MUR5150E Preferred Device SCANSWITCH™ Power Rectifier For Use As A Damper Diode In High and Very High Resolution Monitors http://onsemi.com The MUR5150E is a state-of-the-art Ultrafast Power Rectifier specifically designed for use as a damper diode in horizontal deflection circuits for high and very high resolution monitors. In these applications, the outstanding performance of the MUR5150E is fully realized when paired with the appropriate 1500 V SCANSWITCH Bipolar Power Transistor. • • • • • SCANSWITCH RECTIFIER 5.0 AMPERES 1500 VOLTS 1500 V Blocking Voltage 20 mjoules Avalanche Energy Guaranteed Peak Transient Overshoot Voltage Specified, 17 Volts (typical) Forward Recovery Time Specified, 175 ns (typical) Epoxy Meets UL94, VO at 1/8″ 1 4 3 4 Mechanical Characteristics • Case: Epoxy, Molded • Weight: 1.9 grams (approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal • • • Leads are Readily Solderable Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds Shipped 50 units per plastic tube Marking: U5150E 1 3 TO−220AC CASE 221B STYLE 1 MAXIMUM RATINGS Rating Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 1500 V Average Rectified Forward Current (Rated VR, TC = 100°C) IF(AV) 5.0 A Peak Repetitive Forward Current (Rated VR, Square Wave, 20 kHz, TC = 100°C) Per Leg IFRM 10 A Non−Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) IFSM 100 A Operating Junction and Storage Temperature Range TJ, Tstg −65 to +125 °C Controlled Avalanche Energy WAVAL 20 mJ MARKING DIAGRAM U5150E U5150E = Device Code ORDERING INFORMATION Device Package Shipping MUR5150E TO−220 50 Units/Rail Preferred devices are recommended choices for future use and best overall value. © Semiconductor Components Industries, LLC, 2006 September, 2006 − Rev. 3 1 Publication Order Number: MUR5150E/D MUR5150E THERMAL CHARACTERISTICS Characteristic Thermal Resistance — Junction to Case Symbol Value Unit RθJC 2.0 °C/W ELECTRICAL CHARACTERISTICS Characteristic Symbol Maximum Instantaneous Forward Voltage (Note 1.) (iF = 2.0 Amps, TJ = 25°C) (iF = 5.0 Amps, TJ = 25°C) vF Maximum Instantaneous Reverse Current (Note 1.) (Rated dc Voltage, TJ = 125°C) (Rated dc Voltage, TJ = 25°C) iR Maximum Reverse Recovery Time (IF = 1.0 Amps, di/dt = 50 Amps/μs) Maximum Forward Recovery Time (IF = 6.5 Amps, di/dt = 12 Amps/μs) Peak Transient Overshoot Voltage Typ Max Unit Volts 1.7 2.0 2.0 2.4 100 10 500 50 trr 130 175 tfr 175 225 ns VRFM 17 20 Volts μA ns 1. Pulse Test: Pulse Width = 300 μs, Duty Cycle ≤ 2.0% i F, INSTANTANEOUS FORWARD CURRENT (AMPS) TYPICAL ELECTRICAL CHARACTERISTICS 100 μ I R , REVERSE LEAKAGE CURRENT (A) 1000 50 20 TJ = 125°C 10 85°C 25°C 5 2 1.0 0.5 100 10 TJ = 125°C 1 80°C 0.1 25°C 0.01 0.2 0.1 0.6 1.0 1.4 1.8 2.2 2.6 vF, INSTANTANEOUS VOLTAGE (VOLTS) 3.0 0.001 3.4 0 17.5 15 SQUARE WAVE 10 1.5 K dc 7.5 5 F(AV) 2.5 8.0 (RATED VR APPLIED) RθJC = 2.0°C/W 7.0 6.0 5.0 4.0 3.0 SQUARE WAVE 2.0 dc 1.0 I P TJ = 125°C 12.5 0.6 K 0.9 K 1.2 K VR, REVERSE VOLTAGE (VOLTS) Figure 2. Typical Reverse Leakage Current , AVERAGE FORWARD CURRENT (AMPS) 20 F(AV) , AVERAGE POWER DISSIPATION (WATTS) Figure 1. Typical Forward Voltage 0.3 K 0 1 2 3 4 5 6 IF(AV), AVG FORWARD CURRENT (AMPS) 7 8 85 Figure 3. Forward Power Dissipation 90 95 100 105 110 115 TC, CASE TEMPERATURE (°C) Figure 4. Current Derating Case http://onsemi.com 2 120 125 MUR5150E TYPICAL ELECTRICAL CHARACTERISTICS 250 225 TYPICAL CAPACITANCE AT 0 V = 240 pF 100 kHz v f v 1.0 MHz C T , CAPACITANCE (pF) 200 175 150 125 100 75 50 25 0 0.1 1 10 VR, REVERSE VOLTAGE (VOLTS) 100 Figure 5. Typical Capacitance 200 VR = 30 V 270 180 240 160 di/dt = 100 A/μs 210 140 50 A/μs 180 120 150 100 50 A/μs 120 80 90 60 100 A/μs 60 40 30 20 0 0 0.5 1 1.5 2 2.5 3 3.5 4 IF, FORWARD CURRENT (AMPS) 4.5 5 0 STORED RECOVERY CHARGE REVERSE RECOVERY TIME Figure 6. Typical Reverse Switching Characteristics http://onsemi.com 3 Q RR , STORED RECOVERY CHARGE (nC) T RR , REVERSE RECOVERY TIME (ns) 300 MUR5150E PACKAGE DIMENSIONS TO−220 TWO−LEAD CASE 221B−04 ISSUE D NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. C B Q F T S 4 A 1 3 U H K L D G INCHES MIN MAX 0.595 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.190 0.210 0.110 0.130 0.018 0.025 0.500 0.562 0.045 0.060 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 DIM A B C D F G H J K L Q R S T U R J STYLE 1: PIN 1. 2. 3. 4. MILLIMETERS MIN MAX 15.11 15.75 9.65 10.29 4.06 4.82 0.64 0.89 3.61 3.73 4.83 5.33 2.79 3.30 0.46 0.64 12.70 14.27 1.14 1.52 2.54 3.04 2.04 2.79 1.14 1.39 5.97 6.48 0.000 1.27 CATHODE N/A ANODE CATHODE SCANSWITCH is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 http://onsemi.com 4 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MUR5150E/D