Download

Contents
Terminals, Z-Series
1282250000 – 2012/2013
Terminals, Z-Series
Terminals, Z-Series
Overview Z-Series
C.2
Feed-through terminals
C.4
Double- / Multi-level terminals
C.20
Motor-connect terminal blocks
C.34
PE terminals
C.36
Fuse terminals
C.54
Test-disconnect terminals
C.66
Earth wire disconnect terminal blocks
C.71
Installation terminals
C.72
Overview WeiCoS
C.80
Pluggable standard terminals WeiCoS
C.82
Overview initiator and actuator terminals
C.108
Initiator and actuator terminals
C.110
Overview mini terminals
C.112
Mini terminals
C.114
Terminals with electronic components
C.120
Accessories Z-Series
C.128
C
C.1
Overview Z-Series
Terminals, Z-Series
A broad line of terminal block products
with tension-clamp wire connection
A proven solution for every application
The terminal blocks with their proven tensionclamp wire connection system, cannot fail to
impress, with their small design, a wide and deep
product range and many additional functions
and accessories for all applications in electrical
cabinet construction.
C
Terminals with tension-clamp connections
are tailored specially to the customer‘s
requirements: small design, generous
marking areas, integrated test point.
The Z-series terminals have a large
clamping range and up to two
cross-connection channels.
Plug-in standard cross-connections
enable potentials to be distributed
over any number of terminals.
Wemid insulating material
•Non-tracking, CTI 600
•Thermally stable up to 120 °C
•High UL94 flammability class V0
•Contains no halogen or phosphorous
C.2
Designs
Z-Standard with wire cross sections from
0.05 to 35 mm² and TOP entry wire insertion
parallel to the screwdriver actuators. Z-Roof
with wire cross sections from 0.13 to 16 mm²,
dimensions reduced by up to 36 % and oblique
operation direction.
1282250000 – 2012/2013
Overview Z-Series
Terminals, Z-Series
Safe, thanks to the clarity
Easy to use thanks to the large clamping space
for the wire connections from 0.08 to
35 mm², only one wire can be connected in
each clamping unit.
C
Simple operation
The practical connection aligns the wire
insertion direction and the screwdriver
operating points, creating a TOP
connection system for which no special
tools are needed and which comes with
an integrated test point.
Extensive accessories
Test adapters and plugs, standard
and group markers, closing plates and
partitions, covers, and reducing sleeves
are available for the Z-series.
1282250000 – 2012/2013
Contact security
The products have maintenance-free
connections for a life-long secure contact.
They are 100 % shock and vibration proof.
C.3
Terminals, Z-Series
Feed-through terminals
Standard form
ZDU 1.5
Z-series standard ranges provide solutions for conductor
cross-sections from 0.05 to 35 mm².
Two connections
1.5 mm²
ZDU 1.5/3 AN
1.5 mm²
Three connections
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
C
mm
A/mm²
mm²
Technical data
3.5 x 51.5 x 37
17.5 / 1.5
0.05...1.5
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
V
A
mm²
mm²
mm²
mm/-
Ex e II
IEC
500
17.5
1.5
T
3.5 x 63.5 x 37
17.5 / 1.5
0.05...1.5
II 2 G D
IEC 60947-7-1
Ex e II
IEC
500
17.5
1.5
T
II 2 G D
UL
CSA
EN 60079-7
300 (C)
300 (C)
550
15 (C)
20 (C)
15
AWG 26...14
AWG 26...14
1.5
6 kV / 3
B1 / V-0
KEMA 01ATEX2106 U
r #i~a
Rated connection
0.5...1.5
0.5...1.5 / 0.5...1.5
10 / 0.4 x 2.0 mm
UL
CSA
EN 60079-7
300 (C)
300 (C)
550
15 (C)
20 (C)
15
AWG 26...14
AWG 26...14
1.5
6 kV / 3
B1 / V-0
KEMA 01ATEX2106 U
r#i~a
Rated connection
0.5...1.5
0.5...1.5 / 0.5...1.5
10 / 0.4 x 2.0 mm
Type
ZDU 1.5
ZDU 1.5 BL
Order No.
1775480000
1775490000
Type
ZDU 1.5/3AN
ZDU 1.5/3AN BL
Note
Ordering data
Version
Dark beige Wemid
Blue Wemid
Qty.
100
100
Note
Qty.
100
100
Order No.
1775530000
1775540000
Accessories
Pluggable cross-connection
End plate / Partition plate
End bracket
Test adapter
Screwdriver
Reducing sleeves
Cover
Identification systems
2-pole
3-pole
4-pole
10-pole
20-/24-pole
Type
ZQV 1.5/2
ZQV 1.5/3
ZQV 1.5/4
ZQV 1.5/10
current
17.5 A
17.5 A
17.5 A
17.5 A
Qty.
60
60
60
20
Order No.
1776120000
1776130000
1776140000
1776200000
Type
ZQV 1.5/2
ZQV 1.5/3
ZQV 1.5/4
ZQV 1.5/10
current
17.5 A
17.5 A
17.5 A
17.5 A
Qty.
60
60
60
20
Order No.
1776120000
1776130000
1776140000
1776200000
Dark beige Wemid
Blue Wemid
ZAP/TW ZDU1.5/2AN
ZAP/TW ZDU1.5/2AN BL
Width
2 mm
2 mm
20
20
1776030000
1776040000
ZAP/TW ZDU1.5/3AN
ZAP/TW ZDU1.5/3AN BL
Width
2 mm
2 mm
20
20
1776060000
1776070000
Dark beige Wemid
ZEW 35
6 mm
20
9540000000
ZEW 35
6 mm
20
9540000000
Standard
With assembly peg
ZTA 5
ZTA 5/ZA
3.5 mm
3.5 mm
25
25
1776210000
1776220000
ZTA 5
ZTA 5/ZA
3.5 mm
3.5 mm
25
25
1776210000
1776220000
1
9037160000
SDS 0.4X2.0X60
1
9037160000
4.55 mm
4.55 mm
500
500
1781950000
1781960000
ZRH 1.5S/1
ZRH 1.5S/2
4.55 mm
4.55 mm
500
500
1781950000
1781960000
4.3 mm
20
1781940000
ZAD 7/4
4.3 mm
20
1781940000
Standard
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
With lightning flash symbol
(see assortment in catalogue 7)
Marking tags
SDS 0.4X2.0X60
ZRH 1.5S/1
ZRH 1.5S/2
ZAD 7/4
DEK 5/3,5 / WS 12/3,5
DEK 5/3,5 / WS 12/3,5
Note
C.4
1282250000 – 2012/2013
Feed-through terminals
1.5 mm²
Four connections
ZDU 1.5 2x2AN
1.5 mm²
2 x 2 connections
3.5 x 75.5 x 37
17.5 / 1.5
0.05...1.5
IEC 60947-7-1
Ex e II
IEC
500
17.5
1.5
T
II 2 G D
10 x 65 x 45.5
57 / 10
0.5...10
IEC 60947-7-1
IEC
500
17.5
1.5
6 mm²
Supply terminal
3.5 x 75.5 x 37
17.5 / 1.5
0.05...1.5
UL
CSA
EN 60079-7
300 (C)
300 (C)
550
15 (C)
20 (C)
15
AWG 26...14
AWG 26...14
1.5
6 kV / 3
B1 / V-0
KEMA 01ATEX2106 U
r#i~a
Rated connection
0.5...1.5
0.5...1.5 / 0.5...1.5
10 / 0.4 x 2.0 mm
ZEI 6
Terminals, Z-Series
ZDU 1.5/4 AN
C
IEC 60947-7-1
UL
CSA
IEC
500
41
6
6 kV / 3
B1 / V-0
UL
CSA
8 kV / 4
A5 / V-0
#
#
Rated connection
0.5...1.5
0.5...1.5 / 0.5...1.5
10 / 0.4 x 2.0 mm
Rated connection
0.5...10
0.5...10 / 0.5...6
13 / 1.0 x 5.5 mm
Rated voltage is reduced to 400 V or the rated voltage of the distribution
terminals.
Type
ZDU 1.5/4AN
ZDU 1.5/4AN BL
Qty.
100
100
Order No.
1775580000
1775600000
Type
ZDU 1.5/2X2AN
ZDU 1.5/2X2AN BL
Qty.
100
100
Order No.
1826970000
1826990000
Type
ZEI 6
Qty.
20
Order No.
1791190000
Integrated end plate.
Type
ZQV 1.5/2
ZQV 1.5/3
ZQV 1.5/4
ZQV 1.5/10
current
17.5 A
17.5 A
17.5 A
17.5 A
Qty.
60
60
60
20
Order No.
1776120000
1776130000
1776140000
1776200000
Type
ZQV 1.5/2
ZQV 1.5/3
ZQV 1.5/4
ZQV 1.5/10
ZAP/TW ZDU1.5/4AN
ZAP/TW ZDU1.5/4AN BL
Width
2 mm
2 mm
20
20
1776090000
1776100000
ZEW 35
6 mm
20
3.5 mm
3.5 mm
ZTA 5
ZTA 5/ZA
current
17.5 A
17.5 A
17.5 A
17.5 A
Qty.
60
60
60
20
Order No.
1776120000
1776130000
1776140000
1776200000
ZAP/TW ZDU1.5/4AN
ZAP/TW ZDU1.5/4AN BL
Width
2 mm
2 mm
20
20
1776090000
1776100000
9540000000
ZEW 35
6 mm
20
9540000000
ZEW 35
25
25
1776210000
1776220000
ZTA 5
ZTA 5/ZA
3.5 mm
3.5 mm
25
25
1776210000
1776220000
ZTA 3 ZDU6
1
9037160000
SDS 0.4X2.0X60
1
9037160000
SDIS SL 0.8X4.0X100
4.55 mm
4.55 mm
500
500
1781950000
1781960000
ZRH 1.5S/1
ZRH 1.5S/2
4.55 mm
4.55 mm
500
500
1781950000
1781960000
4.3 mm
20
1781940000
ZAD 7/4
4.3 mm
20
1781940000
SDS 0.4X2.0X60
ZRH 1.5S/1
ZRH 1.5S/2
ZAD 7/4
DEK 5/3,5 / WS 12/3,5
DEK 5/3,5 / WS 12/3,5
Type
ZQV 1.5/2
ZQV 1.5/3
ZQV 1.5/4
ZQV 1.5/10
ZAD 3/4
current
17.5 A
17.5 A
17.5 A
17.5 A
Qty.
60
60
60
20
Order No.
1776120000
1776130000
1776140000
1776200000
Width
6 mm
20
9540000000
8.1 mm
25
1654050000
1
1274670000
20
1609120000
10 mm
DEK 8 / WS 12/6
The plug-in cross-connections ZQV 1.5/... can be used.
1282250000 – 2012/2013
C.5
Terminals, Z-Series
Feed-through terminals
Standard form
ZDU 2.5
Z-series standard ranges provide solutions for conductor
cross-sections from 0.05 to 35 mm².
Two connections
2.5 mm²
ZDU 2.5/3AN
2.5 mm²
Three connections
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
C
mm
A/mm²
mm²
Technical data
5.1 x 59.5 x 39.5
31 / 4
0.05...4
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
V
A
mm²
mm²
mm²
mm/-
Ex e II
IEC
800
24
2.5
T
5.1 x 64.5 x 39.5
31 / 4
0.05...4
II 2 G D
UL
CSA
EN 60079-7
600 (C)
600 (C)
550
25 (C)
27 (C)
21
AWG 30...12
AWG 26...12
2.5
8 kV / 3
A3 / V-0
KEMA 97ATEX2521 U
?r u#i~a
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
IEC 60947-7-1
Ex e II
IEC
800
24
2.5
T
II 2 G D
UL
CSA
EN 60079-7
600 (C)
600 (C)
550
25 (C)
27 (C)
21
AWG 30...12
AWG 26...12
2.5
8 kV / 3
A3 / V-0
KEMA 97ATEX2521 U
?ru#i~a
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
Note
Ordering data
Version
Dark beige Wemid
Blue Wemid
Note
Type
ZDU 2.5
ZDU 2.5 BL
Qty.
100
100
Order No.
1608510000
1608520000
Type
ZDU 2.5/3AN
ZDU 2.5/3AN BL
Qty.
100
100
Order No.
1608540000
1608550000
The rated voltage is reduced to 400 V when using the cross-connection.
The rated voltage is reduced to 400 V when using the cross-connection.
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
Accessories
Pluggable cross-connection
End plate / Partition plate
End bracket
Test adapter
Screwdriver
Reducing sleeves
Cover
Identification systems
2-pole
3-pole
4-pole
10-pole
20-/24-pole
Dark beige Wemid
Blue Wemid
ZAP/TW 1
ZAP/TW 1 BL
Dark beige Wemid
ZEW 35
Standard
With assembly peg
ZTA 1
ZTA 1/ZA
Standard
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
With lightning flash symbol
(see assortment in catalogue 7)
Marking tags
current
24 A
24 A
24 A
24 A
24 A
Width
2 mm
2 mm
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
50
50
1608740000
1608750000
ZAP/TW 2 DB
ZAP/TW 2 BL
6 mm
20
9540000000
ZEW 35
5.1 mm
5.1 mm
25
25
1609040000
1609050000
ZTA 1
ZTA 1/ZA
1
1274660000
SDIS SL 0.6X3.5X100
5.55 mm 1000
5.55 mm 1000
1614300000
1614290000
ZRH 2.5/1 WS
ZRH 2.5/2 GR/V0
1609110000
ZAD 1/4
SDIS SL 0.6X3.5X100
ZRH 2.5/1 WS
ZRH 2.5/2 GR/V0
ZAD 1/4
DEK 5/5 / WS 10/5
8 mm
20
current
24 A
24 A
24 A
24 A
24 A
Width
2 mm
2 mm
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
50
50
1608770000
1608780000
6 mm
20
9540000000
5.1 mm
5.1 mm
25
25
1609040000
1609050000
1
1274660000
5.55 mm 1000
5.55 mm 1000
1614300000
1614290000
8 mm
20
1609110000
DEK 5/5 / WS 10/5
Note
C.6
1282250000 – 2012/2013
Feed-through terminals
ZDU 2.5/4AN
2.5 mm²
IEC 60947-7-1
Ex e II
IEC
800
24
2.5
T
5.1 x 79.5 x 39.5
30 / 4
0.05...4
II 2 G D
UL
CSA
EN 60079-7
600 (C)
600 (C)
550
25 (C)
27 (C)
21
AWG 30...12
AWG 26...12
2.5
8 kV / 3
A3 / V-0
KEMA 97ATEX2521 U
?ru#i~a
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
Type
ZDU 2.5/4AN
ZDU 2.5/4AN BL
ZAP/TW 3
ZAP/TW 3 BL
ZEW 35
ZTA 1
ZTA 1/ZA
Qty.
100
100
ZAD 1/4
DEK 5/5 / WS 10/5
1282250000 – 2012/2013
IEC 60947-7-1
Ex e II
IEC
800
24
2.5
T
Order No.
1608570000
1608580000
Type
ZDU 2.5/2X2AN
ZDU 2.5/2X2AN BL
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
Type
50
50
1608800000
1608810000
6 mm
20
5.1 mm
5.1 mm
Qty.
100
100
Order No.
1608600000
1608610000
current
Qty.
ZAP/TW 3
ZAP/TW 3 BL
Width
2 mm
2 mm
50
50
1608800000
1608810000
9540000000
ZEW 35
6 mm
20
9540000000
25
25
1609040000
1609050000
ZTA 1
ZTA 1/ZA
5.1 mm
5.1 mm
25
25
1609040000
1609050000
1
1274660000
SDIS SL 0.6X3.5X100
1
1274660000
5.55 mm 1000
5.55 mm 1000
1614300000
1614290000
ZRH 2.5/1 WS
ZRH 2.5/2 GR/V0
5.55 mm 1000
5.55 mm 1000
1614300000
1614290000
1609110000
ZAD 1/4
8 mm
20
C
II 2 G D
UL
CSA
EN 60079-7
600 (C)
600 (C)
550
25 (C)
27 (C)
21
AWG 26...12
AWG 26...12
2.5
8 kV / 3
A3 / V-0
KEMA 97ATEX2521 U
?ru#i~a
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
current
24 A
24 A
24 A
24 A
24 A
Width
2 mm
2 mm
SDIS SL 0.6X3.5X100
ZRH 2.5/1 WS
ZRH 2.5/2 GR/V0
2.5 mm²
Two potentials feasible
5.1 x 79.5 x 39.5
27 / 4
0.05...4
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
ZDU 2.5/2x2AN
Terminals, Z-Series
Four connections
8 mm
20
Order No.
1609110000
DEK 5/5 / WS 10/5
C.7
Terminals, Z-Series
Feed-through terminals
Standard form
ZDU 4
Z-series standard ranges provide solutions for conductor
cross-sections from 0.05 to 35 mm².
Two connections
4 mm²
ZDU 4/3 AN
4 mm²
Three connections
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
C
mm
A/mm²
mm²
Technical data
6.1 x 62 x 43.5
41 / 6
0.13...6
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
V
A
mm²
mm²
mm²
mm/-
Note
Ex e II
IEC
800
32
4
T
6.1 x 83.5 x 43.5
41 / 6
0.13...6
II 2 G D
UL
CSA
EN 60079-7
600 (C)
600 (C)
550
33 (C)
35 (C)
28
AWG 26...10
AWG 26...10
4
8 kV / 3
A4 / V-0
KEMA 97ATEX2521 U
?r u#i~a
Rated connection
0.5...6 / 0.5...6
0.5...6 / 0.5...4
12 / 0.6 x 3.5 mm
When using twin ferrules, the rated voltage is 690 V.
IEC 60947-7-1
Ex e II
IEC
800
32
4
T
II 2 G D
UL
CSA
EN 60079-7
600 (C)
600 (C)
550
33 (C)
35 (C)
28
AWG 26...10
AWG 26...10
4
8 kV / 3
A4 / V-0
KEMA 00ATEX2107 U
r #i~a
Rated connection
0.5...6 / 0.5...6
0.5...6 / 0.5...4
12 / 0.6 x 3.5 mm
When using twin ferrules, the rated voltage is 690 V.
Ordering data
Version
Dark beige Wemid
Blue Wemid
Type
ZDU 4
ZDU 4 BL
Qty.
100
100
Note
Order No.
1632050000
1632060000
Type
ZDU 4/3AN
ZDU 4/3AN BL
Qty.
50
50
Order No.
7904180000
7904190000
Accessories
Pluggable cross-connection
End plate / Partition plate
End bracket
Test adapter
Screwdriver
Reducing sleeves
Cover
Identification systems
2-pole
3-pole
4-pole
10-pole
20-/24-pole
Type
ZQV 4/2 GE
ZQV 4/3 GE
ZQV 4/4 GE
ZQV 4/10 GE
ZQV 4/20 GE
Dark beige Wemid
Blue Wemid
ZAP/TW 4
ZAP/TW 4 BL
Dark beige Wemid
ZEW 35
Standard
With assembly peg
ZTA 2 ZDU4
ZTA 2/ZA ZDU4
Standard
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
With lightning flash symbol
(see assortment in catalogue 7)
Marking tags
current
32 A
32 A
32 A
32 A
32 A
Width
2 mm
2 mm
Qty.
60
60
60
20
20
Order No.
1608950000
1608960000
1608970000
1609030000
1909010000
Type
ZQV 4/2 GE
ZQV 4/3 GE
ZQV 4/4 GE
ZQV 4/10 GE
ZQV 4/20 GE
50
50
1632090000
1632100000
ZAP/TW 4/3AN
ZAP/TW 4/3AN BL
6 mm
20
9540000000
ZEW 35
6.1 mm
6.1 mm
25
25
1609060000
1609070000
ZTA 2 ZDU4
ZTA 2/ZA ZDU4
1
1274660000
SDIS SL 0.6X3.5X100
7.4 mm 1000
7.4 mm 1000
1636640000
1636650000
ZRH 4/1 WS
ZRH 4/2
1609080000
ZAD 2/4
SDIS SL 0.6X3.5X100
ZRH 4/1 WS
ZRH 4/2
ZAD 2/4
DEK 5/6 / WS 10/6
8.94 mm
20
current
32 A
32 A
32 A
32 A
32 A
Width
2 mm
2 mm
Qty.
60
60
60
20
20
Order No.
1608950000
1608960000
1608970000
1609030000
1909010000
20
20
7904100000
7904110000
6 mm
20
9540000000
6.1 mm
6.1 mm
25
25
1609060000
1609070000
1
1274660000
7.4 mm 1000
7.4 mm 1000
1636640000
1636650000
8.94 mm
20
1609080000
DEK 5/6 / WS 12/6
Note
C.8
1282250000 – 2012/2013
Feed-through terminals
4 mm²
Four connections
ZDU 6
6 mm²
Two connections
6.1 x 104.5 x 43.5
41 / 6
0.13...6
IEC 60947-7-1
Ex e II
IEC
800
32
4
T
II 2 G D
When using twin ferrules, the rated voltage is 690 V.
Type
ZDU 4/4AN
ZDU 4/4AN BL
IEC 60947-7-1
Ex e II
IEC
800
41
6
T
8.1 x 90 x 45.5
57 / 10
0.22...10
II 2 G D
UL
CSA
EN 60079-7
600 (C)
600 (C)
550
50 (C)
50 (C)
36
AWG 22...8
AWG 20...8
6
8 kV / 3
A5 / V-0
KEMA 97ATEX2521 U
?ru#i~a
Rated connection
0.5...10
0.5...10 / 0.5...6
13 / 1.0 x 5.5 mm
The ZH 0.5 - ZH 2.5 twin ferrules can be used.
Qty.
50
50
Order No.
7904290000
7904300000
6 mm²
Three connections
8.1 x 65 x 45.5
57 / 10
0.22...10
UL
CSA
EN 60079-7
600 (C)
600 (C)
550
33 (C)
35 (C)
28
AWG 26...10
AWG 26...10
4
8 kV / 3
A4 / V-0
KEMA 00ATEX2107 U
r #i~a
Rated connection
0.5...6 / 0.5...6
0.5...6 / 0.5...4
12 / 0.6 x 3.5 mm
ZDU 6/3 AN
Type
ZDU 6
ZDU 6 BL
Terminals, Z-Series
ZDU 4/4 AN
IEC 60947-7-1
Ex e II
IEC
800
41
6
T
C
II 2 G D
UL
CSA
EN 60079-7
600 (C)
600 (C)
550
50 (C)
50 (C)
36
AWG 22...8
AWG 20...8
6
8 kV / 3
A5 / V-0
KEMA 00ATEX2107 U
r #i~a
Rated connection
0.5...10
0.5...10 / 0.5...6
13 / 1.0 x 5.5 mm
The ZH 0.5 - ZH 2.5 twin ferrules can be used.
Qty.
50
50
Order No.
1608620000
1608630000
Type
ZDU 6/3AN
ZDU 6/3AN BL
Qty.
50
50
Order No.
7907410000
7907420000
1000 V DC rated voltage tested.
Type
ZQV 4/2 GE
ZQV 4/3 GE
ZQV 4/4 GE
ZQV 4/10 GE
ZQV 4/20 GE
ZAP/TW4/4AN
ZAP/TW4/4AN BL
ZEW 35
ZTA 2 ZDU4
ZTA 2/ZA ZDU4
current
32 A
32 A
32 A
32 A
32 A
Width
2 mm
2 mm
Qty.
60
60
60
20
20
Order No.
1608950000
1608960000
1608970000
1609030000
1909010000
Type
ZQV 6/2 GE
ZQV 6/3 GE
ZQV 6/4 GE
current
41 A
41 A
41 A
Qty.
60
60
60
Order No.
1627850000
1627860000
1627870000
Type
ZQV 6/2 GE
ZQV 6/3 GE
ZQV 6/4 GE
current
41 A
41 A
41 A
Qty.
60
60
60
Order No.
1627850000
1627860000
1627870000
ZQV 6/24 GE
10
1908990000
ZQV 6/24 GE
1908990000
7904210000
7904220000
ZAP/TW 5
ZAP/TW 5 BL
50
50
1608830000
1608840000
ZAP/TW6/3AN
ZAP/TW6/3AN BL
41 A
Width
2 mm
2 mm
10
20
20
41 A
Width
2 mm
2 mm
20
20
7907370000
7907380000
6 mm
20
9540000000
ZEW 35
6 mm
20
9540000000
ZEW 35
6 mm
20
9540000000
6.1 mm
6.1 mm
25
25
1609060000
1609070000
ZTA 3 ZDU6
8.1 mm
25
1654050000
ZTA 3 ZDU6
8.1 mm
25
1654050000
1
1274660000
SDIS SL 1.0X4.5X125
1
1274680000
SDIS SL 1.0X4.5X125
1
1274680000
7.4 mm 1000
7.4 mm 1000
1636640000
1636650000
20
1609120000
ZAD 3/4
20
1609120000
SDIS SL 0.6X3.5X100
ZRH 4/1 WS
ZRH 4/2
ZAD 2/4
DEK 5/6 / WS 12/6
1282250000 – 2012/2013
8.94 mm
20
1609080000
ZAD 3/4
DEK 5/8 / WS 12/6
10 mm
10 mm
DEK 5/8 / WS 12/6
C.9
Terminals, Z-Series
Feed-through terminals
Standard form
ZDU 10
Z-series standard ranges provide solutions for conductor
cross-sections from 0.05 to 35 mm².
Two connections
10 mm²
ZDU 10/3AN
10 mm²
Three connections
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
10.1 x 73.5 x 50.5
72 / 16
1.31...16
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
V
A
mm²
mm²
mm²
mm/-
Note
Ex e II
IEC
800
57
10
T
10.1 x 99 x 50.5
57 / 16
1.31...16
II 2 G D
UL
CSA
EN 60079-7
600 (C)
600 (C)
550
60 (C)
55 (C)
50
AWG 16...6
AWG 16...6
10
8 kV / 3
A6 / V-0
KEMA 99ATEX5514 U
r #i~a
Rated connection
1.5...16 / 1.5...16
1.5...10 / 1.5...10
18 / 1.0 x 5.5 mm
IEC 60947-7-1
IEC
800
57
10
r#ia
Rated connection
1.5...16 / 1.5...16
1.5...10 / 1.5...10
18 / 1.0 x 5.5 mm
Ex e II
T
II 2 G D
UL
CSA
EN 60079-7
600 (C)
600 (C)
550
60 (C)
55 (C)
50
AWG 16...6
AWG 16...6
10
8 kV / 3
A6 / V-0
KEMA 00ATEX2107 U
Cross-connection of ZDU 10 and ZDU 16 is possible using the ZQV 16-10. Crossconnection of ZDU 10 and ZDU 35 is possible using the ZQV 35-10.
Cross-connection of ZDU 10 and ZDU 16 is possible using the ZQV 16-10. Crossconnection of ZDU 10 and ZDU 35 is possible using the ZQV 35-10.
Type
ZDU 10
ZDU 10 BL
Order No.
1746750000
1746760000
Type
ZDU 10/3AN
ZDU 10/3AN BL
Ordering data
Version
Dark beige Wemid
Blue Wemid
Qty.
25
25
Note
Qty.
20
20
Order No.
1767690000
1767700000
Accessories
Pluggable cross-connection
End plate / Partition plate
End bracket
Test adapter
Screwdriver
Reducing sleeves
Cover
Identification systems
Type
ZQV 10/2
current
17.5 A
Qty.
25
Order No.
1739680000
Type
ZQV 10/2
Dark beige Wemid
Blue Wemid
ZAP/TW ZDU10
ZAP/TW ZDU10 BL
Width
2.7 mm
2.7 mm
20
20
1748660000
1764110000
Dark beige Wemid
ZEW 35
6 mm
20
2-pole
3-pole
4-pole
10-pole
20-/24-pole
current
17.5 A
Qty.
25
Order No.
1739680000
ZAP/TW 10/16
ZAP/TW 10/16 BL
Width
3 mm
3 mm
20
20
1749580000
1768520000
9540000000
ZEW 35
6 mm
20
9540000000
1
1274680000
SDIS SL 1.0X4.5X125
1
1274680000
20
1746730000
ZAD 4/5
20
1746730000
Standard
With assembly peg
Standard
SDIS SL 1.0X4.5X125
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
With lightning flash symbol
(see assortment in catalogue 7)
Marking tags
ZAD 4/5
DEK 5/5 / WS 12/5
12.48 mm
12.48 mm
DEK 5/5 / WS 12/5
Note
C.10
1282250000 – 2012/2013
Feed-through terminals
16 mm²
Two connections
ZDU 16/3 AN
16 mm²
Three connections
12.1 x 82.5 x 51.5
98 / 25
1.5...25
IEC 60947-7-1
Ex e II
IEC
1000
76
16
T
II 2 G D
IEC 60947-7-1
IEC
800
76
16
r#ia
Rated connection
1.5...16 / 1.5...25
1.5...16 / 1.5...16
18 / 1.0 x 5.5 mm
16 mm²
Supply terminal
12.1 x 99 x 51.5
76 / 25
1.5...25
UL
CSA
EN 60079-7
600 (C)
600 (C)
550
65 (C)
65 (C)
66
AWG 14...4
AWG 14...4
16
8 kV / 3
A7 / V-0
KEMA 99ATEX5514 U
r #i~a
Rated connection
1.5...16 / 1.5...25
1.5...16 / 1.5...16
18 / 1.0 x 5.5 mm
ZEI 16
Ex e II
T
Terminals, Z-Series
ZDU 16
15 x 82.5 x 51.5
76 / 25
1.5...25
II 2 G D
UL
CSA
EN 60079-7
600 (C)
600 (C)
550
65 (C)
65 (C)
66
AWG 14...4
AWG 14...4
16
8 kV / 3
A7 / V-0
KEMA 00ATEX2107 U
C
IEC 60947-7-1
IEC
500
76
16
UL
CSA
600 (C)
600 (C)
65 (C)
65 (C)
AWG 14...4
AWG 14...4
8 kV / 3
A7 / V-0
r{ #i
Rated connection
1.5...16 / 1.5...25
1.5...16 / 1.5...16
18 / 1.0 x 5.5 mm
Cross-connection of ZDU 16 and ZDU 35 is possible using the ZQV 35-16. Crossconnection of ZDU 10 and ZDU 16 is possible using the ZQV 16-10.
Type
ZDU 16
ZDU 16 BL
Qty.
25
25
Order No.
1745230000
1745240000
Type
ZDU 16/3AN
ZDU 16/3AN BL
Qty.
20
20
Order No.
1768320000
1768330000
Type
ZEI 16
ZEI 16 BL
Qty.
20
20
Order No.
1745350000
1766240000
Integrated end plate.
Type
ZQV 16/2
current
76 A
Qty.
25
Order No.
1739690000
Type
ZAP/TW ZDU16
ZAP/TW ZDU16 BL
Width
3 mm
3 mm
20
20
1745150000
1764100000
ZEW 35
6 mm
20
SDIS SL 1.0X4.5X125
ZAD 5/5
14.15 mm
DEK 5/5 / WS 15/5
1282250000 – 2012/2013
current
Qty.
ZAP/TW 10/16
ZAP/TW 10/16 BL
Width
3 mm
3 mm
20
20
1749580000
1768520000
9540000000
ZEW 35
6 mm
20
9540000000
ZEW 35
1
1274680000
SDIS SL 1.0X4.5X125
1
1274680000
SDIS SL 1.0X4.5X125
20
1745210000
ZAD 5/5
20
1745210000
ZAD 5/5
DEK 5/5 / WS 15/5
14.15 mm
Order No.
Type
ZQV 2.5/2
ZQV 4/3 GE
ZQV 6/4 GE
current
24 A
32 A
41 A
Qty.
60
60
60
Order No.
1608860000
1608960000
1627870000
Width
6 mm
20
9540000000
1
1274680000
20
1745210000
14.15 mm
DEK 5/5 / WS 15/5
C.11
Terminals, Z-Series
Feed-through terminals
Standard form
ZDU 35
Z-series standard ranges provide solutions for conductor
cross-sections from 0.05 to 35 mm².
Two connections
35 mm²
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
16 x 100.5 x 59.5
125 / 35
2.5...35
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
V
A
mm²
IEC
800
125
35
r#~a
mm²
mm²
mm/-
Note
Rated connection
2.5...16 / 2.5...35
2.5...35 / 2.5...35
25 / 1.0 x 5.5 mm
Ex e II
T
II 2 G D
UL
CSA
EN 60079-7
600 (C)
600 (C)
550
120 (C)
120 (C)
109
AWG 12...2
AWG 12...2
35
8 kV / 3
A8 / V-0
KEMA 00ATEX2107 U
Cross-connection of ZDU 10 and ZDU 35 is possible using the ZQV 35-10. Crossconnection of ZDU 16 and ZDU 35 is possible using the ZQV 35-16.
Ordering data
Version
Dark beige Wemid
Blue Wemid
Note
Type
ZDU 35
ZDU 35 BL
Qty.
10
10
Order No.
1739620000
1739630000
Integrated end plate.
Accessories
Pluggable cross-connection
End plate / Partition plate
End bracket
Test adapter
Screwdriver
Reducing sleeves
Cover
Identification systems
2-pole
3-pole
4-pole
10-pole
20-/24-pole
Type
ZQV 35/2
Dark beige Wemid
Blue Wemid
Dark beige Wemid
ZEW 35
current
105 A
Qty.
10
Order No.
1739700000
Width
6 mm
20
9540000000
1
1274680000
20
1752620000
Standard
With assembly peg
Standard
SDIS SL 1.0X4.5X125
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
With lightning flash symbol
(see assortment in catalogue 7)
Marking tags
ZAD 6/5
18.74 mm
DEK 5/5 / WS 15/5
Note
C.12
1282250000 – 2012/2013
Terminals, Z-Series
C
1282250000 – 2012/2013
C.13
Terminals, Z-Series
Feed-through terminals
Roof-style
ZDU 2.5-2
The compact terminal range for conductor cross-sections
0.13 to 16 mm².
