Data Sheet

Model 658
CLOCK, HIGH FREQUENCY MULTIPLIER
FEATURES
•
•
•
•
•
•
•
•
•
•
Standard 7x5mm Surface Mount Footprint
LVCMOS, Differential LVPECL or LVDS Outputs
Frequency Range 38 – 750 MHz
Frequency Stability, ±50 ppm Standard
(± 25 ppm and ± 100 ppm available)
+2.5Vdc or +3.3Vdc Operation
Operating Temperature to –40°C to +85°C
Output Enable Standard
Low Phase Jitter, PLL Multiplier
Tape & Reel Packaging
RoHS/Green Compliant
DESCRIPTION
The Model 658 is a ceramic packaged Clock
oscillator offering reduced size and enhanced
stability. The small size means it is perfect for
any application. The enhanced stability means it
is the perfect choice for today’s communications
applications that require tight frequency control.
ORDERING INFORMATION
658
M
OUTPUT TYPE
FREQUENCY IN MHz
C = CMOS, Pin 1 Enable Pin 2 N.C. (standard)
L = LVDS, Pin 1 Enable Pin 2 N.C. (standard)
P = PECL, Pin 1 Enable Pin 2 N.C. (standard)
M = CMOS, Pin1 N.C. Pin 2 Enable
V = LVDS, Pin1 N.C. Pin 2 Enable
E = PECL, Pin1 N.C. Pin 2 Enable
M - indicates MHz and decimal point.
Frequency is recorded with minimum 4
significant digits to the right of the "M".
SUPPLY VOLTAGE
2 = 2.5 Vdc (LVDS and PECL only)
3 = 3.3 Vdc
FREQUENCY STABILITY
5 = ± 25 ppm
3 = ± 50 ppm (standard)
2 = ± 100 ppm
OPERATING TEMPERATURE RANGE
C = 0°C to +70°C (standard)
I = -40°C to +85°C
Example Part Number: 658P3C3155M5200
Document No. 008-0316-0
Page 1 - 5
Rev. A
٠ ٠ ٠ CTS Electronic Components, Inc. ٠ 171 Covington Drive ٠ Bloomingdale, IL 60108 ٠ ٠ ٠
٠ ٠ ٠ www.ctscorp.com ٠ ٠ ٠
Model 658
7x5mm Low Cost
LVCMOS, LVPECL or LVDS Clock
ELECTRICAL CHARACTERISTICS
PARAMETER
Absolute Maximums
SYMBOL
CONDITIONS
MIN
TYP
MAX
Maximum Supply Voltage
VCC
-
-0.5
-
7.0
V
Storage Temperature
TSTG
-
-55
-
125
°C
fO
-
MHz
Frequency Range
LVCMOS
LVPECL and LVDS
Frequency Stability
(See Note 1 and Ordering Information)
∆f/fO
-
TA
-
50
-
250
38
-
750
-
-
25, 50 or
100
± ppm
70
°C
Operating Temperature
Commercial
0
Industrial
Supply Voltage
(See Ordering Information)
VCC
Supply Current
LVPECL
2.5
3.3
85
2.63
3.47
< 160 MHz
≥ 160 MHz
-
-
40
50
< 160 MHz
≥ 160 MHz
-
-
75
100
< 160 MHz
≥ 160 MHz
-
60
80
Application of VCC
-
-
10
ms
Bandwidth 12 kHz - 20 MHz
-
3.5
5
ps RMS
V
±5%
Phase Jitter
V
Maximum Load
ICC
LVDS
Start Up Time
25
-40
2.38
3.14
LVCMOS
Electrical and Waveform Parameters
UNIT
TS
tjms
mA
Enable Function
Enable Input Voltage
VIH
Pin 1 or Pin 2 Logic '1', Output Enabled
0.7*VCC
