Download SITRANS F C MASS 6000 Ex d Catalog Specification Sheet

© Siemens AG 2016
Flow Measurement
SITRANS F C
Transmitter MASS 6000 Ex d compact/remote
■ Overview
3
MASS 6000 is based on digital signal processing technology –
engineered for high performance, fast flow step response, fast
batching applications, high immunity against process noise,
easy to install, commission and maintain.
The MASS 6000 transmitter delivers true multiparameter measurements i.e.: Mass flow, volume flow, density, temperature and
fraction flow.
The MASS 6000 Ex d transmitter is manufactured in stainless
steel (AISI 316L/1.4404) and able to withstand harsh installation
conditions in hazardous applications within the process and
chemical industry. The conservative choice of material guarantees the user a low cost of ownership and a long trouble-free lifetime.
The Ex d can be compact mounted on all sensors of type
MASS 2100 DI 3 to DI 15, and can be used in remote version for
all types of MASS 2100. MASS 6000 Ex d cannot be combined
with MC2 sensors.
■ Benefits
• Fully stainless steel flameproof Ex d enclosure, ensuring optimum cost of ownership
• Intrinsically safe keypad and display directly programmable in
hazardous area
• Ex-approved transmitter which can be mounted in hazardous
area Zone 1 or Zone 2.
• Sensor and transmitter interface intrinsically safe Ex ia IIC
• Exchange of transmitter directly in hazardous area without
shut-down of process pipe line due to ia IIC sensor/transmitter
interface.
• Dedicated mass flow chip with the latest ASIC technology
• Fast batching and flow step response with an update rate of
true 30 Hz
• Superior noise immunity due to a DFT (Discrete Fourier Transformation) algorithm
• Front end resolution better than 0.35 ns improves zero point
stability and enhances dynamic turn-down ratio on flow and
density accuracy.
• Advanced diagnosis and service menu enhances troubleshooting and meter verification.
• Built-in batch controller with compensation and monitoring
comprising 2 built-in totalizers
• Multi-parameter outputs, individual configurable for mass
flow, volume flow, density, temperature or fraction flow such as
Brix or Plato
• 1 current output, 1 frequency/pulse and 1 relay as standard
output
• Current output can be selected as passive or active output
3/196
Siemens FI 01 · 2016
• Digital input for batch-control, remote zero adjust or forced
output mode
• All outputs can be forced to preset value for simulation, verification or calibration purposes.
• User-configurable operation menu with password protection
- 3 lines, 20 characters display in 11 languages
- Self-explaining error handling/log in text format
- Keypad can be used for controlling batch as
start/stop/hold/reset
• SENSORPROM technology automatically configures transmitter at start-up providing:
- Factory pre-programming with calibration data, pipe size,
sensor type, output settings
- Any values or settings changed by users are stored automatically
- Automatically re-programming any new transmitter without
loss of accuracy
- Transmitter replacement in less than 5 minutes. True "plug &
play"
• Fraction flow computation based on a 3rd-order algorithm
matching all applications
• USM II platform enables fitting of add-on bus modules without
loss of functionality:
- All modules can be fitted as true "plug & play"
- Module and transmitter automatically configured through the
SENSORPROM
• Installation of the transmitter to the sensor is simple "plug &
play" via the sensor pedestal.
■ Application
SITRANS F C mass flowmeters are suitable for all applications
within the entire process industry where there is a demand for
accurate flow measurement in hazardous area. The meter can
measure both liquids and gases.
The main applications for the MASS 6000 Ex d transmitter can
be found in:
• Chemical process industry
• Pharmaceutical industries
• Automotive industry
• Oil and gas industry
• Power generation and utility industry
■ Design
The transmitter is designed in an Ex d compact stainless steel
enclosure which can be compact mounted on the MASS 2100
sensor range DI 3 to DI 15, and remote mounted for the entire
sensor series except MC2.
The MASS 6000 Ex d is available as standard with 1 current,
1 frequency/pulse and 1 relay output and can be fitted with addon modules for bus communication.
• Flameproof „d“ enclosure
• Enclosure stainless steel, IP67/NEMA 6 as compact and IP65
as remote
• Supply voltage 24 V AC/DC
• MASS 6000 Ex d is Ex-approved together with all MASS 2100
sensors, but can not be used together with MC2 Ex versions
© Siemens AG 2016
Flow Measurement
SITRANS F C
Transmitter MASS 6000 Ex d compact/remote
■ Function
The following functions are available:
• Mass flow rate, volume flow rate, density, temperature, fraction
flow
• 1 current output, 1 frequency/pulse output, 1 relay output,
1 digital input
• All outputs can be individually configured with mass, volume,
density etc.
