Model 150 Stratum 3, 9x14 mm OCXO Features 10 to 50 MHz Frequency Range Compliant to Stratum 3 of GR-1244-CORE Surface Mount 3.3V or 5.0V operation Low Jitter/Phase Noise Tape and Reel Packaging Applications Telecom Switching Wireless Communication Timing over Packet Part Dimensions: 9.7 × 14.9 x 7.0 mm Description The CTS Model 150 is a low cost, small size, high performance OCXO. The high quality AT Quartz Crystal used in this OCXO offers high stability and low jitter/phase noise, making it the ideal choice for any telecommunications system. Ordering Information – Table 1 Model Temp Range Stability* Supply Voltage Electronic Freq Control Frequency Code 150 B R E N 20M000 Code Temp range Code Supply A B C D G 0 to 50°C 0 to 70°C -10 to 60°C -20 to 70°C -40 to 85°C D E 5.0V ±5% 3.3V ±5% Code Stability N P R* ±250 ppb ±200 ppb ±100 ppb * Choose stability option R for full GR-1244-CORE, Stratum 3 holdover and wander generation performance. Model 150 Rev. B_062016 Code 20M000 XXMXXX Code Spec V N EFC No EFC Part Number Example: 150BREN20M000 Frequency (MHz) 20.000 XX.XXX Standard Frequencies (MHz) 10.000 12.800 19.200 20.000 24.576 25.000 49.152 Page 1 of 5 ©2015 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Model 150 Stratum 3, 9x14 mm OCXO Electrical Specifications Parameter Conditions & Remarks Min Typical Max Unit -40 3.135 4.75 3.3 5.0 85 3.465 5.25 °C - 0.7 2.7 1 W 13.5 15 16.5 pF 10 - 50 MHz Operating Conditions Operating Temperature Range TOP Supply Voltage VCC: 3.3V or 5.0V Power Consumption Warm-up Steady State; TA = 25°C Load Vdc Frequency Stability Frequency FNOM Initial Frequency Tolerance Freq. vs Temperature (See options - Table 1) Freq. vs Supply Voltage @25°C, at time of shipment - - ±0.5 ppm -40°C to 85°C (ref to +25C) - - ±100 ppb VCC ±5% - - ±50 ppb Freq. vs Load 15 pf ±5% - - ±50 ppb Freq. vs Time (Aging ) After 30 days of operation - ±2 ±300 ±3 - ppb/day ppb/year ppm/10 yrs Free run accuracy All causes – 10 years - - ±4.6 ppm Short Term Stability (ADEV) 1.0 sec 0.1 ppb @ 25°C, After 5 mins referenced to the freq after 1 ±500 ppb hour on - Constant temperature ±10 ppb - Over Ambient temperature 200 ppb, pk-pk (See options - Table 1) Meets Stratum 3 MTIE and TDEV requirements per Telcordia GR-1244-CORE (See Table 1) Warm-up time Holdover Stability (24 hours) Wander Generation Output Parameters CMOS Output Levels 3.3V (LVCMOS) 5.0V (HCMOS) VOL VOH 2.4 3.0 - 0.4 0.4 - Vdc Rise/Fall Times 10% to 90%, 15pf load - - 5 ns Duty Cycle @50% of output signal 45 50 55 % - -70 -100 -125 -142 -148 -151 - dBc/Hz Phase Noise (Typical for 25.0 MHz) Model 150 Rev. B_062016 1 Hz 10 Hz 100 Hz 1 kHz 10 kHz 100 kHz Page 2 of 5 ©2015 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Model 150 Stratum 3, 9x14 mm OCXO Electrical Specifications (Continued) Parameter Conditions & Remarks Min Typical Max Unit 0.0 0.0 ±5.0 1.65 2.5 - 3.3 5.0 - - - - 100 - - Kohms - - 10 % Electronic Frequency Control - EFC (Optional) EFC Control Voltage VC 3.3V 5.0V Frequency Adjust Range Slope Positive, monotonic Input Impedance ZIN Linearity Volts ppm Typical Stratum 3 Wander Generation performance per Telcordia GR-1244-CORE (locked through a 0.1Hz loop bandwidth) Model 150 Rev. B_062016 Page 3 of 5 ©2015 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Model 150 Stratum 3, 9x14 mm OCXO Mechanical and Environmental Storage Temperature Range -55°C to +105°C Operating Temperature Range -40°C to +85°C Per IPC/JEDEC J-STD-020D; >217°C, 1.5min and 245°C (Absolute max temperature), 10 secs. Note: This product is not designed to be reflowed in an inverted position. Reflow Profile Mechanical Shock 100g, 6ms, 1/2 sinewave, 3 shocks each direction along 3 mutually perpendicular planes. Drop 10 cm height, 3 times onto hard board with thickness of 3 cm. - IEC60028-2-32 test Ed. Bumping 40g, 6mS, 4000 ±10 times in each of three mutually perpendicular axes Random: Frequency range: 1Hz‐4Hz‐100Hz‐200Hz Acceleration: 0.0001g²/Hz ‐ 0.01g²/Hz ‐ 0.01g²/Hz ‐ 0.001g²/Hz Grms=1.15g. Duration: 30 minutes (per axis) Sine: 10 - 55 Hz, 0.75mm DA, Sweep time 30 minutes per axis Mechanical Vibration Thermal Shock -40°C ~ +85°C. 0.5 hour dwells with <30 second transitions. 100 cycles RoHS Lead Free, and fully compliant to RoHS Directive 2011/65/EU MSL Level 2 Mechanical Specifications Pad termination finish: Gold flash < 10 µ inch, over Ni plated Cu Dimension (mm) CTS** 150XXXX XXMXXX YYWWXXXXX Model 150 Rev. B_062016 Symbol Min Max A - 14.9 B - 9.7 C - 7.0 D 0.9 1.1 E 1.6 1.8 F 0.9 1.1 G 2.54 nominal H 2.54 nominal Pad Connection 1 Vc or N/C 2 N/C 3 Ground 4 Output 5 N/C 6 Vcc Recommended Solder Pad Geometry Marking Key ** YYWWXXXXX Mfg site code Serial Number (mfg date code = first 4 digits) Page 4 of 5 ©2015 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Model 150 Stratum 3, 9x14 mm OCXO Solder Reflow Ts max to TL(Ramp-up Rate) Preheat Temperature Min (Ts min) Temperature typ (Ts) Temperature max (Ts max) Time (tS) Ramp-up Rate (TL to TP) Time maintained above: --Temperature (TL) --Time (tL) 3°C/s max 150°C 175°C 200°C 60-120 seconds 3°C/s max 217°C 90 seconds max 245°C max for 10 Peak Temperature seconds Time within 5°C of peak (tP) 20 seconds Ramp-down Rate 6°C/s max Time 25°C to Peak Temp (t) 8 minutes max Note: Temperatures represent device body temperature. Packing: Tape and Reel Model 150 Rev. B_062016 Page 5 of 5 ©2015 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.