2N5154HR Hi-Rel NPN bipolar transistor 80 V, 5 A Datasheet - production data Features TO-39 VCEO 80 V IC (max) 5A HFE at 10 V, 150 mA > 70 Operating temperature range - 65 °C to + 200 °C TO-257 • Hi-Rel NPN bipolar transistor • Linear gain characteristics SMD.5 • ESCC qualified • European preferred part list - EPPL Figure 1. Internal schematic diagram • Radiation level: lot specific total dose contact marketing for specified level Description Base and Emitter are inverted for 2N5154RSRHRx and 2N5154SRHRx series AM3128V1_n The 2N5154HR is a silicon planar epitaxial NPN transistor in TO-39, TO-257 and SMD.5 packages. It is specifically designed for aerospace Hi-Rel applications and ESCC qualified according to the 5203/010 specification. In case of conflict between this datasheet and ESCC detailed specification, the latter prevails. Table 1. Device summary Order code Quality level Agency specification Package 2N5154HRx Other features EPPL TO-39 2N5154RHRx 100 krad ESCC LDR 2N5154ESYHRx TO-257 2N5154RESYHRx 100 krad ESCC LDR ESCC 5203/010 Yes 2N5154RSHRx 100 krad LDR, emitter on pin 1 2N5154SHRx Emitter on pin 1 SMD.5 2N5154RSRHRx 100 krad LDR, emitter on pin 2 2N5154SRHRx Emitter on pin 2 May 2016 This is information on a product in full production. DocID15387 Rev 9 1/18 www.st.com Contents 2N5154HR Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.2 Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3 Radiation hardness assurance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 4 Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4.1 TO-39 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4.2 TO-257 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 4.3 SMD.5 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 5 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 6 Shipping details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 7 2/18 6.1 Date code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 6.2 Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 DocID15387 Rev 9 2N5154HR 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Value Symbol Parameter TO-257 SMD.5 TO-39 VCBO Collector-base voltage (IE = 0 A) 100 VCEO Collector-emitter voltage (IB = 0 A) 80 VEBO Emitter-base voltage (IC = 0 A) 6 Collector current 5 IC PTOT TSTG TJ Unit V A Total dissipation at Tamb ≤ 25 °C 1 3.3 Total dissipation at Tcase ≤ 25 °C 8.75 35 W Storage temperature range -65 to 200 °C Operating junction temperature range Table 3. Thermal data Value Symbol Parameter TO-39 TO-257 SMD.5 RthJ-case Thermal resistance junction-case 20 5 RthJ-amb Thermal resistance junction-ambient 175 53 DocID15387 Rev 9 Unit °C/W 3/18 18 Electrical characteristics 2 2N5154HR Electrical characteristics Tcase = 25 °C unless otherwise specified. Table 4. Electrical characteristics Symbol Parameter Test conditions Typ. Max. Unit VCB = 60 V, IE = 0 A - 1 µA VCB = 60 V, IE = 0 A Tamb = 150 °C - 10 µA VEB = 5 V, IC = 0 A - 1 µA VEB = 6 V, IC = 0 A - 1 mA - 50 µA ICES Collector cut-off current IEBO Emitter cut-off current ICEO Collector cut-off current VCE = 40 V, IB = 0 A V(BR)CEO (1) Collector-emitter breakdown voltage IC = 100 mA, IB = 0 A VCE(sat) (1) Collector-emitter saturation voltage IC = 2.5 A, IB = 0.25 A - 1.45 IC = 5 A, IB = 0.5 A - 1.5 VBE(sat) (1) Base-emitter saturation voltage IC = 2.5 A, IB = 0.25 A - 1.45 IC = 5 A, IB = 0.5 A - 2.2 hFE (1) DC current gain 70 - IC = 5 A, VCE = 5 V 40 - IC = 2.5 A, VCE = 5 V Tamb = - 55 °C 35 - 3.5 - COBO Output capacitance IE = 0 A, VCB = 10 V f = 1 MHz toff Turn-off time V IC = 2.5 A, VCE = 5 V VCE = 5 V, IC = 500 mA f = 20 MHz VCC = 30 V, VBB = -4 V Vin ≅ 51 V, IC = 5 A IB1 = - IB2 = 0.5 A DocID15387 Rev 9 V V - AC forward current transfer ratio Turn-on time - 50 hfe ton 80 IC = 50 mA, VCE = 5 V 1. Pulsed duration = 300 µs, duty cycle ≤ 2% 4/18 Min. 200 - 250 pF - 0.5 µs - 1.3 µs 2N5154HR 2.1 Electrical characteristics Electrical characteristics (curves) Figure 