High Reliability Integrated Circuits Brochure ( 1.74 MB )

Power Matters
High Reliability Integrated Circuits
Linear Circuits
Power Supply Circuits
Class-B QML-Qualified
DSCC Certified
Introduction
Microsemi Corporation has long been a leading supplier of high reliability space and
military discrete semiconductor components and modules. The Microsemi Analog
Mixed Signal Group, AMSG supplies the Class B Integrated Circuit products and is
certified by the Defense supply Center Columbus (DSCC) and has been placed on the
Qualified Manufacturer’s List (QML). Class B QML devices are supplied in
conformance with the following Military Specifications:
•
•
•
•
WWW . Microsemi .C OM
Introduction
MIL-M-38510 slash sheets (JAN)
Standard Microcircuit Drawings (SMD)
MIL-STD-883, paragraph 1.2.1 compliant devices (/883B)
Class S wafer processing, assembly and screening is performed at the MSCAMSG facility in Garden Grove, CA. in accordance with MIL-STD-883, Method
5004, Table 1. Class S processing is specified and facilitated by individual
customer requirements through Source Control Drawings (SCD).
As an option where appropriate, Microsemi also offers a broad range of commercial and
industrial grade integrated circuits that include DC-DC controllers and voltage regulators,
low drop-out linear voltage regulators, light sensors, LED drivers, CCFL Backlight
inverter modules and integrated circuit controllers.
Certifications for AMSG Process and Products
•
•
ISO 9001:2000
MIL-PRF-38535QML
HIGH REL PRODUCTS
2
2
Product
Product Selection
Selection Guide
Guide
Power Supply Circuits, continued
Interface
SG3081
SG2001-24
SG1842
SG1843
SG1844
SG2074
SG2801-24
Transistor Array, High Current
Driver Array Series, 7 NPN’s
50 to 95V, 500 to 600ma
Quad 1.5A Darlington Switch
Driver Array Series, 8 NPN’s
50 to 95V, 500 to 600ma
MOSFET Drivers
SG1626
Dual High Speed MOSFET Driver
SG1644
Inverting, Dual High Speed
MOSFET Driver
Operational Amplifier
SG143
Op Amp, 4V to 40V Supply
SG1436
Op Amp, High Voltage
SG1536
Op Amp, Low Offset, High Voltage
SG2101
Dual Op Amp, Un-compensated
Voltage Reference
SG1503
Precision Reference, 2.5V
Supervisory
SG1543
Power Supply Supervisory Circuit
SG1544
Power Supply Supervisory Circuit
Low Voltage Option
SG1548
Quad Power Fault Monitor
SG1549
Current Sense Latch
Power Supply Circuits
SG1846
Linear Voltage Regulators
SG109
Positive 5.0V Fixed, 1A
SG117
Positive Adjustable, 1.5A
SG117A
Positive Adjustable, +/-1% Tol., 1.5A
SGR117A
Rad Hard Positive, Adjustable, 1.5A
SG120
Negative: 5, 5.2, 8, 12, 15, 18, 20, 24V
SG120A
Negative: 5, 5.2, 8, 12, 15, 18, 20, 24V
SG137
Negative, Adjustable
SG137A
Negative, Adj., +/-1% Tol, 1.5A
SG140
Positive: 5, 5.2, 6, 8, 12, 15, 18, 20, 24V
SG140A
Positive: 5, 5.2, 6, 8, 12, 15, 18, 20, 24V
SG723
Precision Regulator/Controller, Adj.
Positive or Negative Output
SG1532
Precision Regulator/Controller, Adj.
Positive or Negative Output
SG78xx
Positive: 5, 6, 8, 12, 15, 18, 20, 24V Fixed
SG78xxA
Positive: 5, 6, 8, 12, 15, 18, 20, 24V Fixed
SG79xx
Negative 5, 5.2, 8, 12, 15, 18, 20, 24V
Fixed
SG79xxA
Negative 5, 5.2, 8, 12, 15, 18, 20, 24V
Fixed
HIGH REL PRODUCTS
Pulse Width Modulator IC Controllers
SG1524
Voltage Mode PWM
SG1524B
Voltage Mode PWM, +/-1% Ref.
