Certified Automation Equipment - Poster

Hazardous and Marine Certifications for Oil & Gas Industry: Industrial Automation
Not all part numbers within a product family may be certified to these standards. Additional certifications are available and certification status may
change without notification. Visit the Siemens Industry Online Support Certification page at https://support.automation.siemens.com for information
related to the latest certifications by part number.
Product
Family 2)
Description
Degree of
Protection
Operating Vibration
3)
Operating Shock
4)
Relative Humidity
5)
Operating
Temperature 6)
Transport
and Storage
Temperature
-20 … +60°C
horizontal mounting
-20 … +50°C
vertical mounting
-40 … +70°C
Hazardous Certifications 1) 7)
Marine Certifications 1) 7)
Class 1,
Div 2
ABS American BV Bureau of Bureau
Shipping Veritas
Class 1,
Div 2
Class 1,
Div 2
Class 1,
Div 2
Class 1,
Div 2
ATEX
Zone 1
ATEX
Zone 2
IECEx
Zone 1
IECEx
Zone 2
DNV Det
Norske
Veritas
Other Notable Certifications 1) 7)
GL Germanischer
Lloyd
LRS Lloyd’s
Register of
Shipping
NK Nippon
Kaiji
Kyokai
Modular Controllers
SIMATIC S7-1200
SIPLUS S7-1200
SIMATIC S7-1500
SIPLUS S7-1500
The SIMATIC S7-1200 controller is for simple but highly precise automation tasks. It is modular and
compact, versatile, a secure investment, and is powerfully fit for a full range of applications. A scalable and
flexible design, a communication interface that fulfills the highest standards of industrial communication,
and a full range of powerful integrated technology functions make this controller an integral part of a
complete and comprehensive automation solution.
The SIMATIC S7-1500 controller sets new standards for maximized productivity. This benefits smallseries machines as well as complex installations that place high demands on speed and deterministics.
The CPU is seamlessly integrated in the Totally Integrated Automation Portal (TIA Portal) for maximum
engineering efficiency.
IP20
IP20
SIMATIC ET200SP CPU
The SIMATIC ET 200SP controllers are “distributed controllers”, ideal for modular applications with tight
space constraints. They are basically S7-1500 controllers, in the ET 200SP form factor, that give customers
a size-optimized controller for stand alone applications and distributed control architectures.
IP20
SIPLUS ET200SP CPU
SIMATIC S7-300
SIPLUS S7-300
SIMATIC S7-400
SIPLUS S7-400
LOGO!
Logic Modules
SIPLUS LOGO!
Logic Modules
The SIMATIC S7-300 universal controller saves on installation space and features a modular design. A
wide range of modules can be used to expand the system centrally or to create decentralized structures
according to the task at hand, and facilitates a cost-effective stock of spare parts. With its impressive array
of innovations, this universal controller is an integrated system that will save you additional investment
and maintenance costs.
IP20
The SIMATIC S7-400’s superb communication capability and integrated interfaces make it ideal
for larger tasks such as the coordination of entire systems. The graded range of CPUs enables
scalable performance and the capacity for I/O periphery is virtually unlimited. The process controller
signal modules can be inserted and removed while the system is live (hot swapping), making it very
easy to expand the system or replace modules.
IP20
The LOGO! logic module is the convenient, user-friendly solution for simple open-loop and closed-loop
control tasks.
IP20 for LOGO! Base
Modules, expansion
modules, and the
LOGO! TD excluding the
TD front panel IP65 for
LOGO! TD front panel
Type of oscillation: Frequency sweeps with a rate of change of 1 octave/minute.
10 Hz ≤ f < 57 Hz, constant amplitude 0.3 mm
58 Hz ≤ f < 150 Hz, constant acceleration 1 g (mounted on DIN rail) or 2 g (mounted
in switchboard)
Duration of oscillation: 10 frequency sweeps per axis in each direction of the three
mutually perpendicular axes
Type of shock: half-sine
Severity of shock: 15 g peak value, 11 ms duration
Direction of shock: 6 shocks in each of 3 mutually
perpendicular axes
95% - non-condensing humidity
100% - Relative humidity including
condensation/frost; no commissioning under condensation conditions
-25 … +55/70°C
10 … 95 %
without condensation
0 … +60°C
horizontal mounting
0 … +40°C
vertical mounting
Type of oscillation: Frequency sweeps with a rate of change of 1 octave/minute.
5 Hz ≤ f ≤ 8.4 Hz, constant amplitude 7 mm
8.4 Hz ≤ f ≤ 150 Hz, constant acceleration 2 g
Duration of oscillation: 10 frequency sweeps per axis, along each of the 3 mutually
perpendicular axes
Type of shock: Half-sine
Shock intensity: 15 g max., duration 11 ms
Direction of shock: 3 shocks each in (+/-) direction,
along each of the 3 mutually perpendicular axes
Type of oscillation: Frequency sweeps with a rate of change of 1 octave/minute.
BA 2×RJ45: 5 Hz ≤ f ≤ 8.4 Hz, 3.5 mm constant amplitude
8.4 Hz ≤ f ≤ 150 Hz, 1 g constant acceleration BA 2×FC:
10 Hz ≤ f ≤ 60 Hz, 0.35 mm constant amplitude
60 Hz ≤ f ≤ 1000 Hz, 5 g constant acceleration
Duration of oscillation: 10 frequency sweeps per axis at each of three vertically aligned axes
10 … 95%
Type of shock: Half-sine
Shock intensity: 150 m/s2 peak value, 11 ms duration
Direction of shock: 3 shocks in each direction (+/-) at each
of three vertically aligned axes
100% – Relative humidity including
condensation/frost; no commissioning
under condensation conditions
Type of oscillation: Frequency sweeps with a rate of change of 1 octave/minute.
5 Hz ≤ f ≤ 9 Hz, constant amplitude 3.5 mm
9 Hz ≤ f ≤ 150Hz, constant acceleration 1 g
Duration of oscillation: 10 frequency sweeps per axis at each of three vertically
aligned axes
Type of shock: half-sine
Severity of shock: 15 g peak value,11 ms duration
Direction of shock: 3 shocks in each direction (+/-) at
each of three vertically aligned axes
Type of vibration: frequency sweeps with a rate of change of 1 octave/minute.
10 Hz ≤ f < 58 Hz, constant amplitude 0.075 mm
58 Hz ≤ f < 500 Hz, constant acceleration 1 g
Duration of vibration: 10 frequency sweeps per axis in each of three axes
perpendicular to each other
Type of shock: half-sine
Severity of shock: 10 g peak value, 6 ms duration
Direction of shock: 100 shocks in each of
the 3 axes arranged vertically to each other
5 ... 8.4 Hz
(constant amplitude 3.5 mm)
8.4 ... 150 Hz
(constant acceleration 1 g)
18 shocks
(half-sine wave 15g/11 ms)
100% - Relative humidity including
condensation/frost; no commissioning under condensation conditions
10 … 95 %
without condensation
100% - Relative humidity including
condensation/frost; no commissioning
under condensation conditions
95% at +25°C
-40 … +70°C
-40 … +70°C
0 … +60°C
horizontal mounting
0 … +50°C
vertical mounting
-40 … +70°C
-25/-40 … +60/70°C
0 … +60°C
horizontal mounting pos.
0 … +40°C
vertical mounting pos.
-40 … +70°C
–25 … +60/70°C
0 … +60°C
100% - Relative humidity including
condensation/frost; no commissioning under condensation conditions
0 … +60°C
From 10 to 95 % no condensation
0 … +55°C
100% - Relative humidity including
condensation/frost; no commissioning under condensation conditions
-40/-25°C … +70°C
-40 … +70°C
-40 … +70°C
PC-based Automation
Embedded Industrial PCs
SIMATIC IPC227D
Nanobox PC
The SIMATIC IPC227D is a compact and flexible embedded industrial PC. Featuring Intel Atom processors
of the latest generation E6x0, this power-optimized PC is suitable for simple control, data collection or
communication tasks. Optimized performance, extremely compact, flexible mountable and dust-protected.
IP40
10 ... 58 Hz: 0.0375 mm,
58 ... 200 Hz: 9.8 m/s2 (approx. 1 g)
150 m/s2, 30 ms (approx. 15 g) when
operated with CF /SSD
Up to 95% CF / SSD
Up to 80% HDD
0 … +50ºC
-40 … +70°C
SIMATIC IPC277D
Nanopanel PC
The SIMATIC IPC277D is a compact all-in-one panel PC based on embedded technology. Featuring Intel
Atom processors of the latest generation E6x0, this power-optimized PC is suitable for the realization of
simple control, visualization or communication tasks. Optimized performance and extremely compact with
7”/9”/12”/15”/19” touch displays.
IP65
front
10 ... 58 Hz: 0.0375 mm,
58 ... 200 Hz: 9.8 m/s2 (approx. 1 g)
50 m/s2, 30 ms (approx. 5 g) when operated
with CFSSD
Up to 80% at 25°C
no condensation
0 ... +50°C
0 ... +45°C
19” variant
-20 … +60°C
SIMATIC IPC427D
Microbox PC
The SIMATIC IPC427D offers maximum performance for complex and demanding control, data collection
or communication tasks. It supports very flexible installation, easy wiring and expansion as well as rapid
integration in existing systems. High performance, highly compact, flexibly configured.
IP20
5 ... 9 Hz: 3.5 mm,
9 ... 500 Hz: 9.8 m/s2 (approx. 1 g) when operated with CFast / SSD
150 m/s2, 11 ms (approx. 15 g) when operated with
CFast / SSD
Up to 80% at 25°C
no condensation
0 ... +50°C
-40 … +60°C
devices with HDD
-40 … +70°C
devices with
CFast or SSD
SIMATIC IPC477D
Panel PC
The SIMATIC IPC477D represents a fanless embedded Panel PC with 3rd Gen. Intel Core i7 processor for
demanding visualization and control tasks. It offers zero maintenance, flexible and easy configuration,
integration and commissioning. High performance, highly compact, flexibly configured, 12”/15”/19”/22”
touch displays and 15” key display.
