NVMFS5C646NL D

NVMFS5C646NL
Power MOSFET
60 V, 4.7 mW, 93 A, Single N−Channel
Features
•
•
•
•
•
•
Small Footprint (5x6 mm) for Compact Design
Low RDS(on) to Minimize Conduction Losses
Low QG and Capacitance to Minimize Driver Losses
NVMFS5C646NLWF − Wettable Flank Option for Enhanced Optical
Inspection
AEC−Q101 Qualified and PPAP Capable
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
www.onsemi.com
V(BR)DSS
RDS(ON) MAX
4.7 mW @ 10 V
60 V
93 A
6.3 mW @ 4.5 V
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Symbol
Parameter
D (5,6)
Value
Unit
Drain−to−Source Voltage
VDSS
60
V
Gate−to−Source Voltage
VGS
±20
V
ID
93
A
Continuous Drain
Current RqJC
(Notes 1, 3)
TC = 25°C
Power Dissipation
RqJC (Note 1)
Continuous Drain
Current RqJA
(Notes 1, 2, 3)
Steady
State
TC = 100°C
TC = 25°C
Power Dissipation
RqJA (Notes 1 & 2)
Pulsed Drain Current
Steady
State
PD
ID
TA = 25°C, tp = 10 ms
Source Current (Body Diode)
N−CHANNEL MOSFET
A
20
MARKING
DIAGRAM
14
PD
TA = 100°C
Operating Junction and Storage Temperature
S (1,2,3)
W
79
40
TA = 100°C
TA = 25°C
G (4)
65
TC = 100°C
TA = 25°C
ID MAX
W
3.7
1.8
IDM
750
A
TJ, Tstg
−55 to
+175
°C
IS
100
A
Single Pulse Drain−to−Source Avalanche
Energy (IL(pk) = 5 A)
EAS
185
mJ
Lead Temperature for Soldering Purposes
(1/8″ from case for 10 s)
TL
260
°C
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
D
1
DFN5
(SO−8FL)
CASE 488AA
STYLE 1
S
S
S
G
D
XXXXXX
AYWZZ
D
D
XXXXXX = 5C646L
XXXXXX = (NVMFS5C646NL) or
XXXXXX = 646LWF
XXXXXX = (NVMFS5C646NLWF)
A
= Assembly Location
Y
= Year
W
= Work Week
ZZ
= Lot Traceability
THERMAL RESISTANCE MAXIMUM RATINGS
Symbol
Value
Unit
ORDERING INFORMATION
Junction−to−Case − Steady State
Parameter
RqJC
1.9
°C/W
Junction−to−Ambient − Steady State (Note 2)
RqJA
41
See detailed ordering, marking and shipping information in the
package dimensions section on page 5 of this data sheet.
1. The entire application environment impacts the thermal resistance values shown,
they are not constants and are only valid for the particular conditions noted.
2. Surface−mounted on FR4 board using a 650 mm2, 2 oz. Cu pad.
3. Maximum current for pulses as long as 1 second is higher but is dependent
on pulse duration and duty cycle.
