30MM Distributor Resource Center

Resource Center
30.5mm pilot devices
Answers for industry.
Siemens 30.5mm Pilot Device Resource Center
Table of Contents
General Information
Technical Specifications
Pushbuttons
Non-Illuminated – Illuminated
1
2
Selector Switches; 4-Position/Specialty
Non-Illuminated – Specialty
3
Push-Pull Operators; 2-Position
Maintained
Non-Illuminated, Illuminated
Pilot Lights
Plastic – Glass
9
23, 25
Non-Illuminated – Illuminated
Accessories
Cam and Contact Block Selection
Selector Switches; 3-Position
Non-Illuminated – Illuminated – Keyed
17, 21
7
Push-Pull Units; 3-Position
Push-Maintained, Pull Momentary
Selector Switches; 2-Position
Non-Illuminated – Illuminated – Keyed
17, 19
5
Push-Pull Units; 3-Position Momentary
Non-Illuminated, Illuminated
Twist to Release
Non-Illuminated – Illuminated
15
27
28
11, 13
­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­
Siemens 30.5mm Pilot Devices
General Information
Features
n Octagonal Mounting Nuts
n Meets Type 1, 3, 3R, 4, 4X, 12, 13 and
Automotive Standards
n Heavy Duty Rated NEMA A600/P600 Contacts
n Positive Indexing Selectors
n Bifurcated Movable Contacts
n Attractive Chrome Plating or Black Matte Finish
n Boots Not Required for Type 4
n UL Listed File # E22655
n CSA Certified File # LR6535
n Touchsafe Terminals
Application
Siemens pilot devices and accessories are designed
to provide long, trouble free service in the most
demanding of industrial applications. These controls
are water, oil, and dust tight and meet NEMA Type 1,
3, 3R, 4, 4X, 12, and 13 specifications.
Rugged
Industrial control operators are of durable one piece
castings. Heavy duty plastic buttons resist oils and
corrosion. Silver contacts carry heavy duty ratings
while standard gold flashing on contacts allows for
use in low current applications.
Flexible
Accessories modify standard pushbuttons, selector
switches, and pilot lights. Building block construction
of contact blocks makes it possible for many circuitry
combinations.
Industrial Appearance
Pilot controls add luster to panels. Chrome plating
covers exposed metal parts. The black matte finish
of Black Max pilot device operators allows for an
alternative look to finished panels while still offering
corrosion resistance and superior ingress protection.
Pushbutton Operators
The pushbutton operator base consists of a
durable, one piece casting. The base is equipped
with a heavy duty actuator with a stainless steel
spring, a neoprene actuator sealing ring to prevent
water, oil, and dust from penetrating to the contact
blocks, a neoprene gasket to seal operator mounting
hole, and a chrome plated locknut.
Mushroom Head Pushbutton Operators
Operator base construction is identical to the
pushbutton operator base. The actuator is molded
of high impact material for either a 1 ⁵⁄₈ inch or
2 ¹⁄₂ inch diameter molded head.
Contact Blocks
Contact blocks have double-break bifurcated silver
contacts, with gold flashing as standard, which
improves contact fidelity. Contact blocks are heavy
duty rated NEMA A600/P600 and suitable for
applications down to 5V/1MA solid state outputs.
Molded bodies and pushers resist arcing and
tracking. All units have stainless steel springs that
resist corrosion and provide strong contact pressure.
Captive mounting screws speed panel assembly.
Push-Pull Operators
Push-pull operators combine two or three functions
in one unit. The maintained operator has two
positions, typically pull to start, push to stop. The
momentary operator with three positions provides
spring return from both pull and push positions.
A three-position operator with push maintained and
pull momentary is available. Push-pull operators are
available in illuminated or non-illuminated versions.
Two-button Maintained Operator
Two-button maintained operator pushbuttons
consist of two Pushbuttons and a latching assembly.
When actuated the button remains depressed and
is freed only by the release operator to which it is
linked. The button assembly adjusts for mounting from
a 1¹³⁄₁₆ inch to a 2 ⁵⁄₈ inch center.
Transformer Type Pilot Lights
Transformer type pilot lights are available with a
120, 240, 277, 480, or 600 Volt primary (50/60
Hertz) and a separate secondary winding which
supplies reduced voltage to a miniature bayonet
base 6 Volt lamp. These units are suitable for
applications where vibration is present and long
bulb life is desirable.
Full Voltage Type Pilot Lights
Full voltage pilot lights are available for 6, 12, 24,
120, 277V, and 240 Volt AC and DC applications.
The 240 volt pilot light is supplied with a 120 volt
lamp and a voltage dropping resistor.
LED Type Pilot Lights and LED Module
The integrated LED modules are a single unit
combining all the features of a LED bulb and
lighting module into one. These will have extended
life and are the most resistant to vibration.
LEDs (light emitting diodes) can be used in pilot
lights instead of incandescent bulbs because of
their extremely long life, resistance to vibration,
and ambient sensitivity.
Selector Operators
Selector operators have positive action indexing.
Operators are available with either a short or
long lever. The molded black lever is designed
to accept a color insert. A white insert is provided
as standard; however, eight alternative lever insert
colors are available. Each operator is equipped
with a cam to actuate plungers of contact blocks
assembled behind the operator. Two, three, and
four position operators are available with seven
different cams.
1
Siemens 30.5mm Pilot Devices
Technical Specifications
Standards
Utilization
Degree of Protection
UL Listed File # E22655
Category NEMA
52B, 52P-, 52S-, 52M- Operators
CSA Certified File # LR6535
A600/P600
NEMA: 1, 3, 3R, 4, 4X, 12 and 13
IEC 529; IP10, IP11, IP14, IP52, IP54, and IP56
Rated Operational Current
NEMA A600 - 10 Continuous Amps
Voltage AC
Make Amps
Break Amps
120V
60
6
240V
30
3
480V
15
1.5
600V
12
1.2
Total VA
7200
720
Contact Blocks
Pilot Light
Push-to-Test
Illuminated Push-Pull
Illuminated
Selector
Switch
NEMA P600 - Rating Codes for DC Control Circuit Application
Thermal Continuous Test Current Amps
5.0
Maximum Make or Break; Current / Amps
125V
1.10
250V
0.55
301-600V
0.20
Maximum Make or Break
Volt amperes at 300V or Less
138
52BAK, -BAJ, -BAH, -BAU, -BJK
600VAC Maximum, Heavy Duty
52BAR
200VAC .25 Amp, 10 Watt Maximum
200VDC .50 Amp, 10 Watt Maximum
Contact blocks are suitable for applications down to 5V/1MA low voltage applications as found in PLCs.
52BAR are Class 1; Division 2 Compliant
Full Voltage
52PL4
-B (6-8V), -C (12V), -D (24V), -E (120V)
120V AC/DC Maximum
LED Module
52PL5
-L (24V), -M (120V) -N (240V)
240V AC Maximum
Transformer Type
52BL452BL5
-G (120V), -H (240V), -J (480V), K (600V)
600V AC Maximum, 50/60 Hz
Full Voltage
52PT6
-B (6-8V), -C (12V), -D (24V), -E (120V)
24V AC/DC Maximum
LED Module
52BP6
-L (24V), -M (120V), -N (240V)
240V AC Maximum
Transformer
-G (120V), -H (240V), -J (480V), -K (600V)
600VAC Maximum, 50/60 Hz
Full Voltage LED Module
52PP2(3,7)
-B (6-8V), -C (12V), -D (24V), -E (120V)
24V AC/DC Maximum
-L (24V), -M (120V), - N (240V)
240V AC Maximum
Transformer
52BP2(3,7)
-G (120V), -H (240V), -J (480V), -K (600V)
600VAC Maximum, 50/60 Hz
Full Voltage
Transformer
52SA7
52SA7
-AD,-BD,-CD
-AG, (120V), -BG (120V), -CG (120V),
-BH (240V), -CH (240V)
2200V for one minute
24V AC/DC Maximum
240VAC Maximum, 50/60 Hz
Dielectric Strength
Mechanical Design Life Cycles
Vibration
Frequency 5 - 60Hz.; Disp. .030 inches, sweep 5 minutes for a duration of 30 minutes on each axis. Not to exceed 5.5 G’s for maximum of 1 minute.
Pushbuttons
Momentary, Non-illuminated
5,000,000 Operating Cycles
Momentary, Illuminated
300,000 Operating Cycles
Push-Pull
Maintained
300,000 Operating Cycles
Momentary
2,000,000 Operating Cycles
Twist-to-Release
300,000 Operating Cycles
Selector
Non-illuminated
2,000,000 Operating Cycles
Switches
Illuminated, Key-operated
2,000,000 Operating Cycles
Contact Operation
Standard Contact Black
Logic Reed
Wire Gauge
#18-12 AWG
Terminal Screw Torque
2-10 lb-in / 20 lb-in max; 8 lb-in recommended
Locknut Torque
15 ft. lbs. max
Temperature
Operating
31F to +158F (-35C to +70C)
Range
Storage
40F to +185F (-40C to +85C)
All parts are designed and manufactured of corrosion resistant material or are plated or painted as corrosion protection. All contact block contacts are gold flashed as a standard offering. Internal return spring mechanisms
of operators and contact blocks of stainless steel. RoHS Compliant.
Declaration of Conformity — The products listed below, to which this declaration relates, are in conformity with the following standards, following the provisions of the Low Voltage Directive (LVD) (73/23/EEC), and the
Electromagnetic Compatibility Directive (89/336/EEC.)
Products: Contact Blocks: Cat Nos. 52BAE, 52BAH, 52BAJ, 52BAK, 52BAR, 52BAU and 52BJK, with suffixes. Pilot Lights: Cat Nos 52P, with suffixes. Operators: Cat Nos 52S or 52P, with suffixes.
Applicable Standards: EN 60947-5-1 Low-Voltage Switchgear and controlgear. Enclosed devices meet the requirements of environmental ratings of IP10, IP11, IP14, IP52, IP54, and IP56. Open devices, when mounted as
instructed, in environmental type IP10, IP11, IP14, IP52, IP54 or IP56 enclosures, maintain the environmental requirements for those enclosure types.