2. VBEon @ VCE = 5 V Figure 3. hFE @VCE = 5 VBE(on) (V) AM12793v1 AM12790v1 hFE -55°C 25°C 125°C 1.05 1 0.95 0.9 0.85 [V] 0.8 100 0.75 0.7 0.65 0.6 -55°C 25°C 125°C 0.55 0.5 0.45 0.1 1 Ic (A) 10 10 0.01 Figure 4. VCE(sat) @ hFE = 10 0.1 Ic (A) 1 10 Figure 5. VBE(sat) @ hFE = 10 VCE(sat) (V) AM12791v1 VBE(sat) (V) 1.1 AM12792v1 1.05 1 0.95 0.9 0.85 0.1 0.8 0.75 -55°C 25°C 125°C 0.7 0.65 -55°C 25°C 125°C 0.6 0.55 0.01 0.01 0.1 1 10 0.5 0.01 Ic (A) DocID15387 Rev 9 0.1 1 10 Ic (A) 5/18 18 Electrical characteristics 2.2 2N5154HR Test circuit Figure 6. Resistive load switching test circuit 1. Fast electronic switch 2. Non-inductive resistor 6/18 DocID15387 Rev 9 2N5154HR 3 Radiation hardness assurance Radiation hardness assurance The products guaranteed in radiation within the ESCC system fully comply with the ESCC 5203/010 and ESCC 22900 specifications. ESCC radiation assurance Each product lot is tested according to the ESCC basic specification 22900, with a minimum of 11 samples per diffusion lot and 5 samples per wafer, one sample being kept as unirradiated sample, all of them being fully compliant with the applicable ESCC generic and/or detailed specification. ST goes beyond the ESCC specification by performing the following procedure: – Test of 11 pieces by wafer, 5 biased at least 80% of V(BR)CEO, 5 unbiased and 1 kept for reference – Irradiation at 0.1 rad (Si)/s – Acceptance criteria of each individual wafer if as 100 krad guaranteed if all 10 samples comply with the post radiation electrical characteristics provided in Table 5 – Delivery together with the parts of the radiation verification test (RVT) report of the particular wafer used to manufacture the products. This RVT includes the value of each parameter at 30, 50, 70 and 100 krad (Si) and after 24 hour annealing at room temperature and after an additional 168 hour annealing at 100°C. DocID15387 Rev 9 7/18 18 Radiation hardness assurance 2N5154HR Table 5. ESCC 5203/010 post radiation electrical characteristics Symbol Parameter Test conditions Min. Typ. Max. Unit VCB = 60 V, IE = 0 A - 1 µA VEB = 5 V, IC = 0 A - 1 µA VEB = 6 V, IC = 0 A - 1 mA - 50 µA ICES Collector cut-off current IEBO Emitter cut-off current ICEO Collector cut-off current VCE = 40 V, IB = 0 A V(BR)CEO (1) Collector-emitter breakdown voltage IC = 100 mA, IB = 0 A VCE(sat) (1) Collector-emitter saturation voltage IC = 2.5 A, IB = 0.25 A - 1.45 IC = 5 A, IB = 0.5 A - 1.5 VBE(sat) (1) Base-emitter saturation voltage IC = 2.5 A, IB = 0.25 A - 1.45 IC = 5 A, IB = 0.5 A - 2.2 [hFE] (1) Post irradiation gain calculation(2) 80 - V V V IC = 50 mA VCE = 5 V [25] - IC = 2.5 A VCE = 5 V [35] - IC = 5 A VCE = 5 V [20] - [200] 1. Pulsed duration = 300 µs, duty cycle ≤ 2% 2. The post-irradiation gain calculation of [hFE], made using hFE measurements from prior to and on completion of irradiation testing and after each annealing step if any, shall be as specified in MILSTD-750 method 1019. 8/18 DocID15387 Rev 9 2N5154HR 4 Package information Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 4.1 TO-39 package information Figure 7. TO-39 package outline 0015972_8 DocID15387 Rev 9 9/18 18 Package information 2N5154HR Table 6. TO-39 package mechanical data mm Dim. 10/18 Min. Typ. Max. A 12.70 13.50 14.30 B 0.40 0.45 0.49 C 0.58 0.74 D 6.00 6.40 E 8.15 F 9.10 G 4.93 5.08 5.23 H 0.86 0.91 0.96 I 0.77 0.80 0.86 L 42 ° 45 ° 48 ° DocID15387 Rev 9 8.20 8.25 9.40 2N5154HR 4.2 Package information TO-257 package information Figure 8. TO-257 package outline 0117268 rev 6 DocID15387 Rev 9 11/18 18 Package information 2N5154HR Table 7. TO-257 package mechanical data mm Dim. Min. Typ. Max. A 4.83 4.95 5.08 A1 0.89 1.02 1.14 A2 2.91 3.05 3.18 b 0.64 b1 0.64 0.74 0.89 D 16.51 16.64 16.76 D1 10.41 10.54 10.67 1.02 D2 0.97 e 2.41 2.54 2.67 E 10.41 10.54 10.67 H 5.13 5.25 5.38 L 15.24 15.88 16.51 L1 13.39 13.51 13.64 M 2.16 2.29 2.41 N P 0.71 3.56 R 12/18 3.68 1.65 DocID15387 Rev 9 3.81 2N5154HR 4.3 