1600UT System™1 - Architectural Detail Manual

MAY, 2016
1600UT SystemTM1 Curtain Wall
FEATURES
Features
• 1600UT SystemTM1 is a high thermal performance, outside glazed, captured curtain
wall system
• Innovative design delivers high thermal performance while leveraging 1600 Wall
System architecture
• Multiple thermal performance levels resulting from a combination of:
- 1" (25.4), 1-1/4" (31.8), 1-5/16" (33.34) double or 1-3/4" (44.5), triple glazed insulating glass units
- Aluminum or fiberglass pressure plates
• Thermal barrier design ensures high thermal performance without being susceptible to
thermal fatigue
• Offers integrated entrance framing systems
• Corners and splays available
• Comprehensively tested to latest high performance air, water, structural and
thermal standards
• Glass chairs support insulating glass units enabling larger expanses of glass
• Pressure equalized system tested with vapor barrier
• Two color option
• PermanodicTM anodized finishes in seven choices
• Painted finishes in standard and custom choices
Optional Features
• Steel reinforcing
• Rain screen and backpans
• Deep profile covers and bull nose covers
• Deep and heavy-weight mullions
• Integrates with standard Kawneer windows and GLASSventTM Windows for curtain wall
• Profit$MakerTM plus die sets available
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
EC 97911-095
1
Product Applications
• Ideal for low to mid-rise applications where high thermal performance is desired
• High span applications
For specific product applications,
Consult your Kawneer representative.
kawneer.com
ADMD080EN
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1600UT SystemTM1 Curtain Wall
BLANK PAGE
ADMD080EN
kawneer.com
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
2
EC 97911-095
MAY, 2016
MAY, 2016
1600UT SystemTM1 Curtain Wall
EC 97911-095
3
INDEX
Architects - Most extrusion and window types illustrated in this catalog are standard products for Kawneer. These concepts have been expanded
and modified to afford you design freedom. Some miscellaneous details are non-standard and are intended to demonstrate how the system can be
modified to expand design flexibility. Please contact your Kawneer representative for further assistance.
LAWS AND BUILDING AND SAFETY CODES GOVERNING THE DESIGN AND USE OF GLAZED ENTRANCE,
WINDOW, AND CURTAIN WALL PRODUCTS VARY WIDELY. KAWNEER DOES NOT CONTROL THE
SELECTION OF PRODUCT CONFIGURATIONS, OPERATING HARDWARE, OR GLAZING MATERIALS,
AND ASSUMES NO RESPONSIBILITY THEREFOR.
Metric (SI) conversion figures are included throughout these details for reference. Numbers in parentheses
(
) are millimeters unless otherwise noted.
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
PICTORIAL VIEW.................................................................................4
1" INFILL DETAILS...............................................................................5
ENTRANCE DETAILS................................................................. 6-8
CORNERS.......................................................................................9
SPLAYED MULLION OPTIONS....................................................10
WINDOWS.....................................................................................11
1-3/4" INFILL DETAILS......................................................................12
ENTRANCE DETAILS............................................................. 13-15
CORNERS.....................................................................................16
WINDOWS.....................................................................................17
BACKPAN DETAILS.....................................................................18, 19
MISCELLANEOUS FRAMING......................................................20, 21
ANCHORING................................................................................22, 23
WIND LOAD CHARTS.................................................................. 24-32
DEADLOAD CHARTS.................................................................. 33-38
THERMAL CHARTS .................................................................... 39-53
The following metric (SI ) units are found in these details:
m –meter
cm – centimeter
mm –millimeter
s –second
Pa –pascal
MPa –megapascal
Kawneer reserves the right to change configurations without prior notice when deemed necessary for product
improvement.
kawneer.com
ADMD080EN
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1600UT SystemTM1 Curtain Wall
PICTORIAL VIEW
ADMD080EN
kawneer.com
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
4
EC 97911-095
MAY, 2016
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
6
6B
5
2-1/2"
(63.5)
kawneer.com
2-1/2"
(63.5)
6A
7
7-1/2" (190.5)
6" (152.4)
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
MAY, 2016
1600UT SystemTM1 Curtain Wall
EC 97911-095
1" INFILL DETAILS
SCALE 3" = 1'-0"
1
1A
1
2
2A
3
7A
1A
4
7
7B
OPTIONAL
FIBERGLASS
PRESSURE PLATE
6
6A
6B
1/4" INFILL
ADAPTER
OPEN BACK JAMB
7A
1/4" INFILL
ADAPTER
7B
STEEL
REINFORCING
AS REQUIRED
ADMD080EN
TUBE
HORIZONTAL
2
ELEVATION IS NUMBER KEYED TO DETAILS
6" (152.4)
7-1/2" (190.5)
OPEN BACK
HORIZONTAL
2A
3
4
5
5
1600UT SystemTM1 Curtain Wall
6
MAY, 2016
EC 97911-095
NON-THERMAL ENTRANCE DETAILS (1" INFILL)
SCALE 3" = 1'-0"
3
4
6
1
1-3/4"
(50.8)
2
1/8"
(3.2)
2-1/2"
(63.5)
5
TRANSOM BAR
B/H OR O/P
C/H
BUTT HUNG OR OFFSET PIVOT
WITH SURFACE CLOSER
OR FLOOR CLOSER
B/H OR O/P
1/8"
(3.2)
2-1/2"
(63.5)
ELEVATION IS NUMBER KEYED TO DETAILS
2
1-3/4"
(50.8)
DOOR JAMB
BUTT HUNG OR
OFFSET PIVOT
1A
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1
1A
TRANSOM BAR
1/8"
(3.2)
CENTER HUNG
1-3/4"
(50.8)
4
3
TRANSOM BAR
CENTER HUNG WITH
CONCEALED OVERHEAD
OR FLOOR CLOSER
6
DOOR JAMB
2-1/2"
(63.5)
3/4"
(19.1)
TYP.
5
BUTT HUNG OR
OFFSET PIVOT
TRANSOM BAR
BUTT HUNG OR OFFSET PIVOT
WITH LCN CONCEALED
OVER HEAD CLOSER
OR SURFACE CLOSER
ADMD080EN
kawneer.com
© Kawneer Company, Inc., 2013
DOOR JAMB
2-1/2"
(63.5)
3/4"
(19.1)
TYP.
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
BUTT HUNG OR OFFSET PIVOT
WITH SINGLE ACTING
OFFSET ARM CLOSER
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
2
kawneer.com
1"
(25.4)
2-1/2"
(63.5)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
MAY, 2016
1600UT SystemTM1 Curtain Wall
EC 97911-095
AATM250/425 THERMAL ENTRANCE DETAILS (1" INFILL)
SCALE 3" = 1'-0"
1
1A
2
2A
ELEVATION IS NUMBER KEYED TO DETAILS
B/H OR O/P
2-1/2"
(63.5)
1"
(25.4)
DOOR JAMB
BUTT HUNG OR
OFFSET PIVOT
DOOR JAMB
BUTT HUNG OR
OFFSET PIVOT
ADMD080EN
1
TRANSOM BAR
BUTT HUNG OR
OFFSET PIVOT WITH
SURFACE CLOSER
OR FLOOR CLOSER
1A
2A
TRANSOM BAR
BUTT HUNG OR
OFFSET PIVOT WITH
SURFACE CLOSER
OR FLOOR CLOSER
7
SCALE 3" = 1'-0"
ELEVATION IS NUMBER KEYED TO DETAILS
B/H OR O/P
2-1/2"
(63.5)
1"
(25.4)
DOOR JAMB
BUTT HUNG OR
OFFSET PIVOT
BUTT HUNG OR
OFFSET PIVOT
DOOR JAMB
ADMD080EN
1
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
INSULCLADTM THERMAL ENTRANCE DETAILS (1" INFILL)
BUTT HUNG OR
OFFSET PIVOT WITH
SURFACE CLOSER
OR FLOOR CLOSER
1A
2A
TRANSOM BAR
BUTT HUNG OR
OFFSET PIVOT WITH
SURFACE CLOSER
OR FLOOR CLOSER
kawneer.com
© Kawneer Company, Inc., 2013
2-1/2"
(63.5)
1600UT SystemTM1 Curtain Wall
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
2
1"
(25.4)
8
EC 97911-095
MAY, 2016
1
1A
2
2A
TRANSOM BAR
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
MAY, 2016
kawneer.com
1600UT SystemTM1 Curtain Wall
EC 97911-095
CORNERS (1" INFILL)
SCALE 3" = 1'-0"
90° OUTSIDE CORNER
90° INSIDE CORNER
90° OUTSIDE CORNER
135° OUTSIDE CORNER
0° TO 5°
0° TO 5°
OUTSIDE SPLAYED MULLIONS
INSIDE SPLAYED MULLIONS
OTHER SPLAY OPTIONS AVAILABLE
ADMD080EN
9
0° TO 5°
0° TO 5°
5° TO 15°
5° TO 15°
ADMD080EN
15° TO 25°
OUTSIDE SPLAYED MULLIONS
15° TO 25°
INSIDE SPLAYED MULLIONS
kawneer.com
© Kawneer Company, Inc., 2013
SPLAYED MULLION OPTIONS
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1600UT SystemTM1 Curtain Wall
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
10
EC 97911-095
MAY, 2016
SCALE 3" = 1'-0"
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
MAY, 2016
SCALE 3" = 1'-0"
kawneer.com
1600UT SystemTM1 Curtain Wall
EC 97911-095
WINDOWS
GLASSventTM UT Windows
HEAD
SILL
JAMB
AA™900 Thermal Windows
HEAD
SILL
JAMB
NOTE: AA™6400 vent can be accommodated.
