ds32010

A Product Line of
Diodes Incorporated
DXT2013P5
ADVANCE INFORMATION
100V PNP MEDIUM POWER TRANSISTOR
PowerDI®5
Features
Mechanical Data
•
•
•
•
•
•
•
•
•
•
43% smaller than SOT223; 60% smaller than TO252
Maximum height just 1.1mm
Rated up to 3.2W
VCEO = -100V
IC = -5A; ICM = -10A
Low Saturation voltage
Lead, Halogen and Antimony Free, RoHS Compliant (Note 1)
“Green” Device (Note 2)
•
•
•
®
Case: PowerDI 5
Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Terminals: Finish – Matte Tin annealed over Copper leadframe.
Solderable per MIL-STD-202, Method 208
Weight: 0.093 grams (approximate)
Applications
•
SLIC DC-DC Converter
C
B
Top View
Device Schematic
Bottom View
E
Pin-out diagram
Ordering Information (Note 3)
Part Number
DXT2013P5-13
Notes:
Case
®
PowerDI 5
Packaging
5000/Tape & Reel
1. No purposefully added lead. Halogen and Antimony Free.
2. Diodes Inc’s “Green” Policy can be found on our website at http://www.diodes.com
3. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.
Marking Information
DXT2013
YYWWK
DXT2013 = Product Type Marking Code
= Manufacturers’ Code Marking
K = Factory Designator
YYWW = Date Code Marking
YY = Last Two Digits of Year (ex: 09 for 2009)
WW = Week code (01 to 53)
PowerDI is a registered trademark of Diodes Incorporated.
1 of 7
DXT2013P5
Document number: DS32010 Rev. 2 - 2
www.diodes.com
March 2010
© Diodes Incorporated
A Product Line of
Diodes Incorporated
DXT2013P5
ADVANCE INFORMATION
Maximum Ratings
@TA = 25°C unless otherwise specified
Characteristic
Collector-Base Voltage
Collector-Emitter Voltage
Emitter-Base Voltage
Continuous Collector Current
Peak Pulse Current
Symbol
VCBO
VCEO
VEBO
IC
ICM
Value
-140
-100
-7
-5
-10
Unit
V
V
V
A
A
Symbol
PD
RθJA
PD
RθJA
PD
RθJA
RθJT
TJ, TSTG
Value
3.2
39
1.7
75
0.74
169
5.6
-55 to +150
Unit
W
°C/W
W
°C/W
W
°C/W
°C/W
°C
Thermal Characteristics
Characteristic
Power Dissipation @ TA = 25°C (Note 4)
Thermal Resistance, Junction to Ambient Air (Note 4) @TA = 25°C
Power Dissipation @ TA = 25°C (Note 5)
Thermal Resistance, Junction to Ambient Air (Note 5) @TA = 25°C
Power Dissipation @ TA = 25°C (Note 6)
Thermal Resistance, Junction to Ambient Air (Note 6) @TA = 25°C
Thermal Resistance, Junction to Collector Terminal
Operating and Storage Temperature Range
Notes:
4. Device mounted on FR-4 PCB, single sided 2 oz. copper, collector pad dimensions 50mm x 50mm.
5. Device mounted on FR-4 PCB, single sided 1 oz. copper, collector pad dimensions 25mm x 25mm.
6. Device mounted on FR-4 PCB, single sided 1 oz. copper, minimum recommended pad layout.
PowerDI is a registered trademark of Diodes Incorporated.
2 of 7
DXT2013P5
Document number: DS32010 Rev. 2 - 2
www.diodes.com
March 2010
© Diodes Incorporated
A Product Line of
Diodes Incorporated
DXT2013P5
Max Power Dissipation (W)
-IC Collector Current (A)
Limited
1
DC
1s
100ms
100m
10ms
1ms
Single Pulse. Tamb=25°C
100µs
See note 3
10m
100m
1
10
100
-VCE Collector-Emitter Voltage (V)
3.0
2.5
See note 3
2.0
See note 4
1.5
See note 5
1.0
0.5
0.0
0
25
See note 3
30
D=0.5
20
D=0.2
Single Pulse
10
D=0.05
0
100µ
D=0.1
1m
10m 100m
1
10
100
1k
Pulse Width (s)
100
125
150
175
Single Pulse. Tamb=25°C
100
See note 3
10
1
100µ
1m
10m 100m
1
10
100
1k
Pulse Width (s)
Transient Thermal Impedance
Pulse Power Dissipation
4
180
T (amb)=25°C
T (amb)=25°C
Power Rating (W)
160
140
1 oz. weight Copper
120
100
80
60
40
75
Derating Curve
Max Power Dissipation (W)
Thermal Resistance (°C/W)
40
50
Temperature (°C)
Safe Operating Area
Thermal Resistance (°C/W)
ADVANCE INFORMATION
3.5
10 VCE(sat)
2 oz. weight Copper
20
10
100
1000
10000
3
2 oz. weight Copper
2
1
1 oz. weight Copper
0
10
Copper Area (sq mm)
Thermal Resistance vs. Cu Area
PowerDI is a registered trademark of Diodes Incorporated.
