Download

Contents
Stripping
Stripping
Stripping
Introduction
C.2
Stripping and cutting tools
C.4
Sheathing strippers
C.12
C
2021630000
C.1
Introduction
Stripping
Stripping
After a conductor has been cut it is then prepared for
the next step or for crimping. For this purpose, a specific
length of the conductor insulation has to be removed, while
preventing damage to the conductor. The length of the
conductor insulation to be removed depends on the terminal
clamping point or the crimp to be processed.
C
Professional stripping tools guarantee perfect results due
to precise adjustment of the tool to the corresponding
insulation and the conductor cross-section.
Precision tools by Weidmüller guarantee that the user will
always obtain consistent, reliable stripping results.
“Stripping” means the cutting and removal of the insulation.
The following must be ensured in performing this task.
The stripping dimension must be observed and neither the
conductor nor the remaining insulation must be damaged.
To avoid mistakes, use a stripping tool matched to the
insulation and cross-section of the conductor.
C.2
Do not use work knives or penknives because the stripping
quality when using such tools depends entirely on the
manual dexterity of the user. The quality is not consistent,
even when the user is highly skilled.
Preference should be given to hand-operated tools that
adjust automatically to the corresponding cross-section of
the conductor. They do not damage to the conductor during
stripping and avoid faults.
stripax® stripping tools guarantee a consistent stripping
result which complies with DIN regulations. The tools are
rated for standard dimension PVC insulation. Any PVC
insulation thicknesses deviating from normal can be set
manually. The conductor stopper and integrated wire cutter
allow highly versatile use of the tools.
Special insulation types such as Teflon, Silicone and
Kapton require special stripping tools. These tools strip the
conductor with punch blades.
2021630000
Stripping
Introduction
C
DIN IEC 60352 part 2 contains references to stripping
faults which must be avoided:
Correctly stripped
conductor
Possible faults during stripping:
2021630000
The conductor insulation
has been damaged by the
stripping tool
Single conductors have been
damaged or cut off by the
stripping tool
Insulation has not been
cut properly
Single conductors have been
twisted too tightly afterwards
Remains of the conductor
insulation are still to be found
on the stripped conductor
Single conductors are no
longer twisted.
C.3
Stripping and cutting tools
Stripping
Stripping and cutting tools
C
• For flexible and solid conductors
• Double-insulated cables in two process steps without
special adjustment
• Automatic opening of clamping jaws after stripping
• No play in self-adjusting cutting unit
• Long service life
• No fanning-out of individual conductors
• Optimised ergonomic design
• Stripping length adjustable via end stop
• Adjustable to diverse insulation thicknesses
• Selectable partial stripping
• Removable handle shells
• Fold-out cutting protection
• Personalised marking with ESG device marker
Technical data
Max. stripping performance
Cable type
Wire cross-section, min. / max.
Stripping length, max.
Cutting performance
Conductor cross-section (cutting capacity)
Tool data
Length
Weight
Note
Ordering data
Version
Note
Accessories
Note
C.4
stripax®
stripax®16
0.08...10 mm²
6...16 mm²
• Stripping: PVC-insulated flexible conductors, ranging
from 0.08...10 mm² (~AWG 28...7)
• Cutting: PVC-insulated flexible conductors, ranging from
0.08...6 mm² (~AWG 28...7)
• Processing of multi-conductors, with thin flat ribbon
cables even several conductors in one operation
• No damage to the conductors due to special, selfadjusting stripping blades
• Stripping: PVC-insulated flexible and solid conductors
from 6...16 mm² (~AWG 10... 6)
• Cutting: PVC insulated flexible and solid conductors up to
6 mm² (AWG 10)
• No damage to the conductor thanks to specially shaped
blade
mm
STRIPAX
Flexible and solid conductors with PVC insulation
0.08...10
25
STRIPAX 16
Flexible and solid conductors with PVC insulation
6...16
25
mm²
6
6
mm
g
190
175
190
175
Type
STRIPAX
STRIPAX ZERT
Qty.