Two connections
2.5 mm²
ZDU 2.5-2/3AN
2.5 mm²
Three connections
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 50.5 x 44
24 / 4
0.13...4
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
V
A
mm²
IEC
800
24
2.5
r{u#
mm²
mm²
mm/-
Note
Ex e II
T
5.1 x 50.5 x 44
24 / 4
0.13...4
II 2 G D
UL
CSA
EN 60079-7
600 (C)
600 (C)
550
24 (C)
24 (C)
21
AWG 26...12
AWG 26...12
2.5
8 kV / 3
A2 / V-0
KEMA 97ATEX4677 U
Rated connection
0.5...4
0.5...2.5 / 0.5...2.5
10 / 0.6 x 3.5 mm
IEC 60947-7-1
Ex e II
IEC
800
24
2.5
T
II 2 G D
UL
CSA
EN 60079-7
600 (C)
600 (C)
550
20 (C)
23 (C)
21
AWG 26...12
AWG 26...14
2.5
8 kV / 3
A2 / V-0
KEMA 97ATEX4677 U
?r u#ia
Rated connection
0.5...4
0.5...2.5 / 0.5...2.5
10 / 0.6 x 3.5 mm
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
Type
ZDU 2.5-2
ZDU 2.5-2 BL
Type
ZDU 2.5-2/3AN
ZDU 2.5-2/3AN BL
Ordering data
Version
Dark beige Wemid
Blue Wemid
Note
Qty.
100
100
Order No.
1772060000
1772070000
Qty.
100
100
Order No.
1706010000
1706040000
The rated voltage is reduced to 400 V when using the cross-connection.
The rated voltage is reduced to 400 V when using the cross-connection.
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
Accessories
Pluggable cross-connection
End plate / Partition plate
End bracket
Test adapter
Screwdriver
Reducing sleeves
Cover
Identification systems
Note
C.14
2-pole
3-pole
4-pole
10-pole
20-/24-pole
Dark beige Wemid
Blue Wemid
ZAP/TW7
ZAP/TW7 BL
Dark beige Wemid
ZEW 35
With assembly peg
ZTA 4
Standard
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
With lightning flash symbol
(see assortment in catalogue 7)
Marking tags
current
24 A
24 A
24 A
24 A
24 A
Width
2.5 mm
2.5 mm
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
50
50
1706110000
1706120000
ZAP/TW7
ZAP/TW7 BL
6 mm
20
9540000000
ZEW 35
5.1 mm
25
1688110000
ZTA 4
1
1274660000
SDIS SL 0.6X3.5X100
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
ZRH 1.5H/1
ZRH 1.5H/2
1764560000
ZAD 1/4-2 GE
SDIS SL 0.6X3.5X100
ZRH 1.5H/1
ZRH 1.5H/2
ZAD 1/4-2 GE
8 mm
20
current
24 A
24 A
24 A
24 A
24 A
Width
2.5 mm
2.5 mm
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
50
50
1706110000
1706120000
6 mm
20
9540000000
5.1 mm
25
1688110000
1
1274660000
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
8 mm
20
1764560000
DEK 5/5 / WS 14/5
DEK 5/5 / WS 14/5
The rated voltage is decreased to 250 V when using the shielding rail LS 2.8
(1056400000).
The rated voltage is decreased to 250 V when using the shielding rail LS 2.8
(1056400000).
1282250000 – 2012/2013
Feed-through terminals
2.5 mm²
Four connections
ZDU 4-2
4 mm²
Two connections
5.1 x 50.5 x 44
24 / 4
0.13...4
IEC 60947-7-1
Ex e II
IEC
800
24
2.5
T
II 2 G D
4 mm²
Three connections
6.1 x 61.5 x 46
32 / 6
0.13...6
UL
CSA
EN 60079-7
600 (C)
600 (C)
550
20 (C)
23 (C)
21
AWG 26...12
AWG 26...14
2.5
8 kV / 3
A2 / V-0
KEMA 97ATEX4677 U
?r u#ia
Rated connection
0.5...4
0.5...2.5 / 0.5...2.5
10 / 0.6 x 3.5 mm
ZDU 4-2/3AN
IEC 60947-7-1
Ex e II
IEC
800
32
4
T
Terminals, Z-Series
ZDU 2.5-2/4AN
6.1 x 61.5 x 46
38 / 6
0.13...6
II 2 G D
IEC 60947-7-1
Ex e II
IEC
800
32
4
T
II 2 G D
UL
CSA
EN 60079-7
600 (C)
600 (C)
550
33 (C)
35 (C)
28
AWG 26...10
AWG 26...10
4
8 kV / 3
A3 / V-0
KEMA 97ATEX4677 U
ru#ia
Rated connection
0.5...6
0.5...4 / 0.5...4
10 / 0.6 x 3.5 mm
UL
CSA
EN 60079-7
600 (C)
600 (C)
550
33 (C)
35 (C)
28
AWG 26...10
AWG 26...10
4
8 kV / 3
A3 / V-0
KEMA 97ATEX4677 U
r u#ia
Rated connection
0.5...6
0.5...4 / 0.5...4
10 / 0.6 x 3.5 mm
Type
ZDU 4-2/2AN
ZDU 4-2/2AN BL
Type
ZDU 4-2/3AN
ZDU 4-2/3AN BL
C
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
Type
ZDU 2.5-2/4AN
ZDU 2.5-2/4AN BL
Qty.
100
100
Order No.
1706060000
1706070000
Qty.
100
100
Order No.
1770370000
1770840000
Qty.
100
100
Order No.
1770360000
1770860000
The wire cross section is decreased to 1.5 mm² when using the ZQB 2.5 for
single core and finely stranded wires.
The rated voltage is reduced to 400 V when using the cross-connection.
The rated voltage is reduced to 400 V when using the cross-connection.
Type
ZQB 2.5-2
current
24 A
Qty.
50
Order No.
1677120000
ZAP/TW7
ZAP/TW7 BL
Width
2.5 mm
2.5 mm
Type
ZQV 4/2 GE
ZQV 4/3 GE
ZQV 4/4 GE
ZQV 4/10 GE
ZQV 4/20 GE
50
50
1706110000
1706120000
ZAP ZDU4-2
ZAP ZDU4-2 BL
6 mm
20
9540000000
ZEW 35
5.1 mm
25
1688110000
ZTA 6/ZA
1
1274660000
SDIS SL 0.6X3.5X100
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
ZEW 35
ZTA 4
SDIS SL 0.6X3.5X100
ZRH 1.5H/1
ZRH 1.5H/2
ZAD 1/4-2 GE
8 mm
20
1764560000
ZAD 1/4
current
32 A
32 A
32 A
32 A
32 A
Width
2 mm
2 mm
Qty.
60
60
60
20
20
Order No.
1608950000
1608960000
1608970000
1609030000
1909010000
Type
ZQV 4/2 GE
ZQV 4/3 GE
ZQV 4/4 GE
ZQV 4/10 GE
ZQV 4/20 GE
50
50
1770400000
1770880000
ZAP ZDU4-2
ZAP ZDU4-2 BL
6 mm
20
9540000000
ZEW 35
6.1 mm
25
1780660000
ZTA 6/ZA
1
1274660000
SDIS SL 0.6X3.5X100
20
1609110000
ZAD 1/4
8 mm
current
32 A
32 A
32 A
32 A
32 A
Width
2 mm
2 mm
Qty.
60
60
60
20
20
Order No.
1608950000
1608960000
1608970000
1609030000
1909010000
50
50
1770400000
1770880000
6 mm
20
9540000000
6.1 mm
25
1780660000
1
1274660000
20
1609110000
8 mm
DEK 5/5 / WS 14/5
DEK 5/6 / WS 12/6
WS 12/6
The rated voltage is decreased to 250 V when using the shielding rail LS 2.8
(1056400000).
The rated voltage is decreased to 250 V when using the shielding rail LS 2.8
(1056400000).
The rated voltage is decreased to 250 V when using the shielding rail LS 2.8
(1056400000).
1282250000 – 2012/2013
C.15
Terminals, Z-Series
Feed-through terminals
Roof-style
ZDU 4-2/3AN LSC
The compact terminal range for conductor cross-sections
0.13 to 16 mm²
Three connections
4 mm²
ZDU 4-2/4AN
4 mm²
Four connections
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
6.1 x 61.5 x 46
38 / 6
0.13...6
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
IEC
800
32
4
V
A
mm²
Ex e II
UL
CSA
T
6.1 x 75.1 x 46
32 / 6
0.13...6
II 2 G D
EN 60079-7
550
28
4
8 kV / 3
A3 / V-0
KEMA 97ATEX4677 U
#
mm²
mm²
mm/-
Note
Rated connection
0.5...6
0.5...4 / 0.5...4
10 / 0.6 x 3.5 mm
IEC 60947-7-1
Ex e II
IEC
800
32
4
T
II 2 G D
UL
CSA
EN 60079-7
600 (C)
600 (C)
550
33 (C)
35 (C)
28
AWG 26...10
AWG 26...10
4
8 kV / 3
A3 / V-0
KEMA 97ATEX4677 U
ru#ia
Rated connection
0.5...6
0.5...4 / 0.5...4
10 / 0.6 x 3.5 mm
The ZDU 4-2/3AN LSC version can be mounted on a 40mm Lütze frame.
Ordering data
Version
Dark beige Wemid
Blue Wemid
Note
Type
ZDU 4-2/3AN LSC
Qty.
100
Order No.
1790520000
Type
ZDU 4-2/4AN
ZDU 4-2/4AN BL
Qty.
100
100
Order No.
1806980000
1806990000
The rated voltage is reduced to 400 V when using the cross-connection.
The rated voltage is reduced to 400 V when using the cross-connection.
Type
ZQV 4/2 GE
ZQV 4/3 GE
ZQV 4/4 GE
ZQV 4/10 GE
ZQV 4/20 GE
Accessories
Pluggable cross-connection
End plate / Partition plate
End bracket
Test adapter
Screwdriver
Reducing sleeves
Cover
Identification systems
Note
C.16
2-pole
3-pole
4-pole
10-pole
20-/24-pole
Dark beige Wemid
Blue Wemid
ZAP ZDU4-2
ZAP ZDU4-2 BL
Dark beige Wemid
ZEW 35
With assembly peg
ZTA 6/ZA
Standard
current
32 A
32 A
32 A
32 A
32 A
Width
2 mm
2 mm
Qty.
60
60
60
20
20
Order No.
1608950000
1608960000
1608970000
1609030000
1909010000
Type
ZQV 4/2 GE
ZQV 4/3 GE
ZQV 4/4 GE
ZQV 4/10 GE
ZQV 4/20 GE
50
50
1770400000
1770880000
ZAP ZDU4-2/4AN
ZAP ZDU4-2/4AN BL
6 mm
20
9540000000
ZEW 35
6.1 mm
25
1780660000
ZTA 6/ZA
1
1274660000
SDIS SL 0.6X3.5X100
20
1609110000
ZAD 1/4
SDIS SL 0.6X3.5X100
current
32 A
32 A
32 A
32 A
32 A
Width
2 mm
2 mm
Qty.
60
60
60
20
20
Order No.
1608950000
1608960000
1608970000
1609030000
1909010000
50
50
1807010000
1807020000
6 mm
20
9540000000
6.1 mm
25
1780660000
1
1274660000
20
1609110000
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
With lightning flash symbol
(see assortment in catalogue 7)
Marking tags
ZAD 1/4
8 mm
DEK 5/6 / WS 12/6
8 mm
DEK 5/6 / WS 12/6
The rated voltage is decreased to 250 V when using the shielding rail LS 2.8
(1056400000).
1282250000 – 2012/2013
Feed-through terminals
6 mm²
ZDU 6-2/3AN
Two connections
Three connections
8.1 x 68 x 50
41 / 10
0.22...10
8.1 x 68 x 50
41 / 10
0.22...10
IEC 60947-7-1
Ex e II
IEC
800
41
6
T
II 2 G D
UL
CSA
EN 60079-7
600 (C)
600 (C)
550
45 (C)
50 (C)
36
AWG 22...8
AWG 20...8
6
8 kV / 3
A5 / V-0
KEMA 97ATEX4677 U
ru#ia
Rated connection
0.5...10
0.5...10 / 0.5...6
12 / 0.6 x 3.5 mm, 0.8 x 4.0 mm
6 mm²
ZEI 16-2 /1 AN
16 mm²
Supply terminal
IEC 60947-7-1
Ex e II
IEC
800
41
6
T
Terminals, Z-Series
ZDU 6-2/2AN
14 x 61.5 x 51.5
76 / 25
1.5...25
II 2 G D
UL
CSA
EN 60079-7
600 (C)
600 (C)
550
45 (C)
50 (C)
36
AWG 22...8
AWG 20...8
6
8 kV / 3
A5 / V-0
KEMA 97ATEX4677 U
r u#ia
Rated connection
0.5...10
0.5...10 / 0.5...6
12 / 0.6 x 3.5 mm, 0.8 x 4.0 mm
C
IEC 60947-7-1
IEC
800
76
16
UL
CSA
600 (C)
600 (C)
65 (C)
65 (C)
AWG 14...4
AWG 14...4
6 kV / 3
A7 / V-0
ru#a
Rated connection
1.5...10 / 16...25
1.5...16 / 1.5...16
18 / 1.0 x 5.5 mm
Rated voltage is reduced to 400 V or the IP rated voltage of the distribution
terminals.
Type
ZDU 6-2/2AN
ZDU 6-2/2AN BL
Qty.
50
50
Order No.
1771380000
1771390000
Type
ZDU 6-2/3AN
ZDU 6-2/3AN BL
Qty.
50
50
Order No.
1771410000
1771420000
Type
ZEI 16-2/1AN
ZEI 16-2/1AN BL
Qty.
20
20
Order No.
1772940000
1772950000
The rated voltage is reduced to 400 V when using the cross-connection.
The rated voltage is reduced to 400 V when using the cross-connection.
Integrated end plate.
Type
ZQV 6/2 GE
ZQV 6/3 GE
ZQV 6/4 GE
current
41 A
41 A
41 A
Qty.
60
60
60
Order No.
1627850000
1627860000
1627870000
Type
ZQV 6/2 GE
ZQV 6/3 GE
ZQV 6/4 GE
current
41 A
41 A
41 A
Qty.
60
60
60
Order No.
1627850000
1627860000
1627870000
Type
ZQV 2.5/2
ZQV 4/3 GE
ZQV 6/4 GE
current
24 A
32 A
41 A
Qty.
60
60
60
Order No.
1608860000
1608960000
1627870000
ZQV 6/24 GE
10
1908990000
ZQV 6/24 GE
1908990000
50
1771440000
ZAP ZDU6-2
41 A
Width
2 mm
10
ZAP ZDU6-2
41 A
Width
2 mm
50
1771440000
ZAP/Z...16-2/1AN
Width
2.5 mm
10
1772970000
ZEW 35
6 mm
20
9540000000
ZEW 35
6 mm
20
9540000000
ZEW 35
6 mm
20
9540000000
8.1 mm
25
1780670000
ZTA 7/ZA
8.1 mm
25
1780670000
1
1274670000
SDIS SL 0.8X4.0X100
1
1274670000
1
1274680000
ZTA 7/ZA
SDIS SL 0.8X4.0X100
DEK 5/8
DEK 5/8
SDIS SL 1.0X4.5X125
DEK 8
The plug-in cross-connections ZQV 2.5/..., ZQV 4/... and ZQV 6/... can be used.
1282250000 – 2012/2013
C.17
Feed-through terminals
ZDU 2.5N
Compact style
2.5 mm²
Terminals, Z-Series
2 connections
ZDU 2.5N/3AN
2.5 mm²
3 connections
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 50.5 x 39
24 / 4
0.05...4
5.1 x 56.5 x 39
24 / 4
0.05...4
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
V
A
mm²
IEC
800
24
2.5
II 2 G D
UL
CSA
300 (C)
300 (C)
20 (C)
24 (C)
AWG 30...12
AWG 30...12
6 kV / 3
A2 / V-0
IEC 60947-7-1
IEC
800
24
2.5
II 2 G D
UL
CSA
300 (C)
300 (C)
20 (C)
24 (C)
AWG 30...12
AWG 30...12
6 kV / 3
A2 / V-0
r{#
r{#
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
Dark beige Wemid
Blue Wemid
Type
ZDU 2.5N
ZDU 2.5N BL
Order No.
1933700000
1933710000
Type
ZDU 2.5N/3AN
ZDU 2.5N/3AN BL
2-pole
3-pole
4-pole
10-pole
20-/24-pole
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
mm²
mm²
mm/-
Note
Rated connection
0.5...4 / 1.5...2.5
0.5...2.5 / 0.5...1.5
10 / 0.6 x 3.5 mm
Rated connection
0.5...4 / 1.5...2.5
0.5...2.5 / 0.5...1.5
10 / 0.6 x 3.5 mm
Ordering data
Version
Qty.
50
50
Note
Qty.
50
50
Order No.
1933720000
1933730000
Accessories
Pluggable cross-connection
End plate / Partition plate
End bracket
Test adapter
Screwdriver
Reducing sleeves
Cover
Identification systems
Note
C.18
Dark beige Wemid
ZAP/TW ZDU/ZPE 2.5N
Dark beige Wemid
ZEW 35
Standard
With assembly peg
ZTA ZT2.5
ZTA ZT2.5/ZA
Standard
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
With lightning flash symbol
(see assortment in catalogue 7)
Marking tags
current
24 A
24 A
24 A
24 A
24 A
Width
2 mm
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
20
1933790000
ZAP/TW ZDU/ZPE 2.5N/3AN
6 mm
20
9540000000
ZEW 35
5.1 mm
5.1 mm
25
25
1827080000
1847600000
ZTA ZT2.5
ZTA ZT2.5/ZA
1
1274660000
SDIS SL 0.6X3.5X100
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
ZRH 1.5H/1
ZRH 1.5H/2
1934160000
ZAD 9/4
SDIS SL 0.6X3.5X100
ZRH 1.5H/1
ZRH 1.5H/2
ZAD 9/4
6 mm
20
current
24 A
24 A
24 A
24 A
24 A
Width
2 mm
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
50
1933800000
6 mm
20
9540000000
5.1 mm
5.1 mm
25
25
1827080000
1847600000
1
1274660000
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
6 mm
20
1934160000
DEK 5/5 / WS 10/5
DEK 5/5 / WS 10/5
2.5 mm² wires with wire ferrules including the plastic collar only clampable with
diameter-optimised collar ( Order no. 1333100000, pack of 500).
2.5 mm² wires with wire ferrules including the plastic collar only clampable with
diameter-optimised collar ( Order no. 1333100000, pack of 500).
1282250000 – 2012/2013
Feed-through terminals
ZDU 2.5N/4AN
2.5 mm²
Terminals, Z-Series
4 connections
5.1 x 60 x 39
24 / 4
0.05...4
IEC 60947-7-1
IEC
800
24
2.5
II 2 G D
UL
CSA
300 (C)
300 (C)
20 (C)
24 (C)
AWG 30...12
AWG 30...12
6 kV / 3
A2 / V-0
C
r{#
Rated connection
0.5...4 / 1.5...2.5
0.5...2.5 / 0.5...1.5
10 / 0.6 x 3.5 mm
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
Type
ZDU 2.5N/4AN
ZDU 2.5N/4AN BL
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
ZAP/TW ZDU/ZPE 2.5N/4AN
ZEW 35
ZTA ZT2.5
ZTA ZT2.5/ZA
Qty.
50
50
current
24 A
24 A
24 A
24 A
24 A
Width
2 mm
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
50
1933810000
6 mm
20
9540000000
5.1 mm
5.1 mm
25
25
1827080000
1847600000
1
1274660000
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
SDIS SL 0.6X3.5X100
ZRH 1.5H/1
ZRH 1.5H/2
ZAD 9/4
Order No.
1933740000
1933750000
6 mm
20
1934160000
DEK 5/5 / WS 10/5
2.5 mm² wires with wire ferrules including the plastic collar only clampable with
diameter-optimised collar ( Order no. 1333100000, pack of 500).
1282250000 – 2012/2013
C.19
Terminals, Z-Series
Double- / Multi-level terminals
Standard form
ZDK 1.5
Z-series standard ranges provide solutions for conductor
cross-sections from 0.05 to 35 mm².
Double-level terminal
1.5 mm²
ZDK 1.5V
1.5 mm²
Vertically cross-connected double-level terminal
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
3.5 x 75.5 x 50
17.5 / 1.5
0.05...1.5
3.5 x 75.5 x 50
17.5 / 1.5
0.05...1.5
IEC 60947-7-1
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
IEC
500
17.5
1.5
V
A
mm²
UL
CSA
300 (D)
600 (C)
10 (D)
10 (C)
AWG 28...16
AWG 28...16
6 kV / 3
B1 / V-0
IEC
500
17.5
1.5
r{#
mm²
mm²
mm/-
UL
CSA
300 (D)
600 (C)
10 (D)
10 (C)
AWG 28...16
AWG 28...16
6 kV / 3
B1 / V-0
r{#
Rated connection
0.5...1.5
0.5...1.5 / 0.5...1.5
10 / 0.4 x 2.0 mm
Rated connection
0.5...1.5
0.5...1.5 / 0.5...1.5
10 / 0.4 x 2.0 mm
Note
Ordering data
Version
Dark beige Wemid
Blue Wemid
Type
ZDK 1.5
ZDK 1.5 BL
Qty.
100
100
Note
Order No.
1791100000
1791110000
Type
ZDK 1.5V
ZDK 1.5V BL
Order No.
Type
current
Qty.
Qty.
100
100
Order No.
1791130000
1791140000
Accessories
Pluggable cross-connection
End plate / Partition plate
End bracket
Test adapter
Screwdriver
Reducing sleeves
Identification systems
Type
current
Qty.
ZQV 1.5/2
ZQV 1.5/3
ZQV 1.5/4
ZQV 1.5/10
17.5 A
17.5 A
17.5 A
17.5 A
60
60
60
20
1776120000
1776130000
1776140000
1776200000
ZQV 1.5/2
ZQV 1.5/3
ZQV 1.5/4
ZQV 1.5/10
17.5 A
17.5 A
17.5 A
17.5 A
60
60
60
20
1776120000
1776130000
1776140000
1776200000
Dark beige Wemid
Blue Wemid
ZAP/TW ZDK1.5
ZAP/TW ZDK1.5 BL
Width
2 mm
2 mm
20
20
1791160000
1791170000
ZAP/TW ZDK1.5
ZAP/TW ZDK1.5 BL
Width
2 mm
2 mm
20
20
1791160000
1791170000
Dark beige Wemid
ZEW 35
6 mm
20
9540000000
ZEW 35
6 mm
20
9540000000
Standard
With assembly peg
ZTA 5
ZTA 5/ZA
3.5 mm
3.5 mm
25
25
1776210000
1776220000
ZTA 5
ZTA 5/ZA
3.5 mm
3.5 mm
25
25
1776210000
1776220000
1
9037160000
SDS 0.4X2.0X60
1
9037160000
500
500
1781950000
1781960000
ZRH 1.5S/1
ZRH 1.5S/2
500
500
1781950000
1781960000
1.5-pole
2-pole
3-pole
4-pole
10-pole
20-/24-pole
Standard
With “swifty set” cutting device
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
(see assortment in catalogue 7)
Marking tags
SDS 0.4X2.0X60
ZRH 1.5S/1
ZRH 1.5S/2
DEK 5/3,5
4.55 mm
4.55 mm
4.55 mm
4.55 mm
Order No.
DEK 5/3,5
Note
C.20
1282250000 – 2012/2013
Double- / Multi-level terminals
ZDK 1.5 DU-PE
1.5 mm²
Terminals, Z-Series
Double-level terminals (DU - PE)
3.5 x 75.5 x 50
17.5 / 1.5
0.05...1.5
PE
C
IEC 60947-7-1 (-7-2)
IEC
500
17.5
1.5
UL
CSA
300 (D)
10 (D)
AWG 28...16
AWG 28...16
6 kV / 3
B1 / V-0
r{#
Rated connection
0.5...1.5
0.5...1.5 / 0.5...1.5
10 / 0.4 x 2.0 mm
Type
ZDK 1.5DU-PE
Qty.
100
Order No.
1791120000
Upper level: feed-through terminal
Lower level: PE terminal
Type
current
Qty.
ZQV 1.5/2
ZQV 1.5/3
ZQV 1.5/4
ZQV 1.5/10
17.5 A
17.5 A
17.5 A
17.5 A
60
60
60
20
1776120000
1776130000
1776140000
1776200000
ZAP/TW ZDK1.5
ZAP/TW ZDK1.5 BL
Width
2 mm
2 mm
20
20
1791160000
1791170000
ZEW 35
6 mm
20
9540000000
3.5 mm
3.5 mm
25
25
1776210000
1776220000
1
9037160000
500
500
1781950000
1781960000
ZTA 5
ZTA 5/ZA
SDS 0.4X2.0X60
ZRH 1.5S/1
ZRH 1.5S/2
4.55 mm
4.55 mm
Order No.
DEK 5/3,5
1282250000 – 2012/2013
C.21
Terminals, Z-Series
Double- / Multi-level terminals
Standard form
ZDK 2.5
Z-series standard ranges provide solutions for conductor
cross-sections from 0.05 to 35 mm².
Double-level terminal
2.5 mm²
ZDK 2.5 V
2.5 mm²
Vertically cross-connected double-level terminal
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 79.5 x 54
20 / 2.5
0.05...2.5
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
V
A
mm²
mm²
mm²
mm/-
Note
Ex e II
IEC
500
20
2.5
T
5.1 x 79.5 x 54
20 / 2.5
0.05...2.5
II 2 G D
UL
CSA
EN 60079-7
300 (C)
300 (C)
275
15 (C)
25 (C)
18
AWG 26...14
AWG 26...12
2.5
6 kV / 3
A2 / V-0
KEMA 97ATEX4677 U
r u#ia
Rated connection
0.5...2.5
0.5...2.5 / 0.5...2.5
10 / 0.6 x 3.5 mm
IEC 60947-7-1
IEC
500
20
2.5
r #ia
Ex e II
T
II 2 G D
UL
CSA
EN 60079-7
300 (C)
300 (D)
275
15 (C)
10 (D)
20
AWG 26...14
AWG 26...12
2.5
6 kV / 3
A2 / V-0
KEMA 97ATEX4677 U
Rated connection
0.5...2.5
0.5...2.5 / 0.5...2.5
10 / 0.6 x 3.5 mm
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
Type
ZDK 2.5
ZDK 2.5 BL
Type
ZDK 2.5V
ZDK 2.5V BL
Ordering data
Version
Dark beige Wemid
Blue Wemid
Note
Qty.
50
50
Order No.
1674300000
1678630000
Qty.
50
50
Order No.
1689990000
1745880000
ZBS 1 component plug ZBS 1 can be used for LED (1764550000).
Accessories
Pluggable cross-connection
End plate / Partition plate
End bracket
Test adapter
Screwdriver
Reducing sleeves
Identification systems
Note
C.22
1.5-pole
2-pole
3-pole
4-pole
10-pole
20-/24-pole
Type
current
Qty.
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
24 A
24 A
24 A
24 A
24 A
Width
1.5 mm
1.5 mm
Dark beige Wemid
Blue Wemid
ZAP/TW ZDK2.5
ZAP/TW ZDK2.5 BL
Dark beige Wemid
ZEW 35
Standard
With assembly peg
ZTA 4
Standard
With “swifty set” cutting device
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
(see assortment in catalogue 7)
Marking tags
SDIS SL 0.6X3.5X100
ZRH 1.5H/1
ZRH 1.5H/2
Order No.
Type
current
Qty.
60
60
60
20
20
1608860000
1608870000
1608880000
1608940000
1908960000
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
60
60
60
20
20
1608860000
1608870000
1608880000
1608940000
1908960000
20
20
1674730000
1748800000
ZAP/TW ZDK2.5
ZAP/TW ZDK2.5 BL
24 A
24 A
24 A
24 A
24 A
Width
1.5 mm
1.5 mm
20
20
1674730000
1748800000
6 mm
20
9540000000
ZEW 35
6 mm
20
9540000000
5.1 mm
25
1688110000
ZTA 4
5.1 mm
25
1688110000
1
1274660000
SDIS SL 0.6X3.5X100
1
1274660000
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
ZRH 1.5H/1
ZRH 1.5H/2
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
DEK 5/5 / WS 12/5
Order No.
DEK 5/5 / WS 10/5
ZVQ 2.5/15 (1720700000) connects two busbars, one above the other.
1282250000 – 2012/2013
Double- / Multi-level terminals
2.5 mm²
Phase - PE conductor
IEC 60947-7-1 (-7-2)
r#ia
2.5 mm²
Neutral conductor - phase
5.1 x 79.5 x 54
24 / 2.5
0.05...2.5
IEC
500
20
2.5
ZDK 2.5 N-DU
Ex e II
T
PE
5.1 x 79.5 x 54
23 / 2.5
0.05...2.5
II 2 G D
IEC 60947-7-1
UL
CSA
EN 60079-7
300 (C)
300 (D)
275
15 (C)
10 (D)
20
AWG 26...14
AWG 26...12
2.5
6 kV / 3
A2 / V-0
KEMA 97ATEX4677 U
Rated connection
0.5...2.5
0.5...2.5 / 0.5...2.5
10 / 0.6 x 3.5 mm
IEC
500
20
2.5
r#ia
ZDK 2.5 N-PE
2.5 mm²
Neutral & PE conductor
N
Ex e II
T
II 2 G D
UL
CSA
EN 60079-7
300 (C)
300 (D)
275
15 (C)
10 (D)
20
AWG 26...14
AWG 26...12
2.5
6 kV / 3
A2 / V-0
KEMA 97ATEX4677 U
Rated connection
0.5...2.5
0.5...2.5 / 0.5...2.5
10 / 0.6 x 3.5 mm
Terminals, Z-Series
ZDK 2.5 DU-PE
5.1 x 79.5 x 54
24 / 2.5
0.05...2.5
N
PE
IEC 60947-7-1 (-7-2)
IEC
500
20
2.5
r#ia
Ex e II
T
II 2 G D
UL
CSA
EN 60079-7
300 (C)
300 (D)
275
15 (C)
10 (D)
20
AWG 26...14
AWG 26...12
2.5
6 kV / 3
A2 / V-0
KEMA 97ATEX4677 U
Rated connection
0.5...2.5
0.5...2.5 / 0.5...2.5
10 / 0.6 x 3.5 mm
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
Type
ZDK 2.5DU-PE
Order No.
1689970000
Type
ZDK 2.5N-DU
Order No.
1689960000
Type
ZDK 2.5N-PE
Order No.
Type
current
Qty.
Order No.
Type
current
Qty.
24 A
24 A
24 A
24 A
24 A
Width
1.5 mm
1.5 mm
60
60
60
20
20
1608860000
1608870000
1608880000
1608940000
1908960000
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
60
60
60
20
20
1608860000
1608870000
1608880000
1608940000
1908960000
20
20
1674730000
1748800000
ZAP/TW ZDK2.5
ZAP/TW ZDK2.5 BL
24 A
24 A
24 A
24 A
24 A
Width
1.5 mm
1.5 mm
20
20
1674730000
1748800000
6 mm
20
9540000000
ZEW 35
6 mm
20
9540000000
5.1 mm
25
1688110000
ZTA 4
5.1 mm
25
1688110000
1
1274660000
SDIS SL 0.6X3.5X100
1
1274660000
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
ZRH 1.5H/1
ZRH 1.5H/2
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
Qty.
50
Type
current
Qty.
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
24 A
24 A
24 A
24 A
24 A
Width
1.5 mm
1.5 mm
60
60
60
20
20
1608860000
1608870000
1608880000
1608940000
1908960000
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
20
20
1674730000
1748800000
ZAP/TW ZDK2.5
ZAP/TW ZDK2.5 BL
6 mm
20
9540000000
ZEW 35
5.1 mm
25
1688110000
ZTA 4
1
1274660000
SDIS SL 0.6X3.5X100
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
ZRH 1.5H/1
ZRH 1.5H/2
ZAP/TW ZDK2.5
ZAP/TW ZDK2.5 BL
ZEW 35
ZTA 4
SDIS SL 0.6X3.5X100
ZRH 1.5H/1
ZRH 1.5H/2
DEK 5/5 / WS 12/5
1282250000 – 2012/2013
DEK 5/5 / WS 12/5
Qty.
50
C
Qty.
50
Order No.
1689980000
Order No.
DEK 5/5 / WS 12/5
C.23
Terminals, Z-Series
Double- / Multi-level terminals
Standard form
ZDLD 2.5-2 N
Z-series standard ranges provide solutions for conductor
cross-sections from 0.05 to 35 mm².
Three levels
2.5 mm²
ZDLD 2.5-2 VN
2.5 mm²
Vertically cross-connected multi-level terminal
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
V
A
mm²
mm²
mm²
mm/-
Note
5.1 x 110.5 x 70
20 / 2.5
0.13...2.5
5.1 x 110.5 x 70
20 / 2.5
0.13...2.5
IEC 60947-7-1
IEC 60947-7-1
IEC
500
20
2.5
UL
CSA
300 (D)
300 (D)
10 (D)
10 (D)
AWG 26...12
AWG 26...12
6 kV / 3
A2 / V-0
IEC
400
20
2.5
UL
CSA
300 (D)
300 (D)
10 (D)
10 (D)
AWG 26...12
AWG 26...12
6 kV / 3
A2 / V-0
r#a
r#a
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
Type
ZDLD 2.5-2N
ZDLD 2.5-2N BL
Order No.
