AT73C212 - Mature

Features
•
•
•
•
•
•
•
•
300 mA/1.9V/2.5V DC to DC Converter
80 mA/2.8V Dual-mode LDO Regulator (LDO1)
130 mA/2.7V/2.8V LDO Regulator (LDO2)
130 mA/2.8V LDO Regulator (LDO3)
130 mA/2.8V LDO Regulator (LDO4)
10 mA/1.8/2.8V Dual-mode LDO Regulator (LDO5)
Available in a 5 mm x 5 mm 32-pin QFN or 5 mm x 5 mm 32-ball BGA Package
Applications: Mobile Phones, Digital Cameras, PDAs, SmartPhones, DECT Phones,
Handset Devices
Description
The AT73C212 provides a power management solution for integration of multimedia
features in mid-level mobile phone handsets. These features may include a camera
module (CMOS or CCD), audio generators for a polyphonic or MP3 ringer, a co-processor for JPEG encoding and an external memory module.
The AT73C212 contains six power supplies: five linear voltage regulators providing
output voltage from 1.8V to 2.8V and output current from 10 mA to 130 mA and a DC DC converter supplying 300 mA from 1.9V or 2.5V.
Power
Management for
Mobiles (PM)
AT73C212
The device is available in two compact, space-saving package options: 32-ball BGA or
32-pin QFN.
2743A–PMGMT–05/04
Block Diagram
Figure 1. AT73C212 Block Diagram
AT73C212
CREF
Internal
High Accuracy
Oscillator
DC - DC Buck
1.9V or 2.5V
300 mA
Internal
Voltage
Reference
LDO1
2.8V
80 mA
VOUT0
VOUT1
High Power/Low Power
DM
LDO2
2.7V or 2.8V
130 mA
VOUT2
LDO3
2.8V
130 mA
VOUT3
LDO4
2.8V
130 mA
VOUT4
DV
Main Battery
VBAT
LDO5
1.8V or 2.8V
10 mA
VOUT5
High Power/Low Power
Absolute Maximum Ratings
Storage Temperature ..................................... -55°C to +150°C
Operating Temperature.................................... -40°C to +85°C
Power Supply Input..............................................-0.3V to 5.5V
IO Input (all except power supply) ......................... -0.3 to 2.8V
2
*NOTICE:
Stresses beyond those listed under “Absolute
Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and
functional operation of the device at these or
other conditions beyond those indicated in the
operational sections of this specification is not
implied. Exposure to absolute maximum rating
conditions for extended periods may affect
device reliability.
AT73C212
2743A–PMGMT–05/04
AT73C212
Pin List
Table 1. Pin List
Ball
Signal
Type
A1
VOUT4
O
A2
GNDB
Ground
LDO3 and LDO4 ground
A3
VINC
Supply
LDO3 and LDO4 input supply
A4
GNDD
Ground
Digital ground
A5
VINB
Supply
LDO1 and LDO2 input supply
A6
VINT
O
A7
GNDE
Ground
B1
VOUT3
O
LDO3 output voltage
B2
EN3
I
Enable LDO3
B3
Description
LDO4 output voltage
Decoupling capacitor for internal voltage supply
LDO1 and LDO2 ground
Not connected
B4
VOUT2
O
LDO2 output voltage
B5
EN2
I
Enable LDO2
B6
VOUT1
O
LDO1 output voltage
B7
C1
Not connected
GNDF
Ground
C2
Analog ground
Not connected
C3
GNDG
Ground
Analog ground
C4
EN4
I
Enable LDO4
C5
GNDH
Ground
Analog ground
C6
GNDI
Ground
Analog ground
C7
CAP
O
D1
GNDC
Ground
