Industrial Ethernet WLAN module Industrial Wireless - Access point/bridge/client 52.85 mm [2.08 in] 135 mm [5.31 in] 151,85 mm [5.98 in] 97 mm [3.82 in] •IEEE 802.11a/b/g compatible single radio module (2.4 GHz or 5 GHz band) •Power input by redundant 24 V DC power inputs or Power-over-Ethernet •Multi-SSID and VLAN support •Turbo Roaming for seamless wireless connections •Integrated DI/DO for on-site monitoring and warning •QoS (WMM) support % 105 mm [4.13 in] Technical data WLAN Interface Standards IEEE 802.11a/b/g for Wireless LAN IEEE 802.11i for Wireless Security IEEE 802.3u for 10/100BaseT(X) IEEE 802.3af for Power-over-Ethernet IEEE 802.1D for Spanning Tree Protocol IEEE 802.1w for Rapid STP IEEE 802.1Q VLAN Spread Spectrum and Modulation (typical) • DSSS with DBPSK, DQPSK, CCK • OFDM with BPSK, QPSK, 16QAM, 64QAM • 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps,DBPSK @ 11 Mbps • 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps, QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps Operating Channels (central frequency) US: 2 .412 to 2.462 GHz (11 channels) 5.18 to 5.24 GHz (4 channels) EU: 2 .412 to 2.472 GHz (13 channels) 5.18 to 5.24 GHz (4 channels) Security • SSID broadcast enable/disable •F irewall for MAC/IP/Protocol/Port-based filtering •6 4-bit and 128-bit WEP encryption, Transmission Rates TX Transmit Power RX Sensitivity WPA /WPA2-Personal and Enterprise (IEEE 802.1X/RADIUS, TKIP and AES) 802.11b: 1, 2, 5.5, 11 Mbps 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11b: Typ. 23±1.5 dBm @ 1 to 11 Mbps 802.11g: T yp. 20±1.5 dBm @ 6 to 24 Mbps, Typ. 19±1.5 dBm @ 36 Mbps, Typ. 18±1.5 dBm @ 48 Mbps, Typ. 17±1.5 dBm @ 54 Mbps 802.11a: T yp. 18±1.5 dBm @ 6 to 24 Mbps, Typ. 16±1.5 dBm @ 36 to 48 Mbps, Typ. 15±1.5 dBm @ 54 Mbps 802.11b: -97 dBm @ 1 Mbps, -94 dBm @ 2 Mbps, -92 dBm @ 5.5 Mbps, -90 dBm @ 11 Mbps 802.11g: -93 dBm @ 6 Mbps, -91 dBm @ 9 Mbps, -90 dBm @ 12 Mbps, -88 dBm @ 18 Mbps, -84 dBm @ 24 Mbps, -80 dBm @ 36 Mbps, -76 dBm @ 48 Mbps, -74 dBm @ 54 Mbps 802.11a: -90 dBm @ 6 Mbps, -89 dBm @ 9 Mbps, -89 dBm @ 12 Mbps, -85 dBm @ 18 Mbps, -83 dBm @ 24 Mbps, -79 dBm @ 36 Mbps, -75 dBm @ 48 Mbps, -74 dBm @ 54 Mbps Protocol Support General Protocols: AP-only Protocols: Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, PPPoE, DHCP ARP, BOOTP, DHCP, dynamic VLAN-Tags for 802.1X-Clients, STP/RSTP (IEEE 802.1D/w) \T Interface Default Antenna 2 dBi dual-band omni-directional antenna, RP-SMA (male) RP-SMA (female) 10/100BaseT(X), auto negotiation speed (RJ45-type) RS-232 (RJ45-type) PWR1, PWR2, PoE, FAULT, STATE, signal strength, CLIENT MODE, BRIDGE MODE, WLAN, 10M, 100M Connector for External Antennas LAN Port Console Port LED Indicators Alarm Contact 1 relay output with current carrying capacity of 1 A @ 24 V DC 2 electrically isolated inputs • +13 to +30 V for state “1” • +3 to -30 V for state “0” • Max. input current: 8 mA Digital Inputs Physical Characteristics Housing Weight Dimensions Installation Environmental Limits Operating Temperature Metal, IP30 protection 850 g 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in) DIN-Rail mounting Standard Models: 0 to 60 °C (32 to 140 °F) Wide Temp. Models: -40 to 75 °C (-40 to 167 °F) -40 to 85 °C (-40 to 185 °F) 5% to 95% (non-condensing) Storage Temperature Ambient Relative Humidity Power Requirements Input Voltage 12 to 48 V DC, redundant dual DC power inputs or 48 V DC Power-over-Ethernet (IEEE 802.3af compliant) 10-pin removable terminal block • 0.121 to 0.494 A @ 12 to 48 V DC • 0.3 A @ 24 V DC Present Connector Power Consumption Reverse Polarity Protection Regulatory Approvals Safety Radio EMC EN60950-1, UL60950-1 EN300 328, EN301 893, EN301 489-1/-17, FCC Part 15 Subpart B Class B, EN55022/55024 UL/cUL Class I, Div. 2; ATEX Class I, Zone 2 392.209 hrs Hazardous Location MTBF Warrenty