VFVX100 VCXO Low Noise to 1.0GHz 9x14mm SMD, PECL/LVPECL RoHS Status Features ¾ ¾ ¾ ¾ 200MHz to 1.0 GHz Frequency Range Ultra Low Jitter and Phase Noise Absolute Pull Range of ± 20ppm* KVCO = 35 ppm/V Applications ¾ ¾ ¾ ¾ Universal Edge QAM Optical Networking, SONET / SDH 10 Gigabit Ethernet Broadband Access * Wider APR available – Consult factory Replacement for Valpey Fisher Part Number: VFT5V Electrical Specifications Parameter Frequency Range Frequency Stability Operating Temperature Range Output Supply Voltage Voltage Control Input Impedance KVCO APR Deviation slope Linearity Modulation BW Symbol Condition Min F ∆F/F Typ 200 Vs. Operating Temp. B: 0°C to +70°C C: -10°C to +60°C G: -40°C to +85°C ± 10 ± 12 ± 18 Vs. Supply Voltage Vs. Aging / Year ±3 ±1 0° -10° -40° T Signal 4.75 3.15 0 0 Vcc Vc 5.00 3.30 Max Unit 1,000 MHz ± 20 ± 25 ± 30 ppm ppm/V ppm +70° +60° °C +85° PECL / LVPECL 5.25 V 3.45 5 V 3.3 Note First Year Order Code B Order Code C Order Code G Order D Order E Vcc = 5V Vcc = 3.3V >50KΩ Fm < 10Khz 35 ppm/V ± 20 ppm Monotonic positive -10 10 +10 % KHz 3dB BW 75 South Street, Hopkinton, MA 01748 • 800-982-5737 • 508-497-6377 • FAX 508-435-5289 • www.valpeyfisher.com • RevF0409 1 VFVX100 VCXO Low Noise to 1.0GHz 9x14mm SMD, PECL/LVPECL Electrical Specifications Parameter Supply Current Symbol Condition Icc 50 Ohm Load Typ @ 50% Duty Cycle Tr/Tf 45 50 20% to 80% Unit 75 mA 55 % 0.6 ns Voh Vcc-0.96 Vcc-0.81 V Vol Vcc-1.85 Vcc-1.65 V 2 10 ms 0.2 0.5 ps Start up time 12KHz to 20MHz 100Hz 1KHz 10KHz 100KHz Jitter (RMS) SSB Phase Noise -93 -118 -142 -145 -50 Subharmonics Enable / Disable Function Enable / Disable Time Max Note 50 Ohm to Vcc-2V or Thevenin Equivalent Bias Required Load Rise / Fall Time Logic “1” Level Logic “0” Level Min dBc/Hz -40 @ 622.08MHz dBc Input HIGH (>2.5V): DISABLED Input LOW (<0.5V) or floating: ACTIVE Te/Td 100 ns How to Order — VFVX100 — Temperature Range Code Specification B 0°C to 70°C C -10°C to 60°C G -40°C to 85°C FREQUENCY, MHz Supply Voltage Code Specification D 5V ±5% E 3.3V ±5% 75 South Street, Hopkinton, MA 01748 • 800-982-5737 • 508-497-6377 • FAX 508-435-5289 • www.valpeyfisher.com • RevF0409 2 VFVX100 VCXO Low Noise to 1.0GHz 9x14mm SMD, PECL/LVPECL Absolute Maximum Ratings Parameter Supply Break Down Voltage Storage Temperature Control Voltage Symbol Condition Min Typ Max Unit Vcc -0.5 6.0 V Ts -55 +85 °C Vc -1 7 V Note Environmental and Mechanical Parameter Mechanical Shock Thermal Shock Specification Per MIL-STD-202, Method 213, Condition E Per MIL-STD-883, Method 1011, Condition A Vibration Per MIL-STD-883, Method 2007, Condition A Soldering Conditions 260°C for 10s max Leak rate less than 5x10-8 atm.cc/s of helium (crystal only) Hermetic Seal Vcc = 3.3V 127 Ω 127 Ω 6 1 2 Enable/Disable 5 Output 4 Output 3 82 Ω 82 Ω GND Pin # 1 Connection Vc 2 3 4 Enable Case, GND Output 5 6 Output Vcc 75 South Street, Hopkinton, MA 01748 • 800-982-5737 • 508-497-6377 • FAX 508-435-5289 • www.valpeyfisher.com • RevF0409 3