DPG High Reliability non hermetic products portfolio brochure ( 2015-02-11

Power Matters.™
HiRel Non-Hermetic Products Portfolio
Transient Voltage Suppressors
MOSFETs
IGBTs
Rectifiers
About Microsemi’s High-Reliability
Non-Hermetic Products
Standard commercial grade semiconductor testing may not
detect some types of problems such as cracked die or ionic
contamination. These and other defects lead to early life failures,
and screening for them is particularly important in large die
devices. Microsemi’s high-reliability Non-hermetic / Plastic
products under go through an “Up-screening Program”
Modeled on JANxxx Military Qualification Procedures uncover
these defects and reduce or eliminate the region of early life
failures. The tests are defined in MIL-PRF-19500, Appendix E,
Table III.
TRANSIENT VOLTAGE SUPPRESSORS
Introduction
- HiRel TVS Up-Screening Matrix
- TVS Diodes for Protection of Avionics
- Tutorial on TVS Device Selection
- TVS Symbols and Definitions
- High Reliability TVS Component Summary
SMB/SMC/SML Surface Mount Devices
- Features and Part Nomenclature
- SMB Electrical Characteristics and Pad Layout
- SMC Electrical Characteristics and Pad Layout
- SML Electrical Characteristics and Pad Layout
SMC Low Capacitance Surface Mount Devices
- Features and Part Nomenclature
- SMCxLCE 1.5kW Electrical Characteristics and Pad Layout
PLAD Surface Mount Devices
- Features and Part Nomenclature
- PLAD 6.5KP Electrical Characteristics
- PLAD 7.5KP Electrical Characteristics
- PLAD 15KP Electrical Characteristics
- PLAD 30KP Electrical Characteristics
P4KE/P6KE/1.5KE Axial Devices
- Features and Part Nomenclature
- P4KE Electrical Characteristics
- P5KE Electrical Characteristics
- P6KE Electrical Characteristics
- 1.5KE Electrical Characteristics
Microsemi’s high-reliability program also provides for date coding
and lot traceabilty of all devices, continuous reliability monitoring,
and controlled foundry, assembly, and test locations. Customers
are also provided a full Certificate of Conformance with every lot.
Any product changes are made only under a process/product
change notification process with the customer. We offer 3 levels of cost effective "up-screening" for more
robust applications, such as avionics flight hardware, where
even a very low level of device mortality is unacceptable.
The available screening processes are described in the
accompanying tables and are defined as MA, MXL and MX
screening processes. These screening processes are
recommended for all robust or harsh environmental applications,
and for all power levels. Microsemi customers do not need to
create Source Control Drawings nor define screening flows to
specify these up-screening options.
Examples: MA1.5KE48CA or MXSMLJ43CA
Custom flows are always available from Microsemi to support
application specific requirements.
LCE Low Capacitance Axial Devices
- Features and Part Nomenclature
- LCE Electrical Characteristics
5KP/15KP Axial Devices
- Features and Part Nomenclature
- 5KP Electrical Characteristics
- 15KP Electrical Characteristics
RT100KP Axial Devices
- Features and Part Nomenclature
- RT100KP Electrical Characteristics
MRT130KP Transient Voltage Suppressor
- Features and Electrical Characteristics
MRT65KP Transient Voltage Suppressor
- Features and Electrical Characteristics
4
5
6
7
7
8
9
10
11
12
13
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
MOSFETs, IGBTs and RECTIFIERS
Introduction to Power Products Up-Screening Program
High Voltage SMPS Transistors
- IGBTs (Insulated Gate Bipolar Transistors)
- PowerMOS 8 MOSFETs/FREDFETs
- Ultra Low Gate Charge MOSFETs
- COOLMOS™ MOSFETs
Diodes
- Ultra Fast Recovery Diodes
35 - 36
Package
48 - 49
Outline Drawings
37 - 39
40 - 42
43
44
45 - 47
“COOLMOS” comprises a new family of transistors developed by Infineon Technologies AG. “COOLMOS” is a trademark of Infineon Technologies AG.ASPM®, Power MOS V®, Power MOS 7® & T-MAX® are registered trademarks of Microsemi Corporation
Within the metal and composite shell of every jetliner, tens
of thousands of sensitive semiconductor components
perform critical functions from navigation to engine control.
Since aircraft are struck by lightning on average twice a
year, protection of sensitive electronic devices is essential.
High Reliability Non-Hermetic TVS
TVS Diodes for Transient Voltage Protection for
Avionics and Robust Environments or Applications
Microsemi Corporation (MSCC) is a world leader in the design, fabrication, qualification, and supply of Transient Voltage
Suppressors (TVS). Applications include military and medical equipment, telecommunications, computers and their
peripherals. Microsemi also provides protection to the electronics of engine control systems in the sophisticated avionics
and aerospace industries. The company offers a broad portfolio of both uni- and bi- directional discreet plastic TVS devices
with power levels from 600W to 130kW. The qualification test plans and reliability monitoring provided for all these products
are in line with the best industry standard practices.
Moly
Si Die
This catalog includes an exciting expansion in
Microsemi’s industry leading Plastic Large Area Device (PLAD) surface mount package offerings for TVS
devices. PLADs provide large exposed metal pads on
the bottom of the package with excellent direct internal
connection to the die – there are no wire bonds. This
Large Thermal Paths
provides a very low resistance thermal path, which is
much superior to axial leaded devices and is critical in PLAD provides large exposed metal pads on the bottom of the package
with excellent direct internal connection to the die (15KP and 30KP
meeting the expanding requirements for multi-stoke
family packages shown).
and multi-burst event protection in composite
body aircraft.
Multi-Stroke and Multi-Burst TVS Protection
Increasing emphasis is being placed on multi-stroke
and multi-burst lightening protection, particularly (but not
exclusively) in the protection of the growing proportion of
new aircraft being built with largely composite bodies.
Test standards for these hazards are defined by RTCA
standard DO-160. Microsemi’s high-reliability plastic
PLAD packaged TVS devices are uniquely suited to
address these requirements. Micronote 133 addresses
these requirements in detail, and is available at
www.microsemi.com.
HiRel TVS Up-Screening Matrix
Process, Screen or Test Description
Part Prefix:
Product Assurance Level Requirement
M
MA
MXL
MX
100% DC Electrical Test, Go/No-Go
R
R
R
R
3 Sigma lot norm of key parameters
R
R
R
R
Initial Surge Test
1x
1x
1x
1x
Post-surge Electrical Testing
R
R
R
R
Temperature Cycling Testing
10 Cycles 1
10 Cycles
20 Cycles
20 Cycles
3x
10x
10x
R
R
96 hours 3
96 hours 3
R
R
Post Temperature Cycling Surge
1x
1
Pre-HTRB Electrical Test, Read & Record
HTRB
24 hours 2
Interim Electrical Test, Read & Record
Final Electrical Test, Read & Record
go/no-go 1
R
R
Delta Calculations
go/no-go
R
R
PDA Evaluation
R
R
Group A Conformance Inspection
R
R
Group B Conformance Inspection
R
Group C Conformance Inspection
R
Certificate of Conformance
R
R - Required and performed based on MIL-PRF-19500 conditions and limits
1 – Tests performed on PLAD15KP, PLAD30KP, PLAD6.5KP and PLAD7.5KP only
2 – 24 hours for unidirectional. 24 hours each side for bidirectional.
3 – 96 hours for unidirectional. 48 hours each side for bidirectional.
4
R
R
R
First
Transient
Level
First
Transient
10 ms ≤ t ≤200 ms
Subsequent
Transient
Subsequent
Transient
Level
1
2
Subsequent
Transient
Subsequent Subsequent
Transient
Transient
13
3
14
1.5 seconds
One first transient followed by thirteen subsequent transients distributed
over a period of up to 1.5 seconds.
Multi-burst Test Specification
20 Transients
30 ms ≤ t ≤300 ms
Level
1
2
Time
3
5
High Reliability Non-Hermetic TVS
High Reliability Non-Hermetic TVS
Tutorial on TVS Component Selection
Q&A
To use the TVS selection tables in this brochure, you must be able to answer the following questions:
1. What is the continuous or repetitive peak operating voltage at the circuit location where the TVS will be placed to protect a sensitive load?
This will determine the “Working Standoff Voltage” (Vwm) and minimum “Breakdown Voltage” (Vbr) required of the TVS. Vwm is the voltage across the TVS in its “off”, non-conducting state. You typically match this to the nominal working voltage of the circuit you are protecting. Vbr is the voltage at which avalanche breakdown begins and the TVS starts conducting. Vbr must be greater than the high end of the tolerance range of the operating voltage of the circuit you are protecting.
2. What is the worst case transient waveform in peak impulse current and pulse shape the TVS needs to divert around the sensitive load?
This will determine the Peak Surge Current (Ipp) the TVS must handle, and the correct de-rating factor
(if any) required due to the pulse shape. See MicroNote 120.
3. What is the worst case peak voltage the sensitive load can withstand for the pulse duration in
item #2 above?
This will determine the minimum Clamping Voltage (Vc) required of the TVS. This is the voltage across the TVS at the Peak Surge Current (Ipp).
4. What is the repetitive peak pulse power dissipation required?
This will determine the “Peak Pulse Power” (Ppp) required of the TVS. It is equal to Ipp x Vc. 5. Is the required VC lower in value than available on the data sheet for the VWM described in item #1?
If the answer is yes, oversizing the PPP selection for a given pulse condition will reduce VC and bring it closer to VBR and VWM. Also see MicroNote 108.
6. What package style is needed – Axial or Surface Mount?
Symbol
VWM
VBR
PPP
ID
IPP
C
SYMBOLS AND DEFINITIONS
Definition
Working Standoff Voltage: The voltage across the TVS in its off, non-conducting state.
Breakdown Voltage: The minimum voltage at which avalanche breakdown begins and the TVS
starts conducting.
Peak Pulse Power: The peak power that can be applied for a specific pulse width and waveform.
Standby Current: The maximum current that will flow at VWM.
Peak Pulse Current: The peak current that can be applied for a specified pulse width and waveform.
Capacitance: The capacitance in picofarads of the TVS as defined and at 0V at a frequency of 1MHz.
HIGH RELIABILITY TVS COMPONENT SUMMARY
The table below summarizes the Microsemi range of high-reliability TVS devices, while the images
illustrate the package sizes. New families and packages will shortly be added to the product range.
Product
Family
SMB
SMC
SMCxLCE
SML
PLAD6.5KP
PLAD7.5KP
PLAD15KP
PLAD30KP
P4KE
P6KE
1.5KE
LCE
5KP
15KP
RT100KP
PK5E
SMBJSAC
RT130KP
RT65KP
SMBG2K
Rated
Standoff
Voltage VWM
5.0V - 170V
5.0V - 170V
6.5V - 170V
5.0V - 170V
10V - 48V
10V - 48V
7.0V - 200V
14V - 400V
5.8V - 342V
5.8V - 171V
5.8V - 324V
6.5V - 170V
5V - 110V
22V - 280V
40V - 400V
5.0V - 170V
5.0V - 75V
275V - 295V
48V - 75V
3.0V - 5.0V
Minimum
Breakdown
Voltage
VBR
6.4V - 189V
6.4V - 189V
7.22V - 189V
6.4V - 189V
11.1V - 189V
11.1V - 189V
7.78V - 222V
15.6V - 444V
6.45V - 380V
6.45V - 190V
6.45V - 380V
7.22V - 189V
6.4V - 122V
24.4V - 311V
44.4V - 444V
6.4V - 189V
7.60V - 83.3V
300V
53.3V - 83.3V
4.3V - 5.9V
Peak
Pulse
Power
Rating
600W
1.5kW
1.5kW
3kW
6.5kW
7.5kW
15kW
30kW
400W
600W
1.5kW
1.5kW
5kW
15kW
100kW
500W
500W
130kW
65kW
300 - 2000W
SMD/Axial
Package
SMD
SMD
SMD
SMD
SMD
SMD
SMD
SMD
Axial
Axial
Axial
Axial
Axial
Axial
Axial
Axial
SMD
Axial
Axial
SMD
DO-214AA, DO-215AA
DO-214AB, DO-215AB
DO-214AB, DO-215AB
DO-214AB, DO-215AB
mini-PLAD
mini-PLAD
PLAD
PLAD
DO-41 [DO-204AL]
T-18
Case 1
Case 1
Case 5A [DO-204AR]
Case 5A [DO-204AR]
Case 5A [DO-204AR]
DO41 [DO-204AL]
DO-214AA
Case 5A [DO-204AR]
Case 5A [DO-204AR]
DO-214AA, DO-215AA
7. Is the pulse shape and duration different than that for which Ppp is specified, or is the waveform of the threat difficult to define?
Ppp is typically rated for one of two standard exponential waveforms – 8/20 μs (8 μs rise time, 20 μs fall time to 50% of peak current) or 10/1000 μs. Shorter or longer pulses or different pulse shapes will increase or decrease the peak power the TVS can safely dissipate. See MicroNote 125 for general recommendations regarding industry standards on protection, and MicroNote 120 for advice on adjusting for various waveforms.
SMB
SMC/L
mini-PLAD
P4KE
PLAD
P6KE
1.5KE
LCE
5KP
15KP
RT100KP
The following pages detail the range of High-Reliability Plastic TVS devices available. Refer to the applicable
datasheets for more comprehensive information. All Microsemi technical documents are located on Microsemi's
website: www.microsemi.com.
6
7
SMB/SMC/SML Surface Mount Devices
SMB Surface Mount Devices (SMDs)
H I G H R E L I A B I L I T Y P L A S T I C T V S S E L E C T I O N G U I D E
H I G H R E L I A B I L I T Y P L A S T I C T V S S E L E C T I O N G U I D E
SMB/SMC/SML
Surface
Devices
SMx Surface Mount
Devices from
theMount
Discrete
Products Group (DPG)
FEATURES
•
•
•
•
•
SMB 600 WATT, ALL ELECTRICAL CHARACTERISTICS @ 25 °C
APPEARANCE
TYPE NUMBER
Peak Pulse Power at 10/1000µS
o SMB series – 600W
o SMC series – 1500W
o SML series – 3000W
Standoff voltages of 5V to 170V
Operational and Storage Temperature of -65°C to +150°C
Unidirectional and Bidirectional versions available
Available in Gull-Wing and modified J-lead lead forming designs
SMBx5.0A
SMBx6.0A
SMBx6.5A
SMBx7.0A
SMBx7.5A
SMBx8.0A
SMBx8.5A
SMBx9.0A
SMBx10A
SMBx11A
SMBx12A
SMBx13A
SMBx14A
SMBx15A
SMBx16A
SMBx17A
SMBx18A
SMBx20A
SMBx22A
SMBx24A
SMBx26A
SMBx28A
SMBx30A
SMBx33A
SMBx36A
SMBx40A
SMBx43A
SMBx45A
SMBx48A
SMBx51A
SMBx54A
SMBx58A
SMBx60A
SMBx64A
SMBx70A
SMBx75A
SMBx78A
SMBx85A
SMBx90A
SMBx100A
SMBx110A
SMBx120A
SMBx130A
SMBx150A
SMBx160A
SMBx170A
PART NOMENCLATURE
MX
SM
C
G
5.0
(C)
A
(e3)
RoHS Compliance
e3 = RoHS Compliant
Blank = non-RoHS Compliant
Reliability Level
M = M Level
MA = MA Level
MX = MX Level
MXL = MXL Level
Breakdown Voltage Tolerance
A = 5%
Package Type
SM = Surface Mount
Uni/Bidirectional
C = Bidirectional
Blank = Unidirectional
Power Level
B = 600W
C = 1500W
L = 3000W
Breakdown Voltage Tolerance
See Tables below
Lead Frame
G = Gull Wing
J = Modified J bend
Sample Part Number
MXLSMLG36CA – MXL screened surface mount 3kW device, Gull Wing, 36V stand-off, bi-directional, 5% tolerance and non-RoHS compliant.
