Find out more: usa.siemens.com/motors Navigate to sites for all parts of Drive Technology US Access all catalogs, brochures, technical information, and other resources Drive Technology SIMOTICS Subject to change without prior notice. All rights reserved. Order No.: NMPC-00600-0414 Printed in USA © 2014 Siemens Industry, Inc. The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual use do not always apply as described or whichmay change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. All product designations may be trademarks or product names of Siemens AG or supplier companies whose use by third parties for their own purposes could violate the rights of the owners. SIMOTICS NEMA Motors • Selection and Pricing Guide • 2014 Siemens Drive Technology Website: SIMOTICS NEMA Motors Low Voltage AC Motors Selection and Pricing Guide usa.siemens.com/motors Follow us on: twitter.com/siemensindustry siemens.com/safety/youtube Siemens Industry, Inc. 3333 Old Milton Parkway Alpharetta, GA 30005 1-800-241-4453 [email protected] D81.2 Edition 04/2014 Answers for industry. Buy With Confidence Buying a motor can be a difficult process. Is it the right size for the application? Is it the right design? Is it going to last? Is it going to perform to its specifications? Will it meet efficiency claims? The last question is easy to answer if NEMA Premium® is on the label. NEMA Premium® Licensees Meet a Higher Standard All motor manufacturers are required to submit efficiency test data to the US Department of Energy to receive their Certificate of Compliance. Data must be compiled at any qualified test facility, including the manufacturers’ own test laboratory. It takes extra to wear the NEMA Premium® label. A NEMA Premium® Licensee has agreed to go beyond minimum US DOE requirements. NEMA Premium® Licensees Must Prove Efficiency Claims What’s on the nameplate is not what you always get when it comes to efficiency. Most manufacturers will attempt to ship what is on the nameplate, but do not always deliver. If you want assurance that a motor meets its efficiency claims, look for a NEMA Premium® certified motor. NEMA Premium® Licensees Must Submit to Third Party Testing NEMA Premium® Licensees are required to ship motors from a distributor’s inventory to a third party qualified laboratory for efficiency verification testing on a regular schedule. The specified motor is randomly selected. NEMA Premium® licensees deliver what they claim, and you can buy with assurance. Table of Contents Introduction Wide Selection of Motors Energy Independence and Security Act (EISA) Warranty and Support Cancellation Charges and Change Notices General Capabilities for Use with Adjustable Speed Drives Website and Tools Motor Selection and Pricing SIMOTICS General Purpose Motors GP100A (Aluminum Frame) – 460V Aluminum Rotor Copper Rotor GP100A (Aluminum Frame) – 575V GP100 – 460V Aluminum Rotor Copper Rotor GP100 – 575V SIMOTICS Severe Duty Motors SD100 – 460V Aluminum Rotor Copper Rotor SD100 – 575V SD100 IEEE841 – 460V Aluminum Rotor Copper Rotor SD100 IEEE841 – 575V SD661 – 460V and 575V Aluminum Rotor SIMOTICS Explosion Proof Motors XP100 – 460V Class I Group C&D Class II Group F&G, Division 1 XP100 – 575V Class I Group C&D Class II Group F&G, Division 1 1-6 1-7 Inverter Duty RGKESDI / RGZESDI Constant Torque – 1000:1 2-1 2-2 2-5 2-6 2-9 2-10 2-14 2-16 2-21 2-22 2-26 2-28 2-33 2-34 2-39 2-40 SIMOTICS Definite Purpose Motors Multi Speed SD10 MS – 460V and 575V 1 Winding Variable Torque (1800/900 RPM) 1-1 1-2 1-3 1-5 Vertical Solid Shaft RGZVESD Normal Thrust RGZVILESD In-Line Thrust Special Features Detail Special Features Detail Overview Options Selection and Pricing Typical Performance Data Technical Notes SIMOTICS General Purpose and Severe Duty Motors GP100A / GP100 Aluminum Rotor Copper Rotor 2-61 2-62 2-64 2-67 2-71 3-2 3-10 4-1 4-2 4-4 2-45 2-46 SIMOTICS Explosion Proof Motors XP100 / XP100 ID1 4-8 2-47 SIMOTICS Definite Purpose Motors SD10 MS 4-10 2-48 2-52 XP100 ID1 – 460 Class I Group D, Division 1 2-55 2-56 XP100 ID1 – 575V Class I Group D, Division 1 2-59 SD100 / SD100 IEEE841 Aluminum Rotor Copper Rotor 4-5 4-7 RGKESDI / RGZESDI CT 1000:1 4-11 RGZVESD / RGZVILESDI 4-13 2014 Low Voltage AC Motors Selection and Pricing Guide Table of Contents General Dimensions SIMOTICS General Purpose Motors GP100A GP100 5-1 5-2 SIMOTICS Severe Duty Motors SD100 SD100 IEEE841 5-6 5-10 SIMOTICS Explosion Proof Motors XP100 / XP100 ID1 5-15 SIMOTICS Definite Purpose Motors SD10 MS RGZVESD / RGZVEILSD 5-19 5-23 SIMOTICS Conduit Boxes General Purpose GP100A / GP100 Severe Duty SD100 / SD100 IEEE841 / SD10 MS Explosion Proof XP100 / XP100 ID1 Definite Purpose RGZ Motors Part Number Index SIMOTICS NEMA Motors 2014 Low Voltage AC Motors Selection and Pricing Guide 5-24 5-25 5-26 5-27 6-1 Introduction Introduction Wide selection of motors General Purpose Motors Severe Duty Motors Wide selection Providing value also means having the right motor for the job. At Siemens, we strive to offer a wide variety of motor types, in all frame sizes and power ratings with a comprehensive set of options and quick modifications. As you read these words, our highly qualified research and development group is working to add to this list as part of our commitment to become your single source for motors. Siemens stocking facilities & motor modification centers Siemens motor manufacturing Need something special? Our modification centers have complete motor modification capabilities to help you get the exact motor you need, when you need it. Iron-clad quality The quality of our motors begins with the design experience we have gained through more than 100 years of manufacturing and installing motors. We build on this experience every day with new designs that incorporate the latest materials and techniques to provide even higher levels of performance, operating efficiency and reliability. Special Features Detail These advanced motor designs are manufactured in a state-of-the-art, ISO 9001 certified facility. Here, our manufacturing technicians subject each motor to more than 100 separate quality inspections before it leaves our plant ensuring it meets the high standards our customers expect. Options Selection and Pricing Typical Performance Data Total customer support When you’re looking for a motor, look for a highly trained specialist to help you match the right motor to your specific needs. Siemens sales engineers have the knowledge, training and experience to help you solve performance or installation challenges to ensure that you will receive the best value for your investment. Our customer service center takes pride in putting our customers first. Whether it’s an expedited shipment, tracking your order, or making sure your motor is properly installed, these professionals won’t be satisfied until you are. Availability Siemens has hundreds of distributor stocking locations throughout North America with a wide selection of NEMA and IEC frame sizes and ratings. Motors are available same day from a local source you can trust. Definite Purpose Motors The world’s most energy efficient line of motors Lower your energy costs today with the world’s most energy efficient line of motors. New regulatory standards and rising energy costs create increasing pressure to maximize energy efficiency and reduce your carbon footprint. Siemens breakthrough copper-rotor motors have set new standards for efficiency. By adding copper to the stator windings, Siemens has developed motors that can withstand the heat. Two-thirds of an AC induction motor’s electrical loss occurs in the stator. The addition of the copper rotor reduces wasteful, resistive heating. Copper’s volumetric electrical conductivity is approximately 66% higher than aluminum, thus providing us with the opportunity to offer motors that can exceed the efficiency requirements of MG Table 12-12. Siemens stocking distributor Hazardous Duty Motors The right efficiency for your application To meet your cost of ownership and motor management needs, Siemens offers several levels of energy efficiency in many of its motors: • Energy Efficient (MG1 Table 12-11) • NEMA Premium® (MG1 Table 12-12) • NEMA Premium® Plus General Dimensions 1-1 Part Number Index 2014 Low Voltage AC Motors Selection and Pricing Guide Introduction Energy Independence and Security Act (EISA) Effective with motors manufactured after December 19, 2010 Requirements of the law: Products previously required to meet EPAct efficiencies (NEMA MG1, table 12-11) must meet NEMA Premium® 1) efficiencies (NEMA MG1, table 12-12) Certain products not previously covered by EPAct must meet EPAct (NEMA MG1, table 12-11) efficiencies: Design C U-Frame 8-pole (900 rpm) 201-500 HP General Purpose C-face and D-flange w/o feet Close Coupled Pump (CCP) Vertical solid shaft normal thrust (P-base) 3-phase motors 600 volts and below Siemens NEMA Premium® product portfolio: Siemens offers a complete line of general purpose (aluminum and cast iron construction), severe duty, IEEE841, XP and IEC motors with NEMA Premium® or higher efficiencies. Industryleading, die cast copper rotors are available, 1-20 HP with GP, SD and IEEE841 motors, offering efficiencies higher than NEMA Premium® requirements. Always look for products offered with the NEMA Premium® logo. 1) NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. 1-2 2014 Low Voltage AC Motors Selection and Pricing Guide Introduction Introduction Warranty and support Warranty procedure Hazardous Duty Motors THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES (EXCEPT TITLE), INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, AND CONSTITUTES THE ONLY WARRANTY OF COMPANY WITH RESPECT TO THE GOODS. Definite Purpose Motors The foregoing states Purchasers exclusive remedy against Company and its suppliers for any defect in the goods or for failure of the goods to be as warranted, whether Purchaser’s remedy is based on contract, warranty, failure of such remedy to achieve its essential purpose, tort (including negligence), indemnity or any other legal theory, and whether arising out of warranties, representations, instructions, installations or defects from any cause. Special Features Detail If within one year from date of operation, but not more than eighteen months from date of shipment by Company, of any item of the goods, purchaser discovers that such item was not as warranted above and promptly notifies company in written thereof, Company shall remedy such defect by, at Company’s option, adjustment, repair, or replacement of the item and any affected part of the goods. Purchaser shall assume all responsibility and expense for removal, reinstallation and freight in connection with the foregoing remedy. The same obligations and conditions shall extend to replacement items furnished by company here under. Company shall have the right of disposal of items replaced by it. Purchaser shall grant Company to determine any defect in the goods. In the event that adjustment, repair or replacement does not remedy the defect, the Company and Purchaser shall negotiate in good faith an equitable adjustment in the contract price. The Company’s responsibility does not extend to any item of the goods which has not been manufactured and sold by Company. Such item shall be covered only by express warranty, if any, of the manufacture thereof. The Company and its suppliers shall also have no responsibility if the goods have been improperly stored, handled, or installed or if the goods have not been operated or maintained according to their ratings or according to instructions in Company or supplier furnished manuals, or if unauthorized repairs or modifications have been made to the goods. Severe Duty Motors Standard terms and conditions of sale Warranty – Company warrants that on the date of shipment to purchaser the goods will be of the kind and quality described herein, merchantable, and free of defects in workmanship and material. Service calls and overtime are not covered under Siemens warranty policy. General Purpose Motors Siemens Industry, Inc. Drive Technology SIMOTICS NEMA Motors SIMOTICS warranty type 12 Months 18 Months GP100, GP100A 3 years RGZESDI, RGZVESD, RGZVILESD SD10, SD100, XP100, XP100 ID1 5 years SD100 IEEE841 In Service After Shipment Which ever comes first Options Selection and Pricing A. After shipment After shipment C. Purchaser’s Responsibility Transportation damage claims Removal Freight D. Specifically Excludes Improper storage In and out costs E. Shipment Normal FOB our dock Freight allowed General Dimensions Siemens option Repair Replace Typical Performance Data B. Remedy 2014 Low Voltage AC Motors Selection and Pricing Guide 1-3 Part Number Index NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. Introduction Warranty and support Reference notes 1. After the inspection, contact Little Rock Plant for authorization of repair or replacement. Unapproved repairs will be denied. 2. Removal, reinstallation, freight and service calls are NOT covered by warranty. 3. A standard EASE Warranty report must be filled out and a Siemens job/p.o. # issued. The Warranty report and nameplate (if motor scrapped in the field) plus the invoice must be sent to the Little Rock Plant. 4. Premium efficiency motors will modify major repair pricing by increasing schedule 10%. 5. Allowances listed are for open drip-proof and totally enclosed, non-ventilated motors with class B or F insulation and all voltages between 100 and 600 volts. For variations consult factory. 6. Minor repairs – consist of all the operations listed under minor repairs plus the cost of material and rewinding of stator. If no allowance is shown, consult the factory. 7. Major repairs-consist of all the operations listed under major repairs plus the cost of material and rewinding of stator. If no allowance is shown, consult the factory. 8. Shaded areas represent units that will be replaced when possible, without repairs. 9. Replacement Parts – will be furnished at no Charge from the factory, i.e. bearings for 40 HP and above. 10. Replacement Motors – will be furnished at no Charge from the factory. Should it be necessary for reasons of expediency for the service shop to replace a motor from their stock, a replacement motor will be furnished at no Charge from the factory, shipped Freight allowed. 11. Defective parts, i.e. bearings, are subject to return upon request to the factory for inspection and approval for reimbursement. 1-4 2014 Low Voltage AC Motors Selection and Pricing Guide Date coding Siemens SIMOTICS motors are date coded by the model number/date code/serial number on the nameplate. Siemens date codes for NEMA frame size, low voltage motors built in USA and Mexico is as follows: The first digit is alphabetic and represents the month. The second and third digits are numeric and are the last two digits of the year. A = January G = July B = February H = August C = March J = September D = April K = October E = MayL = November F = June M = December IMPORTANT NOTICE MAIL INVOICE PLUS PROPER WARRANTY REPAIR REPORT TO THE WARRANTY ADMINISTRATOR. IF SIEMENS IS TO BE BILLED FOR OVERTIME, AUTHORIZATION MUST BE OBTAINED FROM WARRANTY ADMINISTRATOR BEFORE OVERTIME WORK IS PERFORMED. MATERIAL AND SERVICES ARE PURCHASED FOR RESALE AND ARE EXEMPT FROM STATE AND LOCAL SALES AND USE TAX. Introduction Introduction Cancellation charges and change notices Change notice All change notices applied to in-process orders logged into the Siemens customer service department and requiring a product change will be subject to a $100 net charge plus the applicable modification adder. Delivery dates will be adjusted according to the type of change/ modification requested. This policy does not pertain to commercial Changes such as “ship to” or “bill to” addresses. Hazardous Duty Motors Non-stock motors • For non-stock motors, the following graph will apply to determine cancellation charges after the order is received and entered at the factory. Completion progress will be determined by a Siemens Customer Service Representative. • A charge of 15% of the total net motor price will be assessed if an order is cancelled after it has been released for engineering and drafting whether or not the drawings have been completed and/or submitted for approval. Severe Duty Motors Stock motors • No charges will be incurred if an order is cancelled prior to shipment. • A stock motor is returnable (freight paid by purchaser) immediately after shipment if returned in “new” condition (original, undamaged packaging) for a minimum restocking charge of 20% of the motor net price. General Purpose Motors Cancellation charges Note: A minimum charge of $100 will be assessed for any order cancellation for modified or custom motors. Definite Purpose Motors Special Features Detail Cancellation Charges for NON-Stock Motors Options Selection and Pricing Typical Performance Data General Dimensions 1-5 Part Number Index 2014 Low Voltage AC Motors Selection and Pricing Guide Introduction General capabilities for use with adjustable speed drives In addition to our variable speed drive only motors, the SIMOTICS product line of motors also offer a variable speed drive operation for both severe duty and general purpose applications as well as for explosion proof classifications areas. In general, our standard line design is suitable for inverter or vector applications where a maximum of 4:1 constant torque is required, motors with copper rotor design GP100, SD100 and SD100 IEEE841 can provide up to 10:1 Constant torque and our Severe Duty line in four pole motors frame sizes 143-365 is suitable for up to 20:1 constant torque. SIMOTICS NEMA Motors NEMA Premium® Max. Horse Power Frame Size Poles Constant Torque GP100A 20HP 143T-256T 2-8 15 Hz – 60 Hz 3 Hz – 60 Hz GP100 200HP 143T-449T 2-8 15 Hz – 60 Hz 3 Hz – 60 Hz SD100 1) 75HP 143T-365T 2-8 3 Hz – 60 Hz 5) 3 Hz – 60 Hz 150HP 400T- 445T 4 2, 6, 8 6 Hz – 60 Hz 3) 15 Hz – 60 Hz 2, 3) 3 Hz – 60 Hz 200HP 447T 4 2, 6, 8 10 Hz – 60 Hz 3) 15 Hz – 60 Hz 2, 5) 3 Hz – 60 Hz 400HP 449T- S449T 2-8 15 Hz – 60 Hz 5) 3 Hz – 60 Hz 3 Hz – 60 Hz SD100 IEEE841 1) Variable Torque 75HP 143T-365T 2-8 3 Hz – 60 Hz 5) 15 Hz – 60 Hz 150HP 400T- 445T 4, 2, 6, 8 6 Hz – 60 Hz 2, 3) 15 Hz – 60 Hz 5) 3 Hz – 60 Hz 200HP 447T 4, 2, 6, 8 10 Hz – 60 Hz 2, 3) 15 Hz – 60 Hz 5) 3 Hz – 60 Hz 400HP 449T-S449T 2-8 15 Hz – 60 Hz 5) 3 Hz – 60 Hz 50HP 143T-326T 2-8 15 Hz – 60 Hz 3 Hz – 60 Hz 200HP 364T-447T 2-8 15 Hz – 60 Hz 4) 3 Hz – 60 Hz 250HP 449T 2-8 15 Hz – 60 Hz 4) 3 Hz – 60 Hz XP100 ID1 300HP 143T-449T 2-8 15 Hz – 60 Hz 0.6 Hz – 60 Hz NEMA Premium®+ (Cu Rotor) Max. Horse Power Frame Size Poles Constant Torque* Variable Torque GP100A 20HP 143T-256T 2-6 6 Hz – 60 Hz 3 Hz – 60 Hz GP100 20HP 143T-256T 2-6 6 Hz – 60 Hz 3 Hz – 60 Hz XP100 SD100 20HP 143T-256T 2-6 3 Hz – 60 Hz 3 Hz – 60 Hz SD100 IEEE841 20HP 143T-256T 2-6 3 Hz – 60 Hz 3 Hz – 60 Hz Also available for use in Class I Division 2, Groups A, B, C or D, or Zone 2 Requires cooling fan modification (M05) 3) 15Hz - 60Hz as standard 1) 4) 2) 5) 1-6 2014 Low Voltage AC Motors Selection and Pricing Guide On request Four pole motors are marked with VFD capability on the nameplate as standard Introduction Introduction Selection and configuration tools General Purpose Motors Severe Duty Motors In our Website you will find all sorts of useful information, pre-sales information, technical information, contacts and local partners as well as on-line support. www.usa.siemens.com/nema-motors Hazardous Duty Motors Definite Purpose Motors The DT configurator has been developed to facilitate the selection of motors and its wide range of special features. It is integrated as an offline “Selection Tool” in the interactive catalog CA01 and is also available on line. The DT Configurator not only renders the correct ordering part number for you, but also provides all relevant documentation to the selection, operating instructions, data sheets, curves and dimensional drawings. www.siemens.com/dtconfigurator Special Features Detail Options Selection and Pricing Sizer configuration tool provides an easy-to-use means for configuring drives and controls while at the same time supports all engineering steps in one workflow: • Configuring the power supply • Motor and gearbox design, including calculations of mechanical transmission elements • Configuring the drive components • Selecting the required accessories • Selecting the line-side and motor-side power options, e.g. cables, filters and reactors Part Number Index 1-7 General Dimensions 2014 Low Voltage AC Motors Selection and Pricing Guide Typical Performance Data The energy-saving program SinaSave is suitable for application with motors for on-line fed operation (fixed speed) and inverter-fed operations (variable speed). With on-line operation, you can calculate the cost savings as well as the amortization time for the additional cost of the Siemens energy-saving motors with three different comparison cases, efficiency comparison, motor comparison and overall plant analysis. Introduction SIMOTICS General purpose motors GP100A (Aluminum frame) General Purpose Motors ® C US Modifiable – Siemens SIMOTICS GP100A motors are available with a variety of QuikMOD modifications and kits. ee 1-20 HP 143T-256T NEMA Premium® Plus NEMA Premium® 143T-256T 143T-256T 3 phase 60Hz 1-20HP 1-20HP NEMA design B NEMA MG1 Part 31 1.15 WARRANTY Efficiency Voltage 208-230 / 460 V 575 V Insulation Insulation Class F Service Factor @ 40ºC Temperature rise (Sine wave) Stator Rotor, die cast copper Rotor, die cast aluminum Random wound copper 143T-256T 143T-256T Die cast aluminum O-ring Oversized 143T-256T 143T-256T Double shielded Bearing housing Grease Inlet / relief fittings 143T-256T Aluminum Polyurea base no Cover Bidirectional fan Plastic - 143T-256T 143T-256T Nameplate Lifting eyebolt Paint Rust resistant Zinc plated Aluminum engraved Cast in Alkyd Modified - RAL7030 Variable torque 20:1 Constant torque 10:1 Constant torque 4:1 143T-256T Copper rotor 143T-256T Aluminum rotor 143T-256T Frame Stator/Windings rotor Conduit box Special Features Detail 8 hole feet Condensation drains High strength carbon steel shaft V ring slinger - IP54 Class B @ 1.0SF Class F @ 1.15SF Die Cast Aluminum Bolt-on Drain holes Two on lowest point in frame C1045 DE only Definite Purpose Motors Frame Size MONTH Hazardous Duty Motors HP range Severe Duty Motors GP100A general purpose TEFC motors are available in two configurations – they exceed NEMA Premium® efficiency with our exclusive, leading-edge, die cast copper rotor design or meet NEMA Premium® efficiency with our die cast aluminum rotor design. Either way, these motors significantly reduce operating costs and pay for themselves in a short time through energy savings. These industry workhorses are ideal for use in material handling, pump, fan, compressor and other industrial applications. Options Selection and Pricing Bearings Fan and fan cover Typical Performance Data Hardware Polyproplene Inverter duty General Dimensions Warranty 18 months N/A Hazardous classification Service factor 1.0 Service factor 1.15 2014 Low Voltage AC Motors Selection and Pricing Guide 2-1 Part Number Index NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. SIMOTICS General purpose motors GP100A (Aluminum frame) NEMA Premium® Die cast aluminum rotor 460V 60Hz – Foot mounted HP RPM Frame Voltage Type Part Number List price $ Multi. Symb. FL amps FL Nom Eff. (%) Lbs 1 3600 143T 208-230/460 GP100A 1LE21211AA114AA3 429 GPA2 1.4 82.5 29 1 1800 143T 208-230/460 GP100A 1LE21211AB214AA3 429 GPA2 1.4 85.5 41 1 1200 145T 208-230/460 GP100A 1LE21211AC314AA3 533 GPA2 1.6 82.5 45 1.5 3600 143T 208-230/460 GP100A 1LE21211AA214AA3 440 GPA2 2.0 84.0 35 1.5 1800 145T 208-230/460 GP100A 1LE21211AB314AA3 471 GPA2 2.1 86.5 47 1.5 1200 182T 208-230/460 GP100A 1LE21211CC114AA3 570 GPA2 2.4 87.5 63 2 3600 145T 208-230/460 GP100A 1LE21211AA314AA3 511 GPA2 2.5 85.5 38 2 1800 145T 208-230/460 GP100A 1LE21211AB414AA3 513 GPA2 2.8 86.5 46 2 1200 184T 208-230/460 GP100A 1LE21211CC314AA3 629 GPA2 3.2 88.5 72 3 3600 182T 208-230/460 GP100A 1LE21211CA114AA3 570 GPA2 3.8 86.5 57 3 1800 182T 208-230/460 GP100A 1LE21211CB114AA3 590 GPA2 4.0 89.5 68 3 1200 213T 208-230/460 GP100A 1LE21212AC114AA3 809 GPA2 4.3 89.5 104 5 3600 184T 208-230/460 GP100A 1LE21211CA314AA3 741 GPA2 6.0 88.5 67 5 1800 184T 208-230/460 GP100A 1LE21211CB314AA3 671 GPA2 6.5 89.5 74 5 1200 215T 208-230/460 GP100A 1LE21212AC214AA3 1207 GPA2 6.7 89.5 116 7.5 3600 213T 208-230/460 GP100A 1LE21212AA114AA3 969 GPA2 8.8 89.5 100 7.5 1800 213T 208-230/460 GP100A 1LE21212AB114AA3 939 GPA2 9.7 91.7 130 7.5 1200 254T 208-230/460 GP100A 1LE21212BC114AA3 1540 GPA2 10.0 91.0 200 10 3600 215T 208-230/460 GP100A 1LE21212AA214AA3 1142 GPA2 11.5 90.2 113 10 1800 215T 208-230/460 GP100A 1LE21212AB214AA3 1142 GPA2 12.5 91.7 136 10 1200 256T 208-230/460 GP100A 1LE21212BC214AA3 1814 GPA2 13.5 91.0 196 15 3600 254T 208-230/460 GP100A 1LE21212BA114AA3 1493 GPA2 17.5 91.0 196 15 1800 254T 208-230/460 GP100A 1LE21212BB114AA3 1457 GPA2 19.0 92.4 198 20 3600 256T 208-230/460 GP100A 1LE21212BA214AA3 1848 GPA2 22.5 91.0 231 20 1800 256T 208-230/460 GP100A 1LE21212BB214AA3 1755 GPA2 25.0 93.0 229 NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. 2-2 2014 Low Voltage AC Motors Selection and Pricing Guide Stock Stock availability subject to change. Prices and Specifications are subject to change without notice. DOE#CC 032A HP RPM Frame Voltage Type Part Number List price $ Multi. Symb. FL amps FL Nom Eff. (%) Lbs 1 3600 143TC 208-230/460 GP100A 1LE21211AA114EA3 535 GPA2 1.4 82.5 29 1 1800 143TC 208-230/460 GP100A 1LE21211AB214EA3 535 GPA2 1.4 85.5 41 145TC 208-230/460 GP100A 1LE21211AC314EA3 642 GPA2 1.6 82.5 45 3600 143TC 208-230/460 GP100A 1LE21211AA214EA3 546 GPA2 2.0 84.0 35 1.5 1800 145TC 208-230/460 GP100A 1LE21211AB314EA3 578 GPA2 2.1 86.5 47 1.5 1200 182TC 208-230/460 GP100A 1LE21211CC114EA3 723 GPA2 2.4 87.5 63 2 3600 145TC 208-230/460 GP100A 1LE21211AA314EA3 619 GPA2 2.5 85.5 38 2 1800 145TC 208-230/460 GP100A 1LE21211AB414EA3 621 GPA2 2.8 86.5 46 2 1200 184TC 208-230/460 GP100A 1LE21211CC314EA3 784 GPA2 3.2 88.5 72 3600 182TC 208-230/460 GP100A 1LE21211CA114EA3 723 GPA2 3.8 86.5 57 1800 182TC 208-230/460 GP100A 1LE21211CB114EA3 744 GPA2 4.0 89.5 68 3 1200 213TC 208-230/460 GP100A 1LE21212AC114EA3 969 GPA2 4.3 89.5 104 5 3600 184TC 208-230/460 GP100A 1LE21211CA314EA3 895 GPA2 6.0 88.5 67 5 1800 184TC 208-230/460 GP100A 1LE21211CB314EA3 828 GPA2 6.5 89.5 74 5 1200 215TC 208-230/460 GP100A 1LE21212AC214EA3 1379 GPA2 6.7 89.5 116 3600 213TC 208-230/460 GP100A 1LE21212AA114EA3 1134 GPA2 8.8 89.5 100 1800 213TC 208-230/460 GP100A 1LE21212AB114EA3 1103 GPA2 9.7 91.7 130 7.5 1200 254TC 208-230/460 GP100A 1LE21212BC114EA3 1772 GPA2 10.0 91.0 200 10 3600 215TC 208-230/460 GP100A 1LE21212AA214EA3 1312 GPA2 11.5 90.2 113 10 1800 215TC 208-230/460 GP100A 1LE21212AB214EA3 1312 GPA2 12.5 91.7 136 10 1200 256TC 208-230/460 GP100A 1LE21212BC214EA3 2054 GPA2 13.5 91.0 196 3600 254TC 208-230/460 GP100A 1LE21212BA114EA3 1723 GPA2 17.5 91.0 196 1800 254TC 208-230/460 GP100A 1LE21212BB114EA3 1686 GPA2 19.0 92.4 198 20 3600 256TC 208-230/460 GP100A 1LE21212BA214EA3 2089 GPA2 22.5 91.0 231 20 1800 256TC 208-230/460 GP100A 1LE21212BB214EA3 1993 GPA2 25.0 93.0 229 Options Selection and Pricing 15 15 Special Features Detail 7.5 7.5 Definite Purpose Motors 3 3 Hazardous Duty Motors 1200 Severe Duty Motors 1 1.5 Stock General Purpose Motors GP100A (Aluminum frame) NEMA Premium® Die cast aluminum rotor 460V 60Hz – C-face Foot mounted Introduction SIMOTICS General purpose motors Typical Performance Data General Dimensions Stock availability subject to change. Prices and Specifications are subject to change without notice. DOE#CC 032A 2014 Low Voltage AC Motors Selection and Pricing Guide 2-3 Part Number Index NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. SIMOTICS General purpose motors GP100A (Aluminum frame) NEMA Premium® Die cast aluminum rotor 460V 60Hz – C-face Footless HP RPM Frame Voltage Type Part Number List price $ Multi. Symb. FL amps FL Nom Eff. (%) Lbs 1 3600 143TC 208-230/460 GP100A 1LE21211AA114GA3 519 GPA2 1.4 82.5 29 1 1800 143TC 208-230/460 GP100A 1LE21211AB214GA3 519 GPA2 1.4 85.5 41 1 1200 145TC 208-230/460 GP100A 1LE21211AC314GA3 623 GPA2 1.6 82.5 45 1.5 3600 143TC 208-230/460 GP100A 1LE21211AA214GA3 530 GPA2 2.0 84.0 35 1.5 1800 145TC 208-230/460 GP100A 1LE21211AB314GA3 561 GPA2 2.1 86.5 47 1.5 1200 182TC 208-230/460 GP100A 1LE21211CC114GA3 702 GPA2 2.4 87.5 63 2 3600 145TC 208-230/460 GP100A 1LE21211AA314GA3 601 GPA2 2.5 85.5 38 2 1800 145TC 208-230/460 GP100A 1LE21211AB414GA3 603 GPA2 2.8 86.5 46 2 1200 184TC 208-230/460 GP100A 1LE21211CC314GA3 761 GPA2 3.2 88.5 72 3 3600 182TC 208-230/460 GP100A 1LE21211CA114GA3 702 GPA2 3.8 86.5 57 3 1800 182TC 208-230/460 GP100A 1LE21211CB114GA3 722 GPA2 4.0 89.5 68 3 1200 213TC 208-230/460 GP100A 1LE21212AC114GA3 941 GPA2 4.3 89.5 104 5 3600 184TC 208-230/460 GP100A 1LE21211CA314GA3 873 GPA2 6.0 88.5 67 5 1800 184TC 208-230/460 GP100A 1LE21211CB314GA3 803 GPA2 6.5 89.5 74 5 1200 215TC 208-230/460 GP100A 1LE21212AC214GA3 1339 GPA2 6.7 89.5 116 7.5 3600 213TC 208-230/460 GP100A 1LE21212AA114GA3 1101 GPA2 8.8 89.5 100 7.5 1800 213TC 208-230/460 GP100A 1LE21212AB114GA3 1071 GPA2 9.7 91.7 130 7.5 1200 254TC 208-230/460 GP100A 1LE21212BC114GA3 1720 GPA2 10.0 91.0 200 10 3600 215TC 208-230/460 GP100A 1LE21212AA214GA3 1274 GPA2 11.5 90.2 113 10 1800 215TC 208-230/460 GP100A 1LE21212AB214GA3 1274 GPA2 12.5 91.7 136 10 1200 256TC 208-230/460 GP100A 1LE21212BC214GA3 1994 GPA2 13.5 91.0 196 15 3600 254TC 208-230/460 GP100A 1LE21212BA114GA3 1673 GPA2 17.5 91.0 196 15 1800 254TC 208-230/460 GP100A 1LE21212BB114GA3 1637 GPA2 19.0 92.4 198 20 3600 256TC 208-230/460 GP100A 1LE21212BA214GA3 2028 GPA2 22.5 91.0 231 20 1800 256TC 208-230/460 GP100A 1LE21212BB214GA3 1935 GPA2 25.0 93.0 229 NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. 2-4 2014 Low Voltage AC Motors Selection and Pricing Guide Stock Stock availability subject to change. Prices and Specifications are subject to change without notice. DOE#CC 032A NEMA Premium® Die cast copper rotor 460V 60Hz – Foot mounted Voltage 208-230/460 208-230/460 Type GP100A GP100A Part Number 1LE21111AB214AA3 1LE21111AC314AA3 List Price $ 476 593 Mult. Symb. GPA2 GPA2 FL Amps 1.5 1.6 FL Nom Eff. (%) 86.5 84.0 Lbs 47 48 1.5 1.5 2 2 3 3 3 5 5 5 7.5 7.5 7.5 10 10 10 15 15 20 20 3600 1800 3600 1800 3600 1800 1200 3600 1800 1200 3600 1800 1200 3600 1800 1200 3600 1800 3600 1800 143T 145T 145T 145T 182T 182T 213T 184T 184T 215T 213T 213T 254T 215T 215T 256T 254T 254T 256T 256T 208-230/460 208-230/460 208-230/460 208-230/460 208-230/460 208-230/460 208-230/460 208-230/460 208-230/460 208-230/460 208-230/460 208-230/460 208-230/460 208-230/460 208-230/460 208-230/460 208-230/460 208-230/460 208-230/460 208-230/460 GP100A GP100A GP100A GP100A GP100A GP100A GP100A GP100A GP100A GP100A GP100A GP100A GP100A GP100A GP100A GP100A GP100A GP100A GP100A GP100A 1LE21111AA214AA3 1LE21111AB314AA3 1LE21111AA314AA3 1LE21111AB414AA3 1LE21111CA114AA3 1LE21111CB114AA3 1LE21112AC114AA3 1LE21111CA314AA3 1LE21111CB314AA3 1LE21112AC214AA3 1LE21112AA114AA3 1LE21112AB114AA3 1LE21112BC114AA3 1LE21112AA214AA3 1LE21112AB214AA3 1LE21112BC214AA3 1LE21112BA114AA3 1LE21112BB114AA3 1LE21112BA214AA3 1LE21112BB214AA3 488 524 567 569 633 656 899 824 746 1340 1076 1043 1796 1269 1269 2115 1742 1701 2156 2046 GPA2 GPA2 GPA2 GPA2 GPA2 GPA2 GPA2 GPA2 GPA2 GPA2 GPA2 GPA2 GPA2 GPA2 GPA2 GPA2 GPA2 GPA2 GPA2 GPA2 1.9 2.1 2.6 2.8 3.8 4.0 4.3 6.2 6.7 7.0 8.5 9.5 10.5 11.5 12.5 13.5 17.0 19.0 22.5 25.0 87.5 87.5 88.5 87.5 89.5 90.2 90.2 90.2 90.2 90.2 91.7 92.4 92.4 91.7 92.4 92.4 92.4 93.0 92.4 93.6 45 48 45 48 71 75 110 73 79 123 130 137 244 135 144 245 218 207 241 248 Stock Definite Purpose Motors Frame 143T 145T Hazardous Duty Motors RPM 1800 1200 Severe Duty Motors HP 1 1 General Purpose Motors GP100A (Aluminum frame) Introduction SIMOTICS General purpose motors Special Features Detail Options Selection and Pricing Typical Performance Data General Dimensions Stock availability subject to change. Prices and Specifications are subject to change without notice. DOE#CC 032A 2014 Low Voltage AC Motors Selection and Pricing Guide 2-5 Part Number Index NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. SIMOTICS General purpose motors GP100A (Aluminum frame) NEMA Premium® Die cast aluminum rotor 575V 60Hz – Foot mounted HP RPM Frame Voltage Type Part Number List Price $ Multi. Symb. FL Amps FL Nom Eff. (%) Lbs 1 3600 143T 575 GP100A 1LE21211AA113AA3 429 GPA2 1.1 82.5 29 1 1800 143T 575 GP100A 1LE21211AB213AA3 429 GPA2 1.1 85.5 41 1 1200 145T 575 GP100A 1LE21211AC313AA3 533 GPA2 1.3 82.5 45 1.5 3600 143T 575 GP100A 1LE21211AA213AA3 440 GPA2 1.6 84.0 35 1.5 1800 145T 575 GP100A 1LE21211AB313AA3 471 GPA2 1.7 86.5 47 1.5 1200 182T 575 GP100A 1LE21211CC113AA3 570 GPA2 1.9 87.5 63 2 3600 145T 575 GP100A 1LE21211AA313AA3 511 GPA2 2.0 85.5 38 2 1800 145T 575 GP100A 1LE21211AB413AA3 513 GPA2 2.2 86.5 46 2 1200 184T 575 GP100A 1LE21211CC313AA3 629 GPA2 2.6 88.5 72 3 3600 182T 575 GP100A 1LE21211CA113AA3 570 GPA2 3.0 86.5 57 3 1800 182T 575 GP100A 1LE21211CB113AA3 590 GPA2 3.2 89.5 68 3 1200 213T 575 GP100A 1LE21212AC113AA3 809 GPA2 3.4 89.5 104 5 3600 184T 575 GP100A 1LE21211CA313AA3 741 GPA2 4.8 88.5 67 5 1800 184T 575 GP100A 1LE21211CB313AA3 671 GPA2 5.2 89.5 74 5 1200 215T 575 GP100A 1LE21212AC213AA3 1207 GPA2 5.4 89.5 116 7.5 3600 213T 575 GP100A 1LE21212AA113AA3 969 GPA2 7.0 89.5 100 7.5 1800 213T 575 GP100A 1LE21212AB113AA3 939 GPA2 7.8 91.7 130 7.5 1200 254T 575 GP100A 1LE21212BC113AA3 1540 GPA2 8.0 91.0 200 10 3600 215T 575 GP100A 1LE21212AA213AA3 1142 GPA2 9.2 90.2 113 10 1800 215T 575 GP100A 1LE21212AB213AA3 1142 GPA2 10.0 91.7 136 10 1200 256T 575 GP100A 1LE21212BC213AA3 1814 GPA2 11.0 91.0 196 15 3600 254T 575 GP100A 1LE21212BA113AA3 1493 GPA2 14.0 91.0 196 15 1800 254T 575 GP100A 1LE21212BB113AA3 1457 GPA2 15.0 92.4 198 20 3600 256T 575 GP100A 1LE21212BA213AA3 1848 GPA2 18.0 91.0 231 20 1800 256T 575 GP100A 1LE21212BB213AA3 1755 GPA2 20.0 93.0 229 NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. 2-6 2014 Low Voltage AC Motors Selection and Pricing Guide Stock Stock availability subject to change. Prices and Specifications are subject to change without notice. DOE#CC 032A NEMA Premium® Die cast aluminum rotor 575V 60Hz – C-face Foot mounted HP RPM Frame Voltage Type Part Number List price $ Multi. Symb. FL amps FL Nom Eff. (%) Lbs 1 3600 143TC 575 GP100A 1LE21211AA113EA3 535 GPA2 1.1 82.5 29 1 1800 143TC 575 GP100A 1LE21211AB213EA3 535 GPA2 1.1 85.5 41 1LE21211AC313EA3 642 GPA2 1.3 82.5 45 GP100A 1LE21211AA213EA3 546 GPA2 1.6 84.0 35 1.5 1800 145TC 575 GP100A 1LE21211AB313EA3 578 GPA2 1.7 86.5 47 1.5 1200 182TC 575 GP100A 1LE21211CC113EA3 723 GPA2 1.9 87.5 63 2 3600 145TC 575 GP100A 1LE21211AA313EA3 619 GPA2 2.0 85.5 38 2 1800 145TC 575 GP100A 1LE21211AB413EA3 621 GPA2 2.2 86.5 46 2 1200 184TC 575 GP100A 1LE21211CC313EA3 784 GPA2 2.6 88.5 72 3 3600 182TC 575 GP100A 1LE21211CA113EA3 723 GPA2 3.0 86.5 57 3 1800 182TC 575 GP100A 1LE21211CB113EA3 744 GPA2 3.2 89.5 68 3 1200 213TC 575 GP100A 1LE21212AC113EA3 969 GPA2 3.4 89.5 104 5 3600 184TC 575 GP100A 1LE21211CA313EA3 895 GPA2 4.8 88.5 67 5 1800 184TC 575 GP100A 1LE21211CB313EA3 828 GPA2 5.2 89.5 74 5 1200 215TC 575 GP100A 1LE21212AC213EA3 1379 GPA2 5.4 89.5 116 7.5 3600 213TC 575 GP100A 1LE21212AA113EA3 1134 GPA2 7.0 89.5 100 7.5 1800 213TC 575 GP100A 1LE21212AB113EA3 1103 GPA2 7.8 91.7 130 7.5 1200 254TC 575 GP100A 1LE21212BC113EA3 1772 GPA2 8.0 91.0 200 10 3600 215TC 575 GP100A 1LE21212AA213EA3 1312 GPA2 9.2 90.2 113 10 1800 215TC 575 GP100A 1LE21212AB213EA3 1312 GPA2 10.0 91.7 136 10 1200 256TC 575 GP100A 1LE21212BC213EA3 2054 GPA2 11.0 91.0 196 15 3600 254TC 575 GP100A 1LE21212BA113EA3 1723 GPA2 14.0 91.0 196 15 1800 254TC 575 GP100A 1LE21212BB113EA3 1686 GPA2 15.0 92.4 198 20 3600 256TC 575 GP100A 1LE21212BA213EA3 2089 GPA2 18.0 91.0 231 20 1800 256TC 575 GP100A 1LE21212BB213EA3 1993 GPA2 20.0 93.0 229 Options Selection and Pricing GP100A 575 Special Features Detail 575 143TC Definite Purpose Motors 145TC 3600 Hazardous Duty Motors 1200 Severe Duty Motors 1 1.5 Stock General Purpose Motors GP100A (Aluminum frame) Introduction SIMOTICS General purpose motors Typical Performance Data General Dimensions Stock availability subject to change. Prices and Specifications are subject to change without notice. DOE#CC 032A 2014 Low Voltage AC Motors Selection and Pricing Guide 2-7 Part Number Index NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. SIMOTICS General purpose motors GP100A (Aluminum frame) NEMA Premium® Die cast aluminum rotor 575V 60Hz – C-face Footless HP RPM Frame Voltage Type Part Number List price $ Multi. Symb. FL amps FL Nom Eff. (%) Lbs 1 3600 143TC 575 GP100A 1LE21211AA113GA3 519 GPA2 1.4 82.5 29 1 1800 143TC 575 GP100A 1LE21211AB213GA3 519 GPA2 1.4 85.5 41 1 1200 145TC 575 GP100A 1LE21211AC313GA3 623 GPA2 1.6 82.5 45 1.5 3600 143TC 575 GP100A 1LE21211AA213GA3 530 GPA2 2.0 84.0 35 1.5 1800 145TC 575 GP100A 1LE21211AB313GA3 561 GPA2 2.1 86.5 47 1.5 1200 182TC 575 GP100A 1LE21211CC113GA3 702 GPA2 2.4 87.5 63 2 3600 145TC 575 GP100A 1LE21211AA313GA3 601 GPA2 2.5 85.5 38 2 1800 145TC 575 GP100A 1LE21211AB413GA3 603 GPA2 2.8 86.5 46 2 1200 184TC 575 GP100A 1LE21211CC313GA3 761 GPA2 3.2 88.5 72 3 3600 182TC 575 GP100A 1LE21211CA113GA3 702 GPA2 3.8 86.5 57 3 1800 182TC 575 GP100A 1LE21211CB113GA3 722 GPA2 4.0 89.5 68 3 1200 213TC 575 GP100A 1LE21212AC113GA3 941 GPA2 4.3 89.5 104 5 3600 184TC 575 GP100A 1LE21211CA313GA3 873 GPA2 6.0 88.5 67 5 1800 184TC 575 GP100A 1LE21211CB313GA3 803 GPA2 6.5 89.5 74 5 1200 215TC 575 GP100A 1LE21212AC213GA3 1339 GPA2 6.7 89.5 116 7.5 3600 213TC 575 GP100A 1LE21212AA113GA3 1101 GPA2 8.8 89.5 100 7.5 1800 213TC 575 GP100A 1LE21212AB113GA3 1071 GPA2 9.7 91.7 130 7.5 1200 254TC 575 GP100A 1LE21212BC113GA3 1720 GPA2 10.0 91.0 200 10 3600 215TC 575 GP100A 1LE21212AA213GA3 1274 GPA2 11.5 90.2 113 10 1800 215TC 575 GP100A 1LE21212AB213GA3 1274 GPA2 12.5 91.7 136 10 1200 256TC 575 GP100A 1LE21212BC213GA3 1994 GPA2 13.5 91.0 196 15 3600 254TC 575 GP100A 1LE21212BA113GA3 1673 GPA2 17.5 91.0 196 15 1800 254TC 575 GP100A 1LE21212BB113GA3 1637 GPA2 19.0 92.4 198 20 3600 256TC 575 GP100A 1LE21212BA213GA3 2028 GPA2 22.5 91.0 231 20 1800 256TC 575 GP100A 1LE21212BB213GA3 1953 GPA2 25.0 93.0 229 NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. 2-8 2014 Low Voltage AC Motors Selection and Pricing Guide Stock Stock availability subject to change. Prices and Specifications are subject to change without notice. DOE#CC 032A Introduction SIMOTICS General purpose motors GP100 (Cast iron frame) General Purpose Motors ® C US MONTH ee HP Range Severe Duty Motors GP100 general purpose TEFC motors are available in two configurations which exceed NEMA Premium® efficiency with our exclusive, leading-edge, die cast copper rotor design (143T-256T) or meet NEMA Premium® efficiency with our die cast aluminum rotor design (143T-449T). Either way, these motors significantly reduce operating costs and pay for themselves in a short time through energy savings. These industry workhorses are ideal for use in material handling, pump, fan, compressor and other industrial applications. WARRANTY NEMA Premium ® Plus NEMA Premium ® 143T-256T 143T-449T 3 phase 60Hz 1-20HP or up to 256T frame 15-75HP or up to 365T frame 100-200 HP 1-200HP NEMA design B NEMA MG1 Part 31 1.15 Efficiency Voltage 1) 208-230 / 460 V 230 / 460 V 460 V 575V Insulation Insulation Class F Service Factor @ 40ºC Temperature rise (Sine wave) Stator Rotor, die cast copper Rotor die cast aluminum Random wound copper 143T-256T 143T-449T Die cast aluminum Steel Cast iron 2) O-ring Oversized 143T-256T 280T-400T 440T 143T-256T Double shielded Bearing housing Grease Inlet / relief fittings 143T-449T Cast iron Polyurea base Alemite / plug -FS440 (only) Cover Bidirectional fan Plastic -143T-256T 143T-449T Nameplate Lifting eyebolt Paint Rust resistant Zinc plated Aluminum engraved Included above 75 Lbs. Alkyd Modified - RAL7030 Variable torque 20:1 Constant torque 10:1 Constant torque 4:1 143T-256T Copper Rotor 143T-256T Aluminum rotor 143T-449T Frame Stator/Windings Rotor Options Selection and Pricing Conduit box Bearings Typical Performance Data Fan Hardware Special Features Detail 8 hole feet Condensation drains High strength carbon steel Shaft V ring slinger - IP54 Class B @ 1.0SF Class F @ 1.15SF Die Cast Aluminum Casted Drain holes Two on lowest point in frame C1045 DE only Definite Purpose Motors 1-200 HP 143T-449T Hazardous Duty Motors Frame Size Polypropylene Inverter Duty General Dimensions Warranty 18 months N/A Hazrdous classification Service factor 1.0 Service factor 1.15 2014 Low Voltage AC Motors Selection and Pricing Guide 2-9 Part Number Index NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. 1) Standard voltage for stock items, see option selection and pricing section for aditional voltages. 2) Available as an option for frames 284T-405T. SIMOTICS General purpose motors GP100 (Cast iron frame) NEMA Premium® Die cast aluminum rotor 460V 60Hz – Foot mounted HP RPM Frame Voltage Type Part Number List Price $ Mult. Symb. FL Amps FL Nom Eff. (%) Lbs 1 3600 143T 208-230/460 GP100 1LE22211AA114AA3 454 GP2 1.4 82.5 60 1 1800 143T 208-230/460 GP100 1LE22211AB214AA3 454 GP2 1.4 85.5 62 1 1200 145T 208-230/460 GP100 1LE22211AC314AA3 563 GP2 1.6 82.5 64 1 900 182T 208-230/460 GP100 1LE22211CD114AA3 682 GP2 2.1 74.0 86 1.5 3600 143T 208-230/460 GP100 1LE22211AA214AA3 466 GP2 2.0 84.0 56 1.5 1800 145T 208-230/460 GP100 1LE22211AB314AA3 500 GP2 2.1 86.5 66 1.5 1200 182T 208-230/460 GP100 1LE22211CC114AA3 602 GP2 2.4 87.5 93 1.5 900 184T 208-230/460 GP100 1LE22211CD314AA3 741 GP2 3.0 77.0 99 2 3600 145T 208-230/460 GP100 1LE22211AA314AA3 540 GP2 2.5 85.5 59 2 1800 145T 208-230/460 GP100 1LE22211AB414AA3 542 GP2 2.8 86.5 66 2 1200 184T 208-230/460 GP100 1LE22211CC314AA3 666 GP2 3.2 88.5 102 2 900 213T 208-230/460 GP100 1LE22212AD114AA3 852 GP2 3.3 82.5 123 3 3600 182T 208-230/460 GP100 1LE22211CA114AA3 602 GP2 3.8 86.5 87 3 1800 182T 208-230/460 GP100 1LE22211CB114AA3 623 GP2 4.0 89.5 98 3 1200 213T 208-230/460 GP100 1LE22212AC114AA3 857 GP2 4.3 89.5 144 3 900 215T 208-230/460 GP100 1LE22212AD214AA3 1222 GP2 4.8 84.0 138 5 3600 184T 208-230/460 GP100 1LE22211CA314AA3 784 GP2 6.0 88.5 98 5 1800 184T 208-230/460 GP100 1LE22211CB314AA3 709 GP2 6.5 89.5 104 5 1200 215T 208-230/460 GP100 1LE22212AC214AA3 1277 GP2 6.7 89.5 156 5 900 254T 208-230/460 GP100 1LE22212BD114AA3 1774 GP2 8.8 85.5 218 7.5 3600 213T 208-230/460 GP100 1LE22212AA114AA3 1025 GP2 8.8 89.5 148 7.5 1800 213T 208-230/460 GP100 1LE22212AB114AA3 994 GP2 9.7 91.7 171 7.5 1200 254T 208-230/460 GP100 1LE22212BC114AA3 1630 GP2 10.0 91.0 262 7.5 900 256T 208-230/460 GP100 1LE22212BD214AA3 1787 GP2 13.0 85.5 250 10 3600 215T 208-230/460 GP100 1LE22212AA214AA3 1209 GP2 11.5 90.2 163 10 1800 215T 208-230/460 GP100 1LE22212AB214AA3 1209 GP2 12.5 91.7 177 10 1200 256T 208-230/460 GP100 1LE22212BC214AA3 1918 GP2 13.5 91.0 259 10 900 284T 230/460 GP100 1LE22212CD116AA3 2569 GP2 17.0 90.2 414 15 3600 254T 208-230/460 GP100 1LE22212BA114AA3 1581 GP2 17.5 91.0 258 15 1800 254T 208-230/460 GP100 1LE22212BB114AA3 1542 GP2 19.0 92.4 259 15 1200 284T 230/460 GP100 1LE22212CC116AA3 2510 GP2 21.0 91.7 409 15 900 286T 230/460 GP100 1LE22212CD216AA3 3051 GP2 23.0 91.0 459 20 3600 256T 208-230/460 GP100 1LE22212BA214AA3 1955 GP2 22.5 91.0 293 20 1800 256T 208-230/460 GP100 1LE22212BB214AA3 1857 GP2 25.0 93.0 292 20 1200 286T 230/460 GP100 1LE22212CC216AA3 2956 GP2 27.0 91.7 434 20 900 324T 230/460 GP100 1LE22213AD116AA3 3664 GP2 32.0 91.0 616 25 3600 284TS 230/460 GP100 1LE22212DA116AA3 2268 GP2 29.0 91.7 454 25 1800 284T 230/460 GP100 1LE22212CB116AA3 2164 GP2 30.0 93.6 429 25 1200 324T 230/460 GP100 1LE22213AC116AA3 3565 GP2 33.0 93.0 633 25 900 326T 230/460 GP100 1LE22213AD216AA3 4242 GP2 40.0 91.0 663 30 3600 286TS 230/460 GP100 1LE22212DA216AA3 2751 GP2 34.0 91.7 424 30 1800 286T 230/460 GP100 1LE22212CB216AA3 2616 GP2 35.0 93.6 449 30 1200 326T 230/460 GP100 1LE22213AC216AA3 4387 GP2 39.0 93.0 658 30 900 364T 230/460 GP100 1LE22213CD116AA3 5449 GP2 47.0 91.7 854 NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. 2-10 2014 Low Voltage AC Motors Selection and Pricing Guide Stock availability subject to change. Prices and Specifications are subject to change without notice. DOE#CC 032A Stock GP100 (Cast iron frame) 460V 60Hz – Foot mounted HP RPM Frame Voltage Type Part Number List Price $ Mult. Symb. FL Amps FL Nom Eff. (%) Lbs 40 3600 324TS 230/460 GP100 1LE22213BA116AA3 3679 GP2 45.0 93.6 608 40 1800 324T 230/460 GP100 1LE22213AB116AA3 3522 GP2 46.0 94.1 633 40 1200 364T 230/460 GP100 1LE22213CC116AA3 6032 GP2 49.0 94.1 828 900 365T 230/460 GP100 1LE22213CD216AA3 6436 GP2 63.0 91.7 950 3600 326TS 230/460 GP100 1LE22213BA216AA3 4871 GP2 55.0 93.6 593 1800 326T 230/460 GP100 1LE22213AB216AA3 4428 GP2 58.0 94.5 668 1200 365T 230/460 GP100 1LE22213CC216AA3 7088 GP2 62.0 94.1 863 60 3600 364TS 230/460 GP100 1LE22213DA116AA3 5675 GP2 68.0 93.6 780 60 1800 364T 230/460 GP100 1LE22213CB116AA3 5625 GP2 68.0 95.0 880 1047 60 1200 404T 230/460 GP100 1LE22214AC116AA3 7354 GP2 74.0 94.5 75 3600 365TS 230/460 GP100 1LE22213DA216AA3 7091 GP2 86.0 94.1 888 75 1800 365T 230/460 GP100 1LE22213CB216AA3 7096 GP2 85.0 95.4 950 75 1200 405T 230/460 GP100 1LE22214AC216AA3 8615 GP2 93.0 94.5 1117 100 3600 405TS 460 GP100 1LE22214BA212AA3 10347 GP2 108.0 94.1 1012 100 1800 405T 460 GP100 1LE22214AB212AA3 9547 GP2 113.0 95.4 1107 100 1800 405TS 460 GP100 1LE22214BB212AA3 9547 GP2 113.0 95.4 1107 1200 444T 460 GP100 1LE22214CC112AA3 13429 GP2 117.0 95.0 1531 1200 444TS 460 GP100 1LE22214DC112AA3 12821 GP2 117.0 95.0 1467 125 3600 444TS 460 GP100 1LE22214DA112AA3 12831 GP2 138.0 95.0 1381 125 1800 444T 460 GP100 1LE22214CB112AA3 12532 GP2 143.0 95.4 1590 125 1800 444T 460 GP100 1LE22214EB112AA3 11924 GP2 143.0 95.4 1552 125 1800 444TS 460 GP100 1LE22214DB112AA3 11924 GP2 143.0 95.4 1552 1200 445T 460 GP100 1LE22214CC212AA3 15550 GP2 144.0 95.0 1702 1200 445T 460 GP100 1LE22214EC212AA3 14942 GP2 144.0 95.0 1664 125 1200 445TS 460 GP100 1LE22214DC212AA3 14942 GP2 115.0 95.0 1647 150 3600 445TS 460 GP100 1LE22214DA212AA3 15967 GP2 131.0 95.0 1542 1800 445T 460 GP100 1LE22214CB212AA3 14967 GP2 170.0 95.8 1865 1800 445T 460 GP100 1LE22214EB212AA3 14359 GP2 170.0 95.8 1827 150 1800 445TS 460 GP100 1LE22214DB212AA3 14359 GP2 136.0 95.8 1637 150 1200 447T 460 GP100 1LE22214CC312AA3 17925 GP2 172.0 95.8 1960 150 1200 447T 460 GP100 1LE22214EC312AA3 17317 GP2 172.0 95.8 1922 150 1200 447TS 460 GP100 1LE22214DC312AA3 17317 GP2 138.0 95.8 1897 200 3600 447TS 460 GP100 1LE22214DA312AA3 22239 GP2 173.0 95.4 2182 200 1800 447T 460 GP100 1LE22214CB312AA3 19838 GP2 228.0 96.2 2245 200 1800 447T 460 GP100 1LE22214EB312AA3 19230 GP2 228.0 96.2 2207 200 1800 447TS 460 GP100 1LE22214DB312AA3 19230 GP2 182.0 96.2 2182 1200 449T 460 GP100 1LE22214CC512AA3 23948 GP2 227.0 95.8 2301 1200 449T 460 GP100 1LE22214EC512AA3 23340 GP2 227.0 95.8 2263 200 1200 449TS 460 GP100 1LE22214DC512AA3 23340 GP2 182.0 95.8 2240 Typical Performance Data 200 200 Options Selection and Pricing 150 150 Special Features Detail 125 125 Definite Purpose Motors 100 100 Hazardous Duty Motors 50 50 Severe Duty Motors 40 50 Stock General Purpose Motors NEMA Premium® Die cast aluminum rotor Introduction SIMOTICS General purpose motors General Dimensions Stock availability subject to change. 900 RPM Motors meet or exceed EPAct efficiency. Prices and Specifications are subject to change without notice. DOE#CC 032A 2014 Low Voltage AC Motors Selection and Pricing Guide 2-11 Part Number Index NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. Shaded ratings indicated roller bearings. SIMOTICS General purpose motors GP100 (Cast iron frame) NEMA Premium® Die cast aluminum rotor 460V 60Hz – C-face foot mounted HP RPM Frame Voltage Type Part Number List Price $ Mult. Symb. FL Amps FL Nom. Eff.(%) Lbs 1 3600 143TC 208-230/460 GP100 1LE22211AA114EA3 560 GP2 1.4 82.5 60 1 1800 143TC 208-230/460 GP100 1LE22211AB214EA3 560 GP2 1.4 85.5 62 1 1200 145TC 208-230/460 GP100 1LE22211AC314EA3 673 GP2 1.6 82.5 64 1 900 182TC 208-230/460 GP100 1LE22211CD114EA3 838 GP2 2.1 74.0 86 1.5 3600 143TC 208-230/460 GP100 1LE22211AA214EA3 573 GP2 2.0 84.0 56 1.5 1800 145TC 208-230/460 GP100 1LE22211AB314EA3 608 GP2 2.1 86.5 66 1.5 1200 182TC 208-230/460 GP100 1LE22211CC114EA3 756 GP2 2.4 87.5 93 1.5 900 184TC 208-230/460 GP100 1LE22211CD314EA3 899 GP2 3.0 77.0 99 2 3600 145TC 208-230/460 GP100 1LE22211AA314EA3 649 GP2 2.5 85.5 59 2 1800 145TC 208-230/460 GP100 1LE22211AB414EA3 651 GP2 2.8 86.5 66 2 1200 184TC 208-230/460 GP100 1LE22211CC314EA3 822 GP2 3.2 88.5 102 2 900 213TC 208-230/460 GP100 1LE22212AD114EA3 1014 GP2 3.3 82.5 123 3 3600 182TC 208-230/460 GP100 1LE22211CA114EA3 756 GP2 3.8 86.5 87 3 1800 182TC 208-230/460 GP100 1LE22211CB114EA3 778 GP2 4.0 89.5 98 3 1200 213TC 208-230/460 GP100 1LE22212AC114EA3 1019 GP2 4.3 89.5 144 138 3 900 215TC 208-230/460 GP100 1LE22212AD214EA3 1395 GP2 4.8 84.0 5 3600 184TC 208-230/460 GP100 1LE22211CA314EA3 943 GP2 6.0 88.5 98 5 1800 184TC 208-230/460 GP100 1LE22211CB314EA3 866 GP2 6.5 89.5 104 5 1200 215TC 208-230/460 GP100 1LE22212AC214EA3 1451 GP2 6.7 89.5 156 5 900 254TC 208-230/460 GP100 1LE22212BD114EA3 2013 GP2 8.8 85.5 218 7.5 3600 213TC 208-230/460 GP100 1LE22212AA114EA3 1192 GP2 8.8 89.5 148 7.5 1800 213TC 208-230/460 GP100 1LE22212AB114EA3 1160 GP2 9.7 91.7 171 7.5 1200 254TC 208-230/460 GP100 1LE22212BC114EA3 1864 GP2 10.0 91.0 262 7.5 900 256TC 208-230/460 GP100 1LE22212BD214EA3 2026 GP2 13.0 85.5 250 10 3600 215TC 208-230/460 GP100 1LE22212AA214EA3 1381 GP2 11.5 90.2 163 10 1800 215TC 208-230/460 GP100 1LE22212AB214EA3 1381 GP2 12.5 91.7 177 10 1200 256TC 208-230/460 GP100 1LE22212BC214EA3 2161 GP2 13.5 91.0 259 15 3600 254TC 208-230/460 GP100 1LE22212BA114EA3 1814 GP2 17.5 91.0 258 15 1800 254TC 208-230/460 GP100 1LE22212BB114EA3 1774 GP2 19.0 92.4 259 20 3600 256TC 208-230/460 GP100 1LE22212BA214EA3 2199 GP2 22.5 91.0 293 20 1800 256TC 208-230/460 GP100 1LE22212BB214EA3 2098 GP2 25.0 93.0 292 NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. 