Decoupling capacitor for voltage reference
LDO5 ground
D2
Not connected
D3
Not connected
D4
DV
I
Programmable Voltage Selection
D5
ON
I
Switch on PMU
D6
Not connected
D7
VIND
Supply
LDO5 input supply
E1
VINE
Supply
Battery voltage
E2
Not connected
E3
Not connected
E4
Not connected
E5
GNDL
Ground
Analog ground
E6
EN5
I
Enable LDO5
3
2743A–PMGMT–05/04
Table 1. Pin List
4
Ball
Signal
Type
E7
VOUT5
O
Description
LDO5 output voltage
F1
Not connected
F2
Not connected
F3
Not connected
F4
Not connected
F5
Not connected
F6
Reset
O
PMU start up OK
F7
LX
I
Inductor connection
G1
Not connected
G2
Not connected
G3
Not connected
G4
VOUT0
O
DCDC output voltage
G5
DM
I
Dual power selection
G6
VINA
Supply
DCDC input supply
G7
GNDA
Ground
DCDC ground
AT73C212
2743A–PMGMT–05/04
AT73C212
DC to DC Electrical Characteristics
TAMB = - 20°C to 85°C, VBAT = 3V to 4.2V unless otherwise specified. COUT = 22µF - Tantalum - LOUT = 10 uH
Table 2. DC to DC Electrical Characteristics
Symbol
Parameter
Conditions
VBAT
Operating Supply Voltage
VOUT
Output Voltage
PWM Mode (DM = 0, DV = 0)
Overall accuracy
VOUT
Output Voltage
Initial Voltage after Trimming
VOUT
Output Voltage
PWM Mode (DV = 1, DM = 0)
IOUT
Output Current
PWM Mode (DM = 0)
ISD
Shut DownCurrent
Eff
Efficiency
IOUT = 10 mA to 200 mA @1.9V
∆VDCLD
Static Load Regulation
∆VTRLD
Min
Typ
3
1.80
1.90
Max
Unit
5.5
V
2.0
V
1.9 ± 2%
2.45
85
V
2.50
2.55
V
150
300
mA
0.1
1
µA
90
%
DC - DC Mode (10% to 90% of IOUT max)
DM = 0
7
mV
Transient Load Regulation
DC - DC Mode (10% to 90% of IOUT max)
TR =TF = 5 us; DM = 0
30
mV
∆VDCLE
Static Line Regulation
DC - DC Mode (10% to 90% of IOUT max,
3.2V to 4.2V) DM = 0
20
mV
∆VTRLE
Transient Line Regulation
DC - DC Mode (10% to 90% of IOUT max,
3.2V to 4.2V) DM = 0
35
mV
VOUT
Output Voltage
LDO Mode (DV = 0, DM = 1)
1.75
1.80
1.85
V
VOUT
Output Voltage
LDO Mode (DV = 1, DM = 1)
2.35
2.40
2.45
V
IOUT
Output Current
LDO Mode (DM = 1)
10
mA
VDROP
Dropout Voltage
LDO Mode (DM = 1)
400
mV
IQC
Quiescent Current
LDO Mode (DM = 1)
14
µA
∆VDCLD
Static Load Regulation
LDO Mode (0 to 10 mA); DM = 1
50
mV
∆VTRLD
Transient Load Regulation
LDO Mode (0 to 10 mA) , TR = TF = 5 µs,
DM = 1
10
mV
∆VDCLE
Static Line Regulation
LDO Mode (3.2V to 4.2V); DM = 1
8
mV
∆VTRLE
Transient Line Regulation
LDO Mode (3.2V to 4.2V); DM = 1
15
mV
PSRR
Ripple Rejection
LDO Mode up to 1KHz; DM = 1
∆VLPFP
Overshoot Voltage
Voltage drop from LDO (LP) to DC - DC (FP)
∆VFPLP
Undershoot Voltage
Voltage drop from DC - DC (FP) to LDO (LP)
11
40
45
0
dB
10
mV
- 15
0
mV
Min
Typ
Max
Unit
17
22
26
µF
100
mOhm
12
µH
1.1
Ohm
Table 3. DC to DC External Components
Symbol
Parameter
COUT
Output Capacitor Value
CESR
Output Capacitor ESR
LOUT
Output Inductor Value
LESR
Output Inductor ESR
Conditions
8
At 100 kHz
10
5
2743A–PMGMT–05/04
LDO1 Electrical Characteristics
TAMB = -20°C to 85°C, VBAT = 3V to 4.2V unless otherwise specified.
