CMPAK-4; Tape reel SMD; standard product orientation 12NC ending 135

CM
PA
K
-4
SOT343R
CMPAK-4; Tape reel SMD; standard product orientation 12NC
ending 135
Rev. 1 — 13 November 2012
Packing information
1. Packing method
Printed plano box
Barcode label
Reel
Tape
Barcode label
Circular sprocket holes opposite the
label side of reel
QA Seal
Cover tape
Carrier tape
msc074
Fig 1.
Table 1.
Reel pack for SMD
Packing information
Package
version
12NC
ending
Reel dimensions
d x w (mm) [1]
SPQ/PQ
(pcs)
Reels
per box
Outer box dimensions
l x w x h (mm)
SOT343R
135
286 x 8
10000
1
293 x 293 x 18
[1]
d = reel diameter; w = tape width.
SOT343R
NXP Semiconductors
CMPAK-4; Tape reel SMD; standard product orientation 12NC ending 135
2. Product orientation
Standard product orientation SOT343R
direction of feed
Fig 2.
Product orientation in carrier tape
3. Carrier tape dimensions
4
W
K0
A0
B0
P1
mdb579
direction of feed
Fig 3.
Carrier tape dimensions
Table 2.
Carrier tape dimensions
In accordance with IEC 60286-3.
A0 (mm)
B0 (mm)
K0 (mm)
T (mm)
P1 (mm)
W (mm)
2.4
2.4
1.2
-
4.0
8
Limited warranty and liability
© NXP B.V. 2012.
Information in this document is believed to be accurate and reliable. However, NXP
Semiconductors does not give any representations or warranties, expressed or implied, as
to the accuracy or completeness of such information and shall have no liability for the
consequences of use of such information.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
Date of release: 13 November 2012
Document identifier: SOT343R_135
All rights reserved.
Similar pages