2-12 2014 Low Voltage AC Motors Selection and Pricing Guide Stock Stock availability subject to change. Prices and Specifications are subject to change without notice. DOE#CC 032A 460V 60Hz – C-face footless Part Number List Price $ Mult. Symb. FL Amps FL Nom Eff. (%) Lbs 1 3600 143TC 208-230/460 GP100 1LE22211AA114GA3 544 GP2 1.4 82.5 60 1 1800 143TC 208-230/460 GP100 1LE22211AB214GA3 544 GP2 1.4 85.5 62 1 1200 145TC 208-230/460 GP100 1LE22211AC314GA3 653 GP2 1.6 82.5 64 1 900 182TC 208-230/460 GP100 1LE22211CD114GA3 814 GP2 2.1 74.0 86 1.5 3600 143TC 208-230/460 GP100 1LE22211AA214GA3 556 GP2 2.0 84.0 56 1.5 1800 145TC 208-230/460 GP100 1LE22211AB314GA3 590 GP2 2.1 86.5 66 1.5 1200 182TC 208-230/460 GP100 1LE22211CC114GA3 734 GP2 2.4 87.5 93 1.5 900 184TC 208-230/460 GP100 1LE22211CD314GA3 873 GP2 3.0 77.0 99 2 3600 145TC 208-230/460 GP100 1LE22211AA314GA3 630 GP2 2.5 85.5 59 2 1800 145TC 208-230/460 GP100 1LE22211AB414GA3 632 GP2 2.8 86.5 66 2 1200 184TC 208-230/460 GP100 1LE22211CC314GA3 798 GP2 3.2 88.5 102 2 900 213TC 208-230/460 GP100 1LE22212AD114GA3 984 GP2 3.3 82.5 123 3 3600 182TC 208-230/460 GP100 1LE22211CA114GA3 734 GP2 3.8 86.5 87 3 1800 182TC 208-230/460 GP100 1LE22211CB114GA3 755 GP2 4.0 89.5 98 3 1200 213TC 208-230/460 GP100 1LE22212AC114GA3 989 GP2 4.3 89.5 144 3 900 215TC 208-230/460 GP100 1LE22212AD214GA3 1354 GP2 4.8 84.0 138 5 3600 184TC 208-230/460 GP100 1LE22211CA314GA3 916 GP2 6.0 88.5 98 5 1800 184TC 208-230/460 GP100 1LE22211CB314GA3 841 GP2 6.5 89.5 104 5 1200 215TC 208-230/460 GP100 1LE22212AC214GA3 1409 GP2 6.7 89.5 156 5 900 254TC 208-230/460 GP100 1LE22212BD114GA3 1954 GP2 8.8 85.5 218 7.5 3600 213TC 208-230/460 GP100 1LE22212AA114GA3 1157 GP2 8.8 89.5 148 7.5 1800 213TC 208-230/460 GP100 1LE22212AB114GA3 1126 GP2 9.7 91.7 171 7.5 1200 254TC 208-230/460 GP100 1LE22212BC114GA3 1810 GP2 10.0 91.0 262 7.5 900 256TC 208-230/460 GP100 1LE22212BD214GA3 1967 GP2 13.0 85.5 250 10 3600 215TC 208-230/460 GP100 1LE22212AA214GA3 1341 GP2 11.5 90.2 163 10 1800 215TC 208-230/460 GP100 1LE22212AB214GA3 1341 GP2 12.5 91.7 177 10 1200 256TC 208-230/460 GP100 1LE22212BC214GA3 2098 GP2 13.5 91.0 259 15 3600 254TC 208-230/460 GP100 1LE22212BA114GA3 1761 GP2 17.5 91.0 258 15 1800 254TC 208-230/460 GP100 1LE22212BB114GA3 1722 GP2 19.0 92.4 259 20 3600 256TC 208-230/460 GP100 1LE22212BA214GA3 2135 GP2 22.5 91.0 293 20 1800 256TC 208-230/460 GP100 1LE22212BB214GA3 2037 GP2 25.0 93.0 292 Stock Options Selection and Pricing Type Special Features Detail Voltage Definite Purpose Motors Frame Hazardous Duty Motors RPM Severe Duty Motors HP General Purpose Motors GP100 (Cast iron frame) NEMA Premium® Die cast aluminum rotor Introduction SIMOTICS General purpose motors Typical Performance Data General Dimensions Stock availability subject to change. Prices and Specifications are subject to change without notice. DOE#CC 032A 2014 Low Voltage AC Motors Selection and Pricing Guide 2-13 Part Number Index NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. SIMOTICS General purpose motors GP100 (Cast iron frame) NEMA Premium® Die cast copper rotor 460V 60Hz – Foot mounted HP RPM Frame Voltage Type Part Number List Price $ Mult. Symb. FL Amps FL Nom Eff. (%) Lbs 1 1800 143T 208-230/460 GP100 1LE22111AB214AA3 505 GP2 1.5 86.5 67 1 1200 145T 208-230/460 GP100 1LE22111AC314AA3 628 GP2 1.6 84.0 67 1.5 3600 143T 208-230/460 GP100 1LE22111AA214AA3 519 GP2 1.9 87.5 65 1.5 1800 145T 208-230/460 GP100 1LE22111AB314AA3 556 GP2 2.1 87.5 67 2.0 3600 145T 208-230/460 GP100 1LE22111AA314AA3 602 GP2 2.6 88.5 66 2 1800 145T 208-230/460 GP100 1LE22111AB414AA3 604 GP2 2.8 87.5 68 3 3600 182T 208-230/460 GP100 1LE22111CA114AA3 672 GP2 3.8 89.5 101 3 1800 182T 208-230/460 GP100 1LE22111CB114AA3 695 GP2 4.0 90.2 105 3 1200 213T 208-230/460 GP100 1LE22112AC114AA3 955 GP2 4.3 90.2 150 5 3600 184T 208-230/460 GP100 1LE22111CA314AA3 874 GP2 6.2 90.2 103 5 1800 184T 208-230/460 GP100 1LE22111CB314AA3 791 GP2 6.7 90.2 109 163 5 1200 215T 208-230/460 GP100 1LE22112AC214AA3 1423 GP2 7.0 90.2 7.5 3600 213T 208-230/460 GP100 1LE22112AA114AA3 1143 GP2 8.5 91.7 178 7.5 1800 213T 208-230/460 GP100 1LE22112AB114AA3 1107 GP2 9.5 92.4 178 7.5 1200 254T 208-230/460 GP100 1LE22112BC114AA3 1908 GP2 10.5 92.4 307 10 3600 215T 208-230/460 GP100 1LE22112AA214AA3 1347 GP2 11.5 91.7 185 10.0 1800 215T 208-230/460 GP100 1LE22112AB214AA3 1348 GP2 12.5 92.4 185 10 1200 256T 208-230/460 GP100 1LE22112BC214AA3 2244 GP2 13.5 92.4 307 15 3600 254T 208-230/460 GP100 1LE22112BA114AA3 1849 GP2 17.0 92.4 279 15 1800 254T 208-230/460 GP100 1LE22112BB114AA3 1804 GP2 19.0 93.0 268 20 3600 256T 208-230/460 GP100 1LE22112BA214AA3 2288 GP2 22.5 92.4 303 20 1800 256T 208-230/460 GP100 1LE22112BB214AA3 2172 GP2 25.0 93.6 311 2-14 2014 Low Voltage AC Motors Selection and Pricing Guide Stock GP100 (Cast iron frame) 460V 60Hz – C-face footless Mult. Symb. FL Amps FL Nom Eff. (%) Lbs GP100 1LE22111AB214GA3 595 GP2 1.5 86.5 67 GP100 1LE22111AC314GA3 718 GP2 1.6 84.0 67 208-230/460 GP100 1LE22111AA214GA3 609 GP2 1.9 87.5 65 145TC 208-230/460 GP100 1LE22111AB314GA3 646 GP2 2.1 87.5 67 145TC 208-230/460 GP100 1LE22111AA314GA3 692 GP2 2.6 88.5 66 1800 145TC 208-230/460 GP100 1LE22111AB414GA3 694 GP2 2.8 87.5 68 3600 182TC 208-230/460 GP100 1LE22111CA114GA3 804 GP2 3.8 89.5 101 3 1800 182TC 208-230/460 GP100 1LE22111CB114GA3 827 GP2 4.0 90.2 105 3 1200 213TC 208-230/460 GP100 1LE22112AC114GA3 1087 GP2 4.3 90.2 150 Frame Voltage Type 1 1800 143TC 208-230/460 1 1200 145TC 208-230/460 1.5 3600 143TC 1.5 1800 2 3600 2 3 5 3600 184TC 208-230/460 GP100 1LE22111CA314GA3 1006 GP2 6.2 90.2 103 5.0 1800 184TC 208-230/460 GP100 1LE22111CB314GA3 923 GP2 6.7 90.2 109 1200 215TC 208-230/460 GP100 1LE22112AC214GA3 1555 GP2 7.0 90.2 163 3600 213TC 208-230/460 GP100 1LE22112AA114GA3 1275 GP2 8.5 91.7 178 7.5 1800 213TC 208-230/460 GP100 1LE22112AB114GA3 1239 GP2 9.5 92.4 178 7.5 1200 254TC 208-230/460 GP100 1LE22112BC114GA3 2088 GP2 10.5 92.4 307 10 3600 215TC 208-230/460 GP100 1LE22112AA214GA3 1479 GP2 11.5 91.7 185 10 1800 215TC 208-230/460 GP100 1LE22112AB214GA3 1480 GP2 12.5 92.4 185 10 1200 256TC 208-230/460 GP100 1LE22112BC214GA3 2424 GP2 13.5 92.4 307 15 3600 254TC 208-230/460 GP100 1LE22112BA114GA3 2029 GP2 17.0 92.4 279 15 1800 254TC 208-230/460 GP100 1LE22112BB114GA3 1984 GP2 19.0 93.0 268 20 3600 256TC 208-230/460 GP100 1LE22112BA214GA3 2468 GP2 22.5 92.4 303 20 1800 256TC 208-230/460 GP100 1LE22112BB214GA3 2352 GP2 25.0 93.6 311 Definite Special Special Purpose Motors Features Detail Features Detail 5 7.5 Stock Hazardous Duty Motors List Price $ RPM Severe Duty Motors Part Number HP General Purpose Motors NEMA Premium® Die cast copper rotor Introduction Introduction SIMOTICS General purpose motors Options Selection and Pricing Typical Performance Data General Dimensions Stock availability subject to change. Prices and Specifications are subject to change without notice. DOE#CC 032A 2014 Low Voltage AC Motors Selection and Pricing Guide 2-15 Part Number Index NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. SIMOTICS General purpose motors GP100 (Cast iron frame) NEMA Premium® Die cast aluminum rotor 575V 60Hz – Foot mounted HP RPM Frame Voltage Type Part Number List Price $ Mult. Symb. FL Amps FL Nom Eff. (%) Lbs 1 3600 143T 575 GP100 1LE22211AA113AA3 454 GP2 1.1 82.5 60 1 1800 143T 575 GP100 1LE22211AB213AA3 454 GP2 1.1 85.5 62 1 1200 145T 575 GP100 1LE22211AC313AA3 563 GP2 1.3 82.5 64 86 1 900 182T 575 GP100 1LE22211CD113AA3 682 GP2 2.1 74.0 1.5 3600 143T 575 GP100 1LE22211AA213AA3 466 GP2 1.6 84.0 56 1.5 1800 145T 575 GP100 1LE22211AB313AA3 500 GP2 1.7 86.5 66 1.5 1200 182T 575 GP100 1LE22211CC113AA3 602 GP2 1.9 87.5 93 1.5 900 184T 575 GP100 1LE22211CD313AA3 852 GP2 3.0 77.0 99 2 3600 145T 575 GP100 1LE22211AA313AA3 540 GP2 2.0 85.5 59 2 1800 145T 575 GP100 1LE22211AB413AA3 542 GP2 2.2 86.5 66 2 1200 184T 575 GP100 1LE22211CC313AA3 666 GP2 2.6 88.5 102 2 900 213T 575 GP100 1LE22212AD113AA3 852 GP2 3.3 82.5 123 3 3600 182T 575 GP100 1LE22211CA113AA3 602 GP2 3.0 86.5 87 3 1800 182T 575 GP100 1LE22211CB113AA3 623 GP2 3.2 89.5 98 3 1200 213T 575 GP100 1LE22212AC113AA3 857 GP2 3.4 89.5 144 3 900 215T 575 GP100 1LE22212AD213AA3 1222 GP2 4.8 84.0 138 5 3600 184T 575 GP100 1LE22211CA313AA3 784 GP2 4.8 88.5 98 5 1800 184T 575 GP100 1LE22211CB313AA3 709 GP2 5.2 89.5 104 5 1200 215T 575 GP100 1LE22212AC213AA3 1277 GP2 5.4 89.5 156 5 900 254T 575 GP100 1LE22212BD113AA3 1774 GP2 8.8 85.5 218 7.5 3600 213T 575 GP100 1LE22212AA113AA3 1025 GP2 7.0 89.5 148 7.5 1800 213T 575 GP100 1LE22212AB113AA3 994 GP2 7.8 91.7 171 7.5 1200 254T 575 GP100 1LE22212BC113AA3 1630 GP2 8.0 91.0 262 7.5 900 256T 575 GP100 1LE22212BD213AA3 1787 GP2 13.0 85.0 250 10 3600 215T 575 GP100 1LE22212AA213AA3 1209 GP2 9.2 90.2 163 10 1800 215T 575 GP100 1LE22212AB213AA3 1209 GP2 10.0 91.7 177 10 1200 256T 575 GP100 1LE22212BC213AA3 1918 GP2 11.0 91.0 259 10 900 284T 575 GP100 1LE22212CD113AA3 2569 GP2 14.0 90.2 414 15 3600 254T 575 GP100 1LE22212BA113AA3 1581 GP2 14.0 91.0 258 15 1800 254T 575 GP100 1LE22212BB113AA3 1542 GP2 15.0 92.4 259 15 1200 284T 575 GP100 1LE22212CC113AA3 2510 GP2 17.0 91.7 409 15 900 286T 575 GP100 1LE22212CD213AA3 3051 GP2 18.5 91.0 459 20 3600 256T 575 GP100 1LE22212BA213AA3 1955 GP2 18.0 91.0 293 20 1800 256T 575 GP100 1LE22212BB213AA3 1857 GP2 20.0 93.0 292 20 1200 286T 575 GP100 1LE22212CC213AA3 2956 GP2 21.5 91.7 434 20 900 324T 575 GP100 1LE22213AD113AA3 3664 GP2 25.0 91.0 616 25 3600 284TS 575 GP100 1LE22212DA113AA3 2268 GP2 23.0 91.7 454 25 1800 284T 575 GP100 1LE22212CB113AA3 2164 GP2 24.0 93.6 429 25 1200 324T 575 GP100 1LE22213AC113AA3 3565 GP2 26.0 93.0 633 25 900 326T 575 GP100 1LE22213AD213AA3 4242 GP2 32.0 91.0 663 30 3600 286TS 575 GP100 1LE22212DA213AA3 2751 GP2 27.0 91.7 424 30 1800 286T 575 GP100 1LE22212CB213AA3 2616 GP2 28.0 93.6 449 30 1200 326T 575 GP100 1LE22213AC213AA3 4387 GP2 31.0 93.0 658 30 900 364T 575 GP100 1LE22213CD113AA3 5449 GP2 37.5 91.0 854 NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. 2-16 2014 Low Voltage AC Motors Selection and Pricing Guide Stock Stock availability subject to change. Prices and Specifications are subject to change without notice. DOE#CC032A GP100 (Cast iron frame) 575V 60Hz – Foot mounted Frame Voltage Type Part Number List Price $ Mult. Symb. FL Amps FL Nom Eff. (%) Lbs 40 3600 324TS 575 GP100 1LE22213BA113AA3 3679 GP2 36.0 93.6 608 40 1800 324T 575 GP100 1LE22213AB113AA3 3522 GP2 37.0 94.1 633 40 1200 364T 575 GP100 1LE22213CC113AA3 6032 GP2 39.0 94.1 828 40 900 365T 575 GP100 1LE22213CD213AA3 6436 GP2 51.0 91.7 950 50 3600 326TS 575 GP100 1LE22213BA213AA3 4871 GP2 44.0 93.6 539 50 1800 326T 575 GP100 1LE22213AB213AA3 4428 GP2 46.0 94.5 668 50 1200 365T 575 GP100 1LE22213CC213AA3 7088 GP2 50.0 94.1 863 60 3600 364TS 575 GP100 1LE22213DA113AA3 5675 GP2 54.5 93.6 780 60 1800 364T 575 GP100 1LE22213CB113AA3 5625 GP2 54.5 95.0 880 60 1200 404T 575 GP100 1LE22214AC113AA3 7354 GP2 59.0 94.5 1047 75 3600 365TS 575 GP100 1LE22213DA213AA3 7091 GP2 69.0 94.1 888 75 1800 365T 575 GP100 1LE22213CB213AA3 7096 GP2 68.0 95.4 950 1200 405T 575 GP100 1LE22214AC213AA3 8615 GP2 75.0 94.5 1117 3600 405TS 575 GP100 1LE22214BA213AA3 10347 GP2 87.0 94.1 1012 100 1800 405T 575 GP100 1LE22214AB213AA3 9547 GP2 90.5 95.4 1107 100 1200 444T 575 GP100 1LE22214CC113AA3 13429 GP2 94.0 95.0 1531 125 3600 444TS 575 GP100 1LE22214DA113AA3 12831 GP2 110.0 95.0 1381 125 1800 444T 575 GP100 1LE22214CB113AA3 12532 GP2 115.0 95.4 1527 125 1800 444T 575 GP100 1LE22214EB113AA3 11924 GP2 115.0 95.4 1552 125 1800 444TS 575 GP100 1LE22214DB113AA3 11924 GP2 144.0 95.4 1527 1200 445T 575 GP100 1LE22214CC213AA3 15550 GP2 115.0 95.0 1702 1200 445T 575 GP100 1LE22214EC213AA3 14942 GP2 115.0 95.0 1664 1647 125 1200 445TS 575 GP100 1LE22214DC213AA3 14942 GP2 164.0 95.0 150 3600 445TS 575 GP100 1LE22214DA213AA3 15967 GP2 170.0 95.0 1542 150 1800 445T 575 GP100 1LE22214CB213AA3 14967 GP2 136.0 95.8 1865 1827 150 1800 445T 575 GP100 1LE22214EB213AA3 14359 GP2 136.0 95.8 150 1800 445TS 575 GP100 1LE22214DB213AA3 14359 GP2 172.0 95.8 1637 150 1200 447T 575 GP100 1LE22214CC313AA3 17317 GP2 138.0 95.8 1960 1200 447T 575 GP100 1LE22214EC313AA3 17317 GP2 138.0 95.8 1922 1200 447TS 575 GP100 1LE22214DC313AA3 17317 GP2 216.0 95.8 1867 200 3600 447TS 575 GP100 1LE22214DA313AA3 22239 GP2 228.0 95.4 2182 200 1800 447T 575 GP100 1LE22214CB313AA3 19838 GP2 182.0 96.2 2245 200 1800 447T 575 GP100 1LE22214EB313AA3 19230 GP2 182.0 96.2 2207 200 1800 447TS 575 GP100 1LE22214DB313AA3 19230 GP2 227.0 96.2 2182 1200 449T 575 GP100 1LE22214CC513AA3 23948 GP2 182.0 95.8 2301 1200 449T 575 GP100 1LE22214EC513AA3 23340 GP2 182.0 95.8 2263 200 1200 449TS 575 GP100 1LE22214DC513AA3 23340 GP2 182.0 95.8 2240 Typical Performance Data 200 200 Options Selection and Pricing 150 150 Special Features Detail 125 125 Definite Purpose Motors 75 100 Stock Hazardous Duty Motors RPM Severe Duty Motors HP General Purpose Motors NEMA Premium® Die cast aluminum rotor Introduction SIMOTICS General purpose motors General Dimensions 900 RPM Motors meet or exceed EPAct efficiency. Prices and Specifications are subject to change without notice. DOE#CC032A 2014 Low Voltage AC Motors Selection and Pricing Guide 2-17 Part Number Index NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. Stock availability subject to change. SIMOTICS General purpose motors GP100 (Cast iron frame) NEMA Premium® Die cast aluminum rotor 575V 60Hz – C-face foot mounted HP RPM Frame Voltage Type Part Number List Price $ Mult. Symb. FL Amps FL Nom Eff. (%) Lbs 1 3600 143TC 575 GP100 1LE22211AA113EA3 560 GP2 1.1 82.5 60 1 1800 143TC 575 GP100 1LE22211AB213EA3 560 GP2 1.1 85.5 62 1 1200 145TC 575 GP100 1LE22211AC313EA3 673 GP2 1.3 82.5 64 1 900 182TC 575 GP100 1LE22211CD113EA3 838 GP2 1.6 74.0 86 1.5 3600 143TC 575 GP100 1LE22211AA213EA3 573 GP2 1.6 84.0 56 1.5 1800 145TC 575 GP100 1LE22211AB313EA3 608 GP2 1.7 86.5 66 1.5 1200 182TC 575 GP100 1LE22211CC113EA3 756 GP2 1.9 87.5 93 1.5 900 184TC 575 GP100 1LE22211CD313EA3 899 GP2 2.4 77.0 99 2 3600 145TC 575 GP100 1LE22211AA313EA3 649 GP2 2.0 85.5 59 2 1800 145TC 575 GP100 1LE22211AB413EA3 651 GP2 2.2 86.5 66 2 1200 184TC 575 GP100 1LE22211CC313EA3 822 GP2 2.6 88.5 102 2 900 213TC 575 GP100 1LE22212AD113EA3 1014 GP2 2.6 82.5 123 3 3600 182TC 575 GP100 1LE22211CA113EA3 756 GP2 3.0 86.5 87 3 1800 182TC 575 GP100 1LE22211CB113EA3 778 GP2 3.2 89.5 98 3 1200 213TC 575 GP100 1LE22212AC113EA3 1019 GP2 3.4 89.5 144 3 900 215TC 575 GP100 1LE22212AD213EA3 1395 GP2 3.8 84.0 138 5 3600 184TC 575 GP100 1LE22211CA313EA3 943 GP2 4.8 88.5 98 5 1800 184TC 575 GP100 1LE22211CB313EA3 866 GP2 5.2 89.5 104 5 1200 215TC 575 GP100 1LE22212AC213EA3 1451 GP2 5.4 89.5 156 5 900 254TC 575 GP100 1LE22212BD113EA3 2013 GP2 7.0 85.5 218 7.5 3600 213TC 575 GP100 1LE22212AA113EA3 1192 GP2 7.0 89.5 148 7.5 1800 213TC 575 GP100 1LE22212AB113EA3 1160 GP2 7.8 91.7 171 7.5 1200 254TC 575 GP100 1LE22212BC113EA3 1864 GP2 8.0 91.0 262 7.5 900 256TC 575 GP100 1LE22212BD213EA3 2026 GP2 10.4 85.5 250 10 3600 215TC 575 GP100 1LE22212AA213EA3 1381 GP2 9.2 90.2 163 10 1800 215TC 575 GP100 1LE22212AB213EA3 1381 GP2 10.0 91.7 177 10 1200 256TC 575 GP100 1LE22212BC213EA3 2161 GP2 11.0 91.0 259 15 3600 254TC 575 GP100 1LE22212BA113EA3 1814 GP2 14.0 91.0 258 15 1800 254TC 575 GP100 1LE22212BB113EA3 1774 GP2 15.0 92.4 259 20 3600 256TC 575 GP100 1LE22212BA213EA3 2199 GP2 18.0 91.0 293 20 1800 256TC 575 GP100 1LE22212BB213EA3 2098 GP2 20.0 93.0 292 NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. 2-18 2014 Low Voltage AC Motors Selection and Pricing Guide Stock Stock availability subject to change. Prices and Specifications are subject to change without notice. DOE#CC032A GP100 (Cast iron frame) 575V 60Hz – C-face footless RPM Frame Voltage Type Part Number List Price $ Mult. Symb. FL Amps FL Nom Eff. (%) Lbs 1 3600 143TC 575 GP100 1LE22211AA113GA3 544 GP2 1.1 82.5 60 1 1800 143TC 575 GP100 1LE22211AB213GA3 544 GP2 1.1 85.5 62 1 1200 145TC 575 GP100 1LE22211AC313GA3 653 GP2 1.3 82.5 64 1 900 182TC 575 GP100 1LE22211CD113GA3 814 GP2 1.6 74.0 86 1.5 3600 143TC 575 GP100 1LE22211AA213GA3 556 GP2 1.6 84.0 56 575 GP100 1LE22211AB313GA3 590 GP2 1.7 86.5 66 575 GP100 1LE22211CC113GA3 734 GP2 1.9 87.5 93 1.5 900 184TC 575 GP100 1LE22211CD313GA3 873 GP2 2.4 77.0 99 2 3600 145TC 575 GP100 1LE22211AA313GA3 630 GP2 2.0 85.5 59 2 1800 145TC 575 GP100 1LE22211AB413GA3 632 GP2 2.2 86.5 66 2 1200 184TC 575 GP100 1LE22211CC313GA3 798 GP2 2.6 88.5 102 2 900 213TC 575 GP100 1LE22212AD113GA3 984 GP2 2.6 82.5 123 3 3600 182TC 575 GP100 1LE22211CA113GA3 734 GP2 3.0 86.5 87 3 1800 182TC 575 GP100 1LE22211CB113GA3 755 GP2 3.2 89.5 98 3 1200 213TC 575 GP100 1LE22212AC113GA3 989 GP2 3.4 89.5 144 3 900 215TC 575 GP100 1LE22212AD213GA3 1354 GP2 3.8 84.0 138 5 3600 184TC 575 GP100 1LE22211CA313GA3 916 GP2 4.8 88.5 98 5 1800 184TC 575 GP100 1LE22211CB313GA3 841 GP2 5.2 89.5 104 5 1200 215TC 575 GP100 1LE22212AC213GA3 1409 GP2 5.4 89.5 156 5 900 254TC 575 GP100 1LE22212BD113GA3 1954 GP2 7.0 85.5 218 213TC 575 GP100 1LE22212AA113GA3 1157 GP2 7.0 89.5 148 213TC 575 GP100 1LE22212AB113GA3 1126 GP2 7.8 91.7 171 7.5 1200 254TC 575 GP100 1LE22212BC113GA3 1810 GP2 8.0 91.0 262 7.5 900 256TC 575 GP100 1LE22212BD213GA3 1967 GP2 10.4 85.5 250 10 3600 215TC 575 GP100 1LE22212AA213GA3 1341 GP2 9.2 90.2 163 10 1800 215TC 575 GP100 1LE22212AB213GA3 1341 GP2 10.0 91.7 177 10 1200 256TC 575 GP100 1LE22212BC213GA3 2098 GP2 11.0 91.0 259 15 3600 254TC 575 GP100 1LE22212BA113GA3 1761 GP2 14.0 91.0 258 15 1800 254TC 575 GP100 1LE22212BB113GA3 1722 GP2 15.0 92.4 259 20 3600 256TC 575 GP100 1LE22212BA213GA3 2135 GP2 18.0 91.0 293 20 1800 256TC 575 GP100 1LE22212BB213GA3 2037 GP2 20.0 93.0 292 Typical Performance Data 3600 1800 Options Selection and Pricing 7.5 7.5 Special Features Detail 145TC 182TC Definite Purpose Motors 1800 1200 Hazardous Duty Motors 1.5 1.5 Stock Severe Duty Motors HP General Purpose Motors NEMA Premium® Die cast aluminum rotor Introduction SIMOTICS General purpose motors General Dimensions Stock availability subject to change. 900 RPM Motors meet or exceed EPAct efficiency. Prices and Specifications are subject to change without notice. DOE#CC032A 2014 Low Voltage AC Motors Selection and Pricing Guide 2-19 Part Number Index NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. Shaded ratings indicated roller bearings. Introduction SIMOTICS Severe duty motors SD100 (Cast iron frame) General Purpose Motors ® C US 3 YEAR ee HP range WARRANTY 1-400 HP 143T-S449 NEMA Premium ® Plus NEMA Premium ® 143T-256T 143T-S449 3 phase 60Hz 1-20HP 1-20HP 2) 15-400 HP 1-400HP NEMA design B 3) NEMA MG1 Part 31 1.15 Voltage 1) 208-230 / 460 V 230 / 460 V 460 V 575V Insulation Insulation Class F Service Factor @ 40ºC Temperature rise (Sine wave) Frame 8 hole feet Condensation drains High strength carbon steel Shaft V ring slinger - IP54 Inpro/Seal® Bearing Isolator - IP55 Class B @ 1.0SF Class F @ 1.15SF Cast iron Casted Drains C1045 DE & NDE 4) 143T-S449 Hazardous Duty Motors Efficiency Two on lowest point in frame Stator/Windings rotor Cast iron O-ring Random wound copper 143T-256T 143T-S449 Oversized 143T-S449 143T-S449 Double shielded Single shielded Bearing housing Grease Inlet / relief fittings 143T-256T,S449 284T-449 Cast iron Polyurea base Alemite / plug Cover Bidirectional fan Nameplate Lifting eyebolt Paint Cast Iron -143T-S449 143T-449T Polypropylene Bronze S449 2 Pole - 350-400HP Rust resistant Zinc plated Stainless steel engraved Included above 75 Lbs. Alkyd Modified -RAL7030 Variable torque 20:1 Constant torque 20:1 Constant torque 10:1 Constant torque 4:1 143T-S449 4-Pole 143T-365T Aluminum & copper rotor Copper rotor 143T-256T Aluminum rotor 143T-449T Stator Rotor, die cast copper Rotor, die cast aluminum Conduit box Options Selection and Pricing Bearings Bearing caps Fan Typical Performance Data Uni-directional fan Hardware Inverter duty General Dimensions Warranty 36 months Hazardous classification Service factor 1.10 Service factor 1.15 5) CSA - 143-S449 (40ºC) Class I, Division 2, T3 temperature code 449-S449 T2D 2-21 Part Number Index NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. 1) Standard voltage for stock items, see option selection and pricing 3) NEMA design A: 250HP and 300HP, 4 and 6 pole. 4) Available as option. section for aditional voltages 2) 8 Pole motors only. 5) Available as option, Constant torque limited to 4:1. 2014 Low Voltage AC Motors Selection and Pricing Guide Definite Special Special Purpose Motors Features Detail Features Detail Frame Size Severe Duty Motors SD100 Severe duty TEFC motors are available in two configurations which exceed NEMA Premium® efficiency with our exclusive, leading-edge, die cast copper rotor design (143T – 256T) or meet NEMA Premium® efficiency with our die cast aluminum rotor design. Either way, these motors significantly reduce operating costs and pay for themselves in a short time through energy savings. They are ideal for use in chemical processing, mining, foundry, pulp and paper, waste management and petro/chemical applications. SIMOTICS Severe duty motors SD100 (Cast iron frame) NEMA Premium® Die cast aluminum rotor 460V 60Hz – Foot mounted HP RPM Frame Voltage Type Part Number List Price $ Mult. Symb. FL Amps FL Nom Eff. (%) Lbs 1 3600 143T 208-230/460 SD100 1LE23211AA114AA3 574 SD2 1.4 82.5 75 1 1800 143T 208-230/460 SD100 1LE23211AB214AA3 537 SD2 1.4 85.5 76 1 1200 145T 208-230/460 SD100 1LE23211AC314AA3 663 SD2 1.6 82.5 77 1 900 182T 208-230/460 SD100 1LE23211CD114AA3 900 SD2 2.1 74.0 106 1.5 3600 143T 208-230/460 SD100 1LE23211AA214AA3 574 SD2 2.0 84.0 70 1.5 1800 145T 208-230/460 SD100 1LE23211AB314AA3 595 SD2 2.1 86.5 80 1.5 1200 182T 208-230/460 SD100 1LE23211CC114AA3 747 SD2 2.4 87.5 113 1.5 900 184T 208-230/460 SD100 1LE23211CD314AA3 1014 SD2 3.0 77.0 119 2 3600 145T 208-230/460 SD100 1LE23211AA314AA3 686 SD2 2.5 85.5 72 2 1800 145T 208-230/460 SD100 1LE23211AB414AA3 655 SD2 2.8 86.5 80 2 1200 184T 208-230/460 SD100 1LE23211CC314AA3 835 SD2 3.2 88.5 122 2 900 213T 230/460 SD100 1LE23212AD114AA3 1175 SD2 3.3 82.5 143 3 3600 182T 208-230/460 SD100 1LE23211CA114AA3 771 SD2 3.8 86.5 107 3 1800 182T 208-230/460 SD100 1LE23211CB114AA3 726 SD2 4.0 89.5 118 3 1200 213T 208-230/460 SD100 1LE23212AC114AA3 1017 SD2 4.3 89.5 164 3 900 215T 230/460 SD100 1LE23212AD214AA3 1621 SD2 4.8 84.0 158 5 3600 184T 208-230/460 SD100 1LE23211CA314AA3 955 SD2 6.0 88.5 118 5 1800 184T 208-230/460 SD100 1LE23211CB314AA3 848 SD2 6.5 89.5 124 5 1200 215T 208-230/460 SD100 1LE23212AC214AA3 1433 SD2 6.7 89.5 176 247 5 900 254T 230/460 SD100 1LE23212BD114AA3 2279 SD2 8.8 85.5 7.5 3600 213T 208-230/460 SD100 1LE23212AA114AA3 1121 SD2 8.8 89.5 160 7.5 1800 213T 208-230/460 SD100 1LE23212AB114AA3 1117 SD2 9.7 91.7 191 7.5 1200 254T 208-230/460 SD100 1LE23212BC114AA3 1852 SD2 10.0 91.0 292 7.5 900 256T 230/460 SD100 1LE23212BD214AA3 2630 SD2 13.0 85.5 279 10 3600 215T 208-230/460 SD100 1LE23212AA214AA3 1349 SD2 11.5 90.2 174 10 1800 215T 208-230/460 SD100 1LE23212AB214AA3 1387 SD2 12.5 91.7 197 10 1200 256T 208-230/460 SD100 1LE23212BC214AA3 2328 SD2 13.5 91.0 288 10 900 284T 230/460 SD100 1LE23212CD116AA3 3511 SD3 15.0 91.0 375 15 3600 254T 208-230/460 SD100 1LE23212BA114AA3 1853 SD2 17.5 91.0 287 15 1800 254T 208-230/460 SD100 1LE23212BB114AA3 1826 SD2 19.0 92.4 289 15 1200 284T 230/460 SD100 1LE23212CC116AA3 2954 SD2 21.0 91.7 400 15 900 286T 230/460 SD100 1LE23212CD216AA3 4569 SD2 23.0 91.0 430 20 3600 256T 208-230/460 SD100 1LE23212BA214AA3 2294 SD2 22.5 91.0 323 20 1800 256T 208-230/460 SD100 1LE23212BB214AA3 2274 SD2 25.0 93.0 322 20 1200 286T 230/460 SD100 1LE23212CC216AA3 3598 SD2 27.0 91.7 465 20 900 324T 230/460 SD100 1LE23213AD116AA3 5585 SD2 31.0 91.0 567 25 3600 284TS 460 SD100 1LE23212DA112AA3 2702 SD2 29.0 91.7 415 25 1800 284TS 460 SD100 1LE23212DB112AA3 2587 SD2 30.0 93.6 445 25 1800 284T 460 SD100 1LE23212CB112AA3 2587 SD2 30.0 93.6 445 25 1200 324T 460 SD100 1LE23213AC112AA3 4235 SD2 33.0 93.0 640 25 900 326T 460 SD100 1LE23213AD212AA3 6487 SD2 38.0 90.2 600 30 3600 286TS 460 SD100 1LE23212DA212AA3 3155 SD2 34.0 91.7 430 30 1800 286TS 460 SD100 1LE23212DB212AA3 3010 SD2 35.0 93.6 465 30 1800 286T 460 SD100 1LE23212CB212AA3 3010 SD2 35.0 93.6 465 30 1200 326T 460 SD100 1LE23213AC212AA3 5017 SD2 39.0 93.0 675 30 900 364T 460 SD100 1LE23213CD112AA3 7676 SD2 47.0 91.0 800 NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. 2-22 2014 Low Voltage AC Motors Selection and Pricing Guide Stock Stock availability subject to change. Prices and Specifications are subject to change without notice. DOE#CC032A SD100 (Cast iron frame) 460V 60Hz – Foot mounted Type Part Number List Price $ Mult. Symbl. FL Amps FL Nom Eff. (%) Lbs 40 3600 324TS 460 SD100 1LE23213BA112AA3 4163 SD2 45.0 93.6 575 40 1800 324TS 460 SD100 1LE23213BB112AA3 3998 SD2 46.0 94.1 666 40 1800 324T 460 SD100 1LE23213AB112AA3 3998 SD2 46.0 94.1 666 40 1200 364T 460 SD100 1LE23213CC112AA3 6803 SD2 49.0 94.1 863 40 900 365T 460 SD100 1LE23213CD212AA3 9283 SD2 63.0 91.7 875 50 3600 326TS 460 SD100 1LE23213BA212AA3 5384 SD2 55.0 93.6 610 50 1800 326TS 460 SD100 1LE23213BB212AA3 4910 SD2 58.0 94.5 700 50 1800 326T 460 SD100 1LE23213AB212AA3 4910 SD2 58.0 94.5 700 50 1200 365T 460 SD100 1LE23213CC212AA3 7810 SD2 62.0 94.1 900 50 900 404T 460 SD100 1LE23214AD112AA3 11091 SD2 67.0 91.7 1135 60 3600 364TS 460 SD100 1LE23213DA112AA3 7083 SD2 68.0 93.6 717 60 1800 364TS 460 SD100 1LE23213DB112AA3 7043 SD2 68.0 95.0 930 60 1800 364T 460 SD100 1LE23213CB112AA3 7043 SD2 68.0 95.0 930 60 1200 404T 460 SD100 1LE23214AC112AA3 9150 SD2 74.0 94.5 1100 60 900 405T 460 SD100 1LE23214AD212AA3 12668 SD2 78.0 91.7 1300 75 3600 365TS 460 SD100 1LE23213DA212AA3 8894 SD2 86.0 94.1 815 75 1800 365TS 460 SD100 1LE23213DB212AA3 8928 SD2 85.0 95.4 1000 75 1800 365T 460 SD100 1LE23213CB212AA3 8928 SD2 85.0 95.4 1000 75 1200 405T 460 SD100 1LE23214AC212AA3 10772 SD2 93.0 94.5 1150 75 900 444T 460 SD100 1LE23214CD112AA3 17302 SD2 94.0 93.0 1625 75 900 444TS 460 SD100 1LE23214DD112AA3 16694 SD2 94.0 93.0 1625 900 440T 460 SD100 1LE23214ED112AA3 16694 SD2 94.0 93.0 1625 3600 405TS 460 SD100 1LE23214BA212AA3 11919 SD2 108.0 94.1 1100 100 1800 405TS 460 SD100 1LE23214BB212AA3 11032 SD2 113.0 95.4 1160 100 1800 405T 460 SD100 1LE23214AB212AA3 11032 SD2 113.0 95.4 1160 100 1200 444TS 460 SD100 1LE23214DC112AA3 14724 SD2 117.0 95.0 1545 100 1200 444T 460 SD100 1LE23214CC112AA3 15332 SD2 117.0 95.0 1545 100 1200 444T 460 SD100 1LE23214EC112AA3 14724 SD2 117.0 95.0 1545 100 900 445T 460 SD100 1LE23214CD212AA3 21249 SD2 123.0 94.1 1900 900 445T 460 SD100 1LE23214ED212AA3 20641 SD2 123.0 94.1 1900 900 445TS 460 SD100 1LE23214DD212AA3 20641 SD2 123.0 94.1 1900 125 3600 444TS 460 SD100 1LE23214DA112AA3 15574 SD2 138.0 95.0 1454 125 1800 444TS 460 SD100 1LE23214DB112AA3 14518 SD2 143.0 95.4 1600 125 1800 444T 460 SD100 1LE23214CB112AA3 15126 SD2 143.0 95.4 1600 125 1800 444T 460 SD100 1LE23214EB112AA3 14518 SD2 143.0 95.4 1600 125 1200 445TS 460 SD100 1LE23214DC212AA3 18079 SD2 144.0 95.0 1720 125 1200 445T 460 SD100 1LE23214CC212AA3 18687 SD2 144.0 95.0 1720 125 1200 445T 460 SD100 1LE23214EC212AA3 18079 SD2 144.0 95.0 1720 125 900 447T 460 SD100 1LE23214CD312AA3 22505 SD2 152.0 93.6 2280 900 447T 460 SD100 1LE23214ED312AA3 21897 SD2 152.0 93.6 2280 900 447TS 460 SD100 1LE23214DD312AA3 21897 SD2 152.0 93.6 2280 Stock availability subject to change. Prices and Specifications are subject to change without notice. DOE#CC032A 2014 Low Voltage AC Motors Selection and Pricing Guide 2-23 Part Number Index NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. Shaded ratings indicated roller bearings. General Dimensions 125 125 Typical Performance Data 100 100 Options Selection and Pricing 75 100 Stock Special Features Detail Voltage Definite Purpose Motors Frame Hazardous Duty Motors RPM Severe Duty Motors HP General Purpose Motors NEMA Premium® Die cast aluminum rotor Introduction SIMOTICS Severe duty motors SIMOTICS Severe duty motors SD100 (Cast iron frame) NEMA Premium® Die cast aluminum rotor 460V 60Hz – Foot mounted HP RPM Frame Voltage Type Part Number List Price $ Mult. Symb. FL Amps FL Nom Eff. (%) Lbs 150 3600 445TS 460 SD100 1LE23214DA212AA3 18709 SD2 164.0 95.0 1615 150 1800 445TS 460 SD100 1LE23214DB212AA3 16878 SD2 170.0 95.8 1710 150 1800 445T 460 SD100 1LE23214CB212AA3 17486 SD2 170.0 95.8 1710 150 1800 445T 460 SD100 1LE23214EB212AA3 16878 SD2 170.0 95.8 1710 150 1200 447TS 460 SD100 1LE23214DC312AA3 20228 SD2 172.0 95.8 1995 150 1200 447T 460 SD100 1LE23214CC312AA3 20836 SD2 172.0 95.8 1995 150 1200 447T 460 SD100 1LE23214EC312AA3 20228 SD2 172.0 95.8 1995 150 900 447T 460 SD100 1LE23214CD412AA3 28572 SD2 186.0 94.1 2280 150 900 447T 460 SD100 1LE23214ED412AA3 27964 SD2 186.0 94.1 2280 200 3600 447TS 460 SD100 1LE23214DA312AA3 23666 SD2 216.0 95.4 1890 200 1800 447TS 460 SD100 1LE23214DB312AA3 20529 SD2 226.0 96.2 2035 200 1800 447T 460 SD100 1LE23214CB312AA3 21137 SD2 226.0 96.2 2035 200 1800 447T 460 SD100 1LE23214EB312AA3 20529 SD2 226.0 96.2 2035 200 1200 449TS 460 SD100 1LE23214DC512AA3 24761 SD2 227.0 95.8 2425 200 1200 449T 460 SD100 1LE23214CC512AA3 25369 SD2 227.0 95.8 2425 200 1200 449T 460 SD100 1LE23214EC512AA3 24761 SD2 227.0 95.8 2425 200 900 S449LS 460 SD100 1LE23214FD112AA3 34838 SD2 241.0 94.5 3200 200 900 S449SS 460 SD100 1LE23214GD112AA3 34230 SD2 241.0 94.5 3200 250 3600 449TS 460 SD100 1LE23214DA512AA3 29849 SD2 265.0 95.8 2272 250 1800 449TS 2) 460 SD100 1LE23214DB512AA3 25755 SD2 278.0 96.2 2425 250 1800 449T 2) 460 SD100 1LE23214CB512AA3 26363 SD2 278.0 96.2 2425 250 1800 449T 2) 460 SD100 1LE23214EB512AA3 25755 SD2 278.0 96.2 2425 2) 250 1200 449TS 460 SD100 1LE23214DC612AA3 26944 SD2 281.0 95.8 2390 250 1200 449T 2) 460 SD100 1LE23214CC612AA3 27552 SD2 281.0 95.8 2390 250 1200 449T 2) 460 SD100 1LE23214EC612AA3 26944 SD2 281.0 95.8 2390 250 900 S449LS 460 SD100 1LE23214FD212AA3 41045 SD2 303.0 94.5 3316 300 3600 449TS 460 SD100 1LE23214DA612AA3 40858 SD2 325.0 95.8 2200 300 1800 449TS 2) 460 SD100 1LE23214DB612AA3 30036 SD2 338.0 96.2 3130 300 1800 449T 2) 460 SD100 1LE23214CB612AA3 30644 SD2 338.0 96.2 3130 300 1800 2) 460 SD100 1LE23214EB612AA3 30036 SD2 338.0 96.2 3130 300 1200 S449LS 2) 460 SD100 1LE23214FC112AA3 48251 SD2 340.0 95.8 3240 350 3600 S449SS 1) 460 SD100 1LE23214GA112AA3 41992 SD2 370.0 95.8 2890 350 1800 S449SS 460 SD100 1LE23214GB212AA3 39003 SD2 390.0 96.2 3190 350 1800 S449LS 460 SD100 1LE23214FB212AA3 39611 SD2 390.0 96.2 3190 400 3600 S449SS 1) 460 SD100 1LE23214GA312AA3 52365 SD2 422.0 95.8 3065 400 1800 S449SS 460 SD100 1LE23214GB312AA3 48649 SD2 454.0 96.2 3240 400 1800 S449LS 460 SD100 1LE23214FB312AA3 49257 SD2 454.0 96.2 3240 449T Stock NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. Shaded ratings indicated roller bearings. Stock availability subject to change. 2-24 2014 Low Voltage AC Motors Selection and Pricing Guide 1) CW Rotation facing opposite DE 2) NEMA design A Prices and Specifications are subject to change without notice. DOE#CC032A SD100 (Cast iron frame) 460V 60Hz – C-face footless Mult. Symb. FL Amps FL Nom Eff. (%) Lbs RPM Frame Voltage Type Part Number 1 3600 143TC 208-230/460 SD100 1LE23211AA114GA3 664 SD2 1.4 82.5 75 1 1800 143TC 208-230/460 SD100 1LE23211AB214GA3 627 SD2 1.4 85.5 76 1 1200 145TC 208-230/460 SD100 1LE23211AC314GA3 753 SD2 1.6 82.5 77 208-230/460 SD100 1LE23211CD114GA3 1032 SD2 2.1 74.0 106 143TC 208-230/460 SD100 1LE23211AA214GA3 664 SD2 2.0 84.0 70 1.5 1800 145TC 208-230/460 SD100 1LE23211AB314GA3 685 SD2 2.1 86.5 80 1.5 1200 182TC 208-230/460 SD100 1LE23211CC114GA3 879 SD2 2.4 87.5 113 1.5 900 184TC 208-230/460 SD100 1LE23211CD314GA3 1146 SD2 3.0 77.0 119 2 3600 145TC 208-230/460 SD100 1LE23211AA314GA3 776 SD2 2.5 85.5 72 2 1800 145TC 208-230/460 SD100 1LE23211AB414GA3 745 SD2 2.8 86.5 80 2 1200 184TC 208-230/460 SD100 1LE23211CC314GA3 967 SD2 3.2 88.5 122 2 900 213TC 208-230/460 SD100 1LE23212AD114GA3 1307 SD2 3.3 82.5 143 3 3600 182TC 208-230/460 SD100 1LE23211CA114GA3 903 SD2 3.8 86.5 107 3 1800 182TC 208-230/460 SD100 1LE23211CB114GA3 858 SD2 4.0 89.5 118 3 1200 213TC 208-230/460 SD100 1LE23212AC114GA3 1149 SD2 4.3 89.5 164 3 900 215TC 208-230/460 SD100 1LE23212AD214GA3 1753 SD2 4.8 84.0 158 5 3600 184TC 208-230/460 SD100 1LE23211CA314GA3 1087 SD2 6.0 88.5 118 5 1800 184TC 208-230/460 SD100 1LE23211CB314GA3 980 SD2 6.5 89.5 124 5 1200 215TC 208-230/460 SD100 1LE23212AC214GA3 1565 SD2 6.7 89.5 176 5 900 254TC 208-230/460 SD100 1LE23212BD114GA3 2459 SD2 8.8 85.5 247 7.5 3600 213TC 208-230/460 SD100 1LE23212AA114GA3 1253 SD2 8.8 89.5 160 7.5 1800 213TC 208-230/460 SD100 1LE23212AB114GA3 1249 SD2 9.7 91.7 191 7.5 1200 254TC 208-230/460 SD100 1LE23212BC114GA3 2032 SD2 10.0 91.0 292 256TC 208-230/460 SD100 1LE23212BD214GA3 2810 SD2 13.0 85.5 279 3600 215TC 208-230/460 SD100 1LE23212AA214GA3 1481 SD2 11.5 90.2 174 10 1800 215TC 208-230/460 SD100 1LE23212AB214GA3 1519 SD2 12.5 91.7 197 10 1200 256TC 208-230/460 SD100 1LE23212BC214GA3 2508 SD2 13.5 91.0 288 15 3600 254TC 208-230/460 SD100 1LE23212BA114GA3 2033 SD2 17.5 91.0 287 15 1800 254TC 208-230/460 SD100 1LE23212BB114GA3 2006 SD2 19.0 92.4 289 20 3600 256TC 208-230/460 SD100 1LE23212BA214GA3 2474 SD2 22.5 91.0 323 20 1800 256TC 208-230/460 SD100 1LE23212BB214GA3 2454 SD2 25.0 93.0 322 Typical Performance Data 900 10 Options Selection and Pricing 7.5 Special Features Detail 182TC Definite Purpose Motors 900 3600 Hazardous Duty Motors 1 1.5 Stock Severe Duty Motors HP List Price $ General Purpose Motors NEMA Premium® Die cast aluminum rotor Introduction SIMOTICS Severe duty motors General Dimensions Stock availability subject to change. Prices and Specifications are subject to change without notice. DOE#CC032A 2014 Low Voltage AC Motors Selection and Pricing Guide 2-25 Part Number Index NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. SIMOTICS Severe duty motors SD100 (Cast iron frame) NEMA Premium® Die cast copper rotor 460V 60Hz – Foot mounted HP RPM Frame Voltage Type List Price $ Part Number Mult. Symb. FL Amps FL Nom Eff. (%) Lbs 1 1800 143T 208-230/460 SD100 1LE23111AB214AA3 627 SD2 1.5 86.5 81 1 1200 145T 208-230/460 SD100 1LE23111AC314AA3 780 SD2 1.6 84.0 81 1.5 3600 143T 208-230/460 SD100 1LE23111AA214AA3 671 SD2 1.9 87.5 80 1.5 1800 145T 208-230/460 SD100 1LE23111AB314AA3 695 SD2 2.1 87.5 81 2 3600 145T 208-230/460 SD100 1LE23111AA314AA3 802 SD2 2.6 88.5 80 2 1800 145T 208-230/460 SD100 1LE23111AB414AA3 765 SD2 2.8 87.5 81 3 3600 182T 208-230/460 SD100 1LE23111CA114AA3 903 SD2 3.8 89.5 121 3 1800 182T 208-230/460 SD100 1LE23111CB114AA3 847 SD2 4.0 90.2 125 3 1200 213T 208-230/460 SD100 1LE23112AC114AA3 1198 SD2 4.3 90.2 170 5 3600 184T 208-230/460 SD100 1LE23111CA314AA3 1117 SD2 6.2 90.2 123 5 1800 184T 208-230/460 SD100 1LE23111CB314AA3 990 SD2 6.7 90.2 129 5 1200 215T 208-230/460 SD100 1LE23112AC214AA3 1688 SD2 7.0 90.2 184 7.5 3600 213T 208-230/460 SD100 1LE23112AA114AA3 1312 SD2 8.5 91.7 191 7.5 1800 213T 208-230/460 SD100 1LE23112AB114AA3 1304 SD2 9.5 92.4 198 7.5 1200 254T 208-230/460 SD100 1LE23112BC114AA3 2181 SD2 10.5 92.4 336 10 3600 215T 208-230/460 SD100 1LE23112AA214AA3 1579 SD2 11.5 91.7 196 10 1800 215T 208-230/460 SD100 1LE23112AB214AA3 1617 SD2 12.5 92.4 206 10 1200 256T 208-230/460 SD100 1LE23112BC214AA3 2742 SD2 13.5 92.4 337 15 3600 254T 208-230/460 SD100 1LE23112BA114AA3 2168 SD2 17.0 92.4 309 15 1800 254T 208-230/460 SD100 1LE23112BB114AA3 2131 SD2 19.0 93.0 297 20 3600 256T 208-230/460 SD100 1LE23112BA214AA3 2684 SD2 22.5 92.4 333 20 1800 256T 208-230/460 SD100 1LE23112BB214AA3 2653 SD2 25.0 93.6 341 NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. 2-26 2014 Low Voltage AC Motors Selection and Pricing Guide Stock Stock availability subject to change. Prices and Specifications are subject to change without notice. DOE#CC032A SD100 (Cast iron frame) 460V 60Hz – C-face footless Mult. Symb. FL Amps FL Nom Eff (%) Lbs RPM Frame Voltage Type Part Number 1 1800 143TC 208-230/460 SD100 1LE23111AB214GA3 717 SD2 1.5 86.5 81 1 1200 145TC 208-230/460 SD100 1LE23111AC314GA3 870 SD2 1.6 84.0 81 1.5 3600 143TC 208-230/460 SD100 1LE23111AA214GA3 761 SD2 1.9 87.5 80 81 208-230/460 SD100 1LE23111AB314GA3 785 SD2 2.1 87.5 145TC 208-230/460 SD100 1LE23111AA314GA3 892 SD2 2.6 88.5 80 2 1800 145TC 208-230/460 SD100 1LE23111AB414GA3 855 SD2 2.8 87.5 81 3 3600 182TC 208-230/460 SD100 1LE23111CA114GA3 1035 SD2 3.8 89.5 121 3 1800 182TC 208-230/460 SD100 1LE23111CB114GA3 979 SD2 4.0 90.2 125 3 1200 213TC 208-230/460 SD100 1LE23112AC114GA3 1330 SD2 4.3 90.2 170 5 3600 184TC 208-230/460 SD100 1LE23111CA314GA3 1249 SD2 6.2 90.2 123 5 1800 184TC 208-230/460 SD100 1LE23111CB314GA3 1122 SD2 6.7 90.2 129 5 1200 215TC 208-230/460 SD100 1LE23112AC214GA3 1820 SD2 7.0 90.2 184 7.5 3600 213TC 208-230/460 SD100 1LE23112AA114GA3 1444 SD2 8.5 91.7 191 7.5 1800 213TC 208-230/460 SD100 1LE23112AB114GA3 1436 SD2 9.5 92.4 198 7.5 1200 254TC 208-230/460 SD100 1LE23112BC114GA3 2361 SD2 10.5 92.4 336 10 3600 215TC 208-230/460 SD100 1LE23112AA214GA3 1711 SD2 11.5 91.7 196 10 1800 215TC 208-230/460 SD100 1LE23112AB214GA3 1749 SD2 12.5 92.4 206 10 1200 256TC 208-230/460 SD100 1LE23112BC214GA3 2922 SD2 13.5 92.4 337 15 3600 254TC 208-230/460 SD100 1LE23112BA114GA3 2348 SD2 17.0 92.4 309 15 1800 254TC 208-230/460 SD100 1LE23112BB114GA3 2311 SD2 19.0 93.0 297 20 3600 256TC 208-230/460 SD100 1LE23112BA214GA3 2864 SD2 22.5 92.4 333 20 1800 256TC 208-230/460 SD100 1LE23112BB214GA3 2833 SD2 25.0 93.6 341 Special Features Detail 145TC 3600 Definite Purpose Motors 1800 2 Hazardous Duty Motors 1.5 Stock Severe Duty Motors HP List Price $ General Purpose Motors NEMA Premium® Die cast copper rotor Introduction SIMOTICS Severe duty motors Options Selection and Pricing Typical Performance Data General Dimensions Stock availability subject to change. Prices and Specifications are subject to change without notice. DOE#CC032A 2014 Low Voltage AC Motors Selection and Pricing Guide 2-27 Part Number Index NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. SIMOTICS Severe duty motors SD100 (Cast iron frame) NEMA Premium® Die cast aluminum rotor 575V 60Hz – Foot mounted HP RPM Frame Voltage Type Part Number List Price $ Mult. Symb. FL Amps FL Nom Eff. (%) Lbs 1 3600 143T 575 SD100 1LE23211AA113AA3 574 SD2 1.1 82.5 75 1 1800 143T 575 SD100 1LE23211AB213AA3 537 SD2 1.1 85.5 76 1 1200 145T 575 SD100 1LE23211AC313AA3 663 SD2 1.3 82.5 77 1 900 182T 575 SD100 1LE23211CD113AA3 900 SD2 1.6 74.0 106 1.5 3600 143T 575 SD100 1LE23211AA213AA3 574 SD2 1.6 84.0 70 1.5 1800 145T 575 SD100 1LE23211AB313AA3 595 SD2 1.7 86.5 80 1.5 1200 182T 575 SD100 1LE23211CC113AA3 747 SD2 1.9 87.5 113 1.5 900 184T 575 SD100 1LE23211CD313AA3 1014 SD2 2.4 77.0 119 2 3600 145T 575 SD100 1LE23211AA313AA3 686 SD2 2.0 85.5 72 2 1800 145T 575 SD100 1LE23211AB413AA3 655 SD2 2.2 86.5 80 2 1200 184T 575 SD100 1LE23211CC313AA3 835 SD2 2.6 88.5 122 2 900 213T 575 SD100 1LE23212AD113AA3 1175 SD2 2.6 82.5 143 3 3600 182T 575 SD100 1LE23211CA113AA3 771 SD2 3.0 86.5 107 3 1800 182T 575 SD100 1LE23211CB113AA3 726 SD2 3.2 89.5 118 3 1200 213T 575 SD100 1LE23212AC113AA3 1017 SD2 3.4 89.5 164 3 900 215T 575 SD100 1LE23212AD213AA3 1621 SD2 3.8 84.0 158 5 3600 184T 575 SD100 1LE23211CA313AA3 955 SD2 4.8 88.5 118 5 1800 184T 575 SD100 1LE23211CB313AA3 848 SD2 5.2 89.5 124 5 1200 215T 575 SD100 1LE23212AC213AA3 1433 SD2 5.4 89.5 176 5 900 254T 575 SD100 1LE23212BD113AA3 2279 SD2 7.0 85.5 247 7.5 3600 213T 575 SD100 1LE23212AA113AA3 1121 SD2 7.0 89.5 160 7.5 1800 213T 575 SD100 1LE23212AB113AA3 1117 SD2 7.8 91.7 191 7.5 1200 254T 575 SD100 1LE23212BC113AA3 1852 SD2 8.0 91.0 292 7.5 900 256T 575 SD100 1LE23212BD213AA3 2630 SD2 10.5 85.5 279 10 3600 215T 575 SD100 1LE23212AA213AA3 1349 SD2 9.2 90.2 174 10 1800 215T 575 SD100 1LE23212AB213AA3 1387 SD2 10.0 91.7 197 10 1200 256T 575 SD100 1LE23212BC213AA3 2328 SD2 11.0 91.0 288 10 900 284T 575 SD100 1LE23212CD113AA3 3511 SD2 12.0 91.0 375 15 3600 254T 575 SD100 1LE23212BA113AA3 1853 SD2 14.0 91.0 287 15 1800 254T 575 SD100 1LE23212BB113AA3 1826 SD2 15.0 92.4 289 15 1200 284T 575 SD100 1LE23212CC113AA3 2954 SD2 17.0 91.7 400 15 900 286T 575 SD100 1LE23212CD213AA3 4569 SD2 18.4 91.0 430 20 3600 256T 575 SD100 1LE23212BA213AA3 2294 SD2 18.0 91.0 323 20 1800 256T 575 SD100 1LE23212BB213AA3 2274 SD2 20.0 93.0 322 20 1200 286T 575 SD100 1LE23212CC213AA3 3598 SD2 21.5 91.7 465 20 900 324T 575 SD100 1LE23213AD113AA3 5585 SD2 24.8 91.0 567 25 3600 284TS 575 SD100 1LE23212DA113AA3 2702 SD2 23.0 91.7 415 25 1800 284TS 575 SD100 1LE23212DB113AA3 2587 SD2 24.0 93.6 445 25 1800 284T 575 SD100 1LE23212CB113AA3 2587 SD2 24.0 93.6 445 25 1200 324T 575 SD100 1LE23213AC113AA3 4235 SD2 26.0 93.0 640 25 900 326T 575 SD100 1LE23213AD213AA3 6487 SD2 30.4 90.2 600 30 3600 286TS 575 SD100 1LE23212DA213AA3 3155 SD2 27.0 91.7 430 30 1800 286TS 575 SD100 1LE23212DB213AA3 3010 SD2 28.0 93.6 465 30 1800 286T 575 SD100 1LE23212CB213AA3 3010 SD2 28.0 93.6 465 30 1200 326T 575 SD100 1LE23213AC213AA3 5017 SD2 31.0 93.0 675 30 900 364T 575 SD100 1LE23213CD113AA3 7676 SD2 37.6 91.0 800 NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. 2-28 2014 Low Voltage AC Motors Selection and Pricing Guide Stock Stock availability subject to change. Prices and Specifications are subject to change without notice. Stock availability subject to change. SD100 (Cast iron frame) 575V 60Hz – Foot mounted Frame Voltage Type Part Number List Price $ Mult. Symb. FL Amps FL Nom Eff. (%) Lbs 40 3600 324TS 575 SD100 1LE23213BA113AA3 4163 SD2 36.0 93.6 575 40 1800 324TS 575 SD100 1LE23213BB113AA3 3998 SD2 37.0 94.1 666 40 1800 324T 575 SD100 1LE23213AB113AA3 3998 SD2 37.0 94.1 666 40 1200 364T 575 SD100 1LE23213CC113AA3 6803 SD2 39.0 94.1 863 40 900 365T 575 SD100 1LE23213CD213AA3 9283 SD2 50.4 91.7 875 50 3600 326TS 575 SD100 1LE23213BA213AA3 5384 SD2 44.0 93.6 610 50 1800 326TS 575 SD100 1LE23213BB213AA3 4910 SD2 46.0 94.5 700 50 1800 326T 575 SD100 1LE23213AB213AA3 4910 SD2 46.0 94.5 700 50 1200 365T 575 SD100 1LE23213CC213AA3 7810 SD2 50.0 94.1 900 50 900 404T 575 SD100 1LE23214AD113AA3 11091 SD2 53.6 91.7 1135 60 3600 364TS 575 SD100 1LE23213DA113AA3 7083 SD2 54.5 93.6 717 60 1800 364TS 575 SD100 1LE23213DB113AA3 7043 SD2 54.5 95.0 930 60 1800 364T 575 SD100 1LE23213CB113AA3 7043 SD2 54.5 95.0 930 404T 575 SD100 1LE23214AC113AA3 9150 SD2 59.0 94.5 1100 900 405T 575 SD100 1LE23214AD213AA3 12668 SD2 62.4 91.7 1300 75 3600 365TS 575 SD100 1LE23213DA213AA3 8894 SD2 68.8 94.1 815 75 1800 365TS 575 SD100 1LE23213DB213AA3 8928 SD2 68.0 95.4 1000 75 1800 365T 575 SD100 1LE23213CB213AA3 8928 SD2 68.0 95.4 1000 75 1200 405T 575 SD100 1LE23214AC213AA3 10772 SD2 75.0 94.5 1150 75 900 444T 575 SD100 1LE23214CD113AA3 17302 SD2 75.2 93.0 1625 75 900 444T 575 SD100 1LE23214ED113AA3 16694 SD2 75.2 93.0 1625 75 900 444TS 575 SD100 1LE23214DD113AA3 16694 SD2 75.2 93.0 1625 100 3600 405TS 575 SD100 1LE23214BA213AA3 11919 SD2 87.0 94.1 1100 100 1800 405TS 575 SD100 1LE23214BB213AA3 11032 SD2 90.5 95.4 1160 100 1800 405T 575 SD100 1LE23214AB213AA3 11032 SD2 90.5 95.4 1160 1545 1200 444TS 575 SD100 1LE23214DC113AA3 14724 SD2 94.0 95.0 1200 444T 575 SD100 1LE23214CC113AA3 15332 SD2 94.0 95.0 1545 100 1200 444T 575 SD100 1LE23214EC113AA3 14724 SD2 94.0 95.0 1545 1900 100 900 445T 575 SD100 1LE23214CD213AA3 21249 SD2 98.4 94.1 100 900 445T 575 SD100 1LE23214ED213AA3 20641 SD2 98.4 94.1 1900 100 900 445TS 575 SD100 1LE23214DD213AA3 20641 SD2 98.4 94.1 1900 125 3600 444TS 575 SD100 1LE23214DA113AA3 15574 SD2 110.0 95.0 1454 1800 444TS 575 SD100 1LE23214DB113AA3 14518 SD2 115.0 95.4 1600 1800 444T 575 SD100 1LE23214CB113AA3 15126 SD2 115.0 95.4 1600 125 1800 444T 575 SD100 1LE23214EB113AA3 14518 SD2 115.0 95.4 1600 125 1200 445TS 575 SD100 1LE23214DC213AA3 18079 SD2 115.0 95.0 1720 125 1200 445T 575 SD100 1LE23214CC213AA3 18687 SD2 115.0 95.0 1720 125 1200 445T 575 SD100 1LE23214EC213AA3 18079 SD2 115.0 95.0 1720 900 447T 575 SD100 1LE23214CD313AA3 22505 SD2 121.6 93.6 2280 900 447T 575 SD100 1LE23214ED313AA3 21897 SD2 121.6 93.6 2280 125 900 447TS 575 SD100 1LE23214DD313AA3 21897 SD2 121.6 93.6 2280 Stock availability subject to change. Prices and Specifications are subject to change without notice. DOE#CC032A 2014 Low Voltage AC Motors Selection and Pricing Guide 2-29 Part Number Index NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. Shaded ratings indicated roller bearings. General Dimensions 125 125 Typical Performance Data 125 125 Options Selection and Pricing 100 100 Special Features Detail 1200 Definite Purpose Motors 60 60 Stock Hazardous Duty Motors RPM Severe Duty Motors HP General Purpose Motors NEMA Premium® Die cast aluminum rotor Introduction SIMOTICS Severe duty motors SIMOTICS Severe duty motors SD100 (Cast iron frame) NEMA Premium® Die cast aluminum rotor 575V 60Hz – Foot mounted HP RPM Frame Voltage Type Part Number List Price $ Mult. Symb. FL Amps FL Nom Eff. (%) Lbs 150 3600 445TS 575 SD100 1LE23214DA213AA3 18709 SD2 131.0 95.0 1615 150 1800 445TS 575 SD100 1LE23214DB213AA3 16878 SD2 136.0 95.8 1710 150 1800 445T 575 SD100 1LE23214CB213AA3 17486 SD2 136.0 95.8 1710 150 1800 445T 575 SD100 1LE23214EB213AA3 16878 SD2 136.0 95.8 1710 150 1200 447TS 575 SD100 1LE23214DC313AA3 20228 SD2 138.0 95.8 1995 150 1200 447T 575 SD100 1LE23214CC313AA3 20836 SD2 138.0 95.8 1995 150 1200 447T 575 SD100 1LE23214EC313AA3 20228 SD2 138.0 95.8 1995 150 900 447T 575 SD100 1LE23214CD413AA3 28572 SD2 148.8 94.1 2280 150 900 447T 575 SD100 1LE23214ED413AA3 27964 SD2 148.8 94.1 2280 150 900 447TS 575 SD100 1LE23214DD413AA3 27964 SD2 148.8 94.1 2280 200 3600 447TS 575 SD100 1LE23214DA313AA3 23666 SD2 173.0 95.4 1890 200 1800 447TS 575 SD100 1LE23214DB313AA3 20529 SD2 181.0 96.2 2035 200 1800 447T 575 SD100 1LE23214CB313AA3 21137 SD2 181.0 96.2 2035 200 1800 447T 575 SD100 1LE23214EB313AA3 20529 SD2 181.0 96.2 2035 200 1200 449TS 575 SD100 1LE23214DC513AA3 24761 SD2 182.0 95.8 2425 200 1200 449T 575 SD100 1LE23214CC513AA3 25369 SD2 182.0 95.8 2425 200 1200 449T 575 SD100 1LE23214EC513AA3 24761 SD2 182.0 95.8 2425 200 900 S449LS 575 SD100 1LE23214FD113AA3 34838 SD2 192.8 94.5 3200 200 900 S449SS 575 SD100 1LE23214GD113AA3 34230 SD2 192.8 94.5 3200 250 3600 449TS 575 SD100 1LE23214DA513AA3 29849 SD2 212.0 95.8 2272 250 1800 449TS 2) 575 SD100 1LE23214DB513AA3 25755 SD2 223.0 96.2 2425 250 1800 449T 2) 575 SD100 1LE23214CB513AA3 26363 SD2 223.0 96.2 2425 250 1800 449T 2) 575 SD100 1LE23214EB513AA3 25755 SD2 223.0 96.2 2425 250 1200 449TS 2) 575 SD100 1LE23214DC613AA3 26944 SD2 225.0 95.8 2390 250 1200 449T 2) 575 SD100 1LE23214CC613AA3 27552 SD2 225.0 95.8 2390 250 1200 449T 2) 575 SD100 1LE23214EC613AA3 26944 SD2 225.0 95.8 2390 250 900 S449LS 575 SD100 1LE23214FD213AA3 41045 SD2 303.0 94.5 3316 300 3600 449TS 575 SD100 1LE23214DA613AA3 40858 SD2 260.0 95.8 2200 300 1800 449TS 2) 575 SD100 1LE23214DB613AA3 30036 SD2 270.0 96.2 3130 300 1800 449T 2) 575 SD100 1LE23214CB613AA3 30644 SD2 270.0 96.2 3130 300 1800 449T 2) 575 SD100 1LE23214EB613AA3 30036 SD2 270.0 96.2 3130 300 1200 S449LS 2) 575 SD100 1LE23214FC113AA3 55859 SD2 272.0 95.8 3240 350 3600 S449SS 1) 575 SD100 1LE23214GA113AA3 41992 SD2 296.0 95.8 2890 350 1800 S449SS 575 SD100 1LE23214GB213AA3 39003 SD2 312.0 96.2 3190 350 1800 S449LS 575 SD100 1LE23214FB213AA3 39611 SD2 312.0 96.2 3190 400 3600 S449SS 1) 575 SD100 1LE23214GA313AA3 52365 SD2 338.0 95.8 3065 400 1800 S449SS 575 SD100 1LE23214GB313AA3 48649 SD2 363.0 96.2 3240 400 1800 S449LS 575 SD100 1LE23214FB313AA3 49257 SD2 363.0 96.2 3240 NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. Shaded ratings indicated roller bearings. Stock availability subject to change. 2-30 2014 Low Voltage AC Motors Selection and Pricing Guide Stock 1) CW Rotation facing opposite DE 2) NEMA design A Prices and Specifications are subject to change without notice. DOE#CC032A SD100 (Cast iron frame) 575V 60Hz – C-Face Footless RPM Frame Voltage Type Part Number List Price $ Mult. Symb. FL Amps FL Nom Eff. (%) Lbs 1 3600 143TC 575 SD100 1LE23211AA113GA3 664 SD2 1.1 82.5 75 1 1800 143TC 575 SD100 1LE23211AB213GA3 627 SD2 1.1 85.5 76 1 1200 145TC 575 SD100 1LE23211AC313GA3 753 SD2 1.3 82.5 77 575 SD100 1LE23211CD113GA3 1032 SD2 1.6 74.0 106 143TC 575 SD100 1LE23211AA213GA3 664 SD2 1.6 84.0 70 1.5 1800 145TC 575 SD100 1LE23211AB313GA3 685 SD2 1.7 86.5 80 1.5 1200 182TC 575 SD100 1LE23211CC113GA3 879 SD2 1.9 87.5 113 1.5 900 184TC 575 SD100 1LE23211CD313GA3 1146 SD2 2.4 77.0 119 2 3600 145TC 575 SD100 1LE23211AA313GA3 776 SD2 2.0 85.5 72 2 1800 145TC 575 SD100 1LE23211AB413GA3 745 SD2 2.2 86.5 80 2 1200 184TC 575 SD100 1LE23211CC313GA3 967 SD2 2.6 88.5 122 2 900 213TC 575 SD100 1LE23212AD113GA3 1307 SD2 2.6 82.5 143 3 3600 182TC 575 SD100 1LE23211CA113GA3 903 SD2 3.0 86.5 107 3 1800 182TC 575 SD100 1LE23211CB113GA3 858 SD2 3.2 89.5 118 3 1200 213TC 575 SD100 1LE23212AC113GA3 1149 SD2 3.4 89.5 164 3 900 215TC 575 SD100 1LE23212AD213GA3 1753 SD2 3.8 84.0 158 5 3600 184TC 575 SD100 1LE23211CA313GA3 1087 SD2 4.8 88.5 118 5 1800 184TC 575 SD100 1LE23211CB313GA3 980 SD2 5.2 89.5 124 5 1200 215TC 575 SD100 1LE23212AC213GA3 1565 SD2 5.4 89.5 176 5 900 254TC 575 SD100 1LE23212BD113GA3 2459 SD2 7.0 85.5 247 7.5 3600 213TC 575 SD100 1LE23212AA113GA3 1253 SD2 7.0 89.5 160 7.5 1800 213TC 575 SD100 1LE23212AB113GA3 1249 SD2 7.8 91.7 191 254TC 575 SD100 1LE23212BC113GA3 SD2 8.0 91.0 292 900 256TC 575 SD100 1LE23212BD213GA3 2810 SD2 10.5 85.5 279 10 3600 215TC 575 SD100 1LE23212AA213GA3 1481 SD2 9.2 90.2 174 10 1800 215TC 575 SD100 1LE23212AB213GA3 1519 SD2 10.0 91.7 197 10 1200 256TC 575 SD100 1LE23212BC213GA3 2508 SD2 11.0 91.0 288 15 3600 254TC 575 SD100 1LE23212BA113GA3 2033 SD2 14.0 91.0 287 15 1800 254TC 575 SD100 1LE23212BB113GA3 2006 SD2 15.0 92.4 289 20 3600 256TC 575 SD100 1LE23212BA213GA3 2474 SD2 18.0 91.0 323 20 1800 256TC 575 SD100 1LE23212BB213GA3 2454 SD2 20.0 93.0 322 Typical Performance Data 1200 7.5 Options Selection and Pricing 7.5 2032 Special Features Detail 182TC Definite Purpose Motors 900 3600 Hazardous Duty Motors 1 1.5 Stock Severe Duty Motors HP General Purpose Motors NEMA Premium® Die cast aluminum rotor Introduction SIMOTICS Severe duty motors General Dimensions Stock availability subject to change. Prices and Specifications are subject to change without notice. DOE#CC032A 2014 Low Voltage AC Motors Selection and Pricing Guide 2-31 Part Number Index NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. SD100 IEEE841 General Purpose Motors ® US 5 YEAR ee HP Range Severe Duty Motors SD100 IEEE841 severe duty/IEEE 841 TEFC motors are available in two configurations which exceed NEMA Premium® efficiency with our exclusive, leading-edge, die cast copper rotor design (143T-256T) or meet NEMA Premium® efficiency with our die cast aluminum rotor design (143T-S449). They also exceed IEEE Std 841TM-2009 standards for high performance, rugged construction and long service life, for the most demanding industrial applications. They are ideal for use in chemical processing, mining, foundry, pulp and paper, waste management and petro/chemical applications. C Introduction SIMOTICS Severe duty motors WARRANTY NEMA Premium ® Plus NEMA Premium ® 143T-256T 143T-S449 3 phase 60Hz 1-400 HP 1-400 HP NEMA design B 2) NEMA MG1 Part 31 1.15 Efficiency Voltage 460 V 575 V Insulation 1) Insulation Class F Service Factor @ 40ºC Temperature rise (Sine wave) Frame 8 hole feet Condensation drains High strength carbon steel shaft Inpro/Seal® Bearing Isolator - IP55 Class B @ 1.0SF Class F @ 1.15SF Cast iron Casted T Drains C1045 DE & NDE Two on lowest point in frame Cast iron Neoprene gasket Random wound copper 143T-256T 143T-S449 Oversized 143T-S449 143T-S449 Double shielded Single shielded Bearing housing Grease Inlet / relief fittings S449 143T-449T Cast iron Bearing caps Polyurea base Alemite / pressure (auto) Cast iron Bidirectional fan Nameplate Lifting eyebolt Paint 143T-S449 143T-256T Polypropylene Bronze S449 4 Pole - 300HP 2 & 4 Pole 350-400HP Rust resistant Zinc plated Stainless steel engraved Included Alkyd Modified -RAL7030 Variable torque 20:1 Constant torque 20:1 Constant torque 10:1 Constant torque 4:1 143T-S449 4-Pole 143T-365T Aluminum & copper rotor Copper rotor 143T-256T Aluminum rotor 143T-449T Stator Rotor, die cast copper Rotor, die cast aluminum Conduit box Special Features Detail Stator/Windings Rotor Definite Purpose Motors 1-400 HP 143T-S449 Hazardous Duty Motors Frame Size Bearings Options Selection and Pricing Fan and Fan Cover Hardware Typical Performance Data Uni-directional fan Inverter Duty General Dimensions Warranty 60 months Hazrdous classification Service factor 1.0 3) CSA - 143-S449 (40ºC) Class I, Division 2, T3 temperature code 449-S449 T2D NA 2014 Low Voltage AC Motors Selection and Pricing Guide 2-33 Part Number Index Service factor 1.15 NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. 1) Standard voltage for stock items, see option selection and pricing 2) NEMA desing A: 250HP and 300HP, 4 and 6 pole. 3) Available as option, Constatn torque limited to 4:1. section for aditional voltages. SIMOTICS Severe duty motors SD100 IEEE841 (Cast iron frame) NEMA Premium® Die cast aluminum rotor 460V 60Hz – Foot mounted HP RPM Frame Voltage Type Part Number List Price $ Mult. Symb. FL Amps FL Nom Eff. (%) Lbs 1 3600 143T 460 SD100 IEEE841 1LE24211AA112AA3 787 SD3 1.4 82.5 75 1 1800 143T 460 SD100 IEEE841 1LE24211AB212AA3 762 SD3 1.4 85.5 76 1 1200 145T 460 SD100 IEEE841 1LE24211AC312AA3 898 SD3 1.6 82.5 77 1 900 182T 460 SD100 IEEE841 1LE24211CD112AA3 1457 SD3 2.1 81.5 106 1.5 3600 143T 460 SD100 IEEE841 1LE24211AA212AA3 788 SD3 2.0 84.0 70 1.5 1800 145T 460 SD100 IEEE841 1LE24211AB312AA3 822 SD3 2.1 86.5 80 1.5 1200 182T 460 SD100 IEEE841 1LE24211CC112AA3 1006 SD3 2.4 87.5 113 1.5 900 184T 460 SD100 IEEE841 1LE24211CD312AA3 1719 SD3 3.3 82.5 119 2 3600 145T 460 SD100 IEEE841 1LE24211AA312AA3 904 SD3 2.5 85.5 72 2 1800 145T 460 SD100 IEEE841 1LE24211AB412AA3 878 SD3 2.8 86.5 80 2 1200 184T 460 SD100 IEEE841 1LE24211CC312AA3 1071 SD3 3.2 88.5 122 2 900 213T 460 SD100 IEEE841 1LE24212AD112AA3 2023 SD3 3.3 84.0 145 3 3600 182T 460 SD100 IEEE841 1LE24211CA112AA3 947 SD3 3.8 86.5 107 3 1800 182T 460 SD100 IEEE841 1LE24211CB112AA3 907 SD3 4.0 89.5 118 3 1200 213T 460 SD100 IEEE841 1LE24212AC112AA3 1350 SD3 4.3 89.5 164 3 900 215T 460 SD100 IEEE841 1LE24212AD212AA3 2565 SD3 4.8 85.5 160 5 3600 184T 460 SD100 IEEE841 1LE24211CA312AA3 1159 SD3 6.0 88.5 118 5 1800 184T 460 SD100 IEEE841 1LE24211CB312AA3 1039 SD3 6.5 89.5 124 5 1200 215T 460 SD100 IEEE841 1LE24212AC212AA3 1787 SD3 6.7 89.5 176 5 900 254T 460 SD100 IEEE841 1LE24212BD112AA3 3428 SD3 8.8 86.5 247 7.5 3600 213T 460 SD100 IEEE841 1LE24212AA112AA3 1421 SD3 8.8 89.5 160 7.5 1800 213T 460 SD100 IEEE841 1LE24212AB112AA3 1380 SD3 9.7 91.7 191 7.5 1200 254T 460 SD100 IEEE841 1LE24212BC112AA3 2284 SD3 10.0 91.0 292 7.5 900 256T 460 SD100 IEEE841 1LE24212BD212AA3 4297 SD3 13.0 87.5 279 10 3600 215T 460 SD100 IEEE841 1LE24212AA212AA3 1634 SD3 11.5 90.2 174 10 1800 215T 460 SD100 IEEE841 1LE24212AB212AA3 1652 SD3 12.5 91.7 197 10 1200 256T 460 SD100 IEEE841 1LE24212BC212AA3 2840 SD3 13.5 91.0 288 10 900 284T 460 SD100 IEEE841 1LE24212CD112AA3 4398 SD3 15.0 90.2 362 15 3600 254T 460 SD100 IEEE841 1LE24212BA112AA3 2216 SD3 17.5 91.0 287 15 1800 254T 460 SD100 IEEE841 1LE24212BB112AA3 2177 SD3 19.0 92.4 289 15 1200 284T 460 SD100 IEEE841 1LE24212CC112AA3 3541 SD3 21.0 91.7 400 15 900 286T 460 SD100 IEEE841 1LE24212CD212AA3 5623 SD3 23.0 90.2 420 20 3600 256T 460 SD100 IEEE841 1LE24212BA212AA3 2720 SD3 22.5 91.0 323 20 1800 256T 460 SD100 IEEE841 1LE24212BB212AA3 2806 SD3 25.0 93.0 322 20 1200 286T 460 SD100 IEEE841 1LE24212CC212AA3 4316 SD3 27.0 91.7 465 20 900 324T 460 SD100 IEEE841 1LE24213AD112AA3 6875 SD3 31.0 91.0 570 NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. Stock availability subject to change. 2-34 2014 Low Voltage AC Motors Selection and Pricing Guide Stock 900 RPM Motors meet or exceed EPAct efficiency. Prices and Specifications are subject to change without notice. DOE#CC032A NEMA Premium® Die cast aluminum rotor 460V 60Hz – Foot mounted HP RPM Frame Voltage Type Part Number List Price $ Mult. Symb. FL Amps FL Nom Eff. (%) Lbs 3600 284TS 460 SD100 IEEE841 1LE24212DA112AA3 3231 SD3 29.0 91.7 415 1800 284T 460 SD100 IEEE841 1LE24212CB112AA3 3086 SD3 30.0 93.6 445 25 1800 284TS 460 SD100 IEEE841 1LE24212DB112AA3 3086 SD3 30.0 93.6 445 25 1200 324T 460 SD100 IEEE841 1LE24213AC112AA3 5227 SD3 33.0 93.0 640 460 SD100 IEEE841 1LE24213AD212AA3 7986 SD3 41.0 90.2 582 286TS 460 SD100 IEEE841 1LE24212DA212AA3 3775 SD3 34.0 91.7 430 30 1800 286T 460 SD100 IEEE841 1LE24212CB212AA3 3588 SD3 35.0 93.6 465 30 1800 286TS 460 SD100 IEEE841 1LE24212DB212AA3 3588 SD3 35.0 93.6 465 30 1200 326T 460 SD100 IEEE841 1LE24213AC212AA3 6022 SD3 39.0 93.0 675 30 900 364T 460 SD100 IEEE841 1LE24213CD112AA3 9453 SD3 47.0 91.7 740 40 3600 324TS 460 SD100 IEEE841 1LE24213BA112AA3 4978 SD3 45.0 93.6 575 40 1800 324T 460 SD100 IEEE841 1LE24213AB112AA3 4767 SD3 46.0 94.1 666 40 1800 324TS 460 SD100 IEEE841 1LE24213BB112AA3 4767 SD3 46.0 94.1 666 40 1200 364T 460 SD100 IEEE841 1LE24213CC112AA3 8160 SD3 49.0 94.1 863 40 900 365T 460 SD100 IEEE841 1LE24213CD212AA3 11428 SD3 63.0 91.7 840 50 3600 326TS 460 SD100 IEEE841 1LE24213BA212AA3 6328 SD3 55.0 93.6 610 50 1800 326T 460 SD100 IEEE841 1LE24213AB212AA3 5803 SD3 58.0 94.5 700 50 1800 326TS 460 SD100 IEEE841 1LE24213BB212AA3 5803 SD3 58.0 94.5 700 50 1200 365T 460 SD100 IEEE841 1LE24213CC212AA3 9287 SD3 62.0 94.1 900 50 900 404T 460 SD100 IEEE841 1LE24214AD112AA3 13302 SD3 67.0 92.4 1116 60 3600 364TS 460 SD100 IEEE841 1LE24213DA112AA3 8398 SD3 68.0 93.6 717 60 1800 364T 460 SD100 IEEE841 1LE24213CB112AA3 8253 SD3 68.0 95.0 930 60 1800 364TS 460 SD100 IEEE841 1LE24213DB112AA3 8253 SD3 68.0 95.0 930 60 1200 404T 460 SD100 IEEE841 1LE24214AC112AA3 10599 SD3 74.0 94.5 1100 405T 460 SD100 IEEE841 1LE24214AD212AA3 14927 SD3 78.0 92.4 1182 3600 365TS 460 SD100 IEEE841 1LE24213DA212AA3 10545 SD3 86.0 94.1 815 75 1800 365T 460 SD100 IEEE841 1LE24213CB212AA3 10279 SD3 85.0 95.4 1000 75 1800 365TS 460 SD100 IEEE841 1LE24213DB212AA3 10279 SD3 85.0 95.4 1000 75 1200 405T 460 SD100 IEEE841 1LE24214AC212AA3 12368 SD3 93.0 94.5 1150 75 900 444T 460 SD100 IEEE841 1LE24214CD112AA3 20456 SD3 94.0 93.6 1525 75 900 444TS 460 SD100 IEEE841 1LE24214DD112AA3 19848 SD3 94.0 93.6 1525 75 900 444T 460 SD100 IEEE841 1LE24214ED112AA3 19848 SD3 94.0 93.6 1525 Typical Performance Data 900 75 Options Selection and Pricing 60 Special Features Detail 326T 3600 Definite Purpose Motors 900 30 Hazardous Duty Motors 25 Severe Duty Motors 25 25 Stock General Purpose Motors SD100 IEEE841 (Cast iron frame) Introduction SIMOTICS Severe duty motors General Dimensions Stock availability subject to change. 