4.0A Single-Phase Bridge Rectifier

Ordering number : EN2797B
DBF40G
4.0A Single-Phase Bridge Rectifier
http://onsemi.com
Features
•
•
•
•
Glass passivation for high reliability
Plastic molded structure
Peak reverse voltage : VRM=600V
Average output current : IO=4.0A
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter
Peak Reverse Voltage
Symbol
Conditions
Value
VRM
Unit
600
V
4.0
A
Average Output Current
IO
Tc=108°C,with 80×80×1.5mm³ Al fin
Ta=25°C,without fin
2.3
A
Surge Forward Current
IFSM
50Hz sine wave, 1cycle
80
A
Junction Temperature
Tj
150
°C
Storage Temperature
Tstg
--40 to +150
°C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed,
damage may occur and reliability may be affected.
Electrical Characteristics at Ta=25°C
Parameter
Forward Voltage
Symbol
Reverse Current
VF
IR
Thremal Resistance(Junction-Ambient)
Rth(j-a)
Thremal Resistance(Junction-Case)
Rth(j-c)
Conditions
Value
min
typ
IF=2.0A
VR=VRM
Without fin
Unit
max
1.05
With Al fin
V
10
mA
30
°C / W
5.5
°C / W
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be
indicated by the Electrical Characteristics if operated under different conditions.
Package Dimensions
unit:mm(typ.)
Electrical Connection
Ordering Information
Device
DBF40G
Semiconductor Components Industries, LLC, 2014
June, 2014
Shipping
memo
250 pcs./box
Pb-Free
60814HK TC-00003131/52098HA/52595GI/N098TA,TS No. A2797-1/2
DBF40G
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at
www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no
warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the
application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental
damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual
performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical
experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use
as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in
which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for
any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors
harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or
death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the
part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PS No. A2797-2/2
Similar pages