Amplifier Transistor NPN

MPS918, MPS3563
MPS918 is a Preferred Device
Amplifier Transistors
NPN Silicon
Features
• Pb−Free Packages are Available*
http://onsemi.com
COLLECTOR
3
MAXIMUM RATINGS
Rating
Symbol
Collector −Emitter Voltage
Value
VCEO
MPS918
MPS3563
Collector −Base Voltage
Vdc
1
EMITTER
15
12
VCBO
MPS918
MPS3563
Emitter −Base Voltage
Vdc
30
30
VEBO
MPS918
MPS3563
MARKING
DIAGRAM
Vdc
3.0
2.0
Collector Current − Continuous
IC
50
mAdc
Total Device Dissipation @ TA = 25°C
Derate above 25°C
PD
350
2.8
mW
mW/°C
Total Device Dissipation @ TC = 25°C
Derate above 25°C
PD
0.85
6.8
W
mW/°C
−55 to +150
°C
Operating and Storage Junction
Temperature Range
2
BASE
Unit
TJ, Tstg
THERMAL CHARACTERISTICS
Characteristic
Symbol
Max
Unit
Thermal Resistance, Junction−to−Ambient
(Note 1)
RqJA
357
°C/W
Thermal Resistance, Junction−to−Case
RqJC
147
°C/W
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits are
exceeded, device functional operation is not implied, damage may occur and
reliability may be affected.
1. RqJA is measured with the device soldered into a typical printed circuit board.
TO−92
CASE 29−11
STYLE 1
1
2
MPS
xxxx
AYWW G
G
3
MPSxxxx = Device Code
xxxx = 918 or 3563
A
= Assembly Location
Y
= Year
WW
= Work Week
G
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
Device
MPS918
Package
Shipping †
TO−92
5000 Units/Box
MPS918G
TO−92
(Pb−Free)
5000 Units/Box
MPS3563
TO−92
5000 Units/Box
TO−92
(Pb−Free)
5000 Units/Box
TO−92
2000/Tape & Reel
TO−92
(Pb−Free)
2000/Tape & Reel
MPS3563G
MPS3563RLRA
MPS3563RLRAG
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2006
January, 2006 − Rev. 3
1
Preferred devices are recommended choices for future use
and best overall value.
Publication Order Number:
MPS918/D
MPS918, MPS3563
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Characteristic
Symbol
Min
Max
Unit
15
12
−
−
30
30
−
−
3.0
2.0
−
−
−
−
10
50
20
20
−
200
VCE(sat)
−
0.4
Vdc
VBE(sat)
−
1.0
Vdc
600
600
−
1500
−
−
−
3.0
1.7
1.7
Cibo
−
2.0
pF
hfe
20
250
−
NF
−
6.0
dB
15
14
−
−
Pout
30
−
mW
η
25
−
%
OFF CHARACTERISTICS
Collector −Emitter Breakdown Voltage (Note 2)
(IC = 3.0 mAdc, IB = 0)
V(BR)CEO
MPS918
MPS3563
Collector −Base Breakdown Voltage
(IC = 1.0 mAdc, IE = 0)
(IC = 100 mAdc, IE = 0)
Vdc
V(BR)CBO
MPS918
MPS3563
Emitter −Base Breakdown Voltage
(IE = 10 mAdc, IC = 0)
Vdc
V(BR)EBO
MPS918
MPS3563
Collector Cutoff Current
(VCB = 15 Vdc, IE = 0)
Vdc
ICBO
MPS918
MPS3563
nAdc
ON CHARACTERISTICS
DC Current Gain (Note 2)
(IC = 3.0 mAdc, VCE = 1.0 Vdc)
(IC = 8.0 mAdc, VCE = 10 Vdc)
MPS918
MPS3563
hFE
Collector −Emitter Saturation Voltage
(IC = 10 mAdc, IB = 1.0 mAdc)
MPS918
Base −Emitter Saturation Voltage
(IC = 10 mAdc, IB = 1.0 mAdc)
MPS918
−
SMALL− SIGNAL CHARACTERISTICS
Current −Gain − Bandwidth Product (Note 2)
(IC = 4.0 mAdc, VCE = 10 Vdc, f = 100 MHz)
(IC = 8.0 mAdc, VCE = 10 Vdc, f = 100 MHz)
MPS918
MPS3563
fT
Output Capacitance
(VCB = 0 Vdc, IE = 0, f = 1.0 MHz)
(VCB = 10 Vdc, IE = 0, f = 1.0 MHz)
(VCB = 10 Vdc, IE = 0, f = 1.0 MHz)
MPS918
MPS918
MPS3563
Input Capacitance
(VEB = 0.5 Vdc, IC = 0, f = 1.0 MHz)
MPS918
MHz
Cobo
Small−Signal Current Gain
(IC = 8.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz)
pF
MPS3563
Noise Figure
(IC = 1.0 mAdc, VCE = 6.0 Vdc, RS = 400 kW, f = 60 MHz)
MPS918
FUNCTIONAL TEST
Common−Emitter Amplifier Power Gain
(IC = 6.0 mAdc, VCB = 12 Vdc, f = 200 MHz)
(IC = 8.0 mAdc, VCE = 10 Vdc, f = 200 MHz)
(Gfd + Gre t −20 dB)
MPS918
MPS3563
Power Output
(IC = 8.0 mAdc, VCB = 15 Vdc, f = 500 MHz)
MPS918
Oscillator Collector Efficiency
(IC = 8.0 mAdc, VCB = 15 Vdc, Pout = 30 mW, f = 500 MHz)
MPS918
Gpe
2. Pulse Test: Pulse Width v 300 ms; Duty Cycle v 1.0%.
http://onsemi.com
2
dB
MPS918, MPS3563
PACKAGE DIMENSIONS
TO−92 (TO−226)
CASE 29−11
ISSUE AL
A
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. CONTOUR OF PACKAGE BEYOND DIMENSION R
IS UNCONTROLLED.
4. LEAD DIMENSION IS UNCONTROLLED IN P AND
BEYOND DIMENSION K MINIMUM.
B
R
P
L
SEATING
PLANE
DIM
A
B
C
D
G
H
J
K
L
N
P
R
V
K
D
X X
G
J
H
V
C
SECTION X−X
1
N
INCHES
MIN
MAX
0.175
0.205
0.170
0.210
0.125
0.165
0.016
0.021
0.045
0.055
0.095
0.105
0.015
0.020
0.500
−−−
0.250
−−−
0.080
0.105
−−− 0.100
0.115
−−−
0.135
−−−
MILLIMETERS
MIN
MAX
4.45
5.20
4.32
5.33
3.18
4.19
0.407
0.533
1.15
1.39
2.42
2.66
0.39
0.50
12.70
−−−
6.35
−−−
2.04
2.66
−−−
2.54
2.93
−−−
3.43
−−−
STYLE 1:
PIN 1. EMITTER
2. BASE
3. COLLECTOR
N
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800−282−9855 Toll Free
Literature Distribution Center for ON Semiconductor
USA/Canada
P.O. Box 61312, Phoenix, Arizona 85082−1312 USA
Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada
Phone: 81−3−5773−3850
Email: [email protected]
http://onsemi.com
3
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
For additional information, please contact your
local Sales Representative.
MPS918/D
Similar pages