NUP2105L D

NUP2105L, SZNUP2105L
Dual Line CAN
Bus Protector
The SZ/NUP2105L has been designed to protect the CAN
transceiver in high−speed and fault tolerant networks from ESD and
other harmful transient voltage events. This device provides
bidirectional protection for each data line with a single compact
SOT−23 package, giving the system designer a low cost option for
improving system reliability and meeting stringent EMI requirements.
Features
•
•
•
•
•
•
•
•
•
350 W Peak Power Dissipation per Line (8/20 msec Waveform)
Low Reverse Leakage Current (< 100 nA)
Low Capacitance High−Speed CAN Data Rates
IEC Compatibility: − IEC 61000−4−2 (ESD): Level 4
− IEC 61000−4−4 (EFT): 40 A – 5/50 ns
− IEC 61000−4−5 (Lighting) 8.0 A (8/20 ms)
ISO 7637−1, Nonrepetitive EMI Surge Pulse 2, 9.5 A
(1/50 ms)
ISO 7637−3, Repetitive Electrical Fast Transient (EFT)
EMI Surge Pulses, 50 A (5/50 ns)
Flammability Rating UL 94 V−0
SZ Prefix for Automotive and Other Applications Requiring Unique
Site and Control Change Requirements; AEC−Q101 Qualified and
PPAP Capable
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
www.onsemi.com
SOT−23
DUAL BIDIRECTIONAL
VOLTAGE SUPPRESSOR
350 W PEAK POWER
SOT−23
CASE 318
STYLE 27
PIN 1
PIN 3
PIN 2
CAN_H
CAN
Transceiver
CAN Bus
CAN_L
Applications
NUP2105L
• Industrial Control Networks
Smart Distribution Systems (SDS®)
♦ DeviceNet™
Automotive Networks
♦ Low and High−Speed CAN
♦ Fault Tolerant CAN
♦
•
MARKING DIAGRAM
27EMG
G
1
27E
M
G
= Device Code
= Date Code
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2015
September, 2015 − Rev. 6
1
Publication Order Number:
NUP2105L/D
NUP2105L, SZNUP2105L
MAXIMUM RATINGS (TJ = 25°C, unless otherwise specified)
Symbol
PPK
Rating
Value
Peak Power Dissipation
8/20 ms Double Exponential Waveform (Note 1)
Unit
W
350
TJ
Operating Junction Temperature Range
−55 to 150
°C
TJ
Storage Temperature Range
−55 to 150
°C
TL
Lead Solder Temperature (10 s)
260
°C
Human Body model (HBM)
Machine Model (MM)
IEC 61000−4−2 Specification (Contact)
16
400
30
kV
V
kV
ESD
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Non−repetitive current pulse per Figure 1.
ELECTRICAL CHARACTERISTICS (TJ = 25°C, unless otherwise specified)
Symbol
VRWM
VBR
Parameter
Test Conditions
Reverse Working Voltage
(Note 2)
Min
Typ
Max
Unit
24
−
−
V
Breakdown Voltage
IT = 1 mA (Note 3)
26.2
−
32
V
IR
Reverse Leakage Current
VRWM = 24 V
−
1.5
100
nA
VC
Clamping Voltage
IPP = 5 A (8/20 ms Waveform)
(Note 4)
−
−
40
V
VC
Clamping Voltage
IPP = 8 A (8/20 ms Waveform)
(Note 4)
−
−
44
V
IPP
Maximum Peak Pulse Current
8/20 ms Waveform (Note 4)
−
−
8.0
A
CJ
Capacitance
VR = 0 V, f = 1 MHz (Line to GND)
−
−
30
pF
2. TVS devices are normally selected according to the working peak reverse voltage (VRWM), which should be equal or greater than the DC
or continuous peak operating voltage level.