• 2 built-in totalizers which can count positive, negative or net
• Low flow cut-off
• Density cut-off or empty pipe cut-off, adjustable
• Flow direction
• Error system consisting of error-log, error pending menu
• Operating time
• Uni/bidirectional flow measurement
• Limit switches with 1 or 2 limits, programmable for flow, density or temperature
• Noise filter setting for optimization of measurement performance under non-ideal application conditions
• Full batch controller
• Automatic zero adjustment menu, with zero point evaluation
feed back
• Full service menu for effective and straight forward application
and meter troubleshooting
Mass flow [kg/s (lb/min)],
volume flow [l/s (gpm)],
fraction [%], °Brix,
density [kg/m3 (lb/ft3)],
temperature [°C (°F)]
Current output
Classified Ex ia, selectable as
active or passive outputs. Default
setting is active mode.
Current
0 ... 20 mA or 4 ... 20 mA
Load
< 350 
Time constant
0 ... 99.9 s adjustable
Current characteristics
Active mode
Passive mode (max input from
external barrier)
11 ... 30 V DC (Ri = 13.6 k
Start/hold/continue batch, zero
point adjust, reset totalizer 1/2,
force output, freeze output
Output characteristics
Ui = 30 V, Ii = 3.45 mA,
Pi = 0.10 W, Ci = 0 nF, Li = 0 mH
Galvanic isolation
All inputs and outputs are galvanically isolated.
Isolation voltage:
• 500 V to supply
• 50 V between outputs
Cut-off
Low-flow
0 ... 9.9 % of maximum flow
Empty pipe
Detection of empty sensor
Density
0 ... 2.9 g/cm3
Totalizer
Two eight-digit counters for forward, net or reverse flow
Display
• Background illumination with alphanumerical text, 3  20 characters to indicate flow rate,
totalized values, settings and
faults. Time constant as current
output
• Reverse flow indicated by negative sign
Zero point adjustment
Via keypad or remote via digital
input
Ambient temperature
■ Technical specifications
Measurement of
Digital input
Functionality
Operation
-20 ... +50 °C (-4 ... +122 °F)
Storage
-40 ... +70 °C (-40 ... +158 °F)
(Humidity max. 95 %)
Communication
Add-on modules: HART,
PROFIBUS PA,
FOUNDATION Fieldbus H1
HART
Active mode
Uo = 6.88 V, Io = 330 mA,
Po = 0.57 W, Co = 20 nF,
Lo = 100 H
Passive mode (max input from
external barrier)
Ui = 10 V, Ii = 200 mA, Pi = 0.5 W,
Ci = 0 nF, Li = 0 H
PROFIBUS PA
Uo = 24 V, Io = 82 mA,
Po = 0.5 W, Co = 125 nF,
Lo = 2.5 mH
Ui = 30 V, Ii = 100 mA,
Pi = 0.75 W, Ci = 52 nF,
Li = 100 H
Digital output
Active mode
Not available
Passive mode
Ui = 17.5 V, Ii = 380 mA,
Pi = 5.32 W, Ci = 5 nF, Li = 10 H
FOUNDATION Fieldbus H1
Active mode
Not available
Passive mode
Ui = 17.5 V, Ii = 380 mA
Frequency
0 ... 10 kHz, 50 % duty cycle
Time constant
0.1 ... 30 s adjustable
Material
Stainless steel AISI 316/1.4435
Passive
6 ... 30 V DC, max. 110 mA,
1 K  Rload  10 k
Rating
• Compact mounted on sensor:
IP67/NEMA 4X
• Remote mounted: IP65
Active mode
Not available
Load
Passive mode (max input from
external barrier)
Ui = 30 V, Ii = 100 mA,
Pi = 0.75 W, Ci = 52 nF,
Li = 100 H
18 ... 1000 Hz random,
1.14 g RMS, in all directions, to
IEC 68-2-36, Curve E
Enclosure
Output characteristics
Relay
Type
Change-over relay
Load
30 V/100 mA
Functionality
Error level, error number, limit,
direction
Output characteristics
Ui = 30 V, Ii = 100 mA,
Pi = 0.75 W, Ci = 0 nF, Li = 0 mH
Siemens FI 01 · 2016
3/197
3
© Siemens AG 2016
Flow Measurement
SITRANS F C
Transmitter MASS 6000 Ex d compact/remote
Supply voltage
Selection and Ordering data
Article No.
24 V AC
SITRANS F C MASS 6000 transmitter
Transmitter Ex d for remote mounting inclusive of
wall mounting kit
7ME 4 1 1 0 -
• Range
20 ... 30 V AC
• Power consumption
6 VA IN = 250 mA, IST = 2 A
(30 ms)
• Power supply
The power supply shall be from a
safety isolating transformer. Maximal cable core is 1.5 mm2
Enclosure
Ex d SS with 5 m (16.5 ft) cable
Ex d SS with 10 m (32.8 ft) cable
Ex d SS with 25 m (82.0 ft) cable
• Range
18 ... 30 V DC
• Power consumption
6 W IN = 250 mA, IST = 2 A
(30 ms)
Output configuration
1 current, 1 frequency, 1 relay
24 V DC
3
• Power supply
The power supply shall be from a
safety isolating transformer. Maximal cable core is 1.5 mm2.