Contact your Kawneer representative for other options.
ADMD080EN
11
1
2
2A
3
2-1/2"
(63.5)
7A
1A
4
7
7B
5
OPTIONAL
FIBERGLASS
PRESSURE PLATE
ELEVATION IS NUMBER KEYED TO DETAILS
6
7
6A
6B
1" INFILL
ADAPTER
OPEN BACK JAMB
7A
7B
1" INFILL
ADAPTER
ADMD080EN
TUBE
HORIZONTAL
2
2A
3
4
5
STEEL
REINFORCING
AS REQUIRED
kawneer.com
© Kawneer Company, Inc., 2013
1-3/4" INFILL DETAILS
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1600UT SystemTM1 Curtain Wall
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
6
6B
2-1/2"
(63.5)
6A
8-1/4" (209.5)
6-3/4" (171.4)
12
EC 97911-095
MAY, 2016
SCALE 3" = 1'-0"
1
1A
6-3/4" (171.4)
8-1/4" (209.5)
OPEN BACK
HORIZONTAL
1600UT SystemTM1 Curtain Wall
MAY, 2016
EC 97911-095
13
NON-THERMAL ENTRANCE DETAILS (1-3/4" INFILL)
SCALE 3" = 1'-0"
1
1A
3
6
1
1-3/4"
(50.8)
4
TRANSOM BAR
B/H OR O/P
C/H
BUTT HUNG OR OFFSET PIVOT
WITH SURFACE CLOSER
OR FLOOR CLOSER
B/H OR O/P
DOOR JAMB
2
1A
1/8"
(3.2)
2-1/2"
(63.5)
ELEVATION IS NUMBER KEYED TO DETAILS
BUTT HUNG OR
OFFSET PIVOT
1-3/4"
(50.8)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
2
1/8"
(3.2)
2-1/2"
(63.5)
5
TRANSOM BAR
BUTT HUNG OR OFFSET PIVOT
WITH SINGLE ACTING
OFFSET ARM CLOSER
2-1/2"
(63.5)
1/8"
(3.2)
DOOR JAMB
CENTER HUNG
3
1-3/4"
(50.8)
4
TRANSOM BAR
CENTER HUNG WITH
CONCEALED OVERHEAD
OR FLOOR CLOSER
3/4"
(19.1)
TYP.
2-1/2"
(63.5)
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
3/4"
(19.1)
TYP.
6
5
DOOR JAMB
BUTT HUNG OR
OFFSET PIVOT
TRANSOM BAR
BUTT HUNG OR OFFSET PIVOT
WITH LCN CONCEALED
OVER HEAD CLOSER
OR SURFACE CLOSER
kawneer.com
ADMD080EN
SCALE 3" = 1'-0"
ELEVATION IS NUMBER KEYED TO DETAILS
B/H OR O/P
2-1/2"
(63.5)
BUTT HUNG OR
OFFSET PIVOT
DOOR JAMB
ADMD080EN
1
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
AATM250/425 THERMAL ENTRANCE DETAILS (1-3/4" INFILL)
TRANSOM BAR
BUTT HUNG OR
OFFSET PIVOT WITH
SURFACE CLOSER
OR FLOOR CLOSER
kawneer.com
© Kawneer Company, Inc., 2013
2
2-1/2"
(63.5)
1600UT SystemTM1 Curtain Wall
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
1"
(25.4)
14
EC 97911-095
MAY, 2016
1
2
1"
(25.4)
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
1"
(25.4)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
2
kawneer.com
2-1/2"
(63.5)
MAY, 2016
1600UT SystemTM1 Curtain Wall
EC 97911-095
INSULCLADTM THERMAL ENTRANCE DETAILS (1-3/4"" INFILL)
SCALE 3" = 1'-0"
2-1/2"
(63.5)
1
2
ELEVATION IS NUMBER KEYED TO DETAILS
B/H OR O/P
BUTT HUNG OR
OFFSET PIVOT
DOOR JAMB
ADMD080EN
1
1"
(25.4)
TRANSOM BAR
BUTT HUNG OR
OFFSET PIVOT WITH
SURFACE CLOSER
OR FLOOR CLOSER
15
90° OUTSIDE CORNER
90° INSIDE CORNER
90° OUTSIDE CORNER
135° OUTSIDE CORNER
0° TO 5°
0° TO 5°
OUTSIDE SPLAYED MULLIONS
INSIDE SPLAYED MULLIONS
OTHER SPLAY OPTIONS AVAILABLE
ADMD080EN
kawneer.com
© Kawneer Company, Inc., 2013
CORNERS (1-3/4" INFILL)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1600UT SystemTM1 Curtain Wall
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
16
EC 97911-095
MAY, 2016
SCALE 3" = 1'-0"
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
MAY, 2016
SCALE 3" = 1'-0"
kawneer.com
1600UT SystemTM1 Curtain Wall
EC 97911-095
WINDOWS
GLASSventTM UT Windows
HEAD
SILL
JAMB
AA™900 Thermal Windows
HEAD
SILL
JAMB
NOTE: AA™6400 vent can be accommodated.
Contact your Kawneer representative for other options.
ADMD080EN
17
1
2
JAMB MULLION
AT SPANDREL
(With vapor barrier tie-in)
MULLION AT SPANDREL
3/8" (9.5)
2-1/2" (63.5)
D.L.O.
4
3
HEAD TRANSOM AT PARAPET FLASHING
4
ELEVATION IS NUMBER KEYED TO DETAILS
ADMD080EN
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
3/8" (9.5)
BACKPAN DETAILS (1" INFILL)
5
TYPICAL DEADLOAD ANCHOR
6
TRANSOM – SPANDREL OVER VISION
kawneer.com
© Kawneer Company, Inc., 2013
NOTE: 6" SYSTEM SHOWN, 7-1/2" SYSTEM SIMILAR
MULLION LENGTH
1600UT SystemTM1 Curtain Wall
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
6
1/2" (12.7)
5
D.L.O.
2
MULLION LENGTH
1
CONSTRUCTION JOINT
1/2" (12.7) MAX (ALLOWS +/-1/4" MOVEMENT)
18
EC 97911-095
MAY, 2016
SCALE 3" = 1'-0"
3
EXPANSION JOINT
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
MAY, 2016
1
kawneer.com
1600UT SystemTM1 Curtain Wall
EC 97911-095
BACKPAN DETAILS (1-3/4" INFILL)
SCALE 3" = 1'-0"
3
3
4
HEAD TRANSOM AT PARAPET FLASHING
2
5
6
1
JAMB MULLION
AT SPANDREL
(With vapor barrier tie-in)
4
ELEVATION IS NUMBER KEYED TO DETAILS
NOTE: 6" SYSTEM SHOWN, 7-1/2" SYSTEM SIMILAR
EXPANSION JOINT
2
5
MULLION AT SPANDREL
TYPICAL DEADLOAD ANCHOR
6
TRANSOM – SPANDREL OVER VISION
ADMD080EN
19
1600UT SystemTM1 Curtain Wall
20
MAY, 2016
MISCELLANEOUS FRAMING
EC 97911-095
SCALE 3" = 1'-0"
Architects – Most extrusion and window types illustrated in this catalog are standard products for Kawneer. These concepts have been expanded and
modified to afford you design freedom. Some miscellaneous details are non-standard and are intended to demonstrate how the system can be modified
to expand design flexibility. Please contact your Kawneer representative for further assistance.