IP65
front
5 ... 9 Hz: 3.5 mm,
9 ... 500 Hz: 9.8 m/s2 (approx. 1 g) when operated with CFast / SSD
50 m/s2, 30 ms (approx. 5 g) when operated with
CFast / SSD
Up to 80% at 25°C
no condensation
0 ... +50°C
-20 … +60°C
SIMATIC ET200SP
open controller
The SIMATIC ET200SP open controller a modular embedded controller system in SIMATIC ET200SP design
with the current embedded PC processor technology and operating system. The modular embedded
controller combines the advantages of the tried and trusted modular SIMATIC S7-1500 controller with
cutting-edge PC technology in one new device.
IP66
Frequency sweeps with a rate of change of 1 octave/minute.
BA 2×RJ45: 5 Hz ≤ f ≤ 8.4 Hz, 3.5 mm constant amplitude
8.4 Hz ≤ f ≤ 150 Hz, 1 g constant acceleration BA 2×FC:
10 Hz ≤ f ≤ 60 Hz, 0.35 mm constant amplitude
60 Hz ≤ f ≤ 1000 Hz, 5 g constant acceleration
Duration of oscillation: 10 frequency sweeps per axis at each of three vertically aligned axes
0 … +60°C
horizontal mounting
0 … +50°C
vertical mounting
-40 … +70°C
SIMATIC IPC347D
The SIMATIC IPC347D is the new industrial PC in 19’’ format in the low-end price segment. It is especially
suitable for applications in production, requiring greater ruggedness than office PCs. In particular, for
visualization and SCADA tasks, data collection. Management, and measurement and testing tasks, e.g.
in building and process automation, logistics and the mail order business. It is designed for continuous
24-hour use, even with high temperature, vibration, shock, and EMC conditions and features pressurized
ventilation and a dust filter. Even at ambient temperatures up to 40°C, continuous operation without loss
of power is ensured.
IP20
5% to 80% at 25° C, no condensation
5 … 40 °C
–20 … +60 °C
SIMATIC IPC547D
Rack PC, 19”, 4HU
The SIMATIC IPC547D represents a powerful industrial PC in 19” format (4U). It offers maximum
computing, system and graphics performance for high-speed processing of large volumes of data,
e.g. in the fields of industrial image processing or process visualization at ambient temperatures of
40 °C.. Maximum performance at an attractive price.
Half-sine
Shock intensity: 150 m/s2 peak value, 11 ms duration
Direction of shock: 3 shocks in each direction (+/-) at each 10 … 95%
of three vertically aligned axes
High-end Industrial PCs
SIMATIC IPC647C
Rack PC, 19”, 2HU
SIMATIC IPC847C
Rack PC, 19”, 4HU
The SIMATIC IPC647C is a rugged and extremely compact industrial PC in 19” design (2U). It is particularly
suitable for space-saving implementation of fast computing and visualization tasks, e.g. image and data
processing or industrial server applications. With a height of only 2 units and a small mounting depth,
it optimally utilizes the space in 19” standard control cabinets (from 500 mm). High performance
and functionality.
The SIMATIC IPC847C is a rugged and extremely expandable industrial PC in 19” design (4U). It offers
high investment protection thanks to outstanding long-term availability and ensures reliable operation
in particularly harsh industrial environments, e.g. with high dust, temperature and shock loads. Due
to its high computing power and PCI-Express technology, the IPC847C is the perfect platform for highperformance applications, for example in measuring systems, test bays, industrial image processing or
server applications. High performance, functionality and expandability.
Tested in accordance with IEC 60068-2-6, 10 cycles
5 to 8.4 Hz, amplitude 3.5 mm; 8.4 to 500 Hz: 9.8 m/s2
Tested in accordance with IEC 60068-2-27
Half-sine: 250 m/s2, 6 ms, 1000 shocks per axis
IP30 front, IP20 rear
20 … 58 Hz: 0.015 mm;
58 … 200 Hz: 2 m/s2 (approx. 0.2 g)
9.8 m/s2, 20 ms (approx. 1 g)
5 ... 80% at 25ºC
no condensation
5 … +40ºC with
unthrottled processor
–20 … +60 °C
IP41 front, IP20 rear
10 … 58 Hz: 0.0375 mm;
58 … 500 Hz: 5 m/s² (approx. 0.5 g)
50 m/s2, 30 ms (approx. 5 g)
5 ... 80% at 30ºC
no condensation”
5 … +50ºC with
unthrottled processor
–20 … +60 °C
IP41 front, IP20 rear
10 … 58 Hz: 0.0375 mm;
58 … 500 Hz: 5 m/s² (approx. 0.5 g)
50 m/s2, 30 ms (approx. 5 g)
5 ... 80% at 30ºC
no condensation
5 … +50ºC with
unthrottled processor
–20 … +60 °C
SIMATIC IPC627C
Box PC
The SIMATIC IPC627C impresses users with its high compactness and performance. It is suitable for
demanding measuring, open-loop and closed-loop control tasks at ambient temperatures of up to 55 °C
and can be used in shipbuilding. Maximum performance and functionality.
IP20
10 … 58 Hz, 0.075 mm;
58 … 500 Hz, 9.8 m/s2 (approx. 1 g)
50 m/s2, 30 ms (approx. 5 g)
5 ... 80% at 30ºC
no condensation
5 … +45°C
5 … +50°C with a total sum
of max. 20 W for the slots
–20 … +60 °C
5 … +55°C
with a total sum of max.
10 W for the slot
SIMATIC HMI
IPC677C Panel PC
The SIMATIC HMI IPC677C all in one Panel PCs are distinguished by their high performance, openness and
expandability. With an optional mirror drive or an integrated RAID controller, it meets high demands on
system availability for mission critical applications. The IPC677C reaches the highest level of flexibility
offering 5 optional front panels, 5 operating system options and an optional INOX variant. Maximum
performance and functionality, 12”/15”/19” touch, 12’/15” key, and 15” touch INOX displays.
IP65 front
IP66K front for INOX
touch panel
10 … 58 Hz: 0.075 mm,
58 … 500 Hz: 9.8 m/s2 (1g)
50 m/s2, 30 ms2 (5 g)
5 ... 80% at 30ºC
no condensation
5 ... +50°C
maximum configuration
–20 … +60 °C
SIMATIC IPC827C
Box PC
The SIMATIC IPC827C is a rugged and flexibly expandable control cabinet PC for machine-level use in
24-hour continuous operation at ambient temperatures of up to 55 °C. Maximum performance,
functionality and expandability.
IP20
10 … 58 Hz, 0.075 mm;
58 … 500 Hz, 9.8 m/s² (approx. 1 g)
50 m/s2, 30 ms (approx. 5 g)
5 ... 80% at 25ºC
no condensation
5 … +45°C
5 … +50°C with a total of
max. 50 W for the slots
5 … +55°C with a total of
max. 10 W for the slots
–20 … +60 °C
SIMATIC HMI
Panel PC Ex
The SIMATIC HMI Panel PC Ex can be used directly in hazardous zones 1/21 and 2/22 without the need for
special measures such as complex and expensive enclosures or additional certification processes. The units
are capable of withstanding considerable vibrations and shocks and have been certified for use in shipbuilding. 15’’ and 22’’ displays available for use in daylight conditions.
IP66 fully protected
3 ... 22 Hz: 1 mm, 22 ... 500 Hz: 9.8 m/s² (1g)
150 m/s² (approx. 15g), 11 ms
90% at 40°C
no condensation
-40 ... 65°C
–20 … +60 °C
SIMATIC HMI
Thin Client Ex
The SIMATIC HMI Thin Client Ex can be used directly in hazardous zones 1/21 and 2/22 without the need
for special measures such as complex and expensive enclosures or additional certification processes. The
units are capable of withstanding considerable vibrations and shocks and have been certified for use in
ship-building. 15’’ and 22’’ displays available for use in daylight conditions
IP66 fully protected
3 ... 22 Hz: 1 mm, 22 ... 500 Hz: 9.8 m/s² (1g)
150 m/s² (approx. 15g), 11 ms
90% at 40°C
no condensation
-40 ... 65°C
–20 … +60 °C
SIMATIC HMI
IPC477C PRO
The SIMATIC HMI IPC477C is designed to work without a fan and hard drive and is very service- friendly and
almost maintenance free. The operating system Windows Embedded Standard 2009 is installed on a CF
card and offers the openness of a PC. At the same time, it ensures the robustness of an embedded system.
15 or 19 inch touch display.
IP66 front
10 …58 Hz 0.0375 mm
58 … 200 Hz: 1 g on the supporting arm, 0.5 g with basic adapter; 10 Sweeps per axis
50 m/s² (5 g), 30 ms
5 … 85% at 25°C
no condensation
15” device: 0 ... +45°C
19” device: 0 ... +45°C
–20 … +60 °C
SIMATIC Flat Panel
Monitors PRO
The SIMATIC Flat Panel Monitor PRO is used wherever the operator unit and the computer unit have to be
set up separately from each other. It is optimally suited for applications in harsh industrial environments.
The monitor features the highest image quality – brightness, contrast or sharpness – as well as a wide
reading angle allow for improved operating comfort. In the fully protected version. 15”/19” touch displays.
10 … 58 Hz: 0.0375 mm, 58 … 200 Hz: 9.8 m/s² (1g)
5 g, 30 ms, 3 shocks per direction
5 … 80% at 25°C
no condensation
5 ... +45°C
–20 … +60 °C
SIMATIC Industrial
Thin Client
SIMATIC Industrial Thin Clients are remote operator terminals with touch functionality for combination
with a host (e.g. SIMATIC Panel PC or a server). 12”/15”/19”/22” touch widescreen displays. For one or
more operator stations, any distance apart over Industrial Ethernet. Fast response times.
10 … 58 Hz: 0.0375 mm, 58 … 200 Hz: 9.8 m/s² (1g)
50 m/s² (5 g), 30 ms
5 … 80% at 25°C
no condensation
0 ... 45/50 °C
–20 … +60 °C
SIMATIC Industrial
Flat Panel
The SIMATIC Industrial Flat Panel is for practical gesture and multi-touch operation and is the first industrial
monitor with projected capacitive touch technology (PCT). The PCT technology enables efficient and fast
operation, even when wearing thin protective gloves. The device with 19 inch widescreen display responds
to gestures and operator actions with up to five fingers simultaneously. 15”/19”/22” touch, 15” key displays.
For small-scale separated solutions over a distance of up to 30 meters. For cost-optimized and versatile
client-server architectures.