1782300000
1782310000
Type
ZDLD 2.5-2VN
ZDLD 2.5-2VN BL
Rated connection
0.5...2.5
0.5...2.5 / 0.5...2.5
10 / 0.6 x 3.5 mm
Rated connection
0.5...2.5
0.5...2.5 / 0.5...2.5
10 / 0.6 x 3.5 mm
Ordering data
Version
Dark beige Wemid
Blue Wemid
Qty.
50
50
Note
Qty.
25
25
Order No.
1782320000
1782330000
Accessories
Pluggable cross-connection
End plate / Partition plate
End bracket
Test adapter
Screwdriver
Reducing sleeves
Identification systems
Note
C.24
1.5-pole
2-pole
3-pole
4-pole
10-pole
20-/24-pole
Type
ZVQ 2.5/1.5
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
current
23 A
24 A
24 A
24 A
24 A
24 A
Width
1.5 mm
1.5 mm
Qty.
50
60
60
60
20
20
Order No.
1720700000
1608860000
1608870000
1608880000
1608940000
1908960000
Type
current
Qty.
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
60
60
60
20
20
1608860000
1608870000
1608880000
1608940000
1908960000
20
20
1782340000
1782350000
ZAP/TW ZDLD2.5-2N
ZAP/TW ZDLD2.5-2N BL
24 A
24 A
24 A
24 A
24 A
Width
1.5 mm
1.5 mm
20
20
1782340000
1782350000
6 mm
20
9540000000
ZEW 35
6 mm
20
9540000000
Order No.
Dark beige Wemid
Blue Wemid
ZAP/TW ZDLD2.5-2N
ZAP/TW ZDLD2.5-2N BL
Dark beige Wemid
ZEW 35
Standard
With assembly peg
ZTA 4
5.1 mm
25
1688110000
ZTA 4
5.1 mm
25
1688110000
SDIS SL 0.6X3.5X100
SWIFTY SET
18 mm
1
1
1274660000
9006060000
SDIS SL 0.6X3.5X100
SWIFTY SET
18 mm
1
1
1274660000
9006060000
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
ZRH 1.5H/1
ZRH 1.5H/2
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
Standard
With “swifty set” cutting device
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
(see assortment in catalogue 7)
Marking tags
ZRH 1.5H/1
ZRH 1.5H/2
DEK 5/5 / WS 12/5
DEK 5/5 / WS 12/5
ZVQ 2.5/15 (1720700000) connects two busbars, one above the other.
1282250000 – 2012/2013
Double- / Multi-level terminals
2.5 mm²
ZDLD 2.5-2 N PE/L/N
2.5 mm²
NEW
5.1 x 110.5 x 70
/ 2.5
0.08...2.5
IEC
500
20
2.5
IEC
500
20
2.5
ra
UL
CSA
150 (C)
150 (C)
15 (C)
15 (C)
AWG 26...12
AWG 26...12
6 kV / 3
A2 / V-0
Qty.
50
Order No.
1131750000
Type
ZDLD 2.5-2N/PE/L/N
Type
ZVQ 2.5/1.5
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
current
23 A
24 A
24 A
24 A
24 A
Qty.
50
60
60
60
20
Order No.
1720700000
1608860000
1608870000
1608880000
1608940000
ZAP/TW ZDLD2.5-2N
ZAP/TW ZDLD2.5-2N BL
Width
1.5 mm
1.5 mm
Type
ZVQ 2.5/1.5
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
20
20
1782340000
1782350000
ZAP/TW ZDLD2.5-2N
ZAP/TW ZDLD2.5-2N BL
6 mm
20
9540000000
ZEW 35
ZTA 4
5.1 mm
25
1688110000
SDIS SL 0.6X3.5X100
SWIFTY SET
18 mm
1
1
4.85 mm 1000
4.85 mm 1000
ZEW 35
ZRH 1.5H/1
ZRH 1.5H/2
DEK 5/5 / WS 12/5
1282250000 – 2012/2013
IEC
500
20
2.5
UL
AWG 26...12
AWG 26...12
6 kV / 3
A2 / V-0
Rated connection
0.5...2.5
0.5...2.5 / 0.5...1.5
10 / 0.6 x 3.5 mm
Qty.
50
Order No.
1131760000
Type
ZDLD 2.5-2N PE
current
23 A
24 A
24 A
24 A
24 A
24 A
Width
1.5 mm
1.5 mm
Qty.
50
60
60
60
20
20
Order No.
1720700000
1608860000
1608870000
1608880000
1608940000
1908960000
Type
ZVQ 2.5/1.5
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
20
20
1782340000
1782350000
ZAP/TW ZDLD2.5-2N
ZAP/TW ZDLD2.5-2N BL
6 mm
20
9540000000
ZEW 35
ZTA 4
5.1 mm
25
1688110000
1274660000
9006060000
SDIS SL 0.6X3.5X100
SWIFTY SET
18 mm
1
1
1678810000
1678800000
ZRH 1.5H/1
ZRH 1.5H/2
4.85 mm 1000
4.85 mm 1000
DEK 5/5 / WS 12/5
C
CSA
ra
Rated connection
0.5...2.5
0.5...2.5 / 0.5...1.5
10 / 0.6 x 3.5 mm
Type
ZDLD 2.5-2N/PE/L/L
NEW
5.1 x 110.5 x 70
/ 2.5
0.08...2.5
ra
Rated connection
0.5...2.5
0.5...2.5 / 0.5...1.5
10 / 0.6 x 3.5 mm
2.5 mm²
NEW
5.1 x 110.5 x 70
/ 2.5
0.08...2.5
UL
CSA
150 (C)
150 (C)
15 (C)
15 (C)
AWG 26...12
AWG 26...12
6 kV / 3
A2 / V-0
ZDLD 2.5-2 N PE
Terminals, Z-Series
ZDLD 2.5-2 N PE/L/L
Qty.
50
Order No.
1131740000
current
23 A
24 A
24 A
24 A
24 A
24 A
Width
1.5 mm
1.5 mm
Qty.
50
60
60
60
20
20
Order No.
1720700000
1608860000
1608870000
1608880000
1608940000
1908960000
20
20
1782340000
1782350000
6 mm
20
9540000000
ZTA 4
5.1 mm
25
1688110000
1274660000
9006060000
SDIS SL 0.6X3.5X100
SWIFTY SET
18 mm
1
1
1274660000
9006060000
1678810000
1678800000
ZRH 1.5H/1
ZRH 1.5H/2
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
DEK 5/5 / WS 12/5
C.25
Double- / Multi-level terminals
ZVLD 2.5
2.5 mm²
Terminals, Z-Series
Standard form
NEW
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 148 x 86
/ 2.5
0.14...2.5
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
V
A
mm²
IEC
250
24
2.5
UL
CSA
6 kV / 3
/ V-0
mm²
mm²
mm/-
Rated connection
0.5...2.5 / 0.5...2.5
0.5...2.5 / 0.5...2.5
Note
Ordering data
Version
Dark beige Wemid
Blue Wemid
Type
ZVLD 2.5
Qty.
50
Order No.
1208920000
Note
Accessories
Pluggable cross-connection
End plate / Partition plate
End bracket
Test adapter
Screwdriver
Reducing sleeves
Identification systems
1.5-pole
2-pole
3-pole
4-pole
10-pole
20-/24-pole
Type
ZVQ 2.5/1.5
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
Dark beige Wemid
Blue Wemid
ZAP ZVLD 2.5
Dark beige Wemid
ZEW 35/2
Standard
With assembly peg
ZTA ZVLD
ZTA ZVLD/ZA
current
23 A
24 A
24 A
24 A
24 A
24 A
Width
1.5 mm
Qty.
50
60
60
60
20
20
Order No.
1720700000
1608860000
1608870000
1608880000
1608940000
1908960000
10
1210410000
8 mm
20
8630740000
5.1 mm
5.1 mm
50
50
1210390000
1271870000
Standard
With “swifty set” cutting device
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
(see assortment in catalogue 7)
Marking tags
DEK 5/5
Note
C.26
1282250000 – 2012/2013
Terminals, Z-Series
C
1282250000 – 2012/2013
C.27
Terminals, Z-Series
Double- / Multi-level terminals
Roof-style
ZDK 2.5-2
The compact terminal range for conductor cross-sections
0.13 to 16 mm²
Double-level terminal
2.5 mm²
ZDK 2.5-2V
2.5 mm²
Vertical cross-connected double-level terminal
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 72.5 x 55.5
24 / 4
0.05...4
5.1 x 72.5 x 55.5
24 / 4
0.05...4
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
V
A
mm²
mm²
mm²
mm/-
Note
IEC
800
24
2.5
II 2 G D
UL
CSA
600 (C)
600 (C)
20 (C)
25 (C)
AWG 30...12
AWG 30...12
8 kV / 3
A2 / V-0
IEC 60947-7-1
IEC
800
24
2.5
II 2 G D
UL
CSA
600 (C)
300 (D)
20 (C)
10 (D)
AWG 30...12
AWG 30...12
8 kV / 3
A2 / V-0
r{ #i
r{#
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
Type
ZDK 2.5-2
ZDK 2.5-2 BL
Type
ZDK 2.5-2V
ZDK 2.5-2V BL
Rated connection
0.5...4
0.5...2.5 / 0.5...2.5
10 / 0.6 x 3.5 mm
Rated connection
0.5...4
0.5...2.5 / 0.5...2.5
10 / 0.6 x 3.5 mm
Ordering data
Version
Dark beige Wemid
Blue Wemid
Note
Qty.
50
50
Order No.
1790990000
1791000000
Qty.
50
50
Order No.
1791030000
1791040000
The rated voltage is reduced to 400 V when using the cross-connection.
The rated voltage is reduced to 400 V when using the cross-connection.
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
Accessories
Pluggable cross-connection
End plate / Partition plate
End bracket
Test adapter
Screwdriver
Reducing sleeves
Cover
Identification systems
Note
C.28
2-pole
3-pole
4-pole
10-pole
20-/24-pole
Dark beige Wemid
Blue Wemid
ZAP/TW ZDK2.5-2
ZAP/TW ZDK2.5-2 BL
Dark beige Wemid
ZEW 35
With assembly peg
ZTA 4
Standard
With “swifty set” cutting device
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
With lightning flash symbol
(see assortment in catalogue 7)
Marking tags
current
24 A
24 A
24 A
24 A
24 A
Width
2 mm
2 mm
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
20
20
1791050000
1791060000
ZAP/TW ZDK2.5-2
ZAP/TW ZDK2.5-2 BL
6 mm
20
9540000000
ZEW 35
5.1 mm
25
1688110000
ZTA 4
1
1274660000
SDIS SL 0.6X3.5X100
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
ZRH 1.5H/1
ZRH 1.5H/2
1764560000
ZAD 1/4-2 GE
SDIS SL 0.6X3.5X100
ZRH 1.5H/1
ZRH 1.5H/2
ZAD 1/4-2 GE
8 mm
DEK 5/5 / WS 10/5
20
current
24 A
24 A
24 A
24 A
24 A
Width
2 mm
2 mm
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
20
20
1791050000
1791060000
6 mm
20
9540000000
5.1 mm
25
1688110000
1
1274660000
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
8 mm
20
1764560000
DEK 5/5 / WS 10/5
ZDK 2.5-2/LD 24VUC order number 1905310000
1282250000 – 2012/2013
Double- / Multi-level terminals
ZDKPE 2.5-2
The compact terminal range for conductor cross-sections
0.13 to 16 mm²
Double-tier terminal with one-sided
PE connection
2.5 mm²
ZDKPE 2.5-2/N/L/PE
2.5 mm²
Double-tier terminal with one-sided
PE connection
Terminals, Z-Series
Roof-style
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 89.5 x 60.5
24 / 4
0.05...4
PE
V
A
mm²
mm²
mm²
mm/-
Note
IEC
800
24
2.5
PE
IEC 60947-7-1 (-7-2)
IEC 60947-7-1 (-7-2)
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
5.1 x 89.5 x 60.5
24 / 4
0.05...4
UL
CSA
600 (C)
300 (D)
20 (C)
10 (D)
AWG 26...12
AWG 30...12
8 kV / 3
A2 / V-0
IEC
800
24
2.5
UL
CSA
600 (C)
20 (C)
AWG 26...12
8 kV / 3
A2 / V-0
r{u#
{u#
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
Type
ZDKPE 2.5-2
Type
ZDKPE 2.5-2/N/L/PE
Rated connection
0.5...4
0.5...2.5 / 0.5...2.5
10 / 0.6 x 3.5 mm
C
Rated connection
0.5...4
0.5...2.5 / 0.5...2.5
10 / 0.6 x 3.5 mm
Ordering data
Version
Dark beige Wemid
Blue Wemid
Note
Qty.
50
Order No.
1805940000
Qty.
50
Order No.
1895700000
The rated voltage is reduced to 400 V when using the cross-connection.
The rated voltage is reduced to 400 V when using the cross-connection.
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
Accessories
Pluggable cross-connection
End plate / Partition plate
End bracket
Test adapter
Screwdriver
Reducing sleeves
Cover
Identification systems
2-pole
3-pole
4-pole
10-pole
20-/24-pole
current
24 A
24 A
24 A
24 A
24 A
Width
2 mm
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
25
1805960000
ZAP/TW ZDKPE2.5-2
6 mm
20
9540000000
ZEW 35
current
24 A
24 A
24 A
24 A
24 A
Width
2 mm
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
25
1805960000
6 mm
20
9540000000
Dark beige Wemid
Blue Wemid
ZAP/TW ZDKPE2.5-2
Dark beige Wemid
ZEW 35
With assembly peg
ZTA 4
5.1 mm
25
1688110000
ZTA 4
5.1 mm
25
1688110000
SDIS SL 0.6X3.5X100
SWIFTY SET
18 mm
1
1
1274660000
9006060000
SDIS SL 0.6X3.5X100
SWIFTY SET
18 mm
1
1
1274660000
9006060000
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
ZRH 1.5H/1
ZRH 1.5H/2
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
1764560000
ZAD 1/4-2 GE
Standard
With “swifty set” cutting device
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
With lightning flash symbol
(see assortment in catalogue 7)
Marking tags
ZRH 1.5H/1
ZRH 1.5H/2
ZAD 1/4-2 GE
DEK 5/5 / WS 10/5
8 mm
20
8 mm
20
1764560000
DEK 5/5 / WS 10/5
Note
1282250000 – 2012/2013
C.29
Double- / Multi-level terminals
ZDK 4 -2
Roof-style
4 mm²
Terminals, Z-Series
Double-level terminal
ZDK 4-2 V
4 mm²
Vertical cross-connected double-level terminal
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
6.1 x 77.6 x 61
32 / 6
0.13...6
6.1 x 77.6 x 61
32 / 6
0.13...6
IEC 60947-7-1
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
V
A
mm²
IEC
800
32
4
UL
CSA
600 (C)
600 (C)
25 (C)
30 (C)
AWG 26...10
AWG 26...10
8 kV / 3
A3 / V-0
IEC
800
32
4
r#a
mm²
mm²
mm/-
UL
CSA
600 (C)
600 (C)
25 (C)
30 (C)
AWG 26...10
AWG 26...10
8 kV / 3
A3 / V-0
r#a
Rated connection
0.5...6
0.5...4 / 0.5...4
10 / 0.6 x 3.5 mm
Rated connection
0.5...6
0.5...4 / 0.5...4
10 / 0.6 x 3.5 mm
Note
Ordering data
Version
Dark beige Wemid
Blue Wemid
Type
ZDK 4-2
ZDK 4-2 BL
Qty.
50
50
Note
Order No.
8670750000
8670850000
Type
ZDK 4-2 V
Qty.
50
Order No.
8671080000
Accessories
Pluggable cross-connection
End plate / Partition plate
End bracket
Test adapter
Screwdriver
Reducing sleeves
Cover
Identification systems
2-pole
3-pole
4-pole
10-pole
20-/24-pole
Type
ZQV 4/2 GE
ZQV 4/3 GE
ZQV 4/4 GE
ZQV 4/10 GE
ZQV 4/20 GE
Dark beige Wemid
Blue Wemid
ZAP/TW ZDK4-2
ZAP/TW ZDK4-2 BL
Dark beige Wemid
ZEW 35
With assembly peg
ZTA 6/ZA
Standard
With “swifty set” cutting device
current
32 A
32 A
32 A
32 A
32 A
Width
2 mm
2 mm
Qty.
60
60
60
20
20
Order No.
1608950000
1608960000
1608970000
1609030000
1909010000
Type
ZQV 4/2 GE
ZQV 4/3 GE
ZQV 4/4 GE
ZQV 4/10 GE
ZQV 4/20 GE
50
50
8670760000
8670620000
ZAP/TW ZDK4-2
ZAP/TW ZDK4-2 BL
6 mm
20
9540000000
ZEW 35
6.1 mm
25
1780660000
ZTA 6/ZA
1
1274660000
SDIS SL 0.6X3.5X100
20
1609110000
ZAD 1/4
SDIS SL 0.6X3.5X100
current
32 A
32 A
32 A
32 A
32 A
Width
2 mm
2 mm
Qty.
60
60
60
20
20
Order No.
1608950000
1608960000
1608970000
1609030000
1909010000
50
50
8670760000
8670620000
6 mm
20
9540000000
6.1 mm
25
1780660000
1
1274660000
20
1609110000
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
With lightning flash symbol
ZAD 1/4
(see assortment in catalogue 7)
Marking tags
DEK 5/6
8 mm
8 mm
DEK 5/6
Note
C.30
1282250000 – 2012/2013
Double- / Multi-level terminals
4 mm²
Phase - PE conductor
ZDK 4-2/N/L
4 mm²
ZDK 4-2/2AN
4 mm²
Double-level terminal
NEW
6.1 x 77.6 x 61
32 / 6
0.13...6
PE
IEC 60947-7-1 (-7-2)
IEC
800
32
4
6.1 x 77.6 x 61
32 / 6
0.13...6
8.1 x 78 x 61
/6
0.13...6
C
IEC 60947-7-1
UL
CSA
600 (C)
600 (C)
25 (C)
30 (C)
AWG 26...10
AWG 26...10
8 kV / 3
A3 / V-0
IEC
800
32
4
r#a
UL
CSA
600 (C)
25 (C)
AWG 26...10
8 kV / 3
A3 / V-0
IEC
800
32
4
Qty.
50
Order No.
8671120000
AWG 26...10
{
Rated connection
0.5...6
0.5...4 / 0.5...4
10 / 0.6 x 3.5 mm
Type
ZDK 4-2/DU-PE
CSA
/3
A3 / V-0
#a
Rated connection
0.5...6
0.5...4 / 0.5...4
10 / 0.6 x 3.5 mm
UL
Terminals, Z-Series
ZDK 4-2 DU/PE
Rated connection
0.5...6
0.5...4 / 0.5...4
10 / 0.6 x 3.5 mm
Type
ZDK 4-2/N/L
Qty.
50
Order No.
1905170000
Type
ZDK 4-2/2AN
Type
Qty.
50
Order No.
1119700000
Upper level printed blue
Type
ZQV 4/2 GE
ZQV 4/3 GE
ZQV 4/4 GE
ZQV 4/10 GE
ZQV 4/20 GE
ZAP/TW ZDK4-2
ZAP/TW ZDK4-2 BL
ZEW 35
ZTA 6/ZA
current
32 A
32 A
32 A
32 A
32 A
Width
2 mm
2 mm
Qty.
60
60
60
20
20
Order No.
1608950000
1608960000
1608970000
1609030000
1909010000
Type
ZQV 4/2 GE
ZQV 4/3 GE
ZQV 4/4 GE
ZQV 4/10 GE
ZQV 4/20 GE
50
50
8670760000
8670620000
ZAP/TW ZDK4-2
ZAP/TW ZDK4-2 BL
6 mm
20
9540000000
ZEW 35
6.1 mm
25
1780660000
ZTA 6/ZA
1
1274660000
SDIS SL 0.6X3.5X100
20
1609110000
ZAD 1/4
SDIS SL 0.6X3.5X100
ZAD 1/4
DEK 5/6
1282250000 – 2012/2013
8 mm
DEK 5/6
current
32 A
32 A
32 A
32 A
32 A
Width
2 mm
2 mm
Qty.
60
60
60
20
20
Order No.
1608950000
1608960000
1608970000
1609030000
1909010000
50
50
8670760000
8670620000
6 mm
20
9540000000
ZEW 35
6.1 mm
25
1780660000
ZTA 6/ZA
1
1274660000
SDIS SL 0.6X3.5X100
20
1609110000
ZAD 1/4
8 mm
current
Qty.
Width
6 mm
20
9540000000
6.1 mm
25
1780660000
1
1274660000
20
1609110000
8 mm
Order No.
DEK 5/6
C.31
Double- / Multi-level terminals
ZDK 2.5/3AN
Compact style
2.5 mm²
Terminals, Z-Series
Double-level terminal
ZDK 2.5/3AN V
2.5 mm²
Vertical cross-connected double-level terminal
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 93 x 51.5
24 / 4
0.05...4
5.1 x 93 x 51.5
24 / 4
0.05...4
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
V
A
mm²
mm²
mm²
mm/-
Note
IEC
800
24
2.5
II 2 G D
UL
CSA
300 (C)
300 (C)
20 (C)
24 (C)
AWG 30...12
AWG 30...12
8 kV / 3
A2 / V-0
IEC 60947-7-1
IEC
800
24
2.5
II 2 G D
UL
CSA
300 (C)
300 (C)
20 (C)
24 (C)
AWG 30...12
AWG 30...12
8 kV / 3
A2 / V-0
r{u#
r{u#
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
Type
ZDK 2.5/3AN
ZDK 2.5/3AN BL
Type
ZDK 2.5/3AN V
ZDK 2.5/3AN V BL
Rated connection
0.5...4 / 0.5...2.5
0.5...2.5 / 0.5...2.5
10 / 0.6 x 3.5 mm
Rated connection
0.5...4 / 0.5...2.5
0.5...2.5 / 0.5...2.5
10 / 0.6 x 3.5 mm
Ordering data
Version
Dark beige Wemid
Blue Wemid
Note
Qty.
50
50
Order No.
1924510000
1924500000
Qty.
50
50
Order No.
1924490000
1924480000
Diode versions ZDK 2.5/3AN D1, 1924440000 and ZDK 2.5/3AN D2,
1924450000.
Accessories
Pluggable cross-connection
End plate / Partition plate
End bracket
Test adapter
Screwdriver
Reducing sleeves
Cover
Identification systems
Note
C.32
2-pole
3-pole
4-pole
10-pole
20-/24-pole
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
Dark beige Wemid
ZAP/TW ZDK 2.5/3AN
Dark beige Wemid
ZEW 35
Standard
With assembly peg
ZTA ZT2.5
ZTA ZT2.5/ZA
Standard
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
With lightning flash symbol
(see assortment in catalogue 7)
Marking tags
current
24 A
24 A
24 A
24 A
24 A
Width
1.5 mm
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
20
1924910000
ZAP/TW ZDK 2.5/3AN
6 mm
20
9540000000
ZEW 35
5.1 mm
5.1 mm
25
25
1827080000
1847600000
ZTA ZT2.5
ZTA ZT2.5/ZA
1
1274660000
SDIS SL 0.6X3.5X100
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
ZRH 1.5H/1
ZRH 1.5H/2
1934160000
ZAD 9/4
SDIS SL 0.6X3.5X100
ZRH 1.5H/1
ZRH 1.5H/2
ZAD 9/4
6 mm
20
current
24 A
24 A
24 A
24 A
24 A
Width
1.5 mm
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
20
1924910000
6 mm
20
9540000000
5.1 mm
5.1 mm
25
25
1827080000
1847600000
1
1274660000
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
6 mm
20
1934160000
SNAPMARK I / DEK 5/5 / WS 10/5
SNAPMARK I / DEK 5/5 / WS 10/5
2.5 mm² wires with wire ferrules including the plastic collar only clampable with
diameter-optimised collar ( Order no. 1333100000, pack of 500).
2.5 mm² wires with wire ferrules including the plastic collar only clampable with
diameter-optimised collar ( Order no. 1333100000, pack of 500).
1282250000 – 2012/2013
Double- / Multi-level terminals
ZDK 2.5/3AN DU-PE
Compact style
2.5 mm²
Terminals, Z-Series
Double-level terminal (DU-PE)
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 93 x 51.5
31 / 4
0.05...4
PE
IEC 60947-7-1 (-7-2)
Rated data
Rated cross-section
Rated voltage to adjoining terminal
Rated impulse withstand voltage to adjacent terminal
Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
mm²
V
kV
IEC
2.5
800
8
II 2 G D
UL
AWG 30...12
CSA
AWG 30...12
C
3
A2 / V-0
r{u#
mm²
mm²
mm/-
Note
Rated connection
0.5...4 / 0.5...2.5
0.5...2.5 / 0.5...2.5
10 / 0.6 x 3.5 mm
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
Ordering data
Version
green/yellow Wemid
Type
ZDK 2.5/3AN DU-PE
Qty.
50
Order No.
1924460000
Note
Accessories
Pluggable cross-connection
End plate / Partition plate
End bracket
Test adapter
Screwdriver
Reducing sleeves
Cover
Identification systems
Note
1282250000 – 2012/2013
2-pole
3-pole
4-pole
10-pole
20-/24-pole
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
Dark beige Wemid
ZAP/TW ZDK 2.5/3AN
Dark beige Wemid
ZEW 35
Standard
With assembly peg
ZTA ZT2.5
ZTA ZT2.5/ZA
Standard
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
With lightning flash symbol
(see assortment in catalogue 7)
Marking tags
current
24 A
24 A
24 A
24 A
24 A
Width
1.5 mm
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
20
1924910000
6 mm
20
9540000000
5.1 mm
5.1 mm
25
25
1827080000
1847600000
1
1274660000
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
SDIS SL 0.6X3.5X100
ZRH 1.5H/1
ZRH 1.5H/2
ZAD 9/4
6 mm
20
1934160000
SNAPMARK I / DEK 5/5 / WS 10/5
2.5 mm² wires with wire ferrules including the plastic collar only clampable with
diameter-optimised collar ( Order no. 1333100000, pack of 500).
C.33
Terminals, Z-Series
Motor-connect terminal blocks
Standard form
ZMAK 2.5
Z-series standard ranges provide solutions for conductor
cross-sections from 0.05 to 35 mm².
Motor-supply terminal
2.5 mm²
ZMAK 2.5 690 V
2.5 mm²
Motor-supply terminal
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 102 x 70
31 / 4
0.13...4
6.1 x 102 x 70
31 / 4
0.13...4
PE
IEC 60947-7-1 (-7-2)
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
V
A
mm²
IEC
400
24
2.5
IEC 60947-7-1 (-7-2)
UL
CSA
300 (D)
300 (D)
10 (D)
25 (D)
AWG 26...12
AWG 26...12
6 kV / 3
A3 / V-0
IEC
690
24
2.5
r#ia
mm²
mm²
mm/-
PE
UL
CSA
300 (D)
10 (D)
AWG 26...12
6 kV / 3
A3 / V-0
#a
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
Note
Ordering data
Version
Dark beige Wemid
Note
Type
ZMAK 2.5
Qty.
25
Order No.
1768000000
Type
ZMAK 2.5 690V
Qty.
25
Order No.
1027550000
The ZMAK 2.5 690 V: with pre-assembled end plate and a width of 6.1 mm!
The ZMAK 2.5 690 V: with pre-assembled end plate and a width of 6.1 mm!
Dark beige Wemid
Type
ZAP ZMAK2.5
Dark beige Wemid
ZEW 35
Accessories
End plate / Partition plate
End bracket
Screwdriver
Reducing sleeves
Test adapter
Identification systems
Standard
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
Standard
(see assortment in catalogue 7)
Marking tags
Width
1.5 mm
Qty.
10
Order No.
1768010000
Type
ZAP ZMAK2.5
6 mm
20
9540000000
ZEW 35
1
1274660000
SDIS SL 0.6X3.5X100
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
ZRH 1.5H/1
ZRH 1.5H/2
SDIS SL 0.6X3.5X100
ZRH 1.5H/1
ZRH 1.5H/2
ZTA 1
DEK 5/5 / WS 12/5
5.1 mm
25
Width
1.5 mm
Qty.
10
Order No.
1768010000
6 mm
20
9540000000
1
1274660000
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
1609040000
DEK 5/5 / WS 12/5
Note
C.34
1282250000 – 2012/2013
Terminals, Z-Series
C
1282250000 – 2012/2013
C.35
Terminals, Z-Series
PE terminals
Standard model
ZPE 1.5
Z-series standard ranges provide solutions for conductor
cross-sections from 0.05 to 35 mm².
Two connections
1.5 mm²
ZPE 1.5/3AN
1.5 mm²
Three connections
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
3.5 x 54.5 x 37
/ 1.5
0.05...1.5
PE
IEC 60947-7-2
Rated data
Rated cross-section
Rated voltage to adjoining terminal
Rated impulse withstand voltage to adjacent terminal
Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
mm²
V
kV
IEC
1.5
500
6
3.5 x 63 x 37
/ 1.5
0.05...1.5
Ex e II
UL
AWG 26...14
CSA
AWG 26...14
T
II 2 G D
EN 60079-7
1.5
PE
IEC 60947-7-2
IEC
1.5
500
6
Ex e II
UL
AWG 26...14
3
B1 / V-0
mm²
mm²
mm/-
Rated connection
0.5...1.5
0.5...1.5 / 0.5...1.5
10 / 0.4 x 2.0 mm
T
II 2 G D
EN 60079-7
1.5
3
B1 / V-0
KEMA 01ATEX2106 U
r#i~a
CSA
AWG 26...14
KEMA 01ATEX2106 U
r#i~a
Rated connection
0.5...1.5
0.5...1.5 / 0.5...1.5
10 / 0.4 x 2.0 mm
Note
Ordering data
Version
green/yellow Wemid
Type
ZPE 1.5
Qty.
100
Note
Order No.
1775510000
Type
ZPE 1.5/3AN
Qty.
100
Order No.
1775560000
Accessories
End plate / Partition plate
End bracket
Test adapter
Screwdriver
Reducing sleeves
Identification systems
Dark beige Wemid
Type
ZAP/TW ZDU1.5/2AN
Width
2 mm
Qty.
20
Order No.
1776030000
Type
ZAP/TW ZDU1.5/3AN
Width
2 mm
Qty.
20
Order No.
1776060000
Dark beige Wemid
ZEW 35
6 mm
20
9540000000
ZEW 35
6 mm
20
9540000000
Standard
With assembly peg
ZTA 5
ZTA 5/ZA
3.5 mm
3.5 mm
25
25
1776210000
1776220000
ZTA 5
ZTA 5/ZA
3.5 mm
3.5 mm
25
25
1776210000
1776220000
1
9037160000
SDS 0.4X2.0X60
1
9037160000
500
500
1781950000
1781960000
ZRH 1.5S/1
ZRH 1.5S/2
500
500
1781950000
1781960000
Standard
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
(see assortment in catalogue 7)
Marking tags
SDS 0.4X2.0X60
ZRH 1.5S/1
ZRH 1.5S/2
DEK 5/3,5 / WS 12/3,5
4.55 mm
4.55 mm
4.55 mm
4.55 mm
DEK 5/3,5 / WS 12/3,5
Note
C.36
1282250000 – 2012/2013
PE terminals
1.5 mm²
Four connections
2.5 mm²
Two connections
3.5 x 75.5 x 37
/ 1.5
0.05...1.5
Ex e II
UL
AWG 26...14
CSA
AWG 26...12
T
II 2 G D
EN 60079-7
1.5
Ex e II
UL
AWG 30...12
3
B1 / V-0
Rated connection
0.5...1.5
0.5...1.5 / 0.5...1.5
10 / 0.4 x 2.0 mm
Type
ZPE 1.5/4AN
CSA
AWG 26...12
T
II 2 G D
EN 60079-7
2.5
IEC
2.5
800
8
Ex e II
UL
AWG 30...12
Qty.
100
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
Order No.
1775620000
Type
ZPE 2.5
CSA
AWG 26...12
T
II 2 G D
EN 60079-7
2.5
Qty.
100
KEMA 97ATEX2521 U
?ru#i~a
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
Order No.
1608640000
Type
ZPE 2.5/3AN
Qty.
100
Order No.
1608650000
Type
ZAP/TW ZDU1.5/4AN
Width
2 mm
Qty.
20
Order No.
1776090000
Type
ZAP/TW 1
Width
2 mm
Qty.
50
Order No.
1608740000
Type
ZAP/TW 2 DB
Width
2 mm
Qty.
50
Order No.
1608770000
ZEW 35
6 mm
20
9540000000
ZEW 35
6 mm
20
9540000000
ZEW 35
6 mm
20
9540000000
3.5 mm
3.5 mm
25
25
1776210000
1776220000
ZTA 1
ZTA 1/ZA
5.1 mm
5.1 mm
25
25
1609040000
1609050000
ZTA 1
ZTA 1/ZA
5.1 mm
5.1 mm
25
25
1609040000
1609050000
1
9037160000
SDIS SL 0.6X3.5X100
1
1274660000
SDIS SL 0.6X3.5X100
1
1274660000
500
500
1781950000
1781960000
ZRH 2.5/1 WS
ZRH 2.5/2 GR/V0
5.55 mm 1000
5.55 mm 1000
1614300000
1614290000
ZRH 2.5/1 WS
ZRH 2.5/2 GR/V0
5.55 mm 1000
5.55 mm 1000
1614300000
1614290000
ZTA 5
ZTA 5/ZA
SDS 0.4X2.0X60
ZRH 1.5S/1
ZRH 1.5S/2
DEK 5/3,5 / WS 12/3,5
1282250000 – 2012/2013
4.55 mm
4.55 mm
DEK 5/5 / WS 10/5
C
3
A3 / V-0
KEMA 97ATEX2521 U
?ru#i~a
PE
IEC 60947-7-2
3
A3 / V-0
KEMA 01ATEX2106 U
r#i~a
2.5 mm²
5.1 x 64.5 x 39.5
/4
0.05...4
PE
IEC 60947-7-2
IEC
2.5
800
8
ZPE 2.5/3AN
Three connections
5.1 x 63 x 39.5
/4
0.05...4
PE
IEC 60947-7-2
IEC
1.5
500
6
ZPE 2.5
Terminals, Z-Series
ZPE 1.5/4AN
DEK 5/5 / WS 10/5
C.37
Terminals, Z-Series
PE terminals
Standard model
ZPE 2.5/4AN
Z-series standard ranges provide solutions for conductor
cross-sections from 0.05 to 35 mm².
