Download

Contents
Terminals, P-Series
1282250000 – 2012/2013
Terminals, P-Series
Terminals, P-Series
Overview P-Series
B.2
Feed-through terminals
B.4
Double-level terminals
B.8
Initiator and motor connection terminals
B.10
PE terminals
B.11
Fuse terminals
B.16
Test-disconnect terminals
B.18
Actuator and installation terminals – overview
B.24
Actuator and installation terminals
B.26
Marshalling- and potential distribution terminal blocks – overview
B.36
Marshalling- and potential distribution terminal blocks
B.38
Accessories P-Series
B.44
B
B.1
Overview P-Series
Terminals, P-Series
Terminal blocks with PUSH IN wire connection
Wiring is quick and safe
Increase your efficiency. The PUSH IN connection method and the associated
reduction in the number of versions will help you.
B
Among the impressive features of the direct PUSH IN connection system are
minimal wiring times and reliable, simple handling. Compared to the 3-conductor
tension clamps, the direct PUSH IN system achieves time-savings of up to 50 %
when connecting the conductor (3.5 seconds per conductor). The stripped solid
conductor is simply pushed into the terminal as far as it will go – that’s all there is
to it. No tools are required, and the result is a reliable, vibration-resistant, gas-tight
connection. Even flexible conductors with crimped wire end ferrules or ultrasonicwelded conductors can be connected without any problems.
Quick and safe
Wiring time is significantly reduced with the
direct insertion technique for solid-core and
flexible stranded wires with ferrules thanks to
the PUSH IN connection method – considerably
quicker to connect and no need for additional
tools.
Contact security
The long-term contact force between wire and
busbar is ensured with a stainless steel spring.
The busbar is made of copper with a tin alloy,
this ensures a very low voltage drop.
B.2
1282250000 – 2012/2013
Terminals, P-Series
Overview P-Series
Simple operation
The PUSH IN contact‘s spring movement is
limited by the spring stop mechanism, improper
use is prevented by the design of the terminals.
B
Wemid insulating material
•Non-tracking, CTI 600
•Thermally stable up to 120 °C
•V0 flammability rating to UL94
•Halogen and phosphor free, flame-retardant
1282250000 – 2012/2013
B.3
Feed-through terminals
PDU 2.5/4
4 mm²
Terminals, P-Series
2 connections
PDU 2.5/4 3AN
4 mm²
3 connections
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
B
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 53 x 39
/6
0.13...6
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Twin wire-end ferrule
Stripping length / Blade size
V
A
mm²
IEC
800
32
4
Ex e II
UL
CSA
600 (C)
600 (C)
30 (C)
30 (C)
AWG 26...10
AWG 26...10
8 kV / 3
A3 / V-0
T
5.1 x 67.5 x 39
/6
0.13...6
II 2 G D
EN 60079-7
550
29
4
r{ u#i
mm²
mm²
mm²
mm/-
IEC 60947-7-1
IEC
800
32
4
Ex e II
UL
CSA
600 (C)
600 (C)
30 (C)
30 (C)
AWG 26...10
AWG 26...10
8 kV / 3
A3 / V-0
T
II 2 G D
EN 60079-7
550
29
4
r{ u#i
Rated connection
0.5...6
0.5...4 / 0.5...4
0.5...2.5
12 / 3.0 x 0.5 mm
Rated connection
0.5...6
0.5...4 / 0.5...4
0.5...2.5
12 / 3.0 x 0.5 mm
Note
Ordering data
Version
Dark beige Wemid
Blue Wemid
Note
Type
PDU 2.5/4
PDU 2.5/4 BL
Qty.
100
50
Order No.
1896110000
1896230000
Type
PDU 2.5/4/3AN
PDU 2.5/4/3AN BL
Qty.
100
50
Order No.
1896120000
1896240000
For 4 mm² conductors, use ferrules with a cross-section-optimised plastic collar
(Order no. 9203630000).
For 4 mm² conductors, use ferrules with a cross-section-optimised plastic collar
(Order no. 9203630000).
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
Accessories
Pluggable cross-connection
End plate / Partition plate
End bracket
Test adapter
Screwdriver
Reducing sleeves
Cover
Identification systems
Note
B.4
2-pole
3-pole
4-pole
10-pole
20-/24-pole
Dark beige Wemid
PAP 2.5/4
Dark beige Wemid
ZEW 35
Standard
With assembly peg
PTA PDU2.5/4
PTA ZA PDU2.5/4
Standard
current
24 A
24 A
24 A
24 A
24 A
Width
2.5 mm
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
50
1896300000
PAP 2.5/4/4AN
6 mm
20
9540000000
ZEW 35
5.1 mm
5.1 mm
25
25
1916180000
1916190000
PTA PDU2.5/4
PTA ZA PDU2.5/4
1
9008320000
SDS 0.5X3.0X80
SDS 0.5X3.0X80
current
24 A
24 A
24 A
24 A
24 A
Width
2.5 mm
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
50
1896320000
6 mm
20
9540000000
5.1 mm
5.1 mm
25
25
1916180000
1916190000
1
9008320000
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
PRH 2.5/4/1
PRH 2.5/4/2
6.16 mm
6.16 mm
100
100
1916410000
1916400000
PRH 2.5/4/1
PRH 2.5/4/2
6.16 mm
6.16 mm
100
100
1916410000
1916400000
With lightning flash symbol
PAD 2.5/4/4
5.1 mm
80
1916150000
PAD 2.5/4/4
5.1 mm
80
1916150000
(see assortment in catalogue 7)
Marking tags
DEK 5/5 / WS 10/5
DEK 5/5 / WS 10/5
Detailed information for working with twin ferrules can be found in the P Series
Accessories section.
Detailed information for working with twin ferrules can be found in the P Series
Accessories section.
1282250000 – 2012/2013
Feed-through terminals
4 mm²
4 connections
4 mm²
2 x 2 connections
5.1 x 78.5 x 39
/6
0.13...6
IEC 60947-7-1
IEC
800
32
4
PDU 2.5/4 2x2
Ex e II
UL
CSA
600 (C)
600 (C)
30 (C)
30 (C)
AWG 26...10
AWG 26...10
8 kV / 3
A3 / V-0
T
II 2 G D
IEC 60947-7-1
UL
CSA
IEC
800
57
10
8 kV / 3
A3 / V-0
r{ u#i
#
Rated connection
0.5...6
0.5...4 / 0.5...4
0.5...2.5
12 / 3.0 x 0.5 mm
Qty.
100
50
Order No.
1896130000
1896250000
Ex e II
UL
CSA
600 (C)
600 (C)
44 (C)
46 (C)
AWG 14...8
AWG 14...8
8 kV / 3
A4 / V-0
T
II 2 G D
EN 60079-7
550
37
10
r{ u#i
Rated connection
0.5...6
0.5...4 / 0.5...4
0.5...2.5
12 / 3.0 x 0.5 mm
Type
PDU 2.5/4/4AN
PDU 2.5/4/4AN BL
B
8.1 x 64.5 x 41.5
57 / 10
1.5...10
IEC 60947-7-1
IEC
800
32
4
10 mm²
2 connections
5.1 x 78 x 39
/6
0.13...6
EN 60079-7
550
27
4
PDU 6/10
Terminals, P-Series
PDU 2.5/4 4AN
Rated connection
1.5...6
1.5...10 / 1.5...10
14 / 0.6 x 3.5 mm
Type
PDU 2.5/4/2X2AN
Qty.
50
Order No.
1022220000
Type
PDU 6/10
PDU 6/10 BL
Qty.
50
25
Order No.
1896140000
1896270000
For 4 mm² conductors, use ferrules with a cross-section-optimised plastic collar
(Order no. 9203630000).
For 4 mm² conductors, use ferrules with a cross-section-optimised plastic collar
(Order no. 9203630000).
For 10 mm² conductors, use ferrules with a cross-section-optimised plastic collar
(Order no. 9203620000).
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
Type
ZQV 6N/2
ZQV 6N/3
ZQV 6N/4
PAP 2.5/4/4AN
ZEW 35
PTA PDU2.5/4
PTA ZA PDU2.5/4
current
24 A
24 A
24 A
24 A
24 A
Width
2.5 mm
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
Type
current
50
1896320000
PAP 2.5/4/4AN
Width
2.5 mm
50
1896320000
PAP PDU6/10
6 mm
20
9540000000
ZEW 35
6 mm
20
9540000000
ZEW 35
5.1 mm
5.1 mm
25
25
1916180000
1916190000
PTA PDU2.5/4
PTA ZA PDU2.5/4
5.1 mm
5.1 mm
25
25
1916180000
1916190000
1
9008320000
SDS 0.5X3.0X80
1
9008320000
SDS 0.5X3.0X80
Qty.
Order No.
ZQV 6N/20
PRH 2.5/4/1
PRH 2.5/4/2
6.16 mm
6.16 mm
100
100
1916410000
1916400000
PRH 2.5/4/1
PRH 2.5/4/2
6.16 mm
6.16 mm
100
100
1916410000
1916400000
PAD 2.5/4/4
5.1 mm
80
1916150000
PAD 2.5/4/4
5.1 mm
80
1916150000
DEK 5/5 / WS 10/5
DEK 5/5 / WS 10/5
Detailed information for working with twin ferrules can be found in the P Series
Accessories section.
Detailed information for working with twin ferrules can be found in the P Series
Accessories section.
1282250000 – 2012/2013
current
Width
2.5 mm
6 mm
SDS 0.5X3.0X80
PAD 6/10/4
5.3 mm
Qty.
60
60
60
Order No.
1906210000
1906220000
1906230000
20
1906240000
20
1896330000
20
9540000000
1
9008320000
80
1916160000
WS 10/8
B.5
Feed-through terminals
PDU 6/10 3AN
10 mm²
PDU 6/10 4AN
10 mm²
Terminals, P-Series
3 connections
NEW
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
B
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
8.1 x 82.5 x 41.5
57 / 10
1.5...10
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Twin wire-end ferrule
Stripping length / Blade size
V
A
mm²
mm²
mm²
mm²
mm/-
IEC
800
57
10
Ex e II
UL
CSA
600 (C)
600 (C)
44 (C)
46 (C)
AWG 14...8
AWG 14...8
8 kV / 3
A4 / V-0
T
8.1 x 97 x 41.5
57 / 10
1.5...10
II 2 G D
EN 60079-7
550
37
10
IEC 60947-7-1
IEC
800
57
10
r{ u#i
{#
14 / 0.6 x 3.5 mm
14 / 0.6 x 3.5 mm
Rated connection
1.5...6
1.5...10 / 1.5...10
UL
CSA
600 (C)
47 (C)
AWG 14...8
8 kV / 3
A4 / V-0
Rated connection
1.5...6
1.5...10 / 1.5...10
Note
Ordering data
Version
Dark beige Wemid
Blue Wemid
Note
Type
PDU 6/10/3AN
PDU 6/10/3AN BL
Qty.
50
50
Order No.
1896150000
1896280000
Type
PDU 6/10/4AN
PDU 6/10 4AN BL
Qty.
50
25
Order No.
1083040000
1165130000
For 10 mm² conductors, use ferrules with a cross-section-optimised plastic collar
(Order no. 9203620000).
Accessories
Pluggable cross-connection
End plate / Partition plate
End bracket
Test adapter
Screwdriver
Reducing sleeves
Cover
Identification systems
2-pole
3-pole
4-pole
10-pole
20-/24-pole
Type
ZQV 6N/2
ZQV 6N/3
ZQV 6N/4
ZQV 6N/20
Dark beige Wemid
PAP PDU6/10/3AN
Dark beige Wemid
ZEW 35
current
Qty.
60
60
60
Order No.
1906210000
1906220000
1906230000
Type
ZQV 6N/2
ZQV 6N/3
ZQV 6N/4
ZQV 6N/20
Width
2.5 mm
20
1906240000
20
1896340000
6 mm
20
9540000000
ZEW 35
1
9008320000
SDS 0.5X3.0X80
80
1916160000
PAD 6/10/4
current
Width
6 mm
Qty.
60
60
60
Order No.
1906210000
1906220000
1906230000
20
1906240000
20
9540000000
1
9008320000
80
1916160000
Standard
With assembly peg
Standard
SDS 0.5X3.0X80
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
With lightning flash symbol
(see assortment in catalogue 7)
Marking tags
PAD 6/10/4
WS 10/8
5.3 mm
5.3 mm
WS 10/8
Note
B.6
1282250000 – 2012/2013
Feed-through terminals
PDU 16
16 mm²
16 mm²
Supply terminal
12.1 x 80.5 x 48
/ 16
2.5...16
Ex e II
IEC
800
76
16
PEI 16
UL
CSA
600 (C)
600 (C)
75 (C)
78 (C)
AWG 14...4
AWG 14...4
8 kV / 3
B6 / V-0
T
Terminals, P-Series
2 connections
B
15 x 80.5 x 48
/ 16
2.5...16
II 2 G D
EN 60079-7
550
59
16
Ex e II
IEC
800
76
16
UL
CSA
600 (C)
600 (C)
75 (C)
78 (C)
AWG 14...4
AWG 14...4
8 kV / 3
B6 / V-0
r{u#i
r{ u#i
18 / 1.0 x 5.5 mm
18 / 1.0 x 5.5 mm
Rated connection
2.5...16
2.5...16 / 2.5...16
T
II 2 G D
EN 60079-7
550
66
16
Rated connection
2.5...16
2.5...16 / 2.5...16
Type
PDU 16
PDU 16 BL
Qty.
25
10
Order No.
1896400000
1896220000
Type
PEI 16
PEI 16 BL
Qty.
25
25
Order No.
1918780000
1918790000
Terminal contains end plate.
No separate end plate is necessary.
Type
ZQV 16/2
current
76 A
Qty.
25
Order No.
1739690000
PAP 16
Width
2.7 mm
10
1896290000
ZEW 35
6 mm
20
9540000000
ZEW 35
1
1274680000
SDIS SL 1.0X4.5X125
80
1916170000
PAD 16/4
SDIS SL 1.0X4.5X125
PAD 16/4
WS 12/8
1282250000 – 2012/2013
7.3 mm
Type
ZQV 2.5/2
ZQV 6N/3
current
24 A
Width
6 mm
7.3 mm
Qty.
60
60
Order No.
1608860000
1906220000
20
9540000000
1
1274680000
80
1916170000
WS 12/8
B.7
Double-level terminals
PDK 2.5/4
2.5 mm²
Terminals, P-Series
Double-level terminal
PDK 2.5/4 V
2.5 mm²
Vertical cross-connected double-level terminal
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
B
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Twin wire-end ferrule
Stripping length / Blade size
V
A
mm²
5.1 x 82.5 x 58.5
28 / 6
0.13...6
5.1 x 82.5 x 58.5
28 / 6
0.13...6
IEC 60947-7-1
IEC 60947-7-1
IEC
800
24
2.5
UL
CSA
600 (C)
600 (C)
30 (C)
30 (C)
AWG 26...10
AWG 26...10
8 kV / 3
A3 / V-0
IEC
800
24
2.5
r{u#i
mm²
mm²
mm²
mm/-
UL
CSA
600 (C)
600 (C)
30 (C)
30 (C)
AWG 26...10
AWG 26...10
8 kV / 3
A3 / V-0
r{u#i
Rated connection
0.5...6
0.5...4 / 0.5...4
0.5...2.5
12 / 3.0 x 0.5 mm
Rated connection
0.5...6
0.5...4 / 0.5...4
0.5...2.5
12 / 3.0 x 0.5 mm
Note
Ordering data
Version
Dark beige Wemid
Blue Wemid
Note
Type
PDK 2.5/4
PDK 2.5/4 BL
Qty.
50
50
Order No.
1918770000
1918760000
Type
PDK 2.5/4V
PDK 2.5/4V BL
Qty.
50
50
Order No.
1918730000
1918680000
For 4 mm² conductors, use ferrules with a cross-section-optimised plastic collar
(Order no. 9203630000).
For 4 mm² conductors, use ferrules with a cross-section-optimised plastic collar
(Order no. 9203630000).