2
Siemens Pushbuttons
Components
Operators Only
Complete Units
Operator Specific
Accessories
Contact Blocks
1)
Flush Pushbuttons – Non-Illuminated
52P *8*1 *
52P* 8*2 *
52P *8*3 *
52P *8*4 *
52P *8*5 *
52P *8*6 *
52P *8*8 *
••
••
••
•
Chrome
BlackMax
1) Flush
2) Extended
A A 1) K
X F 2) J
A
F
G
B
1 NO
1 NC
1 NO + 1NC
2 NO
2 NC
2 NO + 2 NC
Flush Pushbuttons – Non-Illuminated
52P *8*1
52P *8*2
52P *8*3
52P *8*4
52P *8*5
52P *8*6
52P *8*8
Kit All Colors 52P *8*N
••
••
••
•
Chrome
Black Max
A
X
A Flush
F Extended
Contact Blocks For All Operators
52BAK 1 NO
52BAJ
1 NC
52BJK
1 NO + 1 NC
52BAH 1 NO Early Make
52BAE 1 NC Late Break
52BAU 1 NC Extra Late Break
52BAR 1 NO + 1 NC 2)
1)
2)
52BAR
Hermetically Sealed, UL Listed for Class 1,
Division 2, .25A Max., 200V AC, 10 Watt
.5A Max., 200V AC, 10 Watt
Basic Pushbuttons
For Basic Non-Illuminated Pushbuttons
52RA1*1
52RA1*2
52RA1*3
52RA1*4
52RA1*5
52RA1*6
52RA1*8
Kit All Colors
52RA1*N
••
••
••
•
A Flush
F Extended
1)
Extended Mushroom Head Momentary
Pushbuttons – Non-Illuminated
52P *9*1 *
52P* 9*2 *
52P *9*3 *
52P *9*4 *
52P *9*5 *
52P *9*6 *
52P *9*8 *
••
••
••
•
Chrome
Black Max
1) 1⁵⁄₈” Head
2) 2¹⁄₂” Head
B D 1) K
X E 2) J
A
F
G
B
1 NO
1 NC
1 NO + 1NC
2 NO
2 NC
2 NO + 2 NC
Extended Mushroom Head Momentary
Pushbuttons – Non-Illuminated
52P *9*1
52P *9*2
52P *9*3
52P *9*4
52P *9*5
52P *9*6
52P *9*8
Kit All Colors 52P *9*N
••
••
••
•
Chrome
Black Max
B D 1⁵⁄₈” Head
X E 2¹⁄₂” Head
Contact Blocks For All Operators
52BAK
52BAJ
52BJK
52BAH
52BAE
52BAU
52BAR
1)
2)
1 NO
1 NC
1 NO + 1 NC
1 NO Early Make
1 NC Late Break
1 NC Extra Late Break
1 NO + 1 NC 2)
52BAR
Hermetically Sealed, UL Listed for Class 1,
Division 2, .25A Max., 200V AC, 10 Watt
.5A Max., 200V AC, 10 Watt
Mushroom Head Buttons
For Extended Momentery Pushbuttons
52RB3*1
52RB3*2
52RB3*3
52RB3*4
52RB3*5
52RB3*6
52RB3*8
Kit All Colors
52RB3*N
••
••
••
•
D 1⁵⁄₈” Head
E 2¹⁄₂” Head
1)
Illuminated Pushbuttons/Push-to-Test
1 NO + 1 NC
••5252**T6T6**2A
3A 1 NO + 1 NC
1 NO + 1 NC
••5252**T6T6**5A
9A 1 NO + 1 NC
+ 1 NC
••5252**T6T6**BAAA 11 NO
NO + 1 NC
52 *T6*NA 1 NO + 1 NC
AMB
CL
WH
Less Lens
Chrome
BlackMax
1)
B 6-8V Full Voltage 2)
D 24V Full Voltage 2)
G 120V Transformer Type 2) 3)
H 240V Transformer Type 2) 3)
J 480V Transformer Type 2) 3)
K 600V Transformer Type 2) 3)
L 24V LED Module
M 120V LED Module
N 240V LED Module
1) Not available for LED.
2) For LED, add “B” to the end of the assembled number.
3) With 6V lamp.
P
B
Contact Blocks For All Operators
52BAK 1 NO
52BAJ
1 NC
52BJK
1 NO + 1 NC
52BAH 1 NO Early Make
52BAE 1 NC Late Break
52BAU 1 NC Extra Late Break
52BAR 1 NO + 1 NC 2)
1)
2)
Illuminated Pushbutton Lenses
For Illuminated Pushbuttons/Push-to-test
52RA5P2
52RA5P3
52RA5P5
AMB
52RA5P9
CLR
52RA5PA
WH
52RA5PB
••
••
••
52BAR
Hermetically Sealed, UL Listed for Class 1,
Division 2, .25A Max., 200V AC, 10 Watt
.5A Max., 200V AC, 10 Watt
3
A Pushbutton and Mushroom Head Momentary
Non-Illuminated
Cat. No. 52PA8, 52PX8, 52PB9, 52PX9
Installation Instructions
Units are assembled as shown.
1. Assemble oil rings.
2. Mount unit on panel as shown in illustration.
3. Position trim ring or legend plate (trim ring is discarded
when legend plate is used).1)
4. Position index locking ring on unit as shown in illustration.
5. Assemble and tighten lock nut.
6. Position and press on color cap.
B Push-to-Test Illuminated Pushbutton
Cat. No. 52PT6, 52BT6
Installation Instructions
1. Remove lock nut from operator. Mount operator base panel
as shown and tighten to 15 ft. lbs.2)
2. Place lens gasket around lamp, sealing it firmly in a groove
provided.
3. Screw lens into threaded socket of operator base and tighten
by hand.
A
21/8”
21/8”
15/8”
15/8”
15/8”
Oil
Rings
15/8”
This Side
Up
1”
4 3/8”
21/4
11/4
1”
2 3/8”
2 3/8”
Panel
Shaft
11/4
Oil Rings
2 1/4
Color
Cap
Set Screw
3/32 Wrench
.190
.672
.190
21/4
.672
1/16-1/4
Legend plate
or Trim ring
1/16-1/4
Panel
21/4
11/4
Trim ring
or
Legend plate
1.210
Index
Locking Ring
Lock Nut
Index
Locking Ring
1.210
Push-Pull
Head
Lock Nut
Typical spacing shown.
Automotive legend requires 2¹⁄₂” spacing.
Some accessories also require additional spacing.
*Mushroom Head Momentary Operator Mounting.
For Operator Dimensional Drawings See Page 1-6.
B
Installing Guard Accessory (52AAGL)
1. To install guard accessory, replace operator lock nut with lock nut
from guard accessory kit.
2. Screw guard on the operator.
NOTE: The guard is designed to protect the push button from
accidental operation.
1) Second oil ring and trim ring not used on Black Max 4X devices.
2) Spacers and trim ring not used on black 4X devices.
Notes for BlackMax 4X devices:
• The trim ring is not needed or supplied.
• Only use the index locking ring when using a metal nameplate. Discard
when not using a name plate or when using a plastic nameplate.
• Use locknut wrench, 52MAWB.
Volts
6-8*
24
Typical spacing shown.
Automotive legend requires 2¹⁄₂” spacing.
Some accessories also require additional spacing.
A
Non-illuminated momentary
push button flush extended
styles with one contact block
B
Push to test illuminated
push button
1.52
(39)
2.25
(57)
IMPORTANT
THESE INSTRUCTIONS DO NOT PURPORT TO COVER ALL DETAILS OR VARIATIONS
IN EQUIPMENT, NOR TO PROVIDE FOR EVERY POSSIBLE CONTINGENCY TO BE MET
IN CONNECTION WITH INSTALLATION, OPERATION OR MAINTENANCE. SHOULD
FURTHER INFORMATION BE DESIRED OR SHOULD PARTICULAR PROBLEMS ARISE
WHICH ARE NOT COVERED SUFFICIENTLY FOR THE PURCHASER’S PURPOSES,
THE MATTER SHOULD BE REFERRED TO THE LOCAL SIEMENS SALES OFFICE.
1.74
(44)
2.74
(70)
1.09
(28)
1.05
(27)
Legend Plates
THE CONTENTS OF THIS INSTRUCTION MANUAL SHALL NOT BECOME PART OF
OR MODIFY ANY PRIOR OR EXISTING AGREEMENT COMMITMENT OR RELATIONSHIP.
THE SALES CONTRACT CONTAINS THE ENTIRE OBLIGATION OF SIEMENS. THE WARRANTY
CONTAINED IN THE CONTRACT BETWEEN THE PARTIES IS THE SOLE WARRANTY OF
SIEMENS. ANY STATEMENTS CONTAINED HEREIN DO NOT CREATE NEW WARRANTIES
OR MODIFY THE EXISTING WARRANTY.
Large
Hazardous voltage.
Can cause death, serious personal injury, or property damage.
To avoid electrical shock, turn off electrical power to controls
before performing installation maintenance.
4
Jumbo
Automotive
B
Lamps
#755
#1829
Wiring Instructions
(Typical Motor Controller Application)
Siemens Pilot Lights
Components
Operators Only
Complete Units
Pilot Lights
Plastic Lens
52*L4*2
52*L4*3
52*L4*5
AMB
52 *L4*9
CL
52*L4*A
WH
52*L4*B
Less Lens 52*L4*N 1)
••
•
•
••
Chrome
BlackMax
P
B
B 6V Full Voltage 2)
C 12V Full Voltage 1) 2)
D 24V Full Voltage 2)
E 120V Full Voltage 2)
G 120V Transformer 2) 3)
H 240V Transformer 2) 3)
J 480V Transformer 2) 3)
K 600V Transformer 2) 3)
L 24V LED Module 4)
M 120V LED Module 4)
N 240V LED Module 4)
Pilot Lights without Lighting Module
Plastic Lens
52*L4X2
52*L4X3
52*L4X5
AMB
52 *L4X9
CL
52*L4XA
WH
52*L4XB
Less Lens 52*L4XN
••
•••
•
Chrome
BlackMax
P
B
Lighting Modules
Full Voltage
52AAF*2B 1)
52AAF*3B 1)
52AAF*5B 1)
AMB
52AAF*9B
WHT/CLR
52AAF*BB
Incandascent2) 52AAF*B
••
••
•
Transformer
AMB
WHT/CLR
Incandascent2)
••
•
•
••
Chrome
BlackMax
P
B
B 6V Full Voltage 2)
C 12V Full Voltage 1) 2)
D 24V Full Voltage 2)
E 120V Full Voltage 2)
G 120V Transformer 2) 3)
H 240V Transformer 2) 3)
K 600V Transformer 2) 3)
L 24V LED Module 4)
M 120V LED Module 4)
N 240V LED Module 4)
B 6V
D 24V
E 120V
*2B
•• 52AAT
52AAT*3B
*4B
•• 52AAT
52AAT*5B
• 52AAT*BB
Pilot Lights without Lighting Module
Glass Lens
52*L5X2
52*L5X3
52*L5X5
AMB
52 *L5X9
CL
52*L5XA
WH
52*L5XB
Less Lens 52*L5XN
••
•••
•
Chrome
BlackMax
AMB
WHT/CLR
Pilot Light Lenses
52RA4*2
52RA4*3
52RA4*5
AMB
52RA4*9
CLR
52RA4*A
WHT
52RA4*B
••
••
••
S Plastic
T Glass
1)
1)
1)
52AAT*B
G
H
J
K
LED Module
Pilot Lights
Glass Lens
52*L5*2
52*L5*3
52*L5*5
AMB
52 *L5*9
CL
52 *L5* A
WH
52*L5*B
Less Lens 52*L5*N 1)
Operator Specific
Accessories
Lighting Modules
120V
240V
480V
600V
*2
••52AAI
52AAI*3
*4
••52AAI
52AAI*5
•52AAI*B
L 24V
M 120V
N 240V
1)
2)
For cluster LED, replace the last digit “B” with a “Y.”
All colors can be used with incandescent bulb.
P
B
Not available for LED.
For single LED, add ”XB” to end of assembled
number. For cluster LED, add ”XY” to end of
assembled number.
3) With 6V lamp.
4) Integrated LED module utilizes a single LED.
1)
2)
5
Pilot Light
Cat. Nos. 52PL, 52BL
Installation Instructions
Units are assembled as shown.
1. Assemble oil rings.
2. Mount unit on panel as shown in illustration.
2a. When installing a pilot light in a NEMA 4 plastic or non-corrosive
enclosure, a grounding ring and two oil rings must be installed.
See Fig. 1A for placement. (Order kit #52AL109145 which includes
1 ground ring and 1 oil ring).
3. Position trim ring or legend plate (trim ring is discarded when
legend plate is used). 1)
4. Position index locking ring on unit as shown in illustration.
5. Assemble and tighten lock nut to 15 ft. lbs.
1) Trim ring not used on black 4X devices.
Typical spacing shown.
Automotive legend requires 2¹⁄₂” spacing.
Notes for BlackMax 4X devices:
• The trim ring is not needed or supplied.
• Only use the index locking ring when using a metal nameplate. Discard
when not using a name plate or when using a plastic nameplate.
• Use locknut wrench, 52MAWB.
Pilot light, plastic lens, transformer
or full voltage, lighting module
IMPORTANT
THESE INSTRUCTIONS DO NOT PURPORT TO COVER ALL DETAILS OR VARIATIONS
IN EQUIPMENT, NOR TO PROVIDE FOR EVERY POSSIBLE CONTINGENCY TO BE MET
IN CONNECTION WITH INSTALLATION, OPERATION OR MAINTENANCE. SHOULD
FURTHER INFORMATION BE DESIRED OR SHOULD PARTICULAR PROBLEMS ARISE
WHICH ARE NOT COVERED SUFFICIENTLY FOR THE PURCHASER’S PURPOSES,
THE MATTER SHOULD BE REFERRED TO THE LOCAL SIEMENS SALES OFFICE.