Four connections
2.5 mm²
ZPE 4
4 mm²
Two connections
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 79.5 x 39.5
/4
0.05...4
PE
IEC 60947-7-2
Rated data
Rated cross-section
Rated voltage to adjoining terminal
Rated impulse withstand voltage to adjacent terminal
Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
mm²
V
kV
IEC
2.5
800
8
6.1 x 64 x 43.5
/6
0.13...6
Ex e II
UL
AWG 30...12
CSA
AWG 26...12
T
II 2 G D
EN 60079-7
2.5
PE
IEC 60947-7-2
IEC
4
800
8
Ex e II
UL
AWG 26...10
3
A3 / V-0
mm²
mm²
mm/-
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
T
II 2 G D
EN 60079-7
4
3
A4 / V-0
KEMA 97ATEX2521 U
?ru#i~a
CSA
AWG 26...10
KEMA 97ATEX2521 U
?ru#i~a
Rated connection
0.5...6 / 1.5...6
0.5...6 / 0.5...4
12 / 0.6 x 3.5 mm
Note
Ordering data
Version
green/yellow Wemid
Type
ZPE 2.5/4AN
Qty.
100
Note
Order No.
1608660000
Type
ZPE 4
Qty.
100
Order No.
1632080000
Accessories
End plate / Partition plate
End bracket
Test adapter
Screwdriver
Reducing sleeves
Identification systems
Dark beige Wemid
Type
ZAP/TW 3
Width
2 mm
Qty.
50
Order No.
1608800000
Type
ZAP/TW 4
Width
2 mm
Qty.
50
Order No.
1632090000
Dark beige Wemid
ZEW 35
6 mm
20
9540000000
ZEW 35
6 mm
20
9540000000
Standard
With assembly peg
ZTA 1
ZTA 1/ZA
5.1 mm
5.1 mm
25
25
1609040000
1609050000
ZTA 2 ZDU4
ZTA 2/ZA ZDU4
6.1 mm
6.1 mm
25
25
1609060000
1609070000
1
1274660000
SDIS SL 0.6X3.5X100
1
1274660000
5.55 mm 1000
5.55 mm 1000
1614300000
1614290000
ZRH 4/1 WS
ZRH 4/2
7.4 mm 1000
7.4 mm 1000
1636640000
1636650000
Standard
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
(see assortment in catalogue 7)
Marking tags
SDIS SL 0.6X3.5X100
ZRH 2.5/1 WS
ZRH 2.5/2 GR/V0
DEK 5/5 / WS 10/5
DEK 5/6 / WS 12/6
Note
C.38
1282250000 – 2012/2013
PE terminals
ZPE 4/3 AN
4 mm²
4 mm²
Four connections
6.1 x 85.5 x 43.5
/6
0.13...6
6.1 x 104.5 x 43.5
/6
0.13...6
PE
IEC 60947-7-2
IEC
4
800
8
ZPE 4/4 AN
Ex e II
UL
AWG 26...10
CSA
AWG 26...10
T
Terminals, Z-Series
Three connections
II 2 G D
EN 60079-7
4
IEC 60947-7-2
IEC
4
800
8
Ex e II
UL
AWG 26...10
3
A4 / V-0
Rated connection
0.5...6 / 0.5...6
0.5...6 / 0.5...4
12 / 0.6 x 3.5 mm
Type
ZPE 4/3AN
CSA
AWG 26...10
T
II 2 G D
EN 60079-7
4
Qty.
50
KEMA 00ATEX2107 U
r#i~a
Rated connection
0.5...6 / 0.5...6
0.5...6 / 0.5...4
12 / 0.6 x 3.5 mm
Order No.
7904170000
Type
ZPE 4/4AN
Qty.
50
Order No.
7904280000
Type
ZAP/TW 4/3AN
Width
2 mm
Qty.
20
Order No.
7904100000
Type
ZAP/TW4/4AN
Width
2 mm
Qty.
20
Order No.
7904210000
ZEW 35
6 mm
20
9540000000
ZEW 35
6 mm
20
9540000000
6.1 mm
6.1 mm
25
25
1609060000
1609070000
ZTA 2 ZDU4
ZTA 2/ZA ZDU4
6.1 mm
6.1 mm
25
25
1609060000
1609070000
1
1274660000
SDIS SL 0.6X3.5X100
1
1274660000
7.4 mm 1000
7.4 mm 1000
1636640000
1636650000
ZRH 4/1 WS
ZRH 4/2
7.4 mm 1000
7.4 mm 1000
1636640000
1636650000
ZTA 2 ZDU4
ZTA 2/ZA ZDU4
SDIS SL 0.6X3.5X100
ZRH 4/1 WS
ZRH 4/2
DEK 5/6 / WS 12/6
1282250000 – 2012/2013
C
3
A4 / V-0
KEMA 00ATEX2107 U
r#i~a
PE
DEK 5/6 / WS 12/6
C.39
Terminals, Z-Series
PE terminals
Standard model
ZPE 6
Z-series standard ranges provide solutions for conductor
cross-sections from 0.05 to 35 mm².
Two connections
6 mm²
ZPE 6/3 AN
6 mm²
Three connections
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
8.1 x 65 x 45.5
/ 10
0.22...10
PE
IEC 60947-7-2
Rated data
Rated cross-section
Rated voltage to adjoining terminal
Rated impulse withstand voltage to adjacent terminal
Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
mm²
V
kV
IEC
6
800
8
8.1 x 90 x 45.5
/ 10
0.22...10
Ex e II
UL
AWG 22...8
CSA
AWG 20...8
T
II 2 G D
EN 60079-7
6
PE
IEC 60947-7-2
IEC
6
800
8
Ex e II
UL
AWG 22...8
3
A5 / V-0
mm²
mm²
mm/-
Rated connection
0.5...10 / 1.5...10
0.5...10 / 0.5...6
13 / 0.6 x 3.5 mm
T
II 2 G D
EN 60079-7
6
3
A5 / V-0
KEMA 97ATEX2521 U
?ru#i~a
CSA
AWG 20...8
KEMA 00ATEX2107 U
r#i~a
Rated connection
0.5...10 / 1.5...10
0.5...10 / 0.5...6
13 / 0.6 x 3.5 mm
Note
Ordering data
Version
green/yellow Wemid
Type
ZPE 6
Qty.
50
Note
Order No.
1608670000
Type
ZPE 6/3AN
Qty.
50
Order No.
7907400000
Accessories
End plate / Partition plate
End bracket
Test adapter
Screwdriver
Reducing sleeves
Identification systems
Dark beige Wemid
Type
ZAP/TW 5
Width
2 mm
Qty.
50
Order No.
1608830000
Type
ZAP/TW6/3AN
Width
2 mm
Qty.
20
Order No.
7907370000
Dark beige Wemid
ZEW 35
6 mm
20
9540000000
ZEW 35
6 mm
20
9540000000
Standard
With assembly peg
ZTA 3 ZDU6
8.1 mm
25
1654050000
ZTA 3 ZDU6
8.1 mm
25
1654050000
1
1274680000
SDIS SL 1.0X4.5X125
1
1274680000
Standard
SDIS SL 1.0X4.5X125
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
(see assortment in catalogue 7)
Marking tags
DEK 5/8 / WS 12/6
DEK 5/8 / WS 12/6
Note
C.40
1282250000 – 2012/2013
PE terminals
ZPE 10
10 mm²
10 mm²
Three connections
10.1 x 73.5 x 50.5
/ 16
1.31...16
PE
IEC 60947-7-2
IEC
10
800
8
ZPE 10/3 AN
Ex e II
UL
AWG 16...6
CSA
AWG 16...6
T
II 2 G D
EN 60079-7
10
Terminals, Z-Series
Two connections
10.1 x 99 x 50.5
/ 16
1.31...16
IEC 60947-7-2
IEC
10
800
8
Ex e II
UL
AWG 16...6
3
A6 / V-0
Rated connection
1.5...16 / 10...16
1.5...10 / 1.5...10
18 / 1.0 x 5.5 mm
Type
ZPE 10
Type
ZAP/TW ZDU10
ZEW 35
SDIS SL 1.0X4.5X125
DEK 5/5 / WS 12/6
1282250000 – 2012/2013
CSA
AWG 16...6
T
II 2 G D
EN 60079-7
10
C
3
A6 / V-0
KEMA 99ATEX5514 U
r{#i~
PE
Qty.
25
KEMA 00ATEX2107 U
r#ia
Rated connection
1.5...16 / 10...16
1.5...10 / 1.5...10
18 / 1.0 x 5.5 mm
Order No.
1746770000
Type
ZPE 10/3AN
Qty.
20
Order No.
1767670000
Width
2.7 mm
Qty.
20
Order No.
1748660000
Type
ZAP/TW 10/16
Width
3 mm
Qty.
20
Order No.
1749580000
6 mm
20
9540000000
ZEW 35
6 mm
20
9540000000
1
1274680000
SDIS SL 1.0X4.5X125
1
1274680000
DEK 5/5 / WS 12/6
C.41
Terminals, Z-Series
PE terminals
Standard model
ZPE 16
Z-series standard ranges provide solutions for conductor
cross-sections from 0.05 to 35 mm².
Two connections
16 mm²
ZPE 16/3AN
16 mm²
Three connections
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
12.1 x 82.5 x 51.5
/ 25
1.5...25
PE
IEC 60947-7-2
Rated data
Rated cross-section
Rated voltage to adjoining terminal
Rated impulse withstand voltage to adjacent terminal
Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
mm²
V
kV
IEC
16
800
8
Ex e II
UL
AWG 14...4
CSA
AWG 14...4
T
II 2 G D
EN 60079-7
16
12.1 x 99 x 51.5
/ 25
1.5...25
IEC 60947-7-2
IEC
16
800
8
Ex e II
UL
AWG 14...4
3
A7 / V-0
mm²
mm²
mm/-
Note
Rated connection
1.5...16 / 16...25
1.5...16 / 1.5...16
18 / 1.0 x 5.5 mm
CSA
AWG 14...4
T
II 2 G D
EN 60079-7
16
3
A7 / V-0
KEMA 99ATEX5514 U
r{#i~
PE
KEMA 00ATEX2107 U
r#ia
Rated connection
1.5...16 / 16...25
1.5...16 / 1.5...16
18 / 1.0 x 5.5 mm
To ensure the current-carrying capacity of the mounting rail, it is necessary to
use the TS 35 x 15.
To ensure the current-carrying capacity of the mounting rail, it is necessary to
use the TS 35 x 15.
Type
ZPE 16
Order No.
1745250000
Type
ZPE 16/3AN
Ordering data
Version
green/yellow Wemid
Qty.
25
Note
Qty.
20
Order No.
1768310000
Accessories
End plate / Partition plate
End bracket
Test adapter
Screwdriver
Reducing sleeves
Identification systems
Note
C.42
Dark beige Wemid
Type
ZAP/TW ZDU16
Width
3 mm
Qty.
20
Order No.
1745150000
Type
ZAP/TW 10/16
Width
3 mm
Qty.
20
Order No.
1749580000
Dark beige Wemid
ZEW 35
6 mm
20
9540000000
ZEW 35
6 mm
20
9540000000
1
1274680000
SDIS SL 1.0X4.5X125
1
1274680000
Standard
With assembly peg
Standard
SDIS SL 1.0X4.5X125
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
(see assortment in catalogue 7)
Marking tags
DEK 5/5 / WS 15/5
DEK 5/5 / WS 15/5
The plug-in cross-connections ZQV 16/2 (1739690000) can be used.
1282250000 – 2012/2013
PE terminals
ZPE 35
35 mm²
Terminals, Z-Series
Two connections
16 x 100.5 x 59.5
/ 35
2.5...35
PE
IEC 60947-7-2
IEC
35
800
8
Ex e II
UL
AWG 12...2
CSA
AWG 12...2
T
II 2 G D
EN 60079-7
35
C
3
A8 / V-0
KEMA 00ATEX2107 U
r#~a
Rated connection
2.5...16 / 2.5...35
2.5...35 / 2.5...35
25 / 1.0 x 5.5 mm
To ensure the current-carrying capacity of the mounting rail, it is necessary to
use the TS 35 x 15.
Type
ZPE 35
Qty.
10
Order No.
1739650000
Integrated end plate.
Type
Width
Qty.
ZEW 35
6 mm
20
9540000000
1
1274680000
SDIS SL 1.0X4.5X125
Order No.
DEK 5/5 / WS 15/5
The plug-in cross-connections ZQV 35/2 (1739700000) can be used.
1282250000 – 2012/2013
C.43
Terminals, Z-Series
PE terminals
Roof-style
ZPE 2.5-2
The compact terminal range for conductor cross-sections
0.13 to 16 mm²
Two connections
2.5 mm²
ZPE 2.5-2/3AN
2.5 mm²
Three connections
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 50.5 x 44
/4
0.13...4
PE
IEC 60947-7-2
Rated data
Rated cross-section
Rated voltage to adjoining terminal
Rated impulse withstand voltage to adjacent terminal
Rated short-time current
Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
mm²
V
kV
IEC
2.5
800
8
5.1 x 50.5 x 44
/4
0.13...4
Ex e II
UL
AWG 26...12
CSA
AWG 26...12
T
II 2 G D
EN 60079-7
2.5
PE
IEC 60947-7-2
IEC
2.5
800
8
Ex e II
UL
AWG 26...12
300 A (2.5 mm²)
3
A2 / V-0
mm²
mm²
mm/-
Note
Rated connection
0.5...4
0.5...2.5 / 0.5...2.5
10 / 0.6 x 3.5 mm
T
II 2 G D
EN 60079-7
2.5
300 A (2.5 mm²)
3
A2 / V-0
KEMA 97ATEX4677 U
ru#a
CSA
AWG 26...14
KEMA 97ATEX4677 U
?ru#ia
Rated connection
0.5...4
0.5...2.5 / 0.5...2.5
10 / 0.6 x 3.5 mm
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
green/yellow Wemid
Type
ZPE 2.5-2
Order No.
1772090000
Type
ZPE 2.5-2/3AN
Dark beige Wemid
Type
ZAP/TW7
Dark beige Wemid
ZEW 35
With assembly peg
ZTA 4
Ordering data
Version
Qty.
100
Note
Qty.
100
Order No.
1706090000
Accessories
End plate / Partition plate
End bracket
Test adapter
Screwdriver
Reducing sleeves
Identification systems
Standard
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
(see assortment in catalogue 7)
Marking tags
SDIS SL 0.6X3.5X100
ZRH 1.5H/1
ZRH 1.5H/2
DEK 5/5 / WS 14/5
Width
2.5 mm
Qty.
50
Order No.
1706110000
Type
ZAP/TW7
6 mm
20
9540000000
ZEW 35
5.1 mm
25
1688110000
ZTA 4
1
1274660000
SDIS SL 0.6X3.5X100
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
ZRH 1.5H/1
ZRH 1.5H/2
Width
2.5 mm
Qty.
50
Order No.
1706110000
6 mm
20
9540000000
5.1 mm
25
1688110000
1
1274660000
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
DEK 5/5 / WS 14/5
Note
C.44
1282250000 – 2012/2013
PE terminals
2.5 mm²
Four connections
4 mm²
Two connections
5.1 x 50.5 x 44
/4
0.13...4
Ex e II
UL
AWG 26...12
CSA
AWG 26...14
T
II 2 G D
EN 60079-7
2.5
Ex e II
UL
AWG 26...10
300 A (2.5 mm²)
3
A2 / V-0
Rated connection
0.5...4
0.5...2.5 / 0.5...2.5
10 / 0.6 x 3.5 mm
CSA
AWG 26...10
T
II 2 G D
EN 60079-7
4
PE
IEC 60947-7-2
IEC
4
800
8
Ex e II
UL
AWG 26...10
480 A (4 mm²)
3
A3 / V-0
KEMA 97ATEX4677 U
?ru#ia
4 mm²
6.1 x 61.5 x 46
/6
0.13...6
PE
IEC 60947-7-2
IEC
4
800
8
ZPE 4-2/3AN
Three connections
6.1 x 61.5 x 46
/6
0.13...6
PE
IEC 60947-7-2
IEC
2.5
800
8
ZPE 4-2/2AN
Terminals, Z-Series
ZPE 2.5-2/4AN
Rated connection
0.5...6
0.5...4 / 0.5...4
10 / 0.6 x 3.5 mm
T
II 2 G D
EN 60079-7
4
C
480 A (4 mm²)
3
A3 / V-0
KEMA 97ATEX4677 U
ru#ia
CSA
AWG 26...10
KEMA 97ATEX4677 U
ru#ia
Rated connection
0.5...6
0.5...4 / 0.5...4
10 / 0.6 x 3.5 mm
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
Type
ZPE 2.5-2/4AN
Type
ZAP/TW7
ZEW 35
ZTA 4
SDIS SL 0.6X3.5X100
ZRH 1.5H/1
ZRH 1.5H/2
DEK 5/5 / WS 10/5
1282250000 – 2012/2013
Qty.
100
Order No.
1706100000
Type
ZPE 4-2/2AN
Qty.
100
Order No.
1770380000
Type
ZPE 4-2/3AN
Qty.
100
Order No.
1770390000
Width
2.5 mm
Qty.
50
Order No.
1706110000
Type
ZAP ZDU4-2
Width
2 mm
Qty.
50
Order No.
1770400000
Type
ZAP ZDU4-2
Width
2 mm
Qty.
50
Order No.
1770400000
6 mm
20
9540000000
ZEW 35
6 mm
20
9540000000
ZEW 35
6 mm
20
9540000000
5.1 mm
25
1688110000
ZTA 6/ZA
6.1 mm
25
1780660000
ZTA 6/ZA
6.1 mm
25
1780660000
1
1274660000
SDIS SL 0.6X3.5X100
1
1274660000
SDIS SL 0.6X3.5X100
1
1274660000
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
ZRH 4/1 WS
ZRH 4/2
7.4 mm 1000
7.4 mm 1000
1636640000
1636650000
ZRH 4/1 WS
ZRH 4/2
7.4 mm 1000
7.4 mm 1000
1636640000
1636650000
DEK 5/6 / WS 12/6
DEK 5/6 / WS 12/6
C.45
Terminals, Z-Series
PE terminals
Roof-style
ZPE 4-2/4 AN
The compact terminal range for conductor cross-sections
0.13 to 16 mm²
Four connections
4 mm²
ZPE 6-2/2AN
Two connections
6.1 x 75 x 46
/6
0.13...6
8.1 x 68 x 50
/ 10
0.22...10
6 mm²
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
PE
IEC 60947-7-2
Rated data
Rated cross-section
Rated voltage to adjoining terminal
Rated impulse withstand voltage to adjacent terminal
Rated short-time current
Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
mm²
V
kV
IEC
4
800
8
Ex e II
UL
AWG 26...10
CSA
AWG 26...10
T
II 2 G D
EN 60079-7
4
PE
IEC 60947-7-2
IEC
6
800
8
Ex e II
UL
AWG 22...8
480 A (4 mm²)
3
A3 / V-0
mm²
mm²
mm/-
Rated connection
0.5...6
0.5...4 / 0.5...4
10 / 0.6 x 3.5 mm
T
II 2 G D
EN 60079-7
6
720 A (6 mm²)
3
A5 / V-0
KEMA 97ATEX4677 U
r{u#ia
CSA
AWG 20...8
KEMA 97ATEX4677 U
ru#ia
Rated connection
0.5...10
0.5...10 / 0.5...6
12 / 0.6 x 3.5 mm
Note
Ordering data
Version
green/yellow Wemid
Type
ZPE 4-2/4AN
Qty.
100
Note
Order No.
1807090000
Type
ZPE 6-2/2AN
Qty.
50
Order No.
1771370000
Accessories
End plate / Partition plate
End bracket
Test adapter
Screwdriver
Reducing sleeves
Identification systems
Dark beige Wemid
Type
ZAP ZDU4-2/4AN
Width
2 mm
Qty.
50
Order No.
1807010000
Type
ZAP ZDU6-2
Width
2 mm
Qty.
50
Order No.
1771440000
Dark beige Wemid
ZEW 35
6 mm
20
9540000000
ZEW 35
6 mm
20
9540000000
With assembly peg
ZTA 6/ZA
6.1 mm
25
1780660000
ZTA 7/ZA
8.1 mm
25
1780670000
1
1274660000
SDIS SL 0.6X3.5X100
1
1274660000
7.4 mm 1000
7.4 mm 1000
1636640000
1636650000
Standard
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
(see assortment in catalogue 7)
Marking tags
SDIS SL 0.6X3.5X100
ZRH 4/1 WS
ZRH 4/2
DEK 5/6 / WS 12/6
DEK 5/8
Note
C.46
1282250000 – 2012/2013
PE terminals
6 mm²
ZPE 16-2/1AN
Three connections
Supply terminal - PE
8.1 x 68 x 50
/ 10
0.22...10
12 x 65 x 51.5
/ 25
1.5...25
PE
IEC 60947-7-2
IEC
6
800
8
Ex e II
UL
AWG 22...8
CSA
AWG 20...8
T
II 2 G D
EN 60079-7
6
PE
IEC
16
800
8
UL
AWG 14...4
CSA
AWG 26...14
1920 A (16 mm²)
3
A7 / V-0
KEMA 97ATEX4677 U
Rated connection
0.5...10
0.5...10 / 0.5...6
12 / 0.6 x 3.5 mm
C
IEC 60947-7-2
720 A (6 mm²)
3
A5 / V-0
ru#ia
16 mm²
Terminals, Z-Series
ZPE 6-2/3AN
rua
Rated connection
1.5...10 / 16...25
1.5...16 / 1.5...16
18 / 1.0 x 5.5 mm
Rated voltage is reduced to 400 V or the IP rated voltage of the distribution
terminals.
Type
ZPE 6-2/3AN
Qty.
50
Order No.
1771360000
Type
ZPE 16-2/1AN
Type
ZAP ZDU6-2
Width
2 mm
Qty.
50
Order No.
1771440000
Type
ZAP/Z...16-2/1AN
ZEW 35
6 mm
20
9540000000
ZEW 35
8.1 mm
25
1780670000
1
1274670000
ZTA 7/ZA
SDIS SL 0.8X4.0X100
DEK 5/8
SDIS SL 1.0X4.5X125
Qty.
20
Order No.
1772960000
Width
2.5 mm
Qty.
10
Order No.
1772970000
6 mm
20
9540000000
1
1274680000
DEK 5/8
The plug-in cross-connections ZQV 2.5/.. , ZQV 4/... and ZQV 6/... can be used.
1282250000 – 2012/2013
C.47
PE terminals
ZPE 2.5N
Compact style
2.5 mm²
Terminals, Z-Series
2 connections
ZPE 2.5N/3AN
2.5 mm²
3 connections
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 50.5 x 39
/4
0.05...4
PE
IEC 60947-7-2
Rated data
Rated cross-section
Rated voltage to adjoining terminal
Rated impulse withstand voltage to adjacent terminal
Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
mm²
V
kV
IEC
2.5
800
6
5.1 x 56.5 x 39
/4
0.05...4
II 2 G D
UL
AWG 30...12
CSA
AWG 30...12
PE
IEC 60947-7-2
IEC
2.5
800
6
II 2 G D
UL
AWG 30...12
3
A2 / V-0
mm²
mm²
mm/-
Note
CSA
AWG 30...12
3
A2 / V-0
r{u
r{u
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
Type
ZPE 2.5N
Order No.
1933760000
Type
ZPE 2.5N/3AN
Rated connection
0.5...4 / 1.5...2.5
0.5...2.5 / 0.5...1.5
10 / 0.6 x 3.5 mm
Rated connection
0.5...4 / 1.5...2.5
0.5...2.5 / 0.5...1.5
10 / 0.6 x 3.5 mm
Ordering data
Version
green/yellow Wemid
Qty.
50
Note
Qty.
50
Order No.
1933770000
Accessories
End plate / Partition plate
End bracket
Test adapter
Screwdriver
Reducing sleeves
Identification systems
Note
C.48
Dark beige Wemid
Type
ZAP/TW ZDU/ZPE 2.5N
Width
2 mm
Qty.
20
Order No.
1933790000
Type
ZAP/TW ZDU/ZPE 2.5N/3AN
Width
2 mm
Qty.
50
Order No.
1933800000
Dark beige Wemid
ZEW 35
6 mm
20
9540000000
ZEW 35
6 mm
20
9540000000
Standard
With assembly peg
ZTA ZT2.5
ZTA ZT2.5/ZA
5.1 mm
5.1 mm
25
25
1827080000
1847600000
ZTA ZT2.5
ZTA ZT2.5/ZA
5.1 mm
5.1 mm
25
25
1827080000
1847600000
1
1274660000
SDIS SL 0.6X3.5X100
1
1274660000
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
ZRH 1.5H/1
ZRH 1.5H/2
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
Standard
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
(see assortment in catalogue 7)
Marking tags
SDIS SL 0.6X3.5X100
ZRH 1.5H/1
ZRH 1.5H/2
DEK 5/5 / WS 10/5
DEK 5/5 / WS 10/5
2.5 mm² wires with wire ferrules including the plastic collar only clampable with
diameter-optimised collar (Order no. 1333100000, pack of 500).
2.5 mm² wires with wire ferrules including the plastic collar only clampable with
diameter-optimised collar (Order no. 1333100000, pack of 500).
1282250000 – 2012/2013
PE terminals
ZPE 2.5N/4AN
2.5 mm²
Terminals, Z-Series
4 connections
5.1 x 60 x 39
/4
0.05...4
PE
IEC 60947-7-2
IEC
2.5
800
6
II 2 G D
UL
AWG 30...12
CSA
AWG 30...12
C
3
A2 / V-0
r{u
Rated connection
0.5...4 / 1.5...2.5
0.5...2.5 / 0.5...1.5
10 / 0.6 x 3.5 mm
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
Type
ZPE 2.5N/4AN
Qty.
50
Order No.
1933780000
Type
ZAP/TW ZDU/ZPE 2.5N/4AN
Width
2 mm
Qty.
50
Order No.
1933810000
ZEW 35
6 mm
20
9540000000
5.1 mm
5.1 mm
25
25
1827080000
1847600000
1
1274660000
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
ZTA ZT2.5
ZTA ZT2.5/ZA
SDIS SL 0.6X3.5X100
ZRH 1.5H/1
ZRH 1.5H/2
DEK 5/5 / WS 10/5
2.5 mm² wires with wire ferrules including the plastic collar only clampable with
diameter-optimised collar (Order no. 1333100000, pack of 500).
1282250000 – 2012/2013
C.49
Terminals, Z-Series
PE terminals
Standard form
ZDK 1.5 PE
Z-series standard ranges provide solutions for conductor
cross-sections from 0.05 to 35 mm².
Double-level terminal
1.5 mm²
ZDK 2.5 PE
2.5 mm²
Vertically cross-connected
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
3.5 x 75.5 x 50
/ 1.5
0.05...1.5
PE
IEC 60947-7-2
Rated data
Rated cross-section
Rated voltage to adjoining terminal
Rated impulse withstand voltage to adjacent terminal
Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
mm²
V
kV
IEC
1.5
500
6
5.1 x 79.5 x 54
/ 2.5
0.05...2.5
Ex e II
UL
AWG 28...16
CSA
AWG 28...16
T
II 2 G D
EN 60079-7
1.5
PE
IEC 60947-7-2
IEC
2.5
500
6
Ex e II
UL
AWG 26...14
3
B1 / V-0
mm²
mm²
mm/-
Rated connection
0.5...1.5
0.5...1.5 / 0.5...1.5
10 / 0.4 x 2.0 mm
T
II 2 G D
EN 60079-7
2.5
3
A2 / V-0
KEMA 01ATEX2106 U
r{#
CSA
AWG 26...12
Note
KEMA 97ATEX4677 U
r#ia
Rated connection
0.5...2.5
0.5...2.5 / 0.5...2.5
10 / 0.6 x 3.5 mm
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
Ordering data
Version
green/yellow Wemid
Type
ZDK 1.5PE
Qty.
100
Note
Order No.
1791150000
Type
ZDK 2.5PE
Qty.
50
Order No.
1690000000
Accessories
End bracket
Test adapter
Reducing sleeves
End plate / Partition plate
Screwdriver
Reducing sleeves
Identification systems
Dark beige Wemid
Type
ZEW 35
Standard
With assembly peg
ZTA 5
ZTA 5/ZA
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
ZRH 1.5S/1
ZRH 1.5S/2
Dark beige Wemid
ZAP/TW ZDK1.5
Standard
SDS 0.4X2.0X60
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
(see assortment in catalogue 7)
Marking tags
ZRH 1.5S/1
ZRH 1.5S/2
DEK 5/3,5
Width
6 mm
Qty.
20
Order No.
9540000000
Type
ZEW 35
3.5 mm
3.5 mm
25
25
1776210000
1776220000
ZTA 4
4.55 mm
4.55 mm
500
500
1781950000
1781960000
ZRH 1.5H/1
ZRH 1.5H/2
2 mm
20
1791160000
ZAP/TW ZDK2.5
1
9037160000
SDIS SL 0.6X3.5X100
500
500
1781950000
1781960000
ZRH 1.5H/1
ZRH 1.5H/2
4.55 mm
4.55 mm
Width
6 mm
Qty.
20
Order No.
9540000000
5.1 mm
25
1688110000
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
20
1674730000
1
1274660000
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
1.5 mm
DEK 5/5 / WS 12/5
Note
C.50
1282250000 – 2012/2013
PE terminals
ZDK 2.5-2 PE
The compact terminal range for conductor cross-sections
0.13 to 16 mm².
Four connections
2.5 mm²
ZDK 4-2 PE
4 mm²
Four connections
Terminals, Z-Series
Roof-style
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 72.5 x 55.5
/4
0.05...4
PE
IEC 60947-7-2
Rated data
Rated cross-section
Rated voltage to adjoining terminal
Rated impulse withstand voltage to adjacent terminal
Rated short-time current
Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
mm²
V
kV
IEC
2.5
800
8
6.1 x 77.6 x 61
/6
0.13...6
II 2 G D
UL
AWG 26...12
CSA
AWG 30...12
PE
IEC 60947-7-2
IEC
4
800
8
UL
AWG 26...10
300 A (2.5 mm²)
3
A2 / V-0
Note
C
480 A (4 mm²)
3
A3 / V-0
r{#
mm²
mm²
mm/-
CSA
AWG 26...10
r#a
Rated connection
0.5...4
0.5...2.5 / 0.5...1.5
10 / 0.6 x 3.5 mm
Rated connection
0.5...6
0.5...4 / 0.5...4
10 / 0.6 x 3.5 mm
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
Ordering data
Version
green/yellow Wemid
Type
ZDK 2.5-2PE
Qty.
50
Note
Order No.
1791010000
Type
ZDK 4-2 PE
Qty.
50
Order No.
8671050000
Accessories
End plate / Partition plate
End bracket
Test adapter
Screwdriver
Reducing sleeves
Identification systems
Dark beige Wemid
Type
ZAP/TW ZDK2.5-2
Width
2 mm
Qty.
20
Order No.
1791050000
Type
ZAP/TW ZDK4-2
Width
2 mm
Qty.
50
Order No.
8670760000
Dark beige Wemid
ZEW 35
6 mm
20
9540000000
ZEW 35
6 mm
20
9540000000
With assembly peg
ZTA 4
5.1 mm
25
1688110000
ZTA 6/ZA
6.1 mm
25
1780660000
1
9008320000
SDIS SL 0.6X3.5X100
1
1274660000
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
Standard
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
(see assortment in catalogue 7)
Marking tags
SDS 0.5X3.0X80
ZRH 1.5H/1
ZRH 1.5H/2
DEK 5/5 / WS 10/5
DEK 5/6
Note
1282250000 – 2012/2013
C.51
PE terminals
ZDK 2.5/3AN PE
Compact style
2.5 mm²
Terminals, Z-Series
Double-level terminal
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 93 x 51.5
/4
0.05...4
PE
IEC 60947-7-2
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
V
A
mm²
IEC
800
2.5
II 2 G D
UL
CSA
300 (C)
24 (C)
AWG 30...12
AWG 30...12
8 kV / 3
A2 / V-0
r{u#
mm²
mm²
mm/-
Note
Rated connection
0.5...4 / 0.5...2.5
0.5...2.5 / 0.5...2.5
10 / 0.6 x 3.5 mm
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
Ordering data
Version
green/yellow Wemid
Type
ZDK 2.5/3AN PE
Qty.
50
Order No.
1924470000
Note
Accessories
End plate / Partition plate
End bracket
Test adapter
Screwdriver
Reducing sleeves
Identification systems
Note
C.52
Dark beige Wemid
Type
ZAP/TW ZDK 2.5/3AN
Dark beige Wemid
ZEW 35/2
Standard
With assembly peg
ZTA ZT2.5
ZTA ZT2.5/ZA
Standard
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
(see assortment in catalogue 7)
Marking tags
Width
1.5 mm
Qty.
20
Order No.