900 RPM Motors meet or exceed EPAct efficiency. Prices and Specifications are subject to change without notice. DOE#CC032A 2014 Low Voltage AC Motors Selection and Pricing Guide 2-35 Part Number Index NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. Shaded ratings indicated roller bearings. SIMOTICS Severe duty motors SD100 IEEE841 (Cast iron frame) NEMA Premium® Die cast aluminum rotor 460V 60Hz – Foot mounted Part Number List Price $ Mult. Symb. FL Amps FL Nom Eff. (%) Lbs SD100 IEEE841 1LE24214BA212AA3 14007 SD3 108.0 94.1 1100 SD100 IEEE841 1LE24214AB212AA3 12699 SD3 113.0 95.4 1160 SD100 IEEE841 1LE24214BB212AA3 12699 SD3 113.0 95.4 1160 SD100 IEEE841 1LE24214CC112AA3 17662 SD3 117.0 95.0 1545 SD100 IEEE841 1LE24214DC112AA3 17054 SD3 117.0 95.0 1545 SD100 IEEE841 1LE24214EC112AA3 17054 SD3 117.0 95.0 1545 SD100 IEEE841 1LE24214CD212AA3 24930 SD3 123.0 94.1 1697 460 SD100 IEEE841 1LE24214DD212AA3 24322 SD3 123.0 94.1 1697 460 SD100 IEEE841 1LE24214ED212AA3 24322 SD3 123.0 94.1 1697 HP RPM Frame Voltage Type 100 3600 405TS 460 100 1800 405T 460 100 1800 405TS 460 100 1200 444T 460 100 1200 444TS 460 100 1200 444T 460 100 900 445T 460 100 900 445TS 100 900 445T 125 3600 444TS 460 SD100 IEEE841 1LE24214DA112AA3 17992 SD3 140.0 95.0 1454 125 1800 444T 460 SD100 IEEE841 1LE24214CB112AA3 17178 SD3 143.0 95.4 1600 125 1800 444TS 460 SD100 IEEE841 1LE24214DB112AA3 16570 SD3 143.0 95.4 1600 125 1800 444T 460 SD100 IEEE841 1LE24214EB112AA3 16570 SD3 143.0 95.4 1600 125 1200 445T 460 SD100 IEEE841 1LE24214CC212AA3 21185 SD3 144.0 95.0 1720 125 1200 445TS 460 SD100 IEEE841 1LE24214DC212AA3 20577 SD3 144.0 95.0 1720 125 1200 445T 460 SD100 IEEE841 1LE24214EC212AA3 20577 SD3 144.0 95.0 1720 125 900 447T 460 SD100 IEEE841 1LE24214CD312AA3 25592 SD3 152.0 94.1 2018 125 900 447TS 460 SD100 IEEE841 1LE24214DD312AA3 24984 SD3 152.0 94.1 2018 125 900 447T 460 SD100 IEEE841 1LE24214ED312AA3 24984 SD3 152.0 94.1 2018 150 3600 445TS 460 SD100 IEEE841 1LE24214DA212AA3 21035 SD3 162.0 95.0 1615 150 1800 445T 460 SD100 IEEE841 1LE24214CB212AA3 19350 SD3 170.0 95.8 1710 150 1800 445TS 460 SD100 IEEE841 1LE24214DB212AA3 18742 SD3 170.0 95.8 1710 150 1800 445T 460 SD100 IEEE841 1LE24214EB212AA3 18742 SD3 170.0 95.8 1710 150 1200 447T 460 SD100 IEEE841 1LE24214CC312AA3 23210 SD3 172.0 95.8 1995 150 1200 447TS 460 SD100 IEEE841 1LE24214DC312AA3 22602 SD3 172.0 95.8 1995 150 1200 447T 460 SD100 IEEE841 1LE24214EC312AA3 22602 SD3 172.0 95.8 1995 150 900 449T 460 SD100 IEEE841 1LE24214CD512AA3 32553 SD3 180.0 94.1 2480 150 900 449TS 460 SD100 IEEE841 1LE24214DD512AA3 31945 SD3 180.0 94.1 2480 150 900 449T 460 SD100 IEEE841 1LE24214ED512AA3 31945 SD3 180.0 94.1 2480 200 3600 447TS 460 SD100 IEEE841 1LE24214DA312AA3 26380 SD3 220.0 95.4 1890 200 1800 447T 460 SD100 IEEE841 1LE24214CB312AA3 23404 SD3 226.0 96.2 2035 200 1800 447TS 460 SD100 IEEE841 1LE24214DB312AA3 22796 SD3 226.0 96.2 2035 200 1800 447T 460 SD100 IEEE841 1LE24214EB312AA3 22796 SD3 226.0 96.2 2035 200 1200 449T 460 SD100 IEEE841 1LE24214CC512AA3 28021 SD3 227.0 95.8 2425 200 1200 449TS 460 SD100 IEEE841 1LE24214DC512AA3 27413 SD3 227.0 95.8 2425 200 1200 449T 460 SD100 IEEE841 1LE24214EC512AA3 27413 SD3 227.0 95.8 2425 200 900 S449LS 460 SD100 IEEE841 1LE24214FD112AA3 46134 SD3 240.0 94.5 3200 NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. Shaded ratings indicated roller bearings. 2-36 2014 Low Voltage AC Motors Selection and Pricing Guide Stock Stock availability subject to change. 900 RPM Motors meet or exceed EPAct efficiency. Prices and Specifications are subject to change without notice. DOE#CC032A NEMA Premium® Die cast aluminum rotor 460V 60Hz – Foot mounted HP RPM Frame Voltage Type Part Number List Price $ Mult. Symb. FL Amps FL Nom Eff. (%) Lbs 3600 449TS 460 SD100 IEEE841 1LE24214DA512AA3 33581 SD3 261.0 95.8 2272 1800 449T 2) 460 SD100 IEEE841 1LE24214CB512AA3 29498 SD3 278.0 96.2 2425 250 1800 449TS 2) 1LE24214DB512AA3 28890 SD3 278.0 96.2 2425 460 SD100 IEEE841 2) 1800 449T 460 SD100 IEEE841 1LE24214EB512AA3 28890 SD3 278.0 96.2 2425 250 1200 449T 2) 460 SD100 IEEE841 1LE24214CC612AA3 30733 SD3 281.0 95.8 2390 250 1200 449TS 2) 460 SD100 IEEE841 1LE24214DC612AA3 30125 SD3 281.0 95.8 2390 250 1200 449T 2) 460 SD100 IEEE841 1LE24214EC612AA3 30125 SD3 281.0 95.8 2390 250 900 S449LS 460 SD100 IEEE841 1LE24214FD212AA3 50486 SD3 303 94.5 3220 300 3600 449TS 460 SD100 IEEE841 1LE24214DA612AA3 42635 SD3 312.0 95.8 2200 300 1800 S449LS 1) 460 SD100 IEEE841 1LE24214FB112AA3 39785 SD3 334.0 96.2 3130 300 1800 S449SS 1) 460 SD100 IEEE841 1LE24214GB112AA3 39177 SD3 334.0 96.2 3130 1200 S449LS 460 SD100 IEEE841 1LE24214FC112AA3 52950 SD3 340.0 95.8 3240 300 1200 S449SS 2) 460 SD100 IEEE841 1LE24214GC112AA3 52342 SD3 340.0 95.8 3240 350 3600 S449SS 1) 460 SD100 IEEE841 1LE24214GA112AA3 51006 SD3 370.0 95.8 2890 350 1800 S449LS 1) 460 SD100 IEEE841 1LE24214FB212AA3 47844 SD3 390.0 96.2 3190 350 1800 S449SS 1) 460 SD100 IEEE841 1LE24214GB212AA3 47236 SD3 390.0 96.2 3190 400 3600 S449SS1) 460 SD100 IEEE841 1LE24214GA312AA3 57207 SD3 422.0 95.8 3065 400 1800 S449LS 1) 460 SD100 IEEE841 1LE24214FB312AA3 53594 SD3 454.0 96.2 3240 1800 1) 460 SD100 IEEE841 1LE24214GB312AA3 52986 SD3 454.0 96.2 3240 400 S449SS Definite Purpose Motors 300 2) Hazardous Duty Motors 250 Severe Duty Motors 250 250 Stock General Purpose Motors SD100 IEEE841 (Cast iron frame) Introduction SIMOTICS Severe duty motors Special Features Detail Options Selection and Pricing Typical Performance Data General Dimensions 1) CW Rotation facing opposite DE 2) NEMA design A 900 RPM Motors meet or exceed EPAct efficiency. Prices and Specifications are subject to change without notice. DOE#CC032A 2014 Low Voltage AC Motors Selection and Pricing Guide 2-37 Part Number Index NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. Shaded ratings indicated roller bearings. Stock availability subject to change. SIMOTICS Severe duty motors SD100 IEEE841 (Cast iron frame) NEMA Premium® Die cast aluminum rotor 460V 60Hz – C-face footless HP RPM Frame Voltage Type Part Number List Price $ Mult. Symb. FL Amps FL Nom Eff. (%) Lbs 1 3600 143TC 460 SD100 IEEE841 1LE24211AA112GA3 877 SD3 1.4 82.5 75 1 1800 143TC 460 SD100 IEEE841 1LE24211AB212GA3 852 SD3 1.4 85.5 76 1.5 3600 143TC 460 SD100 IEEE841 1LE24211AA212GA3 878 SD3 2.0 84.0 70 1.5 1800 145TC 460 SD100 IEEE841 1LE24211AB312GA3 912 SD3 2.1 86.5 80 2 3600 145TC 460 SD100 IEEE841 1LE24211AA312GA3 994 SD3 2.5 85.5 72 2 1800 145TC 460 SD100 IEEE841 1LE24211AB412GA3 968 SD3 2.8 86.5 80 3 3600 182TC 460 SD100 IEEE841 1LE24211CA112GA3 1079 SD3 3.8 86.5 107 3 1800 182TC 460 SD100 IEEE841 1LE24211CB112GA3 1039 SD3 4.0 89.5 118 5 3600 184TC 460 SD100 IEEE841 1LE24211CA312GA3 1291 SD3 6.0 88.5 118 5 1800 184TC 460 SD100 IEEE841 1LE24211CB312GA3 1171 SD3 6.5 89.5 124 7.5 3600 213TC 460 SD100 IEEE841 1LE24212AA112GA3 1553 SD3 8.8 89.5 160 191 7.5 1800 213TC 460 SD100 IEEE841 1LE24212AB112GA3 1512 SD3 9.7 91.7 10 3600 215TC 460 SD100 IEEE841 1LE24212AA212GA3 1766 SD3 11.5 90.2 174 10 1800 215TC 460 SD100 IEEE841 1LE24212AB212GA3 1784 SD3 12.5 91.7 197 15 3600 254TC 460 SD100 IEEE841 1LE24212BA112GA3 2396 SD3 17.5 91.0 287 15 1800 254TC 460 SD100 IEEE841 1LE24212BB112GA3 2357 SD3 19.0 92.4 289 20 3600 256TC 460 SD100 IEEE841 1LE24212BA212GA3 2900 SD3 22.5 91.0 323 20 1800 256TC 460 SD100 IEEE841 1LE24212BB212GA3 2986 SD3 25.0 93.0 322 NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. 2-38 2014 Low Voltage AC Motors Selection and Pricing Guide Stock Stock availability subject to change. Prices and Specifications are subject to change without notice. DOE#CC032A NEMA Premium® Die cast copper rotor 460V 60Hz – Foot mounted RPM Frame Voltage Type Part Number List Price $ Mult. Symb. FL Amps FL Nom Eff. (%) Lbs 1 1800 143T 460 SD100 IEEE841 1LE24111AB212AA3 886 SD3 1.5 86.5 81 1 1200 145T 460 SD100 IEEE841 1LE24111AC312AA3 1044 SD3 1.6 84.0 81 1.5 3600 143T 460 SD100 IEEE841 1LE24111AA212AA3 917 SD3 1.9 87.5 80 460 SD100 IEEE841 1LE24111AB312AA3 955 SD3 2.1 87.5 81 145T 460 SD100 IEEE841 1LE24111AA312AA3 1051 SD3 2.6 88.5 80 2 1800 145T 460 SD100 IEEE841 1LE24111AB412AA3 1023 SD3 2.8 87.5 81 3 3600 182T 460 SD100 IEEE841 1LE24111CA112AA3 1102 SD3 3.8 89.5 121 3 1800 182T 460 SD100 IEEE841 1LE24111CB112AA3 1056 SD3 4.0 90.2 125 3 1200 213T 460 SD100 IEEE841 1LE24112AC112AA3 1571 SD3 4.3 90.2 170 5 3600 184T 460 SD100 IEEE841 1LE24111CA312AA3 1348 SD3 6.2 90.2 123 5 1800 184T 460 SD100 IEEE841 1LE24111CB312AA3 1209 SD3 6.7 90.2 129 5 1200 215T 460 SD100 IEEE841 1LE24112AC212AA3 2077 SD3 7.0 90.2 184 7.5 3600 213T 460 SD100 IEEE841 1LE24112AA112AA3 1653 SD3 8.5 91.7 191 7.5 1800 213T 460 SD100 IEEE841 1LE24112AB112AA3 1605 SD3 9.5 92.4 198 7.5 1200 254T 460 SD100 IEEE841 1LE24112BC112AA3 2656 SD3 10.5 92.4 336 10 3600 215T 460 SD100 IEEE841 1LE24112AA212AA3 1900 SD3 11.5 91.7 196 10 1800 215T 460 SD100 IEEE841 1LE24112AB212AA3 1922 SD3 12.5 92.4 206 10 1200 256T 460 SD100 IEEE841 1LE24112BC212AA3 3305 SD3 13.5 92.4 337 15 3600 254T 460 SD100 IEEE841 1LE24112BA112AA3 2577 SD3 17.0 92.4 309 15 1800 254T 460 SD100 IEEE841 1LE24112BB112AA3 2531 SD3 19.0 93.0 297 20 3600 256T 460 SD100 IEEE841 1LE24112BA212AA3 3164 SD3 22.5 92.4 333 20 1800 256T 460 SD100 IEEE841 1LE24112BB212AA3 3263 SD3 25.0 93.6 341 Special Features Detail 145T 3600 Definite Purpose Motors 1800 2 Hazardous Duty Motors 1.5 Stock Severe Duty Motors HP General Purpose Motors SD100 IEEE841 (Cast iron frame) Introduction SIMOTICS Severe duty motors Options Selection and Pricing Typical Performance Data General Dimensions Stock availability subject to change. Prices and Specifications are subject to change without notice. DOE#CC032A 2014 Low Voltage AC Motors Selection and Pricing Guide 2-39 Part Number Index NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. SIMOTICS Severe duty motors SD100 IEEE841 (Cast iron frame) NEMA Premium® Die cast aluminum rotor 575V 60Hz – Foot mounted HP RPM Frame Voltage Type Part Number List Price $ Mult. Symb. FL Amps FL Nom Eff. (%) Lbs 1 3600 143T 575 SD100 IEEE841 1LE24211AA113AA3 787 SD3 1.1 82.5 75 1 1800 143T 575 SD100 IEEE841 1LE24211AB213AA3 762 SD3 1.1 85.5 76 1 1200 145T 575 SD100 IEEE841 1LE24211AC313AA3 898 SD3 1.3 82.5 77 1 900 182T 575 SD100 IEEE841 1LE24211CD113AA3 1457 SD3 1.7 81.5 106 1.5 3600 143T 575 SD100 IEEE841 1LE24211AA213AA3 788 SD3 1.6 84.0 70 1.5 1800 145T 575 SD100 IEEE841 1LE24211AB313AA3 822 SD3 1.7 86.5 80 1.5 1200 182T 575 SD100 IEEE841 1LE24211CC113AA3 1006 SD3 1.9 87.5 113 1.5 900 184T 575 SD100 IEEE841 1LE24211CD313AA3 1719 SD3 2.4 82.5 119 2 3600 145T 575 SD100 IEEE841 1LE24211AA313AA3 904 SD3 2.0 85.5 72 2 1800 145T 575 SD100 IEEE841 1LE24211AB413AA3 878 SD3 2.2 86.5 80 2 1200 184T 575 SD100 IEEE841 1LE24211CC313AA3 1071 SD3 2.6 88.5 122 2 900 213T 575 SD100 IEEE841 1LE24212AD113AA3 2023 SD3 2.6 84.0 145 3 3600 182T 575 SD100 IEEE841 1LE24211CA113AA3 947 SD3 3.0 86.5 107 3 1800 182T 575 SD100 IEEE841 1LE24211CB113AA3 907 SD3 3.2 89.5 118 3 1200 213T 575 SD100 IEEE841 1LE24212AC113AA3 1350 SD3 3.4 89.5 164 3 900 215T 575 SD100 IEEE841 1LE24212AD213AA3 2565 SD3 3.9 85.5 160 5 3600 184T 575 SD100 IEEE841 1LE24211CA313AA3 1159 SD3 4.8 88.5 118 5 1800 184T 575 SD100 IEEE841 1LE24211CB313AA3 1039 SD3 5.2 89.5 124 5 1200 215T 575 SD100 IEEE841 1LE24212AC213AA3 1787 SD3 5.4 89.5 176 5 900 254T 575 SD100 IEEE841 1LE24212BD113AA3 3428 SD3 7.0 86.5 247 7.5 3600 213T 575 SD100 IEEE841 1LE24212AA113AA3 1421 SD3 7.0 89.5 160 7.5 1800 213T 575 SD100 IEEE841 1LE24212AB113AA3 1380 SD3 7.8 91.7 191 7.5 1200 254T 575 SD100 IEEE841 1LE24212BC113AA3 2284 SD3 8.0 91.0 292 7.5 900 256T 575 SD100 IEEE841 1LE24212BD213AA3 4297 SD3 10.5 87.5 279 10 3600 215T 575 SD100 IEEE841 1LE24212AA213AA3 1634 SD3 9.2 90.2 174 10 1800 215T 575 SD100 IEEE841 1LE24212AB213AA3 1652 SD3 10.0 91.7 197 10 1200 256T 575 SD100 IEEE841 1LE24212BC213AA3 2840 SD3 11.0 91.0 288 10 900 284T 575 SD100 IEEE841 1LE24212CD113AA3 4398 SD3 12.0 90.2 362 15 3600 254T 575 SD100 IEEE841 1LE24212BA113AA3 2216 SD3 14.0 91.0 287 15 1800 254T 575 SD100 IEEE841 1LE24212BB113AA3 2177 SD3 15.0 92.4 289 15 1200 284T 575 SD100 IEEE841 1LE24212CC113AA3 3541 SD3 17.0 91.7 400 15 900 286T 575 SD100 IEEE841 1LE24212CD213AA3 5623 SD3 18.4 90.2 420 20 3600 256T 575 SD100 IEEE841 1LE24212BA213AA3 2720 SD3 18.0 91.0 323 20 1800 256T 575 SD100 IEEE841 1LE24212BB213AA3 2806 SD3 20.0 93.0 322 20 1200 286T 575 SD100 IEEE841 1LE24212CC213AA3 4316 SD3 21.5 91.7 465 20 900 324T 575 SD100 IEEE841 1LE24213AD113AA3 6875 SD3 25 91.0 570 Stock NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. Stock availability subject to change. 2-40 2014 Low Voltage AC Motors Selection and Pricing Guide 900 RPM Motors meet or exceed EPAct efficiency. Prices and Specifications are subject to change without notice. DOE#CC032A NEMA Premium® Die cast aluminum rotor 575V 60Hz – Foot mounted RPM Frame Voltage Type Part Number List Price $ Mult. Symb. FL Amps FL Nom Eff. (%) Lbs 25 3600 284TS 575 SD100 IEEE841 1LE24212DA113AA3 3231 SD3 23.0 91.7 415 25 1800 284T 575 SD100 IEEE841 1LE24212CB113AA3 3086 SD3 24.0 93.6 445 25 1800 284TS 575 SD100 IEEE841 1LE24212DB113AA3 3086 SD3 24.0 93.6 445 25 1200 324T 575 SD100 IEEE841 1LE24213AC113AA3 5227 SD3 26.0 93.0 640 326T 575 SD100 IEEE841 1LE24213AD213AA3 7986 SD3 32.8 90.2 582 286TS 575 SD100 IEEE841 1LE24212DA213AA3 3775 SD3 27.0 91.7 430 30 1800 286T 575 SD100 IEEE841 1LE24212CB213AA3 3588 SD3 28.0 93.6 465 30 1800 286TS 575 SD100 IEEE841 1LE24212DB213AA3 3588 SD3 28.0 93.6 465 30 1200 326T 575 SD100 IEEE841 1LE24213AC213AA3 6022 SD3 31.0 93.0 675 30 900 364T 575 SD100 IEEE841 1LE24213CD113AA3 9453 SD3 37.6 91.7 740 40 3600 324TS 575 SD100 IEEE841 1LE24213BA113AA3 4978 SD3 36.0 93.6 575 40 1800 324T 575 SD100 IEEE841 1LE24213AB113AA3 4767 SD3 37.0 94.1 666 40 1800 324TS 575 SD100 IEEE841 1LE24213BB113AA3 4767 SD3 37.0 94.1 666 40 1200 364T 575 SD100 IEEE841 1LE24213CC113AA3 8160 SD3 39.0 94.1 863 40 900 365T 575 SD100 IEEE841 1LE24213CD213AA3 11428 SD3 50.4 91.7 840 50 3600 326TS 575 SD100 IEEE841 1LE24213BA213AA3 6328 SD3 44.0 93.6 610 50 1800 326T 575 SD100 IEEE841 1LE24213AB213AA3 5803 SD3 46.0 94.5 700 50 1800 326TS 575 SD100 IEEE841 1LE24213BB213AA3 5803 SD3 46.0 94.5 700 50 1200 365T 575 SD100 IEEE841 1LE24213CC213AA3 9287 SD3 50.0 94.1 900 404T 575 SD100 IEEE841 1LE24214AD113AA3 13302 SD3 53.6 92.4 1116 364TS 575 SD100 IEEE841 1LE24213DA113AA3 8398 SD3 54.5 93.6 717 60 1800 364T 575 SD100 IEEE841 1LE24213CB113AA3 8253 SD3 54.5 95.0 930 60 1800 364TS 575 SD100 IEEE841 1LE24213DB113AA3 8253 SD3 54.5 95.0 930 60 1200 404T 575 SD100 IEEE841 1LE24214AC113AA3 10599 SD3 59.0 94.5 1100 60 900 405T 575 SD100 IEEE841 1LE24214AD213AA3 14927 SD3 62.4 92.4 1182 75 3600 365TS 575 SD100 IEEE841 1LE24213DA213AA3 10545 SD3 69.0 94.1 815 75 1800 365T 575 SD100 IEEE841 1LE24213CB213AA3 10279 SD3 68.0 95.4 1000 75 1800 365TS 575 SD100 IEEE841 1LE24213DB213AA3 10279 SD3 68.0 95.4 1000 75 1200 405T 575 SD100 IEEE841 1LE24214AC213AA3 12368 SD3 75.0 94.5 1150 75 900 444T 575 SD100 IEEE841 1LE24214CD113AA3 20456 SD3 75.2 93.6 1525 75 900 444TS 575 SD100 IEEE841 1LE24214DD113AA3 19848 SD3 75.2 93.6 1525 75 900 444T 575 SD100 IEEE841 1LE24214ED113AA3 24322 SD3 75.2 93.6 1525 Options Selection and Pricing 900 3600 Special Features Detail 50 60 Definite Purpose Motors 900 3600 Hazardous Duty Motors 25 30 Stock Severe Duty Motors HP General Purpose Motors SD100 IEEE841 (Cast iron frame) Introduction SIMOTICS Severe duty motors Typical Performance Data General Dimensions Stock availability subject to change. 900 RPM Motors meet or exceed EPAct efficiency. Prices and Specifications are subject to change without notice. DOE#CC032A 2014 Low Voltage AC Motors Selection and Pricing Guide 2-41 Part Number Index NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. Shaded ratings indicated roller bearings. SIMOTICS Severe duty motors SD100 IEEE841 (Cast iron frame) NEMA Premium® Die cast aluminum rotor 575V 60Hz – Foot mounted HP RPM Frame Voltage Type Part Number List Price $ Mult. Symb. FL Amps FL Nom Eff. (%) Lbs 100 3600 405TS 575 SD100 IEEE841 1LE24214BA213AA3 14007 SD3 87.0 94.1 1100 100 1800 405T 575 SD100 IEEE841 1LE24214AB213AA3 12699 SD3 90.5 95.4 1160 100 1800 405TS 575 SD100 IEEE841 1LE24214BB213AA3 12699 SD3 90.5 95.4 1160 100 1200 444T 575 SD100 IEEE841 1LE24214CC113AA3 17662 SD3 94.0 95.0 1545 100 1200 444TS 575 SD100 IEEE841 1LE24214DC113AA3 17054 SD3 94.0 95.0 1545 100 1200 444T 575 SD100 IEEE841 1LE24214EC113AA3 17054 SD3 94.0 95.0 1545 100 900 445T 575 SD100 IEEE841 1LE24214CD213AA3 24930 SD3 98.4 94.1 1697 100 900 445TS 575 SD100 IEEE841 1LE24214DD213AA3 24322 SD3 98.4 94.1 1697 100 900 445T 575 SD100 IEEE841 1LE24214ED213AA3 24322 SD3 98.4 94.1 1697 125 3600 444TS 575 SD100 IEEE841 1LE24214DA113AA3 17992 SD3 112.0 95.0 1454 125 1800 444T 575 SD100 IEEE841 1LE24214CB113AA3 17178 SD3 115.0 95.4 1600 125 1800 444TS 575 SD100 IEEE841 1LE24214DB113AA3 16570 SD3 115.0 95.4 1600 125 1800 444T 575 SD100 IEEE841 1LE24214EB113AA3 16570 SD3 115.0 95.4 1600 125 1200 445T 575 SD100 IEEE841 1LE24214CC213AA3 21185 SD3 115.0 95.0 1720 125 1200 445TS 575 SD100 IEEE841 1LE24214DC213AA3 20577 SD3 115.0 95.0 1720 125 1200 445T 575 SD100 IEEE841 1LE24214EC213AA3 20577 SD3 115.0 95.0 1720 125 900 447T 575 SD100 IEEE841 1LE24214CD313AA3 25592 SD3 121.6 94.1 2018 125 900 447TS 575 SD100 IEEE841 1LE24214DD313AA3 24984 SD3 121.6 94.1 2018 125 900 447T 575 SD100 IEEE841 1LE24214ED313AA3 24984 SD3 121.6 94.1 2018 150 3600 445TS 575 SD100 IEEE841 1LE24214DA213AA3 21035 SD3 130.0 95.0 1615 150 1800 445T 575 SD100 IEEE841 1LE24214CB213AA3 19350 SD3 136.0 95.8 1710 150 1800 445TS 575 SD100 IEEE841 1LE24214DB213AA3 18742 SD3 136.0 95.8 1710 150 1800 445T 575 SD100 IEEE841 1LE24214EB213AA3 18742 SD3 136.0 95.8 1710 150 1200 447T 575 SD100 IEEE841 1LE24214CC313AA3 23210 SD3 138.0 95.8 1995 150 1200 447TS 575 SD100 IEEE841 1LE24214DC313AA3 22602 SD3 138.0 95.8 1995 150 1200 447T 575 SD100 IEEE841 1LE24214EC313AA3 22602 SD3 138.0 95.8 1995 150 900 449T 575 SD100 IEEE841 1LE24214CD513AA3 32553 SD3 144.0 94.1 2480 150 900 449TS 575 SD100 IEEE841 1LE24214DD513AA3 31945 SD3 144.0 94.1 2480 150 900 449T 575 SD100 IEEE841 1LE24214ED513AA3 31945 SD3 144.0 94.1 2480 200 3600 447TS 575 SD100 IEEE841 1LE24214DA313AA3 26380 SD3 176.0 95.4 1890 200 1800 447T 575 SD100 IEEE841 1LE24214CB313AA3 23404 SD3 181.0 96.2 2035 200 1800 447TS 575 SD100 IEEE841 1LE24214DB313AA3 22796 SD3 181.0 96.2 2035 200 1800 447T 575 SD100 IEEE841 1LE24214EB313AA3 22796 SD3 181.0 96.2 2035 200 1200 449T 575 SD100 IEEE841 1LE24214CC513AA3 28021 SD3 182.0 95.8 2425 200 1200 449TS 575 SD100 IEEE841 1LE24214DC513AA3 27413 SD3 182.0 95.8 2425 200 1200 449T 575 SD100 IEEE841 1LE24214EC513AA3 27413 SD3 182.0 95.8 2425 200 900 S449LS 575 SD100 IEEE841 1LE24214FD113AA3 46134 SD3 192.0 94.5 3200 Stock NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. Shaded ratings indicated roller bearings. 2-42 2014 Low Voltage AC Motors Selection and Pricing Guide Stock availability subject to change. 900 RPM Motors meet or exceed EPAct efficiency. Prices and Specifications are subject to change without notice. DOE#CC032A NEMA Premium® Die cast aluminum rotor 575V 60Hz – Foot mounted RPM Frame Voltage Type Part Number List Price $ Mult. Symb. FL Amps FL Nom Eff. (%) Lbs 250 3600 449TS 575 SD100 IEEE841 1LE24214DA513AA3 33581 SD3 209.0 95.8 2272 250 1800 449T 2) 575 SD100 IEEE841 1LE24214CB513AA3 29498 SD3 223.0 96.2 2425 2425 2) 250 1800 449TS 575 SD100 IEEE841 1LE24214DB513AA3 28890 SD3 223.0 96.2 250 1800 449T 2) 575 SD100 IEEE841 1LE24214EB513AA3 28890 SD3 223.0 96.2 2425 250 1200 449T 2) 575 SD100 IEEE841 1LE24214CC613AA3 30733 SD3 225.0 95.8 2390 250 1200 449TS 2) 1LE24214DC613AA3 30125 SD3 225.0 95.8 2390 575 SD100 IEEE841 2) 449T 575 SD100 IEEE841 1LE24214EC613AA3 30125 SD3 225.0 95.8 2390 900 S449LS 575 SD100 IEEE841 1LE24214FD213AA3 50486 SD3 242.4 94.5 3220 300 3600 449TS 575 SD100 IEEE841 1LE24214DA613AA3 42635 SD3 250.0 95.8 2200 300 1800 S449LS 1) 2) 575 SD100 IEEE841 1LE24214FB113AA3 39785 SD3 268.0 96.2 3130 300 1800 S449SS 1) 2) 575 SD100 IEEE841 1LE24214GB113AA3 39177 SD3 268.0 96.2 3130 300 1200 S449LS 2) 575 SD100 IEEE841 1LE24214FC113AA3 52950 SD3 272.0 95.8 3240 300 1200 S449SS 2) 575 SD100 IEEE841 1LE24214GC113AA3 52342 SD3 272.0 95.8 3240 350 3600 S449SS 1) 575 SD100 IEEE841 1LE24214GA113AA3 51006 SD3 296.0 95.8 2890 350 1800 S449LS 1) 575 SD100 IEEE841 1LE24214FB213AA3 47844 SD3 312.0 96.2 3190 350 1800 S449SS 1) 575 SD100 IEEE841 1LE24214GB213AA3 47236 SD3 312.0 96.2 3190 400 3600 S449SS 1) 575 SD100 IEEE841 1LE24214GA313AA3 57207 SD3 338.0 95.8 3065 400 1800 S449LS 1) 575 SD100 IEEE841 1LE24214FB313AA3 53594 SD3 363.0 96.2 3240 400 1800 S449SS 1) 575 SD100 IEEE841 1LE24214GB313AA3 52986 SD3 363.0 96.2 3240 Definite Purpose Motors 1200 Hazardous Duty Motors 250 250 Stock Severe Duty Motors HP General Purpose Motors SD100 IEEE841 (Cast iron frame) Introduction SIMOTICS Severe duty motors Special Features Detail Options Selection and Pricing Typical Performance Data General Dimensions 1) CW Rotation facing opposite DE 2) NEMA design A 900 RPM Motors meet or exceed EPAct efficiency. Prices and Specifications are subject to change without notice. DOE#CC032A 2014 Low Voltage AC Motors Selection and Pricing Guide 2-43 Part Number Index NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. Shaded ratings indicated roller bearings. Stock availability subject to change. SIMOTICS Severe duty motors SD100 IEEE841 (Cast iron frame) NEMA Premium® Die cast aluminum rotor 575V 60Hz – C-face footless HP RPM Frame Voltage Type Part Number List Price $ Mult. Symb. FL Amps FL Nom Eff. (%) Lbs 1 3600 143TC 575 SD100 IEEE841 1LE24211AA113GA3 877 SD3 1.1 82.5 75 1 1800 143TC 575 SD100 IEEE841 1LE24211AB213GA3 852 SD3 1.1 85.5 76 1.5 3600 143TC 575 SD100 IEEE841 1LE24211AA213GA3 878 SD3 1.6 84.0 70 1.5 1800 145TC 575 SD100 IEEE841 1LE24211AB313GA3 912 SD3 1.7 86.5 80 2 3600 145TC 575 SD100 IEEE841 1LE24211AA313GA3 994 SD3 2.0 85.5 72 2 1800 145TC 575 SD100 IEEE841 1LE24211AB413GA3 968 SD3 2.2 86.5 80 3 3600 182TC 575 SD100 IEEE841 1LE24211CA113GA3 1079 SD3 3.0 86.5 107 3 1800 182TC 575 SD100 IEEE841 1LE24211CB113GA3 1039 SD3 3.2 89.5 118 5 3600 184TC 575 SD100 IEEE841 1LE24211CA313GA3 1291 SD3 4.8 88.5 118 5 1800 184TC 575 SD100 IEEE841 1LE24211CB313GA3 1171 SD3 5.2 89.5 124 7.5 3600 213TC 575 SD100 IEEE841 1LE24212AA113GA3 1553 SD3 7.0 89.5 160 7.5 1800 213TC 575 SD100 IEEE841 1LE24212AB113GA3 1512 SD3 7.8 91.7 191 10 3600 215TC 575 SD100 IEEE841 1LE24212AA213GA3 1766 SD3 9.2 90.2 174 10 1800 215TC 575 SD100 IEEE841 1LE24212AB213GA3 1784 SD3 10.0 91.7 197 15 3600 254TC 575 SD100 IEEE841 1LE24212BA113GA3 2396 SD3 14.0 91.0 287 15 1800 254TC 575 SD100 IEEE841 1LE24212BB113GA3 2357 SD3 15.0 92.4 289 20 3600 256TC 575 SD100 IEEE841 1LE24212BA213GA3 2900 SD3 18.0 91.0 323 20 1800 256TC 575 SD100 IEEE841 1LE24212BB213GA3 2986 SD3 20.0 93.0 322 NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. 2-44 2014 Low Voltage AC Motors Selection and Pricing Guide Stock Stock availability subject to change. Prices and Specifications are subject to change without notice. DOE#CC032A Introduction SIMOTICS Severe Duty motors SD661 General Purpose Motors ® C US HP Range 5 YEAR ee WARRANTY Frame Size 5-75 HP 180T-360T NEMA Premium ® 143T-S449 3 phase 60Hz 5-75HP 5-75HP NEMA design B NEMA MG1 Part 31 1.15 Class B @ 1.0SF Class F @ 1.15SF Cast iron Casted T Drains Two on lowest point in frame C1045 DE & NDE Severe Duty Motors SD661severe duty/IEEE 841 TEFC motors are available in NEMA Premium® efficiency with our die cast aluminum rotor design (184T-365T). They also exceed IEEE Std 841TM-2009 standards for high performance, rugged construction and long service life, for the most demanding industrial applications. Also build in compliance with the requirements of API661 standard by incorporating roller bearings on frames 210-360 making them ideal for use for heavy belt driven heat exchangers applications in petro/chemical applications. Efficiency 460 V 575 V Insulation Frame 8 hole feet Condensation drains High strength carbon steel shaft Inpro/Seal® Bearing Isolator - IP56 Definite Purpose Motors Insulation Class F Service Factor @ 40ºC Temperature rise (Sine wave) Hazardous Duty Motors Voltage 1) Stator/Windings Rotor Cast iron Neoprene gasket Random wound copper 180T-360T Oversized 180T-360T 180T-360T Single shielded Bearing housing Grease Inlet / relief fittings 180T-360T Cast iron Bearing caps Polyurea base Alemite / pressure (auto) Cast Iron Bidirectional fan Nameplate Lifting eyebolt Paint 180T-360T 180T-360T Polypropylene Rust resistant Zinc plated Stainless steel engraved Included Alkyd Modified -RAL7030 Variable torque 20:1 Constant torque 20:1 180T-360T 180T-360T Conduit box Special Features Detail Stator Rotor, die cast aluminum Bearings Options Selection and Pricing Fan and fan cover Hardware Typical Performance Data Inverter Duty Warranty 60 months Hazrdous classification Service factor 1.0 Service factor 1.15 General Dimensions 2) CSA - 180T-360T (40ºC) Class I, Division 2, T3 temperature code NA 2014 Low Voltage AC Motors Selection and Pricing Guide 2-45 Part Number Index NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. 1) Standard voltage for stock items, see option selection and pricing section for additional voltages. 2) Available as option, Constant torque limited to 4:1. SIMOTICS Severe duty motors SD661 (Cast iron frame) NEMA Premium® Die cast aluminum rotor 460V 60Hz – Foot mounted HP RPM Frame Voltage Type Part Number List Price $ Mult. Symbl. FL Amps Fl Nom Eff. (%) Lbs 5 1800 184T 460 SD661 1LE2422-1CB31-2AA3 1039 SD3 6.5 89.5 124 7.5 1800 213T 460 SD661 1LE2422-2AB11-2AA3 1568 SD3 9.7 91.7 191 10 1800 215T 460 SD661 1LE2422-2AB21-2AA3 1842 SD3 12.5 91.7 197 15 1800 254T 460 SD661 1LE2422-2BB11-2AA3 2435 SD3 19.0 92.4 289 20 1800 256T 460 SD661 1LE2422-2BB21-2AA3 3113 SD3 25.0 93.0 322 25 1800 284T 460 SD661 1LE2422-2CB11-2AA3 3413 SD3 30.0 93.6 445 30 1800 286T 460 SD661 1LE2422-2CB21-2AA3 3910 SD3 35.0 93.6 465 40 1800 324T 460 SD661 1LE2422-3AB11-2AA3 5176 SD3 46.0 94.1 666 50 1800 326T 460 SD661 1LE2422-3AB21-2AA3 6229 SD3 58.0 94.5 700 60 1800 364T 460 SD661 1LE2422-3CB11-2AA3 8752 SD3 68.0 95.0 930 75 1800 365T 460 SD661 1LE2422-3CB21-2AA3 10814 SD3 85.0 95.4 1000 Stock 575V 60Hz – Foot mounted HP RPM Frame Voltage Type Part Number List Price $ Mult. Symbl. FL Amps Fl Nom Eff. (%) Lbs 5 1800 184T 575 SD661 1LE2422-1CB31-3AA3 1039 SD3 6.5 89.5 124 7.5 1800 213T 575 SD661 1LE2422-2AB11-3AA3 1568 SD3 9.7 91.7 191 10 1800 215T 575 SD661 1LE2422-2AB21-3AA3 1842 SD3 12.5 91.7 197 15 1800 254T 575 SD661 1LE2422-2BB11-3AA3 2435 SD3 19.0 92.4 289 20 1800 256T 575 SD661 1LE2422-2BB21-3AA3 3113 SD3 25.0 93.0 322 25 1800 284T 575 SD661 1LE2422-2CB11-3AA3 3413 SD3 30.0 93.6 445 30 1800 286T 575 SD661 1LE2422-2CB21-3AA3 3910 SD3 35.0 93.6 465 40 1800 324T 575 SD661 1LE2422-3AB11-3AA3 5176 SD3 46.0 94.1 666 50 1800 326T 575 SD661 1LE2422-3AB21-3AA3 6229 SD3 58.0 94.5 700 60 1800 364T 575 SD661 1LE2422-3CB11-3AA3 8752 SD3 68.0 95.0 930 75 1800 365T 575 SD661 1LE2422-3CB21-3AA3 10814 SD3 85.0 95.4 1000 NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. Stock availability subject to change. 2-46 2014 Low Voltage AC Motors Selection and Pricing Guide Stock Prices and Specifications are subject to change without notice. DOE#CC032A Introduction SIMOTICS Explosion proof motors XP100 General Purpose Motors XP100 explosion-proof motors are UL® listed for gas and dust ignition proof environments, and are suitable for use in Class I, Groups C&D, Class II, Groups F & G, Division 1 hazardous areas. US 3 YEAR ee WARRANTY HP Range Frame Size 1-300 HP 143T-449T NEMA Premium ® 143T-449T 3 phase 60Hz 1-20HP or up to 256T frames 10-100HP or from 280T thru 400T frames 125-300HP 1-300HP NEMA design B 2) NEMA MG1 Part 31 3) 1.15 Class B @ 1.0SF Class F @ 1.15SF Cast iron Casted 284-449T UL Approved C1045 DE & NDE DE Severe Duty Motors ® C Efficiency 208-230 / 460 V 230 / 460 V 460 V 575 V Insulation Frame 8 hole feet Condensation drains High strength carbon steel Shaft V ring slinger - IP65 Inpro/Seal® Bearing Isolator - IP66 Definite Purpose Motors Insulation Class F Service Factor @ 40ºC Temperature rise (Sine wave) Hazardous Duty Motors Voltage 1) Stator Rotor, die cast aluminum Cast iron Seal leads Random wound copper +NC Temp Protective devices 143T-449T Oversized 143T-449T 143T-449T Double shielded Bearing housing Inlet / relief fittings 143T-449T Cast iron Bearing caps Alemite / plug Conduit box Bearings Cast Iron Bidirectional fan Hardware Nameplate Lifting eyebolt Paint Options Selection and Pricing Fan and fan cover Oversized 143T-449T 143T-449T Polypropylene Rust resistant Zinc plated grade 5 only Stainless steel engraved Included above 75 lbs. Alkyd Modified -RAL7030 Typical Performance Data Inverter Duty Variable torque 20:1 Constant torque 4:1 143T-449T 143T-320T * 360T-449T up a frame Warranty 36 months Hazrdous classification Service factor 1.0 UL - 143T-326T (55ºC) Class I, Group C&D Class II Groups E, F&G, Division 1 T3C - temperature code UL - 143T-326T (40ºC) Class I, Group C&D Class II Groups E, F&G, Division 1 T3C - temperature code General Dimensions Service factor 1.15 Special Features Detail Stator/Windings Rotor 2014 Low Voltage AC Motors Selection and Pricing Guide 2-47 Part Number Index NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. 1) Standard voltage for stock items, see option selection and pricing section for additional voltages. 2) NEMA desing A: 250HP and 300HP, 4 and 6 pole. 3) 1.0 S.F. for 449T higher ratings: 300HP 2 &4 Pole , 250HP 6 Pole, 200HP 8 Pole. SIMOTICS Explosion proof motors XP100 NEMA Premium® Class I, Groups C&D, Class II, Groups F&G, Division 1 460V 60Hz – Foot mounted, HP RPM Frame Voltage Type 1 1800 143T 208-230/460 XP100 1 1200 145T 208-230/460 XP100 List Price $ Mult. Symbl. FL Amps Fl Nom Eff. (%) Lbs 1MB21211AB214AG3 862 XXP 1.4 85.5 77 1MB21211AC314AG3 1014 XXP 1.6 82.5 88 Part Number 1 900 182T 208-230/460 XP100 1MB21211CD114AG3 1874 XXP 2.1 81.5 100 1.5 3600 143T 208-230/460 XP100 1MB21211AA214AG3 905 XXP 2.0 84.0 55 1.5 1800 145T 208-230/460 XP100 1MB21211AB314AG3 927 XXP 2.1 86.5 88 1.5 1200 182T 208-230/460 XP100 1MB21211CC114AG3 1106 XXP 2.4 87.5 105 1.5 900 184T 208-230/460 XP100 1MB21211CD314AG3 2206 XXP 3.0 82.5 125 2 3600 145T 208-230/460 XP100 1MB21211AA314AG3 1028 XXP 2.5 85.5 65 2 1800 145T 208-230/460 XP100 1MB21211AB414AG3 990 XXP 2.7 86.5 88 2 1200 184T 208-230/460 XP100 1MB21211CC314AG3 1249 XXP 3.2 88.5 125 2 900 213T 208-230/460 XP100 1MB21212AD114AG3 2639 XXP 3.3 84.0 161 3 3600 182T 208-230/460 XP100 1MB21211CA114AG3 1123 XXP 3.8 86.5 88 3 1800 182T 208-230/460 XP100 1MB21211CB114AG3 1115 XXP 4.0 89.5 110 3 1200 213T 208-230/460 XP100 1MB21212AC114AG3 1522 XXP 4.3 89.5 173 3 900 215T 208-230/460 XP100 1MB21212AD214AG3 3170 XXP 4.8 85.5 173 5 3600 184T 208-230/460 XP100 1MB21211CA314AG3 1502 XXP 6.0 88.5 105 5 1800 184T 208-230/460 XP100 1MB21211CB314AG3 1366 XXP 6.4 89.5 125 5 1200 215T 208-230/460 XP100 1MB21212AC214AG3 2171 XXP 6.7 89.5 180 5 900 254T 208-230/460 XP100 1MB21212BD114AG3 3616 XXP 8.8 86.5 270 7.5 3600 213T 208-230/460 XP100 1MB21212AA114AG3 1695 XXP 8.8 89.5 165 7.5 1800 213T 208-230/460 XP100 1MB21212AB114AG3 1680 XXP 9.7 91.7 185 7.5 1200 254T 208-230/460 XP100 1MB21212BC114AG3 2627 XXP 10.0 91.0 285 7.5 900 256T 208-230/460 XP100 1MB21212BD214AG3 4131 XXP 13.0 87.5 300 10 3600 215T 208-230/460 XP100 1MB21212AA214AG3 1965 XXP 11.5 90.2 173 10 1800 215T 208-230/460 XP100 1MB21212AB214AG3 1995 XXP 12.5 91.7 187 10 1200 256T 208-230/460 XP100 1MB21212BC214AG3 3188 XXP 13.5 91.0 308 10 900 284T 230/460 XP100 1MB21212CD116AG3 5124 XXP 17.0 90.2 486 15 3600 254T 208-230/460 XP100 1MB21212BA114AG3 2671 XXP 17.5 91.0 283 15 1800 254T 208-230/460 XP100 1MB21212BB114AG3 2623 XXP 19.0 92.4 303 15 1200 284T 230/460 XP100 1MB21212CC116AG3 4415 XXP 21.0 91.7 481 15 900 286T 230/460 XP100 1MB21212CD216AG3 6574 XXP 23.0 91.0 531 20 3600 256T 208-230/460 XP100 1MB21212BA214AG3 3296 XXP 22.5 91.0 308 20 1800 256T 208-230/460 XP100 1MB21212BB214AG3 3252 XXP 25.0 93.0 340 20 1200 286T 230/460 XP100 1MB21212CC216AG3 5387 XXP 27.0 91.7 506 20 900 324T 230/460 XP100 1MB21213AD116AG3 8482 XXP 32.0 91.0 636 25 3600 284TS 230/460 XP100 1MB21212DA116AG3 4075 XXP 29.0 91.7 526 25 1800 284T 230/460 XP100 1MB21212CB116AG3 3912 XXP 30.0 93.6 501 25 1200 324T 230/460 XP100 1MB21213AC116AG3 6500 XXP 33.0 93.0 713 25 900 326T 230/460 XP100 1MB21213AD216AG3 9885 XXP 40.0 91.0 683 NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. Stock availability subject to change. 2-48 2014 Low Voltage AC Motors Selection and Pricing Guide Stock 900 RPM Motors meet or exceed EPAct efficiency. Prices and Specifications are subject to change without notice. DOE#CC032A 460V 60Hz – Foot mounted RPM Frame Voltage Type Part Number List Price $ Mult. Symb. FL Amps FL Nom Eff. (%) Lbs 30 3600 286TS 230/460 XP100 1MB21212DA216AG3 4757 XXP 34.0 91.7 521 30 1800 286T 230/460 XP100 1MB21212CB216AG3 4546 XXP 35.0 93.6 521 30 1200 326T 230/460 XP100 1MB21213AC216AG3 7518 XXP 39.0 93.0 678 30 900 364T 230/460 XP100 1MB21213CD116AG3 10420 XXP 41.0 91.7 860 40 3600 324TS 230/460 XP100 1MB21213BA116AG3 6044 XXP 45.0 93.6 606 40 1800 324T 230/460 XP100 1MB21213AB116AG3 5813 XXP 46.0 94.1 653 40 1200 364T 230/460 XP100 1MB21213CC116AG3 9692 XXP 49.0 94.1 835 900 365T 230/460 XP100 1MB21213CD216AG3 10319 XXP 63.0 91.7 940 50 3600 326TS 230/460 XP100 1MB21213BA216AG3 7708 XXP 55.0 93.6 615 50 1800 326T 230/460 XP100 1MB21213AB216AG3 7081 XXP 58.0 94.5 695 50 1200 365T 230/460 XP100 1MB21213CC216AG3 11191 XXP 62.0 94.1 870 900 404T 230/460 XP100 1MB21214AD116AG3 15978 XXP 67.0 92.4 1050 60 3600 364TS 230/460 XP100 1MB21213DA116AG3 9349 XXP 68.0 93.6 790 60 1800 364T 230/460 XP100 1MB21213CB116AG3 9248 XXP 68.0 95.0 890 60 1200 404T 230/460 XP100 1MB21214AC116AG3 12420 XXP 74.0 94.5 1055 60 900 405T 230/460 XP100 1MB21214AD216AG3 18166 XXP 78.0 92.4 1050 75 3600 365TS 230/460 XP100 1MB21213DA216AG3 11400 XXP 86.0 94.1 900 75 1800 365T 230/460 XP100 1MB21213CB216AG3 11369 XXP 85.0 95.4 960 75 1200 405T 230/460 XP100 1MB21214AC216AG3 14263 XXP 93.0 94.5 1025 900 444T 230/460 XP100 1MB21214CD116AG3 22527 XXP 94.0 93.6 1551 100 3600 405TS 230/460 XP100 1MB21214BA216AG3 16053 XXP 108.0 94.1 1020 100 1800 405T 230/460 XP100 1MB21214AB216AG3 14902 XXP 113.0 95.4 1115 100 1200 444T 230/460 XP100 1MB21214CC116AG3 20680 XXP 117.0 95.0 1551 900 445T 230/460 XP100 1MB21214CD216AG3 23716 XXP 123.0 94.1 1770 125 3600 444TS 460 XP100 1MB21214DA112AG3 19573 XXP 138.0 95.0 1450 125 1800 444T 460 XP100 1MB21214CB112AG3 18889 XXP 143.0 95.4 1659 125 1800 444TS 460 XP100 1MB21214DB112AG3 18281 XXP 143.0 95.4 1596 125 1800 444T 460 XP100 1MB21214EB112AG3 18281 XXP 143.0 95.4 1621 125 1200 445T 460 XP100 1MB21214CC212AG3 23252 XXP 144.0 95.0 1771 900 447T 460 XP100 1MB21214CD312AG3 32404 XXP 152.0 94.1 2029 150 3600 445TS 460 XP100 1MB21214DA212AG3 24048 XXP 164.0 95.0 1611 150 1800 445T 460 XP100 1MB21214CB212AG3 22391 XXP 170.0 95.8 1934 150 1800 445TS 460 XP100 1MB21214DB212AG3 21783 XXP 170.0 95.8 1706 150 1800 445T 460 XP100 1MB21214EB212AG3 21783 XXP 170.0 95.8 1896 150 1200 447T 460 XP100 1MB21214CC312AG3 26725 XXP 172.0 95.8 2029 150 900 449T 460 XP100 1MB21214CD512AG3 36954 XXP 180.0 94.1 2508 Typical Performance Data 125 Options Selection and Pricing 100 Special Features Detail 75 Definite Purpose Motors 50 Hazardous Duty Motors 40 Stock Severe Duty Motors HP General Purpose Motors XP100 NEMA Premium® Class I, Groups C&D, Class II, Groups F&G, Division 1 Introduction SIMOTICS Explosion proof motors General Dimensions Stock availability subject to change. 900 RPM Motors meet or exceed EPAct efficiency. Prices and Specifications are subject to change without notice. DOE#CC032A 2014 Low Voltage AC Motors Selection and Pricing Guide 2-49 Part Number Index NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. Shaded ratings indicated roller bearings. SIMOTICS Explosion proof motors XP100 NEMA Premium® Class I, Groups C&D, Class II, Groups F&G, Division 1 460V 60Hz – Foot mounted HP RPM Frame Voltage Type Part Number List Price $ Mult. Symb. FL Amps FL Nom Eff. (%) Lbs 200 3600 447TS 460 XP100 1MB21214DA312AG3 30713 XXP 216.0 95.4 2250 200 1800 447T 460 XP100 1MB21214CB312AG3 27448 XXP 228.0 96.2 2314 200 1800 447TS 460 XP100 1MB21214DB312AG3 26840 XXP 228.0 96.2 2250 200 1800 447T 460 XP100 1MB21214EB312AG3 26840 XXP 228.0 96.2 2276 200 1200 449T 460 XP100 1MB21214CC512AG3 31759 XXP 227.0 95.8 2450 200 1200 449T 460 XP100 1MB21214EC512AG3 31151 XXP 227.0 95.8 2440 200 900 449T 460 XP100 1MB21214CD612AG3 39665 XXP 240.0 94.5 2450 250 3600 449TS 460 XP100 1MB21214DA512AG3 37573 XXP 265.0 95.8 2300 250 1800 449T 2) 460 XP100 1MB21214CB512AG3 32881 XXP 278.0 96.2 2453 250 1800 449TS 2) 460 XP100 1MB21214DB512AG3 32273 XXP 278.0 96.2 2453 2453 2) 250 1800 449T 460 XP100 1MB21214EB512AG3 32273 XXP 278.0 96.2 250 1200 449TS 2) 460 XP100 1MB21214DC612AG3 38095 XXP 281.0 95.8 2400 300 3600 449TS 460 XP100 1MB21214DA612AG3 55226 XXP 325.0 95.8 2300 300 1800 449T 2) 460 XP100 1MB21214CB612AG3 42083 XXP 338.0 96.2 2350 300 1800 449T 2) 460 XP100 1MB21214EB612AG3 41475 XXP 338.0 96.2 2315 300 1800 449TS 2) 460 XP100 1MB21214DB612AG3 41475 XXP 338.0 96.2 2315 NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. Shaded ratings indicated roller bearings. 2-50 2014 Low Voltage AC Motors Selection and Pricing Guide Stock NEMA design A Stock availability subject to change. 900 RPM Motors meet or exceed EPAct efficiency. Prices and Specifications are subject to change without notice. DOE#CC032A 2) 460V 60Hz – C-face footless with canopy HP RPM Frame Voltage Type Part Number List Price $ Mult. Symb. FL Amps FL Nom Eff. (%) Lbs 1 1800 143TCV 230/460 XP100 1MB21211AB216LG3 1076 XXP 1.4 85.5 82 1 1200 145TCV 230/460 XP100 1MB21211AC316LG3 1228 XXP 1.6 82.5 93 900 182TCV 230/460 XP100 1MB21211CD116LG3 2111 XXP 2.1 81.5 99 3600 143TCV 230/460 XP100 1MB21211AA216LG3 1119 XXP 2.0 84.0 60 1.5 1800 145TCV 230/460 XP100 1MB21211AB316LG3 1141 XXP 2.1 86.5 93 1.5 1200 182TCV 230/460 XP100 1MB21211CC116LG3 1343 XXP 2.4 87.5 104 900 184TCV 230/460 XP100 1MB21211CD316LG3 2443 XXP 3.0 82.5 124 2 3600 145TCV 230/460 XP100 1MB21211AA316LG3 1242 XXP 2.5 85.5 70 2 1800 145TCV 230/460 XP100 1MB21211AB416LG3 1204 XXP 2.7 86.5 93 2 1200 184TCV 230/460 XP100 1MB21211CC316LG3 1486 XXP 3.2 88.5 124 158 230/460 XP100 1MB21212AD116LG3 2878 XXP 3.3 84.0 182TCV 230/460 XP100 1MB21211CA116LG3 1360 XXP 3.8 86.5 87 3 1800 182TCV 230/460 XP100 1MB21211CB116LG3 1352 XXP 4.0 89.5 109 3 1200 213TCV 230/460 XP100 1MB21212AC116LG3 1761 XXP 4.3 89.5 170 3 900 215TCV 230/460 XP100 1MB21212AD216LG3 3409 XXP 4.8 85.5 170 5 3600 184TCV 230/460 XP100 1MB21211CA316LG3 1739 XXP 6.0 88.5 104 5 1800 184TCV 230/460 XP100 1MB21211CB316LG3 1603 XXP 6.4 89.5 124 5 1200 215TCV 230/460 XP100 1MB21212AC216LG3 2410 XXP 6.7 89.5 177 5 900 254TCV 230/460 XP100 1MB21212BD116LG3 3934 XXP 8.8 86.5 268 7.5 3600 213TCV 230/460 XP100 1MB21212AA116LG3 1934 XXP 8.8 89.5 163 7.5 1800 213TCV 230/460 XP100 1MB21212AB116LG3 1919 XXP 9.7 91.7 183 7.5 1200 254TCV 230/460 XP100 1MB21212BC116LG3 2945 XXP 10.0 91.0 283 7.5 900 256TCV 230/460 XP100 1MB21212BD216LG3 4449 XXP 13.0 87.5 298 10 3600 215TCV 230/460 XP100 1MB21212AA216LG3 2204 XXP 11.5 90.2 170 10 1800 215TCV 230/460 XP100 1MB21212AB216LG3 2234 XXP 12.5 91.7 185 10 1200 256TCV 230/460 XP100 1MB21212BC216LG3 3506 XXP 13.5 91.0 306 15 3600 254TCV 230/460 XP100 1MB21212BA116LG3 2989 XXP 17.5 91.0 281 15 1800 254TCV 230/460 XP100 1MB21212BB116LG3 2941 XXP 19.0 92.4 301 15 1200 284TCV 230/460 XP100 1MB21212CC116LG3 4888 XXP 21.0 91.7 484 20 3600 256TCV 230/460 XP100 1MB21212BA216LG3 3614 XXP 22.5 91.0 306 20 1800 256TCV 230/460 XP100 1MB21212BB216LG3 3570 XXP 25.0 93.0 338 Options Selection and Pricing 213TCV 3600 Special Features Detail 900 3 Definite Purpose Motors 2 Hazardous Duty Motors 1.5 Severe Duty Motors 1 1.5 Stock General Purpose Motors XP100 NEMA Premium® Class I, Groups C&D, Class II, Groups F&G, Division 1 Introduction SIMOTICS Explosion proof motors Typical Performance Data General Dimensions 900 RPM Motors meet or exceed EPAct efficiency. Prices and Specifications are subject to change without notice. DOE#CC032A 2014 Low Voltage AC Motors Selection and Pricing Guide 2-51 Part Number Index NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. Stock availability subject to change. SIMOTICS Explosion proof motors XP100 NEMA Premium® Class I, Groups C&D, Class II, Groups F&G, Division 1 575V 60Hz, Foot mounted HP RPM Frame Voltage Type Part Number List Price $ Mult. Symb. FL Amps FL Nom Eff. (%) Lbs 1 1800 143T 575 XP100 1MB21211AB213AG3 862 XXP 1.1 85.5 77 1 1200 145T 575 XP100 1MB21211AC313AG3 1014 XXP 1.3 82.5 88 1 900 182T 575 XP100 1MB21211CD113AG3 1874 XXP 1.7 81.5 100 1.5 3600 143T 575 XP100 1MB21211AA213AG3 905 XXP 1.6 84.0 55 1.5 1800 145T 575 XP100 1MB21211AB313AG3 927 XXP 1.7 86.5 88 1.5 1200 182T 575 XP100 1MB21211CC113AG3 1106 XXP 1.9 87.5 105 1.5 900 184T 575 XP100 1MB21211CD313AG3 2206 XXP 2.4 82.5 125 2 3600 145T 575 XP100 1MB21211AA313AG3 1028 XXP 2.0 85.5 65 2 1800 145T 575 XP100 1MB21211AB413AG3 990 XXP 2.2 86.5 88 2 1200 184T 575 XP100 1MB21211CC313AG3 1249 XXP 2.6 88.5 125 161 2 900 213T 575 XP100 1MB21212AD113AG3 2639 XXP 2.6 84.0 3 3600 182T 575 XP100 1MB21211CA113AG3 1123 XXP 3.0 86.5 88 3 1800 182T 575 XP100 1MB21211CB113AG3 1115 XXP 3.2 89.5 110 3 1200 213T 575 XP100 1MB21212AC113AG3 1522 XXP 3.4 89.5 173 3 900 215T 575 XP100 1MB21212AD213AG3 3170 XXP 3.9 85.5 173 5 3600 184T 575 XP100 1MB21211CA313AG3 1502 XXP 4.8 88.5 105 5 1800 184T 575 XP100 1MB21211CB313AG3 1366 XXP 5.1 89.5 125 5 1200 215T 575 XP100 1MB21212AC213AG3 2171 XXP 5.4 89.5 180 5 900 254T 575 XP100 1MB21212BD113AG3 3616 XXP 7.0 86.5 270 7.5 3600 213T 575 XP100 1MB21212AA113AG3 1695 XXP 7.0 89.5 165 7.5 1800 213T 575 XP100 1MB21212AB113AG3 1680 XXP 7.8 91.7 185 7.5 1200 254T 575 XP100 1MB21212BC113AG3 2627 XXP 8.0 91.0 285 7.5 900 256T 575 XP100 1MB21212BD213AG3 4131 XXP 10.5 87.5 300 10 3600 215T 575 XP100 1MB21212AA213AG3 1965 XXP 9.2 90.2 173 10 1800 215T 575 XP100 1MB21212AB213AG3 1995 XXP 10.0 91.7 187 10 1200 256T 575 XP100 1MB21212BC213AG3 3188 XXP 11.0 91.0 308 10 900 284T 575 XP100 1MB21212CD113AG3 5124 XXP 14.0 90.2 486 15 3600 254T 575 XP100 1MB21212BA113AG3 2671 XXP 14.0 91.0 283 15 1800 254T 575 XP100 1MB21212BB113AG3 2623 XXP 15.0 92.4 303 15 1200 284T 575 XP100 1MB21212CC113AG3 4415 XXP 17.0 91.7 481 15 900 286T 575 XP100 1MB21212CD213AG3 6574 XXP 18.5 91.0 531 20 3600 256T 575 XP100 1MB21212BA213AG3 3296 XXP 18.0 91.0 308 20 1800 256T 575 XP100 1MB21212BB213AG3 3252 XXP 20.0 93.0 340 20 1200 286T 575 XP100 1MB21212CC213AG3 5387 XXP 21.5 91.7 506 20 900 324T 575 XP100 1MB21213AD113AG3 8482 XXP 25.0 91.0 636 25 3600 284TS 575 XP100 1MB21212DA113AG3 4075 XXP 23.0 91.7 526 25 1800 284T 575 XP100 1MB21212CB113AG3 3912 XXP 24.0 93.6 501 25 1200 324T 575 XP100 1MB21213AC113AG3 6500 XXP 26.0 93.0 713 25 900 326T 575 XP100 1MB21213AD213AG3 9885 XXP 32.0 91.0 683 30 3600 286TS 575 XP100 1MB21212DA213AG3 4757 XXP 27.0 91.7 521 30 1800 286T 575 XP100 1MB21212CB213AG3 4546 XXP 28.0 93.6 521 30 1200 326T 575 XP100 1MB21213AC213AG3 7518 XXP 31.0 93.0 678 30 900 364T 575 XP100 1MB21213CD113AG3 10420 XXP 33.0 91.7 860 NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. 2-52 2014 Low Voltage AC Motors Selection and Pricing Guide Stock Stock availability subject to change. 900 RPM Motors meet or exceed EPAct efficiency. Prices and Specifications are subject to change without notice. 575V 60Hz, Foot mounted RPM Frame Voltage Type Part Number List Price $ Mult. Symb. FL Amps FL Nom Eff. (%) Lbs 40 3600 324TS 575 XP100 1MB21213BA113AG3 6044 XXP 36.0 93.6 606 40 1800 324T 575 XP100 1MB21213AB113AG3 5813 XXP 37.0 94.1 653 40 1200 364T 575 XP100 1MB21213CC113AG3 9692 XXP 39.0 94.1 835 40 900 365T 575 XP100 1MB21213CD213AG3 10319 XXP 51.0 91.7 940 50 3600 326TS 575 XP100 1MB21213BA213AG3 7708 XXP 44.0 93.6 615 50 1800 326T 575 XP100 1MB21213AB213AG3 7081 XXP 46.0 94.5 695 50 1200 365T 575 XP100 1MB21213CC213AG3 11191 XXP 50.0 94.1 870 50 900 404T 575 XP100 1MB21214AD113AG3 15978 XXP 54.0 92.4 1050 3600 364TS 575 XP100 1MB21213DA113AG3 9349 XXP 54.5 93.6 790 1800 364T 575 XP100 1MB21213CB113AG3 9248 XXP 54.5 95.0 890 60 1200 404T 575 XP100 1MB21214AC113AG3 12420 XXP 59.0 94.5 1055 60 900 405T 575 XP100 1MB21214AD213AG3 18166 XXP 63.0 92.4 1050 3600 365TS 575 XP100 1MB21213DA213AG3 11400 XXP 86.0 94.1 900 1800 365T 575 XP100 1MB21213CB213AG3 11369 XXP 85.0 95.4 960 75 1200 405T 575 XP100 1MB21214AC213AG3 14263 XXP 93.0 94.5 1025 75 900 444T 575 XP100 1MB21214CD113AG3 22527 XXP 94.0 93.6 1551 100 3600 405TS 575 XP100 1MB21214BA213AG3 16053 XXP 87.0 94.1 1020 100 1800 405T 575 XP100 1MB21214AB213AG3 14902 XXP 90.5 95.4 1115 100 1200 444T 575 XP100 1MB21214CC113AG3 20680 XXP 94.0 95.0 1551 575 XP100 1MB21214CD213AG3 23716 XXP 98.0 94.1 1770 444TS 575 XP100 1MB21214DA113AG3 19573 XXP 110.0 95.0 1450 125 1800 444TS 575 XP100 1MB21214DB113AG3 18281 XXP 115.0 95.4 1596 125 1800 444T 575 XP100 1MB21214CB113AG3 18889 XXP 115.0 95.4 1659 125 1200 445T 575 XP100 1MB21214CC213AG3 23252 XXP 115.0 95.0 1771 125 900 447T 575 XP100 1MB21214CD313AG3 32404 XXP 152.0 94.1 2029 150 3600 445TS 575 XP100 1MB21214DA213AG3 24048 XXP 131.0 95.0 1611 150 1800 445TS 575 XP100 1MB21214DB213AG3 21783 XXP 136.0 95.8 1706 150 1800 445T 575 XP100 1MB21214CB213AG3 22391 XXP 136.0 95.8 1934 150 1200 447T 575 XP100 1MB21214CC313AG3 26725 XXP 138.0 95.8 2029 150 900 449T 575 XP100 1MB21214CD513AG3 36954 XXP 144.0 94.1 2508 200 3600 447TS 575 XP100 1MB21214DA313AG3 30713 XXP 173.0 95.4 2250 200 1800 447TS 575 XP100 1MB21214DB313AG3 26840 XXP 182.0 96.2 2250 200 1800 447T 575 XP100 1MB21214CB313AG3 27448 XXP 182.0 96.2 2314 200 1200 449T 575 XP100 1MB21214CC513AG3 31759 XXP 182.0 95.8 2450 200 900 449T 575 XP100 1MB21214CD613AG3 39665 XXP 192.0 94.5 2450 250 3600 449TS 575 XP100 1MB21214DA513AG3 37573 XXP 212.0 95.8 2300 250 1800 449TS 2) 575 XP100 1MB21214DB513AG3 32273 XXP 223.0 96.2 2453 250 1200 449TS 2) 575 XP100 1MB21214DC613AG3 38095 XXP 225.0 95.8 2400 300 3600 449TS 575 XP100 1MB21214DA613AG3 55226 XXP 250.0 95.8 2300 300 1800 449TS 2) 575 XP100 1MB21214DB613AG3 41475 XXP 268.0 96.2 2315 Typical Performance Data 445T 3600 Options Selection and Pricing 900 125 Special Features Detail 100 Definite Purpose Motors 75 75 Hazardous Duty Motors 60 60 Stock Severe Duty Motors HP General Purpose Motors XP100 NEMA Premium® Class I, Groups C&D, Class II, Groups F&G, Division 1 Introduction SIMOTICS Explosion proof motors General Dimensions 2) NEMA design A Stock availability subject to change. 900 RPM Motors meet or exceed EPAct efficiency. Prices and Specifications are subject to change without notice. 2014 Low Voltage AC Motors Selection and Pricing Guide 2-53 Part Number Index NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. Shaded ratings indicated roller bearings. Introduction SIMOTICS Explosion proof motors XP100 ID1 General Purpose Motors XP100 ID1 explosion-proof motors are designed to meet demanding standards of performance and provide long life under oil field operating conditions. They are UL® listed and CSA certified for Class I, Division 1, Group D and Class I, Zone 1, Group IIA hazardous locations and meet the requirements of IP55 for enclosure protection. US 3 YEAR ee HP range WARRANTY Frame Size 1-300 HP 143T-449T Severe Duty Motors ® C Efficiency Random wound copper 143T-449T Cast iron Seal leads 143T-449T 143T-449T Double shielded Bearing housing Inlet / relief fittings 143T-449T Cast iron Alemite / plug Cast iron Bidirectional fan 143T-449T 143T-449T Nameplate Lifting eyebolt Paint Rust resistant Zinc plated grade 5 only Stainless steel engraved Included above 75 lbs. Alkyd Modified -RAL7030 Variable torque 100:1 Constant torque 4:1 143T-449T 143T-449T Insulation Insulation Class F Service Factor @ 40ºC Temperature rise (Sine wave) Frame Special Features Detail Stator Rotor, die cast aluminum 208-230 / 460 V 230 / 460 V 460 V 575 V Definite Purpose Motors 8 hole feet Condensation drains High strength carbon steel Shaft V ring slinger – IP65 Inpro/Seal® Bearing Isolator - IP66 143T-449T 3 phase 60Hz 1-20HP 10-100HP 125-300HP 1-300HP NEMA design B 2) NEMA MG1 Part 31 1.15 Class B @ 1.0SF Class F @ 1.15SF Cast iron Casted 284-449T UL Approved C1045 DE & NDE available upon request Voltage 1) Hazardous Duty Motors NEMA Premium ® Plus NEMA Premium ® Stator/Windings rotor Conduit box Bearings Options Selection and Pricing Bearing caps Fan and fan cover Hardware Polypropylene Typical Performance Data Inverter duty Warranty 36 months Hazardous classification UL - 143T-449T (up to 55ºC) Class I, Group D Division 1 T2A - temperature code 3) T2D - temperature code General Dimensions Service factor 1.0 Service factor 1.15 2014 Low Voltage AC Motors Selection and Pricing Guide 2-55 Part Number Index NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. 1) Standard voltage for stock items, see option selection and pricing section for additional voltages. 2) NEMA design A: 250HP and 300HP, 4 and 6 pole. 3) Available on request. SIMOTICS Explosion proof motors XP100 ID1 NEMA Premium® Class 1, Group D, Division 1 460V 60Hz - Foot mounted Mult. Symb. FL Amps FL Nom Eff. (%) Lbs HP RPM Frame Voltage Type Part Number List Price $ 1 1800 143T 208-230/460 XP100 ID1 1MB22211AB214AA3 779 DXP 1.4 85.5 77 1 1200 145T 208-230/460 XP100 ID1 1MB22211AC314AA3 905 DXP 1.6 82.5 88 1.5 3600 143T 208-230/460 XP100 ID1 1MB22211AA214AA3 810 DXP 2.0 84.0 55 1.5 1800 145T 208-230/460 XP100 ID1 1MB22211AB314AA3 833 DXP 2.1 86.5 88 1.5 1200 182T 208-230/460 XP100 ID1 1MB22211CC114AA3 984 DXP 2.4 87.5 105 2 3600 145T 208-230/460 XP100 ID1 1MB22211AA314AA3 918 DXP 2.5 85.5 65 2 1800 145T 208-230/460 XP100 ID1 1MB22211AB414AA3 888 DXP 2.7 86.5 88 2 1200 184T 208-230/460 XP100 ID1 1MB22211CC314AA3 1108 DXP 3.2 88.5 125 3 3600 182T 208-230/460 XP100 ID1 1MB22211CA114AA3 999 DXP 3.8 86.5 88 3 1800 182T 208-230/460 XP100 ID1 1MB22211CB114AA3 995 DXP 4.0 89.5 110 3 1200 213T 208-230/460 XP100 ID1 1MB22212AC114AA3 1345 DXP 4.3 89.5 173 5 3600 184T 208-230/460 XP100 ID1 1MB22211CA314AA3 1326 DXP 6.0 88.5 105 5 1800 184T 208-230/460 XP100 ID1 1MB22211CB314AA3 1211 DXP 6.4 89.5 125 5 1200 215T 208-230/460 XP100 ID1 1MB22212AC214AA3 1903 DXP 6.7 89.5 180 7.5 3600 213T 208-230/460 XP100 ID1 1MB22212AA114AA3 1489 DXP 8.8 89.5 165 7.5 1800 213T 208-230/460 XP100 ID1 1MB22212AB114AA3 1481 DXP 9.7 91.7 185 7.5 1200 254T 208-230/460 XP100 ID1 1MB22212BC114AA3 2292 DXP 10.0 91.0 285 10 3600 215T 208-230/460 XP100 ID1 1MB22212AA214AA3 1717 DXP 11.5 90.2 173 10 1800 215T 208-230/460 XP100 ID1 1MB22212AB214AA3 1750 DXP 12.5 91.7 187 10 1200 256T 208-230/460 XP100 ID1 1MB22212BC214AA3 2767 DXP 13.5 91.0 308 15 3600 254T 208-230/460 XP100 ID1 1MB22212BA114AA3 2322 DXP 17.5 91.0 283 15 1800 254T 208-230/460 XP100 ID1 1MB22212BB114AA3 2290 DXP 19.0 92.4 303 15 1200 284T 230/460 XP100 ID1 1MB22212CC116AA3 3814 DXP 21.0 91.7 481 20 3600 256T 208-230/460 XP100 ID1 1MB22212BA214AA3 2857 DXP 22.5 91.0 308 20 1800 256T 208-230/460 XP100 ID1 1MB22212BB214AA3 2829 DXP 25.0 93.0 340 20 1200 286T 230/460 XP100 ID1 1MB22212CC216AA3 4638 DXP 27.0 91.7 506 25 3600 284TS 230/460 XP100 ID1 1MB22212DA116AA3 3526 DXP 29.0 91.7 530 25 1800 284T 230/460 XP100 ID1 1MB22212CB116AA3 3396 DXP 30.0 93.6 501 25 1200 324T 230/460 XP100 ID1 1MB22213AC116AA3 5584 DXP 33.0 93.0 713 NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. 