KFF7118A 2600MHz Duplexer Preliminary A – Origin Date: December 13, 2010 – Revision Date: December 13, 2010 Features • Low loss • Flat Low Ripple Description Surface mount, silver (Ag) coated ceramic duplexer. Developed for use in DCS infrastructure applications. Weight: 3.0 grams typical Material: Filter is composed of a ceramic block plated with Ag and a shield made of nickel silver plated steel. Filter complies with RoHS standards. Electrical Specifications Parameter Low Band Response Passband Iloss Passband Return Loss @ Ant Passband Return Loss @ Port 2 Passband Ripple Attenuation High Band Response Passband Iloss Passband Return Loss @ Ant Passband Return Loss @ Port 3 Passband Ripple Attenuation Isolation Rejection @ Low Band Rejection @ High Band Power into any port Frequency (MHz) 2500-2570 2500-2570 2500-2570 2500-2570 2620-2690 Typical @ 25ºC 2.0 dB 14 dB 14 dB 1.1 dB 47.0 dB Spec. @ 25ºC 2.8 dB max 12.0 dB min 12.0 dB min 1.5 dB max 45.0 dB min Spec. Over -40ºC to +85ºC 3 dB max 12.0 dB min 12.0 dB min 1.5 dB max 45.0 dB min 2620-2690 2620-2690 2620-2690 2620-2690 2500-2570 2.0 dB 14 dB 14 dB 1.1 dB 50 dB 2.8 dB max 12.0 dB min 12.0 dB min 1.5 dB max 45 dB min 3 dB max 12.0 dB min 12.0 dB min 1.5 dB max 45 dB min 2500-2570 2620-2690 50 dB 47 dB 45 dB min 45 dB min 2 Watts max 45 dB min 45 dB min Note: Supplier shall test each filter to the critical electrical specifications of the above table. Any subsequent audits may deviate from in value due to measurement repeatability among different test systems. Such deviations shall not exceed the following limits: Specification Allowance Insertion Loss 0.1 dB Return Loss 1.0 dB Stopbands 1.0 dB •“This product is covered by one or more of the following U.S. and foreign patents including: US 4,692,726;US 4,742,562; US 4,800,348;US 4,829,274;US 5,146,193;EP 0573597;DE 0573597;FR 0573597;JP 508149/92;KR 142171;US 5,162,760;US 5,218,329;US 5,250,916;US 5,327,109;US 5,488,335;CA 2114029;FR 9306297;GB 2273393;JP 3205337;KR 115113;CN 93106228.4;US 5,512,866;EP 0706719;DE 0706719;FR 0706719;GB 0706719;CN 95190359.4;US 5,602,518;US 5,721,520;US 5,745,018;EP 0910875;DE 0910875;DK 0910875;FR 0910875;GB 0910875;IE 0910875;JP 505182/98;KR 10-323013;US 5,994,978;US 6,462,629;CN 00810420.4;US 6,559,735;US 6,650,202;US 6,834,429.Other US and foreign patents pending. •CTS Corporation 2006 reserves all copyrights in the layout, design and configuration of the patterns on this product.” Document No. 008-0256-0 Page 1 of 2 Rev. X4VH - CTS Electronic Components - www.ctscorp.com - 4800 Alameda Blvd NE, Albuquerque, NM 87114 - KFF7118A 2600MHz Duplexer Preliminary A – Origin Date: December 13, 2010 – Revision Date: December 13, 2010 Mechanical Drawing Dimension Nominal (mm) 2535 A B C D E F G H I J K M 2655 Electrical response 2300 0 2400 2500 2600 2700 24.04 4.11 1.02 0.79 0.79 10.16 13.88 4.60 0.89 5.22 7.44 10.52 Tolerance (mm) +/- 0.27 max 0.13 0.13 0.13 0.13 0.13 max 0.13 max 0.13 0.13 PCB Layout 2800 2900 -10 -20 2655 ANT 2535 -30 -40 -50 -60 -70 -80 DIMENSION REEL DIAMETER REEL WEIGHT REEL QUANTITY UNITS SPECIFICATION 330 mm 2.3 kg 500 ea. Customer Feed Direction Product Marking CTS 118 YWW Document No. 008-0256-0 Wo Ao Bo Ko Po Inches/mm Inches/mm Inches/mm Inches/mm Inches/mm 1.732/44.0 0.216/5.5 .13/28.7 0.204/5.18 0.472/12.00 Page 2 of 2 Rev. X4VH - CTS Electronic Components - www.ctscorp.com - 4800 Alameda Blvd NE, Albuquerque, NM 87114 -