5 Pin Flip-Chip CSP

MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
5 PIN FLIP CHIP CSP
CASE 766AB-01
ISSUE O
DATE 04 JUNE 2003
SCALE 4:1
D
4X
0.10 C
A
È
È
TERMINAL A1
LOCATOR
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. COPLANARITY APPLIES TO SPHERICAL
CROWNS OF SOLDER BALLS.
B
E
A1
0.10 C
A2
A
C
0.05 C
SEATING
PLANE
D1
DIM
A
A1
A2
D
E
b
e
f
D1
MILLIMETERS
MIN
MAX
--0.680
0.210
0.270
0.380
0.430
1.330 BSC
0.960 BSC
0.290
0.340
0.500 BSC
0.433 BSC
0.866 BSC
GENERIC
DEVICE MARKING
ÈÈ
ÈÈ
f
5X
b
0.05 C A B
0.03 C
DOCUMENT NUMBER:
1
2
e
3
A
B
98AON12900D
C
Electronic versions are uncontrolled except when
accessed directly from the Document Repository. Printed
STATUS: ON SEMICONDUCTOR STANDARD
http://onsemi.com versions are uncontrolled except when stamped
“CONTROLLED COPY” in red.
1
NEW STANDARD:
 Semiconductor Components Industries, LLC, 2002
Case Outline Number:
http://onsemi.com
5 PIN FLIPCHIP CSP
October, DESCRIPTION:
2002 - Rev. 0
PAGE 1 OFXXX
2
1
DOCUMENT NUMBER:
98AON12900D
PAGE 2 OF 2
ISSUE
O
REVISION
RELEASED FOR PRODUCTION. REQ. BY R. PERINA
DATE
04-JUN-2003
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make
changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all
liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death
may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indem nify and hold SCILLC and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
http://onsemi.com
 Semiconductor Components Industries, LLC, 2003
June, 2003 - Rev. 01O
2
Case Outline Number:
766AB
Similar pages