PACKAGE DIMENSIONS
J BEND
GULL WING
Circuit Breaker Options
MIN
MAX
DC
Avionics IN INCHES
SMC/SML PACKAGE DIMENSIONS
(DO-214AB/(DO-215AB)
Package
A
B
C
D
E
F
K
MIN
.115 .260
.220 .305
.077
.380
.025
MAX
.121 .280
.245 .320
.110
.400
.040
DIMENSIONS IN MILLIMETERS
MIN
2.92 6.60
5.59 7.75
1.95
9.65 0.635
MAX Protection
3.07 7.11
6.22 8.13
2.80 10.16 1.016
Supply
8
.760
1.520
L
.030
.060
.760
1.520
BREAKDOWN
CURRENT
IBR
MAXIMUM
CLAMPING
VOLTAGE
@ IPP
VC
PEAK
PULSE
CURRENT
IPP
Volts
Volts
mA
Volts
Amps
μA
10
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9.2
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103
113
121
126
137
146
162
177
193
209
243
259
275
65.2
58.3
53.6
50.0
46.5
44.1
41.7
39.0
35.3
33.0
30.2
27.9
25.8
24.0
23.1
21.7
20.5
18.5
16.9
15.4
14.2
13.2
12.4
11.3
10.3
9.3
8.6
8.3
7.7
7.3
6.9
6.4
6.2
5.8
5.3
4.9
4.7
4.4
4.1
3.7
3.4
3.1
2.9
2.5
2.3
2.2
800
800
500
200
100
50
10
5
5
5
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5.0
6.0
6.5
7.0
7.5
8.0
8.5
9.0
10
11
12
13
14
15
16
17
18
20
22
24
26
28
30
33
36
40
43
45
48
51
54
58
60
64
70
75
78
85
90
100
110
120
130
150
160
170
6.40
6.67
7.22
7.78
8.33
8.89
9.44
10.0
11.1
12.2
13.3
14.4
15.6
16.7
17.8
18.9
20.0
22.2
24.4
26.7
28.9
31.1
33.3
36.7
40.0
44.4
47.8
50.0
53.3
56.7
60.0
64.4
66.7
71.1
77.8
83.3
86.7
94.4
100
111
122
133
144
167
178
189
MAXIMUM
STANDBY
CURRENT
@ VWM
ID
PAD LAYOUT
SMBJ (DO-214AA)
A
SMB/SMC/SML
28V
Aircraft
Bus
L
.030
.060
MINIMUM
BREAKDOWN
VOLTAGE
VBR
MIN @ IBR
C
A
B
C
INCHES
.260
.085
.110
mm
6.60
2.16
2.79
B
9
SMBG (DO-215AA)
A
B
C
INCHES
.320
.085
.110
mm
8.13
2.16
2.79
SMB/SMC/SML
MIN
MAX
SMB PACKAGE DIMENSIONS IN INCHES
(DO-214AA/DO-215AA)
A
B
C
D
E
F
K
.077 .160
.130 .205
.077
.235
.015
.083 .180
.155 .220
.104
.255
.030
DIMENSIONS IN MILLIMETERS
1.95 4.06
3.30 5.21
1.95
5.97
.381
2.10 4.57
3.94 5.59
2.65
6.48
.762
REVERSE
STAND-OFF
VOLTAGE
VWM
SMC Surface Mount Devices (SMDs)
SML Surface Mount Devices (SMDs)
H I G H R E L I A B I L I T Y P L A S T I C T V S S E L E C T I O N G U I D E
H I G H R E L I A B I L I T Y P L A S T I C T V S S E L E C T I O N G U I D E
SMC 1.5kW, ALL ELECTRICAL CHARACTERISTICS @ 25 °C
TYPE NUMBER
SMCx5.0A
SMCx6.0A
SMCx6.5A
SMCx7.0A
SMCx7.5A
SMCx8.0A
SMCx8.5A
SMCx9.0A
SMCx10A
SMCx11A
SMCx12A
SMCx13A
SMCx14A
SMCx15A
SMCx16A
SMCx17A
SMCx18A
SMCx20A
SMCx22A
SMCx24A
SMCx26A
SMCx28A
SMCx30A
SMCx33A
SMCx36A
SMCx40A
SMCx43A
SMCx45A
SMCx48A
SMCx51A
SMCx54A
SMCx58A
SMCx60A
SMCx64A
SMCx70A
SMCx75A
SMCx78A
SMCx85A
SMCx90A
SMCx100A
SMCx110A
SMCx120A
SMCx130A
SMCx150A
SMCx160A
SMCx170A
SML 3kW, ALL ELECTRICAL CHARACTERISTICS @ 25 °C
REVERSE
STAND-OFF
VOLTAGE
VWM
MINIMUM
BREAKDOWN
VOLTAGE
VBR
MIN @ IBR
BREAKDOWN
CURRENT
IBR
MAXIMUM
CLAMPING
VOLTAGE
@ IPP
VC
PEAK
PULSE
CURRENT
IPP
Volts
Volts
mA
Volts
Amps
μA
10
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9.2
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103.0
113
121
126
137
146
162
177
193
209
243
259
275
163.0
145.6
133.9
125.0
116.3
110.3
104.2
97.4
88.2
82.4
75.3
69.7
64.7
61.5
57.7
53.3
51.4
46.3
42.2
38.6
35.6
33.0
31.0
28.1
25.8
23.2
21.6
20.6
19.4
18.2
17.2
16.0
15.5
14.6
13.3
12.4
11.4
10.4
10.3
9.3
8.4
7.8
7.2
6.2
5.8
5.5
1000
1000
500
200
100
50
20
10
5
5
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5.0
6.0
6.5
7.0
7.5
8.0
8.5
9.0
10
11
12
13
14
15
16
17
18
20
22
24
26
28
30
33
36
40
43
45
48
51
54
58
60
64
70
75
78
85
90
100
110
120
130
150
160
170
6.40
6.67
7.22
7.78
8.33
8.89
9.44
10.0
11.1
12.2
13.3
14.4
15.6
16.7
17.8
18.9
20.0
22.2
24.4
26.7
28.9
31.1
33.3
36.7
40.0
44.4
47.8
50.0
53.3
56.7
60.0
64.4
66.7
71.1
77.8
83.3
86.7
94.4
100
111
122
133
144
167
178
189
MAXIMUM
STANDBY
CURRENT
@ VWM
ID
TYPE NUMBER
SMLx5.0A
SMLx6.0A
SMLx6.5A
SMLx7.0A
SMLx7.5A
SMLx8.0A
SMLx8.5A
SMLx9.0A
SMLx10A
SMLx11A
SMLx12A
SMLx13A
SMLx14A
SMLx15A
SMLx16A
SMLx17A
SMLx18A
SMLx20A
SMLx22A
SMLx24A
SMLx26A
SMLx28A
SMLx30A
SMLx33A
SMLx36A
SMLx40A
SMLx43A
SMLx45A
SMLx48A
SMLx51A
SMLx54A
SMLx58A
SMLx60A
SMLx64A
SMLx70A
SMLx75A
SMLx78A
SMLx85A
SMLx90A
SMLx100A
SMLx110A
SMLx120A
SMLx130A
SMLx150A
SMLx160A
SMLx170A
REVERSE
STAND-OFF
VOLTAGE
VWM
MINIMUM
BREAKDOWN
VOLTAGE
VBR
MIN @ IBR
BREAKDOWN
CURRENT
IBR
MAXIMUM
CLAMPING
VOLTAGE
@ IPP
VC
PEAK
PULSE
CURRENT
IPP
Volts
Volts
mA
Volts
Amps
μA
10
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
9.2
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103
113
121
126
137
146
162
177
193
209
243
259
275
326.0
291.3
267.9
250.0
232.6
220.6
208.4
194.8
176.4
164.8
150.6
139.4
129.4
123.0
115.4
106.6
102.8
92.6
84.4
77.2
71.2
66.0
62.0
56.2
51.6
46.4
43.2
41.2
38.8
36.4
34.4
32.0
31.0
29.2
26.6
24.8
22.8
20.8
20.6
18.6
16.8
15.6
14.4
12.4
11.6
11.0
1000
1000
500
200
100
50
25
10
5
5
5
5
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
5.0
6.0
6.5
7.0
7.5
8.0
8.5
9.0
10
11
12
13
14
15
16
17
18
20
22
24
26
28
30
33
36
40
43
45
48
51
54
58
60
64
70
75
78
85
90
100
110
120
130
150
160
170
6.40
6.67
7.22
7.78
8.33
8.89
9.44
10.0
11.1
12.2
13.3
14.4
15.6
16.7
17.8
18.9
20.0
22.2
24.4
26.7
28.9
31.1
33.3
36.7
40.0
44.4
47.8
50.0
53.3
56.7
60.0
64.4
66.7
71.1
77.8
83.3
86.7
94.4
100
111
122
133
144
167
178
189
PAD LAYOUT
mm
9.90
2.79
3.81
B
10
SMCG (DO-215AB)
A
B
C
INCHES
.510
.110
.150
mm
12.95
2.79
3.81
SMLJ (DO-214AB)
A
C
A
B
C
INCHES
.390
.110
.150
B
11
mm
9.90
2.79
3.81
SMLG (DO-215AB)
A
B
C
INCHES
.510
.110
.150
mm
12.95
2.79
3.81
SMB/SMC/SML
C
A
B
C
INCHES
.390
.110
.150
PAD LAYOUT
SMB/SMC/SML
SMCJ (DO-214AB)
A
MAXIMUM
STANDBY
CURRENT
@ VWM
ID
SMCxLCE Surface Mount Devices (SMDs)
MSMBG Surface Mount Devices (SMDs)
Low Capacitance 1.5kW SMDs from the Discrete Products Group (DPG)
FEATURES
•
•
•
•
•
•
•
Low Capacitance 2.5kW SMDs from the Discrete Products Group (DPG)
FEATURES
APPEARANCE
•
•
•
•
1500W Peak Pulse Power at 10/1000µS
Standoff voltages of 6.5V to 170V
Operational and Storage Temperature of -65°C to +150°C
Unidirectional versions only
Available in Gull-Wing and modified J-lead lead forming designs
Uses a rectifier diode in series and in the opposite direction of the protection diode
to lower device capacitance
Replaces axial LCE devices for surface mount applications
•
•
•
High reliability upscreened devices with wafer fabrication and assembly lot traceability.
All devices 100% surge tested.
Suppresses transients up to 2 kW @ 8/20 µs.
Other screening in reference to MIL-PRF-19500 is also available. Refer to MicroNote 129
for more details on the screening options. (See part nomenclature for all options.)
Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B.
3σ lot norm screening performed on standby current ID.
RoHS compliant versions available.
PART NOMENCLATURE
PART NOMENCLATURE
MX
SM
C
G
LCE
6.5
A
APPEARANCE
M
(e3)
RoHS Compliance
e3 = RoHS Compliant
Blank = non-RoHS Compliant
Reliability Level
M = M Level
MA = MA Level
MX = MX Level
MXL = MXL Level
Breakdown Voltage Tolerance
A = 5%
Package Type
SM = Surface Mount
SM
B
G
2K 3.0
(e3)
Reliability Level*
M
MA
MX
MXL
*(see MicroNote 129)
RoHS Compliance
e3 = RoHS Compliant
Blank = non-RoHS Compliant
Stand-Off Voltage (VWM)
(see Electrical Characteristics
table)
Surface Mount Package
2 kW Transient Suppression
Package Size
Power Level
C = 1500W
Reverse Standoff Voltage
See Tables below
Lead Frame
G = Gull Wing
J = Modified J bend
Lead Form
G = Gull-Wing
J = J-Bend
Low Capacitance
LCE = Low Capacitance
ELECTRICAL CHARACTERISTICS @ 25oC
Sample Part Number
MXSMCJLCE6.5Ae3 – MX screened surface mount 1.5kW device, J bend, 6.5V stand-off, uni-directional low capacitance, 5% tolerance and RoHS compliant.
PART NUMBER
TVS
+
OUT
DIODE
IN
+
TVS with internal low
capacitance rectifier diode
Optional Unidirectional
configuration (TVS and
separate rectifier diode in
parallel)
12
Gull-Wing
MSMBG2K3.0
MSMBG2K3.3
MSMBG2K4.0
MSMBG2K4.5
MSMBG2K5.0
J-Bend
MSMBJ2K3.0
MSMBJ2K3.3
MSMBJ2K4.0
MSMBJ2K4.5
MSMBJ2K5.0
BREAKDOWN
VOLTAGE
Minimum
BREAKDOWN
CURRENT
RATED
STANDOFF
VOLTAGE
V(BR)
I(BR)
VWM
V
mA
V
4.3
4.6
5.0
5.4
5.9
50
50
50
50
50
3.0
3.3
4.0
4.5
5.0
Optional Bidirectional
configuration ( two TVS
devices in parallel)
13
MAX
MAX
PEAK
TEMPERATURE
STANDBY CLAMPING PULSE
COEFFICIANT
of V(BR)
CURRENT VOLTAGE CURRENT
ID @ VWM VC @ IPP
μA
1500
700
400
50
5
IPP
V
A
5.4
5.8
6.3
6.6
7.6
10
10
10
10
10
V(BR)
%/ C
+0/ -0.05
±0.025
±0.030
±0.040
+0.050
o
SMBJSAC Surface Mount Devices (SMDs)
SMCxLCE Surface Mount Devices (SMDs)
H I G H R E L I A B I L I T Y P L A S T I C T V S S E L E C T I O N G U I D E
SMCxLCE 1.5kW, ALL ELECTRICAL CHARACTERISTICS @ 25 °C
TYPE
NUMBER
MINIMUM
PEAK
MAXIMUM
REVERSE
BREAKDOWN MAXIMUM
PULSE
STANDBY
STAND-OFF BREAKDOWN CURRENT
CLAMPING
VOLTAGE
VOLTAGE
IBR
VOLTAGE CURRENT CURRENT
VBR
IPP
@ VWM
VWM
@IPP
MIN @ IBR
VC
ID
SMCxLCE6.5A
SMCxLCE7.0A
SMCxLCE7.5A
SMCxLCE8.0A
SMCxLCE8.5A
SMCxLCE9.0A
SMCxLCE10A
SMCxLCE11A
SMCxLCE12A
SMCxLCE13A
SMCxLCE14A
SMCxLCE15A
SMCxLCE16A
SMCxLCE17A
SMCxLCE18A
SMCxLCE20A
SMCxLCE22A
SMCxLCE24A
SMCxLCE26A
SMCxLCE28A
SMCxLCE30A
SMCxLCE33A
SMCxLCE36A
SMCxLCE40A
SMCxLCE43A
SMCxLCE45A
SMCxLCE48A
SMCxLCE51A
SMCxLCE54A
SMCxLCE58A
SMCxLCE60A
SMCxLCE64A
SMCxLCE70A
SMCxLCE75A
SMCxLCE80A
SMCxLCE90A
SMCxLCE100A
SMCxLCE110A
SMCxLCE120A
SMCxLCE130A
SMCxLCE150A
SMCxLCE160A
SMCxLCE170A
Low Capacitance 1.5kW SMDs from the Discrete Products Group (DPG)
MAX
CAP
@ 0 Volts
f=1 MHZ
WORKING
INVERSE
BLOCKING
VOLTAGE
VWIB
INVERSE
BLOCKING
LEAKAGE
CURRENT
IIB
Volts
Volts
mA
Volts
Amps
µA
pF
Volts
µA
6.5
7.0
7.5
8.0
8.5
9.0
10
11
12
13
14
15
16
17
18
20
22
24
26
28
30
33
36
40
43
45
48
51
54
58
60
64
70
75
80
90
100
110
120
130
150
160
170
7.22
7.78
8.33
8.89
9.44
10.0
11.1
12.2
13.3
14.4
15.6
16.7
17.8
18.9
20.0
22.2
24.4
26.7
28.9
31.1
33.3
36.7
40.0
44.4
47.8
50.0
53.3
56.7
60.0
64.4
66.7
71.1
77.8
83.3
88.7
100
111
122
133
144
167
178
189
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.5
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103
113
121
129
146
162
178
193
209
243
259
275
100
100
100
100
100
97
88
82
75
70
65
61
57
49
51
46
42
39
36
33
31
28.1
25.8
23.3
21.6
20.6
19.4
18.2
17.2
16.0
15.5
14.6
13.3
12.4
11.6
10.3
9.3
8.4
7.8
7.2
6.2
5.8
5.4
1000
500
250
100
50
10
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
90
90
90
90
90
90
90
90
90
90
90
90
90
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
150
150
150
150
150
150
150
150
150
150
150
300
300
300
300
300
300
300
300
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
FEATURES
PEAK
INVERSE
BLOCKING
VOLTAGE
VPIB
•
•
•
Volts
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
200
200
200
200
200
200
200
200
200
200
200
200
200
400
400
400
400
400
400
•
•
•
•
•
APPEARANCE
High reliability controlled devices with wafer fabrication and assembly lot traceability
100% surge tested devices
Optional up screening available by replacing the M prefix with MA, MX or MXL.
These prefixes specify various screening and conformance inspection options based on
MIL-PRF-19500. Refer to MicroNote 129 for more details on the screening options
Low capacitance performance of 30pF
Suppresses transients up to 500 W Peak Pulse Power @ 10/1000
Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B
RoHS compliant devices available by adding an “e3” suffix
3σ lot norm screening performed on Standby Current ID
MSMBJSAC5.0 thru MSMBJSAC75, e3, ALL ELECTRICAL CHARACTERISTICS @ 25 °C
MICROSEMI PART
NUMBER
MSMBJSAC5.0
MSMBJSAC6.0
MSMBJSAC7.0
MSMBJSAC8.0
MSMBJSAC8.5
MSMBJSAC10
MSMBJSAC12
MSMBJSAC15
MSMBJSAC18
MSMBJSAC22
MSMBJSAC26
MSMBJSAC36
MSMBJSAC45
MSMBJSAC50
MSMBJSAC75
REVERSE
STAND-OFF
VOLTAGE
(Note 1)
VWM
Volts
5.0
6.0
7.0
8.0
8.5
10
12
15
18
22
26
36
45
50
75
BREAKDOWN
VOLTAGE
@ I(BR) 1.0mA
V(BR)
Volts
Min.
