80V, 30A SWITCHMODE POWER RECTIFIER

MBR30H80CT,
MBRB30H80CT-1
SWITCHMODE™
Power Rectifier
80 V, 30 A
http://onsemi.com
Features and Benefits
•
•
•
•
SCHOTTKY BARRIER
RECTIFIER
30 AMPERES
80 VOLTS
Low Power Loss/High Efficiency
High Surge Capacity
30 A Total (15 A Per Diode Leg)
These are Pb−Free Devices
Applications
1
• Power Supply − Output Rectification
• Power Management
• Instrumentation
2, 4
3
•
•
•
•
•
•
MARKING
DIAGRAM
4
Mechanical Characteristics:
Case: Epoxy, Molded
Epoxy Meets UL 94 V−0 @ 0.125 in
Weight: 1.9 Grams (Approximately)
Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
Lead Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
ESD Rating:
Human Body Model = 3B
Machine Model = C
TO−220AB
CASE 221A
PLASTIC
1
2
AYWW
B30H80G
AKA
3
4
I2PAK (TO−262)
CASE 418D
PLASTIC
STYLE 3
MAXIMUM RATINGS
Please See the Table on the Following Page
AYWW
B30H80G
AKA
12
3
A
Y
WW
B30H80
G
AKA
= Assembly Location
= Year
= Work Week
= Device Code
= Pb−Free Package
= Polarity Designator
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
© Semiconductor Components Industries, LLC, 2009
February, 2009 − Rev. 2
1
Publication Order Number:
MBR30H80CT/D
MBR30H80CT, MBRB30H80CT−1
MAXIMUM RATINGS (Per Diode Leg)
Rating
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
80
V
Average Rectified Forward Current
(TC = 130°C)
Per Diode
Per Device
IF(AV)
Peak Repetitive Forward Current
(Square Wave, 20 kHz, TC = 130°C)
IFM
30
A
Nonrepetitive Peak Surge Current
(Surge applied at rated load conditions halfwave, single phase, 60 Hz)
IFSM
240
A
Storage Temperature
Tstg
−65 to +175
°C
Operating Junction Temperature (Note 1)
TJ
−20 to +150
°C
> 400
> 8000
V
A
15
30
ESD Ratings: Machine Model = C
Human Body Model = 3B
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. The heat generated must be less than the thermal conductivity from Junction−to−Ambient: dPD/dTJ < 1/RqJA.
THERMAL CHARACTERISTICS
Characteristic
Symbol
Value
RqJC
RqJA
2.0
70
Maximum Thermal Resistance
− Junction−to−Case
− Junction−to−Ambient
Unit
°C/W
ELECTRICAL CHARACTERISTICS (Per Diode Leg)
Characteristic
Symbol
Maximum Instantaneous Forward Voltage (Note 2)
(iF = 3 A, TJ = 25°C)
(iF = 3 A, TJ = 25°C)
(iF = 15 A, TJ = 25°C)
(iF = 15 A, TJ = 125°C)
(iF = 30 A, TJ = 25°C)
(iF = 30 A, TJ = 125°C)
vF
Maximum Instantaneous Reverse Current (Note 2)
(Rated DC Voltage, TJ = 125°C)
(Rated DC Voltage, TJ = 25°C)
iR
Min
Typ
Max
−
−
−
−
−
−
0.49
0.37
0.65
0.55
0.77
0.67
0.58
0.45
0.78
0.65
0.88
0.75
−
−
12
0.017
35
0.250
V
mA
2. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%.
