 V AC, 1 rev/min., fail-safe G H J K L M 24 V DC, 1 rev/min., fail-safe Process connection material Aluminum5) Stainless steel, threads 303 (1.4305), flanges 321 (1.4541) Power supply 230 V AC, 1 rev/min. 24 V DC, 5 rev/min. 24 V DC, 5 rev/min., fail-safe N P Switch selectable 230 V AC/115 V AC/ 24 V DC multi-voltage, 1 rev/min. Switch selectable 230 V AC/115 V AC/ 24 V DC multi-voltage, 5 rev/min. 48 V AC, 1 rev/min., fail-safe Q R Z J 1A 48 V AC, 5 rev/min. 48 V AC, 5 rev/min., fail-safe Z Z J 1B J 1C 24 V AC, 1 rev/min., fail-safe 24 V AC, 5 rev/min. Z Z J 1D J1E 24 V AC, 5 rev/min., fail-safe Universal Voltage, 1 rev/min. Z Z J1F J 2A Universal Voltage, 1 rev/min., fail-safe Universal Voltage, 5 rev/min. Z Z J 2B J 2C Universal Voltage, 5 rev/min., fail-safe Z J 2D Process connection Threaded G 1¼" [(BSPP), EN ISO 228-1] A G 1½" [(BSPP), EN ISO 228-1] 1¼" NPT [(Taper), ANSI/ASME B1.20.1] B C 1½" NPT [(Taper), ANSI/ASME B1.20.1] D 77777 - 777 0 Measuring vane Boot shaped, 35 x 106 mm (1.38 x 4.17 inch)6) Hinged vane, 98 x 200 mm (3.86 x 7.87 inch)6) Boot shaped, 28 x 98 mm (1.10 x 3.86 inch)7) Rectangular, 50 x 150 mm (1.97 x 5.91 inch)7) Rectangular, 50 x 250 mm (1.97 x 9.84 inch)7) Rectangular, 98 x 150 mm (3.86 x 5.91 inch)7) Rectangular, 50 x 98 mm (1.97 x 3.86 inch)7) Approvals CSA/FM Dust Ignition Proof, RCM ATEX II 1/2 D, RCM CSA/FM General Purpose, RCM, CE CE, RCM IEC Ex ta/tb IIIC EAC Ex ta/tb IIIC Da/Db 777 1 2 3 1 2 0 4 1 2 3 4 5 6 7 8 9 N1A A B C D E F G A B C D E F Flanged DN 32 PN 6, EN 1092-14) DN 100 PN 6, EN 1092-14) E F DN 100 PN 16, EN 1092-1 G 2" ASME 150 lb B16.5 3" ASME 150 lb B16.5 4" ASME 150 lb B16.5 H J K Siemens FI 01 · Update 05/2016 4/121 © Siemens AG 2016 Level Measurement Point level measurement - Rotation paddle switches SITRANS LPS200 Selection and Ordering data Order code Further Designs Please add "-Z" to Article No. and specify Order code(s). 4 Total insertion length: Enter the total insertion length in plain text description, max. 10 000 mm (393.70 inch) Y01 Stainless steel tag [100 x 45 mm (3.94 x 1.77 inch)]: Measuring-point number/identification (max. 27 characters); specify in plain text Y14 Reinforced cable (max. 28 kN pulling force)8) P01 Heating of enclosure9)10) A35 Signal bulb inserted in M20 cable gland9) A20 Food grade materials (in contact with process), according to 1935/2004/EC, with FDA conform shaft sealing11) K01 Operating Instructions Article No. Multi-language A5E34210883 Note: The Operating Instructions should be ordered as a separate line on the order. All literature is available to download for free, in a range of languages, at http://www.siemens.com/ processinstrumentation/documentation This device is shipped with the Siemens Level and Weighing manual DVD containing the ATEX Quick Start and Operating Instructions library. Spare Parts Motor gear /PLC, multi-voltage 7ML1830-1KG Replacement vane, boot shape, 35 x 106 mm (1.38 x 4.17 inch) 7ML1830-1KH Hinged vane, 98 x 200 mm (3.86 x 7.87 inch) 7ML1830-1KJ Available ex stock For details see page 9/5 in the appendix. SITRANS LPS200, cable extension for up to 80 °C (176 °F), power supply Q, process connection B, process pressure 1, process connection material 2, extension length 0, measuring vane A, and approval B 7ML57275QB12-0AB0 SITRANS LPS200, cable extension for up to 80 °C (176 °F), power supply Q, process