THE CONTENTS OF THIS INSTRUCTION MANUAL SHALL NOT BECOME PART OF
OR MODIFY ANY PRIOR OR EXISTING AGREEMENT COMMITMENT OR RELATIONSHIP.
THE SALES CONTRACT CONTAINS THE ENTIRE OBLIGATION OF SIEMENS. THE WARRANTY
CONTAINED IN THE CONTRACT BETWEEN THE PARTIES IS THE SOLE WARRANTY OF
SIEMENS. ANY STATEMENTS CONTAINED HEREIN DO NOT CREATE NEW WARRANTIES
OR MODIFY THE EXISTING WARRANTY.
Pilot light, plastic lens, integral LED,
lighting module
1.85 (47)
1.94 (49)
1.24
(31)
1.70 (43)
1.09
(28)
1.70 (43)
1.24
(31)
3
1
3.49
(89)
1.00
(25)
3
1
3.31
(84)
1.70 (43)
1.70 (43)
Hazardous voltage.
Can cause death, serious personal injury, or property damage.
Pilot light, glass lens, integral LED,
lighting module
To avoid electrical shock, turn off electrical power to controls
before performing installation maintenance.
Pilot light, glass lens, transformer
or full voltage, lighting module
1.85 (47)
1.00
(25)
1.70 (43)
1.70 (43)
1.42
(36)
1.42
(36)
3
1
Legend Plates
3.68
(93)
3.50
(89)
1.70 (43)
Large
6
Jumbo
Automotive
1.63 (41)
1.94 (47)
1.09
(28)
Siemens Twist-to-Release Units
Components
Operators Only
Complete Units
Operator Specific
Accessories
Contact Blocks
1)
Twist-to-Release
Non-Illuminated
52*R8W2A
52*R8W3A
52*R8W5A
••
•
Chrome
BlackMax
1 NO + 1 NC
1 NO + 1 NC
1 NO + 1 NC
P
B
Twist-to-Release
Non-Illuminated
52*R8W2
52*R8W3
52*R8W5
••
•
Chrome
BlackMax
P
B
1 3/4” Mushroom Head – Plastic
For Non-Illuminated Twist-to-Release
52RC3R2
52RC3R3
52RC3R5
Contact Blocks For All Operators
52BAK
52BAJ
52BJK
52BAH
52BAE
52BAU
52BAR
1)
••
•
1 NO
1 NC
1 NO + 1 NC
1 NO Early Make
1 NC Late Break
1 NC Extra Late Break
1 NO + 1 NC 1)
Hermetically Sealed, UL Listed for Class 1,
Division 2, .25A Max., 150V AC, 10 Watt
.5A Max., 150V AC, 10 Watt
1)
Twist-to-Release
Illuminated
52*R8*RA
52*R8*SA
AMB
52*R8*TA
••
•
Chrome
BlackMax
P
B
B
C
D
E
G
H
J
K
L
M
N
1 NO + 1 NC
1 NO + 1 NC
1 NO + 1 NC
6V Full Voltage 2)
12V Full Voltage 1) 2)
24V Full Voltage 2)
120V Full Voltage 2)
120V Transformer Type 2) 3)
240V Transformer Type 2) 3)
480V Transformer Type 2) 3)
600V Transformer Type 2) 3)
24V LED Module 4)
120V LED Module 4)
240V LED Module 4)
Not available for LED.
For single LED, add ”B” to end of the assembled
number.
3) With 6V lamp.
4) Integrated LED module utilizes a single LED.
1)
2)
Twist-to-Release
Illuminated
52*R8*R
52*R8*S
AMB
52*R8*T
••
•
Chrome
BlackMax
P
B
B
C
D
E
G
H
J
K
L
M
N
6V Full Voltage 4)
12V Full Voltage 1) 4)
24V Full Voltage 4)
120V Full Voltage 4)
120V Transformer Type 4) 2)
240V Transformer Type 4) 2)
480V Transformer Type 4) 2)
600V Transformer Type 4) 2)
24V LED Module 3)
120V LED Module 3)
240V LED Module 3)
Contact Blocks For All Operators
52BAK
52BAJ
52BJK
52BAH
52BAE
52BAU
52BAR
1)
1 NO
1 NC
1 NO + 1 NC
1 NO Early Make
1 NC Late Break
1 NC Extra Late Break
1 NO + 1 NC 1)
1 3/4” Mushroom Head – Plastic
For Illuminated Twist-to-Release
52RC3RR
52RC3RS
AMB
52RC3RT
••
•
Hermetically Sealed, UL Listed for Class 1,
Division 2, .25A Max., 150V AC, 10 Watt
.5A Max., 150V AC, 10 Watt
1) Not available for LED.
2) With 6V lamp.
3) Integrated LED module utilizes a single LED.
4) For a single LED, add “XB” to end of the assembled
number.
7
Twist-to-Release Unit
Cat. No. 52PR8, 52BR8
A illuminated
B Non-illuminated
Installation Instructions
1. Remove push-pull head (turn counter clockwise to loosen)
2. Remove locknut, lock ring, and trim ring.
3. Mount unit in panel as shown. Secure locknut to 15 ft.-lbs.
4. Replace push-pull head. Make sure gasket in in place.
Contact Operation
1. For normally open contacts, use 52BAK contact block
2. For normally closed contacts, use 52BAJ contact block
Notes for BlackMax 4X devices:
• The trim ring is not needed or supplied.
• Only use the index locking ring when using a metal nameplate. Discard
when not using a name plate or when using a plastic nameplate.
• Use locknut wrench, 52MAWB.
IMPORTANT
THESE INSTRUCTIONS DO NOT PURPORT TO COVER ALL DETAILS OR VARIATIONS
IN EQUIPMENT, NOR TO PROVIDE FOR EVERY POSSIBLE CONTINGENCY TO BE MET
IN CONNECTION WITH INSTALLATION, OPERATION OR MAINTENANCE. SHOULD
FURTHER INFORMATION BE DESIRED OR SHOULD PARTICULAR PROBLEMS ARISE
WHICH ARE NOT COVERED SUFFICIENTLY FOR THE PURCHASER’S PURPOSES,
1
THE MATTER SHOULD BE REFERRED TO THE LOCAL SIEMENS SALES OFFICE.
THE CONTENTS OF THIS INSTRUCTION MANUAL SHALL NOT BECOME PART OF
OR MODIFY ANY PRIOR OR EXISTING AGREEMENT COMMITMENT OR RELATIONSHIP.
THE SALES CONTRACT CONTAINS THE ENTIRE OBLIGATION OF SIEMENS. THE WARRANTY
CONTAINED IN THE CONTRACT BETWEEN THE PARTIES IS THE SOLE WARRANTY OF
SIEMENS. ANY STATEMENTS CONTAINED HEREIN DO NOT CREATE NEW WARRANTIES
OR MODIFY THE EXISTING WARRANTY.
Typical spacing shown.
Automotive legend requires 2¹⁄₂”
spacing.
Some accessories also require additional spacing.
1
Illuminated twist-to-release
full voltage or transformer
Illuminated twist-to-release
LED module
Ø1.79 (45)
Ø1.79 (45)
1.75
(45)
2.25
(57)
1.74
(44)
1.09
(28)
Ø1.79 (45)
1.75
(45)
1.75
(45)
1.74
(44)
2.01
(51)
2.74
(70)
Hazardous voltage.
Can cause death, serious personal injury, or property damage.
1.74
(44)
2.74
(70)
1.00
(25)
1.05
(27)
1.05
(27)
To avoid electrical shock, turn off electrical power to controls
before performing installation maintenance.
Legend Plates
Large
8
Non-illuminated twist-to-release
Jumbo
Automotive
2.74
(70)
1.05
(27)
2.10 (53)
Siemens Selector Switches – 2-Position
Components
Operators Only
Complete Units
Operator Specific
Accessories
Contact Blocks
1)
2-Position Selector Switch
Non-Illuminated
Maintained “A” Cam
52S*2AAB*1
2-Position Selector Switch
Non-Illuminated
Maintained “A” Cam
52S*2AAB
Chrome Short Lever A
Chrome Long Lever B
Black Max Short Lever X
Black Max Long Lever W
Chrome Short Lever
Chrome Long Lever
Black Max Short Lever
Black Max Long Lever
•
K 1 NO
J 1 NC
A 1 NO + 1 NC
•
A
B
X
W
Spring Return From Right “A” Cam
52S*2ACB*1
Spring Return From Right “A” Cam
52S*2ACB
Chrome Short Lever A
Chrome Long Lever B
Black Max Short Lever X
Black Max Long Lever W
Chrome Short Lever
Chrome Long Lever
Black Max Short Lever
Black Max Long Lever
•
K 1 NO
J 1 NC
A 1 NO + 1 NC
•
A
B
X
W
Contact Blocks For All Operators
52BAK
52BAJ
52BJK
52BAH
52BAE
52BAU
52BAR
Lever Inserts
For Selector Switches
52RA2*2
52RA2*3
52RA2*4
52RA2*5
52RA2*6
52RA2*8
WHT
52RA2*B
••
••
••
•
1 NO
1 NC
1 NO + 1 NC
1 NO Early Make
1 NC Late Break
1 NC Extra Late Break
1 NO + 1 NC 2)
1) 52BAR
2) Hermetically Sealed, UL Listed for Class 1,
A Short Lever
B Long Lever
Division 2, .25A Max., 200V AC, 10 Watt
.5A Max., 200V AC, 10 Watt
1)
2-Position Selector Switch
Illuminated
Maintained “A” Cam
52SA7A*2A0
1 NO + 1 NC
52SA7A*2A0
1 NO + 1 NC
AMB
52SA7A*2A0
1 NO + 1 NC
••
•
2-Position Selector Switch without Lens
Illuminated
Maintained “A” Cam
52SA7A*N
D 24V Full Voltage
G 120V Transformer
H 240V Transformer
D 24V Full Voltage
G 120V Transformer
H 240V Transformer
Contact Blocks For All Operators
52BAK
52BAJ
52BJK
52BAH
52BAE
52BAU
52BAR
Lens Kit (Knob plus Insert)
For Illuminated Selector Switches
52RA6P2
52RA6P3
52RA6P5
AMB
52RA6P9
CLR
52RA6PA
WHT
52RA6PB
••
••
••
1 NO
1 NC
1 NO + 1 NC
1 NO Early Make
1 NC Late Break
1 NC Extra Late Break
1 NO + 1 NC 2)
1) 52BAR
2) Hermetically Sealed, UL Listed for Class 1,
Division 2, .25A Max., 200V AC, 10 Watt
.5A Max., 200V AC, 10 Watt
1)
2-Position Key Selector Switch
Maintained “A” Cam
52SC6AF*1
•
K 1 NO
J 1 NC
A 1 NO + 1 NC
Spring Return From Right “A” Cam
52SC6AX*1
•
K 1 NO
J 1 NC
A 1 NO + 1 NC
2-Position Key Selector Switch
Maintained “A” Cam
52SC6A*
•
E All Key Removal
F Left Key Removal
Contact Blocks For All Operators
52BAK
52BAJ
52BJK
52BAH
52BAE
52BAU
52BAR
1 NO
1 NC
1 NO + 1 NC
1 NO Early Make
1 NC Late Break
1 NC Extra Late Break
1 NO + 1 NC 2)
1) 52BAR
2) Hermetically Sealed, UL Listed for Class 1,
Division 2, .25A Max., 200V AC, 10 Watt
.5A Max., 200V AC, 10 Watt
9
A Selector Operators — Non-Illuminated
A Selector Operators — Non-illuminated
Cat. No. 52SA2, 52SB2, 52SX2, 52SW2 and 52SC6
For Contact and Cam Selection for Non-Illuminated Selector and Key
Operators, see Page 1-28
21/8”
15/8”
15/8”
B Selector Operators — Illuminated
1”
Cat. No. 52SA7
For Contact and Cam Selection for Illuminated Selector Operators,
see Page 1-28
Installation Instructions
Units are assembled as shown.
