CER0005A 1575.4 MHz GPS BPF Rev 0 – Origin Date: July 11, 2005 – Revision Date: July 11, 2005 Features • Low Loss • Excellent Rejection • Small Size Description Surface mount, silver (Ag) coated ceramic filter. Developed for use in Commercial and Military GPS L1 Applications. Weight: 2.03 grams typical Material: Filter is composed of a ceramic block coated with Ag. Filter complies with RoHS standards. Electrical Specifications Parameter Frequency (MHz) Typical @ 25ºC Spec. @ 25ºC Passband Insertion Loss 1564.4 – 1585.4 1.5 dB 1.8 dB max Passband Return Loss 1564.4 – 1585.4 14 dB 10.0 dB min Attenuation: 1435.4 46 dB 35.0 dB min 1540.4 20 dB 7.0 dB max 1610.4 10 dB 7.0 dB min 1715.4 35 dB 30.0 dB min Power into any port 1 Watt max Note: Supplier shall test each filter to the critical electrical specifications of the above table. Any subsequent audits may deviate from in value due to measurement repeatability among different test systems. Such deviations shall not exceed the following limits: Specification Allowance Insertion Loss 0.1 dB Return Loss 1.0 dB Stopbands 1.0 dB •“This product is covered by one or more of the following U.S. and foreign patents including: US 4,692,726;US 4,742,562; US 4,800,348;US 4,829,274;US 5,146,193;EP 0573597;DE 0573597;FR 0573597;JP 508149/92;KR 142171;US 5,162,760;US 5,218,329;US 5,250,916;US 5,327,109;US 5,488,335;CA 2114029;FR 9306297;GB 2273393;JP 3205337;KR 115113;CN 93106228.4;US 5,512,866;EP 0706719;DE 0706719;FR 0706719;GB 0706719;CN 95190359.4;US 5,602,518;US 5,721,520;US 5,745,018;EP 0910875;DE 0910875;DK 0910875;FR 0910875;GB 0910875;IE 0910875;JP 505182/98;KR 10-323013;US 5,994,978;US 6,462,629;CN 00810420.4;US 6,559,735;US 6,650,202;US 6,834,429.Other US and foreign patents pending. •CTS Corporation 2006 reserves all copyrights in the layout, design and configuration of the patterns on this product.” Document No. 008-0256-0 Page 1 of 2 - CTS Electronic Components - www.ctscorp.com - 171 Covington Drive - Bloomingdale, IL 60108 - Rev. X4VH CER0005A 1575.4 MHz GPS BPF Rev 0 – Origin Date: July 11, 2005 – Revision Date: July 11, 2005 Mechanical Drawing F J G I CL E D B Input Nominal (mm) A B C D E F G I J 11.75 7.55 4.50 3.30 3.30 1.27 0.76 1.27 0.76 Tolerance (mm) +/or max Max Max Max 0.127 0.127 0.127 0.127 0.127 0.127 8.74 9.41 10.97 11.54 10.04 11.54 PCB Layout 7.17 Electrical response 5.30 6.24 C A 0.00 0.57 2.13 2.80 4.36 Output Dim 0.00 1.50 -0.30 0.00 0.25 1.27 2.03 2.53 4.48 5.48 7.30 7.55 Packaging and Marking DIMENSION REEL DIAMETER REEL WEIGHT REEL QUANTITY UNITS SPECIFICATION mm kg ea. 330 2.7 800 Customer Feed Direction Document No. 008-0256-0 Page 2 of 2 - CTS Electronic Components - www.ctscorp.com - 171 Covington Drive - Bloomingdale, IL 60108 - Rev. X4VH