connection C, process pressure 1, process connection material 2, extension length 0, measuring vane A, and approval A 7ML57275QC12-0AA0 1) Available with approval options C and D up to max. 0.5 bar 2) Not available with process connections A, C, E 3) Only available with the following configurations 7ML5727-5QC12-0AA0 or 7ML5727-5QB12-0AB0 4) Available with process pressure options 1 and 2 only 5) Available with process connections A ... E only, process pressure option 1 only and process temperature options 1 and 5 only 6) Add 16 mm (0.63 inch) to extension length 7) Available with process connections F … K only 8) Available only for process temperature up to 80 °C (176 °F) and process connection material 2 9) Available with approval option D 10) Available with power supply options A, C, E, G, J, K, L, N, J1B, J1D, J1E, J2A, J2C only 11) Available up to 250 °C (482 °F). This option does not automatically implement a food conform design (food conform gaps and radius) 12) Not available with P01 and available with Approval D, mounting kit for rope extension included We can offer shorter delivery times for configurations designated with the Quick Ship Symbol . For details see page 9/5 in the appendix. 4/122 Siemens FI 01 · Update 05/2016 © Siemens AG 2016 Level Measurement Point level measurement - Rotation paddle switches SITRANS LPS200 Selection and Ordering data Article No. Ord. code Selection and Ordering data Article No. Ord. code SITRANS LPS200, angled extension Rotary paddle switch with robust design for level and material detection in bulk solids; ideal for heavy or sticky applications. Angled extension is designed to avoid falling material and rotates horizontally in side mount applications to continue working even with heavy buildup. 7ML5728- SITRANS LPS200, angled extension Rotary paddle switch with robust design for level and material detection in bulk solids; ideal for heavy or sticky applications. Angled extension is designed to avoid falling material and rotates horizontally in side mount applications to continue working even with heavy buildup. 7ML5728- 7 7 7 77 - 77 7 0 777 Click on the Article No. for the online configuration in the PIA Life Cycle Portal. Process temperature Up to 80 °C (176 °F) Up to 150 °C (302 °F) Up to 250 °C (482 °F) 7 7 7 77 - 77 7 0 777 Measuring vane Rectangular vane, 50 x 98 mm (1.97 x 3.86 inch) Rectangular vane, 50 x 150 mm (1.97 x 5.91 inch) Rectangular vane, 50 x 250 mm (1.97 x 9.84 inch) 1 2 3 A B C Power supply 230 V AC, 1 rev/min. 230 V AC, 1 rev/min., fail-safe 230 V AC, 5 rev/min. A B C Rectangular vane, 98 x 150 mm (3.86 x 5.91 inch) Rectangular vane, 98 x 250 mm (3.86 x 9.84 inch) D 230 V AC, 5 rev/min., fail-safe 115 V AC, 1 rev/min. 115 V AC, 1 rev/min., fail-safe D E F Hinged vane, 98 x 200 mm (3.86 x 7.87 inch) F 115 V AC, 5 rev/min. 115 V AC, 5 rev/min., fail-safe 48 V AC, 1 rev/min. 24 V AC, 1 rev/min. 24 V DC, 1 rev/min. 24 V DC, 1 rev/min., fail-safe G H J K L M Approvals CSA/FM Dust Ignition Proof, RCM ATEX II 1/2 D, RCM CSA/FM General Purpose, RCM, CE CE, RCM IEC Ex ta/tb IIIC EAC Ex ta/tb IIIC Da/Db 24 V DC, 5 rev/min. 24 V DC, 5 rev/min., fail-safe Switch selectable 230 V AC/115 V AC/24 V DC multi-voltage, 1 rev/min. N P Q Selection and Ordering data Switch selectable 230 V AC/115 V AC/24 V DC multi-voltage, 5 rev/min. 48 V AC, 1 rev/min., fail-safe