-
-
Disable Input Voltage
VIL
Pin 1 or Pin 2 Logic '0', Output Disabled
-
-
0.3*VCC
IIL
Pin 1 or Pin 2 Logic '1' , Output Disabled
Pin 1 or Pin 2 Logic '1'
-
-
20
uA
-
5
10
ms
Disable Current
Enable Time
LVCMOS WAVEFORM
Output Load
TPLZ
-
-
15
pF
45
-
55
%
CMOS Load
90%VCC
-
-
V
CMOS Load
-
-
10%VCC
-
2
5.0
ns
-
50
-
Ohms
45
-
55
%
V
CL
Output Duty Cycle
SYM
Output Voltage Levels
Logic '1' Level
VOH
VOL
@ 20% - 80% Levels
Logic '0' Level
Rise and Fall Time
LVPECL WAVEFORM
Output Load
TR, TF
@ 50% Level
-
RL
Output Duty Cycle
SYM
Output Voltage Levels
Logic '1' Level
VOH
PECL Load
VCC - 1.025V
-
-
VOL
PECL Load
-
-
VCC - 1.62V
0.4
1.0
ns
Ohms
Logic '0' Level
Rise and Fall Time
LVDS WAVEFORM
Output Load
TR, TF
@ VCC - 1.3V
@ 20% - 80% Levels
-
100
-
Output Duty Cycle
SYM
@ 1.25V
45
-
55
%
Differential Voltage
VOD
RL = 100 Ohms
250
350
450
mV
Output Voltage Levels
Logic '1' Level
VOH
LVDS Load
-
-
1.6
V
VOL
LVDS Load
0.9
-
-
-
0.4
1.0
Logic '0' Level
Rise and Fall Time
-
RL
TR, TF
@ 20% - 80% Levels
ns
Notes:
1. Inclusive of initial tolerance at time of shipment, changes in supply voltage, load, temperature and 10 year aging
at an average operating temperature of +40 °C.
Document No. 008-0316-0
٠ ٠ ٠ CTS Electronic Components, Inc. ٠
Page 2 - 5
171 Covington Drive
Rev. A
٠
Bloomingdale, IL 60108
٠٠٠
Model 658
7x5mm Low Cost
LVCMOS, LVPECL or LVDS Clock
CMOS/TTL OUTPUT WAVEFORM
Tr
TEST CIRCUIT, CMOS LOAD
Tf
N.C.
VOH
+
-
mA
90%, 80%, 2.4V
6
+
50%, 1.5V
+
POWER
SUPPLY
10%, 20%, 0.5V
VM
-
4
5
0.01uF
D.U.T.
CL
1
2
Including probe
capacitance.
3
VOL
UPTIME (t)
PERIOD (T)
Enable Input or N.C.
DUTY CYCLE = t/T x 100 (%)
PECL/LVDS OUTPUT WAVEFORM
Tr
N.C. or Enable Input
TEST CIRCUIT, PECL LOAD
Vcc - 2.0V
Tf
VOH
OUT
RL
50
80%
VOS
CH2
+
50%
-
mA
CH1
6
+
20%
OUT
5
4
0.01uF
VM
-
VOL
UPTIME (t)
+
POWER
SUPPLY
RL
50
D.U.T.
Vcc - 2.0V
1
2
3
PERIOD (T)
DUTY CYCLE = t/T x 100 (%)
Enable Input or N.C.
N.C. or Enable Input
TEST CIRCUIT, LVDS LOAD
D.U.T. PIN ASSIGNMENTS
PIN
1
2
3
4
SYMBOL
EOH / NC
NC / EOH
GND
Output
5
Output / NC
6
VCC
CH2
DESCRIPTION
Enable or No Connect
No Connect or Enable
Circuit & Package Ground
RF Output
Complimentary RF Output
+
mA
RL
100
-
CH1
6
+
(PECL and LVDS Only)
+
POWER
SUPPLY
Supply Voltage
-
5
4
0.01uF
D.U.T.
VM
1
2
3
ENABLE TRUTH TABLE
PIN 1 or 2
Logic ‘1’
Open
Logic ‘0’
PIN 4 / PIN 5
Output
Output
High Imp.
Document No. 008-0316-0
٠ ٠ ٠ CTS Electronic Components, Inc. ٠
Enable Input or N.C.