1924910000
8 mm
20
8630740000
5.1 mm
5.1 mm
25
25
1827080000
1847600000
1
1274660000
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
SDIS SL 0.6X3.5X100
ZRH 1.5H/1
ZRH 1.5H/2
SNAPMARK I / DEK 5/5 / WS 10/5
2.5 mm² wires with wire ferrules including the plastic collar only clampable with
diameter-optimised collar (Order no. 1333100000, pack of 500).
1282250000 – 2012/2013
Terminals, Z-Series
C
1282250000 – 2012/2013
C.53
Fuse terminals
Terminals, Z-Series
ZSI 2.5
Z-series standard ranges provide solutions for conductor
cross-sections from 0.05 to 35 mm².
2.5 mm²
ZSI 2.5
Overload and short-circuit protection
For metric fuses 5 x 20 mm
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
7.9 x 79.5 x 74
6.3 / 4
0.13...4
IEC 60947-7-3
Rated data
Rated voltage to adjoining terminal
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
V
A
mm²
IEC
500
6.3
2.5
Type
ZSI 2.5
UL
CSA
300 (C)
600 (C)
10 (C)
15 (C)
AWG 26...12
AWG 26...12
6 kV / 3
A3 / V-0
?ru#i~a
mm²
mm²
mm/-
Note
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
Arrangement
Max. power loss (1.6 W) at the cartridge fuse limits the rated current.
Individual
In combination
Order No.
1616400000
Applications
Only short-circuit
Overload and shortprotection
circuit protection
TA max. Nominal values TA max. Nominal values
52 °C 4.0 W / 6.3 A 27 °C 2.5 W / 2.5 A
55 °C 2.5 W / 6.3 A 41 °C 1.6 W / 6.3 A
Ordering data
Version
500 V AC/DC, w/o LED
10-36 V AC/DC, with LED
30-70 V AC/DC, with LED
60-150 V AC/DC, with LED
140-250 V AC/DC, with LED
Note
Type
ZSI 2.5
Qty.
50
Order No.
1616400000
For the fuse insert carrier, the rated voltage is 250 V and the rated impulse
voltage is 4 kV.
Accessories
Pluggable cross-connection
2-pole
3-pole
4-pole
End plate / Partition plate
Dark beige Wemid
Dark beige Wemid
Screwdriver
G-fuse cartridge, 5 x 20mm (IEC 60127-2)
Standard
0.25 A fast
0.50 A fast
1.00 A fast
2.00 A fast
G25 with indicator / imperial (inch) fuse
0.50 A medium slow / 2 A
1.00 A medium slow / 3 A
2.00 A fast / 5 A
4.00 A fast / 10 A
Identification systems
Note
C.54
(see assortment in catalogue 7)
Marking tags
Type
ZQV 6/2 GE
ZQV 6/3 GE
ZQV 6/4 GE
ZAP/TW 3
ZAP TNHE/ZSI2.5
current
41 A
41 A
41 A
Width
2 mm
1.1 mm
SDIS SL 0.6X3.5X100
G 20/0.25A/F
G 20/0.50A/F
G 20/1.00A/F
G 20/2.00A/F
Qty.
60
60
60
Order No.
1627850000
1627860000
1627870000
50
25
1608800000
1610840000
1
1274660000
10
10
10
10
0430500000
0430600000
0430700000
0430900000
DEK 5/5 / WS 10/5
Status display using a bi-directional LED.
1282250000 – 2012/2013
Fuse terminals
ZSI 2.5 LED
2.5 mm²
For metric fuses 5 x 20 mm
ZSI 2.5/5x25
2.5 mm²
For metric fuses 5 x 25 mm
Terminals, Z-Series
Z-series standard ranges provide solutions for conductor
cross-sections from 0.05 to 35 mm².
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
7.9 x 79.5 x 74
6.3 / 4
0.13...4
7.9 x 79.5 x 74
6.3 / 4
0.13...4
IEC
V
A
mm²
6.3
2.5
UL
CSA
IEC
500
6.3
2.5
AWG 26...12
AWG 26...12
6 kV / 3
A3 / V-0
Note
UL
CSA
6 kV / 3
A3 / V-0
?ru#i~a
mm²
mm²
mm/-
C
IEC 60947-7-3
IEC 60947-7-3
Rated data
Rated voltage to adjoining terminal
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
u#
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
Max. power loss (1.6 W) at the cartridge fuse limits the rated current.
Max. power loss (1.6 W) at the cartridge fuse limits the rated current.
Type
Type
ZSI 2.5/5X25
Ordering data
Version
500 V AC/DC, w/o LED
10-36 V AC/DC, with LED
30-70 V AC/DC, with LED
60-150 V AC/DC, with LED
140-250 V AC/DC, with LED
Note
Qty.
ZSI 2.5/LD 28AC
ZSI 2.5/LD 60AC
ZSI 2.5/LD 120AC
ZSI 2.5/LD 250AC
Order No.
1616440000
1616430000
1616420000
1616410000
50
50
50
50
Qty.
50
Order No.
1730900000
For the fuse insert carrier, the rated voltage is 250 V and the rated impulse
voltage is 4 kV.
For the fuse insert carrier, the rated voltage is 250 V and the rated impulse
voltage is 4 kV.
Type
ZQV 6/2 GE
ZQV 6/3 GE
ZQV 6/4 GE
Accessories
Pluggable cross-connection
2-pole
3-pole
4-pole
End plate / Partition plate
Dark beige Wemid
Dark beige Wemid
Screwdriver
G-fuse cartridge, 5 x 20mm (IEC 60127-2)
Standard
0.25 A fast
0.50 A fast
1.00 A fast
2.00 A fast
G25 with indicator / imperial (inch) fuse
0.50 A medium slow / 2 A
1.00 A medium slow / 3 A
2.00 A fast / 5 A
4.00 A fast / 10 A
Identification systems
Note
1282250000 – 2012/2013
(see assortment in catalogue 7)
Marking tags
ZAP/TW 3
ZAP TNHE/ZSI2.5
current
41 A
41 A
41 A
Width
2 mm
1.1 mm
SDIS SL 0.6X3.5X100
G 20/0.25A/F
G 20/0.50A/F
G 20/1.00A/F
G 20/2.00A/F
Qty.
60
60
60
Order No.
1627850000
1627860000
1627870000
Type
ZQV 6/2 GE
ZQV 6/3 GE
ZQV 6/4 GE
50
25
1608800000
1610840000
ZAP/TW 3
ZAP TNHE/ZSI2.5
1
1274660000
SDIS SL 0.6X3.5X100
10
10
10
10
0430500000
0430600000
0430700000
0430900000
G 25/0.50A/M WS
G 25/1.00A/M RT
G 25/2.00A/F BL
G 25/4.00A/F BR
DEK 5/5 / WS 10/5
current
41 A
41 A
41 A
Width
2 mm
1.1 mm
Qty.
60
60
60
Order No.
1627850000
1627860000
1627870000
50
25
1608800000
1610840000
1
1274660000
10
10
10
10
0510300000
0265800000
0192700000
0192800000
DEK 5/5 / WS 10/5
Status display using a bi-directional LED.
C.55
Fuse terminals
Terminals, Z-Series
ZSI 2.5/2
Z-series standard ranges provide solutions for conductor
cross-sections from 0.05 to 35 mm².
2.5 mm²
ZSI 2.5/2
Overload and short-circuit protection
For imperial fuses
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
12.2 x 79.5 x 74
12 / 4
0.13...4
IEC 60947-7-3
Rated data
Rated voltage to adjoining terminal
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
V
A
mm²
IEC
500
12
2.5
Type
ZSI 2.5/2 500AC
UL
CSA
600 (C)
600 (C)
16 (C)
15 (C)
AWG 26...12
AWG 26...12
6 kV / 3
A3 / V-0
?ru#i~a
mm²
mm²
mm/-
Note
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
Arrangement
Max. power loss (1.6 W) at the cartridge fuse limits the rated current.
Individual
In combination
Order No.
1616460000
Applications
Only short-circuit
Overload and shortprotection
circuit protection
TA max. Nominal values TA max. Nominal values
46 °C 4.0 W / 10.0 A 40 °C 2.5 W / 2.5 A
72 °C 2.5 W / 2.5 A 29 °C 2.5 W / 2.5 A
Ordering data
Version
500 V AC/DC, w/o LED
10-36 V AC/DC, with LED
30-70 V AC/DC, with LED
60-150 V AC/DC, with LED
140-250 V AC/DC, with LED
Note
Type
ZSI 2.5/2 500AC
Qty.
10
Order No.
1616460000
For the fuse insert carrier, the rated voltage is 250 V and the rated impulse
voltage is 4 kV.
Accessories
Pluggable cross-connection
2-pole
3-pole
4-pole
End plate / Partition plate
Dark beige Wemid
Dark beige Wemid
Screwdriver
G-fuse cartridge, 5 x 20mm (IEC 60127-2)
Standard
Note
C.56
current
10 A
10 A
10 A
Width
Qty.
20
20
20
Order No.
1633200000
1633210000
1633220000
ZAP TNHE/ZSI2.5
1.1 mm
25
1610840000
1
1274660000
10
0293900000
SDIS SL 0.6X3.5X100
0.25 A fast
0.50 A fast
1.00 A fast
2.00 A fast
G25 with indicator / imperial (inch) fuse
0.50 A medium slow / 2 A
1.00 A medium slow / 3 A
2.00 A fast / 5 A
4.00 A fast / 10 A
Identification systems
Type
ZQS 2.5/2
ZQS 2.5/3
ZQS 2.5/4
(see assortment in catalogue 7)
Marking tags
GZ 10.0A
DEK 5/5 / WS 10/5
Status display using a bi-directional LED. With use of inch fuse cartridges.
1282250000 – 2012/2013
Fuse terminals
ZSI 2.5/2 LED
2.5 mm²
For imperial fuses
Terminals, Z-Series
Z-series standard ranges provide solutions for conductor
cross-sections from 0.05 to 35 mm².
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
12.2 x 79.5 x 74
12 / 4
0.13...4
C
IEC 60947-7-3
Rated data
Rated voltage to adjoining terminal
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
IEC
V
A
mm²
12
2.5
UL
CSA
AWG 26...12
AWG 26...12
6 kV / 3
A3 / V-0
?ru#i~a
mm²
mm²
mm/-
Note
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
Max. power loss (1.6 W) at the cartridge fuse limits the rated current.
Ordering data
Version
500 V AC/DC, w/o LED
10-36 V AC/DC, with LED
30-70 V AC/DC, with LED
60-150 V AC/DC, with LED
140-250 V AC/DC, with LED
Note
Type
Qty.
ZSI 2.5/2/LD 28AC
ZSI 2.5/2/LD 60AC
ZSI 2.5/2/LD 120AC
ZSI 2.5/2/LD 250AC
Order No.
1616470000
1616480000
1616490000
1616500000
10
10
10
10
For the fuse insert carrier, the rated voltage is 250 V and the rated impulse
voltage is 4 kV.
Accessories
Pluggable cross-connection
2-pole
3-pole
4-pole
End plate / Partition plate
Dark beige Wemid
Dark beige Wemid
Screwdriver
G-fuse cartridge, 5 x 20mm (IEC 60127-2)
Standard
Note
1282250000 – 2012/2013
current
10 A
10 A
10 A
Width
Qty.
20
20
20
Order No.
1633200000
1633210000
1633220000
ZAP TNHE/ZSI2.5
1.1 mm
25
1610840000
1
1274660000
10
0293900000
SDIS SL 0.6X3.5X100
0.25 A fast
0.50 A fast
1.00 A fast
2.00 A fast
G25 with indicator / imperial (inch) fuse
0.50 A medium slow / 2 A
1.00 A medium slow / 3 A
2.00 A fast / 5 A
4.00 A fast / 10 A
Identification systems
Type
ZQS 2.5/2
ZQS 2.5/3
ZQS 2.5/4
(see assortment in catalogue 7)
Marking tags
GZ 10.0A
DEK 5/5 / WS 10/5
Status display using a bi-directional LED. With use of inch fuse cartridges.
C.57
Fuse terminals
Terminals, Z-Series
ZSI 2.5 2x2 AN
Z-series standard ranges provide solutions for conductor
cross-sections from 0.05 to 35 mm².
2.5 mm²
ZSI 2.5-2
Overload and short-circuit protection
For metric fuses 5 x 20 mm / 5 x 25 mm
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
12.2 x 68 x 55.5
10 / 4
0.13...4
ZSI 2.5-2 / G20
IEC 60947-7-3
Rated data
Rated voltage to adjoining terminal
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
V
A
mm²
IEC
500
10
2.5
Type
ZSI 2.5-2/2X2AN/G20
ZSI 2.5-2/2X2AN/G20/GL
UL
CSA
300 (C)
300 (C)
10 (C)
10 (C)
AWG 26...12
AWG 26...12
4 kV / 3
A3 / V-0
r{u#i
mm²
mm²
mm/-
Note
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
Arrangement
The rated voltage of the fuse must not be exceeded. UL & CSA D = 600 V / 5 A
Individual
In combination
Order No.
1826050000
1826030000
Applications
Only short-circuit
Overload and shortprotection
circuit protection
TA max. Nominal values TA max. Nominal values
39 °C 2.5 W / 6.3 A
41 °C 1.6 W / 6.3 A
Ordering data
Version
500 V AC/DC, w/o LED
10-36 V AC/DC, with LED
60-150 V AC/DC, with LED
140-250 V AC/DC, with LED
Note
Type
ZSI 2.5-2/2X2AN/G20
Qty.
20
Order No.
1826050000
ZSI 2.5-2 / G25
Type
ZSI 2.5-2/2X2AN/G25
ZSI 2.5-2/2X2AN/G25/GL
Order No.
1826200000
1826090000
G 20 = G-fuse cartridge 5 x 20 / G 25 = G-fuse cartridge 5 x 25
G 25 LED versions upon request.
Accessories
Pluggable cross-connection
2-pole
3-pole
4-pole
End plate / Partition plate
Screwdriver
G-fuse cartridge, 5 x 20mm (IEC 60127-2)
Standard
0.25 A fast
0.50 A fast
1.00 A fast
2.00 A fast
G25 with indicator / imperial (inch) fuse
0.50 A medium slow / 2 A
1.00 A medium slow / 3 A
2.00 A fast / 5 A
4.00 A fast / 10 A
Identification systems
Note
C.58
(see assortment in catalogue 7)
Marking tags
Type
ZQV 4/2 GE
current
32 A
Qty.
60
Order No.
1608950000
Width
Individual
In combination
1
1274660000
G 20/0.25A/F
G 20/0.50A/F
G 20/1.00A/F
G 20/2.00A/F
10
10
10
10
0430500000
0430600000
0430700000
0430900000
G 25/0.50A/M WS
G 25/1.00A/M RT
G 25/2.00A/F BL
G 25/4.00A/F BR
10
10
10
10
0510300000
0265800000
0192700000
0192800000
SDIS SL 0.6X3.5X100
Arrangement
Applications
Only short-circuit
Overload and shortprotection
circuit protection
TA max. Nominal values TA max. Nominal values
60 °C
47 °C
DEK 5/5 / WS 10/5
Status display via an LED.
1282250000 – 2012/2013
Fuse terminals
ZSI 2.5 2x2 AN LED
2.5 mm²
For metric fuses 5 x 20 mm / 5 x 25 mm
Terminals, Z-Series
Z-series standard ranges provide solutions for conductor
cross-sections from 0.05 to 35 mm².
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
12.2 x 65 x 55.5
10 / 4
0.13...4
C
IEC 60947-7-3
Rated data
Rated voltage to adjoining terminal
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
IEC
V
A
mm²
10
2.5
UL
CSA
300 (C)
10 (C)
AWG 26...12
AWG 26...12
4 kV / 3
A3 / V-0
r{#i
mm²
mm²
mm/-
Note
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
The rated voltage of the fuse must not be exceeded. UL & CSA D = 600 V / 5 A
Ordering data
Version
500 V AC/DC, w/o LED
10-36 V AC/DC, with LED
60-150 V AC/DC, with LED
140-250 V AC/DC, with LED
Note
Type
Qty.
ZSI 2.5-2/2X2AN/G20/LD1
ZSI 2.5-2/2X2AN/G20/LD3
ZSI 2.5-2/2X2AN/G20/LD4
Order No.
1867440000
1867420000
1879730000
20
20
20
G 20 = G-fuse cartridge 5 x 20 / G 25 = G-fuse cartridge 5 x 25
G 25 LED versions upon request.
Accessories
Pluggable cross-connection
2-pole
3-pole
4-pole
End plate / Partition plate
Screwdriver
G-fuse cartridge, 5 x 20mm (IEC 60127-2)
Standard
0.25 A fast
0.50 A fast
1.00 A fast
2.00 A fast
G25 with indicator / imperial (inch) fuse
0.50 A medium slow / 2 A
1.00 A medium slow / 3 A
2.00 A fast / 5 A
4.00 A fast / 10 A
Identification systems
Note
1282250000 – 2012/2013
(see assortment in catalogue 7)
Marking tags
Type
ZQV 4/2 GE
current
32 A
Qty.
60
Order No.
1608950000
1
1274660000
G 20/0.25A/F
G 20/0.50A/F
G 20/1.00A/F
G 20/2.00A/F
10
10
10
10
0430500000
0430600000
0430700000
0430900000
G 25/0.50A/M WS
G 25/1.00A/M RT
G 25/2.00A/F BL
G 25/4.00A/F BR
10
10
10
10
0510300000
0265800000
0192700000
0192800000
Width
SDIS SL 0.6X3.5X100
DEK 5/5 / WS 10/5
Status display via an LED.
C.59
Fuse terminals
Terminals, Z-Series
ZSI 6-2
Z-series standard ranges provide solutions for conductor
cross-sections from 0.05 to 35 mm².
6 mm²
ZSI 6-2
Overload and short-circuit protection
For metric fuses 5 x 20 mm / 5 x 25 mm
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
12.2 x 68 x 55.5
10 / 10
0.13...10
ZSI 6-2 2x2.5 / G20
IEC 60947-7-3
Rated data
Rated voltage to adjoining terminal
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
V
A
mm²
IEC
500
10
6
Type
ZSI 6-2 2X2.5/G20
ZSI 6-2 2X2.5/G20/GL
UL
CSA
300 (C)
300 (C)
10 (C)
10 (C)
AWG 26...12
AWG 26...8
4 kV / 3
A3 / V-0
r{u#i
mm²
mm²
mm/-
Note
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
Arrangement
The rated voltage of the fuse must not be exceeded. Acc. to UL 600 V / 5 A. A3
terminal points AWG 26-12, A5 terminal points AWG 20-8.
Individual
In combination
Order No.
1820930000
1820860000
Applications
Only short-circuit
Overload and shortprotection
circuit protection
TA max. Nominal values TA max. Nominal values
37 °C 2.5 W / 6.3 A
40 °C 1.6 W / 6.3 A
Ordering data
Version
500 V AC/DC, w/o LED
10-36 V AC/DC, with LED
60-150 V AC/DC, with LED
140-250 V AC/DC, with LED
Note
Type
ZSI 6-2 2X2.5/G20
Qty.
20
Order No.
1820930000
ZSI 6 2x2.5 / G25
Type
ZSI 6-2 2X2.5/G25
ZSI 6-2 2X2.5/G25/GL
Order No.
1820950000
1820940000
G 20 = G-fuse cartridge 5 x 20 / G 25 = G-fuse cartridge 5 x 25
G 25 LED versions upon request.
Accessories
Pluggable cross-connection
2-pole
3-pole
4-pole
End plate / Partition plate
Screwdriver
G-fuse cartridge, 5 x 20mm (IEC 60127-2)
Standard
0.25 A fast
0.50 A fast
1.00 A fast
2.00 A fast
G25 with indicator / imperial (inch) fuse
0.50 A medium slow / 2 A
1.00 A medium slow / 3 A
2.00 A fast / 5 A
4.00 A fast / 10 A
Identification systems
Note
C.60
(see assortment in catalogue 7)
Marking tags
Type
ZQV 6/2 GE
current
41 A
Qty.
60
Order No.
1627850000
Width
Individual
In combination
1
1274670000
G 20/0.25A/F
G 20/0.50A/F
G 20/1.00A/F
G 20/2.00A/F
10
10
10
10
0430500000
0430600000
0430700000
0430900000
G 25/0.50A/M WS
G 25/1.00A/M RT
G 25/2.00A/F BL
G 25/4.00A/F BR
10
10
10
10
0510300000
0265800000
0192700000
0192800000
SDIS SL 0.8X4.0X100
Arrangement
Applications
Only short-circuit
Overload and shortprotection
circuit protection
TA max. Nominal values TA max. Nominal values
60 °C
47 °C
DEK 5/5 / WS 10/5
Status display via an LED.
1282250000 – 2012/2013
Fuse terminals
ZSI 6-2 LED
6 mm²
For metric fuses 5 x 20 mm / 5 x 25 mm
Terminals, Z-Series
Z-series standard ranges provide solutions for conductor
cross-sections from 0.05 to 35 mm².
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
12.2 x 65 x 55.5
10 / 10
0.13...10
C
IEC 60947-7-3
Rated data
Rated voltage to adjoining terminal
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
IEC
V
A
mm²
10
6
UL
CSA
300 (C)
10 (C)
AWG 26...12
AWG 20...8
4 kV / 3
A3 / V-0
r{#i
mm²
mm²
mm/-
Note
Rated connection
0.5...10
0.5...10 / 0.5...6
10 / 0.6 x 3.5 mm
The rated voltage of the fuse must not be exceeded. Acc. to UL 600 V / 5 A. A3
terminal points AWG 26-12, A5 terminal points AWG 20-8.
Ordering data
Version
500 V AC/DC, w/o LED
10-36 V AC/DC, with LED
60-150 V AC/DC, with LED
140-250 V AC/DC, with LED
Note
Type
Qty.
Order No.
ZSI 6-2 2X2.5/G20/LD1
20
1867500000
ZSI 6-2 2X2.5/G20/LD4
20
1879750000
G 20 = G-fuse cartridge 5 x 20 / G 25 = G-fuse cartridge 5 x 25
G 25 LED versions upon request.
Accessories
Pluggable cross-connection
2-pole
3-pole
4-pole
End plate / Partition plate
Screwdriver
G-fuse cartridge, 5 x 20mm (IEC 60127-2)
Standard
0.25 A fast
0.50 A fast
1.00 A fast
2.00 A fast
G25 with indicator / imperial (inch) fuse
0.50 A medium slow / 2 A
1.00 A medium slow / 3 A
2.00 A fast / 5 A
4.00 A fast / 10 A
Identification systems
Note
1282250000 – 2012/2013
(see assortment in catalogue 7)
Marking tags
Type
ZQV 6/2 GE
current
41 A
Qty.
60
Order No.
1627850000
1
1274670000
G 20/0.25A/F
G 20/0.50A/F
G 20/1.00A/F
G 20/2.00A/F
10
10
10
10
0430500000
0430600000
0430700000
0430900000
G 25/0.50A/M WS
G 25/1.00A/M RT
G 25/2.00A/F BL
G 25/4.00A/F BR
10
10
10
10
0510300000
0265800000
0192700000
0192800000
Width
SDIS SL 0.8X4.0X100
DEK 5/5 / WS 10/5
Status display via an LED.
C.61
Fuse terminals
Terminals, Z-Series
ZSI 6-2/FC
Z-series standard ranges provide solutions for conductor
cross-sections from 0.05 to 35 mm².
6 mm²
ZSI 6-2/FC
Overload and short-circuit protection
For car fuses
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
8.1 x 70 x 51
30 / 10
0.33...10
DIN 72581-3, IEC 60947-7-3
Rated data
Rated voltage to adjoining terminal
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
V
A
mm²
IEC
400
30
6
Type
ZSI 6-2/FC
UL
CSA
300 (C)
25 (C)
AWG 22...10
AWG 22...10
6 kV / 3
A5 / V-0
r{u#i
mm²
mm²
mm/-
Note
Rated connection
0.5...10
0.5...10 / 0.5...6
10 / 4.0 x 0.8 mm
Arrangement
Individual
In combination
Fuse continuous current max. 80 % IN.
Ordering data
Version
500 V AC/DC, w/o LED
10-36 V AC/DC, with LED
60-150 V AC/DC, with LED
140-250 V AC/DC, with LED
Note
Type
ZSI 6-2/FC
ZSI 6-2/FC LD
Qty.
25
25
Order No.
1814690000
1814700000
Order No.
1814690000
Applications
Only short-circuit
Overload
protection
TA max. Nominal values TA max. Nominal values
24 °C 3,0 W / 30 A
*
*
28 °C 1.90 W / 24 A (30 A)** *
*
*) Values not available
**) According to information from the manufacturer, the rated value of the fuse
must be reduced to 80 % of the nominal value of the fuse. The permitted
power loss is limited by the surface temperature of the fuse.
⇒The 30 A fuse can be loaded to a maximum 24 A
Car fuses are not available from Weidmüller
Accessories
Pluggable cross-connection
2-pole
3-pole
4-pole
End plate / Partition plate
Screwdriver
G-fuse cartridge, 5 x 20mm (IEC 60127-2)
Standard
Type
ZQV 6/2 GE
ZQV 6/3 GE
ZQV 6/4 GE
SDIS SL 0.8X4.0X100
current
41 A
41 A
41 A
Width
Qty.
60
60
60
Order No.
1627850000
1627860000
1627870000
1
1274670000
0.25 A fast
0.50 A fast
1.00 A fast
2.00 A fast
G25 with indicator / imperial (inch) fuse
0.50 A medium slow / 2 A
1.00 A medium slow / 3 A
2.00 A fast / 5 A
4.00 A fast / 10 A
Identification systems
Note
C.62
(see assortment in catalogue 7)
Marking tags
DEK 5/6 / WS 12/6
Status display using a bi-directional LED. With use of Pudenz fuses.
1282250000 – 2012/2013
Fuse terminals
Width/Length/Height with TS35x7.5
Insulating stripping length
mm
mm
ZSI 2x6/4x2.5 FC
6/2.5 mm²
Circuit breaker ETA 1170
28 V DC
NEW
ZSI 2X6/4X2.5 FC / ZSI 2X6/4X2.5
Overload and short-circuit protection
Terminals, Z-Series
Especially suitable for utility vehicles in combination with
standard car fuses and thermal circuit breakers.
•Simple fuse protection for the plant or facility
•Simplifies the wiring by using ZQV cross-connections
•Simple distribution of potentials
•Vibration-proof
•Optimised wire insertion to connect short-circuit proof
cables
•Pluggable solution for ETA circuit breaker
(Typ 1170) or alternatively car fuses
16 / 93 / 47.5
10
Technical data
Rated data
Rated voltage to adjoining terminal
Rated current
Rated cross-section
Approvals
Other technical data
Clamped conductors
solid H07V-U
stranded H07V-K
„f“ with ferrule acc. DIN 46 228/1
„f“ ferrules with plastic collar
max. clamping range in mm²
gauge acc. to IEC 60 947-1
IEC
500
57
2.5
6
UL
CSA
Output
AWG 26...12
AWG 20...8
in work
Input
AWG 26...12
AWG 20...8
in work
mm²
mm²
mm²
mm²
0.5…4
0.5…4
0.5…2.5
0.5…2.5
0.5…10
0.5…10
0.5…6
0.5…6
Size
0.08…4
0.21…10
V
A
mm²
Note
Type
ZSI 2X6/4X2.5 FC
Arrangement
Individual
In combination
The maximum load of the single circuit breakers shouldn´t be exceeded.
Ordering data
Type
ZSI 2x6/4x2.5 FC
Qty.
10
Order No.
1058520000
Qty.
60
Order No.
1627850000
50
1059310000
1
1
9008330000
9008340000
Note
Order No.
1058520000
C
Applications
ETA fuse
Automotive fuse
TA max. Nominal values TA max. Nominal values
24 °C 1.68 W / 20 A (25 A)* 45 °C 1.9 W / 24 A (30 A)**
24 °C 1.68 W / 20 A (25 A)* 35 °C 1.9 W / 24 A (30 A)**
*) ETA circuit breakers 1170 According to information from the manufacturer, the rated value of the fuse
must be reduced to 80 % of the nominal value of the fuse. The permitted power
loss is limited by the surface temperature of the fuse.
⇒The 25 A fuse can be loaded to a maximum 20 A
**) Automotive fuses in accordance with DIN 41576
According to information from the manufacturer, the rated value of the fuse
must be reduced to 80 % of the nominal value of the fuse. The permitted
power loss is limited by the surface temperature of the fuse.
⇒The 30 A fuse can be loaded to a maximum 24 A
Accessories
Pluggable cross-connection
2-pole
3-pole
4-pole
Type
ZQV 6/2 GE
Current
41 A
End plate / partition
ZAP black Wemid
ZAP ZSI2x6/4x2.5
Screwdriver
SD acc. to DIN 5264-A
Circuit breaker ETA and car fuses*
Rated voltage
Rated current
Switching capacity
Protection
A
A
IP
Rated current circuit breaker
A
ETA 1180
ETA 1170
Marking systems
(see assortment in catalogue 7)
Marking tags
SD 0.6x3.5
SD 0.8x4
Circuit breaker 1170
28 V DC
3…25
400
40
Circuit breaker 1170
3
4
5
6
7.5
8
10
15
20
25
Colour
violet
pink
orange
green
brown
yellow
red
blue
yellow
white
Order No.
1278730000
1278740000
1278750000
1278760000
1278770000
1278780000
1278790000
1278810000
1278820000
1278830000
DEK 5/5 MC
*) Note:
not possible to order from Weidmüller
1282250000 – 2012/2013
C.63
Terminals, Z-Series
Fuse terminals
Especially suitable for utility vehicles in combination with
standard car fuses and thermal circuit breakers.
•Simple fuse protection for the plant or facility
•Simplifies the wiring by using ZQV cross-connections
•Simple distribution of potentials
•Vibration-proof
•Optimised wire insertion to connect short-circuit proof
cables
•Pluggable solution for ETA circuit breaker (Typ 1180)
Width/Length/Height with TS35x7.5
Insulating stripping length
C
ZSI 2x6/4x2.5
6/2.5 mm²
Circuit breaker ETA 1180
65 V DC / 250 V AC
NEW
ZSI 2X6/4X2.5 FC / ZSI 2X6/4X2.5
Overload and short-circuit protection
mm
mm
Technical data
Rated data
Rated voltage to adjoining terminal
Rated current
Rated cross-section
Approvals
Other technical data
Clamped conductors
solid H07V-U
stranded H07V-K
„f“ with ferrule acc. DIN 46 228/1
„f“ ferrules with plastic collar
max. clamping range in mm²
gauge acc. to IEC 60 947-1
UL
CSA
Output
AWG 26...12
AWG 20...8
in work
Input
AWG 26...12
AWG 20...8
in work
mm²
mm²
mm²
mm²
0.5…4
0.5…4
0.5…2.5
0.5…2.5
0.5…10
0.5…10
0.5…6
0.5…6
Size
0.08…4
0.21…10
V
A
mm²
Note
IEC
500
57
2.5
6
Type
ZSI 2X6/4X2.5
Arrangement
Individual
In combination
The maximum load of the single circuit breakers shouldn´t be exceeded.
Ordering data
Type
ZSI 2x6/4x2.5
Qty.
10
Order No.
1265990000
Qty.
60
Order No.
1627850000
50
1059310000
1
1
9008330000
9008340000
Note
Order No.
1265990000
Applications
ETA fuse
Automotive fuse
TA max. Nominal values TA max. Nominal values
24 °C 1.68 W / 20 A (25 A)* 45 °C 1.9 W / 24 A (30 A)**
24 °C 1.68 W / 20 A (25 A)* 35 °C 1.9 W / 24 A (30 A)**
*) ETA circuit breakers 1170 According to information from the manufacturer, the rated value of the fuse
must be reduced to 80 % of the nominal value of the fuse. The permitted power
loss is limited by the surface temperature of the fuse.
⇒The 25 A fuse can be loaded to a maximum 20 A
**) Automotive fuses in accordance with DIN 41576
According to information from the manufacturer, the rated value of the fuse
must be reduced to 80 % of the nominal value of the fuse. The permitted
power loss is limited by the surface temperature of the fuse.
⇒The 30 A fuse can be loaded to a maximum 24 A
Accessories
Pluggable cross-connection
2-pole
3-pole
4-pole
Type
ZQV 6/2 GE
Strom
41 A
End plate / partition
ZAP black Wemid
ZAP ZSI2x6/4x2.5
Screwdriver
SD acc. to DIN 5264-A
Circuit breaker ETA and car fuses*
Rated voltage
Rated current
Switching capacity
Protection
A
A
IP
Rated current circuit breaker
A
ETA 1180
ETA 1170
Marking systems
(see assortment in catalogue 7)
Marking tags
SD 0.6x3.5
SD 0.8x4
Circuit breaker 1180
65 V DC / 250 V AC
0.1...10
400
40
Circuit breaker 1180
Order No.
0.1
1278840000
0.2
1278850000
0.25
1278860000
0.3
1278870000
0.4
1278880000
0.5
1278910000
0.6
1278920000
0.7
1278930000
0.8
1278940000
1
1278950000
1.5
1278960000
2
2.5
3
3.5
4
5
6
7
8
10
Order No.
1278970000
1278980000
1278990000
1279010000
1279020000
1279030000
1279040000
1279050000
1279060000
1279070000
DEK 5/5 MC
*) Note:
not possible to order from Weidmüller
C.64
1282250000 – 2012/2013
Fuse terminals – Accessories
Cartridge fuses
For terminal type
ZSI 2.5
ZSI 6-2 2 x 2.5/G20...
ZSI 2.5 2 x 2 AN/G20...
ZSI 2.5/ 5 x 25
ZSI 6-2 2 x 2.5/G25...