7.60
7.90
8.33
8.89
9.44
11.10
13.30
16.70
20.00
24.40
28.90
40.0
50.00
55.50
83.3
MAXIMUM
STANDBY
CURRENT
@VWM
ID
μA
300
300
300
100
50
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
MAXIMUM
CLAMPING
VOLTAGE
IP = 5.0A*
VC
MAXIMUM
PEAK PULSE
CURRENT*
RATING
IPP
Volts
Amps
10.0
11.2
12.6
13.4
14.0
16.3
19.0
23.6
28.8
35.4
42.3
60.0
77.0
88.0
121
MAXIMUM
CAPACITANCE
@ O Volts,
f=1 MHz
WORKING
INVERSE
BLOCKING
VOLTAGE
VWIB
pF
Volts
44
41
38
36
34
29
25
20
15
14
11.1
8.6
6.8
5.8
4.1
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
75
75
75
75
75
75
75
75
75
75
75
75
150
150
150
SMCJ (DO-214AB)
C
B
14
mm
9.90
2.79
3.81
Note 1: A transient voltage suppressor is normally selected according to voltage (VWM), that should be equal to or greater than the dc or continuous peak
operating voltage level.
Note 2: When pulse testing, test in TVS avalanche direction. Do not pulse in “forward” direction. See section for “Schematic Applications” herein.
PAD LAYOUT
SMCG (DO-215AB)
A
B
C
INCHES
.510
.110
.150
mm
12.95
2.79
3.81
Volts
100
100
100
100
100
100
100
100
100
100
100
100
200
200
200
Clamping Factor: The ratio of the numerical value of VC to V(BR) is typically 1.4 @ full rated power, 1.20 @ 50% rated power. Also see MicroNote 108.
SMBJ (DO-214AA)
SMB/SMC/SML
A
B
C
INCHES
.390
.110
.150
μA
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
PEAK INVERSE
BLOCKING
VOLTAGE
VPIB
*See Figure 3. For the MSMBJSAC75, the maximum clamping voltage VC is at the maximum rated Peak Pulse Current (IPP) of 4.1 Amps.
PAD LAYOUT
A
INVERSE
BLOCKING
LEAKAGE
CURRENT
IIB @ VWIB
A
B
C
15
INCHES
.260
.085
.110
mm
6.60
2.16
2.79
PLAD Surface Mount Devices
PLAD Surface Mount Devices
H I G H R E L I A B I L I T Y P L A S T I C T V S S E L E C T I O N G U I D E
SURFACE
MOUNT
DEVICES
PLAD Surface Mount PLAD
Devices
from the
Discrete
Products Group (DPG)
FEATURES
•
•
•
•
•
PLAD6.5KP 6.5kW, ALL ELECTRICAL CHARACTERISTICS @ 25º C
APPEARANCE
Peak Pulse Power at 10/1000µS
o PLAD6.5KP series – 6.5kW
o PLAD7.5KP series – 7.5kW
o PLAD15KP series – 15kW
o PLAD30KP series – 30kW
Standoff voltage
o PLAD6.5KP – 10V to 48V
o PLAD7.5KP – 10V to 48V
o PLAD15KP – 7V to 200V
o PLAD30KP – 14V to 400V
Operational and Storage Temperature of -65°C to +150°C
Unidirectional and Bidirectional versions available
Replaces high power through-hole devices for surface mount applications
PLAD15KP
22
(C)
Reliability Level
M = M Level
MA = MA Level
MX = MX Level
MXL = MXL Level
A
PLAD
mini-PLAD
(e3)
RoHS Compliance
e3 = RoHS Compliant
Blank = non-RoHS Compliant
Breakdown Voltage
Tolerance
A = 5%
Package Type
PLAD6.5KP = 6.5kW
PLAD7.5KP = 8kW
PLAD15KP = 15kW
PLAD30KP = 30kW
MINIMUM
BREAKDOWN
VOLTAGE
VBR
MIN @ IBR
BREAKDOWN
CURRENT
IBR
MAXIMUM
CLAMPING
VOLTAGE
@ IPP
VC
PEAK
PULSE
CURRENT
IPP
MAXIMUM
STANDBY
CURRENT
@ VWM
ID
Volts
Volts
mA
Volts
Amps
μA
PLAD6.5KP10A
PLAD6.5KP11A
10
11
11.1 - 12.3
12.2 - 13.5
5
5
17.0
18.2
383
358
15
10
PLAD6.5KP12A
PLAD6.5KP13A
12
13
13.3 - 14.7
14.4 - 15.9
5
5
19.9
21.5
327
302
10
10
PLAD6.5KP14A
PLAD6.5KP15A
14
15
15.6 - 17.2
16.7 - 18.5
5
5
23.2
24.4
280
267
10
10
PLAD6.5KP16A
PLAD6.5KP17A
16
17
17.8 - 19.7
18.9 - 20.9
5
5
26.0
27.6
250
236
10
10
PLAD6.5KP18A
PLAD6.5KP20A
18
20
20.0 - 22.1
22.2 - 24.5
5
5
29.2
32.4
223
202
10
10
PLAD6.5KP22A
PLAD6.5KP24A
22
24
24.4 - 26.9
26.7 - 29.5
5
5
35.5
38.9
183
167
10
10
PLAD6.5KP26A
PLAD6.5KP28A
26
28
28.9 - 31.9
31.1 - 34.4
5
5
42.1
45.5
154
143
10
10
PLAD6.5KP30A
PLAD6.5KP33A
30
33
33.3 - 36.8
36.7 - 40.6
5
5
48.4
53.3
135
123
10
10
PLAD6.5KP36A
PLAD6.5KP40A
36
40
40.0 - 44.2
44.4 - 49.1
5
5
58.1
64.5
111
101
10
10
PLAD6.5KP43A
PLAD6.5KP45A
43
45
47.8 - 52.8
50.0 – 55.3
5
5
69.4
72.7
93
89
10
10
PLAD6.5KP48A
48
53.3 – 58.9
5
77.4
85
10
TYPE NUMBER
PART NOMENCLATURE
MX
REVERSE
STAND-OFF
VOLTAGE
VWM
Uni/Bidirectional
C = Bidirectional
Blank = Unidirectional
Breakdown Voltage Tolerance
See Tables below
Sample Part Number
MXPLAD15KP9.0Ae3 – MX screened PLAD 15kW device, 9V reverse stand-off, uni-directional, 5% tolerance and RoHS
compliant
DC
Motor
PLAD
24 V
DC
EMI Limiting
16
17
PLAD Surface Mount Devices
PLAD Surface Mount Devices
H I G H R E L I A B I L I T Y P L A S T I C T V S
PLAD15KP15KW,
15kW,ALL
ALLELECTRICAL
ELECTRICALCHARACTERISTICS
CHARACTERISTICS@
@25
25º°CC
PLAD15KP
PLAD7.5KP 7.5kW, ALL ELECTRICAL CHARACTERISTICS @ 25º C
REVERSE
STAND-OFF
VOLTAGE
VWM
MINIMUM
BREAKDOWN
VOLTAGE
VBR
MIN @ IBR
BREAKDOWN
CURRENT
IBR
MAXIMUM
CLAMPING
VOLTAGE
@ IPP
VC
PEAK
PULSE
CURRENT
IPP
MAXIMUM
STANDBY
CURRENT
@ VWM
ID
Volts
Volts
mA
Volts
Amps
μA
PLAD7.5KP10A
PLAD7.5KP11A
10
11
11.1 - 12.3
12.2 - 13.5
5
5
17.0
18.2
471
440
15
10
PPLAD7.5KP12A
PPLAD7.5KP13A
12
13
13.3 - 14.7
14.4 - 15.9
5
5
19.9
21.5
402
372
10
10
PLAD7.5KP14A
PPLAD7.5KP15A
14
15
15.6 - 17.2
16.7 - 18.5
5
5
23.2
24.4
345
328
10
10
PLAD7.5KP16A
PLAD7.5KP17A
16
17
17.8 - 19.7
18.9 - 20.9
5
5
26.0
27.6
308
290
10
10
PLAD7.5KP18A
PLAD7.5KP20A
18
20
20.0 - 22.1
22.2 - 24.5
5
5
29.2
32.4
274
248
10
10
PLAD7.5KP22A
PLAD7.5KP24A
22
24
24.4 - 26.9
26.7 - 29.5
5
5
35.5
38.9
225
206
10
10
PLAD7.5KP26A
PPLAD7.5KP28A
26
28
28.9 - 31.9
31.1 - 34.4
5
5
42.1
45.5
190
176
10
10
PLAD7.5KP30A
PLAD7.5KP33A
30
33
33.3 - 36.8
36.7 - 40.6
5
5
48.4
53.3
166
151
10
10
PLAD7.5KP36A
PLAD7.5KP40A
36
40
40.0 - 44.2
44.4 - 49.1
5
5
58.1
64.5
137
124
10
10
PLAD7.5KP43A
PLAD7.5KP45A
43
45
47.8 - 52.8
50.0 – 55.3
5
5
69.4
72.7
115
110
10
10
PPLAD7.5KP48A
48
53.3 – 58.9
5
77.4
104
10
TYPE NUMBER
S E L E C T I O N G U I D E
TYPE NUMBER
PLAD15KP7.0A
PLAD15KP7.5A
PLAD15KP8.0A
PLAD15KP8.5A
PLAD15KP9.0A
PLAD15KP10A
PLAD15KP11A
PLAD15KP12A
PLAD15KP13A
PLAD15KP14A
PLAD15KP15A
PLAD15KP16A
PLAD15KP17A
PLAD15KP18A
PLAD15KP20A
PLAD15KP22A
PLAD15KP24A
PLAD15KP26A
PLAD15KP28A
PLAD15KP30A
PLAD15KP33A
PLAD15KP36A
PLAD15KP40A
PLAD15KP43A
PLAD15KP45A
PLAD15KP48A
PLAD15KP51A
PLAD15KP54A
PLAD15KP58A
PLAD15KP60A
PLAD15KP64A
PLAD15KP70A
PLAD15KP75A
PLAD15KP78A
PLAD15KP85A
PLAD15KP90A
PLAD15KP100A
PLAD15KP110A
PLAD15KP120A
PLAD15KP130A
PLAD15KP150A
PLAD15KP160A
PLAD15KP170A
PLAD15KP180A
PLAD15KP200A
REVERSE
STAND-OFF
VOLTAGE
VWM
MINIMUM
BREAKDOWN
VOLTAGE
VBR
MIN @ IBR
BREAKDOWN
CURRENT
IBR
MAXIMUM
CLAMPING
VOLTAGE
@ IPP
VC
PEAK
PULSE
CURRENT
IPP
Volts
Volts
mA
Volts
Amps
7.0
7.5
8.0
8.5
9.0
10
11
12
13
14
15
16
17
18
20
22
24
26
28
30
33
36
40
43
45
48
51
54
58
60
64
70
75
78
85
90
100
110
120
130
150
160
170
180
200
7.78
8.33
8.89
9.44
10.0
11.1
12.2
13.3
14.4
15.6
16.7
17.8
18.9
20.0
22.2
24.4
26.7
28.9
31.1
33.3
36.7
40.0
44.4
47.8
50.0
53.3
56.7
60.0
64.4
66.7
71.1
77.8
83.3
86.7
94.4
100
111
122
133
144
167
178
189
200
222
150
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.5
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103
113
121
126
137
146
162
177
193
209
243
259
275
291
322
1251
1164
1101
1041
975
882
822
753
696
645
618
576
543
516
462
423
384
357
330
309
282
258
234
216
207
195
183
171
159
156
147
132
123
120
108
102
93
84
78
71
62
58
55
52
47
MAXIMUM
STANDBY
CURRENT
@ VWM
ID
A
3000
750
450
150
60
45
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
PLAD
18
19
P4KE/P5KE/P6KE/1.5KE Axial Devices
PLAD Surface Mount Devices
H I G H R E L I A B I L I T Y P L A S T I C T V S
S E L E C T I O N G U I D E
H I G H R E L I A B I L I T Y P L A S T I C T V S S E L E C T I O N G U I D E
P4KE/P6KE/1.5KE
AxialProducts
Devices Group (DPG)
KE Axial Devices
from the Discrete
PLAD30KP30KW,
30kW,ALL
ALLELECTRICAL
ELECTRICALCHARACTERISTICS
CHARACTERISTICS@
@25
25º°CC
PLAD30KP
TYPE NUMBER
PLAD30KP14A
PLAD30KP15A
PLAD30KP16A
PLAD30KP17A
PLAD30KP18A
PLAD30KP20A
PLAD30KP22A
PLAD30KP24A
PLAD30KP26A
PLAD30KP28A
PLAD30KP30A
PLAD30KP33A
PLAD30KP36A
PLAD30KP40A
PLAD30KP43A
PLAD30KP45A
PLAD30KP48A
PLAD30KP51A
PLAD30KP54A
PLAD30KP58A
PLAD30KP60A
PLAD30KP64A
PLAD30KP70A
PLAD30KP75A
PLAD30KP78A
PLAD30KP85A
PLAD30KP90A
PLAD30KP100A
PLAD30KP110A
PLAD30KP120A
PLAD30KP130A
PLAD30KP150A
PLAD30KP160A
PLAD30KP170A
PLAD30KP180A
PLAD30KP200A
PLAD30KP220A
PLAD30KP260A
PLAD30KP280A
PLAD30KP300A
PLAD30KP350A
PLAD30KP400A
REVERSE
STAND-OFF
VOLTAGE
VWM
MINIMUM
BREAKDOWN
VOLTAGE
VBR
MIN @ IBR
BREAKDOWN
CURRENT
IBR
MAXIMUM
CLAMPING
VOLTAGE
@ IPP
VC
PEAK
PULSE
CURRENT
IPP
Volts
Volts
mA
Volts
Amps
14
15
16
17
18
20
22
24
26
28
30
33
36
40
43
45
48
51
54
58
60
64
70
75
78
85
90
100
110
120
130
150
160
170
180
200
220
260
280
300
350
400
15.6
16.7
17.8
18.9
20.0
22.2
24.4
26.7
28.9
31.1
33.3
36.7
40.0
44.4
47.8
50.0
53.3
56.7
60.0
64.4
66.7
71.1
77.8
83.3
86.7
94.4
100
111
122
133
144
167
178
189
200
222
245
289
311
333
389
444
150
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
24.0
25.8
27.2
28.8
30.8
34.0
36.4
39.8
43.0
46.4
48.8
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103.0
113
121
126
137
146
162
177
193
209
243
259
275
291
322
356
419
451
483
564
644
1251
1164
1101
1041
975
882
822
753
696
645
618
564
516
468
432
414
390
366
342
318
312
294
264
246
240
216
204
186
168
156
142
124
116
110
104
94
84
71
66
62
53
46
FEATURES
MAXIMUM
STANDBY
CURRENT
@ VWM
ID
•
A
3000
750
450
150
60
45
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
•
•
•
APPEARANCE
Peak Pulse Power at 10/1000µS
o P4KE series – 400W
o P5KE series – 500W
o P6KE series – 600W
o 1.5KE series – 1.5kW
Standoff voltage
o P4KE series – 5.8V to 342V
o P5KE series – 5.0V to 170V
o P6KE series – 5.8V to 171V
o 1.5KE series – 5.8V to 324V
Operational and Storage Temperature of -65°C to +150°C
Unidirectional and Bidirectional versions available
PART NOMENCLATURE
MX
P4KE
22
(C)
A
(e3)
Reliability Level
M = M Level
MA = MA Level
MX = MX Level
MXL = MXL Level
RoHS Compliance
e3 = RoHS Compliant
Blank = non-RoHS Compliant
Breakdown Voltage
Tolerance
A = 5%
Package Type
P4KE = 400W DO-41
P6KE = 600W T-18
1.5KE = 1.5kW Case 1
Uni/Bidirectional
C = Bidirectional
Blank = Unidirectional
Nominal Breakdown Voltage
See Tables below
Sample Part Number
MA1.5KE27Ae3 – MA screened 1.5KE 15kW device, 27V breakdown, uni-directional, 5% tolerance and RoHS compliant
PACKAGE DIMENSIONS
AC
PLAD
A
Cathode
Mark
B
D
C
20
DIM
A
B
C
D
P4KE (DO-41)
INCHES
MM
MIN
MAX
MIN
MAX
.03
1.00
.205
.107
.034
-
.76
25.4
5.207
2.72
.86
-
P6KE (T-18)
Rectifier
INCHES
Network
MIN
MAX
.330
.130
.038
1.00
.350
.145
.042
-
DC Line Protection
21
MIN
8.39
3.31
0.97
25.4
MM
MAX
8.89
3.68
1.06
-
1.5KE & LCE (Case 1)
MM
MIN
MAX
To
INCHES
MIN
Load MAX
.360
.190
.038
1.10
.375
.205
.042
-
9.144
4.826
.965
27.9
9.525
5.207
1.067
-
P4KE/P6KE/1.5KE
D
P4KE/P5KE/P6KE/1.5KE Axial Devices
P4KE/P5KE/P6KE/1.5KE Axial Devices
H I G H R E L I A B I L I T Y P L A S T I C T V S
S E L E C T I O N G U I D E
P5KE 500 WATT, ALL ELECTRICAL CHARACTERISTICS @250C
P4KE 400 WATT, ALL ELECTRICAL CHARACTERISTICS @250C
TYPE NUMBER
P4KE6.8A
P4KE7.5A
P4KE8.2A
P4KE9.1A
P4KE10A
P4KE11A
P4KE12A
P4KE13A
P4KE15A
P4KE16A
P4KE18A
P4KE20A
P4KE22A
P4KE24A
P4KE27A
P4KE30A
P4KE33A
P4KE36A
P4KE39A
P4KE43A
P4KE47A
P4KE51A
P4KE56A
P4KE62A
P4KE68A
P4KE75A
P4KE82A
P4KE91A
P4KE100A
P4KE110A
P4KE120A
P4KE130A
P4KE150A
P4KE160A
P4KE170A
P4KE180A
P4KE200A
P4KE220A
P4KE250A
P4KE300A
P4KE350A
P4KE400A
REVERSE
STAND-OFF
VOLTAGE
VWM
MINIMUM
BREAKDOWN
VOLTAGE
VBR
MIN @ IBR
BREAKDOWN
CURRENT
IBR
Volts
Volts
5.80
6.40
7.02
7.78
8.55
9.40
10.2
11.1
12.8
13.6
15.3
17.1
18.8
20.5
23.1
25.6
28.2
30.8
33.3
36.8
40.2
43.6
47.8
53.0
58.1
64.1
70.1
77.8
85.5
94.0
102.0
111.0
128.0
136.0
145.0
154.0
171.0
185.0
214.0
256.0
300.0
342.0
6.45
7.13
7.79
8.65
9.50
10.5
11.4
12.4
14.3
15.2
17.1
19.0
20.9
22.8
25.7
28.5
31.4
34.2
37.1
40.9
44.7
48.5
53.2
58.9
64.6
71.3
77.9
86.5
95.0
105.0
114.0
124.0
143.0
152.0
162.0
171.0
190.0
209.0
237.0
285.0
333.0
380.0
MAXIMUM
CLAMPING
VOLTAGE
@ IPP
VC
PEAK
PULSE
CURRENT
IPP
mA
Volts
Amps
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
10.5
11.3
12.1
13.4
14.5
15.6
16.7
18.2
21.2
22.5
25.2
27.7
30.6
33.2
37.5
41.4
45.7
49.9
53.9
59.3
64.8
70.1
77.0
85.0
92.0
103.0
113.0
125.0
137.0
152.0
165.0
179.0
207.0
219.0
234.0
246.0
274.0
328.0
344.0
414.0
482.0
548.0
38
35
33
30
28
26
24
22
19
18
16
14.5
13
12
11
9.5
9.0
8.0
7.5
7.0
6.2
5.7
5.2
4.7
4.4
3.9
3.5
3.2
2.9
2.6
2.4
2.2
1.95
1.8
1.7
1.6
1.5
1.0
1.0
1.0
1.0
1.0
MAXIMUM
STANDBY
CURRENT
@ VWM
ID
PART
NUMBER
A
P5KE5.0A
P5KE6.0A
P5KE6.5A
P5KE7.0A
P5KE7.5A
P5KE8.0A
P5KE8.5A
P5KE9.0A
P5KE10A
P5KE11A
P5KE12A
P5KE13A
P5KE14A
P5KE15A
P5KE16A
P5KE17A
P5KE18A
P5KE20A
P5KE22A
P5KE24A
P5KE26A
P5KE28A
P5KE30A
P5KE33A
P5KE36A
P5KE40A
P5KE43A
P5KE45A
P5KE48A
P5KE51A
P5KE54A
P5KE58A
P5KE60A
P5KE64A
P5KE70A
P5KE75A
P5KE78A
P5KE85A
P5KE90A
P5KE100A
P5KE110A
P5KE120A
P5KE130A
P5KE150A
P5KE160A
P5KE170A
500
200
100
20
5
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
P4KE/P6KE/1.5KE
22
BREAKDOWN
VOLTAGE
VBR
Min.