3 of 7
DXT2013P5
Document number: DS32010 Rev. 2 - 2
100
1000
10000
Copper Area (sq mm)
www.diodes.com
Power Rating vs. Cu Area
March 2010
© Diodes Incorporated
A Product Line of
Diodes Incorporated
DXT2013P5
ADVANCE INFORMATION
Electrical Characteristics
@TA = 25°C unless otherwise specified
Characteristic
Collector-Base Breakdown Voltage
Collector-Emitter Breakdown Voltage (Note 7)
Emitter-Base Breakdown Voltage
Collector Cutoff Current
Collector Cutoff Current
Emitter Cutoff Current
Symbol
V(BR)CBO
V(BR)CEO
V(BR)EBO
Min
-140
-100
-7.0
ICBO
⎯
ICER
R≤1kΩ
IEBO
⎯
⎯
Typ
-160
-115
-8.1
<1
⎯
<1
⎯
<1
Max
⎯
⎯
⎯
-20
-0.5
-30
-90
-150
-340
mV
-20
-0.5
-10
Unit
V
V
V
nA
μA
nA
μA
nA
Collector-Emitter Saturation Voltage (Note 7)
VCE(sat)
⎯
-20
-70
-120
-240
Base-Emitter Saturation Voltage (Note 7)
Base-Emitter Turn-On Voltage (Note 7)
VBE(sat)
VBE(on)
⎯
⎯
-985
-920
-1100
-1050
mV
mV
hFE
100
100
25
15
⎯
250
200
50
30
5
⎯
300
⎯
⎯
⎯
⎯
Transition Frequency
fT
⎯
125
⎯
MHz
Output Capacitance
Cobo
ton
toff
⎯
⎯
⎯
42
42
540
⎯
⎯
⎯
pF
ns
ns
DC Current Gain (Note 7)
Switching Times
Notes:
Test Condition
IC = -100μA
IC = -10mA
IE = -100μA
VCB = -100V
VCB = -100V, Tamb = 100 °C
VCB = -100V
VCB = -100V, Tamb = 100 °C
VEB = -6V
IC = -0.1A, IB = -10mA
IC = -1A, IB = -100mA
IC = -2A, IB = -200mA
IC = -4A, IB = -400mA
IC = -4A, IB = -400mA
VCE = -4V, IC = -2A
IC = -10mA, VCE = -1V
IC = -1A, VCE = -1V
IC = -3A, VCE = -1V
IC = -4A, VCE = -1V
IC = -10A, VCE = -1V
IC = -100mA, VCE = -10V,
f = 50MHz
VCB = -10V, f = 1MHz
IC = -1A, VCC = -10V,
IB1 = IB2 = -100mA
7. Pulse Test: Pulse width ≤300μs. Duty cycle ≤2.0%.
PowerDI is a registered trademark of Diodes Incorporated.
4 of 7
DXT2013P5
Document number: DS32010 Rev. 2 - 2
www.diodes.com
March 2010
© Diodes Incorporated
A Product Line of
Diodes Incorporated
DXT2013P5
1
0.6
Tamb=25°C
IC/IB=20
0.4
- VCE(SAT) (V)
0.5
- VCE(SAT) (V)
IC/IB=50
100m
IC/IB=10
0.3
100°C
0.2
25°C
0.1
IC/IB=10
10m
1m
10m
100m
1
- IC Collector Current (A)
-55°C
0.0
1m
10
10m
1.2
1.0
150
25°C
0.8
0.6
100
0.4
-55°C
50
0.2
0.0
1m
10m
100m
0
10
1
10
1
10
IC/IB =10
1.0
- VBE(SAT) (V)
200
Typical Gain (hFE)
1.2
Normalised Gain
VCE=2V
100°C
1
VCE(SAT) v IC
250
1.4
100m
- IC Collector Current (A)
VCE(SAT) v IC
0.8
-55°C
25°C
0.6
100°C
0.4
1m
- IC Collector Current (A)
h FE v IC
10m
100m
- IC Collector Current (A)
VBE(SAT) v IC
1.4
VCE=2V
1.2
- VBE(ON) (V)
ADVANCE INFORMATION
Typical Characteristic
1.0
-55°C
25°C
0.8
0.6
0.4
1m
100°C
10m
100m
1
- IC Collector Current (A)
10
VBE(ON) v IC
PowerDI is a registered trademark of Diodes Incorporated.
5 of 7
DXT2013P5
Document number: DS32010 Rev. 2 - 2
www.diodes.com
March 2010
© Diodes Incorporated
A Product Line of
Diodes Incorporated
DXT2013P5
ADVANCE INFORMATION
Package Outline Dimensions
A
®
PowerDI 5
Dim
Min
Max
A
1.05
1.15
A2
0.33
0.43
b1
0.80
0.99
b2
1.70
1.88
D
3.90
4.05
D2
3.054 Typ
E
6.40
6.60
e
1.84 Typ
E1
5.30
5.45
E2
3.549 Typ
L
0.75
0.95
L1
0.50
0.65
W
1.10
1.41
All Dimensions in mm
D
D2
A2
b2
L
E
E2
E1
W
L1
e
b1
b1
A2
Suggested Pad Layout
Z
C
E1
X2
X1
Y2
Value (in mm)
6.6
1.4
3.6
0.8
4.7
3.87
0.9
Y1
PowerDI is a registered trademark of Diodes Incorporated.
6 of 7
DXT2013P5
Document number: DS32010 Rev. 2 - 2
Dimensions
Z
X1
X2
Y1
Y2
C
E1
www.diodes.com
March 2010
© Diodes Incorporated
A Product Line of
Diodes Incorporated
DXT2013P5
ADVANCE INFORMATION
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2010, Diodes Incorporated
www.diodes.com
PowerDI is a registered trademark of Diodes Incorporated.
7 of 7
DXT2013P5
Document number: DS32010 Rev. 2 - 2
www.diodes.com
March 2010
© Diodes Incorporated
Similar pages