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
Accessories
Pluggable cross-connection
End plate / Partition plate
End bracket
Screwdriver
Reducing sleeves
Cover
Identification systems
Note
B.8
2-pole
3-pole
4-pole
10-pole
20-/24-pole
Dark beige Wemid
PAP PDK 2.5/4
Dark beige Wemid
ZEW 35
Standard
current
24 A
24 A
24 A
24 A
24 A
Width
2.5 mm
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
20
1919720000
PAP PDK 2.5/4
6 mm
20
9540000000
ZEW 35
1
9008320000
SDS 0.5X3.0X80
SDS 0.5X3.0X80
current
24 A
24 A
24 A
24 A
24 A
Width
2.5 mm
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
20
1919720000
6 mm
20
9540000000
1
9008320000
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
PRH 2.5/4/1
PRH 2.5/4/2
6.16 mm
6.16 mm
100
100
1916410000
1916400000
PRH 2.5/4/1
PRH 2.5/4/2
6.16 mm
6.16 mm
100
100
1916410000
1916400000
With lightning flash symbol
PAD 2.5/4/4
5.1 mm
80
1916150000
PAD 2.5/4/4
5.1 mm
80
1916150000
(see assortment in catalogue 7)
Marking tags
DEK 5/5 / SNAPMARK I(1805880000)
DEK 5/5 / SNAPMARK I(1805880000)
Detailed information for working with twin ferrules can be found in the P Series
Accessories section.
Detailed information for working with twin ferrules can be found in the P Series
Accessories section.
1282250000 – 2012/2013
Double-level terminals
2.5 mm²
PDK 2.5/4 L-PE
2.5 mm²
Terminals, P-Series
PDK 2.5/4 N-L
5.1 x 82.5 x 58.5
28 / 6
0.13...6
N
IEC 60947-7-1
IEC
800
24
2.5
5.1 x 82.5 x 58.5
28 / 6
0.13...6
B
3(
IEC 60947-7-2
UL
CSA
600 (C)
600 (C)
30 (C)
30 (C)
AWG 26...10
AWG 26...10
8 kV / 3
A3 / V-0
IEC
800
24
2.5
r{u#i
UL
CSA
600 (C)
600 (C)
30 (C)
30 (C)
AWG 26...10
AWG 26...10
8 kV / 3
A3 / V-0
r{u#i
Rated connection
0.5...6
0.5...4 / 0.5...4
0.5...2.5
12 / 3.0 x 0.5 mm
Rated connection
0.5...6
0.5...4 / 0.5...4
0.5...2.5
12 / 3.0 x 0.5 mm
Type
PDK 2.5/4N-L
Qty.
50
Order No.
1918740000
Type
PDK 2.5/4L-PE
Qty.
50
Order No.
1918720000
For 4 mm² conductors, use ferrules with a cross-section-optimised plastic collar
(Order no. 9203630000).
For 4 mm² conductors, use ferrules with a cross-section-optimised plastic collar
(Order no. 9203630000).
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
PAP PDK 2.5/4
ZEW 35
current
24 A
24 A
24 A
24 A
24 A
Width
2.5 mm
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
20
1919720000
PAP PDK 2.5/4
6 mm
20
9540000000
ZEW 35
1
9008320000
SDS 0.5X3.0X80
SDS 0.5X3.0X80
current
24 A
24 A
24 A
24 A
24 A
Width
2.5 mm
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
20
1919720000
6 mm
20
9540000000
1
9008320000
PRH 2.5/4/1
PRH 2.5/4/2
6.16 mm
6.16 mm
100
100
1916410000
1916400000
PRH 2.5/4/1
PRH 2.5/4/2
6.16 mm
6.16 mm
100
100
1916410000
1916400000
PAD 2.5/4/4
5.1 mm
80
1916150000
PAD 2.5/4/4
5.1 mm
80
1916150000
DEK 5/5 / SNAPMARK I(1805880000)
DEK 5/5 / SNAPMARK I(1805880000)
Detailed information for working with twin ferrules can be found in the P Series
Accessories section.
Detailed information for working with twin ferrules can be found in the P Series
Accessories section.
1282250000 – 2012/2013
B.9
Initiator and motor connection terminals
Terminals, P-Series
PMAK 4
4 mm²
PMAK 4 800 V
NEW
NEW
5.1 x 103.86 x 79.05
/6
0.5...6
6.1 x 107.5 x 82.6
/6
0.5...6
IEC 60947-7-1 (-7-2)
IEC 60947-7-1 (-7-2)
4 mm²
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
B
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Twin wire-end ferrule
Stripping length / Blade size
IEC
400
30
4
V
A
mm²
mm²
mm²
mm²
mm/-
UL
CSA
300 (C)
29 (C)
AWG 26...10
6 kV /
A3 / V-0
IEC
800
32
4
{
{
12 / 0.4 x 2.5 mm
12 / 0.4 x 2.5 mm
Rated connection
0.5...6
0.5...4 / 4...0.5
UL
CSA
600 (C)
29 (C)
AWG 26...10
8 kV /
A3 / V-0
Rated connection
0.5...6
0.5...4 / 4...0.5
Note
Ordering data
Version
Dark beige Wemid
Type
PMAK 4
Qty.
50
Note
Order No.
1221340000
Type
PMAK 4 800V
Type
Qty.
50
Order No.
1221350000
Accessories
Pluggable cross-connection
End plate / Partition plate
End bracket
Screwdriver
Identification systems
2-pole
3-pole
4-pole
10-pole
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
Dark beige Wemid
PAP PMAK 4
Dark beige Wemid
ZEW 35/2
Standard
(see assortment in catalogue 7)
Marking tags
SDS 0.4X2.5X75
DEK 5/5
current
24 A
24 A
24 A
24 A
Width
1 mm
Qty.
60
60
60
20
Order No.
1608860000
1608870000
1608880000
1608940000
20
1221360000
8 mm
20
8630740000
ZEW 35/2
1
9009030000
SDS 0.4X2.5X75
current
Qty.
Order No.
Width
8 mm
20
8630740000
1
9009030000
DEK 5/5
Note
B.10
1282250000 – 2012/2013
PE terminals
PPE 2.5/4
4 mm²
PPE 2.5/4 3AN
4 mm²
3 connections
Terminals, P-Series
2 connections
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 53 x 39
/6
0.13...6
PE
IEC 60947-7-2
Rated data
Rated cross-section
Rated voltage to adjoining terminal
Rated impulse withstand voltage to adjacent terminal
Rated short-time current
Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Twin wire-end ferrule
Stripping length / Blade size
mm²
V
kV
IEC
4
800
8
5.1 x 67 x 39
/6
0.13...6
Ex e II
UL
AWG 26...10
CSA
AWG 26...10
T
II 2 G D
EN 60079-7
4
IEC 60947-7-2
IEC
4
800
8
Ex e II
UL
AWG 26...10
480 A (4 mm²)
3
A3 / V-0
CSA
AWG 26...10
T
II 2 G D
EN 60079-7
4
480 A (4 mm²)
3
A3 / V-0
r{u#i
mm²
mm²
mm²
mm/-
B
PE
r{u#i
Rated connection
0.5...6
0.5...4 / 0.5...4
0.5...2.5
12 / 3.0 x 0.5 mm
Rated connection
0.5...6
0.5...4 / 0.5...4
0.5...2.5
12 / 3.0 x 0.5 mm
Note
Ordering data
Version
green/yellow Wemid
Note
Type
PPE 2.5/4
Qty.
50
Order No.
1896170000
Type
PPE 2.5/4/3AN
Qty.
50
Order No.
1896200000
For 4 mm² conductors, use ferrules with a cross-section-optimised plastic collar
(Order no. 9203630000).
For 4 mm² conductors, use ferrules with a cross-section-optimised plastic collar
(Order no. 9203630000).
Dark beige Wemid
Type
PAP 2.5/4
Dark beige Wemid
ZEW 35
Accessories
End plate / Partition plate
End bracket
Screwdriver
Reducing sleeves
Cover
Identification systems
Note
1282250000 – 2012/2013
Standard
Width
2.5 mm
Qty.
50
Order No.
1896300000
Type
PAP 2.5/4/3AN
6 mm
20
9540000000
ZEW 35
1
9008320000
SDS 0.5X3.0X80
SDS 0.5X3.0X80
Width
2.5 mm
Qty.
50
Order No.
1896480000
6 mm
20
9540000000
1
9008320000
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
PRH 2.5/4/1
PRH 2.5/4/2
6.16 mm
6.16 mm
100
100
1916410000
1916400000
PRH 2.5/4/1
PRH 2.5/4/2
6.16 mm
6.16 mm
100
100
1916410000
1916400000
With lightning flash symbol
PAD 2.5/4/4
5.1 mm
80
1916150000
PAD 2.5/4/4
5.1 mm
80
1916150000
(see assortment in catalogue 7)
Marking tags
DEK 5/5 / WS 10/5
DEK 5/5 / WS 10/5
Detailed information for working with twin ferrules can be found in the P Series
Accessories section.
Detailed information for working with twin ferrules can be found in the P Series
Accessories section.
B.11
PE terminals
PPE 2.5/4 4AN
4 mm²
Terminals, P-Series
4 connections
PPE 6/10
10 mm²
2 connections
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
B
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 80 x 39
/6
0.13...6
PE
IEC 60947-7-2
Rated data
Rated cross-section
Rated voltage to adjoining terminal
Rated impulse withstand voltage to adjacent terminal
Rated short-time current
Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Twin wire-end ferrule
Stripping length / Blade size
mm²
V
kV
IEC
4
800
8
8.1 x 63.5 x 41.5
/ 10
1.5...10
Ex e II
UL
AWG 26...10
CSA
AWG 26...10
T
II 2 G D
EN 60079-7
4
IEC 60947-7-2
IEC
10
800
8
Ex e II
UL
AWG 14...8
480 A (4 mm²)
3
A3 / V-0
CSA
AWG 14...8
T
II 2 G D
EN 60079-7
10
1200 A (10 mm²)
3
A4 / V-0
r{u#i
mm²
mm²
mm²
mm/-
PE
r{u#i
Rated connection
0.5...6
0.5...4 / 0.5...4
0.5...2.5
12 / 3.0 x 0.5 mm
Rated connection
1.5...6
1.5...10 / 1.5...10
14 / 0.6 x 3.5 mm
Note
Ordering data
Version
green/yellow Wemid
Note
Type
PPE 2.5/4/4AN
Qty.
50
Order No.
1896160000
Type
PPE 6/10
Qty.
25
Order No.
1896180000
For 4 mm² conductors, use ferrules with a cross-section-optimised plastic collar
(Order no. 9203630000).
For 10 mm² conductors, use ferrules with a cross-section-optimised plastic collar
(Order no. 9203620000).
Dark beige Wemid
Type
PAP 2.5/4/4AN
Dark beige Wemid
ZEW 35
Accessories
End plate / Partition plate
End bracket
Screwdriver
Reducing sleeves
Cover
Identification systems
Note
B.12
Standard
Width
2.5 mm
Qty.
50
Order No.
1896320000
Type
PAP PDU6/10
6 mm
20
9540000000
ZEW 35
1
9008320000
SDS 0.5X3.0X80
SDS 0.5X3.0X80
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
PRH 2.5/4/1
PRH 2.5/4/2
6.16 mm
6.16 mm
100
100
1916410000
1916400000
With lightning flash symbol
PAD 2.5/4/4
5.1 mm
80
1916150000
(see assortment in catalogue 7)
Marking tags
DEK 5/5 / WS 10/5
PAD 6/10/4
Width
2.5 mm
Qty.
20
Order No.
1896330000
6 mm
20
9540000000
1
9008320000
80
1916160000
5.3 mm
WS 10/8
Detailed information for working with twin ferrules can be found in the P Series
Accessories section.
1282250000 – 2012/2013
PE terminals
PPE 6/10 3AN
10 mm²
Terminals, P-Series
3 connections
8.1 x 81.5 x 41.5
/ 10
1.5...10
IEC 60947-7-2
IEC
10
800
8
B
PE
Ex e II
UL
AWG 14...8
CSA
AWG 14...8
T
II 2 G D
EN 60079-7
10
1200 A (10 mm²)
3
A4 / V-0
r{u#i
Rated connection
1.5...6
1.5...10 / 1.5...10
14 / 0.6 x 3.5 mm
Type
PPE 6/10/3AN
Qty.
25
Order No.
1896190000
For 10 mm² conductors, use ferrules with a cross-section-optimised plastic collar
(Order no. 9203620000).
Type
PAP PDU6/10/3AN
ZEW 35
Width
2.5 mm
Qty.
20
Order No.
1896340000
6 mm
20
9540000000
1
9008320000
80
1916160000
SDS 0.5X3.0X80
PAD 6/10/4
5.3 mm
WS 10/8
1282250000 – 2012/2013
B.13
PE terminals
PPE 16
16 mm²
Terminals, P-Series
2 connections
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
B
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
12.1 x 81 x 48
/ 16
2.5...16
PE
IEC 60947-7-2
Rated data
Rated cross-section
Rated voltage to adjoining terminal
Rated impulse withstand voltage to adjacent terminal
Rated short-time current
Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Twin wire-end ferrule
Stripping length / Blade size
mm²
V
kV
IEC
16
800
8
Ex e II
UL
AWG 14...4
CSA
AWG 14...4
T
II 2 G D
EN 60079-7
16
1920 A (16 mm²)
3
B6 / V-0
r{u#i
mm²
mm²
mm²
mm/-
Rated connection
2.5...16
2.5...16 / 2.5...16
18 / 1.0 x 5.5 mm
Note
Ordering data
Version
green/yellow Wemid
Type
PPE 16
Qty.
10
Order No.
1896210000
Note
Accessories
Pluggable cross-connection
End plate / Partition plate
End bracket
Screwdriver
Cover
Identification systems
Type
ZQV 16/2
current
76 A
Qty.
25
Order No.
1739690000
Dark beige Wemid
PAP 16
Width
2.7 mm
10
1896290000
Dark beige Wemid
ZEW 35
6 mm
20
9540000000
1
1274680000
80
1916170000
2-pole
Standard
SDIS SL 1.0X4.5X125
With lightning flash symbol
PAD 16/4
(see assortment in catalogue 7)
Marking tags
WS 10/12
7.3 mm
Note
B.14
1282250000 – 2012/2013
PE terminals
4 mm²
Terminals, P-Series
PDK 2.5/4 PE
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 82.5 x 58.5
/6
0.13...6
IEC 60947-7-2
Rated data
Rated cross-section
Rated voltage to adjoining terminal
Rated impulse withstand voltage to adjacent terminal
Rated short-time current
Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Twin wire-end ferrule
Stripping length / Blade size
mm²
V
kV
IEC
4
800
8
B
PE
Ex e II
UL
AWG 26...10
CSA
AWG 26...10
T
II 2 G D
EN 60079-7
4
480 A (4 mm²)
3
A3 / V-0
r{u#i
mm²
mm²
mm²
mm/-
Rated connection
0.5...6
0.5...4 / 0.5...4
0.5...2.5
Note
Ordering data
Version
green/yellow Wemid
Note
Type
PDK 2.5/4 PE
Qty.
50
Order No.
1918710000
For 4 mm² conductors, use ferrules with a cross-section-optimised plastic collar
(Order no. 9203630000).
Accessories
End plate / Partition plate
End bracket
Screwdriver
Reducing sleeves
Cover
Identification systems
Note
1282250000 – 2012/2013
Dark beige Wemid
Type
PAP PDK 2.5/4
Dark beige Wemid
ZEW 35
Standard
Width
2.5 mm
Qty.
20
Order No.
1919720000
6 mm
20
9540000000
1
9008320000
SDS 0.5X3.0X80
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
PRH 2.5/4/1
PRH 2.5/4/2
6.16 mm
6.16 mm
100
100
1916410000
1916400000
With lightning flash symbol
PAD 2.5/4/4
5.1 mm
80
1916150000
(see assortment in catalogue 7)
Marking tags
DEK 5/5 / WS 10/5
Detailed information for working with twin ferrules can be found in the P Series
Accessories section.
B.15
Fuse terminals
PSI 6/10
10 mm²
PSI 6/10
Terminals, P-Series
Overload and short-circuit protection
NEW
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
B
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
12.2 x 81 x 40.35
10 / 10
1.5...10
IEC 60947-7-1
Rated data
Rated voltage to adjoining terminal
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Blade size
IEC
250
6.3
10
V
A
mm²
UL
Type
PSI 6/10
CSA
Order No.
1083050000
8 kV / 3
V-0
#
mm²
mm²
Rated connection
1.5...6
1.5...10 / 1.5...10
0.6 x 3.5 mm
Arrangement
Individual
In combination
Note
Applications
Only short-circuit
Overload and shortprotection
circuit protection
TA max. Nominal values TA max. Nominal values
35 °C 2.5 W / 6.3 A
26 °C 2.5 W / 6.3 A
Ordering data
Version
Dark beige Wemid
black
Note
Type
PSI 6/10
PSI 6/10 SW
Qty.