1. Position and press in color insert if required.
2. Assemble oil rings.
3. Mount unit on panel as shown in the illustration.
4. Position trim ring or legend plate (trim ring is discarded when
legend plate is used).1)
5. Position index locking ring on unit as shown in illustration. 2)
6. Assemble and tighten lock nut to 15 ft. lbs.
43/8”
23/8”
To add another color insert, remove
unit from panel and pry out white
insert with small screwdriver. Snap
in new color insert.
Typical spacing shown.
Automotive legend requires 2¹⁄₂” spacing.
1) Trim ring not used on black 4X devices.
2) Locking ring not needed with plastic legend plates.
Notes for BlackMax 4X devices:
• The trim ring is not needed or supplied.
• Only use the index locking ring when using a metal nameplate. Discard
when not using a name plate or when using a plastic nameplate.
• Use locknut wrench, 52MAWB.
IMPORTANT
THESE INSTRUCTIONS DO NOT PURPORT TO COVER ALL DETAILS OR VARIATIONS
IN EQUIPMENT, NOR TO PROVIDE FOR EVERY POSSIBLE CONTINGENCY TO BE MET
IN CONNECTION WITH INSTALLATION, OPERATION OR MAINTENANCE. SHOULD
FURTHER INFORMATION BE DESIRED OR SHOULD PARTICULAR PROBLEMS ARISE
WHICH ARE NOT COVERED SUFFICIENTLY FOR THE PURCHASER’S PURPOSES,
THE MATTER SHOULD BE REFERRED TO THE LOCAL SIEMENS SALES OFFICE.
THE CONTENTS OF THIS INSTRUCTION MANUAL SHALL NOT BECOME PART OF
OR MODIFY ANY PRIOR OR EXISTING AGREEMENT COMMITMENT OR RELATIONSHIP.
THE SALES CONTRACT CONTAINS THE ENTIRE OBLIGATION OF SIEMENS. THE WARRANTY
CONTAINED IN THE CONTRACT BETWEEN THE PARTIES IS THE SOLE WARRANTY OF
SIEMENS. ANY STATEMENTS CONTAINED HEREIN DO NOT CREATE NEW WARRANTIES
OR MODIFY THE EXISTING WARRANTY.
Hazardous voltage.
Can cause death, serious personal injury, or property damage.
B Selector Operators — Illuminated
115/16”
15/8”
15/8”
Volts
6-8*
24
120
1”
43/8”
Lamps
#755
#1829
#120MB
*Also transformer type
23/8”
Typical spacing shown.
Automotive legend requires 2¹⁄₂” spacing.
Selector switches and keyed
selector switches illuminated
and non-illuminated
Legend Plates
To avoid electrical shock, turn off electrical power to controls
before performing installation maintenance.
Large
10
Jumbo
Automotive
Siemens Selector Switches – 3-Position
Components
Operators Only
Complete Units
3-Position Selector Switch
Non-Illuminated
Maintained
52S*2 * AB *
•
Chrome Short Lever
Chrome Long Lever
Black Max Short Lever
Black Max Long Lever
A C 1)
B G 1)
X
W
Operator Specific
Accessories
Contact Blocks
3-Position Selector Switch
Non-Illuminated
Maintained
52S*2 * AB
A1 1 NO + 1 NC
A2 2 NO + 2 NC
J2K12 NC + 1 NO
•
Chrome Short Lever
Chrome Long Lever
Black Max Short Lever
Black Max Long Lever
A
B
X
W
1) Cam code
B 1)
C 1)
D 1)
E 1)
G 1)
1)
1) Cam code
Spring Return From Right
52S*2 * CB *
•
Chrome Short Lever
Chrome Long Lever
Black Max Short Lever
Black Max Long Lever
A C 1)
B G 1)
X J2
W
A1
A2
K1
Spring Return From Right
52S*2 * CB
1 NO + 1 NC
2 NO + 2 NC
2 NC + 1 NO
•
Chrome Short Lever
Chrome Long Lever
Black Max Short Lever
Black Max Long Lever
A
B
X
W
B 1)
C 1)
D 1)
E 1)
G 1)
1) Cam code
1) Cam code
Spring Return From Left
52S*2 * BB *
•
Chrome Short Lever
Chrome Long Lever
Black Max Short Lever
Black Max Long Lever
A C 1)
B G 1)
X
W
A1 1 NO + 1 NC
A2 2 NO + 2 NC
J2K1 2 NC + 1 NO
1) Cam code
Spring Return From Left
52S*2 * BB
•
Chrome Short Lever
Chrome Long Lever
Black Max Short Lever
Black Max Long Lever
A
B
X
W
B 1)
C 1)
D 1)
E 1)
G 1)
Lever Inserts
For Selector Switches
52RA2*2
52RA2*3
52RA2*4
52RA2*5
52RA2*6
52RA2*8
WHT
52RA2*B
Contact Blocks For All Operators
52BAK
52BAJ
52BJK
52BAH
52BAE
52BAU
52BAR
••
••
•••
1 NO
1 NC
1 NO + 1 NC
1 NO Early Make
1 NC Late Break
1 NC Extra Late Break
1 NO + 1 NC 2)
1) 52BAR
2) Hermetically Sealed, UL Listed for Class 1,
A Short Lever
B Long Lever
Division 2, .25A Max., 200V AC, 10 Watt
.5A Max., 200V AC, 10 Watt
1) Cam code
Spring Return From Right and Left
52S*2 * DB *
•
Chrome Short Lever
Chrome Long Lever
Black Max Short Lever
Black Max Long Lever
A C 1)
B G 1)
X
W
A1 1 NO + 1 NC
A2 2 NO + 2 NC
J2K1 2 NC + 1 NO
Spring Return From Right and Left
52S*2 * DB
•
Chrome Short Lever
Chrome Long Lever
Black Max Short Lever
Black Max Long Lever
A
B
X
W
B 1)
C 1)
D 1)
E 1)
G 1)
1) Cam code
1) Cam code
1)
3-Position Selector Switch
Illuminated
Maintained
52SA7* * 2
52SA7* * 3
52SA7* * 9
3-Position Selector Switch without Lens
Illuminated
Maintained
52SA7* *N
B 1) D 24V Full Voltage
C 1) G 120V Full Voltage
Transformer
H 240V Transformer
B 1) D 24V Full Voltage
C 1) G 120V Transformer
H 240V Transformer
1) Cam code
1) Cam code
Contact Blocks For All Operators
52BAK
52BAJ
52BJK
52BAH
52BAE
52BAU
52BAR
1 NO
1 NC
1 NO + 1 NC
1 NO Early Make
1 NC Late Break
1 NC Extra Late Break
1 NO + 1 NC 2)
Lens Kit (Knob plus Insert)
For Illuminated Selector Switches
AMB
CL
WH
••52RA6P2
52RA6P3
52RA6P5
•
52RA6P9
•
•• 52RA6PA
52RA6PB
1) 52BAR
2) Hermetically Sealed, UL Listed for Class 1,
Division 2, .25A Max., 200V AC, 10 Watt
.5A Max., 200V AC, 10 Watt
11
A Selector Operators — Non-illuminated
A Selector Operators — Non-illuminated
Cat. No. 52SA2, 52SB2, 52SX2, 52SW2 and 52SC6
For Contact and Cam Selection for Non-Illuminated Selector and Key
Operators, see Page 1-28
21/8”
15/8”
15/8”
B Selector Operators — Illuminated
1”
Cat. No. 52SA7
For Contact and Cam Selection for Illuminated Selector Operators,
see Page 1-28
Installation Instructions
Units are assembled as shown.
1. Position and press in color insert if required.
2. Assemble oil rings.
3. Mount unit on panel as shown in the illustration.
4. Position trim ring or legend plate (trim ring is discarded when
legend plate is used).1)
5. Position index locking ring on unit as shown in illustration.2)
6. Assemble and tighten lock nut to 15 ft. lbs.
1) Trim ring not used on black 4X devices.
2) Locking ring not needed with plastic legend plates.
Notes for BlackMax 4X devices:
• The trim ring is not needed or supplied.
• Only use the index locking ring when using a metal nameplate. Discard
when not using a name plate or when using a plastic nameplate.
• Use locknut wrench, 52MAWB.
IMPORTANT
THESE INSTRUCTIONS DO NOT PURPORT TO COVER ALL DETAILS OR VARIATIONS
IN EQUIPMENT, NOR TO PROVIDE FOR EVERY POSSIBLE CONTINGENCY TO BE MET
IN CONNECTION WITH INSTALLATION, OPERATION OR MAINTENANCE. SHOULD
FURTHER INFORMATION BE DESIRED OR SHOULD PARTICULAR PROBLEMS ARISE
WHICH ARE NOT COVERED SUFFICIENTLY FOR THE PURCHASER’S PURPOSES,
THE MATTER SHOULD BE REFERRED TO THE LOCAL SIEMENS SALES OFFICE.
THE CONTENTS OF THIS INSTRUCTION MANUAL SHALL NOT BECOME PART OF
OR MODIFY ANY PRIOR OR EXISTING AGREEMENT COMMITMENT OR RELATIONSHIP.
THE SALES CONTRACT CONTAINS THE ENTIRE OBLIGATION OF SIEMENS. THE WARRANTY
CONTAINED IN THE CONTRACT BETWEEN THE PARTIES IS THE SOLE WARRANTY OF
SIEMENS. ANY STATEMENTS CONTAINED HEREIN DO NOT CREATE NEW WARRANTIES
OR MODIFY THE EXISTING WARRANTY.
Hazardous voltage.
Can cause death, serious personal injury, or property damage.
43/8”
23/8”
To add another color insert, remove
unit from panel and pry out white
insert with small screwdriver. Snap
in new color insert.
Typical spacing shown.
Automotive legend requires 2¹⁄₂” spacing.
B Selector Operators — Illuminated
115/16”
15/8”
15/8”
Volts
6-8*
24
120
1”
43/8”
Lamps
#755
#1829
#120MB
*Also transformer type
23/8”
Typical spacing shown.
Automotive legend requires 2¹⁄₂” spacing.
Selector switches and keyed
selector switches illuminated
and non-illuminated
Legend Plates
To avoid electrical shock, turn off electrical power to controls
before performing installation maintenance.
Large
12
Jumbo
Automotive
Siemens Selector Switches – 3-Position
Components
Operators Only
Complete Units
3-Position Key Selector Switch
Maintained
••52SC6CEA1
52SC6CEJ2K1
•52SC6CEA2
1 NO + 1 NC
1 NO + 2 NC
2 NO + 2 NC
Operator Specific
Accessories
Contact Blocks
3-Position Key Selector Switch
Maintained
52SC6 * *
•
1) Cam Code
B 1)
C 1)
D 1)
E 1)
G 1)
E
F
G
H
J
All Key Removal
Left Key Removal
Right Key Removal
Center Key Removal
Left and Right Key
Removal
K Left and Center
Key Removal
M Right and Center
Key Removal
1)
Spring Return From Right
52SC6CZA1
1 NO + 1 NC
52SC6GZJ2K1
1 NO + 2 NC
52SC6CZA2
2 NO + 2 NC
••
•
Spring Return From Right
52SC6 * *
•
B 1) U Center Key Removal
C 1) Z Left and Center
Key Removal
D 1)
E 1)
G 1)
1) Cam Code
Spring Return From Left
52SC6 * *
•
1) Cam Code
Spring Return From Right and Left
52SC6CVA1
1 NO + 1 NC
52SC6GVJ2K1 1 NO + 2 NC
52SC6CVA2
2 NO + 2 NC
••
•
B 1) T
C 1) W
D1) Y
E 1)
G1)
Contact Blocks For All Operators
52BAK 1 NO
52BAJ 1 NC
52BJK 1 NO + 1 NC
52BAH 1 NO Early Make
52BAE 1 NC Late Break
52BAU 1 NC Extra Late Break
52BAR 1 NO + 1 NC 2)
1) 52BAR
2) Hermetically Sealed, UL Listed for Class 1,
Division 2, .25A Max., 200V AC, 10 Watt
.5A Max., 200V AC, 10 Watt
Center Key Removal
Right Key Removal
Right and Center
Key Removal
Spring Return From Right and Left
52SC6 * *
•
B 1) V Center Key Removal
C 1)
D 1)
E 1)
G 1)
1) Cam Code
13
Selector Operators — Non-Illuminated
Cat. No. 52SC6
For Contact and Cam Selection for Non-Illuminated Selector
and Key Operators, see Page 1-28.