ZSI 2.5 2 x 2 AN/G25...
ZSI 2.5/2
Technical data / Ordering data
G-type cartridge fuses 5 x 20 without indicators to IEC 60127-2 (VDE 0820 pt.2 Bl 1)
Size (mm)
Nom. current (A) Type
0.1
(F)
0.2
(F)
5 x 20
0.25
(F)
breaking capacity 1500 A
0.5
(F)
(at 250 V, 50 Hz, cos : 0.7)
0.63
(F)
1.0
(F)
1.6
(F)
2.0
(F)
2.5
(F)
3.15
(F)
4.0
(F)
5.0
(F)
6.3
(F)
G 20/0.10A/F
G 20/0.20A/F
G 20/0.25A/F
G 20/0.50A/F
G 20/0.63A/F
G 20/1.00A/F
G 20/1.60A/F
G 20/2.00A/F
G 20/2.50A/F
G 20/3.15A/F
G 20/4.00A/F
G 20/5.00A/F
G 20/6.30A/F
Qty.
10
10
10
10
10
10
10
10
10
10
10
10
10
Order No.
0430300000
0430400000
0430500000
0430600000
0439000000
0430700000
0430800000
0430900000
0431000000
0431100000
0431200000
0431300000
0431400000
(M) = medium-blow (F) = fast-blow
G-type cartridge fuses 5 x 25 with indicators to DIN 415761)
0.25
(M)
G 25/0.25A/M
5 x 25 m. K.1)
0.5
(M)
G 25/0.50A/M
breaking capacity 80 A
0.8
(M)
G 25/0.80A/M
(at 250 V, 50 Hz, cos : = 1)
1
(M)
G 25/1.00A/M
G 25/10.0A/M
10
(M)5)
2
(F)
G 25/2.00A/F
4
(F)
G 25/4.00A/F
6.3
(F)
G 25/6.30A/F
10
10
10
10
10
10
10
10
0546900000
0510300000
0646400000
0265800000
0193100000
0192700000
0192800000
0192900000
10
10
10
10
10
10
10
10
0533800000
0525500000
0294500000
0295700000
0294600000
0295800000
0293900000
0245400000
Cartridge fuses 1¼" x ¼" without indicators to BS 88
33 kA breaking capacity 33 kA fast-blow
E  0.5
A
E  1
A
E  2
A
E  3
A
E  5
A
E  7
A
E 10
A
Terminals, Z-Series
Cartridge fuses and gauge pieces for Weidmüller fuse terminals
C
(M) = medium-blow (F) = fast-blow
0.5
1
2
3
5
7
10
12.5
GZ 0.5A/F
GZ 1.0A/F
GZ 2.0A
GZ 3.0A
GZ 5.0A
GZ 7.0A
GZ 10.0A
GZ 12.5A FF
(M) = medium-blow (F) = fast-blow
Note: 1) The SIBA company also supplies G-type cartridge fuses 5 x 25 with indicators suitable for 450 V∼ shipbuilding applications.
1282250000 – 2012/2013
C.65
Terminals, Z-Series
Test-disconnect terminals
Standard model and Roof-style
ZTR 2.5
Z-series standard ranges provide solutions for conductor
cross-sections from 0.05 to 35 mm².
Two connections
2.5 mm²
ZTR 2.5/3AN
2.5 mm²
Three connections
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 59.5 x 41
20 / 4
0.05...4
5.1 x 79.5 x 41
20 / 4
0.05...4
IEC 60947-7-1
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
IEC
500
20
2.5
V
A
mm²
mm²
mm²
mm/-
Note
UL
CSA
600 (C)
600 (C)
20 (C)
15 (C)
AWG 30...12
AWG 30...12
6 kV / 3
A3 / V-0
IEC
500
20
2.5
UL
CSA
600 (C)
300 (C)
20 (C)
10 (C)
AWG 30...12
AWG 26...12
6 kV / 3
A3 / V-0
r a
ra
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
Type
ZTR 2.5
ZTR 2.5 BL
ZTR 2.5/O.TNHE
ZTR 2.5 OR
Order No.
1831280000
8731710000
1831130000
8731680000
Type
ZTR 2.5/3AN
ZTR 2.5/3AN BL
ZTR 2.5/3AN/O.TNHE
ZTR 2.5/3AN OR
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
Ordering data
Version
Dark beige Wemid
Blue Wemid
Without isolator, Dark beige Wemid
Orange Wemid
Qty.
100
100
100
100
Note
Qty.
100
100
100
100
Order No.
8731720000
8731730000
8728450000
8731690000
Accessories
Pluggable cross-connection
2-pole
3-pole
4-pole
10-pole
End plate / Partition plate
End bracket
Screwdriver
Testing / Checking
Holder for cartridge fuse 5 x 20mm
Module connector (max, 250 V)
Test adapter
Disconnect plug
Identification systems
Note
C.66
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
Dark beige Wemid
ZAP/TW 1
Dark beige Wemid
ZEW 35
Standard
SDIS SL 0.6X3.5X100
Test plug
PS 2.3 RT
400 V AC/DC, without LED
10 - 36 V AC/DC, red LED
140 - 250 V AC/DC, red LED
SIHA 3/G20
SIHA 3/G20/LD 10-36V
SIHA 3/G20/LD 140-250V
current
24 A
24 A
24 A
24 A
Width
2 mm
Qty.
60
60
60
20
Order No.
1608860000
1608870000
1608880000
1608940000
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
50
1608740000
ZAP/TW 3
6 mm
20
9540000000
ZEW 35
1
1274660000
SDIS SL 0.6X3.5X100
5.4 mm
20
0180400000
PS 2.3 RT
5.95 mm
5.95 mm
5.95 mm
25
25
25
7921560000
7921570000
7921600000
SIHA 3/G20
SIHA 3/G20/LD 10-36V
SIHA 3/G20/LD 140-250V
current
24 A
24 A
24 A
24 A
Width
2 mm
Qty.
60
60
60
20
Order No.
1608860000
1608870000
1608880000
1608940000
50
1608800000
6 mm
20
9540000000
1
1274660000
5.4 mm
20
0180400000
5.95 mm
5.95 mm
5.95 mm
25
25
25
7921560000
7921570000
7921600000
without fittings
with wire jumper
With 1N4007 diode
BEST
BEST/DRBR
BEST/D
5.1 mm
5.1 mm
5.1 mm
50
50
50
1833100000
1878570000
1878560000
BEST
BEST/DRBR
BEST/D
5.1 mm
5.1 mm
5.1 mm
50
50
50
1833100000
1878570000
1878560000
Standard
With assembly peg
ZTA 1
ZTA 1/ZA
5.1 mm
5.1 mm
25
25
1609040000
1609050000
ZTA 1
ZTA 1/ZA
5.1 mm
5.1 mm
25
25
1609040000
1609050000
50
1833090000
TNST
50
1833090000
removable, as replacement for release lever
(see assortment in catalogue 7)
Marking tags
TNST
DEK 5/5 / WS 10/5
DEK 5/5 / WS 10/5
If the disconnect lever is replaced by the SIHA 3, a fused terminal is created.
If the disconnect lever is replaced by the SIHA 3, a fused terminal is created.
1282250000 – 2012/2013
Test-disconnect terminals
ZTR 2.5/4AN
2.5 mm²
2.5 mm²
Four connections
5.1 x 82.5 x 41
16 / 2.5
0.05...2.5
5.1 x 117 x 68
16 / 4
0.13...4
IEC 60947-7-1
IEC
400
16
2.5
ZDTR 2.5
Terminals, Z-Series
Four connections
C
IEC 60947-7-1
UL
CSA
300 (D)
300 (C)
10 (D)
10 (C)
AWG 30...12
AWG 26...12
6 kV / 3
A2 / V-0
IEC
400
16
2.5
UL
CSA
300 (D)
300 (B)
10 (D)
10 (B)
AWG 26...12
AWG 26...12
6 kV / 3
A2 / V-0
r{ia
r#a
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
Type
ZTR 2.5/4AN
ZTR 2.5/4AN BL
ZTR 2.5/4AN/O.TNHE
ZTR 2.5/4AN OR
Order No.
7920900000
7920930000
7920950000
7920940000
Type
ZDTR 2.5
ZDTR 2.5 BL
Rated connection
0.5...2.5
0.5...2.5 / 0.5...1.5
10 / 0.6 x 3.5 mm
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZAP/TW 3
ZEW 35
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
Qty.
100
100
100
100
current
24 A
24 A
24 A
24 A
Width
2 mm
Qty.
60
60
60
20
Order No.
1608860000
1608870000
1608880000
1608940000
Type
ZQV 2.5N/2 GE
ZQV 2.5N/3 GE
ZQV 2.5N/4 GE
ZQV 2.5N/10 GE
50
1608800000
AP ZDTR2.5
6 mm
20
9540000000
ZEW 35
1
1274660000
SDIS SL 0.6X3.5X100
5.4 mm
20
0180400000
PS 2.3 RT
5.95 mm
5.95 mm
5.95 mm
25
25
25
7921560000
7921570000
7921600000
SIHA 2/G20 10-36V
SIHA 2/G20 140-250V
5.1 mm
5.1 mm
5.1 mm
50
50
50
1833100000
1878570000
1878560000
BEST
BEST/DRBR
BEST/D
50
1833090000
SDIS SL 0.6X3.5X100
PS 2.3 RT
SIHA 3/G20
SIHA 3/G20/LD 10-36V
SIHA 3/G20/LD 140-250V
BEST
BEST/DRBR
BEST/D
TNST
Qty.
20
20
Order No.
1745400000
1798330000
current
24 A
24 A
24 A
24 A
Width
1.5 mm
Qty.
60
60
60
20
Order No.
1693800000
1693810000
1693820000
1693880000
20
1745420000
6 mm
20
9540000000
1
1274660000
5.4 mm
20
0180400000
5.95 mm
5.95 mm
25
25
9543070000
9537640000
5.1 mm
5.1 mm
5.1 mm
50
50
50
1833100000
1878570000
1878560000
WS 10/5 / DEK 5/5
DEK 5/5
If the disconnect lever is replaced by the SIHA 3, a fused terminal is created.
If the disconnect lever is replaced by the SIHA 3 (only on the top level), a fused
terminal is created.
1282250000 – 2012/2013
C.67
Test-disconnect terminals
Comparison measurement for L1
Terminals, Z-Series
Test-disconnect terminal blocks for measuring with ZTL 6
N:K
BZT ZTL 6 (8)
N:K
N:K
SSP ZTL 6 (6)
(5) STB 21.6 SW
ZTW ZTL 6 (7)
$
9
(11) STB 21.6 VI
KSBR/2 (4)
(10) STB 21.6 GN
ZTL 6 (3)
(9) STB 21.6 GE
N
O
N
O
N
O
/
/
/
1
/
/
/
1
3(
C
(2) ZTD 6
ZQV 6/30 (13)
(1) ZEW TS 35
Operation depending on the operating status:
1.Connect ammeter to test sockets of terminal 2.
2.Open disconnect slide link of terminal 2.
3.Connect voltameter to test sockets of terminals 7
and 10.
Meter test for L1 through external power supply
Pos. Type
1 ZEW TS 35 (nur TS 35)
1 EWK1 (nur TS 32)
2 ZTD 6
3 ZTL 6
4 KSBR/2
5 STB 21.6 SW
6 SSP ZTL 6
7 ZTW ZTL 6
8 BZT ZTL 6
Optionally available for better labelling
(instead of 11 x Pos. 5):
Pos. Type
5 STB 21.6 BE
9 STB 21.6 GE
10 STB 21.6 GN
11 STB 21.6 VI
12 STB 21.6 BL
Optionally available for a shared k-point:
Qty.
20
50
20
20
50
50
100
20
20
N:K
WY
Order No.
9540000000
0206160000
1771810000
1771800000
1771820000
1071040000
1771860000
1771870000
1781140000
ZTL 6/STB
N:K
N:K
N
O
N
O
N
O
/
/
/
1
/
/
/
Qty.
50
50
50
50
50
1
Order No.
1071000000
1071010000
1071020000
1071030000
1071080000
3(
Operation depending on the operating status:
1.Close short-circuit slide of terminals 1 and 2.
2.Open disconnect slide link of terminals 2 and 7.
3.Connect external power supply to the sockets of
terminals 1, 2 and 7, 10.
ZTD 6/STB
Changing the meter for L1
Operating status
N:K
(with internal distribution of the k-point)
N:K
N:K
N:K
N:K
N:K
N
O
N
O
N
O
/
/
/
1
/
/
N
O
N
O
N
O
/
/
/
1
/
1
/
3(
/
/
1
3(
C.68
Operation depending on the operating status:
1.Close short-circuit slide of terminals 1 and 2.
2.Open disconnect slide link of terminals 2 and 7.
3.Disconnect meter for L1 at terminals 1, 2 and 7.
1282250000 – 2012/2013
Test-disconnect terminals
ZTD 6
6 mm²
Feed-through terminal
ZTL 6
6 mm²
Disconnect test terminal
Terminals, Z-Series
Terminal for power supply
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
8 x 106 x 48
52 / 10
0.5...10
8 x 106 x 48
52 / 10
0.5...10
V
A
mm²
IEC
800
41
6
C
IEC 60947-7-1
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
UL
CSA
300 (C)
300 (C)
33 (C)
33 (C)
AWG 20...8
AWG 20...8
8 kV / 3
A5 / V-0
IEC
800
41
6
UL
CSA
300 (C)
300 (C)
33 (C)
33 (C)
AWG 20...8
AWG 20...8
8 kV / 3
A5 / V-0
ra
ra
400 V when used as a disconnect terminal. Tightening torque for ZTL 6 disconnection element with screw = 0.5 - 0.6 Nm.
400 V when used as a disconnect terminal. Tightening torque for ZTL 6 disconnection element with screw = 0.5 - 0.6 Nm.
Without socket
with socket
Type
ZTD 6
ZTD 6/STB
Order No.
1771810000
1771960000
Type
ZTL 6
ZTL 6/STB
2-pole
3-pole
4-pole
Type
ZQV 6/2 GE
ZQV 6/3 GE
ZQV 6/4 GE
mm²
mm²
mm/-
Note
Rated connection
0.5...10 / 1.5...6
0.5...6 / 0.5...6
13 / 0.8 x 4.0 mm
Rated connection
0.5...10 / 1.5...6
0.5...6 / 0.5...6
13 / 0.8 x 4.0 mm
Ordering data
Version
Qty.
20
20
Note
Qty.
20
20
Order No.
1771800000
1771950000
Accessories
Pluggable cross-connection
End plate / Partition plate
Testing / Checking
Miscellaneous accessories
Marker holder
Identification systems
Note
1282250000 – 2012/2013
End plate
Test plug
Socket - blue
Socket - yellow
Socket - green
Socket - magenta
Lockout device
Short-circuit plug, 2-pole
Short-circuit plug, 3-pole
Short-circuit plug, 4-pole
Qty.
60
60
60
Order No.
1627850000
1627860000
1627870000
Type
ZQV 6/2 GE
ZQV 6/3 GE
ZQV 6/4 GE
ZTW ZTL6
current
41 A
41 A
41 A
Width
2 mm
20
1771870000
PS 4 F.STB 4
STB 21.6/IH/BL WTL6/3
STB 21.6/IH/GE WTL6/3
STB 21.6/IH/GN WTL6/3
STB 21.6/IH/VI WTL6/3
7.6 mm
6.2 mm
6.2 mm
6.2 mm
6.2 mm
20
50
50
50
50
13.7 mm
23.2 mm
31.3 mm
7.8 mm
KSBR/2 ZTL6
KSBR/3 ZTL6
KSBR/4 ZTL6
BZT ZTL6
(see assortment in catalogue 7)
Marking tags
Qty.
60
60
60
Order No.
1627850000
1627860000
1627870000
ZTW ZTL6
current
41 A
41 A
41 A
Width
2 mm
20
1771870000
0299600000
1071080000
1071010000
1071020000
1071030000
PS 4 F.STB 4
STB 21.6/IH/BL WTL6/3
STB 21.6/IH/GE WTL6/3
STB 21.6/IH/GN WTL6/3
STB 21.6/IH/VI WTL6/3
7.6 mm
6.2 mm
6.2 mm
6.2 mm
6.2 mm
20
50
50
50
50
0299600000
1071080000
1071010000
1071020000
1071030000
20
20
20
1771820000
1771830000
1771840000
SSP ZTL6
KSBR/2 ZTL6
KSBR/3 ZTL6
KSBR/4 ZTL6
6 mm
13.7 mm
23.2 mm
31.3 mm
100
20
20
20
1771860000
1771820000
1771830000
1771840000
20
1781140000
BZT ZTL6
7.8 mm
20
1781140000
DEK 5/8 / WS 12/6,5
DEK 5/8 / WS 12/6,5
Pluggable label holders for additional labelling tags are above the cross-connection channel (BZT ZTL 6).
Pluggable label holders for additional labelling tags are above the cross-connection channel (BZT ZTL 6).
C.69
Terminals, Z-Series
Test-disconnect terminals
Standard model and Roof-style
ZTR 2.5-2
The compact terminal range for conductor cross-sections
0.13 to 16 mm.
Two connections
2.5 mm²
ZTR 6-2
6 mm²
2 connections
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 50.5 x 44
21 / 2.5
0.13...2.5
8.1 x 70 x 51
30 / 10
0.05...10
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
IEC
400
10
2.5
V
A
mm²
UL
CSA
300 (D)
300 (C)
10 (D)
10 (C)
AWG 26...12
AWG 26...12
6 kV / 3
A2 / V-0
IEC
500
30
6
Note
CSA
6 kV / 3
A5 / V-0
ruia
mm²
mm²
mm/-
UL
Rated connection
0.5...2.5
0.5...2.5 / 0.5...1.5
10 / 0.6 x 3.5 mm
Rated connection
0.5...10 / 0.5...6
0.5...6 / 0.5...6
12 / 0.6 x 3.5 mm
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
Ordering data
Version
Dark beige Wemid
Blue Wemid
Without isolator, Dark beige Wemid
Orange Wemid
Type
ZTR 2.5-2
ZTR 2.5-2 BL
ZTR 2.5-2/O.TNHE
ZTR 2.5-2 OR
Qty.
100
100
100
100
Note
Order No.
1779010000
1779120000
1779020000
1779130000
Type
ZTR 6-2
Order No.
1608860000
1608870000
1608880000
1608940000
Type
ZQV 6/2 GE
ZQV 6/3 GE
ZQV 6/4 GE
current
41 A
41 A
41 A
Qty.
60
60
60
Order No.
1627850000
1627860000
1627870000
ZQV 6/24 GE
10
1908990000
50
1771440000
20
9540000000
1
9008390000
Qty.
50
Order No.
1023830000
Accessories
Pluggable cross-connection
End plate / Partition plate
End bracket
Screwdriver
Holder for cartridge fuse 5 x 20mm
Module connector (max, 250 V)
Disconnect plug
Identification systems
Note
C.70
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
current
24 A
24 A
24 A
24 A
Dark beige Wemid
ZAP/TW7
Width
2.5 mm
50
1706110000
ZAP ZDU6-2
41 A
Width
2 mm
Dark beige Wemid
ZEW 35
6 mm
20
9540000000
ZEW 35
6 mm
1
1274660000
SDIS 0.6X3.5X100
5.95 mm
5.95 mm
5.95 mm
25
25
25
7921560000
7921570000
7921600000
5.1 mm
5.1 mm
5.1 mm
50
50
50
1833100000
1878570000
1878560000
50
1833090000
2-pole
3-pole
4-pole
10-pole
20-/24-pole
Standard
400 V AC/DC, without LED
10 - 36 V AC/DC, red LED
140 - 250 V AC/DC, red LED
without fittings
with wire jumper
With 1N4007 diode
removable, as replacement for release lever
(see assortment in catalogue 7)
Marking tags
SDIS SL 0.6X3.5X100
SIHA 3/G20
SIHA 3/G20/LD 10-36V
SIHA 3/G20/LD 140-250V
BEST
BEST/DRBR
BEST/D
TNST
Qty.
60
60
60
20
DEK 5/5 / WS 14/5
If the disconnect lever is replaced by the SIHA 2, a fused terminal is created.
1282250000 – 2012/2013
Earth wire disconnect terminal blocks
ZTR 6-2 E
6 mm²
Operation mode
Terminals, Z-Series
Roof-style
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Operating mode
8.1 x 70 x 51
20 / 10
0.05...10
ZTR6-2 E
C
Technical data
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
V
A
mm²
IEC
230
20
6
UL
CSA
8 kV / 3
A5 / V-0
mm²
mm²
mm/-
• Slide link is closed
• Auxiliary circuit is earthed
• Display is illuminated green
Rated connection
0.5...10 / 0.5...6
0.5...6 / 0.5...6
12 / 0.6 x 3.5 mm
Test position
When measuring insulation resistance with voltages
greater than UNom, the earth connection must first
be disconnected.
Note
Ordering data
Version
Dark beige Wemid, 230 V UC
Dark beige Wemid, 24 V DC
Type
ZTR 6-2 E / 230V UC
ZTR 6-2 E / 24V DC
Qty.
10
10
Order No.
8817930000
8817920000
Note
ZTR6-2 E
Accessories
End plate / Partition plate
End bracket
Test adapter
Screwdriver
Dark beige Wemid
Type
ZAP ZDU6-2
Width
2 mm
Qty.
50
Order No.
1771440000
Dark beige Wemid
ZEW 35
6 mm
20
9540000000
With assembly peg
ZTA 7/ZA
8.1 mm
25
1780670000
1
9008390000
Standard
SDIS 0.6X3.5X100
• Slide link is opened
• Auxiliary circuit is not earthed
• No earth fault
• Display illuminated green and red with reduced
intensity
• Disconnected earth connection -> When measuring
insulation resistance with voltages greater than
UNom, the earth connection must be disconnected.
Operational malfunction
ZTR6-2 E
(see assortment in catalogue 7)
• Slide link is opened
• Auxiliary circuit is not earthed
• Earth fault
• Display is illuminated red
Note
1282250000 – 2012/2013
C.71
Installation terminals
Terminals, Z-Series
ZDU 2.5 S
N-cross-connections with busbar system 10 x 3 mm.
2.5 mm²
Two connections
ZDU 4 S
4 mm²
Two connections
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 61 x 44
24 / 4
0.5...4
6.1 x 64.2 x 46
32 / 6
0.5...6
IEC 60947-7-1
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
IEC
400
24
2.5
V
A
mm²
UL
CSA
IEC
400
32
4
6 kV / 3
A2 / V-0
mm²
mm²
mm/-
Note
UL
CSA
6 kV / 3
A3 / V-0
#
#
The supply to the busbar is via a busbar connection (ZB 35, ZB 16 or ZF 4S).
The supply to the busbar is via a busbar connection (ZB 35, ZB 16 or ZF 4S).
Type
ZDU 2.5 S
ZDU 2.5 S BL
Type
ZDU 4 S
ZDU 4 S BL
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
Rated connection
0.5...6
0.5...4 / 0.5...4
10 / 0.6 x 3.5 mm
Ordering data
Version
Dark beige Wemid
Blue Wemid
Note
Qty.
100
100
Order No.
1808010000
1808020000
Qty.
100
100
Order No.
1808360000
1808370000
The distance from holding plate to holding plate should be 200 mm.
The distance from holding plate to holding plate should be 200 mm.
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
Accessories
Pluggable cross-connection
End plate / Partition plate
2-pole
3-pole
4-pole
10-pole
20-/24-pole
Dark beige Wemid
Blue Wemid
Support bracket for 10 x 3 (required every 20 cm)
Blue Wemid
For a vertical installation position
End bracket
Screwdriver
Identification systems
Dark beige Wemid
current
24 A
24 A
24 A
24 A
24 A
Width
2 mm
2 mm
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
Type
ZQV 4/2 GE
ZQV 4/3 GE
ZQV 4/4 GE
ZQV 4/10 GE
ZQV 4/20 GE
20
20
1808030000
1808040000
ZAP ZDU 4 S
ZAP ZDU 4 S BL
ZHP S
ZHP S SO
3 mm
3 mm
20
20
1808290000
1808280000
ZEW 35
6 mm
20
1
ZAP ZDU 2.5 S
ZAP ZDU 2.5 S BL
Standard
SDIS SL 1.0X4.5X125
(see assortment in catalogue 7)
Marking tags
DEK 5/5 / WS 10/5
current
32 A
32 A
32 A
32 A
32 A
Width
2 mm
2 mm
Qty.
60
60
60
20
20
Order No.
1608950000
1608960000
1608970000
1609030000
1909010000
20
20
1808380000
1808390000
ZHP S
ZHP S SO
3 mm
3 mm
20
20
1808290000
1808280000
9540000000
ZEW 35
6 mm
20
9540000000
1274680000
SDIS SL 0.6X3.5X100
1
1274660000
DEK 5/5 / WS 10/6
Note
C.72
1282250000 – 2012/2013
Installation terminals
6 mm²
Two connections
10 mm²
Two connections
8.1 x 64.35 x 50.09
41 / 10
0.5...10
IEC 60947-7-1
IEC
400
41
6
ZDU 10/S
UL
CSA
ZDU 16/S
10 x 86.5 x 48.5
76 / 16
1.3...16
12 x 95 x 48.5
76 / 25
1.5...25
IEC 60947-7-1
IEC 60947-7-1
IEC
400
57
10
6 kV / 3
A5 / V-0
16 mm²
Two connections
UL
CSA
600 (C)
300 (C)
60 (C)
55 (C)
AWG 16...6
AWG 16...6
6 kV / 3
A6 / V-0
IEC
400
76
16
Terminals, Z-Series
ZDU 6S
C
UL
CSA
600 (C)
300 (C)
65 (C)
65 (C)
AWG 14...4
AWG 14...4
6 kV / 3
A7 / V-0
#
r{#i
r#ia
The supply to the busbar is via a busbar connection (ZB 35, ZB 16 or ZF 4S).
The supply to the busbar is via a busbar connection (ZB 35, ZB 16 or ZF 4S).
The supply to the busbar is via a busbar connection (ZB 35, ZB 16 or ZF 4S).
Type
ZDU 6 S
ZDU 6 S BL
Type
ZDU 10S
ZDU 10S BL
Type
ZDU 16S
ZDU 16S BL
Rated connection
0.5...10
0.5...10 / 0.5...6
12 / 0.6 x 3.5 mm
Rated connection
1.5...16 / 1.5...16
1.5...10 / 1.5...10
18 / 1.0 x 5.5 mm
Qty.
100
100
Order No.
1808230000
1808240000
Rated connection
1.5...16 / 16...25
1.5...16 / 1.5...16
18 / 1.0 x 5.5 mm
Qty.
25
25
Order No.
1739540000
1739550000
Qty.
25
25
Order No.
1739580000
1739590000
The distance from holding plate to holding plate should be 200 mm.
The distance from holding plate to holding plate should be 200 mm.
The distance from holding plate to holding plate should be 200 mm.
Type
ZQV 6/2 GE
ZQV 6/3 GE
ZQV 6/4 GE
current
41 A
41 A
41 A
Qty.
60
60
60
Order No.
1627850000
1627860000
1627870000
Type
ZQV 10/2
ZQV 6/24 GE
10
1908990000
ZAP ZDU 6 S
ZAP ZDU 6 S BL
41 A
Width
2 mm
2 mm
20
20
1808250000
1808260000
ZHP S
ZHP S SO
3 mm
3 mm
20
20
1808290000
1808280000
ZEW 35
6 mm
20
1
SDIS SL 0.8X4.0X100
DEK 5/8 / WS 10/6
1282250000 – 2012/2013
current
17.5 A
Qty.
25
Order No.
1739680000
Type
ZQV 16/2
ZAP ZDU10/16S
Width
2 mm
20
1739660000
9540000000
ZEW 35
6 mm
20
1274670000
SDIS SL 1.0X4.5X125
1
DEK 5/5
current
76 A
Qty.
25
Order No.
1739690000
ZAP ZDU10/16S
Width
2 mm
20
1739660000
9540000000
ZEW 35
6 mm
20
9540000000
1274680000
SDIS SL 1.0X4.5X125
1
1274680000
DEK 5/5
C.73
Installation terminals
Terminals, Z-Series
ZNT 6 S
N-cross-connections with busbar system 10 x 3 mm.
6 mm²
Two connections
ZNT 10 S
10 mm²
Two connections
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
8.1 x 64.35 x 50.09
41 / 10
0.5...10
NT
IEC
250
41
6
V
A
mm²
UL
CSA
IEC
400
57
10
4 kV / 3
A5 / V-0
mm²
mm²
mm/-
Note
NT
IEC 60947-7-1
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
10 x 86.5 x 50
/ 16
1.3...16
UL
CSA
600 (C)
300 (C)
55 (C)
55 (C)
AWG 16...6
AWG 16...6
6 kV / 3
A6 / V-0
#
r{#i
The supply to the busbar is via a busbar connection (ZB 35, ZB 16 or ZF 4S).
The supply to the busbar is via a busbar connection (ZB 35, ZB 16 or ZF 4S).
Type
Type
Rated connection
0.5...10
0.5...10 / 0.5...6
12 / 0.6 x 3.5 mm
Rated connection
1.5...16 / 1.5...16
1.5...10 / 1.5...10
18 / 1.0 x 5.5 mm
Ordering data
Version
Dark beige Wemid
Blue Wemid
Note
Qty.
ZNT 6 S
Order No.
1808320000
50
Qty.
ZNT 10S
Order No.
1739560000
25
The distance from holding plate to holding plate should be 200 mm.
The distance from holding plate to holding plate should be 200 mm.
Type
ZQV 6/2 GE
ZQV 6/3 GE
ZQV 6/4 GE
ZQV 6/24 GE
Accessories
Pluggable cross-connection
End plate / Partition plate
2-pole
3-pole
4-pole
20-/24-pole
Dark beige Wemid
Blue Wemid
Support bracket for 10 x 3 (required every 20 cm)
Blue Wemid
For a vertical installation position
End bracket
Screwdriver
Busbar 10 x 3 (140 A)
Dark beige Wemid
Standard
OK, Busbar up to OK, TS35 = 25.5 mm
Clamping yoke for power supply to 10 x 3 busbars
Rigid / flexible 0.5 - 6 / 4 mm²
Rigid / flexible 6 - 16 mm²
Flexible 16 - 35 mm²
Identification systems
(see assortment in catalogue 7)
Marking tags
current
41 A
41 A
41 A
41 A
Width
2 mm
2 mm
Qty.
60
60
60
10
Order No.
1627850000
1627860000
1627870000
1908990000
Type
ZQV 16/2
20
20
1808250000
1808260000
ZHP S
ZHP S SO
3 mm
3 mm
20
20
1808290000
1808280000
ZEW 35
6 mm
20
ZAP ZDU 6 S
ZAP ZDU 6 S BL
SDIS SL 0.8X4.0X100
current
76 A
Qty.
25
Order No.
1739690000
ZAP ZDU10/16S
Width
2 mm
20
1739660000
9540000000
ZEW 35
6 mm
20
9540000000
1
1274670000
SDIS SL 1.0X4.5X125
1
1274680000
SSCH 10X3X1000 CU/SN
10 mm
1
0348900000
SSCH 10X3X1000 CU/SN
10 mm
1
0348900000
ZB 4K BL
ZB 16K BL
ZB 35K BL M6X16
6 mm
10 mm
14 mm
50
50
20
0475380000
0502880000
0502680000
ZB 4K BL
ZB 16K BL
ZB 35K BL M6X16
6 mm
10 mm
14 mm
50
50
20
0475380000
0502880000
0502680000
DEK 5/8 / WS 10/6
DEK 5/5
Note
C.74
1282250000 – 2012/2013
Installation terminals
ZNT 16/S
16 mm²
35 mm²
Two connections
12 x 95 x 50
76 / 25
1.5...25
NT
IEC 60947-7-1
IEC
400
76
16
ZNT 35
Terminals, Z-Series
Two connections
16 x 88.5 x 59
125 / 35
2.5...35
NT
C
IEC 60947-7-1
UL
CSA
600 (C)
300 (C)
58 (C)
65 (C)
AWG 14...4
AWG 14...4
6 kV / 3
A7 / V-0
IEC
400
125
35
UL
CSA
600 (C)
600 (C)
120 (C)
120 (C)
AWG 12...2
AWG 12...2
6 kV / 3
A8 / V-0
r{#i
r#a
The supply to the busbar is via a busbar connection (ZB 35, ZB 16 or ZF 4S).
The supply to the busbar is via a busbar connection (ZB 35, ZB 16 or ZF 4S).
Type
Type
Rated connection
1.5...16 / 16...25
1.5...16 / 1.5...16
18 / 1.0 x 5.5 mm
Rated connection
2.5...10 / 16...35
2.5...35 / 2.5...35
25 / 1.0 x 5.5 mm
Qty.
ZNT 16S
Order No.
1739600000
25
Qty.
ZNT 35
Order No.
1739640000
10
The distance from holding plate to holding plate should be 200 mm.
The distance from holding plate to holding plate should be 200 mm.
Type
ZQV 16/2
Type
current
76 A
Qty.
25
Order No.
1739690000
ZAP ZDU10/16S
Width
2 mm
20
1739660000
ZEW 35
6 mm
20
9540000000
ZEW 35
1
1274680000
SDIS SL 1.0X4.5X125
SDIS SL 1.0X4.5X125
current
Qty.
Order No.
Width
6 mm
20
9540000000
1
1274680000
SSCH 10X3X1000 CU/SN
10 mm
1
0348900000
SSCH 10X3X1000 CU/SN
10 mm
1
0348900000
ZB 4K BL
ZB 16K BL
ZB 35/M6X16
6 mm
10 mm
14 mm
50
50
20
0475380000
0502880000
0266500000
ZB 4K BL
ZB 16K BL
ZB 35K BL M6X16
6 mm
10 mm
14 mm
50
50
20
0475380000
0502880000
0502680000
DEK 5/5
DEK 5/5
Integrated end plate.