10 … 58 Hz: 0.0375 mm, 58 … 200 Hz: 9.8 m/s² (1g)
150 m/s2, 11 ms (approx. 15 g)
95% at 25°C
no condensation
0 ... 45/50 °C
–20 … +60 °C
SIMATIC ET 200AL
SIMATIC ET 200AL - the rugged I/O for effortless mounting anywhere
With its high degree of protection IP65/67, particularly compact design, low space requirements and weight,
SIMATIC ET 200AL is specially designed for distributed control electronics in tight spaces and involving
IP65/66/67
motion. The SIMATIC ET 200AL devices are quickly and conveniently configured and commissioned using
the TIA Portal. The modules can be incorporated in the automation network via PROFINET, PROFIBUS or the
integration of ET 200SP.
Type of vibration: Frequency sweeps at a rate of change of 1 octave/minute.
5 Hz to 9.1 Hz, constant amplitude 15 mm
9.1 Hz to 150 Hz, constant acceleration 5 g
Duration of vibration: 10 frequency sweeps per axis in each of 3 perpendicular axes
Type of shock: half-sine Shock intensity: 15 g peak value,
18 ms duration
5 … 100% with condensation
Direction of shock: 3 shock tests in +/- direction in each of
the 3 perpendicular axes
-25ºC to +55ºC for all
installation positions
-40 … +70°C
The SIMATIC ET 200SP distributed I/O system is a scalable and highly flexible system for connecting
process signals to a central controller via PROFINET. It is easy to operate and its compact design achieves
maximum economy in the control cabinet. Its high speed and transmission rate ensure significantly
greater performance than conventional systems.
Type of oscillation: Frequency sweeps with a rate of change of 1 octave/minute.
BA 2×RJ45:
5 Hz ≤ f ≤ 8.4 Hz, 3.5 mm constant amplitude
8.4 Hz ≤ f ≤ 150 Hz, 1 g constant acceleration BA 2×FC:
10 Hz ≤ f ≤ 60 Hz, 0.35 mm constant amplitude
60 Hz ≤ f ≤ 1000 Hz, 5 g constant acceleration
Duration of oscillation: 10 frequency sweeps per axis at each of three vertically aligned axes
10 … 95%
Type of shock: Half-sine
Shock intensity: 150 m/s2 peak value, 11 ms duration
Direction of shock: 3 shocks in each direction (+/-) at each
100% - Relative humidity including
of three vertically aligned axes
condensation/frost; no commissioning under condensation conditions
Distributed Operator Control and Monitoring
IP65 rear
IP65 all-round,
enclosure type 4
optional optional optional optional optional
IP65 front
IP20 rear
enclosure type 4
on the front
IP65 front
IP20 rear
enclosure type 4
on the front
Distributed I/O
SIMATIC ET 200SP
SIPLUS ET 200SP
SIMATIC ET 200S
SIPLUS ET 200S
SIMATIC ET 200MP
SIPLUS ET 200MP
SIMATIC ET 200M
SIPLUS ET 200M
IP20
The SIMATIC ET 200S is the multi-functional, highly modular I/O system that can be exactly tailored to the
automation task. Interface modules with integrated CPU and PROFINET/ PROFIBUS connection are available –
both in standard and safety-oriented designs. The bit-modular ET 200S offers a comprehensive module range,
IP20
it comprises power modules, digital or analog input and output modules, technology modules, an IO-Link
Master as well as motor starters or a pneumatic interface. With its rugged construction, the ET 200S can also
be used under conditions of high mechanical stress.
The SIMATIC ET 200MP I/O system is scalable and is used both as centralized I/O and in distributed
configurations with PROFINET. Each station can accommodate up to 30 I/O modules. The modules have
low parts variance and the front connector for all 35-mm wide modules. As a result, ordering, logistics
and spare-parts inventory are considerably simplified.
The SIMATIC ET 200M is the modular I/O station for the control cabinet with high density-channel
applications. Connection to PROFIBUS and PROFINET is achieved using interface modules – optionally
for PROFIBUS also using fiber optic cables. The ET 200M can be used for standard as well as failsafe
applications. Up to 12 multi-channel signal modules (e.g. 64 digital inputs) and function modules as
well as S7-300 communications processors can be used as I/O modules – the interface to the process.
ET 200M supports modules with expanded user data, e.g. HART modules with HART minor variables.
IP20
IP20
95% - non-condensing humidity
DIN rail mount: 3.5 mm from 5-9 Hz, 1G from 9 to 150 Hz
Panel Mount: 7.0 mm from 5-9 Hz, 2G from 9 to 150 Hz 10 sweeps each axis,
1 octave per minute
Type of oscillation: Frequency sweeps with a rate of change of 1 octave/minute.
5 Hz ≤ f ≤ 9 Hz, constant amplitude 7.5 mm
9 Hz ≤ f ≤ 150 Hz, constant acceleration 2 g
Duration of oscillation: 10 frequency sweeps per axis, along each of the three mutually
perpendicular axes
IEC 68, Part 2 – 6:
10 - 57 Hz (constant amplitude 0.075 mm) 57 - 150 Hz (constant acceleration 1 g)
15 G, 11 ms pulse, 6 shocks in each of 3 axis
Type of shock: Half-sine
Shock intensity: 15 g max., duration 11 ms
Direction of shock: 3 shocks each in (+/-) direction,
along each of the 3 mutually perpendicular axes
IEC 68, Part 2 - 27
Half sine, 15 g, 11 ms
0 … +60°C
horizontal mounting
0 … +50°C
vertical mounting
-40 … +70°C
-40 … +70°C
0 … +60 °C
horizontal mounting
0 … +50°C
vertical mounting
100% - Relative humidity including
condensation/frost; no commissioning
under condensation conditions
-25/-40 … +60/70°C
10 … 95%
0 … +60°C
horizontal mounting
0 … +40°C
vertical mounting
5 … 95%
0 … +60°C
horizontal mounting
0 … +40 °C
vertical mounting
100% – Relative humidity including
condensation/frost; no commissioning
under condensation conditions
-25/-40 … +60/70°C
-40 … +70°C
-40 … +70°C
-40 … +70°C
IP30
Type of oscillation: Frequency sweep with a rate of change of 1 octave/minute.
5 Hz ≤ f ≤ 9 Hz, constant amplitude of 3.5 mm
9 Hz ≤ f ≤ 150 Hz, constant acceleration 1 g
Duration of oscillation: 10 frequency sweeps per axis in each of the 3 mutually vertical axes
Type of shock: half-sine
Shock intensity: 15 g peak value, 11 ms duration
Shock direction: 3 shocks each in +/- direction in each
of the 3 mutually vertical axes
5 … 95%
without condensation
-20 … +70°C
horizontal installation
-20 … +50°C
all other mounting
positions
-40 … +70°C
IP65/66/67
Type of vibration: Frequency sweeps with a rate of change of 1 octave/minute.
5 Hz ≤ f ≤ 12 Hz, constant amplitude 15 mm
12 Hz ≤ f ≤ 150 Hz, constant acceleration 10 g
Duration of vibration: 10 frequency sweeps per axis in each of three perpendicular axes
Type of shock: half-sine
Shock intensity: 30 g peak value, 18 ms duration
Direction of shock: 3 shock tests in +/- direction in each
of the 3 perpendicular axes
5 … 100%
with condensation
0 … +55°C
-40 … +70°C
SIMATIC ET 200ecoPN
The SIMATIC ET 200eco PN is a compact block IO with PROFINET connection for cabinet-free installation
directly on the machine. The ET 200eco PN is mechanically very rugged and resistant to vibrations, dust, oil,
or humidity. It can be flexibly expanded via PROFINET and supports both star and line topologies within a
IP65/66/67
system and enables users to profit from an integrated diagnostics concept and from the high performance
of PROFINET. An an I/O Link master module is available.
Type of vibration: Frequency sweeps at a rate of change of 1 octave/minute.
10 Hz ≤ f ≤ 58 Hz, constant amplitude 3 mm
58 Hz ≤ f ≤ 150 Hz, constant acceleration 40 g
5 Hz ≤ f ≤ 12 Hz, constant amplitude 15 mm
12 Hz ≤ f ≤ 150 Hz, constant acceleration 10 g
Duration of vibration: 10 frequency sweeps per axis in each of three perpendicular axes
Type of shock: Half-sine
Shock intensity: 30 g peak value, 18 ms duration
Direction of shock: 3 shocks in each +/- direction at each
of the three vertically aligned axes
5 … 100%
with condensation
-40 ... + 60
-40 … +70°C
SIMATIC ET 200eco
The SIMATIC ET 200eco has a compact, rugged enclosure and is very easy to use. It can be connected to
PROFIBUS DP at up to 12 Mbit/s.
IP65/66/67
Type of vibration: Frequency sweeps at a rate of change of 1 octave/minute.
10 Hz ≤ f ≤ 58 Hz, constant amplitude 0.75 mm
58 Hz ≤ f ≤ 150 Hz, constant acceleration 10 g
Duration of vibration: 10 frequency sweeps per axis in each of three perpendicular axes
Shock method: half-sine
Strength of shock: 30 g peak value, 18 ms duration
Direction of shock: 3 shocks in each +/- direction at each
of the three vertically aligned axes
15 … 95%
without condensation
0 … +55°C
-40 … +70°C
IP65, NEMA 4x front
if mounted IP 20 rear
Type of vibration: Transitional rate of the frequency: 1 octave/minute.
10 Hz ≤ f ≤ 58 Hz, constant amplitude of 0.075 mm
58 Hz ≤ f ≤ 150 Hz, constant acceleration 1 g
Vibration duration: 10 frequency cycles per axis at each of the three
associated vertical axes
10 … 90%
without condensation
0 … +50°C vertical
mounting
0 … +40°C mounting
at an angle
Slope angle max. 35°
–20 … +60°C
SIMATIC ET 200iSP
The SIMATIC ET 200iSP distributed I/O system is the economical solution for areas subject to explosion
hazards. The intrinsically safe, modular I/O station is particularly flexible and requires minimum
engineering, installation and cabling overhead.
SIMATIC ET 200pro
The SIMATIC ET 200pro is an especially small, extremely rugged and high-performance I/O system. It
comprises Interface Modules to connect with PROFIBUS or PROFINET environment with standard as well
as failsafe functionality. In addition to proven wired connection you can also choose the ET 200pro
IWLAN variant for wireless connection to the I/O controller. Interface modules are also available with
CPU functionality. Due to its rugged design the ET200 pro can be used when mechanical load is high.