R Z J 1A 48 V AC, 5 rev/min. Z J 1B 48 V AC, 5 rev/min., fail-safe 24 V AC, 1 rev/min., fail-safe Z Z J 1C J 1D 24 V AC, 5 rev/min. Z J1E 24 V AC, 5 rev/min., fail-safe Universal Voltage, 1 rev/min. Z Z J1F J 2A Universal Voltage, 1 rev/min., fail-safe Z J 2B Universal Voltage, 5 rev/min. Universal Voltage, 5 rev/min., fail-safe Z Z J 2C J 2D Process connection Flanged DN 100 PN 6, EN 1092-11) DN 100 PN 16, EN 1092-1 4" ASME 150 lb B16.5 Process pressure Up to 0.5 bar (7.25 psi) Up to 5 bar (72.5 psi) Up to 10 bar (145 psi) Process connection material Stainless steel 303/321 (1.4305/1.4541) 4 E A B C D E F Order code Further Designs Please add "-Z" to Article No. and specify Order code(s). Heating of enclosure2)3) A35 Signal bulb inserted in M20 cable gland2) A20 Food grade materials (in contact with process), according to 1935/2004/EC, with FDA conform shaft sealing4) K01 Stainless steel tag [100 x 45 mm (3.94 x 1.77 inch)]: Measuring-point number/ identification (max. 27 characters); specify in plain text Y14 Operating Instructions Article No. Multi-language A5E34210883 Note: The Operating Instructions should be ordered as a separate line on the order. All literature is available to download for free, in a range of languages, at http://www.siemens.com/ processinstrumentation/documentation This device is shipped with the Siemens Level and Weighing manual DVD containing the ATEX Quick Start and Operating Instructions library. A B C 1 2 3 Spare Parts 1 Extension length 125 mm (4.92 inch) 150 mm (5.91 inch) 200 mm (7.87 inch) 1 2 3 250 mm (9.84 inch) 300 mm (11.81 inch) 4 5 Motor gear /PLC, multi-voltage 7ML1830-1KG Replacement vane, boot shape, 35 x 106 mm (1.38 x 4.17 inch) 7ML1830-1KH Hinged vane, 98 x 200 mm (3.86 x 7.87 inch) 7ML1830-1KJ 1) Available with process pressure options 1 and 2 only 2) Available with approval option D only 3) Available with power supply options A ,C, E, G, J, K, L, N, J1B, J1D, J1E, J2A, J2C only 4) This option does not automatically implement a food conform design Siemens FI 01 · Update 05/2016 4/123 © Siemens AG 2016 Level Measurement Point level measurement - Rotation paddle switches SITRANS LPS200 Selection and Ordering data Article No. SITRANS LPS200, rigid extension Rotary paddle switch for top mount point level and material detection in bulk solids 7ML5730- Ord. code 77777 - 7777 777 Click on the Article No. for the online configuration in the PIA Life Cycle Portal. Process temperature Up to 80 °C (176 °F) Up to 150 °C (302 °F) Power supply 230 V AC, 1 rev/min. 230 V AC, 1 rev/min., fail-safe 230 V AC, 5 rev/min. 4 230 V AC, 5 rev/min., fail-safe 115 V AC, 1 rev/min. 115 V AC, 1 rev/min., fail-safe 115 V AC, 5 rev/min. 115 V AC, 5 rev/min., fail-safe 48 V AC, 1 rev/min. 24 V AC, 1 rev/min. 24 V DC, 1 rev/min. 24 V DC, 1 rev/min., fail-safe 7ML5730- A B C Extension material (protection tube) Aluminum7)8) Stainless steel 303 (1.4305)9) Stainless steel 316L (1.4404)10)11) D E F G H J K L M 24 V DC, 5 rev/min. 24 V DC, 5 rev/min., fail-safe N P Switch selectable 230 V AC/115 V AC/24 V DC multi-voltage, 1 rev/min. Switch selectable 230 V AC/115 V AC/24 V DC multi-voltage, 5 rev/min. 48 V AC, 1 rev/min., fail-safe Q R Ord. code 77777 - 7777 777 Process connection material Aluminum5) Stainless steel, threads 303 (1.4305), flanges 321 (1.4541), Tri-clamp 304 (1.4301) 6) Stainless steel 316L (1.4404) 3 4 Article No. SITRANS LPS200, rigid extension Rotary paddle switch for top mount point level and material detection in bulk solids Process pressure Up to 0.5 bar (7.25 psi) Up to 5 bar (72.5 psi) Up to 10 bar (145 psi) 1 2 Up to 250 °C (482 °F) Up to 600 °C (1 112 °F)1)2) Selection and Ordering data 1 2 3 1 2 3 0 1 2 Extension length Aluminum 250 ... 