Package information SMD.5 package information Figure 9. SMD.5 package outline Table 8. SMD.5 package mechanical data mm Inch Dim. Min. Typ. Max. Min. Typ. Max. A 2.84 3.00 3.15 0.112 0.118 0.124 A1 0.25 0.38 0.51 0.010 0.015 0.020 b 7.13 7.26 7.39 0.281 0.286 0.291 b1 5.58 5.72 5.84 0.220 0.225 0.230 b2 2.28 2.41 2.54 0.090 0.095 0.100 b3 2.92 3.05 3.18 0.115 0.120 0.125 D 10.03 10.16 10.28 0.935 0.400 0.405 D1 0.76 E 7.39 0.296 0.301 e 0.030 7.52 7.64 1.91 DocID15387 Rev 9 0.291 0.075 13/18 18 Ordering information Table 9. Order codes Order code Agency specification EPPL Quality level Other features 2N51541 - - Engineering model - 2N5154HRG 5203/010/01 Yes ESCC - Package Lead finish TO-39 Marking(1) Gold 2N51541 Gold 520301001 Solder dip 520301002 DocID15387 Rev 9 2N5154HRT 5203/010/02 Yes ESCC - 2N5154RHRG 5203/010/01R Yes ESCC 100 krad ESCC LDR Gold 520301001R 2N5154RHRT 5203/010/02R Yes ESCC 100 krad ESCC LDR Solder dip 520301002R 2N5154ESY1 - - Engineering model - Gold 2N5154ESY1 + BeO 2N5154ESYHRG 5203/010/04 Yes ESCC - Gold 520301004 + BeO Solder dip 520301005 + BeO TO-257 2N5154ESYHRT 5203/010/05 Yes ESCC - 2N5154RESYHRG 5203/010/04R Yes ESCC 100 krad ESCC LDR Gold 520301004R + BeO 2N5154RESYHRT 5203/010/05R Yes ESCC 100 krad ESCC LDR Solder dip 520301005R + BeO 2N5154S1 - - Engineering model Emitter on pin 1 2N5154S1 2N5154RSHRG 5203/010/06R Yes ESCC 100 krad LDR, emitter on pin 1 520301006R 2N5154SHRG 5203/010/06 Yes ESCC Emitter on pin 1 Packing Ordering information 14/18 5 Strip pack 520301006 SMD.5 Gold 2N5154SR1 - - Engineering model Emitter on pin 2 2N5154SR1 2N5154RSRHRG 5203/010/07R Yes ESCC 100 krad LDR, emitter on pin 2 520301007R 2N5154SRHRG 5203/010/07 Yes ESCC Emitter on pin 2 520301007 2N5154HR 1. Specific marking only. The full marking includes in addition, for the engineering models: ST logo, date code, country of origin (FR). For ESCC flight parts: ST logo, date code, country of origin (FR), ESA logo, serial number of the part within the assembly lot. 2N5154HR Ordering information Contact ST sales office for information about the specific conditions for: • Products in die form • Tape and reel packing DocID15387 Rev 9 15/18 18 Shipping details 2N5154HR 6 Shipping details 6.1 Date code Date code xyywwz is structured as per the table below: Table 10. Date code Type x EM (ESCC) 3 ESCC flight 6.2 yy Last two digits of the year ww Week digits z Lot index within the week Documentation Table 11. Documentation provided for each type of product Quality level Radiation level Engineering model Documentation Last two digits of the year Certificate of conformance ESCC flight 16/18 100 krad DocID15387 Rev 9 0.1 rad/s radiation verification test report 2N5154HR 7 Revision history Revision history . Table 12. Document revision history Date Revision 08-Jan-2009 1 Initial release 08-Jan-2010 2 Modified Table 1: Device summary 22-Jul-2011 3 Updated marking for the order code 2N5154ESYHRB in Table 1: Device summary 12-Sep-2012 4 Added: Section 2.1: Electrical characteristics (curves) on page 5 29-Jan-2014 5 Added Section 3: Radiation hardness assurance and Section 5: Ordering information Updated Table 1: Device summary. 08-Apr-2014 6 Updated Table 1: Device summary and Table 10: Order codes. Updated Section 4: Package mechanical data. Added Figure 2.: Safe operating area. Minor text changes. 29-Jan-2016 7 Updated Figure 2.: Safe operating area. Minor text changes. 05-Apr-2016 8 Added part number 2N5154RSRHRG. Document updated accordingly. Updated Section 4: Package information. 9 Updated package silhouette, Figure 1: Internal schematic diagram and Table 1: Device summary in cover page. Updated Section 4: Package information and Section 5: Ordering information. Inserted Section 6: Shipping details. Minor text changes. 02-May-2016 Changes DocID15387 Rev 9 17/18 18 2N5154HR IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2016 STMicroelectronics – All rights reserved 18/18 DocID15387 Rev 9