1
1
Order No.
9005000000
9017330000
Type
STRIPAX 16
Qty.
1
Order No.
9005610000
Type
ERME 10² SPX 4
Qty.
1
Order No.
1119030000
Type
ERME 16² SPX 4
Qty.
1
Order No.
1119040000
2021630000
Stripping and cutting tools
• For flexible and solid conductors
• Ideally suitable for mechanical and plant engineering,
railway and rail traffic, wind energy, robot technology,
explosion protection as well as marine, offshore and
ship building sectors
• Stripping length adjustable via end stop
• Automatic opening of clamping jaws after stripping
• No fanning-out of individual conductors
• Adjustable to diverse insulation thicknesses
• Double-insulated cables in two process steps without
special adjustment
• No play in self-adjusting cutting unit
• Long service life
• Optimised ergonomic design
• Selectable two-stage partial stripping
Technical data
Max. stripping performance
Cable type
Wire cross-section, min. / max.
Stripping length, max.
Cutting performance
Conductor cross-section (cutting capacity)
Tool data
Length
Weight
Note
Ordering data
Version
stripax® ULtimate
stripax® ULtimate XL
0.25...6 mm²
2.5–10 mm²
• Stripping and cutting of flexible and solid conductors
from 0.25...6 mm² (~AWG 24... 10)
• Especially suitable for UL-specified conductors and
halogen-free insulation materials
• Stripping and cutting of flexible and solid conductors
from 2,5 ... 10 mm² (~AWG 14 - 8)
• Especially suitable for UL-specified conductors and
halogen-free insulation materials
Stripping
Stripping tools with automatic
self-adjustment
mm
STRIPAX ULTIMATE
Flexible and solid conductors with halogen-free insulation
0.25...6
25
STRIPAX ULTIMATE XL
Flexible and solid conductors with halogen-free insulation
2.5...10
25
mm²
6
6
mm
g
190
175
190
175
Type
STRIPAX ULTIMATE
Qty.
1
Order No.
1468880000
Type
STRIPAX ULTIMATE XL
Qty.
1
Order No.
1512780000
Type
ERME SPX UL
Qty.
1
Order No.
1471390000
Type
ERME SPX UL XL
Qty.
1
Order No.
1512790000
C
Note
Accessories
Note
2021630000
C.5
Stripping and cutting tools
Stripping
Stripping and cutting tool for conductors with
special insulation Types for conductor diameters
0.2 … 1.21 mm (~ AWG 32 … 18)
Mini-duro-stripax®
Blade set
• Flexible and solid conductors with PVC, Teflon (PTFE)
and silicone insulation
• Special stripping blades do not damage the conductor
• No splicing of the single conductors
• Blade inserts can be easily replaced
• All inserts fit one housing
C
Technical data
Max. stripping length
Stripping diameter max. cutting performance
Tool data
Length
Weight
Selection of blade sets
Conductor diameter
mm
Mini-duro-stripax®
3–7
2,2
mm
g
135
110
Colour blade set
mm (min./max.)
AWG
mm2
Insulation material
white
0,3–1,3
28 …18
≈ 0,08 ... 1,0
PVC / silicone
yellow
0,2–0,3
32/1, 32/7, 30/1,
30/7
PTFE
red
0,3–0,5
28/1, 28/7, 28/19,
26/1, 26/7, 26/19,
24/1
PTFE
green
0,55–0,8
24/7, 24/19, 22/1,
22/7, 22/19, 20/1
blue
0,88–0,92
20/7, 20/19
black
1,0–1,21
18/1, 18/7, 18/19
PTFE
PTFE
PTFE
Information
Ordering data
Tools with blade set
Order No.
9001280000
Tool with all blade sets
Order No.
9003500000
Accessories
Blade set
Order No.
9006970000
Order No.
9003700000
Order No.
9003710000
Order No.
9003720000
Order No.
9003730000
Order No.
9003740000
Order No.
9003600000
Order No.
9003610000
Order No.
9003620000
Order No.