500 mm (9.84 ... 19.69 inch) 501 ... 750 mm (19.72 ... 29.53 inch) 751 ... 1 000 mm (29.57 ... 39.37 inch) A B C 1 001 ... 1 250 mm (39.41 ... 42.21 inch) 1 251 ... 1 500 mm (49.25 ... 59.06 inch) 1 501 ... 1 750 mm (59.09 ... 68.90 inch) D E F 1 751 ... 2 000 mm (68.94 ... 78.74 inch) 2 001 ... 2 250 mm (78.78 ... 88.58 inch) 2 251 ... 2 500 mm (88.62 ... 98.43 inch) G H J K L M Z J1A 2 501 ... 2 750 mm (98.46 ... 108.27 inch) 2 751 ... 3 000 mm (108.31 ... 118.11 inch) 3 001 ... 3 250 mm (118.15 ... 127.95 inch) 48 V AC, 5 rev/min. 48 V AC, 5 rev/min., fail-safe 24 V AC, 1 rev/min., fail-safe Z Z Z J1B J1C J1D 3 251 ... 3 500 mm (127.99 ... 137.80 inch) 3 501 ... 3 750 mm (137.83 ... 147.64 inch) 3 751 ... 4 000 mm (147.67 ... 157.48 inch) N P Q 24 V AC, 5 rev/min. 24 V AC, 5 rev/min., fail-safe Universal Voltage, 1 rev/min. Z Z Z J1E J1F J2A Universal Voltage, 1 rev/min., fail-safe Universal Voltage, 5 rev/min. Universal Voltage, 5 rev/min., fail-safe Z Z Z J2B J2C J2D Stainless steel 303 (1.4305) 250 ... 500 mm (9.84 ... 19.69 inch) 501 ... 750 mm (19.72 ... 29.53 inch) 751 ... 1 000 mm (29.57 ... 39.37 inch) R S T 1 001 ... 1 500 mm (39.41 ... 59.05 inch) 1 501 ... 2 000 mm (59.09 ... 78.74 inch) 2 001 ... 2 500 mm (78.78 ... 98.42 inch) U V W 2 501 ... 3 000 mm (98.46 ... 118.11 inch) 3 001 ... 4 000 mm (118.15 ... 157.48 inch) X Y Stainless steel 316L (1.4404) 250 ... 500 mm (9.84 ... 19.69 inch) 501 ... 750 mm (19.72 ... 29.53 inch) 751 ... 1 000 mm (29.57 ... 39.37 inch) Z Z Z P1A P1B P1C Process connection Threaded G 1¼" [(BSPP), EN ISO 228-1] G 1½" [(BSPP), EN ISO 228-1] 1¼" NPT [(Taper), ANSI/ASME B1.20.1] 1½" NPT [(Taper), ANSI/ASME B1.20.1] A B C D Flanged DN 32 PN 6, EN 1092-13) DN 100 PN 6, EN 1092-13) DN 100 PN 16, EN 1092-1 E F G 1 001 ... 1 500 mm (39.41 ... 59.05 inch) 1 501 ... 2 000 mm (59.09 ... 78.74 inch) 2 001 ... 2 500 mm (78.78 ... 98.42 inch) Z Z Z P1D P1E P1F 2" ASME 150 lb B16.5 3" ASME 150 lb B16.5 4" ASME 150 lb B16.5 2" Tri-clamp 2’ (DN 50) ISO 28524) H J K L 2 501 ... 3 000 mm (98.46 ... 118.11 inch) 3 001 ... 4 000 mm (118.5 ... 157.48 inch) Z Z P1G P1H 4/124 Siemens FI 01 · Update 05/2016 © Siemens AG 2016 Level Measurement Point level measurement - Rotation paddle switches SITRANS LPS200 Selection and Ordering data Article No. SITRANS LPS200, rigid extension Rotary paddle switch for top mount point level and material detection in bulk solids 7ML5730- Measuring vane Boot shaped, 35 x 106 mm (1.34 x 4.17 inch)12) Hinged vane, 98 x 200 mm (3.86 x 7.87 inch)12) Rectangular, 50 x 150 mm (1.97 x 5.91 inch)13) Rectangular, 50 x 250 mm (1.97 x 9.84 inch)13) Rectangular, 98 x 150 mm (3.86 x 5.91 inch)13) Rectangular, 98 x 250 mm (3.86 x 9.84 inch)13) Rectangular, 50 x 98 mm (1.97 x 3.86 inch)13) Approvals CSA/FM Dust Ignition Proof, RCM ATEX II 1/2 D, RCM CSA/FM General Purpose, RCM, CE CE, RCM IEC Ex ta/tb IIIC EAC Ex ta/tb IIIC Da/Db Ord. code 77777 - 7777 777 Y01 Stainless steel tag [100 x 45 mm (3.94 x 1.77 inch)]: Measuring-point number/identification (max. 27 characters); specify in plain text Y14 C D Heating of enclosure14)15) A35 E Signal bulb inserted in M20 cable gland14) A20 Food grade materials (in contact with process), according to 1935/2004/EC, with FDA conform shaft sealing16)17) K01 A B F G Order code Further Designs Please add "-Z" to Article No. and specify Order code(s). Total insertion length: Enter the total insertion length in plain text description, max. 4 000 mm (157.48 inch) Selection and Ordering data Seal at tube end for ingress protection and shaft stability 1 2 3 4 5 6 We can offer shorter delivery times for configurations designated with the Quick Ship Symbol . For details see page 9/5 in the appendix Max. temperature 80 °C (176 °F) P06 Max. temperature 150 °C (302 °F) P07 Max. temperature 250 °C (482 °F) P08 Max. temperature 600 °C (1 112 °F) P09 4 Sliding sleeve (standard, max. pressure 0.5 bar)14)18) P12 Sliding sleeve (pressure tight, for over-pressure application starting from 1 bar max., dependent on pressure option ordered)19) P13 Operating Instructions Article No. Multi-language A5E34210883 Note: The Operating Instructions should be ordered as a separate line on the order. All literature is available to download for free, in a range of languages, at http://www.siemens.com/ processinstrumentation/documentation This device is shipped with the Siemens Level and Weighing manual DVD containing the ATEX Quick Start and Operating Instructions library. Spare Parts Motor gear/PLC, multi-voltage 7ML1830-1KG Replacement vane, boot shape, 35 x 106 mm (1.38 x 4.17 inch) 7ML1830-1KH Hinged vane, 98 x 200 mm (3.86 x 7.87 inch) 7ML1830-1KJ 1) Available with approval options 3 and 4, up to max 0.5 bar 2) Not available with process connections A, C, E 3) Available with process pressure options 1 and 2 only 4) Available with process temperature 1 only 5) Available with process connections A ... E only, with process pressure option 1 and process temperature option 1 only 6) Available with process connection options B, D, F … L and measuring vane option A 7) Available with process pressure 1 and process temperature 1 only 8) Available with extension length options A … Q only 9) Available with extension length options R … Y only 10) Available with process connection options B, D, F … L and measuring vane A, process connection material 3. Available only with extension length options P1A … P1H only 11) Only available with seal at tube end options P06 … P09 12) Add 16 mm (0.63 inch) to extension length 13) Available with process connections F, G, H, J, K only 14) Available with approval option 4 only 15) Available with power supply options A,C, E, G, J, K, L, N, J1B, J1D, J1E, J2A, J2C only 16) Available when ordered with ingress protection seal options P06 … P09 only 17) Available up to 250 °C (482 °F). This option does not automatically implement a food conform design 18) Available with process pressure option 1 only 19) Available up to 250 °C (482 °F) Siemens FI 01 · Update 05/2016 4/125 © Siemens AG 2016 Level Measurement Point level measurement - Rotation paddle switches SITRANS LPS200 ■ Dimensional drawings Standard model: compact version High temperature model: compact version 75 (2.95) Thread length BSP: 20.5 (0.81) NPT: 24 (0.94) 600 °C (1 112 ºF) 400 (15.74) Optional process flange L= Length 150 (5.91) Shaft protected option 1) Process temperature 2) -25 ... +600 °C (-13 ... +428 °F) 200 (7.87) 250 (9.84) 300 (11.81) Angle option L 1) 125 ... 