2-56 2014 Low Voltage AC Motors Selection and Pricing Guide Stock Stock availability subject to change. Prices and Specifications are subject to change without notice. DOE#CC032A NEMA Premium® Class 1, Group D, Division 1 460V 60Hz - Foot mounted Voltage Type Part Number List Price $ Mult. Symb. FL Amps FL Nom Eff. (%) Lbs 30 3600 286TS 230/460 XP100 ID1 1MB22212DA216AA3 4110 DXP 34.0 91.7 525 30 1800 286T 230/460 XP100 ID1 1MB22212CB216AA3 3940 DXP 35.0 93.6 521 30 1200 326T 230/460 XP100 ID1 1MB22213AC216AA3 6449 DXP 39.0 93.0 678 40 3600 324TS 230/460 XP100 ID1 1MB22213BA116AA3 5211 DXP 45.0 93.6 615 40 1800 324T 230/460 XP100 ID1 1MB22213AB116AA3 5028 DXP 46.0 94.1 653 40 1200 364T 230/460 XP100 ID1 1MB22213CC116AA3 8296 DXP 49.0 94.1 835 50 3600 326TS 230/460 XP100 ID1 1MB22213BA216AA3 6636 DXP 55.0 93.6 615 50 1800 326T 230/460 XP100 ID1 1MB22213AB216AA3 6116 DXP 58.0 94.5 687 50 1200 365T 230/460 XP100 ID1 1MB22213CC216AA3 9567 DXP 62.0 94.1 870 60 3600 364TS 230/460 XP100 ID1 1MB22213DA116AA3 8675 DXP 68.0 93.6 790 60 1800 364T 230/460 XP100 ID1 1MB22213CB116AA3 8611 DXP 68.0 95.0 890 60 1200 404T 230/460 XP100 ID1 1MB22214AC116AA3 11445 DXP 74.0 94.5 1055 75 3600 365TS 230/460 XP100 ID1 1MB22213DA216AA3 10490 DXP 86.0 94.1 900 75 1800 365T 230/460 XP100 ID1 1MB22213CB216AA3 10498 DXP 85.0 95.4 960 75 1200 405T 230/460 XP100 ID1 1MB22214AC216AA3 13033 DXP 93.0 94.5 1025 100 3600 405TS 230/460 XP100 ID1 1MB22214BA216AA3 14644 DXP 108.0 94.1 1020 100 1800 405T 230/460 XP100 ID1 1MB22214AB216AA3 13641 DXP 113.0 95.4 1115 230/460 XP100 ID1 1MB22214CC116AA3 18789 DXP 117.0 95.0 1551 230/460 XP100 ID1 1MB22214EC116AA3 18181 DXP 117.0 95.0 1513 125 3600 444TS 460 XP100 ID1 1MB22214DA112AA3 17760 DXP 138.0 95.0 1450 125 1800 444T 460 XP100 ID1 1MB22214CB112AA3 17254 DXP 143.0 95.4 1659 125 1800 444T 460 XP100 ID1 1MB22214EB112AA3 16646 DXP 143.0 95.4 1621 125 1200 445T 460 XP100 ID1 1MB22214CC212AA3 21013 DXP 144.0 95.0 1771 125 1200 445T 460 XP100 ID1 1MB22214EC212AA3 20405 DXP 144.0 95.0 1733 150 3600 445TS 460 XP100 ID1 1MB22214DA212AA3 21743 DXP 164.0 95.0 1611 150 1800 445T 460 XP100 ID1 1MB22214CB212AA3 20369 DXP 170.0 95.8 1934 150 1800 445T 460 XP100 ID1 1MB22214EB212AA3 19761 DXP 170.0 95.8 1896 150 1200 447T 460 XP100 ID1 1MB22214CC312AA3 24055 DXP 172.0 95.8 2029 150 1200 447T 460 XP100 ID1 1MB22214EC312AA3 23447 DXP 172.0 95.8 1991 200 3600 447TS 460 XP100 ID1 1MB22214DA312AA3 27361 DXP 216.0 95.4 2250 200 1800 447T 460 XP100 ID1 1MB22214CB312AA3 24601 DXP 228.0 96.2 2314 200 1800 447T 460 XP100 ID1 1MB22214EB312AA3 23993 DXP 228.0 96.2 2276 200 1200 449T 460 XP100 ID1 1MB22214CC512AA3 28163 DXP 227.0 95.8 2450 200 1200 449T 460 XP100 ID1 1MB22214EC512AA3 27555 DXP 227.0 95.8 2440 250 3600 449TS 460 XP100 ID1 1MB22214DA512AA3 32434 DXP 265.0 95.8 2300 250 1800 449T 1) 460 XP100 ID1 1MB22214CB512AA3 28562 DXP 278.0 96.2 2453 250 1800 449T 1) 460 XP100 ID1 1MB22214EB512AA3 27954 DXP 278.0 96.2 2453 3600 449TS 460 XP100 ID1 1MB22214DA612AA3 41503 DXP 325.0 95.8 2300 1800 449T 1) 460 XP100 ID1 1MB22214CB612AA3 31882 DXP 338.0 96.2 2350 300 1800 449T 1) 460 XP100 ID1 1MB22214EB612AA3 31274 DXP 338.0 96.2 2340 General Dimensions 300 300 Typical Performance Data 444T 444T Options Selection and Pricing 1200 1200 Special Features Detail 100 100 Stock Definite Purpose Motors Frame Hazardous Duty Motors RPM Severe Duty Motors HP Stock availability subject to change. Prices and Specifications are subject to change without notice. DOE#CC032A 2014 Low Voltage AC Motors Selection and Pricing Guide 2-57 Part Number Index NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. Shaded ratings indicated roller bearings. General Purpose Motors XP100 ID1 Introduction SIMOTICS Explosion proof motors SIMOTICS Explosion proof motors XP100 ID1 NEMA Premium® Class 1, Group D, Division 1 460V 60Hz - C-face footless without drip cover HP RPM Frame Voltage Type Part Number List Price $ Mult. Symb. FL Amps FL Nom Eff. (%) Lbs 82 1 1800 143TC 230/460 XP100 ID1 1MB22211AB216GA3 869 DXP 1.4 85.5 1.5 1800 145TC 230/460 XP100 ID1 1MB22211AB316GA3 923 DXP 2.1 86.5 93 2 1800 145TC 230/460 XP100 ID1 1MB22211AB416GA3 978 DXP 2.7 86.5 93 3 1800 182TC 230/460 XP100 ID1 1MB22211CB116GA3 1127 DXP 4.0 89.5 109 5 1800 184TC 230/460 XP100 ID1 1MB22211CB316GA3 1343 DXP 6.4 89.5 124 7.5 1800 213TC 230/460 XP100 ID1 1MB22212AB116GA3 1613 DXP 9.7 91.7 183 10 1800 215TC 230/460 XP100 ID1 1MB22212AB216GA3 1882 DXP 12.5 91.7 185 15 1800 254TC 230/460 XP100 ID1 1MB22212BB116GA3 2470 DXP 19.0 92.4 301 20 1800 256TC 230/460 XP100 ID1 1MB22212BB216GA3 3009 DXP 25.0 93.0 338 25 1800 284TC 230/460 XP100 ID1 1MB22212CB116GA3 3662 DXP 30.0 93.6 504 30 1800 286TC 230/460 XP100 ID1 1MB22212CB216GA3 4206 DXP 35.0 93.6 524 NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. Shaded ratings indicated roller bearings. 2-58 2014 Low Voltage AC Motors Selection and Pricing Guide Stock 1) NEMA Design A Stock availability subject to change. Prices and Specifications are subject to change without notice. DOE#CC032A NEMA Premium® Class 1, Group D, Division 1 575V 60Hz - Foot mounted HP RPM Frame Voltage Type Part Number List Price $ Mult. Symb. FL Amps FL Nom Eff. (%) Lbs 2 1800 145T 575 XP100 ID1 1MB22211AB413AA3 888 DXP 2.2 86.5 88 3 1800 182T 575 XP100 ID1 1MB22211CB113AA3 995 DXP 3.2 89.5 110 575 XP100 ID1 1MB22211CB313AA3 1211 DXP 5.1 89.5 125 575 XP100 ID1 1MB22212AB113AA3 1481 DXP 7.8 91.7 185 10 1800 215T 575 XP100 ID1 1MB22212AB213AA3 1750 DXP 10.0 91.7 187 15 1800 254T 575 XP100 ID1 1MB22212BB113AA3 2290 DXP 15.0 92.4 303 20 1800 256T 575 XP100 ID1 1MB22212BB213AA3 2829 DXP 20.0 93.0 340 25 1800 284T 575 XP100 ID1 1MB22212CB113AA3 3396 DXP 24.0 93.6 501 30 1800 286T 575 XP100 ID1 1MB22212CB213AA3 3940 DXP 28.0 93.6 521 40 1800 324T 575 XP100 ID1 1MB22213AB113AA3 5028 DXP 37.0 94.1 653 50 1800 326T 575 XP100 ID1 1MB22213AB213AA3 6116 DXP 46.0 94.5 687 60 1800 364T 575 XP100 ID1 1MB22213CB113AA3 8611 DXP 54.5 95.0 890 75 1800 365T 575 XP100 ID1 1MB22213CB213AA3 10498 DXP 85.0 95.4 960 100 1800 405T 575 XP100 ID1 1MB22214AB213AA3 13641 DXP 90.5 95.4 1115 125 1800 444T 575 XP100 ID1 1MB22214CB113AA3 17254 DXP 115.0 95.4 1659 125 1800 444T 575 XP100 ID1 1MB22214EB113AA3 16646 DXP 115.0 95.4 1621 150 1800 445T 575 XP100 ID1 1MB22214CB213AA3 20369 DXP 136.0 95.8 1934 150 1800 445T 575 XP100 ID1 1MB22214EB213AA3 19761 DXP 136.0 95.8 1896 Definite Purpose Motors 184T 213T Hazardous Duty Motors 1800 1800 Severe Duty Motors 5 7.5 Stock General Purpose Motors XP100 ID1 Introduction SIMOTICS Explosion proof motors Special Features Detail Options Selection and Pricing Typical Performance Data General Dimensions Stock availability subject to change. Prices and Specifications are subject to change without notice. DOE#CC032A 2014 Low Voltage AC Motors Selection and Pricing Guide 2-59 Part Number Index NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. QuikMOD Delivery for stocked motors only. Shaded ratings indicated roller bearings. ® C US 3 YEAR ee HP range WARRANTY Frame Size 1-250 HP 143T-449T NEMA Premium ® 8 hole feet Condensation drains High strength carbon steel Shaft V ring slinger – IP54 143T-449T 3 phase 60Hz 1-200HP 1-200HP NEMA design B NEMA MG1 Part 31 1.0 Class B @ 1.0SF Class F @ 1.15SF Cast iron Casted single hole for 250T&280T frames. T Drains Two on lowest point in frame C1045 DE & NDE Stator Rotor, die cast aluminum Random wound copper 143T-449T Cast iron Neoprene gasket 143T-449T 143T-449T Double shielded Single shielded Bearing housing Inlet / relief fittings 143T-256T 284T-449T Cast iron Alemite / plug Cast iron Bidirectional fan Nameplate Lifting eyebolt Paint 143T-449T 143T-449T Polypropylene Rust resistant Zinc plated Stainless steel engraved Included above 75 lbs. Alkyd Modified - RAL7030 Variable torque 20:1 143T-449T Severe Duty Motors SD10 MS high efficiency, severe duty, multi-speed motors are ideal for both indoor and outdoor below deck applications and in severe duty operating atmospheres, such as cooling towers, that require more than one base speed. They meet or exceed NEMA and CSA standards and the operational standards for severe operating environments. General Purpose Motors SD10 MS 4/8 Poles 1 Winding Variable Torque 1 Winding Variable Torque Introduction SIMOTICS Definite purpose motors Efficiency 460 V 575 V Insulation Insulation Class F Service Factor @ 40ºC Temperature rise (Sine wave) Stator/Windings rotor Special Features Detail Conduit box Bearings Bearing caps Options Selection and Pricing Fan and fan cover Hardware Definite Purpose Motors Frame Hazardous Duty Motors Voltage 1) Inverter duty Typical Performance Data Warranty 36 months NA Hazardous classification Service factor 1.0 Service factor 1.15 General Dimensions 2014 Low Voltage AC Motors Selection and Pricing Guide 2-61 Part Number Index NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. 1) Standard voltage for stock items, see option selection and pricing section for additional voltages. SIMOTICS Definite purpose motors SD10 MS (Multi-speed) 1 Winding variable torque 460V 60Hz - Foot mounted HP RPM High 1 1.5 2 3 5 5 7.5 10 15 20 25 30 40 50 60 75 100 100 100 125 125 125 150 150 Low 0.25 0.37 0.5 0.75 1.2 1.2 1.9 2.5 3.7 5 6.2 7.5 10 12 15 19 25 25 25 31 31 31 37 37 High 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 Low 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900 Frame 143T 145T 182T 184T 184T 213T 215T 254T 256T 284T 286T 324T 326T 364T 365T 405T 444TS 444T B444T 445TS 445T B445T 447TS 447T Voltage 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 460 Type SD10 MS SD10 MS SD10 MS SD10 MS SD10 MS SD10 MS SD10 MS SD10 MS SD10 MS SD10 MS SD10 MS SD10 MS SD10 MS SD10 MS SD10 MS SD10 MS SD10 MS SD10 MS SD10 MS SD10 MS SD10 MS SD10 MS SD10 MS SD10 MS Part Number 1LE23011AM240AA3 1LE23011AM340AA3 1LE23011CM140AA3 1LE23011CM340AA3 1LE23011CM440AA3 1LE23012AM140AA3 1LE23012AM240AA3 1LE23012BM140AA3 1LE23012BM240AA3 1LE23012CM140AA3 1LE23012CM240AA3 1LE23013AM140AA3 1LE23013AM240AA3 1LE23013CM140AA3 1LE23013CM240AA3 1LE23014AM240AA3 1LE23014DM140AA3 1LE23014CM140AA3 1LE23014EM140AA3 1LE23014DM240AA3 1LE23014CM240AA3 1LE23014EM240AA3 1LE23014DM340AA3 1LE23014CM340AA3 List Price $ 772 856 948 1052 1183 1229 1617 2006 2642 3293 3905 4552 6047 7427 10655 13506 15263 15871 15263 19439 20047 19439 23463 24071 Mult. Symb. SD4 SD4 SD4 SD4 SD4 SD4 SD4 SD4 SD4 SD4 SD4 SD4 SD4 SD4 SD4 SD4 SD4 SD4 SD4 SD4 SD4 SD4 SD4 SD4 150 200 200 200 250 37 50 50 50 62.5 1800 1800 1800 1800 1800 900 900 900 900 900 B447T 449TS 449T B449T 449TS 460 460 460 460 460 SD10 MS SD10 MS SD10 MS SD10 MS SD10 MS 1LE23014EM340AA3 1LE23014DM540AA3 1LE23014CM540AA3 1LE23014EM540AA3 1LE23014DM640AA3 23463 28213 28821 28213 38956 SD4 SD4 SD4 SD4 SD4 250 250 62.5 62.5 1800 1800 900 900 449T B449T 460 460 SD10 MS SD10 MS 1LE23014CM640AA3 1LE23014EM640AA3 39564 38956 SD4 SD4 Low 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900 900 Frame 286T 324T 326T 364T 365T 405T 444TS B444T 445TS B445T 447TS B447T 449TS B449T 449TS B449T Voltage 575 575 575 575 575 575 575 575 575 575 575 575 575 575 575 575 Type SD10 MS SD10 MS SD10 MS SD10 MS SD10 MS SD10 MS SD10 MS SD10 MS SD10 MS SD10 MS SD10 MS SD10 MS SD10 MS SD10 MS SD10 MS SD10 MS Part Number 1LE23012CM244AA3 1LE23013AM144AA3 1LE23013AM244AA3 1LE23013CM144AA3 1LE23013CM244AA3 1LE23014AM244AA3 1LE23014DM144AA3 1LE23014EM144AA3 1LE23014DM244AA3 1LE23014EM244AA3 1LE23014DM344AA3 1LE23014EM344AA3 1LE23014DM544AA3 1LE23014EM544AA3 1LE23014DM644AA3 1LE23014EM644AA3 List Price $ 3905 4552 6047 7427 10655 13506 15263 15263 19439 19439 23463 23463 28213 28213 38956 38956 Mult. Symb. SD4 SD4 SD4 SD4 SD4 SD4 SD4 SD4 SD4 SD4 SD4 SD4 SD4 SD4 SD4 SD4 575V 60Hz - Foot mounted HP High 25 30 40 50 60 75 100 100 125 125 150 150 200 200 250 250 RPM Low 6.2 7.5 10 12 15 19 25 25 31 31 37 37 50 50 62.5 62.5 High 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 1800 QuikMOD Delivery for stocked motors only. Stock availability subject to change. 2-62 2014 Low Voltage AC Motors Selection and Pricing Guide Prices and Specifications are subject to change without notice. RGKESDI / RGZESDI Adjustable speed drive only General Purpose Motors ® US ee HP Range 3 YEAR RGZESDI 10:1 CT RGZESDI / RGKESDI 1000:1 CT WARRANTY 1-400 HP 143T-S449 NEMA Premium ® 3 phase 60Hz 460 V 575 V 143T-S449 Single voltage only 1-400HP 1-400HP Insulation Class F Service Factor @ 40ºC NEMA MG1 Part 31 1.0 Variable frequency drive operation ONLY. Cast iron Casted single hole for 250T&280T frames T Drain C1045 DE & NDE Hazardous Duty Motors Frame Size Efficiency Voltage 1) Severe Duty Motors RGZESDI / RGKESDI Severe duty TEFC / TEBC (blower cooled) motors are designed for inverted or vectro applications where up to a 10:1 or 1000:1 constant torque speed range is required. These motors are well suited to be used with adjustable speed applications such as mixers, chemical processing, pulp and paper, waste management and petro/chemical. C Introduction SIMOTICS Definite purpose motors Insulation 8 hole feet Condensation drains High strength carbon steel shaft V ring slinger - IP54 Inpro/Seal® Bearing Isolator - IP55 Definite Purpose Motors Frame Stator/Windings Rotor Single shielded Bearing housing Grease Inlet / relief fittings 143T-S449 Cast iron Polyurea base Alemite / plug Cover Bidirectional fan Uni-directional fan Nameplate Lifting eyebolt Paint Cast Iron - 143T-S449 143T-449T Polypropylene 2 Pole - 350-400HP Rust resistant Zinc plated grade 5 only Stainless steel engraved Included above 75 lbs. Alkyd Modified - RAL7030 Constant torque 1000:1 Constant torque 1000:1 Non-ventilated 143T-256T Blower cooled 254T-449T Conduit box Bearings Bearing caps Fan and fan cover Hardware Typical Performance Data Inverter Duty Warranty 36 months NA Hazardous classification Options Selection and Pricing Cast iron Random wound copper NC Temp. Protective devices 143T-S449 Oversized 143T-S449 Special Features Detail Stator Rotor, die cast aluminum Service factor 1.0 Service factor 1.15 General Dimensions 2014 Low Voltage AC Motors Selection and Pricing Guide 2-63 Part Number Index NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. Standard voltage for stock items, see option selection and pricing section for additional voltages. 1) SIMOTICS Definite purpose motors RGKESDI / RGZESDI 1000:1 Constant torque Adjustable speed drive only 460V 60Hz – Foot mounted HP RPM Frame Voltage Type Part Number List Price $ Mult. Symb. FL Amps Lbs 1 1800 145T 460 RGKESDI 1000:1 1PC29111AB512AG3 1295 SA-7INV 1.4 55 1 1200 182T 460 RGKESDI 1000:1 1PC29111CC612AG3 1616 SA-7INV 1.8 85 1.5 3600 182T 460 RGKESDI 1000:1 1PC29111CA612AG3 1722 SA-7INV 2.0 85 1.5 1800 182T 460 RGKESDI 1000:1 1PC29111CB612AG3 1440 SA-7INV 2.2 85 1.5 1200 184T 460 RGKESDI 1000:1 1PC29111CC712AG3 1729 SA-7INV 2.4 100 2 3600 184T 460 RGKESDI 1000:1 1PC29111CA812AG3 1893 SA-7INV 2.5 100 2 1800 182T 460 RGKESDI 1000:1 1PC29111CB512AG3 1584 SA-7INV 2.7 85 2 1200 213T 460 RGKESDI 1000:1 1PC29112KC512AG3 1938 SA-7INV 3.2 130 3 3600 213T 460 RGKESDI 1000:1 1PC29112KA112AG3 2241 SA-7INV 3.7 130 3 1800 184T 460 RGKESDI 1000:1 1PC29111CB712AG3 1745 SA-7INV 4.2 100 3 1200 215T 460 RGKESDI 1000:1 1PC29112AC012AG3 2437 SA-7INV 4.3 162 5 3600 215T 460 RGKESDI 1000:1 1PC29112KA212AG3 2563 SA-7INV 5.8 162 5 1800 213T 460 RGKESDI 1000:1 1PC29112KB512AG3 2051 SA-7INV 6.5 157 5 1200 254T 460 RGKESDI 1000:1 1PC29112KC612AG3 2855 SA-7INV 7.1 250 7.5 3600 254T 460 RGKESDI 1000:1 1PC29112KA312AG3 2873 SA-7INV 8.7 250 7.5 1800 254T 460 RGKESDI 1000:1 1PC29112BB712AG3 2799 SA-7INV 9.5 245 7.5 1200 256T 460 RGKESDI 1000:1 1PC29112BC012AG3 3397 SA-7INV 10.0 300 10 3600 256T 460 RGKESDI 1000:1 1PC29112KA412AG3 3521 SA-7INV 12.5 300 10 1800 256T 460 RGKESDI 1000:1 1PC29112BB812AG3 3386 SA-7INV 12.5 285 10 1200 256T 460 RGZESDI 1000:1 1PC29212BC212AG3 5476 SA-7INV 13.0 330 15 3600 254T 460 RGZESDI 1000:1 1PC29212BA112AG3 4775 SA-7INV 18.0 330 15 1800 254T 460 RGZESDI 1000:1 1PC29212BB112AG3 3465 SA-7INV 20.0 330 15 1200 284T 460 RGZESDI 1000:1 1PC29212CC112AG3 6892 SA-7INV 20.0 460 20 3600 256T 460 RGZESDI 1000:1 1PC29212BA212AG3 5246 SA-7INV 23.0 375 20 1800 256T 460 RGZESDI 1000:1 1PC29212BB212AG3 4113 SA-7INV 27.0 375 20 1200 286T 460 RGZESDI 1000:1 1PC29212CC212AG3 6946 SA-7INV 26.0 530 25 3600 284TS 460 RGZESDI 1000:1 1PC29212DA112AG3 6124 SA-7INV 29.0 4600 25 1800 284T 460 RGZESDI 1000:1 1PC29212CB112AG3 5728 SA-7INV 29.0 460 25 1200 324T 460 RGZESDI 1000:1 1PC29213AC112AG3 8781 SA-7INV 33.0 645 30 3600 286TS 460 RGZESDI 1000:1 1PC29212DA212AG3 6767 SA-7INV 34.0 680 30 1800 286T 460 RGZESDI 1000:1 1PC29212CB212AG3 6315 SA-7INV 35.0 680 30 1200 326T 460 RGZESDI 1000:1 1PC29213AC212AG3 10364 SA-7INV 39.0 680 40 3600 324TS 460 RGZESDI 1000:1 1PC29213BA112AG3 8571 SA-7INV 46.0 645 40 1800 324T 460 RGZESDI 1000:1 1PC29213AB112AG3 7985 SA-7INV 47.0 645 40 1200 364T 460 RGZESDI 1000:1 1PC29213CC112AG3 13339 SA-7INV 52.0 910 50 3600 326TS 460 RGZESDI 1000:1 1PC29213BA212AG3 10149 SA-7INV 55.0 680 50 1800 326T 460 RGZESDI 1000:1 1PC29213AB212AG3 9423 SA-7INV 58.0 680 50 1200 365T 460 RGZESDI 1000:1 1PC29213CC212AG3 15990 SA-7INV 66.0 930 QuikMOD Delivery for stocked motors only. Stock availability subject to change. Prices and Specifications are subject to change without notice. 2-64 2014 Low Voltage AC Motors Selection and Pricing Guide Stock 460V 60Hz – Foot mounted RPM Frame Voltage Type Part Number List Price $ Mult. Symb. FL Amps Lbs 60 3600 364TS 460 RGZESDI 1000:1 1PC29213DA112AG3 13063 SA-7INV 68.0 910 60 1800 364T 460 RGZESDI 1000:1 1PC29213CB112AG3 12128 SA-7INV 71.0 910 60 1200 404T 460 RGZESDI 1000:1 1PC29214AC112AG3 17738 SA-7INV 72.0 1180 75 3600 365TS 460 RGZESDI 1000:1 1PC29213DA212AG3 15706 SA-7INV 85.0 930 75 1800 365T 460 RGZESDI 1000:1 1PC29213CB212AG3 14538 SA-7INV 87.0 930 75 1200 405T 460 RGZESDI 1000:1 1PC29214AC212AG3 19549 SA-7INV 87.0 1330 100 3600 405TS 460 RGZESDI 1000:1 1PC29214BA212AG3 19152 SA-7INV 110.0 1330 100 1800 405T 460 RGZESDI 1000:1 1PC29214AB212AG3 17716 SA-7INV 113.0 1330 1200 444TS 460 RGZESDI 1000:1 1PC29214DC112AG3 24573 SA-7INV 115.0 1700 3600 444TS 460 RGZESDI 1000:1 1PC29214DA112AG3 24203 SA-7INV 136.0 1700 125 1800 444TS 460 RGZESDI 1000:1 1PC29214DB112AG3 22342 SA-7INV 143.0 1700 125 1200 445TS 460 RGZESDI 1000:1 1PC29214DC212AG3 27891 SA-7INV 144.0 1820 3600 445TS 460 RGZESDI 1000:1 1PC29214DA212AG3 27511 SA-7INV 160.0 1820 1800 445TS 460 RGZESDI 1000:1 1PC29214DB212AG3 25358 SA-7INV 169.0 1820 150 1200 447TS 460 RGZESDI 1000:1 1PC29214DC312AG3 33023 SA-7INV 169.0 2080 200 3600 447TS 460 RGZESDI 1000:1 1PC29214DA312AG3 33586 SA-7INV 208.0 2080 200 1800 447TS 460 RGZESDI 1000:1 1PC29214DB312AG3 30024 SA-7INV 223.0 2080 200 1200 449TS 460 RGZESDI 1000:1 1PC29214DC512AG3 46594 SA-7INV 222.0 2380 250 3600 449TS 460 RGZESDI 1000:1 1PC29214DA512AG3 40915 SA-7INV 264.0 2380 1800 449TS 460 RGZESDI 1000:1 1PC29214DB512AG3 37666 SA-7INV 282.0 2380 1200 449TS 460 RGZESDI 1000:1 1PC29214DC612AG3 51017 SA-7INV 285.0 2380 3600 449TS 460 RGZESDI 1000:1 1PC29214DA612AG3 58875 SA-7INV 330.0 2380 1800 449TS 460 RGZESDI 1000:1 1PC29214DB612AG3 42363 SA-7INV 345.0 2380 300 1200 S449SS 460 RGZESDI 1000:1 1PC29214GC112AG3 65204 SA-7INV 335.0 4130 350 3600 S449SS 460 RGZESDI 1000:1 1PC29214GA112AG3 54724 SA-7INV 370.0 4130 350 1800 S449SS 460 RGZESDI 1000:1 1PC29214GB212AG3 54258 SA-7INV 390.0 4130 350 1200 S449SS 460 RGZESDI 1000:1 1PC29214GC312AG3 73149 SA-7INV 396.0 4130 400 3600 S449SS 460 RGZESDI 1000:1 1PC29214GA312AG3 67277 SA-7INV 420.0 4130 400 1800 S449SS 460 RGZESDI 1000:1 1PC29214GB312AG3 63061 SA-7INV 450.0 4130 Options Selection and Pricing 300 300 Special Features Detail 250 250 Definite Purpose Motors 150 150 Hazardous Duty Motors 100 125 Stock Severe Duty Motors HP General Purpose Motors RGKESDI / RGZESDI 1000:1 Constant torque Adjustable speed drive only Introduction SIMOTICS Definite purpose motors Typical Performance Data General Dimensions 2014 Low Voltage AC Motors Selection and Pricing Guide 2-65 Part Number Index QuikMOD Delivery for stocked motors only. Stock availability subject to change. Prices and Specifications are subject to change without notice. SIMOTICS Definite purpose motors RGKESDI / RGZESDI In additon to our variable speed drive only motors, the SIMOTICS product line of motors also offer a variable speed drive operation for both severe duty and general purpose applications as well as for explosion proof clasifications areas. In general, our standard line design is suitable for inverter or vector applications where a maximum of 4:1 constant torque is required, motors with copper rotor design GP100, SD100 and SD100 IEEE841 can provide up to 10:1 Constant torque and our Severe Duty line in four pole motors frame sizes 143-365 is suitable for up to 20:1 constant torque. SIMOTICS NEMA Motors NEMA Premium® Max. Horse Power Frame Size Poles Constant Torque Variable Torque GP100A 20HP 143T-256T 2-8 15 Hz – 60 Hz 3 Hz – 60 Hz GP100 200HP 143T-449T 2-8 15 Hz – 60 Hz 3 Hz – 60 Hz SD100 1) 75HP 143T-365T 2-8 3 Hz – 60 Hz 5) 3 Hz – 60 Hz 150HP 400T- 445T 4 2, 6, 8 6 Hz – 60 Hz 2, 3) 15 Hz – 60 Hz 2, 3) 3 Hz – 60 Hz 200HP 447T 4 2, 6, 8 10 Hz – 60 Hz 2, 3) 15 Hz – 60 Hz 2, 5) 3 Hz – 60 Hz 400HP 449T- S449T 2-8 15 Hz – 60 Hz 5) 3 Hz – 60 Hz 3 Hz – 60 Hz SD100 IEEE841 1) 75HP 143T-365T 2-8 3 Hz – 60 Hz 5) 15 Hz – 60 Hz 150HP 400T- 445T 4, 2, 6, 8 6 Hz – 60 Hz 2, 3) 15 Hz – 60 Hz 5) 3 Hz – 60 Hz 200HP 447T 4, 2, 6, 8 10 Hz – 60 Hz 2, 3) 15 Hz – 60 Hz 5) 3 Hz – 60 Hz 400HP 449T-S449T 2-8 15 Hz – 60 Hz 3 Hz – 60 Hz 50HP 143T-326T 2-8 15 Hz – 60 Hz 3 Hz – 60 Hz 200HP 364T-447T 2-8 15 Hz – 60 Hz 2) 3 Hz – 60 Hz 250HP 449T 2-8 15 Hz – 60 Hz 4) 3 Hz – 60 Hz XP100 ID1 300HP 143T-449T 2-8 15 Hz – 60 Hz 0.6 Hz – 60 Hz NEMA Premium®+ (Cu Rotor) Max. Horse Power Frame Size Poles Constant Torque* Variable Torque GP100A 20HP 143T-256T 2-6 6 Hz – 60 Hz 3 Hz – 60 Hz GP100 20HP 143T-256T 2-6 6 Hz – 60 Hz 3 Hz – 60 Hz SD100 20HP 143T-256T 2-6 3 Hz – 60 Hz 3 Hz – 60 Hz SD100 IEEE841 20HP 143T-256T 2-6 3 Hz – 60 Hz 3 Hz – 60 Hz XP100 For available options for RGZESDI motors, please refer to SD100 motors option list. 1)Also available for use in Class I Division 2, Groups A, B, C or D, or Zone 2. 2)Requires cooling fan modification (M05). 2-66 2014 Low Voltage AC Motors Selection and Pricing Guide 5) 3)15Hz - 60Hz as standard. 4)On request. 5)Four pole motors are marked with VFD capability on the nameplate as standard. RGZVESD – Vertical solid shaft Normal thrust General Purpose Motors RGZVESD P-base vertical solid shaft motors are ideal for applications such as centrifugal and turbine pumps. US ee Frame Size 1-250HP 143HP-449HP Standard (NEMA MG1 Table 12-11) 143HP-449HP 3 phase 60Hz 1-20HP 25-250HP 1-250HP NEMA design B NEMA MG1 Part 31 1.15 3 YEAR WARRANTY Hazardous Duty Motors HP Range Down thrust: 355 to 1,860 lbs. Up thrust: 380 to 2,800 lbs. Efficiency Voltage 1) 230 / 460 V 460 V 575 V Insulation Class F Service Factor @ 40ºC Temperature rise (Sine wave) Stator Rotor die cast aluminum Random wound copper 143HP-449HP Cast iron Neoprene gasket 143HP-449HP 143HP-449HP Double shielded Single shielded Open Bearing housing Bearing housing/bearing cap Grease Inlet / relief fittings 284HP-365HP 440HP (DE), 440HP (NDE) 404HP-405HP (DE & NDE) 143HP-254HP & 440HP (DE) Cast iron Bearing cape Cast iron / 143HP-449HP Polyurea base Alemite / plug Cover Bidirectional fan 143HP-449HP Cast iron 143HP-449HP Polypropylene Nameplate Lifting eyebolt Paint Rust resistant Zinc plated Stainless steel engraved NA Alkyd - RAL7030 Variable torque 20:1 Constant torque 4:1 143HP-449HP 143HP-449HP Frame Special Features Detail Condensation drains High strength carbon steel shaft V ring slinger - IP54 Class B @ 1.0SF Class F @ 1.15SF Cast iron T-drain C1045 DE & NDE Definite Purpose Motors Insulation Stator/Windings Rotor Conduit box (oversize) Options Selection and Pricing Bearings Typical Performance Data Fan and fan cover Hardware Inverter Duty General Dimensions Warranty 36 months Hazrdous classification Service factor 1.0 2) CSA - 143HP-449HP (40ºC) Class I, Division 2, T3 temperature code 449-S449 T2D Service factor 1.15 2014 Low Voltage AC Motors Selection and Pricing Guide 2-67 Part Number Index 1) Standard voltage for stock items, see option selection and pricing section for additional voltages. 2) Available as an option. Severe Duty Motors ® C Introduction SIMOTICS Definite purpose motors SIMOTICS Definite purpose motors RGZVESD – Vertical solid shaft Normal thrust 460V 60Hz Mult. Symb. SA-7 Cont. Thrust (LBS) FL Nom Eff. (%) Lbs 82.5 70 HP RPM Frame Voltage Type Part Number List Price $ 1 1800 143HP 230/460 RGZVESD 1PC28111BB216TA3 905 1 1200 145HP 230/460 RGZVESD 1PC28111BC316TA3 1227 SA-7 445 415 1.6 80.0 75 1 900 182HP 230/460 RGZVESD 1PC28111DD116TA3 1878 SA-7 495 465 1.9 74.0 85 Up Dwn FL Amps 380 355 1.5 1.5 3600 143HP 230/460 RGZVESD 1PC28111BA216TA3 1165 SA-7 295 275 1.9 85.5 70 1.5 1800 145HP 230/460 RGZVESD 1PC28111BB316TA3 1047 SA-7 385 330 2.2 84.0 75 1.5 1200 182HP 230/460 RGZVESD 1PC28111DC116TA3 1452 SA-7 550 510 2.3 85.5 85 1.5 900 184HP 230/460 RGZVESD 1PC28111DD216TA3 2119 SA-7 615 570 2.6 77.0 100 2 3600 145HP 230/460 RGZVESD 1PC28111BA316TA3 1226 SA-7 295 275 2.5 84.0 75 2 1800 145HP 230/460 RGZVESD 1PC28111BB416TA3 1186 SA-7 385 350 2.7 84.0 75 2 1200 184HP 230/460 RGZVESD 1PC28111DC216TA3 1671 SA-7 550 510 3.0 86.5 100 2 900 213HP 230/460 RGZVESD 1PC28112AD316TA3 2426 SA-7 615 570 3.3 82.5 135 3 3600 182HP 230/460 RGZVESD 1PC28111DA116TA3 1610 SA-7 365 340 3.6 85.5 85 3 1800 182HP 230/460 RGZVESD 1PC28111DB116TA3 1421 SA-7 480 430 3.9 87.5 85 3 1200 213HP 230/460 RGZVESD 1PC28112AC316TA3 2205 SA-7 785 725 4.0 87.5 135 3 900 215HP 230/460 RGZVESD 1PC28112AD416TA3 3050 SA-7 875 810 4.7 84.0 160 5 3600 184HP 230/460 RGZVESD 1PC28111DA216TA3 2257 SA-7 375 330 5.8 87.5 100 5 1800 184HP 230/460 RGZVESD 1PC28111DB216TA3 1979 SA-7 485 425 6.5 87.5 100 5 1200 215HP 230/460 RGZVESD 1PC28112AC416TA3 3105 SA-7 790 720 6.8 87.5 160 5 900 254HP 230/460 RGZVESD 1PC28112BD316TA3 3736 SA-7 885 805 7.5 85.5 245 7.5 3600 213HP 230/460 RGZVESD 1PC28112AA316TA3 2721 SA-7 525 475 8.8 88.5 135 7.5 1800 213HP 230/460 RGZVESD 1PC28112AB316TA3 2712 SA-7 685 610 9.5 89.5 135 7.5 1200 254HP 230/460 RGZVESD 1PC28112BC316TA3 3702 SA-7 1130 1025 9.8 89.5 245 7.5 900 256HP 230/460 RGZVESD 1PC28112BD416TA3 4536 SA-7 1260 1150 11.5 85.5 285 10 3600 215HP 230/460 RGZVESD 1PC28112AA416TA3 3048 SA-7 530 470 12.0 89.5 160 10 1800 215HP 230/460 RGZVESD 1PC28112AB416TA3 3051 SA-7 690 605 12.5 89.5 160 10 1200 256HP 230/460 RGZVESD 1PC28112BC416TA3 4182 SA-7 1140 1015 13.0 89.5 285 10 900 284HP 230/460 RGZVESD 1PC28112CD316TA3 5513 SA-7 1275 1140 15.0 88.5 485 15 3600 254HP 230/460 RGZVESD 1PC28112BA316TA3 3514 SA-7 760 670 17.0 90.2 245 15 1800 254HP 230/460 RGZVESD 1PC28112BB316TA3 3645 SA-7 980 870 18.7 91.0 245 15 1200 284HP 230/460 RGZVESD 1PC28112CC316TA3 4876 SA-7 1170 985 20.0 90.2 485 15 900 286HP 230/460 RGZVESD 1PC28112CD416TA3 6705 SA-7 1310 1100 23.0 88.5 520 20 3600 256HP 230/460 RGZVESD 1PC28112BA416TA3 3843 SA-7 765 665 23.0 90.2 285 20 1800 256HP 230/460 RGZVESD 1PC28112BB416TA3 4155 SA-7 995 855 26.0 91.0 285 20 1200 286HP 230/460 RGZVESD 1PC28112CC416TA3 5926 SA-7 1190 965 26.0 90.2 520 20 900 324HP 230/460 RGZVESD 1PC28113AD316TA3 8187 SA-7 1330 1080 31.0 89.5 565 25 3600 284HP 460 RGZVESD 1PC28112CA312TA3 4135 SA-7 785 645 29.0 91.0 485 25 1800 284HP 460 RGZVESD 1PC28112CB312TA3 4632 SA-7 1020 830 29.0 92.4 485 25 1200 324HP 460 RGZVESD 1PC28113AC312TA3 6934 SA-7 1795 1535 33.0 91.7 565 25 900 326HP 460 RGZVESD 1PC28113AD412TA3 9386 SA-7 2000 1720 38.0 89.5 710 QuikMOD Delivery for stocked motors only. Stock availability subject to change. 2-68 2014 Low Voltage AC Motors Selection and Pricing Guide Stock Prices and Specifications are subject to change without notice. DOE#CC032A RGZVESD – Vertical solid shaft Normal thrust Mult. Symb. SA-7 Cont. Thrust (LBS) Voltage Type Part Number 30 3600 286HP 460 RGZVESD 1PC28112CA412TA3 4476 30 1800 286HP 460 RGZVESD 1PC28112CB412TA3 5211 SA-7 1035 815 35.0 92.4 520 30 1200 326HP 460 RGZVESD 1PC28113AC412TA3 7917 SA-7 1820 1510 39.0 91.7 710 30 900 364HP 460 RGZVESD 1PC28113CD312TA3 10888 SA-7 2320 1860 46.8 91.0 800 40 3600 324HP 460 RGZVESD 1PC28113AA312TA3 6145 SA-7 1205 1005 45.0 91.7 565 40 1800 324HP 460 RGZVESD 1PC28113AB312TA3 6207 SA-7 1570 1290 47.0 93.0 565 40 1200 364HP 460 RGZVESD 1PC28113CC312TA3 10365 SA-7 2075 1675 52.0 93.0 800 40 900 365HP 460 RGZVESD 1PC28113CD412TA3 13008 SA-7 2340 1840 63.0 91.0 875 50 3600 326HP 460 RGZVESD 1PC28113AA412TA3 7709 SA-7 1215 995 55.0 92.4 710 50 1800 326HP 460 RGZVESD 1PC28113AB412TA3 7360 SA-7 1585 1275 58.0 93.0 710 50 1200 365HP 460 RGZVESD 1PC28113CC412TA3 12220 SA-7 2095 1660 66.0 93.0 875 50 900 404HP 460 RGZVESD 1PC28114AD312TA3 15555 SA-7 2370 1810 67.0 91.7 1290 60 3600 364HP 460 RGZVESD 1PC28113CA312TA3 9811 SA-7 1410 1080 68.0 93.0 800 60 1800 364HP 460 RGZVESD 1PC28113CB312TA3 9758 SA-7 1795 1435 71.0 93.6 800 60 1200 404HP 460 RGZVESD 1PC28114AC312TA3 13935 SA-7 2155 1595 74.0 93.6 1290 60 900 405HP 460 RGZVESD 1PC28114AD412TA3 17639 SA-7 2410 1770 78.0 91.7 1420 75 3600 365HP 460 RGZVESD 1PC28113CA412TA3 12128 SA-7 1420 1070 85.0 93.0 875 75 1800 365HP 460 RGZVESD 1PC28113CB412TA3 12168 SA-7 1815 1415 87.0 94.1 875 75 1200 405HP 460 RGZVESD 1PC28114AC412TA3 16339 SA-7 2195 1555 93.0 93.6 1420 Up Dwn FL Amps FL Nom Eff. (%) Lbs 795 635 34.0 91.0 520 900 444HP 460 RGZVESD 1PC28114HD112TA3 23134 SA-7 2495 1685 94.0 93.0 1740 3600 405HP 460 RGZVESD 1PC28114AA412TA3 16157 SA-7 1475 1015 108.0 93.6 1420 100 1800 405HP 460 RGZVESD 1PC28114AB412TA3 15016 SA-7 1915 1315 113.0 94.5 1420 100 1200 444HP 460 RGZVESD 1PC28114HC112TA3 21843 SA-7 2315 1435 117.0 94.1 1740 100 900 445HP 460 RGZVESD 1PC28114HD212TA3 28345 SA-7 2565 1615 123.0 93.0 1930 125 1800 444HP 460 RGZVESD 1PC28114HB112TA3 19658 SA-7 1975 1255 143.0 94.5 1740 445HP 460 RGZVESD 1PC28114HC212TA3 26405 SA-7 2385 1365 144.0 94.1 1930 900 447HP 460 RGZVESD 1PC28114HD312TA3 32565 SA-7 2670 1510 152.0 93.6 2280 150 1800 445HP 460 RGZVESD 1PC28114HB212TA3 22678 SA-7 2060 1170 170.0 95.0 1930 150 1200 447HP 460 RGZVESD 1PC28114HC312TA3 32814 SA-7 2400 1350 170.0 95.0 2280 150 900 447HP 460 RGZVESD 1PC28114HD412TA3 37030 SA-7 2730 1450 186.0 93.6 2280 200 1800 447HP 460 RGZVESD 1PC28114HB312TA3 30998 SA-7 2115 1115 225.0 95.0 2280 200 1200 449HP 460 RGZVESD 1PC28114HC512TA3 37386 SA-7 2450 1300 226.0 95.0 2600 200 900 449HP 460 RGZVESD 1PC28114HD612TA3 41664 SA-7 2800 1380 241.0 94.1 2600 250 1800 449HP 460 RGZVESD 1PC28114HB512TA3 36014 SA-7 2185 1045 281.0 95.0 2600 250 1200 449HP 460 RGZVESD 1PC28114HC612TA3 41115 SA-7 2520 1230 280.0 95.0 2600 Typical Performance Data 1200 Options Selection and Pricing 125 125 Special Features Detail 75 100 Stock Definite Purpose Motors Frame Hazardous Duty Motors RPM Severe Duty Motors HP List Price $ General Purpose Motors 460V 60Hz Introduction SIMOTICS Definite purpose motors General Dimensions Prices and Specifications are subject to change without notice. DOE#CC032A 2014 Low Voltage AC Motors Selection and Pricing Guide 2-69 Part Number Index QuikMOD Delivery for stocked motors only. Stock availability subject to change. SIMOTICS Definite purpose motors RGZVESD – Vertical solid shaft Normal thrust 575V 60Hz HP RPM Frame Voltage Type Part Number List Price $ Mult. Symb. Cont. Thrust (LBS) Up Dwn FL Amps FL Nom Eff. (%) Lbs 1 1800 143HP 575 RGZVESD 1PC28111BB213TA3 905 SA-7 380 355 1.5 82.5 70 1 1200 145HP 575 RGZVESD 1PC28111BC313TA3 1227 SA-7 445 415 1.6 80.0 75 1 900 182HP 575 RGZVESD 1PC28111DD113TA3 1878 SA-7 495 465 1.9 74.0 85 1.5 3600 143HP 575 RGZVESD 1PC28111BA213TA3 1165 SA-7 295 275 1.9 85.5 70 1.5 1800 145HP 575 RGZVESD 1PC28111BB313TA3 1047 SA-7 385 330 2.2 84.0 75 1.5 1200 182HP 575 RGZVESD 1PC28111DC113TA3 1452 SA-7 550 510 2.3 85.5 85 1.5 900 184HP 575 RGZVESD 1PC28111DD213TA3 2119 SA-7 615 570 2.6 77.0 100 2 3600 145HP 575 RGZVESD 1PC28111BA313TA3 1226 SA-7 295 275 2.5 84.0 75 2 1800 145HP 575 RGZVESD 1PC28111BB413TA3 1186 SA-7 385 350 2.7 84.0 75 2 1200 184HP 575 RGZVESD 1PC28111DC213TA3 1671 SA-7 550 510 3.0 86.5 100 2 900 213HP 575 RGZVESD 1PC28112AD313TA3 2426 SA-7 615 570 3.3 82.5 135 3 3600 182HP 575 RGZVESD 1PC28111DA113TA3 1610 SA-7 365 340 3.6 85.5 85 3 1800 182HP 575 RGZVESD 1PC28111DB113TA3 1421 SA-7 480 430 3.9 87.5 85 3 1200 213HP 575 RGZVESD 1PC28112AC313TA3 2205 SA-7 785 725 4.0 87.5 135 3 900 215HP 575 RGZVESD 1PC28112AD413TA3 3050 SA-7 875 810 4.7 84.0 160 5 3600 184HP 575 RGZVESD 1PC28111DA213TA3 2257 SA-7 375 330 5.8 87.5 100 5 1800 184HP 575 RGZVESD 1PC28111DB213TA3 1979 SA-7 485 425 6.5 87.5 100 5 1200 215HP 575 RGZVESD 1PC28112AC413TA3 3105 SA-7 790 720 6.8 87.5 160 5 900 254HP 575 RGZVESD 1PC28112BD313TA3 3736 SA-7 885 805 7.5 85.5 245 7.5 3600 213HP 575 RGZVESD 1PC28112AA313TA3 2721 SA-7 525 475 8.8 88.5 135 7.5 1800 213HP 575 RGZVESD 1PC28112AB313TA3 2712 SA-7 685 610 9.5 89.5 135 7.5 1200 254HP 575 RGZVESD 1PC28112BC313TA3 3702 SA-7 1130 1025 9.8 89.5 245 7.5 900 256HP 575 RGZVESD 1PC28112BD413TA3 4536 SA-7 1260 1150 11.5 85.5 285 10 3600 215HP 575 RGZVESD 1PC28112AA413TA3 3048 SA-7 530 470 12.0 89.5 160 10 1800 215HP 575 RGZVESD 1PC28112AB413TA3 3051 SA-7 690 605 12.5 89.5 160 10 1200 256HP 575 RGZVESD 1PC28112BC413TA3 4182 SA-7 1140 1015 13.0 89.5 285 10 900 284HP 575 RGZVESD 1PC28112CD313TA3 5513 SA-7 1275 1140 15.0 88.5 485 15 3600 254HP 575 RGZVESD 1PC28112BA313TA3 3514 SA-7 760 670 17.0 90.2 245 245 15 1800 254HP 575 RGZVESD 1PC28112BB313TA3 3645 SA-7 980 870 18.7 91.0 15 1200 284HP 575 RGZVESD 1PC28112CC313TA3 4876 SA-7 1170 985 20.0 90.2 485 15 900 286HP 575 RGZVESD 1PC28112CD413TA3 6705 SA-7 1310 1100 23.0 88.5 520 20 3600 256HP 575 RGZVESD 1PC28112BA413TA3 3843 SA-7 765 665 23.0 90.2 285 20 1800 256HP 575 RGZVESD 1PC28112BB413TA3 4155 SA-7 995 855 26.0 91.0 285 20 1200 286HP 575 RGZVESD 1PC28112CC413TA3 5926 SA-7 1190 965 26.0 90.2 520 20 900 324HP 575 RGZVESD 1PC28113AD313TA3 8187 SA-7 1330 1080 31.0 89.5 565 25 3600 284HP 575 RGZVESD 1PC28112CA313TA3 4135 SA-7 785 645 29.0 91.0 485 25 1800 284HP 575 RGZVESD 1PC28112CB313TA3 4632 SA-7 1020 830 29.0 92.4 485 25 1200 324HP 575 RGZVESD 1PC28113AC313TA3 6934 SA-7 1795 1535 33.0 91.7 565 25 900 326HP 575 RGZVESD 1PC28113AD413TA3 9386 SA-7 2000 1720 38.0 89.5 710 QuikMOD Delivery for stocked motors only. Stock availability subject to change. 2-70 2014 Low Voltage AC Motors Selection and Pricing Guide Stock Prices and Specifications are subject to change without notice. DOE#CC032A RGZVESD – Vertical solid shaft Normal thrust Frame Voltage Type Part Number 30 3600 286HP 575 RGZVESD 1PC28112CA413TA3 4476 30 1800 286HP 575 RGZVESD 1PC28112CB413TA3 5211 30 1200 326HP 575 RGZVESD 1PC28113AC413TA3 30 900 364HP 575 RGZVESD 40 3600 324HP 575 40 1800 324HP 575 40 1200 364HP 40 900 50 50 Cont. Thrust (LBS) FL Amps FL Nom Eff. (%) Lbs SA-7 795 635 34.0 91.0 520 SA-7 1035 815 35.0 92.4 520 7917 SA-7 1820 1510 39.0 91.7 710 1PC28113CD313TA3 10888 SA-7 2320 1860 46.8 91.0 800 RGZVESD 1PC28113AA313TA3 6145 SA-7 1205 1005 45.0 91.7 565 RGZVESD 1PC28113AB313TA3 6207 SA-7 1570 1290 47.0 93.0 565 575 RGZVESD 1PC28113CC313TA3 10365 SA-7 2075 1675 52.0 93.0 800 365HP 575 RGZVESD 1PC28113CD413TA3 13008 SA-7 2340 1840 63.0 91.0 875 3600 326HP 575 RGZVESD 1PC28113AA413TA3 7709 SA-7 1215 995 55.0 92.4 710 1800 326HP 575 RGZVESD 1PC28113AB413TA3 7360 SA-7 1585 1275 58.0 93.0 710 50 1200 365HP 575 RGZVESD 1PC28113CC413TA3 12220 SA-7 2095 1660 66.0 93.0 875 50 900 404HP 575 RGZVESD 1PC28114AD313TA3 15555 SA-7 2370 1810 67.0 91.7 1290 60 3600 364HP 575 RGZVESD 1PC28113CA312TA3 9811 SA-7 1410 1080 68.0 93.0 800 60 1800 364HP 575 RGZVESD 1PC28113CB313TA3 9758 SA-7 1795 1435 71.0 93.6 800 60 1200 404HP 575 RGZVESD 1PC28114AC313TA3 13935 SA-7 2155 1595 74.0 93.6 1290 60 900 405HP 575 RGZVESD 1PC28114AD413TA3 17639 SA-7 2410 1770 78.0 91.7 1420 75 3600 365HP 575 RGZVESD 1PC28113CA413TA3 12128 SA-7 1420 1070 85.0 93.0 875 75 1800 365HP 575 RGZVESD 1PC28113CB413TA3 12168 SA-7 1815 1415 87.0 94.1 875 75 1200 405HP 575 RGZVESD 1PC28114AC413TA3 16339 SA-7 2195 1555 93.0 93.6 1420 75 900 444HP 575 RGZVESD 1PC28114HD113TA3 23134 SA-7 2495 1685 94.0 93.0 1740 3600 405HP 575 RGZVESD 1PC28114AA413TA3 16157 SA-7 1475 1015 108.0 93.6 1420 1800 405HP 575 RGZVESD 1PC28114AB413TA3 15016 SA-7 1915 1315 113.0 94.5 1420 100 1200 444HP 575 RGZVESD 1PC28114HC113TA3 21843 SA-7 2315 1435 117.0 94.1 1740 100 900 445HP 575 RGZVESD 1PC28114HD213TA3 28345 SA-7 2565 1615 123.0 93.0 1930 125 1800 444HP 575 RGZVESD 1PC28114HB113TA3 19658 SA-7 1975 1255 143.0 94.5 1740 125 1200 445HP 575 RGZVESD 1PC28114HC213TA3 26405 SA-7 2385 1365 144.0 94.1 1930 125 900 447HP 575 RGZVESD 1PC28114HD313TA3 32565 SA-7 2670 1510 152.0 93.6 2280 150 1800 445HP 575 RGZVESD 1PC28114HB213TA3 22678 SA-7 2060 1170 170.0 95.0 1930 1200 447HP 575 RGZVESD 1PC28114HC313TA3 32814 SA-7 2400 1350 170.0 95.0 2280 900 447HP 575 RGZVESD 1PC28114HD413TA3 37030 SA-7 2730 1450 186.0 93.6 2280 200 1800 447HP 575 RGZVESD 1PC28114HB313TA3 30998 SA-7 2115 1115 225.0 95.0 2280 200 1200 449HP 575 RGZVESD 1PC28114HC513TA3 37386 SA-7 2450 1300 226.0 95.0 2600 200 900 449HP 575 RGZVESD 1PC28114HD613TA3 41664 SA-7 2800 1380 241.0 94.1 2600 250 1800 449HP 575 RGZVESD 1PC28114HB513TA3 36014 SA-7 2185 1045 281.0 95.0 2600 250 1200 449HP 575 RGZVESD 1PC28114HC613TA3 41115 SA-7 2520 1230 280.0 95.0 2600 Typical Performance Data 150 150 Options Selection and Pricing 100 100 Stock Special Features Detail Dwn Definite Purpose Motors Up Hazardous Duty Motors RPM Mult. Symb. Severe Duty Motors HP List Price $ General Purpose Motors 575V 60Hz Introduction SIMOTICS Definite purpose motors General Dimensions Prices and Specifications are subject to change without notice. DOE#CC032A 2014 Low Voltage AC Motors Selection and Pricing Guide 2-71 Part Number Index QuikMOD Delivery for stocked motors only. Stock availability subject to change. 2014 Low Voltage AC Motors Selection and Pricing Guide 2-72 RGZVILESD – Vertical solid shaft In-Line thrust General Purpose Motors RGZVILESD motors are ideal for dependable and energy efficient operation in applications such as centrifugal and turbine pumps. C US HP range 3 Down thrust: 735 to 1,550 lbs. Up thrust: 785 to 3,735 lbs. Radial thrust: 930 to 2,140 lbs. ee 3-250HP 182LP-449LP Standard (NEMA MG1 Table 12-11) 182LP-449LP 3 phase 60Hz WARRANTY Hazardous Duty Motors Frame Size YEAR Efficiency Voltage 1) 208-230 / 460 V 230 / 460 V 460 V 575 V Insulation Class F Service Factor @ 40ºC Temperature rise (Sine wave) 3-20HP 25-250HP 3-250HP NEMA design B NEMA MG1 Part 31 1.15 Stator Rotor, die cast aluminum Random wound copper 182LP-449LP Cast iron Neoprene gasket 182LP-449LP 182LP-449LP Double shielded Open Bearing housing Bearing housing / bearing cap Grease Inlet / relief fittings 284LP-449LP 182LP-254LP (DE) Cast iron Cast iron / 182LP-449LP Polyurea base Alemite / plug Cast iron Bidirectional fan 143LP-256LP 182LP-449LP Nameplate Lifting eyebolt Paint Rust resistant Stainless steel engraved NA Alkyd - RAL7030 Variable torque 20:1 Constant torque 4:1 182LP-449LP 182LP-449LP Frame Special Features Detail Condensation drains High strength carbon steel shaft V ring slinger - IP54 Class B @ 1.0SF Class F @ 1.15SF Cast iron T-drain C1045 DE & NDE Definite Purpose Motors Insulation Stator/Windings rotor Conduit box (oversize) Options Selection and Pricing Bearings Bearing cape Fan and fan cover Polypropylene Typical Performance Data Hardware Severe Duty Motors ® Introduction SIMOTICS Definite purpose motors Zinc plated Epoxy enamel Inverter duty Warranty 36 months Hazardous classification General Dimensions NA Service factor 1.0 Service factor 1.15 2014 Low Voltage AC Motors Selection and Pricing Guide 2-73 Part Number Index 1) Standard voltage for stock items, see option selection and pricing section for additional voltages. SIMOTICS Definite purpose motors RGZVILESD – Vertical solid shaft In-Line thrust 460V 60Hz Cont. Thrust LBS. HP RPM Frame Voltage Type Part Number List Price $ Mult. Symb. Up Dwn Rdl. FL Amps FL Nom Eff. (%) Lbs 3 3600 182LP 230/460 RGZVILESD 1PC28311DA416TA3 2138 SA-7EN 785 735 930 3.6 85.5 133 3 1800 182LP 230/460 RGZVILESD 1PC28311DB416TA3 2082 SA-7EN 980 910 1160 3.9 87.5 133 3 1200 213LP 230/460 RGZVILESD 1PC28312AC516TA3 2488 SA-7EN 1115 1055 1320 4.0 87.5 215 5 3600 184LP 230/460 RGZVILESD 1PC28311DA516TA3 2362 SA-7EN 785 735 930 5.8 87.5 144 5 1800 184LP 230/460 RGZVILESD 1PC28311DB516TA3 2233 SA-7EN 980 910 1160 6.5 87.5 144 5 1200 215LP 230/460 RGZVILESD 1PC28312AC616TA3 3237 SA-7EN 1120 1050 1320 6.8 87.5 160 7.5 3600 213LP 230/460 RGZVILESD 1PC28312AA516TA3 2835 SA-7EN 785 735 930 8.8 88.5 215 7.5 1800 213LP 230/460 RGZVILESD 1PC28312AB516TA3 2825 SA-7EN 980 910 1160 9.5 89.5 215 7.5 1200 254LP 230/460 RGZVILESD 1PC28312BC516TA3 3856 SA-7EN 1350 1240 1600 9.8 89.5 245 10 3600 215LP 230/460 RGZVILESD 1PC28312AA616TA3 3175 SA-7EN 790 730 930 12.0 89.5 160 10 1800 215LP 230/460 RGZVILESD 1PC28312AB616TA3 3178 SA-7EN 985 905 1160 12.5 89.5 160 10 1200 256LP 230/460 RGZVILESD 1PC28312BC616TA3 4354 SA-7EN 1360 1230 1600 13.0 89.5 330 15 3600 254LP 230/460 RGZVILESD 1PC28312BA516TA3 3659 SA-7EN 945 855 1100 17.0 90.2 245 15 1800 254LP 230/460 RGZVILESD 1PC28312BB516TA3 3799 SA-7EN 1185 1075 1400 18.7 91.0 245 15 1200 284LPH 230/460 RGZVILESD 1PC28312EC116TA3 5243 SA-7EN 1975 1785 2120 20.0 90.2 375 20 3600 256LP 230/460 RGZVILESD 1PC28312BA616TA3 4106 SA-7EN 950 850 1100 23.0 90.2 285 20 1800 256LP 230/460 RGZVILESD 1PC28312BB616TA3 4327 SA-7EN 1200 1060 1400 26.0 91.0 285 20 1200 286LPH 230/460 RGZVILESD 1PC28312EC416TA3 6174 SA-7EN 1990 1770 2120 26.0 90.2 520 25 3600 284LPH 460 RGZVILESD 1PC28312EA112TA3 4903 SA-7EN 1460 1320 1475 29.0 91.0 375 25 1800 284LPH 460 RGZVILESD 1PC28312EB112TA3 4825 SA-7EN 1725 1535 1850 29.0 92.4 375 25 1200 324LP 460 RGZVILESD 1PC28313AC512TA3 7220 SA-7EN 2010 1750 1875 33.0 91.7 565 30 3600 286LPH 460 RGZVILESD 1PC28312EA412TA3 5202 SA-7EN 1470 1310 1475 34.0 91.0 430 30 1800 286LPH 460 RGZVILESD 1PC28312EB412TA3 5428 SA-7EN 1740 1520 1850 35.0 92.4 430 30 1200 326LP 460 RGZVILESD 1PC28313AC612TA3 8071 SA-7EN 2035 1725 1875 39.0 91.7 600 40 3600 324LP 460 RGZVILESD 1PC28313AA512TA3 6937 SA-7EN 1490 1290 1600 45.0 91.7 565 40 1800 324LP 460 RGZVILESD 1PC28313AB512TA3 6727 SA-7EN 1770 1490 1650 47.0 93.0 565 40 1200 364LP 460 RGZVILESD 1PC28313CC512TA3 10271 SA-7EN 2540 2140 2120 52.0 93.0 800 50 3600 326LP 460 RGZVILESD 1PC28313AA612TA3 8500 SA-7EN 1505 1275 1600 55.0 92.4 600 50 1800 326LP 460 RGZVILESD 1PC28313AB612TA3 7893 SA-7EN 1785 1475 1650 58.0 93.0 600 50 1200 365LP 460 RGZVILESD 1PC28313CC612TA3 12085 SA-7EN 2560 2120 2120 66.0 93.0 875 60 3600 364LP 460 RGZVILESD 1PC28313CA512TA3 10579 SA-7EN 1840 1510 1475 68.0 93.0 800 60 1800 364LP 460 RGZVILESD 1PC28313CB512TA3 10527 SA-7EN 2330 2060 1850 71.0 93.6 800 60 1200 404LP 460 RGZVILESD 1PC28314AC512TA3 13777 SA-7EN 2620 2060 2120 74.0 93.6 1290 75 3600 365LP 460 RGZVILESD 1PC28313CA612TA3 12896 SA-7EN 1850 1500 1475 85.0 93.0 875 75 1800 365LP 460 RGZVILESD 1PC28313CB612TA3 12937 SA-7EN 2345 1945 1850 87.0 94.1 875 75 1200 405LP 460 RGZVILESD 1PC28314AC612TA3 16205 SA-7EN 2660 2020 2120 93.0 93.6 1300 100 3600 405LP 460 RGZVILESD 1PC28314AA612TA3 17399 SA-7EN 1905 1445 1475 108.0 93.6 1300 100 1800 405LP 460 RGZVILESD 1PC28314AB612TA3 15720 SA-7EN 2445 1845 1850 113.0 94.5 1300 100 1200 444LP 460 RGZVILESD 1PC28314JC112TA3 21501 SA-7EN 2780 1900 2120 117.0 94.1 1740 125 1800 444LP 460 RGZVILESD 1PC28314JB112TA3 19973 SA-7EN 2530 1760 1850 143.0 94.5 1740 125 1200 445LP 460 RGZVILESD 1PC28314JC212TA3 27763 SA-7EN 2850 1830 2120 144.0 94.1 1930 150 1800 445LP 460 RGZVILESD 1PC28314JB212TA3 23321 SA-7EN 2590 1700 1850 170.0 95.0 1930 150 1200 447LP 460 RGZVILESD 1PC28314JC312TA3 32289 SA-7EN 2945 1735 2120 170.0 95.0 2280 200 1800 447LP 460 RGZVILESD 1PC28314JB312TA3 30506 SA-7EN 2650 1645 1850 225.0 95.0 2280 200 1200 449LP 460 RGZVILESD 1PC28314JC512TA3 32345 SA-7EN 3040 1640 2120 226.0 95.0 2600 250 1800 449LP 460 RGZVILESD 1PC28314JB512TA3 33421 SA-7EN 2710 1590 1850 281.0 95.0 2600 250 1200 449LP 460 RGZVILESD 1PC28314JC612TA3 34992 SA-7EN 3735 1550 2120 280.0 95.0 2600 QuikMOD Delivery for stocked motors only. Stock availability subject to change. Prices and Specifications are subject to change without notice. 2-74 2014 Low Voltage AC Motors Selection and Pricing Guide Stock RGZVILESD – Vertical solid shaft In-Line thrust Cont. Thrust LBS. HP RPM Frame Voltage Type Part Number List Price $ Mult. Symb. Up Dwn Rdl. FL Amps FL Nom Eff. (%) Lbs 3 3600 182LP 575 RGZVILESD 1PC28311DA413TA3 2138 SA-7EN 785 735 930 3.6 85.5 133 1800 182LP 575 RGZVILESD 1PC28311DB413TA3 2082 SA-7EN 980 910 1160 3.9 87.5 133 1200 213LP 575 RGZVILESD 1PC28312AC513TA3 2488 SA-7EN 1115 1055 1320 4.0 87.5 215 5 3600 184LP 575 RGZVILESD 1PC28311DA513TA3 2362 SA-7EN 785 735 930 5.8 87.5 144 5 1800 184LP 575 RGZVILESD 1PC28311DB513TA3 2233 SA-7EN 980 910 1160 6.5 87.5 144 575 RGZVILESD 1PC28312AC613TA3 3237 SA-7EN 1120 1050 1320 6.8 87.5 160 575 RGZVILESD 1PC28312AA513TA3 2835 SA-7EN 785 735 930 8.8 88.5 215 7.5 1800 213LP 575 RGZVILESD 1PC28312AB513TA3 2825 SA-7EN 980 910 1160 9.5 89.5 215 7.5 1200 254LP 575 RGZVILESD 1PC28312BC513TA3 3856 SA-7EN 1350 1240 1600 9.8 89.5 245 10 3600 215LP 575 RGZVILESD 1PC28312AA613TA3 3175 SA-7EN 790 730 930 12.0 89.5 160 10 1800 215LP 575 RGZVILESD 1PC28312AB613TA3 3178 SA-7EN 985 905 1160 12.5 89.5 160 10 1200 256LP 575 RGZVILESD 1PC28312BC613TA3 4354 SA-7EN 1360 1230 1600 13.0 89.5 330 15 3600 254LP 575 RGZVILESD 1PC28312BA513TA3 3659 SA-7EN 945 855 1100 17.0 90.2 245 15 1800 254LP 575 RGZVILESD 1PC28312BB513TA3 3799 SA-7EN 1185 1075 1400 18.7 91.0 245 15 1200 284LPH 575 RGZVILESD 1PC28312EC113TA3 5243 SA-7EN 1975 1785 2120 20.0 90.2 375 20 3600 256LP 575 RGZVILESD 1PC28312BA613TA3 4106 SA-7EN 950 850 1100 23.0 90.2 285 20 1800 256LP 575 RGZVILESD 1PC28312BB613TA3 4327 SA-7EN 1200 1060 1400 26.0 91.0 285 20 1200 286LPH 575 RGZVILESD 1PC28312EC413TA3 6174 SA-7EN 1990 1770 2120 26.0 90.2 520 25 3600 284LPH 575 RGZVILESD 1PC28312EA113TA3 4903 SA-7EN 1460 1320 1475 29.0 91.0 375 25 1800 284LPH 575 RGZVILESD 1PC28312EB113TA3 4825 SA-7EN 1725 1535 1850 29.0 92.4 375 25 1200 324LP 575 RGZVILESD 1PC28313AC513TA3 7220 SA-7EN 2010 1750 1875 33.0 91.7 565 30 3600 286LPH 575 RGZVILESD 1PC28312EA413TA3 5202 SA-7EN 1470 1310 1475 34.0 91.0 430 30 1800 286LPH 575 RGZVILESD 1PC28312EB413TA3 5428 SA-7EN 1740 1520 1850 35.0 92.4 430 30 1200 326LP 575 RGZVILESD 1PC28313AC613TA3 8071 SA-7EN 2035 1725 1875 39.0 91.7 600 565 40 3600 324LP 575 RGZVILESD 1PC28313AA513TA3 6937 SA-7EN 1490 1290 1600 45.0 91.7 40 1800 324LP 575 RGZVILESD 1PC28313AB513TA3 6727 SA-7EN 1770 1490 1650 47.0 93.0 565 40 1200 364LP 575 RGZVILESD 1PC28313CC513TA3 10271 SA-7EN 2540 2140 2120 52.0 93.0 800 600 3600 326LP 575 RGZVILESD 1PC28313AA613TA3 8500 SA-7EN 1505 1275 1600 55.0 92.4 50 1800 326LP 575 RGZVILESD 1PC28313AB613TA3 7893 SA-7EN 1785 1475 1650 58.0 93.0 600 50 1200 365LP 575 RGZVILESD 1PC28313CC613TA3 12085 SA-7EN 2560 2120 2120 66.0 93.0 875 60 3600 364LP 575 RGZVILESD 1PC28313CA513TA3 10579 SA-7EN 1840 1510 1475 68.0 93.0 800 60 1800 364LP 575 RGZVILESD 1PC28313CB513TA3 10527 SA-7EN 2330 2060 1850 71.0 93.6 800 60 1200 404LP 575 RGZVILESD 1PC28314AC513TA3 13777 SA-7EN 2620 2060 2120 74.0 93.6 1290 75 3600 365LP 575 RGZVILESD 1PC28313CA613TA3 12896 SA-7EN 1850 1500 1475 85.0 93.0 875 75 1800 365LP 575 RGZVILESD 1PC28313CB613TA3 12937 SA-7EN 2345 1945 1850 87.0 94.1 875 75 1200 405LP 575 RGZVILESD 1PC28314AC613TA3 16205 SA-7EN 2660 2020 2120 93.0 93.6 1300 405LP 575 RGZVILESD 1PC28314AA613TA3 17399 SA-7EN 1905 1445 1475 108.0 93.6 1300 405LP 575 RGZVILESD 1PC28314AB613TA3 15720 SA-7EN 2445 1845 1850 113.0 94.5 1300 100 1200 444LP 575 RGZVILESD 1PC28314JC113TA3 21501 SA-7EN 2780 1900 2120 117.0 94.1 1740 125 1800 444LP 575 RGZVILESD 1PC28314JB113TA3 19973 SA-7EN 2530 1760 1850 143.0 94.5 1740 125 1200 445LP 575 RGZVILESD 1PC28314JC213TA3 27763 SA-7EN 2850 1830 2120 144.0 94.1 1930 150 1800 445LP 575 RGZVILESD 1PC28314JB213TA3 23321 SA-7EN 2590 1700 1850 170.0 95.0 1930 150 1200 447LP 575 RGZVILESD 1PC28314JC313TA3 32289 SA-7EN 2945 1735 2120 170.0 95.0 2280 200 1800 447LP 575 RGZVILESD 1PC28314JB313TA3 30506 SA-7EN 2650 1645 1850 225.0 95.0 2280 200 1200 449LP 575 RGZVILESD 1PC28314JC513TA3 32345 SA-7EN 3040 1640 2120 226.0 95.0 2600 250 1800 449LP 575 RGZVILESD 1PC28314JB513TA3 33421 SA-7EN 2710 1590 1850 281.0 95.0 2600 250 1200 449LP 575 RGZVILESD 1PC28314JC613TA3 34992 SA-7EN 3735 1550 2120 280.0 95.0 2600 General Dimensions 3600 1800 Typical Performance Data 100 100 Options Selection and Pricing 50 Special Features Detail 215LP 213LP Definite Purpose Motors 1200 3600 Hazardous Duty Motors 5 7.5 Severe Duty Motors 3 3 Stock 2-75 Part Number Index QuikMOD Delivery for stocked motors only. Stock availability subject to change. Prices and Specifications are subject to change without notice. 2014 Low Voltage AC Motors Selection and Pricing Guide General Purpose Motors 575V 60Hz Introduction SIMOTICS Definite purpose motors General Purpose Motors Severe Duty Motors Hazardous Duty Motors Special Features Detail Options Selection and Pricing Typical Performance Data General Dimensions Part Number Index 3-1 2014 Low Voltage AC Motors Selection and Pricing Guide Definite Purpose Motors Introduction SIMOTICS NEMA Motors Modifications Special features detail Special features detail Siemens offers a wide selection of options to increase the suitability of our motors to the specific customer needs. They are classified in three different categories: QM = QuikMOD Siemens QuikMOD program provides “quik” deliveries for a wide selection of motor modifications directly from our modification center in Southaven MS. MOD = Modification: The modifications under this program are more complex in nature or require certain level of review before the modification can take place. Delivery time is built as a commitment between efficient engineering work and performance on the floor, typically less than 2 weeks. Custom: Siemens can build your motor to your specific needs, all you have to do is pick the right option. Custom option, Modifications and QuikMOD selections can be combined to fulfill your needs. Please contact Siemens for your specific delivery. Definitions: Part Number – Consists of a combination of 16 figures and letters structured to describe the characteristics of the NEMA motor for order entry. Please refer to Section 1 for the complete part numbering system. Example: 1LE21212AB214AA3 - GP100A, 10HP, 1800RPM, 208-230/460V, 215T, horizontal foot-mounted Part Number Positioning 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 L E 2 1 1 1 2 A A 2 1 4 A A 3 Order Code – Figures or letters describing the QuikMOD or Custom Option. Order Code Position – The position within the Part Number that the QuikMOD or Custom Option Order Code would be added. Ordering Instructions: 1. Select a stock motor from the Motor Selection and Pricing Section. (Note Part Number) 2. Verify applicability of desired Option(s) at the end of the section. (Per motor type and frame) 3. Select applicable Option(s). (Note Order Code, Order Code Position and List Price Adder) 4. Construct new Part Number and List Price. (See example below) a. If the Order Code Position is 12, 13, 14, 15 or 16, replace the figure(s) or letter(s) at the same position in the stock motor Part Number with the Custom Option Order Code. b. If the Option Order Code Position is Z, add a ‘-Z’ to the end of the stock motor Part Number. Then add a ‘+’ sign followed by the Custom Option Order Code. Custom Options combined with QuikMOD Motor Pricing Example: Example: 15HP, 1800RPM, 208-230/460V, 254T, SD100, Copper Rotor, D-flange with feet, PTC thermistors (3 embedded temperature sensors for tripping) with condulet to main box and Class H insulation. Base List Price: $2,131 Part Number 1LE23112BB114AA3 List Price Adders: D-Flange with Feet $ 774 Order Code F, Order Code Position 14 PTC Thermistors $ 634 Order Code B, Order Code Position 15 Condulet to Main Box $ 251 Order Code J02, Order Code Position Z Class H Insulation $ 157 Order Code C00, Order Code Position Z Total List Price: $3,947 New Part Number – 1LE23112BB114FB3-Z + J02+C00 Delivery: Please contact Siemens for delivery 3-2 2014 Low Voltage AC Motors Selection and Pricing Guide Introduction Special features detail 3300 ft (1000m) 6600 ft (2000m) 9900 ft (3000m) 40ºC (104ºF) 30ºC (56ºF) 20ºC (68ºF) Siemens SIMOTICS motors can be furnished in assemblies shown. When motors are ordered according to a particular mounting, bearing brackets are assembled and grease fittings are properly installed for operation with the motor in the position shown. However, no attempt is made to locate fittings on any particular side of the motor. ASSEMBLY W-5** ASSEMBLY W-6** ASSEMBLY W-7** ASSEMBLY W-8** CEILING MOUNTINGS Assembly F-1, W-3, W-6, W-8 and C-2 – Standard Lead Location Assembly F-2, W-1, W-4, W-5, W-7 and C-1 – Lead Location Opposite Standard CAUTION: ** Horizontal ball bearing motors assembly W-5, W-6, W-7 and W-8 are not suitable for external thrust in excess of the weight of the rotor and half-coupling. Options Selection and Pricing ASSEMBLY C-1 ASSEMBLY C-2 Special Features Detail ASSEMBLY W-1 ASSEMBLY W-2 ASSEMBLY W-3 ASSEMBLY W-4 Definite Purpose Motors WALL MOUNTINGS Ambient Temperature Hazardous Duty Motors ASSEMBLY F-1 ASSEMBLY F-2* Severe Duty Motors FLOOR MOUNTINGS Maximum Altitude in Feet General Purpose Motors Altitude TEFC (General Purpose & Severe Duty) motors with a 1.15 service factor in a 40°C ambient at 3300 feet will operate at a 1.0 service factor in a 40°C ambient at altitudes up to 9900 feet. For altitudes greater than 9900 feet, please consult Siemens. Standard motors will operate at their rated service factor at altitudes above 3300 feet at the corresponding ambient temperatures as shown in the following table. Ambient TEFC (General Purpose & Severe Duty) motors with a 1.15 service factor in a 40°C ambient at 3300 feet will operate at a 1.0 service factor at 3300 feet altitude up to a 55°C ambient. For ambients greater than 55°C or below -25°C, please consult Siemens. Assembly - Mounting and Terminal Box Position Typical Performance Data General Dimensions 3-3 Part Number Index 2014 Low Voltage AC Motors Selection and Pricing Guide Special features detail Hardware Stainless steel hardware, limited to bearing housing bolts, terminal housing bolts, and breather drains only. Hazardous Duty – Rerate SIMOTICS motor type XP100 (Class I, Group C&D, Class II, Groups F & G, Division 1) with 1.0 service factor can be re-nameplated to 1.15 service factor for 140-250 frame motors only. Frequency Change The following tabulation shows the synchronous speeds 60 Hertz50 Hertz. For different frequencies or adjustable frequency applications, contact Siemens. To derate a continuous duty 60 hertz motor to a continuous 50 hertz motor, use the modifiable list price of the next larger HP 60 hertz motor and add the list price as shown in the table. Motor will be Class F, 1.15 service factor. Service Factor For non-standard service factor, contact Siemens. Space Heaters Leads marked H1 & H2 List price addition covers space heaters installed in motors with leads terminated in the main conduit box. NEC (2011) requires any Division 2 motor that is not agency certified and is a general purpose non-explosion enclosure to permanently mark on a visible nameplate on the motor surface the max surface temp based on 40°C ambient – this plate will show 200°C. CAUTION: Use in Division 2 areas with ignition temperatures below 250°C (250 x .80 = 200) should be avoided. [Reference: 501-8(b)]. 