Installation Instructions
Units are assembled as shown.
1. Position and press in color insert if required.
2. Assemble oil rings.
3. Mount unit on panel as shown in the illustration.
4. Position trim ring or legend plate (trim ring is discarded
when legend plate is used). 1)
5. Position index locking ring on unit as shown in illustration. 2)
6. Assemble and tighten lock nut to 15 ft. lbs.
21/8”
15/8”
15/8”
1”
43/8”
23/8”
1) Trim ring not used on black 4X devices.
2) Locking ring not needed with plastic legend plates
Notes for BlackMax 4X devices:
• The trim ring is not needed or supplied.
• Only use the index locking ring when using a metal nameplate. Discard
when not using a name plate or when using a plastic nameplate.
• Use locknut wrench, 52MAWB.
IMPORTANT
THESE INSTRUCTIONS DO NOT PURPORT TO COVER ALL DETAILS OR VARIATIONS
IN EQUIPMENT, NOR TO PROVIDE FOR EVERY POSSIBLE CONTINGENCY TO BE MET
IN CONNECTION WITH INSTALLATION, OPERATION OR MAINTENANCE. SHOULD
FURTHER INFORMATION BE DESIRED OR SHOULD PARTICULAR PROBLEMS ARISE
WHICH ARE NOT COVERED SUFFICIENTLY FOR THE PURCHASER’S PURPOSES,
THE MATTER SHOULD BE REFERRED TO THE LOCAL SIEMENS SALES OFFICE.
THE CONTENTS OF THIS INSTRUCTION MANUAL SHALL NOT BECOME PART OF
OR MODIFY ANY PRIOR OR EXISTING AGREEMENT COMMITMENT OR RELATIONSHIP.
THE SALES CONTRACT CONTAINS THE ENTIRE OBLIGATION OF SIEMENS. THE WARRANTY
CONTAINED IN THE CONTRACT BETWEEN THE PARTIES IS THE SOLE WARRANTY OF
SIEMENS. ANY STATEMENTS CONTAINED HEREIN DO NOT CREATE NEW WARRANTIES
OR MODIFY THE EXISTING WARRANTY.
Hazardous voltage.
Can cause death, serious personal injury, or property damage.
To avoid electrical shock, turn off electrical power to controls
before performing installation maintenance.
14
To add another color insert, remove
unit from panel and pry out white
insert with small screwdriver. Snap
in new color insert.
Selector switches and keyed
selector switches illuminated
and non-illuminated
Typical spacing shown.
Automotive legend requires 2¹⁄₂” spacing.
Legend Plates
Large
Jumbo
Automotive
Siemens Selector Switches — 4-Position and Specialty
Complete Units
Components
Operators Only
Operator Specific
Accessories
Contact Blocks
1)
4-Position Selector Switch
Non-Illuminated
Maintained
52S*2HAB
•
Chrome Short Lever
Chrome Long Lever
Black Max Short Lever
Black Max Long Lever
A
B
X
W
Contact Blocks For All Operators
52BAK
52BAJ
52BJK
52BAH
52BAE
52BAU
52BAR
1 NO
1 NC
1 NO + 1 NC
1 NO Early Make
1 NC Late Make
1 NC Extra Late Break
1 NO + 1 NC 2)
1) 52BAR
2) Hermetically Sealed, UL Listed for Class 1,
Division 2, .25A Max., 200V AC, 10 Watt
.5A Max., 200V AC, 10 Watt
Select/Push Operator
Non-Illuminated
Maintained
52SA** 1
52SA** 2
Flush
Raised
••
3 P 1)
4 Q 1)
R 1)
S 1)
1) Cam code
15
Selector Operators — Non-Illuminated
Cat. No. 52SA2H, 52SB2H, 52SX2H, 52SW2H, 52SA3, 52SA4
For Contact and Cam Selection for Non-Illuminated Selector
and Key Operators, see Page 1-28.
Installation Instructions
Units are assembled as shown.
1. Position and press in color insert if required.
2. Assemble oil rings.
3. Mount unit on panel as shown in the illustration.
4. Position trim ring or legend plate (trim ring is discarded
when legend plate is used). 1)
5. Position index locking ring on unit as shown in illustration. 2)
6. Assemble and tighten lock nut to 15 ft. lbs.
21/8”
15/8”
15/8”
1”
43/8”
23/8”
1) Trim ring not used on black 4X devices.
2) Locking ring not needed with plastic legend plates
Notes for BlackMax 4X devices:
• The trim ring is not needed or supplied.
• Only use the index locking ring when using a metal nameplate. Discard
when not using a name plate or when using a plastic nameplate.
• Use locknut wrench, 52MAWB.
IMPORTANT
THESE INSTRUCTIONS DO NOT PURPORT TO COVER ALL DETAILS OR VARIATIONS
IN EQUIPMENT, NOR TO PROVIDE FOR EVERY POSSIBLE CONTINGENCY TO BE MET
IN CONNECTION WITH INSTALLATION, OPERATION OR MAINTENANCE. SHOULD
FURTHER INFORMATION BE DESIRED OR SHOULD PARTICULAR PROBLEMS ARISE
WHICH ARE NOT COVERED SUFFICIENTLY FOR THE PURCHASER’S PURPOSES,
THE MATTER SHOULD BE REFERRED TO THE LOCAL SIEMENS SALES OFFICE.
To add another color insert, remove
unit from panel and pry out white
insert with small screwdriver. Snap
in new color insert.
Selector Push Operator
Typical spacing shown.
Automotive legend requires 2¹⁄₂” spacing.
Legend Plates
THE CONTENTS OF THIS INSTRUCTION MANUAL SHALL NOT BECOME PART OF
OR MODIFY ANY PRIOR OR EXISTING AGREEMENT COMMITMENT OR RELATIONSHIP.
THE SALES CONTRACT CONTAINS THE ENTIRE OBLIGATION OF SIEMENS. THE WARRANTY
CONTAINED IN THE CONTRACT BETWEEN THE PARTIES IS THE SOLE WARRANTY OF
SIEMENS. ANY STATEMENTS CONTAINED HEREIN DO NOT CREATE NEW WARRANTIES
OR MODIFY THE EXISTING WARRANTY.
Large
Hazardous voltage.
Can cause death, serious personal injury, or property damage.
To avoid electrical shock, turn off electrical power to controls
before performing installation maintenance.
Selector switches and keyed
selector switches illuminated
and non-illuminated
16
Jumbo
Automotive
Siemens Push-Pull Units
Complete Units
Components
Operators Only
Operator Specific
Accessories
Contact Blocks
1)
2-Position Push-Pull; Maintained
Non-Illuminated
1³⁄₄” Metal Mushroom Head
Less Head 52*P2AZA
1 NO + 1 NC
MTL
52*P2A2A 1 NO + 1 NC
MTL
52*P2A3A 1 NO + 1 NC
MTL
52*P2ACA 1 NO + 1 NC
2-Position Push-Pull; Maintained
Non-Illuminated
1³⁄₄” Metal Mushroom Head
Less Head
52*P2AZ
MTL
52*P2A2
MTL
52*P2A3
MTL
52*P2AC
Chrome
BlackMax
Chrome
BlackMax
•••
P
B
••
•
P
B
1³⁄₄” Plastic Mushroom Head
Less Head 52*P2WZA 1 NO + 1 NC
52*P2W1A 1 NO + 1 NC
52*P2W2A 1 NO + 1 NC
52*P2W3A 1 NO + 1 NC
1³⁄₄” Plastic Mushroom Head
Less Head
52*P2WZ
52*P2W1
52*P2W2
52*P2W3
Chrome
BlackMax
Chrome
BlackMax
••
•
P
B
2¹⁄₂” Plastic Mushroom Head
Less Head 52*P2VZA
1 NO + 1 NC
52*P2V1A 1 NO + 1 NC
52*P2V2A 1 NO + 1 NC
52*P2V3A 1 NO + 1 NC
••
•
Chrome
BlackMax
P
B
3-Position Push-Pull; Momentary
Non-Illuminated
1³⁄₄” Metal Mushroom Head
Less Head 52*P3AZU 1 NO + 1 NCXLB1)
3TL
52*P3A1U 1 NO + 1 NCXLB1)
CTL
52*P3A2U 1 NO + 1 NCXLB1)
MTL
52*P3A3U 1 NO + 1 NCXLB1)
••
•
Chrome
Black Max
P
B
1³⁄₄” Plastic Mushroom Head
Less Head 52*P3WZU 1 NO + 1 NCXLB1)
52*P3W1U 1 NO + 1 NCXLB1)
52*P3W2U 1 NO + 1 NCXLB1)
52*P3W3U 1 NO + 1 NCXLB1)
••
•
Chrome
BlackMax
••
•
Chrome
BlackMax
52BAK
52BAJ
52BJK
52BAH
52BAE
52BAU
52BAR
1 NO
1 NC
1 NO + 1 NC
1 NO Early Make
1 NC Late Break
1 NC Extra Late Break
1 NO + 1 NC 2)
1) 52BAR
2) Hermetically Sealed, UL Listed for Class 1,
Division 2, .25A Max., 200V AC, 10 Watt
.5A Max., 200V AC, 10 Watt
1³⁄₄” Mushroom Head – Plastic
For Non-Illuminated Push-Pull
52RC3D1
52RC3D2
52RC3D3
52RC3D4
52RC3D5
52RC3D6
52RC3D8
Kit All Colors 52RC3DN
••
••
••
•
P
B
2¹⁄₂” Plastic Mushroom Head
Less Head
52*PAVZ
52*P2V1
52*P2V2
52*P2V3
••
•
Contact Blocks For All Operators
P
B
1³⁄₄” Mushroom Head – Metal
For Non-Illuminated Push-Pull
MTL
52RC2FC
MTL
52RC2F2
MTL
52RC2F3
••
•
2¹⁄₂ “ Mushroom Head – Plastic
For Non-Illuminated Push-Pull
52RC3E1
52RC3E2
52RC3E3
52RC3E4
52RC3E5
52RC3E6
52RC3E8
Kit All Colors 52RC3EN
••
••
••
•
P
B
2¹⁄₂” (57.2mm) Plastic Mushroom Head
Less Head 52*P3VZU 1 NO + 1 NCXLB1)
52*P3V1U 1 NO + 1 NCXLB1)
52*P2V2U 1 NO + 1 NCXLB1)
52*PCV3U 1 NO + 1 NCXLB1)
••
•
Chrome
Black Max
P
B
1) Blocks cannot be interchanged (start-stop) circuit.
17
Non-Illuminated Push-Pull Operators
2 Position Maintained, 3 Position Momentary
Cat. No. 52PP2A, 52PP2W, 52PP2V, 52PP3A, 52PP3W, 52PP3V, 52BP2A,
52BP2W, 52BP2V, 52BP3A, 52BP3W, 52BP3V
Installation Instructions
1. Remove push-pull head (turn counter clockwise to loosen).
2. Remove locknut, lock ring, and trim ring.
3. Mount unit in panel as shown. Secure locknut to 15 ft.-lbs.
4. Replace push-pull head. Make sure gasket in in place.
Contact Operation
Maintained Push-Pull
1. For normally open contacts, use 52BAK contact block.
2. For normally closed contacts, use 52BAJ contact block.
Momentary Push-Pull (Factory assembled)
1. For normally open contacts, the 52BAJ (normally closed)
contact block is used. When mounted on this operator, the contact
block becomes normally open.