3"
(76.2)
2-1/2"
(63.5)
1-1/4"
(31.8)
4-3/4"
(120.7)
2-3/4"
(69.7)
2-1/2"
(63.5)
2-1/2"
(63.5)
OPTIONAL
BULL NOSE COVERS
2-1/2"
(63.5)
2-1/2"
(63.5)
3-1/4"
(82.6)
VARIES
2-1/2"
(63.5)
DOUBLE MULLION
VENEER SYSTEM
069263
GYPSUM BOARD TRIM
THERMAL
PERIMETER
PRESSURE PLATE
STOOL TRIM OPTIONS:
069264 - 2-3/4" (69.9)
069265 - 4-1/2" (114.3)
069266 - 5" (127.0)
069267 - 6-1/8" (155.6)
069268 - 6-3/4" (171.4)
NOTE:
STOOL TRIMS REQUIRE 069271 TRIM CLIP PACKAGE
INTERIOR STOOL TRIM
ADMD080EN
kawneer.com
© Kawneer Company, Inc., 2013
OPTIONAL
DEEP COVERS
NOTE: 1-3/4" triple glazing similar.
2-1/2"
(63.5)
DEEP MULLION
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
2"
(50.8)
1-3/16"
(30.1)
10-1/2"
(266.7)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
162-064
© Kawneer Company, Inc., 2013
kawneer.com
2-1/2"
(63.5)
7-3/4" (305.6)
6-1/4" (158.8)
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
2-1/2"
(63.5)
7-3/4" (305.6)
6-1/4" (158.8)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
MAY, 2016
1600UT SystemTM1 Curtain Wall
EC 97911-095
MISCELLANEOUS FRAMING
1-1/4" INFILL DETAILS
7-3/4" (305.6)
6-1/4" (158.8)
2-1/2"
(63.5)
1-5/16" INFILL DETAILS
6-1/4" (158.8)
7-3/4" (305.6)
2-1/2"
(63.5)
ADMD080EN
21
1" (25.4)
ANCHORING TO FLOOR SLAB
1" (25.4)
ANCHORING TO SUPPORT STEEL
NOTE: 1-3/4" triple glazing similar.
ADMD080EN
kawneer.com
© Kawneer Company, Inc., 2013
ANCHORING
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1600UT SystemTM1 Curtain Wall
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
22
EC 97911-095
MAY, 2016
Actual project conditions will determine specific anchor design. Details on this page are for reference only.
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
MAY, 2016
kawneer.com
1600UT SystemTM1 Curtain Wall
EC 97911-095
ANCHORING
Actual project conditions will determine specific anchor design. Details on this page are for reference only.
1" (25.4)
ANCHORING TO HORIZONTAL
STRUCTURAL STEEL
NOTE: 1-3/4" triple glazing similar.
1" (25.4)
ANCHORING TO VERTICAL
STRUCTURAL STEEL
ADMD080EN
23
24
1600UT SystemTM1 Curtain Wall
WIND LOAD / DEADLOAD CHARTS
MAY, 2016
EC 97911-095
DEADLOAD CHARTS
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Horizontal or deadload limitations are based upon 1/8" (3.2), maximum allowable deflection at the center of an
intermediate horizontal member. The accompanying charts are calculated for 1" (25.4) thick insulating glass or 1-3/4"
(44.5) thick glass supported on two setting blocks placed at the loading points shown.
ADMD080EN
kawneer.com
© Kawneer Company, Inc., 2013
Mullions are designed for deflection limitations in accordance with AAMA TIR-A11 of L/175 up to 13'-6" and L/240 +1/4"
above 13'-6". These curves are for mullions WITH HORIZONTALS and are based on engineering calculations for stress
and deflection. Allowable wind load stress for ALUMINUM 15,152 psi (104MPa), STEEL 30,000 psi (207MPa). Charted
curves, in all cases are for the limiting value. Wind load charts contained herein are based upon nominal wind load
utilized in allowable stress design. A conversion from Load Resistance Factor Design (LRFD) is provided. To convert
ultimate wind loads to nominal loads, multiply ultimate wind loads by a factor of 0.6 per ASCE/SEI 7. A 4/3 increase in
allowable stress has not been used to develop these curves. For special situations not covered by these curves, contact
your Kawneer representative for additional information.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
WIND LOAD CHARTS
1600UT SystemTM1 Curtain Wall
MAY, 2016
EC 97911-095
WIND LOAD CHARTS (1" INFILL)
SINGLE SPAN
METERS
1
1.5
A=
B=
C=
D=
E=
2
7
23
6.5
21
20
TWIN SPAN
LRFD Ultimate
Design Load
33 PSF (1580)
50 PSF (2400)
67 PSF (3200)
83 PSF (4000)
100 PSF (4800)
METERS
.5
28
8.5
27
A
26
5.5
A
10
E
7
2.5
171213
2
3
4
5
B
21
6
7
6.5
20
6
19
C
18
5.5
D
5
E
4.5
14
2
1
22
15
6
0
7
23
16
C
D
8
7.5
24
17
3
B
9
MULLION HEIGHT IN FEET
3.5
11
MULLION HEIGHT
EQUAL
EQUAL
12
6" (152.4)
4
13
MULLION HEIGHT
4.5
14
METERS
5
15
8
25
17
16
2
9
6
18
MULLION HEIGHT IN FEET
1.5
29
19
5
1
30
8
4
13
I = 3.662(152.42 x 104)
S = 1.662(27.24 x 103)
12
0
1
2
3
4
5
6
7
MULLION CENTERS IN FEET
MULLION CENTERS IN FEET
SINGLE SPAN
TWIN SPAN
METERS
.5
1
8
METERS
1.5
.5
2
7
23
1
1.5
2
30
9
22
29
6.5
20
28
6
5.5
12
A
11
3.5
B
10
3
C
9
D
2.5
3
4
5
6
7
MULLION CENTERS IN FEET
kawneer.com
6.5
21
20
6
D
19
E
18
5.5
5
8
4.5
14
171214
6
2
C
22
15
2
1
7
23
17
E
0
7.5
24
16
8
7
MULLION HEIGHT IN FEET
4
13
MULLION HEIGHT
EQUAL
EQUAL
4.5
14
6" (152.4)
15
METERS
5
16
8
B
25
17
MULLION HEIGHT
18
MULLION HEIGHT IN FEET
A
26
19
5
8.5
27
I = 4.5071(87.60 x 104)
S = 1.968(32.25 x 103)
ADMD080EN
4
13
12
0
1
2
3
4
5
6
7
MULLION CENTERS IN FEET
8
METERS
21
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
22
Allowable Stress
Design Load
20 PSF (960)
30 PSF (1440)
40 PSF (1920)
50 PSF (2400)
60 PSF (2880)
METERS
.5