3-4 2014 Low Voltage AC Motors Selection and Pricing Guide No. of Poles Speed (RPM) 60 Hertz 50 Hertz 2 3600 3000 4 1800 1500 6 1200 1000 8 900 750 For hazardous duty motors, contact Siemens. Introduction Special features detail General Purpose Motors Balance All SIMOTICS motors are dynamically balanced to commercial limits measure in accordance with NEMA MG1-12.06. Modified motors can be built to exceed standard commercial limits based on Table 1 below. Severe Duty Motors Extra Precision 284T 364T 326T 449T mils P/P 0.3 0.4 0.3 0.4 2000 - 2999 1.5 0.5 0.75 0.2 0.3 0.4 3000 - 4000 1.0 0.5 0.75 0.2 0.3 0.4 364T 143T 449T 256T Hazardous Duty Motors Balance Limits Maximum amplitude, inches, peak to peak Balance NEMA Precision RPM 143T 143T 364T 143T 449T 326T 449T 256T mils P/P mils P/P 0 - 999 2.5 0.5 0.75 0.2 1000 - 1999 2.0 0.5 0.75 0.2 Balance NEMA RPM 143T Precision 143T 449T 326T in/sec Definite Purpose Motors Velocity, inches, inches/seconds Extra Precision in/sec 284T 364T 326T 449T in/sec 0.1308 0.0262 0.0392 0.1050 0.0157 0.0209 0.2093 0.0523 0.0785 0.0209 0.0314 0.0419 2000 - 2999 0.2355 0.0785 0.1178 0.0314 0.0471 0.0628 3000 - 4000 0.2094 0.1047 0.1571 0.0419 0.0628 0.0838 Special Features Detail 0 - 999 1000 - 1999 Options Selection and Pricing NOTE: IN P-P refers to amplitude displacement. NEMA unfiltered velocity limit 0.15 in/s peak. IEEE Std 841 unfiltered velocity limit 0.08 in/s peak. NOTE: For balance limits greater than Precision balance, contact factory. Typical Performance Data Bearings Insulated bearings are only available as sealed bearings. Motors having roller bearings (444T to 449T) require a minimum radial load. Use of these motors in direct connected applications is discouraged to avoid excessive drive end bearing noise and/or reduced bearing life. Connections Part Winding Start - Starting torques are reduced at the motor shaft. Wye Start - Delta Run - Starting torques are reduced at the motor shaft. Standard 50 hertz voltages are 220, 380, 400, 415, 440, 550 and 220/380. Standard 60 hertz voltages are 200, 230, 460, 575 and 230/460. General Dimensions 3-5 Part Number Index 2014 Low Voltage AC Motors Selection and Pricing Guide Bo Ma x - O p in Bo posi x te ry of ilia Au x ule t Ma - opp in o B o s i te x to nd ain oM Bo xt ry J02 J03 J04 J05 J06 J10 J12 J13 J14 J15 J16 KTY84 Temperature Sensors J20 J22 J23 J24 J25 J26 Space Heaters J50 J52 J53 J54 J55 J56 Couplings – Customer Supplied Rigid couplings, flexible couplings, pinions and V-belt sheaves can be pressed on at List Price adders per the table below. Couplings, pinions or sheaves must be finish bored and keyseated to Siemens SIMOTICS shaft dimensions and must be shipped to the plant freight prepaid. 3-6 2014 Low Voltage AC Motors Selection and Pricing Guide Ex J00 Thermostats Co Au x ilia ule nd PTC Thermistors Co Co nd ule t- t t Ma oM in ain Bo xs Bo x ide Bo x Auxiliary Boxes plo Op sion po P s i t ro o eo fC f M on ain dul B o et x Special features detail Introduction Special features detail Protective Devices Winding Protection Control Modules are available for thermistors. Order Code A90. Add $725 List. Shipped loose for customer installation. Price does not include temperature readout devices. Contact factory for other resistance values. Thermistors – leads marked PM1 & PM2 Bearing Protection Price does not include temperature readout devices. Contact factory for other resistance values. Severe Duty Motors Hazardous Duty Motors Definite Purpose Motors Class II: Gr. E Atmospheres containing metal dust Gr. F Atmospheres containing carbon black, coal or coke dust. Gr. G Atmospheres containing grain dust. For de-rate of XP100 motors, please consult factory. Paint Siemens standard finish paint consists of the following: Modified Alkyd. Viscosity: 28-30 seconds No.2 Zahn cup @ 77°F Fineness: 7 N.S. units Hegeman gage Adhesion: 90% Cross-hatch test (tape) Impact resistance: 40 inch pounds direct - No cracks Composition: Lead and Chromate free Color: RAL 7030 stone gray General Purpose Motors Hazardous Duty Motors Class I: Gr. B Hydrogen (not available) Gr. C Atmospheres containing ethyl and ether vapor Gr. D Atmospheres containing gasoline, petroleum, naphtha, alcohols, acetone lacquer solvent vapors and natural gas. Special Features Detail Options Selection and Pricing Typical Performance Data General Dimensions 3-7 Part Number Index 2014 Low Voltage AC Motors Selection and Pricing Guide Special features detail Shafts Standard dimensions are shown in the Dimensions section. The following opposite drive end standard double-end shafts are available as custom built motors. Shaft dimensions not shown should be referred to your Siemens Representative for quotation. Double-End Shafts, Standard Steel – Drive End Standard – Opposite Drive End as Follows Order Code - M52 NEMA Standard Long Shaft Frame FU Key FN-FW FV Key Length FN-FW FV Key Length 143-145T 0.625 0.188 - - - 162 1.38 0.91 182-184T 0.875 0.188 - - - 2.25 2.00 1.41 213-215T 1.125 0.25-0.25 - - - 2.75 2.50 1.75 254-156T 1.375 .312-.312 - - - 3.37 3.12 2.37 2.87 284-286T 1.625 .375-.375 3.25 3 1.87 4 3.75 324-326T 1.875 .50-.50 3.75 3.50 2 4.62 4.37 3.25 364-365T 1.875 .50-.50 3.75 3.50 2 4.62 4.37 3.25 404-405T 2.125 .50-.50 4.25 4 2.75 5.25 5 3.87 444-449T 2.375 .625-.625 4.75 4.50 3 5.87 5.62 4.25 Testing Complete Test Complete test consists of the following items tested in accordance with NEMA and IEEE-112 test standards. • Full Load Heat Run • Temperature Rise at F.L. • Winding Resistance • Rated F.L. Slip • No Load Current • Breakdown Torque • Locked Rotor Torque-Amps • High Potential Tests • Efficiencies @ 100, 75, 50 Percent Load • Power Factor @ 100, 75, 50 Percent Load Test report of complete test is based on IEEE Std. Form A-2 and includes complete nameplate information. Routine Test Routine test consists of the following items tested in accordance with IEEE standard 112. • No Load Current • No Load Speed • Locked-Rotor Current • Winding Resistance • High Potential • Bearings/Vibration Check Vibration data is NOT recorded with a routine test. If required, please add. Test report of routine test is based on IEEE Std. 112 Form A-1 and includes complete nameplate information. 3-8 Order Code - M53 NEMA Standard Short Shaft Calibration Tests Calibration tests consist of 0-125% rated load test measurement of speed, torque, current, power factor and efficiency, at rated voltage. Data is curve rated voltage. Data is curve plotted, on Siemens standard format. Foot mounted motors only. Special Tests For tests or reporting format other than those listed below, contact Siemens with complete specification, for price additions. Customers will be notified approximately 2 weeks before witnessed testing. Refer to Siemens for prices of test reports for adjustable speed drives. Multispeed motor test reports are priced based upon the number of speeds tested. List prices are at the following percentage of the single speed price: One speed tested 100% Two speeds tested 150% Pricing: Five copies of each test report are provided on 8.5” x 11” paper suitable for reproduction. Additional copies are available for $55 List per copy. Vertical Jacking Provisions This option is provided on foot mounted motors only. It is used to assist the installer in proper alignment of the motor shaft with the driven piece of equipment for shimming purposes. Siemens will provide the tapped hole (one per foot), four per motor. A 1/2-13 UNC threaded hole will be provided on 280T frame, a 3/4-10 UNC threaded hole on 320T-360T and a 7/8-14 UNF threaded hole on 400T-440T frames. The customer is responsible for providing the bolts. 2014 Low Voltage AC Motors Selection and Pricing Guide V-belt sheave RPM Recommended sheave diameters Frame Narrow V 1 Min. dia. Std. V2 Min. dia. 900 404T 8.4 9.0 60 1800 364T 7.4 7.4 60 1200 404T 8.0 9.0 60 900 405T 10.0 10.0 75 1800 365T 8.6 9.0 75 1200 405T 10.0 10.0 75 900 444T 9.5 13.0 100 1800 405T 8.6 10.0 100 1200 444T 10.0 11.8 445T 12.0 15.0 1800 444T 10.5 12.0 125 1200 445T 12.4 15.2 125 900 447T 14.0 18.5 150 1800 445T 10.5 13.2 150 1200 447T 11.6 16.1 900 447T 14.6 24.7 1800 447T 13.2 15.8 200 1200 449T 14.6 25.0 200 900 449T 18.0 – 250 1800 449T 13.0 18.4 250 1200 449T 18.2 – 250 900 S449LS 19.8 – 300 1800 449T 15.4 24.8 300 1200 S449LS 18.4 – 1800 S449LS 15.8 – 1200 S449LS 21.0 – 400 1800 S449LS 18.0 – Options Selection and Pricing 350 350 Special Features Detail 15 200 Definite Purpose Motors 900 125 Hazardous Duty Motors 100 Severe Duty Motors 50 General Purpose Motors HP Introduction Special features detail Typical Performance Data Notes: 1. Example: 3V, 5V, 8V. Sheave face cannot overhand end of shaft. 2. Example: A, B, C, D section. Center of sheave width cannot overhang end of shaft. 3. Do not exceed belt service factor of 1.6. Follow manufacturer’s instructions for alignment and belt tensioning. Position sheaves as close to the drive end bearing as possible. (Maximum 1/2” from shaft shoulder). 4. Maximum speed reduction of 5:1. 5. Shaft center distance approximately equal to diameter of largest sheave. 6. All dimensions in inches. General Dimensions 3-9 Part Number Index 2014 Low Voltage AC Motors Selection and Pricing Guide Options selection and pricing Voltage (MLFB Digits 12 & 13) Single Speed, Voltage Across the Line GP100A Part Winding Start 230V 460V 575V 208-230/460 230/460V 460V D 60Hz 575V D 60HZ 11 12 13 14 16 22 23 QM V1) QM V1) 140-250 140-250 QM V1) 140-250 HP 1-75 Std: HP > 75 HP 1-20 Std: HP > 20 Std. 140-250 Std. 140-250 Std. 140-250 140-250 NA NA 140-250 Std: FS 280 - HP 75 280-440 280-440 GP100 HP 1-75 SD100 HP 1-75 1-75 HP 280-S440 280-S440 SD100 IEEE841 HP 1-75 Std 140-S440 140-S440 NA NA 280-S440 280-S440 SD661 180-360 Std: 180-360 180-360 NA NA 280-360 280-360 NA Std: 140-S440 NA NA NA 280-S440 280-S440 Std. 140-250 Std. 140-250 140-250 Std: FS 280 - HP 100 140-250 Std: FS 280 - HP 100 280-440 280-440 280-440 280-440 RGZ(K)ESDI XP100 1-100 HP XP100 ID1 1-100 HP SD10 MS RGZV(IL)ESD 140-440 140-S440 HP 1-100 Std: HP > 100 HP 1-100 Std: HP > 100 140-440 140-440 NA NA NA NA NA NA NA HP I-20 HP 1-20 Std: HP >20 140-440 NA HP 25-75 Std: HP < 25 280-440 280-440 Wye Start –Delta Run Multi-Speed 4/8 Poles Special Voltage 460V 60Hz 575V 60HZ 460V 575V 200-460V 461-600V 32 33 40 44 90+M1Y 90+M2Y GP100A NA NA NA NA 140-250 140-250 GP100 280-440 280-440 NA NA 140-440 140-440 SD100 280-S440 280-S440 NA NA 140-S440 140-S440 SD100 IEEE841 280-S440 280-S440 NA NA 140-S440 V2) 140-S440 V2) 140-360 V2) SD661 280-360 280-360 NA NA 140-360 V2) RGZ(K)ESDI 280-S440 280-S440 NA NA NA NA XP100 280-440 280-440 NA NA 140-440 140-440 XP100 ID1 280-440 280-440 NA NA 140-440 140-440 SD10 MS NA NA Std 140-440 140-440 140-440 280-440 280-440 NA NA 140-440 140-440 RGZV(IL)ESD List Price Single Speed Part Winding Start Multi-Speed Special Voltage 230V 460V 575V 208230/460 230/460V 460V D 60Hz 460V 60Hz 575V 60HZ 460V 575V 200-460V 461-600V 11 12 13 14 16 22 23 32 33 40 44 90+M1Y 90+M2Y 140 123 123 0 0 119 – – – – 0 0 120 120 180 123 123 0 0 123 – – – – 0 0 120 120 210 138 138 0 0 133 – – – – 0 0 120 250 159 159 0 0 154 – – - - 0 0 166 120 166 280 161 161 – – 165 165 165 165 165 0 0 200 200 320 161 161 – – 200 200 200 200 200 0 0 482 482 360 191 191 – – 294 294 294 294 294 0 0 546 546 400 191 191 – – 461 461 461 461 461 0 0 714 714 440 230 230 – – 767 767 767 767 767 0 0 1187 1187 S449 – – – – 768 768 768 768 768 0 0 1486 1486 V1) QuikMOD only for 208-230/460V and 230/460V stock motors. V2) Only single voltage is allowed. 3-10 2014 Low Voltage AC Motors Selection and Pricing Guide 575V D 60HZ Wye Start – Delta Run Introduction Options selection and pricing General Purpose Motors Flanges and Bearing Housing H1) (MLFB Dig. 14) Foot Mounted End Shield C - Face A C - Face w/Drip Cover D - Flange D - Flange w/Drip Cover E F N P QM 140-440 H3) QM 140-250 H4), H5) QM 140-400 H6) QM 140-250 H4), H5) 140-250 140-250 140-250 140-250 Std 140-440 140-440 140-440 140-440 SD100 Std 140-S440 140-S440 140-440 140-440 SD100 IEEE841 Std 140-S440 H2) 140-S440 H2) 140-440 H2) 140-440 H2) SD661 Std 180-360 H3) 180-360 H5), H6) 180-360 H7) 180-360 H5), H6) RGZ(K)ESDI XP100 Std 140-440 140-440 140-440 140-440 Std 140-440 280-440 140-440 280-440 XP100 ID1 Std 140-440 280-440 140-440 280-440 SD10 MS Std 140-440 140-440 140-440 140-440 RGZV(IL)ESD NA NA NA NA NA Hazardous Duty Motors Std GP100 Severe Duty Motors GP100A Round Body C - Face C - Face w/Drip Cover D - Flange D - Flange w/Drip Cover H L M MOD 140-250 H4) MOD 140-250 H4) MOD 140-250 H4) GP100A 140-250 140-250 NA NA GP100 140-440 140-440 140-440 140-440 SD100 SD100 IEEE841 140-440 140-440 140-440 140-440 140-440 H2) 140-440 H2) 140-440 H2) 140-440 H2) SD661 NA NA NA NA 140-250 140-250 140-250 140-250 140-440 280-440 140-440 280-440 XP100 ID1 140-440 280-440 140-440 280-440 SD10 MS 140-250 140-250 140-250 140-250 NA NA NA NA RGZV(IL)ESD Special Features Detail RGZ(K)ESDI XP100 Definite Purpose Motors G QM 140-250 H4) List Price Foot Mounted C - Face D - Flange D - Flange w/Drip Cover C - Face D - Flange C - Face w/Drip Cover D - Flange w/Drip Cover E F N P G H L M 0 106 284 359 437 90 302 214 455 180 0 154 361 402 514 132 396 237 549 210 0 164 396 436 549 132 428 239 581 250 0 229 774 792 941 180 809 318 976 280 0 870 1086 1037 1253 939 1224 1106 1391 320 0 941 1269 1236 1564 1029 1452 1324 1747 360 0 1016 1481 1615 2080 1308 2005 1907 2604 400 0 1261 1976 2099 2814 1684 2779 2522 3617 440 0 1493 2387 3043 3937 2303 3896 3853 5446 S449 0 cf cf – – – – – – Typical Performance Data A 140 Options Selection and Pricing End Shield Round Body C - Face w/Drip Cover General Dimensions H4) QuikMOD only for FS 140-250. H5) H dimension, on QuikMOD or MOD, see Drw H6. H6) QuikMOD Only for FS 140-400. 2014 Low Voltage AC Motors Selection and Pricing Guide 3-11 Part Number Index H1) C-Face and D-Flanges only on motors with ball bearings. H2) Not available for FS 440, 2 pole motors. H3) QuikMOD Only for FS 140-440. Options selection and pricing Winding Protection (MLFB Digit 15) Without Protection PTC Thermistors KTY8-130 Thermistors 3 Embedded, 1 per Phase 6 Embedded, 2 per Phase 2 Embedded B C F A GP100A Std NA NA NA GP100 Std 140-440 140-440 140-440 SD100 Std 140-S440 140-S440 140-S440 SD100 IEEE841 Std. 140-S440 140-S440 140-S440 SD661 Std 180-360 180-360 180-360 RGZ(K)ESDI NA 140-S440 140-S440 140-S440 XP100 NA 140-440 140-440 140-440 XP100 ID1 Std 140-440 140-440 140-440 SD10 MS Std 140-440 140-440 140-440 RGZV(IL)ESD Std 140-440 140-440 140-440 Thermostats Thermocouples Stator RTDs 100 Ohms Thermostats + Stator RTDs Klixon Type, MC 1 x phase DE and N DE, Not Embedded W/Aux. Box, & Terminal Strip P1) 2 x Phase (G + K) G J K L QM (GP & SD) P3) GP100A NA NA NA NA GP100 140-440 360-440 360-440 360-440 SD100 140-S440 360-S440 360-S440 360-S440 SD100 IEEE841 140-S440 360-S440 360-S440 360-S440 SD661 180-360 360 360 360 RGZ(K)ESDI Std 360-S440 360-S440 360-S440 XP100 Std NA 360-440 P2) 360-440 P2) XP100 ID1 NA NA NA NA SD10 MS 140-440 360-440 360-440 360-440 RGZV(IL)ESD 140-440 360-440 360-440 360-440 List Price Without Protection PTC Thermistors PTC Thermistors KTY84-130 Thermistors Thermostats Thermocouples Stator RTDs 100 Ohms Thermostats + Stator RTDs 3 Embedded, 1 per Phase 6 Embedded, 2 per Phase 2 Embedded Klixon Type, MC 1 x Phase DE and N DE Not Embedded W/Aux. Box, & Terminal Strip P1) 2 per Phase A (G + K) B C F G J K 140 L 0 634 1268 981 229 – – – 180 0 634 1268 981 229 – – – 210 0 634 1268 981 229 – – – 250 0 634 1268 981 229 – – – 280 0 634 1268 981 229 – – – 320 0 634 1268 981 306 – – – 360 0 634 1268 981 306 1814 3053 2795 400 0 634 1268 981 459 1814 3053 2795 440 0 634 1268 981 566 1814 3053 2795 S449 0 634 1268 981 661 1887 3175 2868 P1) Auxiliary box opposite to main terminal box. P2) No terminal strip is provided. P3) GP and SD motors only. 3-12 2014 Low Voltage AC Motors Selection and Pricing Guide Introduction Options selection and pricing Ceiling Mount, T. Box LHS Floor Mount, T. Box RHS Standard Mount, T. Box LHS Wall Mount, Shaft Down T. Box LHS Wall Mount, Shaft Down T. Box RHS Wall Mount, Shaft Up T. Box RHS F-3 C-2 F-2 F-1 W-6 W-7 W-5 0 1 2 3 4 5 6 QM (140-400), MOD (440) M3) QM (140-400), MOD (440) M3) QM (140-400), MOD (440) M3) QM M2,M3) QM QM 140-250 140-250 140-250 Std 140-250 140-250 140-250 GP100 NA 140-440 140-440 Std 140-440 140-440 140-440 SD100 NA 140-S440 140-S440 Std 140-S440 140-S440 140-S440 SD100 IEEE841 NA 140-S440 140-S440 Std 140-S440 140-S440 140-S440 SD661 NA 180-360 180-360 Std 180-360 180-360 180-360 RGZ(K)ESDI NA 140-440 NA 140-S440 140-S440 140-S440 NA XP100 NA 140-440 140-440 Std 140-440 140-440 140-440 GP100A NA 140-440 140-440 Std 140-440 140-440 140-440 NA 140-440 140-440 Std 140-440 140-440 140-440 RGZV(IL)ESD NA NA NA Std NA NA NA Ceiling Mount, T. Box RHS Wall Mount, Shaft Right T. Box RHS Wall Mount, Shaft Left T. Box LHS Wall Mount, Shaft Right T. Box LHS Wall Mount, Shaft Left T. Box RHS W-8 C-1 W-1 W-2 W-3 W-4 7 8 9 +R1A 9 +R2A 9 +R3A 9 +R4A QM (140-400), MOD (440) M3) QM M2), M3) QM M3) QM QM QM M3) 140-250 140-250 140-250 140-250 140-250 140-250 140-440 140-440 140-440 140-440 140-440 140-440 SD100 140-S440 140-S440 140-S440 140-S440 140-S440 140-S440 SD100 IEEE841 140-S440 140-S440 140-S440 140-S440 140-S440 140-S440 SD661 180-360 180-360 180-360 180-360 180-360 180-360 RGZ(K)ESDI 140-S440 NA NA 140-440 140-440 140-440 XP100 140-440 140-440 140-440 140-440 140-440 140-440 XP100 ID1 140-440 140-440 140-440 140-440 140-440 140-440 SD10 MS 140-440 140-440 140-440 140-440 140-440 140-440 NA NA NA NA NA NA RGZV(IL)ESD Special Features Detail GP100 Definite Purpose Motors GP100A Wall Mount, Shaft Up T. Box LHS Hazardous Duty Motors XP100 ID1 SD10 MS Wall Mount, Shaft Up T. Box LHS Ceiling Mount, T. Box RHS Wall Mount, Shaft Up T. Box RHS Wall Mount, Shaft Left T. Box LHS Wall Mount, Shaft Up T. Box LHS Wall Mount, Shaft Left T. Box RHS C-2 F-2 F-1 W-6 W-7 W-5 W-8 C-1 W-1 W-2 W-3 W-4 0 1 2 3 4 5 6 7 8 9 +R1A 9 +R2A 9 +R3A 9 +R4A 140 125 134 284 0 202 288 284 131 284 284 130 130 284 180 125 134 284 0 202 288 284 131 284 284 130 130 284 210 125 134 284 0 202 288 284 131 284 284 130 130 284 250 125 134 284 0 202 288 284 131 284 284 130 130 284 280 – 134 284 0 202 288 284 131 284 284 130 130 284 320 – 134 284 0 202 288 284 131 284 284 130 130 284 360 – 134 284 0 202 288 284 131 284 284 130 130 284 400 – 134 284 0 202 288 284 131 284 284 130 130 284 – 134 284 0 202 288 284 131 284 284 130 130 284 – 134 284 0 202 288 284 131 294 294 130 130 284 2014 Low Voltage AC Motors Selection and Pricing Guide 3-13 Part Number Index M1) T. Box position viewed from the DE. M2) Only available as custom build for XP100 motors. M3) S440 frames only available as custom build. General Dimensions 440 S449 Typical Performance Data F-3 Options Selection and Pricing List Price Wall Wall Wall Floor Ceiling Floor Standard Mount, Mount, Mount, Mount, Mount, Mount, Mount, Shaft Down Shaft Down Shaft Up T. Box top T.Box LHS T. Box RHS T.Box LHS T. Box LHS T. Box RHS T. Box RHS Severe Duty Motors Floor Mount, T. Box Top General Purpose Motors Mounting M1) (MLFB Digit 16) Options selection and pricing Bearing and Lubrication Oil Mist L3) Special Grease L5) Grease Fitting Provisions "Ready" Ball Bearings Roller Bearings L2), L6) In Lieu of Ball Bearings Sealed L65 L68 Mobil 28 Mobilith SHC 100 Pressure Relief L57 L58 L60 L54 L55 MOD MOD QM MOD (280-360) MOD (280-360) GP100A NA NA NA NA NA NA NA GP100 NA NA NA NA NA NA 140-440 SD100 QM 140-S440 140-S440 140-S440 280-440 280-440 280-400 400-S440 SD100 IEEE841 NA NA Std 280-440 400-440 280-400 NA SD661 NA NA Std NA NA NA NA 140-440 140-440 140-440 NA NA 280-440 140-S440 140-S440 2 & 8 pole 280-360 140-S440 2 & 8 pole 280-360 140-S440 140-S440 NA NA 400-S440 140-S440 140-S440 NA NA 400-S440 XP100 140-440 140-440 NA NA 400-440 280-400 140-440 XP100 ID1 140-440 140-440 NA NA NA 280-400 140-440 SD10 MS 140-440 140-440 140-440 280-440 400-440 280-400 140-440 RGZV(IL)ESD 140-440 140-440 140-440 NA NA NA NA RGZ(K)ESDI SD100 SD100 IEEE841 Insulated Bearing Opposite Drive End L1), L6) Both Ends L66 Shaft Ring Brush (Metal) L4) Bearing Thermal Protection Opposite Drive End Opposite Drive End 100 RTDs Both Ends and Terminal Block A51 Hybrid Bearings (Ceramic Ball) Both Ends L6) L67 L69 L70 M42 2 & 8 pole 280-360 QM QM QM GP100A NA NA NA NA NA GP100 NA NA NA NA 140-440 NA SD100 140-S440 2 & 8 pole 280-360 140-S440 2 & 8 pole 280-360 140-S440 140-S440 NA 400-S440 SD100 IEEE841 NA NA 140-S440 140-S440 NA 400-S440 SD661 NA NA 180-210 180-360 NA NA 280-S440 280-S440 NA NA NA 400-S440 RGZ(K)ESDI NA XP100 NA NA NA NA NA NA XP100 ID1 NA NA NA NA NA NA 140-440 140-440 NA NA NA 400-440 NA NA NA NA NA 400-440 SD10 MS RGZV(IL)ESD List Price Special Grease L5) Grease Fitting Ball Roller Bearings L2), L6) Bearings Oil Mist L3) In Lieu of Ball Bearings Insulated Bearing Hybrid Bearings (Ceramic Ball) Shaft Ring Brush (Metal) L4) Bearing Thermal Protection Sealed L1), L6) Opposite Drive End L57 L58 L60 L54 L55 L65 L68 L66 L67 L69 L70 M41 M42 A51 140 485 336 186 – – – 229 765 – 1328 664 321 321 – 180 895 336 186 – – – 229 765 – 1328 664 342 342 – 210 895 336 186 – – – 229 1050 – 2096 1048 375 375 – 250 895 336 186 – – – 458 1315 – 2332 1166 456 456 – 280 895 336 186 380 380 1215 458 2496 1252 3316 1658 489 489 – 320 1230 634 186 380 380 1215 458 2961 1484 4818 2409 551 551 – 360 1230 634 186 650 650 1215 572 3523 1761 6236 3118 743 743 – 400 1640 634 186 1100 1100 1215 916 7645 3823 10850 5425 930 930 3347 440 1640 634 186 1350 1350 – 916 11767 5884 11606 5803 2270 2270 3347 S449 1640 634 186 – – – 1207 11843 8343 12750 6150 1998 1998 3347 Mobil 28 Mobilith Pressure SHC 100 Relief Provisions “Ready” L1) 2 & 8 Pole FS 280-360, FS 440. L2) Except 2 pole, 360+frames. L3) 280-360 frames, only for 2 and 8 Poles. 3-14 2014 Low Voltage AC Motors Selection and Pricing Guide Both Ends Both Ends L6) Opposite Drive End Drive End Opposite Drive End 100 RTDs Both Ends and Terminal Block L4) Aegis SGR®. L5) Provided with single shielded bearings. L6) Ball bearings only. Introduction Options selection and pricing Special Shaft Shaft Grounding Brush NEMA Standard Shaft C4140 Carbon Steel Customer Specific Drive End Customer Specific Opposite Drive End Short Shaft Opposite Drive End Long Shaft Opposite Drive End M57 Y50 Y51 M53 M52 Slinger & O Ring (4, 6, 8 Pole Only) L29 L76 MOD QM NA NA NA NA NA NA NA GP100 NA 140-440 NA NA NA NA 250-440 SD100 400-S440 140-S440 140-S440 140-440 140-440 280-440 140-440 SD100 IEEE841 400-S440 140-S440 140-S440 140-440 140-440 280-440 140-440 180-360 SD661 NA 180-360 180-360 180-360 180-360 NA RGZ(K)ESDI 400-S440 140-S440 140-S440 140-S440 140-S440 280-440 NA XP100 400-440 140-440 140-440 140-440 140-440 NA 140-440 400-440 140-440 140-440 140-440 140-440 NA 140-440 400-440 140-440 140-440 140-440 140-440 280-440 140-440 CF CF NA NA NA NA NA RGZV(IL)ESD Inpro® Seal Brass Seal Opposite Drive End Both Ends L79 L80 L81 L84 QM QM QM MOD Keyless Shaft Coupling Customer Supplied K41 1) H10 MOD NA NA NA NA NA NA GP100 140-440 NA NA NA NA 140-440 SD100 GP100A 140-S440 140-S440 NA 140-S440 140-S440 NA NA Std NA 140-S440 140-S440 SD661 NA NA Std NA 180-360 180-360 RGZ(K)ESDI NA NA NA NA NA 140-S440 XP100 140-440 140-440 140-440 140-400 140-440 140-440 XP100 ID1 140-440 140-440 140-440 140-440 140-440 140-440 SD10 MS 140-440 140-440 140-440 140-440 140-440 140-440 NA NA NA NA NA 140-440 Special Features Detail 140-S440 SD100 IEEE841 RGZV(IL)ESD Definite Purpose Motors Drive End Hazardous Duty Motors XP100 ID1 SD10 MS Severe Duty Motors GP100A General Purpose Motors Shafts and Seals List Price NEMA Standard Shaft C4140 Carbon Steel Drive End Opposite Drive End Short Shaft ODE Long Shaft ODE M57 Y50 Y51 M53 M52 Slinger & O Ring Inpro® Seal (4, 6, 8 Pole Only) Drive End Opposite Drive End L29 L76 L79 L80 Brass Seal Keyless Shaft K41 1) Both Ends L81 L84 140 – CF 132 132 – 88 511 511 1021 133 250 180 – CF 132 132 – 88 511 511 1021 133 250 – CF 132 132 – 88 533 533 1066 133 250 – CF 176 176 – 121 622 622 1244 133 250 280 – CF 272 272 3092 121 644 644 1289 133 250 320 – CF 392 392 3092 164 678 678 1356 133 250 360 – CF 443 443 3092 164 778 778 1556 133 250 400 4667 CF 490 490 3092 213 955 955 1911 133 250 440 5004 CF 558 558 3092 213 1044 1044 2088 133 250 S449 5106 CF 558 558 – 213 1044 1044 2088 – 250 Typical Performance Data 210 250 Options Selection and Pricing Special Shaft Shaft Grounding Brush General Dimensions 2014 Low Voltage AC Motors Selection and Pricing Guide 3-15 Part Number Index S1) Shaft dimensions outside NEMA MG1 Options selection and pricing Frame Rotation Arrow Hardware Bi-directional (No Uni-directional) Clockwise F1) Counter-clockwise F1) Stainless Steel (Inc. T drain SS) K70 K71 K72 L22 L20 QM QM QM MOD (SD: 2 & 4 poles) F2) QM MOD (FS 180 w/feet) F3) QM GP100A 140-250 140-250 140-250 NA Std GP100 140-440 140-440 140-440 140-440 140 SD100 140-S440 140-S440 140-S440 140-S440 140 SD100 IEEE841 140-S440 140-S440 140-S440 280-S440 F4) Std SD661 180-360 180-360 180-360 180-360 F4) Std RGZ(K)ESDI 140-S440 140-S440 140-S440 140-S440 140 XP100 140-440 140-440 140-440 NA 140 XP100 ID1 140-440 140-440 140-440 NA 140 SD10 MS 140-440 140-440 140-440 140-440 140 RGZV(IL)ESD 140-440 140-440 140-440 NA NA Grounding (Frame) Provision (Tapped Hole w/Bolt) L27 GP100A Lifting Eyebolt Drain Plugs Fan T Drain SS Crouse Hinds (UL Approved) Aluminum L45 L46 M09 M10 QM QM MOD MOD Bronze NA NA NA NA NA GP100 140-440 140-440 NA NA 140-440 SD100 140-S440 140-S440 280-S440 140-440 140-440 SD100 IEEE841 140-S440 140-S440 280-S440 NA 140-440 SD661 180-360 180-210 280-360 NA 180-360 RGZ(K)ESDI 140-S440 140-S440 280-S440 NA NA XP100 140-440 NA 280-440 NA NA XP100 ID1 140-440 NA 280-360 Std 440 NA SD10 MS 140-440 140-440 280-440 NA 140-440 RGZV(IL)ESD 140-440 NA NA NA 140-440 NA List Price Lifting Eyebolt Rotation Arrow Hardware Bi-directional Clockwise F1) CCW F1) SS + T Drain SS Grounding Drain Plugs Fan Provision T Drain SS Crouse Hinds Aluminum Bronze K70 K71 K72 L22 L20 L27 L45 L46 M09 M10 140 142 142 142 203 43 142 161 – 145 546 180 142 142 142 203 – 142 161 – 163 546 210 142 142 142 203 – 142 161 – 166 706 250 142 142 142 203 – 164 234 - 197 752 280 142 142 142 203 – 164 234 353 209 941 320 142 142 142 251 – 186 234 353 228 1137 360 142 142 142 308 – 186 307 353 222 1190 400 142 142 142 380 – 186 307 353 273 1325 440 142 142 142 468 – 266 307 353 315 1830 S449 142 142 142 641 – 266 307 353 – – F1) Rotation viewed from the ODE. F2) Only a MOD for 2 & 4 Poles on SD100 and SD841 motors. F3) Only a MOD when Digit 14 <> A on FS 180. 3-16 2014 Low Voltage AC Motors Selection and Pricing Guide F4) Provided with Crouse hinds breather drain. F5) Round frame only. Introduction Options selection and pricing General Purpose Motors Frame (cont’d) Nameplates Derate S.F. Altitude, and/or Ambient Temperature Auxiliary Nameplate Max. 40 Characters Division 2 Nameplate Space Heaters Caution Plate Lubrication Plate M21 Y80 Y82 M22 M23 M24 QM QM QM QM QM GP100A 140-250 140-250 140-250 NA NA NA GP100 140-440 140-440 140-440 NA 140-S440 140-S440 SD100 140-S440 140-S440 140-S440 140-S440 140-S440 140-S440 SD100 IEEE841 140-S440 140-S440 140-S440 140-S440 140-S440 140-S440 180-360 180-360 180-360 180-360 180-360 180-360 140-S440 140-S440 140-S440 140-S440 NA NA XP100 140-440 140-440 140-440 NA 140-440 NA XP100 ID1 140-440 140-440 140-440 NA NA NA SD10 MS 140-440 140-440 140-440 140-440 140-440 140-440 RGZV(IL)ESD 140-440 140-440 140-440 140-440 140-440 140-440 Stainless Steel Eyebolt Drip Cover Lifting Hooks Provisions for Dowel Holes (No Drip Cover) F5) Vertical Jacking Provisions K33 F6) K34 K38 K39 QM QM MOD (140-250) MOD MOD GP100A NA 140-250 NA NA NA NA 140-440 140-440 280-440 280-440 140-S440 140-440 140-440 280-S440 280-S440 140-S440 140-440 140-440 280-S440 280-S440 SD661 180-360 180-360 180-360 280-360 280-360 NA NA NA NA NA 140-440 140-440 140-440 NA 280-440 XP100 XP100 ID1 NA 140-440 NA NA 280-440 SD10 MS 140-440 140-440 NA NA 280-440 RGZV(IL)ESD 140-440 NA NA NA NA Special Features Detail SD100 SD100 IEEE841 Definite Purpose Motors M28 GP100 RGZ(K)ESDI Hazardous Duty Motors SD661 RGZ(K)ESDI Severe Duty Motors Additional Nameplate (Replica of Original) List Price Drip Cover Lifting Hooks F5) Provisions for Dowel Holes (No Drip Cover) Vertical Jacking Replica of Original Derate Auxiliary Division 2 Nameplate Space Heaters Lubrication Plate M21 Y80 Y82 M22 M23 M24 M28 K33 F6) K34 K38 M39 140 164 164 164 322 43 104 161 153 235 328 – 180 164 164 164 322 43 104 161 153 286 349 – 210 164 164 164 322 43 104 161 153 286 368 – Provisions 164 164 164 322 43 104 161 167 388 414 – 164 164 164 322 43 104 161 167 416 435 890 320 164 164 164 322 43 104 161 295 720 483 890 360 164 164 164 322 43 104 161 599 720 530 890 400 164 164 164 322 43 104 161 838 908 614 890 440 164 164 164 322 43 104 161 1550 1001 915 890 S449 164 164 164 322 43 104 161 1550 1001 915 890 Typical Performance Data 250 280 Options Selection and Pricing Stainless Steel Eyebolt Nameplates General Dimensions F4) Provided with Crouse Hinds breather drain. F5) Round frame only. F6) Not applicable when MLFB dg. 14 is N,P.L or M (see pg. 3-11). 2014 Low Voltage AC Motors Selection and Pricing Guide 3-17 Part Number Index F1) Rotation viewed from the ODE. F2) Only a MOD when Digit 14 <> A on FS 180. F3) Only a MOD for 2 & 4 Poles on SD100 and SD841 motors. Options selection and pricing Terminal Box Auxiliary Box Opp. Main Box Side for Main Terminal Box Cast Iron J84 = Entry from DE J85 = Entry from top Entry from NDE PTC Thermostats KTY84 L01 J84 J85 J86 J05 J15 J25 MOD QM QM QM GP100A GP100 Space Heaters J55 MOD MOD NA NA NA NA NA NA NA NA 140-400 140-440 140-440 140-440 280-S440 280-S440 280-S440 280-S440 SD100 Std 140-S440 140-S440 140-S440 280-S440 280-S440 280-S440 280-S440 SD100 IEEE841 Std 140-S440 140-S440 140-S440 280-S440 280-S440 280-S440 280-S440 SD661 Std 180-360 180-360 180-360 280-360 280-360 280-360 280-360 RGZ(K)ESDI Std 140-S440 140-S440 140-S440 280-S440 280-S440 280-S440 280-S440 XP100 Std 140-440 140-440 140-440 NA NA NA NA XP100 ID1 Std 140-440 140-440 140-440 NA NA NA NA SD10 MS Std 140-440 140-440 140-440 280-440 280-440 280-440 280-440 RGZV(IL)ESD NA 140-440 140-440 140-440 280-440 280-440 280-440 280-440 Auxiliary Box to Main Box for B1) PTC J03 Condulet on Same Side of Main Box for Thermostats KTY84 J13 J23 Space Heaters PTC Thermostats KTY84 Space Heaters J53 J00 J10 J20 J50 MOD MOD GP100A NA NA NA NA NA NA NA NA GP100 NA NA NA NA 280-440 280-440 280-440 280-440 SD100 280-S440 280-S440 280-S440 280-S440 280-S440 280-S440 280-S440 280-S440 SD100 IEEE841 280-S440 280-S440 280-S440 280-S440 280-S440 280-S440 280-S440 280-S440 SD661 280-360 280-360 280-360 280-360 280-360 280-360 280-360 280-360 RGZ(K)ESDI NA NA NA NA NA NA NA NA XP100 NA NA NA NA NA NA NA NA XP100 ID1 NA NA NA NA NA NA NA NA SD10 MS 280-440 280-440 280-440 280-440 280-440 280-440 280-440 280-440 RGZV(IL)ESD 280-440 280-440 280-440 280-440 NA NA NA NA List Price Cast iron L01 Main Terminal Box J84 = Entry J85 = Entry from DE from top J84 J85 Entry from NDE J86 Auxiliary Box Opp. Main Box Side for Space ThermoKTY84 Heaters PTC stats J05 J15 J25 J55 PTC J03 Auxiliary Box to Main Box for B1) ThermoSpace stats KTY84 Heaters J13 J23 J53 Condulet on Same Side of Main Box for ThermoSpace PTC stats KTY84 Heaters J00 J10 J20 J50 140 148 134 134 134 – – – – – – – – – – – – 180 154 134 134 134 – – – – – – – – – – – – 210 161 134 134 134 – – – – – – – – – – – – 250 167 134 134 134 – – – – – – – – – – – – 280 180 134 134 134 443 443 443 443 415 415 415 415 235 235 235 235 320 199 134 134 134 443 443 443 443 415 415 415 415 235 235 235 235 360 218 134 134 134 443 443 443 443 415 415 415 415 235 235 235 235 400 251 134 134 134 443 443 443 443 415 415 415 415 235 235 235 235 440 – 134 134 134 443 443 443 443 415 415 415 415 235 235 235 235 S449 – 134 134 134 443 443 443 443 415 415 415 415 235 235 235 235 B1) GP motors: Only for motors with cast iron terminal box. B2) MOD if mounting with T. box on RHS, (MLFB digit 16 = 2, 5, 6, or 8). B3) Limited to three leads. 3-18 2014 Low Voltage AC Motors Selection and Pricing Guide Introduction Options selection and pricing Condulet Opposite to Main Box Side for B1) PTC Thermostats KTY84 J14 J24 J04 Space Heaters PTC (EX) J54 J06 MOD GP100A MOD Thermostats (EX) KTY84 (EX) Space Heaters (EX) J16 J26 J56 MOD NA NA NA NA NA NA NA 280-440 280-440 280-440 280-440 NA NA NA NA SD100 280-440 280-440 280-440 280-440 NA NA NA NA SD100 IEEE841 280-440 280-440 280-440 280-440 NA NA NA NA SD661 280-360 280-360 280-360 280-360 NA NA NA NA RGZ(K)ESDI NA NA NA NA NA NA NA NA XP100 NA NA NA NA 280-440 280-440 280-440 280-440 Severe Duty Motors NA GP100 XP100 ID1 NA NA NA 280-440 280-440 280-440 280-440 280-440 280-440 280-440 280-440 NA NA NA NA RGZV(IL)ESD 280-440 280-440 280-440 280-440 NA NA NA NA Space Heaters Burndy Hydent YA Type Terminal Block Sealed Leads B3) Special Cable Length J52 K80 K83 K89 Y85 QM QM MOD QM Condulet to Main Box for KTY84 J12 J22 Terminals QM, MOD (RHS T. Box) B2) GP100A NA NA NA NA 140-250 NA NA NA GP100 NA NA NA NA 140-440 140-360 140-440 140-440 SD100 140-S440 140-S440 140-S440 140-S440 140-S440 140-360 140-440 140-S440 SD100 IEEE841 140-S440 140-S440 140-S440 140-S440 140-S440 140-360 140-440 140-S440 180-360 180-360 180-360 180-360 180-360 180-360 180-360 180-360 140-S440 140-S440 140-S440 140-S440 140-S440 140-360 140-S440 140-S440 XP100 NA NA NA NA 140-440 NA NA NA XP100 ID1 NA NA NA NA 140-440 NA NA NA SD10 MS 140-440 140-440 140-440 140-440 140-440 140-360 140-440 140-440 RGZV(IL)ESD 140-440 140-440 140-440 140-440 140-440 140-360 140-440 140-440 Condulet Opposite to Main Box Side for B1) 140 PTC Thermostats J04 235 J14 235 Condulet to Main Box for KTY84 Space Heaters PTC (EX) Thermostats (EX) J24 235 J54 235 J06 – J16 – KTY84 (EX) Space Heaters (EX) J26 – J56 – PTC Thermostats KTY84 J02 251 J12 251 J22 251 Terminals Space Burndy Heaters Hydent J52 251 K80 171 Terminal Block Sealed Leads Special Cable Length K83 228 K89 150 Y85 228 235 235 235 235 – – – – 251 251 251 251 171 228 150 228 235 235 235 235 – – – – 251 251 251 251 171 228 150 228 250 235 235 235 235 – – – – 251 251 251 251 171 342 150 228 280 235 235 235 235 560 560 560 560 251 251 251 251 171 342 150 228 320 235 235 235 235 560 560 560 560 251 251 251 251 171 518 150 228 360 235 235 235 235 560 560 560 560 251 251 251 251 171 518 150 304 400 235 235 235 235 560 560 560 560 251 251 251 251 171 – 200 304 440 235 235 235 235 560 560 560 560 251 251 251 251 171 – 200 304 S449 – – – – – – – – 251 251 251 251 171 – 200 304 Typical Performance Data 180 210 Options Selection and Pricing List Price Special Features Detail SD661 RGZ(K)ESDI Definite Purpose Motors J02 Thermostats Hazardous Duty Motors NA SD10 MS PTC General Purpose Motors Terminal Box (cont’d) General Dimensions 2014 Low Voltage AC Motors Selection and Pricing Guide 3-19 Part Number Index B1) GP motors: Only for motors with cast iron terminal box. B2) MOD if mounting with T. box on RHS, (MLFB digit 16 = 2, 5, 6, or 8). B3) Limited to three leads. Options selection and pricing Windings Insulation Class H W1) Vacuum Pressure Impregnation (VPI) Moisture/Powerhouse (Extra Dip & Bake) Fungus Protection Tropicalization Moisture (Extra Dip & Bake, Fungus Spray) C00 C01 C04 C07 C08 QM GP100A GP100 NA NA NA NA NA 140-440 140-440 140-440 140-440 140-440 SD100 140-S440 140-S440 140-S440 140-S440 140-S440 SD100 IEEE841 140-S440 140-S440 140-S440 140-S440 140-S440 SD661 180-360 180-360 180-360 180-360 180-360 RGZ(K)ESDI 140-S440 140-S440 140-S440 140-S440 140-S440 XP100 140-440 140-440 std NA NA XP100 ID1 140-440 140-440 std NA NA SD10 MS 140-440 140-440 140-440 140-440 140-440 RGZV(IL)ESD 140-440 140-440 140-440 140-440 NA Space Heaters Space Heaters EX 1 x 115V Single Phase W2) 2 x 230V Single Phase 1 x 115V Single Phase W2), Division 2 A40 A41 A42 A44 QM QM QM QM GP100A NA NA NA NA NA NA GP100 NA NA NA NA NA NA SD100 140-S440 140-S440 140-S440 140-S440 NA NA SD100 IEEE841 140-S440 140-S440 140-S440 140-S440 NA NA SD661 180-360 180-360 NA NA NA NA RGZ(K)ESDI NA NA NA NA NA NA XP100 NA NA NA NA 140-440 140-440 XP100 ID1 2 x 230V Single Phase, Division 2 1 x 115V Single Phase W2) - EX 2 x 230V Single Phase - Ex A43 A45 NA NA NA NA 140-440 140-440 SD10 MS 140-440 140-440 140-440 140-440 NA NA RGZV(IL)ESD 140-440 140-440 140-440 140-440 NA NA List Price Insulation Class H W1) Space Heaters VPI Moisture Powerhouse Fungus Protection Tropicalization Moisture 1 x 115V Single Phase W2) Space Heaters, Div 2 Space Heaters, EX 2 x 230V Single Phase 1 x 115V, 1 PH, Division 2 2 x 230V 1 PH, Division 2 1 x 115V, 1 PH W2) - EX 2 x 230V 1 PH, - EX A45 C00 C01 C04 C07 C08 A40 A41 A42 A44 A43 140 122 1670 160 212 214 352 352 455 455 409 409 180 122 1670 160 212 214 352 352 455 455 409 409 210 122 1670 160 212 214 352 352 455 455 409 409 250 157 1670 208 310 277 352 352 455 455 409 409 280 261 2147 345 310 459 528 528 679 679 611 611 320 343 2147 447 310 593 528 528 679 679 611 611 360 438 2714 567 537 746 528 528 816 816 734 734 400 634 3430 798 537 1036 612 612 997 997 897 897 440 904 3728 1877 537 1406 612 612 1181 1181 1062 1062 S449 2387 5463 1877 537 2319 699 699 1259 1259 – – W1) Lead cable and thermal protectors leads are insulation class F. W2) 2x Space heaters for FS 400 and above. 3-20 2014 Low Voltage AC Motors Selection and Pricing Guide Introduction Options selection and pricing VSD operation Special Paint Encoder HS35R VSD - Larger O5) Cooling Fan 2 Part Epoxy 3 Part Epoxy G05 M05 N01 N02 GP100A NA NA NA GP100 NA NA 140-440 SD100 140-S440 404-447 140-S440 SD100 IEEE841 140-S440 404-447 140-S440 NA NA 140-S440 RGZ(K)ESDI Prime Only Special Color in Ral... N03 N04 Y60 NA 140-250 NA 140-250 140-440 140-440 NA 140-440 140-S440 140-S440 140-S440 140-S440 140-S440 140-S440 140-S440 140-S440 180-360 180-360 180-360 180-360 180-360 NA 140-S440 140-S440 140-S440 140-S440 140-S440 140-S440 NA 364-445 140-S440 140-S440 140-S440 140-S440 NA NA 140-440 140-440 140-440 140-440 140-440 SD10 MS NA NA 140-S440 140-S440 140-S440 140-S440 140-S440 RGZV(IL)ESD NA NA 140-440 140-440 140-440 140-440 140-440 Balance O2) Vibration Detectors Extra Precision M69 M70 A66 MOD MOD GP100A Packaging Provision for Vibration Sensors (PMC/Beta) Sea Freight Siemens Standard A67 B09 B10 QM O4) MOD Special NA NA NA NA 140-250 140-250 GP100 140-440 140-440 NA NA 140-440 140-440 SD100 140-S440 140-S440 280-S440 280-S440 140-S440 140-S440 Std 140-S440 280-S440 280-S440 140-S440 140-S440 SD100 IEEE841 SD661 180-360 280-360 280-360 180-360 180-360 140-S440 140-S440 280-S440 280-S440 140-S440 140-S440 XP100 140-S440 140-S440 NA NA 140-440 140-440 XP100 ID1 140-440 140-440 NA NA 140-440 140-440 140-S440 140-S440 280-440 NA 140-440 140-440 140-440 O3) 140-440 O3) NA 280-440 140-440 140-440 SD10 MS RGZV(IL)ESD Special Features Detail Std RGZ(K)ESDI Definite Purpose Motors Precision Robert Shaw Malfunction Model 366 - D8 120VAC Hazardous Duty Motors XP100 XP100 ID1 Severe Duty Motors SD661 Standard Paint 2 Part Epoxy (Ameron system) Standard Paint O1) Special Paint Encoder VSD - Larger O5) HS35R Cooling Fan 2 Part Epoxy 3 Part Epoxy 2 Part Epoxy (Ameron Standard system) Prime Only Special Color in Ral... Balance O1) Extra Precision Precision Vibration Detectors Packaging Robert Shaw Model 366 D8 120VAC Provision Only (PMC/Beta) Siemens Export Packing Special M05 N01 N02 N04 N03 Y60 M69 M70 A66 A67 B09 B10 140 1750 – 2744 2761 5655 558 554 190 312 – – 98 CF 180 1750 – 2744 2761 5655 558 554 190 312 – – 125 CF 210 1750 – 2744 2761 5655 558 554 190 330 – – 125 CF 250 1750 – 2744 2761 5655 558 554 218 330 – – 125 CF 280 1750 – 2744 2761 5655 563 557 218 376 4216 3778 230 CF 320 1750 – 2744 2761 5655 563 557 248 376 4216 3778 290 CF 360 1750 320 2744 2761 5655 563 557 248 506 4216 3778 360 CF 400 1750 320 2744 2761 5655 563 557 313 506 5170 4574 740 CF 440 1750 360 2744 2761 5655 563 557 313 651 5170 4574 1010 CF S449 1750 360 2744 2761 5655 563 557 610 683 5170 4574 1010 CF Typical Performance Data G05 Options Selection and Pricing List Price VSD operation General Purpose Motors Paint and Others General Dimensions O4) Not applicable for RGZ motors. O5) 4 pole only. 2014 Low Voltage AC Motors Selection and Pricing Guide 3-21 Part Number Index O1) Special color and paint system required a combined of codes. O2) Refer to tables in page 3-5. O3) Only for RGZVESD Options selection and pricing Software Outline Drawings Datasheet Documentation in Spanish Certificate of Compliance Standard Dimension Sheet Non-Standard with Catalog Options Non-Standard Outside Catalog Options Typ. Data Std. Performance Data for 460V or 575V 60Hz D05 F00 F42 F43 F44 F49 QM QM QM QM QM QM QM 140-250 140-250 140-250 140-250 140-250 140-250 140-250 GP100A Customer Specific F50 GP100 140-440 140-440 140-440 140-440 140-440 140-440 140-440 SD100 140-S440 140-S440 140-S440 140-S440 140-S440 140-S440 140-S440 SD100 IEEE841 140-S440 140-S440 140-S440 140-S440 140-S440 140-S440 140-S440 SD661 180-360 180-360 180-360 180-360 180-360 180-360 180-360 RGZ(K)ESDI 140-S440 140-S440 140-S440 140-S440 140-S440 140-S440 140-S440 XP100 140-440 140-440 140-440 140-440 140-440 140-440 140-440 XP100 ID1 140-440 140-440 140-440 140-440 140-440 140-440 140-440 SD10 MS 140-440 140-440 140-440 140-440 140-440 140-440 140-440 RGZV(IL)ESD 140-440 140-440 140-440 140-440 140-440 140-440 140-440 Performance Curves Instruction and Operation Manual Wiring Diagram Renewal Parts Standard 460V or 575V 60Hz Stall Times 460V or 575V 60Hz Special Calculated Data F03 F40 F07 F45 F46 QM QM QM QM QM QM 140-250 140-250 140-250 140-250 140-250 140-250 GP100A IOM F47 GP100 140-440 140-440 140-440 140-440 140-440 140-440 SD100 140-S440 140-S440 140-S440 140-S440 140-S440 140-S440 SD100 IEEE841 140-S440 140-S440 140-S440 140-S440 140-S440 140-S440 SD661 180-360 180-360 180-360 180-360 180-360 180-360 RGZ(K)ESDI 140-S440 140-S440 140-S440 140-S440 140-S440 140-S440 XP100 140-440 140-440 140-440 140-440 140-440 140-440 XP100 ID1 140-440 140-440 140-440 140-440 140-440 140-440 SD10 MS 140-440 140-440 140-440 140-440 140-440 140-440 RGZV(IL)ESD 140-S440 140-S440 140-S440 140-S440 140-S440 140-S440 List Price Documentation in Spanish Certificate of Compliance Outline Drawings NonStandard with Catalog Options F43 Datasheets Wiring Diagram Performance Curves Instruction Operation Renewal Manual Parts D05 F00 Standard with Certified Block F42 F45 F46 F47 140 0 300 45 523 45 261 523 747 45 1195 45 45 45 180 0 300 45 523 45 261 523 747 45 1195 45 45 45 210 0 300 45 523 45 261 523 747 45 1195 45 45 45 250 0 300 45 523 45 261 523 747 45 1195 45 45 45 280 0 300 45 523 45 261 523 747 45 1195 45 45 45 320 0 300 45 523 45 261 523 747 45 1195 45 45 45 360 0 300 45 523 45 261 523 747 45 1195 45 45 45 400 0 300 45 523 45 261 523 747 45 1195 45 45 45 440 0 300 45 523 45 261 523 747 45 1195 45 45 45 S449 0 300 45 523 45 261 523 747 45 1195 45 45 45 3-22 PerforConduit Box mance Dimension Data Sheets Sheet F44 F49 2014 Low Voltage AC Motors Selection and Pricing Guide Customer Specific Data Sheets F50 Standard 460V or 575V 60 Hz F03 Stall Times 460 or 575 60 Hz F40 Special Calculated Data F07 Introduction Options selection and pricing Routine Test T1) Test Report Test Report - Witnessed Electrical Duplicate Test + Vibration Report Test + Vibration Report -Witnessed F10 F12 F36 F20 F22 QM MOD MOD QM MOD 140-250 140-250 140-250 140-250 140-250 140-440 140-440 140-440 140-440 140-440 SD100 140-S440 140-S440 140-S440 140-S440 140-S440 SD100 IEEE841 NA NA 140-S440 140-S440 140-S440 SD661 NA NA 180-360 180-360 180-360 140-S440 140-S440 140-S440 140-S440 140-S440 RGZ(K)ESDI XP100 140-440 140-440 140-440 140-440 140-440 XP100 ID1 140-440 140-440 140-440 140-440 140-440 140-440 140-440 140-440 140-440 140-440 RGZV(IL)ESD 140-440 140-440 140-440 140-440 140-440 Complete Test Calibration Hazardous Duty Motors SD10 MS Severe Duty Motors GP100A GP100 Noise Test Test Report - Witnessed Electrical Duplicate Calibration Test Test Report F15 F17 F37 F27 F30 Test Report - Witnessed F32 MOD MOD MOD MOD MOD MOD GP100A 140-250 140-250 140-250 140-250 140-250 140-250 GP100 140-440 140-440 140-440 140-440 140-440 140-440 SD100 140-S440 140-S440 140-S440 140-S440 140-S440 140-S440 SD100 IEEE841 140-S440 140-S440 140-S440 140-S440 140-S440 140-S440 SD661 180-360 180-360 180-360 180-360 180-360 180-360 RGZ(K)ESDI 140-S440 140-S440 140-S440 140-S440 140-S440 140-S440 140-440 140-440 140-440 140-440 140-440 140-440 140-440 140-440 140-440 140-440 140-440 140-440 SD10 MS 140-440 140-440 140-440 140-440 140-440 140-440 RGZV(IL)ESD 140-440 140-440 140-440 140-440 140-440 140-440 Special Features Detail XP100 XP100 ID1 Definite Purpose Motors Test Report List Price Routine Test T1) Complete Test Calibration General Purpose Motors Test Noise Test Electrical Duplicate F36 Test + Vibration Report F20 140 300 1628 300 600 3256 6749 10123 455 5062 4144 6512 180 300 1628 300 600 3256 6749 10123 455 5062 4144 6512 210 300 1628 300 600 3256 6749 10123 455 5062 4144 6512 250 300 1628 300 600 3256 6749 10123 455 5062 4144 6512 280 300 1643 300 600 3286 6812 10217 455 5109 4183 6573 320 300 1972 300 600 3286 7917 11890 455 5938 4183 7768 360 300 2360 300 600 3286 9680 14519 455 7260 5378 7768 400 300 2569 300 600 3286 11054 16581 455 8290 5378 7768 440 300 2778 300 600 3286 12010 18015 455 9007 5378 7768 S449 300 3672 300 600 3286 13596 20394 455 10197 5463 7891 Test Report F15 Test Report Witnessed F17 Electrical Duplicate F37 Calibration Test F27 Test Report F30 Test Report Witnessed F32 Typical Performance Data Test Report Witnessed F12 Options Selection and Pricing Test Report F10 Test + Vibration Report Witnessed F22 General Dimensions 2014 Low Voltage AC Motors Selection and Pricing Guide 3-23 Part Number Index T1) For SD100 IEEE841 only Routine Test + Vibration. T2) Refer to list of test included in page 3-8. Introduction Typical performance data 95.4 95.8 95.0 95.4 94.5 95.0 94.1 94.5 93.6 94.1 93.0 93.6 92.4 93.0 91.7 92.4 91.0 91.7 90.2 91.0 89.5 90.2 88.5 89.5 87.5 88.5 86.5 87.5 85.5 86.5 84.0 85.5 82.5 84.0 81.5 82.5 80.0 81.5 78.5 80.0 77.0 78.5 75.5 77.0 74.0 75.5 72.0 74.0 70.0 • HP = Torque (Lb. – Ft) x RPM 5250 • WK2 (Inertia - Lb. Ft.2) at Motor Shaft = (Load RPM ÷ Mtr. F.L. RPM)2 x Load WK2 • Torque (Newton - meters): Nm x .7376 = Lb. - Ft. kW x 1.341 = HP • Power (Kilowatts): (HP ÷ 1.341 = kW) (HP x .746 = kW) • Temperature: ºC = 5/9 (°F - 32)°F = (9/5 x °C) + 32 • Typical Performance Data Notes: To find amperes at various voltages: • 575 V Data = 460 V Amperes x .80 • 230 V Data = 460 V Amperes x 2.0 • 200 V Data = 460 V Amperes x 2.3 (Amperes = Full Load, Locked Rotor and No Load Values - from data pages) All other data (kVA Code, Efficiencies, Power Factors, Torques and Stall Times) remain same as 460 V Data (winding connections can change - rarely - with voltage designs). Options Selection and Pricing 96.2 • Torque (Lb. – Ft) = HPx520 RPM Special Features Detail 95.8 • Inertia (Kilogram - meter2): kgm2 x 23.73 = Lb. Ft.2 (Lb. Ft.2 ÷ 23.73 = kgm2) (Lb. Ft.2 x .042 = kgm2) GD2 (kgfm2) x 5.933 = Lb. Ft2 Definite Purpose Motors 96.5 • HP x 0.746 = kW kW x 1.341 = HP Hazardous Duty Motors Then Minimum F.L. Efficiency is: Severe Duty Motors When NEMA Nominal F.L. Efficiency is General Purpose Motors Technical notes Typical Performance Data General Dimensions 4-1 Part Number Index 2014 Low Voltage AC Motors Selection and Pricing Guide Typical performance data SIMOTICS General purpose – 460V 60HZ GP100A / GP100 Current (A) Nominal Efficiency (%) NEMA Premium® Aluminum rotor Power Factor Locked Rotor Stall Time Torque No Load Full Load 460V Locked Rotor kVA/ hp Code 1/2 Load -%- 3/4 Load -%- Full Load -%- Guar. Min. -%- 1/2 Load 3/4 Load Full Load Full Load -lb-ft Locked Rotor -%- Break Down -%- Hot - sec - Cold - sec- HP Frame FL RPM 1 143T 3520 0.7 1.4 12 K 79.3 82.1 82.5 80.0 65.2 77.4 81.1 1.5 175 380 12 16 1 143T 1755 0.8 1.4 13 L 83.4 85.4 85.5 82.5 58.4 71.5 78.2 3.0 295 380 18 26 1 145T 1165 1 1.6 11 K 80.2 82.5 82.5 80.0 50.2 63.3 70.9 4.5 260 350 18 31 1 182T 870 1.5 2.1 9 J 77.0 80.0 81.5 80.0 36.0 47.0 56.0 6.0 160 280 50 68 1.5 143T 3525 1.1 2 19 L 80.0 83.2 84.0 81.5 64.2 77.0 83.6 2.2 270 450 14 19 1.5 145T 1740 1.1 2.1 19 L 85.8 87.0 86.5 84.0 58.5 71.8 77.3 4.5 330 420 15 21 1.5 182T 1160 1.4 2.4 15 J 85.3 87.6 87.5 85.5 48.4 58.4 66.9 6.8 205 330 34 46 1.5 184T 865 2.3 3 17 L 78.5 82 82.5 81.5 35.0 47.0 56.0 9.0 160 280 43 63 2 145T 3515 1.2 2.5 23 L 84.0 85.7 85.5 82.5 69.0 81.3 87.6 2.9 250 420 13 18 2 145T 1740 1.5 2.8 24 L 86.0 87.2 86.5 84.0 57.8 70.8 77.3 6.0 320 390 14 22 2 184T 1160 1.9 3.2 20 J 87.5 88.7 88.5 86.5 46.5 58.8 66.1 9.1 240 310 23 32 2 213T 870 2 3.3 16 H 84.0 84.5 84.0 82.5 51.0 63.0 67.0 12.0 170 290 22 38 3 182T 3520 1.7 3.8 30 J 84.17 86.3 86.5 84.0 69.5 79.8 85.5 4.4 185 380 20 30 3 182T 1760 2.1 4 33 K 87.8 89.4 89.5 87.5 59.5 71.7 78.5 9.0 235 360 17 29 3 213T 1175 2.5 4.3 32 K 87.8 89.3 89.5 87.5 52.1 65.4 73.0 13.4 265 470 23 35 3 215T 870 3 4.8 25 H 85.5 86.5 85.5 84.0 45.0 59.0 68.0 18.0 175 290 19 31 5 184T 3505 2 6 46 H 88.2 89.1 88.5 86.5 78.1 85.9 88.2 7.5 170 420 15 29 5 184T 1755 3 6.5 46 K 89.2 90 89.5 87.5 63.6 75.1 80.5 15.0 220 350 14 29 5 215T 1165 4.5 6.7 46 H 89.5 90.1 89.5 87.5 59.4 71.4 78.1 26.5 220 380 14 21 5 254T 875 5.5 8.5 33 G 85.5 87 86.5 85.5 43.0 54.0 61.0 30.0 155 210 65 115 7.5 213T 3520 3 8.8 63 H 89.6 90.1 89.5 87.5 78.5 86.8 89.2 11.0 180 490 17 30 7.5 213T 1765 5 9.7 63 J 90.73 91.7 91.7 90.2 60.5 72.3 78.9 22.0 270 450 25 42 7.5 254T 1175 5 10 63 H 91.1 91.5 91.0 89.5 58.4 70.2 77.2 33.0 165 260 26 45 7.5 256T 875 7.9 13 50 G 87.0 88 87.5 85.5 44.0 55.0 62.0 45.0 165 200 50 100 10 215T 3515 3.5 11.5 81 H 91.0 91.1 90.2 88.5 81.5 88.8 90.3 15.0 180 440 14 28 10 215T 1755 6.1 12.5 81 H 91.7 92.2 91.7 90.2 63.8 76.2 81.7 30.0 270 410 20 36 10 256T 1175 6.3 13.5 81 H 91.4 91.6 91.0 89.5 61.0 71.6 76.2 45.0 165 250 18 38 10 284T 885 11 17 81 H 88.2 89.8 90.2 89.5 42.0 53.0 61.0 59.0 160 240 15 30 15 254T 3530 5.1 17.5 116 G 90.7 91.3 91.0 89.5 80.6 87.4 88.2 22.0 210 260 24 48 15 254T 1770 11.8 19 116 G 92.3 92.8 92.4 91.0 64.5 74.7 80.0 44.0 185 235 21 33 15 284T 1180 11 21 116 G 90.9 91.8 91.7 91.0 53.0 66.0 73.0 67.0 150 240 22 48 15 286T 885 14 23 116 G 89.4 90.6 91.0 90.2 47.0 59.0 66.0 89.0 160 240 18 35 20 256T 3515 5.2 22.5 145 G 92.1 91.6 91.0 89.5 86.2 91.3 91.5 30.0 185 230 20 45 20 256T 1770 10.48 25 145 H 93.1 93.4 93.0 91.7 65.3 75.9 80.5 60.0 185 240 15 33 20 286T 1180 13 27 145 G 91.2 92 91.7 91.0 57.0 69.0 76.0 89.0 150 240 20 45 20 324T 885 18 32 145 G 90.0 90.8 91.0 90.2 46.0 58.0 65.0 119.0 140 200 15 35 25 284TS 3525 7 29 183 G 91.4 92.2 91.7 91.0 81.0 86.0 88.0 37.0 160 250 16 30 25 284T 1775 11 30 183 G 93.5 94.0 93.6 93.0 71.0 80.0 84.0 74.0 180 250 24 44 25 324T 1185 14 33 183 G 92.7 93.2 93 92.4 62.0 72.0 76.0 111.0 170 240 28 54 25 326T 885 22 40 183 G 90.4 91.2 91.0 90.2 48.0 59.0 65.0 149.0 150 200 22 40 30 286TS 3530 8.5 34 218 G 91.4 92.2 91.7 91.0 84.0 89.0 90.0 45.0 160 250 16 30 30 286T 1775 12 35 218 G 93.9 94.1 93.6 93.0 73.0 82.0 85.0 89.0 180 250 24 44 30 326T 1185 15 39 218 G 93.1 93.5 93.0 92.4 61.0 73.0 77.0 133.0 170 220 26 52 30 364T 885 26 47 218 G 90.6 92 91.7 91.0 49.0 61.0 65.0 178.0 150 200 22 40 Typical performance data, not guaranteed NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. 4-2 2014 Low Voltage AC Motors Selection and Pricing Guide Current (A) FL RPM No Load Full Load 460V Nominal Efficiency (%) Locked Rotor kVA/ hp Code 1/2 Load -%- 3/4 Load -%- Full Load -%- Guar. Min. -%- NEMA Premium® Aluminum rotor Power Factor 1/2 Load 3/4 Load Locked Rotor Stall Time Torque Full Load Full Load -lb-ft Locked Rotor -%- Break Down -%- Hot - sec - Cold - sec- Frame 40 324TS 3535 12 45 290 G 94.0 94.1 93.6 93.0 80 87 89 60 150 250 22 45 40 324T 1780 15 46 290 G 94.3 94.1 94.1 93.6 75 83 86 118 180 230 22 45 55 40 364T 1185 19 49 290 G 94.4 94.6 94.1 93.6 68 77 81 177 190 220 29 40 365T 885 36 63 290 G 90.7 92.0 91.7 N/A 49 60 65 237 150 200 25 40 50 326TS 3535 15 55 363 G 93.8 94.1 93.6 93 82 89 91 74 150 250 18 37 45 50 326T 1780 20 58 363 G 94.8 95.0 94.5 94.1 72 81 85 148 170 230 22 50 365T 1185 24 62 363 G 94.0 94.3 94.1 N/A 67 76 80 222 190 220 29 55 60 364TS 3565 19 68 435 G 93.8 94.1 93.6 93.0 80 86 88 89 160 250 16 28 364T 1780 21 68 435 G 95.2 95.4 95.0 94.5 77 85 87 177 180 240 26 38 404T 1185 28 74 435 G 94.2 94.7 94.5 94.1 65 76 80 266 180 220 25 50 75 365TS 3565 22 86 543 G 93.7 94.3 94.1 93.6 81 86 88 111 160 260 16 27 75 365T 1780 25 85 543 G 95.6 95.8 95.4 95.0 78 85 87 221 180 240 25 35 75 405T 1185 34 93 543 G 94.7 94.9 94.5 94.1 68 77 80 332 180 220 33 45 100 405T 1780 30 113 725 G 95.8 96.0 95.4 95.0 80 86 87 295 180 200 25 35 444T 1185 39 117 725 G 95.1 95.3 95.0 94.5 73 81 84 443 160 200 30 35 444TS 3575 32 138 908 G 94.5 95.1 95.0 94.5 84 88 89 184 120 200 18 23 125 444T 1785 45 143 908 G 95.4 95.6 95.4 95.0 78 84 86 368 160 200 20 25 125 445T 1185 48 144 908 G 95.1 95.4 95.0 94.5 74 82 85 554 160 200 25 35 150 445TS 3575 37 164 1085 G 94.2 95.0 95.0 94.5 84 89 90 220 120 200 15 18 150 445T 1785 52 170 1085 G 95.7 96.0 95.8 95.4 78 84 86 441 150 200 20 30 150 447T 1190 59 172 1085 G 95.6 96.0 95.8 95.4 73 82 85 662 140 200 28 43 200 447TS 3575 44 216 1450 G 95.3 95.6 95.4 95.0 83 90 91 294 120 200 16 20 447T 1785 73 228 1450 G 96.2 96.5 96.2 95.8 75 83 85 588 160 200 18 25 449T 1190 73 227 1450 G 95.6 96.2 95.8 95.4 75 83 86 883 125 200 25 32 Special Features Detail 200 200 Definite Purpose Motors 100 125 Hazardous Duty Motors 60 60 Severe Duty Motors HP General Purpose Motors SIMOTICS General purpose – 460V 60HZ GP100A / GP100 Introduction Typical performance data Options Selection and Pricing Typical Performance Data General Dimensions 2014 Low Voltage AC Motors Selection and Pricing Guide 4-3 Part Number Index Typical performance data, not guaranteed Typical performance data SIMOTICS General purpose – 460V 60HZ GP100A / GP100 Current (A) Nominal Efficiency (%) NEMA Premium® Copper rotor Power Factor Locked Rotor Stall Time Torque No Load Full Load 460V Locked Rotor kVA/ hp Code 1/2 Load -%- 3/4 Load -%- Full Load%- Guar. Min. -%- 1/2 Load 3/4 Load Full Load Full Load -lb-ft Locked Rotor -%- Break Down -%- Hot - sec - Cold - sec- HP Frame FL RPM 1 143T 3550 0.7 1.4 12 L 79.3 82.1 82.5 81.5 65.00 77.00 81.10 1.5 175 380 12 16 1 143T 1775 0.9 1.5 15 N 83.0 86.0 86.5 85.5 53.00 65.00 74.00 3.0 290 480 16 20 1 145T 1175 1.0 1.6 12 L 80.5 83.5 84.0 82.5 49.00 61.00 70.00 4.5 210 380 19 27 1.5 143T 3550 0.8 1.9 20 M 83.0 86.0 87.5 86.5 69.00 79.00 84.00 2.2 230 480 19 26 1.5 145T 1770 1.2 2.1 20 M 85.0 87.0 87.5 86.5 57.00 69.00 77.00 4.4 250 460 14 19 1.5 182T 1180 1.4 2.4 17 L 84.5 87.0 87.5 86.5 49.00 61.00 67.00 6.7 165 410 33 50 2 145T 3550 1.2 2.6 25 L 85.0 88.0 88.5 87.5 66.00 77.00 83.00 3.0 250 490 18 26 2 145T 1765 1.6 2.8 25 L 86.0 87.5 87.5 86.5 55.00 69.00 78.00 6.0 240 440 15 21 2 184T 1180 1.8 3.0 22 K 87.5 89.0 88.5 87.5 47.00 59.00 67.00 8.9 190 400 30 41 3 182T 3565 1.5 3.8 32 K 85.5 89.0 89.5 88.5 69.00 79.00 83.00 4.4 220 400 36 51 3 182T 1770 1.8 4.0 33 K 88.5 90.0 90.2 89.5 63.00 73.00 79.00 8.9 230 390 31 45 3 213T 1180 2.3 4.3 32 K 88.5 90.0 90.2 89.5 55.00 67.00 74.00 13.0 170 360 27 35 5 184T 3550 2.3 6.2 46 J 89.0 90.2 90.2 89.5 70.00 80.00 84.00 7.4 200 440 21 38 5 184T 1770 3.2 6.7 46 J 89.5 90.0 90.2 89.5 62.00 72.00 77.00 15.0 225 340 19 35 5 215T 1180 3.5 7.0 46 J 89.0 90.5 90.2 89.5 56.00 68.00 76.00 22.0 190 350 21 31 7.5 213T 3560 2.6 8.5 63 H 91.0 92.0 91.7 91.0 78.00 86.00 88.00 11.0 170 340 19 31 7.5 213T 1775 4.0 9.5 63 H 92.0 92.5 92.4 91.7 65.00 76.00 81.00 22.0 250 340 34 49 7.5 254T 1180 5.0 10.5 63 H 91.5 92.5 92.4 91.7 57.00 67.00 76.00 33.0 190 230 66 92 10 215T 3555 3.4 11.5 81 H 92.0 92.3 91.7 91.0 78.00 86.00 89.00 15.0 200 360 13 24 10 215T 1770 5.5 12.5 81 H 92.0 92.5 92.4 91.7 64.00 75.00 81.00 30.0 250 280 25 41 10 256T 1185 6.5 13.5 81 H 92.0 92.5 92.4 91.7 57.00 68.00 72.00 44.0 240 250 45 73 15 254T 3565 5.0 17.0 116 G 91.0 92.0 92.4 91.7 81.00 87.00 89.00 22.0 220 280 45 81 15 254T 1780 7.3 19.0 116 G 92.5 93.5 93.0 92.4 66.00 76.00 79.00 44.0 200 250 25 55 20 256T 3560 5.5 22.5 145 G 92.0 92.5 92.4 91.7 84.00 88.00 88.00 29.0 210 250 34 75 20 256T 1780 9.5 25.0 145 G 93.0 93.5 93.6 93.0 68.00 78.00 80.00 59.0 190 230 28 56 Typical performance data, not guaranteed NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. 