V
6.4
6.67
7.22
7.78
8.33
8.89
9.44
10.0
11.1
12.2
13.3
14.4
15.6
16.7
17.8
18.9
20.0
22.2
24.4
26.7
28.9
31.1
33.3
36.7
40.0
44.4
47.8
50.0
53.3
56.7
60.0
64.4
66.7
71.1
77.8
83.3
86.7
94.4
100.0
111.0
122.0
133.0
144.0
167.0
178.0
189.0
Max.
V
7.0
7.37
7.98
8.60
9.21
9.83
10.4
11.1
12.3
13.5
14.7
15.9
17.2
18.5
19.7
20.9
22.1
24.5
26.9
29.5
31.9
84.4
36.8
40.6
44.2
49.1
52.8
55.3
58.9
62.7
66.3
71.2
73.7
78.6
86.0
92.1
95.8
104.0
111.0
123.0
135.0
147.0
159.0
185.0
197.0
209.0
TEST
CURRENT
IBR
mA
10
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
RATED
STANDOFF
VOLTAGE
VWM
MAX
STANDBY
CURRENT
ID @ VWM
V
μA
5.0
6.0
6.5
7.0
7.5
8.0
8.5
9.0
10
11
12
13
14
15
16
17
18
20
22
24
26
28
30
33
36
40
43
45
48
51
54
58
60
64
70
75
78
85
90
100
110
120
130
150
160
170
600
600
400
150
50
25
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
MAX
CLAMPING
VOLTAGE
VC
@ IPP
V
9.2
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103.0
113.0
121.0
126.0
137.0
146.0
162.0
177.0
193.0
209.0
243.0
259.0
275.0
MAX PEAK
PULSE
CURRENT
IPP
MAX TEMP
COEFFICIANT
OF VBR
A
%/°C
54.3
48.5
44.7
41.7
38.8
36.7
34.7
32.5
29.4
27.4
25.1
23.2
21.5
20.6
19.2
18.1
17.2
15.4
14.1
12.8
11.9
11.0
10.3
9.4
8.6
7.8
7.2
6.9
6.5
6.1
5.7
5.3
5.2
4.9
4.4
4.1
4.0
3.6
3.4
3.1
2.8
2.0
2.4
2.1
1.9
1.8
VBR
.057
.059
.061
.065
.067
.070
.073
.076
.078
.081
.082
.084
.086
.087
.088
.090
.092
.093
.094
.096
.097
.098
.099
.100
.101
.101
.102
.102
.103
.103
.104
.104
.104
.105
.105
.105
.106
.106
.107
.107
.107
.107
.108
.108
.108
.108
NOTE 1:
Forward Voltage (VF) @ 35 A peak, 8.3 ms sine wave equal to 3.5 volts (excluding bidirectional).
NOTE 2:
For bidirectional construction, indicate a CA suffix after part number, e.g. MP5KE170CA.
Bidirectional capacitance is half that shown in Figure 4 at zero volts.
23
P4KE/P5KE/P6KE/1.5KE Axial Devices
H I G H R E L I A B I L I T Y P L A S T I C T V S
P4KE/P5KE/P6KE/1.5KE Axial Devices
S E L E C T I O N G U I D E
H I G H R E L I A B I L I T Y P L A S T I C T V S
P6KE 600 WATT, ALL ELECTRICAL CHARACTERISTICS @250C
TYPE NUMBER
P6KE6.8A
P6KE7.5A
P6KE8.2A
P6KE9.1A
P6KE10A
P6KE11A
P6KE12A
P6KE13A
P6KE15A
P6KE16A
P6KE18A
P6KE20A
P6KE22A
P6KE24A
P6KE27A
P6KE30A
P6KE33A
P6KE36A
P6KE39A
P6KE43A
P6KE47A
P6KE51A
P6KE56A
P6KE62A
P6KE68A
P6KE75A
P6KE82A
P6KE91A
P6KE100A
P6KE110A
P6KE120A
P6KE130A
P6KE150A
P6KE160A
P6KE170A
P6KE180A
P6KE200A
REVERSE
STAND-OFF
VOLTAGE
VWM
MINIMUM
BREAKDOWN
VOLTAGE
VBR
MIN @ IBR
BREAKDOWN
CURRENT
IBR
MAXIMUM
CLAMPING
VOLTAGE
@ IPP
VC
PEAK
PULSE
CURRENT
IPP
Volts
Volts
mA
Volts
Amps
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
10.5
11.3
12.1
13.4
14.5
15.6
16.7
18.2
21.2
22.5
25.2
27.7
30.6
33.2
37.5
41.4
45.7
49.9
53.9
59.3
64.8
70.1
77
85
92
103
113
125
137
152
165
179
207
219
234
246
274
57
53
50
45
41
38
36
33
28
27
24
22
20
18
16
14.4
13.2
12
11.2
10.1
9.3
8.6
7.8
7.1
6.5
5.8
5.3
4.8
4.4
3.4
3.6
3.3
2.9
2.7
2.6
2.4
2.2
5.8
6.4
7.02
7.78
8.55
9.4
10.2
11.1
12.8
13.6
15.3
17.1
18.8
20.5
23.1
25.6
28.2
30.8
33.3
36.8
40.2
43.6
47.8
53
58.1
64.1
70.1
77.8
85.5
94
102
111
128
136
145
154
171
6.45
7.13
7.79
8.65
9.5
10.5
11.4
12.4
14.3
15.2
17.1
19
20.9
22.8
25.7
28.5
31.4
34.2
37.1
40.9
44.7
48.5
53.2
58.9
64.6
71.3
77.9
86.5
95
105
114
124
143
152
161
171
190
1.5KE 1.5kW, ALL ELECTRICAL CHARACTERISTICS @250C
MAXIMUM
STANDBY
CURRENT
@ VWM
ID
TYPE NUMBER
A
1000
500
200
50
10
5
5
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1.5KE6.8A
1.5KE7.5A
1.5KE8.2A
1.5KE9.1A
1.5KE10A
1.5KE11A
1.5KE12A
1.5KE13A
1.5KE15A
1.5KE16A
1.5KE18A
1.5KE20A
1.5KE22A
1.5KE24A
1.5KE27A
1.5KE30A
1.5KE33A
1.5KE36A
1.5KE39A
1.5KE43A
1.5KE47A
1.5KE51A
1.5KE56A
1.5KE62A
1.5KE68A
1.5KE75A
1.5KE82A
1.5KE91A
1.5KE100A
1.5KE110A
1.5KE120A
1.5KE130A
1.5KE150A
1.5KE160A
1.5KE170A
1.5KE180A
1.5KE200A
1.5KE220A
1.5KE250A
1.5KE300A
1.5KE350A
1.5KE400A
REVERSE
STAND-OFF
VOLTAGE
VWM
MINIMUM
BREAKDOWN
VOLTAGE
VBR
MIN @ IBR
BREAKDOWN
CURRENT
IBR
MAXIMUM
CLAMPING
VOLTAGE
@ IPP
VC
PEAK
PULSE
CURRENT
IPP
Volts
Volts
mA
Volts
Amps
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
10.5
11.3
12.1
13.4
14.5
15.6
16.7
18.2
21.2
22.5
25.2
27.7
30.6
33.2
37.5
41.4
45.7
49.9
53.9
59.3
64.8
70.1
77.0
85.0
92.0
103.0
113.0
125.0
137.0
152.0
165.0
179.0
207.0
219.0
234.0
246.0
274.0
328.0
344.0
414.0
482.0
548.0
143.0
132.0
124.0
112.0
103.0
96.0
90.0
82.0
71.0
67.0
59.5
54.0
49.0
45.0
40.0
36.0
33.0
30.0
28.0
25.3
23.2
21.4
19.5
17.7
16.3
14.6
13.3
12.0
11.0
9.9
9.1
8.4
7.2
6.8
6.4
6.1
5.5
4.6
5.0
5.0
4.0
4.0
5.80
6.40
7.02
7.78
8.55
9.40
10.220
11.10
12.80
13.60
15.30
17.10
18.80
20.50
23.10
25.60
28.20
30.80
33.30
36.80
40.20
43.60
47.80
53.00
58.10
64.10
70.10
77.80
85.50
94.00
102.00
111.00
128.00
136.00
145.00
154.00
171.00
185.00
214.00
256.00
300.00
324.00
6.45
7.13
7.79
8.65
9.50
10.50
11.40
12.40
14.30
15.20
17.10
19.00
20.90
22.80
25.70
28.50
31.40
34.20
37.10
40.90
44.70
48.50
53.20
58.90
64.60
71.30
77.90
86.50
95.00
105.00
114.00
124.00
143.00
152.00
162.00
171.00
190.00
209.00
237.00
285.00
332.00
380.00
MAXIMUM
STANDBY
CURRENT
@ VWM
ID
A
1000
500
200
50
10
5
5
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
P4KE/P6KE/1.5KE
P4KE/P6KE/1.5KE
24
S E L E C T I O N G U I D E
25
LCE Low Capacitance Axial Devices
LCE Low Capacitance Axial Devices
H I G H R E L I A B I L I T Y P L A S T I C T V S
S E L E C T I O N G U I D E
H I G H R E L I A B I L I T Y P L A S T I C T V S S E L E C T I O N G U I D E
LCE
25º0C
LCE 1.5kW,
1.5KW,ALL
ALLELECTRICAL
ELECTRICALCHARACTERISTICS
CHARACTERISTICS@@25
LCEfrom
Low Capacitance
Axial
Devices Group (DPG)
LCE Axial Devices
the Discrete
Products
FEATURES
APPEARANCE
1.5kW Peak Pulse Power at 10/1000µS
Standoff voltage of 6.5V to 170V
Operational and Storage Temperature of -65°C to +150°C
Includes a rectifier diode element in series and the opposite direction to achieve
low capacitance performance ≤ 100pF
Two devices may be used in anti-parallel for complete AC protection if
bidirectional transient protection capability is required
TYPE
NUMBER
LCE6.5A
LCE7.0A
LCE7.5A
LCE8.0A
LCE8.5A
LCE9.0A
LCE10A
LCE11A
LCE12A
LCE13A
LCE14A
LCE15A
LCE16A
LCE17A
LCE18A
LCE20A
LCE22A
LCE24A
LCE26A
LCE28A
LCE30A
LCE33A
LCE36A
LCE40A
LCE43A
LCE45A
LCE48A
LCE51A
LCE54A
LCE58A
LCE60A
LCE64A
LCE70A
LCE75A
LCE80A
LCE90A
LCE100A
LCE110A
LCE120A
LCE130A
LCE150A
LCE160A
LCE170A
PART NOMENCLATURE
MX
LCE
22
A
(e3)
Reliability Level
M = M Level
MA = MA Level
MX = MX Level
MXL = MXL Level
RoHS Compliance
e3 = RoHS Compliant
Blank = non-RoHS Compliant
Package Type
LCE = 1500W
Breakdown Voltage Tolerance
A = 5%
Nominal Breakdown Voltage
See Tables below
Sample Part Number
MALCE48A – MA screened axial Low Capacitance 1.5kW device, 48V stand-off, unidirectional with 5% tolerance
PACKAGE DIMENSIONS
In
BREAKDOWN MAXIMUM
PEAK
MINIMUM
MAXIMUM
MAX
WORKING
REVERSE
PULSE
STANDBY
CLAMPING
CAP
INVERSE
STAND-OFF BREAKDOWN CURRENT
IBR
VOLTAGE
VOLTAGE CURRENT CURRENT @ 0 Volts BLOCKING
VOLTAGE
IPP
VBR
ID @ VWM
@IPP
f=1 MHZ VOLTAGE
VWM
VWIB @ VWIB
MIN @ IBR
VC
INVERSE
BLOCKING
LEAKAGE
CURRENT
IIB @ VWIB
PEAK
INVERSE
BLOCKING
VOLTAGE
VPIB
Volts
Volts
mA
Volts
Amps
µA
pF
Volts
µA
Volts
6.5
7.0
7.5
8.0
8.5
9.0
10
11
12
13
14
15
16
17
18
20
22
24
26
28
30
33
36
40
43
45
48
51
54
58
60
64
70
75
80
90
100
110
120
130
150
160
170
7.22
7.78
8.33
8.89
9.44
10.0
11.1
12.2
13.3
14.4
15.6
16.7
17.8
18.9
20.0
22.2
24.4
26.7
28.9
31.1
33.3
36.7
40.0
44.4
47.8
50.0
53.3
56.7
60.0
64.4
66.7
71.1
77.8
83.3
88.7
100
111
122
133
144
167
178
189
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103
113
121
129
146
162
178
193
209
243
259
275
100
100
100
100
100
97
88
82
75
70
65
61
57
54
51
46
42
39
36
33
31
28.1
25.8
23.3
21.6
20.6
19.4
18.2
17.2
16.0
15.5
14.6
13.3
12.4
11.6
10.3
9.3
8.4
7.8
7.2
6.2
5.8
5.4
1000
500
250
100
50
10
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
90
90
90
90
90
90
90
90
90
90
90
90
90
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
75
150
150
150
150
150
150
150
150
150
150
150
300
300
300
300
300
300
300
300
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
200
200
200
200
200
200
200
200
200
200
200
200
200
400
400
400
400
400
400
Out
Line
.375
.205
.042
-
9.146
4.826
.958
27.9
9.527
5.207
1.074
-
LCE
.360
.190
.038
1.100
LCE
DIM
A
B
C
D
LCE (Case 1)
INCHES
MM
MIN
MAX
MIN
MAX
Single Line
26
27
5KP/15KP Axial Devices
5KP/15KP Axial Devices
H I G H R E L I A B I L I T Y P L A S T I C T V S
S E L E C T I O N G U I D E
H I G H R E L I A B I L I T Y P L A S T I C T V S
Devices
5KP/15KP Axial Devices5KP/15KP
from theAxial
Discrete
Products Group (DPG)
FEATURES
0
5KP 5KW,
5kW, ALL ELECTRICAL CHARACTERISTICS
25º
5KP
CHARACTERISTICS @
@25
CC
APPEARANCE
Peak Pulse Power at 10/1000µS
o 5KP series – 5kW
o 15KP series – 15kW
Standoff voltage
o 5KP series – 5V to 110V
o 15KP series – 22V to 280V
Operational and Storage Temperature of -65°C to +150°C
Unidirectional and Bidirectional versions available
TYPE NUMBER
5KP5.0A
5KP6.0A
5KP6.5A
5KP7.0A
5KP7.5A
5KP8.0A
5KP8.5A
5KP9.0A
5KP10A
5KP11A
5KP12A
5KP13A
5KP14A
5KP15A
5KP16A
5KP17A
5KP18A
5KP20A
5KP22A
5KP24A
5KP26A
5KP28A
5KP30A
5KP33A
5KP36A
5KP40A
5KP43A
5KP45A
5KP48A
5KP51A
5KP54A
5KP58A
5KP60A
5KP64A
5KP70A
5KP75A
5KP78A
5KP85A
5KP90A
5KP100A
5KP110A
PART NOMENCLATURE
MX
5KP
22
(C)
A
Reliability Level
M = M Level
MA = MA Level
MX = MX Level
MXL = MXL Level
(e3)
RoHS Compliance
e3 = RoHS Compliant
Blank = non-RoHS Compliant
Breakdown Voltage Tolerance
A = 5%
Package Type
5KP = 5kW
15KP = 15kW
Uni/Bidirectional
C = Bidirectional
Blank = Unidirectional
Reverse Standoff Voltage
See Tables below
Sample Part Numbers
MA5KP36Ae3 – MA screened axial 5kW device, 36V reverse stand-off, uni-directional, 5% tolerance and RoHS compliant
MXL15KPA40CA – MXL screened axial 15kW device, 40V breakdown, bi-directional, 5% tolerance and non-RoHS compliant
PACKAGE DIMENSIONS
AC
REVERSE
STAND-OFF
VOLTAGE
VWM
MINIMUM
BREAKDOWN
VOLTAGE
VBR
MIN @ IBR
BREAKDOWN
CURRENT
IBR
MAXIMUM
CLAMPING
VOLTAGE
@ IPP
VC
PEAK PULSE
CURRENT
IPP
Volts
Volts
mA
Volts
Amps
5.0
6.0
6.5
7.0
7.5
8.0
8.5
9.0
10
11
12
13
14
15
16
17
18
20
22
24
26
28
30
33
36
40
43
45
48
51
54
58
60
64
70
75
78
85
90
100
110
6.40
6.67
7.22
7.78
8.33
8.89
9.44
10.0
11.1
12.2
13.3
14.4
15.6
16.7
17.8
18.9
20.0
22.2
24.4
26.7
28.9
31.1
33.3
36.7
40.0
44.4
47.8
50.0
53.3
56.7
60.0
64.4
66.7
71.1
77.8
83.3
86.7
94.4
100
111
122
50
50
50
50
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
9.2
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.5
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103.0
113
121
126
137
146
162
177
543
485
447
417
388
367
347
325
294
274
251
232
215
206
192
181
172
154
141
128
119
110
103
94
86
78
72
69
65
61
57
53
52
49
44
41
40
36
34
31
28
AC Supply Protection
28
MAXIMUM
STANDBY
CURRENT
@ VWM
ID
A
2000*
5000
2000
1000
250
150
50
20
15
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
5KP/15KP
5KP/15KP
DIM
A
B
C
D
5KP/15KP (Case 5A)
INCHES
MM
MIN
MAX
MIN
MAX
.365
.385
9.271
9.779
.235
.255
5.969
6.477
To
.047
.053
1.194
1.346
Load
.75
19.05
-
S E L E C T I O N G U I D E
