DESCRIPTION 01 PRELIMINARY ER047691 BY APPD DATE JCF 4/15/13 KC 4/1/13 NOTES: UNLESS OTHERWISE SPECIFIED 1. INTERFACE COMPLIANT TO SMPTE 304 SPECIFICATION. REV 2. MATERIAL SPECIFICATIONS: CONTACTS: COPPER ALLOY O-RINGS AND STRAIN RELIEF: SILICONE RUBBER ALL PLASTIC PARTS: 20% GLASS FILLED POLYPROPYLENE ALL OTHER METAL PARTS: 303 STAINLESS STEEL PER ASTM A582 3. FINISH SPECIFICATIONS: STAINLESS STEEL PARTS: PASSIVATE CONTACTS: .000100 MIN GOLD PER ASTM B488 OVER .000080 MIN NICKEL PER AMS-QQN-290 (RoHS) 4. ELECTRICAL SPECIFICATIONS: LOW VOLTAGE CONTACTS: 42 - 60 VAC, 1 AMP AUX ELECTRICAL CONTACTS: 600 VAC, 10 AMP 5. ENVIRONMENTAL: OPERATING TEMPERATURE RATING: -40°C TO 75°C NON-OPERATING/STORAGE TEMPERTURE RATING: -40°C TO 85°C HUMIDITY: <95 RH (AT 40°C) 1.575 40.01 1.140 28.96 SQ. 6. OPTICAL: WAVELENGTH: 1250nm - 1625nm INSERTION LOSS: 0.8dB TYPICAL, 1.5dB MAX RETURN LOSS: > -45dB, -50dB TYPICAL .906 23.00 SQ. .682 17.33 7. REPLACEMENT KITS: CONTACT KIT: 7760-000-00702Z 8. CABLE PREPARATION AND STRIPPING PROCEDURE: CAP-7763-E00-F1101. 9. RED LDPE DUST CAP INCLUDED (NOT SHOWN) 10. CRIMP TOOLING: FOR FACTORY APPLICATION USE HAND TOOL KTH-1000 AND DIE KTH-2035 FOR FIELD APPLICATION U 1.140 28.96 SQ. USE HAND TOOL KTH-5000 AND DIE KTH-5018 .905 22.99 11. ELECTRICAL AND OPTICAL CONTACTS INCLUDED .906 23.00 4X .135 3.43 .708 17.98 5/8" [15.88] ACROSS FLATS MARK: KINGS 7763-E00 .453 11.51 .906 23.00 CATALOG P/N: 7763-E00-F1101P +.10 .913+.004 -.000 23.19 .00 4X +.10 .126+.004 -.000 3.20 .00 MOUNTING HOLE PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] .XXXX [X.XXX] ± .XXXX ANGLES: ± 2° SCALE: 3:2 CUSTOMER SALES DRAWING DRAWN KC APPROVED JCF DMF029 B DATE APPROVED 4/1/13 JCF DATE APPROVED 02/01/11 XXX Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 THIRD ANGLE DATE 4/15/13 DATE XX/XX/XX EXPANDED BEAM PANEL MOUNT FIBER TRILOC JACK A SD7763-E00-F1101P SHT OF 1 1 01 REV