2. For normally closed contacts, the special 52BAU contact block is used.
This contact block must be mounted last.
Notes for BlackMax 4X devices:
• The trim ring is not needed or supplied.
• Only use the index locking ring when using a metal nameplate. Discard
when not using a name plate or when using a plastic nameplate.
• Use locknut wrench, 52MAWB.
IMPORTANT
THESE INSTRUCTIONS DO NOT PURPORT TO COVER ALL DETAILS OR VARIATIONS
IN EQUIPMENT, NOR TO PROVIDE FOR EVERY POSSIBLE CONTINGENCY TO BE MET
IN CONNECTION WITH INSTALLATION, OPERATION OR MAINTENANCE. SHOULD
FURTHER INFORMATION BE DESIRED OR SHOULD PARTICULAR PROBLEMS ARISE
WHICH ARE NOT COVERED SUFFICIENTLY FOR THE PURCHASER’S PURPOSES,
THE MATTER SHOULD BE REFERRED TO THE LOCAL SIEMENS SALES OFFICE.
THE CONTENTS OF THIS INSTRUCTION MANUAL SHALL NOT BECOME PART OF
OR MODIFY ANY PRIOR OR EXISTING AGREEMENT COMMITMENT OR RELATIONSHIP.
THE SALES CONTRACT CONTAINS THE ENTIRE OBLIGATION OF SIEMENS. THE WARRANTY
CONTAINED IN THE CONTRACT BETWEEN THE PARTIES IS THE SOLE WARRANTY OF
SIEMENS. ANY STATEMENTS CONTAINED HEREIN DO NOT CREATE NEW WARRANTIES
OR MODIFY THE EXISTING WARRANTY.
Typical spacing shown.
Automotive legend requires 2¹⁄₂” spacing.
Some accessories also require additional spacing.
1 3/4" mushroom
head push-pull
non-illuminated
2 1/2" mushroom
head push-pull
non-illuminated
Ø1.75 (44)
Ø2.50 (64)
1.75
(45)
1.75
(45)
1.74
(44)
1.74
(44)
2.74
(70)
2.74
(70)
1.05
(27)
2.10 (53)
1.05
(27)
2.10 (53)
Legend Plates
Hazardous voltage.
Can cause death, serious personal injury, or property damage.
To avoid electrical shock, turn off electrical power to controls
before performing installation maintenance.
18
Large
Automotive
Siemens Push-Pull Units
Components
Operators Only
Complete Units
Operator Specific
Accessories
Contact Blocks
1)
2-Position Push-Pull; Maintained
Illuminated
1 ³⁄₄” Metal Mushroom Head
Less Head 52*P2*ZA 1 NO + 1 NC
52*P2*2A 1 NO + 1 NC
52*P2*3A 1 NO + 1 NC
AMB
52*P2*9A 1 NO + 1 NC
••
•
Chrome
BlackMax
P
B
D
G
H
J
K
L
M
N
24V Full Voltage 1)
120V Transformer 1) 2)
240V Transformer 1) 2)
480V Transformer 1) 2)
600V Transformer 1) 2)
24V LED Module 3)
120V LED Module 3)
240V LED Module 3)
1 ³⁄₄” Plastic Mushroom Head
Less Head 52*P2*ZA 1 NO + 1 NC
52*P2*RA 1 NO + 1 NC
52*P2*SA 1 NO + 1 NC
AMB
52*P2*TA 1 NO + 1 NC
••
•
Chrome
BlackMax
P
B
D
G
L
M
24V Full Voltage 1)
120V Transformer 1) 2)
24V LED Module 3)
120V LED Module 3)
2 ¹⁄₂” Plastic Mushroom Head
Less Head 52*P2*PA 1 NO + 1 NC
52*P2*DA 1 NO + 1 NC
52*P2*EA 1 NO + 1 NC
AMB
52*P2*FA 1 NO + 1 NC
••
•
Chrome
BlackMax
P
B
D
G
L
M
24V Full Voltage 1)
120V Transformer 1) 2)
24V LED Module 3)
120V LED Module 3)
1) For LED, add “B” to the end of assembled number.
2) With 6V lamp.
3) With single LED.
2-Position, Maintained Push-Pull
Illuminated
1 ³⁄₄” Metal Mushroom Head
Less Head 52*P2*Z
52*P2*2
52*P2*3
AMB
52*P2*9
••
•
Chrome
BlackMax
P
B
D
G
H
J
K
L
M
N
24V Full Voltage 1)
120V Transformer 1) 2)
240V Transformer 1) 2)
480V Transformer 1) 2)
600V Transformer 1) 2)
24V LED Module 3)
120V LED Module 3)
240V LED Module 3)
1 ³⁄₄” Plastic Mushroom Head
Less Head 52*P2*Z
52*P2*R
52*P2*S
AMB
52*P2*T
••
•
Chrome
BlackMax
P
B
D
G
L
M
24V Full Voltage 1)
120V Transformer 1) 2)
24V LED Module 3)
120V LED Module 3)
2 ¹⁄₂” Plastic Mushroom Head
Less Head 52*P2*Z
52*P2*D
52*P2*E
AMB
52*P2*F
••
•
Chrome
BlackMax
P
B
D
G
L
M
24V Full Voltage 1)
120V Transformer 1) 2)
24V LED Module 3)
120V LED Module 3)
Contact Blocks For All Operators
52BAK
52BAJ
52BJK
52BAH
52BAE
52BAU
52BAR
1 NO
1 NC
1 NO + 1 NC
1 NO Early Make
1 NC Late Break
1 NC Extra Late Break
1 NO + 1 NC 2)
1) 52BAR
2) Hermetically Sealed, UL Listed for Class 1,
1³⁄₄” Mushroom Head – Metal
For Illuminated Push-Pull
52R*3H2
52R*3H3
52R*3H5
AMB
52R*3H9
CLR
52R*3HA
WHT
52R*3HB
••
••
••
Chrome
BlackMax
B
X
Division 2, .25A Max., 200V AC, 10 Watt
.5A Max., 200V AC, 10 Watt
1³⁄₄” Mushroom Head – Plastic
For Illuminated Push-Pull
52RC3JR
52RC3JS
AMB
52RC3JT
••
•
2¹⁄₂” Plastic Mushroom Head
For Illuminated Push-Pull
52RC3KR
52RC3KS
AMB
52RC3KT
••
•
1) For LED, add “XB” to the end of assembled number.
2) With 6V lamp.
3) With single LED.
19
Illuminated Push-Pull Operators
2 Position Maintained
Cat. No. 52PP2, 52BP2
Installation Instructions
1. Remove push-pull head (turn counter clockwise to loosen).
2. Remove locknut, lock ring, and trim ring.
3. Mount unit in panel as shown. Secure locknut to 15 ft.-lbs.
4. Replace push-pull head. Make sure gasket in in place.
Contact Operation
1. For normally open contacts,use 52BAK contact block
2. For normally closed contacts, use 52BAJ contact block
Notes for BlackMax 4X devices:
• The trim ring is not needed or supplied.
• Only use the index locking ring when using a metal nameplate. Discard
when not using a name plate or when using a plastic nameplate.
• Use locknut wrench, 52MAWB.
IMPORTANT
THESE INSTRUCTIONS DO NOT PURPORT TO COVER ALL DETAILS OR VARIATIONS
IN EQUIPMENT, NOR TO PROVIDE FOR EVERY POSSIBLE CONTINGENCY TO BE MET
IN CONNECTION WITH INSTALLATION, OPERATION OR MAINTENANCE. SHOULD
FURTHER INFORMATION BE DESIRED OR SHOULD PARTICULAR PROBLEMS ARISE
WHICH ARE NOT COVERED SUFFICIENTLY FOR THE PURCHASER’S PURPOSES,
THE MATTER SHOULD BE REFERRED TO THE LOCAL SIEMENS SALES OFFICE.
THE CONTENTS OF THIS INSTRUCTION MANUAL SHALL NOT BECOME PART OF
OR MODIFY ANY PRIOR OR EXISTING AGREEMENT COMMITMENT OR RELATIONSHIP.
THE SALES CONTRACT CONTAINS THE ENTIRE OBLIGATION OF SIEMENS. THE WARRANTY
CONTAINED IN THE CONTRACT BETWEEN THE PARTIES IS THE SOLE WARRANTY OF
SIEMENS. ANY STATEMENTS CONTAINED HEREIN DO NOT CREATE NEW WARRANTIES
OR MODIFY THE EXISTING WARRANTY.
Hazardous voltage.
Can cause death, serious personal injury, or property damage.
To avoid electrical shock, turn off electrical power to controls
before performing installation maintenance.
Typical spacing shown.
Automotive legend requires 2¹⁄₂” spacing.
Some accessories also require additional spacing.
1 3/4" plastic mushroom
head push-pull
illuminated
1 3/4" metal mushroom
head push-pull
illuminated
Ø1.75 (45)
Ø1.75 (45)
1.88
(48)
1.75
(45)
2.25
(57)
1.74
(44)
1.74
(44)
2.25
(57)
2.74
(70)
1.09
(28)
2.74
(70)
1.05
(27)
1.09
(28)
1.05
(27)
Legend Plates
Large
20
Jumbo
Automotive
Wiring Contact Position
Maintained 2 Position
Siemens Push-Pull Operators
Components
Operators Only
Complete Units
3-Position Push-Pull; Momentary
Illuminated
1 ³⁄₄” Metal Mushroom Head
Less Head 52*P3*ZU 1 NO + 1 NCXLB 3)
52*P3*2U 1 NO + 1 NCXLB 3)
52*P3*3U 1 NO + 1 NCXLB 3)
AMB
52*P3*9U
••
•
Chrome
BlackMax
P
B
D 24V Full Voltage 1)
G 120V Transformer 1) 2)
H 240V Transformer 1) 2)
J 480V Transformer 1) 2)
K 600V Transformer 1) 2)
L 24V LED Module 4)
M 120V LED Module 4)
N 240V LED Module 4)
1 ³⁄₄” Plastic Mushroom Head
Less Head 52*P3*ZU 1 NO + 1 NCXLB 3)
52*P3*RU 1 NO + 1 NCXLB 3)
52*P3*SU 1 NO + 1 NCXLB 3)
AMB
52*P3*TU 1 NO + 1 NCXLB 3)
••
•
Chrome
BlackMax
P
B
••
•
P
B
Operator Specific
Accessories
1³⁄₄” Mushroom Head – Metal
For Illuminated Push-Pull
52R*3H2
52R*3H3
52R*3H5
AMB
52R*3H9
CLR
52R*3HA
WHT
52R*3HB
••
••
••
Chrome
BlackMax
B
X
1³⁄₄” Plastic Mushroom Head
For Illuminated Push-Pull
52RC3JR
52RC3JS
AMB
52RC3JT
••
•
D 24V Full Voltage 1)
G 120V Transformer 1) 2)
L 24V LED Module 4)
M 120V LED Module 4)
2 ¹⁄₂” Plastic Mushroom Head
Less Head 52*P3*ZU 1 NO + 1 NCXLB 3)
52*P3*DU 1 NO + 1 NCXLB 3)
52*P3*EU 1 NO + 1 NCXLB 3)
AMB
52*P3*FU 1 NO + 1 NCXLB 3)
Chrome
BlackMax
Contact Blocks
D 24V Full Voltage 1)
G 120V Transformer 1) 2)
L 24V LED Module 4)
M 120V LED Module
2¹⁄₂” Plastic Mushroom Head
For Illuminated Push-Pull
52RC3KR
52RC3KS
AMB
52RC3KT
••
•
1) For LED, add “B” to the end of assembled number.
2) With 6V lamp.
3) Blocks cannot be interchanged (start-stop circuit).