29
5KP/15KP Axial Devices
RT100KP Axial Devices
H I G H R E L I A B I L I T Y P L A S T I C T V S
H I G H R E L I A B I L I T Y P L A S T I C T V S
S E L E C T I O N G U I D E
RT100KP
Devices
RT100KP Axial Devices from
the Axial
Discrete
Products Group (DPG)
0
15KP 15KW,
15kW, ALL ELECTRICAL CHARACTERISTICS
25º
15KP
CHARACTERISTICS @
@25
CC
TYPE NUMBER
15KP22A
15KP24A
15KP26A
15KP28A
15KP30A
15KP33A
15KP36A
15KP40A
15KP43A
15KP45A
15KP48A
15KP51A
15KP54A
15KP58A
15KP60A
15KP64A
15KP70A
15KP75A
15KP78A
15KP85A
15KP90A
15KP100A
15KP110A
15KP120A
15KP130A
15KP150A
15KP160A
15KP170A
15KP180A
15KP200A
15KP220A
15KP240A
15KP260A
15KP280A
REVERSE
STAND-OFF
VOLTAGE
VWM
MINIMUM
BREAKDOWN
VOLTAGE
VBR
MIN @ IBR
BREAKDOWN
CURRENT
IBR
MAXIMUM
CLAMPING
VOLTAGE
@ IPP
VC
PEAK PULSE
CURRENT
IPP
Volts
Volts
mA
Volts
Amps
22
24
26
28
30
33
36
40
43
45
48
51
54
58
60
64
70
75
78
85
90
100
110
120
130
150
160
170
180
200
220
240
260
280
24.4
26.7
28.9
31.1
33.3
36.7
40.0
44.4
47.8
50.0
53.3
56.7
60.0
64.4
66.7
71.7
77.8
83.3
86.7
94.4
100
111
122
133
144
167
178
189
200
222
245
267
289
311
10
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
37.1
40.7
44.0
47.5
50.7
54.8
59.7
65.8
69.7
73.0
77.7
82.8
87.5
94.0
97.3
104
114
122
126
137
146
162
178
193
209
243
259
275
291
322
356
388
419
452
404
369
341
316
296
274
251
228
215
205
193
181
171
160
154
144
132
123
119
109
103
93
84
78
72
62
58
55
52
47
42
39
36
33
S E L E C T I O N G U I D E
FEATURES
MAXIMUM
STANDBY
CURRENT
@ VWM
ID
APPEARANCE
100kW Peak Pulse Power at 6.4/69µS
Standoff voltage of 40V to 400V
Operational and Storage Temperature of -65°C to +150°C
Unidirectional and Bidirectional versions available
Designed for aircraft applications requiring high power transient protection with a
comparatively small axial-package size
A
500
150
50
25
15
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
PART NOMENCLATURE
MX
RT100KP
70
(C)
A
(e3)
RoHS Compliance
e3 = RoHS Compliant
Blank = non-RoHS Compliant
Reliability Level
M = M Level
MA = MA Level
MX = MX Level
MXL = MXL Level
Breakdown Voltage Tolerance
A = 5%
Package Type
RT100KP = 100kW
Uni/Bidirectional
C = Bidirectional
Blank = Unidirectional
Reverse Standoff Voltage
See Tables below
Sample Part Number
MXRT100KP70CAe3 – MX screened axial 100kW device, 70V stand-off, bi-directional, 5% tolerance and RoHS compliant.
PACKAGE DIMENSIONS
DIM
A
B
C
D
.365
.385
Relay
Coil
.235
.047
.75
.255
.053
-
9.271
5.969
1.194
19.05
9.779
6.477
1.346
-
RT100KP
5KP/15KP
24 V
DC
RT100KP (Case 5A)
INCHES
MM
MIN
MAX
MIN
MAX
Relay Transient Protection
30
Rev. 1.0 1/2010
31
www.microsemi.com
21
RT100KP Axial Devices
MRT130KP Transient Voltage Suppressor
H I G H R E L I A B I L I T Y P L A S T I C T V S
S E L E C T I O N G U I D E
0
RT100KP 100kW,
ALL
@ 6.4/69
µs ELECTRICAL
CC
100kW @
6.4/69
µS, ALL
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS @25
@ 25º
TYPE NUMBER
RT100KP40A
RT100KP43A
RT100KP45A
RT100KP48A
RT100KP51A
RT100KP54A
RT100KP58A
RT100KP60A
RT100KP64A
RT100KP70A
RT100KP75A
RT100KP78A
RT100KP85A
RT100KP90A
RT100KP100A
RT100KP110A
RT100KP120A
RT100KP130A
RT100KP150A
RT100KP160A
RT100KP170A
RT100KP180A
RT100KP200A
RT100KP220A
RT100KP250A
RT100KP260A
RT100KP280A
RT100KP300A
RT100KP350A
RT100KP400A
130 kW Transient Voltage Suppressor from the Discrete Products Group (DPG)
REVERSE
STAND-OFF
VOLTAGE
VWM
MINIMUM
BREAKDOWN
VOLTAGE
VBR
MIN @ IBR
BREAKDOWN
CURRENT
IBR
MAXIMUM
CLAMPING
VOLTAGE
@ IPP
VC
PEAK PULSE
CURRENT
IPP
Volts
Volts
mA
Volts
Amps
A
40
43
45
48
51
54
58
60
64
70
75
78
85
90
100
110
120
130
150
160
170
180
200
220
250
260
280
300
350
400
44.4
47.8
50.0
53.3
56.7
60.0
64.4
66.7
71.1
77.8
83.3
86.7
94.4
100
111
122
133
144
167
178
189
200
222
245
278
289
311
333
389
444
20
10
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
78.6
84.5
88.5
94.3
101
106
114
118
126
138
147
153
166
178
197
216
235
254
296
315
334
354
392
434
493
512
552
590
690
787
1273 *
1184 *
1130 *
1061 *
990 *
943 *
878
848
795
725
680
655
602
563
508
463
426
394
338
318
300
283
256
231
203
196
181
170
145
127
1500
500
150
150
50
25
15
15
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
FEATURES
MAXIMUM
STANDBY
CURRENT
@ VWM
ID
•
•
•
•
•
•
•
•
•
High reliability controlled devices with wafer fabrication and assembly
lot traceability
100 % surge tested devices
Suppresses transients up to 130 kW @ 6.4/69 µs
Fast response with less than 5ns turn-on time
Available as either low clamp with “CV” suffix or normal clamping
features with “CA” suffix
Optional upscreening available by replacing the M prefix with MA, MX or MXL.
These prefixes specify various screening and conformance inspection options based
on MIL-PRF-19500. Refer to MicroNote 129 for more details on the screening options.
Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B
RoHS Compliant devices available by adding “e3” suffix
3σ lot norm screening performed on Standby Current ID
ELECTRICAL CHARACTERISTICS @ 25oC
MICROSEMI PART
NUMBER
MRT130KP275CV
MRT130KP275CA
MRT130KP295CV
MRT130KP295CA
* The Maximum Peak Pulse Current (IPP) shown represents the performance capabilities by design. Surge test screening is only performed up to
900 Amps (test equipment limitations).
Working
Standoff
Voltage
VWM
V max
275
275
295
295
Maximum
Standby
Current
ID @ VWM
μA
5
5
5
5
Minimum
Breakdown
Voltage
VBR @ IBR
Volts
300
300
300
300
* The Maximum Peak Pulse Current (IPP) shown represents the performance capabilities by design. Surge test screening is only
performed up to 900 Amps (test equipment limitations).
RT100KP
32
33
Breakdown
Current
IBR
mA
5
5
5
5
Maximum
Clamping
Voltage
VC @ IPP (Note 1)
Volts
400
445
410
460
Peak Pulse
Current
IPP @ 6.4/69 μs
(Note 2)
Amps
292
292
282
282
MRT65KP Transient Voltage Suppressor
65 kW Transient Voltage Suppressor from the Discrete Products Group (DPG)
Power Products
Up-screening Program
FEATURES
•
•
•
•
•
•
•
•
High reliability controlled devices with wafer fabrication and assembly lot traceability
100 % surge tested devices
Suppresses transients up to 65 kW @ 6.4/69 µs
Fast response with less than 5ns turn-on time
Preferred 65kW TVS for aircraft power bus protection
Optional upscreening available by replacing the M prefix with MA, MX or MXL
These prefixes specify various screening and conformance inspection options based
on MIL-PRF-19500. Refer to MicroNote 129 for more details on the screening options.
Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B
RoHS Compliant devices available by adding “e3” suffix 3σ lot norm screening performed
on Standby Current ID
MOSFETs, IGBTs and RECTIFIERS
ELECTRICAL CHARACTERISTICS @ 25oC
Working
Standoff
Voltage
VWM
Maximum
Standby
Current
ID @ VWM
Minimum
Breakdown
Voltage
VBR @ IBR
Breakdown
Current
IBR
Maximum
Clamping Voltage
VC @ IPP (Note 1)
Peak Pulse
Current
IPP @ 6.4/69 μs
(Note 2)
V max
μA
V
mA
V
A
MRT65KP48A
48
5
53.3
5
77.7
836
MRT65KP54A
54
5
60.0
5
87.5
742
MRT65KP60A
60
5
66.7
5
97.3
668
MRT65KP75A
75
5
83.3
5
122
533
MICROSEMI PART
NUMBER
(replace A suffix with
CA for bidirectional)
Some High Reliability programs use plastic devices but require up-screening for
additional reliability. DPG has made it easier to order plastic up-screened devices
by creating a standard up-screen plastic flow—all devices for the two flows shown
below will be marked “MXL”. All plastic discrete switching parts (MOSFETs, IGBTs,
and Diodes) on the following pages can be up-screened to their standard flows by
simply adding “MXL” to the front of the part number, for example APT28M120B2
would become MXLAPT28M120B2. Due to the limited number of characters that we
can use on the actual pack, “MXL” will be used as a designator on the package
(see sample package at right) to show that it is indeed an up-screened part. If a
variation of the standard flow is required, we will use our standard SCD (Standard
Custom Device) process to comply with the customer’s need.
Screening for MOSFETs, IGBTs & Rectifiers
Process, Screen or Test Description
Product Assurance
Level Requirement
Part Prefix:
Stabilization Bake
MXL
24 hours
100% DC Electrical Test, Go/No-Go
R
Temperature Cycling
20 Cycles1
Initial Electrical Test
R
HTGB
48 hours2
Interim Electrical Test
HTRB
R
168 hours
Final Electrical Test, Go/no-go
R
R - Required and performed based on military test conditions and limits 1 – Not for ISOTOPs 2 – Not for Diodes
34
35
Insulated Gate Bipolar Transistors (IGBTs)
MOSFETs, IGBTs and Diodes
IGBTs from Microsemi Discrete Products Group (DPG)
Family of Products Available for Up-Screen
MOSFETs
MOSFETs
MOSFETs
and
and
and
FREDFETS
FREDFETS
FREDFETS
IGBTs
IGBTs
IGBTs
DIODES
DIODES
DIODES
(fast
body
diode)
(fast
body
diode)
(fast
body
diode)
MOS5,
MOS7,
MOS8
MOS5,
MOS7,
MOS8
MOS5, MOS7, MOS8
500V,
600V,
800V,
1000V,
1200V
500V,
600V,
800V,
1000V,
500V, 600V, 800V, 1000V,1200V
1200V
Some
100V,
200V,
&300V
300V
offerings
Some
100V,
200V,
&&300V
offerings
Some
100V,
200V,
offerings
Single
and
Combination
(w/diode)
devices
Single
and
Combination
(w/diode)
devices
Single
and
Combination
(w/diode)
devices
DQ
Series
DQ
Series
DQ
Series
600V,
1000V,
1200V
600V,
1000V,
1200V
600V,
1000V,
1200V
High
Speed
Diode
Series
High
HighSpeed
SpeedDiode
DiodeSeries
Series
DSeries
Series
DDSeries
200V,
300V,
400V,
600V,
1000V,
1200V
200V,
300V,
400V,
600V,
1000V,
1200V
200V, 300V, 400V, 600V,
1000V,
1200V
Medium
Speed
Diode
Series
Medium
Speed
Diode
Series
Medium Speed Diode Series
DS
Series
DS
Series
DS
Series
600V
600V
600V
High
Speed
Diode
Series
High
Speed
Diode
Series
High
Speed
Diode
Series
600V
600V
600V
Field
Stop
Series
(GN):
Frequency:
10kHz
to30kHz
30kHz
Field
10kHz
toto30kHz
FieldStop
StopSeries
Series(GN):
(GN):Frequency:
Frequency:
10kHz
Thunderbolt
Series
(GT):
Frequency:
20kHz
to
100kHz
Thunderbolt
Series
(GT):
Frequency:
20kHz
to
100kHz
Thunderbolt Series (GT): Frequency: 20kHz to 100kHz
Thunderbolt
HS
Series
(GS):
Frequency:
40kHz
to
120kHz
Thunderbolt
HS
Series
(GS):
Frequency:
40kHz
to
120kHz
Thunderbolt HS Series (GS): Frequency: 40kHz to 120kHz
Power
MOS8
Series
(GA):
Frequency:
40kHz
to110kHz
110kHz
Power
MOS8
Series
(GA):
Frequency:
40kHz
toto110kHz
Power
MOS8
Series
(GA):
Frequency:
40kHz
900V
900V
900V
Power
MOS8
Series
(GA):
Frequency:
10kHz
to60kHz
60kHz
Power
10kHz
toto60kHz
PowerMOS8
MOS8Series
Series(GA):
(GA):Frequency:
Frequency:
10kHz
1200V
1200V
1200V
Field
Stop
Series
(GN):
Frequency:
10kHz
to20kHz
20kHz
Field
Stop
Series
(GN):
Frequency:
10kHz
toto20kHz
Field Stop Series (GN): Frequency:
10kHz
Fast
Series
(GF):
Frequency:
20kHz
to
30kHz
Fast
Series
(GF):
Frequency:
20kHz
to
30kHz
Fast Series (GF): Frequency: 20kHz to 30kHz
Thunderbolt
Series
(GT):
Frequency:
25kHz
to50kHz
50kHz
Thunderbolt
Series
(GT):
Frequency:
25kHz
toto50kHz
Thunderbolt
Series
(GT):
Frequency:
25kHz
DL
Series
DL
Series
DL
Series
600V
600V
600V
Ultra
Soft
Recovery
Diode
Series
Ultra
Soft
Recovery
Diode
Series
Ultra
Soft
Recovery
Diode
Series
Temperature
Cycle**
Temperature
Cycle**
Temperature
Cycle**
HTGB
HTGB
HTGB
HTRB
HTRB
HTRB
M1051,
Cond.