4-4 2014 Low Voltage AC Motors Selection and Pricing Guide Introduction Typical performance data Current (A) No Load Nominal Efficiency (%) Full Load Locked 460V Rotor NEMA Premium® Aluminum rotor Power Factor kVA/ hp Code 1/2 Load -%- 3/4 Load -%- Full Load%- Guar. Min. -%- 1/2 Load 3/4 Load Full Load Locked Rotor Stall Time Torque Full Load -lb-ft Locked Rotor -%- Break Down -%- Hot - sec - Cold - sec- 12 K 79.3 82.1 82.5 80.0 65.20 77.40 81.10 1.5 175 380 12 16 1.4 14 L 83.4 85.4 85.5 82.5 58.40 71.50 78.20 3.0 295 380 18 26 1 145T 1165 1.0 1.6 11 K 80.2 82.5 82.5 80.0 50.20 63.30 70.90 4.5 260 350 18 31 1 182T 870 1.5 2.1 9 J 77.0 80.0 81.5 78.5 36.00 47.00 56.00 6.0 160 280 50 68 1.5 143T 3525 1.1 2.0 19 L 80.0 83.2 84.0 81.5 64.20 77.00 83.60 2.2 270 450 14 19 1.5 145T 1740 1.1 2.1 19 L 85.8 87.0 86.5 84.0 58.50 71.80 77.30 4.5 330 420 15 21 1.5 182T 1160 1.4 2.4 16 K 85.3 87.6 87.5 85.5 48.40 58.40 66.90 6.8 205 330 34 46 1.5 184T 865 2.3 3.0 17 H 78.5 82.0 82.5 80.0 35.00 47.00 56.00 9.1 160 280 43 63 2 145T 3515 1.2 2.5 23 L 84.0 85.7 85.5 82.5 69.00 81.30 87.60 2.9 250 420 13 18 2 145T 1740 1.5 2.7 24 L 86.0 87.2 86.5 84.0 57.80 70.80 77.30 6.0 320 390 14 22 2 184T 1160 1.9 3.2 20 J 87.5 88.7 88.5 86.5 46.50 58.80 66.10 9.1 240 310 23 32 2 213T 870 2.0 3.3 16 H 84.0 84.5 84.0 81.5 51.00 63.00 67.00 12.1 170 290 22 38 3 182T 3520 1.7 3.8 30 J 84.2 86.3 86.5 84.0 69.50 79.80 85.50 4.4 185 380 20 30 3 182T 1760 2.1 4.0 33 K 87.8 89.4 89.5 87.5 59.50 71.70 78.50 9.0 235 360 17 29 3 213T 1175 2.5 4.3 32 K 87.8 89.3 89.5 87.5 52.10 65.40 73.00 13.4 265 470 23 35 3 215T 870 3.0 4.8 25 H 85.5 86.5 85.5 82.5 45.00 59.00 68.00 18.1 175 290 19 31 5 184T 3505 2.0 6.0 46 H 88.2 89.1 88.5 86.5 78.10 85.90 88.20 7.5 170 420 15 29 5 184T 1755 3.0 6.4 50 K 89.2 90.0 89.5 87.5 63.60 75.10 80.50 15.0 220 350 14 29 5 215T 1165 4.5 6.7 46 H 89.5 90.1 89.5 87.5 59.40 71.40 78.10 22.5 220 380 14 21 5 254T 875 5.5 8.8 33 F 85.5 87.0 86.5 84.0 43.00 54.00 61.00 30.0 155 210 65 115 7.5 213T 3520 3.0 8.8 63 H 89.6 90.1 89.5 87.5 78.50 86.80 89.20 11.0 180 490 17 30 7.5 213T 1765 5.0 9.7 63 J 90.7 91.7 91.7 90.2 60.50 72.30 78.90 22.0 270 450 25 42 7.5 254T 1175 5.0 10.0 63 H 91.1 91.5 91.0 89.5 58.40 70.20 77.20 33.0 165 260 26 45 7.5 256T 875 7.9 13.0 50 G 87.0 88.0 87.5 85.5 0.44 0.55 0.62 45.0 165 200 50 100 10 215T 3515 3.5 11.5 81 H 91.0 91.1 90.2 88.5 81.50 88.80 90.30 15.0 180 440 14 28 10 215T 1755 6.1 12.5 81 H 91.7 92.2 91.7 90.2 63.80 76.20 81.70 30.0 270 410 20 36 10 256T 1175 6.3 13.5 81 H 91.4 91.6 91.0 89.5 61.00 71.60 76.20 45.0 165 250 18 38 10 284T 875 11.0 17.0 81 H 88.2 89.8 90.2 89.5 42.00 53.00 61.00 59.0 160 240 15 30 15 254T 3530 5.1 17.5 116 G 90.7 91.3 91.0 89.5 80.60 87.40 88.20 22.0 210 260 24 48 15 254T 1770 11.8 19.0 116 G 92.3 92.8 92.4 91.0 64.50 74.70 80.00 44.0 185 235 21 33 15 284T 1180 8.8 17.0 93 G 90.9 91.8 91.7 91.0 53.00 66.00 73.00 67.0 150 240 22 48 15 286T 875 14.0 23.0 116 H 89.4 90.6 91.0 90.2 47.00 59.00 66.00 89.0 160 240 18 35 20 256T 3515 5.2 22.5 145 G 92.1 91.6 91.0 89.5 86.20 91.30 91.50 30.0 185 230 20 45 20 256T 1770 10.5 25.0 145 H 93.1 93.4 93.0 91.7 65.30 75.90 80.50 60.0 185 240 15 33 20 286T 1180 10.5 21.5 116 G 91.2 92.0 91.7 91.0 57.00 69.00 76.00 89.0 150 240 20 45 20 324T 880 18.0 32.0 145 G 90.0 90.8 91.0 90.2 46.00 58.00 65.00 119.0 140 200 15 35 25 284TS 3525 7.0 29.0 183 G 91.4 92.2 91.7 91.0 81.00 86.00 88.00 37.0 160 250 16 30 25 284T 1775 11.0 30.0 183 G 93.5 94.0 93.6 93.0 71.00 80.00 84.00 74.0 180 250 24 44 25 324T 1185 14.0 33.0 183 G 92.7 93.2 93.0 92.4 62.00 72.00 76.00 111.0 170 240 28 54 25 326T 880 22.0 40.0 183 G 90.4 91.2 91.0 90.2 48.00 59.00 65.00 149.0 150 200 22 40 30 286TS 3530 8.5 34.0 218 G 91.4 92.2 91.7 91.0 84.00 89.00 90.00 45.0 160 250 16 30 30 286T 1775 12.0 35.0 227 G 93.9 94.1 93.6 93.0 73.00 82.00 85.00 89.0 180 250 24 44 30 326T 1185 15.0 39.0 218 G 93.1 93.5 93.0 92.4 61.00 73.00 77.00 133.0 170 220 26 52 30 364T 885 18.0 41.0 210 G 90.6 92.0 91.7 91.0 49.00 61.00 65.00 178.0 150 200 22 40 4-5 Part Number Index 2014 Low Voltage AC Motors Selection and Pricing Guide General Dimensions 1.4 0.7 Typical Performance Data 0.7 1760 Options Selection and Pricing 3520 143T Special Features Detail 143T 1 Definite Purpose Motors 1 Hazardous Duty Motors Frame Severe Duty Motors HP FL RPM General Purpose Motors SIMOTICS Severe duty – 460V 60HZ SD100 / SD100 IEEE841 Typical performance data SIMOTICS Severe duty – 460V 60HZ SD100 / SD100 IEEE841 Current (A) No Load Full Load 460V Nominal Efficiency (%) kVA/ Locked hp Rotor Code NEMA Premium® Aluminum rotor Power Factor 1/2 Load -%- 3/4 Load -%- Full Load%- Guar. Min. -%- 1/2 Load 3/4 Load Full Load Locked Rotor Stall Time Torque Full Load -lb-ft Locked Break Rotor Down Hot -%- % - - sec - HP Frame FL RPM Cold - sec- 40 324TS 3535 12.0 45.0 290 G 94.0 94.1 93.6 93.0 80.00 87.00 89.00 60.0 150 250 22 45 40 324T 1780 15.0 46.0 290 G 94.3 94.1 94.1 93.6 75.00 83.00 86.00 118.0 180 230 22 45 40 364T 1185 18.0 49.0 290 G 94.4 94.1 94.1 93.6 70.00 79.00 81.00 177.0 190 220 29 55 40 365T 885 36.0 63.0 290 G 93.0 93.1 91.7 91.0 49.00 60.00 65.00 237.0 150 200 25 40 50 326TS 3535 15.0 55.0 363 G 93.8 94.1 93.6 93.0 82.00 89.00 91.00 74.0 150 250 18 37 50 326T 1780 19.0 58.0 363 G 94.8 95.0 94.5 94.1 74.00 82.00 85.00 148.0 170 230 22 45 50 365T 1185 24.0 62.0 363 G 94.0 94.3 94.1 93.6 67.00 76.00 80.00 222.0 190 220 29 55 50 404T 885 28.0 67.0 363 G 93.0 93.1 92.4 91.7 64.00 73.00 76.00 297.0 140 200 25 40 60 364TS 3565 19.0 68.0 435 G 93.8 94.1 93.6 93.0 80.00 86.00 88.00 89.0 160 250 16 28 60 364T 1780 21.0 68.0 435 G 95.2 95.4 95.0 94.5 77.00 85.00 87.00 177.0 180 240 26 38 60 404T 1185 28.0 74.0 435 G 94.2 94.7 94.5 94.1 65.00 76.00 80.00 266.0 180 220 25 50 60 405T 885 30.0 78.0 435 G 93.0 93.1 92.4 91.7 66.00 75.00 78.00 356.0 140 200 30 35 75 365TS 3565 22.0 86.0 543 G 93.7 94.3 94.1 93.6 81.00 86.00 88.00 111.0 160 260 16 27 75 365T 1780 25.0 85.0 543 G 95.6 95.8 95.4 95.0 78.00 85.00 87.00 221.0 180 240 25 35 75 405T 1185 34.0 93.0 543 G 94.7 94.9 94.5 94.1 68.00 77.00 80.00 332.0 180 220 33 45 75 444T 885 37.0 94.0 543 G 93.5 93.9 93.6 93.0 67.00 76.00 80.00 445.0 135 200 25 32 100 405TS 3570 19.0 108.0 725 G 94.6 94.7 94.1 93.6 90.00 92.00 92.00 147.0 120 200 25 45 100 405T 1780 30.0 113.0 725 G 95.8 96.0 95.4 95.0 80.00 86.00 87.00 295.0 180 200 25 35 100 444T 1185 39.0 117.0 725 G 95.1 95.3 95.0 94.5 73.00 81.00 84.00 443.0 160 200 30 35 100 445T 885 48.0 123.0 725 G 94.2 94.5 94.1 93.6 70.00 78.00 81.00 593.0 130 200 22 30 125 444TS 3575 37.0 140.0 908 G 94.5 95.1 95.0 94.5 84.00 88.00 89.00 184.0 110 200 18 23 125 444T 1785 45.0 143.0 908 G 95.4 95.6 95.4 95.0 78.00 84.00 86.00 368.0 160 200 20 25 125 445T 1185 48.0 144.0 908 G 95.1 95.4 95.0 94.5 74.00 82.00 85.00 554.0 160 200 25 35 125 447T 885 54.0 152.0 908 G 94.6 94.7 94.1 93.6 70.00 79.00 82.00 742.0 130 200 20 30 150 445TS 3575 43.0 162.0 1085 G 94.2 95.0 95.0 94.5 84.00 89.00 90.00 220.0 120 200 15 18 150 445T 1785 52.0 170.0 1085 G 95.7 96.0 95.8 95.4 78.00 84.00 86.00 441.0 150 200 20 30 150 447T 1190 59.0 172.0 1085 G 95.6 96.0 95.8 95.4 73.00 82.00 85.00 662.0 140 200 28 43 150 449T 885 61.0 180.0 1085 G 94.3 94.5 94.1 93.6 72.00 80.00 83.00 890.0 130 200 20 25 200 447TS 3575 59.0 220.0 1450 G 95.3 95.6 95.4 95.0 83.00 90.00 91.00 294.0 120 200 16 20 200 447T 1785 70.0 226.0 1450 G 96.2 96.5 96.2 95.8 76.00 84.00 86.00 588.0 160 200 18 25 200 449T 1190 73.0 227.0 1450 G 95.6 96.2 95.8 95.4 75.00 83.00 86.00 883.0 125 200 25 32 200 S449LS 885 78.0 240.0 1450 G 95.0 95.0 94.5 94.1 71.00 79.00 83.00 1187.0 125 200 15 25 250 449TS 3575 51.0 261.0 1825 G 95.7 96.0 95.8 95.4 89.00 91.00 91.00 368.0 90 200 12 18 250 449T 1785 90.0 278.0 2100 H 96.1 96.3 96.2 95.8 78.00 85.00 87.00 735.0 140 200 18 25 250 449T 1190 86.0 281.0 2050 H 95.7 96.0 95.8 95.4 81.00 86.00 87.00 1104.0 120 200 20 25 250 S449LS 885 109.0 303.0 1825 G 94.5 94.8 94.5 94.1 70.00 78.00 82.00 1483.0 105 200 25 32 300 449TS 3570 60.0 312.0 2200 F 95.6 96.0 95.8 95.4 87.00 90.00 91.00 441.0 80 200 12 13 300 S449LS 1785 114.0 334.0 2400 H 96.1 96.3 96.2 95.8 75.00 83.00 86.00 882.0 140 200 22 30 300 S449LS 1185 119.0 340.0 2200 G 96.0 96.1 95.8 95.4 82.00 85.00 86.00 1329.0 105 200 26 33 350 S449SS 3570 370.0 2550 G 95.8 96.1 95.8 95.4 89.00 91.00 92.00 515.0 80 200 20 26 350 S449LS 1785 115.0 390.0 2550 G 95.8 96.3 96.2 95.8 77.00 84.00 86.00 1029.0 100 200 25 32 400 S449SS 3570 422.0 2900 G 94.6 96.1 95.8 95.4 89.00 92.00 93.00 588.0 80 200 21 26 400 S449LS 1785 130.0 454.0 2900 G 96.0 96.4 96.2 95.8 77.00 84.00 86.00 1176.0 100 200 21 26 68.0 80.0 Typical performance data, not guaranteed NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. 4-6 2014 Low Voltage AC Motors Selection and Pricing Guide Current (A) HP Frame FL RPM No Load Full Load 460V Nominal Efficiency (%) Locked Rotor kVA/ hp Code 1/2 Load -%- 3/4 Load -%- Full Load%- Guar. Min. -%- NEMA Premium® Copper rotor Power Factor 1/2 Load 3/4 Load Full Load Locked Rotor Stall Time Torque Full Load -lb-ft Locked Rotor -%- Break Down -%- Hot - sec- Cold - sec- 143T 3550 0.7 1.4 12 L 79.3 82.1 82.5 81.5 65.00 77.00 81.10 1.5 175 380 12 16 143T 1775 0.9 1.5 15 N 83.0 86.0 86.5 85.5 53.00 65.00 74.00 3.0 290 480 16 20 1 145T 1175 1.0 1.6 12 L 80.5 83.5 84.0 82.5 49.00 61.00 70.00 4.5 210 280 19 27 1.5 143T 3550 0.8 1.9 20 M 83.0 86.0 87.5 86.5 69.00 79.00 84.00 2.2 230 480 19 26 1.5 145T 1770 1.2 2.1 20 M 85.0 87.0 87.5 86.5 57.00 69.00 77.00 4.4 250 460 14 19 1.5 182T 1180 1.4 2.4 17 L 84.5 87.0 87.5 86.5 49.00 61.00 67.00 6.7 165 410 33 50 145T 3550 1.2 2.6 25 L 85.0 88.0 88.5 87.5 66.00 77.00 83.00 3.0 250 490 18 26 145T 1765 1.6 2.8 25 L 86.0 87.5 87.5 86.5 55.00 69.00 78.00 6.0 240 440 15 21 2 184T 1180 1.8 3.0 22 K 87.5 89.0 88.5 87.5 47.00 59.00 67.00 8.9 190 400 30 41 3 182T 3565 1.5 3.8 32 K 85.5 89.0 89.5 88.5 69.00 79.00 83.00 4.4 220 400 36 51 3 182T 1770 1.8 4.0 33 K 88.5 90.0 90.2 89.5 63.00 73.00 79.00 8.9 230 390 31 45 3 213T 1180 2.3 4.3 32 K 88.5 90.0 90.2 89.5 55.00 67.00 74.00 13.0 175 360 27 35 184T 3550 2.3 6.2 46 J 89.0 90.2 90.2 89.5 70.00 80.00 84.00 7.4 200 440 21 38 184T 1770 3.2 6.7 46 J 89.5 90.0 90.2 89.5 62.00 72.00 77.00 15.0 225 340 19 35 5 215T 1180 3.5 7.0 46 J 89.0 90.5 90.2 89.5 56.00 68.00 76.00 22.0 190 350 21 31 7.5 213T 3560 2.6 8.5 63 H 91.0 92.0 91.7 91.0 78.00 86.00 88.00 11.0 170 340 19 31 213T 1775 4.0 9.5 63 H 92.0 92.5 92.4 91.7 65.00 76.00 81.00 22.0 250 340 34 49 254T 1180 5.0 10.5 63 H 91.5 92.5 92.4 91.7 57.00 67.00 76.00 33.0 190 230 66 92 10 215T 3555 3.4 11.5 81 H 92.0 92.3 91.7 91.0 78.00 86.00 89.00 15.0 200 360 13 24 10 215T 1770 5.5 12.5 81 H 92.0 92.5 92.4 91.7 64.00 75.00 81.00 30.0 250 280 25 41 10 256T 1185 6.5 13.5 81 H 92.0 92.5 92.4 91.7 57.00 68.00 72.00 44.0 240 250 45 73 15 254T 3565 5.0 17.0 116 G 91.0 92.0 92.4 91.7 81.00 87.00 89.00 22.0 220 280 45 81 254T 1780 7.3 19.0 116 G 92.5 93.5 93.0 92.4 66.00 76.00 79.00 44.0 200 250 25 55 256T 3560 5.5 22.5 145 G 92.0 92.5 92.4 91.7 84.00 88.00 88.00 29.0 210 250 34 75 20 256T 1780 9.5 25.0 145 G 93.0 93.5 93.6 93.0 68.00 78.00 80.00 59.0 190 230 28 56 Options Selection and Pricing 15 20 Special Features Detail 7.5 7.5 Definite Purpose Motors 5 5 Hazardous Duty Motors 2 2 Severe Duty Motors 1 1 General Purpose Motors SIMOTICS Severe duty – 460V 60HZ SD100 / SD100 IEEE841 Introduction Typical performance data Typical Performance Data General Dimensions 2014 Low Voltage AC Motors Selection and Pricing Guide 4-7 Part Number Index Typical performance data, not guaranteed NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. Typical performance data SIMOTICS Explosion proof – 460V 60HZ XP100 / XP100 IDI Current (A) HP Frame FL RPM No Load Nominal Efficiency (%) Full Load Locked 460V Rotor NEMA Premium® Power Factor Locked Rotor Stall Time Torque kVA/ hp Code 1/2 Load -%- 3/4 Load -%- Full Load%- Guar. Min. -%- 1/2 Load 3/4 Load Full Load Full Load -lb-ft Locked Rotor -%- Break Down -%- Hot - sec- Cold - sec- 1 143T 3520 0.7 1.4 12 K 79.3 82.1 82.5 80.0 65.20 77.40 81.10 1.5 175 380 12 16 1 143T 1760 0.7 1.4 14 L 83.4 85.4 85.5 82.5 58.40 71.50 78.20 3.0 295 380 18 26 1 145T 1165 1.0 1.6 11 K 80.2 82.5 82.5 80.0 50.20 63.30 70.90 4.5 260 350 18 31 1 182T 870 1.5 2.1 9 J 77.0 80.0 81.5 78.5 36.00 47.00 56.00 6.0 160 280 50 68 1.5 143T 3525 1.1 2.0 19 L 80.0 83.2 84.0 81.5 64.20 77.00 83.60 2.2 270 450 14 19 1.5 145T 1740 1.1 2.1 19 L 85.8 87.0 86.5 84.0 58.50 71.80 77.30 4.5 330 420 15 21 1.5 182T 1160 1.4 2.4 16 K 85.3 87.6 87.5 85.5 48.40 58.40 66.90 6.8 205 330 34 46 1.5 184T 865 2.3 3.0 17 H 78.5 82.0 82.5 80.0 35.00 47.00 56.00 9.1 160 280 43 63 2 145T 3515 1.2 2.5 23 L 84.0 85.7 85.5 82.5 69.00 81.30 87.60 2.9 250 420 13 18 2 145T 1740 1.5 2.7 24 L 86.0 87.2 86.5 84.0 57.80 70.80 77.30 6.0 320 390 14 22 2 184T 1160 1.9 3.2 20 J 87.5 88.7 88.5 86.5 46.50 58.80 66.10 9.1 240 310 23 32 2 213T 870 2.0 3.3 16 H 84.0 84.5 84.0 81.5 51.00 63.00 67.00 12.1 170 290 22 38 3 182T 3520 1.7 3.8 30 J 84.2 86.3 86.5 84.0 69.50 79.80 85.50 4.4 185 380 20 30 3 182T 1760 2.1 4.0 33 K 87.8 89.4 89.5 87.5 59.50 71.70 78.50 9.0 235 360 17 29 3 213T 1175 2.5 4.3 32 K 87.8 89.3 89.5 87.5 52.10 65.40 73.00 13.4 265 470 23 35 3 215T 870 3.0 4.8 25 H 85.5 86.5 85.5 82.5 45.00 59.00 68.00 18.1 175 290 19 31 5 184T 3505 2.0 6.0 46 H 88.2 89.1 88.5 86.5 78.10 85.90 88.20 7.5 170 420 15 29 5 184T 1755 3.0 6.4 50 J 89.2 90.0 89.5 87.5 63.60 75.10 80.50 15.0 220 350 14 29 5 215T 1165 4.5 6.7 46 H 89.5 90.1 89.5 87.5 59.40 71.40 78.10 22.5 220 380 14 21 5 254T 875 5.5 8.8 33 F 85.5 87.0 86.5 84.0 43.00 54.00 61.00 30.0 155 210 65 115 7.5 213T 3520 3.0 8.8 63 H 89.6 90.1 89.5 87.5 78.50 86.80 89.20 11.0 180 490 17 30 42 7.5 213T 1765 5.0 9.7 63 J 90.7 91.7 91.7 90.2 60.50 72.30 78.90 22.0 270 450 25 7.5 254T 1175 5.0 10.0 63 H 91.1 91.5 91.0 89.5 58.40 70.20 77.20 45.0 165 260 26 45 7.5 256T 875 7.9 13.0 50 G 87.0 88.0 87.5 85.5 0.44 0.55 0.62 61.0 165 200 50 100 10 215T 3515 3.5 11.5 81 H 91.0 91.1 90.2 88.5 81.50 88.80 90.30 15.0 180 440 14 28 10 215T 1755 6.1 12.5 81 H 91.7 92.2 91.7 90.2 63.80 76.20 81.70 30.0 270 410 20 36 10 256T 1175 6.3 13.5 81 H 91.4 91.6 91.0 89.5 61.00 71.60 76.20 45.0 165 250 18 38 10 284T 885 11.0 17.0 81 H 88.2 89.8 90.2 89.5 42.00 53.00 61.00 59.0 160 240 15 30 15 254T 3530 5.1 17.5 116 G 90.7 91.3 91.0 89.5 80.60 87.40 88.20 22.0 210 260 24 48 15 254T 1770 11.8 19.0 116 G 92.3 92.8 92.4 91.0 64.50 74.70 80.00 44.0 185 235 21 33 15 284T 1180 8.8 17.0 93 G 90.9 91.8 91.7 91.0 53.00 66.00 73.00 67.0 150 240 22 48 15 286T 885 14.0 23.0 116 H 89.4 90.6 91.0 90.2 47.00 59.00 66.00 89.0 160 240 18 35 20 256T 3515 5.2 22.5 145 G 92.1 91.6 91.0 89.5 86.20 91.30 91.50 30.0 185 230 20 45 20 256T 1770 10.5 25.0 145 H 93.1 93.4 93.0 91.7 65.30 75.90 80.50 60.0 185 240 15 33 20 286T 1180 10.5 21.5 116 G 91.2 92.0 91.7 91.0 57.00 69.00 76.00 89.0 150 240 20 45 20 324T 885 18.0 32.0 145 G 90.0 90.8 91.0 90.2 46.00 58.00 65.00 119.0 140 200 15 35 25 284TS 3525 7.0 29.0 183 G 91.4 92.2 91.7 91.0 81.00 86.00 88.00 37.0 160 250 16 30 25 284T 1775 11.0 30.0 183 G 93.5 94.0 93.6 93.0 71.00 80.00 84.00 74.0 180 250 24 44 25 324T 1185 14.0 33.0 183 G 92.7 93.2 93.0 92.4 62.00 72.00 76.00 111.0 170 240 28 54 25 326T 885 22.0 40.0 183 G 90.4 91.2 91.0 90.2 48.00 59.00 65.00 149.0 150 200 22 40 30 286TS 3530 8.5 34.0 218 G 91.4 92.2 91.7 91.0 84.00 89.00 90.00 45.0 160 250 16 30 30 286T 1775 12.0 35.0 227 G 93.9 94.1 93.6 93.0 73.00 82.00 85.00 89.0 180 250 24 44 30 326T 1185 15.0 39.0 218 G 93.1 93.5 93.0 92.4 61.00 73.00 77.00 133.0 170 220 26 52 30 364T 885 18.0 41.0 210 G 90.6 92.0 91.7 91.0 49.00 61.00 65.00 178.0 150 200 22 40 Typical performance data, not guaranteed NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. 4-8 2014 Low Voltage AC Motors Selection and Pricing Guide Current (A) Nominal Efficiency (%) NEMA Premium® Power Factor No Load Full Load 460V Locked Rotor kVA/ hp Code 1/2 Load -%- 3/4 Load -%- Full Load%- Min. Guar. -%- 1/2 Load 3/4 Load Full Load Locked Rotor Stall Time Torque Full Load -lb-ft Locked Rotor -%- Break Down -%- Hot - sec- Cold - sec- 324TS 3535 12.0 45.0 290 G 94.0 94.1 93.6 93.0 80.00 87.00 89.00 60.0 150 250 22 45 40 324T 1780 15.0 46.0 290 G 94.3 94.1 94.1 93.6 75.00 83.00 86.00 118.0 180 230 22 45 40 364T 1185 19.0 49.0 290 G 94.4 94.6 94.1 93.6 68.00 77.00 81.00 177.0 190 220 29 55 40 365T 885 36.0 63.0 290 G 93.0 93.1 91.7 91.0 49.00 60.00 65.00 237.0 150 200 25 40 50 326TS 3535 15.0 55.0 363 G 93.8 94.1 93.6 93.0 82.00 89.00 91.00 74.0 150 250 18 37 50 326T 1780 19.0 58.0 384 G 94.8 95.0 94.5 94.1 74.00 82.00 85.00 148.0 170 230 22 45 50 365T 1185 24.0 62.0 363 G 94.0 94.3 94.1 93.6 67.00 76.00 80.00 222.0 190 220 29 55 50 404T 885 28.0 67.0 363 G 93.0 93.1 92.4 91.7 64.00 73.00 76.00 297.0 140 200 25 40 60 364TS 3565 19.0 68.0 435 G 93.8 94.1 93.6 93.0 80.00 86.00 88.00 89.0 160 250 16 28 60 364T 1780 21.0 68.0 435 G 95.2 95.4 95.0 94.5 77.00 85.00 87.00 177.0 180 240 26 38 60 404T 1185 28.0 74.0 435 G 94.2 94.7 94.5 94.1 65.00 76.00 80.00 266.0 180 220 25 50 60 405T 885 30.0 78.0 435 G 93.0 93.1 92.4 91.7 66.00 75.00 78.00 356.0 140 200 30 35 75 365TS 3565 22.0 86.0 543 G 93.7 94.3 94.1 93.6 81.00 86.00 88.00 111.0 160 260 16 27 75 365T 1780 25.0 85.0 543 G 95.6 95.8 95.4 95.0 78.00 85.00 87.00 221.0 180 240 25 35 75 405T 1185 34.0 93.0 543 G 94.7 94.9 94.5 94.1 68.00 77.00 80.00 332.0 180 220 33 45 75 444T 885 37.0 94.0 543 G 93.5 93.9 93.6 93.0 67.00 76.00 80.00 445.0 135 200 25 32 100 405TS 3570 19.0 108.0 725 G 94.6 94.7 94.1 93.6 90.00 92.00 92.00 147.0 120 200 25 45 100 405T 1780 30.0 113.0 725 G 95.8 96.0 95.4 95.0 80.00 86.00 87.00 295.0 180 200 25 35 100 444T 1185 39.0 117.0 725 G 95.1 95.3 95.0 94.5 73.00 81.00 84.00 443.0 160 200 30 35 48.0 123.0 725 G 94.2 94.5 94.1 93.6 70.00 78.00 81.00 593.0 130 200 22 30 3575 32.0 138.0 908 G 94.5 95.1 95.0 94.5 84.00 88.00 89.00 184.0 120 200 18 23 125 444T 1785 45.0 143.0 908 G 95.4 95.6 95.4 95.0 78.00 84.00 86.00 368.0 160 200 20 25 125 445T 1185 48.0 144.0 908 G 95.1 95.4 95.0 94.5 74.00 82.00 85.00 554.0 160 200 25 35 125 447T 885 54.0 152.0 908 G 94.6 94.7 94.1 93.6 70.00 79.00 82.00 742.0 130 200 20 30 150 445TS 3575 37.0 164.0 1085 G 94.8 95.2 95.0 94.5 84.00 89.00 90.00 220.0 120 200 15 18 150 445T 1785 52.0 170.0 1085 G 95.7 96.0 95.8 95.4 78.00 84.00 86.00 441.0 150 200 20 30 150 447T 1190 59.0 172.0 1085 G 95.6 96.0 95.8 95.4 73.00 82.00 85.00 662.0 140 200 28 43 150 449T 885 61.0 180.0 1085 G 94.3 94.5 94.1 93.6 72.00 80.00 83.00 890.0 130 200 20 25 200 447TS 3575 44.0 216.0 1450 G 95.3 95.6 95.4 95.0 88.00 90.00 91.00 294.0 120 200 16 20 200 447T 1785 73.0 228.0 1450 G 96.2 96.5 96.2 95.8 75.00 83.00 85.00 588.0 160 200 18 25 200 449T 1190 73.0 227.0 1450 G 95.6 96.2 95.8 95.4 75.00 83.00 86.00 883.0 125 200 25 32 200 449T 885 78.0 240.0 1450 G 95.0 95.0 94.5 94.1 71.00 79.00 83.00 1187.0 125 200 15 25 250 449TS 3575 45.0 265.0 1825 G 95.7 96.0 95.8 95.0 89.00 91.00 91.00 368.0 120 200 12 18 250 449T 1785 90.0 278.0 2100 H 96.1 96.3 96.2 95.8 78.00 85.00 87.00 735.0 140 200 18 25 250 449T 1190 86.0 281.0 2050 H 95.7 96.0 95.8 95.4 81.00 86.00 87.00 1104.0 120 200 20 25 300 449TS 3570 68.0 325.0 2200 G 95.2 95.8 95.8 95.4 86.00 90.00 91.00 441.0 100 200 12 13 300 449T 1785 114.0 338.0 2400 H 96.1 96.3 96.2 95.8 75.00 83.00 86.00 882.0 140 200 22 30 Typical Performance Data 885 444TS Options Selection and Pricing 445T 125 Special Features Detail 100 Definite Purpose Motors 40 Hazardous Duty Motors Frame Severe Duty Motors HP FL RPM General Purpose Motors SIMOTICS Explosion proof – 460V 60HZ XP100 / XP100 IDI Introduction Typical performance data General Dimensions 2014 Low Voltage AC Motors Selection and Pricing Guide 4-9 Part Number Index Typical performance data, not guaranteed NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. Typical performance data SIMOTICS Definite purpose – 460V 60HZ SD10 MS Current (A) Normal Efficiency (%) FL RPM No Load Full Load 460V Locked Rotor 1 winding variable torque Power Factor Locked Rotor Stall Time Torque kVA/ hp Code 1/2 Load -%- 3/4 Load -%- Full Load -%- 1/2 Load 3/4 Load Full Load Full load -lb-ft Locked Rotor -%- Break Down -%- Hot - sec- Cold - sec- 8.7 3.8 12 22 11.3 3.1 12.6 5 12 24 6.0 3.0 14.1 4.2 17.4 6.8 12 25 83.6 62.0 9.0 4.6 21.6 6.2 26.1 10.1 18 36 75.7 51.4 82.9 59.6 14.9 7.3 27.6 8.8 33.5 14.6 14 26 62 46 76 60 82.9 68.6 22.4 11.5 39.2 15 48.2 59.4 14 26 88.5 81.5 65.8 34.6 76.7 45.1 82.0 53.1 29.7 14.9 49 16.4 59.4 26.8 14 29 90.5 82.9 90.2 84 69 37.06 79 47.8 84.2 54.9 44.5 22.09 71.2 26.5 89 39.8 17 32 88.7 80 89 83 88.5 84 71 38 51 50 85 59 59.4 30 113 54 159 75 19 40 G 90.3 82.9 90.4 85.2 89.5 85.5 76 40 84 52 87 60 74 37 140 55 177 74 19 40 240 554 H 91.9 85 92.3 87.7 91.7 88.5 85 44 77 56 88 61 89 45 195 67 240 90 20 40 46 17 340 81 H 92.7 85.8 92.9 88.4 92.4 88.5 73 41 83 53 88 61 124 59 248 88 322 129 20 40 20.5 15.5 58 22.5 425 97 H 93.3 86.4 93.5 88.8 93 89.5 73 38 83 50 86 58 147 74 265 96 352 192 22 42 1780 885 26 18.5 93.3 86.2 458 103 G 93.3 86.2 93.5 81 93 88.5 73 39 81 51 85 59 178 89 284 112 384 178 22 45 405T 1785 890 26.5 20 86 32 568 120 G 90.5 85.8 92.6 88.1 93 88.5 79 45 84 56 86 63 220 112 352 156 550 212 23 42 100 25 444TS 1790 890 41.5 31 118 46 804 178 H 94 88.4 94.1 90.4 93.6 91 73 40 81 51 84 59 293 147 644 220 820 286 28 36 125 31 445TS 1790 890 46 39 158 57 1045 223 H 92.7 88.9 93.2 90.9 93 91.7 67 38 77 48 81 56 367 182 697 273 880 364 20 23 150 37 447TS 1785 890 64.5 45.5 176 68 1260 273 H 92.1 87.6 93.2 89.6 93.6 90.2 73 39 82 50 85 58 441 221 926 375 1190 440 24 29 200 50 449TS 1785 890 65 51 230 86 1460 291 G 92.3 91.6 93.3 92.9 94.5 93 79 43 85 53 86 58 588 295 1058 383 1410 501 22 30 449TS 1785 890 81 59 289 105 1835 366 G 92.9 90 93.6 91.1 93.6 91 79 45 85 56 87 61 735 369 1433 516 1984 590 20 25 HP Frame 1 0.25 143T 1745 850 1.3 0.8 1.8 0.9 11 2.5 K 70.5 42 74.5 48.8 75.5 52.5 47 34 60 42 69 50 3 1.5 7.5 2.4 1.5 0.37 145T 1740 855 1.4 0.9 2.2 1 14.6 3.3 K 79.7 48.5 81.9 53.9 81.5 55.5 57 47 70.4 58.7 78.3 62.4 4.5 2.2 2 0.5 182T 1745 865 1.2 0.9 2.7 1.3 20 4.9 K 82.7 60.72 84.3 67.1 84 70 62.6 33.3 76.16 42.7 82.57 51.45 3 0.75 184T 1735 855 2 1.1 4 1.5 32 5.5 J 85.5 69.8 85.4 74.1 84 75.5 69 40.4 79 52.5 5 1.2 213T 176 865 3.6 1.9 6.6 2.4 46 9 J 84.6 72.05 85.9 76.9 85.5 78.5 62.6 40.2 7.5 1.9 215T 1760 865 5.2 2.6 9.9 3.5 63 13 J 85 170 86 72.5 85.5 74 10 2.5 254T 1770 880 6 4.3 12.9 5.4 81 18 H 87.8 75 88.7 79.7 15 3.7 256T 1770 880 7.7 5.6 18.5 7.5 115 26 J 89.8 79 20 5 284T 1770 880 10 7.2 25 9.3 153 37 G 25 6.2 286T 1765 880 10.5 8 30 11.5 177 46 30 7.5 324T 1770 885 11.5 8.5 35 13 40 10 326T 1770 885 16 11.2 50 12.5 364T 1780 890 60 15 365T 75 19 250 62.5 Typical performance data, not guaranteed 4-10 2014 Low Voltage AC Motors Selection and Pricing Guide Introduction Typical performance data FL Torque (lb-ft) Max. Torque Const. HP (lb-ft.) Max. RPM Const. HP FL RPM Speed Range F.L. RPM FL Amps NL Amps 1 145T 1800 1000:1 1740 1.4 1.1 3 1.5 1 182T 1200 1000:1 1175 1.8 1.5 4.5 2.3 1.5 182T 3600 1000:1 3485 2 1.6 2.3 1.5 182T 1800 1000:1 1740 2.2 1.8 1.5 184T 1200 1000:1 1160 2.4 2 184T 3600 1000:1 3505 2 182T 1800 1000:1 2 213T 1200 3 213T 3600 3 184T 3 5 X1 X2 XM R1 R2 3480 7.12 8.21 335 11.28 7.59 2400 5.2 9.40 185 6.28 4.54 1.5 5225 4.34 2.21 193 2.84 2.02 4.5 2.2 3480 4.93 8.37 305 5.48 4.45 1.9 6.8 3.4 2320 3.59 7.37 145 4.26 3.43 2.5 1.7 3 2 5275 2.62 1.54 135 1.86 1.4 1740 2.7 1.8 6.1 3 3480 3.7 6.07 209 4.32 3.57 1000:1 1160 3.2 2.3 9.1 4.5 2320 3.24 4.57 130 3.25 1.73 1000:1 3510 3.7 3.3 4.5 3 5265 2.08 1.46 83.6 1.2 0.71 1800 1000:1 1740 4.2 3.2 9.1 4.5 3480 2.17 3.78 123 2.58 2.29 215T 1200 1000:1 1160 4.3 3.1 14 6.8 2320 2.01 2.91 86.8 1.99 1.23 215T 3600 1000:1 3510 5.8 3.5 7.5 5 5265 1.67 1.27 74 0.97 0.6 1760 6.5 4.2 15 7.5 3520 1.6 3.2 84 1.3 0.92 1165 7.1 4.5 23 11.3 2330 1.66 1.89 54.3 0.82 0.58 7.5 254T 3600 1000:1 3510 8.7 5 11 7.5 5265 1.33 1.03 57.6 0.39 0.31 7.5 254T 1800 1000:1 1775 9.5 7.3 23 11.1 3550 1.3 2.7 66 0.7 0.52 7.5 256T 1200 1000:1 1165 10 5 34 16.8 2330 1.41 1.71 52.1 0.68 0.53 10 256T 3600 1000:1 3515 12.5 6 15 10 5270 0.95 0.8 40.3 0.3 0.27 10 256T 1800 1000:1 1770 12.5 5.7 30 15 3500 0.86 1.90 48 0.45 0.38 10 256T 1200 1000:1 1165 13 10 45 22 2330 1.41 1.71 52 0.68 0.53 15 254T 3600 1000:1 3530 18 5 22 15 5295 1.33 1.03 57.6 0.39 0.31 15 254T 1800 1000:1 1760 20 7.3 45 22 3520 0.85 1.61 38.5 0.38 0.34 15 284T 1200 1000:1 1175 20 10 67 40 1955 1.00 1.11 26.3 0.40 0.24 20 256T 3600 1000:1 3525 23 7.4 30 20 5285 0.95 0.80 40.3 0.30 0.27 20 256T 1800 1000:1 1755 27 9.1 60 30 3510 0.60 1.26 30.7 0.26 0.26 20 286T 1200 1000:1 1175 26 12 89 54 1955 0.77 0.93 22.9 0.29 0.21 25 284TS 3600 1000:1 3525 29 8 37 25 4700 0.55 1.14 38.5 0.27 0.21 25 284T 1800 1000:1 1765 29 13 74 50 2940 0.55 0.88 22.8 0.19 0.18 25 324T 1200 1000:1 1180 33 15 111 67 1965 0.67 0.65 16.1 0.17 0.15 30 286TS 3600 1000:1 3525 34 9.5 45.0 30 4700 0.42 0.98 33.8 0.2 0.17 30 286T 1800 1000:1 1765 35 15 89 60 2940 0.44 0.75 20.3 0.15 0.15 30 326T 1200 1000:1 1180 39 19 134 80 1965 0.56 0.56 13.9 0.15 0.13 40 324TS 3600 1000:1 3530 46 12 60 48 4705 0.33 0.60 22.6 0.088 0.100 40 324T 1800 1000:1 1770 47 15 119 79 2940 0.38 0.67 18.5 0.110 0.100 40 364T 1200 1000:1 1180 52 24 178 119 1770 0.41 0.70 11.6 0.100 0.070 50 326TS 3600 1000:1 3530 55 15 74 60 4705 0.25 0.49 18.8 0.072 0.083 50 326T 1800 1000:1 1770 58 18 148 99 2950 0.31 0.54 15.8 0.082 0.082 50 365T 1200 1000:1 1180 66 30 223 148 1770 0.32 0.58 10.4 0.081 0.058 Typical Performance Data 1000:1 1000:1 Options Selection and Pricing 1800 1200 Special Features Detail 213T 254T Definite Purpose Motors 5 5 Hazardous Duty Motors Frame Severe Duty Motors HP Ohms/Phase (Y equiv.) Circuit Parameter 25ºC General Purpose Motors SIMOTICS Definite purpose – 460V 60HZ Constant torque 1000:1 RGKESDI / RGZESDI Inverter duty only General Dimensions 2014 Low Voltage AC Motors Selection and Pricing Guide 4-11 Part Number Index Typical performance data, not guaranteed Typical performance data SIMOTICS Definite purpose – 460V 60HZ RGKESDI / RGZESDI Constant torque 1000:1 Inverter duty only FL Torque (lb-ft) Max Torque Const. HP (lb-ft) Max RPM Const. HP HP Frame FL RPM Speed Range F.L. RPM FL Amps NL Amps 60 364TS 3600 1000:1 3565 68 19 89 89 60 364T 1800 1000:1 1775 71 21 178 118 60 404TS 1200 1000:1 1185 72 26 266 75 365TS 3600 1000:1 3565 85 22 111 75 365T 1800 1000:1 1775 87 27 Ohms/Phase (Y equiv.) Circuit Parameter 25ºC X1 X2 XM R1 R2 4455 0.30 0.56 14.8 0.066 2660 0.30 0.46 11.6 0.066 177 1775 0.35 0.58 10.8 0.049 111 4455 0.20 0.46 12.8 0.045 222 148 2660 0.23 0.37 9.2 0.051 75 405TS 1200 1000:1 1185 87 34 332 222 1775 0.26 0.45 8.4 0.035 100 405TS 3600 1000:1 3570 110 19 147 147 3570 0.21 0.32 16.0 0.034 100 405TS 1800 1000:1 1780 113 30 295 197 2670 0.2 0.37 9.6 0.028 100 444TS 1200 1000:1 1185 115 38 443 296 1775 0.17 0.35 7.3 0.026 125 444TS 3600 1000:1 3575 136 32 184 184 3575 0.14 0.27 8.8 0.018 125 444TS 1800 1000:1 1785 143 42 368 245 2675 0.14 0.33 6.7 0.017 125 445TS 1200 1000:1 1185 144 44 554 370 1775 0.14 0.29 6.2 0.02 150 445TS 3600 1000:1 3575 160 37 220 220 3575 0.1 0.21 7.2 0.012 150 445TS 1800 1000:1 1785 169 45 441 294 2675 0.12 0.3 6.1 0.015 150 447TS 1200 1000:1 1185 169 45 665 444 1775 0.13 0.28 6.1 0.017 200 447TS 3600 1000:1 3575 208 40 294 294 3575 0.087 0.2 7.0 0.01 200 447TS 1800 1000:1 1785 223 60 588 471 2375 0.085 0.22 4.6 0.01 200 449TS 1200 1000:1 1185 222 55 886 592 1775 0.092 0.21 4.8 0.013 250 449TS 3600 1000:1 3570 264 45 368 368 3570 0.690 0.17 6.4 0.008 250 449TS 1800 1000:1 1785 282 78 735 589 2380 0.064 0.18 3.7 0.007 250 449TS 1200 1000:1 1185 285 75 1108 739 1775 0.076 0.18 3.8 0.01 300 449TS 3600 1000:1 3575 330 68 441 441 3575 0.051 0.13 4.1 0.006 300 449TS 1800 1000:1 1785 345 110 882 706 2380 0.052 0.141 2.7 0.007 300 S449SS 1200 1000:1 1185 335 90 1329 886 1775 0.092 0.091 3.2 0.007 350 S449SS 3600 1000:1 3570 370 67 515 515 3570 0.064 0.062 4.2 0.005 350 S449SS 1800 1000:1 1785 390 115 1029 825 2380 0.066 0.079 2.4 0.004 350 S449SS 1200 1000:1 1185 396 133 1551 1034 1775 0.069 0.067 2.3 0.005 400 S449SS 3600 1000:1 3570 420 80 588 588 3570 0.052 0.052 3.5 0.004 400 S449SS 1800 1000:1 1785 450 138 1176 942 2380 0.060 0.071 2.0 0.003 Typical performance data, not guaranteed 4-12 2014 Low Voltage AC Motors Selection and Pricing Guide Introduction Typical performance data Current (A) Normal Efficiency (%) Solid shaft vertical motors Power Factor Locked Rotor Stall Time Torque No Load Full Load 460V Locked Rotor kVA/ hp Code 1/2 Load -%- 3/4 Load -%- Full Load -%- 1/2 Load 3/4 Load Full Load Full load -lb-ft Locked Rotor -%- Break Down -%- Hot - sec - Cold - sec - 1.5 13 L 78.5 81.6 82.5 54 67 76 3 275 320 16 35 1 1.6 10 J 79.9 82.3 82.5 48 62 79 4.5 240 300 19 31 1 182 860 1.2 1.9 8 H 75.1 77.4 77 43 55 64 6.1 220 260 20 40 1.5 143 3520 1 1.9 18 L 76.5 80.7 82.5 76 85 90 2.2 270 320 15 33 1.5 145 1750 1.3 2.2 19 L 81.5 83.6 84 55 68 76 4.5 290 320 15 32 1.5 182 1160 1.5 2.3 16 K 80.2 82.7 84 51 65 73 6.8 280 320 22 33 1.5 184 855 1.8 2.6 13 H 76.5 78.9 78.5 46 59 69 9.2 220 270 18 30 2 145 3515 1.1 2.5 22 K 79.4 82.9 84 75 84 89 3 260 320 15 33 2 145 1740 1.5 2.7 21 K 83.2 84.5 84 61 74 82 6 260 310 13 27 2 184 1160 1.9 3 22 K 83.5 85.0 85.5 51 64 73 9.1 220 300 21 32 2 213 865 2.2 3.3 17 H 79.0 81.0 81.5 47 61 70 12 200 290 18 30 3 182 3510 1.7 3.6 32 K 82.8 85.2 85.5 76 85 91 4.5 230 320 15 34 3 182 1740 1.8 3.9 30 K 86.5 87.0 86.5 66 77 83 9.1 260 300 16 35 3 213 1165 2.3 4 32 K 84.8 86.6 86.5 59 74 81 14 210 300 17 35 3 215 865 3.1 4.7 26 H 81.0 82.7 82.5 49 63 72 18 190 280 15 32 5 184 3490 1.8 5.8 46 J 85.5 86.8 86.5 83 90 93 8 260 320 12 26 5 184 1730 3.2 6.5 46 J 86.5 87.2 86.5 64 76 83 15 260 300 17 36 5 215 1160 3.3 6.8 46 J 88.0 88.7 87.5 60 72 79 23 210 300 14 29 5 254 865 4.1 7.5 40 H 85.0 86.0 85.5 54 67 73 30 180 260 13 25 7.5 213 3515 3.4 8.8 64 H 86.0 87.0 87.5 78 87 91 11 190 280 11 25 7.5 213 1750 4.2 9.5 64 H 88.0 89.0 88.5 66 77 84 23 210 270 14 29 7.5 254 1170 4.5 9.8 60 H 88.9 89.2 88.5 61 75 81 34 180 250 18 35 7.5 256 865 6.6 11.5 64 H 86.0 87.0 86.5 50 62 70 46 190 260 15 30 10 215 3505 4 12 81 H 88.0 88.8 88.5 81 90 88 15 190 260 14 29 10 215 1750 5.4 12.5 81 H 88.5 89.0 88.5 69 80 85 30 210 270 15 30 10 256 1165 5 13 75 G 90.0 89.8 88.5 66 76 81 45 170 250 18 35 10 284 875 9.1 15 81 H 87.9 89.4 89.5 51 62 70 60 150 220 15 30 15 254 3530 5 17 116 G 86.8 88.3 88.5 85 91 93 22 190 260 17 31 15 254 1760 7.3 19 116 G 90.2 90.6 90.2 69 79 83 45 190 260 18 35 15 284 1175 10 20 116 G 89.5 90.2 89.5 58 72 78 67 160 270 20 45 15 286 875 14 23 116 G 88.6 89.9 89.5 51 61 68 90 150 220 18 35 20 256 3525 7.4 23 145 G 86.6 88.2 88.5 84 88 92 30 180 260 17 25 20 256 1755 9.1 26 145 G 90.6 90.9 90.2 68 77 81 60 190 270 18 35 20 286 1175 12 26 145 G 90.6 90.9 90.2 63 74 80 89 160 250 19 43 20 324 880 18 31 145 G 88.5 89.7 89.5 51 62 68 119 140 200 15 35 25 284 3525 8 29 183 G 90.5 90.7 90.2 81 86 89 37 160 250 16 30 25 284 1765 13 29 183 G 92.0 92.3 91.7 73 83 88 74 220 280 19 40 25 324 1180 15 33 183 G 90.8 91.3 91 58 70 78 111 170 240 25 50 25 326 880 22 38 183 G 87.5 88.8 88.5 51 63 70 149 150 200 22 40 Typical Performance Data 1 1160 Options Selection and Pricing 1745 145 Special Features Detail 143 1 Definite Purpose Motors 1 Hazardous Duty Motors Frame Severe Duty Motors HP FL RPM General Purpose Motors SIMOTICS Definite purpose – 460V 60HZ RGZVESD / RGZVILESD General Dimensions 2014 Low Voltage AC Motors Selection and Pricing Guide 4-13 Part Number Index Typical performance data, not guaranteed Typical performance data SIMOTICS Definite purpose – 460V 60HZ RGZVESD / RGZVILESD Current (A) Normal Efficiency (%) Solid shaft vertical motors Power Factor Locked Rotor Stall Time Torque No Load Full Load 460V Locked Rotor kVA/ hp Code 1/2 Load -%- 3/4 Load -%- Full Load -%- 1/2 Load 3/4 Load Full Load Full load -lb-ft Locked Rotor -%- Break Down -%- Hot - sec - Cold - sec - HP Frame FL RPM 30 286 3525 9.5 34 218 G 91.3 91.5 91.0 86 91 92 45.0 160 250 16 30 30 286 1765 15 35 218 G 91.9 92.3 91.7 73 84 88 89 220 280 19 40 30 326 1180 19 39 218 G 91.2 91.5 91.0 59 71 79 134 170 240 25 50 30 364 885 26 47 218 G 88.4 89.8 89.5 51 63 67 178 150 200 22 40 40 324 3530 12 45 290 G 92.8 92.9 92.4 81 88 90 60 150 250 22 45 40 324 1770 15 47 290 G 92.8 93.0 92.4 78 83 86 119 190 240 20 40 40 364 1180 24 52 290 G 92.4 92.7 92.4 60 72 78 178 170 230 29 55 40 365 885 36 63 290 G 89.2 90.5 90.2 50 61 66 237 150 200 25 40 50 326 3530 15 55 363 G 92.9 93.0 92.4 83 90 92 74 150 250 18 37 50 326 1770 18 58 363 G 92.9 93.0 92.4 78 88 87 148 190 240 20 40 50 365 1180 30 66 363 G 92.8 93.0 92.4 61 72 77 223 170 230 29 55 50 404 885 28 67 363 G 90.8 90.9 90.2 65 74 77 297 140 200 25 45 60 364 3565 19 68 435 G 92.6 92.9 92.4 81 87 89 89 160 250 16 28 60 364 1775 21 71 435 G 92.7 92.9 92.4 75 83 86 178 160 240 22 45 60 404 1185 26 74 435 G 93 93.4 93.0 71 79 82 266 150 200 25 50 60 405 885 30 78 435 G 90.8 90.9 90.2 68 77 80 356 140 200 30 35 75 365 3565 22 85 543 G 93.2 93.4 93.0 82 87 89 111 160 260 16 27 75 365 1775 27 87 543 G 93.3 93.5 93.0 75 84 86 222 155 240 22 45 75 405 1185 34 93 543 G 93.8 94.0 93.6 69 78 81 332 150 200 33 45 75 444 885 37 94 543 G 91.6 92.0 91.7 68 77 81 445 135 200 25 32 100 405 3570 19 108 725 G 93.5 93.6 93.0 91 93 93 147 120 200 25 45 100 405 1780 30 113 725 G 94 94.3 93.6 81 86 88 295 160 200 25 35 100 444 1185 38 117 725 G 93.7 94.0 93.6 76 83 86 443 140 200 30 35 100 445 885 48 123 725 G 93.1 93.4 93.0 71 79 82 593 130 200 22 30 125 444 3575 32 138 908 G 93.1 93.7 93.6 86 90 91 184 120 200 18 23 125 444 1785 42 143 908 G 94.2 94.4 94.1 79 85 87 368 160 200 20 25 125 445 1185 44 144 908 G 93.8 94.0 93.6 79 85 87 554 140 200 25 35 125 447 885 54 152 908 G 92.9 93.0 92.4 71 80 83 742 130 200 20 40 150 445 3575 37 164 1085 G 93.9 94.3 94.1 85 90 91 220 120 200 15 18 150 445 1785 45 170 1085 G 94.4 94.7 94.5 81 86 87 441 150 200 20 30 150 447 1185 45 170 1085 G 94.5 94.7 94.1 82 87 88 665 125 200 28 43 150 447 885 72 186 1085 G 93.0 93.4 93.0 68 77 81 890 130 200 20 25 200 447 3575 40 216 1450 G 94.0 94.3 94.1 89 91 92 294 120 200 16 20 200 447 1785 60 225 1450 G 94.7 94.8 94.5 82 87 88 588 150 200 18 25 200 449 1185 55 226 1450 G 94.5 94.6 94.1 83 87 88 886 125 200 25 32 200 449 885 101 241 1450 G 93.8 94 93.6 72 80 83 1186 125 200 15 25 250 449 3570 45 267 1825 G 94.0 94.3 94.1 91 93 93 368 120 200 12 18 250 449 1785 78 281 1825 G 94.5 94.7 94.5 81 86 88 735 140 200 18 25 250 449 1185 75 280 1825 G 94.5 94.6 94.1 83 88 89 1108 120 200 20 25 Typical performance data, not guaranteed 4-14 2014 Low Voltage AC Motors Selection and Pricing Guide General purpose Frames 140-250 General Purpose Motors GP100A Introduction General dimensions Severe Duty Motors DRAIN HOLE 2F N-W P U BA AB 2E D O R S ES 143T All 14.37 4.00 2.25 7.6 0.875 2.25 7.00 5.5 3.50 7.28 0.771 0.188 1.41 145T All 14.37 5.00 2.25 7.6 0.875 2.25 7.00 5.5 3.50 7.28 0.771 0.188 1.41 182T All 16.68 4.50 2.75 8.7 1.125 2.75 6.94 7.5 4.50 8.87 0.986 0.250 1.81 184T All 16.68 5.50 2.75 8.7 1.125 2.75 6.94 7.5 4.50 8.87 0.986 0.250 1.81 213T All 20.65 5.50 3.38 10.3 1.375 3.50 8.27 8.5 5.25 10.41 1.201 0.312 2.44 215T All 20.65 7.00 3.38 10.3 1.375 3.50 8.27 9.0 5.25 10.41 1.201 0.312 2.44 254T All 26.16 8.25 4.00 12.4 1.625 4.25 9.35 10.0 6.25 12.43 1.416 0.375 2.91 256T All 26.16 10.00 4.00 12.4 1.625 4.25 9.35 10.0 6.25 12.43 1.416 0.375 2.91 Frame Poles BA* AH AJ AK BD BF # BF Frame Poles BA* AH AJ AK BD BF # BF 143TC All 2.25 2.12 5.875 4.5 6.60* 4 3/8-16” NC 143TD All 2.25 2.25 10.0 9.0 10.90 4 0.53 145TC All 2.25 2.12 5.875 4.5 6.60* 4 3/8-16” NC 145TD All 2.25 2.25 10.0 9.0 10.90 4 0.53 182TC All 2.75 2.62 7.250 8.5 8.90 4 1/2-13” NC 182TD All 2.75 2.75 10.0 9.0 11.00 4 0.53 184TC All 2.75 2.62 7.250 8.5 8.90 4 1/2-13” NC 184TD All 2.75 2.75 10.0 9.0 11.00 4 0.53 213TC All 3.50 3.12 7.250 8.5 8.90 4 1/2-13” NC 213TD All 3.50 3.38 10.0 9.0 10.90 4 0.53 215TC All 3.50 3.12 7.250 8.5 8.90 4 1/2-13” NC 215TD All 3.5 3.38 10.0 9.0 10.90 4 0.53 254TC All 4.25 3.75 7.250 8.5 9.30 4 1/2-13” NC 254TD All 4.25 4.00 12.5 11.0 13.90 4 0.53 256TC All 4.25 3.75 7.250 8.5 9.30 4 1/2-13” NC 256TD All 4.25 4.00 12.5 11.0 13.90 4 0.53 Special Features Detail C Definite Purpose Motors Poles Hazardous Duty Motors Keyseat Frame Options Selection and Pricing D-Flange 5-1 Part Number Index 2014 Low Voltage AC Motors Selection and Pricing Guide General Dimensions Dimensions in inches. Typical dimensions data, not guaranteed. *Not according to NEMA. Typical Performance Data C-Face General dimensions GP100 General purpose Frames 140–250 DRAIN HOLE Keyseat Frame Poles C 2F N-W P U BA AB 2E D O R S ES 143T All 14.40 4.00 2.25 7.6 0.875 2.25 6.90 5.5 3.50 7.50 0.771 0.188 1.41 145T All 14.40 5.00 2.25 7.6 0.875 2.25 6.90 5.5 3.50 7.50 0.771 0.188 1.41 182T All 16.70 4.50 2.75 9.6 1.125 2.75 7.80 7.5 4.50 11.10 0.986 0.250 1.81 184T All 16.70 5.50 2.75 9.6 1.125 2.75 7.80 7.5 4.50 11.10 0.986 0.250 1.81 213T All 20.70 5.50 3.38 10.7 1.375 3.50 9.45 8.5 5.25 10.66 1.201 0.312 2.44 215T All 20.70 7.00 3.38 10.7 1.375 3.50 9.45 9.0 5.25 10.66 1.201 0.312 2.44 254T All 26.16 8.25 4.00 12.9 1.625 4.25 10.197 10.0 6.25 12.75 1.416 0.375 2.91 256T All 26.16 10.00 4.00 12.9 1.625 4.25 10.197 10.0 6.25 12.75 1.416 0.375 2.91 D-Flange C-Face Frame Poles BA* AH AJ AK BD BF # BF Frame Poles BA* AH AJ AK BD BF # BF 143TC All 2.25 2.12 5.875 4.5 6.60* 4 3/8-16” NC 143TD All 2.25 2.25 10.0 9.0 10.90 4 0.53 145TC All 2.25 2.12 5.875 4.5 6.60* 4 3/8-16” NC 145TD All 2.25 2.25 10.0 9.0 10.90 4 0.53 182TC All 2.75 2.62 7.250 8.5 8.90 4 1/2-13” NC 182TD All 2.75 2.75 10.0 9.0 11.00 4 0.53 184TC All 2.75 2.62 7.250 8.5 8.90 4 1/2-13” NC 184TD All 2.75 2.75 10.0 9.0 11.00 4 0.53 213TC All 3.50 3.12 7.250 8.5 8.90 4 1/2-13” NC 213TD All 3.50 3.38 10.0 9.0 10.90 4 0.53 215TC All 3.50 3.12 7.250 8.5 8.90 4 1/2-13” NC 215TD All 3.50 3.38 10.0 9.0 10.90 4 0.53 254TC All 4.25 3.75 7.250 8.5 9.30 4 1/2-13” NC 254TD All 4.25 4.00 12.5 11.0 13.90 4 0.81 256TC All 4.25 3.75 7.250 8.5 9.30 4 1/2-13” NC 256TD All 4.25 4.00 12.5 11.0 13.90 4 0.81 Dimensions in inches. Typical dimensions data, not guaranteed. *Not according to NEMA. 5-2 2014 Low Voltage AC Motors Selection and Pricing Guide General purpose Frames 280-320 General Purpose Motors GP100 Introduction General dimensions Severe Duty Motors J Poles C 2F N-W P U BA AB 2E D O R S ES 284T All 29.38 9.5 4.63 15.8 1.875 4.75 13.63 11.0 7 14.87 1.59 0.500 3.25 286T All 29.38 11.0 4.63 15.8 1.875 4.75 13.63 11.0 7 14.87 1.59 0.500 3.25 284TS All 28.00 9.5 3.25 15.8 1.625 4.75 13.63 11.0 7 14.87 1.42 0.375 1.88 All 28.00 11.0 3.25 15.8 1.625 4.75 13.63 11.0 7 14.87 1.42 0.375 1.88 324T All 32.07 10.5 5.25 17.7 2.125 5.25 14.14 12.5 8 16.66 1.85 0.500 3.88 326T All 32.07 12.0 5.25 17.7 2.125 5.25 14.14 12.5 8 16.66 1.85 0.500 3.88 324TS All 30.57 10.5 3.75 17.7 1.875 5.25 14.14 12.5 8 16.66 1.59 0.500 2.00 326TS All 30.57 12.0 3.75 17.7 1.875 5.25 14.14 12.5 8 16.66 1.59 0.500 2.00 Definite Purpose Motors 286TS Hazardous Duty Motors Keyseat Frame Special Features Detail Options Selection and Pricing Poles BA AH AJ AK BD BF # BF Frame Poles BA AH AJ AK BD BF # BF 284T All 4.75 4.38 9 10.5 11.25 4 1/2-13” NC 284TD All 4.75 4.62 12.5 11 14 4 0.81 286T All 4.75 4.38 9 10.5 11.25 4 1/2-13” NC 286TD All 4.75 4.62 12.5 11 14 4 0.81 284TS All 4.75 3.00 9 10.5 11.25 4 1/2-13” NC 284TSD All 4.75 3.25 12.5 11 14 4 0.81 286TS All 4.75 3.00 9 10.5 11.25 4 1/2-13” NC 286TSD All 4.75 3.25 12.5 11 14 4 0.81 324T All 5.25 5.00 11 12.5 14.00 4 5/8-11” NC 324TD All 5.25 5.25 16.0 14 18 4 0.81 All 5.25 5.00 11 12.5 14.00 4 5/8-11” NC 326TD All 5.25 5.25 16.0 14 18 4 0.81 All 5.25 3.50 11 12.5 14.00 4 5/8-11” NC 324TSD All 5.25 3.75 16.0 14 18 4 0.81 326TS All 5.25 3.50 11 12.5 14.00 4 5/8-11” NC 326TSD All 5.25 3.75 16.0 14 18 4 0.81 2014 Low Voltage AC Motors Selection and Pricing Guide 5-3 Part Number Index Dimensions in inches. Typical dimensions data, not guaranteed. General Dimensions 326T 324TS Typical Performance Data D-Flange C-Face Frame General dimensions GP100 General purpose Frames 360-400 J Keyseat Frame Poles C 2F N-W P U BA AB 2E D O R S ES 364T All 35.53 11.25 5.88 19.6 2.375 5.88 17.56 14 9 18.48 2.02 0.625 4.25 365T All 35.53 12.25 5.88 19.6 2.375 5.88 17.56 14 9 18.48 2.02 0.625 4.25 364TS All 33.40 11.25 3.75 19.6 1.875 5.88 17.56 14 9 18.48 1.59 0.500 2.00 365TS All 33.40 12.25 3.75 19.6 1.875 5.88 17.56 14 9 18.48 1.59 0.500 2.00 404T All 39.50 12.25 7.25 19.6 2.875 6.62 17.68 16 10 19.60 2.45 0.750 5.63 405T All 39.50 13.75 7.25 19.6 2.875 6.62 17.68 16 10 19.60 2.45 0.750 5.63 404TS All 36.50 12.25 4.25 19.6 2.125 6.62 17.68 16 10 19.60 1.85 0.500 2.75 405TS All 36.50 13.75 4.25 19.6 2.125 6.62 17.68 16 10 19.60 1.85 0.500 2.75 Frame Poles BA AH AJ AK BD BF # BF Frame Poles BA* AH AJ AK BD BF # BF 364TC All 5.88 5.63 11 12.5 14.00 8 5/8”-11NC 364TD All 6.75 5.88 16 14.0 18.00 4 0.81 0.81 C-Face D-Flange 365TC All 5.88 5.63 11 12.5 14.00 8 5/8”-11NC 365TD All 6.75 5.88 16 14.0 18.00 4 364TSC All 5.88 3.50 11 12.5 14.00 8 5/8”-11NC 364TSD All 6.75 3.75 16 14.0 18.00 4 0.81 365TSC All 5.88 3.50 11 12.5 14.00 8 5/8”-11NC 365TSD All 6.75 3.75 16 14.0 18.00 4 0.81 404TC All 6.62 7.00 11 12.5 15.50 8 5/8”-11NC 404TD All 7.12 7.25 20 18.0 22.00 8 0.81 405TC All 6.62 7.00 11 12.5 15.50 8 5/8”-11NC 405TD All 7.12 7.25 20 18.0 22.00 8 0.81 404TSC All 6.62 4.00 11 12.5 15.50 8 5/8”-11NC 404TSD All 7.12 4.25 20 18.0 22.00 8 0.81 405TSC All 6.62 4.00 11 12.5 15.50 8 5/8”-11NC 405TSD All 7.12 4.25 20 18.0 22.00 8 0.81 Dimensions in inches. Typical dimensions data, not guaranteed. *Not according to NEMA. 5-4 2014 Low Voltage AC Motors Selection and Pricing Guide General purpose Frames 440 General Purpose Motors GP100 Introduction General dimensions Severe Duty Motors J Poles C 2F N-W P U BA AB 2E D O R S ES 444T All 45.60 14.5 8.50 21.8 3.375 7.5 18.88 18 11 21.8 2.88 0.875 6.88 45.60 16.5 8.50 21.8 3.375 7.5 18.88 18 11 21.8 2.88 0.875 6.88 All 41.80 14.5 4.75 21.8 2.375 7.5 18.88 18 11 21.8 2.02 0.625 3.00 445TS All 41.80 16.5 4.75 21.8 2.375 7.5 18.88 18 11 21.8 2.02 0.625 3.00 447T All 49.10 20.0 8.50 21.8 3.375 7.5 18.88 18 11 21.8 2.88 0.875 6.88 447TS All 45.40 20.0 4.75 21.8 2.375 7.5 18.88 18 11 21.8 2.02 0.625 3.00 449T All 54.10 25.0 8.50 21.8 3.375 7.5 18.88 18 11 21.8 2.88 0.875 6.88 449TS All 50.30 25.0 4.75 21.8 2.375 7.5 18.88 18 11 21.8 2.02 0.625 3.00 Frame Poles BA AH AJ AK BD BF # BF Frame Poles BA AH AJ AK BD BF # BF 444TC All 7.5 8.25 14 16 18 8 5/8”-11NC 444TD All 7.5 8.50 20 18 22 8 0.81 Special Features Detail All Definite Purpose Motors 445T 444TS Hazardous Duty Motors Keyseat Frame Options Selection and Pricing All 7.5 8.25 14 16 18 8 5/8”-11NC 445TD All 7.5 8.50 20 18 22 8 0.81 All 7.5 4.50 14 16 18 8 5/8”-11NC 444TSD All 7.5 4.75 20 18 22 8 0.81 445TSC All 7.5 4.50 14 16 18 8 5/8”-11NC 445TSD All 7.5 4.75 20 18 22 8 0.81 447TC All 7.5 8.25 14 16 18 8 5/8”-11NC 447TD All 7.5 8.50 20 18 22 8 0.81 447TSC All 7.5 4.50 14 16 18 8 5/8”-11NC 447TSD All 7.5 4.75 20 18 22 8 0.81 449TC All 7.5 8.25 14 16 18 8 5/8”-11NC 449TD All 7.5 8.50 20 18 22 8 0.81 449TSC All 7.5 4.50 14 16 18 8 5/8”-11NC 449TSD All 7.5 4.75 20 18 22 8 0.81 2014 Low Voltage AC Motors Selection and Pricing Guide 5-5 Part Number Index Dimensions in inches. Typical dimensions data, not guaranteed. General Dimensions 445TC 444TSC Typical Performance Data D-Flange C-Face General dimensions SD100 Severe Duty Frames 140-280 Keyseat Frame Poles C 2F N-W P U BA AB 2E D O R S ES 143T All 14.2 4.00 2.25 8.2 0.875 2.250 7.40 5.5 3.50 7.50 0.771 0.188 1.41 145T All 14.2 5.00 2.25 8.2 0.875 2.250 7.40 5.5 3.50 7.50 0.771 0.188 1.41 182T All 16.4 4.50 2.75 9.6 1.125 2.750 8.20 7.5 4.50 11.10 0.986 0.250 1.81 184T All 16.4 5.50 2.75 9.6 1.125 2.750 8.20 7.5 4.50 11.10 0.986 0.250 1.81 213T All 20.2 5.50 3.38 10.7 1.375 3.500 10.39 8.5 5.25 10.66 1.201 0.312 2.44 215T All 20.2 7.00 3.38 10.7 1.375 3.500 10.39 8.5 5.25 10.66 1.201 0.312 2.44 254T All 25.8 8.25 4.00 12.9 1.625 4.250 11.14 10.0 6.25 12.75 1.416 0.375 2.91 256T All 25.8 10.00 4.00 12.9 1.625 4.250 11.14 10.0 6.25 12.75 1.416 0.375 2.91 284T 4,6 29.4 9.50 4.63 15.8 1.875 4.750 14.30 11.0 7.00 14.87 0.500 1.591 3.25 286T 4,6 29.4 11.00 4.63 15.8 1.875 4.750 14.30 11.0 7.00 14.87 0.500 1.591 3.25 C-Face D-Flange Frame Poles BA* AH AJ AK BD BF # BF Frame Poles BA AH AJ AK BD BF # BF 143TC All 2.25 2.12 5.875 4.5 6.50 4 3/8”-16NC 143TD All 2.25 2.00 10.0 4.5 11 4 0.53 145TC All 2.25 2.12 5.875 4.5 6.50 4 3/8”-16NC 145TD All 2.25 2.00 10.0 9.0 11 4 0.53 182TC All 2.75 2.62 7.250 8.5 9.00 4 1/2”-13NC 182TD All 2.75 2.50 10.0 9.0 11 4 0.53 182TCH All 2.75 2.62 5.875 4.5 6.50 4 1/2”-13NC 184TD All 2.75 2.50 10.0 9.0 11 4 0.53 184TCH All 2.75 2.62 7.250 4.5 6.50 4 1/2”-13NC 213TD All 3.50 3.13 10.0 9.0 11 4 0.53 213TC All 3.50 3.12 5.875 8.5 9.00 4 1/2”-13NC 215TD All 3.50 3.13 10.0 9.0 11 4 0.53 215TC All 3.50 3.12 7.250 8.5 9.00 4 1/2”-13NC 254TD All 4.25 3.75 12.5 11.0 14 4 0.81 254TC All 4.25 3.75 7.250 8.5 10.00 4 1/2”-13NC 256TD All 4.25 3.75 12.5 11.0 14 4 0.81 256TC All 4.25 3.75 7.250 8.5 10.00 4 1/2”-13NC 284TD 4,6 4.75 4.37 12.5 11.0 14 4 0.81 286TD 4,6 4.75 4.37 12.5 11.0 14 4 0.81 Dimensions in inches. Typical dimensions data, not guaranteed. *Not according to NEMA. 5-6 2014 Low Voltage AC Motors Selection and Pricing Guide Severe duty Frames 280-360 General Purpose Motors SD100 Introduction General dimensions Severe Duty Motors 2F N-W P U BA AB 2E D O R S ES 284TS 2 26.0 9.50 3.25 14.4 1.625 4.750 13.39 11.0 7.0 14.27 0.375 1.416 1.88 284TS 4,6 28.0 9.50 3.25 15.8 1.625 4.750 14.33 11.0 7.0 14.87 0.375 1.416 1.88 286TS 2 27.5 11.00 3.25 14.4 1.625 4.750 13.39 11.0 7.0 14.27 0.375 1.416 1.88 286TS 4,6 28.0 11.00 3.25 15.8 1.625 4.750 14.33 11.0 7.0 14.87 0.375 1.416 1.88 324T 4,6 32.1 10.50 5.25 17.7 2.125 5.250 15.99 12.5 8.0 16.66 0.500 1.845 3.88 326T 4,6 32.1 12.00 5.25 17.7 2.125 5.250 15.99 12.5 8.0 16.66 0.500 1.845 3.88 324TS 2 30.0 10.50 3.75 15.8 1.875 5.250 15.50 12.5 8.0 15.90 0.500 1.591 2.00 324TS 4,6 30.6 10.50 3.75 17.7 1.875 5.250 15.99 12.5 8.0 16.66 0.500 1.591 2.00 326TS 2 30.0 12.00 3.75 15.8 1.875 5.250 15.50 12.5 8.0 15.90 0.500 1.591 2.00 326TS 4,6 30.6 12.00 3.75 17.7 1.875 5.250 15.99 12.5 8.0 16.66 0.500 1.591 2.00 Frame Poles BA AH AJ AK BD BF # BF Frame Poles BA AH AJ AK BD BF # BF 284TC 4, 6 4.75 4.38 9 10.5 11.25 4 1/2”-13NC 284TSD 2 4.75 4.38 12.5 11.0 14.0 4 0.81 Special Features Detail C Definite Purpose Motors Poles Hazardous Duty Motors Keyseat Frame Options Selection and Pricing D-Flange 4,6 4.75 4.38 9 10.5 11.25 4 1/2”-13NC 284TSD 4,6 4.75 4.38 12.5 11.0 14.0 4 0.81 2 4.75 3.00 9 10.5 11.25 4 1/2”-13NC 286TSD 2 4.75 3.00 12.5 11.0 14.0 4 0.81 284TSC 4,6 4.75 3.00 9 10.5 11.25 4 1/2”-13NC 286TSD 4,6 4.75 3.00 12.5 11.0 14.0 4 0.81 286TSC 2 4.75 3.00 9 10.5 11.25 4 1/2”-13NC 324TD 4,6 5.25 5.00 16.0 14.0 18.0 4 0.81 286TSC 4, 6 4.75 3.00 9 10.5 11.25 4 1/2”-13NC 326TD 4,6 5.25 5.00 16.0 14.0 18.0 4 0.81 324TC 4, 6 5.25 5.00 11 12.5 14.00 4 5/8”-11NC 324TSD 2 5.25 5.00 16.0 14.0 18.0 4 0.81 326TC 4,6 5.25 5.00 11 12.5 14.00 4 5/8”-11NC 324TSD 4,6 5.25 5.00 16.0 14.0 18.0 4 0.81 324TSC 2 5.25 3.50 11 12.5 14.00 4 5/8”-11NC 326TSD 2 5.25 3.50 16.0 14.0 18.0 4 0.81 324TSC 4,6 5.25 3.50 11 12.5 14.00 4 5/8”-11NC 326TSD 4,6 5.25 3.50 16.0 14.0 18.0 4 0.81 2014 Low Voltage AC Motors Selection and Pricing Guide 5-7 Part Number Index Dimensions in inches. Typical dimensions data, not guaranteed. General Dimensions 286TC 284TSC Typical Performance Data C-Face General dimensions SD100 Severe Duty Frames 360-400 Keyseat Frame Poles C 2F N-W P U BA AB 2E D O R S ES 364T 4,6 35.5 11.25 5.88 19.6 2.375 5.880 18.57 14.0 9.0 18.48 2.021 0.625 4.25 365T 4,6 35.5 12.25 5.88 19.6 2.375 5.880 18.57 14.0 9.0 18.48 2.021 0.625 4.25 364TS 2 32.1 11.25 3.75 17.7 1.875 5.880 17.94 14.0 9.0 17.81 1.591 0.500 2.00 364TS 4,6 33.4 11.25 3.75 19.6 1.875 5.880 18.57 14.0 9.0 18.48 1.591 0.500 2.00 365TS 2 32.1 12.25 3.75 17.7 1.875 5.880 17.94 14.0 9.0 17.81 1.591 0.500 2.00 365TS 4,6 33.4 12.25 3.75 19.6 1.875 5.880 18.57 14.0 9.0 18.48 1.591 0.500 2.00 404T All 39.4 12.25 7.25 19.6 2.875 6.620 18.38 16.0 10.0 19.60 2.450 0.750 5.63 405T All 39.4 13.75 7.25 19.6 2.875 6.620 18.38 16.0 10.0 19.60 2.450 0.750 5.63 404TS All 36.4 12.25 4.25 19.6 2.125 6.620 18.38 16.0 10.0 19.60 1.845 0.500 2.75 405TS All 36.4 13.75 4.25 19.6 2.125 6.620 18.38 16.0 10.0 19.60 1.845 0.500 2.75 Frame Poles BA AH AJ AK BD BF # BF Frame Poles BA AH AJ AK BD BF # BF 326TSC 2 5.25 3.50 11 12.5 14.00 4 5/8”-11NC 364TD 4,6 5.88 5.63 16 14.0 18.00 4 0.81 C-Face D-Flange 326TSC 4,6 5.25 3.50 11 12.5 14.00 4 5/8”-11NC 365TD 4,6 5.88 5.63 16 14.0 18.00 4 0.81 364TC 4,6 5.88 5.63 11 12.5 12.75 8 5/8”-11NC 364TSD 2 5.88 3.50 16 14.0 18.00 4 0.81 365TC 4,6 5.88 5.63 11 12.5 12.75 8 5/8”-11NC 364TSD 4,6 5.88 3.50 16 14.0 18.00 4 0.81 364TSC 2 5.88 3.50 11 12.5 14.00 8 5/8”-11NC 365TSD 2 5.88 3.50 16 14.0 18.00 4 0.81 364TSC 4,6 5.88 3.50 11 12.5 12.75 8 5/8”-11NC 365TSD 4,6 5.88 3.50 16 14.0 18.00 4 0.81 365TSC 2 5.88 3.50 11 12.5 14.00 8 5/8”-11NC 404TD All 6.62 7.00 20 18.0 22.00 8 0.81 365TSC 4,6 5.88 3.50 11 12.5 12.75 8 5/8”-11NC 405TD All 6.62 7.00 20 18.0 22.00 8 0.81 404TC All 6.62 7.00 11 12.5 15.50 8 5/8”-11NC 404TSD All 6.62 4.00 20 18.0 22.00 8 0.81 405TC All 6.62 7.00 11 12.5 15.50 8 5/8”-11NC 405TSD All 6.62 4.00 20 18.0 22.00 8 0.81 404TSC All 6.62 4.00 11 12.5 15.50 8 5/8”-11NC Dimensions in inches. Typical dimensions data, not guaranteed. 5-8 2014 Low Voltage AC Motors Selection and Pricing Guide Severe duty Frames 400-S440 General Purpose Motors SD100 Introduction General dimensions Severe Duty Motors Poles C 2F N-W P U BA AB 2E D O R S ES 444T All 45.6 14.50 8.50 21.8 3.375 7.500 19.63 18.0 11.0 21.80 2.880 0.875 6.88 45.6 16.50 8.50 21.8 3.375 7.500 19.63 18.0 11.0 21.80 2.880 0.875 6.88 All 41.8 14.50 4.75 21.8 2.375 7.500 19.63 18.0 11.0 21.80 2.021 0.625 3.05 445TS All 41.8 16.50 4.75 21.8 2.375 7.500 19.63 18.0 11.0 21.80 2.021 0.625 3.05 447T All 49.0 20.00 8.50 21.8 3.375 7.500 19.63 18.0 11.0 22.00 2.880 0.875 6.88 447TS All 45.3 20.00 4.75 21.8 2.375 7.500 19.63 18.0 11.0 22.00 2.021 0.625 3.05 449T All 54.0 25.00 8.50 21.8 3.375 7.500 22.00 18.0 11.0 22.00 2.880 0.875 6.88 449TS All 50.3 25.00 4.75 21.8 2.375 7.500 22.00 18.0 11.0 22.00 2.021 0.625 3.05 S449LS All 63.6 25.00 9.12 24.6 3.625 7.500 23.00 18.0 11.0 23.30 3.134 0.875 7.50 S449SS All 59.8 25.00 5.25 24.6 2.625 7.500 23.00 18.0 11.0 23.30 2.275 0.625 3.50 S449SS 2 1) 63.2 25.00 5.25 24.6 2.625 7.500 23.00 18.0 11.0 23.30 2.275 0.625 3.50 Special Features Detail All Definite Purpose Motors 445T 444TS Hazardous Duty Motors Keyseat Frame Options Selection and Pricing Poles BA AH AJ AK BD BF # BF Frame Poles BA AH AJ AK BD BF # BF 405TSC All 6.62 4.00 11 12.5 15.50 8 5/8”-11NC 444TD All 7.5 8.50 20 18.0 22.0 8 0.81 444TC All 7.50 8.25 14 16.0 18.00 8 5/8”-11NC 445TD All 7.5 8.50 20 18.0 22.0 8 0.81 445TC All 7.50 8.25 14 16.0 18.00 8 5/8”-11NC 444TSD All 7.5 4.75 20 18.0 22.0 8 0.81 444TSC All 7.50 4.50 14 16.0 18.00 8 5/8”-11NC 445TSD All 7.5 4.75 20 18.0 22.0 8 0.81 445TSC All 7.50 4.50 14 16.0 18.00 8 5/8”-11NC 447TD All 7.5 8.50 20 18.0 22.0 8 0.81 All 7.50 8.25 14 16.0 18.00 8 5/8”-11NC 447TSD All 7.5 4.75 20 18.0 22.0 8 0.81 All 7.50 4.50 14 16.0 18.00 8 5/8”-11NC 449TD All 7.5 8.50 20 18.0 22.0 8 0.81 449TC All 7.50 8.25 14 16.0 18.00 8 5/8”-11NC 449TSD All 7.5 4.75 20 18.0 22.0 8 0.81 449TSC All 7.50 4.50 14 16.0 18.00 8 5/8”-11NC S449LSD All 7.5 8.50 20 18.0 22.0 8 0.81 S449LSC All 7.50 8.25 14 16.0 18.00 8 5/8”-11NC S449SSD All 7.5 4.75 20 18.0 22.0 8 0.81 S449SSC All 7.50 4.50 14 16.0 18.00 8 5/8”-11NC Typical dimensions data, not guaranteed. 