25
1600UT SystemTM1 Curtain Wall
MAY, 2016
WIND LOAD CHARTS (1" INFILL)
1
1.5
A=
B=
C=
D=
E=
2
7
23
22
6.5
21
20
METERS
.5
2
9
A
28
8.5
27
6
8
26
5.5
13
4
B
12
C
11
3.5
D
10
MULLION HEIGHT IN FEET
4.5
A
14
7-1/2" (190.5)
15
METERS
5
16
MULLION HEIGHT
EQUAL
EQUAL
25
17
MULLION HEIGHT
18
MULLION HEIGHT IN FEET
1.5
29
19
8
7
171215
3
22
C
21
6.5
20
6
19
D
18
5.5
E
5
4
5
6
7
4.5
14
2
2
7
23
15
6
1
7.5
16
2.5
0
B
24
17
3
E
9
5
1
30
8
4
13
I = 7.915(329.45 x 104)
S = 2.635(43.18 x 103)
12
0
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
MULLION CENTERS IN FEET
SINGLE SPAN
TWIN SPAN
METERS
.5
1
METERS
1.5
.5
2
7
23
1
1.5
2
30
9
29
6.5
21
20
8.5
B
27
6
8
26
19
5.5
4
C
12
3.5
11
D
10
7.5
24
23
7
D
22
6.5
21
E
20
6
19
5.5
18
17
3
E
MULLION HEIGHT IN FEET
B
13
MULLION HEIGHT
EQUAL
EQUAL
4.5
A
14
7-1/2" (190.5)
15
METERS
5
16
C
25
17
MULLION HEIGHT
18
MULLION HEIGHT IN FEET
A
28
9
5
16
2.5
8
7
15
6
171216
13
5
I = 9.594(399.33 x 104)
S = 3.163(51.83 x 103)
12
1
2
3
4
5
6
7
MULLION CENTERS IN FEET
8
4.5
14
2
0
METERS
22
ADMD080EN
4
0
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
kawneer.com
© Kawneer Company, Inc., 2013
.5
TWIN SPAN
LRFD Ultimate
Design Load
33 PSF (1580)
50 PSF (2400)
67 PSF (3200)
83 PSF (4000)
100 PSF (4800)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
METERS
Allowable Stress
Design Load
20 PSF (960)
30 PSF (1440)
40 PSF (1920)
50 PSF (2400)
60 PSF (2880)
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
SINGLE SPAN
EC 97911-095
METERS
26
1600UT SystemTM1 Curtain Wall
MAY, 2016
EC 97911-095
WIND LOAD CHARTS (1" INFILL)
SINGLE SPAN
162016 W/162300
A=
B=
C=
D=
E=
METERS
.5
1
1.5
2
30
29
28
SINGLE SPAN
LRFD Ultimate
Design Load
33 PSF (1580)
50 PSF (2400)
67 PSF (3200)
83 PSF (4000)
100 PSF (4800)
162016 W/162301
METERS
.5
1
1.5
2
30
9
29
28
8.5
8.5
27
25
25
MULLION HEIGHT
A
21
6.5
20
METERS
7
22
6
19
B
18
17
5.5
5
14
E
0
1
2
3
7
23
22
6.5
21
A
20
B
6
19
18
5.5
C
4
4
5
6
7
5
16
4.5
D
13
7.5
24
17
C
16
15
MULLION HEIGHT IN FEET
7.5
24
23
8
26
8
171216
W/162300
171216
W/162301
Ia = 9.594(399.33 x 104)
Sa = 3.163(51.83 x 103)
Is = 3.805(158.37 x 104)
Ss = 1.669(27.35 x 103)
Ia = 9.594(399.33 x 104)
Sa = 3.163(51.83 x 103)
Is = 5.684(236.59 x 104)
Ss = 2.493(40.85 x 103)
D
15
4.5
E
14
4
13
12
0
1
2
3
4
5
6
7
MULLION CENTERS IN FEET
MULLION CENTERS IN FEET
SINGLE SPAN
SINGLE SPAN
162016 W/162301/302
162016 W/162301/302/303
.5
1
8
METERS
1.5
.5
2
30
1
1.5
2
30
9
9
29
29
28
28
8.5
8
26
25
6.5
21
20
B
6
19
18
MULLION HEIGHT IN FEET
MULLION HEIGHT
7
A
22
5.5
C
A
25
7.5
24
23
8
26
METERS
MULLION HEIGHT IN FEET
8.5
27
17
7.5
24
7
23
B
22
6.5
21
C
20
6
19
D
17
16
15
D
5
E
4.5
14
4
13
0
1
2
3
4
5
6
7
8
E
5
16
171216
W/162301/302
171216
W/162301/302/303
Ia = 9.594(399.33 x 104)
Sa = 3.163(51.83 x 103)
Is = 7.893(328.53 x 104)
Ss = 3.462(56.73 x 103)
Ia = 9.594(399.33 x 104)
Sa = 3.163(51.83 x 103)
Is = 9.347(389.05 x 104)
Ss = 4.100(67.19 x 103)
MULLION CENTERS IN FEET
kawneer.com
5.5
18
15
4.5
14
4
13
12
0
1
2
3
4
5
6
7
MULLION CENTERS IN FEET
ADMD080EN
8
METERS
27
12
METERS
8
26
METERS
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Allowable Stress
Design Load
20 PSF (960)
30 PSF (1440)
40 PSF (1920)
50 PSF (2400)
60 PSF (2880)
27
MULLION HEIGHT IN FEET
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
9
12
27
WIND LOAD CHARTS (1" INFILL)
12
0
1
1
2
3
1.5
26
25
23
7
22
21
A
20
19
18
17
16
4
5
6.5
B
6
D
C
5.5
E
15
13
6
7
MULLION CENTERS IN FEET
8
Allowable Stress
Design Load
20 PSF (960)
30 PSF (1440)
40 PSF (1920)
50 PSF (2400)
60 PSF (2880)
LRFD Ultimate
Design Load
33 PSF (1580)
50 PSF (2400)
67 PSF (3200)
83 PSF (4000)
100 PSF (4800)
2
27
8.5
8
24
7.5
5
14
4.5
4
ADMD080EN
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1600UT SystemTM1 Curtain Wall
kawneer.com
© Kawneer Company, Inc., 2013
METERS
10-1/2" (269.9)
28
MULLION HEIGHT
.5
METERS
SINGLE SPAN
A=
B=
C=
D=
E=
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
MULLION HEIGHT IN FEET
28
EC 97911-095
MAY, 2016
I = 36.451(1517.20 x 104)
S = 8.279(135.67 x 103)
171266
1600UT SystemTM1 Curtain Wall
MAY, 2016
EC 97911-095
WIND LOAD CHARTS (1-3/4" INFILL)
SINGLE SPAN
METERS
1
1.5
A=
B=
C=
D=
E=
2
7
23
6.5
21
20
TWIN SPAN
LRFD Ultimate
Design Load
33 PSF (1580)
50 PSF (2400)
67 PSF (3200)
83 PSF (4000)
100 PSF (4800)
METERS
.5
1.5
2
9
29
28
8.5
27
6
A
26
5.5
4
13
A
12
B
11
3.5
C
10
B
23
7
C
22
6.5
21
20
D
6
19
E
18
5.5
5
16
E
8
7.5
24
17
3
D
9
MULLION HEIGHT IN FEET
4.5
14
MULLION HEIGHT
EQUAL
EQUAL
15
METERS
5
6-3/4" (171.5)
17
16
8
25
MULLION HEIGHT
18
2.5
7
15
171201
2
4.5
14
4
13
6
0
1
2
3
4
5
6
7
I = 5.035(209.57 x 104)
S = 1.993(32.66 x 103)
8
MULLION CENTERS IN FEET
12
0
1
2
1
4
5
6
7
8
TWIN SPAN
METERS
METERS
.5
3
MULLION CENTERS IN FEET
SINGLE SPAN
1.5
2
.5
7
23
1
1.5
2
30
9
22
29
6.5
20
6
8
26
5.5
4
13
B
12
3.5
11
C
10
7.5
24
C
23
7
22
6.5
21
D
20
6
19
E
18
5.5
17
3
D
9
MULLION HEIGHT IN FEET
A
MULLION HEIGHT