4) With single LED.
21
­
Illuminated Push-Pull Operators
3 Position Momentary
Cat. No. 52PP3, 52BP3
Installation Instructions
1. Remove push-pull head (turn counter clockwise to loosen).
2. Remove locknut, lock ring, and trim ring.
3. Mount unit in panel as shown. Secure locknut to 15 ft.-lbs.
4. Replace push-pull head. Make sure gasket in in place.
Contact Operation
1. For normally open contacts, the 52BAJ (normally closed)
contact block is used. When mounted on this operator, the
contact block becomes normally open.
2. For normally closed contacts, the special 52BAU contact block
is used. This contact block must be mounted last.
Notes for BlackMax 4X devices:
• The trim ring is not needed or supplied.
• Only use the index locking ring when using a metal nameplate. Discard
when not using a name plate or when using a plastic nameplate.
• Use locknut wrench, 52MAWB.
Typical spacing shown.
Automotive legend requires 2¹⁄₂” spacing.
Some accessories also require additional spacing.
IMPORTANT
THESE INSTRUCTIONS DO NOT PURPORT TO COVER ALL DETAILS OR VARIATIONS
IN EQUIPMENT, NOR TO PROVIDE FOR EVERY POSSIBLE CONTINGENCY TO BE MET
IN CONNECTION WITH INSTALLATION, OPERATION OR MAINTENANCE. SHOULD
FURTHER INFORMATION BE DESIRED OR SHOULD PARTICULAR PROBLEMS ARISE
WHICH ARE NOT COVERED SUFFICIENTLY FOR THE PURCHASER’S PURPOSES,
THE MATTER SHOULD BE REFERRED TO THE LOCAL SIEMENS SALES OFFICE.
THE CONTENTS OF THIS INSTRUCTION MANUAL SHALL NOT BECOME PART OF
OR MODIFY ANY PRIOR OR EXISTING AGREEMENT COMMITMENT OR RELATIONSHIP.
THE SALES CONTRACT CONTAINS THE ENTIRE OBLIGATION OF SIEMENS. THE WARRANTY
CONTAINED IN THE CONTRACT BETWEEN THE PARTIES IS THE SOLE WARRANTY OF
SIEMENS. ANY STATEMENTS CONTAINED HEREIN DO NOT CREATE NEW WARRANTIES
OR MODIFY THE EXISTING WARRANTY.
1 3/4" metal
mushroom head
illuminated
1 3/4" plastic
mushroom head
illuminated
Ø1.75 (45)
Ø1.75 (45)
1.88
(48)
1.75
(45)
2.25
(57)
Momentary Contact 3 Position
1.74
(44)
1.74
(44)
2.25
(57)
2.74
(70)
1.09
(28)
2.74
(70)
1.05
(27)
1.09
(28)
1.05
(27)
Hazardous voltage.
Can cause death, serious personal injury, or property damage.
To avoid electrical shock, turn off electrical power to controls
before performing installation maintenance.
Legend Plates
Large
22
Jumbo
Automotive
Siemens Push-Pull Units
Complete Units
3-Position Push-Pull; Push Maintained,
Pull Momentary
Non-Illuminated
1³⁄₄” Metal Mushroom Head
Less head 52*P7AZU 1 NO + 1 NCXLB
MTL
52*P7A2U 1 NO + 1 NCXLB 1)
MTL
52*P7A3U 1 NO + 1 NCXLB 1)
MTL
52*P7ACU 1 NO + 1 NCXLB 1)
••
•
Chrome
BlackMax
P
B
Components
Operators Only
Contact Blocks
Operator Specific
Accessories
1³⁄₄” Mushroom Head – Plastic
For Non-Illuminated Pushbuttons
52RC3D1
52RC3D2
52RC3D3
52RC3D4
52RC3D5
52RC3D6
52RC3D8
Kit all colors 52RC3DN
••
••
••
•
1³⁄₄” Plastic Mushroom Head
Less head 52*P7WZU 1 NO + 1 NCXLB
52*P7W2U 1 NO + 1 NCXLB 1)
52*P7W3U 1 NO + 1 NCXLB 1)
52*P7WCU 1 NO + 1 NCXLB 1)
••
•
Chrome
BlackMax
P
B
2¹⁄₂” Plastic Mushroom Head
Less head 52*P7VZU 1 NO + 1 NCXLB
52*P7V2U 1 NO + 1 NCXLB 1)
52*P7V3U 1 NO + 1 NCXLB 1)
52*P7V3U 1 NO + 1 NCXLB 1)
••
•
Chrome
BlackMax
P
B
1³⁄₄” Mushroom Head – Metal
For Non-Illuminated Pushbuttons
MTL
52RC2FC
MTL
52RC2F2
MTL
52RC2F3
••
•
1) Blocks cannot be interchanged (start-stop circuit).
2¹⁄₂” Mushroom Head – Plastic
For Non-Illuminated Pushbuttons
52RC3E1
52RC3E2
52RC3E3
52RC3E4
52RC3E5
52RC3E6
52RC3E8
Kit all colors 52RC3EN
••
••
••
•
23
Non-Illuminated Push-Pull Units
3 Position Push-Maintained, Pull-Momentary
Cat. No. 52PP7A, 52PP7W, 52PP7V, 52BP7A, 52BP7W, 52BP7V
Installation Instructions
1. Remove push-pull head (turn counter clockwise to loosen).
2. Remove locknut, lock ring, and trim ring.
3. Mount unit in panel as shown. Secure locknut to 15 ft.-lbs.
4. Replace push-pull head. Make sure gasket in in place.
Contact Operation
1. For normally open contacts, the 52BAJ (normally closed)
contact block is used. When mounted on this operator, the
contact block becomes normally open.
2. For normally closed contacts, the special 52BAU contact block
is used. This contact block must be mounted last.
Notes for BlackMax 4X devices:
• The trim ring is not needed or supplied.
• Only use the index locking ring when using a metal nameplate. Discard
when not using a name plate or when using a plastic nameplate.
• Use locknut wrench, 52MAWB.
IMPORTANT
THESE INSTRUCTIONS DO NOT PURPORT TO COVER ALL DETAILS OR VARIATIONS
IN EQUIPMENT, NOR TO PROVIDE FOR EVERY POSSIBLE CONTINGENCY TO BE MET
IN CONNECTION WITH INSTALLATION, OPERATION OR MAINTENANCE. SHOULD
FURTHER INFORMATION BE DESIRED OR SHOULD PARTICULAR PROBLEMS ARISE
WHICH ARE NOT COVERED SUFFICIENTLY FOR THE PURCHASER’S PURPOSES,
THE MATTER SHOULD BE REFERRED TO THE LOCAL SIEMENS SALES OFFICE.
THE CONTENTS OF THIS INSTRUCTION MANUAL SHALL NOT BECOME PART OF
OR MODIFY ANY PRIOR OR EXISTING AGREEMENT COMMITMENT OR RELATIONSHIP.
THE SALES CONTRACT CONTAINS THE ENTIRE OBLIGATION OF SIEMENS. THE WARRANTY
CONTAINED IN THE CONTRACT BETWEEN THE PARTIES IS THE SOLE WARRANTY OF
SIEMENS. ANY STATEMENTS CONTAINED HEREIN DO NOT CREATE NEW WARRANTIES
OR MODIFY THE EXISTING WARRANTY.
Typical spacing shown.
Automotive legend requires 2¹⁄₂” spacing.
Some accessories also require additional spacing.
1 3/4" plastic
mushroom head
illuminated
1.75
(45)
To avoid electrical shock, turn off electrical power to controls
before performing installation maintenance.
24
Legend Plates
Ø2.50 (64)
Ø1.75 (44)
1.75
(45)
Large
1.74
(44)
1.74
(44)
2.74
(70)
2.74
(70)
1.05
(27)
2.10 (53)
Hazardous voltage.
Can cause death, serious personal injury, or property damage.
2 1/2" plastic
mushroom head
illuminated
1.05
(27)
2.10 (53)
Automotive
Jumbo
Siemens Push-Pull Units
Components
Operators Only
Complete Units
3-Position Push-Pull; Push-Maintained,
Pull-Momentary
Illuminated
1 ³⁄₄” Metal Mushroom Head
Less Head 52*P7*NU 1 NO + 1 NCXLB 3)
52*P7*2U 1 NO + 1 NCXLB 3)
52*P7*3U 1 NO + 1 NCXLB 3)
AMB
52*P7*9U 1 NO + 1 NCXLB 3)
••
•
Chrome
BlackMax
P
B
D
G
H
J
K
L
M
N
24V Full Voltage 1)
120V Transformer 1) 2)
240V Transformer 1) 2)
480V Transformer 1) 2)
600V Transformer 1) 2)
24V LED Module 4)
120V LED Module 4)
240V LED Module 4)
1 ³⁄₄” Plastic Mushroom Head
Less Head 52*P7*NU 1 NO + 1 NCXLB 3)
52*P7*RU 1 NO + 1 NCXLB 3)
52*P7*SU 1 NO + 1 NCXLB 3)
AMB
52*P7*TU 1 NO + 1 NCXLB 3)
••
•
Chrome
BlackMax
P
B
D
G
L
M
24V Full Voltage 1)
120V Transformer 1) 2)
24V LED Module 4)
120V LED Module 4)
2 ¹⁄₂” Plastic Mushroom Head
Less Head 52*P7*NU 1 NO + 1 NCXLB 3)
52*P7*DU 1 NO + 1 NCXLB 3)
52*P7*EU 1 NO + 1 NCXLB 3)
AMB
52*P7*FU
••
•
Chrome
BlackMax
1)
2)
3)
4)
P
B
D
G
L
M
24V Full Voltage 1)
120V Transformer 1) 2)
24V LED Module 4)
120V LED Module 4)
Contact Blocks
Operator Specific
Accessories
1³⁄₄” Metal Mushroom Head
For Illuminated Push-Pull
52R*3H2
52R*3H3
52R*3H5
AMB
52R*3H9
CLR
52R*3HA
WHT
52R*3HB
••
••
••
Chrome
BlackMax
P
B
1³⁄₄” Plastic Mushroom Head
For Illuminated Push-Pull
52RC3JR
52RC3JS
AMB
52RC3JT
••
•
2¹⁄₂” Plastic Mushroom Head
For Illuminated Push-Pull
52RC3KR
52RC3KS
AMB
52RC3KT
••
•
For LED, add “B” to the end of assembled number.
With 6V lamp.
Blocks cannot be interchanged (start-stop circuit).
With single LED.
25
Illuminated Push Pull Units
3 Position Push-Maintained, Pull-Momentary
Cat. No. 52PP7, 52BP7
Installation Instructions
1. Remove push-pull head (turn counter clockwise to loosen).
2. Remove locknut, lock ring, and trim ring.
3. Mount unit in panel as shown. Secure locknut to 15 ft.-lbs.
4. Replace push-pull head. Make sure gasket in in place.
Contact Operation
1. For normally open contacts, the 52BAJ (normally closed)
contact block is used. When mounted on this operator, the
contact block becomes normally open.
2. For normally closed contacts, the special 52BAU contact block
is used. This contact block must be mounted last.
Notes for BlackMax 4X devices:
• The trim ring is not needed or supplied.
• Only use the index locking ring when using a metal nameplate. Discard
when not using a name plate or when using a plastic nameplate.
• Use locknut wrench, 52MAWB.
Typical spacing shown.
Automotive legend requires 2¹⁄₂” spacing.
Some accessories also require additional spacing.
1 3/4" plastic mushroom
head illuminated
1 3/4" metal mushroom
head illuminated
Ø1.75 (45)
IMPORTANT
THESE INSTRUCTIONS DO NOT PURPORT TO COVER ALL DETAILS OR VARIATIONS
IN EQUIPMENT, NOR TO PROVIDE FOR EVERY POSSIBLE CONTINGENCY TO BE MET
IN CONNECTION WITH INSTALLATION, OPERATION OR MAINTENANCE. SHOULD
FURTHER INFORMATION BE DESIRED OR SHOULD PARTICULAR PROBLEMS ARISE
WHICH ARE NOT COVERED SUFFICIENTLY FOR THE PURCHASER’S PURPOSES,
THE MATTER SHOULD BE REFERRED TO THE LOCAL SIEMENS SALES OFFICE.
