MURF1660CT Preferred Device SWITCHMODEt Power Rectifier These state-of-the-art devices are designed for use in switching power supplies, inverters and as free wheeling diodes. Features http://onsemi.com •Ultrafast 60 Nanosecond Recovery Times •150°C Operating Junction Temperature •Epoxy Meets UL 94 V-0 @ 0.125 in •High Temperature Glass Passivated Junction •Low Leakage Specified @ 150°C Case Temperature •Current Derating @ Both Case and Ambient Temperatures •Electrically Isolated. No Isolation Hardware Required. •Pb-Free Package is Available* ULTRAFAST RECTIFIER 16 AMPERES, 600 VOLTS 1 2 3 MARKING DIAGRAM Mechanical Characteristics: •Case: Epoxy, Molded •Weight: 1.9 Grams (Approximately) •Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable •Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds MAXIMUM RATINGS (Per Leg) Rating Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 600 V Average Rectified Forward Current Total Device, (Rated VR), TC = 150°C Per Diode Per Device IF(AV) 8 16 IFM 16 A Non-repetitive Peak Surge Current (Surge applied at rated load conditions halfwave, single phase, 60 Hz) IFSM 100 A RMS Isolation Voltage (t = 0.3 second, R.H. ≤ 30%, TA = 25°C) (Note 1) Per Figure 3 2 3 A Peak Repetitive Forward Current (Rated VR, Square Wave, 20 kHz), TC = 150°C Operating Junction and Storage Temperature 1 ISOLATED TO-220 CASE 221D STYLE 3 AYWW U1660G AKA A Y WW U1660 G AKA = Assembly Location = Year = Work Week = Device Code = Pb-Free Package = Diode Polarity ORDERING INFORMATION TJ, Tstg - 65 to +150 Viso1 °C V 4500 Device MURF1660CT MURF1660CTG Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Proper strike and creepage distance must be provided. Package Shipping TO-220 50 Units/Rail TO-220 (Pb-Free) 50 Units/Rail Preferred devices are recommended choices for future use and best overall value. *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2007 June, 2007 - Rev. 5 1 Publication Order Number: MURF1660CT/D MURF1660CT THERMAL CHARACTERISTICS (Per Leg) Characteristic Maximum Thermal Resistance, Junction-to-Case Symbol Value Unit RqJC 3.0 °C/W TL 260 °C Symbol Value Unit Lead Temperature for Soldering Purposes: 1/8″ from Case for 5 Seconds ELECTRICAL CHARACTERISTICS (Per Leg) Characteristic Maximum Instantaneous Forward Voltage (Note 2) (iF = 8.0 A, TC = 150°C) (iF = 8.0 A, TC = 25°C) vF Maximum Instantaneous Reverse Current (Note 2) (Rated DC Voltage, TC = 150°C) (Rated DC Voltage, TC = 25°C) iR Maximum Reverse Recovery Time (IF = 1.0 A, di/dt = 50 A/ms) (IF = 0.5 A, iR = 1.0 A, IREC = 0.25 A) trr i F , INSTANTANEOUS FORWARD CURRENT (AMPS) 50 TJ = 150°C 20 100°C 25°C 10 5 2 1 0.5 0.6 1.0 1.2 0.8 1.4 vF, INSTANTANEOUS VOLTAGE (V) 1.6 1.8 Figure 1. Typical Forward Voltage, Per Leg 10 K I R, REVERSE CURRENT (A) μ 1.0 K 100 TJ = 150°C 10 100°C 1.0 25°C 0.1 0.01 100 ns 60 50 100 0.4 mA 500 10 2. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%. 0.2 0.1 V 1.20 1.50 200 300 400 VR, REVERSE VOLTAGE (V) 500 Figure 2. Typical Reverse Current, Per Leg* http://onsemi.com 2 600 MURF1660CT TEST CONDITION FOR ISOLATION TEST* FULLY ISOLATED PACKAGE LEADS HEATSINK 0.110, MIN Figure 3. Mounting Position * Measurement made between leads and heatsink with all leads shorted together. MOUNTING INFORMATION CLIP HEATSINK Clip-Mounted Figure 4. Typical Mounting Technique http://onsemi.com 3 MURF1660CT PACKAGE DIMENSIONS TO-220 FULLPAK CASE 221D-03 ISSUE J SEATING PLANE -T-B- F C S Q NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH 3. 221D-01 THRU 221D-02 OBSOLETE, NEW STANDARD 221D-03. U A 1 2 3 H -Y- K G N L D J R 3 PL 0.25 (0.010) M B M Y DIM A B C D F G H J K L N Q R S U INCHES MIN MAX 0.617 0.635 0.392 0.419 0.177 0.193 0.024 0.039 0.116 0.129 0.100 BSC 0.118 0.135 0.018 0.025 0.503 0.541 0.048 0.058 0.200 BSC 0.122 0.138 0.099 0.117 0.092 0.113 0.239 0.271 MILLIMETERS MIN MAX 15.67 16.12 9.96 10.63 4.50 4.90 0.60 1.00 2.95 3.28 2.54 BSC 3.00 3.43 0.45 0.63 12.78 13.73 1.23 1.47 5.08 BSC 3.10 3.50 2.51 2.96 2.34 2.87 6.06 6.88 STYLE 3: PIN 1. ANODE 2. CATHODE 3. ANODE SWITCHMODE is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 4 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MURF1660CT/D