Hot swapping of electronics and terminal modules during operation increases plant availability.
SIMATIC HMI Panels
SIMATIC HMI
Basic Panels
SIPLUS HMI
Basic Panels
SIMATIC HMI
Comfort Panels
SIPLUS HMI
Comfort Panels
SIMATIC HMI Basic Panels offer cost-effective operation and monitoring with 3", 4”, 6” and 10” displays,
keypad or touch controls, and a 15” touch device. They are designed with the IP65 protection class and
are ideal for simple visualization tasks – even in harsh environments. Additional advantages include
integrated software functions such as a reporting system, recipe management, or graph functions.
SIMATIC HMI Comfort Panels are high-end operator devices for sophisticated HMI applications. With
high-resolution widescreen displays from 4” to 22”, optionally available with touch operation or control
keys, they can be optimally adapted to any application. One of the numerous innovations is the capability
of coordinating and centrally shutting down the device displays via PROFIenergy during break times in
order to reduce energy consumption.
IP65,
NEMA 4x front
if mounted
IP20 rear
Type of vibration: Frequency cycles at a rate of change of 1 octave/minute.
5 Hz ≤ f ≤ 8.4 Hz, constant amplitude 0.075 mm
8.4 Hz ≤ f ≤ 150 Hz, constant acceleration 1 g
Vibration duration: 10 frequency cycles per axis in each of the three
mutually vertical axes
Type of shock: Half-sine
Shock intensity: Peak value 15 g, duration 11 ms
Direction of impact: 3 shocks in ± direction at each one
of the three associated vertical axes
Type of shock: Half-sine
Severity of shock: Peak value 15 g, duration 11 ms
Direction of shock: 3 shocks in ± direction of axis in
each of the three axes vertical to each other
100% - Relative humidity including
condensation/frost; no commissioning under condensation conditions
0/-10/-25 … +50/60°C
10 … 90%
without condensation
Vertical mounting:
0 … +45/50°C (horizontal)
0 … +40°C (vertical)
Mounting at an angle:
0 … +40 °C (horizontal)
0 … +35°C (vertical)
Slope angle max. 35°
100% - Relative humidity including
condensation/frost; no commissioning under condensation conditions
0 … +50°C
–20 … +60°C
SIMATIC MP377 15”
Touchdaylight
readable (DLR)
The SIMATIC MP377 Multi-Panel is for control stations and outdoor applications in hazardous areas. The
panel includes a daylight-readable and dimmable display, making it ideal for use in control stations, e.g.
for drill pipes (oil & gas industry), ships (in shipbuilding), and other areas without shading, all the way to
outdoor applications with the optional Temperature Extension Kit (TEK).
IP20
Type of vibration: Transitional rate of the frequency: 1 octave/minute.
10 Hz ≤ f ≤ 58 Hz, constant amplitude 0.075 mm
58 Hz ≤ f ≤ 150 Hz, constant acceleration 1 g
Vibration duration: 10 frequency cycles per axis in each of the three mutually vertical axes
Type of shock: Half-sine
Shock intensity: Peak value 15 g, duration 11 ms
Direction of impact: 3 shocks in ± direction at each
one of the three associated vertical axes
10 … 90 %
–30 … +70°C
– 40 … +80°C
SIMATIC Mobile Panel
277 IWLAN Version 2
The SIMATIC Mobile Panel is a wireless 8 inch handheld panel with TFT color display and combined touch
and key operation. It is for HMI tasks of medium complexity for wireless use in PROFINET environments.
The F-variant offers certified safety functionality and Rapid Roaming.
IP65
Type of vibration: Transitional rate of the frequency: 1 octave/minute.
5 Hz ≤ f ≤ 8.4 Hz, constant amplitude 3.5 mm
8.4 Hz ≤ f ≤ 150 Hz, constant acceleration 1 g
Vibration duration: 10 frequency cycles per axis in each of the three mutually vertical axes
Type of shock: Half-sine
Shock intensity: Peak value 30 g, duration 11 ms
Direction of impact: 3 shocks in ± direction at each
one of the three associated vertical axes
80%
0 … +40°C
–20 … +60°C
-20 ... +70°C
EN 60068-2-27 shock, test Ea
– Acceleration 150 m/s2, test duration 11 ms
5 … 85%
no condensation
IP20
EN 60068-2-6 Vibration, test Fc:
0.075 mm deflection in the range 10...58 Hz
1 g acceleration in the range 58...150 Hz
100% - Relative humidity including
condensation/frost; no commissioning under condensation conditions
-25 … +70°C
Power Supplies
SITOP Power Supplies
SITOP
LOGO!Power
SIPLUS
LOGO!Power
SITOP Compact
SITOP Lite
SITOP Smart
SIPLUS Smart
SITOP Modular
SIPLUS Modular
The SITOP LOGO! Power family offers a range of flat power supplies for distribution boards. These
miniature units provide great performance in a small space. The efficiency has been improved
throughout the entire load range and the power loss in no-load operation has been halved. The wide
input voltage range now also allows operation on DC voltage, the switch-on response has been
optimized for capacitive loads, and the operating temperature range has been extended to +70 °C.
The SITOP Compact is a slim power supply unit for control boxes. Due to the extremely space-saving
slim design, this power supply series for the lower performance range is especially suited to distributed
applications in control boxes or in small control cabinets. The power supplies are characterized by their
low power loss over the entire load range. Power loss is extremely low even during no-load operation,
which is why they are ideal for supplying machinery and equipment that are often in stand-by mode.
SITOP Lite is a cost-effective basic power supply, designed for standard requirements in industrial
environments. The wide-range input with manual switchover supports connection to a wide range of
1-phase supply systems. Due to its narrow width, the primary switched-mode regulators require little
space on the DIN rail and can be easily integrated. Low thermal losses in the control cabinet. Short-circuit
and overload protection as well as UL approval for export ensure problem-free use.
SITOP Smart is the optimal power supply for many standard applications on 12 V DC or 24 V networks.
Whether 1-phase or 3-phase, they are compact, powerful and low priced. They offer outstanding overload
characteristics. Due to the extra power feature, providing 1.5 times the rated current for 5 seconds, even
large loads can be switched on without any problems. With a continuous rated capacity of 120%, the slim
power supplies are among the most reliable of their kind. Numerous certifications facilitate universal and
global use as well as use in hazardous areas.
SITOP Modular meets the highest requirements for functionality for use in complex plants and machines.
The wide-range input enables connection to any system in the world and reliably guarantees a high level
of safety even in the event of large voltage fluctuations. The power boost function briefly supplies up to
three times the rated current. In the case of an overload, you can choose between constant current with
automatic restart, or latching shutdown.
IP20
IP20
IP20
IP20
-40...+85°C
EN 60068-2-6 Vibration, test Fc:
0.075 mm deflection in the range 10...58 Hz
1 g acceleration in the range 58...150 Hz
EN 60068-2-27 shock, test Ea:
- Acceleration 150 m/s2, test duration 11 ms
5 … 85%
no condensation
-20 ... +70°C
-40...+85°C
EN 60068-2-6 Vibration, test Fc:
0.075 mm deflection in the range 10...58 Hz
1 g acceleration in the range 58...150 Hz
EN 60068-2-27 shock, test Ea:
acceleration 150 m/s2 , test duration 11 ms
5 … 85%
no condensation
0 ... +45°C
-40...+85°C
EN 60068-2-6 Vibration, test Fc:
0.075 mm deflection in the range 10...58 Hz
1 g acceleration in the range 58...150 Hz
5 … 85%
no condensation
-10/0 ... +70°C
EN 60068-2-27 shock, test Ea:
acceleration 150 m/s2, test duration 11 ms
100% - Relative humidity including
condensation/frost; no commissioning under condensation conditions
0 ... +60°C
5 … 85%
no condensation
0 ... +60/70°C
with natural convection
100% - Relative humidity including
condensation/frost; no commissioning under condensation conditions
0/-25/-40 … +60/70°
5 … 95%
no condensation
0 … +60°C
100% - Relative humidity including
condensation/frost; no commissioning under condensation conditions
0 … +60°C
-25 ... +70°C
EN 60068-2-6 Vibration, test Fc:
0.075 mm deflection in the range 10 – 58 Hz
1 g acceleration in the range 58 – 150 Hz
EN 60068-2-27 shock, test Ea:
acceleration 150 m/s2, test duration 11 ms
EN 60068-2-6 Vibration, test Fc:
0.075 mm deflection in the range 10...58 Hz
1 g acceleration in the range 58...150 H
Type of shock: half-sine
Severity of shock: 15 g peak value, 11 ms duration
Direction of shock: 6 shocks in each of 3 mutually
perpendicular axes
-40...+85°C
-40...+85°C
SITOP Power Supplies in SIMATIC Design
SIMATIC Design
S7-1200
SIPLUS Design
S7-1200
1)
7)
The SITOP Design S7-1200 is a 70mm compact power supply used in conjunction with the SIMATIC S7-1200
PLC. The automatic area switchover function of the DIN rail-mounted power supply unit 24 V DC/ 2.5 A
IP20
ensures problem-free connection to 1-phase networks 120/230 V AC in industrial and residential areas. It
can be mounted on DIN-rail or via screws.
Additional certifications are available, as noted on the Siemens Industry Online Support Certification page at https://support.automation.siemens.com. 2) Not all Siemens products are listed here. Please visit www.usa.siemens.com/automation to view our full product and software offerings.
Not all part numbers within a product family may be certified to these standards. Certification status may change without notification. It is the user’s responsibility to determine applicable certifications by referring to the ratings marked on the product. 3)
Vibration during operation. Tested in accordance with: IEC 60068-2-6.
4) Shock
-25 … +85°C
during operation. Tested to: IEC 60068-2-2.
5)
Tested to DIN IEC 60068-2-78, DIN IEC 60068-2-30, -60068-2-56.