M1051,
Cond.
GGG
M1051,
Cond.
cycles,
-55°C
to150°C
150°C
202020
cycles,
-55°C
toto150°C
cycles,
-55°C
M1032,
24hrs.
150°C
M1032,
24hrs.
150°C
M1032,
24hrs.
150°C
M1042,
Cond.
M1042,
Cond.
BBB
M1042,
Cond.
hrs.,
150°C
484848
hrs.,
150°C
hrs.,
150°C
SOT-227
ISOTOP
100%
, 25°C
100%
, 25°C
100%
, 25°C
TO-247
TO-247 Max
102030405060708090100
110
120
Field Stop
Thunderbolt® NPT
600V
Thunderbolt® High Speed (HS) NPT
Power MOS 8TM PT
900V
Power MOS 8TM PT
Field Stop
Fast NPT
Power MOS 7TM PT
Thunderbolt® NPT
Stabilization
Bake
Stabilization
Bake
Stabilization
Bake
DC
Electrical
Test
DC
Electrical
Test
DC
Electrical
Test
IGBT Switching Frequency Ranges (kHz, hard switched)
1200V
SSeries
Series
(Schottky)
SSSeries
(Schottky)
(Schottky)
200V
200V
200V
Low
VfDiode
Diode
Series
Low
VfVfDiode
Series
Low
Series
Standard Packages
IGBT products from Microsemi DPG provide high quality solutions for a wide range of high voltage, high power applications. The
switching frequency range spans from DC for minimal conduction loss to over 100kHz for very high power density SMPS applications.
The frequency range for each product type is shown in the graph below. Each IGBT product represents the latest in IGBT technology,
providing the best possible performance/cost combination for the targeted application. There are six product series that utilize three
different IGBT technologies: Non-Punch-Through (NPT), Punch-Through (PT) and Field Stop.
M1042,
Cond.
M1042,
Cond.
AAA
M1042,
Cond.
168
hrs.,
150°C
168
hrs.,
150°C
168
hrs.,
150°C
QA
Electrical
Test
QA
Electrical
Test
QA
Electrical
Test
DC
Electrical
Tests,
25°C
DC
Electrical
Tests,
25°C
DC
Electrical
Tests,
25°C
S/S=200/0
TO-268
TO-264
S/S=200/0
S/S=200/0
D3
TO-264 Max
QA
Visual
QA
Visual
QA
Visual
Standard
Series
Voltage
Ratings (V)
Technology
Easy to
Parallel
Thunderbolt® (GT)
600, 1200
NPT
X
X
General purpose, high speed
Thundebolt® (GS)
High Speed
600
NPT
X
X
Highest speed
FAST (GF)
1200
NPT
X
X
General purpose, medium
speed
MOS 7™ (GP)
1200
PT
Ultra-low gate charge
MOS 8™ (GA)
600, 900
PT
Highest efficiency
Field Stop (GN)
Trench Gate
600, 1200
Field Stop
X
Short Circuit Comment
SOA
X
Lowest conduction loss
TO-220
Product Options
All standard IGBT products are available as a single IGBT or as a Combi product packaged with an anti-parallel DQ series diode.
Package options include TO-220, TO-247, T-Max®, TO-264, and SOT-227. Customized products are available; contact factory for details.
LTPD=5
LTPD=5
LTPD=5
Resonant Mode Combi
Resonant Mode Combi products, which are high speed IGBTs packaged with a low VF anti-parallel DL series diode. These Combis are
intended for use in resonant mode circuits, such as the phase shifted bridge, where fast turn-off of the IGBT is needed but the recovery
speed of the anti-parallel diode is less important than its forward voltage. Resonant Mode IGBTs maximize efficiency by reducing turn-off
switching loss in the IGBT and minimizing conduction loss of the anti-parallel diode. The table below summarizes the key features and
technology for the Resonant Mode IGBT products.
SOT-227
SOT-227
SOT-227
ISOTOP
ISOTOP
ISOTOP
T0-264
T0-264
T0-264
Max
Max
Max
T0-268
T0-268
T0-268
D3
D3
D3
T0-247
T0-247
T0-247
T0-247
T0-247
T0-247
Max
Max
Max
T0-264
T0-264
T0-264
Resonant
Mode Series
Voltage
Ratings (V)
Technology
Easy to
Parallel
Thunderbolt®
600, 1200
NPT
X
X
General purpose, high speed
Thunderbolt®
High Speed
600
NPT
X
X
Highest speed
MOS 7
600
PT
Highest efficiency
T0-220
T0-220
T0-220
36
Short Circuit Comment
SOA
37
Insulated Gate Bipolar Transistors (IGBTs)
Insulated Gate Bipolar Transistors (IGBTs)
BVCESVCE(ON)IC2Recommended
Volts
Typ 25OC 100oC Maximum IC
Part Number
POWER MOS 8TM
• PT Technology
• Fast Switching
• Highest Efficiency
• Combi with High
Speed DQ Diode
SINGLE
2.0
2.0
2.0
600
2.0
2.0
2.0
2.0
2.5
2.5
900
2.5
2.5
2.5
50 kHz
28
36
44
54
68
80
102
Combi (IGBT & "DQ" FRED)
2.0
2.0
2.0
600 2.0
2.0
2.0
2.0
2.0
2.5
2.5
900
2.5
2.5
2.5
2.5
FIELD STOP
• Trench Technology
• Short Circuit
Rated
•Lowest
Conduction Loss
• Easy Paralleling
• Combi with High
Speed DQ Diode
SINGLE
50 kHz
14
17
21
29
34
50 kHz
8
10
13
19
23
TO-220
TO-247 or D3
TO-247 or D3
TO-247 or D3
TO-247 or D3
TO-247 or D
TO-247 or D3
TO-247 or D3
ISOTOP®
TO-247 or D3
ISOTOP®
T-MAX® or TO-264
TO-264
27
35
43
46
64
80
14
17
21
33
29
34
8
10
13
21
19
23
APT27GA90BD15
APT35GA90BD15
APT43GA90BD30
APT46GA90JD40
APT64GA90B2D30
APT80GA90LD40
TO-247 or D3
TO-247 or D3
TO-247 or D3
ISOTOP®
T-MAX® or TO-264
TO-264
APT20GN60BG
APT30GN60BG
APT50GN60BG
APT75GN60BG
APT150GN60J
APT100GN60B2G
APT150GN60B2G
APT200GN60B2G
APT200GN60J
TO-247 or D3
TO-247 or D3
TO-247 or D3
TO-247 or D3
ISOTOP®
T-MAX®
T-MAX®
T-MAX®
ISOTOP®
50 kHz
30 kHz
33
46
66
70
99
120
99
10 kHz
Combi (IGBT & "DQ" FRED)
20 kHz
19
13
APT25GN120BG
24
17
APT35GN120BG
32 22APT50GN120B2G
44
27
APT100GN120J
45 30 APT75GN120B2G
58 38 APT100GN120B2G
60 36 APT150GN120J
15 kHz
10 kHz
3
Part Numbers for D3
packages - replace
B” with “S” in part
number
T-MAX®[B2]
TO-247 or D3
TO-247 or D3
T-MAX®
ISOTOP®
T-MAX® or TO-264
T-MAX®
ISOTOP®
10
14
21
30
47
39
57
66
APT20GN60BDQ1G
APT30GN60BDQ2G
APT50GN60BDQ2G
APT75GN60LDQ3G
APT150GN60JDQ4
APT100GN60LDQ4G
APT150GN60LDQ4G
APT200GN60JDQ4
TO-247 or D3
TO-247 or D3
TO-247 or D3
TO-264
ISOTOP®
TO-264
TO-264
ISOTOP®
TO-264[L]
THUNDERBOLT®
HIGH SPEED
• High Speed
Switching Reduced Eoff
• Fastest Switching
• NPT Technology
264-MAXTM[L2]
Part Numbers for
TO-264 packages replace "B2" with
"L" in part number
20 kHz
14
10
APT15GN120BDQ1G
TO-247 or D3
19 13 APT25GN120B2DQ2G T-MAX®
24 17 APT35GN120L2DQ2G 264-MAX™
36
22
APT75GN120JDQ3
ISOTOP®
32 22 APT50GN120L2DQ2G 264-MAX™
44 27 APT100GN120JDQ4 ISOTOP®
60 36APT150GN120JDQ4 ISOTOP®
38
FAST
• NPT Technology
• Short Circuit Rated
• Low to Moderate Freq.
• Low Conduction Loss
• Easy Paralleling
RESONANT MODE
COMBI IGBTs
ISOTOP [J]
SOT-227
C
®
Current @ Frequency Test Conditions: Tj = 125oC, Tc = 100oC except Isotop® where Tc = 80oC, Vcc = 67% rated voltage Hard Switch
Datasheets available on www.microsemi.com
D3 PAK[S]
• NPT Technology
• Short Circuit
Rated
• Moderate to High
Frequency
• Easy Paralleling
30 kHz
24
15
37
20
64
30
93
42
123 75
135 54
190 79
158 100
22
33
46
57
66
70
99
• PT Technology
• Ultra-low Gate Charge
• Combi with High
Speed DQ Diode
THUNDERBOLT®
APT28GA60BD15
APT36GA60BD15
APT44GA60BD30
APT47GA60JD40
APT54GA60BD30
APT60GA60JD60
APT68GA60B2D40
APT80GA60LD40
15 kHz
TO-220
TO-247[B]
14
17
20
30
23
36
27
31
1.7
1.7
1.7
1200
1.7
1.7
1.7
1.7
APT27GA90K
APT35GA90B
APT43GA90B
APT64GA90B
APT80GA90B
19
21
26
39
30
48
35
40
24
15
10
37
20
14
64
30
21
93
42
30
123 75 47
135 54 39
190 79 57
230 103 75
158 100 66
1.5
1.5
1.5
600 1.5
1.5
1.5
1.5
1.5
TO-220
TO-247 or D3
TO-247 or D3
TO-247 or D3
TO-247 or D3
TO-247 or D3
T-MAX® or TO-264
28
36
44
47
54
60
68
80
25 kHz
Power MOS 7®
and IGBT
80 kHz
1.5
1.5
600
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.7
1.7
1.7
1200
1.7
1.7
1.7
1.7
BVCESVCE(ON)IC2Recommended
Volts
Typ 25oC 100oC Maximum IC
Part Number
80 kHz
19 14APT28GA60K
21
17
APT36GA60B
26
20
APT44GA60B
30
23
APT54GA60B
35
27
APT68GA60B
40
31
APT80GA60B
51 39 APT102GA60B2
25 kHz
27
35
43
64
80
Package
Style
G
All Products RoHS Compliant
E
• NPT or PT Technology
• Low VF Diode
• Ultrasoft Recovery
Diode
• Avalanche Rated
• High Speed
Switching-Reduced Eoff
20 kHz
40 kHz
SINGLE
3.3 33 19
12APT25GP120BG
3.3 46 24
15APT35GP120BG
3.3 54 29
18APT45GP120BG
1200
3.3 34 28
18APT45GP120J
3.3 91 42
24APT75GP120B2G
3.3 57 40
23APT75GP120J
20 kHz
40 kHz
Combi
(IGBT & "DQ" FRED)
3.3 20 11
7APT13GP120BDQ1G
3.3 33 19
12APT25GP120BDQ1G
1200
3.3
46
24
15
APT35GP120B2DQ2G
3.3 54 29
18APT45GP120B2DQ2G
3.3 34 28
18APT45GP120JDQ2
3.3 57 40
23APT75GP120JDQ3
SINGLE
30 kHz
60 kHz
14
10APT20GT60KRG
14
10
APT20GT60BRG
19
13
APT30GT60BRG
25
16
APT40GT60BRG
30
20
APT50GT60BRG
35
22
APT60GT60BRG
56
35APT100GT60B2RG
20 kHz
40 kHz
3.2
18
11
8
APT15GT120BRG
3.2
25
16
11
APT25GT120BRG
1200
3.2
50
27
17
APT50GT120B2RG
3.2 60 40
21APT100GT120JR
3.2 90 52
25APT150GT120JR
30 kHz
60 kHz
Combi (IGBT & "DQ" FRED)
2.0
15
11
8
APT15GT60BRDQ1G
2.0
20
14
10
APT20GT60BRDQ1G
2.0
30
19
13
APT30GT60BRDQ2G
600
2.0 48 29
18APT60GT60JRDQ3
2.0
50
30
20
APT50GT60BRDQ2G
2.0 100 37
22APT100GT60JRDQ4
20 kHz
40 kHz
3.2
18
11
8
APT15GT120BRDQ1G
3.2
25
16
11
APT25GT120BRDQ2G
1200
3.2
50
27
17
APT50GT120B2RDQ2G
3.2 42 34
19APT75GT120JRDQ3
3.2 60 40
21APT100GT120JRDQ4
SINGLE
50 kHz
80 kHz
600
2.8
30
14
9 APT30GS60KRG
2.8
50
23
16
APT50GS60BRG
50 kHz
80 kHz
Combi (IGBT & "DQ" FRED)
2.8
30
14
9
APT30GS60BRDQ2G
600
2.8
50
23
16
APT50GS60BRDQ2G
15 kHz
30 kHz
SINGLE
600
1200
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.5
2.5
2.5
2.5
2.5
20
20
30
40
50
60
100
Package
Style
T0-247
T0-247
T0-247
ISOTOP
T-MAX™
ISOTOP
TO-220[K]
T0-247
T0-247
T-MAX™
T-MAX™
ISOTOP
ISOTOP
D3 PAK[S]
TO-220
TO-247 or D3
TO-247 or D3
TO-247 or D3
TO-247 or D3
TO-247 or D3
TO-247[B]
T-MAX® or TO-264
Part Numbers for D3
TO-247 or D3
packages TO-247 or D3
replace "B" with
T-MAX® or TO-264
"S" in part number
ISOTOP®
ISOTOP®
TO-247 or D3
TO-247 or D3
TO-247 or D3
ISOTOP®
TO-247 or D3
ISOTOP®
TO-247 or D3
TO-247 or D3
T-MAX® or TO-264
ISOTOP®
ISOTOP®
T-MAX®[B2]
TO-220
TO-247 or D3
TO-247 or D3
TO-247 or D3
14
20
35
75
75
8
5APT11GF120KRG
TO-220
11
7APT20GF120KRG
TO-220
16
10
APT33GF120BRG
TO-247 or D3
27
17APT50GF120B2RG
T-MAX®
27
17APT50GF120LRG
TO-264
15 kHz
30 kHz
Combi (IGBT & "DQ" FRED)
2.5 35 16
10APT33GF120B2RDQ2GT-MAX®
1200
2.5
64
33
17
APT50GF120JRDQ3
ISOTOP®
2.5 80 42
20APT60GF120JRDQ3 ISOTOP®
50 kHz
80 kHz
Combi
(IGBT & "DL" FRED)
2.8 50 23
16APT50GS60BRDLG
TO-247
2.8 30 14
9APT30GS60BRDLG
TO-247
600
2.2
50
41
31 APT50GP60LDL
TO-264
2.2 45 28
22APT30GP60B2DL
T-MAX® or TO-264
2.2 25 17
14APT15GP60BDL
TO-247
20 kHz
40 kHz
3.2 25 16
11APT25GT120BRDL
TO-247
1200
3.2
50
28
17
APT50GT120B2RDL
T-MAX®
3.2 100 40
21APT100GT120JRDL
ISOTOP®
TO-264[L]
Part Numbers for L
packages replace "B2" with
"L" in part number
ISOTOP®[J]
SOT-227
C
G
Current @ Frequency Test Conditions: Tj = 125 C, Tc = 100 C except Isotop® where Tc = 80 C, Vcc = 67% rated voltage Hard Switch
Datasheets available on www.microsemi.com
o
o
o
39
All Products RoHS Compliant
E
NEW!
