Data Sheet

®
Electrocomponents
Series 193 Data Sheet
Side Actuated DIP Switch
Side Actuated,
Surface Mount
DIP Switches
Features
Optimized Mechanical Features
• Coplanarity: 0.1mm/.004" maximum
• Enclosed actuators shield contacts from foreign
particles throughout life of switch
• Gull-wing terminal configuration
• Compatible with SMT assembly including IR and
Vapor-phase (up to 260°C)
• SPST configuration,2 through 10 positions
Optimized Contact System
• Contact wiping action on make and break
• Integral terminal and contact locked into high temperature
plastic base
• Lock-over-center design provides positive detent action
• Optimized, active contact design incorporating
dimple-to-flat surface wiping interface with high
contact force
Materials
• Gold plated contacts for long-term contact corrosion
resistance
• Tin plated terminals for better solderability
• UL 94V-0 plastics
• RoHS compliant
Electrical and Mechanical Specifications
Switch Function
SPST-2 through 10 positions
Switch Contact Resistance
50 milliohms maximum initial
100 milliohms maximum at end of life
Insulation Resistance
1,000 megohms minimum between insulated terminals
Dielectric Strength
500 VAC for 1 minute between adjacent
switches
Nonswitching Rating
100 mA or 50 VDC maximum
Switch Capacitance
5.0 pF maximum between adjacent closed switches
Operating Temperature
–40°C to +85°C
1-2
CTS Electrocomponents
Actuation Life
7,000 cycles switching 50 mA @ 24 VDC
Coplanarity
Coplanarity of 0.1mm / .004" max
Allowable Solder Time
Up to 60 seconds at 260°C
Vibration
Per MIL-STD-202F, method 204D, condition B
(.06" or 15G’S between 10 HZ to 2K HZ) with no
contact inconsistencies greater than 1 microsecond
Shock
Per MIL-STD-202F, method 213B, condition A
(50G’S) with no contact inconsistencies greater
than 1 microsecond
Sealing
Bottom epoxy seal standard
Marking
Special side or top marking available-consult CTS
Packaging
Standard : Anti-static tube packaging
Optional : Tape and reel packaging
© 2014 CTS Corporation. All rights reserved. Information subject to change.
7/21/14
www.ctscorp.com
CTS SERIES 193
9.00±0.25
.354±.010
Surface Mount Pad Layouts
9.78±0.25
.385±.010
REF
1.14
.045
1.52
.060
2.44
.096
6.17
.243
8.60
.339
11.04
.435
±0.25
"A" ± .010
2.54
TYP.
.100
1.13 TYP.
.044
DATE CODE LOCATION
7.90
.311
O1 2
N
CTS
3
4
8
9 10
1.02±0.13
.040±.005
REF
0.38
.015
STAND OFF
9.12±0.25
.359±.010
0.48±0.08 TYP.
.019±.003
2.54 TYP.
.100
+0.38
7.62 -0.13
.300 +.015
-.005
CL
10.40 +0
-0.30
PART NO.
.410 +0
-0.012
DATE CODE LOCATION
DIMENSION:
"A"
Overall
Dimensions
No. of
Switch
Positions Part Number
7.26 / .286
2
193–2MS
9.80 / .386
3
193–3MS
12.34 / .486
4
193–4MS
14.88 / .586
5
193–5MS
17.42 / .686
6
193–6MS
19.96 / .786
7
193–7MS
22.50 / .886
8
193–8MS
25.04 / .986
9
193–9MS
27.58 / 1.086
10
193–10MS
2-2
CTS Electro components
mm
inch
Ordering Information
193
–
10
M
S
R
N
XX: # OF POSITIONS
M: MEDIUM LENGTH ACTUATOR
(1.14mm/.045")
S: BOTTOM EPOXY SEAL
BLANK: ANTI-STATIC TUBE PACKAGING
*R: TAPE AND REEL PACKAGING
*Not available for 7 position
BLANK: SHIP AT OFF POSITION
N:
SHIP AT ON POSITION
Note:
Consult CTS for other common standard features
not listed.
© 2014 CTS Corporation. All rights reserved. Information subject to change.
7/21/14
www.ctscorp.com
Similar pages