EMC performance
Emission
EN 55011/CISPR-11 (Class A)
Immunity
EN/IEC 61236-1 (Industry)
NAMUR
Within the value limits according
to "Allgemeine Anforderung" with
error criteria A in accordance with
NE 21
Ex approval
ATEX, EAC Ex:
Ex d e ib [ia Ga] IIC T4 Gb
2 7777 - 77A7
Click on the Article No. for the online configuration in the PIA Life Cycle Portal.
G
H
J
A
Supply voltage
24V AC/DC
2
Ex approvals
Ex
1
Display/Keypad
With display
1
Serial communication
No communication
HART
PROFIBUS PA Profile 3
FOUNDATION Fieldbus H1
A
B
F
J
Cable gland
M20
1
Operating instructions for SITRANS F C MASS 6000 Ex d
Description
Article No.
• English
A5E02944883
This device is shipped with a Quick Start guide and a CD containing
further SITRANS F iterature.
All literature is available to download for free, in a range of languages, at
www.siemens.com/processinstrumentation/documentation
Note:
Only communication modules with Ex approvals are allowed.
3/198
Siemens FI 01 · 2016
© Siemens AG 2016
Flow Measurement
SITRANS F C
Transmitter MASS 6000 Ex d compact/remote
■ Selection and Ordering data
■ Dimensional drawings
MASS 6000 Ex d compact version
Accessories
Add-on module for remote and compact MASS 6000 Ex d
Ø130 (5.12)
Article No.
HART (Ex-i)
FDK:085U0226
PROFIBUS PA Profile 3 (Ex-i)
FDK:085U0236
FOUNDATION Fieldbus H1
(Ex-i)
A5E02054250
255.1 (10.04)
H6
Description
3
Description
Article No.
HART
• English
A5E03089708
PROFIBUS PA/DP
• English
• German
A5E00726137
A5E01026429
FOUNDATION Fieldbus
• English
• German
A5E02318728
A5E02488856
H5
Operating instructions for SITRANS F add-on modules
L3
DImensions in mm (inch)
Sensor size L3
H5
H6
[Di (inch)]
[mm (inch)] [mm (inch)] [mm (inch)]
This device is shipped with a Quick Start guide and a CD containing
further SITRANS F C literature.
All literature is available to download for free, in a range of languages, at
www.siemens.com/processinstrumentation/documentation
H5 + H6
[mm (inch)]
3 (1/8)
75 (2.95)
82 (3.23)
247 (9.72)
329 (12.95)
6 (¼)
62 (2.44)
72 (2.83)
257 (10.12)
329 (12.95)
15 (½)
75 (2.95)
87 (3.43)
267 (10.51)
354 (13.94)
25 (1)
75 (2.95)
173 (6.81)
271 (10.67)
444 (17.48)
40 (1½)
75 (2.95)
227 (8.94)
271 (10.67)
498 (19.61)
MASS 6000 Ex d remote version
60
40
2.36
1.57
5.91
M5
0.39
1.1
0.35
3.94
10
150
100
28
9
4xØ9
10
176 (6.93)
Dimensions in inch
2xØ9
336 (13.23)
Dimensions in mm
Ø13
130 (5.12)
255 (10.04)
Weight: 3 kg (6.6 lbs)
M5
Ø0.51
4xØ0.35
0.39
2xØ0.35
8 (0.31)
Dimensions in mm (inch)
Siemens FI 01 · 2016
3/199
© Siemens AG 2016
Flow Measurement
SITRANS F C
Transmitter MASS 6000 Ex d compact/remote
■ Schematics
Electrical connection compact or remote
+D]DUGRXVORFDWLRQ
1RQKD]DUGRXVORFDWLRQ
7UDQVPLWWHU
1+
9'&
9$&
3
2PE
&XUUHQW
RXWSXW
PE
PE
31
PE
P$
/RDGื˖
32
5HOD\
44
45
5HOD\VKRZQLQGHHQHUJLVHGFRQGLWLRQ
46
5HOD\
9$&P$
9'&P$
3DVVLYHRXWSXW
PD[9P$
56
57
58
77
'LJLWDOLQSXW
9'&
78
91
92
95
7HUPLQDOVIRU$GGRQPRGXOH
)RUHOHFWULFDOFRQQHFWLRQ
SOHDVHUHIHUWRGRFXPHQWDWLRQ
VXSSSOLHGZLWKWKH$20
96
0$66)&
0$66([G
0$66
81
'ULYHU
82
%URZQ
5HG
83
84
2UDQJH
<HOORZ
89
90
85
3LFNXS
86
3LFNXS
3/200
88
Siemens FI 01 · 2016
4
:KLWH
%ODFN
*UHHQ
%OXH
5
6
9
0
87
3
9
0
7(036(16(287
2
9
0
7(036(16(,1
1
9LROHW
*UD\
7
8
Similar pages