SG1525A
Voltage Mode PWM, Dual Sink
/Source Outputs
SG1526
Voltage Mode PWM, 300Khz
SG1526B
Voltage Mode PWM, 500Khz
SG1527A
Voltage Mode PWM, Inverted
Output from SG1525A
SG1529
Voltage Mode PWM, Inverted
SG1731
PWM Motor Controller
SG1825C
Current Mode PWM, 1.5Mhz
SG1845
Current Mode PWM, Off-line, 16V UVLO
Current Mode PWM, Off-line, 8V UVLO
Current Mode PWM, Off-line, 16V UVLO,
Max Duty Cycle 100%
Current Mode PWM, Off-line, 16V UVLO,
Max Duty Cycle 50%
Current Mode PWM, Dual Sink/Source
Outputs, 8-40V
WWW . Microsemi .C OM
Linear Circuits
3
3
Product Listing Sorted by SMD then by JAN Number
Product Listing Sorted by SMD and JAN Number
Microsemi
AMSG
Part Number
(/883B)
5962-86058012A
SG2803J
5962-8605801VA
SG1842J
5962-8670401CA
SG1842Y
5962-8670401PA
SG1843J
5962-8670402CA
SG1843Y
5962-8670402PA
SG1844J
5962-8670403CA
SG1844Y
5962-8670403PA
SG1845J
5962-8670404CA
SG1845Y
5962-8670404PA
SG1846J
5962-8680601EA
SG1549Y
5962-8684901PA
SG1503T
5962-8686101YA
SG1842L
SG1842F
SG1843L
SG1843F
SG1844L
SG1844F
SG1845L
SG1845F
SG1846L
SG1846F
SG1503Y
SG1524BJ
SG1825CL
5962-86704012A
SG1532L
SG7812AIG
SG7812AT
5962-8777601TA
5962-87782012A
SG7805AG
SG7805AIG
5962-8778201TA
5962-88747012A
SG7912AIG
5962-8874701UA
5962-8874701TA
5962-8874701XA
5962-8874701YA
SG7915AL
5962-88748012A
SG7915AIG
5962-8874801UA
5962-8874701ZA
5962-8874801TA
5962-8874801XA
SG7915AK
5962-8874801YA
SG1525AJ
5962-8951101EA
M38510/12602BEA
SG1527AJ
5962-8951102EA
M38510/12604BVA
SG7806AT
5962-8962601XA
SG7806AR
4
5962-8874601ZA
SG7912AK
SG7806AK
4
5962-8874601XA
SG7912AL
SG7806AL
5962-8778201UA
5962-8874601TA
5962-8874601UA
5962-8874601YA
SG1525AF
5962-8777601ZA
5962-8871601XA
SG7905AK
SG7915AR
5962-8777601XA
SG7805AL
SG7812AR
5962-88746012A
SG7915AT
5962-8777601UA
5962-8777601YA
SG7905AL
SG7915AG
5962-8777001IA
5962-8871601GA
5962-8871601PA
SG7912AR
5962-87770012A
5962-8871601CA
SG1626Y
SG7912AT
5962-8774002VA
SG7812AK
5962-8866401EA
5962-8855401ZA
5962-8874801ZA
5962-8951101FA
5962-89626012A
5962-8962601YA
5962-8962601ZA
HIGH REL PRODUCTS
SG7812AG
SG3081J
SG7912AG
5962-87740012A
5962-87776012A
5962-8855401YA
SG7905AR
5962-8764501EA
5962-8855301ZA
SG7824AK
SG7905AT
5962-87681012A
SG7812AL
SG1532T
5962-8855401XA
SG7905AIG
5962-8686101PA
5962-8855301XA
SG7824AT
SG7905AG
5962-8680601FA
5962-8855301TA
5962-8855301YA
SG1626R
5962-86806012A
5962-8778201ZA
SG7815AK
SG1626T
5962-8670404HA
5962-8777001CA
5962-8855301UA
SG1626J
5962-86704042A
SG1532J
SG7815AIG
SG7824AR
5962-8670403HA
5962-8774001EA
5962-88553012A
SG7815AR
5962-86704032A
SG1543J
SG7815AL
SG7815AT
MIL-M-38510/
(JAN)
5962-8778201XA
5962-8778201YA
SG7815AG
5962-8670402HA
Standard
Microcircuit Drawing
(SMD)
SG7805AK
SG7805AR
5962-86704022A
5962-8768101EA
SG1544J
SG7805AT
M38510/14108BVA
5962-8670401HA
SG1825CJ
SG1543L
Microsemi
AMSG
Part Number
(/883B)
MIL-M-38510/
(JAN)
WWW . Microsemi .C OM
SG2803L
Standard
Microcircuit Drawing
(SMD)
Product Listing
Sorted
by SMD
thenand
by JAN
Number
Product
Listing
Sorted
by SMD
JAN
Number
Microsemi
AMSG
Part Number
(/883B)
Standard
Microcircuit Drawing
(SMD)
SG7808AG
SG7808AT
SG7808AK
SG7808AR
SG2821L
Standard
Microcircuit Drawing
(SMD)
5962-8962801TA
SG117AIG
7703405UA
5962-8962801XA
SG117AK
5962-8962801UA
5962-8962801YA
5962-8962801ZA
5962-8968401VA
SG2823J
5962-8968501VA
SG2824J
5962-8968601VA
SG7908AIG
5962-8987001UA
SG2823L
SG2824L
SG7908AG
SG7908AT
SG1548J
5962-8987801EA
SG7818AIG
5962-8991501UA
SG2023F
SG7818AL
SG7818AT
SG7820AK
5962-9152301MYA
SG7820AT
5962-9152301MXA
SG1644L
5962-9165301M2A
SG7818AR
SG7820AIG
SG7820AR
SG1644Y
5962-9165301MPA
SG1731J
SG117T
7703401XA
SG117IG
SG117K
SG117R
SG137L
SG137T
SG117AL
SG117AG
7703401ZA
M38510/10201BIA
M38510/10701BXA
SG7805T
M38510/10702BXA