25
25
Order No.
1083050000
1165140000
Short-circuit protection aligned individually: 10 A and 4 W.
Accessories
Pluggable cross-connection
3-pole
5-pole
7-pole
9-pole
End plate / Partition plate
End bracket
Screwdriver
G-fuse cartridge, 5 x 20mm (IEC 60127-2)
Identification systems
Note
B.16
Type
ZQV 4/3 GE
ZQV 4/5 GE
ZQV 4/7 GE
ZQV 4/9 GE
Dark beige Wemid
black
PAP PTL/PSI 6/10
PAP PTL/PSI 6/10 SW
Dark beige Wemid
ZEW 35
Standard
0.25 A fast
0.50 A fast
1.00 A fast
2.00 A fast
(see assortment in catalogue 7)
Marking tags
SDS 0.5X3.0X80
G 20/0.25A/F
G 20/0.50A/F
G 20/1.00A/F
G 20/2.00A/F
current
32 A
32 A
32 A
32 A
Width
2.5 mm
2.5 mm
Qty.
60
20
20
20
Order No.
1608960000
1608980000
1609000000
1609020000
20
20
1165320000
1165330000
6 mm
20
9540000000
1
9008320000
10
10
10
10
0430500000
0430600000
0430700000
0430900000
WS 10/8
Every second pin on the cross-connection must be broken out.
1282250000 – 2012/2013
Fuse terminals – Accessories
Terminals, P-Series
Cartridge fuses and gauge pieces for Weidmüller fuse terminals
Cartridge fuses
for terminal type
PSI 6/10
Technical data / Ordering data
G-type cartridge fuses 5 x 20 without indicators to IEC 60127-2 (VDE 0820 pt.2 Bl)
Size (mm)
Nom. current (A) Type
0.1
(F)
5 x 20
0.2
(F)
0.25
(F)
breaking capacity 1500 A
0.5
(F)
(at 250 V, 50 Hz, cos : 0.7)
0.63
(F)
1.0
(F)
1.6
(F)
2.0
(F)
2.5
(F)
3.15
(F)
4.0
(F)
5.0
(F)
6.3
(F)
G 20/0.10A/F
G 20/0.20A/F
G 20/0.25A/F
G 20/0.50A/F
G 20/0.63A/F
G 20/1.00A/F
G 20/1.60A/F
G 20/2.00A/F
G 20/2.50A/F
G 20/3.15A/F
G 20/4.00A/F
G 20/5.00A/F
G 20/6.30A/F
Qty.
10
10
10
10
10
10
10
10
10
10
10
10
10
Order No.
0430300000
0430400000
0430500000
0430600000
0439000000
0430700000
0430800000
0430900000
0431000000
0431100000
0431200000
0431300000
0431400000
B
(M) = medium-blow (F) = fast-blow
1282250000 – 2012/2013
B.17
Test-disconnect terminals
PTR 2.5/4
2.5 mm²
PTR 2.5/4 O TNHE
2.5 mm²
Terminals, P-Series
With isolator
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
B
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 71 x 39.5
22 / 6
0.13...6
5.1 x 71 x 39.5
22 / 6
0.13...6
IEC 60947-7-1
IEC 60947-7-1
Rated data
Rated voltage of feed-through terminal
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Twin wire-end ferrule
Stripping length / Blade size
IEC
500
22
2.5
V
A
mm²
UL
CSA
600 (C)
600 (C)
24 (C)
24 (C)
AWG 26...10
AWG 26...10
6 kV / 3
A3 / V-0
IEC
500
22
2.5
CSA
6 kV / 3
A3 / V-0
r{ u#i
mm²
mm²
mm²
mm/-
UL
#
Rated connection
0.5...6
0.5...4 / 0.5...4
0.5...2.5
12 / 0.6 x 3.5 mm
Rated connection
0.5...6
0.5...4 / 0.5...4
0.5...2.5
12 / 0.6 x 3.5 mm
Note
Ordering data
Version
Dark beige Wemid
Blue Wemid
Without isolator, Dark beige Wemid
Note
Type
PTR 2.5/4
PTR 2.5/4 BL
Qty.
50
50
Order No.
1933950000
1933970000
Type
Qty.
PTR 2.5/4 O TNHE
Order No.
1933910000
50
For 4 mm² conductors, use ferrules with a cross-section-optimised plastic collar
(Order no. 9203630000).
For 4 mm² conductors, use ferrules with a cross-section-optimised plastic collar
(Order no. 9203630000).
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
Accessories
Pluggable cross-connection
2-pole
3-pole
4-pole
10-pole
20-/24-pole
End plate / Partition plate
End bracket
Screwdriver
Testing / Checking
Holder for cartridge fuse 5 x 20mm
Module connector (max, 250 V)
Disconnect plug
Identification systems
Note
B.18
Dark beige Wemid
PAP PTR2.5/4
Dark beige Wemid
ZEW 35
Standard
SDS 0.5X3.0X80
Test plug
PS 2.3 RT
400 V AC/DC, without LED
10 - 36 V AC/DC, red LED
140 - 250 V AC/DC, red LED
without fittings
with wire jumper
With 1N4007 diode
removable, as replacement for release lever
(see assortment in catalogue 7)
Marking tags
SIHA 3/G20
SIHA 3/G20/LD 10-36V
SIHA 3/G20/LD 140-250V
BEST
BEST/DRBR
BEST/D
TNST
current
24 A
24 A
24 A
24 A
24 A
Width
2.5 mm
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
20
1934680000
PAP PTR2.5/4
6 mm
20
9540000000
ZEW 35
1
9008320000
SDS 0.5X3.0X80
5.4 mm
20
0180400000
PS 2.3 RT
5.95 mm
5.95 mm
5.95 mm
25
25
25
7921560000
7921570000
7921600000
SIHA 3/G20
SIHA 3/G20/LD 10-36V
SIHA 3/G20/LD 140-250V
5.1 mm
5.1 mm
5.1 mm
50
50
50
1833100000
1878570000
1878560000
BEST
BEST/DRBR
BEST/D
50
1833090000
TNST
current
24 A
24 A
24 A
24 A
24 A
Width
2.5 mm
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
20
1934680000
6 mm
20
9540000000
1
9008320000
5.4 mm
20
0180400000
5.95 mm
5.95 mm
5.95 mm
25
25
25
7921560000
7921570000
7921600000
5.1 mm
5.1 mm
5.1 mm
50
50
50
1833100000
1878570000
1878560000
50
1833090000
DEK 5/5 / WS 10/5
DEK 5/5 / WS 10/5
Detailed information for working with twin ferrules can be found in the P Series
Accessories section.
Detailed information for working with twin ferrules can be found in the P Series
Accessories section.
1282250000 – 2012/2013
Test-disconnect terminals
PTR 2.5/4 3AN
2.5 mm²
PTR 2.5/4 3AN O TNHE
2.5 mm²
2.5 mm²
With isolator
5.1 x 85 x 39.5
22 / 6
0.13...6
5.1 x 85 x 39.5
22 / 6
0.13...6
IEC 60947-7-1
IEC
500
22
2.5
PTR 2.5/4 4AN
IEC
500
22
2.5
IEC 60947-7-1
UL
CSA
IEC
500
22
2.5
6 kV / 3
A3 / V-0
r{u#i
#
Rated connection
0.5...6
0.5...4 / 0.5...4
0.5...2.5
12 / 0.6 x 3.5 mm
Qty.
50
50
Order No.
1933980000
1933930000
UL
CSA
600 (C)
600 (C)
24 (C)
24 (C)
AWG 26...10
AWG 26...10
6 kV / 3
A3 / V-0
r{u#i
Rated connection
0.5...6
0.5...4 / 0.5...4
0.5...2.5
12 / 0.6 x 3.5 mm
Type
PTR 2.5/4/3AN
PTR 2.5/4/3AN BL
B
5.1 x 99 x 39.5
22 / 6
0.13...6
IEC 60947-7-1
UL
CSA
600 (C)
600 (C)
24 (C)
24 (C)
AWG 26...10
AWG 26...10
6 kV / 3
A3 / V-0
Terminals, P-Series
With isolator
Rated connection
0.5...6
0.5...4 / 0.5...4
0.5...2.5
12 / 0.6 x 3.5 mm
Type
Qty.
PTR 2.5/4/3AN O TNHE
Order No.
1933990000
50
Type
PTR 2.5/4/4AN
PTR 2.5/4/4AN BL
Qty.
50
50
Order No.
1933940000
1934000000
For 4 mm² conductors, use ferrules with a cross-section-optimised plastic collar
(Order no. 9203630000).
For 4 mm² conductors, use ferrules with a cross-section-optimised plastic collar
(Order no. 9203630000).
For 4 mm² conductors, use ferrules with a cross-section-optimised plastic collar
(Order no. 9203630000).
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
PAP PTR2.5/4/3AN
ZEW 35
current
24 A
24 A
24 A
24 A
24 A
Width
2.5 mm
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
20
1934690000
PAP PTR2.5/4/3AN
6 mm
20
9540000000
ZEW 35
1
9008320000
SDS 0.5X3.0X80
5.4 mm
20
0180400000
PS 2.3 RT
5.95 mm
5.95 mm
5.95 mm
25
25
25
7921560000
7921570000
7921600000
SIHA 3/G20
SIHA 3/G20/LD 10-36V
SIHA 3/G20/LD 140-250V
5.1 mm
5.1 mm
5.1 mm
50
50
50
1833100000
1878570000
1878560000
BEST
BEST/DRBR
BEST/D
50
1833090000
TNST
SDS 0.5X3.0X80
PS 2.3 RT
SIHA 3/G20
SIHA 3/G20/LD 10-36V
SIHA 3/G20/LD 140-250V
BEST
BEST/DRBR
BEST/D
TNST
current
24 A
24 A
24 A
24 A
24 A
Width
2.5 mm
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
20
1934690000
PAP PTR2.5/4/4AN
6 mm
20
9540000000
ZEW 35
1
9008320000
SDS 0.5X3.0X80
5.4 mm
20
0180400000
PS 2.3 RT
5.95 mm
5.95 mm
5.95 mm
25
25
25
7921560000
7921570000
7921600000
SIHA 3/G20
SIHA 3/G20/LD 10-36V
SIHA 3/G20/LD 140-250V
5.1 mm
5.1 mm
5.1 mm
50
50
50
1833100000
1878570000
1878560000
BEST
BEST/DRBR
BEST/D
50
1833090000
TNST
current
24 A
24 A
24 A
24 A
24 A
Width
2.5 mm
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
20
1934700000
6 mm
20
9540000000
1
9008320000
5.4 mm
20
0180400000
5.95 mm
5.95 mm
5.95 mm
25
25
25
7921560000
7921570000
7921600000
5.1 mm
5.1 mm
5.1 mm
50
50
50
1833100000
1878570000
1878560000
50
1833090000
DEK 5/5 / WS 10/5
DEK 5/5 / WS 10/5
DEK 5/5 / WS 10/5
Detailed information for working with twin ferrules can be found in the P Series
Accessories section.
Detailed information for working with twin ferrules can be found in the P Series
Accessories section.
Detailed information for working with twin ferrules can be found in the P Series
Accessories section.
1282250000 – 2012/2013
B.19
Test-disconnect terminals
2.5 mm²
Terminals, P-Series
PTR 2.5/4 4AN O TNHE
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
B
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 99 x 39.5
22 / 6
0.13...6
IEC 60947-7-1
Rated data
Rated voltage of feed-through terminal
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Twin wire-end ferrule
Stripping length / Blade size
IEC
500
22
2.5
V
A
mm²
UL
CSA
6 kV / 3
A3 / V-0
#
mm²
mm²
mm²
mm/-
Rated connection
0.5...6
0.5...4 / 0.5...4
0.5...2.5
12 / 0.6 x 3.5 mm
Note
Ordering data
Version
Dark beige Wemid
Blue Wemid
Without isolator, Dark beige Wemid
Note
Type
Qty.
PTR 2.5/4/4AN O TNHE
Order No.
1933890000
50
For 4 mm² conductors, use ferrules with a cross-section-optimised plastic collar
(Order no. 9203630000).
Accessories
Pluggable cross-connection
2-pole
3-pole
4-pole
10-pole
20-/24-pole
End plate / Partition plate
End bracket
Screwdriver
Testing / Checking
Holder for cartridge fuse 5 x 20mm
Module connector (max, 250 V)
Disconnect plug
Identification systems
Note
B.20
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
Dark beige Wemid
PAP PTR2.5/4/4AN
Dark beige Wemid
ZEW 35
Standard
SDS 0.5X3.0X80
Test plug
PS 2.3 RT
400 V AC/DC, without LED
10 - 36 V AC/DC, red LED
140 - 250 V AC/DC, red LED
without fittings
with wire jumper
With 1N4007 diode
removable, as replacement for release lever
(see assortment in catalogue 7)
Marking tags
SIHA 3/G20
SIHA 3/G20/LD 10-36V
SIHA 3/G20/LD 140-250V
BEST
BEST/DRBR
BEST/D
TNST
current
24 A
24 A
24 A
24 A
24 A
Width
2.5 mm
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
20
1934700000
6 mm
20
9540000000
1
9008320000
5.4 mm
20
0180400000
5.95 mm
5.95 mm
5.95 mm
25
25
25
7921560000
7921570000
7921600000
5.1 mm
5.1 mm
5.1 mm
50
50
50
1833100000
1878570000
1878560000
50
1833090000
DEK 5/5 / WS 10/5
Detailed information for working with twin ferrules can be found in the P Series
Accessories section.
1282250000 – 2012/2013
Test-disconnect terminals
4 mm²
PDL 4/TR/DU/PE O TNHE
4 mm²
Terminals, P-Series
PDL 4/TR/DU O TNHE
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
Rated data
Rated voltage of feed-through terminal
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Twin wire-end ferrule
Stripping length / Blade size
5.1 x 100 x 49.5
/4
0.08...4
5.1 x 100 x 49.5
/4
0.08...4
IEC 60947-7-1
IEC 60947-7-1 (-7-2)
IEC
400
20
4
V
A
mm²
UL
CSA
150 (C)
300 (B)
17 (C)
6.3 (B)
AWG 28...10
AWG 28...10
4 kV / 3
A3 / V-0
IEC
400
20
4
r{u#
mm²
mm²
mm²
mm/-
PE
B
UL
CSA
300 (D)
300 (B)
10 (D)
6.3 (B)
AWG 28...10
AWG 28...10
4 kV / 3
A3 / V-0
r{u#
Rated connection
0.5...4 / 1.5...4
0.5...4 / 0.5...4
0.5...1.5
12 / 3.0 x 0.5 mm
Rated connection
0.5...4 / 1.5...4
0.5...4 / 0.5...4
0.5...1.5
12 / 3.0 x 0.5 mm
Note
Ordering data
Version
Dark beige Wemid
Without isolator, Dark beige Wemid
Note
Type
Qty.
PDL 4/TR/DU O TNHE
Order No.
1899210000
50
Type
Qty.
PDL 4/TR/DU/PE O TNHE
Order No.
1899220000
50
...without disconnecting lever. Suitable for the SIHA 3 fuse holder with G fuse, for
the BEST component plug and for the TNST isolating plug.
...without disconnecting lever. Suitable for the SIHA 3 fuse holder with G fuse, for
the BEST component plug and for the TNST isolating plug.
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
Accessories
Pluggable cross-connection
End plate / Partition plate
End bracket
Screwdriver
Holder for cartridge fuse 5 x 20mm
Module connector (max, 250 V)
Disconnect plug
Dark beige Wemid
PAP PDL4
current
24 A
24 A
24 A
24 A
24 A
Width
1.5 mm
Dark beige Wemid
ZEW 35/2
8 mm
2-pole
3-pole
4-pole
10-pole
20-/24-pole
Standard
400 V AC/DC, without LED
10 - 36 V AC/DC, red LED
140 - 250 V AC/DC, red LED
without fittings
with wire jumper
With 1N4007 diode
removable, as replacement for release lever
Identification systems
Note
1282250000 – 2012/2013
(see assortment in catalogue 7)
Marking tags
BEST
BEST/DRBR
BEST/D
TNST
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
20
1883210000
20
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
PAP PDL4
current
24 A
24 A
24 A
24 A
24 A
Width
1.5 mm
20
1883210000
8630740000
ZEW 35/2
8 mm
20
8630740000
1
9008320000
SDS 0.5X3.0X80
1
9008320000
5.95 mm
5.95 mm
5.95 mm
25
25
25
7921560000
7921570000
7921600000
SIHA 3/G20
SIHA 3/G20/LD 10-36V
SIHA 3/G20/LD 140-250V
5.95 mm
5.95 mm
5.95 mm
25
25
25
7921560000
7921570000
7921600000
5.1 mm
5.1 mm
5.1 mm
50
50
50
1833100000
1878570000
1878560000
BEST
BEST/DRBR
BEST/D
5.1 mm
5.1 mm
5.1 mm
50
50
50
1833100000
1878570000
1878560000
50
1833090000
TNST
50
1833090000
SDS 0.5X3.0X80
SIHA 3/G20
SIHA 3/G20/LD 10-36V
SIHA 3/G20/LD 140-250V
Qty.