2014 Low Voltage AC Motors Selection and Pricing Guide 5-9 Part Number Index 1) Only for 400HP . Dimensions in inches. General Dimensions 447TC 447TSC Typical Performance Data D-Flange C-Face Frame General dimensions SD100 IEEE841 Severe duty Frames 140-250 AC Keyseat Frame Poles C 2F N-W P U BA AB 2E D O R S ES 143T 2,4,6,8 14.0 4.00 1.77 8.1 0.875 2.73 7.050 5.5 3.50 7.42 0.771 0.188 1.41 145T 2,4,6,8 14.0 5.00 1.77 8.1 0.875 2.73 7.050 5.5 3.50 7.42 0.771 0.188 1.41 182T 2,8 14.8 4.50 2.46 9.0 1.125 3.03 8.000 7.5 4.50 9.00 0.986 0.250 1.78 182T 4,6 16.2 4.50 2.46 10.8 1.125 3.03 8.580 7.5 4.50 9.74 0.986 0.250 1.78 184T 2,8 15.9 5.50 2.46 9.0 1.125 3.03 8.000 7.5 4.50 9.00 0.986 0.250 1.78 184T 4,6 16.2 5.50 2.46 10.8 1.125 3.03 8.580 7.5 4.50 9.74 0.986 0.250 1.78 213T 2,8 18.2 5.50 2.88 10.6 1.375 4.00 9.400 8.5 5.25 10.43 1.201 0.312 2.41 213T 4,6 20.3 5.50 2.85 12.2 1.375 4.03 10.630 8.5 5.25 11.35 1.201 0.312 2.41 215T 2,8 19.7 7.00 2.88 10.6 1.375 4.00 9.400 8.5 5.25 10.43 1.201 0.312 2.41 215T 4,6 20.3 7.00 2.85 12.2 1.375 4.03 10.630 8.5 5.25 11.35 1.201 0.312 2.41 254T 2,8 23.2 8.25 3.55 12.7 1.625 4.70 10.650 10.0 6.25 12.33 1.416 0.375 2.91 Frame Poles BA* AH AJ AK BD BF # BF Frame Poles BA* AH AJ AK BD BF # BF 143TC 2,4,6 2.38 2.12 5.875 4.5 6.50 4 3/8”-16NC 143TD 2,4,6 2.38 2.25 10.0 9.0 11.0 4 0.53 145TC 2,4,6 2.38 2.12 5.875 4.5 6.50 4 3/8”-16NC 145TD 2,4,6 2.38 2.25 10.0 9.0 11.0 4 0.53 182TC 2 2.87 2.62 7.250 8.5 9.00 4 1/2”-13NC 182TD 2 2.87 2.75 10.0 9.0 11.0 4 0.53 182TC 4,6 2.87 2.62 7.250 8.5 9.00 4 1/2”-13NC 182TD 4,6 2.87 2.75 10.0 9.0 11.0 4 0.53 182TCH 2 2.87 2.62 5.875 4.5 6.50 4 1/2”-13NC 184TD 2 2.87 2.75 10.0 9.0 11.0 4 0.53 182TCH 4,6 2.87 2.62 5.875 4.5 6.50 4 1/2”-13NC 184TD 4,6 2.87 2.75 10.0 9.0 11.0 4 0.53 184TC 2 2.87 2.62 7.250 8.5 9.00 4 1/2”-13NC 213TD 2 3.72 3.32 10.0 9.0 11.0 4 0.53 184TC 4,6 2.87 2.62 7.250 8.5 9.00 4 1/2”-13NC 213TD 4,6 3.72 3.32 10.0 9.0 11.0 4 0.53 184TCH 2 2.87 2.62 5.875 4.5 6.50 4 1/2”-13NC 215TD 2 3.72 3.32 10.0 9.0 11.0 4 0.53 184TCH 4,6 2.87 2.62 5.875 4.5 6.50 4 1/2”-13NC 215TD 4,6 3.72 3.32 10.0 9.0 11.0 4 0.53 213TC 2 3.72 3.12 7.250 8.5 9.00 4 1/2”-13NC 254TD 2 4.42 4.00 12.5 11.0 14.0 4 0.81 213TC 4,6 3.72 3.12 7.250 8.5 9.00 4 1/2”-13NC C-Face D-Flange Dimensions in inches. Typical dimensions data, not guaranteed. 5-10 2014 Low Voltage AC Motors Selection and Pricing Guide *Not according to NEMA. Severe duty Frames 250-280 General Purpose Motors SD100 IEEE841 Introduction General dimensions Severe Duty Motors N-W P U BA AB 2E D O R S ES 254T 4,6 25.8 8.25 3.47 14.4 1.625 4.78 11.620 10.0 6.25 13.34 1.416 0.375 2.91 256T 2,8 24.9 10.00 3.55 12.7 1.625 4.70 10.650 10.0 6.25 12.33 1.416 0.375 2.91 256T 4,6 25.8 10.00 3.47 14.4 1.625 4.78 11.620 10.0 6.25 13.34 1.416 0.375 2.91 284T 8 27.4 9.50 4.17 14.4 1.875 5.20 13.390 11.0 7.00 14.27 1.591 0.500 3.25 284T 4,6 29.4 9.50 4.09 15.8 1.875 5.29 14.300 11.0 7.00 14.87 1.591 0.500 3.25 286T 8 28.9 11.00 4.17 14.4 1.875 5.20 13.390 11.0 7.00 14.27 1.591 0.500 3.25 286T 4,6 29.4 11.00 4.09 15.8 1.875 5.29 14.300 11.0 7.00 14.87 1.591 0.500 3.25 284TS 2,8 26.0 9.50 2.80 14.4 1.625 5.20 13.390 11.0 7.00 14.27 1.416 0.375 1.88 284TS 4,6 28.0 9.50 2.72 15.8 1.625 5.28 14.330 11.0 7.00 14.87 1.416 0.375 1.88 286TS 2,8 27.5 11.00 2.80 14.4 1.625 5.20 13.390 11.0 7.00 14.27 1.416 0.375 1.88 286TS 4,6 28.0 11.00 2.72 15.8 1.625 5.28 14.330 11.0 7.00 14.87 1.416 0.375 1.88 Frame Poles BA* AH AJ AK BD BF # BF Frame Poles BA* AH AJ AK BD BF # BF 215TC 2 3.72 3.12 7.25 8.5 9.00 4 1/2”-13NC 254TD 4,6 4.42 4.00 12.5 11.0 14.0 4 0.81 215TC 4,6 3.72 3.12 7.25 8.5 9.00 4 1/2”-13NC 256TD 2 4.42 4.00 12.5 11.0 14.0 4 0.81 254TC 2 4.42 3.75 7.25 8.5 10.00 4 1/2”-13NC 256TD 4,6 4.42 4.00 12.5 11.0 14.0 4 0.81 254TC 4,6 4.42 3.75 7.25 8.5 10.00 4 1/2”-13NC 284TD 4,6 5.29 4.62 12.5 11.0 14.0 4 0.81 256TC 2 4.42 3.75 7.25 8.5 10.00 4 1/2”-13NC 284TD 4,6 5.29 4.62 12.5 11.0 14.0 4 0.81 256TC 4,6 4.42 3.75 7.25 8.5 10.00 4 1/2”-13NC 286TD 4,6 5.29 4.62 12.5 11.0 14.0 4 0.81 284TC 4,6 5.29 4.38 9.00 10.5 11.25 4 1/2”-13NC 286TD 4,6 5.29 4.62 12.5 11.0 14.0 4 0.81 284TC 4,6 5.29 4.38 9.00 10.5 11.25 4 1/2”-13NC 284TSD 2 5.29 3.25 12.5 11.0 14.0 4 0.81 286TC 4,6 5.29 4.38 9.00 10.5 11.25 4 1/2”-13NC 284TSD 4,6 5.29 3.25 12.5 11.0 14.0 4 0.81 286TC 4,6 5.29 4.38 9.00 10.5 11.25 4 1/2”-13NC 286TSD 2 5.29 3.25 12.5 11.0 14.0 4 0.81 284TSC 2 5.29 3.00 9.00 10.5 11.25 4 1/2”-13NC 286TSD 4,6 5.29 3.25 12.5 11.0 14.0 4 0.81 284TSC 4,6 5.29 3.00 9.00 10.5 11.25 4 1/2”-13NC Options Selection and Pricing 2F Special Features Detail C Definite Purpose Motors Poles Hazardous Duty Motors Keyseat Frame 2014 Low Voltage AC Motors Selection and Pricing Guide 5-11 Part Number Index *Not according to NEMA. General Dimensions Dimensions in inches. Typical dimensions data, not guaranteed. Typical Performance Data D-Flange C-Face General dimensions SD100 IEEE841 Severe duty Frames 280-360 Keyseat Frame Poles C 2F N-W P U BA AB 2E D O R S ES 324T 8 31.5 10.50 4.75 15.8 2.125 5.75 15.500 12.5 8.0 15.90 1.845 0.500 3.88 324T 4,6 32.1 10.50 4.69 17.7 2.125 5.80 15.990 12.5 8.0 16.66 1.845 0.500 3.88 326T 8 31.5 12.00 4.75 15.8 2.125 5.75 15.500 12.5 8.0 15.90 1.845 0.500 3.88 326T 4,6 32.1 12.00 4.69 17.7 2.125 5.80 15.990 12.5 8.0 16.66 1.845 0.500 3.88 324TS 2 30.0 10.50 3.25 15.8 1.875 5.75 15.500 12.5 8.0 15.90 1.591 0.500 2.00 324TS 4,6 30.6 10.50 3.25 17.7 1.875 5.75 15.990 12.5 8.0 16.66 1.591 0.500 2.00 326TS 2 30.0 12.00 3.25 15.8 1.875 5.75 15.500 12.5 8.0 15.90 1.591 0.500 2.00 326TS 4,6 30.6 12.00 3.25 17.7 1.875 5.75 15.990 12.5 8.0 16.66 1.591 0.500 2.00 364T 8 34.2 11.25 5.44 17.7 2.375 6.31 17.940 14.0 9.0 17.81 2.021 0.625 4.25 364T 4,6 35.5 11.25 5.40 19.6 2.375 6.35 18.570 14.0 9.0 18.48 2.021 0.625 4.25 365T 8 34.2 12.25 5.44 17.7 2.375 6.31 17.940 14.0 9.0 17.81 2.021 0.625 4.25 C-Face D-Flange Frame Pole BA* AH AJ AK BD BF # BF Frame Poles BA* AH AJ AK BD BF # BF 286TSC 2 5.29 3.00 9 10.5 11.25 4 1/2”-13NC 324TD 4,6 6.25 5.25 16 14.0 18.0 4 0.81 286TSC 4,6 5.29 3.00 9 10.5 11.25 4 1/2”-13NC 324TD 4,6 6.25 5.25 16 14.0 18.0 4 0.81 324TC 4,6 5.8 5.00 11 12.5 14.00 4 5/8”-11NC 326TD 4,6 6.25 5.25 16 14.0 18.0 4 0.81 324TC 4,6 5.8 5.00 11 12.5 14.00 4 5/8”-11NC 326TD 4,6 6.25 5.25 16 14.0 18.0 4 0.81 326TC 4,6 5.8 5.00 11 12.5 14.00 4 5/8”-11NC 324TSD 2 6.25 3.75 16 14.0 18.0 4 0.81 326TC 4,6 5.8 5.00 11 12.5 14.00 4 5/8”-11NC 324TSD 4,6 6.25 3.75 16 14.0 18.0 4 0.81 324TSC 2 5.75 3.50 11 12.5 14.00 4 5/8”-11NC 326TSD 2 6.25 3.75 16 14.0 18.0 4 0.81 324TSC 4,6 5.75 3.50 11 12.5 14.00 4 5/8”-11NC 326TSD 4,6 6.25 3.75 16 14.0 18.0 4 0.81 326TSC 2 5.75 3.50 11 12.5 14.00 4 5/8”-11NC 364TD 8 6.75 5.88 16 14.0 18.0 4 0.81 326TSC 4,6 5.75 3.50 11 12.5 14.00 4 5/8”-11NC 364TD 4,6 6.75 5.88 16 14.0 18.0 4 0.81 364TC 4,6 6.35 5.63 11 12.5 12.75 8 5/8”-11NC 365TD 4,6 6.75 5.88 16 14.0 18.0 4 0.81 365T 4,6 6.35 5.63 11 12.5 12.75 8 5/8”-11NC Dimensions in inches. Typical dimensions data, not guaranteed. 5-12 2014 Low Voltage AC Motors Selection and Pricing Guide *Not according to NEMA. Severe duty Frames 360-440 General Purpose Motors SD100 IEEE841 Introduction General dimensions Severe Duty Motors Poles C 2F N-W P U BA AB 2E D O R S ES 365T 4,6 35.5 12.25 5.40 19.6 2.375 6.35 18.570 14.0 9.0 18.48 2.021 0.625 4.25 364TS 2 32.1 11.25 3.31 17.7 1.875 6.31 17.940 14.0 9.0 17.81 1.591 0.500 2.00 364TS 4,6 33.4 11.25 3.28 19.6 1.875 6.35 18.570 14.0 9.0 18.48 1.591 0.500 2.00 2 32.1 12.25 3.31 17.7 1.875 6.31 17.940 14.0 9.0 17.81 1.591 0.500 2.00 4,6 33.4 12.25 3.28 19.6 1.875 6.35 18.570 14.0 9.0 18.48 1.591 0.500 2.00 404T All 39.4 12.25 6.78 19.6 2.875 7.10 18.380 16.0 10.0 19.60 2.450 0.750 5.63 405T All 39.4 13.75 6.78 19.6 2.875 7.10 18.380 16.0 10.0 19.60 2.450 0.750 5.63 404TS All 36.4 12.25 3.50 19.6 2.125 7.38 18.380 16.0 10.0 19.60 1.845 0.500 2.75 405TS All 36.4 13.75 3.50 19.6 2.125 7.38 18.380 16.0 10.0 19.60 1.845 0.500 2.75 45.6 14.50 8.10 21.8 3.375 7.90 19.630 18.0 11.0 21.80 2.880 0.875 6.88 45.6 16.50 8.10 21.8 3.375 7.90 19.630 18.0 11.0 21.80 2.880 0.875 6.88 Frame 365TC 365TC 364TSC 364TSC 365TSC 365TSC 404TC 405TC 404TSC 405TSC 444TC 445TC Poles 4,6 4,6 2 4,6 2 4,6 All All All All All All Options Selection and Pricing All All Special Features Detail 444T 445T Definite Purpose Motors 365TS 365TS Hazardous Duty Motors Keyseat Frame AJ 11 11 11 11 11 11 11 11 11 11 14 14 C-Face AK 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 16.0 16.0 BF # 8 8 8 8 8 8 8 8 8 8 8 8 BF 5/8”-11NC 5/8”-11NC 5/8”-11NC 5/8”-11NC 5/8”-11NC 5/8”-11NC 5/8”-11NC 5/8”-11NC 5/8”-11NC 5/8”-11NC 5/8”-11NC 5/8”-11NC Frame 365TD 364TSD 364TSD 365TSD 365TSD 404TD 405TD 404TSD 405TSD Poles 4,6 2 4,6 2 4,6 All All All All BA* 6.75 6.75 6.75 6.75 6.75 7.07 7.07 7.38 7.38 AH 5.88 3.75 3.75 3.75 3.75 7.25 7.25 4.25 4.25 D-Flange AJ AK 16 14.0 16 14.0 16 14.0 16 14.0 16 14.0 20 18.0 20 18.0 20 18.0 20 18.0 BD 18.0 18.0 18.0 18.0 18.0 22.0 22.0 22.0 22.0 BF # 4 4 4 4 4 8 8 8 8 BF 0.81 0.81 0.81 0.81 0.81 0.81 0.81 0.81 0.81 444TD 445TD All All 8.38 8.38 8.50 8.50 20 20 22.0 22.0 8 8 0.81 0.81 18.0 18.0 *Not according to NEMA. 2014 Low Voltage AC Motors Selection and Pricing Guide 5-13 Part Number Index Dimensions in inches. Typical dimensions data, not guaranteed. BD 12.75 12.75 14.00 12.75 14.00 12.75 15.50 15.50 15.50 15.50 18.00 18.00 General Dimensions AH 5.63 5.63 3.50 3.50 3.50 3.50 7.00 7.00 4.00 4.00 8.25 8.25 Typical Performance Data BA* 6.35 6.35 6.31 6.35 6.31 6.35 7.10 7.10 7.38 7.38 7.90 7.90 General dimensions SD100 IEEE841 Severe duty Frames 440-S440 Keyseat Frame C 2F N-W P U BA AB 2E D O R S ES 444TS 41.8 14.50 4.00 21.8 2.375 8.25 19.630 18.0 11.0 21.80 2.021 0.625 3.05 445TS 41.8 16.50 4.00 21.8 2.375 8.25 19.630 18.0 11.0 21.80 2.021 0.625 3.05 447T 49.0 20.00 8.03 21.8 3.375 7.96 19.630 18.0 11.0 22.00 2.880 0.875 6.88 447TS 45.3 20.00 4.00 21.8 2.375 8.25 19.630 18.0 11.0 22.00 2.021 0.625 3.05 449T 54.0 25.00 8.03 21.8 3.375 7.96 22.000 18.0 11.0 22.00 2.880 0.875 6.88 449TS 50.3 25.00 4.00 21.8 2.375 8.25 22.000 18.0 11.0 22.00 2.021 0.625 3.05 S449LS 63.6 25.00 8.67 24.6 3.625 7.95 23.000 18.0 11.0 23.30 3.134 0.875 7.50 66.7 25.00 8.67 24.6 3.625 7.95 23.000 18.0 11.0 23.30 3.134 0.875 7.50 59.8 25.00 4.59 24.6 2.625 8.16 23.000 18.0 11.0 23.30 2.275 0.625 3.50 63.2 25.00 4.59 24.6 2.625 8.16 23.000 18.0 11.0 23.30 2.275 0.625 3.50 BA* AH D-Flange AJ AK 8.38 4.75 20 S449LS Poles 4 1) S449SS S449SS Frame 2 1) Poles 444TSC BA* AH AJ C-Face AK 8.25 4.50 14 16.0 BD BF # BF Frame 18.0 8 5/8”-11NC 444TSD Poles 18.0 BD BF # BF 22.0 8 0.81 445TSC 8.25 4.50 14 16.0 18.0 8 5/8”-11NC 445TSD 8.38 4.75 20 18.0 22.0 8 0.81 447TC 7.96 8.25 14 16.0 18.0 8 5/8”-11NC 447TD 8.38 8.5 20 18.0 22.0 8 0.81 447TSC 8.25 4.50 14 16.0 18.0 8 5/8”-11NC 447TSD 8.38 4.75 20 18.0 22.0 8 0.81 449TC 7.96 8.25 14 16.0 18.0 8 5/8”-11NC 449TD 8.38 8.5 20 18.0 22.0 8 0.81 449TSC 8.25 4.50 14 16.0 18.0 8 5/8”-11NC 449TSD 8.38 4.75 20 18.0 22.0 8 0.81 S449LS 7.95 8.25 14 16.0 18.0 8 5/8”-11NC S449LS 7.95 7.95 20 18.0 22.0 8 0.81 7.95 8.25 14 16.0 18.0 8 5/8”-11NC S449LS 7.95 7.95 20 18.0 22.0 8 0.81 8.16 8.16 20 18.0 22.0 8 0.81 8.16 8.16 20 18.0 22.0 8 0.81 S449LS 4 2) S449SS S449SS 2 1) 8.16 4.50 14 16.0 18.0 8 5/8”-11NC S449SS 8.16 4.50 14 16.0 18.0 8 5/8”-11NC S449SS 1) Only for 400HP. 2) Only for 300, 350 and 400HP. Dimensions in inches. 5-14 2014 Low Voltage AC Motors Selection and Pricing Guide 2 1) 4 2) Typical dimensions data, not guaranteed. * Not according to NEMA. Explosion proof Frames 140-250 General Purpose Motors XP100 / XP100 ID1 Introduction General dimensions Severe Duty Motors 2F N-W P U BA AB 2E D O R S ES 143T All 15.27 4.00 2.25 8.2 0.875 2.25 8.75 5.5 3.50 9.19 0.771 0.188 1.42 145T All 15.27 5.00 2.25 8.2 0.875 2.25 8.75 5.5 3.50 9.19 0.771 0.188 1.42 182T All 16.87 4.50 2.75 9.6 1.125 2.75 9.30 7.5 4.50 9.34 0.990 0.250 1.78 184T All 16.87 5.50 2.75 9.6 1.125 2.75 9.30 7.5 4.50 9.34 0.986 0.250 1.78 213T All 19.97 5.50 3.38 10.7 1.375 3.50 10.54 8.5 5.25 10.68 1.201 0.312 2.44 215T All 19.97 7.00 3.38 10.7 1.375 3.50 10.54 8.5 5.25 10.68 1.201 0.312 2.44 254T All 25.77 8.25 4.00 12.9 1.625 4.25 11.52 10.0 6.25 12.67 1.416 0.375 2.91 256T All 25.77 10.00 4.00 12.9 1.625 4.25 11.52 10.0 6.25 12.67 1.416 0.375 2.91 Frame Poles BA* AH AJ AK BD BF # BF 143TC All 2.25 2.12 4.500 5.875 6.600 4 3/8-16NC 145TC All 2.25 2.12 4.500 5.875 6.600 4 3/8-16NC 182TC All 2.75 2.62 8.500 7.250 8.900 4 1/2-13NC 184TC All 2.75 2.62 8.500 7.250 8.900 4 1/2-13NC 213TC All 3.50 3.12 8.500 7.250 8.900 4 1/2-13NC 215TC All 3.50 3.12 8.500 7.250 8.900 4 1/2-13NC 254TC All 4.23 3.75 8.500 7.250 9.290 4 1/2-13NC 256TC All 4.25 3.75 8.500 7.250 9.290 4 1/2-13NC Special Features Detail C Definite Purpose Motors Poles Hazardous Duty Motors Keyseat Frame Options Selection and Pricing C-Face Typical Performance Data General Dimensions 2014 Low Voltage AC Motors Selection and Pricing Guide 5-15 Part Number Index Dimensions in inches. Typical dimensions data, not guaranteed. * Not according to NEMA. General dimensions XP100 / XP100 ID1 Explosion proof Frames 280-320 Keyseat Frame Poles C 2F N-W P U BA AB 2E D O R S ES 284T All 29.40 9.50 4.62 15.8 1.875 4.75 12.85 11.0 7 14.85 1.590 0.500 3.28 286T All 29.40 11.0 4.62 15.8 1.875 4.75 12.85 11.0 7 14.85 1.590 0.500 3.28 284TS All 28.03 9.50 3.25 15.8 1.625 4.75 12.85 11.0 7 14.85 1.420 0.375 1.91 286TS All 28.03 11.0 3.25 15.8 1.625 4.75 12.85 11.0 7 14.85 1.420 0.375 1.91 324T All 32.08 10.5 5.25 17.7 2.120 5.25 17.35 12.5 8 16.69 1.845 0.500 3.91 326T All 32.08 12.0 5.25 17.7 2.120 5.25 17.35 12.5 8 16.69 1.845 0.500 3.91 324TS All 30.58 10.5 3.75 17.7 1.870 5.25 17.35 12.5 8 16.69 1.591 0.500 2.03 326TS All 30.58 12.0 3.75 17.7 1.870 5.25 17.35 12.5 8 16.69 1.591 0.500 2.03 D-Flange C-Face Frame Poles BA AH AJ AK BD BF # BF Frame Poles BA AH AJ AK BD BF # BF 284T All 4.75 4.38 9 10.5 11.25 4 1/2”-13NC 284TD All 4.75 4.38 12.5 11.0 13.88 4 0.81 286T All 4.75 4.38 9 10.5 11.25 4 1/2”-13NC 286TD All 4.75 4.38 12.5 11.0 13.88 4 0.81 284TS All 4.75 3.00 9 10.5 11.25 4 1/2”-13NC 284TSD All 4.75 3.00 12.5 11.0 13.88 4 0.81 286TS All 4.75 3.00 9 10.5 11.25 4 1/2”-13NC 286TSD All 4.75 3.00 12.5 11.0 13.88 4 0.81 324T All 5.25 5.00 11 12.5 14.00 4 5/8”-11NC 324TD All 5.25 5.00 16.0 14.0 17.87 4 0.81 326T All 5.25 5.00 11 12.5 14.00 4 5/8”-11NC 326TD All 5.25 5.00 16.0 14.0 17.87 4 0.81 324TS All 5.25 3.50 11 12.5 14.00 4 5/8”-11NC 324TSD All 5.25 3.50 16.0 14.0 17.87 4 0.81 326TS All 5.25 3.50 11 12.5 14.00 4 5/8”-11NC 326TSD All 5.25 3.50 16.0 14.0 17.87 4 0.81 Dimensions in inches. Typical dimensions data, not guaranteed. 5-16 2014 Low Voltage AC Motors Selection and Pricing Guide Explosion proof Frames 360-400 General Purpose Motors XP100 / XP100 ID1 Introduction General dimensions Severe Duty Motors Poles C 2F N-W P U BA AB 2E D O R S ES 364T All 35.28 11.25 5.87 19.6 2.370 5.88 18.18 14 9 18.65 2.020 0.625 4.28 All 35.28 12.25 5.87 19.6 2.370 5.88 18.18 14 9 18.65 2.020 0.625 4.28 All 33.16 11.25 3.75 19.6 1.875 5.88 18.18 14 9 18.65 1.590 0.500 2.03 365TS All 33.16 12.25 3.75 19.6 1.875 5.88 18.18 14 9 18.65 1.590 0.500 2.03 404T All 39.52 12.25 7.25 19.6 2.870 6.62 20.34 16 10 19.61 2.450 0.750 5.65 All 39.52 13.75 7.25 19.6 2.870 6.62 20.34 16 10 19.61 2.450 0.750 5.65 All 36.52 12.25 4.25 19.6 2.120 6.62 20.34 16 10 19.61 1.845 0.500 2.78 405TS All 36.52 13.75 4.25 19.6 2.120 6.62 20.34 16 10 19.61 1.845 0.500 2.78 Frame Poles BA* AH AJ AK BD BF # BF Frame Poles BA* AH AJ AK BD BF # BF 364TC All 6.62 5.62 11 12.5 14.00 8 5/8”-11NC 364TD All 6.62 5.62 16.0 14.0 18.0 4 0.81 Special Features Detail 405T 404TS Definite Purpose Motors 365T 364TS Hazardous Duty Motors Keyseat Frame Options Selection and Pricing D-Flange C-Face 6.62 5.62 11 12.5 14.00 8 5/8”-11NC 365TD All 6.62 5.62 16.0 14.0 18.0 4 0.81 All 6.62 3.50 11 12.5 14.00 8 5/8”-11NC 364TSD All 6.62 3.50 16.0 14.0 18.0 4 0.81 365TSC All 6.62 3.50 11 12.5 14.00 8 5/8”-11NC 365TSD All 6.62 3.50 16.0 14.0 18.0 4 0.81 404TC All 6.62 7.00 11 12.5 15.50 8 5/8”-11NC 404TD All 6.62 7.00 16.0 14.0 22.0 8 0.81 405TC All 6.62 7.00 11 12.5 15.50 8 5/8”-11NC 405TD All 6.62 7.00 16.0 14.0 22.0 8 0.81 404TSC All 6.62 4.00 11 12.5 15.50 8 5/8”-11NC 404TSD All 6.62 4.00 16.0 14.0 22.0 8 0.81 405TSC All 6.62 4.00 11 12.5 15.50 8 5/8”-11NC 405TSD All 6.62 4.00 16.0 14.0 22.0 8 0.81 2014 Low Voltage AC Motors Selection and Pricing Guide 5-17 Part Number Index Dimensions in inches. Typical dimensions data, not guaranteed. * Not according to NEMA. General Dimensions All Typical Performance Data 365TC 364TSC General dimensions XP100 / XP100 ID1 Explosion proof Frames 440 Keyseat Frame Poles C 2F N-W P U BA AB 2E D O R S ES 444T All 45.58 14.5 8.50 21.7 3.37 7.5 21.59 18 11 21.98 2.880 0.875 6.910 445T All 45.58 16.5 8.50 21.7 3.37 7.5 21.59 18 11 21.98 2.880 0.875 6.910 444TS All 41.83 14.5 4.75 21.7 2.37 7.5 21.59 18 11 21.98 2.020 0.625 3.030 445TS All 41.83 16.5 4.75 21.7 2.37 7.5 21.59 18 11 21.98 2.021 0.625 3.030 447T All 49.08 20.0 8.50 21.7 3.37 7.5 21.59 18 11 21.98 2.880 0.875 6.910 447TS All 45.33 20.0 4.75 21.7 2.37 7.5 21.59 18 11 21.98 2.021 0.625 3.030 449T All 54.08 25.0 8.50 21.7 3.37 7.5 23.46 18 11 21.98 2.880 0.875 6.912 449TS All 50.33 25.0 4.75 21.7 2.37 7.5 23.46 18 11 21.98 2.021 0.875 3.030 C-Face D-Flange Frame Poles BA AH AJ AK BD BF # BF Frame Poles BA AH AJ AK BD BF # BF 444TC All 7.5 8.25 14 16.0 18.0 8 5/8”-11NC 444TD All 7.5 8.25 14.0 18.0 22.0 8 0.81 445TC All 7.5 8.25 14 16.0 18.0 8 5/8”-11NC 445TD All 7.5 8.25 14.0 18.0 22.0 8 0.81 444TSC All 7.5 4.50 14 16.0 18.0 8 5/8”-11NC 444TSD All 7.5 4.50 14.0 18.0 22.0 8 0.81 445TSC All 7.5 4.50 14 16.0 18.0 8 5/8”-11NC 445TSD All 7.5 4.50 14.0 18.0 22.0 8 0.81 447TC All 7.5 8.25 14 16.0 18.0 8 5/8”-11NC 447TD All 7.5 8.25 14.0 18.0 22.0 8 0.81 447TSC All 7.5 4.50 14 16.0 18.0 8 5/8”-11NC 447TSD All 7.5 4.50 14.0 18.0 22.0 8 0.81 449TC All 7.5 8.25 14 16.0 18.0 8 5/8”-11NC 449TD All 7.5 8.25 14.0 18.0 22.0 8 0.81 449TSC All 7.5 4.50 14 16.0 18.0 8 5/8”-11NC 449TSD All 7.5 4.50 14.0 18.0 22.0 8 0.81 Dimensions in inches. Typical dimensions data, not guaranteed. 5-18 2014 Low Voltage AC Motors Selection and Pricing Guide Definite purpose Frames 140-250 General Purpose Motors SD10 MS Introduction General dimensions Severe Duty Motors 2F N-W P U BA AB 2E D O R S ES 143T All 14.37 4.0 2.25 7.6 0.875 2.25 7.00 5.5 3.50 7.28 0.771 0.188 1.41 145T All 14.37 5.0 2.25 7.6 0.875 2.25 7.00 5.5 3.50 7.28 0.771 0.188 1.41 182T All 16.68 4.5 2.75 8.7 1.125 2.75 6.94 7.5 4.50 8.87 0.986 0.250 1.81 184T All 16.68 5.5 2.75 8.7 1.125 2.75 6.94 7.5 4.50 8.87 0.986 0.250 1.81 213T All 20.65 5.5 3.38 10.3 1.375 3.5 8.27 8.5 5.25 10.41 1.201 0.312 2.44 215T All 20.65 7.0 3.38 10.3 1.375 3.5 8.27 8.5 5.25 10.41 1.201 0.312 2.44 254T All 26.16 8.25 4.00 12.4 1.625 4.25 9.35 10.0 6.25 12.43 1.416 0.375 2.91 256T All 26.16 10.0 4.00 12.4 1.625 4.25 9.35 10.0 6.25 12.43 1.416 0.375 2.91 Frame Poles BA* AH AJ AK BD BF # BF Frame Poles BA* AH AJ AK BD BF # BF 143TC All 2.25 2.12 5.875 4.5 6.60 4 3/8”-16NC 143TD All 2.25 2.25 10 9.0 10.90 4 0.53 145TC All 2.25 2.12 5.875 4.5 6.60 4 3/8”-16NC 145TD All 2.25 2.25 10 9.0 10.90 4 0.53 182TC All 2.75 2.62 7.250 8.5 * 8.90 4 1/2”-13NC 182TD All 2.75 2.75 10 9.0 11.00 4 0.53 184TC All 2.75 2.62 7.250 8.5 * 8.90 4 1/2”-13NC 184TD All 2.75 2.75 10 9.0 11.00 4 0.53 213TC All 3.50 3.12 7.250 8.5 8.90 4 1/2”-13NC 213TD All 3.50 3.38 10 9.0 10.90 4 0.53 215TC All 3.50 3.12 7.250 8.5 8.90 4 1/2”-13NC 215TD All 3.50 3.38 10 9.0 10.90 4 0.53 254TC All 4.25 3.75 7.250 8.5 9.30 4 1/2”-13NC 254TD All 4.25 4.00 12.5 11.0 13.90 4 0.81 256TC All 4.25 3.75 7.250 8.5 9.30 4 1/2”-13NC 256TD All 4.25 4.00 12.5 11.0 13.90 4 0.81 Special Features Detail C Definite Purpose Motors Poles Hazardous Duty Motors Keyseat Frame Options Selection and Pricing D-Flange 5-19 Part Number Index 2014 Low Voltage AC Motors Selection and Pricing Guide General Dimensions Dimensions in inches. Typical dimensions data, not guaranteed. * Not according to NEMA. Typical Performance Data C-Face General dimensions SD10 MS Definite purpose Frames 280-320 Keyseat Frame Poles C 2F N-W P U AB BA 2E D O R S ES 284T All 27.4 9.50 4.63 15.5 1.875 13.40 4.75 11.0 7.0 14.19 1.590 0.500 3.25 286T All 28.9 11.00 4.63 15.5 1.875 13.40 4.75 11.0 7.0 14.19 1.590 0.500 3.25 284TS All 26.0 9.50 3.25 15.5 1.625 13.40 4.75 11.0 7.0 14.19 1.420 0.375 1.88 286TS All 27.5 11.00 3.25 15.5 1.625 13.40 4.75 11.0 7.0 14.19 1.420 0.375 1.88 324T All 32.0 10.50 5.25 17.1 2.125 15.75 5.25 12.5 8.0 15.94 1.850 0.500 3.88 326T All 32.0 12.00 5.25 17.1 2.125 15.75 5.25 12.5 8.0 15.94 1.850 0.500 3.88 324TS All 30.0 10.50 3.75 17.1 1.875 15.75 5.25 12.5 8.0 15.94 1.590 0.500 2.00 326TS All 30.0 12.00 3.75 17.1 1.875 15.75 5.25 12.5 8.0 15.94 1.590 0.500 2.00 D-Flange C-Face Frame Poles BA AH AJ AK BD BF # BF Frame Poles BA AH AJ AK BD BF # BF 284TC All 4.75 4.38 9 10.5 10.75 4 1/2”-13NC 284TD All 4.75 4.62 12.5 11.0 13.88 4 0.81 286TC All 4.75 4.38 9 10.5 10.75 4 1/2”-13NC 286TD All 4.75 4.62 12.5 11.0 13.88 4 0.81 284TSC All 4.75 3.00 9 10.5 10.75 4 1/2”-13NC 284TSD All 4.75 3.25 12.5 11.0 13.88 4 0.81 286TSC All 4.75 3.00 9 10.5 10.75 4 1/2”-13NC 286TSD All 4.75 3.25 12.5 11.0 13.88 4 0.81 324TC All 5.25 5.00 11 12.5 12.75 4 5/8”-11NC 324TD All 5.25 5.25 16.0 14.0 17.88 4 0.81 326TC All 5.25 5.00 11 12.5 12.75 4 5/8”-11NC 326TD All 5.25 5.25 16.0 14.0 17.88 4 0.81 324TSC All 5.25 3.50 11 12.5 12.75 4 5/8”-11NC 324TSD All 5.25 3.75 16.0 14.0 17.88 4 0.81 326TSC All 5.25 3.50 11 12.5 12.75 4 5/8”-11NC 326TSD All 5.25 3.75 16.0 14.0 17.88 4 0.81 Dimensions in inches. Typical dimensions data, not guaranteed. 5-20 2014 Low Voltage AC Motors Selection and Pricing Guide Definite purpose Frames 360-400 General Purpose Motors SD10 MS Introduction General dimensions Severe Duty Motors Poles C 2F N-W P U AB BA 2E D O R S ES 364T All 34.2 11.25 5.88 18.5 2.375 17.69 5.88 14.0 9.0 17.81 2.020 0.625 4.25 All 34.2 12.25 5.88 18.5 2.375 17.69 5.88 14.0 9.0 17.81 2.020 0.625 4.25 All 32.1 11.25 3.75 18.5 1.875 17.69 5.88 14.0 9.0 17.81 1.590 0.500 2.00 365TS All 32.1 12.25 3.75 18.5 1.875 17.69 5.88 14.0 9.0 17.81 1.590 0.500 2.00 404T All 39.5 12.25 7.25 19.6 2.875 17.50 6.63 16.0 10.0 19.90 2.450 0.750 5.63 All 39.5 13.75 7.25 19.6 2.875 17.50 6.63 16.0 10.0 19.90 2.450 0.750 5.63 All 36.5 12.25 4.25 19.6 2.125 17.50 6.63 16.0 10.0 19.90 1.850 0.500 2.75 405TS All 36.5 13.75 4.25 19.6 2.125 17.50 6.63 16.0 10.0 19.90 1.850 0.500 2.75 Frame Poles BA AH AJ AK BD BF # BF Frame Poles BA AH AJ AK BD BF # BF 364TC All 5.88 5.62 11 12.5 12.75 8 5/8”-11NC 364TD All 5.88 5.88 16 14.0 17.88 4 0.81 Special Features Detail 405T 404TS Definite Purpose Motors 365T 364TS Hazardous Duty Motors Keyseat Frame Options Selection and Pricing All 5.88 5.62 11 12.5 12.75 8 5/8”-11NC 365TD All 5.88 5.88 16 14.0 17.88 4 0.81 All 5.88 3.50 11 12.5 12.75 8 5/8”-11NC 364TSD All 5.88 3.75 16 14.0 17.88 4 0.81 365TSC All 5.88 3.50 11 12.5 12.75 8 5/8”-11NC 365TSD All 5.88 3.75 16 14.0 17.88 4 0.81 404TC All 6.63 7.00 11 12.5 13.50 8 5/8”-11NC 404TD All 6.63 7.25 20 18.0 21.88 8 0.81 405TC All 6.63 7.00 11 12.5 13.50 8 5/8”-11NC 405TD All 6.63 7.25 20 18.0 21.88 8 0.81 404TSC All 6.63 4.00 11 12.5 13.50 8 5/8”-11NC 404TSD All 6.63 4.25 20 18.0 21.88 8 0.81 405TSC All 6.63 4.00 11 12.5 13.50 8 5/8”-11NC 405TSD All 6.63 4.25 20 18.0 21.88 8 0.81 2014 Low Voltage AC Motors Selection and Pricing Guide 5-21 Part Number Index Dimensions in inches. Typical dimensions data, not guaranteed. General Dimensions 365TC 364TSC Typical Performance Data D-Flange C-Face General dimensions SD10 MS Definite purpose Frames 440-S440 Keyseat Frame Poles C 2F N-W P U AB BA 2E D O R S ES 444T All 45.6 14.50 8.50 21.7 3.375 19.94 7.5 18.0 11.0 21.90 0.875 2.880 6.88 445T All 45.6 16.50 8.50 21.7 3.375 19.94 7.5 18.0 11.0 21.90 0.875 2.880 6.88 444TS All 41.8 14.50 4.75 21.7 2.375 19.94 7.5 18.0 11.0 21.90 0.625 2.020 3.00 445TS All 41.8 16.50 4.75 21.7 2.375 19.94 7.5 18.0 11.0 21.90 0.625 2.020 3.00 447T All 49.1 20.00 8.50 21.8 3.375 19.94 7.5 18.0 11.0 21.90 0.875 2.880 6.88 447TS All 45.4 20.00 4.75 21.8 2.375 19.94 7.5 18.0 11.0 21.90 0.625 2.020 3.00 449T All 54.1 25.00 8.50 21.8 3.375 22.00 7.5 18.0 11.0 21.90 0.875 2.880 6.88 449TS All 50.3 25.00 4.75 21.8 2.375 22.00 7.5 18.0 11.0 21.90 0.625 2.020 3.00 S449LS All 67.1 25.00 9.12 25.4 3.625 23.01 7.5 18.0 11.0 23.40 0.875 3.130 7.50 S449SS All 67.1 25.00 5.25 25.4 2.625 23.01 7.5 18.0 11.0 23.40 0.625 2.280 3.50 Frame Poles BA AH AJ AK BD BF # BF Frame Poles BA AH AJ AK BD BF # BF 444TC All 7.5 8.25 14 16.0 16.62 8 5/8”-11NC 444TD All 7.5 8.50 20 18.0 21.88 8 0.81 D -Flange C-Face 445TC All 7.5 8.25 14 16.0 16.62 8 5/8”-11NC 445TD All 7.5 8.50 20 18.0 21.88 8 0.81 444TSC All 7.5 4.50 14 16.0 16.62 8 5/8”-11NC 444TSD All 7.5 4.75 20 18.0 21.88 8 0.81 445TSC All 7.5 4.50 14 16.0 16.62 8 5/8”-11NC 445TSD All 7.5 4.75 20 18.0 21.88 8 0.81 447TC All 7.5 8.25 14 16.0 16.62 8 5/8”-11NC 447TD All 7.5 8.50 20 18.0 21.88 8 0.81 447TSC All 7.5 4.50 14 16.0 16.62 8 5/8”-11NC 447TSD All 7.5 4.75 20 18.0 21.88 8 0.81 449TC All 7.5 8.25 14 16.0 16.62 8 5/8”-11NC 449TD All 7.5 8.50 20 18.0 21.88 8 0.81 449TSC All 7.5 4.50 14 16.0 16.62 8 5/8”-11NC 449TSD All 7.5 4.75 20 18.0 21.88 8 0.81 Dimensions in inches. Typical dimensions data, not guaranteed. 5-22 2014 Low Voltage AC Motors Selection and Pricing Guide Definite purpose Vertical P-base solid shaft General Purpose Motors RGZVESD / RGZVILESD Introduction General dimensions Severe Duty Motors Hazardous Duty Motors U ES EU EP AH AJ AK BB BD BF R S 143LP Frame 145LP 1.125 1.25 0.875 1.16 2.75 9.12 8.25 0.19 10.00 0.438 0.986 0.250 182LP 184LP 1.125 1.25 0.875 1.16 2.75 9.12 8.25 0.19 10.00 0.438 0.986 0.250 215LP 1.625 1.25 1.25 1.77 2.75 9.12 8.25 0.19 10.00 0.438 1.416 0.375 256LP 1.625 1.25 1.25 1.77 2.75 9.12 8.25 0.19 10.00 0.438 1.416 0.375 284LPH 286LPH 2.125 3.00 1.75 2.36 4.50 14.75 13.5 0.25 16.50 0.688 1.845 0.500 324LP 326LP 2.125 3.00 1.75 2.36 4.50 14.75 13.5 0.25 16.50 0.688 1.845 0.500 364LP 365LP 2.125 3.00 1.75 2.38 4.50 14.75 13.5 0.25 16.50 0.688 1.845 0.500 404LP 405LP 2.125 3.00 1.75 2.999 4.50 14.75 13.5 0.25 16.38 0.688 1.845 0.500 445LP 2.125 3.00 1.75 2.999 4.50 14.75 13.5 0.25 16.38 0.688 1.845 0.500 449LP 2.125 3.00 1.75 2.999 4.50 14.75 13.5 0.25 16.38 0.688 1.845 0.500 Normal thrust Frame EU EP AH AJ AK BB BD BF R S 0.875 1.25 0.688 1.16 2.75 9.12 8.25 0.19 10.00 0.438 0.771 0.188 182HP 184HP 1.125 1.25 0.875 1.16 2.75 9.12 8.25 0.19 10.00 0.438 0.986 0.250 213HP 215HP 1.125 1.25 0.875 1.38 2.75 9.12 8.25 0.19 10.00 0.438 0.986 0.250 254HP 256HP 1.125 1.25 0.875 1.77 2.75 9.12 8.25 0.19 10.00 0.438 0.986 0.250 284HP 286HP 1.125 1.25 0.875 2.36 2.75 9.12 8.25 0.19 10.00 0.438 0.986 0.250 284HPH 286HPH 1.625 3.00 1.250 2.36 4.50 14.75 13.5 0.25 16.50 0.688 1.416 0.375 324HP 326HP 1.625 3.00 1.250 2.36 4.50 14.75 13.5 0.25 16.50 0.688 1.416 0.375 364HP 365HP 1.625 3.00 1.250 2.36 4.50 14.75 13.5 0.25 16.50 0.688 1.416 0.375 404HP 405HP 1.625 3.00 1.250 2.999 4.50 14.75 13.5 0.25 16.38 0.688 1.416 0.375 444HP 445HP 2.125 3.00 1.750 2.999 4.50 14.75 13.5 0.25 16.38 0.688 1.845 0.500 447HP 449HP 2.125 3.00 1.750 2.999 4.50 14.75 13.5 0.25 16.38 0.688 1.845 0.500 2014 Low Voltage AC Motors Selection and Pricing Guide 5-23 Part Number Index Dimensions in inches. Typical dimensions data, not guaranteed. General Dimensions ES 145HP Typical Performance Data U 143HP Options Selection and Pricing 444LP 447LP Special Features Detail 213LP 254LP Definite Purpose Motors In-line thrust General dimensions SIMOTICS General purpose Conduit boxes GP100A / GP100 External Dimensions (in) Frame A B C D E F G Approx. internal volume (in3) 140 2.79 5.31 4.41 4.02 2.69 0.95 0.75 37 4 180 2.79 5.31 4.41 4.02 2.69 0.95 0.75 37 4 210 3.30 6.89 5.71 5.20 3.82 1.18 1.00 87 4 250 3.30 6.89 5.71 5.20 3.82 1.18 1.25 87 4 280 5.00 8.60 8.70 6.38 4.50 2.16 2.00 230 4 320 5.00 8.60 8.70 7.62 4.50 2.16 2.50 230 4 360 7.44 9.94 9.69 9.50 4.72 3.54 3.00 465 4 400 7.44 9.94 9.69 9.50 4.72 3.54 3.00 465 4 Dimensions in inches. Typical dimensions data, not guaranteed. 5-24 Number of cover bolts 2014 Low Voltage AC Motors Selection and Pricing Guide Conduit boxes SD100 / SD100 IEEE841 / SD10 MS General Purpose Motors SIMOTICS Severe duty Introduction General dimensions Severe Duty Motors A B C D E F G 140 3.23 5.98 4.96 4.37 2.28 1.18 0.75 41 Number of cover bolts 4 180 3.23 5.98 4.96 4.37 2.28 1.18 0.75 41 4 210 4.24 7.11 5.94 5.32 3.43 1.69 1.00 86 4 250 4.24 7.11 5.94 5.32 3.43 1.69 1.25 86 4 280 5.50 8.31 7.12 6.38 4.75 2.44 1.50 226 4 6.44 10.00 8.50 7.62 5.50 3.00 2.00 380 4 8.06 12.31 10.50 9.50 7.00 3.50 3.00 762 4 400 8.06 12.31 10.50 9.50 7.00 3.50 3.00 762 4 444-447 8.06 12.31 10.50 9.50 7.00 3.50 3.00 762 4 449 10.19 15.70 13.50 12.50 8.50 5.00 3.00 1696 4 S449 10.19 15.70 13.50 12.50 8.50 5.00 4.00 1696 4 Special Features Detail 320 360 Definite Purpose Motors Frame Approx. internal volume (in3) Hazardous Duty Motors External Dimensions (in) Options Selection and Pricing Typical Performance Data General Dimensions 2014 Low Voltage AC Motors Selection and Pricing Guide 5-25 Part Number Index Dimensions in inches. Typical dimensions data, not guaranteed. General dimensions SIMOTICS Explosion proof Conduit boxes XP100 / XP100 ID1 External Dimensions (in) Frame A B C D E F G H Approx. internal volume (in3) 140 7.28 6.65 4.07 2.56 1.61 3/4”-14 NPT 0.35 2.20 39.0 Number of cover bolts 4 180 7.28 6.65 4.07 2.56 1.61 3/4”-14 NPT 0.35 2.20 39.0 4 210 8.07 7.40 4.66 2.95 1.73 1”-11.5NPT 0.35 2.83 64.0 4 250 8.07 7.40 4.66 2.95 1.73 1”-11.5NPT 0.35 2.83 64.0 4 280 8.07 7.40 4.66 2.95 1.73 1.5”-11.5NPT 0.35 2.83 64.0 4 320 12.00 11.13 7.90 4.65 2.76 2”-11.5NPT 0.35 3.62 278.4 6 360 12.00 11.13 7.90 4.65 2.76 3”-8NPT 0.35 3.62 278.4 6 400 14.09 13.11 9.88 5.83 4.17 3”-8NPT 0.35 4.72 552.0 6 444/445 14.09 13.11 9.88 5.83 4.17 3”-8NPT 0.35 4.72 552.0 6 5-26 447 14.09 13.11 9.88 5.83 4.17 3”-8NPT 0.35 4.72 552.0 6 449 17.24 16.14 11.75 6.89 5.45 3”-8NPT 0.35 4.72 972.0 6 2014 Low Voltage AC Motors Selection and Pricing Guide Conduit boxes RGZ General Purpose Motors SIMOTICS Definite purpose Introduction General dimensions Severe Duty Motors Frame A B C D E F G Approx. internal volume (in3) 140 2.68 4.60 4.15 3.58 2.36 1.00 0.75 27 4 180 3.07 4.76 4.49 3.92 2.48 1.24 0.75 36 4 210 3.86 7.05 5.49 4.90 3.66 1.56 1.00 85 4 250 3.86 7.05 5.49 4.90 3.66 1.56 1.25 85 4 280 5.50 8.31 7.12 6.38 4.75 2.44 1.50 226 4 320 6.44 10.00 8.50 7.62 5.50 3.00 2.00 380 4 360 8.06 12.31 10.50 9.50 7.00 3.50 3.00 762 4 Number of cover bolts 12.31 10.50 9.50 7.00 3.50 3.00 762 4 8.06 12.31 10.50 9.50 7.00 3.50 3.00 762 4 449 10.19 15.70 13.50 12.50 8.50 5.00 3.00 1696 4 S449 10.19 15.70 13.50 12.50 8.50 5.00 4.00 1696 4 Special Features Detail 8.06 Definite Purpose Motors 400 444-447 Hazardous Duty Motors External Dimensions (in) Options Selection and Pricing Typical Performance Data General Dimensions 2014 Low Voltage AC Motors Selection and Pricing Guide 5-27 Part Number Index Dimensions in inches. Typical dimensions data, not guaranteed. Introduction Part number index SIMOTICS NEMA motors Type Page 1.5 GP100A 2-4 1LE21111AA314AA3 3600 2 GP100A 2-5 1LE21211AB413AA3 1800 2 GP100A 2-6 1LE21111AB214AA3 1800 1 GP100A 2-5 1LE21211AB413EA3 1800 2 GP100A 2-7 1LE21111AB314AA3 1800 1.5 GP100A 2-5 1LE21211AB413GA3 1800 2 GP100A 2-8 1LE21111AB414AA3 1800 2 GP100A 2-5 1LE21211AB414AA3 1800 2 GP100A 2-2 1LE21111AC314AA3 1200 1 GP100A 2-5 1LE21211AB414EA3 1800 2 GP100A 2-3 1LE21111CA114AA3 3600 3 GP100A 2-5 1LE21211AB414GA3 1800 2 GP100A 2-4 1LE21111CA314AA3 3600 5 GP100A 2-5 1LE21211AC313AA3 1200 1 GP100A 2-6 1LE21111CB114AA3 1800 3 GP100A 2-5 1LE21211AC313EA3 1200 1 GP100A 2-7 1LE21111CB314AA3 1800 5 GP100A 2-5 1LE21211AC313GA3 1200 1 GP100A 2-8 1LE21112AA114AA3 3600 7.5 GP100A 2-5 1LE21211AC314AA3 1200 1 GP100A 2-2 1LE21112AA214AA3 3600 10 GP100A 2-5 1LE21211AC314EA3 1200 1 GP100A 2-3 1LE21112AB114AA3 1800 7.5 GP100A 2-5 1LE21211AC314GA3 1200 1 GP100A 2-4 1LE21112AB214AA3 1800 10 GP100A 2-5 1LE21211CA113AA3 3600 3 GP100A 2-6 1LE21112AC114AA3 1200 3 2-5 1LE21211CA113EA3 3600 3 GP100A 2-7 1LE21112AC214AA3 1200 5 GP100A GP100A 2-5 1LE21211CA113GA3 3600 3 GP100A 2-8 1LE21112BA114AA3 3600 15 GP100A 2-5 1LE21211CA114AA3 3600 3 GP100A 2-2 1LE21112BA214AA3 3600 20 GP100A 2-5 1LE21211CA114EA3 3600 3 GP100A 2-3 1LE21112BB114AA3 1800 15 GP100A 2-5 1LE21211CA114GA3 3600 3 GP100A 2-4 1LE21112BB214AA3 1800 20 GP100A 2-5 1LE21211CA313AA3 3600 5 GP100A 2-6 1LE21112BC114AA3 1200 7.5 GP100A 2-5 1LE21211CA313GA3 3600 5 GP100A 2-8 1LE21112BC214AA3 1200 10 GP100A 2-5 1LE21211CA314AA3 3600 5 GP100A 2-2 1LE21211AA113AA3 3600 1 GP100A 2-6 1LE21211CA314EA3 3600 5 GP100A 2-3 1LE21211AA113EA3 3600 1 GP100A 2-7 1LE21211CA314GA3 3600 5 GP100A 2-4 1LE21211AA113GA3 3600 1 GP100A 2-8 1LE21211CB113AA3 1800 3 GP100A 2-6 1LE21211AA114AA3 3600 1 GP100A 2-2 1LE21211CB113EA3 1800 3 GP100A 2-7 1LE21211AA114EA3 3600 1 GP100A 2-3 1LE21211CB113GA3 1800 3 GP100A 2-8 1LE21211AA114GA3 3600 1 GP100A 2-4 1LE21211CB114AA3 1800 3 GP100A 2-2 1LE21211AA213AA3 3600 1.5 GP100A 2-6 1LE21211CB114EA3 1800 3 GP100A 2-3 1LE21211AA213EA3 3600 1.5 GP100A 2-7 1LE21211CB114GA3 1800 3 GP100A 2-4 1LE21211AA213GA3 3600 1.5 GP100A 2-8 1LE21211CB313AA3 1800 5 GP100A 2-6 1LE21211AA214AA3 3600 1.5 GP100A 2-2 1LE21211CB313EA3 1800 5 GP100A 2-7 1LE21211AA214EA3 3600 1.5 GP100A 2-3 1LE21211CB313GA3 1800 5 GP100A 2-8 1LE21211AA214GA3 3600 1.5 GP100A 2-4 1LE21211CB314AA3 1800 5 GP100A 2-2 1LE21211AA313AA3 3600 2 GP100A 2-6 1LE21211CB314EA3 1800 5 GP100A 2-3 1LE21211AA313EA3 3600 2 GP100A 2-7 1LE21211CB314EA3 3600 5 GP100A 2-7 1LE21211AA313GA3 3600 2 GP100A 2-8 1LE21211CB314GA3 1800 5 GP100A 2-4 1LE21211AA314AA3 3600 2 GP100A 2-2 1LE21211CC113AA3 1200 1.5 GP100A 2-6 1LE21211AA314EA3 3600 2 GP100A 2-3 1LE21211CC113EA3 1200 1.5 GP100A 2-7 1LE21211AA314GA3 3600 2 GP100A 2-4 1LE21211CC113GA3 1200 1.5 GP100A 2-8 1LE21211AB213AA3 1800 1 GP100A 2-6 1LE21211CC114AA3 1200 1.5 GP100A 2-2 1LE21211AB213EA3 1800 1 GP100A 2-7 1LE21211CC114EA3 1200 1.5 GP100A 2-3 1LE21211AB213GA3 1800 1 GP100A 2-8 1LE21211CC114GA3 1200 1.5 GP100A 2-4 1LE21211AB214AA3 1800 1 GP100A 2-2 1LE21211CC313AA3 1200 2 GP100A 2-6 1LE21211AB214EA3 1800 1 GP100A 2-3 1LE21211CC313EA3 1200 2 GP100A 2-7 1LE21211AB214GA3 1800 1 GP100A 2-4 1LE21211CC313GA3 1200 2 GP100A 2-8 1LE21211AB313AA3 1800 1.5 GP100A 2-6 1LE21211CC314AA3 1200 2 GP100A 2-2 1LE21211AB313EA3 1800 1.5 GP100A 2-7 1LE21211CC314EA3 1200 2 GP100A 2-3 1LE21211AB313GA3 1800 1.5 GP100A 2-8 1LE21211CC314GA3 1200 2 GP100A 2-4 1LE21211AB314AA3 1800 1.5 GP100A 2-2 1LE21212AA113AA3 3600 7.5 GP100A 2-6 1LE21211AB314EA3 1800 1.5 GP100A 2-3 1LE21212AA113EA3 3600 7.5 GP100A 2-7 6-1 Part Number Index 2014 Low Voltage AC Motors Selection and Pricing Guide General Dimensions RPM 1800 Typical Performance Data HP 1LE21211AB314GA3 Options Selection and Pricing Part Number 2-5 Special Features Detail Page GP100A Definite Purpose Motors Type 1.5 Hazardous Duty Motors RPM Severe Duty Motors HP 3600 General Purpose Motors Part Number 1LE21111AA214AA3 Part number index SIMOTICS NEMA motors 6-2 Part Number HP RPM Type Page Part Number HP RPM Type 1LE21212AA113GA3 3600 7.5 GP100A 2-8 1LE21212BB114GA3 1800 15 GP100A 2-4 1LE21212AA114AA3 3600 7.5 GP100A 2-2 1LE21212BB213AA3 1800 20 GP100A 2-6 Page 1LE21212AA114EA3 3600 7.5 GP100A 2-3 1LE21212BB213EA3 1800 20 GP100A 2-7 1LE21212AA114GA3 3600 7.5 GP100A 2-4 1LE21212BB213GA3 1800 20 GP100A 2-8 1LE21212AA213AA3 3600 10 GP100A 2-6 1LE21212BB214AA3 1800 20 GP100A 2-2 1LE21212AA213EA3 3600 10 GP100A 2-7 1LE21212BB214EA3 1800 20 GP100A 2-3 1LE21212AA213GA3 3600 10 GP100A 2-8 1LE21212BB214GA3 1800 20 GP100A 2-4 1LE21212AA214AA3 3600 10 GP100A 2-2 1LE21212BC113AA3 1200 7.5 GP100A 2-6 1LE21212AA214EA3 3600 10 GP100A 2-3 1LE21212BC113EA3 1200 7.5 GP100A 2-7 1LE21212AA214GA3 3600 10 GP100A 2-4 1LE21212BC113GA3 1200 7.5 GP100A 2-8 1LE21212AB113AA3 1800 7.5 GP100A 2-6 1LE21212BC114AA3 1200 7.5 GP100A 2-2 1LE21212AB113EA3 1800 7.5 GP100A 2-7 1LE21212BC114EA3 1200 7.5 GP100A 2-3 1LE21212AB113GA3 1800 7.5 GP100A 2-8 1LE21212BC114GA3 1200 7.5 GP100A 2-4 1LE21212AB114AA3 1800 7.5 GP100A 2-2 1LE21212BC213AA3 1200 10 GP100A 2-6 1LE21212AB114EA3 1800 7.5 GP100A 2-3 1LE21212BC213EA3 1200 10 GP100A 2-7 1LE21212AB114GA3 1800 7.5 GP100A 2-4 1LE21212BC213GA3 1200 10 GP100A 2-8 1LE21212AB213AA3 1800 10 GP100A 2-6 1LE21212BC214AA3 1200 10 GP100A 2-2 1LE21212AB213EA3 1800 10 GP100A 2-7 1LE21212BC214EA3 1200 10 GP100A 2-3 1LE21212AB213GA3 1800 10 GP100A 2-8 1LE21212BC214GA3 1200 10 GP100A 2-4 1LE21212AB214AA3 1800 10 GP100A 2-2 1LE22111AA214AA3 3600 1.5 GP100 2-14 2-15 1LE21212AB214EA3 1800 10 GP100A 2-3 1LE22111AA214GA3 3600 1.5 GP100 1LE21212AB214GA3 1800 10 GP100A 2-4 1LE22111AA314AA3 3600 2.0 GP100 2-14 1LE21212AC113AA3 1200 3 GP100A 2-6 1LE22111AA314GA3 3600 2 GP100 2-15 1LE21212AC113EA3 1200 3 GP100A 2-7 1LE22111AB214AA3 1800 1 GP100 2-14 1LE21212AC113GA3 1200 3 GP100A 2-8 1LE22111AB214GA3 1800 1 GP100 2-15 1LE21212AC114AA3 1200 3 GP100A 2-2 1LE22111AB314AA3 1800 1.5 GP100 2-14 1LE21212AC114EA3 1200 3 GP100A 2-3 1LE22111AB314GA3 1800 1.5 GP100 2-15 1LE21212AC114GA3 1200 3 GP100A 2-4 1LE22111AB414AA3 1800 2 GP100 2-14 1LE21212AC213AA3 1200 5 GP100A 2-6 1LE22111AB414GA3 1800 2 GP100 2-15 1LE21212AC213EA3 1200 5 GP100A 2-7 1LE22111AC314AA3 1200 1 GP100 2-14 1LE21212AC213GA3 1200 5 GP100A 2-8 1LE22111AC314GA3 1200 1 GP100 2-15 1LE21212AC214AA3 1200 5 GP100A 2-2 1LE22111CA114AA3 3600 3 GP100 2-14 1LE21212AC214EA3 1200 5 GP100A 2-3 1LE22111CA114GA3 3600 3 GP100 2-15 1LE21212AC214GA3 1200 5 GP100A 2-4 1LE22111CA314AA3 3600 5 GP100 2-14 1LE21212BA113AA3 3600 15 GP100A 2-6 1LE22111CA314GA3 3600 5 GP100 2-15 1LE21212BA113EA3 3600 15 GP100A 2-7 1LE22111CB114AA3 1800 3 GP100 2-14 1LE21212BA113GA3 3600 15 GP100A 2-8 1LE22111CB114GA3 1800 3 GP100 2-15 1LE21212BA114AA3 3600 15 GP100A 2-2 1LE22111CB314AA3 1800 5 GP100 2-14 1LE21212BA114EA3 3600 15 GP100A 2-3 1LE22111CB314GA3 1800 5.0 GP100 2-15 1LE21212BA114GA3 3600 15 GP100A 2-4 1LE22112AA114AA3 3600 7.5 GP100 2-14 1LE21212BA213AA3 3600 20 GP100A 2-6 1LE22112AA114GA3 3600 7.5 2-15 1LE21212BA213EA3 3600 20 GP100A 2-7 1LE22112AA214AA3 3600 10 GP100 GP100 1LE21212BA213GA3 3600 20 GP100A 2-8 1LE22112AA214GA3 3600 10 GP100 2-15 2-14 1LE21212BA214AA3 3600 20 GP100A 2-2 1LE22112AB114AA3 1800 7.5 GP100 2-14 1LE21212BA214EA3 3600 20 GP100A 2-3 1LE22112AB114GA3 1800 7.5 GP100 2-15 1LE21212BA214GA3 3600 20 GP100A 2-4 1LE22112AB214AA3 1800 10.0 2-14 1LE21212BB113AA3 1800 15 GP100A 2-6 1LE22112AB214GA3 1800 10 GP100 GP100 1LE21212BB113EA3 1800 15 GP100A 2-7 1LE22112AC114AA3 1200 3 GP100 2-14 2-15 1LE21212BB113GA3 1800 15 GP100A 2-8 1LE22112AC114GA3 1200 3 GP100 2-15 1LE21212BB114AA3 1800 15 GP100A 2-2 1LE22112AC214AA3 1200 5 GP100 2-14 1LE21212BB114EA3 1800 15 GP100A 2-3 1LE22112AC214GA3 1200 5 GP100 2-15 2014 Low Voltage AC Motors Selection and Pricing Guide Introduction Part number index SIMOTICS NEMA motors Type Page 1 GP100 2-10 1LE22112BA114GA3 3600 15 GP100 2-15 1LE22211AC314EA3 1200 1 GP100 2-12 1LE22112BA214AA3 3600 20 GP100 2-14 1LE22211AC314GA3 1200 1 GP100 2-13 1LE22112BA214GA3 3600 20 GP100 2-15 1LE22211CA113AA3 3600 3 GP100 2-16 1LE22112BB114AA3 1800 15 GP100 2-14 1LE22211CA113EA3 3600 3 GP100 2-18 1LE22112BB114GA3 1800 15 GP100 2-15 1LE22211CA113GA3 3600 3 GP100 2-19 1LE22112BB214AA3 1800 20 GP100 2-14 1LE22211CA114AA3 3600 3 GP100 2-10 1LE22112BB214GA3 1800 20 GP100 2-15 1LE22211CA114EA3 3600 3 GP100 2-12 1LE22112BC114AA3 1200 7.5 GP100 2-14 1LE22211CA114GA3 3600 3 GP100 2-13 1LE22112BC114GA3 1200 7.5 GP100 2-15 1LE22211CA313AA3 3600 5 GP100 2-16 1LE22112BC214AA3 1200 10 GP100 2-14 1LE22211CA313EA3 3600 5 GP100 2-18 1LE22112BC214GA3 1200 10 GP100 2-15 1LE22211CA313GA3 3600 5 GP100 2-19 1LE22211AA113AA3 3600 1 GP100 2-16 1LE22211CA314AA3 3600 5 GP100 2-10 1LE22211AA113EA3 3600 1 GP100 2-18 1LE22211CA314EA3 3600 5 GP100 2-12 1LE22211AA113GA3 3600 1 GP100 2-19 1LE22211CA314GA3 3600 5 GP100 2-13 1LE22211AA114AA3 3600 1 GP100 2-10 1LE22211CB113AA3 1800 3 GP100 2-16 1LE22211AA114EA3 3600 1 GP100 2-12 1LE22211CB113EA3 1800 3 GP100 2-18 1LE22211AA114GA3 3600 1 GP100 2-13 1LE22211CB113GA3 1800 3 GP100 2-19 1LE22211AA213AA3 3600 1.5 GP100 2-16 1LE22211CB114AA3 1800 3 GP100 2-10 1LE22211AA213EA3 3600 1.5 GP100 2-18 1LE22211CB114EA3 1800 3 GP100 2-12 1LE22211AA213GA3 3600 1.5 GP100 2-19 1LE22211CB114GA3 1800 3 GP100 2-13 1LE22211AA214AA3 3600 1.5 GP100 2-10 1LE22211CB313AA3 1800 5 GP100 2-16 1LE22211AA214EA3 3600 1.5 GP100 2-12 1LE22211CB313EA3 1800 5 GP100 2-18 1LE22211AA214GA3 3600 1.5 GP100 2-13 1LE22211CB313GA3 1800 5 GP100 2-19 1LE22211AA313AA3 3600 2 GP100 2-16 1LE22211CB314AA3 1800 5 GP100 2-10 1LE22211AA313EA3 3600 2 GP100 2-18 1LE22211CB314EA3 1800 5 GP100 2-12 1LE22211AA313GA3 3600 2 GP100 2-19 1LE22211CB314GA3 1800 5 GP100 2-13 1LE22211AA314AA3 3600 2 GP100 2-10 1LE22211CC113AA3 1200 1.5 GP100 2-16 1LE22211AA314EA3 3600 2 GP100 2-12 1LE22211CC113EA3 1200 1.5 GP100 2-18 1LE22211AA314GA3 3600 2 GP100 2-13 1LE22211CC113GA3 1200 1.5 GP100 2-19 1LE22211AB213AA3 1800 1 GP100 2-16 1LE22211CC114AA3 1200 1.5 GP100 2-10 1LE22211AB213EA3 1800 1 GP100 2-18 1LE22211CC114EA3 1200 1.5 GP100 2-12 1LE22211AB213GA3 1800 1 GP100 2-19 1LE22211CC114GA3 1200 1.5 GP100 2-13 1LE22211AB214AA3 1800 1 GP100 2-10 1LE22211CC313AA3 1200 2 GP100 2-16 1LE22211AB214EA3 1800 1 GP100 2-12 1LE22211CC313EA3 1200 2 GP100 2-18 1LE22211AB214GA3 1800 1 GP100 2-13 1LE22211CC313GA3 1200 2 GP100 2-19 1LE22211AB313AA3 1800 1.5 GP100 2-16 1LE22211CC314AA3 1200 2 GP100 2-10 1LE22211AB313EA3 1800 1.5 GP100 2-18 1LE22211CC314EA3 1200 2 GP100 2-12 1LE22211AB313GA3 1800 1.5 GP100 2-19 1LE22211CC314GA3 1200 2 GP100 2-13 1LE22211AB314AA3 1800 1.5 GP100 2-10 1LE22211CD113AA3 900 1 GP100 2-16 1LE22211AB314EA3 1800 1.5 GP100 2-12 1LE22211CD113EA3 900 1 GP100 2-18 1LE22211AB314GA3 1800 1.5 GP100 2-13 1LE22211CD113GA3 900 1 GP100 2-19 1LE22211AB413AA3 1800 2 GP100 2-16 1LE22211CD114AA3 900 1 GP100 2-10 1LE22211AB413EA3 1800 2 GP100 2-18 1LE22211CD114EA3 900 1 GP100 2-12 1LE22211AB413GA3 1800 2 GP100 2-19 1LE22211CD114GA3 900 1 GP100 2-13 1LE22211AB414AA3 1800 2 GP100 2-10 1LE22211CD313AA3 900 1.5 GP100 2-16 1LE22211AB414EA3 1800 2 GP100 2-12 1LE22211CD313EA3 900 1.5 GP100 2-18 1LE22211AB414GA3 1800 2 GP100 2-13 1LE22211CD313GA3 900 1.5 GP100 2-19 1LE22211AC313AA3 1200 1 GP100 2-16 1LE22211CD314AA3 900 1.5 GP100 2-10 1LE22211AC313EA3 1200 1 GP100 2-18 1LE22211CD314EA3 900 1.5 GP100 2-12 1LE22211AC313GA3 1200 1 GP100 2-19 1LE22211CD314GA3 900 1.5 GP100 2-13 6-3 Part Number Index 2014 Low Voltage AC Motors Selection and Pricing Guide General Dimensions RPM 1200 Typical Performance Data HP 1LE22211AC314AA3 Options Selection and Pricing Part Number 2-14 Special Features Detail Page GP100 Definite Purpose Motors Type 15 Hazardous Duty Motors RPM Severe Duty Motors HP 3600 General Purpose Motors Part Number 1LE22112BA114AA3 Part number index SIMOTICS NEMA motors 6-4 Part Number HP RPM Type Page Part Number HP RPM Type 1LE22212AA113AA3 3600 7.5 GP100 2-16 1LE22212BA114AA3 3600 15 GP100 Page 2-10 1LE22212AA113EA3 3600 7.5 GP100 2-18 1LE22212BA114EA3 3600 15 GP100 2-12 1LE22212AA113GA3 3600 7.5 GP100 2-19 1LE22212BA114GA3 3600 15 GP100 2-13 1LE22212AA114AA3 3600 7.5 GP100 2-10 1LE22212BA213AA3 3600 20 GP100 2-16 1LE22212AA114EA3 3600 7.5 GP100 2-12 1LE22212BA213EA3 3600 20 GP100 2-18 1LE22212AA114GA3 3600 7.5 GP100 2-13 1LE22212BA213GA3 3600 20 GP100 2-19 1LE22212AA213AA3 3600 10 GP100 2-16 1LE22212BA214AA3 3600 20 GP100 2-10 1LE22212AA213EA3 3600 10 GP100 2-18 1LE22212BA214EA3 3600 20 GP100 2-12 1LE22212AA213GA3 3600 10 GP100 2-19 1LE22212BA214GA3 3600 20 GP100 2-13 1LE22212AA214AA3 3600 10 GP100 2-10 1LE22212BB113AA3 1800 15 GP100 2-16 1LE22212AA214EA3 3600 10 GP100 2-12 1LE22212BB113EA3 1800 15 GP100 2-18 1LE22212AA214GA3 3600 10 GP100 2-13 1LE22212BB113GA3 1800 15 GP100 2-19 1LE22212AB113AA3 1800 7.5 GP100 2-16 1LE22212BB114AA3 1800 15 GP100 2-10 1LE22212AB113EA3 1800 7.5 GP100 2-18 1LE22212BB114EA3 1800 15 GP100 2-12 1LE22212AB113GA3 1800 7.5 GP100 2-19 1LE22212BB114GA3 1800 15 GP100 2-13 1LE22212AB114AA3 1800 7.5 GP100 2-10 1LE22212BB213AA3 1800 20 GP100 2-16 1LE22212AB114EA3 1800 7.5 GP100 2-12 1LE22212BB213EA3 1800 20 GP100 2-18 1LE22212AB114GA3 1800 7.5 GP100 2-13 1LE22212BB213GA3 1800 20 GP100 2-19 1LE22212AB213AA3 1800 10 GP100 2-16 1LE22212BB214AA3 1800 20 GP100 2-10 1LE22212AB213EA3 1800 10 GP100 2-18 1LE22212BB214EA3 1800 20 GP100 2-12 1LE22212AB213GA3 1800 10 GP100 2-19 1LE22212BB214GA3 1800 20 GP100 2-13 1LE22212AB214AA3 1800 10 GP100 2-10 1LE22212BC113AA3 1200 7.5 GP100 2-16 1LE22212AB214EA3 1800 10 GP100 2-12 1LE22212BC113EA3 1200 7.5 GP100 2-18 1LE22212AB214GA3 1800 10 GP100 2-13 1LE22212BC113GA3 1200 7.5 GP100 2-19 1LE22212AC113AA3 1200 3 GP100 2-16 1LE22212BC114AA3 1200 7.5 GP100 2-10 1LE22212AC113EA3 1200 3 GP100 2-18 1LE22212BC114EA3 1200 7.5 GP100 2-12 1LE22212AC113GA3 1200 3 GP100 2-19 1LE22212BC114GA3 1200 7.5 GP100 2-13 1LE22212AC114AA3 1200 3 GP100 2-10 1LE22212BC213AA3 1200 10 GP100 2-16 1LE22212AC114EA3 1200 3 GP100 2-12 1LE22212BC213EA3 1200 10 GP100 2-18 1LE22212AC114GA3 1200 3 GP100 2-13 1LE22212BC213GA3 1200 10 GP100 2-19 1LE22212AC213AA3 1200 5 GP100 2-16 1LE22212BC214AA3 1200 10 GP100 2-10 1LE22212AC213EA3 1200 5 GP100 2-18 1LE22212BC214EA3 1200 10 GP100 2-12 1LE22212AC213GA3 1200 5 GP100 2-19 1LE22212BC214GA3 1200 10 GP100 2-13 1LE22212AC214AA3 1200 5 GP100 2-10 1LE22212BD113AA3 900 5 GP100 2-16 1LE22212AC214EA3 1200 5 GP100 2-12 1LE22212BD113EA3 900 5 GP100 2-18 1LE22212AC214GA3 1200 5 GP100 2-13 1LE22212BD113GA3 900 5 GP100 2-19 1LE22212AD113AA3 900 2 GP100 2-16 1LE22212BD114AA3 900 5 GP100 2-10 1LE22212AD113EA3 900 2 GP100 2-18 1LE22212BD114EA3 900 5 GP100 2-12 1LE22212AD113GA3 900 2 GP100 2-19 1LE22212BD114GA3 900 5 GP100 2-13 1LE22212AD114AA3 900 2 GP100 2-10 1LE22212BD213AA3 900 7.5 GP100 2-16 1LE22212AD114EA3 900 2 GP100 2-12 1LE22212BD213EA3 900 7.5 GP100 2-18 1LE22212AD114GA3 900 2 GP100 2-13 1LE22212BD213GA3 900 7.5 GP100 2-19 1LE22212AD213AA3 900 3 GP100 2-16 1LE22212BD214AA3 900 7.5 GP100 2-10 1LE22212AD213EA3 900 3 GP100 2-18 1LE22212BD214EA3 900 7.5 GP100 2-12 1LE22212AD213GA3 900 3 GP100 2-19 1LE22212BD214GA3 900 7.5 GP100 2-13 1LE22212AD214AA3 900 3 GP100 2-10 1LE22212CB113AA3 1800 25 GP100 2-16 1LE22212AD214EA3 900 3 GP100 2-12 1LE22212CB116AA3 1800 25 GP100 2-10 1LE22212AD214GA3 900 3 GP100 2-13 1LE22212CB213AA3 1800 30 GP100 2-16 1LE22212BA113AA3 3600 15 GP100 2-16 1LE22212CB216AA3 1800 30 GP100 2-10 1LE22212BA113EA3 3600 15 GP100 2-18 1LE22212CC113AA3 1200 15 GP100 2-16 1LE22212BA113GA3 3600 15 GP100 2-19 1LE22212CC116AA3 1200 15 GP100 2-10 2014 Low Voltage AC Motors Selection and Pricing Guide Introduction Part number index SIMOTICS NEMA motors Type Page 125 GP100 2-11 1LE22212CC216AA3 1200 20 GP100 2-10 1LE22214CB113AA3 1800 125 GP100 2-17 1LE22212CD113AA3 900 10 GP100 2-16 1LE22214CB212AA3 1800 150 GP100 2-11 1LE22212CD116AA3 900 10 GP100 2-10 1LE22214CB213AA3 1800 150 GP100 2-17 1LE22212CD213AA3 900 15 GP100 2-16 1LE22214CB312AA3 1800 200 GP100 2-11 1LE22212CD216AA3 900 15 GP100 2-10 1LE22214CB313AA3 1800 200 GP100 2-17 1LE22212DA113AA3 3600 25 GP100 2-16 1LE22214CC112AA3 1200 100 GP100 2-11 1LE22212DA116AA3 3600 25 GP100 2-10 1LE22214CC113AA3 1200 100 GP100 2-17 1LE22212DA213AA3 3600 30 GP100 2-16 1LE22214CC212AA3 1200 125 GP100 2-11 1LE22212DA216AA3 3600 30 GP100 2-10 1LE22214CC213AA3 1200 125 GP100 2-17 1LE22213AB113AA3 1800 40 GP100 2-17 1LE22214CC312AA3 1200 150 GP100 2-11 1LE22213AB116AA3 1800 40 GP100 2-11 1LE22214CC313AA3 1200 150 GP100 2-17 1LE22213AB213AA3 1800 50 GP100 2-17 1LE22214CC512AA3 1200 200 GP100 2-11 1LE22213AB216AA3 1800 50 GP100 2-11 1LE22214CC513AA3 1200 200 GP100 2-17 1LE22213AC113AA3 1200 25 GP100 2-16 1LE22214DA112AA3 3600 125 GP100 2-11 1LE22213AC116AA3 1200 25 GP100 2-10 1LE22214DA113AA3 3600 125 GP100 2-17 1LE22213AC213AA3 1200 30 GP100 2-16 1LE22214DA212AA3 3600 150 GP100 2-11 1LE22213AC216AA3 1200 30 GP100 2-10 1LE22214DA213AA3 3600 150 GP100 2-17 1LE22213AD113AA3 900 20 GP100 2-16 1LE22214DA312AA3 3600 200 GP100 2-11 1LE22213AD116AA3 900 20 GP100 2-10 1LE22214DA313AA3 3600 200 GP100 2-17 1LE22213AD213AA3 900 25 GP100 2-16 1LE22214DB112AA3 1800 125 GP100 2-11 1LE22213AD216AA3 900 25 GP100 2-10 1LE22214DB113AA3 1800 125 GP100 2-17 1LE22213BA113AA3 3600 40 GP100 2-17 1LE22214DB212AA3 1800 150 GP100 2-11 1LE22213BA116AA3 3600 40 GP100 2-11 1LE22214DB213AA3 1800 150 GP100 2-17 1LE22213BA213AA3 3600 50 GP100 2-17 1LE22214DB312AA3 1800 200 GP100 2-11 1LE22213BA216AA3 3600 50 GP100 2-11 1LE22214DB313AA3 1800 200 GP100 2-17 1LE22213CB113AA3 1800 60 GP100 2-17 1LE22214DC112AA3 1200 100 GP100 2-11 1LE22213CB116AA3 1800 60 GP100 2-11 1LE22214DC212AA3 1200 125 GP100 2-11 1LE22213CB213AA3 1800 75 GP100 2-17 1LE22214DC213AA3 1200 125 GP100 2-17 1LE22213CB216AA3 1800 75 GP100 2-11 1LE22214DC312AA3 1200 150 GP100 2-11 1LE22213CC113AA3 1200 40 GP100 2-17 1LE22214DC313AA3 1200 150 GP100 2-17 1LE22213CC116AA3 1200 40 GP100 2-11 1LE22214DC512AA3 1200 200 GP100 2-11 1LE22213CC213AA3 1200 50 GP100 2-17 1LE22214DC513AA3 1200 200 GP100 2-17 1LE22213CC216AA3 1200 50 GP100 2-11 1LE22214EB112AA3 1800 125 GP100 2-11 1LE22213CD113AA3 900 30 GP100 2-16 1LE22214EB113AA3 1800 125 GP100 2-17 1LE22213CD116AA3 900 30 GP100 2-10 1LE22214EB212AA3 1800 150 GP100 2-11 1LE22213CD213AA3 900 40 GP100 2-17 1LE22214EB213AA3 1800 150 GP100 2-17 1LE22213CD216AA3 900 40 GP100 2-11 1LE22214EB312AA3 1800 200 GP100 2-11 1LE22213DA113AA3 3600 60 GP100 2-17 1LE22214EB313AA3 1800 200 GP100 2-17 1LE22213DA116AA3 3600 60 GP100 2-11 1LE22214EC212AA3 1200 125 GP100 2-11 1LE22213DA213AA3 3600 75 GP100 2-17 1LE22214EC213AA3 1200 125 GP100 2-17 1LE22213DA216AA3 3600 75 GP100 2-11 1LE22214EC312AA3 1200 150 GP100 2-11 1LE22214AB212AA3 1800 100 GP100 2-11 1LE22214EC313AA3 1200 150 GP100 2-17 1LE22214AB213AA3 1800 100 GP100 2-17 1LE22214EC512AA3 1200 200 GP100 2-11 1LE22214AC113AA3 1200 60 GP100 2-17 1LE22214EC513AA3 1200 200 GP100 2-17 1LE22214AC116AA3 1200 60 GP100 2-11 1LE23011AM240AA3 1800/900 1 / 0.25 SD10 MS 2-62 1LE22214AC213AA3 1200 75 GP100 2-17 1LE23011AM340AA3 1800/900 1.5 / 0.37 SD10 MS 2-62 1LE22214AC216AA3 1200 75 GP100 2-11 1LE23011CM140AA3 1800/900 2 / 0.5 SD10 MS 2-62 1LE22214BA212AA3 3600 100 GP100 2-11 1LE23011CM340AA3 1800/900 3 / 0.75 SD10 MS 2-62 1LE22214BA213AA3 3600 100 GP100 2-17 1LE23011CM440AA3 1800/900 5 / 1.2 SD10 MS 2-62 1LE22214BB212AA3 1800 100 GP100 2-11 1LE23012AM140AA3 1800/900 5 / 1.2 SD10 MS 2-62 6-5 Part Number Index 2014 Low Voltage AC Motors Selection and Pricing Guide General Dimensions RPM 1800 Typical Performance Data HP 1LE22214CB112AA3 Options Selection and Pricing Part Number 2-16 Special Features Detail Page GP100 Definite Purpose Motors Type 20 Hazardous Duty Motors RPM Severe Duty Motors HP 1200 General Purpose Motors Part Number 1LE22212CC213AA3 Part number index SIMOTICS NEMA motors Part Number HP RPM Type Page Part Number HP RPM Type 1LE23012AM240AA3 1800/900 7.5 / 1.9 SD10 MS 2-62 1LE23111AB414GA3 1800 2 SD100 Page 2-27 1LE23012BM140AA3 1800/900 10 / 2.5 SD10 MS 2-62 1LE23111AC314AA3 1200 1 SD100 2-26 1LE23012BM240AA3 1800/900 15 / 3.7 SD10 MS 2-62 1LE23111AC314GA3 1200 1 SD100 2-27 1LE23012CM140AA3 1800/900 20 / 5 SD10 MS 2-62 1LE23111CA114AA3 3600 3 SD100 2-26 1LE23012CM140AA3 1800/900 20 / 5 SD10 MS 2-62 1LE23111CA114GA3 3600 3 SD100 2-27 1LE23012CM240AA3 1800/900 25 / 6.2 SD10 MS 2-62 1LE23111CA314AA3 3600 5 SD100 2-26 1LE23012CM244AA3 1800/900 25 / 6.2 SD10 MS 2-62 1LE23111CA314GA3 3600 5 SD100 2-27 1LE23013AM140AA3 1800/900 30 / 7.5 SD10 MS 2-62 1LE23111CB114AA3 1800 3 SD100 2-26 1LE23013AM144AA3 1800/900 30 / 7.5 SD10 MS 2-62 1LE23111CB114GA3 1800 3 SD100 2-27 1LE23013AM240AA3 1800/900 40 / 10 SD10 MS 2-62 1LE23111CB314AA3 1800 5 SD100 2-26 1LE23013AM244AA3 1800/900 40 / 10 SD10 MS 2-62 1LE23111CB314GA3 1800 5 SD100 2-27 1LE23013CM140AA3 1800/900 50 / 12 SD10 MS 2-62 1LE23112AA114AA3 3600 7.5 SD100 2-26 1LE23013CM144AA3 1800/900 50 / 12 SD10 MS 2-62 1LE23112AA114GA3 3600 7.5 SD100 2-27 1LE23013CM240AA3 1800/900 60 / 15 SD10 MS 2-62 1LE23112AA214AA3 3600 10 SD100 2-26 1LE23013CM244AA3 1800/900 60 / 15 SD10 MS 2-62 1LE23112AA214GA3 3600 10 SD100 2-27 1LE23014AM240AA3 1800/900 75 / 19 SD10 MS 2-62 1LE23112AB114AA3 1800 7.5 SD100 2-26 1LE23014AM244AA3 1800/900 75 / 19 SD10 MS 2-62 1LE23112AB114GA3 1800 7.5 SD100 2-27 1LE23014CM140AA3 1800/900 100 / 25 SD10 MS 2-62 1LE23112AB214AA3 1800 10 SD100 2-26 1LE23014CM240AA3 1800/900 125 / 31 SD10 MS 2-62 1LE23112AB214GA3 1800 10 SD100 2-27 1LE23014CM340AA3 1800/900 150 / 37 SD10 MS 2-62 1LE23112AC114AA3 1200 3 SD100 2-26 1LE23014CM540AA3 1800/900 200 / 50 SD10 MS 2-62 1LE23112AC114GA3 1200 3 SD100 2-27 1LE23014CM640AA3 1800/900 250 / 62.5 SD10 MS 2-62 1LE23112AC214AA3 1200 5 SD100 2-26 1LE23014DM140AA3 1800/900 100 / 25 SD10 MS 2-62 1LE23112AC214GA3 1200 5 SD100 2-27 1LE23014DM144AA3 1800/900 100 / 25 SD10 MS 2-62 1LE23112BA114AA3 3600 15 SD100 2-26 1LE23014DM240AA3 1800/900 125 / 31 SD10 MS 2-62 1LE23112BA114GA3 3600 15 SD100 2-27 1LE23014DM244AA3 1800/900 125 / 31 SD10 MS 2-62 1LE23112BA214AA3 3600 20 SD100 2-26 1LE23014DM340AA3 1800/900 150 / 37 SD10 MS 2-62 1LE23112BA214GA3 3600 20 SD100 2-27 1LE23014DM344AA3 1800/900 150 / 37 SD10 MS 2-62 1LE23112BB114AA3 1800 15 SD100 2-26 1LE23014DM540AA3 1800/900 200 / 50 SD10 MS 2-62 1LE23112BB114GA3 1800 15 SD100 2-27 1LE23014DM544AA3 1800/900 200 / 50 SD10 MS 2-62 1LE23112BB214AA3 1800 20 SD100 2-26 1LE23014DM640AA3 1800/900 250 / 62.5 SD10 MS 2-62 1LE23112BB214GA3 1800 20 SD100 2-27 1LE23014DM644AA3 1800/900 250 / 62.5 SD10 MS 2-62 1LE23112BC114AA3 1200 7.5 SD100 2-26 1LE23014EM140AA3 1800/900 100 / 25 SD10 MS 2-62 1LE23112BC114GA3 1200 7.5 SD100 2-27 1LE23014EM144AA3 1800/900 100 / 25 SD10 MS 2-62 1LE23112BC214AA3 1200 10 SD100 2-26 1LE23014EM240AA3 1800/900 125 / 31 SD10 MS 2-62 1LE23112BC214GA3 1200 10 SD100 2-27 1LE23014EM244AA3 1800/900 125 / 31 SD10 MS 2-62 1LE23211AA113AA3 3600 1 SD100 2-28 1LE23014EM340AA3 1800/900 150 / 37 SD10 MS 2-62 1LE23211AA113GA3 3600 1 SD100 2-31 1LE23014EM344AA3 1800/900 150 / 37 SD10 MS 2-62 1LE23211AA114AA3 3600 1 SD100 2-22 1LE23014EM540AA3 