1282250000 – 2012/2013
C.75
Installation terminals
Terminals, Z-Series
ZDU 4 NT
N-cross-connections with busbar system 10 x 3 mm.
4 mm²
Modified busbar position
ZDU 10 NT
10 mm²
Modified busbar position
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
6.1 x 78.5 x 50.5
32 / 6
0.13...6
NT
IEC
250
32
4
V
A
mm²
NT
IEC 60947-7-1
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
10 x 86.5 x 50
57 / 16
1.5...16
UL
CSA
IEC
250
57
10
UL
4 kV / 3
A4 / V-0
mm²
mm²
mm/-
Note
CSA
4 kV / 3
A6 / V-0
#
#
The supply to the busbar is via a busbar connection (ZB 35, ZB 16 or ZF 4S).
The supply to the busbar is via a busbar connection (ZB 35, ZB 16 or ZF 4S).
Type
ZDU 4/NT DB
ZDU 4/NT
Type
Rated connection
0.5...6
0.5...4 / 0.5...4
12 / 0.6 x 3.5 mm
Rated connection
1.5...10 / 1.5...16
1.5...10 / 1.5...10
18 / 1.0 x 5.5 mm
Ordering data
Version
Dark beige Wemid
Blue Wemid
Note
Qty.
50
50
Order No.
1778080000
1757980000
Qty.
ZDU 10/NT
Order No.
1762420000
25
Use only in connection with ZDU 2.5, ZDU 2.5/3 AN, ZDU 4, ZDU 6 and their
PE variants.
Use only in connection with ZDU 2.5, ZDU 2.5/3 AN, ZDU 4, ZDU 6 and their
PE variants.
Type
current
Qty.
Order No.
Type
ZQV 10/2
ZAP ZDU4/NT
Width
1.5 mm
20
1757970000
ZHP ZDU4/NT SO
3 mm
20
ZEW 35
6 mm
Accessories
Pluggable cross-connection
End plate / Partition plate
2-pole
3-pole
4-pole
20-/24-pole
Dark beige Wemid
Blue Wemid
Support bracket for 10 x 3 (required every 20 cm)
Blue Wemid
For a vertical installation position
End bracket
Screwdriver
Busbar 10 x 3 (140 A)
Dark beige Wemid
Standard
OK, Busbar up to OK, TS35 = 25.5 mm
Clamping yoke for power supply to 10 x 3 busbars
Rigid / flexible 0.5 - 6 / 4 mm²
Rigid / flexible 6 - 16 mm²
Flexible 16 - 35 mm²
Identification systems
(see assortment in catalogue 7)
Marking tags
SDIS SL 0.6X3.5X100
current
17.5 A
Qty.
25
Order No.
1739680000
ZAP ZDU10/16S
Width
2 mm
20
1739660000
1803890000
ZHP ZDU4/NT SO
3 mm
20
1803890000
20
9540000000
ZEW 35
6 mm
20
9540000000
1
1274660000
SDIS SL 1.0X4.5X125
1
1274680000
SSCH 10X3X1000 CU/SN
10 mm
1
0348900000
SSCH 10X3X1000 CU/SN
10 mm
1
0348900000
ZB 4K BL
ZB 16K BL
ZB 35K BL M6X16
6 mm
10 mm
14 mm
50
50
20
0475380000
0502880000
0502680000
ZB 4K BL
ZB 16K BL
ZB 35K BL M6X16
6 mm
10 mm
14 mm
50
50
20
0475380000
0502880000
0502680000
DEK 5/5 / WS 15/5
WS 12/5 / DEK 5/6
Note
C.76
1282250000 – 2012/2013
Installation terminals
ZPE 2.5 S
2.5 mm²
Two connections
ZPE 4 S
4 mm²
Two connections
Terminals, Z-Series
N-cross-connections with busbar system 10 x 3 mm.
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 62.5 x 44
/4
0.5...4
PE
IEC
400
2.5
V
mm²
UL
CSA
IEC
400
4
6 kV / 3
A2 / V-0
Note
UL
C
CSA
6 kV / 3
A3 / V-0
#
mm²
mm²
mm/-
PE
IEC 60947-7-2
IEC 60947-7-2
Rated data
Rated voltage
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
6.1 x 65.5 x 46
/6
0.5...6
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
Rated connection
0.5...6
0.5...4 / 0.5...4
10 / 0.6 x 3.5 mm
The supply to the busbar is via a busbar connection (ZB 35, ZB 16 or ZF 4S).
The supply to the busbar is via a busbar connection (ZB 35, ZB 16 or ZF 4S).
Type
ZPE 2.5 S
Type
ZPE 4 S
Ordering data
Version
green/yellow Wemid
Note
Qty.
100
Order No.
1808330000
Qty.
100
Order No.
1808340000
The distance from holding plate to holding plate should be 200 mm.
The distance from holding plate to holding plate should be 200 mm.
Type
ZAP ZDU 2.5 S
Width
2 mm
Qty.
20
Order No.
1808030000
Type
ZAP ZDU 4 S
Width
2 mm
Qty.
20
Order No.
1808380000
ZHP S
ZHP S SO
3 mm
3 mm
20
20
1808290000
1808280000
ZHP S
ZHP S SO
3 mm
3 mm
20
20
1808290000
1808280000
ZEW 35
6 mm
20
9540000000
ZEW 35
6 mm
20
9540000000
1
1274660000
SDIS SL 0.6X3.5X100
1
1274660000
Accessories
End plate / Partition plate
Dark beige Wemid
Support bracket for 10 x 3 (required every 20 cm)
Blue Wemid
For a vertical installation position
End bracket
Screwdriver
Identification systems
Dark beige Wemid
Standard
SDIS SL 0.6X3.5X100
(see assortment in catalogue 7)
Marking tags
DEK 5/5 / WS 10/5
DEK 5/6 / WS 10/6
Note
1282250000 – 2012/2013
C.77
Installation terminals
Terminals, Z-Series
ZPE 6 S
N-cross-connections with busbar system 10 x 3 mm.
6 mm²
Two connections
ZPE 10/S
10 mm²
Two connections
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
8.1 x 65.5 x 50.09
/ 10
0.5...10
PE
V
mm²
IEC
400
6
UL
CSA
IEC
400
10
6 kV / 3
A5 / V-0
mm²
mm²
mm/-
Note
PE
IEC 60947-7-2
IEC 60947-7-2
Rated data
Rated voltage
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
10 x 86.5 x 48.5
/ 16
1.3...16
UL
CSA
AWG 16...6
AWG 16...6
6 kV / 3
A6 / V-0
r{i
Rated connection
0.5...10
0.5...10 / 0.5...6
12 / 0.6 x 3.5 mm
Rated connection
1.5...16 / 1.5...16
1.5...10 / 1.5...10
18 / 1.0 x 5.5 mm
The supply to the busbar is via a busbar connection (ZB 35, ZB 16 or ZF 4S).
The supply to the busbar is via a busbar connection (ZB 35, ZB 16 or ZF 4S).
Type
ZPE 6 S
Type
ZPE 10S
Ordering data
Version
green/yellow Wemid
Note
Qty.
100
Order No.
1808350000
Qty.
25
Order No.
1739570000
The distance from holding plate to holding plate should be 200 mm.
The distance from holding plate to holding plate should be 200 mm.
Type
ZAP ZDU 6 S
Width
2 mm
Qty.
20
Order No.
1808250000
Type
ZAP ZDU10/16S
Width
2 mm
Qty.
20
Order No.
1739660000
ZHP S
ZHP S SO
3 mm
3 mm
20
20
1808290000
1808280000
ZEW 35
6 mm
20
9540000000
ZEW 35
6 mm
20
9540000000
1
1274660000
SDIS SL 1.0X4.5X125
1
1274680000
Accessories
End plate / Partition plate
Dark beige Wemid
Support bracket for 10 x 3 (required every 20 cm)
Blue Wemid
For a vertical installation position
End bracket
Screwdriver
Identification systems
Dark beige Wemid
Standard
SDIS SL 0.6X3.5X100
(see assortment in catalogue 7)
Marking tags
DEK 5/8 / WS 10/6
DEK 5/5 / WS 10/5
Note
C.78
1282250000 – 2012/2013
Installation terminals
ZPE 16/S
16 mm²
Terminals, Z-Series
Two connections
12 x 95 x 48.5
/ 25
1.5...25
PE
C
IEC 60947-7-2
IEC
400
16
UL
CSA
AWG 14...4
AWG 14...4
6 kV / 3
A7 / V-0
r{i
Rated connection
1.5...16 / 16...25
1.5...16 / 1.5...16
18 / 1.0 x 5.5 mm
To ensure the current-carrying capacity of the mounting rail, it is necessary to
use the TS 35 x 15.
Type
ZPE 16S
Qty.
25
Order No.
1739610000
The distance from holding plate to holding plate should be 200 mm.
Type
ZAP ZDU10/16S
Width
2 mm
Qty.
20
Order No.
1739660000
ZEW 35
6 mm
20
9540000000
1
1274680000
SDIS SL 1.0X4.5X125
DEK 5/5
1282250000 – 2012/2013
C.79
Terminals, Z-Series
Overview WeiCoS
WeiCoS pluggable terminal block system
Connecting prefabricated functional units with speed and
versatility
Our pluggable terminal rails with tension-clamp connections enable you
to change functional units in the electrical cabinet quickly and simply.
C
Modular and flexible connection systems are especially in demand
where complete functional units have to be prefabricated or replaced.
Here WeiCoS (Weidmüller Connection System) – pluggable terminal
blocks – show their full strengths. Quickly mounted, fully factory testable
functional units which are faster and easier to replace.
Reliable connection
Terminal rails and plugs have tension-clamp
connections that separate the electrical and
mechanical functions from each other. The steel
tension clamps as well as the external plug
contacts ensure optimum contact forces; the
copper busbars, lower voltage drops.
C.80
1282250000 – 2012/2013
Solid interlock
All the connectors can be locked securely to the
base terminals using locking elements.
Terminals, Z-Series
Overview WeiCoS
C
Power supply
Power is supplied using standard Z-series
terminal blocks or with power supply terminals.
Simple operation
The parallel direction of wire entries and
screwdriver operating direction means that you
have a practical connection with the TOP
connection system for which no special tools
are needed. Test points are integrated.
1282250000 – 2012/2013
C.81
Terminals, Z-Series
Pluggable standard terminals WeiCoS
Feed-through terminals
ZT 2.5/2AN/1
WeiCoS – Pluggable terminal blocks for wire cross-sections
from 0.13 to 4 mm².
1 tension clamp connection / 1 pluggable connection
2.5 mm²
ZT 2.5/3AN/1
2.5 mm²
2 tension clamp connections / 1 pluggable connection
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 58 x 35
24 / 4
0.13...4
5.1 x 71.5 x 35
24 / 4
0.13...4
IEC 60947-7-1, IEC 61984
IEC 60947-7-1, IEC 61984
Rated data
Rated voltage
Max. voltage of clamp support & pluggable system
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
V
V
A
mm²
IEC
500
690
24
2.5
UL
300 (C)
Note
IEC
500
690
24
2.5
20 (C)
20 (C)
AWG 26...12
26...12
6 kV / 3
A2 / V-0
|{u#i
mm²
mm²
mm/-
CSA
300 (C)
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
Plug-in connection
0.5/ 0.5...
UL
300 (C)
CSA
300 (C)
20 (C)
20 (C)
AWG 26...12
26...12
6 kV / 3
A2 / V-0
|{u#i
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
Plug-in connection
0.5/ 0.5...
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller PZ
6/5 crimping tool. UL & CSA D = 600 V / 5 A.
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller PZ
6/5 crimping tool. UL & CSA D = 600 V / 5 A.
Type
ZT 2.5/2AN/1
Type
ZP 2.5/1AN/QV/1
ZP 2.5/1AN/QV/2
ZP 2.5/1AN/QV/3
ZP 2.5/1AN/QV/4
ZP 2.5/1AN/QV/5
ZP 2.5/1AN/QV/6
ZP 2.5/1AN/QV/7
ZP 2.5/1AN/QV/8
ZP 2.5/1AN/QV/9
ZP 2.5/1AN/QV/10
Order No.
1815070000
Order No.
1815190000
1815200000
1815210000
1815220000
1815230000
1815240000
1815250000
1815260000
1815270000
1815280000
Type
ZT 2.5/3AN/1
Type
ZP 2.5/1AN/QV/1
ZP 2.5/1AN/QV/2
ZP 2.5/1AN/QV/3
ZP 2.5/1AN/QV/4
ZP 2.5/1AN/QV/5
ZP 2.5/1AN/QV/6
ZP 2.5/1AN/QV/7
ZP 2.5/1AN/QV/8
ZP 2.5/1AN/QV/9
ZP 2.5/1AN/QV/10
Ordering data
Base terminal
Dark beige Wemid
Plug-in connector
1-pole
2-pole
3-pole
4-pole
5-pole
6-pole
7-pole
8-pole
9-pole
10-pole
Qty.
50
Qty.
50
25
25
25
25
25
25
20
20
20
Note
Qty.
50
Qty.
50
25
25
25
25
25
25
20
20
20
Order No.
1815090000
Order No.
1815190000
1815200000
1815210000
1815220000
1815230000
1815240000
1815250000
1815260000
1815270000
1815280000
Accessories
Pluggable cross-connection
End plate / Partition plate
Test adapter
Miscellaneous accessories WeiCoS
Screwdriver
Identification systems
Order No.
1693800000
1693810000
1693820000
1693880000
1909000000
Type
ZQV 2.5N/2 GE
ZQV 2.5N/3 GE
ZQV 2.5N/4 GE
ZQV 2.5N/10 GE
ZQV 2.5N/20 GE
Qty.
60
60
60
20
20
Order No.
1693800000
1693810000
1693820000
1693880000
1909000000
ZAP/TW ZT2.5/3AN
ZAP/TW ZT2.5/3AN OR
current
24 A
24 A
24 A
24 A
24 A
Width
2.5 mm
2.5 mm
50
50
1816030000
1816040000
50
50
1816050000
1816060000
Dark beige Wemid
Orange Wemid
ZAP/TW ZT2.5/2AN
ZAP/TW ZT2.5/2AN OR
Standard
With assembly peg
ZTA ZT2.5
ZTA ZT2.5/ZA
5.1 mm
5.1 mm
25
25
1827080000
1847600000
ZTA ZT2.5
ZTA ZT2.5/ZA
5.1 mm
5.1 mm
25
25
1827080000
1847600000
ZVR ZP2.5
KOSF ZT2.5
ZZE ZP2.5
3.9 mm
2.9 mm
9.9 mm
25
50
25
1816130000
1816150000
1816140000
ZVR ZP2.5
KOSF ZT2.5
ZZE ZP2.5
3.9 mm
2.9 mm
9.9 mm
25
50
25
1816130000
1816150000
1816140000
1
1274660000
SDIS SL 0.6X3.5X100
1
1274660000
Locking element
Coding element
Strain relief
Type
ZQV 2.5N/2 GE
ZQV 2.5N/3 GE
ZQV 2.5N/4 GE
ZQV 2.5N/10 GE
ZQV 2.5N/20 GE
Qty.
60
60
60
20
20
current
24 A
24 A
24 A
24 A
24 A
Width
2.5 mm
2.5 mm
2-pole
3-pole
4-pole
10-pole
20-/24-pole
Standard
SDIS SL 0.6X3.5X100
(see assortment in catalogue 7)
Marking tags
DEK 5/6 / WS 10/5
DEK 5/5 / WS 10/5
Note
C.82
1282250000 – 2012/2013
Pluggable standard terminals WeiCoS
2.5 mm²
2 tension clamp connections / 2 pluggable connections
5.1 x 93 x 35
24 / 4
0.13...4
2.5 mm²
4 pluggable connections
UL
300 (C)
IEC
500
690
24
2.5
20 (C)
20 (C)
AWG 26...12
26...12
6 kV / 3
A2 / V-0
|{u#i
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
Plug-in connection
0.5/ 0.5...
2.5 mm²
5.1 x 85.5 x 35
24 /
...
IEC 60947-7-1, IEC 61984
CSA
300 (C)
ZT 2.5/2x2AN
2 x 2 connections
5.1 x 85.5 x 35
24 /
...
IEC 60947-7-1, IEC 61984
IEC
500
690
24
2.5
ZT 2.5/4AN/4
Terminals, Z-Series
ZT 2.5/4AN/2
UL
300 (C)
IEC
500
690
24
2.5
20 (C)
20 (C)
AWG 26...12
26...12
6 kV / 3
/ V-0
|{u#i
Rated connection
0.5...4
0.5...4 / 0.5...2.5
/ 0.6 x 3.5 mm
C
IEC 60947-7-1, IEC 61984
CSA
300 (C)
UL
CSA
6 kV / 3
/ V-0
Plug-in connection
0.5/ 0.5...
#
Rated connection
0.5...4
0.5...4 / 0.5...2.5
/ 0.6 x 3.5 mm
Plug-in connection
0.5/ 0.5...
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller PZ
6/5 crimping tool. UL & CSA D = 600 V / 5 A.
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller PZ
6/5 crimping tool. UL & CSA D = 600 V / 5 A.
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller PZ
6/5 crimping tool. UL & CSA D = 600 V / 5 A.
Type
ZT 2.5/4AN/2
Type
ZP 2.5/1AN/QV/1
ZP 2.5/1AN/QV/2
ZP 2.5/1AN/QV/3
ZP 2.5/1AN/QV/4
ZP 2.5/1AN/QV/5
ZP 2.5/1AN/QV/6
ZP 2.5/1AN/QV/7
ZP 2.5/1AN/QV/8
ZP 2.5/1AN/QV/9
ZP 2.5/1AN/QV/10
Order No.
1815110000
Order No.
1815190000
1815200000
1815210000
1815220000
1815230000
1815240000
1815250000
1815260000
1815270000
1815280000
Type
ZT 2.5/4AN/4
Type
ZP 2.5/1AN/1
ZP 2.5/1AN/2
ZP 2.5/1AN/3
ZP 2.5/1AN/4
ZP 2.5/1AN/5
ZP 2.5/1AN/6
ZP 2.5/1AN/7
ZP 2.5/1AN/8
ZP 2.5/1AN/9
ZP 2.5/1AN/10
Order No.
1815130000
Order No.
1815430000
1815440000
1815450000
1815500000
1815510000
1815520000
1815530000
1815540000
1815550000
1815560000
Type
ZT 2.5/2X2AN
Type
ZP 2.5/1AN/1
ZP 2.5/1AN/2
ZP 2.5/1AN/3
ZP 2.5/1AN/4
ZP 2.5/1AN/5
ZP 2.5/1AN/6
ZP 2.5/1AN/7
ZP 2.5/1AN/8
ZP 2.5/1AN/9
ZP 2.5/1AN/10
Type
ZQV 2.5N/2 GE
ZQV 2.5N/3 GE
ZQV 2.5N/4 GE
ZQV 2.5N/10 GE
ZQV 2.5N/20 GE
Qty.
50
Qty.
50
25
25
25
25
25
25
20
20
20
Qty.
60
60
60
20
20
Order No.
1693800000
1693810000
1693820000
1693880000
1909000000
Type
ZQV 2.5N/2 GE
ZQV 2.5N/3 GE
ZQV 2.5N/4 GE
ZQV 2.5N/10 GE
ZQV 2.5N/20 GE
ZAP/TW ZT2.5/4AN/2
ZAP/TW ZT2.5/4AN/2 OR
current
24 A
24 A
24 A
24 A
24 A
Width
2.5 mm
2.5 mm
50
50
1816070000
1816080000
ZTA ZT2.5
ZTA ZT2.5/ZA
5.1 mm
5.1 mm
25
25
ZVR ZP2.5
KOSF ZT2.5
ZZE ZP2.5
3.9 mm
2.9 mm
9.9 mm
SDIS SL 0.6X3.5X100
DEK 5/5 / WS 10/5
1282250000 – 2012/2013
Qty.
50
Qty.
50
25
25
25
25
25
25
20
20
20
Qty.
60
60
60
20
20
Order No.
1693800000
1693810000
1693820000
1693880000
1909000000
Type
ZQV 2.5N/2 GE
ZQV 2.5N/3 GE
ZQV 2.5N/4 GE
ZQV 2.5N/10 GE
ZQV 2.5N/20 GE
ZAP/TW ZT2.5/4AN/4
current
24 A
24 A
24 A
24 A
24 A
Width
2.5 mm
50
1816090000
1827080000
1847600000
ZTA ZT2.5
ZTA ZT2.5/ZA
5.1 mm
5.1 mm
25
25
25
50
25
1816130000
1816150000
1816140000
ZVR ZP2.5
KOSF ZT2.5
ZZE ZP2.5
3.9 mm
2.9 mm
9.9 mm
1
1274660000
SDIS SL 0.6X3.5X100
DEK 5/5 / WS 10/5
Qty.
50
Qty.
50
25
25
25
25
25
25
20
20
20
Order No.
1967200000
Order No.
1815430000
1815440000
1815450000
1815500000
1815510000
1815520000
1815530000
1815540000
1815550000
1815560000
Qty.
60
60
60
20
20
Order No.
1693800000
1693810000
1693820000
1693880000
1909000000
ZAP/TW ZT2.5/4AN/4
current
24 A
24 A
24 A
24 A
24 A
Width
2.5 mm
50
1816090000
1827080000
1847600000
ZTA ZT2.5
ZTA ZT2.5/ZA
5.1 mm
5.1 mm
25
25
1827080000
1847600000
25
50
25
1816130000
1816150000
1816140000
ZVR ZP2.5
KOSF ZT2.5
ZZE ZP2.5
3.9 mm
2.9 mm
9.9 mm
25
50
25
1816130000
1816150000
1816140000
1
1274660000
SDIS SL 0.6X3.5X100
1
1274660000
DEK 5/5 / WS 10/5
C.83
Pluggable standard terminals WeiCoS
ZTC 2.5/4AN/4
Feed-through terminals
2.5 mm²
Terminals, Z-Series
4 pluggable connections
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
5.1 x 85.5 x 35
/ 2.5
0.5...2.5
Technical data
Rated data
Rated voltage
Max. voltage of clamp support & pluggable system
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
V
V
A
mm²
IEC
250
UL
CSA
24
2.5
4 kV / 2
/ V-0
mm²
mm²
mm/-
Rated connection
Plug-in connection
0.5...2.5
/
Note
Ordering data
Base terminal
Dark beige Wemid
Plug-in connector
1-pole
2-pole
3-pole
4-pole
5-pole
6-pole
7-pole
8-pole
9-pole
10-pole
Type
ZTC 2.5/4AN/4
Type
STGH ZPC2.5 DB
Qty.
50
Qty.
50
Order No.
1898450000
Order No.
2321640000
Note
Accessories
Pluggable cross-connection
2-pole
3-pole
4-pole
10-pole
20-/24-pole
End plate / Partition plate
Dark beige Wemid
Orange Wemid
Test adapter
Miscellaneous accessories WeiCoS
Screwdriver
Identification systems
Type
ZQV 2.5N/2 GE
ZQV 2.5N/3 GE
ZQV 2.5N/4 GE
ZQV 2.5N/10 GE
ZQV 2.5N/20 GE
ZAP/TW ZT2.5/4AN/4
current
24 A
24 A
24 A
24 A
24 A
Width
2.5 mm
Qty.
60
60
60
20
20
Order No.
1693800000
1693810000
1693820000
1693880000
1909000000
50
1816090000
Standard
With assembly peg
Locking element
Coding element
Strain relief
Standard
(see assortment in catalogue 7)
Marking tags
DEK 5/5 / WS 10/5
Note
C.84
1282250000 – 2012/2013
Pluggable standard terminals WeiCoS
4 mm²
1 tension clamp connection / 1 pluggable connection
ZT 4/4AN/2
4 mm²
2 tension clamp connections / 2 pluggable connections
Terminals, Z-Series
ZT 4/2AN/1
Feed-through terminals
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
6.5 x 58 x 43.5
32 / 6
0.13...6
6.5 x 100.5 x 43.5
32 / 6
0.13...6
V
V
A
mm²
IEC
800
800
32
4
UL
600 (C)
mm²
mm²
mm/-
Note
CSA
600 (C)
IEC
800
800
32
4
28 (C)
28 (C)
AWG 26...10
AWG 26...10
8 kV / 3
A3 / V-0
r{#
Rated connection
0.5...6
0.5...6 / 0.5...4
12 / 0.6 x 3.5 mm
C
IEC 60947-7-1, IEC 61984
IEC 60947-7-1, IEC 61984
Rated data
Rated voltage
Max. voltage of clamp support & pluggable system
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
Plug-in connection
0.5/ 0.5...
CSA current and voltage, acc. to Gr. C
UL
600 (C)
CSA
600 (C)
28 (C)
28 (C)
AWG 26...10
AWG 26...10
8 kV / 3
A3 / V-0
r{#
Rated connection
0.5...6
0.5...6 / 0.5...4
12 / 0.6 x 3.5 mm
Plug-in connection
0.5/ 0.5...
CSA current and voltage, acc. to Gr. C
Ordering data
Base terminal
Dark beige Wemid
Plug-in connector
1-pole
2-pole
3-pole
4-pole
5-pole
6-pole
7-pole
8-pole
9-pole
10-pole
Type
ZT 4/2AN/1
Type
ZP 4/1AN/1
ZP 4/1AN/2
ZP 4/1AN/3
ZP 4/1AN/4
ZP 4/1AN/5
ZP 4/1AN/6
ZP 4/1AN/7
ZP 4/1AN/8
ZP 4/1AN/9
ZP 4/1AN/10
Qty.
50
Qty.
50
25
25
25
20
20
20
20
10
10
Note
Order No.
1854960000
Order No.
1848340000
1854990000
1855000000
1855010000
1855020000
1855030000
1855040000
1855050000
1855060000
1855070000
Type
ZT 4/4AN/2
Type
ZP 4/1AN/1
ZP 4/1AN/2
ZP 4/1AN/3
ZP 4/1AN/4
ZP 4/1AN/5
ZP 4/1AN/6
ZP 4/1AN/7
ZP 4/1AN/8
ZP 4/1AN/9
ZP 4/1AN/10
Type
ZQV 4/2 GE
Qty.
50
Qty.
50
25
25
25
20
20
20
20
10
10
Order No.
1848350000
Order No.
1848340000
1854990000
1855000000
1855010000
1855020000
1855030000
1855040000
1855050000
1855060000
1855070000
Accessories
Pluggable cross-connection
2-pole
3-pole
4-pole
10-pole
20-/24-pole
End plate / Partition plate
Dark beige Wemid
Orange Wemid
Test adapter
Miscellaneous accessories WeiCoS
Screwdriver
Identification systems
Type
ZQV 4/2 GE
current
32 A
Qty.
60
Order No.
1608950000
ZAP/TW ZT4/2AN
ZAP/TW ZT4/2AN OR
Width
3.25 mm
3.25 mm
50
50
1855220000
1855230000
ZAP/TW ZT4/4AN/2 OR
ZVR ZP4
KOSF ZT4
ZZE ZP4
5.5 mm
5.4 mm
12.5 mm
25
50
25
1855250000
1856860000
1855260000
ZVR ZP4
KOSF ZT4
ZZE ZP4
1
1274660000
SDIS SL 0.6X3.5X100
current
32 A
Qty.
60
Order No.
1608950000
3.25 mm
50
1855240000
5.5 mm
5.4 mm
12.5 mm
25
50
25
1855250000
1856860000
1855260000
1
1274660000
Width
Standard
With assembly peg
Locking element
Coding element
Strain relief
Standard
SDIS SL 0.6X3.5X100
(see assortment in catalogue 7)
Marking tags
DEK 5/6 / WS 10/6
DEK 5/6 / WS 10/6
Note
1282250000 – 2012/2013
C.85
Terminals, Z-Series
Pluggable standard terminals WeiCoS
Modular PE terminals
ZTPE 2.5/2AN/1
WeiCoS – Pluggable terminal blocks for wire cross-sections
from 0.13 to 4 mm².
1 tension clamp connection / 1 pluggable connection
2.5 mm²
ZTPE 2.5/3AN/1
2.5 mm²
2 tension clamp connections / 1 pluggable connection
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 58 x 35
/4
0.13...4
PE
mm²
V
V
kV
IEC
2.5
690
500
UL
AWG 26...12
Note
CSA
26...12
IEC
2.5
690
500
UL
AWG 26...12
6
300 A (2.5 mm²)
3
A2 / V-0
|{ui
mm²
mm²
mm/-
PE
IEC 60947-7-2
IEC 60947-7-2
Rated data
Rated cross-section
Max. voltage of clamp support & pluggable system
Rated voltage to adjoining terminal
Rated impulse withstand voltage to adjacent terminal
Rated short-time current
Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
5.1 x 71.5 x 35
/4
0.13...4
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
CSA
26...12
6
300 A (2.5 mm²)
3
A2 / V-0
Plug-in connection
0.5/ 0.5...2.5
|{ui
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
Plug-in connection
0.5/ 0.5...2.5
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller PZ
6/5 crimping tool. UL & CSA D = 600 V / 5 A
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller PZ
6/5 crimping tool. UL & CSA D = 600 V / 5 A
Type
ZTPE 2.5/2AN/1
Type
ZP 2.5/1AN/QV/1 GN
Order No.
1815080000
Order No.
1820570000
Type
ZTPE 2.5/3AN/1
Type
ZP 2.5/1AN/QV/1 GN
Ordering data
Base terminal
green/yellow Wemid
Plug-in connector
1-pole
Qty.
50
Qty.
50
Note
Qty.
50
Qty.
50
Order No.
1815100000
Order No.
1820570000
Accessories
End plate / Partition plate
Test adapter
Miscellaneous accessories WeiCoS
Screwdriver
Identification systems
Dark beige Wemid
Orange Wemid
Type
ZAP/TW ZT2.5/2AN
ZAP/TW ZT2.5/2AN OR
Width
2.5 mm
2.5 mm
Qty.
50
50
Order No.
1816030000
1816040000
Type
ZAP/TW ZT2.5/3AN
ZAP/TW ZT2.5/3AN OR
Width
2.5 mm
2.5 mm
Qty.
50
50
Order No.
1816050000
1816060000
Standard
With assembly peg
ZTA ZT2.5
ZTA ZT2.5/ZA
5.1 mm
5.1 mm
25
25
1827080000
1847600000
ZTA ZT2.5
ZTA ZT2.5/ZA
5.1 mm
5.1 mm
25
25
1827080000
1847600000
ZVR ZP2.5
KOSF ZT2.5
ZZE ZP2.5
3.9 mm
2.9 mm
9.9 mm
25
50
25
1816130000
1816150000
1816140000
ZVR ZP2.5
KOSF ZT2.5
ZZE ZP2.5
3.9 mm
2.9 mm
9.9 mm
25
50
25
1816130000
1816150000
1816140000
1
1274660000
SDIS SL 0.6X3.5X100
1
1274660000
Locking element
Coding element
Strain relief
Standard
SDIS SL 0.6X3.5X100
(see assortment in catalogue 7)
Marking tags
DEK 5/5 / WS 10/5
DEK 5/5 / WS 10/5
Note
C.86
1282250000 – 2012/2013
Pluggable standard terminals WeiCoS
2.5 mm²
2 tension clamp connections / 2 pluggable connections
5.1 x 93 x 35
/4
0.13...4
PE
IEC 60947-7-2
IEC
2.5
690
500
ZTPE 2.5/4AN/4
2.5 mm²
4 pluggable connections
ZTCPE 2.5/4AN/4
2.5 mm²
4 pluggable connections
5.1 x 85.5 x 35
/4
0.13...4
PE
Terminals, Z-Series
ZTPE 2.5/4AN/2
5.1 x 85.5 x 35
/ 2.5
0.5...2.5
PE
IEC 60947-7-2
UL
AWG 26...12
CSA
26...12
IEC
2.5
690
500
UL
AWG 26...12
6
300 A (2.5 mm²)
3
A2 / V-0
|{ui
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
CSA
26...12
IEC
2.5
Plug-in connection
0.5/ 0.5...2.5
|{ui
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
Plug-in connection
Rated connection
0.5/ 0.5...2.5
0.5...2.5
/
Type
ZTPE 2.5/4AN/2
Type
ZP 2.5/1AN/QV/1 GN
Order No.
1815120000
Order No.
1820570000
Type
ZTPE 2.5/4AN/4
Type
ZP 2.5/1AN/QV/1 GN
Qty.
50
Qty.
50
Order No.
1815140000
Order No.
1820570000
Type
ZTCPE 2.5/4AN/4
Type
STGH ZPC2.5 DB
Type
ZAP/TW ZT2.5/4AN/4
Type
ZAP/TW ZT2.5/4AN/2
ZAP/TW ZT2.5/4AN/2 OR
Width
2.5 mm
2.5 mm
Qty.
50
50
Order No.
1816070000
1816080000
Type
ZAP/TW ZT2.5/4AN/4
Width
2.5 mm
Qty.
50
Order No.
1816090000
ZTA ZT2.5
ZTA ZT2.5/ZA
5.1 mm
5.1 mm
25
25
1827080000
1847600000
ZTA ZT2.5
ZTA ZT2.5/ZA
5.1 mm
5.1 mm
25
25
1827080000
1847600000
ZVR ZP2.5
KOSF ZT2.5
ZZE ZP2.5
3.9 mm
2.9 mm
9.9 mm
25
50
25
1816130000
1816150000
1816140000
ZVR ZP2.5
KOSF ZT2.5
ZZE ZP2.5
3.9 mm
2.9 mm
9.9 mm
25
50
25
1816130000
1816150000
1816140000
1
1274660000
SDIS SL 0.6X3.5X100
1
1274660000
DEK 5/5 / WS 10/5
1282250000 – 2012/2013
DEK 5/5 / WS 10/5
C
4
300 A (2.5 mm²)
2
/ V-0
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller PZ
6/5 crimping tool. UL & CSA D = 600 V / 5 A
Qty.
