2-Channel EMI Filter with ESD Protection for Headset Speaker Applications

CM1683
Praetorian) L-C EMI Filter
with ESD Protection for
Headsets/Speakers
Product Description
http://onsemi.com
CUDFN8
DE SUFFIX
CASE 505AF
100 pF
C
8
100 pF
C
3 nH
4
100 pF
L
C
Features
•
•
•
•
•
•
L
Two Channels of EMI Filtering
±8 kV ESD Protection (IEC 61000−4−2, Contact Discharge)
±15 kV ESD Protection (HBM)
Greater than −40 dB of Attenuation at 1 GHz
8−Lead, 2.00 mm x 2.00 mm, 0.5 mm Pitch CUDFN Package
These Devices are Pb−Free and are RoHS Compliant
Filter #1
3 nH
1
5
100 pF
Filter #2
Filter #1
ELECTRICAL SCHEMATIC
Filter #2
The CM1683 is an L−C EMI filter array with ESD protection, which
integrates two Pi−filters (C−L−C) for the headset speaker. The
CM1683 has component values of 100 pF − 3 nH − 100 pF. The parts
include ESD protection diodes on all input/output pins, which provide
a very high level of protection for sensitive electronic components that
may be subjected to electrostatic discharge (ESD). The ESD diodes
connected to the filter ports safely dissipate ESD strikes of ±8 kV,
beyond the maximum requirement of the IEC61000−4−2 international
standard. Using the MIL−STD−883 (Method 3015) specification for
Human Body Model (HBM) ESD, the pins are protected for contact
discharges at greater than ±15 kV.
This device is particularly well suited for portable electronics (e.g.
mobile handsets, PDAs, notebook computers) because of its small
package format and easy−to−use pin assignments. In particular, the
CM1683 is ideal for EMI filtering and protecting speaker output lines
from ESD for the headset speaker in mobile handsets. Most speakers
have impedance of 8 W and in order to maximize the power output, the
resistance of an EMI filter needs to be as low as possible and the
CM1683 addresses this by having a C−L−C based EMI filter where the
inductor has less than 1 W of resistance.
C
MARKING DIAGRAM
P83
Applications
• Headset Speaker Port in Mobile Handsets
• I/O Port Protection for Mobile Handsets, Notebook Computers,
•
PDAs, etc.
EMI Filtering for Data Ports in Cell Phones, PDAs or Notebook
Computers
P83
= CM1683−02DE
ORDERING INFORMATION
Device
Package
Shipping†
CM1683−02DE
CUDFN−8
(Pb−Free)
3000/Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2011
April, 2011 − Rev. 3
1
Publication Order Number:
CM1683/D
CM1683
PACKAGE / PINOUT DIAGRAMS
Table 1. PIN DESCRIPTIONS
8−Lead CUDFN Package
Pin
Name
1
Filter #1
2
NC
No connect
3
NC
No connect
4
Filter #2
Filter #2
5
Filter #2
Filter #2
6
NC
No connect
7
NC
No connect
8
Filter #1
Filter #1
GND
PAD
GND
Ground
Top View
(Pins Down View)
Description
Bottom View
(Pins Up View)
1 2 3
8 7 6 5
Filter #1
4
GND
PAD
Pin 1
Marking
1 2 3 4
8 7 6
5
CM1683−02DE
8−Lead CUDFN Package
SPECIFICATIONS
Table 2. ABSOLUTE MAXIMUM RATINGS
Parameter
Rating
Units
−65 to +150
°C
DC current per inductor
30
mA
DC package power rating
0.5
W
Storage Temperature Range
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
Table 3. STANDARD OPERATING CONDITIONS
Parameter
Operating Temperature Range
Rating
Units
−40 to +85
°C
Table 4. ELECTRICAL OPERATING CHARACTERISTICS (Note 1)
Symbol
Parameter
L
Inductance
R
DC Channel Resistance
CTOT
C
ILEAK
Conditions
Typ
Max
3.0
1
W
240
pF
Capacitance C
2.5 V DC; 1 MHz, 30 mV AC
100
Diode Leakage Current
VIN = +5.0 V
0.1
VIN = −5.0 V
−1.0
−0.1
ILOAD = 10 mA
ILOAD = −10 mA
5
−15
7
−10
Signal Clamp Voltage
Positive Clamp
Negative Clamp
VESD
In−system ESD Withstand Voltage:
a) Human Body Model, MIL−STD−883, Method 3015
b) Contact Discharge per IEC 61000−4−2 Level 4
(Note 2)
Cut−off frequency
ZSOURCE = 50 W, ZLOAD = 50 W
L = 3 nH, C = 100 pF
1. TA = 25°C unless otherwise specified.
2. ESD applied to input and output pins with respect to GND, one at a time.
http://onsemi.com
nH
200
2.5 V DC; 1 MHz, 30 mV AC
2
160
Units
0.75
Total Channel Capacitance
VSIG
fC
Min
pF
1.0
mA
mA
15
−5
V
kV
±15
±8
31
MHz
CM1683
PERFORMANCE INFORMATION
Typical Filter Performance (nominal conditions unless specified otherwise, 50 W Environment)
Figure 1. Insertion Loss vs. Frequency (Filter #1 to GND)
Frequency (MHz)
Figure 2. Insertion Loss vs. Frequency (Filter #2 to GND)
http://onsemi.com
3
CM1683
PACKAGE DIMENSIONS
CUDFN8, 2x2, 0.5P
CASE 505AF−01
ISSUE O
D
PIN ONE
REFERENCE
2X
0.10 C
2X
0.10 C
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED TERMINAL AND
IS MEASURED BETWEEN 0.10 AND 0.20mm FROM
THE TERMINAL TIP.
4. COPLANARITY APPLIES TO THE EXPOSED PAD AS
WELL AS THE TERMINALS.
A B
E
D1
TOP VIEW
DIM
A
A1
A3
b
D
D1
D2
E
E2
e
K
L
M
END VIEW
M
DETAIL A
0.10 C
A3
A
A1
0.08 C
NOTE 4
DETAIL A C
SIDE VIEW
D2
1
8X
L
SEATING
PLANE
MILLIMETERS
MIN
MAX
0.55
0.65
0.00
0.05
0.20 REF
0.15
0.25
2.00 BSC
1.80 BSC
1.50
1.70
2.00 BSC
0.80
1.00
0.50 BSC
0.20
--0.25
0.35
--10 5
RECOMMENDED
MOUNTING FOOTPRINT*
8X
1.70
4
0.52
E2
1.00
K
8
5
e
e/2
8X
2.30
b
0.10 C A
0.05 C
B
1
NOTE 3
BOTTOM VIEW
0.50
PITCH
8X
0.27
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
Praetorian® is a registered trademark of Semiconductor Components Industries, LLC.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
http://onsemi.com
4
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
CM1683/D
Similar pages