1.74
(44)
1.74
(44)
2.25
(57)
2.74
(70)
1.09
(28)
26
1.88
(48)
Large
THE CONTENTS OF THIS INSTRUCTION MANUAL SHALL NOT BECOME PART OF
OR MODIFY ANY PRIOR OR EXISTING AGREEMENT COMMITMENT OR RELATIONSHIP.
THE SALES CONTRACT CONTAINS THE ENTIRE OBLIGATION OF SIEMENS. THE WARRANTY
CONTAINED IN THE CONTRACT BETWEEN THE PARTIES IS THE SOLE WARRANTY OF
SIEMENS. ANY STATEMENTS CONTAINED HEREIN DO NOT CREATE NEW WARRANTIES
OR MODIFY THE EXISTING WARRANTY.
To avoid electrical shock, turn off electrical power to controls
before performing installation maintenance.
Ø1.75 (45)
1.75
(45)
2.25
(57)
Hazardous voltage.
Can cause death, serious personal injury, or property damage.
Legend Plates
1.05
(27)
2.74
(70)
1.09
(28)
Momentary Contact 3 Position Non-Illuminated
1.05
(27)
Automotive
Jumbo
General Accessories
Lamps
Incandescent
52AABN
52AABNF
52AACN
52AADN
52AAENC1
52AAPN
Lamps
LED
6V, Type 755
6V, Flashing, Type 267
12V, Type 756
24V, Type 757
120V, Type 120MB
120V, Neon
Legend Plates for Class 51 and
Class 52 30mm Pilot Devices
Blank
52N*02
52N*02R
Blank (red)
52N*02B
Blank (black)
52N*18
Close
52N*10
Down
52N*16
Emerg Stop
52N*16R
Emerg Stop (red)
52N*33
Fast-Slow
52N*05
Forward
52N*38
For-Off-Rev
52N*31
For-Rev
52N*37
Hand-Off-Auto
52N*07
High
52N*30
High-Low
52N*44
High-Off-Low
52N*21
In
52N*13
Jog
52N*24
Jog-Forward
52N*25
Jog-Reverse
52N*08
Low
52N*20
Lower
52N*35
Man-Auto
52N*12
Off
52N*26
Off-On
52N*11
On
52N*40
On-Off-Auto
52N*17
Open
52N*34
Open-Close
52N*41
Open-Off-Close
52N*22
Pull to Start Out
52N*47
Push to Stop/Pull to Start
52N*19
Raise
52N*36
Raise-Lower
52N*14
Reset
52N*06
Reverse
52N*23
Run
52N*29
Run-Jog
52N*27
Safe-Run
52N*39
Slow-Off-Fast
52N*03
Start
52N*28
Start-Jog
52N*32
Start-Stop
52N*04
Stop
52N*04R
Stop (red)
52N*09
Up
52N*49
Up-Down
52N*42
Up-Off-Down
L Large Metal (1 ⁷⁄₁₆” x 2”)
A Automotive (2 ⁷⁄₁₆” x 2 ⁷⁄₁₆”)
WH
••
••
•
Protective Boot
(52AABA)
Lamps
LED Cluster
••
•
52A *2
52A *3
52A *4
52A*5
52A*B
B 6V UC
D 24V UC
E 120V AC
Pushbutton Guard
(52AAGP)
Padlock Attachment
(52AALA)
Lens Guard
(52AAGM)
Padlock Attachment
(52AALS)
Enclosures
# of Holes
P30EMS ***
52A *27
52A *37
52A *47
0
0
0
0
0
0
1
1
B 6V UC
D 24V UC
E 120V AC
Locknut (Pushbutton
Replacement Front
Ring 52AANP)
Padlock Attachment
(52AALE)
1 _ NEMA 12/13
2 D NEMA 12/13 Extra Deep
3 4 NEMA 4/4X Stainless Steel
4 X NEMA 4/4X Fiberglass
6
9
2
6
Locknut (Mushroom Head
and Pilot Light Replacement
Front Ring 52AANL)
Hole Plugs
(52AAH6)
Lock Wrench
(52MAWB)
Locknut (Selector Switch
Replacement Front Ring
52AANS)
Grounding Kit
(52AL109145)
Protective Boot (offers protection from ice and foreign substances from interfering with button operation)
52AABA
Clear protective boot offering protection from ice and foreign substances from interfering with button operation
52AAB1
Black protective boot
Pushbutton Guard (Prevents accidental operation of pushbuttons)
52AAGP
Non-Illuminated pushbuttons; Command/52
52AXGP
Non-Illuminated pushbuttons; Black Max
Lens Guard
52AAGL
Illuminated pushbuttons and push to test and pilot lights; Command/52
52AXGL
Illuminated pushbuttons and push to test and pilot lights; BlackMax
Mushroom Head Pushbutton Guard
52AAGM
1 5/8” (41.3mm) mushroom head pushbutton and push-pull operator guard; Command/52
52AXGM
1 5/8” (41.3mm) mushroom head pushbutton and push-pull operator guard; BlackMax
Locknut (Replacement Front Ring)
52AANP
Non-illuminated pushbutton; Command/52
52AAXP
Non-illuminated pushbutton; BlackMax
52AANL
Momentary PB mushroom head and pilot light; Command/52
52AXNL
Momentary PB mushroom head and pilot light; Black Max
52AANS
Selector switch; Command/52
52AXNS
Selector switch; BlackMax
52CANP
Push-pull units, twist to release units and push to test illuminated PB; Command/52
52CXNP
Push-pull units, twist to release units and push to test illuminated PB; BlackMax
Padlock Attachments
52AALA
Flush Pushbutton operators
52AALB
Extended Pushbutton operators
52AALS
Pushbuttons, selector switches, and non-illuminated mushroom head operators
52AALE
Illuminated push-pull operators
Hole Plugs
52AAH6
Corrosion resistant
52ABH6
Steel, gray
52ABHS
Stainless steel
Wrench and Grounding Kit
52MAWB
Locknut wrench (all devices)
52AL109145 Grounding kit (all devices)
27
Selector Switch and Selector Pushbutton Configurations 1)
1. Determine which table to use based upon the type of
selector (non-illuminated selector switch-top, illuminated
selector switch-middle, and selector pushbutton-bottom).
2. Find the correct number of selector positions (2, 3 or
4 positions).
3. Select the contact operation required for each selector
position. X indicates the contacts are closed, while O
indicates the contacts are open. (For the selector pushbutton,
N=normal and D=depressed).
4. Determine the CAM letter required for the chosen contact
operation (only 1 CAM can be used per selector switch or
selector pushbutton).
5. Contact blocks must be assembled in the position shown
for each circuit application. The mounting position is
viewed from the front of the device.
1) Number of Contact Block Limitations
- CAM C and CAM G are limited to four contact blocks.
- Selector operators in enclosures are limited to a depth of 1 contact block
(2 blocks wide).
Contact Block Mounting
Example: Non-Illuminated Selector Switch
Right Side
This Side Up
Selector
Lever Front
Left Side
Max four contact blocks
28
Insert
Non-Illuminated and Keyed Selector Switches
Viewed from Front
2 Selector Positions
Left
Right
X
O
O
X
3 Selector Positions
Left
Center
Right
X
O
X
O
X
X
O
O
O
X
O
X
O
O
O
X
O
X
X
O
X
O
X
O
O
O
O
X
O
O
X
X
O
O
O
X
O
O
X
O
X
O
Left
4 Selector Positions
Left
Right
Center
Center
Right
X
O
O
O
O
X
O
O
O
O
O
X
O
O
X
O
Contact Block
CAM
Mounting
Left
NC (52BAJ)
NO (52BAK)
A
A
•
•
Contact Block
CAM
Mounting
Left
Right
NO (52BAK)
NO (52BAK)
NC (52BAJ)
NC (52BAJ)
2-NO (2-52BAK)
NC (52BAJ)
NO (52BAK)
NC (52BAJ)
NO (52BAK)
NO (52BAK)
NC (52BAJ)
NC (52BAJ)
NC (52BAJ)
NO (52BAK)
B
B
B
B
B
C
C
D
D
E
E
G
G
G
–
•
•
•–
–
–
Contact Block (s)
CAM
NO (52BAK)
NC (52BAJ)
NC (52BAJ)
NO (52BAK)
H
H
H
H
•
•
•
•
•
•
•
•
Right
•
•
or
or
and
or
or
or
or
or
or
•
•
•
•
•
•
•
•
or
•
•
–
–
•
Mounting
Left
•
•
Right
–
–
–
•
•
–
Selector Switch and Selector Pushbutton Configurations 1) continued
Configuration Examples
Example 1: 3-Pos Maintained Selector Switch
Required Contact Operation: Hand-Off-Auto
Left
Center
Right
X
O
O
O
O
X
CAM Selection: C
Contact Block(s) and Position: 1NO-1NC (mounted either
left or right) Resulting Catalog Number: 52SA2CABA0
(assumed chrome, white short lever, and mounted on left)
Example 2: 3-Pos Illuminated Selector Switch
Required Contact Operation:
Left
Center
Right
O
X
O
O
O
X
CAM Selection: B
Contact Block(s) & Position: 2NO (mounted on right)
Resulting Catalog Number: 52SA7BG5K4 (assumed
chrome, 120V transformer, and blue)
Illuminated and Keyed Selector Switches
Viewed from Front
2 Selector Positions
Left
Right
Contact Block
CAM
X
O
NC (52BAJ)
NO (52BAK)
A
A
3 Selector Positions
Left
Center
Right
Contact Block
CAM
Mounting
Left
Right
O
O
X
O
NC (52BAJ)
NO (52BAK)
NC (52BAJ)
NO (52BAK)
B
B
C
C
–
–
•
•
•
•
–
–
2 Selector Positions
Left
Right
N
D
N
D
Contact Block
CAM
X
O
O
O
X
X
O
O
O
X
O
X
O
O
O
X
X
O
O
O
O
X
X
X
X
X
X
O
X
O
X
X
O
X
O
O
O
O
O
X
3 Selector Positions
Left
Center
N
D
N
D
NC (52BAJ)
NC (52BAJ)
NO (52BAK)
NO (52BAK)
NC (52BAJ)
NO (52BAK)
NC (52BAJ)
NC (52BAJ)
NO (52BAK)
NO (52BAK)
Contact Block
Right
N
D
X
X
O
O
O
O
O
O
O
X
O
X
O
O
X
O
O
X
Mounting
Left
Right
•
•
–
–
Selector Pushbuttons
Viewed from Front
X
O
X
O
O
X
O
O
O
X
O
X
Mounting
Left
Right
•
O
O
X
X
Q
Q
Q
Q
P
P
R
R
R
R
CAM
•–
•–
•–
•
•
•
–
–
or
or
•–
•
•–
•
•
–
Mounting
Left
Right
•
NC (52BAJ)
NC (52BAJ)
NO (52BAK)
NO (52BAK)
S
S
S
S
–
–
•–
•
•
–
29
Siemens Industry, Inc.
Industry Automation Division
3333 Old Milton Parkway
Alpharetta, GA 30005
1-800-964-4114
[email protected]
www.usa.siemens.com/power
Subject to change without prior notice.
Order No: PWCM-INSRT-1209
All rights reserved.
Printed in USA
© 2009 Siemens Industry, Inc.
The information provided in this brochure contains merely
general descriptions or characteristics of performance
which in case of actual use do not always apply as described
or which may change as a result of further development
of the products. An obligation to provide the respective
characteristics shall only exist if expressly agreed in the
terms of contract.
All product designations may be trademarks or product
names of Siemens AG or supplier companies whose use by
third parties for their own purposes could violate the rights
of the owners.