60
60
60
20
20
DEK 5/5 / WS 10/5
DEK 5/5 / WS 10/5
Detailed information for working with twin ferrules can be found in the P Series
Accessories section.
Detailed information for working with twin ferrules can be found in the P Series
Accessories section.
B.21
Test-disconnect terminals
PDL 4/TR/DU
4 mm²
Terminals, P-Series
With isolator
PDL 4/TR/DU/PE
4 mm²
With isolator
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
B
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
Rated data
Rated voltage of feed-through terminal
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Twin wire-end ferrule
Stripping length / Blade size
5.1 x 100 x 49.5
/4
0.08...4
5.1 x 100 x 49.5
/4
0.08...4
IEC 60947-7-1
IEC 60947-7-1 (-7-2)
IEC
400
20
4
V
A
mm²
UL
CSA
150 (C)
300 (B)
17 (C)
20 (B)
AWG 28...10
AWG 28...10
4 kV / 3
A3 / V-0
IEC
400
20
4
r{u#
mm²
mm²
mm²
mm/-
PE
UL
CSA
300 (D)
300 (B)
10 (D)
20 (B)
AWG 28...10
AWG 28...10
4 kV / 3
A3 / V-0
r{u#
Rated connection
0.5...4 / 1.5...4
0.5...4 / 0.5...4
0.5...1.5
12 / 3.0 x 0.5 mm
Rated connection
0.5...4 / 1.5...4
0.5...4 / 0.5...4
0.5...1.5
12 / 3.0 x 0.5 mm
Note
Ordering data
Version
Dark beige Wemid
Without isolator, Dark beige Wemid
Note
Type
PDL 4/TR/DU
Qty.
50
Order No.
1899190000
Without isolator: PDL 4 TR/DU O TNHE
Order no.: 1899210000
Type
PDL 4/TR/DU/PE
Qty.
50
Order No.
1899200000
Without isolator: PDL 4 TR/DU/PE O TNHE
Order no.: 1899220000
Accessories
Pluggable cross-connection
End plate / Partition plate
End bracket
Screwdriver
Holder for cartridge fuse 5 x 20mm
Module connector (max, 250 V)
Disconnect plug
Identification systems
Note
B.22
Dark beige Wemid
PAP PDL4
current
24 A
24 A
24 A
24 A
24 A
Width
1.5 mm
Dark beige Wemid
ZEW 35/2
8 mm
2-pole
3-pole
4-pole
10-pole
20-/24-pole
Standard
400 V AC/DC, without LED
10 - 36 V AC/DC, red LED
140 - 250 V AC/DC, red LED
without fittings
with wire jumper
With 1N4007 diode
removable, as replacement for release lever
(see assortment in catalogue 7)
Marking tags
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
BEST
BEST/DRBR
BEST/D
TNST
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
20
1883210000
20
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
PAP PDL4
current
24 A
24 A
24 A
24 A
24 A
Width
1.5 mm
20
1883210000
8630740000
ZEW 35/2
8 mm
20
8630740000
1
9008320000
SDS 0.5X3.0X80
1
9008320000
5.95 mm
5.95 mm
5.95 mm
25
25
25
7921560000
7921570000
7921600000
SIHA 3/G20
SIHA 3/G20/LD 10-36V
SIHA 3/G20/LD 140-250V
5.95 mm
5.95 mm
5.95 mm
25
25
25
7921560000
7921570000
7921600000
5.1 mm
5.1 mm
5.1 mm
50
50
50
1833100000
1878570000
1878560000
BEST
BEST/DRBR
BEST/D
5.1 mm
5.1 mm
5.1 mm
50
50
50
1833100000
1878570000
1878560000
50
1833090000
TNST
50
1833090000
SDS 0.5X3.0X80
SIHA 3/G20
SIHA 3/G20/LD 10-36V
SIHA 3/G20/LD 140-250V
Qty.
60
60
60
20
20
DEK 5/5 / WS 10/5
DEK 5/5 / WS 10/5
Detailed information for working with twin ferrules can be found in the P Series
Accessories section.
Detailed information for working with twin ferrules can be found in the P Series
Accessories section.
1282250000 – 2012/2013
Test-disconnect terminals
10 mm²
PTD 6/10
10 mm²
Terminals, P-Series
PTL 6/10
NEW
NEW
8.1 x 82 x 40.35
/ 10
1.5...10
8.1 x 82 x 40.35
/ 10
1.5...10
IEC 60947-7-1
IEC 60947-7-1
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
Rated data
Rated voltage of feed-through terminal
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Twin wire-end ferrule
Stripping length / Blade size
V
A
mm²
mm²
mm²
mm²
mm/-
IEC
800
57
10
UL
CSA
600 (C)
45 (C)
AWG 16...16
8 kV / 3
A5 / V-0
IEC
800
57
10
{#
{
14 / 0.6 x 3.5 mm
14 / 0.6 x 3.5 mm
Rated connection
1.5...6
1.5...10 / 1.5...10
B
UL
CSA
600 (C)
45 (C)
AWG 16...16
8 kV / 3
A5 / V-0
Rated connection
1.5...6
1.5...10 / 1.5...10
Note
Ordering data
Version
Dark beige Wemid
Type
PTL 6/10/STB
Dark beige Wemid
black
Type
PAP PTL/PSI 6/10
PAP PTL/PSI 6/10 SW
Dark beige Wemid
ZEW 35
Qty.
50
Note
Order No.
1084780000
Type
PTD 6/10/STB
Qty.
50
Order No.
1084790000
Accessories
End plate / Partition plate
End bracket
Screwdriver
Miscellaneous accessories
Threaded bushing
Screwable cross-connection
Testing / Checking
Identification systems
Standard
Short-circuit plug, 2-pole
Standard
2-pole
3-pole
4-pole
10-pole
Socket - blue
Socket - yellow
Socket - green
Socket - magenta
Socket
Socket - blue
Socket - yellow
Socket - green
Socket - magenta
Socket
(see assortment in catalogue 7)
Marking tags
Width
2.5 mm
2.5 mm
Qty.
20
20
Order No.
1165320000
1165330000
Type
PAP PTL/PSI 6/10
PAP PTL/PSI 6/10 SW
6 mm
20
9540000000
ZEW 35
1
9008320000
SDS 0.5X3.0X80
20
0270960000
QS 2/8/4
50
1255010000
GWHUE M3 WTL6
50
50
50
20
1052360000
1054760000
1054860000
1052260000
WQV 6/2
WQV 6/3
WQV 6/4
WQV 6/10
50
50
50
50
500
50
50
50
50
50
1936290000
1936240000
1936250000
1936260000
2012420000
1847790000
1847760000
1847770000
1847780000
1847740000
STB 21.6/45 BL
STB 21.6/45 GE
STB 21.6/45 GN
STB 21.6/45 VI
STB 14/D6/4/M3 SAK10
STB 36.8/IH/BL WTL6/1
STB 36.8/IH/GE WTL6/1
STB 36.8/IH/GN WTL6/1
STB 36.8/IH/VI WTL6/1
STB 36.8/IH/DB WTL6/1
SDS 0.5X3.0X80
QS 2/8/4
GWHUE M3 WTL6
WQV 6/2
WQV 6/3
WQV 6/4
WQV 6/10
STB 21.6/45 BL
STB 21.6/45 GE
STB 21.6/45 GN
STB 21.6/45 VI
STB 14/D6/4/M3 SAK10
STB 36.8/IH/BL WTL6/1
STB 36.8/IH/GE WTL6/1
STB 36.8/IH/GN WTL6/1
STB 36.8/IH/VI WTL6/1
STB 36.8/IH/DB WTL6/1
DEK 5/8
12 mm
current
57 A
57 A
57 A
57 A
Width
6.1 mm
6.1 mm
6.1 mm
6.1 mm
6 mm
6 mm
6 mm
6 mm
6 mm
Width
2.5 mm
2.5 mm
Qty.
20
20
Order No.
1165320000
1165330000
6 mm
20
9540000000
1
9008320000
20
0270960000
50
1255010000
50
50
50
20
1052360000
1054760000
1054860000
1052260000
50
50
50
50
500
50
50
50
50
50
1936290000
1936240000
1936250000
1936260000
2012420000
1847790000
1847760000
1847770000
1847780000
1847740000
12 mm
current
57 A
57 A
57 A
57 A
Width
6.1 mm
6.1 mm
6.1 mm
6.1 mm
6 mm
6 mm
6 mm
6 mm
6 mm
DEK 5/8
Note
1282250000 – 2012/2013
B.23
Terminals, P-Series
Actuator and installation terminals – overview
Distribution terminal blocks
for simple maintenance
ä
A cost-effective solution for building and facility installations:
with “PUSH IN“ connections
B
This addition to Weidmüller‘s comprehensive line of “PUSH IN“ terminal
block products speeds up your installation while also providing better
power specifications in a smaller size.
It offers key advantages wherever solid wires or wires with ferrules are
being connected.
Quick and safe
A universal wire connection range from 2.5 to
16 mm². Solid and flexible conductors with
wire-end ferrules can be connected using this
connection system.
PUSH IN with screw combination
The large cross-section of screw terminals can
be combined with PUSH IN terminals.
B.24
1282250000 – 2012/2013
Increased flexibility
Simple to swap-out PDL terminals from the
group when connected with the PDU 16S.
Terminals, P-Series
Actuator and installation terminals – overview
B
Simple handling
The asymmetric design of the terminal enables
the neutral-wire busbar to be bypassed.
1282250000 – 2012/2013
B.25
Actuator and installation terminals
PDU 16S
Terminals, P-Series
Feed-through terminals
16 mm²
NEW
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
B
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
12.1 x 96.5 x 48
/ 16
2.5...16
Technical data
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Twin wire-end ferrule
Stripping length / Blade size
V
A
mm²
IEC
800
76
16
UL
CSA
8 kV / 3
B6 / V-0
mm²
mm²
mm²
mm/-
Rated connection
2.5...16
2.5...16 / 2.5...16
18 / 1.0 x 5.5 mm
Note
Ordering data
Version
Dark beige Wemid
Type
PDU 16S
Qty.
25
Order No.
1139580000
Note
Accessories
Pluggable cross-connection
End plate / Partition plate
End bracket
Screwdriver
Cover
Identification systems
Type
ZQV 16/2
current
76 A
Qty.
25
Order No.
1739690000
Dark beige Wemid
PAP PDU16S
Width
2.7 mm
10
1139910000
Dark beige Wemid
ZEW 35
6 mm
20
9540000000
1
1274680000
80
1916170000
2-pole
Standard
SDIS SL 1.0X4.5X125
With lightning flash symbol
PAD 16/4
(see assortment in catalogue 7)
Marking tags
WS 12/8
7.3 mm
Note
B.26
1282250000 – 2012/2013
Actuator and installation terminals
16 mm²
Terminals, P-Series
PPE 16S
PE terminals
NEW
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
12.1 x 96.5 x 48
/ 16
2.5...16
PE
B
IEC 60947-7-2
Rated data
Rated cross-section
Rated voltage to adjoining terminal
Rated impulse withstand voltage to adjacent terminal
Rated short-time current
Pollution severity
Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Blade size
mm²
V
kV
IEC
16
800
8
UL
CSA
1920 A (16 mm²)
3
V-0
mm²
mm²
Rated connection
2.5...16
2.5...16 / 2.5...16
1.0 x 5.5 mm
Note
Ordering data
Version
green/yellow Wemid
Type
PPE 16S
Qty.
10
Order No.
1139570000
Note
Accessories
Pluggable cross-connection
End plate / Partition plate
End bracket
Screwdriver
Cover
Identification systems
Type
ZQV 16/2
current
76 A
Qty.
25
Order No.
1739690000
Dark beige Wemid
PAP PDU16S
Width
2.7 mm
10
1139910000
Dark beige Wemid
ZEW 35
6 mm
20
9540000000
1
1274680000
80
1916170000
2-pole
Standard
SDIS SL 1.0X4.5X125
With lightning flash symbol
PAD 16/4
(see assortment in catalogue 7)
Marking tags
WS 10/12
7.3 mm
Note
1282250000 – 2012/2013
B.27
Actuator and installation terminals
PNT 2.5/4
4 mm²
PNT 6/10
10 mm²
Terminals, P-Series
Neutral conductor disconnect terminals
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
B
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 63.5 x 48.5
/6
0.08...6
NT
V
A
mm²
IEC
250
32
4
NT
IEC 60947-7-1
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Twin wire-end ferrule
Stripping length / Blade size
8.1 x 72.5 x 46.5
/ 10
1.5...10
UL
CSA
IEC
250
41
10
UL
4 kV / 3
A3 / V-0
8 kV / 3
A4 / V-0
u#
mm²
mm²
mm²
mm/-
CSA
u#i
Rated connection
0.5...6
2.5...4 / 0.5...4
...1.5
12 / 3.0 x 0.5 mm
Rated connection
1.5...6
1.5...10 / 1.5...10
14 / 0.6 x 3.5 mm
Note
Ordering data
Version
Blue Wemid
Type
PNT 2.5/4
2-pole
3-pole
4-pole
10-pole
20-/24-pole
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
Qty.
50
Note
Order No.
1896360000
Type
PNT 6/10
Type
ZQV 6N/2
ZQV 6N/3
ZQV 6N/4
Qty.
25
Order No.
1896370000
Accessories
Pluggable cross-connection
Support bracket for 10 x 3 (required every 20 cm)
Blue Wemid
For a vertical installation position
End bracket
Screwdriver
Busbar 10 x 3 (140 A)
Dark beige Wemid
Standard
OK, Busbar up to OK, TS35 = 25.5 mm
Clamping yoke for power supply to 10 x 3 busbars
Rigid / flexible 0.5 - 6 / 4 mm²
Rigid / flexible 6 - 16 mm²
Flexible 16 - 35 mm²
Identification systems
(see assortment in catalogue 7)
Marking tags
PHP PNT 2.5/4
PHP PNT 2.5/4 SO
ZEW 35
current
24 A
24 A
24 A
24 A
24 A
Width
3 mm
3 mm
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
ZQV 6N/20
20
20
1896390000
1916790000
PHP PNT 6/10
PHP PNT 6/10 SO
Width
3 mm
3 mm
6 mm
20
9540000000
ZEW 35
6 mm
1
9008320000
SDS 0.5X3.0X80
SDS 0.5X3.0X80
current
Qty.
60
60
60
Order No.
1906210000
1906220000
1906230000
20
1906240000
10
10
1896100000
1919710000
20
9540000000
1
9008320000
SSCH 10X3X1000 CU/SN
10 mm
1
0348900000
SSCH 10X3X1000 CU/SN
10 mm
1
0348900000
ZF 4 S BL
ZB 16K BL
ZB 35/M6X16
6.1 mm
10 mm
14 mm
50
50
20
1814660000
0502880000
0266500000
ZF 4 S BL
ZB 16K BL
ZB 35/M6X16
6.1 mm
10 mm
14 mm
50
50
20
1814660000
0502880000
0266500000
DEK 5/5 / WS 10/5
WS 10/8
Note
B.28
1282250000 – 2012/2013
Actuator and installation terminals
16 mm²
Terminals, P-Series
PNT 16
12.1 x 80.5 x 50
/ 16
2.5...16
IEC
400
76
16
NT
UL
B
CSA
8 kV / 3
B6 / V-0
u#i
Rated connection
2.5...16
2.5...16 / 2.5...16
18 / 1.0 x 5.5 mm
Type
PNT 16
Type
Qty.
10
Order No.
1896350000
current
Qty.
PHP PNT16
PHP PNT16 SO
Width
3 mm
3 mm
10
10
1896380000
1919690000
ZEW 35
6 mm
20
9540000000
1
1274680000
SDIS SL 1.0X4.5X125
Order No.