Power MOS 8TM MOSFETs / FREDFETs
NEW Power MOS 8TM MOSFETs / FREDFETs
(fast body diode)
BV(DSS)
Volts
RDS(ON)
Max
ID
MOSFET
Part #
3.80
5
APT4M120K
1200
TO-220
2.40
7
APT7F120B
TO-247 or D3
1.10
8
APT7M120B
14
APT14M120B
24
APT24M120B2
23
ISOTOP®
0.53
29
APT28M120B2
T-MAX® or TO-264
19
APT19M120J
ISOTOP®
35
APT34M120J
6
APT6M100K
2.50
33
1.80
8
TO-247 or D3
TO-247 or D3
APT17F100B
TO-247 or D3
TO-247 or D3
30
APT29F100B2
T-MAX® or TO-264
0.44
20
APT19F100J
ISOTOP®
0.38
32
APT31M100B2
35
APT34F100B2
T-MAX® or TO-264
0.38
21
APT21M100J
23
APT22F100J
ISOTOP®
0.33
37
APT37M100B2
T-MAX® or TO-264
0.33
25
APT25M100J
ISOTOP®
45
APT45M100J
42
1.35
8
0.80
13
0.53
APT7F80K
12
APT11F80B
TO-220
TO-247 or D3
TO-247 or D3
APT17F80B
TO-247 or D3
TO-247 or D3
23
25
ISOTOP®
TO-220
APT18M80B
APT22F80B
APT24M80B
0.24
0.21
7
18
19
41
APT38F80B2
T-MAX® or TO-264
47
APT44F80B2
T-MAX® or TO-264
31
APT29F80J
ISOTOP®
0.19
49
APT48M80B2
T-MAX® or TO-264
0.19
33
APT32M80J
ISOTOP®
0.10
Datasheets available on www.microsemi.com
57
60
Part Numbers for TO-264
packages - replace "B2"
with "L" in part number
TO-247 or D3
APT41M80B2
0.11
TO-264[L]
TO-247 or D3
43
0.21
T-MAX®[B2]
ISOTOP®
APT12M80B
0.43
0.39
APT41F100J
APT8M80K
0.90
0.58
40
APT14F100B
APT18M100B
1.50
Part Numbers for D3
packages - replace "B”
with “S” in part number
TO-247 or D3
0.44
0.18
800
TO-247
D3 PAK[S]
TO-247 or D3
APT14M100B
0.20
As with previous generation products, Power MOS 8™ MOSFETs and FREDFETs are available in all voltage ratings. A FREDFET is a
MOSFET with a faster recovery intrinsic body diode. This results in improved reliability in ZVS circuits due to shorter minority carrier
lifetime and increased commutation dv/dt ruggedness. If a fast recovery body diode is not needed, MOSFET versions are available.
APT9F100B
17
18
TO-220
TO-247 or D3
APT9M100B
0.78
0.70
APT7F100B
14
14
ISOTOP®
TO-220
APT8M100B
0.98
0.88
APT5F100K
9
9
TO-247[B]
ISOTOP®
7
1.60
1.40
APT32F120J
5
2.00
Body Diode Options
T-MAX® or TO-264
APT17F120J
2.80
The new Power MOS 8™ series is a result of extensive research into quiet switching. Input and reverse transfer capacitance values
as well as their ratio were set at specific values to achieve quiet switching with minimal switching loss. The Power MOS 8™ series of
devices are inherently quiet switching, stable when connected in parallel, very efficient, and lower cost than previous generations.
T-MAX® or TO-264
18
0.29
Quiet Switching
APT22F120B2
0.58
0.32
1000
TO-247 or D3
T-MAX® or TO-264
FREDFETs have a fast recovery body diode characteristic, providing high commutation dv/dt
ruggedness and high reliability in ZVS circuits.
Power factor correction
Server and telecom power systems
Solar inverters
Arc welding
Plasma cutting
Battery chargers
Medical
Semiconductor capital equipment
Induction heating
TO-247 or D3
APT26F120B2
2)
•
•
•
•
•
•
•
•
•
APT13F120B
27
0.53
Applications
TO-247 or D
0.58
MOSFET
TO-220[K]
3
14
0.70
0.63
• Avalanche energy rated
• Low gate charge
• Lower cost
TO-220
APT4F120K
1)
Features • Fast switching
• Low EMI
• Quiet switching
Package
Style
4
1.20
Power MOS 8™ is Microsemi's latest family of high speed, high voltage (500-1200V)
N-channel switch-mode power transistors with lower EMI characteristics and lower cost
compared to previous generation devices. These new MOSFETs /FREDFETs have been
optimized for both hard and soft switching in high frequency, high voltage applications rated
above 500W. There are 2 product types in the Power MOS 8™ MOSFET family:
FREDFET
Part #
4.20
2.10
TM
ID
APT53F80J
APT58M80J
ISOTOP®
ISOTOP®
41
ISOTOP®[J]
SOT-227
(ISOLATED BASE)
All Products RoHS Compliant
Ultrafast, Low Gate Charge MOSFETs
Power MOS 8TM MOSFETs / FREDFETs
BV(DSS)
Volts
600
500
RDS(ON)
Max
ID
MOSFET
Part #
ID
FREDFET
Part #
Package
0.62
12
APT12F60K
TO-220
0.43
16
APT15F60B
TO-247 or D3
0.37
19
APT18F60B
TO-247 or D3
0.29
24
APT23F60B
TO-247 or D3
0.22
30
APT28F60B
TO-247 or D3
0.19
36
APT34M60B
36
APT34F60B
TO-247 or D3
0.15
45
APT43M60B2
45
APT43F60B2
T-MAX® or TO-264
0.15
31
APT30M60J
31
APT30F60J
ISOTOP®
0.11
60
APT56M60B2
60
APT56F60B2
T-MAX® or TO-264
0.11
42
APT39M60J
42
APT39F60J
ISOTOP®
0.09
70
APT66M60B2
70
APT66F60B2
T-MAX® or TO-264
0.09
49
APT47M60J
49
APT47F60J
ISOTOP®
0.055
84
APT80M60J
84
APT80F60J
ISOTOP®
0.39
15
APT15F50K
TO-220[K] or TO-220[KF]*
0.30
20
APT20F50B
TO-247 or D3
0.24
24
APT24F50B
TO-247 or D3
0.19
30
APT30F50B
TO-247 or D
0.15
37
APT37F50B
TO-247 or D3
0.13
43
APT42F50B
TO-247 or D3
FOR 250 kHz - 2 MHz SWITCHING APPLICATIONS
TO-220[K] or TO-220[KF]*
The Ultrafast, Low Gate Charge MOSFET family combines the
lowest gate charge available in the industry with Microsemi’s
proprietary self-aligned aluminum metal gate structure. The result is a MOSFET capable of extremely fast switching speeds
and very low switching losses. The metal gate structure and the
layout of these chips provide an internal series gate resistance
(EGR) an order of magnitude lower than competitive devices
built with a polysilicon gate.
D3 PAK[S]
Part Numbers for D3 packages
- replace "B" with "S" in part
number
BV(DSS)
Volts
•
•
•
•
Class D amplifiers up to 2 MHz
High voltage pulsed DC
AM transmitters
Plasma deposition/etch
BENEFITS:
l
Series Gate Resistance (Rg) <0.1 ohm
l
Fast switching, uniform signal propagation
l
Tr and Tf times of <10ns
l
Pulse power applications
l
Industry's Lowest Gate Charge
l
Fast switching, reduced gate drive power
RDS(ON)
Max
ID
MOSFET Part #
FREDFET Part #
4.700
3.5
APT1204R7KFLLG
T0-220
4.700
3.5
APT1204R7BFLLG
T0-247
APT1201R4BFLLG
Package
Style
1.400
9
0.670
18
APT12067B2LLG
T-MAX®
T0-247
56
APT56M50B2
56
APT56F50B2
T-MAX® or TO-264
0.10
38
APT38M50J
38
APT38F50J
ISOTOP®
0.670
17
APT12067JLL
ISOTOP®
0.075
75
APT75M50B2
75
APT75F50B2
T-MAX® or TO-264
0.570
22
APT12057B2LLG
T-MAX®
0.075
51
APT51M50J
51
APT51F50J
ISOTOP®
0.570
19
APT12057JLL
ISOTOP®
0.062
84
APT84M50B2
84
APT84F50B2
T-MAX® or TO-264
0.310
30
APT12031JLL
ISOTOP®
0.062
58
APT58M50J
58
APT58F50J
ISOTOP®
0.036
103
APT100M50J
103
APT100F50J
ISOTOP®
1200
T-MAX®[B2]
Low Voltage Power MOS V® MOSFETs / FREDFETs
200
0.10
* Available on APT15F50K
300
Typical Applications:
FEATURES:
TO-247[B]
3
These devices are ideally suited for high frequency
and pulsed high voltage applications.
1000
0.085
40
APT30M85BVRG
40
APT30M85BVFRG
TO-247 or D3
0.070
48
APT30M70BVRG
48
APT30M70BVFRG
TO-247 or D3
0.040
70
APT30M40JVRG
70
APT30M40JVFRG
ISOTOP®
0.019
130
APT30M19JVR
130
APT30M19JVFR
ISOTOP®
0.045
56
APT20M45BVRG
56
APT20M45BVFRG
TO-247 or D
0.038
67
APT20M38BVRG
37
APT20M38BVFRG
TO-247 or D3
0.022
100
APT20M22B2VRG
100
APT20M22B2VFRG
T-MAX® or TO-264
0.011
175
APT20M11JVR
175
APT20M11JVFR
ISOTOP®
TO-264[L]
3
Part Numbers for TO-264
packages - replace "B2" with
"L" in part number
800
500
ISOTOP®[J]
SOT-227
(ISOLATED BASE)
0.900
12
APT10090BLLG
T0-247
0.780
14
APT10078BLLG
T0-247
0.450
23
APT10045B2LLG
T-MAX® or TO-264
0.450
21
APT10045JLL
ISOTOP®
0.350
28
APT10035B2LL
T-MAX®
0.350
25
APT10035JLL
ISOTOP®
0.260
38
APT10026L2FLLG
42
All Products RoHS Compliant
TO-247[B]
TO-264 MAX
0.260
30
APT10026JLL
APT10026JFLL
ISOTOP®
0.210
37
APT10021JLL
APT10021JFLL
ISOTOP®
0.140
52
APT8014L2LLLG
APT8014L2FLLG
APT8011JFLL
TO-264 MAX
0.110
51
APT8011JLL
0.200
38
APT8020B2LL
T-MAX®
0.200
33
APT8020JLL
ISOTOP®
T-MAX™ or T0-264
0.140
35
APT5014BLLG
0.100
46
APT5010B2LLG
APT5010B2FLLG
T-MAX® or TO-264
0.065
67
APT50M65B2LLG
APT50M65B2FLLG
T-MAX® or TO-264
ISOTOP®[J]
SOT-227
(ISOLATED BASE)
TO-247
0.065
58
APT50M65JLLG
APT50M65JFLLG
ISOTOP®
0.075
51
APT50M75JLL
APT50M75JFLL
ISOTOP®
0.075
57
APT50M75B2LLG
T-MAX® or TO-264
0.050
71
APT50M50JLL
ISOTOP®
0.038
88
APT50M38JLL
ISOTOP®
Datasheets available on www.microsemi.com
Datasheets available on www.microsemi.com
T-MAX®[B2]
All Products RoHS Compliant
43
Ultra Fast Recovery Diodes
COOLMOS MOSFETs
TM
BVDSSRDS(ON)ID(Cont)
Volts
Ohms
Amps
Part Number
C3 TECHNOLOGY
Package
Style
900 0.120 36APT36N90BC3G
TO-247
0.450 11APT11N80KC3G
TO-220
0.450 11APT11N80BC3G
800
0.145
34
APT34N80B2C3G
TO-247
0.145 34APT34N80LC3G
TO-264
TO-220[K]
D3 PAK[S]
TO-268
T-MAX® or TO-264
650
0.035
94
APT94N65B2C3G
T-MAX® or TO-264
0.070
47
APT47N65BC3G
TO-247 or D3
0.070
47
APT47N60BC3G
TO-247 or D3
600
0.035
77
APT77N60JC3
ISOTOP®
0.042 94APT94N60L2C3G
TO-247[B]
264-MAX™
TO-247
TO-247
0.045 60APT60N60BCSG
NEW!
C6 TECHNOLOGY
0.041
77
APT77N60BC6
TO-247 or D3
0.070
53
APT53N60BC6
TO-247 or D3
600 0.099
38
APT38N60BC6 TO-247 or D3
0.125
30
APT30N60KC6
TO-220
0.125
30
APT30N60BC6
TO-247 or D3
0.035
106 APT106N60B2C6
T-MAX™ or T0-264
0.041
85
APT97N65B2C6
T-MAX™ or T0-264
650
0.021140
APT140N65JC6
TO-264[L]
Series
Voltage
Ratings
Features
Applications
Comment
DL
600
Low VF
Ultra-soft recovery
Avalanche Rated
Output rectifier
Resonant circuits
Ultra-soft recovery minimizes or
eliminates snubber
D
200, 300, 400,
600, 1000, 1200
Medium VF
Medium Speed
DQ
600, 1000, 1200
High speed
Avalanche Rated
DS
600
Very high speed
Schottky
200
Low VF
Avalanche rated
T-MAX®[B2]
COOLMOS FREDFETS
0.083 40APT47N60BCFG
600
SERVER SERIES
Microsemi DPG offers five series of discrete diode products: a new DL series low VF ultra-soft recovery, the medium speed medium VF
D series, the high speed DQ series, the very high speed DS series, and the silicon Schottky S series. These series of diodes are designed
to provide high quality solutions to a wide range of high voltage, high power application requirements, ranging from fast recovery for
continuous conduction mode power factor correction to low conduction loss for output rectification. Distinguishing features, technology
used, and applications for each product family are summarized in the table below.
264-MAX™ [L2]
ISOTOP®[J]
SOT-227
(ISOLATED BASE)
Freewheeling Diode
Output rectifier
DC-DC converter
PFC
Freewheeling Diode
DC-DC converter
High frequency PFC
Output rectifier
Freewheeling Diode
DC-DC converter
ISOTOP
Stepped epi improves softness
Proprietary platinum process
Proprietary platinum process
The graph below shows the relative recovery speed and forward voltage positions of 600V DL, D, DQ and DS series diodes.
“COOLMOS” comprise a new family of transistors developed by Infineon Technologies AG.
“COOLMOS” is a trademark of Infineon Technologies AG”
Linear MOSFETs
What is a Linear MOSFET?
A MOSFET specifically designed to be more robust than a standard MOSFET when
operated with both high voltage and high current near DC conditions (>100msecs).
The Problem with SMPS MOSFETs
MOSFETs optimized for high frequency SMPS applications have poor high voltage DC
SOA. Most SMPS type MOSFETs over-state SOA capability at high voltage on the data sheets.
Above ~30V and DC conditions, SOA drops faster than is indicated by PD limited operation.
For pulsed loads (t<10ms) there is generally no problem using a standard MOSFET.
Technology Innovation
Introduced in 1999, Microsemi modified its proprietary patented self-aligned metal gate
MOSFET technology for enhanced performance in high voltage, linear applications. These Linear
MOSFETs typically provide 1.5-2.0 times the DC SOA capability at high voltage compared to
other MOSFET technologies optimized for switching applications.
BVDSSRDS(ON)ID(Cont) SOA
Volts
Ohms
Amps
Watts
Part Number
10000.600 18
325 APL1001J
600
0.125
0.125
49
43
325
325
APL602B2G
APL602J
500
0.090
0.090
58
52
325
325
APL502B2G
APL502J
Designers will need Linear MOSFETs when…
• High Current & > 200V >100msec
• Used as a variable power resistor
• Soft start application (limit surge currents)
• Linear amplifier circuit
Typical Applications…
• Active loads above 200 volts such as DC dynamic
loads for testing power supplies, batteries, fuel cells, etc.
• High voltage, high current constant current sources.