1800/900 200 / 50 SD10 MS 2-62 1LE23211AA114GA3 3600 1 SD100 2-25 1LE23014EM544AA3 1800/900 200 / 50 SD10 MS 2-62 1LE23211AA213AA3 3600 1.5 SD100 2-28 1LE23014EM640AA3 1800/900 250 / 62.5 SD10 MS 2-62 1LE23211AA213GA3 3600 1.5 SD100 2-31 1LE23014EM644AA3 1800/900 250 / 62.5 SD10 MS 2-62 1LE23211AA214AA3 3600 1.5 SD100 2-22 1LE23111AA214AA3 3600 1.5 SD100 2-26 1LE23211AA214GA3 3600 1.5 SD100 2-25 1LE23111AA214GA3 3600 1.5 SD100 2-27 1LE23211AA313AA3 3600 2 SD100 2-28 1LE23111AA314AA3 3600 2 SD100 2-26 1LE23211AA313GA3 3600 2 SD100 2-31 1LE23111AA314GA3 3600 2 SD100 2-27 1LE23211AA314AA3 3600 2 SD100 2-22 1LE23111AB214AA3 1800 1 SD100 2-26 1LE23211AA314GA3 3600 2 SD100 2-25 1LE23111AB214GA3 1800 1 SD100 2-27 1LE23211AB213AA3 1800 1 SD100 2-28 1LE23111AB314AA3 1800 1.5 SD100 2-26 1LE23211AB213GA3 1800 1 SD100 2-31 1LE23111AB314GA3 1800 1.5 SD100 2-27 1LE23211AB214AA3 1800 1 SD100 2-22 1LE23111AB414AA3 1800 2 SD100 2-26 1LE23211AB214GA3 1800 1 SD100 2-25 6-6 2014 Low Voltage AC Motors Selection and Pricing Guide Introduction Part number index SIMOTICS NEMA motors HP RPM Type Page Part Number HP RPM Type 1800 1.5 SD100 2-28 1LE23212AA214GA3 3600 10 SD100 Page 2-25 1LE23211AB313GA3 1800 1.5 SD100 2-31 1LE23212AB113AA3 1800 7.5 SD100 2-28 1LE23211AB314AA3 1800 1.5 SD100 2-22 1LE23212AB113GA3 1800 7.5 SD100 2-31 1LE23211AB314GA3 1800 1.5 SD100 2-25 1LE23212AB114AA3 1800 7.5 SD100 2-22 1800 2 SD100 2-28 1LE23212AB114GA3 1800 7.5 SD100 2-25 1800 2 SD100 2-31 1LE23212AB213AA3 1800 10 SD100 2-28 1LE23211AB414AA3 1800 2 SD100 2-22 1LE23212AB213GA3 1800 10 SD100 2-31 1LE23211AB414GA3 1800 2 SD100 2-25 1LE23212AB214AA3 1800 10 SD100 2-22 1200 1 SD100 2-28 1LE23212AB214GA3 1800 10 SD100 2-25 1200 1 SD100 2-31 1LE23212AC113AA3 1200 3 SD100 2-28 1LE23211AC314AA3 1200 1 SD100 2-22 1LE23212AC113GA3 1200 3 SD100 2-31 1LE23211AC314GA3 1200 1 SD100 2-25 1LE23212AC114AA3 1200 3 SD100 2-22 1LE23211CA113AA3 3600 3 SD100 2-28 1LE23212AC114GA3 1200 3 SD100 2-25 1LE23211CA113GA3 3600 3 SD100 2-31 1LE23212AC213AA3 1200 5 SD100 2-28 1LE23211CA114AA3 3600 3 SD100 2-22 1LE23212AC213GA3 1200 5 SD100 2-31 1LE23211CA114GA3 3600 3 SD100 2-25 1LE23212AC214AA3 1200 5 SD100 2-22 1LE23211CA313AA3 3600 5 SD100 2-28 1LE23212AC214GA3 1200 5 SD100 2-25 1LE23211CA313GA3 3600 5 SD100 2-31 1LE23212AD113AA3 900 2 SD100 2-28 3600 5 SD100 2-22 1LE23212AD113GA3 900 2 SD100 2-31 3600 5 SD100 2-25 1LE23212AD114AA3 900 2 SD100 2-22 1LE23211CB113AA3 1800 3 SD100 2-28 1LE23212AD114GA3 900 2 SD100 2-25 1LE23211CB113GA3 1800 3 SD100 2-31 1LE23212AD213AA3 900 3 SD100 2-28 1LE23211CB114AA3 1800 3 SD100 2-22 1LE23212AD213GA3 900 3 SD100 2-31 1LE23211CB114GA3 1800 3 SD100 2-25 1LE23212AD214AA3 900 3 SD100 2-22 1800 5 SD100 2-28 1LE23212AD214GA3 900 3 SD100 2-25 1800 5 SD100 2-31 1LE23212BA113AA3 3600 15 SD100 2-28 1LE23211CB314AA3 1800 5 SD100 2-22 1LE23212BA113GA3 3600 15 SD100 2-31 1LE23211CB314GA3 1800 5 SD100 2-25 1LE23212BA114AA3 3600 15 SD100 2-22 1LE23211CC113AA3 1200 1.5 SD100 2-28 1LE23212BA114GA3 3600 15 SD100 2-25 1LE23211CC113GA3 1200 1.5 SD100 2-31 1LE23212BA213AA3 3600 20 SD100 2-28 1200 1.5 SD100 2-22 1LE23212BA213GA3 3600 20 SD100 2-31 1200 1.5 SD100 2-25 1LE23212BA214AA3 3600 20 SD100 2-22 1LE23211CC313AA3 1200 2 SD100 2-28 1LE23212BA214GA3 3600 20 SD100 2-25 1LE23211CC313GA3 1200 2 SD100 2-31 1LE23212BB113AA3 1800 15 SD100 2-28 1200 2 SD100 2-22 1LE23212BB113GA3 1800 15 SD100 2-31 1200 2 SD100 2-25 1LE23212BB114AA3 1800 15 SD100 2-22 1LE23211CD113AA3 900 1 SD100 2-28 1LE23212BB114GA3 1800 15 SD100 2-25 1LE23211CD113GA3 900 1 SD100 2-31 1LE23212BB213AA3 1800 20 SD100 2-28 1LE23211CD114AA3 900 1 SD100 2-22 1LE23212BB213GA3 1800 20 SD100 2-31 1LE23211CD114GA3 900 1 SD100 2-25 1LE23212BB214AA3 1800 20 SD100 2-22 1LE23211CD313AA3 900 1.5 SD100 2-28 1LE23212BB214GA3 1800 20 SD100 2-25 1LE23211CD313GA3 900 1.5 SD100 2-31 1LE23212BC113AA3 1200 7.5 SD100 2-28 1LE23211CD314AA3 900 1.5 SD100 2-22 1LE23212BC113GA3 1200 7.5 SD100 2-31 1LE23211CD314GA3 900 1.5 SD100 2-25 1LE23212BC114AA3 1200 7.5 SD100 2-22 1LE23212AA113AA3 3600 7.5 SD100 2-28 1LE23212BC114GA3 1200 7.5 SD100 2-25 1LE23212AA113GA3 3600 7.5 SD100 2-31 1LE23212BC213AA3 1200 10 SD100 2-28 3600 7.5 SD100 2-22 1LE23212BC213GA3 1200 10 SD100 2-31 3600 7.5 SD100 2-25 1LE23212BC214AA3 1200 10 SD100 2-22 1LE23212AA213AA3 3600 10 SD100 2-28 1LE23212BC214GA3 1200 10 SD100 2-25 1LE23212AA213GA3 3600 10 SD100 2-31 1LE23212BD113AA3 900 5 SD100 2-28 1LE23212AA214AA3 3600 10 SD100 2-22 1LE23212BD113GA3 900 5 SD100 2-31 6-7 Part Number Index 2014 Low Voltage AC Motors Selection and Pricing Guide General Dimensions 1LE23212AA114AA3 1LE23212AA114GA3 Typical Performance Data 1LE23211CC314AA3 1LE23211CC314GA3 Options Selection and Pricing 1LE23211CC114AA3 1LE23211CC114GA3 Special Features Detail 1LE23211CB313AA3 1LE23211CB313GA3 Definite Purpose Motors 1LE23211CA314AA3 1LE23211CA314GA3 Hazardous Duty Motors 1LE23211AC313AA3 1LE23211AC313GA3 Severe Duty Motors 1LE23211AB413AA3 1LE23211AB413GA3 General Purpose Motors Part Number 1LE23211AB313AA3 Part number index SIMOTICS NEMA motors Part Number HP RPM Type Page Part Number HP RPM Type Page 1LE23212BD114AA3 900 5 SD100 2-22 1LE23213CC113AA3 1200 40 SD100 2-29 1LE23212BD114GA3 900 5 SD100 2-25 1LE23213CC212AA3 1200 50 SD100 2-23 1LE23212BD213AA3 900 7.5 SD100 2-28 1LE23213CC213AA3 1200 50 SD100 2-29 1LE23212BD213GA3 900 7.5 SD100 2-31 1LE23213CD112AA3 900 30 SD100 2-22 1LE23212BD214AA3 900 7.5 SD100 2-22 1LE23213CD113AA3 900 30 SD100 2-28 1LE23212BD214GA3 900 7.5 SD100 2-25 1LE23213CD212AA3 900 40 SD100 2-23 1LE23212CB112AA3 1800 25 SD100 2-22 1LE23213CD213AA3 900 40 SD100 2-29 1LE23212CB113AA3 1800 25 SD100 2-28 1LE23213DA112AA3 3600 60 SD100 2-23 1LE23212CB212AA3 1800 30 SD100 2-22 1LE23213DA113AA3 3600 60 SD100 2-29 1LE23212CB213AA3 1800 30 SD100 2-28 1LE23213DA212AA3 3600 75 SD100 2-23 1LE23212CC113AA3 1200 15 SD100 2-28 1LE23213DA213AA3 3600 75 SD100 2-29 1LE23212CC116AA3 1200 15 SD100 2-22 1LE23213DB112AA3 1800 60 SD100 2-23 1LE23212CC213AA3 1200 20 SD100 2-28 1LE23213DB113AA3 1800 60 SD100 2-29 1LE23212CC216AA3 1200 20 SD100 2-22 1LE23213DB212AA3 1800 75 SD100 2-23 1LE23212CD113AA3 900 10 SD100 2-28 1LE23213DB213AA3 1800 75 SD100 2-29 1LE23212CD116AA3 900 10 SD100 2-22 1LE23214AB212AA3 1800 100 SD100 2-23 1LE23212CD213AA3 900 15 SD100 2-28 1LE23214AB213AA3 1800 100 SD100 2-29 1LE23212CD216AA3 900 15 SD100 2-22 1LE23214AC112AA3 1200 60 SD100 2-23 1LE23212DA112AA3 3600 25 SD100 2-22 1LE23214AC113AA3 1200 60 SD100 2-29 1LE23212DA113AA3 3600 25 SD100 2-28 1LE23214AC212AA3 1200 75 SD100 2-23 1LE23212DA212AA3 3600 30 SD100 2-22 1LE23214AC213AA3 1200 75 SD100 2-29 1LE23212DA213AA3 3600 30 SD100 2-28 1LE23214AD112AA3 900 50 SD100 2-23 1LE23212DB112AA3 1800 25 SD100 2-22 1LE23214AD113AA3 900 50 SD100 2-29 1LE23212DB113AA3 1800 25 SD100 2-28 1LE23214AD212AA3 900 60 SD100 2-23 1LE23212DB212AA3 1800 30 SD100 2-22 1LE23214AD213AA3 900 60 SD100 2-29 1LE23212DB213AA3 1800 30 SD100 2-28 1LE23214BA212AA3 3600 100 SD100 2-23 1LE23213AB112AA3 1800 40 SD100 2-23 1LE23214BA213AA3 3600 100 SD100 2-29 1LE23213AB113AA3 1800 40 SD100 2-29 1LE23214BB212AA3 1800 100 SD100 2-23 1LE23213AB212AA3 1800 50 SD100 2-23 1LE23214BB213AA3 1800 100 SD100 2-29 1LE23213AB213AA3 1800 50 SD100 2-29 1LE23214CB112AA3 1800 125 SD100 2-23 1LE23213AC112AA3 1200 25 SD100 2-22 1LE23214CB113AA3 1800 125 SD100 2-29 1LE23213AC113AA3 1200 25 SD100 2-28 1LE23214CB212AA3 1800 150 SD100 2-24 1LE23213AC212AA3 1200 30 SD100 2-22 1LE23214CB213AA3 1800 150 SD100 2-30 1LE23213AC213AA3 1200 30 SD100 2-28 1LE23214CB312AA3 1800 200 SD100 2-24 1LE23213AD113AA3 900 20 SD100 2-28 1LE23214CB313AA3 1800 200 SD100 2-30 1LE23213AD116AA3 900 20 SD100 2-22 1LE23214CB512AA3 1800 250 SD100 2-24 1LE23213AD212AA3 900 25 SD100 2-22 1LE23214CB513AA3 1800 250 SD100 2-30 1LE23213AD213AA3 900 25 SD100 2-28 1LE23214CB612AA3 1800 300 SD100 2-24 1LE23213BA112AA3 3600 40 SD100 2-23 1LE23214CB613AA3 1800 300 SD100 2-30 1LE23213BA113AA3 3600 40 SD100 2-29 1LE23214CC112AA3 1200 100 SD100 2-23 1LE23213BA212AA3 3600 50 SD100 2-23 1LE23214CC113AA3 1200 100 SD100 2-29 1LE23213BA213AA3 3600 50 SD100 2-29 1LE23214CC212AA3 1200 125 SD100 2-23 1LE23213BB112AA3 1800 40 SD100 2-23 1LE23214CC213AA3 1200 125 SD100 2-29 1LE23213BB113AA3 1800 40 SD100 2-29 1LE23214CC312AA3 1200 150 SD100 2-24 1LE23213BB212AA3 1800 50 SD100 2-23 1LE23214CC313AA3 1200 150 SD100 2-30 1LE23213BB213AA3 1800 50 SD100 2-29 1LE23214CC512AA3 1200 200 SD100 2-24 1LE23213CB112AA3 1800 60 SD100 2-23 1LE23214CC513AA3 1200 200 SD100 2-30 1LE23213CB113AA3 1800 60 SD100 2-29 1LE23214CC612AA3 1200 250 SD100 2-24 1LE23213CB212AA3 1800 75 SD100 2-23 1LE23214CC613AA3 1200 250 SD100 2-30 1LE23213CB213AA3 1800 75 SD100 2-29 1LE23214CD112AA3 900 75 SD100 2-23 1LE23213CC112AA3 1200 40 SD100 2-23 1LE23214CD113AA3 900 75 SD100 2-29 6-8 2014 Low Voltage AC Motors Selection and Pricing Guide Introduction Part number index SIMOTICS NEMA motors HP RPM Type Page Part Number HP RPM Type Page 900 100 SD100 2-23 1LE23214EB513AA3 1800 250 SD100 2-30 1LE23214CD213AA3 900 100 SD100 2-29 1LE23214EB612AA3 1800 300 SD100 2-24 1LE23214CD312AA3 900 125 SD100 2-23 1LE23214EB613AA3 1800 300 SD100 2-30 1LE23214CD313AA3 900 125 SD100 2-29 1LE23214EC112AA3 1200 100 SD100 2-23 2-24 1LE23214EC113AA3 1200 100 SD100 2-29 2-30 1LE23214EC212AA3 1200 125 SD100 2-23 1LE23214DA112AA3 3600 125 SD100 2-23 1LE23214EC213AA3 1200 125 SD100 2-29 1LE23214DA113AA3 3600 125 SD100 2-29 1LE23214EC312AA3 1200 150 SD100 2-24 1LE23214DA212AA3 3600 150 SD100 2-24 1LE23214EC313AA3 1200 150 SD100 2-30 1LE23214DA213AA3 3600 150 SD100 2-30 1LE23214EC512AA3 1200 200 SD100 2-24 1LE23214DA312AA3 3600 200 SD100 2-24 1LE23214EC513AA3 1200 200 SD100 2-30 1LE23214DA313AA3 3600 200 SD100 2-30 1LE23214EC612AA3 1200 250 SD100 2-24 1LE23214DA512AA3 3600 250 SD100 2-24 1LE23214EC613AA3 1200 250 SD100 2-30 1LE23214DA513AA3 3600 250 SD100 2-30 1LE23214ED112AA3 900 75 SD100 2-23 1LE23214DA612AA3 3600 300 SD100 2-24 1LE23214ED113AA3 900 75 SD100 2-29 1LE23214DA613AA3 3600 300 SD100 2-30 1LE23214ED212AA3 900 100 SD100 2-23 1LE23214DB112AA3 1800 125 SD100 2-23 1LE23214ED213AA3 900 100 SD100 2-29 1LE23214DB113AA3 1800 125 SD100 2-29 1LE23214ED312AA3 900 125 SD100 2-23 1LE23214DB212AA3 1800 150 SD100 2-24 1LE23214ED313AA3 900 125 SD100 2-29 1LE23214DB213AA3 1800 150 SD100 2-30 1LE23214ED412AA3 900 150 SD100 2-24 1LE23214DB312AA3 1800 200 SD100 2-24 1LE23214ED413AA3 900 150 SD100 2-30 1LE23214DB313AA3 1800 200 SD100 2-30 1LE23214FB212AA3 1800 350 SD100 2-24 1LE23214DB512AA3 1800 250 SD100 2-24 1LE23214FB213AA3 1800 350 SD100 2-30 1LE23214DB513AA3 1800 250 SD100 2-30 1LE23214FB312AA3 1800 400 SD100 2-24 1LE23214DB612AA3 1800 300 SD100 2-24 1LE23214FB313AA3 1800 400 SD100 2-30 1LE23214DB613AA3 1800 300 SD100 2-30 1LE23214FC112AA3 1200 300 SD100 2-24 SD100 2-23 1LE23214FC113AA3 1200 300 SD100 2-30 SD100 2-29 1LE23214FD112AA3 900 200 SD100 2-24 1LE23214DC212AA3 1200 125 SD100 2-23 1LE23214FD113AA3 900 200 SD100 2-30 1LE23214DC213AA3 1200 125 SD100 2-29 1LE23214FD212AA3 900 250 SD100 2-24 1LE23214DC312AA3 1200 150 SD100 2-24 1LE23214FD213AA3 900 250 SD100 2-30 1LE23214DC313AA3 1200 150 SD100 2-30 1LE23214GA112AA3 3600 350 SD100 2-24 1LE23214DC512AA3 1200 200 SD100 2-24 1LE23214GA113AA3 3600 350 SD100 2-30 1LE23214DC513AA3 1200 200 SD100 2-30 1LE23214GA312AA3 3600 400 SD100 2-24 1LE23214DC612AA3 1200 250 SD100 2-24 1LE23214GA313AA3 3600 400 SD100 2-30 1LE23214DC613AA3 1200 250 SD100 2-30 1LE23214GB212AA3 1800 350 SD100 2-24 1LE23214DD112AA3 900 75 SD100 2-23 1LE23214GB213AA3 1800 350 SD100 2-30 1LE23214DD113AA3 900 75 SD100 2-29 1LE23214GB312AA3 1800 400 SD100 2-24 1LE23214DD212AA3 900 100 SD100 2-23 1LE23214GB313AA3 1800 400 SD100 2-30 1LE23214DD213AA3 900 100 SD100 2-29 1LE23214GD112AA3 900 200 SD100 2-24 1LE23214DD312AA3 900 125 SD100 2-23 1LE23214GD113AA3 900 200 SD100 2-30 1LE23214DD313AA3 900 125 SD100 2-29 1LE24111AA212AA3 3600 1.5 SD100IEEE841 2-39 1LE23214DD412AA3 900 150 SD100 2-24 1LE24111AA312AA3 3600 2 SD100IEEE841 2-39 1LE23214DD413AA3 900 150 SD100 2-30 1LE24111AB212AA3 1800 1 SD100IEEE841 2-39 1LE23214EB112AA3 1800 125 SD100 2-23 1LE24111AB312AA3 1800 1.5 SD100IEEE841 2-39 1LE23214EB113AA3 1800 125 SD100 2-29 1LE24111AB412AA3 1800 2 SD100IEEE841 2-39 1LE23214EB212AA3 1800 150 SD100 2-24 1LE24111AC312AA3 1200 1 SD100IEEE841 2-39 1LE23214EB213AA3 1800 150 SD100 2-30 1LE24111CA112AA3 3600 3 SD100IEEE841 2-39 1LE23214EB312AA3 1800 200 SD100 2-24 1LE24111CA312AA3 3600 5 SD100IEEE841 2-39 1LE23214EB313AA3 1800 200 SD100 2-30 1LE24111CB112AA3 1800 3 SD100IEEE841 2-39 1LE23214EB512AA3 1800 250 SD100 2-24 1LE24111CB312AA3 1800 5 SD100IEEE841 2-39 6-9 Part Number Index 2014 Low Voltage AC Motors Selection and Pricing Guide General Dimensions 100 100 Typical Performance Data 1200 1200 Options Selection and Pricing 1LE23214DC112AA3 1LE23214DC113AA3 Special Features Detail SD100 SD100 Definite Purpose Motors 150 150 Hazardous Duty Motors 900 900 Severe Duty Motors 1LE23214CD412AA3 1LE23214CD413AA3 General Purpose Motors Part Number 1LE23214CD212AA3 Part number index SIMOTICS NEMA motors Part Number HP RPM Type Page Part Number HP RPM Type Page 1LE24112AA112AA3 3600 7.5 SD100 IEEE841 2-39 1LE24211CB312GA3 1800 5 SD100 IEEE841 2-38 1LE24112AA212AA3 3600 10 SD100 IEEE841 2-39 1LE24211CB313AA3 1800 5 SD100 IEEE841 2-40 1LE24112AB112AA3 1800 7.5 SD100 IEEE841 2-39 1LE24211CB313GA3 1800 5 SD100 IEEE841 2-44 1LE24112AB212AA3 1800 10 SD100 IEEE841 2-39 1LE24211CC112AA3 1200 1.5 SD100 IEEE841 2-34 1LE24112AC112AA3 1200 3 SD100 IEEE841 2-39 1LE24211CC113AA3 1200 1.5 SD100 IEEE841 2-40 1LE24112AC212AA3 1200 5 SD100 IEEE841 2-39 1LE24211CC312AA3 1200 2 SD100 IEEE841 2-34 1LE24112BA112AA3 3600 15 SD100 IEEE841 2-39 1LE24211CC313AA3 1200 2 SD100 IEEE841 2-40 1LE24112BA212AA3 3600 20 SD100 IEEE841 2-39 1LE24211CD112AA3 900 1 SD100 IEEE841 2-34 1LE24112BB112AA3 1800 15 SD100 IEEE841 2-39 1LE24211CD113AA3 900 1 SD100 IEEE841 2-40 1LE24112BB212AA3 1800 20 SD100 IEEE841 2-39 1LE24211CD312AA3 900 1.5 SD100 IEEE841 2-34 1LE24112BC112AA3 1200 7.5 SD100 IEEE841 2-39 1LE24211CD313AA3 900 1.5 SD100 IEEE841 2-40 1LE24112BC212AA3 1200 10 SD100 IEEE841 2-39 1LE24212AA112AA3 3600 7.5 SD100 IEEE841 2-34 1LE24211AA112AA3 3600 1 SD100 IEEE841 2-34 1LE24212AA112GA3 3600 7.5 SD100 IEEE841 2-38 1LE24211AA112GA3 3600 1 SD100 IEEE841 2-38 1LE24212AA113AA3 3600 7.5 SD100 IEEE841 2-40 1LE24211AA113AA3 3600 1 SD100 IEEE841 2-40 1LE24212AA113GA3 3600 7.5 SD100 IEEE841 2-44 1LE24211AA113GA3 3600 1 SD100 IEEE841 2-44 1LE24212AA212AA3 3600 10 SD100 IEEE841 2-34 1LE24211AA212AA3 3600 1.5 SD100 IEEE841 2-34 1LE24212AA212GA3 3600 10 SD100 IEEE841 2-38 1LE24211AA212GA3 3600 1.5 SD100 IEEE841 2-38 1LE24212AA213AA3 3600 10 SD100 IEEE841 2-40 1LE24211AA213AA3 3600 1.5 SD100 IEEE841 2-40 1LE24212AA213GA3 3600 10 SD100 IEEE841 2-44 1LE24211AA213GA3 3600 1.5 SD100 IEEE841 2-44 1LE24212AB112AA3 1800 7.5 SD100 IEEE841 2-34 1LE24211AA312AA3 3600 2 SD100 IEEE841 2-34 1LE24212AB112GA3 1800 7.5 SD100 IEEE841 2-38 1LE24211AA312GA3 3600 2 SD100 IEEE841 2-38 1LE24212AB113AA3 1800 7.5 SD100 IEEE841 2-40 1LE24211AA313AA3 3600 2 SD100 IEEE841 2-40 1LE24212AB113GA3 1800 7.5 SD100 IEEE841 2-44 1LE24211AA313GA3 3600 2 SD100 IEEE841 2-44 1LE24212AB212AA3 1800 10 SD100 IEEE841 2-34 1LE24211AB212AA3 1800 1 SD100 IEEE841 2-34 1LE24212AB212GA3 1800 10 SD100 IEEE841 2-38 1LE24211AB212GA3 1800 1 SD100 IEEE841 2-38 1LE24212AB213AA3 1800 10 SD100 IEEE841 2-40 1LE24211AB213AA3 1800 1 SD100 IEEE841 2-40 1LE24212AB213GA3 1800 10 SD100 IEEE841 2-44 1LE24211AB213GA3 1800 1 SD100 IEEE841 2-44 1LE24212AC112AA3 1200 3 SD100 IEEE841 2-34 1LE24211AB312AA3 1800 1.5 SD100 IEEE841 2-34 1LE24212AC113AA3 1200 3 SD100 IEEE841 2-40 1LE24211AB312GA3 1800 1.5 SD100 IEEE841 2-38 1LE24212AC212AA3 1200 5 SD100 IEEE841 2-34 1LE24211AB313AA3 1800 1.5 SD100 IEEE841 2-40 1LE24212AC213AA3 1200 5 SD100 IEEE841 2-40 1LE24211AB313GA3 1800 1.5 SD100 IEEE841 2-44 1LE24212AD112AA3 900 2 SD100 IEEE841 2-34 1LE24211AB412AA3 1800 2 SD100 IEEE841 2-34 1LE24212AD113AA3 900 2 SD100 IEEE841 2-40 1LE24211AB412GA3 1800 2 SD100 IEEE841 2-38 1LE24212AD212AA3 900 3 SD100 IEEE841 2-34 1LE24211AB413AA3 1800 2 SD100 IEEE841 2-40 1LE24212AD213AA3 900 3 SD100 IEEE841 2-40 1LE24211AB413GA3 1800 2 SD100 IEEE841 2-44 1LE24212BA112AA3 3600 15 SD100 IEEE841 2-34 1LE24211AC312AA3 1200 1 SD100 IEEE841 2-34 1LE24212BA112GA3 3600 15 SD100 IEEE841 2-38 1LE24211AC313AA3 1200 1 SD100 IEEE841 2-40 1LE24212BA113AA3 3600 15 SD100 IEEE841 2-40 1LE24211CA112AA3 3600 3 SD100 IEEE841 2-34 1LE24212BA113GA3 3600 15 SD100 IEEE841 2-44 1LE24211CA112GA3 3600 3 SD100 IEEE841 2-38 1LE24212BA212AA3 3600 20 SD100 IEEE841 2-34 1LE24211CA113AA3 3600 3 SD100 IEEE841 2-40 1LE24212BA212GA3 3600 20 SD100 IEEE841 2-38 1LE24211CA113GA3 3600 3 SD100 IEEE841 2-44 1LE24212BA213AA3 3600 20 SD100 IEEE841 2-40 1LE24211CA312AA3 3600 5 SD100 IEEE841 2-34 1LE24212BA213GA3 3600 20 SD100 IEEE841 2-44 1LE24211CA312GA3 3600 5 SD100 IEEE841 2-38 1LE24212BB112AA3 1800 15 SD100 IEEE841 2-34 1LE24211CA313AA3 3600 5 SD100 IEEE841 2-40 1LE24212BB112GA3 1800 15 SD100 IEEE841 2-38 1LE24211CA313GA3 3600 5 SD100 IEEE841 2-44 1LE24212BB113AA3 1800 15 SD100 IEEE841 2-40 1LE24211CB112AA3 1800 3 SD100 IEEE841 2-34 1LE24212BB113GA3 1800 15 SD100 IEEE841 2-44 1LE24211CB112GA3 1800 3 SD100 IEEE841 2-38 1LE24212BB212AA3 1800 20 SD100 IEEE841 2-34 1LE24211CB113AA3 1800 3 SD100 IEEE841 2-40 1LE24212BB212GA3 1800 20 SD100 IEEE841 2-38 1LE24211CB113GA3 1800 3 SD100 IEEE841 2-44 1LE24212BB213AA3 1800 20 SD100 IEEE841 2-40 1LE24211CB312AA3 1800 5 SD100 IEEE841 2-34 1LE24212BB213GA3 1800 20 SD100 IEEE841 2-44 6-10 2014 Low Voltage AC Motors Selection and Pricing Guide Introduction Part number index SIMOTICS NEMA motors Type Page 75 SD100 IEEE841 2-41 1LE24212BC113AA3 1200 7.5 SD100 IEEE841 2-40 1LE24213CC112AA3 1200 40 SD100 IEEE841 2-35 1LE24212BC212AA3 1200 10 SD100 IEEE841 2-34 1LE24213CC113AA3 1200 40 SD100 IEEE841 2-41 1LE24212BC213AA3 1200 10 SD100 IEEE841 2-40 1LE24213CC212AA3 1200 50 SD100 IEEE841 2-35 1LE24212BD112AA3 900 5 SD100 IEEE841 2-34 1LE24213CC213AA3 1200 50 SD100 IEEE841 2-41 1LE24212BD113AA3 900 5 SD100 IEEE841 2-40 1LE24213CD112AA3 900 30 SD100 IEEE841 2-35 1LE24212BD212AA3 900 7.5 SD100 IEEE841 2-34 1LE24213CD113AA3 900 30 SD100 IEEE841 2-41 1LE24212BD213AA3 900 7.5 SD100 IEEE841 2-40 1LE24213CD212AA3 900 40 SD100 IEEE841 2-35 1LE24212CB112AA3 1800 25 SD100 IEEE841 2-35 1LE24213CD213AA3 900 40 SD100 IEEE841 2-41 1LE24212CB113AA3 1800 25 SD100 IEEE841 2-41 1LE24213DA112AA3 3600 60 SD100 IEEE841 2-35 1LE24212CB212AA3 1800 30 SD100 IEEE841 2-35 1LE24213DA113AA3 3600 60 SD100 IEEE841 2-41 1LE24212CB213AA3 1800 30 SD100 IEEE841 2-41 1LE24213DA212AA3 3600 75 SD100 IEEE841 2-35 1LE24212CC112AA3 1200 15 SD100 IEEE841 2-34 1LE24213DA213AA3 3600 75 SD100 IEEE841 2-41 1LE24212CC113AA3 1200 15 SD100 IEEE841 2-40 1LE24213DB112AA3 1800 60 SD100 IEEE841 2-35 1LE24212CC212AA3 1200 20 SD100 IEEE841 2-34 1LE24213DB113AA3 1800 60 SD100 IEEE841 2-41 1LE24212CC213AA3 1200 20 SD100 IEEE841 2-40 1LE24213DB212AA3 1800 75 SD100 IEEE841 2-35 1LE24212CD112AA3 900 10 SD100 IEEE841 2-34 1LE24213DB213AA3 1800 75 SD100 IEEE841 2-41 1LE24212CD113AA3 900 10 SD100 IEEE841 2-40 1LE24214AB212AA3 1800 100 SD100 IEEE841 2-36 1LE24212CD212AA3 900 15 SD100 IEEE841 2-34 1LE24214AB213AA3 1800 100 SD100 IEEE841 2-42 1LE24212CD213AA3 900 15 SD100 IEEE841 2-40 1LE24214AC112AA3 1200 60 SD100 IEEE841 2-35 1LE24212DA112AA3 3600 25 SD100 IEEE841 2-35 1LE24214AC113AA3 1200 60 SD100 IEEE841 2-41 1LE24212DA113AA3 3600 25 SD100 IEEE841 2-41 1LE24214AC212AA3 1200 75 SD100 IEEE841 2-35 1LE24212DA212AA3 3600 30 SD100 IEEE841 2-35 1LE24214AC213AA3 1200 75 SD100 IEEE841 2-41 1LE24212DA213AA3 3600 30 SD100 IEEE841 2-41 1LE24214AD112AA3 900 50 SD100 IEEE841 2-35 1LE24212DB112AA3 1800 25 SD100 IEEE841 2-35 1LE24214AD113AA3 900 50 SD100 IEEE841 2-41 1LE24212DB113AA3 1800 25 SD100 IEEE841 2-41 1LE24214AD212AA3 900 60 SD100 IEEE841 2-35 1LE24212DB212AA3 1800 30 SD100 IEEE841 2-35 1LE24214AD213AA3 900 60 SD100 IEEE841 2-41 1LE24212DB213AA3 1800 30 SD100 IEEE841 2-41 1LE24214BA212AA3 3600 100 SD100 IEEE841 2-36 1LE24213AB112AA3 1800 40 SD100 IEEE841 2-35 1LE24214BA213AA3 3600 100 SD100 IEEE841 2-42 1LE24213AB113AA3 1800 40 SD100 IEEE841 2-41 1LE24214BB212AA3 1800 100 SD100 IEEE841 2-36 1LE24213AB212AA3 1800 50 SD100 IEEE841 2-35 1LE24214BB213AA3 1800 100 SD100 IEEE841 2-42 1LE24213AB213AA3 1800 50 SD100 IEEE841 2-41 1LE24214CB112AA3 1800 125 SD100 IEEE841 2-36 1LE24213AC112AA3 1200 25 SD100 IEEE841 2-35 1LE24214CB113AA3 1800 125 SD100 IEEE841 2-42 1LE24213AC113AA3 1200 25 SD100 IEEE841 2-41 1LE24214CB212AA3 1800 150 SD100 IEEE841 2-36 1LE24213AC212AA3 1200 30 SD100 IEEE841 2-35 1LE24214CB213AA3 1800 150 SD100 IEEE841 2-42 1LE24213AC213AA3 1200 30 SD100 IEEE841 2-41 1LE24214CB312AA3 1800 200 SD100 IEEE841 2-36 1LE24213AD112AA3 900 20 SD100 IEEE841 2-34 1LE24214CB313AA3 1800 200 SD100 IEEE841 2-42 1LE24213AD113AA3 900 20 SD100 IEEE841 2-40 1LE24214CB512AA3 1800 250 SD100 IEEE841 2-37 1LE24213AD212AA3 900 25 SD100 IEEE841 2-35 1LE24214CB513AA3 1800 250 SD100 IEEE841 2-43 1LE24213AD213AA3 900 25 SD100 IEEE841 2-41 1LE24214CC112AA3 1200 100 SD100 IEEE841 2-36 1LE24213BA112AA3 3600 40 SD100 IEEE841 2-35 1LE24214CC113AA3 1200 100 SD100 IEEE841 2-42 1LE24213BA113AA3 3600 40 SD100 IEEE841 2-41 1LE24214CC212AA3 1200 125 SD100 IEEE841 2-36 1LE24213BA212AA3 3600 50 SD100 IEEE841 2-35 1LE24214CC213AA3 1200 125 SD100 IEEE841 2-42 1LE24213BA213AA3 3600 50 SD100 IEEE841 2-41 1LE24214CC312AA3 1200 150 SD100 IEEE841 2-36 1LE24213BB112AA3 1800 40 SD100 IEEE841 2-35 1LE24214CC313AA3 1200 150 SD100 IEEE841 2-42 1LE24213BB113AA3 1800 40 SD100 IEEE841 2-41 1LE24214CC512AA3 1200 200 SD100 IEEE841 2-36 1LE24213BB212AA3 1800 50 SD100 IEEE841 2-35 1LE24214CC513AA3 1200 200 SD100 IEEE841 2-42 1LE24213BB213AA3 1800 50 SD100 IEEE841 2-41 1LE24214CC612AA3 1200 250 SD100 IEEE841 2-37 1LE24213CB112AA3 1800 60 SD100 IEEE841 2-35 1LE24214CC613AA3 1200 250 SD100 IEEE841 2-43 1LE24213CB113AA3 1800 60 SD100 IEEE841 2-41 1LE24214CD112AA3 900 75 SD100 IEEE841 2-35 1LE24213CB212AA3 1800 75 SD100 IEEE841 2-35 1LE24214CD113AA3 900 75 SD100 IEEE841 2-41 6-11 Part Number Index 2014 Low Voltage AC Motors Selection and Pricing Guide General Dimensions RPM 1800 Typical Performance Data HP 1LE24213CB213AA3 Options Selection and Pricing Part Number 2-34 Special Features Detail Page SD100 IEEE841 Definite Purpose Motors Type 7.5 Hazardous Duty Motors RPM Severe Duty Motors HP 1200 General Purpose Motors Part Number 1LE24212BC112AA3 Part number index SIMOTICS NEMA motors Part Number HP RPM Type Page Part Number HP RPM Type Page 1LE24214CD212AA3 900 100 SD100 IEEE841 2-36 1LE24214EC113AA3 1200 100 SD100 IEEE841 2-42 1LE24214CD213AA3 900 100 SD100 IEEE841 2-42 1LE24214EC212AA3 1200 125 SD100 IEEE841 2-36 1LE24214CD312AA3 900 125 SD100 IEEE841 2-36 1LE24214EC213AA3 1200 125 SD100 IEEE841 2-42 1LE24214CD313AA3 900 125 SD100 IEEE841 2-42 1LE24214EC312AA3 1200 150 SD100 IEEE841 2-36 1LE24214CD512AA3 900 150 SD100 IEEE841 2-36 1LE24214EC313AA3 1200 150 SD100 IEEE841 2-42 1LE24214CD513AA3 900 150 SD100 IEEE841 2-42 1LE24214EC512AA3 1200 200 SD100 IEEE841 2-36 1LE24214DA112AA3 3600 125 SD100 IEEE841 2-36 1LE24214EC513AA3 1200 200 SD100 IEEE841 2-42 1LE24214DA113AA3 3600 125 SD100 IEEE841 2-42 1LE24214EC612AA3 1200 250 SD100 IEEE841 2-37 1LE24214DA212AA3 3600 150 SD100 IEEE841 2-36 1LE24214EC613AA3 1200 250 SD100 IEEE841 2-43 1LE24214DA213AA3 3600 150 SD100 IEEE841 2-42 1LE24214ED112AA3 900 75 SD100 IEEE841 2-35 1LE24214DA312AA3 3600 200 SD100 IEEE841 2-36 1LE24214ED113AA3 900 75 SD100 IEEE841 2-41 1LE24214DA313AA3 3600 200 SD100 IEEE841 2-42 1LE24214ED212AA3 900 100 SD100 IEEE841 2-36 1LE24214DA512AA3 3600 250 SD100 IEEE841 2-37 1LE24214ED213AA3 900 100 SD100 IEEE841 2-42 1LE24214DA513AA3 3600 250 SD100 IEEE841 2-43 1LE24214ED312AA3 900 125 SD100 IEEE841 2-36 1LE24214DA612AA3 3600 300 SD100 IEEE841 2-37 1LE24214ED313AA3 900 125 SD100 IEEE841 2-42 1LE24214DA613AA3 3600 300 SD100 IEEE841 2-43 1LE24214ED512AA3 900 150 SD100 IEEE841 2-36 1LE24214DB112AA3 1800 125 SD100 IEEE841 2-36 1LE24214ED513AA3 900 150 SD100 IEEE841 2-42 1LE24214DB113AA3 1800 125 SD100 IEEE841 2-42 1LE24214FB112AA3 1800 300 SD100 IEEE841 2-37 1LE24214DB212AA3 1800 150 SD100 IEEE841 2-36 1LE24214FB113AA3 1800 300 SD100 IEEE841 2-43 1LE24214DB213AA3 1800 150 SD100 IEEE841 2-42 1LE24214FB212AA3 1800 350 SD100 IEEE841 2-37 1LE24214DB312AA3 1800 200 SD100 IEEE841 2-36 1LE24214FB213AA3 1800 350 SD100 IEEE841 2-43 1LE24214DB313AA3 1800 200 SD100 IEEE841 2-42 1LE24214FB312AA3 1800 400 SD100 IEEE841 2-37 1LE24214DB512AA3 1800 250 SD100 IEEE841 2-37 1LE24214FB313AA3 1800 400 SD100 IEEE841 2-43 1LE24214DB513AA3 1800 250 SD100 IEEE841 2-43 1LE24214FC112AA3 1200 300 SD100 IEEE841 2-37 1LE24214DC112AA3 1200 100 SD100 IEEE841 2-36 1LE24214FC113AA3 1200 300 SD100 IEEE841 2-43 1LE24214DC113AA3 1200 100 SD100 IEEE841 2-42 1LE24214FD112AA3 900 200 SD100 IEEE841 2-36 1LE24214DC212AA3 1200 125 SD100 IEEE841 2-36 1LE24214FD113AA3 900 200 SD100 IEEE841 2-42 1LE24214DC213AA3 1200 125 SD100 IEEE841 2-42 1LE24214FD212AA3 900 250 SD100 IEEE841 2-37 1LE24214DC312AA3 1200 150 SD100 IEEE841 2-36 1LE24214FD213AA3 900 250 SD100 IEEE841 2-43 1LE24214DC313AA3 1200 150 SD100 IEEE841 2-42 1LE24214GA112AA3 3600 350 SD100 IEEE841 2-37 1LE24214DC512AA3 1200 200 SD100 IEEE841 2-36 1LE24214GA113AA3 3600 350 SD100 IEEE841 2-43 1LE24214DC513AA3 1200 200 SD100 IEEE841 2-42 1LE24214GA312AA3 3600 400 SD100 IEEE841 2-37 1LE24214DC612AA3 1200 250 SD100 IEEE841 2-37 1LE24214GA313AA3 3600 400 SD100 IEEE841 2-43 1LE24214DC613AA3 1200 250 SD100 IEEE841 2-43 1LE24214GB112AA3 1800 300 SD100 IEEE841 2-37 1LE24214DD112AA3 900 75 SD100 IEEE841 2-35 1LE24214GB113AA3 1800 300 SD100 IEEE841 2-43 1LE24214DD113AA3 900 75 SD100 IEEE841 2-41 1LE24214GB212AA3 1800 350 SD100 IEEE841 2-37 1LE24214DD212AA3 900 100 SD100 IEEE841 2-36 1LE24214GB213AA3 1800 350 SD100 IEEE841 2-43 1LE24214DD213AA3 900 100 SD100 IEEE841 2-42 1LE24214GB312AA3 1800 400 SD100 IEEE841 2-37 1LE24214DD312AA3 900 125 SD100 IEEE841 2-36 1LE24214GB313AA3 1800 400 SD100 IEEE841 2-43 1LE24214DD313AA3 900 125 SD100 IEEE841 2-42 1LE24214GC112AA3 1200 300 SD100 IEEE841 2-37 1LE24214DD512AA3 900 150 SD100 IEEE841 2-36 1LE24214GC113AA3 1200 300 SD100 IEEE841 2-43 1LE24214DD513AA3 900 150 SD100 IEEE841 2-42 1LE24221CB312AA3 1800 5 SD661 2-46 1LE24214EB112AA3 1800 125 SD100 IEEE841 2-36 1LE24221CB313AA3 1800 5 SD661 2-46 1LE24214EB113AA3 1800 125 SD100 IEEE841 2-42 1LE24222AB112AA3 1800 7.5 SD661 2-46 1LE24214EB212AA3 1800 150 SD100 IEEE841 2-36 1LE24222AB113AA3 1800 7.5 SD661 2-46 1LE24214EB213AA3 1800 150 SD100 IEEE841 2-42 1LE24222AB212AA3 1800 10 SD661 2-46 1LE24214EB312AA3 1800 200 SD100 IEEE841 2-36 1LE24222AB213AA3 1800 10 SD661 2-46 1LE24214EB313AA3 1800 200 SD100 IEEE841 2-42 1LE24222BB112AA3 1800 15 SD661 2-46 1LE24214EB512AA3 1800 250 SD100 IEEE841 2-37 1LE24222BB113AA3 1800 15 SD661 2-46 1LE24214EB513AA3 1800 250 SD100 IEEE841 2-43 1LE24222BB212AA3 1800 20 SD661 2-46 1LE24214EC112AA3 1200 100 SD100 IEEE841 2-36 1LE24222BB213AA3 1800 20 SD661 2-46 6-12 2014 Low Voltage AC Motors Selection and Pricing Guide Introduction Part number index SIMOTICS NEMA motors Type Page 1.5 XP100 2-52 1LE24222CB113AA3 1800 25 SD661 2-46 1MB21211CD314AG3 900 1.5 XP100 2-48 1LE24222CB212AA3 1800 30 SD661 2-46 1MB21211CD316LG3 900 1.5 XP100 2-51 1LE24222CB213AA3 1800 30 SD661 2-46 1MB21212AA113AG3 3600 7.5 XP100 2-52 1LE24223AB112AA3 1800 40 SD661 2-46 1MB21212AA114AG3 3600 7.5 XP100 2-48 1LE24223AB113AA3 1800 40 SD661 2-46 1MB21212AA116LG3 3600 7.5 XP100 2-51 1LE24223AB212AA3 1800 50 SD661 2-46 1MB21212AA213AG3 3600 10 XP100 2-52 1LE24223AB213AA3 1800 50 SD661 2-46 1MB21212AA214AG3 3600 10 XP100 2-48 1LE24223CB112AA3 1800 60 SD661 2-46 1MB21212AA216LG3 3600 10 XP100 2-51 1LE24223CB113AA3 1800 60 SD661 2-46 1MB21212AB113AG3 1800 7.5 XP100 2-52 1LE24223CB212AA3 1800 75 SD661 2-46 1MB21212AB114AG3 1800 7.5 XP100 2-48 1LE24223CB213AA3 1800 75 SD661 2-46 1MB21212AB116LG3 1800 7.5 XP100 2-51 1MB21211AA213AG3 3600 1.5 XP100 2-52 1MB21212AB213AG3 1800 10 XP100 2-52 1MB21211AA214AG3 3600 1.5 XP100 2-48 1MB21212AB214AG3 1800 10 XP100 2-48 1MB21211AA216LG3 3600 1.5 XP100 2-51 1MB21212AB216LG3 1800 10 XP100 2-51 1MB21211AA313AG3 3600 2 XP100 2-52 1MB21212AC113AG3 1200 3 XP100 2-52 1MB21211AA314AG3 3600 2 XP100 2-48 1MB21212AC114AG3 1200 3 XP100 2-48 1MB21211AA316LG3 3600 2 XP100 2-51 1MB21212AC116LG3 1200 3 XP100 2-51 1MB21211AB213AG3 1800 1 XP100 2-52 1MB21212AC213AG3 1200 5 XP100 2-52 1MB21211AB214AG3 1800 1 XP100 2-48 1MB21212AC214AG3 1200 5 XP100 2-48 1MB21211AB216LG3 1800 1 XP100 2-51 1MB21212AC216LG3 1200 5 XP100 2-51 1MB21211AB313AG3 1800 1.5 XP100 2-52 1MB21212AD113AG3 900 2 XP100 2-52 1MB21211AB314AG3 1800 1.5 XP100 2-48 1MB21212AD114AG3 900 2 XP100 2-48 1MB21211AB316LG3 1800 1.5 XP100 2-51 1MB21212AD116LG3 900 2 XP100 2-51 1MB21211AB413AG3 1800 2 XP100 2-52 1MB21212AD213AG3 900 3 XP100 2-52 1MB21211AB414AG3 1800 2 XP100 2-48 1MB21212AD214AG3 900 3 XP100 2-48 1MB21211AB416LG3 1800 2 XP100 2-51 1MB21212AD216LG3 900 3 XP100 2-51 1MB21211AC313AG3 1200 1 XP100 2-52 1MB21212BA113AG3 3600 15 XP100 2-52 1MB21211AC314AG3 1200 1 XP100 2-48 1MB21212BA114AG3 3600 15 XP100 2-48 1MB21211AC316LG3 1200 1 XP100 2-51 1MB21212BA116LG3 3600 15 XP100 2-51 1MB21211CA113AG3 3600 3 XP100 2-52 1MB21212BA213AG3 3600 20 XP100 2-52 1MB21211CA114AG3 3600 3 XP100 2-48 1MB21212BA214AG3 3600 20 XP100 2-48 1MB21211CA116LG3 3600 3 XP100 2-51 1MB21212BA216LG3 3600 20 XP100 2-51 1MB21211CA313AG3 3600 5 XP100 2-52 1MB21212BB113AG3 1800 15 XP100 2-52 1MB21211CA314AG3 3600 5 XP100 2-48 1MB21212BB114AG3 1800 15 XP100 2-48 1MB21211CA316LG3 3600 5 XP100 2-51 1MB21212BB116LG3 1800 15 XP100 2-51 1MB21211CB113AG3 1800 3 XP100 2-52 1MB21212BB213AG3 1800 20 XP100 2-52 1MB21211CB114AG3 1800 3 XP100 2-48 1MB21212BB214AG3 1800 20 XP100 2-48 1MB21211CB116LG3 1800 3 XP100 2-51 1MB21212BB216LG3 1800 20 XP100 2-51 1MB21211CB313AG3 1800 5 XP100 2-52 1MB21212BC113AG3 1200 7.5 XP100 2-52 1MB21211CB314AG3 1800 5 XP100 2-48 1MB21212BC114AG3 1200 7.5 XP100 2-48 1MB21211CB316LG3 1800 5 XP100 2-51 1MB21212BC116LG3 1200 7.5 XP100 2-51 1MB21211CC113AG3 1200 1.5 XP100 2-52 1MB21212BC213AG3 1200 10 XP100 2-52 1MB21211CC114AG3 1200 1.5 XP100 2-48 1MB21212BC214AG3 1200 10 XP100 2-48 1MB21211CC116LG3 1200 1.5 XP100 2-51 1MB21212BC216LG3 1200 10 XP100 2-51 1MB21211CC313AG3 1200 2 XP100 2-52 1MB21212BD113AG3 900 5 XP100 2-52 1MB21211CC314AG3 1200 2 XP100 2-48 1MB21212BD114AG3 900 5 XP100 2-48 1MB21211CC316LG3 1200 2 XP100 2-51 1MB21212BD116LG3 900 5 XP100 2-51 1MB21211CD113AG3 900 1 XP100 2-52 1MB21212BD213AG3 900 7.5 XP100 2-52 1MB21211CD114AG3 900 1 XP100 2-48 1MB21212BD214AG3 900 7.5 XP100 2-48 1MB21211CD116LG3 900 1 XP100 2-51 1MB21212BD216LG3 900 7.5 XP100 2-51 6-13 Part Number Index 2014 Low Voltage AC Motors Selection and Pricing Guide General Dimensions RPM 900 Typical Performance Data HP 1MB21211CD313AG3 Options Selection and Pricing Part Number 2-46 Special Features Detail Page SD661 Definite Purpose Motors Type 25 Hazardous Duty Motors RPM Severe Duty Motors HP 1800 General Purpose Motors Part Number 1LE24222CB112AA3 Part number index SIMOTICS NEMA motors Part Number HP RPM Type Page Part Number HP RPM Type Page 1MB21212CB113AG3 1800 25 XP100 2-52 1MB21214AB216AG3 1800 100 XP100 2-49 1MB21212CB116AG3 1800 25 XP100 2-48 1MB21214AC113AG3 1200 60 XP100 2-53 1MB21212CB213AG3 1800 30 XP100 2-52 1MB21214AC116AG3 1200 60 XP100 2-49 1MB21212CB216AG3 1800 30 XP100 2-49 1MB21214AC213AG3 1200 75 XP100 2-53 1MB21212CC113AG3 1200 15 XP100 2-52 1MB21214AC216AG3 1200 75 XP100 2-49 1MB21212CC116AG3 1200 15 XP100 2-48 1MB21214AD113AG3 900 50 XP100 2-53 1MB21212CC116LG3 1200 15 XP100 2-51 1MB21214AD116AG3 900 50 XP100 2-49 1MB21212CC213AG3 1200 20 XP100 2-52 1MB21214AD213AG3 900 60 XP100 2-53 1MB21212CC216AG3 1200 20 XP100 2-48 1MB21214AD216AG3 900 60 XP100 2-49 1MB21212CC216LG3 1200 20 XP100 2-51 1MB21214BA213AG3 3600 100 XP100 2-53 1MB21212CD113AG3 900 10 XP100 2-52 1MB21214BA216AG3 3600 100 XP100 2-49 1MB21212CD116AG3 900 10 XP100 2-48 1MB21214CB112AG3 1800 125 XP100 2-49 1MB21212CD213AG3 900 15 XP100 2-52 1MB21214CB113AG3 1800 125 XP100 2-53 1MB21212CD216AG3 900 15 XP100 2-48 1MB21214CB212AG3 1800 150 XP100 2-49 1MB21212DA113AG3 3600 25 XP100 2-52 1MB21214CB213AG3 1800 150 XP100 2-53 1MB21212DA116AG3 3600 25 XP100 2-48 1MB21214CB312AG3 1800 200 XP100 2-50 1MB21212DA213AG3 3600 30 XP100 2-52 1MB21214CB313AG3 1800 200 XP100 2-53 1MB21212DA216AG3 3600 30 XP100 2-49 1MB21214CB512AG3 1800 250 XP100 2-50 1MB21213AB113AG3 1800 40 XP100 2-53 1MB21214CB612AG3 1800 300 XP100 2-50 1MB21213AB116AG3 1800 40 XP100 2-49 1MB21214CC113AG3 1200 100 XP100 2-53 1200 100 XP100 2-49 1MB21213AB213AG3 1800 50 XP100 2-53 1MB21214CC116AG3 1MB21213AB216AG3 1800 50 XP100 2-49 1MB21214CC212AG3 1200 125 XP100 2-49 1MB21213AC113AG3 1200 25 XP100 2-52 1MB21214CC213AG3 1200 125 XP100 2-53 1MB21213AC116AG3 1200 25 XP100 2-48 1MB21214CC312AG3 1200 150 XP100 2-49 1MB21213AC213AG3 1200 30 XP100 2-52 1MB21214CC313AG3 1200 150 XP100 2-53 1MB21213AC216AG3 1200 30 XP100 2-49 1MB21214CC512AG3 1200 200 XP100 2-50 1MB21213AD113AG3 900 20 XP100 2-52 1MB21214CC513AG3 1200 200 XP100 2-53 1MB21213AD116AG3 900 20 XP100 2-48 1MB21214CD113AG3 900 75 XP100 2-53 1MB21213AD213AG3 900 25 XP100 2-52 1MB21214CD116AG3 900 75 XP100 2-49 1MB21213AD216AG3 900 25 XP100 2-48 1MB21214CD213AG3 900 100 XP100 2-53 1MB21213BA113AG3 3600 40 XP100 2-53 1MB21214CD216AG3 900 100 XP100 2-49 1MB21213BA116AG3 3600 40 XP100 2-49 1MB21214CD312AG3 900 125 XP100 2-49 1MB21213BA213AG3 3600 50 XP100 2-53 1MB21214CD313AG3 900 125 XP100 2-53 1MB21213BA216AG3 3600 50 XP100 2-49 1MB21214CD512AG3 900 150 XP100 2-49 1MB21213CB113AG3 1800 60 XP100 2-53 1MB21214CD513AG3 900 150 XP100 2-53 1MB21213CB116AG3 1800 60 XP100 2-49 1MB21214CD612AG3 900 200 XP100 2-50 1MB21213CB213AG3 1800 75 XP100 2-53 1MB21214CD613AG3 900 200 XP100 2-53 1MB21213CB216AG3 1800 75 XP100 2-49 1MB21214DA112AG3 3600 125 XP100 2-49 1MB21213CC113AG3 1200 40 XP100 2-53 1MB21214DA113AG3 3600 125 XP100 2-53 1MB21213CC116AG3 1200 40 XP100 2-49 1MB21214DA212AG3 3600 150 XP100 2-49 1MB21213CC213AG3 1200 50 XP100 2-53 1MB21214DA213AG3 3600 150 XP100 2-53 1MB21213CC216AG3 1200 50 XP100 2-49 1MB21214DA312AG3 3600 200 XP100 2-50 1MB21213CD113AG3 900 30 XP100 2-52 1MB21214DA313AG3 3600 200 XP100 2-53 1MB21213CD116AG3 900 30 XP100 2-49 1MB21214DA512AG3 3600 250 XP100 2-50 1MB21213CD213AG3 900 40 XP100 2-53 1MB21214DA513AG3 3600 250 XP100 2-53 1MB21213CD216AG3 900 40 XP100 2-49 1MB21214DA612AG3 3600 300 XP100 2-50 1MB21213DA113AG3 3600 60 XP100 2-53 1MB21214DA613AG3 3600 300 XP100 2-53 1MB21213DA116AG3 3600 60 XP100 2-49 1MB21214DB112AG3 1800 125 XP100 2-49 1800 125 XP100 2-53 1MB21213DA213AG3 3600 75 XP100 2-53 1MB21214DB113AG3 1MB21213DA216AG3 3600 75 XP100 2-49 1MB21214DB212AG3 1800 150 XP100 2-49 1MB21214AB213AG3 1800 100 XP100 2-53 1MB21214DB213AG3 1800 150 XP100 2-53 6-14 2014 Low Voltage AC Motors Selection and Pricing Guide Introduction Part number index SIMOTICS NEMA motors Page Part Number HP RPM Type Page XP100 2-50 1MB22212BB216GA3 1800 20 XP100 ID1 2-58 1MB21214DB313AG3 1800 200 XP100 2-53 1MB22212BC114AA3 1200 7.5 XP100 ID1 2-56 1MB21214DB512AG3 1800 250 XP100 2-50 1MB22212BC214AA3 1200 10 XP100 ID1 2-56 1MB21214DB513AG3 1800 250 XP100 2-53 1MB22212CB113AA3 1800 25 XP100 ID1 2-59 1MB21214DB612AG3 1800 300 XP100 2-50 1MB22212CB116AA3 1800 25 XP100 ID1 2-56 1MB21214DB613AG3 1800 300 XP100 2-53 1MB22212CB116GA3 1800 25 XP100 ID1 2-58 1MB21214DC612AG3 1200 250 XP100 2-50 1MB22212CB213AA3 1800 30 XP100 ID1 2-59 1MB21214DC613AG3 1200 250 XP100 2-53 1MB22212CB216AA3 1800 30 XP100 ID1 2-57 1MB21214EB112AG3 1800 125 XP100 2-49 1MB22212CB216GA3 1800 30 XP100 ID1 2-58 1MB21214EB212AG3 1800 150 XP100 2-49 1MB22212CC116AA3 1200 15 XP100 ID1 2-56 1MB21214EB312AG3 1800 200 XP100 2-50 1MB22212CC216AA3 1200 20 XP100 ID1 2-56 1MB21214EB512AG3 1800 250 XP100 2-50 1MB22212DA116AA3 3600 25 XP100 ID1 2-56 1MB21214EB612AG3 1800 300 XP100 2-50 1MB22212DA216AA3 3600 30 XP100 ID1 2-57 1MB21214EC512AG3 1200 200 XP100 2-50 1MB22213AB113AA3 1800 40 XP100 ID1 2-59 1MB22211AA214AA3 3600 1.5 XP100 ID1 2-56 1MB22213AB116AA3 1800 40 XP100 ID1 2-57 1MB22211AA314AA3 3600 2 XP100 ID1 2-56 1MB22213AB213AA3 1800 50 XP100 ID1 2-59 1MB22211AB214AA3 1800 1 XP100 ID1 2-56 1MB22213AB216AA3 1800 50 XP100 ID1 2-57 1MB22211AB216GA3 1800 1 XP100 ID1 2-58 1MB22213AC116AA3 1200 25 XP100 ID1 2-56 1MB22211AB314AA3 1800 1.5 XP100 ID1 2-56 1MB22213AC216AA3 1200 30 XP100 ID1 2-57 1MB22211AB316GA3 1800 1.5 XP100 ID1 2-58 1MB22213BA116AA3 3600 40 XP100 ID1 2-57 3600 50 XP100 ID1 2-57 2-59 XP100 ID1 2-56 1MB22213CB113AA3 1800 60 XP100 ID1 2-59 1MB22211AB416GA3 1800 2 XP100 ID1 2-58 1MB22213CB116AA3 1800 60 XP100 ID1 2-57 1MB22211AC314AA3 1200 1 XP100 ID1 2-56 1MB22213CB213AA3 1800 75 XP100 ID1 2-59 1MB22211CA114AA3 3600 3 XP100 ID1 2-56 1MB22213CB216AA3 1800 75 XP100 ID1 2-57 1MB22211CA314AA3 3600 5 XP100 ID1 2-56 1MB22213CC116AA3 1200 40 XP100 ID1 2-57 1MB22211CB113AA3 1800 3 XP100 ID1 2-59 1MB22213CC216AA3 1200 50 XP100 ID1 2-57 1MB22211CB114AA3 1800 3 XP100 ID1 2-56 1MB22213DA116AA3 3600 60 XP100 ID1 2-57 1MB22211CB116GA3 1800 3 XP100 ID1 2-58 1MB22213DA216AA3 3600 75 XP100 ID1 2-57 1MB22211CB313AA3 1800 5 XP100 ID1 2-59 1MB22214AB213AA3 1800 100 XP100 ID1 2-59 1MB22211CB314AA3 1800 5 XP100 ID1 2-56 1MB22214AB216AA3 1800 100 XP100 ID1 2-57 1MB22211CB316GA3 1800 5 XP100 ID1 2-58 1MB22214AC116AA3 1200 60 XP100 ID1 2-57 1MB22211CC114AA3 1200 1.5 XP100 ID1 2-56 1MB22214AC216AA3 1200 75 XP100 ID1 2-57 1MB22211CC314AA3 1200 2 XP100 ID1 2-56 1MB22214BA216AA3 3600 100 XP100 ID1 2-57 1MB22212AA114AA3 3600 7.5 XP100 ID1 2-56 1MB22214CB112AA3 1800 125 XP100 ID1 2-57 1MB22212AA214AA3 3600 10 XP100 ID1 2-56 1MB22214CB113AA3 1800 125 XP100 ID1 2-59 1MB22212AB113AA3 1800 7.5 XP100 ID1 2-59 1MB22214CB212AA3 1800 150 XP100 ID1 2-57 1MB22212AB114AA3 1800 7.5 XP100 ID1 2-56 1MB22214CB213AA3 1800 150 XP100 ID1 2-59 1MB22212AB116GA3 1800 7.5 XP100 ID1 2-58 1MB22214CB312AA3 1800 200 XP100 ID1 2-57 1MB22212AB213AA3 1800 10 XP100 ID1 2-59 1MB22214CB512AA3 1800 250 XP100 ID1 2-57 1MB22212AB214AA3 1800 10 XP100 ID1 2-56 1MB22214CB612AA3 1800 300 XP100 ID1 2-57 1MB22212AB216GA3 1800 10 XP100 ID1 2-58 1MB22214CC116AA3 1200 100 XP100 ID1 2-57 1MB22212AC114AA3 1200 3 XP100 ID1 2-56 1MB22214CC212AA3 1200 125 XP100 ID1 2-57 1MB22212AC214AA3 1200 5 XP100 ID1 2-56 1MB22214CC312AA3 1200 150 XP100 ID1 2-57 1MB22212BA114AA3 3600 15 XP100 ID1 2-56 1MB22214CC512AA3 1200 200 XP100 ID1 2-57 1MB22212BA214AA3 3600 20 XP100 ID1 2-56 1MB22214DA112AA3 3600 125 XP100 ID1 2-57 1MB22212BB113AA3 1800 15 XP100 ID1 2-59 1MB22214DA212AA3 3600 150 XP100 ID1 2-57 1MB22212BB114AA3 1800 15 XP100 ID1 2-56 1MB22214DA312AA3 3600 200 XP100 ID1 2-57 3600 250 XP100 ID1 2-57 1MB22212BB116GA3 1800 15 XP100 ID1 2-58 1MB22214DA512AA3 1MB22212BB213AA3 1800 20 XP100 ID1 2-59 1MB22214DA612AA3 3600 300 XP100 ID1 2-57 1MB22212BB214AA3 1800 20 XP100 ID1 2-56 1MB22214EB112AA3 1800 125 XP100 ID1 2-57 6-15 Part Number Index 2014 Low Voltage AC Motors Selection and Pricing Guide General Dimensions XP100 ID1 2 Typical Performance Data 2 1800 Options Selection and Pricing 1800 1MB22211AB414AA3 Special Features Detail 1MB22211AB413AA3 1MB22213BA216AA3 Definite Purpose Motors Type 200 Hazardous Duty Motors RPM Severe Duty Motors HP 1800 General Purpose Motors Part Number 1MB21214DB312AG3 Part number index SIMOTICS NEMA motors Part Number HP RPM Type Page Part Number HP RPM Type Page 1MB22214EB113AA3 1800 125 XP100 ID1 2-59 1PC28112AD316TA3 900 2 RGZVESD 2-68 1MB22214EB212AA3 1800 150 XP100 ID1 2-57 1PC28112AD413TA3 900 3 RGZVESD 2-70 1MB22214EB213AA3 1800 150 XP100 ID1 2-59 1PC28112AD416TA3 900 3 RGZVESD 2-68 1MB22214EB312AA3 1800 200 XP100 ID1 2-57 1PC28112BA313TA3 3600 15 RGZVESD 2-70 1MB22214EB512AA3 1800 250 XP100 ID1 2-57 1PC28112BA316TA3 3600 15 RGZVESD 2-68 1MB22214EB612AA3 1800 300 XP100 ID1 2-57 1PC28112BA413TA3 3600 20 RGZVESD 2-70 1MB22214EC116AA3 1200 100 XP100 ID1 2-57 1PC28112BA416TA3 3600 20 RGZVESD 2-68 1MB22214EC212AA3 1200 125 XP100 ID1 2-57 1PC28112BB313TA3 1800 15 RGZVESD 2-70 1MB22214EC312AA3 1200 150 XP100 ID1 2-57 1PC28112BB316TA3 1800 15 RGZVESD 2-68 1MB22214EC512AA3 1200 200 XP100 ID1 2-57 1PC28112BB413TA3 1800 20 RGZVESD 2-70 1PC28111BA213TA3 3600 1.5 RGZVESD 2-70 1PC28112BB416TA3 1800 20 RGZVESD 2-68 1PC28111BA216TA3 3600 1.5 RGZVESD 2-68 1PC28112BC313TA3 1200 7.5 RGZVESD 2-70 1PC28111BA313TA3 3600 2 RGZVESD 2-70 1PC28112BC316TA3 1200 7.5 RGZVESD 2-68 1PC28111BA316TA3 3600 2 RGZVESD 2-68 1PC28112BC413TA3 1200 10 RGZVESD 2-70 1PC28111BB213TA3 1800 1 RGZVESD 2-70 1PC28112BC416TA3 1200 10 RGZVESD 2-68 1PC28111BB216TA3 1800 1 RGZVESD 2-68 1PC28112BD313TA3 900 5 RGZVESD 2-70 1PC28111BB313TA3 1800 1.5 RGZVESD 2-70 1PC28112BD316TA3 900 5 RGZVESD 2-68 1PC28111BB316TA3 1800 1.5 RGZVESD 2-68 1PC28112BD413TA3 900 7.5 RGZVESD 2-70 1PC28111BB413TA3 1800 2 RGZVESD 2-70 1PC28112BD416TA3 900 7.5 RGZVESD 2-68 1PC28111BB416TA3 1800 2 RGZVESD 2-68 1PC28112CA312TA3 3600 25 RGZVESD 2-68 1PC28111BC313TA3 1200 1 RGZVESD 2-70 1PC28112CA313TA3 3600 25 RGZVESD 2-70 1PC28111BC316TA3 1200 1 RGZVESD 2-68 1PC28112CA412TA3 3600 30 RGZVESD 2-69 1PC28111DA113TA3 3600 3 RGZVESD 2-70 1PC28112CA413TA3 3600 30 RGZVESD 2-71 1PC28111DA116TA3 3600 3 RGZVESD 2-68 1PC28112CB312TA3 1800 25 RGZVESD 2-68 1PC28111DA213TA3 3600 5 RGZVESD 2-70 1PC28112CB313TA3 1800 25 RGZVESD 2-70 1PC28111DA216TA3 3600 5 RGZVESD 2-68 1PC28112CB412TA3 1800 30 RGZVESD 2-69 1PC28111DB113TA3 1800 3 RGZVESD 2-70 1PC28112CB413TA3 1800 30 RGZVESD 2-71 1PC28111DB116TA3 1800 3 RGZVESD 2-68 1PC28112CC313TA3 1200 15 RGZVESD 2-70 1PC28111DB213TA3 1800 5 RGZVESD 2-70 1PC28112CC316TA3 1200 15 RGZVESD 2-68 1PC28111DB216TA3 1800 5 RGZVESD 2-68 1PC28112CC413TA3 1200 20 RGZVESD 2-70 1PC28111DC113TA3 1200 1.5 RGZVESD 2-70 1PC28112CC416TA3 1200 20 RGZVESD 2-68 1PC28111DC116TA3 1200 1.5 RGZVESD 2-68 1PC28112CD313TA3 900 10 RGZVESD 2-70 1PC28111DC213TA3 1200 2 RGZVESD 2-70 1PC28112CD316TA3 900 10 RGZVESD 2-68 1PC28111DC216TA3 1200 2 RGZVESD 2-68 1PC28112CD413TA3 900 15 RGZVESD 2-70 1PC28111DD113TA3 900 1 RGZVESD 2-70 1PC28112CD416TA3 900 15 RGZVESD 2-68 1PC28111DD116TA3 900 1 RGZVESD 2-68 1PC28113AA312TA3 3600 40 RGZVESD 2-69 1PC28111DD213TA3 900 1.5 RGZVESD 2-70 1PC28113AA313TA3 3600 40 RGZVESD 2-71 1PC28111DD216TA3 900 1.5 RGZVESD 2-68 1PC28113AA412TA3 3600 50 RGZVESD 2-69 1PC28112AA313TA3 3600 7.5 RGZVESD 2-70 1PC28113AA413TA3 3600 50 RGZVESD 2-71 1PC28112AA316TA3 3600 7.5 RGZVESD 2-68 1PC28113AB312TA3 1800 40 RGZVESD 2-69 1PC28112AA413TA3 3600 10 RGZVESD 2-70 1PC28113AB313TA3 1800 40 RGZVESD 2-71 1PC28112AA416TA3 3600 10 RGZVESD 2-68 1PC28113AB412TA3 1800 50 RGZVESD 2-69 1PC28112AB313TA3 1800 7.5 RGZVESD 2-70 1PC28113AB413TA3 1800 50 RGZVESD 2-71 1PC28112AB316TA3 1800 7.5 RGZVESD 2-68 1PC28113AC312TA3 1200 25 RGZVESD 2-68 1PC28112AB413TA3 1800 10 RGZVESD 2-70 1PC28113AC313TA3 1200 25 RGZVESD 2-70 1PC28112AB416TA3 1800 10 RGZVESD 2-68 1PC28113AC412TA3 1200 30 RGZVESD 2-69 1PC28112AC313TA3 1200 3 RGZVESD 2-70 1PC28113AC413TA3 1200 30 RGZVESD 2-71 1PC28112AC316TA3 1200 3 RGZVESD 2-68 1PC28113AD313TA3 900 20 RGZVESD 2-70 1PC28112AC413TA3 1200 5 RGZVESD 2-70 1PC28113AD316TA3 900 20 RGZVESD 2-68 1PC28112AC416TA3 1200 5 RGZVESD 2-68 1PC28113AD412TA3 900 25 RGZVESD 2-68 1PC28112AD313TA3 900 2 RGZVESD 2-70 1PC28113AD413TA3 900 25 RGZVESD 2-70 6-16 2014 Low Voltage AC Motors Selection and Pricing Guide Introduction Part number index SIMOTICS NEMA motors Type Page 125 RGZVESD 2-71 1PC28113AD413TA3 900 25 RGZVESD 2-70 1PC28114HD412TA3 900 150 RGZVESD 2-69 1PC28113CA312TA3 3600 60 RGZVESD 2-69 1PC28114HD413TA3 900 150 RGZVESD 2-71 1PC28113CA313TA3 3600 60 RGZVESD 2-71 1PC28114HD612TA3 900 200 RGZVESD 2-69 1PC28113CA412TA3 3600 75 RGZVESD 2-69 1PC28114HD613TA3 900 200 RGZVESD 2-71 1PC28113CA413TA3 3600 75 RGZVESD 2-71 1PC28311DA413TA3 3600 3 RGZVILESD 2-75 1PC28113CB312TA3 1800 60 RGZVESD 2-69 1PC28311DA416TA3 3600 3 RGZVILESD 2-74 1PC28113CB313TA3 1800 60 RGZVESD 2-71 1PC28311DA513TA3 3600 5 RGZVILESD 2-75 1PC28113CB412TA3 1800 75 RGZVESD 2-69 1PC28311DA516TA3 3600 5 RGZVILESD 2-74 1PC28113CB413TA3 1800 75 RGZVESD 2-71 1PC28311DB413TA3 1800 3 RGZVILESD 2-75 1PC28113CC312TA3 1200 40 RGZVESD 2-69 1PC28311DB416TA3 1800 3 RGZVILESD 2-74 1PC28113CC313TA3 1200 40 RGZVESD 2-71 1PC28311DB513TA3 1800 5 RGZVILESD 2-75 1PC28113CC412TA3 1200 50 RGZVESD 2-69 1PC28311DB516TA3 1800 5 RGZVILESD 2-74 1PC28113CC413TA3 1200 50 RGZVESD 2-71 1PC28312AA513TA3 3600 7.5 RGZVILESD 2-75 1PC28113CD312TA3 900 30 RGZVESD 2-69 1PC28312AA516TA3 3600 7.5 RGZVILESD 2-74 1PC28113CD313TA3 900 30 RGZVESD 2-71 1PC28312AA613TA3 3600 10 RGZVILESD 2-75 1PC28113CD412TA3 900 40 RGZVESD 2-69 1PC28312AA616TA3 3600 10 RGZVILESD 2-74 1PC28113CD413TA3 900 40 RGZVESD 2-71 1PC28312AB513TA3 1800 7.5 RGZVILESD 2-75 1PC28114AA412TA3 3600 100 RGZVESD 2-69 1PC28312AB516TA3 1800 7.5 RGZVILESD 2-74 1PC28114AA413TA3 3600 100 RGZVESD 2-71 1PC28312AB613TA3 1800 10 RGZVILESD 2-75 1PC28114AB412TA3 1800 100 RGZVESD 2-69 1PC28312AB616TA3 1800 10 RGZVILESD 2-74 1PC28114AB413TA3 1800 100 RGZVESD 2-71 1PC28312AC513TA3 1200 3 RGZVILESD 2-75 1PC28114AC312TA3 1200 60 RGZVESD 2-69 1PC28312AC516TA3 1200 3 RGZVILESD 2-74 1PC28114AC313TA3 1200 60 RGZVESD 2-71 1PC28312AC613TA3 1200 5 RGZVILESD 2-75 1PC28114AC412TA3 1200 75 RGZVESD 2-69 1PC28312AC616TA3 1200 5 RGZVILESD 2-74 1PC28114AC413TA3 1200 75 RGZVESD 2-71 1PC28312BA513TA3 3600 15 RGZVILESD 2-75 1PC28114AD312TA3 900 50 RGZVESD 2-69 1PC28312BA516TA3 3600 15 RGZVILESD 2-74 1PC28114AD313TA3 900 50 RGZVESD 2-71 1PC28312BA613TA3 3600 20 RGZVILESD 2-75 1PC28114AD412TA3 900 60 RGZVESD 2-69 1PC28312BA616TA3 3600 20 RGZVILESD 2-74 1PC28114AD413TA3 900 60 RGZVESD 2-71 1PC28312BB513TA3 1800 15 RGZVILESD 2-75 1PC28114HB112TA3 1800 125 RGZVESD 2-69 1PC28312BB516TA3 1800 15 RGZVILESD 2-74 1PC28114HB113TA3 1800 125 RGZVESD 2-71 1PC28312BB613TA3 1800 20 RGZVILESD 2-75 1PC28114HB212TA3 1800 150 RGZVESD 2-69 1PC28312BB616TA3 1800 20 RGZVILESD 2-74 1PC28114HB213TA3 1800 150 RGZVESD 2-71 1PC28312BC513TA3 1200 7.5 RGZVILESD 2-75 1PC28114HB312TA3 1800 200 RGZVESD 2-69 1PC28312BC516TA3 1200 7.5 RGZVILESD 2-74 1PC28114HB313TA3 1800 200 RGZVESD 2-71 1PC28312BC613TA3 1200 10 RGZVILESD 2-75 1PC28114HB512TA3 1800 250 RGZVESD 2-69 1PC28312BC616TA3 1200 10 RGZVILESD 2-74 1PC28114HB513TA3 1800 250 RGZVESD 2-71 1PC28312EA112TA3 3600 25 RGZVILESD 2-74 1PC28114HC112TA3 1200 100 RGZVESD 2-69 1PC28312EA113TA3 3600 25 RGZVILESD 2-75 1PC28114HC113TA3 1200 100 RGZVESD 2-71 1PC28312EA412TA3 3600 30 RGZVILESD 2-74 1PC28114HC212TA3 1200 125 RGZVESD 2-69 1PC28312EA413TA3 3600 30 RGZVILESD 2-75 1PC28114HC213TA3 1200 125 RGZVESD 2-71 1PC28312EB112TA3 1800 25 RGZVILESD 2-74 1PC28114HC312TA3 1200 150 RGZVESD 2-69 1PC28312EB113TA3 1800 25 RGZVILESD 2-75 1PC28114HC313TA3 1200 150 RGZVESD 2-71 1PC28312EB412TA3 1800 30 RGZVILESD 2-74 1PC28114HC512TA3 1200 200 RGZVESD 2-69 1PC28312EB413TA3 1800 30 RGZVILESD 2-75 1PC28114HC513TA3 1200 200 RGZVESD 2-71 1PC28312EC113TA3 1200 15 RGZVILESD 2-75 1PC28114HC612TA3 1200 250 RGZVESD 2-69 1PC28312EC116TA3 1200 15 RGZVILESD 2-74 1PC28114HC613TA3 1200 250 RGZVESD 2-71 1PC28312EC413TA3 1200 20 RGZVILESD 2-75 1PC28114HD112TA3 900 75 RGZVESD 2-69 1PC28312EC416TA3 1200 20 RGZVILESD 2-74 1PC28114HD113TA3 900 75 RGZVESD 2-71 1PC28313AA512TA3 3600 40 RGZVILESD 2-74 1PC28114HD212TA3 900 100 RGZVESD 2-69 1PC28313AA513TA3 3600 40 RGZVILESD 2-75 6-17 Part Number Index 2014 Low Voltage AC Motors Selection and Pricing Guide General Dimensions RPM 900 Typical Performance Data HP 1PC28114HD313TA3 Options Selection and Pricing Part Number 2-71 Special Features Detail Page RGZVESD Definite Purpose Motors Type 60 Hazardous Duty Motors RPM Severe Duty Motors HP 3600 General Purpose Motors Part Number 1PC28113CA313TA3 Part number index SIMOTICS NEMA motors Part Number HP RPM Type Page Part Number HP RPM Type Page 1PC28313AA612TA3 3600 50 RGZVILESD 2-74 1PC29111CB512AG3 1800 2 RGKESDI 1000:1 2-64 1PC28313AA613TA3 3600 50 RGZVILESD 2-75 1PC29111CB612AG3 1800 1.5 RGKESDI 1000:1 2-64 1PC28313AB512TA3 1800 40 RGZVILESD 2-74 1PC29111CB712AG3 1800 3 RGKESDI 1000:1 2-64 1PC28313AB513TA3 1800 40 RGZVILESD 2-75 1PC29111CC612AG3 1200 1 RGKESDI 1000:1 2-64 1PC28313AB612TA3 1800 50 RGZVILESD 2-74 1PC29111CC712AG3 1200 1.5 RGKESDI 1000:1 2-64 1PC28313AB613TA3 1800 50 RGZVILESD 2-75 1PC29112AC012AG3 1200 3 RGKESDI 1000:1 2-64 1PC28313AC512TA3 1200 25 RGZVILESD 2-74 1PC29112BB712AG3 1800 7.5 RGKESDI 1000:1 2-64 1PC28313AC513TA3 1200 25 RGZVILESD 2-75 1PC29112BB812AG3 1800 10 RGKESDI 1000:1 2-64 1PC28313AC612TA3 1200 30 RGZVILESD 2-74 1PC29112BC012AG3 1200 7.5 RGKESDI 1000:1 2-64 1PC28313AC613TA3 1200 30 RGZVILESD 2-75 1PC29112KA112AG3 3600 3 RGKESDI 1000:1 2-64 1PC28313CA512TA3 3600 60 RGZVILESD 2-74 1PC29112KA212AG3 3600 5 RGKESDI 1000:1 2-64 1PC28313CA513TA3 3600 60 RGZVILESD 2-75 1PC29112KA312AG3 3600 7.5 RGKESDI 1000:1 2-64 1PC28313CA612TA3 3600 75 RGZVILESD 2-74 1PC29112KA412AG3 3600 10 RGKESDI 1000:1 2-64 1PC28313CA613TA3 3600 75 RGZVILESD 2-75 1PC29112KB512AG3 1800 5 RGKESDI 1000:1 2-64 1PC28313CB512TA3 1800 60 RGZVILESD 2-74 1PC29112KC512AG3 1200 2 RGKESDI 1000:1 2-64 1PC28313CB513TA3 1800 60 RGZVILESD 2-75 1PC29112KC612AG3 1200 5 RGKESDI 1000:1 2-64 1PC28313CB612TA3 1800 75 RGZVILESD 2-74 1PC29212BA112AG3 3600 15 RGZESDI 1000:1 2-64 1PC28313CB613TA3 1800 75 RGZVILESD 2-75 1PC29212BA212AG3 3600 20 RGZESDI 1000:1 2-64 1PC28313CC512TA3 1200 40 RGZVILESD 2-74 1PC29212BB112AG3 1800 15 RGZESDI 1000:1 2-64 1PC28313CC513TA3 1200 40 RGZVILESD 2-75 1PC29212BB212AG3 1800 20 RGZESDI 1000:1 2-64 1PC28313CC612TA3 1200 50 RGZVILESD 2-74 1PC29212BC212AG3 1200 10 RGZESDI 1000:1 2-64 1PC28313CC613TA3 1200 50 RGZVILESD 2-75 1PC29212CB112AG3 1800 25 RGZESDI 1000:1 2-64 1PC28314AA612TA3 3600 100 RGZVILESD 2-74 1PC29212CB212AG3 1800 30 RGZESDI 1000:1 2-64 1PC28314AA613TA3 3600 100 RGZVILESD 2-75 1PC29212CC112AG3 1200 15 RGZESDI 1000:1 2-64 1PC28314AB612TA3 1800 100 RGZVILESD 2-74 1PC29212CC212AG3 1200 20 RGZESDI 1000:1 2-64 1PC28314AB613TA3 1800 100 RGZVILESD 2-75 1PC29212DA112AG3 3600 25 RGZESDI 1000:1 2-64 1PC28314AC512TA3 1200 60 RGZVILESD 2-74 1PC29212DA212AG3 3600 30 RGZESDI 1000:1 2-64 1PC28314AC513TA3 1200 60 RGZVILESD 2-75 1PC29213AB112AG3 1800 40 RGZESDI 1000:1 2-64 1PC28314AC612TA3 1200 75 RGZVILESD 2-74 1PC29213AB212AG3 1800 50 RGZESDI 1000:1 2-64 1PC28314AC613TA3 1200 75 RGZVILESD 2-75 1PC29213AC112AG3 1200 25 RGZESDI 1000:1 2-64 1PC28314JB112TA3 1800 125 RGZVILESD 2-74 1PC29213AC212AG3 1200 30 RGZESDI 1000:1 2-64 1PC28314JB113TA3 1800 125 RGZVILESD 2-75 1PC29213BA112AG3 3600 40 RGZESDI 1000:1 2-64 1PC28314JB212TA3 1800 150 RGZVILESD 2-74 1PC29213BA212AG3 3600 50 RGZESDI 1000:1 2-64 1PC28314JB213TA3 1800 150 RGZVILESD 2-75 1PC29213CB112AG3 1800 60 RGZESDI 1000:1 2-64 1PC28314JB312TA3 1800 200 RGZVILESD 2-74 1PC29213CB212AG3 1800 75 RGZESDI 1000:1 2-64 1PC28314JB313TA3 1800 200 RGZVILESD 2-75 1PC29213CC112AG3 1200 40 RGZESDI 1000:1 2-64 1PC28314JB512TA3 1800 250 RGZVILESD 2-74 1PC29213CC212AG3 1200 50 RGZESDI 1000:1 2-64 1PC28314JB513TA3 1800 250 RGZVILESD 2-75 1PC29213DA112AG3 3600 60 RGZESDI 1000:1 2-64 1PC28314JC112TA3 1200 100 RGZVILESD 2-74 1PC29213DA212AG3 3600 75 RGZESDI 1000:1 2-64 1PC28314JC113TA3 1200 100 RGZVILESD 2-75 1PC29214AB212AG3 1800 100 RGZESDI 1000:1 2-64 1PC28314JC212TA3 1200 125 RGZVILESD 2-74 1PC29214AC112AG3 1200 60 RGZESDI 1000:1 2-64 1PC28314JC213TA3 1200 125 RGZVILESD 2-75 1PC29214AC212AG3 1200 75 RGZESDI 1000:1 2-64 1PC28314JC312TA3 1200 150 RGZVILESD 2-74 1PC29214BA212AG3 3600 100 RGZESDI 1000:1 2-64 1PC28314JC313TA3 1200 150 RGZVILESD 2-75 1PC29214DA112AG3 3600 125 RGZESDI 1000:1 2-64 1PC28314JC512TA3 1200 200 RGZVILESD 2-74 1PC29214DA212AG3 3600 150 RGZESDI 1000:1 2-64 1PC28314JC513TA3 1200 200 RGZVILESD 2-75 1PC29214DA312AG3 3600 200 RGZESDI 1000:1 2-64 1PC28314JC612TA3 1200 250 RGZVILESD 2-74 1PC29214DA512AG3 3600 250 RGZESDI 1000:1 2-64 1PC28314JC613TA3 1200 250 RGZVILESD 2-75 1PC29214DA612AG3 3600 300 RGZESDI 1000:1 2-64 1PC29111AB512AG3 1800 1 RGKESDI 1000:1 2-64 1PC29214DB112AG3 1800 125 RGZESDI 1000:1 2-64 1PC29111CA612AG3 3600 1.5 RGKESDI 1000:1 2-64 1PC29214DB212AG3 1800 150 RGZESDI 1000:1 2-64 1PC29111CA812AG3 3600 2 RGKESDI 1000:1 2-64 1PC29214DB312AG3 1800 200 RGZESDI 1000:1 2-64 6-18 2014 Low Voltage AC Motors Selection and Pricing Guide Introduction Part number index SIMOTICS NEMA motors Type 250 RGZESDI 1000:1 Page 2-64 1PC29214DB612AG3 1800 300 RGZESDI 1000:1 2-64 1PC29214DC112AG3 1200 100 RGZESDI 1000:1 2-64 1PC29214DC212AG3 1200 125 RGZESDI 1000:1 2-64 1PC29214DC312AG3 1200 150 RGZESDI 1000:1 2-64 1PC29214DC512AG3 1200 200 RGZESDI 1000:1 2-64 1PC29214DC612AG3 1200 250 RGZESDI 1000:1 2-64 1PC29214GA112AG3 3600 350 RGZESDI 1000:1 2-64 1PC29214GA312AG3 3600 400 RGZESDI 1000:1 2-64 1PC29214GB212AG3 1800 350 RGZESDI 1000:1 2-64 1PC29214GB312AG3 1800 400 RGZESDI 1000:1 2-64 1PC29214GC112AG3 1200 300 RGZESDI 1000:1 2-64 1PC29214GC312AG3 1200 350 RGZESDI 1000:1 2-64 Hazardous Duty Motors RPM Severe Duty Motors HP 1800 General Purpose Motors Part Number 1PC29214DB512AG3 Definite Purpose Motors Special Features Detail Options Selection and Pricing Typical Performance Data General Dimensions 6-19 Part Number Index 2014 Low Voltage AC Motors Selection and Pricing Guide Find out more: usa.siemens.com/motors Navigate to sites for all parts of Drive Technology US Access all catalogs, brochures, technical information, and other resources Drive Technology SIMOTICS Subject to change without prior notice. All rights reserved. Order No.: NMPC-00600-0414 Printed in USA © 2014 Siemens Industry, Inc. The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual use do not always apply as described or whichmay change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. All product designations may be trademarks or product names of Siemens AG or supplier companies whose use by third parties for their own purposes could violate the rights of the owners. SIMOTICS NEMA Motors • Selection and Pricing Guide • 2014 Siemens Drive Technology Website: SIMOTICS NEMA Motors Low Voltage AC Motors Selection and Pricing Guide usa.siemens.com/motors Follow us on: twitter.com/siemensindustry siemens.com/safety/youtube Siemens Industry, Inc. 3333 Old Milton Parkway Alpharetta, GA 30005 1-800-241-4453 [email protected] D81.2 Edition 04/2014 Answers for industry.