Table 4. LDO1 Electrical Characteristics
Symbol
Parameter
Conditions
Min
VBAT
Operating Supply Voltage
VOUT
Output Voltage Full Power Mode
DM = 0
2.7
VOUT
Output Voltage Low Power Mode
DM = 1
2.7
IOUT
Output Current Full Power Mode
DM = 0
IOUT
Output Current Low Power Mode
DM = 1
IQC
Quiescent Current FP Mode
DM = 0
25
IQC
Quiescent Current LP Mode
DM = 1
9
∆VOUT
Line Regulation FP Mode
∆VPEAK
Typ
Max
Unit
5.5
V
2.8
2.9
V
2.8
2.9
V
50
80
mA
10
mA
30
36
µA
11
13
µA
VBAT: 3.4V to 3V, IOUT = 80 mA, DM = 0
1
mV
Line Regulation Transient FP Mode
VBAT: From 5V to 5.4V and from 3.4V to
3V, IOUT = 80 mA, TR = TF = 5 µs, DM = 0
2.7
mV
∆VOUT
Line Regulation LP Mode
VBAT: 3.4V to 3V, IOUT = 5 mA, DM = 1
2
mV
∆VPEAK
Line Regulation Transient LP Mode
VBAT: From 5V to 5.4V and from 3.4V to
3V, IOUT = 5 mA, TR = TF = 5 µs, DM = 1
4
mV
∆VOUT
Load Regulation FP Mode
From 0 to 80 mA and from 90% to 10%
IOUT, VBAT = 3.4V, DM = 0
2.9
(4.2 at
5.5V)
mV
∆VPEAK
Load Regulation Transient FP Mode
From 0 to IOUT(MAX) and from 90% to 10%
IOUT(MAX), TR = TF = 5 µs, VBAT = 3.4V,
DM = 0
23
mV
∆VOUT
Load Regulation LP Mode
From 0 to 80 mA & from 90% to 10%
IOUT(MAX), VBAT = 3.4V, DM = 1
5
(7.8 at
5.5V)
mV
PSRR
Ripple Rejection
F = 217 Hz
VN
Output Noise FP mode
BW: 10 Hz to 100 kHz
80
µVRMS
VN
Output Noise LP Mode
BW: 10 Hz to 100 kHz
300
µVRMS
TR
Rise Time FP
IOUT = IOUT(MAX)
70
130
µs
TR
Rise Time LP
IOUT = IOUT(MAX)
50
170
µs
ISD
Shut Down Current
1
µA
ISC
Short Circuit Current
130
mA
3
40
45
100
dB
Table 5. LDO1 External Components
Symbol
Parameter
COUT
Output Capacitor Value
CESR
Output Capacitor ESR
6
Conditions
100 kHz
Min
Typ
Max
Unit
1.98
2.2
2.42
µF
50
mOhm
AT73C212
2743A–PMGMT–05/04
AT73C212
LDO2 Electrical Characteristics
TAMB = -20°C to 85°C, VBAT = 3V to 4.2V unless otherwise specified.
Table 6. LDO2 Electrical Characteristics
Symbol
Parameter
Conditions
Min
VBAT
Operating Supply Voltage
VOUT
Output Voltage
DV = 0
2.65
VOUT
Output Voltage
DV = 1
2.75
IOUT
Typ
Max
Unit
5.5
V
2.70
2.75
V
2.80
2.85
V
Output Current
80
130
mA
IQC
Quiescent Current
195
236
µA
∆VOUT
Line Regulation
VBAT: 3V to 3.4V, IOUT = 130 mA
1
2
mV
∆VPEAK
Line Regulation Transient
Same as above, TR = TF = 5 µs
1.5
2.85
mV
∆VOUT
Load Regulation
10% - 90% IOUT; VBAT = 3V
1
mV
10% - 90% IOUT; VBAT = 5.0V
1
mV
10% - 90% IOUT; VBAT = 5.5V
1
mV
3
∆VPEAK
Load Regulation Transient
Same as above, TR = TF = 5 µs
1.2
2.4
mV
PSRR
Ripple rejection
F = 217 Hz, VBAT = 3.6V
70
73
dB
VN
Output Noise
BW: 10 Hz to 100 kHz
29
37
µVRMS
TR
Rise Time
100% IOUT, 10% - 90% VOUT
50
µs
ISD
Shut Down Current
1
µA
Table 7. LDO2 External Components
Symbol
Parameter
COUT
Output Capacitor Value
CESR
Output Capacitor ESR
Conditions
100 kHz
Min
Typ
Max
Unit
1.98
2.2
2.42
µF
50
mOhm
7
2743A–PMGMT–05/04
LDO3 Electrical Characteristics
TAMB = -20°C to 85°C, VBAT = 3V to 4.2V unless otherwise specified.