SSCH 10X3X1000 CU/SN
10 mm
1
0348900000
ZF 4 S BL
ZB 16K BL
ZB 35/M6X16
6.1 mm
10 mm
14 mm
50
50
20
1814660000
0502880000
0266500000
WS 10/12
1282250000 – 2012/2013
B.29
Actuator and installation terminals
PDL 4 S/NT/L/PE
4 mm²
PDL 4 S/L/L
4 mm²
Terminals, P-Series
Distribution terminals for 10 x 3 mm
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
B
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 100 x 48.5
36 / 4
0.08...4
NT
L
PE
IEC
400
32
4
V
A
mm²
L
UL
CSA
IEC
400
32
4
UL
6 kV / 3
A3 / V-0
mm²
mm²
mm²
mm/-
Dark beige Wemid
Type
PDL 4 S/NT/L/PE
CSA
6 kV / 3
A3 / V-0
#
Rated connection
0.5...4 / 1.5...4
0.5...4 / 0.5...4
0.5...1.5
12 / 3.0 x 0.5 mm
L
IEC 60947-7-1
IEC 60947-7-1 (-7-2)
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Twin wire-end ferrule
Stripping length / Blade size
5.1 x 100 x 48.5
36 / 4
0.08...4
#i
Rated connection
0.5...4 / 1.5...4
0.5...4 / 0.5...4
0.5...1.5
12 / 3.0 x 0.5 mm
Note
Ordering data
Version
Qty.
50
Note
Order No.
1837060000
Type
PDL 4 S/L/L
Qty.
50
Order No.
1837030000
Accessories
Pluggable cross-connection
End plate / Partition plate
2-pole
3-pole
4-pole
10-pole
Dark beige Wemid
Support bracket for 10 x 3 (required every 20 cm)
Blue Wemid
For a vertical installation position
End bracket
Screwdriver
Busbar 10 x 3 (140 A)
Dark beige Wemid
Standard
OK, Busbar up to OK, TS35 = 25.5 mm
Clamping yoke for power supply to 10 x 3 busbars
Rigid / flexible 0.5 - 6 / 4 mm²
Rigid / flexible 6 - 16 mm²
Flexible 16 - 35 mm²
Identification systems
(see assortment in catalogue 7)
Marking tags
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
Qty.
60
60
60
20
Order No.
1608860000
1608870000
1608880000
1608940000
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
PAP PDL4S
current
24 A
24 A
24 A
24 A
Width
1.5 mm
20
1837070000
PHP PDL
PHP PDL SO
3 mm
3 mm
20
20
ZEW 35/2
8 mm
SDIS 0.4X2.5X75
Qty.
60
60
60
20
Order No.
1608860000
1608870000
1608880000
1608940000
PAP PDL4S
current
24 A
24 A
24 A
24 A
Width
1.5 mm
20
1837070000
1837090000
1837080000
PHP PDL
PHP PDL SO
3 mm
3 mm
20
20
1837090000
1837080000
20
8630740000
ZEW 35/2
8 mm
20
8630740000
1
9008370000
SDIS 0.4X2.5X75
1
9008370000
SSCH 10X3X1000 CU/SN
10 mm
1
0348900000
SSCH 10X3X1000 CU/SN
10 mm
1
0348900000
ZF 4 S BL
ZB 16 ZKSC
ZB 35/M6X16
6.1 mm
10 mm
14 mm
50
50
20
1814660000
0316600000
0266500000
ZF 4 S BL
ZB 16 ZKSC
ZB 35/M6X16
6.1 mm
10 mm
14 mm
50
50
20
1814660000
0316600000
0266500000
DEK 5/5
DEK 5/5
Note
B.30
1282250000 – 2012/2013
Actuator and installation terminals
4 mm²
PDL 4 S/N/L/PE
4 mm²
PDL 4 S/N/L
4 mm²
Terminals, P-Series
PDL 4 S/L
5.1 x 100 x 48.5
36 / 4
0.08...4
L
IEC 60947-7-1
IEC
400
32
4
5.1 x 100 x 48.5
36 / 4
0.08...4
N
L
PE
IEC 60947-7-1 (-7-2)
UL
CSA
IEC
400
32
4
CSA
IEC
400
32
4
Order No.
1847610000
Type
PDL 4 S/N/L/PE
Qty.
60
60
60
20
Order No.
1608860000
1608870000
1608880000
1608940000
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
PAP PDL4S
current
24 A
24 A
24 A
24 A
Width
1.5 mm
20
1837070000
PHP PDL
PHP PDL SO
3 mm
3 mm
20
20
ZEW 35/2
8 mm
CSA
Rated connection
0.5...4 / 1.5...4
0.5...4 / 0.5...4
0.5...1.5
12 / 3.0 x 0.5 mm
Qty.
50
Order No.
1837050000
Type
PDL 4 S/N/L
Qty.
60
60
60
20
Order No.
1608860000
1608870000
1608880000
1608940000
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
PAP PDL4S
current
24 A
24 A
24 A
24 A
Width
1.5 mm
20
1837070000
1837090000
1837080000
PHP PDL
PHP PDL SO
3 mm
3 mm
20
20
20
8630740000
ZEW 35/2
8 mm
1
9008370000
SDIS 0.4X2.5X75
Qty.
50
Order No.
1847630000
Qty.
60
60
60
20
Order No.
1608860000
1608870000
1608880000
1608940000
PAP PDL4S
current
24 A
24 A
24 A
24 A
Width
1.5 mm
20
1837070000
1837090000
1837080000
PHP PDL
PHP PDL SO
3 mm
3 mm
20
20
1837090000
1837080000
20
8630740000
ZEW 35/2
8 mm
20
8630740000
1
9008370000
SDIS 0.4X2.5X75
1
9008370000
SSCH 10X3X1000 CU/SN
10 mm
1
0348900000
SSCH 10X3X1000 CU/SN
10 mm
1
0348900000
SSCH 10X3X1000 CU/SN
10 mm
1
0348900000
ZF 4 S BL
ZB 16 ZKSC
ZB 35/M6X16
6.1 mm
10 mm
14 mm
50
50
20
1814660000
0316600000
0266500000
ZF 4 S BL
ZB 16 ZKSC
ZB 35/M6X16
6.1 mm
10 mm
14 mm
50
50
20
1814660000
0316600000
0266500000
ZF 4 S BL
ZB 16 ZKSC
ZB 35/M6X16
6.1 mm
10 mm
14 mm
50
50
20
1814660000
0316600000
0266500000
DEK 5/5
1282250000 – 2012/2013
DEK 5/5
B
#i
Rated connection
0.5...4 / 1.5...4
0.5...4 / 0.5...4
0.5...1.5
12 / 3.0 x 0.5 mm
Qty.
50
L
6 kV / 3
A3 / V-0
#i
Rated connection
0.5...4 / 1.5...4
0.5...4 / 0.5...4
0.5...1.5
12 / 3.0 x 0.5 mm
SDIS 0.4X2.5X75
UL
6 kV / 3
A3 / V-0
#i
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
N
IEC 60947-7-1
UL
6 kV / 3
A3 / V-0
Type
PDL 4 S/L
5.1 x 100 x 48.5
36 / 4
0.08...4
DEK 5/5
B.31
Actuator and installation terminals
PDL 4 S/N
4 mm²
PDL 4 S/L/L/PE
4 mm²
Terminals, P-Series
Distribution terminals for 10 x 3 mm
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
B
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 100 x 48.5
36 / 4
0.08...4
N
V
A
mm²
IEC
400
32
4
L
UL
CSA
IEC
400
32
4
UL
6 kV / 3
A3 / V-0
CSA
6 kV / 3
A3 / V-0
#i
mm²
mm²
mm²
mm/-
L
PE
IEC 60947-7-1 (-7-2)
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Twin wire-end ferrule
Stripping length / Blade size
5.1 x 100 x 48.5
36 / 4
0.08...4
#i
Rated connection
0.5...4 / 1.5...4
0.5...4 / 0.5...4
0.5...1.5
12 / 3.0 x 0.5 mm
Rated connection
0.5...4 / 1.5...4
0.5...4 / 0.5...4
0.5...1.5
12 / 3.0 x 0.5 mm
Note
Ordering data
Version
Dark beige Wemid
Type
PDL 4 S/N
Qty.
50
Note
Order No.
1847620000
Type
PDL 4 S/L/L/PE
Qty.
50
Order No.
1837040000
Accessories
Pluggable cross-connection
End plate / Partition plate
2-pole
3-pole
4-pole
10-pole
Dark beige Wemid
Support bracket for 10 x 3 (required every 20 cm)
Blue Wemid
For a vertical installation position
End bracket
Screwdriver
Busbar 10 x 3 (140 A)
Dark beige Wemid
Standard
OK, Busbar up to OK, TS35 = 25.5 mm
Clamping yoke for power supply to 10 x 3 busbars
Rigid / flexible 0.5 - 6 / 4 mm²
Rigid / flexible 6 - 16 mm²
Flexible 16 - 35 mm²
Identification systems
(see assortment in catalogue 7)
Marking tags
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
Qty.
60
60
60
20
Order No.
1608860000
1608870000
1608880000
1608940000
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
PAP PDL4S
current
24 A
24 A
24 A
24 A
Width
1.5 mm
20
1837070000
PHP PDL
PHP PDL SO
3 mm
3 mm
20
20
ZEW 35/2
8 mm
SDIS 0.4X2.5X75
Qty.
60
60
60
20
Order No.
1608860000
1608870000
1608880000
1608940000
PAP PDL4S
current
24 A
24 A
24 A
24 A
Width
1.5 mm
20
1837070000
1837090000
1837080000
PHP PDL
PHP PDL SO
3 mm
3 mm
20
20
1837090000
1837080000
20
8630740000
ZEW 35/2
8 mm
20
8630740000
1
9008370000
SDIS 0.4X2.5X75
1
9008370000
SSCH 10X3X1000 CU/SN
10 mm
1
0348900000
SSCH 10X3X1000 CU/SN
10 mm
1
0348900000
ZF 4 S BL
ZB 16 ZKSC
ZB 35/M6X16
6.1 mm
10 mm
14 mm
50
50
20
1814660000
0316600000
0266500000
ZF 4 S BL
ZB 16 ZKSC
ZB 35/M6X16
6.1 mm
10 mm
14 mm
50
50
20
1814660000
0316600000
0266500000
DEK 5/5
DEK 5/5
Note
B.32
1282250000 – 2012/2013
Actuator and installation terminals
PDL 4 NT/L/PE
4 mm²
PDL 4 NT/L
4 mm²
Terminals, P-Series
Modular distribution terminals
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
5.1 x 100 x 49.1
/4
0.08...4
NT
L
PE
5.1 x 100 x 49.1
/4
0.08...4
NT
L
B
Technical data
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Twin wire-end ferrule
Stripping length / Blade size
V
A
mm²
IEC
400
20
4
UL
CSA
300 (D)
300 (B)
10 (D)
20 (B)
AWG 28...10
AWG 28...10
6 kV / 3
A3 / V-0
IEC
400
20
4
r{u#
mm²
mm²
mm²
mm/-
UL
CSA
150 (C)
300 (B)
17 (C)
20 (B)
AWG 28...10
AWG 28...10
6 kV / 3
A3 / V-0
r{u#
Rated connection
0.5...4 / 1.5...4
0.5...4 / 0.5...4
0.5...1.5
12 / 3.0 x 0.5 mm
Rated connection
0.5...4 / 1.5...4
0.5...4 / 0.5...4
0.5...1.5
12 / 3.0 x 0.5 mm
Note
Ordering data
Version
Dark beige Wemid
Type
PDL 4/NT/L/PE
Qty.
50
Note
Order No.
1882620000
Type
PDL 4/NT/L
Qty.
50
Order No.
1882600000
Accessories
Pluggable cross-connection
End plate / Partition plate
End bracket
Screwdriver
Identification systems
Dark beige Wemid
PAP PDL4
current
24 A
24 A
24 A
24 A
Width
1.5 mm
Dark beige Wemid
ZEW 35/2
8 mm
2-pole
3-pole
4-pole
10-pole
Standard
(see assortment in catalogue 7)
Marking tags
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
SDIS 0.4X2.5X75
DEK 5/5
Qty.
60
60
60
20
Order No.
1608860000
1608870000
1608880000
1608940000
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
20
1883210000
20
1
Qty.
60
60
60
20
Order No.
1608860000
1608870000
1608880000
1608940000
PAP PDL4
current
24 A
24 A
24 A
24 A
Width
1.5 mm
20
1883210000
8630740000
ZEW 35/2
8 mm
20
8630740000
9008370000
SDIS 0.4X2.5X75
1
9008370000
DEK 5/5
Note
1282250000 – 2012/2013
B.33
Actuator and installation terminals
PDL 4 N/L/PE
4 mm²
PDL 4 L/L/PE
4 mm²
Terminals, P-Series
Modular distribution terminals
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
B
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
5.1 x 100 x 49.1
/4
0.08...4
N
L
PE
5.1 x 100 x 49.5
/4
0.08...4
L
L
PE
Technical data
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Twin wire-end ferrule
Stripping length / Blade size
V
A
mm²
IEC
400
32
4
UL
CSA
300 (D)
300 (B)
10 (D)
20 (B)
AWG 28...10
AWG 28...10
6 kV / 3
A3 / V-0
IEC
400
32
4
r{u#
mm²
mm²
mm²
mm/-
UL
CSA
300 (D)
300 (B)
10 (D)
20 (B)
AWG 28...10
AWG 28...10
6 kV / 3
A3 / V-0
r{u#
Rated connection
0.5...4 / 1.5...4
0.5...4 / 0.5...4
0.5...1.5
12 / 3.0 x 0.5 mm
Rated connection
0.5...4 / 1.5...4
0.5...4 / 0.5...4
0.5...1.5
12 / 3.0 x 0.5 mm
Note
Ordering data
Version
Dark beige Wemid
Type
PDL 4/N/L/PE
Qty.
50
Note
Order No.
1899180000
Type
PDL 4/L/L/PE
Qty.
50
Order No.
1882610000
Accessories
Pluggable cross-connection
End plate / Partition plate
End bracket
Screwdriver
Identification systems
Dark beige Wemid
PAP PDL4
current
24 A
24 A
24 A
24 A
Width
1.5 mm
Dark beige Wemid
ZEW 35/2
8 mm
2-pole
3-pole
4-pole
10-pole
Standard
(see assortment in catalogue 7)
Marking tags
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
SDIS 0.4X2.5X75
DEK 5/5
Qty.
60
60
60
20
Order No.
1608860000
1608870000
1608880000
1608940000
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
20
1883210000
20
1
Qty.
60
60
60
20
Order No.
1608860000
1608870000
1608880000
1608940000
PAP PDL4
current
24 A
24 A
24 A
24 A
Width
1.5 mm
20
1883210000
8630740000
ZEW 35/2
8 mm
20
8630740000
9008370000
SDIS 0.4X2.5X75
1
9008370000
DEK 5/5
Note
B.34
1282250000 – 2012/2013
Actuator and installation terminals
4 mm²
Terminals, P-Series
PDL 4 L/L
5.1 x 100 x 49.5
/4
0.08...4
IEC
400
32
4
L
L
B
UL
CSA
150 (C)
300 (B)
17 (C)
20 (B)
AWG 28...10
AWG 28...10
6 kV / 3
A3 / V-0
r{u#
Rated connection
0.5...4 / 1.5...4
0.5...4 / 0.5...4
0.5...1.5
12 / 3.0 x 0.5 mm
Type
PDL 4/L/L
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
Qty.
50
Order No.
1882590000
Qty.
60
60
60
20
Order No.
1608860000
1608870000
1608880000
1608940000
PAP PDL4
current
24 A
24 A
24 A
24 A
Width
1.5 mm
20
1883210000
ZEW 35/2
8 mm
20
8630740000
1
9008370000
SDIS 0.4X2.5X75
DEK 5/5
1282250000 – 2012/2013
B.35
Terminals, P-Series
Marshalling- and potential distribution terminal blocks – overview
The PRV and PPV marshalling- and
potential distribution terminal blocks
ä
The affordable and space-saving method for signal distribution
and routing
B
Today’s control systems are becoming increasingly more complex
with higher and higher demands for the monitoring and capturing of
operational data. These demands have resulted in a relentless growth
in the number of field measuring devices. These trends pose new
challenges to engineers.
On one hand, the additional signals for the automation need to be
connected and processed. On the other hand this means using up more
space and increased costs.
These challenges can be simply dealt with using Weidmuller‘s new
marshalling and distribution terminals. The PRV, with its PUSH IN wire
connection, is the most compact marshalling terminal worldwide.
