ADP2301 Reference Design

ADP2301 Reference Design
Reference Design
PRD1140
FEATURES
Single Inverting Output: -5 V
Output Current: 0.5 A
Input voltage: 4.5-5.5 V
Low Ripple
DESCRIPTION
This ADP2301 Reference Design uses 4.5 V to 5.5 V for the input voltage. Design criteria are for small size and
low cost. The ripple is less than 1% of vout. Transient response varies over the load range and is not considered
high priority. The switching frequency is fixed at 1.4 MHz.
Table 1.
User Target Specs, Vout1
Spec
Target
Value
Actual
Value
Units
Vout
-5
-5
Volts
Iout
0.5
0.5
Amps
Tamb
50
50
degC
Vinmin
4.5
4.5
Volts
Vinmax
5.5
5.5
Volts
Table 2.
Default Design Target Specs, Vout1
Spec
Target
Value
Actual
Value
Units
Vout ripple max
0.050
0.030
Volts
Ioutstep
0.25
0.25
Apk
Vout step error
N/A
N/A
Volts
MaxHeight
5
2.4
mm
Rev. 0
Reference designs are as supplied “as is” and without warranties of any kind, express, implied, or
statutory including, but not limited to, any implied warranty of merchantability or fitness for a
particular purpose. No license is granted by implication or otherwise under any patents or other
intellectual property by application or use of reference designs. Information furnished by Analog
Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog
Devices for its use, nor for any infringements of patents or other rights of third parties that may
result from its use. Analog Devices reserves the right to change devices or specifications at any
time without notice. Trademarks and registered trademarks are the property of their respective
owners. Reference designs are not authorized to be used in life support devices or systems.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2009 Analog Devices, Inc. All rights reserved.
Reference Design
PRD1140
TABLE OF CONTENTS
Features ......................................................................................................................................................................1
Description .................................................................................................................................................................1
Revision History.........................................................................................................................................................2
Schematic ...................................................................................................................................................................3
Bill of Materials..........................................................................................................................................................3
TABLE OF FIGURES
Figure 1.
Inverting buck boost Schematic.............................................................................................................3
REVISION HISTORY
8/03/2009—Revision 0: Initial Version
Rev. 0 | Page 2 of 4
Reference Design
PRD1140
SCHEMATIC
Figure 1.
Inverting buck boost Schematic
4.5-5.5 V
Vin
Cbst
L1
BST
SW
U1
GND
Rfbl
Ren
ADP2301
FB
Cin
VIN
D1
Cout
Vout1
EN
Rfbh
BILL OF MATERIALS
Table 3.
Bill of Materials
Item
#
Des
Mfg
Part Number
Component Specs
1
U1
ADI
ADP2301
Current Mode Step Down DC/DC
Regulator
2
L1
Coilcraft
LPS6225-682MLC
6.8uH, 100mOhm 2x2 inductor
3
D1
Diodes
Inc.
B230A
4
Cin
Murata
5
Cout
6
Package
Qty
Area
(mm^2)
Height
(mm)
TSOT-6
1
8.12
1.0
6x6
1
36.0
2.4
Single,2A,30V Schottky
SMA
1
16.8
2.3
GRM31CR71C106K
10uF,16V,X7R,2mOhm
1206
1
5.1
1.6
Murata
GRM31CR60J226K
22uF,6.3V,X5R,2mOhm
1206
1
5.1
1.6
Cbst
Murata
GRM188R70J104KA01
100nF,6.3V,X7R
0603
1
1.3
0.8
7
Rfbh
Vishay
1% tolerance
22.1kohm
0603
1
1.3
0.5
8
Rfbl
Vishay
1% tolerance
4.12kohm
0603
1
1.3
0.5
9
Ren
Vishay
1% tolerance
10.0kohm
0603
1
1.3
0.5
9
76.3
2.4
Total:
Rev. 0 | Page 3 of 4
Cost
Reference Design
PRD1140
NOTES
©2009 Analog Devices, Inc. All rights reserved.
Trademarks and registered trademarks are the
property of their respective owners. Error! Unknow
Rev. 0 | Page 4 of 4