9003630000
Order No.
9003640000
Information
C.6
2021630000
Stripping
C
2021630000
C.7
Stripping and cutting tools
Stripping
multi-stripax®
Stripping is the name given to the cutting and removal of
conductor insulation. When carrying out this task it must
be guaranteed that the appropriate length of insulation is
removed and that neither the conductor nor the remaining
insulation are damaged in any way.
C
The challenge
DIN IEC 352 part 2 (formerly DIN IEC 48/290) contains
details of the stripping faults to avoid.
AWG lines
Fieldbus lines
Bus applications
C.8
Standardised
conductors
Sensor and
actuator lines
Power supply and distribution
Cables for
Rail industry
Cables for the
aerospace industry
Sensors and actuators in the field
2021630000
Stripping and cutting tools
multi-stripax®
multi-stripax® the troubleshooter
•Interchangeable stripping units
•Proper stripping of any conductor round, flat or special profiles, thanks to the specially shaped stripping blades
•Incorporates cutting function for up to 2.5 mm2 solid and 6 mm2 fine
•Fatigue free operation thanks to ergonomic design
•No damage to conductor or remaining insulation
•Best stripping results for industrial applications
•Stripping results reproduced accurately time and time again
•A long lasting, reliable tool thanks to its robust design
•Plus, the customary Weidmüller repair service
Cutting
Positioning
Special stripping units – the answer to diverse stripping tasks
The multi-stripax® tool, distinguished by its robust design was developed,
following customer feedback, to handle all the stripping tasks they have met with
in practice.
Thanks to the interchangeable stripping units, a special solution can be found for
every challenge in the marketplace.
Stripping
Multifunctional stripping tool for use on a multitude of conductor
insulation forms and configurations – even those not covered by the
standard
The specially shaped stripping blades guarantee perfect stripping results. The
guide plates ensure the correct positioning of the wire and therefore prevent
damage to the remaining wire. The clamping jaws hold the conductor with just
the right force during the stripping operation and are matched to the specific
situation at hand. The flexibility of the multi-stripax® to affect the result of the
stripping operations depending on the different variables it encounters makes it a
universal troubleshooter.
C
Stripping
multi-stripax®
Technical data
2021630000
Cable type
Conductor cross-section, min.
Conductor cross-section, max.
PVC, Teflon, PTE, PUR, silicone, halogen free
2 mm
no limit (in several steps)
max. cutting capacity, fine-strand
max. cutting capacity, solid
max. cutting capacity, ribbon
6 mm²
2,5 mm²
10,2 x 4 mm
Length/Width/Height
Weight
Note
250 / 85 / 40 mm
250 g
C.9
Stripping and cutting tools
Stripping
multi-stripax® incl. stripping unit
1
2
Ordering data
C
Illustration
Type
Qty.
3
Order No.