Amazing space saving
In comparison to conventional multi-tier
terminals, the new marshalling- and potential
distribution terminal blocks have a higher
contact density.
Up to 50 % less space is used in the electrical
cabinet with the optimised PRV design.
16x
8x
4x
8x
Optimal orientation
Colour coding on the terminals provides for easy
assignment of signals and and clarity during
extension work or maintenance.
B.36
1282250000 – 2012/2013
Marshalling- and potential distribution terminal blocks – overview
Terminals, P-Series
Compact and redundant
The PUSH IN double connection offers
redundant connection, taking up minimal space.
B
PPV power distribution terminal
For simple and safe potential distribution,
the four-level and eight-level marshalling
terminals are also available as potential
distribution terminals.
ä
Low contact resistance
The busbar‘s unique V-shape allows for varying
expansion of materials and ensures low contact
resistances.
1282250000 – 2012/2013
Simple – The stripped wire is simply
inserted into the terminal point, and
a reliable, vibration proof, gas-tight
connection is guaranteed.
Safe – The best designed connection
method features high wire extraction
forces and vibration resistance.
B.37
Marshalling- and potential distribution terminal blocks
PRV 4 RT
Terminals, P-Series
PRV
1.5 mm²
PRV 4 WS
NEW
NEW
9.2 x 70 x
13 / 1.5
0.2...1.5
9.2 x 70 x
13 / 1.5
0.2...1.5
1.5 mm²
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
B
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
IEC 60947-7-1, DIN EN 60079
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Twin wire-end ferrule
Stripping length / Blade size
V
A
mm²
IEC
250
10
1.5
UL
CSA
300 (D)
300 (D)
10 (D)
10 (D)
AWG 26...16
AWG 26...16
4 kV / 3
/ V-0
IEC
250
10
1.5
r{ #
mm²
mm²
mm²
mm/-
UL
CSA
300 (D)
300 (D)
10 (D)
10 (D)
AWG 26...16
AWG 26...16
4 kV / 3
/ V-0
r{ #
Rated connection
0.2...1.5 / 0.2...1.5
0.2...1.5 / 0.2...1.5
Rated connection
0.2...1.5 / 0.2...1.5
0.2...1.5 / 0.2...1.5
10 / 0.6 x 3.5 mm
10 / 0.6 x 3.5 mm
Note
Ordering data
Version
Black for TS 35x15
Blue for TS 35x15
Black for TS 35x7.5
Blue for TS 35x7.5
Note
Type
PRV 4 SW 35X15 RT
PRV 4 BL 35X15 RT
PRV 4 SW 35X7.5 RT
PRV 4 BL 35X7.5 RT
Qty.
20
20
20
20
Order No.
1173810000
1267890000
1173830000
1267900000
RT = red actuators
Type
PRV 4 SW 35X15 WS
PRV 4 BL 35X15 WS
PRV 4 SW 35X7.5 WS
PRV 4 BL 35X7.5 WS
Qty.
20
20
20
20
Order No.
1173820000
1173920000
1173840000
1173930000
WS = white actuators
Accessories
End plate
Marker holder
Partition plate
End bracket
Screwdriver
Pluggable cross-connection
Identification systems
black
blue
grey
Black for TS 35x15
Blue for TS 35x15
Black for TS 35x7.5
Blue for TS 35x7.5
Unprinted
Printed 0...3 or 0...7 or 0...15
Printed 1...4 or 1...8 or 1...16
Printed A...D or A...H or A...P
black
Standard
2-pole
(see assortment in catalogue 7)
Marking tags
Type
PAP PRV/PPV4 SW
PAP PRV/PPV4 BL
PAP PRV/PPV4 GR
Width
3 mm
3 mm
3 mm
Qty.
10
10
10
Order No.
1173750000
1268010000
1211450000
Type
PAP PRV/PPV4 SW
PAP PRV/PPV4 BL
PAP PRV/PPV4 GR
10.2 mm
10.2 mm
10.2 mm
10.2 mm
20
20
20
20
1173590000
1267980000
1173600000
1267990000
BZT PRV4 SW 35X15
BZT PRV4 BL 35X15
BZT PRV4 SW 35X7.5
BZT PRV4 BL 35X7.5
TW PRV4
TW PRV4 0-3
TW PRV4 1-4
TW PRV4 A-D
2 mm
2 mm
2 mm
2 mm
10
10
10
10
1173700000
1230060000
1230050000
1230070000
ZEW 35/2 SW
8 mm
20
BZT PRV4 SW 35X15
BZT PRV4 BL 35X15
BZT PRV4 SW 35X7.5
BZT PRV4 BL 35X7.5
SDIS SL 0.6X3.5X100
SRC-I QV P
WS 7.8/9.2
current
Width
3 mm
3 mm
3 mm
Qty.
10
10
10
Order No.
1173750000
1268010000
1211450000
10.2 mm
10.2 mm
10.2 mm
10.2 mm
20
20
20
20
1173590000
1267980000
1173600000
1267990000
TW PRV4
TW PRV4 0-3
TW PRV4 1-4
TW PRV4 A-D
2 mm
2 mm
2 mm
2 mm
10
10
10
10
1173700000
1230060000
1230050000
1230070000
1162610000
ZEW 35/2 SW
8 mm
20
1162610000
1
1274660000
SDIS SL 0.6X3.5X100
1
1274660000
10
8870840000
SRC-I QV P
10
8870840000
current
WS 7.8/9.2
Note
B.38
1282250000 – 2012/2013
Marshalling- and potential distribution terminal blocks
1.5 mm²
PRV 8 WS/RT
NEW
NEW
9.2 x 120 x
10 / 1.5
0.2...1.5
9.2 x 120 x
10 / 1.5
0.2...1.5
1.5 mm²
Terminals, P-Series
PRV 8 RT/WS
PRV
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
B
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Twin wire-end ferrule
Stripping length / Blade size
V
A
mm²
IEC
250
8
1.5
UL
CSA
300 (D)
300 (D)
10 (D)
10 (D)
AWG 26...16
AWG 26...16
4 kV / 3
/ V-0
IEC
250
8
1.5
r{ #
mm²
mm²
mm²
mm/-
UL
CSA
300 (D)
300 (D)
10 (D)
10 (D)
AWG 26...16
AWG 26...16
4 kV / 3
/ V-0
r{ #
Rated connection
0.2...1.5 / 0.2...1.5
0.2...1.5 / 0.2...1.5
Rated connection
0.2...1.5 / 0.2...1.5
0.2...1.5 / 0.2...1.5
10 / 0.6 x 3.5 mm
10 / 0.6 x 3.5 mm
Note
Ordering data
Version
Black for TS 35x15
Blue for TS 35x15
Black for TS 35x7.5
Blue for TS 35x7.5
Note
Type
PRV 8 SW 35X15 RT/WS
PRV 8 BL 35X15 RT/WS
PRV 8 SW 35X7.5 RT/WS
PRV 8 BL 35X7.5 RT/WS
Qty.
20
20
20
20
Order No.
1173740000
1267830000
1173790000
1267840000
RT = red actuators
WS = white actuators
Type
PRV 8 SW 35X15 WS/RT
PRV 8 BL 35X15 WS/RT
PRV 8 SW 35X7.5 WS/RT
PRV 8 BL 35X7.5 WS/RT
Qty.
20
20
20
20
Order No.
1173780000
1173900000
1173800000
1173910000
RT = red actuators
WS = white actuators
Accessories
End plate
Marker holder
Partition plate
End bracket
Screwdriver
Pluggable cross-connection
Identification systems
black
blue
grey
Black for TS 35x15
Blue for TS 35x15
Black for TS 35x7.5
Blue for TS 35x7.5
Unprinted
Printed 0...3 or 0...7 or 0...15
Printed 1...4 or 1...8 or 1...16
Printed A...D or A...H or A...P
black
Standard
2-pole
(see assortment in catalogue 7)
Marking tags
Type
PAP PRV/PPV8 SW
PAP PRV/PPV8 BL
PAP PRV/PPV8 GR
Width
3 mm
3 mm
3 mm
Qty.
10
10
10
Order No.
1173720000
1268000000
1211460000
Type
PAP PRV/PPV8 SW
PAP PRV/PPV8 BL
PAP PRV/PPV8 GR
10.2 mm
10.2 mm
10.2 mm
10.2 mm
20
20
20
20
1173570000
1267950000
1173580000
1267970000
BZT PRV8 SW 35X15
BZT PRV8 BL 35X15
BZT PRV8 SW 35X7.5
BZT PRV8 BL 35X7.5
TW PRV8
TW PRV8 0-7
TW PRV8 1-8
TW PRV8 A-H
2 mm
2 mm
2 mm
2 mm
10
10
10
10
1173670000
1230090000
1230080000
1230110000
ZEW 35/2 SW
8 mm
20
BZT PRV8 SW 35X15
BZT PRV8 BL 35X15
BZT PRV8 SW 35X7.5
BZT PRV8 BL 35X7.5
SDIS SL 0.6X3.5X100
SRC-I QV P
WS 7.8/9.2
current
Width
3 mm
3 mm
3 mm
Qty.
10
10
10
Order No.
1173720000
1268000000
1211460000
10.2 mm
10.2 mm
10.2 mm
10.2 mm
20
20
20
20
1173570000
1267950000
1173580000
1267970000
TW PRV8
TW PRV8 0-7
TW PRV8 1-8
TW PRV8 A-H
2 mm
2 mm
2 mm
2 mm
10
10
10
10
1173670000
1230090000
1230080000
1230110000
1162610000
ZEW 35/2 SW
8 mm
20
1162610000
1
1274660000
SDIS SL 0.6X3.5X100
1
1274660000
10
8870840000
SRC-I QV P
10
8870840000
current
WS 7.8/9.2
Note
1282250000 – 2012/2013
B.39
Marshalling- and potential distribution terminal blocks
PRV 16 RT/WS
Terminals, P-Series
PRV
1.5 mm²
PRV 16 WS/RT
NEW
NEW
9.2 x 225 x
11 / 1.5
0.2...1.5
9.2 x 225 x
11 / 1.5
0.2...1.5
1.5 mm²
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
B
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
IEC 60947-7-1, DIN EN 60079
IEC 60947-7-1, DIN EN 60079
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Twin wire-end ferrule
Stripping length / Blade size
IEC
250
6
1.5
V
A
mm²
UL
CSA
300 (D)
300 (D)
1 (D)
1 (D)
AWG 26...16
AWG 26...16
4 kV / 3
/ V-0
IEC
250
6
1.5
r{ #
mm²
mm²
mm²
mm/-
UL
CSA
300 (D)
300 (D)
1 (D)
1 (D)
AWG 26...16
AWG 26...16
4 kV / 3
/ V-0
r{ #
Rated connection
0.2...1.5 / 0.2...1.5
0.2...1.5 / 0.2...1.5
Rated connection
0.2...1.5 / 0.2...1.5
0.2...1.5 / 0.2...1.5
10 / 0.6 x 3.5 mm
10 / 0.6 x 3.5 mm
Note
Ordering data
Version
Black for TS 35x15
Blue for TS 35x15
Black for TS 35x7.5
Blue for TS 35x7.5
Note
Type
PRV 16 SW 35X15 RT/WS
PRV 16 BL 35X15 RT/WS
PRV 16 SW 35X7.5 RT/WS
PRV 16 BL 35X7.5 RT/WS
Qty.
20
20
20
20
Order No.
1173620000
1267790000
1173680000
1267810000
RT = red actuators
WS = white actuators
Type
PRV 16 SW 35X15 WS/RT
PRV 16 BL 35X15 WS/RT
PRV 16 SW 35X7.5 WS/RT
PRV 16 BL 35X7.5 WS/RT
Qty.
20
20
20
20
Order No.
1173650000
1267800000
1173710000
1267820000
RT = red actuators
WS = white actuators
Accessories
End plate
Marker holder
Partition plate
End bracket
Screwdriver
Pluggable cross-connection
Identification systems
black
blue
grey
Black for TS 35x15
Blue for TS 35x15
Black for TS 35x7.5
Blue for TS 35x7.5
Type
BZT PRV16 SW 35X15
BZT PRV16 BL 35X15
BZT PRV16 SW 35X7.5
BZT PRV16 BL 35X7.5
Width
Qty.
Order No.
Type
10.2 mm
10.2 mm
10.2 mm
10.2 mm
20
20
20
20
1173540000
1267930000
1173550000
1267940000
BZT PRV16 SW 35X15
BZT PRV16 BL 35X15
BZT PRV16 SW 35X7.5
BZT PRV16 BL 35X7.5
Width
Qty.
Order No.
10.2 mm
10.2 mm
10.2 mm
10.2 mm
20
20
20
20
1173540000
1267930000
1173550000
1267940000
Unprinted
Printed 0...3 or 0...7 or 0...15
Printed 1...4 or 1...8 or 1...16
Printed A...D or A...H or A...P
TW PRV16
TW PRV16 0-15
TW PRV16 1-16
TW PRV16 A-P
2 mm
2 mm
2 mm
2 mm
10
10
10
10
1173630000
1230130000
1230120000
1230140000
TW PRV16
TW PRV16 0-15
TW PRV16 1-16
TW PRV16 A-P
2 mm
2 mm
2 mm
2 mm
10
10
10
10
1173630000
1230130000
1230120000
1230140000
black
WEW 35/1 SW
12 mm
50
1162600000
WEW 35/1 SW
12 mm
50
1162600000
1
1274660000
SDIS SL 0.6X3.5X100
1
1274660000
10
8870840000
SRC-I QV P
10
8870840000
Standard
2-pole
(see assortment in catalogue 7)
Marking tags
SDIS SL 0.6X3.5X100
SRC-I QV P
WS 7.8/9.2
current
current
WS 7.8/9.2
Note
B.40
1282250000 – 2012/2013
Marshalling- and potential distribution terminal blocks
1.5 mm²
PPV 8
NEW
NEW
9.2 x 70 x
/ 1.5
0.2...1.5
9.2 x 120 x
/ 1.5
0.2...1.5
1.5 mm²
Terminals, P-Series
PPV 4
PPV
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
B
IEC 60947-7-1, DIN EN 60079
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Twin wire-end ferrule
Stripping length / Blade size
V
A
mm²
IEC
250
17.5
1.5
UL
CSA
300 (D)
300 (D)
10 (D)
10 (D)
AWG 26...16
AWG 26...16
4 kV / 3
/ V-0
IEC
250
17.5
1.5
r{ #
mm²
mm²
mm²
mm/-
UL
CSA
300 (D)
300 (D)
10 (D)
10 (D)
AWG 26...16
AWG 26...16
4 kV / 3
/ V-0
r{ #
Rated connection
0.2...1.5 / 0.2...1.5
0.2...1.5 / 0.2...1.5
Rated connection
0.2...1.5 / 0.2...1.5
0.2...1.5 / 0.2...1.5
10 / 0.6 x 3.5 mm
10 / 0.6 x 3.5 mm
Note
Ordering data
Version
Blue for TS 35x15
Grey for TS 35x15
Blue for TS 35x7.5
Grey for TS 35x7.5
Note
Type
PPV 4 BL 35X15 DGR
PPV 4 GR 35X15 DGR
PPV 4 BL 35X7.5 DGR
PPV 4 GR 35X7.5 DGR
Qty.
20
20
20
20
Order No.
1267910000
1173880000
1267920000
1173890000
DRG = dark grey actuators
Type
PPV 8 BL 35X15 DGR
PPV 8 GR 35X15 DGR
PPV 8 BL 35X7.5 DGR
PPV 8 GR 35X7.5 DGR
Qty.
20
20
20
20
Order No.
1267870000
1173850000
1267880000
1173870000
DRG = dark grey actuators
Accessories
End plate
Marker holder
Partition plate
End bracket
Screwdriver
Pluggable cross-connection
Identification systems
black
blue
grey
Black for TS 35x15
Blue for TS 35x15
Black for TS 35x7.5
Blue for TS 35x7.5
Unprinted
Printed 0...3 or 0...7 or 0...15
Printed 1...4 or 1...8 or 1...16
Printed A...D or A...H or A...P
black
Standard
2-pole
(see assortment in catalogue 7)
Marking tags
Type
PAP PRV/PPV4 SW
PAP PRV/PPV4 BL
PAP PRV/PPV4 GR
Width
3 mm
3 mm
3 mm
Qty.
10
10
10
Order No.