3. VBR is measured at pulse test current IT.
4. Pulse waveform per Figure 1.
ORDERING INFORMATION
Package
Shipping†
NUP2105LT1G
SOT−23
(Pb−Free)
3,000 / Tape & Reel
SZNUP2105LT1G
SOT−23
(Pb−Free)
3,000 / Tape & Reel
NUP2105LT3G
SOT−23
(Pb−Free)
10,000 / Tape & Reel
SZNUP2105LT3G
SOT−23
(Pb−Free)
10,000 / Tape & Reel
Device
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
www.onsemi.com
2
NUP2105L, SZNUP2105L
TYPICAL PERFORMANCE CURVES
(TJ = 25°C unless otherwise noted)
12.0
IPP, PEAK PULSE CURRENT (A)
% OF PEAK PULSE CURRENT
110
WAVEFORM
PARAMETERS
tr = 8 ms
td = 20 ms
100
90
80
c−t
70
60
td = IPP/2
50
40
30
20
PULSE WAVEFORM
8 x 20 ms per Figure 1
10.0
8.0
6.0
4.0
2.0
10
0
0
10
5
20
15
0.0
30
25
25
30
40
45
Figure 1. Pulse Waveform, IEC 61000−4−5 8/20 ms
Figure 2. Clamping Voltage vs Peak Pulse Current
50
35
f = 1.0 MHz, Line to Ground
45
40
30
125°C
35
IT, (mA)
25°C
25
20 −40°C
30
25°C
25
65°C
20
15
10
15
−55°C
5
10
TA = +150°C
0
0
4
2
6
8
10
20
22
VR, REVERSE VOLTAGE (V)
24
26
28
30
32
34
VBR, VOLTAGE (V)
Figure 4. VBR versus IT Characteristics
Figure 3. Typical Junction Capacitance vs
Reverse Voltage
120
25
125°C
20
TA = 150°C
100
65°C
PERCENT DERATING (%)
VR, REVERSE BIAS VOLTAGE (V)
50
VC, CLAMPING VOLTAGE (V)
t, TIME (ms)
C, CAPACITANCE (pF)
35
25°C, −55°C
15
10
5
0
0
2
4
6
8
10
12
IL, LEAKAGE CURRENT (nA)
14
80
60
40
20
0
−60
16
Figure 5. IR versus Temperature Characteristics
−30
0
30
60
90
TEMPERATURE (°C)
120
150 180
Figure 6. Temperature Power Dissipation Derating
www.onsemi.com
3
NUP2105L, SZNUP2105L
APPLICATIONS
Background
ESD. The NUP2105L has been tested to EMI and ESD
levels that exceed the specifications of popular high speed
CAN networks.
The Controller Area Network (CAN) is a serial
communication protocol designed for providing reliable
high speed data transmission in harsh environments. TVS
diodes provide a low cost solution to conducted and radiated
Electromagnetic Interference (EMI) and Electrostatic
Discharge (ESD) noise problems. The noise immunity level
and reliability of CAN transceivers can be easily increased
by adding external TVS diodes to prevent transient voltage
failures.
The NUP2105L provides a transient voltage suppression
solution for CAN data communication lines. The
NUP2105L is a dual bidirectional TVS device in a compact
SOT−23 package. This device is based on Zener technology
that optimizes the active area of a PN junction to provide
robust protection against transient EMI surge voltage and
CAN Physical Layer Requirements
Table 1 provides a summary of the system requirements
for a CAN transceiver. The ISO 11898−2 physical layer
specification forms the baseline for most CAN systems. The
transceiver requirements for the Honeywell® Smart
Distribution
Systems
(SDS®)
and
Rockwell
(Allen−Bradley) DeviceNet™ high speed CAN networks
are similar to ISO 11898−2. The SDS and DeviceNet
transceiver requirements are similar to ISO 11898−2;
however, they include minor modifications required in an
industrial environment.