DEVICE ORDERING INFORMATION
Package Type
Shipping†
MBR30H80CTG
TO−220
(Pb−Free)
50 Units / Rail
MBRB30H80CT−1G
I2PAK
(Pb−Free)
50 Units / Rail
Device Order Number
http://onsemi.com
2
Unit
MBR30H80CT, MBRB30H80CT−1
100
IF, INSTANTANEOUS FORWARD
CURRENT (A)
IF, INSTANTANEOUS FORWARD
CURRENT (A)
100
10
150°C
TJ = 25°C
1
125°C
0
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
125°C
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9 1.0
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
Figure 1. Typical Forward Voltage
Figure 2. Maximum Forward Voltage
1.0E−01
150°C
150°C
1.0E−02
IR, REVERSE CURRENT (A)
IR, REVERSE CURRENT (A)
1.0E−03
125°C
1.0E−03
125°C
1.0E−04
1.0E−04
1.0E−05
TJ = 25°C
1.0E−05
1.0E−06
1.0E−06
TJ = 25°C
10
20
30
40
50
60
70
80
1.0E−07
0
10
20
30
40
50
60
70
VR, REVERSE VOLTAGE (V)
VR, REVERSE VOLTAGE (V)
Figure 3. Typical Reverse Current
Figure 4. Maximum Reverse Current
80
6
RqJC = 2°C/W
dc
IF, AVERAGE FORWARD CURRENT
(A)
IF, AVERAGE FORWARD CURRENT
(A)
150°C
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
1.0E−02
30
28
26
24
22
20
18
16
14
12
10
8
6
4
2
0
80
TJ = 25°C
1.0
0.1
0.0
1.0
1.0E−01
1.0E−07
0
10.0
SQUARE WAVE
90
100
110
120
130
140
150
RJA = 70°C/W
5
dc
4
3
2
SQUARE WAVE
1
0
0
20
40
60
80
100
120
140 160
TC, CASE TEMPERATURE (°C)
TA, AMBIENT TEMPERATURE (°C)
Figure 5. Current Derating, Case per Leg
Figure 6. Current Derating, Ambient per Leg
http://onsemi.com
3
30
28
26
24
22
20
18
16
14
12
10
8
6
4
2
0
10000
TJ = 150°C
VR, REVERSE VOLTAGE (V)
PFO, AVERAGE POWER
DISSIPATION (W)
MBR30H80CT, MBRB30H80CT−1
SQUARE WAVE
dc
0
2
TJ = 25°C
1000
100
4 6 8 10 12 14 16 18 20 22 24 26 28 30
IO, AVERAGE FORWARD CURRENT (A)
10
0
10
20
R(t), TRANSIENT THERMAL RESISTANCE
Figure 7. Forward Power Dissipation
30
40
50
60
C, CAPACITANCE (pF)
70
80
Figure 8. Capacitance
100
D = 0.5
10
0.2
0.1
1
0.05
P(pk)
0.01
t1
0.1
t2
SINGLE PULSE
0.01
0.000001
0.00001
DUTY CYCLE, D = t1/t2
0.0001
0.001
0.1
0.01
1
10
100
1000
t1, TIME (sec)
R(t), TRANSIENT THERMAL RESISTANCE
Figure 9. Thermal Response Junction−to−Ambient
10
1
D = 0.5
0.2
0.1
0.05
P(pk)
0.1
t1
0.01
t2
DUTY CYCLE, D = t1/t2
SINGLE PULSE
0.01
0.000001
0.00001
0.0001
0.001
0.1
0.01
1
t1, TIME (sec)
Figure 10. Thermal Response Junction−to−Case
http://onsemi.com
4
10
100
1000
MBR30H80CT, MBRB30H80CT−1
PACKAGE DIMENSIONS
TO−220
CASE 221A−09
ISSUE AF
−T−
B
F
T
SEATING
PLANE
C
S
4
DIM
A
B
C
D
F
G
H
J
K
L
N
Q
R
S
T
U
V
Z
A
Q
U
1 2 3
H
K
Z
L
R
V
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION Z DEFINES A ZONE WHERE ALL
BODY AND LEAD IRREGULARITIES ARE
ALLOWED.
J
G
D
N
INCHES
MIN
MAX
0.570
0.620
0.380
0.405
0.160
0.190
0.025
0.035
0.142
0.161
0.095
0.105
0.110
0.155
0.014
0.025
0.500
0.562
0.045
0.060
0.190
0.210
0.100
0.120
0.080
0.110
0.045
0.055
0.235
0.255
0.000
0.050
0.045
----0.080
STYLE 6:
PIN 1.
2.
3.
4.
http://onsemi.com
5
ANODE
CATHODE
ANODE
CATHODE
MILLIMETERS
MIN
MAX
14.48
15.75
9.66
10.28
4.07
4.82
0.64
0.88
3.61
4.09
2.42
2.66
2.80
3.93
0.36
0.64
12.70
14.27
1.15
1.52
4.83
5.33
2.54
3.04
2.04
2.79
1.15
1.39
5.97
6.47
0.00
1.27
1.15
----2.04
MBR30H80CT, MBRB30H80CT−1
PACKAGE DIMENSIONS
I2PAK (TO−262)
CASE 418D−01
ISSUE D
C
E
V
−B−
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
4
A
W
1
2
DIM
A
B
C
D
E
F
G
H
J
K
S
V
W
3
F
−T−
SEATING
PLANE
K
S
J
G
D 3 PL
0.13 (0.005) M T B
H
M
STYLE 3:
PIN 1.
2.
3.
4.
INCHES
MIN
MAX
0.335
0.380
0.380
0.406
0.160
0.185
0.026
0.035
0.045
0.055
0.122 REF
0.100 BSC
0.094
0.110
0.013
0.025
0.500
0.562
0.390 REF
0.045
0.070
0.522
0.551
MILLIMETERS
MIN
MAX
8.51
9.65
9.65
10.31
4.06
4.70
0.66
0.89
1.14
1.40
3.10 REF
2.54 BSC
2.39
2.79
0.33
0.64
12.70
14.27
9.90 REF
1.14
1.78
13.25
14.00
ANODE
CATHODE
ANODE
CATHODE
SWITCHMODE is a trademark of Semiconductor Components Industries, LLC.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
http://onsemi.com
6
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
MBR30H80CT/D
Similar pages