EQUAL
EQUAL
4.5
14
6-3/4" (171.5)
15
METERS
5
16
B
25
17
MULLION HEIGHT
18
MULLION HEIGHT IN FEET
8.5
27
19
5
16
E
8
2.5
7
2
15
171202
6
5
A
28
4.5
14
4
13
0
1
2
3
4
5
6
7
MULLION CENTERS IN FEET
kawneer.com
8
I = 6.779(282.16 x 104)
S = 2.652(43.46 x 103)
ADMD080EN
12
0
1
2
3
4
5
6
7
MULLION CENTERS IN FEET
8
METERS
21
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
1
30
19
MULLION HEIGHT IN FEET
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
22
Allowable Stress
Design Load
20 PSF (960)
30 PSF (1440)
40 PSF (1920)
50 PSF (2400)
60 PSF (2880)
METERS
.5
5
29
1600UT SystemTM1 Curtain Wall
MAY, 2016
WIND LOAD CHARTS (1-3/4" INFILL)
METERS
1.5
A=
B=
C=
D=
E=
2
7
23
22
6.5
21
20
METERS
.5
2
9
A
28
8.5
27
6
B
26
5.5
B
13
4
C
12
3.5
D
11
E
10
MULLION HEIGHT IN FEET
4.5
A
14
8-1/4" (209.6)
15
METERS
5
16
MULLION HEIGHT
EQUAL
EQUAL
25
17
MULLION HEIGHT
18
MULLION HEIGHT IN FEET
1.5
29
19
8
7.5
C
24
7
23
D
22
6.5
21
E
20
6
19
5.5
18
17
3
5
16
9
2.5
8
15
171203
7
4.5
14
2
4
13
6
5
1
30
0
1
2
3
4
5
6
7
MULLION CENTERS IN FEET
I = 10.135(421.85 x 104)
S = 3.027(49.60 x 103)
8
12
0
1
2
SINGLE SPAN
1
4
5
6
7
8
TWIN SPAN
METERS
.5
3
MULLION CENTERS IN FEET
METERS
1.5
.5
2
7
23
1
1.5
2
30
9
29
6.5
21
20
28
6
8
26
5.5
B
13
4
C
12
D
3.5
11
E
10
MULLION HEIGHT IN FEET
4.5
MULLION HEIGHT
EQUAL
EQUAL
A
14
8-1/4" (209.6)
15
METERS
5
16
D
25
17
MULLION HEIGHT
18
MULLION HEIGHT IN FEET
8.5
C
27
19
7.5
E
24
7
23
22
6.5
21
20
6
19
5.5
18
17
3
9
5
16
2.5
8
15
171204
7
2
4.5
14
4
13
6
5
B
0
1
2
3
4
5
6
7
8
METERS
22
I = 12.736(530.11 x 104)
S = 3.791(62.12 x 103)
MULLION CENTERS IN FEET
12
0
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
ADMD080EN
kawneer.com
© Kawneer Company, Inc., 2013
1
TWIN SPAN
LRFD Ultimate
Design Load
33 PSF (1580)
50 PSF (2400)
67 PSF (3200)
83 PSF (4000)
100 PSF (4800)
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
.5
Allowable Stress
Design Load
20 PSF (960)
30 PSF (1440)
40 PSF (1920)
50 PSF (2400)
60 PSF (2880)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
SINGLE SPAN
EC 97911-095
METERS
30
1600UT SystemTM1 Curtain Wall
MAY, 2016
EC 97911-095
WIND LOAD CHARTS (1-3/4" INFILL)
SINGLE SPAN
162004 W/162300
A=
B=
C=
D=
E=
METERS
.5
1
1.5
2
30
28
Allowable Stress
Design Load
20 PSF (960)
30 PSF (1440)
40 PSF (1920)
50 PSF (2400)
60 PSF (2880)
SINGLE SPAN
LRFD Ultimate
Design Load
33 PSF (1580)
50 PSF (2400)
67 PSF (3200)
83 PSF (4000)
100 PSF (4800)
162004 W/162301
METERS
.5
1.5
2
9
29
28
8.5
8.5
27
25
25
MULLION HEIGHT
6.5
21
A
20
6
B
19
18
METERS
7
22
MULLION HEIGHT IN FEET
7.5
24
23
5.5
C
8
26
17
7.5
24
7
23
22
A
21
6.5
B
20
6
19
C
5.5
18
17
5
16
4.5
E
14
4
13
0
1
2
3
4
5
6
7
D
16
D
15
8
171204
W/162300
171204
W/162301
Ia = 12.736(530.11 x 104)
Sa = 3.791(62.12 x 103)
Is = 3.805(158.37 x 104)
Ss = 1.669(27.35 x 103)
Ia = 12.736(530.11 x 104)
Sa = 3.791(62.12 x 103)
Is = 5.684(236.59 x 104)
Ss = 2.493(40.85 x 103)
5
E
15
4.5
14
4
13
12
0
1
2
3
4
5
6
7
SINGLE SPAN
SINGLE SPAN
162004 W/162301/302/303
METERS
1
8
MULLION CENTERS IN FEET
162004 W/162301/302
.5
METERS
1.5
.5
2
30
1
1.5
2
30
9
9
29
29
28
28
8.5
8
26
25
7
A
22
6.5
21
B
20
MULLION HEIGHT
24
6
19
C
18
MULLION HEIGHT IN FEET
7.5
23
8
26
METERS
MULLION HEIGHT IN FEET
25
© Kawneer Company, Inc., 2013
8.5
27
5.5
17
7.5
24
A
7
23
22
B
21
20
D
5
E
15
4.5
5.5
18
D
14
4
13
0
1
2
3
4
5
6
7
8
171204
W/162301/302/303
Ia = 12.736(530.11 x 104)
Sa = 3.791(62.12 x 103)
Is = 7.893(328.53 x 104)
Ss = 3.462(56.73 x 103)
Ia = 12.736(530.11 x 104)
Sa = 3.791(62.12 x 103)
Is = 9.347(389.05 x 104)
Ss = 4.100(67.19 x 103)
MULLION CENTERS IN FEET
kawneer.com
5
16
171204
W/162301/302
6
C
19
17
16
6.5
E
15
4.5
14
4
13
12
0
1
2
3
4
5
6
7
MULLION CENTERS IN FEET
ADMD080EN
8
METERS
27
12
METERS
8
26
MULLION CENTERS IN FEET
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
1
30
27
MULLION HEIGHT IN FEET
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
9
29
12
31
12
WIND LOAD CHARTS (1-3/4" INFILL)
0
1
1
2
3
1.5
26
25
23
22
A
7
21
6.5
20
19
B
18
17
D
16
E
4
5
6
6
C
5.5
15
13
7
MULLION CENTERS IN FEET
8
Allowable Stress
Design Load
20 PSF (960)
30 PSF (1440)
40 PSF (1920)
50 PSF (2400)
60 PSF (2880)
LRFD Ultimate
Design Load
33 PSF (1580)
50 PSF (2400)
67 PSF (3200)
83 PSF (4000)
100 PSF (4800)
2
27
8.5
8
24
7.5
5
14
4.5
4
ADMD080EN
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1600UT SystemTM1 Curtain Wall
kawneer.com
© Kawneer Company, Inc., 2013
METERS
11-1/4" (285.8)
28
MULLION HEIGHT
.5
METERS
SINGLE SPAN
A=
B=
C=
D=
E=
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
MULLION HEIGHT IN FEET
32
EC 97911-095
MAY, 2016
I = 42.441(1766.52 x 104)
S = 8.816(144.47 x 103)
171264
GLASS HEIGHT IN FEET
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
kawneer.com
9
8
6
0
0
B
3
0
0
1
1
2
2
3
3
4
4
5
5
6
1
4
6
7
8
7
7
2
5
4
A
1
10
B
2
6
3
GLASS HEIGHT IN FEET
6" (152.4)
171213
METERS
2
13
13
1
12
12
11
11
3
10
8
9
3
5
A
1
8
