Please contact the sales people for detailed datasheet! LS SERIES 25W SPECIFICATIONS 12~35W IP30 Rated LED Power Supplies FEATURES > 2 Year Warranty > IP30 Rated for Indoor Lighting > Class II, No FG > 100% Burn-in Test > Cooling by Free Air Convection > 2 Year Warranty > IP30 Rated for Indoor Lighting > Class II, No FG > 100% Burn-in Test > Cooling by Free Air Convection Constant Voltage MODELS Output TOL. RIPPLE EFF. Model Output TOL. RIPPLE 350mA (42~70V) ±5% 300mAp-p 83% LSU25-V5 5V (0~3.5A) ±5% 120mVp-p 75% LSU25-C500 500mA (30~50V) ±5% 300mAp-p 85% LSU25-V12 12V (0~2.1A) ±5% LSU25-C700 700mA (22~36V) ±5% 300mAp-p 86% LSU25-V15 15V (0~1.68A) ±5% LSU25-C1050 1050mA (15~24V) ±5% 300mAp-p 86% LSU25-V24 24V (0~1.05A) LSU25-V36 36V (0~0.7A) EFF. ENVIRONMENT SAFETY MODELS Model Output TOL. RIPPLE EFF. Model Output TOL. RIPPLE EFF. LSU35-C350 350mA (60~100V) ±5% 350mAp-p 87% LSU35-V5 5V (0~5A) ±5% 120mVp-p 75% 150mVp-p 82% LSU35-C500 500mA (42~70V) ±5% 350mAp-p 86% LSU35-V12 12V (0~3A) ±5% 150mVp-p 82% 120mVp-p 78% LSU35-C700 700mA (30~50V) ±5% 350mAp-p 86% LSU35-V15 15V (0~1.68A) ±5% 150mVp-p 78% ±5% 150mVp-p 84% LSU35-C1050 1050mA (20~33V) ±5% 350mAp-p 85% LSU35-V24 24V (0~1.5A) ±5% 180mVp-p 84% ±5% 150mVp-p 86% LSU35-V36 36V (0~1A) ±5% 180mVp-p 86% CHARACTERISTICS VOLTAGE RANGE, FREQUENCY 90-264VAC/120-370VDC, 47~63Hz INPUT CURRENT (Typ.) 0.8A/115VAC, 0.4A/230VAC(full load) INRUSH CURRENT (Typ.) COLD START, 45A/230VAC LINE REGULATION ±1% LOAD REGULATION ±3% SETUP, RISE TIME (Typ.) VOLTAGE RANGE, FREQUENCY 90-264VAC/120-370VDC, 47~63Hz INPUT CURRENT (Typ.) 0.75A/115VAC, 0.5A/230VAC(full load) INRUSH CURRENT (Typ.) COLD START, 45A/230VAC LINE REGULATION ±1% LOAD REGULATION ±3% 1500ms, 30ms/230VAC at full load SETUP, RISE TIME (Typ.) 1500ms, 40ms/230VAC at full load SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed OPERATING Temperature -25°C ~ +70°C(derating required), Humidity 20 ~ 90% RH non-condensing OPERATING Temperature -25°C ~ +70°C(derating required), Humidity 20 ~ 90% RH non-condensing STORAGE Temperature -40°C ~ +80°C, Humidity 10 ~ 95% RH STORAGE Temperature -40°C ~ +80°C, Humidity 10 ~ 95% RH TEMPERATURE COEFFICIENT ±0.2%/°C (0-50°C) TEMPERATURE COEFFICIENT ±0.2%/°C (0-50°C) SAFETY STANDARDS Design refer to EN61347-1, EN61347-2-13 SAFETY STANDARDS Design refer to EN61347-1, EN61347-2-13 EMC Compliance to EN55015, EN61000-3-2, EN61000-3-3, EN61000-4-2, 3, 4, 5, 6, 8, 11, EN61547 EMC Compliance to EN55015, EN61000-3-2, EN61000-3-3, EN61000-4-2, 3, 4, 5, 6, 8, 11, EN61547 MTBF 400K hours min. MIL-HDBK-217F (25°C) MTBF 400K hours min. MIL-HDBK-217F (25°C) INPUT OUTPUT PROTECTION ENVIRONMENT SAFETY * Unless otherwise specified, all the above parameters are measured at ambient temperature of 25°C and Vin=115VAC/230VAC * Unless otherwise specified, all the above parameters are measured at ambient temperature of 25°C and Vin=115VAC/230VAC MECHANICAL SPECIFICATION MECHANICAL SPECIFICATION 3 Dimensions in mm Dimensions in mm Weight: 150g Weight: 150g 3 150±10 18 AWG DC OUT 84 15.3 15.3 84 RED BLACK 7.3 AC IN BLUE BROWN 18 AWG 3 AC IN 3 84 18 AWG 18 AWG www.pairuigroup.com | [email protected] | Tel: 86 (514) 8279 1592 30 30 84 15,3 150±10 15,3 18 AWG RED BLACK 57 7.3 150±10 BLUE BROWN 150±10 18 AWG DC OUT 7,3 57 7,3 34 LS SERIES CHARACTERISTICS PROTECTION Constant Voltage MODELS Model OUTPUT SPECIFICATIONS Constant Current MODELS LSU25-C350 INPUT 35W 12~35W IP30 Rated LED Power Supplies FEATURES Constant Current LS SERIES LS SERIES 18 AWG 18 AWG 35