1173750000
1268010000
1211450000
Type
PAP PRV/PPV8 SW
PAP PRV/PPV8 BL
PAP PRV/PPV8 GR
10.2 mm
10.2 mm
10.2 mm
10.2 mm
20
20
20
20
1173590000
1267980000
1173600000
1267990000
BZT PRV8 SW 35X15
BZT PRV8 BL 35X15
BZT PRV8 SW 35X7.5
BZT PRV8 BL 35X7.5
TW PRV4
TW PRV4 0-3
TW PRV4 1-4
TW PRV4 A-D
2 mm
2 mm
2 mm
2 mm
10
10
10
10
1173700000
1230060000
1230050000
1230070000
ZEW 35/2 SW
8 mm
20
BZT PRV4 SW 35X15
BZT PRV4 BL 35X15
BZT PRV4 SW 35X7.5
BZT PRV4 BL 35X7.5
SDIS SL 0.6X3.5X100
SRC-I QV P
WS 7.8/9.2
current
Width
3 mm
3 mm
3 mm
Qty.
10
10
10
Order No.
1173720000
1268000000
1211460000
10.2 mm
10.2 mm
10.2 mm
10.2 mm
20
20
20
20
1173570000
1267950000
1173580000
1267970000
TW PRV8
TW PRV8 0-7
TW PRV8 1-8
TW PRV8 A-H
2 mm
2 mm
2 mm
2 mm
10
10
10
10
1173670000
1230090000
1230080000
1230110000
1162610000
ZEW 35/2 SW
8 mm
20
1162610000
1
1274660000
SDIS SL 0.6X3.5X100
1
1274660000
10
8870840000
SRC-I QV P
10
8870840000
current
WS 7.8/9.2
Note
1282250000 – 2012/2013
B.41
Terminals, P-Series
Marshalling- and potential distribution terminal blocks
16 level terminals with
Pushers in white and red
PRV 16 SW 35X7.5 WS/RT
Marker
WS7.8/9.2 PLUS MC GR
B
16 level terminals with
Pushers in red and white
PRV 16 SW 35X7.5 RT/WS
End bracket in black
WEW 35/1 SW
Mounting rail
Type TS35, 7.5 mm high
Printed partition plate
TW PRV 1-16
Technical data
Marker carrier BZT PRV 16 SW 35X7.5
Marker WS7.8/9.2 PLUS MC GR
B.42
Partition plate
unprinted
unprinted
unprinted
printed 0...3
printed 0...7
printed 0...15
printed 1...4
printed 1...8
printed 1...16
printed A...D
printed A...H
printed A...P
Type
TW PRV4
TW PRV8
TW PRV16
TW PRV4 0-3
TW PRV8 0-7
TW PRV16 0-15
TW PRV4 1-4
TW PRV8 1-8
TW PRV16 1-16
TW PRV4 A-D
TW PRV8 A-H
TW PRV16 A-P
Order No.
1173700000
1173670000
1173630000
1230060000
1230090000
1230130000
1230050000
1230080000
1230120000
1230070000
1230110000
1230140000
1282250000 – 2012/2013
Terminals, P-Series
B
1282250000 – 2012/2013
B.43
Terminals, P-Series
Accessories P-Series
Extra functions
Introduction
B
The accessories for our other ranges
of modular terminals can also be used
with the P-Series in order to reduce
the number of variations. The use of
accessories enables users to adapt and
mould the terminals, to perfectly match
the needs of their application.
All Weidmüller accessories are built to
the same high-quality standards as the
terminals themselves.
Retaining and end plates
Page B.46
End plates cover the open side of
the terminals. This ensures touch
protection for fingers and hands.
Retaining plates, which for the P-Series
also function as end plates, must be
positioned every 200 mm when using
the 10 x 3 busbar.
B.44
1282250000 – 2012/2013
Terminals, P-Series
Accessories P-Series
Fastening
Chapter F
Electrical supply
Page B.47
Electrical distribution
Page B.48
B
An end bracket is fitted on the
mounting rail to the right and left of the
terminals to ensure that they sit firmly
in position. The marking surface of the
end bracket can also be used for group
marking. Details of the wide range of
Weidmüller end brackets and mounting
rails are given in chapter F.
There are three options for supplying
power to the Weidmüller PUSH IN
modular terminals: the PEI 16 supply
terminals, the PDU 6/10 or the
PDU 2.5/4 feed-through terminal.
The input current is split into several
output currents by means of crossconnections.
A 16 mm2 conductor carries the
incoming supply, which is distributed to
the neighbouring terminals with
cross-sections from 0.5 to 10 mm2.
A pluggable cross-connection
system (ZQV) is available for all
P-Series terminals.
The current is distributed across any
number of terminals by simply plugging
the cross-connection into the middle of
the terminals. As a rule, 400 V can be
transmitted across the cross-section,
depending on the rated voltage of the
terminal.
Testing / checking
Marking
Connecting
Page B.50
The plug-in test adapter (PTA) is
used as a single unit and as a test
adapter strip for voltage measurement
in control cabinets. The test adapter is
ideal for convenient testing of
assembled terminals.
It is simply clipped into the crossconnection channel of the terminal.
This ensures that it makes contact with
the busbar carrying the current.
1282250000 – 2012/2013
Page B.50
Weidmüller‘s identification systems in
chapter F are used to mark PUSH IN
technology terminals. Individual
terminals, groups of terminals and
cables or conductors can be marked.
Marker strips are available for every size
of terminal, which means that several
terminals can be marked together.
Page B.53
The PUSH IN connection saves time
and requires solid single-core wires or
wire-end ferrules. Ferrules have wellestablished installation advantages.
In addition, they guarantee an
electrical connection of permanent
and consistent quality. By using twin
ferrules, it is possible to connect two
wires in one terminal point.
B.45
Accessories – Support plates and end plates
Terminals, P-Series
Support plates and end plates
B
Ordering data
Type
Width
3 mm
PAP PRV/PPV8 SW
PAP PRV/PPV8 GR
Width
3 mm
PAP PRV/PPV4 SW
PAP PRV/PPV4 GR
PAP PRV/PPV4 BL
Width
3 mm
PAP 2.5/4
PAP 2.5/4 BL
Colour
Qty.
black
grey
10
10
1173720000 PRV 8
1211460000 PPV 8
black
grey
blue
10
10
10
1173750000 PRV 4
1211450000 PPV 4
1268010000
dark beige
blue
50
50
Width
3 mm
PAP 2.5/4/3AN
PAP 2.5/4/3AN BL
1896300000 PDU 2.5/4
1049210000 PDU 2.5/4 BL
PNT 2.5/4
PPE 2.5/4
dark beige
blue
50
50
Width
3 mm
PAP 2.5/4/4AN
PAP 2.5/4/4AN BL
1896480000 PDU 2.5/4 3AN
1052300000 PDU 2.5/4 3AN BL
PPE 2.5/4 3AN
dark beige
blue
50
50
Width
2.7 mm
PAP PDU16S
1896320000 PDU 2.5/4 2x2
1052290000 PDU 2.5/4 4AN
PDU 2.5/4 4AN BL
PPE 2.5/4 4AN
dark beige
10
1139910000 PDU 16S
PPE 16S
dark beige
20
1221360000 PMAK 4
dark beige
10
Width
3 mm
PAP PDU6/10
PAP PDU6/10 BL
1896290000 PDU 16
PDU 16 BL
PPE 16
dark beige
blue
20
50
Width
3 mm
PAP PDU6/10/3AN
1896330000 PDU 6/10
1049200000 PDU 6/10 BL
PPE 6/10
PPE 6/10 3AN
dark beige
20
Width
3 mm
PAP PTR2.5/4
1896340000 PDU 6/10 3AN
PDU 6/10 3AN BL
dark beige
20
Width
3 mm
PAP PTR2.5/4/3AN
1934680000 PTR2.5/4
PTR 2.5/4 O TNHE
dark beige
20
Width
3 mm
PAP PTR2.5/4/4AN
1934690000 PTR 2.5/4 3AN
PTR 2.5/4 3AN O TNHE
dark beige
20
Width
3 mm
PAP PDK 2.5/4
1934700000 PTR 2.5/4 4AN
PTR 2.5/4 4AN O TNHE
dark beige
20
Width
PAP PDL4
3 mm
1919720000 PDK 2.5/4
PDK 2.5/4 BL
PDK 2.5/4 PE
PDK 2.5/4L-PE
PDK 2.5/4N-L
PDK 2.5/4V
PDK 2.5/4V BL
dark beige
20
Width
PAP PDL4S
3 mm
1883210000 PDL 4 L/L
PDL 4 L/L/PE
PDL 4 N/L/PE
PDL 4 NT/L
PDL 4 NT/L/PE
PDL 4/TR/DU/PE
PDL 4/TR/DU
PDL 4/TR/DU O TNHE
PDL 4/TR/DU/PE O TNHE
dark beige
20
1837070000 PDL4 S/NT/L/PE
PDL4 S/L/L
PDL 4 S/L
PDL4 S/N/L/PE
PDL 4 S/N/L
PDL 4 S/N
PDL4 S/L/L/PE
blue
blue
20
20
1896390000 PNT 2.5/4
1916790000
blue
blue
10
10
1896100000 PNT 6/10
1919710000
blue
blue
10
10
1896380000 PNT 16
1919690000
dark beige
black
20
20
1165320000 PSI 6/10
1165330000 PTL 6/10
PTD 6/10
Width
1 mm
PAP PMAK 4
Width
3 mm
PAP 16
Touch-safe protection
With only a few exceptions, the last terminal in a terminal strip must be closed
off with a PAP-type end plate. End plates must also be used within a terminal
strip when it makes use of terminals of different sizes. This ensures the touchsafe requirement is met for live voltage components. The terminals have touch
protection.
Ensuring the operating voltage
End plates can also be used to maintain the required clearance and creepage
distances, in order to guarantee the rated voltage for the application. They can be
used, for example, when cross-connections are used side-by-side.
Contour matching
The outer dimensions of the end plates match the external dimensions of the
associated terminal.
Mounting
The end plate‘s snap-in pegs allow it to be simply fitted on to the corresponding
terminal. The corresponding indentations in the terminal are used to ensure that
position follows the identical contours.
Width
3 mm
PHP PNT 2.5/4
PHP PNT 2.5/4 SO*
Width
3 mm
PHP PNT 6/10
PHP PNT 6/10 SO*
Width
3 mm
PHP PNT16
PHP PNT16 SO*
Width
3 mm
PAP PTL/PSI 6/10
PAP PTL/PSI 6/10 SW
*) For a vertical installation position
B.46
Order No.
For terminal:
1282250000 – 2012/2013
Feeding with standard terminals
Using standard terminals for the supply is ideal
because the feed-through terminals of the P-Series
exhibit a very wide clamping range.
Left-hand feed
Right-hand feed
Feed options and cross-connections to be used
Feed terminal
Output terminal
Cross-connection
PDU 2.5/4
PDU 2.5/4
PDU 2.5/4/3AN
PDU 2.5/4/4AN
PTR 2.5/4
ZQV 2.5/…
ZQV 2.5/…
ZQV 2.5/…
ZQV 2.5/…
Left-hand
feed
•
•
•
•
PDU 2.5/4/3AN
PDU 2.5/4
PDU 2.5/4/3AN
PDU 2.5/4/4AN
ZQV 2.5/…
ZQV 2.5/…
ZQV 2.5/…
•
•
PDU 2.5/4/4AN
PDU 2.5/4
PDU 2.5/4/3AN
PDU 2.5/4/4AN
ZQV 2.5/…
ZQV 2.5/…
ZQV 2.5/…
•
PTR 2.5/4
PDK 2.5/4
ZQV 2.5/...
•
PDU 6/10
PDU 2.5/4
PDU 2.5/4/4AN
PDU 6/10
PDU 6/10/3AN
PTR 2.5/4
ZQV 2.5/…
ZQV 2.5/…
ZQV 6N/…
ZQV 6N/…
ZQV 2.5/…
•
•
•
PDU 2.5/4
PDU 2.5/4/3AN
PDU 6/10
PDU 6/10/3AN
PTR 2.5/4
ZQV 2.5/…
ZQV 2.5/…
ZQV 6N/…
ZQV 6N/…
ZQV 2.5/…
PDU 6/10/3AN
Feed terminal PEI 16
Output possible on left and right
A supply cable with a cross-section of up to 25 mm2
is possible with the PEI 16 feed terminal. Standard
cross-connections are used to distribute the current
to any number of terminals with a smaller crosssection.
Output options and cross-connections to be used
The table on the right shows a number of variations
for distributing the current with the cross-connection
specified.
1282250000 – 2012/2013
Feed terminal
Output terminal
Cross-connection
PEI 16
PDU 2.5/4
PDU 2.5/4/3AN
PDU 2.5/4/4AN
PTR 2.5/4
PDU 6/10
PDU 6/10 3AN
ZQV 2.5/...
ZQV 2.5/...
ZQV 2.5/...
ZQV 2.5/...
ZQV 6N...
ZQV 6N...
•
•
Left-hand
feed
•
•
•
•
•
Right-hand
feed
•
Terminals, P-Series
Accessories – Electrical supply
•
•
•
•
•
B
•
•
•
•
•
•
•
Right-hand
feed
•
•
•
•
•
•
B.47
Accessories – Electrical distribution
Terminals, P-Series
Plug-in cross-connection ZQV
Breaking out contact elements
If one or more (max. 60 % for reasons of stability
and temperature rise) of the contact elements are
broken out of the cross-connections, terminals may
be bypassed to suit the application.
Fitting and changing cross-connections
B
The time-saving, easy-to-use cross-connection combs
for terminals, featuring PUSH IN technology.
The fitting and changing of cross-connections
is a trouble-free and fast operation:
– Insert the cross-connection into the crossconnection channel in the terminal...
•ZQV 2.5 as 2- to 10-pole combs and
• ZQV 6/N as 2- to 4-pole combs and
• ZQV 16/2 as 2-pole comb (link)
… and press it fully home. (The cross-connection
may not project from the channel.)
These versions come with complete
shock protection.
However, please note that the rated voltage is
reduced to 400 V when using cross-connections.
This does not apply to terminals with a
rated voltage below 400 V. Here the rated
voltage of the used terminal is mandatory.
– R emove a cross-connection by simply prising it out
with a screwdriver.
Shortening cross-connections
Cross-connections can be shortened in length
using a suitable cutting tool, e.g. KT ZQV (order no.
9002170000). However, three contact elements
must always be retained.
Caution:
Contact elements must not
be deformed!
If the user shortens the cross-connections it is
necessary to use end plates with the terminals in
order to maintain the rated voltage of 250 V (at the
bare, cut edges of the cross-connection).
B.48
1282250000 – 2012/2013
Accessories - Electrical distribution
Possible combinations
single
adjacent
Terminals, P-Series
In one cross-connection channel
bridging
B
In two cross-connection channels
parallel/bridging
parallel lengthening / chain bridge
Possible cross-connections of terminals of the same type with corresponding cross-connectors
Terminal type
Standard terminals
PDU 2.5/4
PDU 2.5/4/3AN
PDU 2.5/4/4AN
PDU 6/10
PDU 6/10/3AN
PDU 16
Cross-connection
single
adjacent
bridging
ZQV 2.5/…
ZQV 2.5/…
ZQV 2.5/…
ZQV 6N/…
ZQV 6N/…
ZQV 16/2
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
The ZQV 2.5/20 cross-connector allows
you to easily and separately connect up to
20 terminals with each other.
The electrician can cut off the required
amount of contact elements from the
continuous 20-pole cross-connection comb.
Caution: ZQV with more than 10 poles
are not fingersafe and not approved for
ATEX use.
Technical data
Rated current
Ordering data
1282250000 – 2012/2013
A
2-pole
3-pole
4-pole
5-pole
6-pole
7-pole
8-pole
9-pole
10-pole
20-pole
ZQV 2.5
24 / 24
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/5
ZQV 2.5/6
ZQV 2.5/7
ZQV 2.5/8
ZQV 2.5/9
ZQV 2.5/10
ZQV 2.5/20
For terminal:
PDL 4 ...
PDL 4S ...
PDU 2.5/4 ...
PDIC 2.5/4
parallel
bridging
•
•
•
•
•
ZQV 6 N
Qty.
60
60
60
20
20
20
20
20
20
20
Order No.
1608860000
1608870000
1608880000
1608890000
1608900000
1608910000
1608920000
1608930000
1608940000
1908960000
57
Type
ZQV 6N/2
ZQV 6N/3
ZQV 6N/4
ZQV 6N/20
For terminal:
PDU 6/10
PDU 6/10 3AN
PNT 6/10
chain bridge
parallel/lengthening
•
•
•
•
•
•
ZQV 16/2
Qty.
60
60
60
Order No.