M38510/11505BYA
M38510/11506BYA
M38510/11507BYA
M38510/11508YA
M38510/14103BEA
M38510/14102BEA
M38510/14104BEA
M38510/14105BEA
M38510/14106BVA
M38510/14107BVA
SG2803J
M38510/14108BVA
SG2805J
M38510/14110BVA
SG2804J
5
M38510/11504XA
SG2003J
SG2802J
5
M38510/11502BXA
M38510/14101BEA
SG2801J
7703405TA
M38510/10708BYA
SG2001J
SG2005J
77034052A
M38510/10707BYA
M38510/11503BXA
SG2004J
77034032A
M38510/10703BXA
SG7915T
SG2002J
7703403XA
M38510/10706BYA
M38510/11501BXA
SG7924K
M38510/11704BYA
M38510/10704BXA
SG7905T
SG7915K
M38510/11703BXA
M38510/10201BHA
SG109T
SG7912K
7703401UA
7703401YA
SG723T
SG7905K
77034012A
7703401TA
M38510/10105BEA
M38510/10201BCA
SG7924T
5962-9669901MEA
85515012A
SG723J
SG7912T
5962-9165301MGA
SG117G
M38510/12603BVA
7800304XA
M38510/14109BVA
HIGH REL PRODUCTS
SG117L
8551501VA
SG7815K
5962-9152301MZA
5962-9165301MCA
SG1644T
SG1526BJ
SG7812K
5962-9152301MUA
SG1644J
M38510/12601BEA
SG7812T
5962-8991501ZA
7800303XA
7802801EA
SG7805K
5962-8991501XA
5962-8991501YA
7800303PA
SG1524J
SG7815T
5962-89915012A
77034062A
7800304PA
SG723F
5962-8987601FA
7703405YA
SG1536Y
SG2101AJ
5962-8987001ZA
SG7818AK
7703406XA
SG1526BL
5962-8987001XA
5962-8987601EA
SG137AT
SG1536T
5962-8987001TA
SG2023J
SG7908AR
7703405ZA
SG143T
5962-89686012A
5962-8987001YA
SG117AR
SG143Y
5962-89685012A
SG7908AK
7703405XA
SG137AL
5962-89684012A
SG2821J
SG117AT
MIL-M-38510/
(JAN)
WWW . Microsemi .C OM
SG7808AIG
Microsemi
AMSG
Part Number
(/883B)
MIL-M-38510/
(JAN)
Available Package
Package Types
Available
Types
Ceramic Dual-In-Line (DIP),
Microsemi designator “Y”: 8 pin
Microsemi designator “J”: 14, 16 and 18 pin
Ceramic Leadless Chip Carrier
(LCC), Microsemi designator “L”: 20 pin
Metal Cans
Low Current (500ma)
TO-39, Microsemi designator “T”: 3 pin
TO-99, Microsemi designator “T”: 8 pin
TO-100, Microsemi designator “T”: 10 pin
Medium Current (1A)
TO-66, Microsemi designator “R”: 3 and 5 pin
High Current (>1.5A)
TO-3, Microsemi designator “K”: 3 pin
Metal Case with mounting tab,
TO-257: 3 pin
Insulated case, Microsemi designator “IG”
Non-insulated case, Microsemi designator “G”
6
6
WWW . Microsemi .C OM
Ceramic Flat Pack (Cerpac), Microsemi designator “F”: 10, 14, 16, 20 and 24 pin
Screening Standards
Screening
Standards
Customer Generated Source Control Drawings (SCD)
Microsemi fully reviews the customer requirements, both the technical and processing, as
specified in the SCD and purchase order. A special processing document (SPS) is
generated by Microsemi to assure that the requirements of the SCD are met.
•
MIL-STD-883, paragraph 1.2.1 compliant
The process flow is defined in Method 5004, Class S. The quality
conformance inspection is defined in Method 5005, Class S.
•
SCC / ESA 9000, Level B (Class S) compliant
WWW . Microsemi .C OM
Microsemi Standard Class S Flow
Microsemi has documented two standard Class S Flows, in the event an SCD is not
published.
Microsemi Custom Class S Flow
The standard Class S flow can be modified by adding or deleting screening procedures or
process controls to fit the customer’s needs. The negotiated processing requirements are
documented in an SPS traveler to assure compliance to the purchase order requirements.
Other Offerings
Radiation Hardness Assurance (RHA)
Many products offered by Microsemi have been tested for radiation hardness. Contact the
factory for generic data by device type. Radiation testing on a lot or wafer basis may be
specified.
Customer or Government Source Inspection
On-site inspections are available at any pokjint in the processing or acceptance testing.
HIGH REL PRODUCTS
7
7
Microsemi Corporation
Analog Mixed Signal Group
High Reliability ICs
One Enterprise
Aliso Viejo, CA 92656
www.microsemi.com
MS3-01100-12