Warranty Period 5 years Ordering Information Models Type IEEE 802.11a/b/g Wireless AP/ Bridge/Client (European version) Operating Order No. Temperature IE-WL-AP-BR-CL-ABG-EU 0 to +60 °C 1242100000 IE-WLT-AP-BR-CL-ABG-EU -40 to +75 °C 1286480000 IEEE 802.11a/b/g Wireless AP/ Bridge/Client (US version) IE-WL-AP-BR-CL-ABG-US 0 to +60 °C IE-WLT-AP-BR-CL-ABG-US -40 to +75 °C 1242110000 1286490000 Type EBR-Modul RS232 Order No. RM-KIT 1241440000 Accessories External Backup and Restore Module 19" Rack Mounting Kit 20 1241430000 Unmanaged Power-over-Ethernet Switches – Basic Line 6-port IEEE 802.3af/at PoE+ unmanaged Ethernet Switch • 4 IEEE 802.3af/at compliant PoE and Ethernet combo ports • Up to 30 watts per PoE port • 24/48 V DC redundant wide-range power supply •Integrated DC/DC converter can supply 48V-PoE devices across the entire input voltage range of 24 to 48 V DC • Intelligent power consumption detection and classification • Redundant dual V DC power inputs • Broadcast Storm Protection 78.8 mm (3.1 in) 50.3 mm (2.0 in) 4 2 5 70.0 mm (2.8 in) 115.0 mm (4.5 in) PoE 3 1 \% IE-SW-BL-4PoE-Series Technical data Technology Standards Processing Type Flow Control Interface RJ45 Ports LED Indicators Power Requirements Input Voltage Input Current Overload Current Protection Connection Reverse Polarity Protection Physical Characteristics Housing Dimensions Weight Installation Environmental Limits Operating Temperature Storage Temperature Ambient Relative Humidity Regulatory Approvals Safety EMI EMS Shock Freefall Vibration Warranty Warranty Period 16 IEEE 802.3at for Power-over-Ethernet IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) IEEE 802.3x for Flow Control Store and Forward IEEE 802.3x flow control, back pressure flow control 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode and auto MDI/MDI-X connection PWR1, PWR2, 10/100M, PoE 24/48 (20 to 60 V) V DC Max 7.5 A @ 24 V DC (supports up to 4 ports at 30 watts per PoE port) Present 1 removable 4-contact terminal block Present Metal, IP30 protection 50 × 115 × 70 mm (1.96 x 4.52 x 2.76 in) 375 g DIN-Rail mounting, wall mounting (with optional kit) Standard Models: 0 to 60 °C (32 to 140 °F) Wide Temp. Models: -40 to 75 °C (-40 to 167 °F) -40 to 85 °C (-40 to 185 °F) 5 to 95 % (non-condensing) UL508 FCC Part 15, CISPR (EN55022) class A EN61000-4-2 (ESD), level 3; EN61000-4-3 (RS), level 3; EN61000-4-4 (EFT), level 4; EN61000-4-5 (Surge), level 4; EN61000-4-6 (CS), level 3; EN61000-4-8 IEC 60068-2-27 IEC 60068-2-32 IEC 60068-2-6 5 years Ordering Information Port Variants Type 2 * RJ45 10/100 BaseT(X), 4 * RJ45 10/100 BaseT(X) PoE+ IE-SW-BL06-2TX-4POE IE-SW-BL06T-2TX-4POE Operating Temperature 0 to 60 °C -40 to +75 °C Order No. 1241380000 1286920000 Models with Fiber optic ports on request Accessories 19" Rack Mounting Kit Type RM-KIT Order No. 1241440000 Managed Power-over-Ethernet Switches – Premium Line 6-port IEEE 802.3af/at PoE+ managed Ethernet Switch • 4 IEEE 802.3af/at compliant PoE and Ethernet combo ports • Up to 30 watts per PoE port • 24/48 V DC redundant wide-range power supply •Integrated DC/DC converter can supply 48 V-PoE devices across the entire input voltage range of 24 to 48 V DC •Extended PoE management functions, including PoE error checking or configuring the operational times of connected PoE devices IE-SW-PLM-PoE-Serie 135 mm (5.31 in) 9.75 mm (0.38 in) 131.5 mm (5.18 in) % 80.05 mm (3.15 in) Technical data Standards IEEE 802.3at/af for Power-over-Ethernet IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT (X) and 100BaseFX IEEE 802.3x for Flow Control IEEE 802.1D for Spanning Tree Protocol IEEE 802.1w for Rapid STP IEEE 802.1Q for VLAN Tagging IEEE 802.1p for Class of Service IEEE 802.1X for Authentication IEEE 802.3ad for Port Trunk with LACP Protocols IGMPv1/v2 GMRP GVRP SNMPv1/v2c/v3 DHCP