4 Channel EMI Pi-Filter Array with Full USB Filter

NUF4107FC
Four Channel EMI Pi−Filter
Array with Full USB Filter
This device is a four−channel EMI filter array for data lines. Greater
than −35 dB attenuation is obtained at frequencies from 800 MHz to
2.2 GHz. It also offers USB filtering circuitry with speed detection.
This includes the inline resistors for impedance matching and EMI
filtering. ESD protection is provided across all capacitors.
Features
•
•
•
•
•
•
•
•
•
EMI Filtering and ESD Protection for Data Lines
USB 1.1 Filtering Provided with Speed Detection
Integration of 27 Discretes Offers Cost and Space Savings
350 mm Solder Spheres
All TVS Protected Inputs Comply with IEC61000−4−2 (Level 4)
30 kV (Contact)
30 kV (Air)
Low Profile Flip−Chip Packaging
MSL 1
All Pins Exceed 2000 V Human Body Model (Note 1)
Pb−Free Package is Available*
http://onsemi.com
CIRCUIT DESCRIPTION
R1
A1
D11
A3
B3
C5
VPP
DC Power per Resistor
PR
100
mW
DC Power per Package
PT
600
mW
Junction Temperature
TJ
150
°C
Operating Temperature Range
Top
−40 to +85
°C
Storage Temperature Range
Tstg
−55 to +150
°C
C4
C6
D6
C5
C8
C7
D8
R6
C9
D9
Unit
D4
R5
A6
Value
C3
C4
R4
A4
B5
ESD Discharge IEC61000−4−2 (Note 1)
− Air Discharge, Contact Discharge
Human Body Model
Machine Model
C6
D10
C10
kV
30
16
0.4
FLIP−CHIP−17
CASE 499AD
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. This does not include Pins B1, C1 and C2
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
March, 2006 − Rev. 3
C3
D3
D7
Symbol
C2
R3
A5
Rating
© Semiconductor Components Industries, LLC, 2006
B2
B4
MAXIMUM RATINGS (TA = 25°C)
B1
C2
D2
D5
EMI and USB Filtering and ESD Protection for Data Lines
Cell Phones
Handheld Portables
Notebook Computers
MP3 Players
R7
R2
A2
Typical Applications
•
•
•
•
•
C1
C1
D1
1
A1
È
È
MARKING DIAGRAM
4107
= Device Code
A
= Assembly Location
4107AYWW G
Y
= Year
G
WW
= Work Week
G
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
Device
Package
Shipping†
NUF4107FCT1
Flip−Chip
3000 Tape & Reel
NUF4107FCT1G
Flip−Chip
(Pb−Free)
3000 Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
Publication Order Number:
NUF4107FC/D
NUF4107FC
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Characteristic
Symbol
VBR
IR = 1.0 mA
Min
Typ
Max
Unit
6.0
6.8
8.0
V
IR
VRM = 3.3 V per line
−
−
0.1
mA
R3 − R6
EMI Filter Resistors
80
100
120
W
R1, R2
USB Resistors; Impedance Matching
18
22
26
W
1250
1500
1750
W
At 2.5 V Bias
48
60
72
pF
C1, C2
At Pins A1 and A2; At 2.5 V Bias
29
36
43
pF
Cpower
At Pins B2; At 2.5 V Bias
54
68
82
pF
R7
Cline
USB Pull−up; Speed Detection Resistor
http://onsemi.com
2
NUF4107FC
TYPICAL CHARACTERISTICS
110
25
108
24
106
RESISTANCE
RESISTANCE
23
22
21
104
102
100
98
96
94
20
92
19
−40
−20
0
20
40
60
90
−40
80 85
0
20
40
80 85
60
TEMPERATURE °C
TEMPERATURE °C
Figure 1. USB 1.1 Resistors (R1, R2) vs. Temperature