Table 8. LDO3 Electrical Characteristics
Symbol
Parameter
VBAT
Operating Supply Voltage
VOUT
Output Voltage
IOUT
Conditions
Min
Typ
Max
Unit
5.5
V
2.8
2.86
V
Output Current
80
130
mA
IQC
Quiescent Current
195
236
µA
∆VOUT
Line Regulation
VBAT: 3V to 3.4V, IOUT = 130 mA
1
2
mV
∆VPEAK
Line Regulation Transient
Same as above, TR = TF = 5 µs
1.5
2.85
mV
∆VOUT
Load Regulation
10% - 90% IOUT; VBAT = 3V
1
mV
10% - 90% IOUT; VBAT = 5.0V
1
mV
10% - 90% IOUT; VBAT = 5.5V
1
mV
2.4
mV
3
2.74
∆VPEAK
Load Regulation Transient
Same as above, TR = TF = 5 µs
PSRR
Ripple rejection
F = 217 Hz, VBAT = 3.6V
VN
Output Noise
BW: 10 Hz to 100 kHz
TR
Rise Time
100% IOUT, 10% - 90% VOUT
ISD
Shut Down Current
1.2
70
73
29
dB
37
µVRMS
50
µs
1
µA
Table 9. LDO3 External Components
Symbol
Parameter
COUT
Output Capacitor Value
CESR
Output Capacitor ESR
8
Conditions
100 kHz
Min
Typ
Max
Unit
1.98
2.2
2.42
µF
50
mOhm
AT73C212
2743A–PMGMT–05/04
AT73C212
LDO4 Electrical Characteristics
TAMB = -20°C to 85°C, VBAT = 3V to 4.2V unless otherwise specified.
Table 10. LDO4 Electrical Characteristics
Symbol
Parameter
VBAT
Operating Supply Voltage
VOUT
Output Voltage
IOUT
Conditions
Min
Typ
3
Max
Unit
5.5
V
2.8
2.86
V
Output Current
80
130
mA
IQC
Quiescent Current
195
236
µA
∆VOUT
Line Regulation
VBAT: 3V to 3.4V, IOUT = 130 mA
1
2
mV
∆VPEAK
Line Regulation Transient
Same as above, TR = TF = 5 µs
1.5
2.85
mV
∆VOUT
Load Regulation
10% - 90% IOUT; VBAT = 3V
1
mV
10% - 90% IOUT; VBAT = 5.0V
1
mV
10% - 90% IOUT; VBAT = 5.5V
1
mV
2.4
mV
2.74
∆VPEAK
Load Regulation Transient
Same as above, TR = TF = 5 µs
PSRR
Ripple rejection
F = 217 Hz, VBAT = 3.6V
VN
Output Noise
BW: 10 Hz to 100 kHz
TR
Rise Time
100% IOUT, 10% - 90% VOUT
ISD
Shut Down Current
1.2
70
73
29
dB
37
µVRMS
50
µs
1
µA
Table 11. LDO4 External Components
Symbol
Parameter
COUT
Output Capacitor Value
CESR
Output Capacitor ESR
Conditions
100 kHz
Min
Typ
Max
Unit
1.98
2.2
2.42
µF
50
mOhm
9
2743A–PMGMT–05/04
LDO5 Electrical Characteristics
TAMB = -20°C to 85°C, VBAT = 3V to 4.2V unless otherwise specified.