300 (4.92 ... 8.46) Measuring vane Rope option 2 000 (78.74) standard; Can be shortened by the customer; total length available 10 000 (393.7) L 1) Process temperature -25 ... +80 °C (-13 ... +176 °F) 200 (7.87) 100 (3.94) Zone 20 (Cat. 1) L 123 (4.84) Zone 20 (Cat. 1) Rope fixing Measuring vanes 35 (1.38) 106 (4.17) Rectangular Hinged Fold together to lead into mounting hole 50 (1.97) 50 (1.97) A Min. 37 (1.46) Rectangular vane options A B 98 (3.86) Standard 50 (1.97) 250 (9.84) 98 (3.86) 150 (5.90) 98 (3.86) 250 (9.84) 1. For 35 x 106 mm boot shaped and 98 x 200 mm hinged measuring vanes, add 16 mm to extension length. 2. For use with all approval options except CSA class II. See manual for more details. Notes For heavy material, only top mounting of paddle switch is recommended. Compact LPS200 is recommended for side mounting on bins for low or intermediate material levels. SITRANS LPS200, dimensions in mm (inch) 4/126 Siemens FI 01 · Update 05/2016 200 (7.87) Vane B 98 (3.86) 150 (5.90) A 150/250 °C (302/482 ºF) Zone 21 (Cat. 2) 120 (4.72) Zone 21 (Cat. 2) 4 A Ambient temperature -25 ... +60 °C (-13 ... +140 °F) 60 (2.36) Ambient temperature -25 ... +60 °C (-13 ... +140 °F) Process temperature Thread length BSP: 20.5 (0.81) NPT: 24 (0.94) 60 (2.36) Conduit connection M20 or ½" NPT Completely covered with material Covered up to 10 cm (3.93 inch) with material Spring adjustment Spring adjustment Light Boot shaped 35 x 106 mm Boot shaped 28 x 98 mm Rectangular 50 x 98 mm Rectangular 50 x 150 mm Rectangular 50 x 250 mm Rectangular 98 x 150 mm Rectangular 98 x 250 mm Hinged 98 x 200 mm 200 g/l (12.5 lb/ft³) 300 g/l (18.7 lb/ft³) 300 g/l (18.7 lb/ft³) 80 g/l (5.0 lb/ft³) 30 g/l (1.9 lb/ft³) 30 g/l (1.9 lb/ft³) 20 g/l (1.2 lb/ft³) 70 g/l (4.4 lb/ft³) Central (factory setting) 300 g/l (18.7 lb/ft³) 500 g/l (31.2 lb/ft³) 500 g/l (31.2 lb/ft³) 120 g/l (7.5 lb/ft³) 50 g/l (3.1 lb/ft³) 50 g/l (3.1 lb/ft³) 30 g/l (1.9 lb/ft³) 100 g/l (6.2 lb/ft³) Light 100 g/l (6.2 lb/ft³) 150 g/l (9.4 lb/ft³) 150 g/l (9.4 lb/ft³) 40 g/l (2.5 lb/ft³) 15 g/l (0.9 lb/ft³) 15 g/l (0.9 lb/ft³) 15 g/l (0.9 lb/ft³) 35 g/l (2.2 lb/ft³) Central (factory setting) 150 g/l (9.4 lb/ft³) 150 g/l (9.4 lb/ft³) 250 g/l (15.6 lb/ft³) 60 g/l (3.7 lb/ft³) 25 g/l (1.6 lb/ft³) 25 g/l (1.6 lb/ft³) 15 g/l (0.9 lb/ft³) 50 g/l (3.1 lb/ft³) © Siemens AG 2016 Level Measurement Point level measurement - Rotation paddle switches SITRANS LPS200 ■ Schematics AC or DC version, SPDT, fail-safe 8 7 6 5 1 2 L + N PE - Switching and timing behaviour: If the vane is not covered, the rotating vane shaft will send pulses at 20 second intervals. In case of fault, the pulses are missed. After 30 seconds, the alarm relay will open. 24 V or 48 V or 115 V or 230 V AC, 50/60 Hz, 5 VA Alarm output Signal output OR 24 V DC, 2.5 W All voltages ± 15 % 4 Voltage selector AC version DPDT FSH/FSL Universal voltage (DPDT relay) 24 V Max. 4 mm (AWG12) 115 V 2 Max. 4 mm 2 (AWG12) 230 V 8 9 10 7 6 Signal output DPDT 5 1 2 8 L N PE + Power Supply 9 10 7 6 Signal output DPDT 2) 5 4 Alarm output2) 1 2 L N PE + Power Supply With option Fail safe alarm (rotation control). Contact open when de-energised SITRANS LPS200 connections Siemens FI 01 · Update 05/2016 4/127