Features
• High quality stripping for industrial applications
• Specially shaped stripping blades enable stripping of special types of insulation and
conductor configurations
• Adjustable stop for setting stripping lengths from 2.3 to 30 mm
• Highly flexible thanks to interchangeable stripping units
• Stripping results reproduced accurately time and time again
• No damage to the conductor or insulation
• A durable, reliable tool thanks to its robust design
• Integral cutting function for max. 2.5 mm2 solid or 6 mm2 flexible cables
1
®
multi-stripax 0,25 -1,5S
1
9204540000
Halogen free PVC, silicone, teflon and Radox 3GK-insulated cables;
Cable cross section 0.25 up to 1.5 mm²
max. stripping lengths depends on cable design / cable type
Cutting function up to 6 mm²
1
multi-stripax® 0,75 -4,0SL
1
9203610000
Halogen free PVC, silicone and teflon insulated cables;
Cable cross section 0.75 up to 4 mm²
max. stripping lengths depends on cable design / cable type
Cutting function up to 6 mm²
1
multi-stripax 1,5 -6,0S
9204560000
Halogen free PVC, silicone, teflon and Radox 3GKW-insulated cables;
Cable cross section 1.5 up to 6 mm²
max. stripping lengths depends on cable design / cable type
Cutting function up to 6 mm²
®
1
1
multi-stripax® 16SL
1
9202220000
1
multi-stripax® 6-16
1
9202210000
1
multi-stripax AWG
1
multi-stripax ASI
1
multi-stripax® GKW LW
1
multi-stripax PV
1
PVC insulated cables; Cable cross section 16 mm²
max. stripping lengths depends on cable design / cable type
1. station solid, stranded and flexible (restricted)
2. station double stranded
Cutting function up to 6 mm²
PVC insulated cables; Cable cross section 6 up to 16 mm²; max. stripping lengths depends on cable design / cable type
1. station solid, stranded and flexible 6 mm²
2. station solid, stranded and flexible 10 mm²
3. station solid, stranded and flexible 16 mm² double stranded (flexible)
Cutting function up to 6 mm²
9202230000
AWG with PTFE and PVC insulated cables;
Cable cross-section AWG 26...16
max. stripping lengths depends on cable design
Cutting function up to 6mm² (AWG 16)
1
9202250000
ASI Bus cables 2 x 1.5 mm² flexible
for PTE, PUR and EPDM insulated cables
Stripping of outer insulation and inner cable
Cutting function up to 6 mm²
1
9205760000
Railway cable Radox GKW LW; Cable cross section 1.0; 1.5 and 2.5 mm²
max. stripping lengths depends on cable design / cable type
Cutting function up to 6 mm²
1
1190490000
Photovoltaics cable and comparable earth and short circuit proof cables;
Cable cross section 2.5; 4 and 6 mm²
max. stripping lengths depends on cable design / cable type
Cutting function up to 6.mm²
multi-stripax® POF
1
1208880000
Duplex Stripping tool for fast processing of POF fiber and cable
according to IEC 60793-2 A4A fibre (1,000 µm/980 µm POF).
Cutting function up to 6 mm²
2
ERAN multi-stripax®
1
9203100000
Length stop
3
ERME multi-stripax®
1
9203070000
Cutting knife
®
®
®
1
Note
C.10
2021630000
Stripping and cutting tools
Stripping unit consists of:
• Highly flexible thanks to interchangeable stripping units
• High quality stripping for industrial applications
• Specially shaped stripping blades enable stripping of
special types of insulation and conductor configurations
Clamping jaws
Short symbol KLBC SPX SP
Insulation stripping tool Short symbol AIME SPX SP
Guide plate
Short symbol FUEPL SPX SP
Bestelldaten
Type
e = eindrähtig
m= mehrdrähtig
f = feindrähtig
Qty.
Order No.
Features
AIE multi-stripax® 0,25 -1,5S
1
9204550000
Halogen free PVC, silicone, teflon and Radox 3GK-insulated cables;
Cable cross section 0.25 up to 1.5 mm²
max. stripping lengths depends on cable design / cable type
AIE multi-stripax® 0,75 -4,0SL
1
9203730000
Halogen free PVC, silicone and teflon insulated cables;
Cable cross section 0.75 up to 4 mm²
max. stripping lengths depends on cable design / cable type
AIE multi-stripax® 1,5 -6,0S
1
9204570000
Halogen free PVC, silicone, teflon and Radox 3GKW-insulated cables;
Cable cross section 1.5 up to 6 mm²
max. stripping lengths depends on cable design / cable type
AIE multi-stripax 16SL
1
9202270000
PVC insulated cables; Cable cross section 16 mm²
max. stripping lengths depends on cable design / cable type
1. station solid, stranded and flexible (restricted)
2. station double stranded
AIE multi-stripax® 6-16
1
9202260000
PVC insulated cables; Cable cross section 6 up to 16 mm²; max. stripping lengths depends on cable design / cable type
1. station solid, stranded and flexible 6 mm²
2. station solid, stranded and flexible 10 mm²
3. station solid, stranded and flexible 16 mm² double stranded (flexible)
AIE multi-stripax® AWG
1
9202280000
AWG with PTFE and PVC- insulated cables;
Cable cross section AWG 26...16
max. stripping lengths depends on cable design
AIE multi-stripax® ASI
1
9202300000
ASI Bus cables 2 x 1.5 mm² flexible
for PTE, PUR and EPDM insulated cables
Stripping of outer insulation and inner cable
AIE multi-stripax® GKW LW
1
9205770000
Railway cable Radox GKW LW; Cable cross section 1.0; 1.5 and 2.5 mm²
max. stripping lengths depends on cable design / cable type
AIE multi-stripax® PV
1
1204280000
Photovoltaics cable and comparable earth and short circuit proof cables;
Cable cross section 2.5; 4 and 6 mm²
max. stripping lengths depends on cable design / cable type
AIE multi-stripax® POF
1
1212770000
Duplex Stripping tool for fast processing of POF fiber and cable
according to IEC 60793-2 A4A fibre (1,000 µm/980 µm POF).
