Data Sheet

PCI & PCIX Network
Technical Data Sheet
RoHS Compliant Parts Available
Description
Features
This system bus bias network is designed to provide high
performance resistor bias termination for single ended
parallel busses.
•
•
8 or 16 Bit Network
Compliant to PCI and PCIX
Ultra Low Channel Capacitance
Laser Trimmed Resistance to 1% Tolerance
Slim BGA Package
RoHS Compliant Designs Available
•
Compatible with both lead and lead free
processes
•
•
•
•
Designed with a ceramic substrate, this device minimizes
channel capacitance, a primary cause of reduced system
performance. In addition, the BGA package eases routing
design, saving the designer many hours of printed circuit
layout.
The BGA packaging has been proven to reduce rework and
improve reliability.
Style F
8 Bits
16 Bits
3
3
2
2
1
1
A
B
C
A
D
Electrical Specifications
B
C
D
E
F
G
H
Typical Application
VTT
Resistor Tolerance:
TCR
Operating Temperature Range
Maximum Resistor Power:
Maximum Package Power:
Process Requirements:
Maximum Temperature
± 1.0%
±200ppm/°C
-55°C to +125°C
0.05 Watts at 70°C
1.0 Watts at 70°C
RT24 17
Chip Set
Per IPC/JEDEC J-STD-020C
VTT
Ordering Information
1.00mm Pitch
Standard Part
No.
RT1415B7
RT1416B7
RT1417B7
RT1418B7
1.27mm Pitch
Standard Part
No.
RT1415B6
RT1416B6
RT1417B6
RT1418B6
Packaging Information
Style
8 Bits
8 Bits
16 Bits
16 Bits
RΩ
4.7K
8.2K
4.7K
8.2K
Array
Size
3x4
3x4
3x8
3x8
1.00mm Pitch
RoHS Part
No.
RT2415B7
RT2416B7
RT2417B7
RT2418B7
1.27mm Pitch
RoHS Part
No.
RT2415B6
RT2416B6
RT2417B6
RT2418B6
Suffix
Tape Width
Carrier Pitch
Reel Diameter
Parts/Reel
TR7
TR13
24 mm
8 mm
7 inch
1,000
24mm
8 mm
13 inch
4,000
Part Number Coding
7 inch reel, Add TR7 to part
number, example RT2415B7TR7
13 inch reel, Add TR13 to part
number, example RT2415B7TR13
(Bulk packaging is not available)
Direction of Fee d
CTS Electronic Components
www.ctscorp.com
© 2006 CTS Corporation. All rights reserved. Information subject to change.
Page 1
PCI & PCIX Terminators
March 06
Recommended Land Pattern
BGA Routing Scheme
Outline of Substrate
VTT Island
.005 Inch
Wide Traces
Solder Mask Dia = Pad
Diameter +.15mm(.006 inch)
PCB Pad Diameter
1.00mm Pitch (B7) = 0.51mm/.020 inch (minimum)
1.27mm pitch (B6) = 0.64mm/.025 inch (minimum)
For .006" Thick Solder Paste Stencil, Aperture Opening Should
be Equal to the PCB Pad Diameter.
Refer to www.ctscorp.com/components/clearone.asp for
additional PCB design information
Mechanical Diagram
L
W
H
RT_4__B_
CTS YRWK
P (Pitch)
A1 Identifier
K
1.27 mm Pitch
RT1415B6
RT1416B6
RT1417B6
RT1418B6
RT2415B6
RT2416B6
RT2417B6
RT2418B6
D
L
W
H
P
D
K
8 Bit
mm
inch
5.08±0.15
.200±.006
3.81±0.15
.150±.006
1.32±0.15
.052±.006
1.27±0.25
.050±.010
0.76±0.05
.030±.002
0.64±0.25
.025±.010
16 Bit
mm
inch
10.16±0.15
.400±.006
3.81±0.15
.150±.006
1.32±0.15
.052±.006
1.27±0.25
.050±.010
0.76±0.05
.030±.002
0.64±0.25
.025±.010
1.00 mm Pitch
RT1415B7
RT1416B7
RT1417B7
RT1418B7
RT2415B7
RT2416B7
RT2417B7
RT2418B7
P (Pitch)
L
W
H
P
D
K
8 Bit
mm
inch
4.00±0.15
.157±.006
3.00±0.15
.118±.006
1.19±0.15
.047±.006
1.00±0.25
.039±.010
0.64±0.05
.025±.002
0.50±0.25
.020±.010
16 Bit
mm
inch
8.00±0.15
.315±.006
3.00±0.15
.118±.006
1.19±0.15
.047±.006
1.00±0.25
.039±.010
0.64±0.05
.025±.002
0.50±0.25
.020±.010
Complete ClearONE Product, Processing, and Application Information can be found at the following link:
http://www.ctscorp.com/components/clearone.asp
CTS Electronic Components
www.ctscorp.com
© 2006 CTS Corporation. All rights reserved. Information subject to change.
Page 2
PCI & PCIX Terminators
March 06
Similar pages