6)
Ambient temperature during operations. At full processor capacity (without throttling).
optional
PRS Polski
Rejestr
Statkow
RINA Registro
Italiano
Navale
RMRS Russian
Maritime
Register of CE
Shipping
approval
UL
certification
CSA
approval
cULus
approval
C-Tick
approval
IEC
61131
Korea
certification
GOST-R
UL
INMETRO CNEX
CKT
Product
Family 2)
Degree of
Protection
Operating
Temperature 6)
Transport
and Storage
Temperature
10 … 95%
no condensation
0 … +60°C
-40 … +85°C
Type of shock: half-sine
Severity of shock: 15 g peak value, 11 ms duration
Direction of shock: 3 shocks in each direction (+/-) at
each of three vertically aligned axes
10 … 95%
transient condensation permitted
-25 … +70°C
-40 ... +85°C
EN 60068-2-6 Vibration, test Fc:
0.075 mm deflection in the range 10...58 Hz
1 g acceleration in the range 58...150 Hz
Type of shock: Half-sine
Shock intensity: 15 g max., duration 11 ms
Direction of shock: 3 shocks each in (+/-) direction, along
each of the 3 mutually perpendicular axes
5 … 95% no condensation
0 … +40/60°C
-40 ... +85°C
EN 60068-2-6 Vibration, test Fc:
0.075 mm deflection in the range 10...58 Hz
1 g acceleration in the range 58...150 Hz
5 … 85% no condensation
-20 ... +70°C
EN 60068-2-27 shock, test Ea
Acceleration 150 m/s2, test duration 11 ms
100% - Relative humidity including
condensation/frost; no commissioning under condensation conditions
-25 … +70°C
5 … 85% no condensation
0 … +60°C
+ 95% no condensation
-15 … +50°C
100% - Relative humidity including
condensation/frost; no commissioning under condensation conditions
-15 … +50 °C/-25 ... +70 °C
5 … 85% no condensation
-15 … +50 °C
5 … 85% no condensation
0 ... +60 °C
with natural convection
100% - Relative humidity including
condensation/frost; no commissioning under condensation conditions
0/-25 … +60/70°C
Operating Vibration 3)
Operating Shock 4)
Relative Humidity 5)
The SITOP Design S7-300 power supply is used in conjunction with the SIMATIC S7-300 PLC. It requires
very little space on the S7 rail and range switching to single-phase 120/ 230 V AC systems now takes place
IP20
automatically. The connecting comb to the CPU is included in the scope of supply. An optional adapter
allows the unit to be snapped onto DIN mounting rails.
EN 60068-2-6 Vibration, test Fc:
0.075 mm deflection in the range 10...58 Hz
1 g acceleration in the range 58...150 Hz
Type of shock: half-sine
Severity of shock: 15 g peak value, 11 ms duration
Direction of shock: 3 shocks in each direction (+/-) at
each of three vertically aligned axes
SIMATIC Design
S7-300 Outdoor
The SITOP Design S7-300 PLC is used in conjunction with the SIMATIC S7-300 Outdoor PLC. The 2 A and
5 A devices can easily handle temperatures between –25 °C and +70 °C as well as higher vibration and
shock loads.
IP20
EN 60068-2-6 Vibration, test Fc:
0.075 mm deflection in the range 10...58 Hz
1 g acceleration in the range 58...150 Hz
SIMATIC Design
S7-1500
The SITOP Design S7-1500 is used in conjunction with the SIMATIC S7-1500 PLC. It features conversion
of AC or DC line voltages to the operating voltages required for the internal electronics with 25 or 60 W
output power.
IP20
The SITOP LOGO!Power offers flat power supply for distribution boards. These miniature units provide
great performance in a small space. The efficiency has been improved throughout the entire load range
and the power loss in no-load operation has been halved. The wide input voltage range now also allows
operation on DC voltage, the switch-on response has been optimized for capacitive loads, and the
operating temperature range has been extended to +70 °C.
IP20
Description
Hazardous Certifications 1) 7)
Marine Certifications 1) 7)
Class 1,
Div 2
ABS American BV Bureau of Bureau
Shipping Veritas
Class 1,
Div 2
Class 1,
Div 2
Class 1,
Div 2
Class 1,
Div 2
ATEX
Zone 1
ATEX
Zone 2
IECEx
Zone 1
IECEx
Zone 2
DNV Det
Norske
Veritas
Power Supplies (continued)
SITOP Power Supplies in SIMATIC Design
SIMATIC Design
S7-300
SIPLUS Design
S7-300
SIMATIC Design
LOGO!Power
SIPLUS Design
LOGO!Power
-40 … +85°C
DC UPS, Uninterruptible Power Supplies
DC UPS with Capacitors offer uninterruptible power supply 24 V DC UPS with highly capacitive double-layer
capacitors. They offer completely maintenance-free capacitors with a long service life. After 8 years, even
at 50 °C, they still have more than 80% of their capacity, meaning that the energy storage unit does not have
IP20
to be replaced. Since the capacitors do not emit any gas, the control cabinet does not have to be ventilated.
A further advantage is the significantly shorter charge times required for the double-layer capacitors which
ensure a fast buffer readiness after a power failure.
SITOP DC UPS with Battery Modules offer uninterruptible power supply with battery modules. They are
compact and communicative. The DC UPS module is the optimal expansion to all SITOP 24 V power
supplies if you cannot afford DC-UPS long power failures. Load currents of up to 40 A can be maintained
via externally connected lead-acid storage batteries from 1.2 to 12 Ah. The transition to buffer operation
IP20
is absolutely uninterrupted. Extensive protection and monitoring functions are integrated as standard in
the DC UPS module to protect your processes, for example monitoring the availability, battery cable, aging
status and charge status. For easy integration, the modules are equipped with different communication
interfaces, now featuring PROFINET for easy integration into TIA Portal.
DC UPS with
Capacitors
SITOP DC UPS with
Battery Back-Up
SIPLUS DC UPS with
Battery Back-Up
SITOP Battery Modules
EN 60068-2-6 Vibration, test Fc:
0.075 mm deflection in the range 10...58 Hz
1 g acceleration in the range 58...150 Hz
EN 60068-2-27 shock, test Ea:
acceleration 150 m/s2 , test duration 11 ms
EN 60068-2-6 Vibration, test Fc:
0.075 mm deflection in the range 10...58 Hz
1 g acceleration in the range 58...150 Hz
EN 60068-2-27 shock, test Ea:
acceleration 150 m/s2 , test duration 11 ms
IP00
EN 60068-2-6 Vibration, test Fc:
0.075/3.5 mm deflection in the range 10...58/5-9 Hz
1 g acceleration in the range 58...150/ 9-150 Hz
EN 60068-2-27 shock, test Ea:
acceleration 150 m/s2 , test duration 11 ms
IP20
EN 60068-2-6 Vibration, test Fc:
0.075 mm deflection in the range 10...58 Hz
1 g acceleration in the range 58...150 Hz
EN 60068-2-27 shock, test Ea:
acceleration 150 m/s2 , test duration 11 ms
The SITOP Redundancy Module is for applications that cannot tolerate a 24 V power failure. Using diodes,
the add-on module disconnects two parallel SITOP power supplies, protecting against worst-case scenarios.
Should one defective power supply affect another working power pack, the redundancy module guards
IP20
against total loss of power. Failure of a single defective power supply no longer compromises safe and
uninterrupted supply of 24 Volt power to your application.
EN 60068-2-6 Vibration, test Fc:
0.075 mm deflection in the range 10...58 Hz
1 g acceleration in the range 58...150 Hz
EN 60068-2-27 shock, test Ea:
acceleration 150 m/s2 , test duration 11 ms
The SITOP Modular Buffer Module reliably provides an up to 10 second buffer, enabling machines and
systems to continue running without interruption despite a power failure. Connection to the basic
model is so easy with just two cables and DIN rail mounting anywhere in the switching cabinet is just
as simple.
IP20
EN 60068-2-6 Vibration, test Fc:
0.075 mm deflection in the range 10...58 Hz
1 g acceleration in the range 58...150 Hz
EN 60068-2-27 shock, test Ea:
acceleration 150 m/s2 , test duration 11 ms
The SITOP Electronic Diagnostic Modules are an ideal extension of your 24 VDC switched mode power
supply for distribution and monitoring the load current over several circuits. The units effectively detects
and isolates overloads and short circuits and provides feedback of the faulty circuit via a common
signaling contact and LED indication on the front of the device.
IP20
EN 60068-2-6 Vibration, test Fc:
0.075 mm deflection in the range 10...58 Hz
1 g acceleration in the range 58...150 Hz
40 m/s²
1.2 Ah, 2.5 Ah, 3.2 Ah, 7 Ah, and 12 Ah
-40 … +70°C
‑20 … +50°
-20 … +50 °C
SITOP Expansion Modules
SITOP Modular
Signaling Module
The SITOP Modular Signaling Module is used for optimal integration of the power supply into the total
system. Floating signal contacts signal the status of the unit which can be then evaluated by a controller.
The power supply can be turned on/off remotely with a signal input. Installation is easy - just insert the
signal module in the basic device and screw it tight.
SIPLUS
Signaling Module
SITOP Redundancy
Module
SIPLUS Redundancy
Module
SITOP Modular
Buffer Module
SIPLUS Modular
Buffer Module
Electronic Diagnostic
Module
-25 ... +85°C
5 … 85% no condensation
-20 ... +70°C
100% - Relative humidity including
condensation/frost; no commissioning under condensation conditions
0 ... +60°C
-40 ... +70°C
-40 ... +85°C
5 … 85% no condensation
0 … +60°C
100% - Relative humidity including
condensation/frost; no commissioning under condensation conditions
-25 ... +70°C
EN 60068-2-27 shock, test Ea:
acceleration 150 m/s2 , test duration 11 ms
5 … 85% no condensation
0 … +60°C
150 m/s², 10 ms
100%, condensing for OLMG1x-EEC
<95%, non condensing for all other OLMs
-25/0...+60°C
-40 ... +70°C
< 90% no condensation
0 … +55°C
-40 … +70°C
‹ 95% no condensation
0 … +60°C
-40 … +70°C
-25 ... +85°C
PROFIBUS Optical Link Module
SIMATIC NET
PROFIBUS Optical Link
Module (OLM)
SIMATIC Net PROFIBUS OLMs are designed for use in optical PROFIBUS fieldbus networks. They allow the
conversion of electrical PROFIBUS interfaces (RS-485 level) into optical PROFIBUS interfaces and vice versa.
The modules can be integrated in existing PROFIBUS fieldbus networks with the known advantages of
IP40
optical transmission technology. A complete PROFIBUS fieldbus network can also be set up with modules
in a linear (bus), star or ring topology as well as any combination of these topologies.
Industrial Ethernet Switches
Compact Switch Modules
For LOGO!