®
2021630000
Stripping
Stripping and cutting tool multi-stripax®
C
C.11
Sheathing strippers
Sheathing strippers
AM 25 / AM 35
AM 12
AM 25: Ø 6–25 mm; AM 35: Ø 25–36 mm
For UTP and STP data cables
• Pivoting blade for circumferential, longitudinal and spiral
cuts
• Retaining bracket with integrated blade to break open
an incision in the insulation
• Integrated spare blade
• Cutting of UTP and STP data cables and other
flexible copper cables with a diameter of up to 4 mm²
(~AWG11)
• Stripping of the outer insulation of UTP and STP data
cables and other round cables with Ø approx. 0.5 ...
12.5 mm
• No damage to the shielding or conductor due to
adjustable stripping blade
• Length end stop for repeated cutting and stripping
lengths
Stripping
• Sheathing stripper for round cables
C
Technical data
Max. stripping performance
Cable type
Min. conductor diameter
Depth of cut
Cutting performance
UTP und STP data cables, max. diameter
Copper cable - flexible, max.
Tool data
Length
Weight
Note
Ordering data
Version
Note
Accessories
Note
C.12
mm
AM 25
PVC round cable
6...25
adjustable up to 4.5 mm
AM 35
PVC round cable
25...36
adjustable up to 4.5 mm
8
4
mm
g
AM 12
UTP and STP data cables
0.5...12.5
adjustable
135
135
140
135
97
36
Type
AM 25
AM 35
Qty.
1
1
Order No.
9001540000
9001080000
Type
AM 12
Qty.
1
Order No.
9030060000
Type
ERSATZMESSER AM 25/35
Qty.
2
Order No.
9001530000
Type
Qty.
Order No.
Sheathing stripper
Sheathing stripper
2021630000
Sheathing strippers
• Sheathing strippers for insulated cables
• Especially suitable for stripping cables with PVC, PUR,
PE, TPE and halogen-free LSZH insulation
• Insulation can be stripped from any point along the cable
• Opening of slit insulation with integrated cutter
AM 16
AMF 6/10
For round cables, Ø 5...17 mm
For ribbon cable, 6 mm² and 10 mm²
Stripping
Sheathing strippers
C
• Also highly suitable for stripping cables in the cable duct
• AM 16 guarantees precise cable routing
• Exact regulation of the cut depth with integrated visual
display
Technical data
Max. stripping performance
Cable type
Conductor cross-section, min. AWG
Min. conductor diameter
Depth of cut
Cutting performance
UTP und STP data cables, max. diameter
Copper cable - flexible, max.
Tool data
Length
Weight
Note
Ordering data
Version
mm
AM 16
Round cable
AMF 6/10
PVC ribbon cable
5...17
0.5 - 2.5 mm²
0 - 4.0 mm
53
60
110
115
mm
g
Type
AM 16
Qty.
1
Order No.
9204190000
Type
AMF 6/10
Qty.
1
Order No.
9204180000
Type
ERME AM 16
Qty.
1
Order No.
9204260000
Type
ERME AMF 6/10
Qty.