Table 1. Transceiver Requirements for High−Speed CAN Networks
Parameter
ISO 11898−2
SDS Physical Layer
Specification 2.0
DeviceNet
Min / Max Bus Voltage
(12 V System)
−3.0 V / 16 V
11 V / 25 V
Same as ISO 11898−2
Common Mode Bus Voltage
CAN_L:
−2.0 V (min)
2.5 V (nom)
CAN_H:
2.5 V (nom)
7.0 V (max)
Same as ISO 11898−2
Same as ISO 11898−2
Transmission Speed
1.0 Mb/s @ 40 m
125 kb/s @ 500 m
Same as ISO 11898−2
500 kb/s @ 100 m
125 kb/s @ 500 m
ESD
Not specified, recommended
w $8.0 kV (contact)
Not specified, recommended
w $8.0 kV (contact)
Not specified, recommended
w $8.0 kV (contact)
EMI Immunity
ISO 7637−3, pulses ‘a’ and ‘b’
IEC 61000−4−4 EFT
Same as ISO 11898−2
Popular Applications
Automotive, Truck, Medical
and Marine Systems
Industrial Control Systems
Industrial Control Systems
www.onsemi.com
4
NUP2105L, SZNUP2105L
EMI Specifications
61000−4 and ISO 7637 tests are similar; however, the IEC
standard was created as a generic test for any electronic
system, while the ISO 7637 standard was designed for
vehicular applications. The IEC61000−4−4 Electrical Fast
Transient (EFT) specification is similar to the ISO 7637−1
pulse 1 and 2 tests and is a requirement of SDS CAN
systems. The IEC 61000−4−5 test is used to define the power
absorption capacity of a TVS device and long duration
voltage transients such as lightning. Table 2 provides a
summary of the ISO 7637 and IEC 61000−4−X test
specifications. Table 3 provides the NUP2105L’s ESD
test results.
The EMI protection level provided by the TVS device can
be measured using the International Organization for
Standardization (ISO) 7637−1 and −3 specifications that are
representative of various noise sources. The ISO 7637−1
specification is used to define the susceptibility to coupled
transient noise on a 12 V power supply, while ISO 7637−3
defines the noise immunity tests for data lines. The ISO 7637
tests also verify the robustness and reliability of a design by
applying the surge voltage for extended durations.
The IEC 61000−4−X specifications can also be used to
quantify the EMI immunity level of a CAN system. The IEC
Table 2. ISO 7637 and IEC 61000−4−X Test Specifications
Test
Waveform
Pulse 1
Test Specifications
NUP2105L Test
Vs = 0 to −100 V
Imax = 10 A
Imax = 1.75 A
Vclamp_max = 31 V
tduration = 5000 pulses
tduration = 5000 pulses
ISO 7637−1
Vs = 0 to +100 V
Imax = 10 A
12 V Power Supply Lines
Pulse 2
Imax = 9.5 A
Vclamp_max = 33 V
tduration = 5000 pulses
tduration = 5000 pulses
ISO 7637−3
Imax = 50 A
Vclamp_max = 40 V
tduration = 60 minutes
tduration = 10 minutes
Vs = +40 V
Imax = 0.8 A
Pulse ‘b’
DUT in parallel with
inductive load that is
disconnected from power
supply.
DUT in series with inductor
that is disconnected.
Ri = 10 W, tr = 1.0 ms,
td_10% = 50 ms, t1 = 2.5 s,
t2 = 200 ms
Vs = −60 V
Imax = 1.2 A
Pulse ‘a’
Data Line EFT
Ri = 10 W, tr = 1.0 ms,
td_10% = 2000 ms, t1 = 2.5 s,
t2 = 200 ms, t3 = 100 ms
Simulated Noise Source
Switching noise of inductive
loads.
Ri = 50 W, tr = 5.0 ns,
td_10% = 0.1 ms, t1 = 100 ms,
t2 = 10 ms, t3 = 90 ms
tduration = 10 minutes
Vopen circuit = 2.0 kV
Ishort circuit = 40 A
(Level 4 = Severe Industrial
Environment)
IEC 61000−4−4
(Note 2)
Switching noise of inductive
loads.