N.C. or Enable Input
Page 3 - 5
171 Covington Drive
Rev. A
٠
Bloomingdale, IL 60108
٠٠٠
Model 658
7x5mm Low Cost
LVCMOS, LVPECL or LVDS Clock
MECHANICAL SPECIFICATIONS
PACKAGE DRAWING
MARKING INFORMATION
(7.0 ±0.2)
0.276 ±0.008
(1.4)
0.055
PIN 1 IDENTIFIER
CTS ** YYWW
658P3C3
● XXXMXXXX
1.
2.
3.
4.
(1.27)
0.050
(5.0 ±0.2)
0.197 ±0.008
(3.73)
0.147
4
5
6
3
2
1
NOTES
1. Termination pads (e4), barrier-plating is nickel
(Ni) with gold (Au) flash plate.
2. Reflow conditions per JEDEC J-STD-020.
(2.54)
0.100
(5.08)
0.200
(2.0)
MAX
0.079
** - Manufacturing Site Code.
YYWW – Date code, YY – year, WW – week.
Truncated CTS part number.
XXXMXXXX - Frequency marked with 4
significant digits after the ‘M’.
Key:
(mm)
Inch
SUGGESTED SOLDER PAD GEOMETRY
SUGGESTED REFLOW PROFILE
.071 [1.80]
300
Maximum 260°C, 10 seconds
C BYPASS
5
6
Typical 245°C
4
200
.165 [4.20]
Temp.
(°C)
130°C
100
.079 [2.00]
2
1
3
.100 [2.54]
.200 [5.08]
0
0
[mm]
Key:
Inch
30
٠ ٠ ٠ CTS Electronic Components, Inc. ٠
90
120
150
180
210
240
270
300
Time (Seconds)
CBYPASS should be ≥ 0.01 uF.
Document No. 008-0316-0
60
Page 4 - 5
171 Covington Drive
Rev. A
٠
Bloomingdale, IL 60108
٠٠٠
Model 658
7x5mm Low Cost
LVCMOS, LVPECL or LVDS Clock
TAPE AND REEL INFORMATION
DIMENSIONS IN MILLIMETERS
17.5
2.0
Ø13
4.0
8.0
Ø1.50
1.75
2.40
2.10
120°
16.0
8.40
7.90
Ø60
5.70
5.40
Ø180
Ø23
DIRECTION OF FEED
Device quantity is 1,000 pieces per 180mm reel.
ENVIRONMENTAL SPECIFICATIONS
Temperature Cycle:
400 cycles from –55°C to +125°C, 10 minute dwell at each temperature, 1
minute transfer time between temperatures.
Mechanical Shock:
1,500g’s, 0.5mS duration, ½ sinewave, 3 shocks each direction along 3
mutually perpendicular planes (18 total shocks).
Sinusoidal Vibration:
0.06 inches double amplitude, 10 to 55 Hz and 20g’s, 55 to 2,000 Hz, 3 cycles
each in 3 mutually perpendicular planes (9 times total).
Gross Leak:
No leak shall appear while immersed in an FC40 or equivalent liquid at
+125°C for 20 seconds.
Fine Leak:
Mass spectrometer leak rates less than 2x10-8 ATM cc/sec air equivalent.
Resistance to Solder Heat:
Product must survive 3 reflows of +260°C peak, 10 seconds maximum.
High Temperature Operating Bias:
2,000 hours at +125°C, maximum bias, disregarding frequency shift.
Frequency Aging:
1,000 hours at +85°C, full bias, less than ±5 ppm shift.
Moisture Sensitivity Level:
Level 1 per JEDEC J-STD-020.
QUALITY AND RELIABILITY
Quality systems meet or exceed the requirements of ISO 9000:2000 standards.
Document No. 008-0316-0
٠ ٠ ٠ CTS Electronic Components, Inc. ٠
Page 5 - 5
171 Covington Drive
Rev. A
٠
Bloomingdale, IL 60108
٠٠٠
Similar pages