1906210000
1906220000
1906230000
20
1906240000
76 / 76
Type
ZQV 16/2
Qty.
25
Order No.
1739690000
For terminal:
PDU 16
B.49
Terminals, P-Series
Accessories - Testing / checking
B
Test adapter
PTA
Reducing sleeves
PRH 2.5/4
The clip-on test adapter PTA is used
as a single thin element and as a test
adapter strip for voltage measurements
in electrical cabinets. Conductors with
cross-sections from 0.5 mm² to 1.5 mm²
can be connected. The test adapter simply
clips onto the terminal and thus guarantees
reliable contact with the live busbar.
With assembly peg
The use of reducing sleeves simplifies the
connection of conductors with smaller
cross-sections. Conductors can be reliably
inserted into the clamping point without
the strands fraying. The use of a reducing
sleeve centres the conductor in the entry
point.
Packaged in sets of 100 x 10-pole strips
Reducing sleeves
Dimensions
Width / Length / Height
Stripping length
Rated data
Rated voltage
Rated current
Rated cross-section
Clamped conductors (H05V/H07V)
solid / stranded
flexible / flexible with ferrule
Ordering data
mm
mm
V
A
mm²
250
17.5
1.5
mm²
mm²
0.5...1.5
0.5...1.5 / 0.5...1.5
Type
PTA PDU2.5/4
PTA ZA PDU2.5/4
For terminal:
PDU 2.5/4
1-pole
With snap-in pegs
Technical data
Product type
Ordering data
5.1 / 20 / 59
6
For conductor 0.5 mm², grey
For conductor 1 mm², dark grey
Qty.
25
25
Terminal width, 5.1 mm
Terminal width, 8 mm
Terminal width, 12 mm
B.50
Order No.
1916410000
1916400000
Qty.
100
100
100
100
Order No.
1805490000
1805520000
1805480000
1805530000
BZT 1/BZT 2
Label
The BZT marking tags enable you to label
the middle of the marking channel with the
WS 10/5 tags. The marking tags can be
put together with pins in order to achieve
the greatest degree of stability.
The VDE standards call for power
connection terminals to be covered.
For this purpose, Weidmüller can supply
yellow warning PAD covers with the
“lightning flash“ symbol.
The cover is clipped into the screwdriver
slit in the terminal and each one covers a
group of four terminals.
Technical data
Product type
Ordering data
Qty.
100
100
Order No.
1916180000
1916190000
PAD
Cover
Reducing sleeve
Type
PRH 2.5/4/1
PRH 2.5/4/2
For terminal:
PDU 2.5/4
PDK 2.5/4
end plate and intermediate plate
Type
Qty.
PAD 2.5/4/4
80
PAD 6/10/4
80
PAD 16/4
80
For terminal:
PDU 2.5/4 ...
PTR 2.5/4 ...
PDK 2.5/4 ...
PDU 6/10 ...
PDU 16 ...
Order No.
1916150000
1916160000
1916170000
Technical data
Product type
Ordering data
One-sided, without peg
One-sided, with peg
Two-sided without pin
Two-sided, with pin
Marker holder
Type
BZT 1 WS 10/5
BZT 1 ZA WS 10/5
BZT 2 WS 10/5
BZT 2 ZA WS 10/5
For terminal:
PDK 2.5/4 ...
PDL 4 ...
1282250000 – 2012/2013
Accessories – Other functions
▲
Terminals, P-Series
SIHA fuse holder
▲
For 5 x 20 G-fuse cartridges
The SIHA fuse holder converts a simple terminal into a fuse
terminal in next to no time.
B
2.Press out old fuse.
▲
1.Open fuse holder with fingers or screwdriver.
Simply remove the disconnect lever and insert
the fuse plug.
Better: order the PDL 4... OTNHE and insert the
SIHA immediately.
▲
•Simple handling without tools
•Housing made of Wemid (V0)
•Rated current 6.3 A
•Even fits on 5 mm wide terminals when fitted in offset
arrangement
3.Position new fuse.
4.Press fuse holder together again with fingers or
screwdriver.
SIHA 3
SIHA STRAP
Qty.
without LED
SIHA3/G20
•Identification position for Dekafix 5 and space for
the E-Fix self-adhesive label, size 8/20
400 V
with LED (red)
SIHA3/G20
10 - 36 V
35 - 70 V
60 - 150 V
140 - 250 V
For test-disconnect terminals versions
PTR 2.5/4…
PDL 4 TR/…
Order No.
1
7921560000
1
1
1
1
7921570000
7921580000
7921590000
7921600000
Applications with PTR 2.5/4..., PDL 4 TR/… and SIHA 3
PTR 2.5/4...
PDL 4 TR/...
und SIHA 3
1282250000 – 2012/2013
Single
Group
Single
Group
Qty.
with strap
SIHA STRAP
20
Order No.
9537680000
Connector for retro-fit assembly
• Receptacle in the terminal is the identification position
• Integrated identification position on the strap
• Slots into fuse holder either on the left or on the right
Short-circuit protection
Nom. value
Power loss
Rated current
4.0 W
6.3 A
1.6 W
6.3 A
1.6 W
6.3 A
1.6 W
6.3 A
Overload and short-circuit protection
Nom. value
Power loss
Rated current
1.6 W
6.3 A
1.6 W
6.3 A
B.51
Accessories – Other functions
ZST 1
Terminals, P-Series
Fuse carrier ZST 1
B
Dimensions
Width / Length / Height
Ordering data
Type
ZST 1
mm
8 / 62 / 40
Qty.
25
Order No.
1269070000
The ZST 1 fuse-carrier can hold 6 device fuses (5 x 20 or
5 x 25 mm) which are available for use during servicing
work.
Component isolating plugs
The Weidmüller philosophy is to realise a multitude of
applications with just a few parts. The component and
isolating plugs (BEST and TNST) represent a logical
extension of this cost-effective and efficient approach. The
component plug can accommodate electronic components
and connect them to the terminal. And once an isolating
plug is removed, the clamping point is obviously disconnected. The opening is easy to recognise.
Component plug (up to 250 V)
Ordering data
Type
BEST
BEST/DRBR
BEST/D
For terminal type
PTR 2.5/4...
PDL 4 TR/...
can be reversed
An unintentional reconnection of the circuit is prevented
by simply removing the isolating plug. The BEST and the
TNST have the same pin arrangement. Both plugs are also
identical with the SIHA 3 fuse holder, meaning that they
can be used in all the “disconnecting products” of the
W-, Z-, I- and P-Series.
Fitted with…
–
wire jumper
diode 1N4007
Qty.
25
25
25
Order No.
1833100000
1878570000
1878560000
Colour
yellow Wemid
Qty.
25
Order No.
1833090000
BEST
Isolating plug
Isolating plug
B.52
Ordering data
Type
TNST
For terminal type
PTR 2.5/4...
PDL 4 TR/...
1282250000 – 2012/2013
Accessories – Crimp Set
Crimp-Set PZ 16 PUSH IN
Terminals, P-Series
Crimp-Set PZ 6 roto PUSH IN
B
Assembly
Article description
Crimping tools for wire end ferrules 0.14 to 6 mm2
Stripping tool for up to 6 mm2
Wire end ferrule with plastic collar, Colour grey
Wire end ferrule with plastic collar, Colour orange
Wire end ferrule with plastic collar, Colour white
Wire end ferrule with plastic collar, Colour yellow
Wire end ferrule with plastic collar, Colour black
Wire end ferrule with plastic collar, Colour blue
Wire end ferrule with plastic collar, Colour black
Type
PZ 6 Roto
STRIPAX
H 4.0/20 DS GR
H0.5/16 OR
H0.75/18 W
H1.0/18 GE
H1.5/18D SW
H2.5/18D BL
H6.0/20 SW
Qty.
1
1
500
500
500
500
500
500
100
Technical data
Type
CRIMP-SET PZ 6 ROTO
1282250000 – 2012/2013
Article description
Crimping tools for wire end ferrules 6 to 16 mm2
Stripping tool for up to 6 mm2
Wire end ferrule with plastic collar, Colour ivory
Wire end ferrule with plastic collar, Colour black
Wire end ferrule with plastic collar, Colour ivory
Wire end ferrule with plastic collar, Colour green
Type
PZ 16
STRIPAX
H 10.0/22 S EB
H6.0/20 SW
H10.0/22 EB
H16.0/24 GN
Qty.
1
1
100
100
100
100
Technical data
Length x Width x Height
Weight
Ordering data
Assembly
340/270/60 mm
1760 g
Colour code
PI Weidmüller
Order No.
9028680000
Length x Width x Height
Weight
Ordering data
Type
CRIMP-SET PZ 16
340/270/60 mm
1725 g
Colour code
Weidmüller
Order No.
9025850000
B.53
Accessories – Wire end ferrules with plastic collar
¡'
/
Weidmüller colour code
packed loose
B
Weidmüller colour code
in multi-pack bag
B.54
6
6
Terminals, P-Series
¡'
/
• Polypropylene conical cable entry
• Heat-resistant up to 105 °C
• Cable entry made from non-flammable material on request
For conductors of size 0.14-150 mm2 (AWG 26-300MCM)
Material: E-Cu, tin galvanised
Dimensional tolerance acc. to DIN 46228 sect. 4
Ordering data
Type
H0.25/12
H0.34/12
H0.5/14
H0.5/16
H0.75/14
H0.75/16
H0.75/18
H1.0/14
H1.0/16
H1.0/18
H1.5/14
H1.5/16
H2.5/14D
H2.5/18D
H4.0/20 DS
H6.0/20
H 10.0/22 S
H16.0/24
ø mm2
0.25
0.34
0.50
0.50
0.75
0.75
0.75
1.00
1.00
1.00
1.50
1.50
2.50
2.50
4.00
6.00
10.00
16.00
Ordering data
Type
H0.14/12
H0.25/12
H0.34/12
H0.5/14
H0.5/16
H0.75/14
H0.75/16
H0.75/18
H1.0/16
H1.0/18
H1.5/16
ø mm2
0.14
0.25
0.34
0.50
0.50
0.75
0.75
0.75
1.00
1.00
1.50
AWG
24
22
20
20
18
18
18
17
17
17
16
16
14
14
12
10
7
6
L1
12.0
12.0
14.0
16.0
14.0
16.0
18.0
14.0
16.0
18.0
14.0
16.0
14.0
18.0
20.0
20.0
22.0
24.0
L2
8.0
8.0
8.0
10.0
8.0
10.0
12.0
8.0
10.0
12.0
8.0
10.0
8.0
12.0
12.0
12.0
12.0
12.0
D1
0.8
0.8
1.0
1.0
1.2
1.2
1.2
1.4
1.4
1.4
1.7
1.7
2.2
2.2
2.8
3.5
4.6
5.8
D2
1.8
2.0
2.6
2.6
2.8
2.8
2.8
3.0
3.0
3.0
3.5
3.5
4.2
4.2
4.8
6.3
7.1
8.8
S1
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.2
0.2
0.2
0.2
S2 Stripping length
0.25
10.0
0.25
10.0
0.25
10.0
0.25
12.0
0.25
10.0
0.25
12.0
0.25
14.0
0.25
10.0
0.25
12.0
0.25
15.0
0.25
10.0
0.25
12.0
0.25
10.0
0.25
14.0
0.3
15.0
0.3
14.0
0.4
14.0
0.4
15.0
Colour
l light blue
l turquoise
l orange
l orange
m white
m white
m white
l yellow
l yellow
l yellow
l red
l red
l blue
l blue
l grey
l black
l ivory
l green
Qty.
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
100
100
100
Order No.
9025760000
9025770000
0690700000
9025870000
0462900000
9025860000
9025910000
0463000000
9025950000
9025930000
0463100000
0635100000
9019160000
9019170000
9203630000
0533500000
9203620000
0565900000
AWG
26
24
22
20
20
18
18
18
17
17
16
L1
12.0
12.0
12.0
14.0
16.0
14.0
16.0
18.0
16.0
18.0
16.0
L2
8.0
8.0
8.0
8.0
10.0
8.0
10.0
12.0
10.0
12.0
10.0
D1
0.6
0.8
0.8
1.0
1.0
1.2
1.2
1.2
1.4
1.4
1.7
D2
1.5
1.8
2.0
2.6
2.6
2.8
2.8
2.8
3.0
3.0
3.5
S1
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
S2 Stripping length
0.25
10.0
0.25
10.0
0.25
10.0
0.25
10.0
0.25
12.0
0.25
10.0
0.25
12.0
0.25
14.0
0.25
12.0
0.25
15.0
0.25
12.0
Colour
l grey
● light blue
l turquoise
l orange
l orange
m white
m white
m white
l yellow
l yellow
l red
Qty.
500
500
500
500
500
500
500
500
500
500
500
Order No.
9028240000
9025780000
9025790000
9026060000
9028270000
9026070000
9028290000
9028300000
9028320000
9028340000
9028350000
1282250000 – 2012/2013
Accessories – Twin-wire end ferrules with plastic collar
/
$
'
6
6
Weidmüller colour code
packed loose
Type
PDU, PPE, PDK, PTR
For conductors each at 2 x 0.5 – 2 x 16 mm2 (2 x AWG 20 – 2 x AWG 6)
Material: E-Cu, tin galvanised
Dimensional tolerance acc. to DIN 46228 sect. 4
Ordering data
Type
H0.5/15
H0.5/16.5
H0.5/18.5
*H0.75/15
*H0.75/17
*H0.75/19S
*H0.75/24.5
*H1.0/25.6
*H1.5/25.6
**H2.5/26.5D
ø mm2
0.50
0.50
0.50
0.75
0.75
0.75
0.75
1.00
1.50
2.50
Note: * Voltage reduced to 320 V
Weidmüller colour code
packed loose
Type
PDL DU/PE
Hook-type cable connector
according to ESI 50-18 part 2
/
Terminals, P-Series
• EPolypropylene conical cable entry
• Heat-resistant up to 105 °C
• Cable entry made from non-flammable material on request
/
%
Ordering data
Type
H0.5/15
H0.5/16.5
H0.5/18.5
H0.75/15
H0.75/17
H0.75/19S
H0.75/24.5
H1.0/25.6
H1.5/25.6
H2.5/26.5D
ø mm2
0.50
0.50
0.50
0.75
0.75
0.75
0.75
1.00
1.50
2.50
Ordering data
Type
HB 1-17
HB 1-13
AWG
20
20
20
18
18
18
18
17
16
14
L1
15.0
16.0
19.0
15.0
17.0
19.0
24.0
25.0
26.0
27.0
L2
8.0
10.0
12.0
8.0
10.0
12.0
18.0
18.0
18.0
18.0
D1
1.4
1.4
1.4
1.7
1.7
1.4
1.7
2.0
2.2
2.8
D2
D1
1.4
1.4
1.4
1.7
1.7
1.4
1.7
2.0
2.2
2.8
D2
S1
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
S2 Stripping length
0.3
11.0
0.3
13.0
0.3
15.0
0.3
11.0
0.3
13.0
0.3
21.0
0.3
21.0
0.3
22.0
0.3
21.0
0.4
21.0
Colour
l orange
l orange
l orange
m white
m white
m white
m white
l yellow
l red
l blue
Qty.
500
500
500
500
500
500
500
500
100
100
Order No.
9037200000
9037210000
9037220000
9037230000
9037240000
9202820000
9037250000
9037280000
9037310000
9037520000
S1
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
S2 Stripping length
0.3
11.0
0.3
13.0
0.3
15.0
0.3
11.0
0.3
13.0
0.3
21.0
0.3
21.0
0.3
22.0
0.3
21.0
0.4
21.0
Colour
l orange
l orange
l orange
m white
m white
m white
m white
l yellow
l red
l blue
Qty.
500
500
500
500
500
500
500
500
100
100
Order No.
9037200000
9037210000
9037220000
9037230000
9037240000
9202820000
9037250000
9037280000
9037310000
9037520000
Qty.
100
100
Order No.
9036290000
9036300000
B
** Voltage reduced to 160 V
AWG
20
20
20
18
18
18
18
17
16
14
L1
15.0
16.0
19.0
15.0
17.0
19.0
24.0
25.0
26.0
27.0
L2
8.0
10.0
12.0
8.0
10.0
12.0
18.0
18.0
18.0
18.0
ø mm2
0.25 - 1.5
1.0 - 2.5
Colour
l
l
L1
27.2
27.2
L2
16.75
16.75
L3
4.6
3.0
%
/
1282250000 – 2012/2013
B.55
Terminals, P-Series
B
B.56
1282250000 – 2012/2013