1
Order No.
9204250000
Note
Accessories
Note
2021630000
Sheathing stripper
Sheathing stripper
C.13
Sheathing strippers
Stripping
Sheathing strippers for coaxial cable
• For coaxial cable and round (shielded) data cables from
Ø 2.5...8 mm
• 1-, 2- and 3-level stripping in one step
• Fast changeover to other cable types thanks to
adjustable and interchangeable screw holder
• Colour-coded, interchangeable cassettes with specified
stripping length for standard coaxial cable: see table
• Setting block (included) permits quick pre-setting of
cutting depths
• Blade cassettes can be used on both sides
C
CST / IE-CST
Ø 2.5...8 mm
&XWWHUFDVVHWWHVIRU&67
• RG 58 and RG 71
• RG 59 and RG 62
• Antenna cable
• Profibus cable
• Ethernet cable
WZRVWHS
WKUHHVWHS
%
Technical data
Max. stripping performance
Cable type
Min. conductor diameter
Stripping length, max.
Tool data
Length
Weight
Note
Ordering data
Version
Note
Accessories
Note
C.14
mm
mm
g
CST
Coaxial & round data cables
2.5...8
IE-CST
Coaxial & round data cables
2.5...8
100
65
100
85
&RORXUFXWWHUFDVVHWWHV
JUH\
UHG
\HOORZ
EOXH
ZKLWH
JUHHQ
EURZQ
RUDQJH
OLJKWJUHHQ
EODFN
$
&
%>PP@
%
$
&>PP@
'LP$DVVWDWHGE\PDQXIDFWXUHUQRWGHILQHGE\WRRO
Type
CST
IE-CST
Qty.
1
1
Order No.
9030500000
9204350000
Type
SCHA CST
SCHRAUBENDREHER CST
EINSTELLBLOCK CST
Qty.
1
1
1
Order No.
9032060000
9005720000
9005800000
IE-CST including blade cartridge, adjusted to Weidmüller Ethernet cable
Dimension A: as specified by connector manufacturer (not defined by
tool)
&RORXUFXWWHUFDVVHWWHV
JUH\
UHG
\HOORZ
EOXH
ZKLWH
JUHHQ
EURZQ
RUDQJH
OLJKWJUHHQ
EODFN
4W\
2UGHU1R
2021630000
Sheathing strippers
• For coaxial cable and round (shielded) data cables from
Ø 2.5...8 mm
• 1-, 2- and 3-level stripping in one step
• Adjustable stripping lengths in 1 mm steps for
meshwork and dielectric materials (min. stripping length
approx. 3.2 mm)
• Fast changeover to other cable types
• Max. stripping length 17 mm
• Incl. 3 blades
CST vario
Ø 2.5...8 mm
&679DULREODGHKROGHU
2UGHULQJGDWD
7\SH
&679$5,2%/$'(+2/'(5
4W\
2UGHU1R
Stripping
Sheathing strippers for coaxial cable
&679DULREODGHLQVHUW
• RG 58 and RG 71
• RG 59 and RG 62
• Antenna cable
• Profibus cable
• Ethernet cable
2UGHULQJGDWD
7\SH
&679$5,2%/$'(,16(57
C
4W\
2UGHU1R
4W\
2UGHU1R
4W\
2UGHU1R
4W\
2UGHU1R
&676FUHZGULYHU
2UGHULQJGDWD
7\SH
&676&5(:'5,9(5
6HWWLQJEORFN&67
Technical data
Max. stripping performance
Cable type
Min. conductor diameter
Stripping length, max.
Tool data
Length
Weight
Note
Ordering data
Version
mm
mm
CST VARIO
Coaxial & round data cables
2.5...8
17
mm
g
116
76
2UGHULQJGDWD
7\SH
&676(77,1*%/2&.
Type
CST VARIO
Qty.
1
Order No.
9005700000
Type
SCHRAUBENDREHER CST
MESSERHALTER CST VARIO
MESSEREINSATZ CST VARIO
Qty.