© Semiconductor Components Industries, LLC, 2016
June, 2016 − Rev. 3
1
Publication Order Number:
NVMFS5C646NL/D
NVMFS5C646NL
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified)
Parameter
Symbol
Test Condition
Min
Drain−to−Source Breakdown Voltage
V(BR)DSS
VGS = 0 V, ID = 250 mA
60
Drain−to−Source Breakdown Voltage
Temperature Coefficient
V(BR)DSS/
TJ
Typ
Max
Unit
OFF CHARACTERISTICS
Zero Gate Voltage Drain Current
IDSS
Gate−to−Source Leakage Current
V
15.5
VGS = 0 V,
VDS = 60 V
mV/°C
TJ = 25 °C
10
TJ = 125°C
250
IGSS
VDS = 0 V, VGS = ±16 V
VGS(TH)
VGS = VDS, ID = 250 mA
±100
mA
nA
ON CHARACTERISTICS (Note 4)
Gate Threshold Voltage
Threshold Temperature Coefficient
VGS(TH)/TJ
Drain−to−Source On Resistance
Forward Transconductance
RDS(on)
1.2
2.0
−4.9
VGS = 10 V
ID = 50 A
3.8
4.7
VGS = 4.5 V
ID = 50 A
5.0
6.3
gFS
VDS = 15 V, ID = 50 A
V
mV/°C
105
mW
S
CHARGES, CAPACITANCES & GATE RESISTANCE
Input Capacitance
CISS
Output Capacitance
COSS
Reverse Transfer Capacitance
CRSS
2164
VGS = 0 V, f = 1 MHz, VDS = 25 V
900
pF
17
Total Gate Charge
QG(TOT)
VGS = 4.5 V, VDS = 30 V; ID = 25 A
15.7
Total Gate Charge
QG(TOT)
VGS = 10 V, VDS = 30 V; ID = 25 A
33.7
Threshold Gate Charge
QG(TH)
Gate−to−Source Charge
QGS
1.5
nC
5.6
VGS = 4.5 V, VDS = 30 V; ID = 25 A
Gate−to−Drain Charge
QGD
Plateau Voltage
VGP
5.1
2.8
td(ON)
10.4
V
SWITCHING CHARACTERISTICS (Note 5)
Turn−On Delay Time
Rise Time
Turn−Off Delay Time
Fall Time
tr
td(OFF)
VGS = 4.5 V, VDS = 30 V,
ID = 25 A, RG = 2.5 W
tf
14.9
ns
23.6
5.1
DRAIN−SOURCE DIODE CHARACTERISTICS
Forward Diode Voltage
Reverse Recovery Time
Charge Time
Discharge Time
Reverse Recovery Charge
VSD
VGS = 0 V,
IS = 50 A
TJ = 25°C
0.88
TJ = 125°C
0.78
tRR
ta
tb
1.2
V
40.9
VGS = 0 V, dIS/dt = 100 A/ms,
IS = 50 A
QRR
20.8
ns
20.1
32
nC
4. Pulse Test: pulse width v 300 ms, duty cycle v 2%.
5. Switching characteristics are independent of operating junction temperatures.
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
www.onsemi.com
2
NVMFS5C646NL
3.8 V
140 10 V to
4.5 V
120
3.6 V
100
3.4 V
80
3.2 V
60
3.0 V
40
2.8 V
TJ = 25°C
120
TJ = −55°C
100
80
60
40
20
20
0
0
0.5
1.0
1.5
2.0
2.5
0
3.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
VGS, GATE−TO−SOURCE VOLTAGE (V)
Figure 1. On−Region Characteristics
Figure 2. Transfer Characteristics
0.008
TJ = 25°C
ID = 50 A
0.007
0.006
0.005
0.004
0.003
3
4
5
6
7
8
9
10
RDS(on), DRAIN−TO−SOURCE RESISTANCE (W)
0
RDS(on), DRAIN−TO−SOURCE RESISTANCE (W)
TJ = 125°C
140
ID, DRAIN CURRENT (A)
ID, DRAIN CURRENT (A)
TYPICAL CHARACTERISTICS
4.0
0.007
TJ = 25°C
0.006
VGS = 4.5 V
0.005
VGS = 10 V
0.004
0.003
10
30
50
70
90
110
130
150
VGS, GATE VOLTAGE (V)
ID, DRAIN CURRENT (A)
Figure 3. On−Resistance vs. Gate−to−Source
Voltage
Figure 4. On−Resistance vs. Drain Current and
Gate Voltage
VGS = 10 V
ID = 40 A
1.7
TJ = 125°C
IDSS, LEAKAGE (nA)
RDS(on), NORMALIZED DRAIN−TO−
SOURCE RESISTANCE (W)
100,000
1.9
1.5
1.3
1.1
10,000
TJ = 85°C
1000
100
0.9
0.7
−50 −25
10
0
25
50
75
100
125
150
175
5
15
25
35
45
TJ, JUNCTION TEMPERATURE (°C)