Table 12. LDO5 Electrical Characteristics
Symbol
Parameter
Conditions
Min
VBAT
Operating Supply Voltage
VOUT
Output Voltage
IOUT < 10mA, DV = 0
1.71
VOUT
Output Voltage
IOUT < 10 mA, DV = 1
2.74
ISD
Shut Down Current
IQC
Typ
Max
Unit
5.5
V
1.8
1.89
V
2.8
2.86
V
0.1
1
µA
Low Power Quiescent Current
8
9.5
µA
IOUT
Output Current
10
ISC
Short Circuit Current
3
mA
40
mA
Table 13. LDO5 External Components
Symbol
Parameter
COUT
Output Capacitor Value
CESR
Output Capacitor ESR
10
Conditions
100 kHz
Min
Typ
Max
Unit
198
220
242
nF
50
mOhm
AT73C212
2743A–PMGMT–05/04
Atmel Corporation
2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: 1(408) 441-0311
Fax: 1(408) 487-2600
Regional Headquarters
Europe
Atmel Sarl
Route des Arsenaux 41
Case Postale 80
CH-1705 Fribourg
Switzerland
Tel: (41) 26-426-5555
Fax: (41) 26-426-5500
Asia
Room 1219
Chinachem Golden Plaza
77 Mody Road Tsimshatsui
East Kowloon
Hong Kong
Tel: (852) 2721-9778
Fax: (852) 2722-1369
Japan
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
Japan
Tel: (81) 3-3523-3551
Fax: (81) 3-3523-7581
Atmel Operations
Memory
2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: 1(408) 441-0311
Fax: 1(408) 436-4314
RF/Automotive
Theresienstrasse 2
Postfach 3535
74025 Heilbronn, Germany
Tel: (49) 71-31-67-0
Fax: (49) 71-31-67-2340
Microcontrollers
2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: 1(408) 441-0311
Fax: 1(408) 436-4314
La Chantrerie
BP 70602
44306 Nantes Cedex 3, France
Tel: (33) 2-40-18-18-18
Fax: (33) 2-40-18-19-60
ASIC/ASSP/Smart Cards
1150 East Cheyenne Mtn. Blvd.
Colorado Springs, CO 80906, USA
Tel: 1(719) 576-3300
Fax: 1(719) 540-1759
Biometrics/Imaging/Hi-Rel MPU/
High Speed Converters/RF Datacom
Avenue de Rochepleine
BP 123
38521 Saint-Egreve Cedex, France
Tel: (33) 4-76-58-30-00
Fax: (33) 4-76-58-34-80
Zone Industrielle
13106 Rousset Cedex, France
Tel: (33) 4-42-53-60-00
Fax: (33) 4-42-53-60-01
1150 East Cheyenne Mtn. Blvd.
Colorado Springs, CO 80906, USA
Tel: 1(719) 576-3300
Fax: 1(719) 540-1759
Scottish Enterprise Technology Park
Maxwell Building
East Kilbride G75 0QR, Scotland
Tel: (44) 1355-803-000
Fax: (44) 1355-242-743
Literature Requests
www.atmel.com/literature
Disclaimer: Atmel Corporation makes no warranty for the use of its products, other than those expressly contained in the Company’s standard
warranty which is detailed in Atmel’s Terms and Conditions located on the Company’s web site. The Company assumes no responsibility for any
errors which may appear in this document, reserves the right to change devices or specifications detailed herein at any time without notice, and
does not make any commitment to update the information contained herein. No licenses to patents or other intellectual property of Atmel are
granted by the Company in connection with the sale of Atmel products, expressly or by implication. Atmel’s products are not authorized for use
as critical components in life support devices or systems.
© Atmel Corporation 2004. All rights reserved. Atmel ® and combinations thereof are the registered trademarks of Atmel Corporation or its
subsidiaries. Other terms and product names may be the trademarks of others.
Printed on recycled paper.
2743A–PMGMT–05/04
Similar pages