Package Style
ISOTOP®[J]
SOT-227
(ISOLATED
BASE)
T-MAX®[B2]
TO-264[L]
Part Numbers for TO-264 packages - replace ”B2” with “L” in part number
Datasheets available on www.microsemi.com
Proprietary platinum process
44
All Products RoHS Compliant
45
Ultra Fast Recovery Diodes
Ultra Fast Recovery Diodes
IF (avg) Volts
Amps
VF (volts)tRR(ns)
Typ 25OC Typ 25OC
15 2.8
SINGLE
15 2.8
152.0
152.0
30 2.8
1200
30 2.8
302.0
40 2.8
60 2.8
602.0
75 2.8
15 2.5
15 2.5
151.9
30 2.5
1000
30 2.5
301.9
40 2.5
60 2.5
601.9
75 2.5
8 2.0
15 2.0
15 2.0
151.6
151.6
30 2.0
30 2.0
600 301.6
301.25
40 2.0
60 2.0
601.6
75 2.0
751.25
1001.25
1501.25
301.3
400
601.3
301.1
200
30 0.83
601.1
60 0.83
100 0.89
QRR (nC)Diode
Typ 125OC Series
Part Number
at IF = IF (avg)
Package
Style
IF (avg) 21 960DQAPT15DQ120BG
TO-247
21 960DQAPT15DQ120KG
TO-220
32 1300DAPT15D120BG
TO-247
32 1300DAPT15D120KG
TO-220
TO-220[K]
24 1800DQAPT30DQ120BG
TO-247
24 1800DQAPT30DQ120KG
TO-220
31 3450DAPT30D120BG
TO-247
26 2200DQAPT40DQ120BG
TO-247
30 2800DQAPT60DQ120BG
TO-247
38 4000DAPT60D120BG
TO-247
32 3340DQAPT75DQ120BG
TO-247
20 810DQAPT15DQ100BG
TO-247
20 810DQAPT15DQ100KG
TO-220
D3 PAK[S]
28 1550DAPT15D100KG
TO-220
TO-268
22 1250DQAPT30DQ100BG
TO-247
22 1250DQAPT30DQ100KG
TO-247
29 2350DAPT30D100BG
TO-247
24 1430DQAPT40DQ100BG
TO-247
29 2325DQAPT60DQ100BG
TO-247
34 3600DAPT60D100BG
TO-247
33 2660DQAPT75DQ100BG
TO-247
14 160DQAPT8DQ60KG
TO-220
16 250DQAPT15DQ60BG
TO-247
16 250DQAPT15DQ60KG
TO-220
21 520DAPT15D60BG
TO-247
21 520DAPT15D60KG
TO-220
19 400DQAPT30DQ60BG
TO-247
19 400DQAPT30DQ60KG
TO-220
TO-247[B]
23 700DAPT30D60BG
TO-247
35 3800DLAPT30DL60BG
TO-247
22 480DQAPT40DQ60BG
TO-247
26 640DQAPT60DQ60BG
TO-247
40 920DAPT60D60BG
TO-247
29 650DQAPT75DQ60BG
TO-247
42 3800DLAPT75DL60BG
TO-247
45 3800DLAPT100DL60BG
TO-247
53 3800DLAPT150DL60B2G T-MAX®
22 360DAPT30D40BG
TO-247
30 540DAPT60D40BG
TO-247
21 150DAPT30D20BG
TO-247
25
448SchottkyAPT30S20BG
TO-247
30 250DAPT60D20BG
TO-247
35
490SchottkyAPT60S20BG
TO-247
T-MAX®[B2]
40
690SchottkyAPT100S20BG
TO-247
TANDEM, DS DIODES FOR PFC BOOST APPLICATIONS
600
15 3.2
13
85DSAPT15DS60BG
TO-247
30 3.2
17 180DSAPT30DS60BG
TO-247
Part Numbers for D3
packages - replace ”B” with “S” in
part number
(2, 300V Diodes Connected In Series)
Volts
Amps
VF (volts)tRR(ns)
Typ 25OC Typ 25OC
QRR (nC)Diode
Typ 125OC Series
Part Number
Package
Style
at IF = IF (avg)
2x27
DUAL
2x30
2x53
1200
2x60
2x93
2x100
2.0
2.6
2.0
2.5
2.0
2.4
31
25
38
30
47
45
3450 DAPT2X30D120J
1800 DQAPT2X30DQ120J
4000 DAPT2X60D120J
2890 DQ APT2X60DQ120J
5350 DAPT2X100D120J
5240 DQAPT2X100DQ120J
1000
2x28
2x55
2x60
2x95
2x100
1.9
1.9
2.2
1.9
2.1
29
34
30
43
45
2350 DAPT2X30D100J
3600 DAPT2X60D100J
2350 DQ APT2X60DQ100J
4050 DAPT2X100D100J
3645 DQAPT2X100DQ100J
600
2x30 1.8
2x30 1.6
2x60 1.7
2x60 1.6
2x100 1.6
2x100 1.6
2x150 1.25
20
23
27
40
30
34
53
400 DQAPT2X30DQ60J
700 DAPT2X30D60J
650 DQAPT2X60DQ60J
920 DAPT2X60D60J
980 DQAPT2X100DQ60J
1450 DAPT2X100D60J
3800 DLAPT2X150DL60J
400
300
2x30
2x60
2x100
2x100
22
30
37
40
360 DAPT2X30D40J
540 DAPT2X60D40J
1050 DAPT2X100D40J
3550 DLAPT2X101DL40J++
2x100 1.2
36 650 DAPT2X101D30J
200
2x30 0.80
2x60 0.83
2x100 1.1
2x100 0.89
25
35
39
40
1200
1000
600
400
300
200
2x30
1.3
1.3
1.3
1.0
2.8
2x15
2.5
2x15
1.9
2x30
1.9
2x30
1.9
2x60
2.5
2x60
1.9
2x15 1.6
2x15
2.0
2x15
1.6
2x30
2.0
2x30
2.0
2x30
1.6
2x30
1.6
2x30
1.6
2x30
1.25
2x40
2.0
2x60
2.0
2x60
1.6
2x30
1.3
2x60
1.3
2x30
1.2
2x30
1.1
2x30
1.1
2x30
0.80
2x60 0.83
2x100 0.89
ISOTOP®
Part Numbers for Parallel
Configuration replace 30, 60,
or 100 with 31, 61, or 101.
Except Schottky
448 SchottkyAPT2X31S20J
490 SchottkyAPT2X61S20J
840 DAPT2X100D20J
690 SchottkyAPT2X101S20J
DQ
APT30DQ120BCTG
Example: 2X30D120J
becomes 2X31D120J
26
2100
20
28
29
30
29
35
21
15
20
22
19
23
25
25
35
22
26
30
22
30
25
21
21
25
35
40
810
DQ
APT15DQ100BCTG
TO-247 [BCT]
1550
D
APT15D100BCTG
TO-247 [BHB]
2360
D
APT30D100BCTG
TO-247 [BHB]
2350
D
APT30D100BHBG
TO-247 [BCA]
2325
DQ
APT60DQ100LCTG
TO-264 [LCT]
3600
D
APT60D100LCTG
TO-264 [LCT]
520 DAPT15D60BCTGT0-247
250
DQ
APT15DQ60BCTG
TO-247 [BCT]
520
D
APT15D60BCAG
TO-247 [BCA]
480
DQ
APT30DQ60BHBG
TO-247 [BHB]
400
DQ
APT30DQ60BCTG
TO-247 [BCT]
700
D
APT30D60BCTG
TO-247 [BCT]
700
D
APT30D60BHBG
TO-247 [BHB]
700
D
APT30D60BCAG
TO-247 [BCA]
3800
DL
APT30DL60BCTG
TO-247 [BCT]
480
DQ
APT40DQ60BCTG
TO-247 [BCT]
640
DQ
APT60DQ60BCTG
TO-247 [BCT]
920
D
APT60D60LCTG
TO-264 [LCT]
360
D
APT30D40BCTG
TO-247 [BCT]
540
D
APT60D40LCTG
TO-264 [LCT]
1300
D
APT30D30BCTG
TO-247 [BCT]
150
D
APT30D20BCTG
TO-247 [KCT]
150
D
APT30D20BCAG
TO-247 [BCA]
448
Schottky
APT30S20BCTG
TO-247 [BCT]
490 SchottkyAPT60S20B2CTG
T-MAX® [B2CT]
690 SchottkyAPT100S20LCTG
TO-264[LCT]
TO-247 [BCT]
TO-247[B]
Datasheets available on www.microsemi.com
46
All Products RoHS Compliant
*Current ratings per leg
++ Parallel Form Only
47
ISOTOP®[J] SOT-227
Antiparallel
Configuration
(ISOLATED BASE)
Datasheets available on www.microsemi.com
TO-220[KCT]
*Common Cathode
TO-247[BCA]
*Common Anode
TO-247[BCT]
*Common Cathode
TO-247[BHB]
*Half Bridge
T-MAX® [B2CT]
*Common Cathode
TO-264[LCT]
*Common Cathode
All Products RoHS Compliant
• 100kW Peak Pulse Power at 6.4/69µS
M = M Level
e3 =construction
RoHS Compliant
• Unidirectional and Bidirectional
available
Sample Part Number
• screened
Standoff
40V
toWing,
400V
MA = MA LevelMXLSMLG36CA – MXL
Blank
= non-RoHS Compliant
surfacevoltage
mount 3kWof
device,
Gull
36V stand-off, bi-directional, 5% tolerance and non-RoHS
compliant.
•
Designed
for
aircraft
applications
requiring
high
power transient
MX = MX Level
• Operational and Storage Temperature of -65°C to +150°C
Breakdown
to web
page for
additional
package outline drawings
comparativelyRefer
small
axial-package
size Voltage
MXL = MXL Level
Tolerance
• Unidirectional and Bidirectional construction available
= 5%
• Designed for aircraft applications requiring high power transientAprotection
with a
Package Type
Blank = 10%
P4KE = 400W DO-41
comparatively small
axial-package
size
PACKAGE
DIMENSIONS
P6KE = 600W T-18
Uni/Bidirectional
SMB/SMC/SML
SMB PACKAGE DIMENSIONS INCINCHES
1.5KE = 1.5kW Case 1
= Bidirectional
(DO-214AA/DO-215AA)
J BEND
GULL WING
Blank = Unidirectional
protection with a
Package Outline Drawings
Breakdown Voltage
See Tables below
MIN
MAX
A
.077
.083
MIN
MAX
1.95
2.10
B
C
D
E
F
.160
.130 .205
.077
.235
.180
.155 .220
.104
.255
DIMENSIONS IN MILLIMETERS
4.06
3.30 5.21
1.95
5.97
4.57
3.94 5.59
2.65
6.48
K
.015
.030
L
.030
.060
.381
.762
.760
1.520
MX RT100KP
PART NOMENCLATURE
70
(C)
P4KE,
A
•
•
•
Cathode
Mark
B
D
B
C
D
.107
See Tables below
.03
.034
.76
1.00
25.4
MX
C
mini-PLAD
2.72
.130
-
1.00
.145
3.31
22
(e3)
RoHS Compliance
e3 = RoHS Compliant
Blank = non-RoHS Compliant
TO-220 2-Lead
RoHS Compliance
e3 = RoHS Compliant
Blank = non-RoHS Compliant
TO-220 3-Lead
C a th o d e
Reverse Stand-Off Voltage
Tolerance
A = 5%
Reverse Stand-Off Voltage
Tolerance
A = 5%
Uni/Bidirectional
C = Bidirectional
Blank = Unidirectional
1.5KE & LCE (Case 1)
4
INCHES
MMUni/Bidirectional
MIN
MAX
MIN
CMAX
= Bidirectional
Blank = Unidirectional
.360
.375
9.144
9.525
.190
.205
4.826
5.207
.038
.042
.965
1.067
1.10
27.9
-
C a th o d e
A node
3.68
1.06
25.4
TO-247 3-Lead
Sample Part Number
(C)MXRT100KP70CAe3
A
(e3) – MX screened axial 100kW device, 70V stand-off, bi-directional, 5% tolerance and RoHS compliant.
.86 NOMENCLATURE
.038
.042
0.97
PART
PLAD15KP
Revised
8/29/97
Revised
4/18/95
P4KE/P6KE/1.5KE
D
o PLAD15KP – 7V to 200V
Package
Type to 400V
o PLAD30KP
– 14V
P4KE
P6KE (T-18)
= (DO-41)
100kW
Operational andRT100KP
Storage
Temperature
of -65°C
to +150°C
www.microsemi.com
Breakdown
INCHES
MM
INCHES Voltage
MM
Unidirectional and Bidirectional construction available See Tables below
MIN
MAX
MIN
MAX
MIN
MAX
MIN
MAX
DIM
Replaces
high power through-hole 15KP and 30KP devices for surface mount
A
.205
5.207
.330
.350
8.39
8.89
applications Breakdown Voltage
A
SMB/SMC/SML
SMC/SML PACKAGE DIMENSIONS IN INCHES
Sample Part Number
(DO-214AB/(DO-215AB)
MX
RT100KP
MA1.5KE27Ae3 – MA screened 1.5KEPLAD
15kW device,
27V
breakdown,
uni-directional,
5%
and
compliant
A Devices
B
C70tolerance
D (C)
E RoHSFA
K (e3) L
Surface
Mount
MIN
.115
.260
.220
.305
.077
.380
.025
.030
Reliability Level
MAX
M = M.121
Level .280 .245 .320 .110 .400 .040 .060
FEATURES
APPEARANCE
MA = MA LevelDIMENSIONS IN MILLIMETERS
MIN
2.92 Level
6.60
5.59 7.75
1.95
9.65 0.635
.760
MX = MX
Reliability Level
MAX
MXL =3.07
MXL 7.11
Level 6.22 8.13 2.80 10.16 1.016 1.520
• Peak Pulse Power
M =atM10/1000µS
Level
o PLAD15KP
series
– 15kW
MA = MA
Level
Package Type
Level
series
– 30kWPACKAGE DIMENSIONS
P6KE, 1.5KEo & PLAD30KP
LCE MX = MX
RT100KP = 100kW
MXL = MXL Level
• Standoff voltage
TO-220 [KF]
D3 Pak
or TO-268
PART NOMENCLATURE
H I G H R E L I A B I L I T Y P L A S T I C T V S S E L E C T I O N G U I D E
Refer to web page for additional package outline drawings
Package Outline Drawings
TO-247 2-Lead
Sample Part Number
RoHS Compliance
MXRT100KP70CAe3 – MX screened axial 100kW device, 70V stand-off,
bi-directional,
e3 = RoHS
Compliant 5% tolerance and RoHS compliant.
Reliability Level
M = M Level
MA = MA Level
MX = MX Level
MXL = MXL Level
PACKAGE DIMENSIONS
= non-RoHS
5KP, 15KP and RT100KPBlank
Case
5A Compliant
PACKAGE DIMENSIONS
Breakdown Voltage
Package Type
PLAD15KP = 15kW
PLAD30KP = 30kW
Tolerance
A = 5%
D
www.microsemi.com
Reverse Stand-Off Voltage
See Tables below
DIM
Uni/Bidirectional
RT100KP (Case 5A) A
C = Bidirectional
MM B
Blank =INCHES
Unidirectional
D
Cathode
Mark
B
Cathode
Mark
MIN
MAX
.365
.235
.047
.75
.385
.255
.053
-
D
Sample Part Number
MXPLAD15KP9.0Ae3 – MX screened PLAD 15kW device, 9V reverse stand-off, uni-directional, 5% tolerance and RoHS
B
compliant
CMAX
D
9.779
6.477
1.346
-
.385
.255
.053
-
C
D
PACKAGE DIMENSIONS and PAD LAYOUT
PLAD
MIN
9.271
5.969
1.194
19.05
.365
.235
.047
.75
9.271
5.969
1.194
19.05
9.779
6.477
1.346 ®
T-MAX
-
RT100KP
A
DIM
A
B
C
D
RT100KP (Case 5A)
INCHES
MM
MIN
MAX
MIN
MAX
RT100KP
A
12
TO-264
INCHES [mm]
C
www.microsemi.com
Rev. 1.0 1/2010
264 MAX™
21
www.microsemi.com
Rev. 1.0 1/2010
21
ISOTOP® or SOT-227
PLAD
48
www.microsemi.com
9
49
ISOTOP® is a registered trademark of SGS Thomson
Blank page for your notes
50
Blank page for your notes
51
Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for any particular purpose, nor does Microsemi assume
any liability whatsoever arising out of the application or use of any product or circuit. The products sold hereunder and any other products sold by Microsemi have been subject to limited testing and
should not be used in conjunction with mission-critical equipment or applications. Any performance specifications are believed to be reliable but are not verified, and Buyer must conduct and complete
all performance and other testing of the products, alone and together with, or installed in, any end-products. Buyer shall not rely on any data and performance specifications or parameters provided by
Microsemi. It is the Buyer’s responsibility to independently determine suitability of any products and to test and verify the same. The information provided by Microsemi hereunder is provided “as
is, where is” and with all faults, and the entire risk associated with such information is entirely with the Buyer. Microsemi does not grant, explicitly or implicitly, to any party any patent rights, licenses,
or any other IP rights, whether with regard to such information itself or anything described by such information. Information provided in this document is proprietary to Microsemi, and Microsemi
reserves the right to make any changes to the information in this document or to any products and services at any time without notice.
Microsemi Corporate Headquarters
One Enterprise, Aliso Viejo, CA 92656 USA
Within the USA: +1 (800) 713-4113
Outside the USA: +1 (949) 380-6100
Sales: +1 (949) 380-6136
Fax: +1 (949) 215-4996
email: [email protected]
www.microsemi.com
Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions
for communications, defense & security, aerospace and industrial markets. Products include high-performance and
radiation-hardened analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products;
timing and synchronization devices and precise time solutions, setting the world’s standard for time; voice processing
devices; RF solutions; discrete components; security technologies and scalable anti-tamper products; Power-overEthernet ICs and midspans; as well as custom design capabilities and services. Microsemi is headquartered in Aliso
Viejo, Calif., and has approximately 3,400 employees globally. Learn more at www.microsemi.com.
©2015 Microsemi Corporation. All rights reserved. Microsemi and the Microsemi logo are trademarks of Microsemi Corporation. All other trademarks and
service marks are the property of their respective owners.
MS4-017-14/10-27
Similar pages