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
Figure 5. On−Resistance Variation with
Temperature
Figure 6. Drain−to−Source Leakage Current
vs. Voltage
www.onsemi.com
3
55
NVMFS5C646NL
C, CAPACITANCE (pF)
VGS, GATE−TO−SOURCE VOLTAGE (V)
10
2400
CISS
2000
1600
VGS = 0 V
TJ = 25°C
f = 1 MHz
COSS
1200
800
400
CRSS
0
0
10
20
30
40
50
30
QT
25
8
20
6
15
QGD
QGS
4
10
VDS = 30 V
TJ = 25°C
ID = 25 A
2
5
0
0
0
60
4
8
12
16
20
24
28
32
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
QG, TOTAL GATE CHARGE (nC)
Figure 7. Capacitance Variation
Figure 8. Gate−to−Source and
Drain−to−Source Voltage vs. Total Charge
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
TYPICAL CHARACTERISTICS
1000
t, TIME (ns)
IS, SOURCE CURRENT (A)
45
VGS = 4.5 V
VDD = 30 V
ID = 25 A
td(off)
tf
100
tr
td(on)
10
40
TJ = 125°C
35
30
TJ = 25°C
25
20
15
TJ = −55°C
10
5
1
0
1
10
100
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
RG, GATE RESISTANCE (W)
VSD, SOURCE−TO−DRAIN VOLTAGE (V)
Figure 9. Resistive Switching Time Variation
vs. Gate Resistance
Figure 10. Diode Forward Voltage vs. Current
1000
100
TC = 25°C
VGS ≤ 10 V
0.01 ms
0.1 ms
10
1 ms
dc
TJ(initial) = 25°C
IPEAK (A)
IDS (A)
100
10 ms
10
TJ(initial) = 100°C
1
RDS(on) Limit
Thermal Limit
Package Limit
1
0.1
0.1
1
10
1E−04
100
1E−03
VDS (V)
TIME IN AVALANCHE (s)
Figure 11. Safe Operating Area
Figure 12. IPEAK vs. Time in Avalanche
www.onsemi.com
4
1E−02
NVMFS5C646NL
100
RqJA(t) (°C/W)
50% Duty Cycle
10
20%
10%
5%
1
2%
1%
NVMFS5C646NL 650 mm2, 2 oz., Cu Single Layer Pad
0.1
Single Pulse
0.01
0.000001
0.00001
0.0001
0.001
0.01
0.1
1
10
100
1000
PULSE TIME (sec)
Figure 13. Thermal Characteristics
DEVICE ORDERING INFORMATION
Device
Marking
Package
Shipping†
NVMFS5C646NLT1G
5C646L
DFN5
(Pb−Free)
1500 / Tape & Reel
NVMFS5C646NLWFT1G
646LWF
DFN5
(Pb−Free, Wettable Flanks)
1500 / Tape & Reel
NVMFS5C646NLT3G
5C646L
DFN5
(Pb−Free)
5000 / Tape & Reel
NVMFS5C646NLWFT3G
646LWF
DFN5
(Pb−Free, Wettable Flanks)
5000 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
www.onsemi.com
5
NVMFS5C646NL
PACKAGE DIMENSIONS
DFN5 5x6, 1.27P
(SO−8FL)
CASE 488AA
ISSUE M
2X
0.20 C
D
A
2
B
D1
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION D1 AND E1 DO NOT INCLUDE
MOLD FLASH PROTRUSIONS OR GATE
BURRS.
2X
0.20 C
4X
E1
2
q
E
c
1
2
3
DIM
A
A1
b
c
D
D1
D2
E
E1
E2
e
G
K
L
L1
M
q
A1
4
TOP VIEW
C
SEATING
PLANE
DETAIL A
0.10 C
A
0.10 C
SIDE VIEW
0.10
8X b
C A B
0.05
c
DETAIL A
RECOMMENDED
SOLDERING FOOTPRINT*
e/2
1
STYLE 1:
PIN 1. SOURCE
2. SOURCE
3. SOURCE
4. GATE
5. DRAIN
2X
0.495
e
L
MILLIMETERS
MIN
NOM
MAX
0.90
1.00
1.10
0.00
−−−
0.05
0.33
0.41
0.51
0.23
0.28
0.33
5.15
5.00
5.30
4.70
4.90
5.10
3.80
4.00
4.20
6.00
6.15
6.30
5.70
5.90
6.10
3.45
3.65
3.85
1.27 BSC
0.51
0.575
0.71
1.20
1.35
1.50
0.51
0.575
0.71
0.125 REF
3.00
3.40
3.80
0_
−−−
12 _
4.560
2X
1.530
4
K
3.200
E2
PIN 5
(EXPOSED PAD)
G
L1
4.530
M
D2
1.330
2X
0.905
1
BOTTOM VIEW
0.965
4X
1.000
4X 0.750
1.270
PITCH
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
6
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NVMFS5C646NL/D