SPAN IN FEET
ADMD080EN
7
6
2
2
1
1
0
13
13
12
12
11
11
2
2
1
1
0
B
4
3
0
0
1
1
2
SPAN IN FEET
7-1/2" (190.5)
METERS
2
3
2
3
4
171215
4
5
SPAN IN FEET
5
6
1
5
4
6
7
7
7
2
A
10
B
6
2
A
3
1
8
METERS
EC 97911-095
METERS
7
GLASS HEIGHT IN FEET
10
METERS
1
METERS
GLASS HEIGHT IN FEET
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
MAY, 2016
1600UT SystemTM1 Curtain Wall
33
DEADLOAD CHARTS (TUBULAR)
A - 1" GLASS (1/4 POINT LOADING)
B - 1" GLASS (1/8 POINT LOADING)
6" (152.4)
171214
METERS
2
9
3
8
5
1
8
SPAN IN FEET
7-1/2" (190.5)
171216
METERS
2
9
3
8
GLASS HEIGHT IN FEET
6
5
4
3
0
0
0
0
1
1
2
2
3
3
4
4
5
5
6
1
5
4
6
171202
2
METERS
13
13
1
12
12
11
11
3
8
7
2
B
A
1
2
2
1
1
7
7
8
10
7
3
0
SPAN IN FEET
13
13
12
12
11
11
3
9
8
6
2
A
B
1
2
2
1
1
8
0
SPAN IN FEET
ADMD080EN
0
0
1
1
2
8-1/4" (209.6)
METERS
2
3
2
3
4
171203
4
5
2
10
9
3
8
7
6
2
5
4
B
3
A
1
6
1
3
5
6
7
171204
METERS
2
10
9
3
8
7
6
2
5
B
4
A
7
1
SPAN IN FEET
8
kawneer.com
© Kawneer Company, Inc., 2013
171201
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
6-3/4" (171.5)
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
DEADLOAD CHARTS (TUBULAR)
METERS
1600UT SystemTM1 Curtain Wall
METERS
9
GLASS HEIGHT IN FEET
10
GLASS HEIGHT IN FEET
1
METERS
METERS
METERS
GLASS HEIGHT IN FEET
34
EC 97911-095
MAY, 2016
A - 1-3/4" GLASS (1/4 POINT LOADING)
B - 1-3/4" GLASS (1/8 POINT LOADING)
6-3/4" (171.5)
SPAN IN FEET
8
8-1/4" (209.6)
GLASS HEIGHT IN FEET
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
kawneer.com
9
8
6
0
0
2
5
4
3
2
1
A
0
0
1
1
2
2
3
3
4
4
5
5
6
1
4
3
6
7
10
7
6
2
5
A
7
GLASS HEIGHT IN FEET
171296
171292
(DOTTED)
METERS
2
13
13
1
12
12
11
11
3
10
1
B
8
9
3
8
B
1
8
SPAN IN FEET
ADMD080EN
7
6
0
13
13
12
12
11
11
2
2
1
1
0
2
3
2
A B
SPAN IN FEET
0
0
1
1
2
METERS
2
3
2
3
4
4
5
SPAN IN FEET
5
6
1
5
4
6
7
10
7
6
3
7
8
METERS
EC 97911-095
2
B
A
1
METERS
7
GLASS HEIGHT IN FEET
10
METERS
1
METERS
GLASS HEIGHT IN FEET
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
MAY, 2016
1600UT SystemTM1 Curtain Wall
35
DEADLOAD CHARTS (OPENBACK)
A - 1" GLASS (1/4 POINT LOADING)
B - 1" GLASS (1/8 POINT LOADING)
171297
171293
(DOTTED)
METERS
2
9
3
8
5
4
1
1
SPAN IN FEET
8
171296
171292
(DOTTED)
171297
171293
(DOTTED)
171077
REINF.
171078
REINF.
METERS
2
9
3
8
GLASS HEIGHT IN FEET
4
3
2
1
0
0
0
0
1
1
2
2
3
3
4
4
5
5
6
1
7
6
4
3
6
METERS
2
METERS
13
13
1
12
12
11
11
3
8
6
2
5
B
1
A
7
7
8
10
B
A
0
SPAN IN FEET
13
13
12
12
11
11
9
3
8
2
5
1
2
2
1
1
8
0
SPAN IN FEET
ADMD080EN
0
0
1
1
2
METERS
2
3
2
3
2
10
9
3
8
7
6
2
5
4
3
2
B
1
A
4
4
5
6
1
5
6
7
10
8
7
B
6
2
4
3
A
7
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
171295
171291
(DOTTED)
171294
171290
(DOTTED)
171295
171291
(DOTTED)
171077
REINF.
171078
REINF.
METERS
2
9
3
5
1
SPAN IN FEET
8
kawneer.com
© Kawneer Company, Inc., 2013
171294
171290
(DOTTED)
METERS
DEADLOAD CHARTS (OPENBACK)
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
9
GLASS HEIGHT IN FEET
1600UT SystemTM1 Curtain Wall
METERS
7
GLASS HEIGHT IN FEET
10
METERS
1
METERS
GLASS HEIGHT IN FEET
36
EC 97911-095
MAY, 2016
A - 1" GLASS (1/4 POINT LOADING)
B - 1" GLASS (1/8 POINT LOADING)
1
SPAN IN FEET
8
GLASS HEIGHT IN FEET
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
kawneer.com
9
0
0
3
8
6
2
5
4
3
2
1
0
0
1
1
2
2
3
3
4
4
5
5
6
1
4
3
6
7
10
7
2
6
5
A
7
GLASS HEIGHT IN FEET
171294
171290
(DOTTED)
METERS
2
13
13
1
12
12
11
11
10
1
B
A
8
9
3
8
B
1
8
SPAN IN FEET
ADMD080EN
7
6
0
13
13
12
12
11
11
2
2
1
1
0
2
3
2
SPAN IN FEET
0
0
1
1
2
METERS
2
3
2
3
4
4
5
6
1
5
4
SPAN IN FEET
5
6
7
10
7
6
2
A
B
3
1
7
8
METERS
EC 97911-095
METERS
7
GLASS HEIGHT IN FEET
10
METERS
1
METERS
GLASS HEIGHT IN FEET
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
MAY, 2016
1600UT SystemTM1 Curtain Wall
37
DEADLOAD CHARTS (OPENBACK)
A - 1-3/4" GLASS (1/4 POINT LOADING)
B - 1-3/4" GLASS (1/8 POINT LOADING)
171295
171291
(DOTTED)
METERS
2
9
3
8
5
4
A B
1
1
SPAN IN FEET
8
171294
171290
(DOTTED)
171295
171291
(DOTTED)
171077
REINF.
171078
REINF.
METERS
2
9
3
8
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1600UT SystemTM1 Curtain Wall
BLANK PAGE
ADMD080EN
kawneer.com
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
38
EC 97911-095
MAY, 2016
1600UT SystemTM1 Curtain Wall
MAY, 2016
EC 97911-095
THERMAL CHARTS
Generic Project Specific U-factor Example Calculation
(Percent of Glass will vary on specific products depending on sitelines)
(Based on single bay of Curtain Wall/Window Wall)
2-1/2" Typ.
4'-0"
3'-0"
D.L.O. D.L.O.
VISION
VISION
6'-0"
D.L.O.
SPANDREL
9'-0"
D.L.O.
31'-3"
8'-0"
D.L.O.
SPANDREL
VISION
5'-0"
D.L.O.
Vision Area
Example Glass U-factor
= 0.48 Btu/(ft2 · h · °F)
Vision Area
= 5(9 + 8 + 4) = 105.0 ft2
Total Area (Vision)
= 5' 2-1/2" (9' 3-3/4" + 8' 2-1/2" + 4' 2-1/2") = 113.2 ft2
Percentage of Vision Glass
= (Vision Area ÷ Total Area)100
= (105.0 ÷ 113.2)100 = 93%
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
2-1/2" Typ.