1
1
1
Order No.
9005720000
9005740000
9005730000
6FUHZKROGHU&67
Note
Accessories
Note
2021630000
Includes spare blade set (1 set = 3 blades)
2UGHULQJGDWD
7\SH
&676&5(:+2/'(5
C.15
Sheathing strippers
Stripping
Cable sheathing stripper
• For fast and accurate stripping of cables for damp areas
ranging from Ø 8 - 13 mm, e.g. NYM cable,
3 x 1.5 mm² to 5 x 2.5 mm²
• No need to set cutting depth
• Ideal for working in junction and distribution boxes
C
Technical data
Max. stripping performance
Cable type
Min. conductor diameter
Wire cross-section, min. / max.
Tool data
Length
Weight
Note
Ordering data
Version
mm
mm
g
Stripper round
Stripper round top
Round cable stripper
Round cable stripper with individual wire stripper
• Damp-proof cable Ø 8...13 mm
• Damp-proof cable Ø 8...13 mm
• With stripping device for individual wires of 0.2-4.0 mm²
• With integrated longitudinal cutter
• Retractable internal blade
Stripper round
Flexible and solid conductors with PVC insulation
8...13
STRIPPER ROUND TOP
Flexible and solid conductors with PVC insulation
8...13
0.2...4
125
47
125
50
Type
Stripper round
Qty.
1
Order No.
9918040000
Type
STRIPPER ROUND TOP
Qty.
1
Order No.
9918050000
Note
C.16
2021630000
Sheathing strippers
• Simple, fast and accurate stripping of all conventional
round cables from Ø 4...37 mm
• Circumferential and longitudinal cuts with automatic
rotary blade
• Knurled screw at end of handle for setting cutting depth
• Spring-loaded cable retaining clip with thumb guard
• Spare blade in handle
Technical data
Max. stripping performance
Cable type
Min. conductor diameter
Tool data
Length
Weight
Note
Ordering data
Version
Slicer NO 16
Slicer NO 27
Cable cutter Ø 4...16 mm
Cable cutter Ø 8...28 mm
• Operating range: 4...16 mm outer diameter
• Operating range: 8...28 mm outer diameter
Stripping
Cable knife
mm
SLICER NO 16
Flexible and solid conductors with PVC insulation
4...16
SLICER NO 27
Flexible and solid conductors with PVC insulation
8...28
mm
g
122
75
122
75
Type
SLICER NO 16
Qty.
1
Order No.
9918070000
Type
SLICER NO 27
Qty.
1
Order No.
9918080000
Type
ZUB SLICER NO16-35
Qty.
2
Order No.
9201430000
Type
ZUB SLICER NO16-35
Qty.
2
Order No.
9201430000
C
Note
Accessories
Note
2021630000
C.17
Sheathing strippers
Special cable sheathing stripper
Stripper PC
Stripper Coax
Special cable stripper
Special cable stripper
• Cable diameter Ø 5...15 mm
• For wires and conductors from 0.25 - 4.0 mm² (24 - 12
AWG)
• For data cables in the telecommunications and IT sectors
• IBM network cables
• Printer cables
• Control cables
• Cable diameter Ø 4.8...7.5 mm
• For PVC-insulated data communication and control
cables
• RG 58 / RG 59
• TV antenna cables between Ø 4.8 and 7.5 mm
• PVC round cables 3 x 0.75 mm²
Stripping
Insulation stripping tool
for data communication systems
C
Technical data
Max. stripping performance
Cable type
Min. conductor diameter
Wire cross-section, min. / max.
Tool data
Length
Weight
Note
Ordering data
Version
mm
mm²
STRIPPER PC
Data cable / telecommunications and IT
5...15
0.25...4
STRIPPER COAX
Coaxial & round data cables
4.8...7.5
mm
g
125
55
97
22
Type
STRIPPER PC
Qty.
1
Order No.
9918060000
Type
STRIPPER COAX
Qty.
1
Order No.
9918030000
Note
C.18
2021630000