Figure 2. Data Resistors (R3, R4, R5, R6)
vs. Temperature
0
1600
1580
USB1
−10
1560
1540
RESISTANCE
−20
S21 (dB)
1520
1500
1480
USB2
−30
−40
1460
1440
Test Conditions:
Pins B1, B2 floating
Vline = 0 V
−50
1420
1400
−40
−20
0
20
40
60
−60
80 85
1
10
TEMPERATURE °C
0
0
−5
−10
−10
−25
−30
−40
USB1 − USB2
−50
USB2 − EMI3
−60
−35
Test Conditions:
Pins B1, B2 floating
Vline = 0 V
−40
−45
−50
−30
S41 (dB)
−20
1
10
EMI5
EMI4
EMI3 − EMI4
−70
EMI6
100
1000
FREQUENCY (MHz)
10,000
Test Conditions:
Pins B1, B2 floating
Vline = 0 V
−20
EMI3
−15
100
1000
FREQUENCY (MHz)
Figure 4. Insertion Loss Characteristic
USB1, USB2
Figure 3. Pull−up Resistor (R7) vs. Temperature
S21 (dB)
−20
EMI5 − EMI6
−80
−90
10,000
EMI4 − EMI5
1
Figure 5. Insertion Loss Characteristic
EMI3, EMI4, EMI5, EMI6
10
100
1000
FREQUENCY (MHz)
Figure 6. Analog Crosstalk Curve
EMI Filter
http://onsemi.com
3
10,000
NUF4107FC
Printed Circuit Board Recommendations
500 mm Pitch
300 mm Solder Ball
Parameter
PCB Pad Size
250 mm +25
250 mm −0
Pad Shape
Round
Pad Type
NSMD
Solder Mask Opening
350 mm ±25
Solder Stencil Thickness
125 mm
Stencil Aperture
250 x 250 mm sq.
Solder Flux Ratio
50/50
Solder Paste Type
No Clean Type 3 or Finer
Trace Finish
OSP Cu
Trace Width
150 mm Max
Copper
Solder Mask
NSMD
SMD
Figure 7. Solder Mask versus Non−Solder Mask Definition
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
−
Tp = (15−30 sec)
Tp = 260°C − 5°C
RAMP−UP
tL
(60−90 sec)
RAMP−DOWN
PRE−HEAT
ZONE
0−
15 −
30 −
45 −
60 −
75 −
90 −
105 −
119 −
134 −
149 −
165 −
180 −
195 −
209 −
224 −
239 −
254 −
269 −
284 −
299 −
314 −
329 −
344 −
359 −
374 −
389 −
404 −
419 −
434 −
449 −
464 −
479 −
494 −
TEMPERATURE (°C)
280
270
260
250
240
230
TL= 217 210
200
190
180
170
160
150
140
130
120
110
100
90
80
70
60
50
40
30
20
10
0
TIME (seconds)
Figure 8. Typical Pb−Free Solder Heating Profile
http://onsemi.com
4
NUF4107FC
PACKAGE DIMENSIONS
FLIP−CHIP−17 CSP
CASE 499AD−01
ISSUE A
4X
0.10 C
TERMINAL A1
LOCATOR
ÈÈ
ÈÈ
D
A
B
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETER.
3. COPLANARITY APPLIES TO SPHERICAL
CROWNS OF SOLDER BALLS.
E
TOP VIEW
A1
0.10 C
A2
0.05 C
SIDE VIEW
C
A
DIM
A
A1
A2
D
E
b
e
e1
D1
E1
MILLIMETERS
MIN
MAX
0.740
−−−
0.250
0.310
0.380
0.430
2.960 BSC
1.330 BSC
0.350
0.410
0.500 BSC
0.435 BSC
2.500 BSC
0.870 BSC
SEATING
PLANE
D1
e /2
e
C
17 X
b
0.05 C A B
0.03 C
B
e1
A
1
2
3
4
5
E1
6
BOTTOM VIEW
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer
purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 61312, Phoenix, Arizona 85082−1312 USA
Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada
Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Phone: 81−3−5773−3850
http://onsemi.com
5
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
For additional information, please contact your
local Sales Representative.
NUF4107FC/D
Similar pages