Logic Modules,
unmanaged
The LOGO! Compact with Module is an Industrial Ethernet switch in compact, modular design for use
with the SIMATIC LOGO! PLC. The ethernet interface of the PLC can be multiplied to enable simultaneous
communication with control and programming devices, other controllers, or the office world. Problemfree external access (for diagnostics purposes, for example) is possible via the four Ethernet ports.
For SIMATIC
S7-1200,
unmanaged
The CSM 1277 is an Industrial Ethernet switch of compact design for use in the SIMATIC S7-1200 PLC. It
can be used to multiply the Ethernet interface of the CPU for simultaneous communication with operator
panels, programming devices, other controllers, or the office world. The CSM 1277 and the SIMATIC
S7-1200 controller can be used to implement simple automation networks at low cost.
For SIMATIC
S7-300,
unmanaged
IP20
Type of oscillation: Frequency sweeps with a rate of change of 1 octave/minute.
10 Hz ≤ f < 57 Hz, constant amplitude 0.3 mm
58 Hz ≤ f < 150 Hz, constant acceleration 1 g (mounted on DIN rail) or 2 g (mounted
in switchboard)
Duration of oscillation: 10 frequency sweeps per axis in each direction of the three
mutually perpendicular axes
Type of shock: half-sine
Severity of shock: 15 g peak value, 11 ms duration
Direction of shock: 6 shocks in each of 3 mutually
perpendicular axes
For the economical construction of small, electrical Industrial Ethernets with star, tree and linear
structures using a SIMATIC S7-300 or ET 200M.
IP20
Type of oscillation: Frequency sweeps with a rate of change of 1 octave/minute.
5 Hz ≤ f ≤ 9 Hz, constant amplitude 3.5 mm
9 Hz ≤ f ≤ 150Hz, constant acceleration 1 g
Duration of oscillation: 10 frequency sweeps per axis at each of three vertically aligned axes
Type of shock: half-sine
Severity of shock: 15 g peak value, 11 ms duration
Direction of shock: 3 shocks in each direction (+/-) at each
of three vertically aligned axes
0 … +60°C
-40 … +70°C
SCALANCE XB-000
unmanaged
The SCALANCE XB-000 unmanaged Industrial Ethernet switches allow cost-effective solutions for setting
up small, electrical/optical star or line topologies with switching functionality in machines or plant units.
The enclosure is designed for space-saving installation in a control cabinet on a standard rail or wall.
IP20
Type of oscillation: Frequency sweeps with a rate of change of 1octave/minute.
5 Hz ≤ f ≤ 8.51 Hz, constant amplitude 7.0 mm
8.51 Hz ≤ f ≤ 150 Hz, constant acceleration 1 g
Duration of oscillation: 10 frequency sweeps per axis at each of three vertically aligned axes
Type of shock: half-sine
Severity of shock: 15 g peak value, 11 ms duration
‹ 95%
Direction of shock: 6 shocks in each direction (+/-) at each no condensation
of three vertically aligned axes
-10 … +60°C
-40 … +80°C
SCALANCE X-000
unmanaged
The SCALANCE X-000 unmanaged Industrial Ethernet switches are the space-saving entry-level solution
for setting up small Industrial Ethernet topologies. These switches are ideal for simple machine
networking because they are small, compact and low-cost.
IP20 or IP3
Type of oscillation: Frequency sweeps with a rate of change of 1 octave/minute.
10 Hz ≤ f ≤ 58 Hz, constant amplitude 0.075 mm
58 Hz ≤ f ≤ 500 Hz, constant acceleration 1 g
Duration of oscillation: 10 frequency sweeps per axis at each of three vertically aligned axes
Type of shock: half-sine
Severity of shock: 15 g peak value, 11 ms duration
‹ 95%
Direction of shock: 6 shocks in each direction (+/-) at each no condensation
of three vertically aligned axes
-10/0 … +65°C
-40 … +75°C
-40 … +80°C
Type of oscillation: Frequency sweeps with a rate of change of 1 octave/minute.
10 Hz ≤ f ≤ 58 Hz, constant amplitude 0.075 mm
58 Hz ≤ f ≤ 500 Hz, constant acceleration 2 g
Duration of oscillation: 10 frequency sweeps per axis at each of three vertically aligned axes
‹ 95% no condensation
Type of shock: half-sine
Severity of shock: 10 g peak value, 16 ms duration
100%, condensation/frost permissible. No
Direction of shock: 6 shocks in each direction (+/-) at each commissioning if condensation present.
of three vertically aligned axes
‹ 95% no condensation
-10 … +60°C
-20 … +70°C
-40 … +80°C
-25 ... +60°C
-40 … +80°C
-40 … +70°C
-40 … +80°C
‹ 95% no condensation
Type of oscillation: Frequency sweeps with a rate of change of 1 octave/minute.
Severity of shock: 15 g peak value, 6 ms duration
5 Hz ≤ f ≤ 9 Hz, constant amplitude 3.5 mm
Direction of shock: 6 shocks in each direction (+/-) at each
100%, condensation/frost permissible. No
9 Hz ≤ f ≤ 500 Hz, constant acceleration 1 g
of three vertically aligned axes
commissioning if condensation present.
Duration of oscillation: 20 frequency sweeps per axis at each of three vertically aligned axes
-40 … +70°C
-40 … +70°C
Type of oscillation: Frequency sweeps with a rate of change of 1 octave/minute.
Severity of shock: 15 g peak value, 6 ms duration
5 Hz ≤ f ≤ 9 Hz, constant amplitude 3.5 mm
Direction of shock: 6 shocks in each direction (+/-) at each 95%
9 Hz ≤ f ≤ 500 Hz, constant acceleration 1 g
of three vertically aligned axes
Duration of oscillation: 20 frequency sweeps per axis at each of three vertically aligned axes
-40 … +60°C
-40 … +70°C
Switch Modules & Media Converters
SIPLUS X-100
unmanaged
IP30
The SCALANCE X-100 unmanaged Industrial Ethernet switches are suitable for industrial use. These basic,
rugged,
low-cost
industrial
quality
switches
with
various
port
configurations
reduce
your
installation
costs
SIPLUS SCALANCE
IP30
X-100 unmanaged
and provide the right choice for each application. Some versions include integrated Power-over-Ethernet
SCALANCE X-100 media functionality which allows to power PoE capable devices using only the Ethernet cabling.
IP20
converter unmanaged
SCALANCE X-200
The SCALANCE X-200 managed Industrial Ethernet switches are universal, user-friendly switches for
managed
seamless, redundant networks. For machine-level applications right up to networked plant sections, they
are the reliable network solution for the optimal start in PROFINET automation networks. Configuration
IP20, IP30, or IP65/67
SIPLUS SCALANCE
and remote diagnostics can be integrated in the STEP 7 engineering tool. This increases the level of plant
X-200 managed
availability. Special devices with a high degree of protection permit a cabinet-free construction.
The SCALANCE XF-200 managed Industrial Ethernet switches permit cost-effective configuration of
Industrial Ethernet line, star or ring topologies with switching functionality for networks in which high
availability or remote diagnostics options are required. The XF-200 line essentially offers the same
features as the X-200 line for applications with depth restrictions.
SCALANCE
XF-200 managed
SCALANCE X-300
managed
The SCALANCE X-300 managed Industrial Ethernet switches are modular and powerful with a high
degree of functionality and flexibility. Networking of subsystems/plant areas, as well as interfacing to the
enterprise network. The SCALANCE X-300 managed product line combines the firmware functionality of
the SCALANCE X-400 line with the compact design of the SCALANCE X-200 line.
As a result, SCALANCE X-300 switches feature expanded management functions and enhanced firmware
functionality compared to SCALANCE X-200 switches. Electrical and optical Gigabit Ethernet ports are also
available. Modular versions further increase flexibility via separately available media modules.
SIPLUS SCALANCE
X-300 managed
IP20
‹ 95% no condensation
IP30
Type of oscillation: Frequency sweeps with a rate of change of 1 octave/minute.
Severity of shock: 15 g peak value, 11 ms duration
5 Hz ≤ f ≤ 9 Hz, constant amplitude 3.5 mm
Direction of shock: 6 shocks in each direction (+/-) at each
9 Hz ≤ f ≤ 150 Hz, constant acceleration 1 g
100%, condensation/frost permissible. No
of three vertically aligned axes
Duration of oscillation: 20 frequency sweeps per axis at each of three vertically aligned axes
commissioning if condensation present.
-40 … +60°C
-10 ... +60°C
-40 … +70°C
SCALANCE XR-300
managed
The SCALANCE XR-300 Industrial Ethernet switches correspond functionally to the SCALANCE X-300
switches. As rack switches, they are especially suited for use in 19” control cabinets. They are fully modular,
and due to their 2-port media modules (electrical and optical) they can be adapted to the task at hand.
IP20
For use in power plants and under difficult environmental conditions, ECC (Enhanced Environmental
Conditions) versions may be used in compact and rack designs.
Type of oscillation: Frequency sweeps with a rate of change of 1 octave/minute.
10 Hz ≤ f ≤ 58 Hz, constant amplitude 0.15 mm
Severity of shock: 15 g peak value, 11 ms duration
58 Hz ≤ f ≤ 500 Hz, constant acceleration 1 g
Direction of shock: 6 shocks in each direction (+/-) at each ‹ 95% no condensation
Rack mounted with 4 securing points:
5 Hz ≤ f ≤ 8.51 Hz, constant amplitude 7 mm
of three vertically aligned axes
8.51 Hz ≤ f ≤ 500 Hz, constant acceleration 1 g
Duration of oscillation: 10 frequency sweeps per axis at each of three vertically aligned axes
-40 … +70°C
-40 … +70°C
SCALANCE X-400
managed / Layer 3
SCALANCE X-400 managed switches are for segmenting your Industrial Ethernet networks. Due to their
modular design, these switches can be adapted to the specific task at hand in high-performance plant
networks, permitting seamless integration of industrial and office networks. The high amount of diverse
IP20
industrial and IT features (i.e. VLAN, IGMP, RSTP) make this switch the perfect choice for the high demands
of the future.
Type of oscillation: Frequency sweeps with a rate of change of 1 octave/minute.