Server/Client DHCP Option 66/67/82 BootP TFTP SNTP SMTP RARP RMON HTTP HTTPS Telnet SSH Syslog Modbus/TCP SNMP Inform LLDP IEEE 1588 PTP IPv6 MIB MIB-II Ethernet-Like MIB P-BRIDGE MIB Q-BRIDGE MIB Bridge MIB RSTP MIB RMON MIB Group 1, 2, 3, 9 Flow Control IEEE 802.3x flow control back pressure flow control Switch Properties Priority Queues 4 Max. Number of Available VLANs 64 VLAN ID Range VID 1 to 4094 IGMP Groups 256 MAC Table Size 8K Packet Buffer Size 1 Mbit Interface 10/100BaseT(X) auto negotiation speed, Full/Half RJ45 Ports duplex mode, and auto MDI/MDI-X connection Console Port RS-232 (RJ45 connector) DIP Switches Turbo Ring, Master, Coupler, Reserve LED Indicators PWR1, PWR2, FAULT, 10/100M, MSTR/HEAD, CPLR/TAIL, PoE Alarm Contact 2 relay outputs with current carrying capacity of 1 A @ 24 V DC Digital Inputs 2 inputs with the same ground, electrically isolated • +13 to +30 V for state “1” • -30 to +3 V for state “0” • Max. input current: 8 mA Environmental Limits Operating Temperature Standard Models: 0 to 60 °C (32 to 140 °F) Wide Operating Temp. Models: -40 to 75 °C (-40 to 167 °F) -40 to 85 °C (-40 to 185 °F) 5 to 95 % (non-condensing) Storage Temperature Ambient Relative Humidity Regulatory Approvals Safety EMI EMS UL508 (Pending) FCC Part 15, CISPR (EN55022) class A EN61000-4-2 (ESD), level 3; EN61000-4-3 (RS), level 3; EN61000-4-4 (EFT), level 3; EN61000-4-5 (Surge), level 3; EN61000-4-6 (CS), level 3; EN61000-4-8 IEC 60068-2-27 IEC 60068-2-32 IEC 60068-2-6 Shock Freefall Vibration Warranty Warranty Period 5 years Ordering Information Port Variants 2 * RJ45 10/100 BaseT(X), 4 * RJ45 10/100 BaseT(X) PoE+ Type Operating Temperature IE-SW-PL06M-2TX-4PoE 0 to 60 °C IE-SW-PL06MT-2TX-4PoE -40 to +75 °C Order No. 1241390000 1286910000 Models with Fiber optic ports on request Accessories External Backup and Restore Module 19“ Rack Mounting Kit Type EBR-Modul RS232 Order No. RM-KIT 1241440000 1241430000 Power Requirements Input Voltage Input Current Overload Current Protection Connection Reverse Polarity Protection Physical Characteristics Housing Dimensions Weight Installation 24/48 (20 to 60 V) V DC Max. 7.8 A @ 24 V DC (supports up to 4 ports at 30 watts per PoE port) Present 2 removable 6-contact terminal blocks Present Metal, IP30 protection 80 x 135 x 131.5 mm (3.15 x 5.31 x 5.18 in) 1270 g DIN-Rail mounting 17 Backup-/Restore module / RM-KIT External Backup and Restore Module for System Configuration Kit for 19"-rack mounting •Reduce system downtime by simple reconfiguration in case of replacing devices •Plug-n-Play system backup and restoration •Compact, rugged, reliable design •Supports all managed Ethernet switches and WLAN components •For mounting DIN-rail based devices in 19" racks % Technical data Technical data Basic Operation Connector Configuration Power Requirements Input Voltage RS232-Interface with RJ45-Connector Use the WEB-Console of managed Switches 3 to 5 V DC (through the RS-232 port’s RTS signal) Physical Characteristics Housing Dimensions Weight Mounting possibility Cable Length Environmental Limits Operating Temperature Storage Temperature Ambient Relative Humidity Regulatory Approvals EMI EMS PVC molding, IP40 protection 32.5 x 97 x 12 mm (8.07 x 3.82 x 0.47 in) 50 g M4 screw (< 4 mm) 35 cm (including connector) 0 to 60 °C (32 to 140 °F) -20 to 70 °C (-4 to 158 °F) 5 to 95 % (non-condensing) FCC Part 15, CISPR (EN55022) Class A EN61000-4-2 (ESD), level 2; EN61000-4-3 (RS), level 3; EN61000-4-4 (EFT), level 3; EN61000-4-5 (Surge), level 3; EN61000-4-6 (CS), level 3 Warranty Warranty Period 5 years Ordering Information Models Type Order No. External Backup and Restore Module EBR-Modul RS232 1241430000 22 Physical Characteristics Dimensions 481 x 177.8 x 202.4 mm Ordering Information Models Type Order No. 19" Rack Mounting Kit RM-KIT 1241440000