Ri = 50 W, tr < 5.0 ns,
td_50% = 50 ns, tburst = 15 ms,
fburst = 2.0 to 5.0 kHz,
trepeat = 300 ms
tduration = 1 minute
Data Line EFT
Vopen circuit = 1.2/50 ms,
Ishort circuit = 8/20 ms
IEC 61000−4−5
Lightning, nonrepetitive
power line and load
switching
Ri = 50 W
1. DUT = device under test.
2. The EFT immunity level was measured with test limits beyond the IEC 61000−4−4 test, but with the more severe test conditions of
ISO 7637−3.
Table 3. NUP2105L ESD Test Results
ESD Specification
Human Body Model
IEC 61000−4−2
Test
Test Level
Pass / Fail
Contact
16 kV
Pass
Contact
30 kV (Note 3)
Pass
Non−contact (Air Discharge)
30 kV (Note 3)
Pass
3. Test equipment maximum test voltage is 30 kV.
www.onsemi.com
5
NUP2105L, SZNUP2105L
TVS Diode Protection Circuit
voltage of the diode that is reversed biased, plus the diode
drop of the second diode that is forwarded biased.
TVS diodes provide protection to a transceiver by
clamping a surge voltage to a safe level. TVS diodes have
high impedance below and low impedance above their
breakdown voltage. A TVS Zener diode has its junction
optimized to absorb the high peak energy of a transient
event, while a standard Zener diode is designed and
specified to clamp a steady state voltage.
Figure 7 provides an example of a dual bidirectional
TVS diode array that can be used for protection with the
high−speed CAN network. The bidirectional array is created
from four identical Zener TVS diodes. The clamping
voltage of the composite device is equal to the breakdown
CAN_H
CAN
Transceiver
CAN_L
CAN Bus
NUP2105L
Figure 7. High−Speed and Fault Tolerant CAN TVS
Protection Circuit
www.onsemi.com
6
NUP2105L, SZNUP2105L
PACKAGE DIMENSIONS
SOT−23 (TO−236)
CASE 318−08
ISSUE AP
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH
THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM
THICKNESS OF BASE MATERIAL.
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH,
PROTRUSIONS, OR GATE BURRS.
D
SEE VIEW C
3
HE
E
DIM
A
A1
b
c
D
E
e
L
L1
HE
q
c
1
2
b
0.25
e
q
A
L
A1
MIN
0.89
0.01
0.37
0.09
2.80
1.20
1.78
0.10
0.35
2.10
0°
MILLIMETERS
NOM
MAX
1.00
1.11
0.06
0.10
0.44
0.50
0.13
0.18
2.90
3.04
1.30
1.40
1.90
2.04
0.20
0.30
0.54
0.69
2.40
2.64
−−−
10 °
MIN
0.035
0.001
0.015
0.003
0.110
0.047
0.070
0.004
0.014
0.083
0°
INCHES
NOM
0.040
0.002
0.018
0.005
0.114
0.051
0.075
0.008
0.021
0.094
−−−
MAX
0.044
0.004
0.020
0.007
0.120
0.055
0.081
0.012
0.029
0.104
10°
STYLE 27:
PIN 1. CATHODE
2. CATHODE
3. CATHODE
L1
VIEW C
SOLDERING FOOTPRINT
0.95
0.037
0.95
0.037
2.0
0.079
0.9
0.035
SCALE 10:1
0.8
0.031
mm Ǔ
ǒinches
Honeywell and SDS are registered trademarks of Honeywell International Inc.
DeviceNet is a trademark of Rockwell Automation.
ON Semiconductor and the
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries.
SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed
at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation
or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and
specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets
and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each
customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended,
or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which
the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or
unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable
copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
7
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NUP2105L/D