Spandrel Area
Example Spandrel R-value
= 15 (ft2 · h · °F)/Btu
Spandrel Area
= 5(6 + 3) = 45.0 ft2
Total Area (Spandrel)
= 5' 2-1/2" (6' 2-1/2" + 3' 3-3/4") = 49.6 ft2
Percent of Spandrel
kawneer.com
= (Spandrel Area ÷ Total Area)100
= (45.0 ÷ 49.6)100 = 91%
ADMD080EN
39
40
1600UT SystemTM1 Curtain Wall
MAY, 2016
THERMAL CHARTS
EC 97911-095
Vision Area Chart
System U-factor vs Percent of Vision Area
E IGN
PL S
M E
A D
EX OR
F
T
COG
U-factor
0.53
0.50
0.40
0.30
)
0.48
0.46
0.44
0.42
0.40
0.38
0.36
0.34
0.32
0.30
0.28
0.26
0.24
0.22
0.20
0.60
Btu
h·ft 2·°F
System U-factor
O
(N
0.70
93%
0.20
95
85
90
75
80
70
Vision Area / Total Area (%)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
0.80
System U-factor vs Percent of Spandrel Area
Spandrel
R-value
E IGN
PL S
M E
A D
EX OR
F
O
0.50
T
3.00
4.00
5.00
0.21
0.20
0.10
91%
95
0.30
)
11.00
15.00
19.00
30.00
0.40
Btu
h·ft 2·°F
System U-factor
(N
2.00
0.60
90
85
80
75
70
Spandrel Area / Total Area (%)
Based on a single curtain wall bay of 91% spandrel and center of
spandrel R-value of 15, system U-factor is equal to 0.21 Btu/(h·ft 2·°F)
ADMD080EN
kawneer.com
© Kawneer Company, Inc., 2013
Spandrel Area Chart
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Based on a single curtain wall bay of 93% vision glass and center
of glass U-factor of 0.48, System U-factor is equal to 0.53 Btu/(h·ft 2·°F)
1600UT SystemTM1 Curtain Wall
MAY, 2016
EC 97911-095
THERMAL CHARTS
Note:
Values in parentheses are metric.
COG=Center of Glass.
Charts are generated per AAMA 507.
1" GLAZING WITH ALUMINUM PRESSURE PLATE
System U-Factor (Btu/h·ft2·°F)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
System U-Factor for Vision Glass
COG
U-factor
0.47 (2.67)
0.46 (2.61)
0.42 (2.39)
0.40 (2.27)
0.38 (2.16)
0.36 (2.05)
0.34 (1.93)
0.32 (1.82)
0.30 (1.71)
0.28 (1.59)
0.26 (1.48)
0.24 (1.37)
0.22 (1.25)
0.20 (1.14)
0.18 (1.02)
0.16 (0.91)
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
0.44 (2.50)
0.14 (0.79)
0.12 (0.68)
0.10 (0.57)
Vision Area / Total Area (%)
Notes for System U-Factor, SHGC and VT charts:
For glass values that are not listed, linear interpolation is permitted.
Glass properties are based on center of glass values (winter conditions) and are obtained
from your glass supplier.
kawneer.com
ADMD080EN
41
System Solar Heat Gain Coefficient (SHGC) vs Percent of Vision Area
COG
SHGC
System Visible Transmittance (VT) vs Percent of Vision Area
COG
VT
Vision Ares / Total Area (%)
Charts are generated per AAMA 507.
ADMD080EN
kawneer.com
© Kawneer Company, Inc., 2013
THERMAL CHARTS
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
System SHGC
1600UT SystemTM1 Curtain Wall
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
System VT
42
EC 97911-095
MAY, 2016
1" GLAZING WITH ALUMINUM PRESSURE PLATE
Vision Area / Total Area (%)
Charts are generated per AAMA 507.
1600UT SystemTM1 Curtain Wall
MAY, 2016
EC 97911-095
THERMAL PERFORMANCE MATRIX (NFRC SIZE)
1" GLAZING WITH
ALUMINUM PRESSURE PLATE
Thermal Transmittance 1 (BTU/hr • ft 2 • °F)
Overall U-Factor 4
0.47
0.54
0.46
0.53
0.44
0.52
0.42
0.50
0.40
0.48
0.38
0.47
0.36
0.45
0.34
0.43
0.32
0.42
0.30
0.40
0.28
0.38
0.26
0.37
0.24
0.35
0.22
0.33
0.20
0.32
0.18
0.30
0.16
0.28
0.14
0.26
0.12
0.25
0.10
0.23
NOTE:For glass values that are not listed, linear
interpolation is permitted.
1.
2.
3.
4.
SHGC Matrix 2
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
Glass U-Factor 3
kawneer.com
43
U-Factors are determined in accordance with NFRC 100.
SHGC and VT values are determined in accordance with
NFRC 200.
Glass properties are based on center of glass values and
are obtained from your glass supplier.
Overall U-Factor, SHGC, and VT Matricies are based on
the standard NFRC specimen size of 2000mm wide by
2000mm high (78-3/4" by 78-3/4").
Visible Transmittance 2
Glass SHGC 3
Overall SHGC 4
Glass VT 3
Overall VT 4
0.75
0.68
0.75
0.67
0.70
0.64
0.70
0.63
0.65
0.59
0.65
0.58
0.60
0.55
0.60
0.54
0.55
0.50
0.55
0.49
0.50
0.46
0.50
0.45
0.45
0.41
0.45
0.40
0.40
0.37
0.40
0.36
0.35
0.32
0.35
0.31
0.30
0.28
0.30
0.27
0.25
0.24
0.25
0.22
0.20
0.19
0.20
0.18
0.15
0.15
0.15
0.13
0.10
0.10
0.10
0.09
0.05
0.06
0.05
0.04
ADMD080EN
44
1600UT SystemTM1 Curtain Wall
MAY, 2016
EC 97911-095
THERMAL CHARTS
Note:
Values in parentheses are metric.
COG=Center of Glass.
Charts are generated per AAMA 507.
1" GLAZING WITH FIBERGLASS PRESSURE PLATE
0.47 (2.67)
0.46 (2.61)
0.44 (2.50)
0.42 (2.39)
0.40 (2.27)
0.38 (2.16)
0.36 (2.05)
0.34 (1.93)
0.32 (1.82)
0.30 (1.71)
0.28 (1.59)
0.26 (1.48)
0.24 (1.37)
0.22 (1.25)
0.20 (1.14)
0.18 (1.02)
0.16 (0.91)
0.14 (0.79)
0.12 (0.68)
0.10 (0.57)
Vision Area / Total Area (%)
Notes for System U-Factor, SHGC and VT charts:
For glass values that are not listed, linear interpolation is permitted.
Glass properties are based on center of glass values (winter conditions) and are obtained
from your glass supplier.
ADMD080EN
kawneer.com
© Kawneer Company, Inc., 2013
COG
U-factor
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
System U-Factor (Btu/h·ft2·°F)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
System U-Factor for Vision Glass
System VT
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
System SHGC
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
MAY, 2016
kawneer.com
1600UT SystemTM1 Curtain Wall
EC 97911-095
Vision Ares / Total Area (%)
Charts are generated per AAMA 507.
ADMD080EN
45
THERMAL CHARTS
1" GLAZING WITH FIBERGLASS PRESSURE PLATE
System Solar Heat Gain Coefficient (SHGC) vs Percent of Vision Area
COG
SHGC
Vision Area / Total Area (%)
Charts are generated per AAMA 507.
System Visible Transmittance (VT) vs Percent of Vision Area
COG
VT
1600UT SystemTM1 Curtain Wall
MAY, 2016
EC 97911-095
THERMAL PERFORMANCE MATRIX (NFRC SIZE)
Overall U-Factor 4
0.47
0.53
0.46
0.52
0.44
0.50
0.42
0.49
0.40
0.47
0.38
0.45
0.36
0.44
0.34
0.42
0.32
0.40
0.30
0.39
0.28
0.37
0.26
0.35
0.24
0.34
0.22
0.32
0.20
0.31
0.18
0.28
0.16
0.27
0.14
0.25
0.12
0.23
0.10
0.22
NOTE:For glass values that are not listed, linear
interpolation is permitted.
1.
2.
3.
4.
SHGC Matrix 2
U-Factors are determined in accordance with NFRC 100.
SHGC and VT values are determined in accordance with
NFRC 200.
Glass properties are based on center of glass values and
are obtained from your glass supplier.
Overall U-Factor, SHGC, and VT Matricies are based on
the standard NFRC specimen size of 2000mm wide by
2000mm high (78-3/4" by 78-3/4").
Visible Transmittance 2
Glass SHGC 3
Overall SHGC 4
Glass VT 3
Overall VT 4
0.75
0.68
0.75
0.67
0.70
0.64
0.70
0.63
0.65
0.59
0.65
0.58
0.60
0.55
0.60
0.54
0.55
0.50
0.55
0.49
0.50
0.46
0.50
0.45
0.45
0.41
0.45
0.40
0.40
0.37
0.40
0.36
0.35
0.32
0.35
0.31
0.30
0.28
0.30
0.27
0.25
0.24
0.25
0.22
0.20
0.19
0.20
0.18
0.15
0.15
0.15
0.13
0.10
0.10
0.10
0.09
0.05
0.06
0.05
0.04
ADMD080EN
kawneer.com
© Kawneer Company, Inc., 2013
Glass U-Factor 3
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1" GLAZING WITH
FIBERGLASS PRESSURE PLATE
Thermal Transmittance 1 (BTU/hr • ft 2 • °F)
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
46
1600UT SystemTM1 Curtain Wall
MAY, 2016
EC 97911-095
THERMAL CHARTS
Note:
Values in parentheses are metric.
