200 nA Microprocessor Power Supply Supervisors

CAT8801
200 nA Microprocessor
Power Supply Supervisors
Description
The CAT8801 is a supervisory circuit that monitors power supplies
in digital systems and provides a reset signal whenever the system’s
input voltage is below a prescribed minimum level. The CAT8801
replaces popular voltage supervisors such as MAX809 in applications
where operating current is a primary consideration.
CAT8801 generates a reset signal, which is asserted while the power
supply voltage is below a preset threshold level and remains asserted
for at least 140 ms after the power supply level has risen above that
level. Nine industry standard threshold levels are offered to support
+5.0 V, +3.3 V, +3.0 V, +2.5 V and +1.8 V systems. ON Semiconductor’s
floating gate technology, used in programming the trigger thresholds,
makes it possible to quickly offer any custom reset threshold value
should the 9 standard voltage thresholds not meet a system’s needs.
The CAT8801 features a Push−Pull CMOS RESET output (active
LOW) and is fully specified over the industrial temperature range of
−40°C to 85°C.
CAT8801 is available in compact 3−pin SOT23 and SC−70
packages.
• Precision Voltage Monitoring of +1.8 V, +2.5 V, +3.0 V, +3.3 V and
+5.0 V Power Supplies
Ultra Low 200 nA Supply Current
±1.2% Voltage Threshold Accuracy
270 ms Power−On Reset Timeout
Reset Signal Valid Down to VCC = 1 V
No External Components Necessary
High Immunity to Power−Supply Transients
Industrial Temperature Range: −40°C to +85°C
Available in RoHS−compliant SOT−23 and SC−70 Packages
Applications
•
•
•
•
•
•
•
•
Computers
Servers
Laptops
Cable Modems
Wireless Communications
Embedded Control Systems
Power Meters
PDAs and Handheld Equipment
© Semiconductor Components Industries, LLC, 2010
May, 2010 − Rev. 4
SOT−23
TB SUFFIX
CASE 527AG
SC−70
SD SUFFIX
CASE 419AB
PIN CONNECTIONS
1
GND
CAT8801
3
VCC
2
Features
•
•
•
•
•
•
•
•
http://onsemi.com
RESET
3−Lead SOT−23
3−Lead SC−70
(Top View)
THRESHOLD SUFFIX SELECTOR
Threshold Suffix
Nominal Threshold
L
4.625
M
4.380
T
3.075
S
2.925
R
2.630
Z
2.320
Y
2.190
W
1.670
V
1.580
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 7 of this data sheet.
1
Publication Order Number:
CAT8801/D
CAT8801
Table 1. PIN DESCRIPTION
Pin #
Name
1
GND
2
RESET
3
VCC
Description
Ground
Active LOW reset. RESET is asserted if VCC falls below the reset threshold and remains low for at least
140 ms after VCC rises above the reset threshold.
Power supply voltage that is monitored.
Block Diagram
VCC
VCC
VCC
TOLERANCE
BIAS
+
DIGITAL
DELAY
–
RESET
VOLTAGE
REFERENCE
CAT8801
GND
Table 2. ABSOLUTE MAXIMUM RATINGS
Parameters
Ratings
Units
−0.3 to +6.0
V
20
mA
Output Current, RESET
20
mA
Rate of Rise, VCC
100
V/ms
Any pin with respect to ground
Input Current, VCC
Continuous Power Dissipation
mW
Derate 2.2 mW/°C above 70°C (SC−70)
175
Derate 4 mW/°C above 70°C (SOT−23)
320
Operating Temperature Range
−40 to +85
°C
Storage Temperature Range
−65 to +150
°C
300
°C
Lead Soldering Temperature (10 seconds)
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
http://onsemi.com
2
CAT8801
Table 3. ELECTRICAL CHARACTERISTICS (Note 1)
(VCC = Full range, TA = −40°C to +85°C unless otherwise noted. Typical values at TA = +25°C.)
Parameter
Symbol
VCC Range
ICC
VTH
Test Conditions
Min
TA = 0°C to +70°C
TA = −40°C to +85°C
Supply Current
Reset Threshold Voltage (Note 2)
L
M
T
S
R
Z
Y
W
V
VTH_HYS
Typ
Max
Units
1.0
5.5
V
1.2
5.5
VTH < VCC < 5.5 V
200
400
VTH < VCC < 3.6 V
175
350
4.625
4.681
TA = +25°C
4.570
TA = −40°C to +85°C
4.500
TA = +25°C
4.327
TA = −40°C to +85°C
4.262
TA = +25°C
3.038
TA = −40°C to +85°C
3.000
TA = +25°C
2.890
TA = −40°C to +85°C
2.850
TA = +25°C
2.598
TA = −40°C to +85°C
2.559
TA = +25°C
2.292
TA = −40°C to +85°C
2.257
TA = +25°C
2.164
TA = −40°C to +85°C
2.131
TA = +25°C
1.650
TA = −40°C to +85°C
1.625
TA = +25°C
1.561
TA = −40°C to +85°C
1.537
Threshold Hysteresis
4.380
4.433
4.498
3.075
3.112
3.150
2.925
2.960
3.000
2.630
2.662
2.701
2.320
2.348
2.383
2.190
2.216
2.249
1.670
1.690
1.715
1.580
1.599
1.623
2
VCC = VTH to (VTH – 100 mV)
Reset Active Timeout Period
TA = −40°C to +85°C
VOL
RESET Output Voltage Low
ISINK = 2 mA
VOH
RESET Output Voltage High
ISOURCE = 0.5 mA
1. Production testing done at TA = +25°C; limits over temperature guaranteed by design.
2. Measured on falling edge of VCC.
http://onsemi.com
3
140
0.8 x VCC
V
4.750
Reset Threshold Temperature Coefficient
VCC to Reset Delay
nA
%
0.1
mV/°C
20
50
ms
270
460
ms
0.4
V
V
CAT8801
TYPICAL OPERATING CHARACTERISTICS
(VCC = Full range, TA = −40°C to +85°C unless otherwise noted. Typical values at TA = +25°C.)