10 Hz ≤ f ≤ 58 Hz, constant amplitude 0.075 mm
58 Hz ≤ f ≤ 150 Hz, constant acceleration 1 g
Rack mounted with 4 securing points:
5 Hz ≤ f ≤ 9 Hz, constant amplitude 3.5 mm
9 Hz ≤ f ≤ 150 Hz, constant acceleration 1 g
Duration of oscillation: 20 frequency sweeps per axis at each of three vertically aligned axes
-40/0 … +60/70°C
-40° … +80°C
SCALANCE X-500
managed / Layer 3
The SCALANCE X-500 series designed for networking and structuring of high-performance industrial
networks and for connecting office networks to automation networks. As a layer 3 switch, SCALANCE
X-500 can be used as a central component in backbone networks, e.g. when a high number of ports is
required, at extremely high transmission rates (10 Gigabit Ethernet), or for redundant connection to an
office infrastructure. The rack switch (19” design) can be used flexibly to suit different requirements
thanks to its modular design and the plug-in 4-port media modules (electrical and optical). Routing
functions on layer 3 permit communication between different IP subnetworks.
IP20
Type of oscillation: Frequency sweeps with a rate of change of 1 octave/minute.
10 Hz ≤ f ≤ 58 Hz, constant amplitude 0.075 mm
58 Hz ≤ f ≤ 150 Hz, constant acceleration 1 g
Severity of shock: 15 g peak value, 11 ms duration
Rack mounted with 4 securing points:
Direction of shock: 6 shocks in each direction (+/-) at each ‹ 95% no condensation
5 Hz ≤ f ≤ 8.51 Hz, constant amplitude 3.5 mm
of three vertically aligned axes
8.51 Hz ≤ f ≤ 500 Hz, constant acceleration 1 g
Duration of oscillation: 10 frequency sweeps per axis at each of three vertically aligned axes
0 … +60°C
-40 … +70°C
The security modules of the SCALANCE S range can be used to protect all devices of an Ethernet network
against unauthorized access. In addition, SCALANCE S612 or SCALANCE S623 also protect the data
transmission between devices or network segments (e.g. automation cells) against data manipulation
and espionage using VPN technology. SCALANCE S is optimized for use in automation and industrial
environments, and meets the specific requirements of automation systems such as easy upgrades of
existing plants, simple installation, and minimal downtimes in the event of a fault.
IP20
‹ 95% no condensation
-40 … +60°C
-40 … +80°C
With our comprehensive portfolio, we offer the right CP for every requirement, as lean, standard or
added value versions for SIMATIC S7-300, the modular controller for innovative system solutions in the
manufacturing industry. Connecting controllers via these CPs permits direct integration into Industrial
Ethernet networks.
IP20
Type of shock: half-sine
Severity of shock: 15 g peak value, 11 ms duration
‹ 95% no condensation
Direction of shock: 6 shocks in each direction (+/-) at each
of three vertically aligned axes
Industrial Ethernet Security – Security Integrated
SCALANCE S Security
Modules
Security Communication
Processor Family for
SIMATIC
Communication Processors
For SIMATIC S7-300
For SIPLUS S7-300
For SIMATIC S7-400
Within the controller family, the SIMATIC S7-400 is designed for system solutions in manufacturing and
process automation in the medium to upper performance range. The connection of SIMATIC S7-400 via
communications processors permits direct integration of the controllers into Industrial Ethernet networks.
IP20
For SIPLUS S7-400
The SIMATIC S7-1200 communication interface consists of a noise-immune RJ45 connector with autocrossover functionality, supporting up to 16 Ethernet connections and providing data transmission rates
up to 10/100 Mbit/s.
To minimize cabling overheads and provide maximum networking flexibility, the CSM 1277 Compact
Switch Module can be used together with the SIMATIC S7-1200 to configure a uniform or mixed network
consisting of line, tree or star topologies.
The Siemens CP 1543-1 communication processor securely connects the new SIMATIC S7-1500
controller to Ethernet networks. By combining a variety of security features such as an SPI (Stateful
Packet Inspection) firewall, password requests and data encryption protocols such as FTPS and SNMPv3,
the new communication module protects individual S7-1500 stations or even entire automation cells
against unauthorized access. This allows the PLC to communicate with higher-level control systems or
industrial IT applications via a secure Ethernet connection.
For SIMATIC
S7-1200
For SIMATIC
S7-1500
Type of oscillation: Frequency sweeps with a rate of change of 1 octave/minute.
5 Hz ≤ f ≤ 9 Hz, constant amplitude 3.5 mm
9 Hz ≤ f ≤ 150Hz, constant acceleration 1 g
Duration of oscillation: 10 frequency sweeps per axis at each of three vertically aligned axes
Type of shock: half-sine
‹ 95% no condensation
Severity of shock: 15 g peak value, 11 ms duration
Direction of shock: 3 shocks in each direction (+/-) at each 100%, condensation/frost permissible. No
of three vertically aligned axes
commissioning if condensation present.
Type of oscillation: Frequency sweeps with a rate of change of 1 octave/minute.
10 Hz ≤ f < 57 Hz, constant amplitude 0.075 mm
Type of shock: half-sine
58 Hz ≤ f < 500 Hz, constant acceleration 1 g
Severity of shock: 10 g peak value, 16 ms duration
Duration of oscillation: 10 frequency sweeps per axis in each direction of the three mutual- Direction of shock: 100 shocks per axis
ly perpendicular axes
‹ 95% |no condensation
0 … +40/60°C
-40 … +70°C
0/-25 ... +60/70°C
0 … +60°C
-40 … +70°C
100%, condensation/frost permissible. No
commissioning if condensation present.
0/-25 ... +60/70°C
IP20
Type of oscillation: Frequency sweeps with a rate of change of 1 octave/minute.
10 Hz ≤ f < 57 Hz, constant amplitude 0.3 mm
58 Hz ≤ f < 150 Hz, constant acceleration 1 g (mounted on DIN rail) or 2 g (mounted in
switchboard)
Duration of oscillation: 10 frequency sweeps per axis in each direction of the three
mutually perpendicular axes
Type of shock: half-sine
Severity of shock: 15 g peak value, 11 ms duration
Direction of shock: 6 shocks in each of 3 mutually
perpendicular axes
‹ 95% no condensation
0 … +60°C
-40 … +70°C
IP20
Type of oscillation: Frequency sweeps with a rate of change of 1 octave/minute.
5 Hz ≤ f ≤ 8.4 Hz, constant amplitude 7 mm
8.4 Hz ≤ f ≤ 150 Hz, constant acceleration 2 g
Duration of oscillation: 10 frequency sweeps per axis, along each of the 3 mutually perpendicular axes
Type of shock: Half-sine
Shock intensity: 15 g max., duration 11 ms
Direction of shock: 3 shocks each in (+/-) direction,
along each of the 3 mutually perpendicular axes
‹ 95% no condensation
0 … +60°C
-40 … +70°C
IP20
Type of oscillation: Frequency sweeps with a rate of change of 1 octave/minute.
5 Hz ≤ f ≤ 9 Hz, constant amplitude 3.5 mm
9 Hz ≤ f ≤ 150Hz, constant acceleration 1 g
Duration of oscillation: 10 frequency sweeps per axis at each of three vertically aligned axes
Type of shock: Half-sine
Shock intensity: 15 g max., duration 11 ms
Direction of shock: 3 shocks each in (+/-) direction,
along each of the 3 mutually perpendicular axes
‹ 95% no condensation
–40 … +75°C
–40 … +85°C
Type of oscillation: Frequency sweeps with a rate of change of 1 octave/minute.
5 Hz ≤ f ≤ 9 Hz, constant amplitude 3.5 mm
9 Hz ≤ f ≤ 150Hz, constant acceleration 1 g
Duration of oscillation: 10 frequency sweeps per axis at each of three vertically aligned axes
Type of shock: half-sine
Severity of shock: 15 g peak value, 11 ms duration
Direction of shock: 3 shocks in each direction (+/-) at
each of three vertically aligned axes
90% without condensation
–20 … +60°C
–40 … +70°C
Type of oscillation: Frequency sweeps with a rate of change of 1 octave/minute.
5 Hz ≤ f ≤ 9 Hz, constant amplitude 3.5 mm
9 Hz ≤ f ≤ 150Hz, constant acceleration 1 g
Duration of oscillation: 10 frequency sweeps per axis at each of three vertically
aligned axes
Type of shock: half-sine
Severity of shock: 15 g peak value, 11 ms duration
Direction of shock: 3 shocks in each direction (+/-) at
each of three vertically aligned axes
–20 … +60°C
–40 … +70°C
Type of oscillation: Frequency sweeps with a rate of change of 1 octave/minute.
5 Hz ≤ f ≤ 9 Hz, constant amplitude 3.5 mm
9 Hz ≤ f ≤ 150Hz, constant acceleration 1 g
Duration of oscillation: 10 frequency sweeps per axis at each of three vertically aligned axes
Type of shock: half-sine
Severity of shock: 15 g peak value, 11 ms duration
Direction of shock: 3 shocks in each direction (+/-) at
each of three vertically aligned axes
90% without condensation
–40 … +70°C
–40 … +70°C
Type of oscillation: Frequency sweeps with a rate of change of 1 octave/minute.
5 Hz ≤ f ≤ 9 Hz, constant amplitude 3.5 mm
9 Hz ≤ f ≤ 150Hz, constant acceleration 1 g
Duration of oscillation: 10 frequency sweeps per axis at each of three vertically aligned axes
Type of shock: half-sine
Severity of shock: 15 g peak value, 11 ms duration
Direction of shock: 3 shocks in each direction (+/-) at
each of three vertically aligned axes
100%
–40 … +60°C
–40 … +85°C
5…80% at 25° C
without condensation
+5 … +40°C
–40 … +60°C
Industrial Wireless Communication Devices
Remote Connectivity
SCALANCE M875 is a router for wireless IP communication between Industrial Ethernet-based
SCALANCE M875 UMTS programmable controllers via mobile radio networks of the 3rd generation (UMTS) and the 2nd
router
generation (GSM). High data transfer rate thanks to HSDPA. Integrated security functions with firewall.
Use as VPN end point (IPsec).
IEEE 802.11n Industrial Wireless LAN
SCALANCE W748
RJ45 for use in control
cabinet
SCALANCE W788 RJ45
for use in
control cabinet
SCALANCE W748 M12
for indoor use outside
of a control cabinet
SCALANCE W788 M12
for indoor use outside
of a control cabinet
SCALANCE W788 M12
EEC for enhanced
environmental
conditions
SCALANCE W786 RJ45
for outdoor use
The SCALANCE W748 RJ45 Client modules are perfectly suited for applications where the client module is
to be mounted inside a control cabinet. It offers simple and easy integration of Industrial Ethernet stations
into Industrial Wireless LANs using 2.4GHz or 5GHz with up to 450Mbit/s.