COG=Center of Glass.
Charts are generated per AAMA 507.
1-3/4" GLAZING WITH ALUMINUM PRESSURE PLATE
System U-Factor (Btu/h·ft2·°F)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
System U-Factor for Vision Glass
0.32 (1.82)
0.30 (1.71)
0.28 (1.59)
0.26 (1.48)
0.24 (1.37)
0.22 (1.25)
0.20 (1.14)
0.18 (1.02)
0.16 (0.91)
0.14 (0.80)
0.12 (0.68)
0.10 (0.57)
0.08 (0.45)
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
COG
U-factor
Vision Area / Total Area (%)
Notes for System U-Factor, SHGC and VT charts:
For glass values that are not listed, linear interpolation is permitted.
Glass properties are based on center of glass values (winter conditions) and are obtained
from your glass supplier.
kawneer.com
ADMD080EN
47
System Solar Heat Gain Coefficient (SHGC) vs Percent of Vision Area
COG
SHGC
System Visible Transmittance (VT) vs Percent of Vision Area
COG
VT
Vision Ares / Total Area (%)
Charts are generated per AAMA 507.
ADMD080EN
kawneer.com
© Kawneer Company, Inc., 2013
THERMAL CHARTS
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
System SHGC
1600UT SystemTM1 Curtain Wall
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
System VT
48
EC 97911-095
MAY, 2016
1-3/4" GLAZING WITH ALUMINUM PRESSURE PLATE
Vision Area / Total Area (%)
Charts are generated per AAMA 507.
1600UT SystemTM1 Curtain Wall
MAY, 2016
EC 97911-095
THERMAL PERFORMANCE MATRIX (NFRC SIZE)
1-3/4" GLAZING WITH
ALUMINUM PRESSURE PLATE
Thermal Transmittance 1 (BTU/hr • ft 2 • °F)
Overall U-Factor 4
0.32
0.42
0.30
0.40
0.28
0.38
0.26
0.37
0.24
0.35
0.22
0.33
0.20
0.32
0.18
0.30
0.16
0.28
0.14
0.26
0.12
0.25
0.10
0.23
0.08
0.21
NOTE:For glass values that are not listed, linear
interpolation is permitted.
1.
2.
3.
4.
SHGC Matrix 2
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
Glass U-Factor 3
kawneer.com
49
U-Factors are determined in accordance with NFRC 100.
SHGC and VT values are determined in accordance with
NFRC 200.
Glass properties are based on center of glass values and
are obtained from your glass supplier.
Overall U-Factor, SHGC, and VT Matricies are based on
the standard NFRC specimen size of 2000mm wide by
2000mm high (78-3/4" by 78-3/4").
Visible Transmittance 2
Glass SHGC 3
Overall SHGC 4
Glass VT 3
Overall VT 4
0.75
0.68
0.75
0.67
0.70
0.64
0.70
0.63
0.65
0.59
0.65
0.58
0.60
0.55
0.60
0.54
0.55
0.50
0.55
0.49
0.50
0.46
0.50
0.45
0.45
0.41
0.45
0.40
0.40
0.37
0.40
0.36
0.35
0.32
0.35
0.31
0.30
0.28
0.30
0.27
0.25
0.24
0.25
0.22
0.20
0.19
0.20
0.18
0.15
0.15
0.15
0.13
0.10
0.10
0.10
0.09
0.05
0.06
0.05
0.04
ADMD080EN
50
1600UT SystemTM1 Curtain Wall
MAY, 2016
EC 97911-095
THERMAL CHARTS
Note:
Values in parentheses are metric.
COG=Center of Glass.
Charts are generated per AAMA 507.
1-3/4" GLAZING WITH FIBERGLASS PRESSURE PLATE
0.32 (1.82)
0.30 (1.71)
0.28 (1.59)
0.26 (1.48)
0.24 (1.37)
0.22 (1.25)
0.20 (1.14)
0.18 (1.02)
0.16 (0.91)
0.14 (0.80)
0.12 (0.68)
0.10 (0.57)
0.08 (0.45)
Vision Area / Total Area (%)
Notes for System U-Factor, SHGC and VT charts:
For glass values that are not listed, linear interpolation is permitted.
Glass properties are based on center of glass values (winter conditions) and are obtained
from your glass supplier.
ADMD080EN
kawneer.com
© Kawneer Company, Inc., 2013
COG
U-factor
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
System U-Factor (Btu/h·ft2·°F)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
System U-Factor for Vision Glass
System VT
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
System SHGC
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
MAY, 2016
kawneer.com
1600UT SystemTM1 Curtain Wall
EC 97911-095
Vision Ares / Total Area (%)
Charts are generated per AAMA 507.
ADMD080EN
51
THERMAL CHARTS
1-3/4" GLAZING WITH FIBERGLASS PRESSURE PLATE
System Solar Heat Gain Coefficient (SHGC) vs Percent of Vision Area
COG
SHGC
Vision Area / Total Area (%)
Charts are generated per AAMA 507.
System Visible Transmittance (VT) vs Percent of Vision Area
COG
VT
1600UT SystemTM1 Curtain Wall
MAY, 2016
EC 97911-095
THERMAL PERFORMANCE MATRIX (NFRC SIZE)
Overall U-Factor 4
0.32
0.41
0.30
0.39
0.28
0.37
0.26
0.36
0.24
0.34
0.22
0.32
0.20
0.31
0.18
0.29
0.16
0.27
0.14
0.25
0.12
0.24
0.10
0.22
0.08
0.20
NOTE:For glass values that are not listed, linear
interpolation is permitted.
1.
2.
3.
4.
SHGC Matrix 2
U-Factors are determined in accordance with NFRC 100.
SHGC and VT values are determined in accordance with
NFRC 200.
Glass properties are based on center of glass values and
are obtained from your glass supplier.
Overall U-Factor, SHGC, and VT Matricies are based on
the standard NFRC specimen size of 2000mm wide by
2000mm high (78-3/4" by 78-3/4").
Visible Transmittance 2
Glass SHGC 3
Overall SHGC 4
Glass VT 3
Overall VT 4
0.75
0.68
0.75
0.67
0.70
0.64
0.70
0.63
0.65
0.59
0.65
0.58
0.60
0.55
0.60
0.54
0.55
0.50
0.55
0.49
0.50
0.46
0.50
0.45
0.45
0.41
0.45
0.40
0.40
0.37
0.40
0.36
0.35
0.32
0.35
0.31
0.30
0.28
0.30
0.27
0.25
0.24
0.25
0.22
0.20
0.19
0.20
0.18
0.15
0.15
0.15
0.13
0.10
0.10
0.10
0.09
0.05
0.06
0.05
0.04
ADMD080EN
kawneer.com
© Kawneer Company, Inc., 2013
Glass U-Factor 3
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1-3/4" GLAZING WITH
FIBERGLASS PRESSURE PLATE
Thermal Transmittance 1 (BTU/hr • ft 2 • °F)
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
52
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
MAY, 2016
kawneer.com
1600UT SystemTM1 Curtain Wall
EC 97911-095
PRESSURE PLATE
TYPE
CRF
FRAME GLASS
I-VALUE
FRAME GLASS
1" DOUBLE GLAZING INFILL
ALUMINUM
FIBERGLASS
7976
7167
76
68
1-3/4" TRIPLE GLAZING INFILL
ALUMINUM
FIBERGLASS
82
74
76
ADMD080EN
81
53
THERMAL CHARTS
CONDENSATION RESISTANCE
77
78
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1600UT SystemTM1 Curtain Wall
BLANK PAGE
ADMD080EN
kawneer.com
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
54
EC 97911-095
MAY, 2016
Similar pages