350
220
VCC = 5.5 V
VCC = 5.5 V
200
180
ISB (nA)
tRST (ms)
300
250
VCC = 1.8 V
160
140
VCC = 1.8 V
120
200
−50
−25
0
25
50
75
100
−50
100
0
25
50
75
TEMPERATURE (°C)
TEMPERATURE (°C)
Figure 1. Power−Up Reset Timeout
Figure 2. Supply Current vs. Temperature
100
1.003
NORMALIZED THRESHOLD
5.0
POWER−DOWN RESET DELAY (ms)
−25
4.5
4.0
3.5
3.0
2.5
−50
−25
0
25
50
75
1.002
1.001
1.000
0.999
0.998
0.997
0.996
−50
100
−25
0
25
50
75
100
125
TEMPERATURE (°C)
TEMPERATURE (°C)
Figure 3. Power−Down Reset Delay vs.
Temperature
Figure 4. Normalized Reset Threshold vs.
Temperature
150
Description
Reset Timing
The reset signal is asserted LOW for the CAT8801 when the power supply voltage falls below the threshold trip voltage and
remains asserted for at least 140 ms after the power supply voltage has risen above the threshold.
Power
Supply
Voltage
RESET
Threshold
Voltage
5V
0V
Reset Timeout Period
140ms
minimum
5V
0V
Figure 5. Reset Timing Diagram
http://onsemi.com
4
CAT8801
PACKAGE DIMENSIONS
SC−70, 3 Lead, 1.25x2
CASE 419AB−01
ISSUE O
D
SYMBOL
MIN
A
0.80
E1 E
A1
0.00
A2
0.80
b
0.15
0.10
0.90
1.00
0.30
0.08
1.80
2.00
2.20
E
1.80
2.10
2.40
E1
1.15
1.25
1.35
0.22
0.65 BSC
0.26
L1
0.36
0.46
0.42 REF
0.15 BSC
L2
TOP VIEW
1.10
c
L
e
MAX
D
e
e
NOM
θ
0º
8º
θ1
4º
10º
q1
A2 A
q
q1
b
L
L1
A1
SIDE VIEW
c
END VIEW
Notes:
(1) All dimensions are in millimeters. Angles in degrees.
(2) Complies with JEDEC MO-203.
http://onsemi.com
5
L2
CAT8801
PACKAGE DIMENSIONS
SOT−23, 3 Lead
CASE 527AG−01
ISSUE O
D
SYMBOL
MIN
A
0.89
1.12
A1
0.013
0.10
b
0.37
0.50
c
0.085
0.18
D
2.80
3.04
E
2.10
2.64
E1
1.20
1.40
3
E1
1
E
2
e
MAX
e
0.95 BSC
e1
1.90 BSC
L
0.40 REF
e1
L1
TOP VIEW
θ
A
NOM
0.54 REF
0º
8º
q
b
L1
A1
SIDE VIEW
L
END VIEW
Notes:
(1) All dimensions are in millimeters. Angles in degrees.
(2) Complies with JEDEC TO-236.
http://onsemi.com
6
c
CAT8801
Example of Ordering Information (Note 3)
Prefix
Device #
Suffix
CAT
8801
L
Company ID
(Optional)
Product
Number
8801
Trip Level
L: 4.625 V
M: 4.380 V
T: 3.075 V
S: 2.925 V
R: 2.630 V
Z: 2.320 V
Y: 2.190 V
W: 1.670 V
V: 1.580 V
TB
−G
T10
Package
Lead Finish
G: NiPdAu
Tape & Reel (Note 6)
T: Tape & Reel
3: 3,000 / Reel
TB: SOT−23 Green
SD: SC70 Green
ORDERING INFORMATION
3.
4.
5.
6.
Parts and
Threshold
Voltage
SOT−23
Green NiPdAu Lead Finish (Note 5)
SC−70
Green NiPdAu Lead Finish
CAT8801L
4.625
CAT8801LTB−GT3
CAT8801LSD−GT3
CAT8801M
4.380
CAT8801MTB−GT3
CAT8801MSD−GT3
CAT8801T
3.075
CAT8801TTB−GT3
CAT8801TSD−GT3
CAT8801S
2.925
CAT8801STB−GT3
CAT8801SSD−GT3
CAT8801R
2.630
CAT8801RTB−GT3
CAT8801RSD−GT3
CAT8801Z
2.320
CAT8801ZTB−GT3
CAT8801ZSD−GT3
CAT8801Y
2.190
CAT8801YTB−GT3
CAT8801YSD−GT3
CAT8801W
1.670
CAT8801WTB−GT3
CAT8801WSD−GT3
CAT8801V
1.580
CAT8801VTB−GT3
CAT8801VSD−GT3
All packages are RoHS−compliant (Lead−free, Halogen−free).
The device used in the above example is a CAT8801LTB−GT3 (4.625 V, SOT−23, NiPdAu, Tape & Reel, 3,000/Reel).
For availability of the various voltage, package and temperature options, please contact your nearest ON Semiconductor sales office.
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
http://onsemi.com
7
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
CAT8801/D
Similar pages