Powerful, reliable and secure Wireless communication.
IP30
The SCALANCE W788 RJ45 products are ideally suited for setting up Industrial Wireless LANs (IWLAN) in
2.4 GHz or 5 GHz with up to 450Mbit/s. The W788 RJ45 is available with 1 or 2 wireless interfaces. They
can be used in all applications that require a high degree of operational reliability, even in extremely harsh
ambient conditions. The W788 RJ45 versions are designed for use inside of a control cabinet. Different
versions for standalone and use in combination with the WLC711 wireless LAN controller are available.
The SCALANCE W748 M12 Client modules are perfectly suited for applications where the client module is
to be mounted indoors but outside of a control cabinet. It offers simple and easy integration of Industrial
Ethernet stations into Industrial Wireless LANs using 2.4GHz or 5GHz with up to 450Mbit/s. Powerful,
reliable and secure Wireless communication.
The SCALANCE W788 M12 products are ideally suited for setting up Industrial Wireless LANs (IWLAN) in
2.4 GHz or 5 GHz with up to 450Mbit/s. The W788 M12 is available with 1 or 2 wireless interfaces. They
can be used in all applications that require a high degree of operational reliability, even in extremely
harsh ambient conditions. The W788 M12 versions are designed for use indoors but outside of a control
IP65
cabinet. Different versions for standalone and use in combination with the WLC711 wireless LAN
controller are available.
The SCALANCE W788 M12 EEC products are ideally suited for setting up Industrial Wireless LANs (IWLAN)
in 2.4 GHz or 5 GHz with up to 450Mbit/s, but especially in the railroad environment or for use under extended environmental conditions. Conformal coating makes these devices immune against condensation
and allows for use in the harshest environment. Different versions for standalone and use in combination
with the WLC711 wireless LAN controller are available.
SCALANCE W786 RJ45 products are ideally suited for setting up Industrial Wireless LANs (IWLAN) in
2.4 GHz or 5 GHz with up to 450Mbit/s. These extremely rugged devices are especially designed for
applications with high climatic requirements or for installation outdoors and in areas accessible to the
IP65
public. Resistance against UV and salt spray make the use cases for these devices almost limitless. Different
versions for standalone and use in combination with the WLC711 wireless LAN controller are available.
Industrial Wireless LAN
Controller SCALANCE
WLC711
The SCALANCE WLC711 Wireless LAN Controller is an IWLAN controller for centralized management of a
wireless LAN in the industrial environment (configuration, diagnostics, firmware updates, access control,
security settings, RF management).
IM 154-6 PN IWLAN
This is an Interface module for handling communication between ET 200pro and host PROFINET IO
controllers over Industrial Wireless LAN (IWLAN) radio networks for 2.4 GHz or 5 GHz with data transfer
rates up to 54 Mbit/s. Protection against illegal access, espionage, tapping and falsification through use
of effective encryption mechanisms. Fast exchange of devices through use of interchangeable medium
MICRO MEMORY CARD.
IP20
100% without condensation
Wall mounting with mounting brackets:
Type of oscillation: Frequency sweeps with a rate of change of 1 octave/minute.
10 Hz ≤ f ≤ 58 Hz, constant amplitude 0.0375 mm
Severity of shock: 5 g peak value, 30 ms duration
58 Hz ≤ f ≤ 200 Hz, constant acceleration 0.5 g
(with hard disk drive
Duration of oscillation: 10 frequency sweeps per axis at each of three vertically aligned axes
90% without condensation
DIN rail installation: no excitation permitted
Type of vibration: Frequency sweeps with a rate of change of 1 octave/minute.
5 Hz ≤ f ≤ 9 Hz, constant amplitude 3.5 mm
9 Hz ≤ f ≤ 150 Hz, constant acceleration 1 g
Type of shock: half-sine
Shock intensity: 15 g peak value, 11 ms duration
Direction of shock: 3 shock tests in +/- direction in each
of the 3 perpendicular axes
80%
0 … +55°C
-40 … +70°C
Type of oscillation: Frequency sweeps with a rate of change of 1 octave/minute.
5 Hz ≤ f ≤ 9 Hz, constant amplitude 3.5 mm
9 Hz ≤ f ≤ 150Hz, constant acceleration 1 g
Duration of oscillation: 10 frequency sweeps per axis at each of three vertically
aligned axes
Type of shock: half-sine
Severity of shock: 15 g peak value, 11 ms duration
Direction of shock: 3 shocks in each direction (+/-) at
each of three vertically aligned axes
90% without condensation
–20 … +60°C
–40 … +70°C
Type of oscillation: Frequency sweeps with a rate of change of 1 octave/minute.
5 Hz ≤ f ≤ 9 Hz, constant amplitude 3.5 mm
9 Hz ≤ f ≤ 150Hz, constant acceleration 1 g
Duration of oscillation: 10 frequency sweeps per axis at each of three vertically
aligned axes
Type of shock: half-sine
Severity of shock: 15 g peak value, 11 ms duration
Direction of shock: 3 shocks in each direction (+/-) at
each of three vertically aligned axes
–20 … +60°C
–40 … +70°C
IP65
Type of oscillation: Frequency sweeps with a rate of change of 1 octave/minute.
5 Hz ≤ f ≤ 9 Hz, constant amplitude 3.5 mm
9 Hz ≤ f ≤ 150Hz, constant acceleration 1 g
Duration of oscillation: 10 frequency sweeps per axis at each of three vertically aligned axes
Type of shock: half-sine
Severity of shock: 15 g peak value, 11 ms duration
Direction of shock: 3 shocks in each direction (+/-) at
each of three vertically aligned axes
100% without condensation
–40 … +70°C
–40 … +85°C
IP65
Type of oscillation: Frequency sweeps with a rate of change of 1 octave/minute.
5 Hz ≤ f ≤ 9 Hz, constant amplitude 3.5 mm
9 Hz ≤ f ≤ 150Hz, constant acceleration 1 g
Duration of oscillation: 10 frequency sweeps per axis at each of three vertically aligned axes
Type of shock: half-sine
Severity of shock: 15 g peak value, 11 ms duration
Direction of shock: 3 shocks in each direction (+/-) at
each of three vertically aligned axes
100% without condensation
–40 … +70°C
–40 … +85°C
IP65/66/67
IEEE 802.11a/bg Industrial Wireless LAN
SCALANCE W784 for
use in control cabinet
SCALANCE W740 for
use in control cabinet
SCALANCE W788 for
indoor use
SCALANCE W740 for
indoor use
SCALANCE W786 for
outdoor use
The SCALANCE W784 access points are ideally suited for setting up Industrial Wireless LANs (IWLAN) in
2.4 GHz or 5 GHz with up to 54Mbit/s. They can be used in all applications that require a high degree of
operational reliability, even in harsh ambient conditions. The W784 versions are designed for use inside
of a control cabinet.
IP30
The SCALANCE W740 Client modules are perfectly suited for applications where the client module is to
be mounted inside a control cabinet. It offers simple and easy integration of Industrial Ethernet stations
into Industrial Wireless LANs using 2.4GHz or 5GHz with up to 54Mbit/s. Powerful, reliable and secure
Wireless communication.
The SCALANCE W788 products are ideally suited for setting up Industrial Wireless LANs (IWLAN) in 2.4 GHz
or 5 GHz with up to 54Mbit/s. The W788 access points are available with 1 or 2 wireless interfaces. They
can be used in all applications that require a high degree of operational reliability, even in extremely harsh
ambient conditions. The W788 access points are designed for use indoors but outside of a control cabin.
IP65
The SCALANCE W740 Client modules are perfectly suited for applications where the client module is to
be mounted indoors but outside of a control cabinet. It offers simple and easy integration of Industrial
Ethernet stations into Industrial Wireless LANs using 2.4GHz or 5GHz with up to 54Mbit/s. Powerful,
reliable and secure Wireless communication.
The SCALANCE W786 series is perfectly suitable for applications with high climatic requirements when
installed outdoors and in areas accessible to the public. Resistance against UV and salt spray make the use
cases for these devices almost limitless. Different versions with up to 3 wireless interfaces allow easy set
up of Industrial Wireless LANs (IWLAN) in 2.4 GHz or 5 GHz with up to 54Mbit/s.
SCALANCE W786-2HPW controller-based access points can only be operated on the SCALANCE WLC
Controller Access Points
IWLAN Controller and Enterasys Wireless Controller (previously HiPath Wireless Controller). Especially
SCALANCE W786 for
well suited to applications with high climatic requirements when installed outdoors and in areas
outdoor use
accessible to the public. Use with controller based radios.
1)
7)
Additional certifications are available, as noted on the Siemens Industry Online Support Certification page at https://support.automation.siemens.com. 2) Not all Siemens products are listed here. Please visit www.usa.siemens.com/automation to view our full product and software offerings.
Not all part numbers within a product family may be certified to these standards. Certification status may change without notification. It is the user’s responsibility to determine applicable certifications by referring to the ratings marked on the product. Siemens Industry, Inc.
3333 Old Milton Parkway
Alpharetta, GA 30005
1-800 -241- 4453
[email protected]
www.usa.siemens.com/automation
Subject to change without prior notice.
Order No: AMPB-OGCRT-0315
All rights reserved.
Printed in USA
© 2015 Siemens Industry, Inc.
3)
100% without condensation
Vibration during operation. Tested in accordance with: IEC 60068-2-6.
4) Shock
during operation. Tested to: IEC 60068-2-2.
5)
Tested to DIN IEC 60068-2-78, DIN IEC 60068-2-30, -60068-2-56.
6)
Ambient temperature during operations. At full processor capacity (without throttling).
Other Notable Certifications 1) 7)
GL Germanischer
Lloyd
LRS Lloyd’s
Register of
Shipping
NK Nippon
Kaiji
Kyokai
PRS Polski
Rejestr
Statkow
RINA Registro
Italiano
Navale
RMRS Russian
Maritime
Register of CE
Shipping
approval
UL
certification
CSA
cULus
approval approval
C-Tick
approval
IEC
61131
Korea
certification
GOST-R
UL
INMETRO CNEX
CKT
Similar pages