50
Qty.
50
CSA
250
6
300 A (2.5 mm²)
3
A2 / V-0
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller PZ
6/5 crimping tool. UL & CSA D = 600 V / 5 A
SDIS SL 0.6X3.5X100
UL
Plug-in connection
Qty.
50
Qty.
50
Width
2.5 mm
Qty.
50
Order No.
1898480000
Order No.
2321640000
Order No.
1816090000
DEK 5/5 / WS 10/5
C.87
Pluggable standard terminals WeiCoS
ZTPE 4/2AN/1
Modular PE terminals
4 mm²
Terminals, Z-Series
1 tension clamp connection / 1 pluggable connection
ZTPE 4/4AN/2
4 mm²
2 tension clamp connections / 2 pluggable connections
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
6.5 x 58 x 43.5
/6
0.13...6
6.5 x 100.5 x 43.5
/6
0.13...6
PE
PE
Technical data
Rated data
Rated cross-section
Max. voltage of clamp support & pluggable system
Rated voltage to adjoining terminal
Rated impulse withstand voltage to adjacent terminal
Rated short-time current
Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
mm²
V
V
kV
IEC
4
800
800
UL
AWG 26...10
IEC
4
800
800
UL
AWG 26...10
8
480 A (4 mm²)
3
A3 / V-0
r{
mm²
mm²
mm/-
CSA
AWG 26...10
Rated connection
0.5...6
0.5...6 / 0.5...4
12 / 0.6 x 3.5 mm
CSA
AWG 26...10
8
480 A (4 mm²)
3
A3 / V-0
Plug-in connection
/ 0.5...4
r{
Rated connection
0.5...6
0.5...6 / 0.5...4
12 / 0.6 x 3.5 mm
Plug-in connection
/ 0.5...4
Note
Ordering data
Base terminal
1-pole
Type
ZTPE 4/2AN/1
Type
ZP 2.5/1AN/QV/1 GN
Dark beige Wemid
Orange Wemid
Type
ZAP/TW ZT4/2AN
ZAP/TW ZT4/2AN OR
Width
3.25 mm
3.25 mm
Qty.
50
50
Order No.
1855220000
1855230000
Type
ZVR ZP4
KOSF ZT4
ZZE ZP4
5.5 mm
5.4 mm
12.5 mm
25
50
25
1
green/yellow Wemid
Plug-in connector
Qty.
50
Qty.
50
Note
Order No.
1854970000
Order No.
1820570000
Type
ZTPE 4/4AN/2
Type
ZP 2.5/1AN/QV/1 GN
Qty.
50
Qty.
50
Order No.
1848330000
Order No.
1820570000
Accessories
End plate / Partition plate
Test adapter
Miscellaneous accessories WeiCoS
Screwdriver
Identification systems
Width
Qty.
Order No.
ZAP/TW ZT4/4AN/2 OR
3.25 mm
50
1855240000
1855250000
1856860000
1855260000
ZVR ZP4
KOSF ZT4
ZZE ZP4
5.5 mm
5.4 mm
12.5 mm
25
50
25
1855250000
1856860000
1855260000
1274660000
SDIS SL 0.6X3.5X100
1
1274660000
Standard
With assembly peg
Locking element
Coding element
Strain relief
Standard
SDIS SL 0.6X3.5X100
(see assortment in catalogue 7)
Marking tags
DEK 5/6 / WS 10/6
DEK 5/6 / WS 10/6
Note
C.88
1282250000 – 2012/2013
Terminals, Z-Series
C
1282250000 – 2012/2013
C.89
Terminals, Z-Series
Pluggable standard terminals WeiCoS
Two-tier modular terminals
ZDT 2.5/2
WeiCoS – Pluggable terminal blocks for wire cross-sections
from 0.13 to 4 mm².
Two potentials feasible
2.5 mm²
ZDT 2.5/8AN/4
2.5 mm²
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 80.5 x 52.5
24 / 4
0.13...4
5.2 x 145 x 52.5
/4
0.5...4
IEC 60947-7-1, IEC 61984
Rated data
Rated voltage
Max. voltage of clamp support & pluggable system
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
V
V
A
mm²
IEC
500
690
24
2.5
UL
300 (C)
CSA
300 (C)
IEC
500
20 (C)
20 (C)
AWG 26...12
26...12
6 kV / 3
A2 / V-0
24
2.5
|{u#i
mm²
mm²
mm/-
Note
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
UL
CSA
6 kV / 3
A2 / V-0
Plug-in connection
0.5/ 0.5...2.5
Rated connection
0.5...4 / 0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
Plug-in connection
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
Ordering data
Base terminal
Dark beige Wemid
Plug-in connector
1-pole
2-pole
3-pole
4-pole
5-pole
6-pole
7-pole
8-pole
9-pole
10-pole
Type
ZDT 2.5/2
Type
ZP 2.5/1AN/QV/1
ZP 2.5/1AN/QV/2
ZP 2.5/1AN/QV/3
ZP 2.5/1AN/QV/4
ZP 2.5/1AN/QV/5
ZP 2.5/1AN/QV/6
ZP 2.5/1AN/QV/7
ZP 2.5/1AN/QV/8
ZP 2.5/1AN/QV/9
ZP 2.5/1AN/QV/10
Qty.
50
Qty.
50
25
25
25
25
25
25
20
20
20
Note
Order No.
1815150000
Order No.
1815190000
1815200000
1815210000
1815220000
1815230000
1815240000
1815250000
1815260000
1815270000
1815280000
Type
ZDT 2.5/8AN/4
Type
ZP 2.5/1AN/QV/1
ZP 2.5/1AN/QV/2
ZP 2.5/1AN/QV/3
ZP 2.5/1AN/QV/4
ZP 2.5/1AN/QV/5
ZP 2.5/1AN/QV/6
ZP 2.5/1AN/QV/7
ZP 2.5/1AN/QV/8
ZP 2.5/1AN/QV/9
ZP 2.5/1AN/QV/10
Qty.
50
Qty.
50
25
25
25
25
25
25
20
20
20
Order No.
1259120000
Order No.
1815190000
1815200000
1815210000
1815220000
1815230000
1815240000
1815250000
1815260000
1815270000
1815280000
Accessories
Pluggable cross-connection
End plate / Partition plate
Test adapter
Miscellaneous accessories WeiCoS
Screwdriver
Identification systems
Order No.
1693800000
1693810000
1693820000
1693880000
1909000000
Type
ZQV 2.5N/2 GE
ZQV 2.5N/3 GE
ZQV 2.5N/4 GE
ZQV 2.5N/10 GE
ZQV 2.5N/20 GE
Qty.
60
60
60
20
20
Order No.
1693800000
1693810000
1693820000
1693880000
1909000000
ZAP/TW ZDT2.5/2
current
24 A
24 A
24 A
24 A
24 A
Width
2.5 mm
50
1816110000
50
1816110000
Dark beige Wemid
ZAP/TW ZDT2.5/2
Standard
With assembly peg
ZTA ZT2.5
ZTA ZT2.5/ZA
5.1 mm
5.1 mm
25
25
1827080000
1847600000
ZTA ZT2.5
ZTA ZT2.5/ZA
5.1 mm
5.1 mm
25
25
1827080000
1847600000
ZVR ZP2.5
KOSF ZT2.5
ZZE ZP2.5
3.9 mm
2.9 mm
9.9 mm
25
50
25
1816130000
1816150000
1816140000
ZVR ZP2.5
KOSF ZT2.5
ZZE ZP2.5
3.9 mm
2.9 mm
9.9 mm
25
50
25
1816130000
1816150000
1816140000
1
1274660000
SDIS SL 0.6X3.5X100
1
1274660000
Locking element
Coding element
Strain relief
Standard
(see assortment in catalogue 7)
Marking tags
Type
ZQV 2.5N/2 GE
ZQV 2.5N/3 GE
ZQV 2.5N/4 GE
ZQV 2.5N/10 GE
ZQV 2.5N/20 GE
Qty.
60
60
60
20
20
current
24 A
24 A
24 A
24 A
24 A
Width
2.5 mm
2-pole
3-pole
4-pole
10-pole
20-/24-pole
SDIS SL 0.6X3.5X100
DEK 5/5
DEK 5/5
Note
C.90
1282250000 – 2012/2013
Pluggable standard terminals WeiCoS
ZDT 2.5/2 DU-PE
2.5 mm²
Terminals, Z-Series
Phase - PE conductor
5.1 x 80.5 x 52.5
24 / 4
0.13...4
PE
IEC 60947-7-1 (-7-2), IEC 61984
IEC
500
690
24
2.5
UL
300 (C)
CSA
300 (C)
C
20 (C)
20 (C)
AWG 26...12
26...12
6 kV / 3
A2 / V-0
|{u#i
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
Plug-in connection
0.5/ 0.5...2.5
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
Type
ZDT 2.5/2 DU-PE
Type
ZP 2.5/1AN/QV/1
ZP 2.5/1AN/QV/2
ZP 2.5/1AN/QV/3
ZP 2.5/1AN/QV/4
ZP 2.5/1AN/QV/5
ZP 2.5/1AN/QV/6
ZP 2.5/1AN/QV/7
ZP 2.5/1AN/QV/8
ZP 2.5/1AN/QV/9
ZP 2.5/1AN/QV/10
Type
ZQV 2.5N/2 GE
ZQV 2.5N/3 GE
ZQV 2.5N/4 GE
ZQV 2.5N/10 GE
ZQV 2.5N/20 GE
Qty.
50
Qty.
50
25
25
25
25
25
25
20
20
20
Order No.
1815160000
Order No.
1815190000
1815200000
1815210000
1815220000
1815230000
1815240000
1815250000
1815260000
1815270000
1815280000
Qty.
60
60
60
20
20
Order No.
1693800000
1693810000
1693820000
1693880000
1909000000
ZAP/TW ZDT2.5/2
current
24 A
24 A
24 A
24 A
24 A
Width
2.5 mm
50
1816110000
ZTA ZT2.5
ZTA ZT2.5/ZA
5.1 mm
5.1 mm
25
25
1827080000
1847600000
ZVR ZP2.5
KOSF ZT2.5
ZZE ZP2.5
3.9 mm
2.9 mm
9.9 mm
25
50
25
1816130000
1816150000
1816140000
1
1274660000
SDIS SL 0.6X3.5X100
DEK 5/5
1282250000 – 2012/2013
C.91
Terminals, Z-Series
Pluggable standard terminals WeiCoS
Two-tier modular terminals
ZDT 2.5/2 PE
WeiCoS – Pluggable terminal blocks for wire cross-sections
from 0.13 to 4 mm².
2 tension clamp connections / 2 pluggable connections
2.5 mm²
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 80.5 x 52.5
/4
0.13...4
PE
IEC 60947-7-2
Rated data
Rated cross-section
Max. voltage of clamp support & pluggable system
Rated voltage to adjoining terminal
Rated impulse withstand voltage to adjacent terminal
Rated short-time current
Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
mm²
V
V
kV
IEC
2.5
690
500
UL
AWG 26...12
6
300 A (2.5 mm²)
3
A2 / V-0
|{u#i
mm²
mm²
mm/-
Note
CSA
26...12
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
Plug-in connection
0.52.5
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
Ordering data
Version
green/yellow Wemid
Plug-in connector
1-pole
Type
ZDT 2.5/2 PE
Type
ZP 2.5/1AN/QV/1 GN
Qty.
50
Qty.
50
Order No.
1815170000
Order No.
1820570000
Note
Accessories
End plate / Partition plate
Test adapter
Miscellaneous accessories WeiCoS
Screwdriver
Identification systems
Dark beige Wemid
Type
ZAP/TW ZDT2.5/2
Width
2.5 mm
Qty.
50
Order No.
1816110000
Standard
With assembly peg
ZTA ZT2.5
ZTA ZT2.5/ZA
5.1 mm
5.1 mm
25
25
1827080000
1847600000
ZVR ZP2.5
KOSF ZT2.5
ZZE ZP2.5
3.9 mm
2.9 mm
9.9 mm
25
50
25
1816130000
1816150000
1816140000
1
1274660000
Locking element
Coding element
Strain relief
Standard
SDIS SL 0.6X3.5X100
(see assortment in catalogue 7)
Marking tags
DEK 5/5 / WS 10/5
Note
C.92
1282250000 – 2012/2013
Pluggable standard terminals WeiCoS
2.5 mm²
2 tension clamp connections / 1 pluggable connection
Terminals, Z-Series
ZTTR 2.5
Test-disconnect terminals
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 87 x 36.5
18 / 4
0.13...4
C
IEC 60947-7-1, IEC 61984
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
IEC
400
16
2.5
V
A
mm²
UL
CSA
600 (C)
300 (B)
16 (C)
16 (B)
AWG 26...12
AWG 26...12
6 kV / 3
A2 / V-0
r{
mm²
mm²
mm/-
Note
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
CSA current and voltage, acc. to Gr. B
Ordering data
Version
Dark beige Wemid
Without isolator, Dark beige Wemid
Note
Type
ZTTR 2.5
ZTTR 2.5 O.TNHE
Qty.
50
50
Order No.
1865510000
1905470000
Please contact customer support when planning your installation with SIHA.
Accessories
Pluggable cross-connection
2-pole
3-pole
4-pole
10-pole
End plate / Partition plate
End bracket
Screwdriver
Testing / Checking
Holder for cartridge fuse 5 x 20mm
Module connector (max, 250 V)
Disconnect plug
Dark beige Wemid
ZAP/TW ZTTR2.5
Dark beige Wemid
ZEW 35
Standard
SDIS SL 0.6X3.5X100
Test plug
PS 2.3 RT
400 V AC/DC, without LED
10 - 36 V AC/DC, red LED
140 - 250 V AC/DC, red LED
without fittings
with wire jumper
With 1N4007 diode
removable, as replacement for release lever
Identification systems
Note
1282250000 – 2012/2013
Type
ZQV 2.5N/2 GE
ZQV 2.5N/3 GE
ZQV 2.5N/4 GE
ZQV 2.5N/10 GE
(see assortment in catalogue 7)
Marking tags
SIHA 3/G20
SIHA 3/G20/LD 10-36V
SIHA 3/G20/LD 140-250V
BEST
BEST/DRBR
BEST/D
TNST
current
24 A
24 A
24 A
24 A
Width
2.5 mm
Qty.
60
60
60
20
Order No.
1693800000
1693810000
1693820000
1693880000
50
1865520000
6 mm
20
9540000000
1
1274660000
5.4 mm
20
0180400000
5.95 mm
5.95 mm
5.95 mm
25
25
25
7921560000
7921570000
7921600000
5.1 mm
5.1 mm
5.1 mm
50
50
50
1833100000
1878570000
1878560000
50
1833090000
DEK 5/5
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
C.93
Terminals, Z-Series
Pluggable standard terminals WeiCoS
Feed-through modular terminals
ZRV 1.5
Z-series standard ranges provide solutions for conductor
cross-sections from 0.05 to 35 mm².
Base terminal - plug
1.5 mm²
ZRV 1,5/PE
Base terminal - plug
1.5 mm²
5.1 x 89.5 x 52.5
/ 2.5
0.13...2.5
5.1 x 89.5 x 52.5
/ 2.5
0.13...2.5
IEC 60947-7-1, IEC 61984
IEC 60947-7-1 (-7-2), IEC 61984
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
IEC
63
4
1.5
V
A
mm²
UL
CSA
150 (C)
10 (C)
AWG 26...14
1.5 kV / 3
A1 / V-0
#a
mm²
mm²
mm/-
Rated connection
0.5...2.5
0.5...2.5 / 0.5...1.5
8 / 0.6 x 3.5 mm
IEC
63
4
1.5
Crimp connection
0.5...2.5
UL
CSA
150 (C)
10 (C)
AWG 26...14
1.5 kV / 3
A1 / V-0
#a
Rated connection
0.5...2.5
0.5...2.5 / 0.5...1.5
8 / 0.6 x 3.5 mm
Crimp connection
0.5...2.5
Note
Ordering data
Version
Base terminal
Type
ZRV 1.5
Qty.
50
Note
Order No.
1698160000
Type
ZRV 1.5/PE
Order No.
Type
Qty.
50
Order No.
1698170000
Accessories
Pluggable cross-connection
STGH plug housing
Crimp contacts
2-pole
3-pole
4-pole
10-pole
20-/24-pole
With assembly peg
Without peg
Type
STGH 4 ZRV1.5
current
Qty.
Width
5 mm
50
1698190000
STGH 4 ZRV1.5/PE GN
500
500
1705310000
1705320000
DFFC 0.2-0.35 ZRV1.5
DFFC .5-1.0 ZRV1.5
1
9014840000
HTF ZRV
current
Qty.
Order No.
Width
5 mm
50
1698200000
500
500
1705310000
1705320000
1
9014840000
Reel packaged
Single contacts
Test adapter
End plate / Partition plate
Tools
Identification systems
DFFC 0.2-0.35 ZRV1.5
DFFC .5-1.0 ZRV1.5
Strain relief
Plug housing black
Black plug enclosure
beige Wemid
Crimping tool
Mounting tool
(see assortment in catalogue 7)
Marking tags
HTF ZRV
DEK 5/5
DEK 5/5
Note
C.94
1282250000 – 2012/2013
Pluggable standard terminals WeiCoS
2.5 mm²
ZRV 2.5/1
2.5 mm²
Terminals, Z-Series
ZRV 2.5/2
5.2 x 115 x 70
10 / 4
0.21...4
5.2 x 115 x 70
/4
0.5...4
C
IEC 60947-7-1, IEC 61984
IEC
250
10
2.5
UL
CSA
300 (C)
300 (D)
10 (C)
10 (D)
AWG 24...14
AWG 26...14
4 kV / 3
A2 / V-0
r{#
Rated connection
0.5...4 / 0.5...4
0.5...2.5 / 0.5...2.5
10 / 0.6 x 3.5 mm
Crimp connection
0.5...2.5
Type
ZRV 2.5/2
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
IEC
250
10
2.5
Qty.
50
UL
CSA
300 (C)
10 (C)
AWG 24...14
4 kV / 3
/ V-0
{#
Rated connection
0.5...4
0.5...2.5
10 / 0.6 x 3.5 mm
Order No.
1906970000
Type
ZRV 2.5/1
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
Crimp connection
0.5...2.5
Qty.
50
Order No.
1906960000
STGH ZRV2.5
STGH O.ZA ZRV2.5
current
24 A
24 A
24 A
24 A
24 A
Width
5.15 mm
5.15 mm
50
50
1907000000
1907010000
STGH ZRV2.5
STGH O.ZA ZRV2.5
current
24 A
24 A
24 A
24 A
24 A
Width
5.15 mm
5.15 mm
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
50
50
1907000000
1907010000
FEKO ZRV2.5 0.2-0.35
FEKO ZRV2.5 0.5-1
FEKO ZRV2.5 1.5-2.5
FEKO ET ZRV2.5 0.2-0.35
FEKO ET ZRV2.5 0.5-1
FEKO ET ZRV2.5 1.5-2.5
4.15 mm 5000
4.15 mm 5000
4.15 mm 4000
4.15 mm 500
4.15 mm 500
4.15 mm 500
1854750000
1854760000
1848480000
1893940000
1893970000
1893990000
FEKO ZRV2.5 0.2-0.35
FEKO ZRV2.5 0.5-1
FEKO ZRV2.5 1.5-2.5
FEKO ET ZRV2.5 0.2-0.35
FEKO ET ZRV2.5 0.5-1
FEKO ET ZRV2.5 1.5-2.5
4.15 mm 5000
4.15 mm 5000
4.15 mm 4000
4.15 mm 500
4.15 mm 500
4.15 mm 500
1854750000
1854760000
1848480000
1893940000
1893970000
1893990000
ZE ZRV2.5
5 mm
STGH O.R/SW ZRV2.5
5.15 mm
STGH O.ZA/O.R/SW ZRV2.5 5.15 mm
25
25
25
2318670000
1898420000
1898430000
ZE ZRV2.5
5 mm
STGH O.R/SW ZRV2.5
5.15 mm
STGH O.ZA/O.R/SW ZRV2.5 5.15 mm
25
25
25
2318670000
1898420000
1898430000
AP ZRV2.5
10
1906980000
AP ZRV2.5
10
1906980000
1
1
9201040000
1866760000
HTF AFK 2.5
Removal Tool AFK
1
1
9201040000
1866760000
HTF AFK 2.5
Removal Tool AFK
DEK 5/5 / WS 12/5
1282250000 – 2012/2013
5.1 mm
5.1 mm
DEK 5/5 / WS 12/5
C.95
Pluggable standard terminals WeiCoS
ZP 2.5/1AN
Plug-in connector
2.5 mm²
Terminals, Z-Series
ZP 2.5/1AN/GN/BE
2.5 mm²
2 to 17-pole
Connectors each with one green pole
1...17-pole
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 16 x 41
24 / 4
0.13...4
5.1 x 16 x 41
24 / 4
0.13...4
IEC 60947-7-1, IEC 61984
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
IEC
500
24
2.5
V
A
mm²
UL
CSA
300 (C)
300 (C)
20 (C)
20 (C)
AWG 26...12
26...12
6 kV / 3
A2 / V-0
IEC
500
24
2.5
|{u#i
mm²
mm²
mm/-
Note
UL
CSA
300 (C)
300 (C)
20 (C)
20 (C)
AWG 26...12
26...12
6 kV /
A2 / V-0
|{ui
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
Type
ZP 2.5/1AN/1
ZP 2.5/1AN/2
ZP 2.5/1AN/3
ZP 2.5/1AN/4
ZP 2.5/1AN/5
ZP 2.5/1AN/6
ZP 2.5/1AN/7
ZP 2.5/1AN/8
ZP 2.5/1AN/9
ZP 2.5/1AN/10
ZP 2.5/1AN/11
ZP 2.5/1AN/12
ZP 2.5/1AN/13
ZP 2.5/1AN/14
ZP 2.5/1AN/15
ZP 2.5/1AN/16
ZP 2.5/1AN/17
ZP 2.5/1AN/24
ZP 2.5/1AN/1 GN
Type
Ordering data
Version
1-pole
2-pole
3-pole
4-pole
5-pole
6-pole
7-pole
8-pole
9-pole
10-pole
11-pole
12-pole
13-pole
14-pole
15-pole
16-pole
17-pole
24-pole
1-pole (green Wemid)
Qty.
50
25
25
25
25
25
25
20
20
20
20
20
10
10
10
10
10
10
50
Order No.
1815430000
1815440000
1815450000
1815500000
1815510000
1815520000
1815530000
1815540000
1815550000
1815560000
1815570000
1815580000
1815590000
1815600000
1815610000
1815620000
1815180000
1815720000
1820580000
Note
Qty.
Order No.
ZP 2.5/1AN/2 GN/BE
ZP 2.5/1AN/3 GN/BE
ZP 2.5/1AN/4 GN/BE
ZP 2.5/1AN/5 GN/BE
ZP 2.5/1AN/6 GN/BE
ZP 2.5/1AN/7 GN/BE
ZP 2.5/1AN/8 GN/BE
ZP 2.5/1AN/9 GN/BE
ZP 2.5/1AN/10 GN/BE
ZP 2.5/1AN/11 GN/BE
ZP 2.5/1AN/12 GN/BE
ZP 2.5/1AN/13 GN/BE
ZP 2.5/1AN/14 GN/BE
ZP 2.5/1AN/15 GN/BE
25
25
25
25
25
25
20
20
20
20
20
10
10
10
1867090000
1867100000
1867110000
1867120000
1867130000
1867140000
1867150000
1867160000
1867170000
1867180000
1867190000
1867200000
1867210000
1867220000
ZP 2.5/1AN/17 GN/BE
10
1867240000
The technical specifications are only valid for use in conjunction with PE terminals, according to DIN EN 60947-7-2.
Accessories
Pluggable cross-connection
Test adapter
Screwdriver
Group designation
Identification systems
Type
current
Qty.
Standard
ZTA ZT2.5
Width
5.1 mm
Standard
SDIS SL 0.6X3.5X100
2-pole
3-pole
10-pole
Group designation
Protective strips transparent
Push-in tag blank
(see assortment in catalogue 7)
Marking tags
ZGB 30
STR 7 F.SCHT 7
ESO 7 A4-BOGEN WEISS
DEK 5/5 / WS 10/5
7 mm
6.3 mm
6.3 mm
Order No.
Type
current
Qty.
25
1827080000
ZTA ZT2.5
Width
5.1 mm
25
1827080000
1
1274660000
SDIS SL 0.6X3.5X100
1
1274660000
20
20
10
1611930000
0515300000
1607720000
ZGB 30
STR 7 F.SCHT 7
ESO 7 A4-BOGEN WEISS
20
20
10
1611930000
0515300000
1607720000
7 mm
6.3 mm
6.3 mm
Order No.
DEK 5/5 / WS 10/5
Note
C.96
1282250000 – 2012/2013
Pluggable standard terminals WeiCoS
2.5 mm²
1...17-pole
ZP 2.5/2AN/QV
2.5 mm²
1...16-pole
5.1 x 23 x 41
24 / 4
0.13...4
5.1 x 37 x 41
24 / 4
0.13...4
UL
CSA
300 (C)
300 (C)
20 (C)
20 (C)
AWG 26...12
26...12
6 kV /
A2 / V-0
IEC
500
24
2.5
|{u#i
6.5 x 22.5 x 47.5
32 / 6
0.13...6
IEC
800
32
4
UL
CSA
600 (C)
600 (C)
28 (C)
28 (C)
AWG 26...10
AWG 26...10
8 kV / 3
A3 / V-0
r{#
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
Rated connection
0.5...6
0.5...6 / 0.5...4
12 / 0.6 x 3.5 mm
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
CSA current and voltage, acc. to Gr. C
Type
ZP 2.5/1AN/QV/1
ZP 2.5/1AN/QV/2
ZP 2.5/1AN/QV/3
ZP 2.5/1AN/QV/4
ZP 2.5/1AN/QV/5
ZP 2.5/1AN/QV/6
ZP 2.5/1AN/QV/7
ZP 2.5/1AN/QV/8
ZP 2.5/1AN/QV/9
ZP 2.5/1AN/QV/10
ZP 2.5/1AN/QV/11
ZP 2.5/1AN/QV/12
ZP 2.5/1AN/QV/13
ZP 2.5/1AN/QV/14
ZP 2.5/1AN/QV/15
ZP 2.5/1AN/QV/16
ZP 2.5/1AN/QV/17
ZP 2.5/1AN/QV/1 GN
Type
ZQV 2.5N/2 GE
ZQV 2.5N/3 GE
ZQV 2.5N/10 GE
ZTA ZT2.5
current
24 A
24 A
24 A
Width
5.1 mm
SDIS SL 0.6X3.5X100
ZGB 30
STR 7 F.SCHT 7
ESO 7 A4-BOGEN WEISS
DEK 5/5 / WS 10/5
1282250000 – 2012/2013
7 mm
6.3 mm
6.3 mm
Qty.
50
25
25
25
25
25
25
20
20
20
20
20
10
10
10
10
10
Order No.
1815190000
1815200000
1815210000
1815220000
1815230000
1815240000
1815250000
1815260000
1815270000
1815280000
1815290000
1815300000
1815310000
1815320000
1815330000
1815340000
1815350000
Type
ZP 2.5/2AN/QV/1
ZP 2.5/2AN/QV/2
ZP 2.5/2AN/QV/3
ZP 2.5/2AN/QV/4
ZP 2.5/2AN/QV/5
ZP 2.5/2AN/QV/6
ZP 2.5/2AN/QV/7
ZP 2.5/2AN/QV/8
ZP 2.5/2AN/QV/9
ZP 2.5/2AN/QV/10
ZP 2.5/2AN/QV/11
ZP 2.5/2AN/QV/12
ZP 2.5/2AN/QV/13
ZP 2.5/2AN/QV/14
ZP 2.5/2AN/QV/15
ZP 2.5/2AN/QV/16
50
1820570000
ZP 2.5/2AN/QV/1 GN
Qty.
60
60
20
Order No.
1693800000
1693810000
1693880000
Type
ZQV 2.5N/2 GE
ZQV 2.5N/3 GE
ZQV 2.5N/10 GE
25
1827080000
ZTA ZT2.5
1
1274660000
SDIS SL 0.6X3.5X100
20
20
10
1611930000
0515300000
1607720000
ZGB 30
STR 7 F.SCHT 7
ESO 7 A4-BOGEN WEISS
DEK 5/5 / WS 10/5
C
IEC 60947-7-1, IEC 61984
UL
CSA
300 (C)
300 (C)
20 (C)
20 (C)
AWG 26...12
26...12
6 kV / 3
A2 / V-0
|{u#i
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
4 mm²
1...16-pole
IEC 60947-7-1, IEC 61984
IEC
500
24
2.5
ZP 4/1AN
Terminals, Z-Series
ZP 2.5/1AN/QV
current
24 A
24 A
24 A
Width
5.1 mm
7 mm
6.3 mm
6.3 mm
Qty.
50
20
20
20
20
20
20
10
10
10
10
10
5
5
5
5
Order No.
1815730000
1815740000
1815750000
1815760000
1815770000
1815780000
1815790000
1815800000
1815810000
1815820000
1815830000
1815840000
1815850000
1815860000
1815870000
1815880000
Type
ZP 4/1AN/1
ZP 4/1AN/2
ZP 4/1AN/3
ZP 4/1AN/4
ZP 4/1AN/5
ZP 4/1AN/6
ZP 4/1AN/7
ZP 4/1AN/8
ZP 4/1AN/9
ZP 4/1AN/10
ZP 4/1AN/11
ZP 4/1AN/12
ZP 4/1AN/13
ZP 4/1AN/14
ZP 4/1AN/15
ZP 4/1AN/16
50
1820590000
ZP 4/1AN/1 GN
Qty.
60
60
20
Order No.
1693800000
1693810000
1693880000
Type
25
1827080000
1
1274660000
20
20
10
1611930000
0515300000
1607720000
SDIS SL 0.6X3.5X100
current
Width
Qty.
50
25
25
25
20
20
20
20
10
10
20
10
10
10
10
10
Order No.
1848340000
1854990000
1855000000
1855010000
1855020000
1855030000
1855040000
1855050000
1855060000
1855070000
1855080000
1855090000
1855100000
1855110000
1855120000
1855130000
50
1854980000
Qty.
Order No.
1
1274660000
DEK 5/5 / WS 10/6
C.97
Pluggable standard terminals WeiCos – Accessories
Terminals, Z-Series
WeiCoS – single slice elements
Single slice elements for self-assembly
The WeiCoS single slice elements from Weidmüller enhance flexibility by
providing a solution for almost every application. The plug-in connectors are
pipped together to offer a compact modular solution directly in situ to suit
the particular application. These single slices are available in green (GN) and
beige (BE).
Single slice element ZP 2.5/1AN plug
Single slice element ZP 2.5/1AN/QV plug
C
Ordering data
Type
ZP 2.5/1AN
ZP 2.5/1AN ZA O.RA
ZP 2.5/1AN ZA
ZP 2.5/1AN ZA O.RA BL
ZP 2.5/1AN ZA BL
ZP 2.5/1AN GN
ZP 2.5/1AN ZA O.RA GN
ZP 2.5/1AN ZA GN
Qty.
50
50
50
50
50
50
50
50
Order No.
1875150000
1875210000
1875190000
1972980000
1009070000
1875180000
1875220000
1875200000
Construction of plug:
1 start element
1875150000 BE
1875180000 GN
C.98
Ordering data
Type
ZP 2.5/1AN/QV
ZP 2.5/1AN/QV ZA O.RA
ZP 2.5/1AN/QV ZA
ZP 2.5/1AN/QV BL
ZP 2.5/1AN/QV ZAO.RA BL
ZP 2.5/1AN/QV ZA BL
ZP 2.5/1AN/QV GN
ZP 2.5/1AN/QV ZAO.RA GN
ZP 2.5/1AN/QV ZA GN
Qty.
50
50
50
50
50
50
50
50
50
Order No.
1007900000
1007960000
1007930000
1007910000
1007970000
1007940000
1007920000
1007980000
1007950000
Construction of plug:
n-2 core element
1875210000 BE
1972980000 BL
1875220000 GN
1 end element
1875190000 BE
1009070000 BL
1875200000 GN
1 start element
1007900000 BE
1007910000 BL
1007920000 GN
n-2 core element
1007960000 BE
1007970000 BL
1007980000 GN
1 end element
1007930000 BE
1007940000 BL
1007950000 GN
1282250000 – 2012/2013
Terminals, Z-Series
Pluggable standard terminals WeiCos – Accessories
Single slice element ZP 2.5/2AN/QV plug
Single slice element ZPS coupling
C
Ordering data
Type
ZP 2.5/2AN/QV
ZP 2.5/2AN/QV ZA O.RA
ZP 2.5/2AN/QV ZA
ZP 2.5/2AN/QV BL
ZP 2.5/2AN/QV ZAO.RA BL
ZP 2.5/2AN/QV ZA BL
ZP 2.5/2AN/QV GN
ZP 2.5/2AN/QV ZAO.RA GN
ZP 2.5/2AN/QV ZA GN
Qty.
50
50
50
50
50
50
50
50
50
Order No.
1007810000
1007870000
1007840000
1007820000
1007880000
1007850000
1007830000
1007890000
1007860000
Construction of plug:
1 start element
1007810000 BE
1007820000 BL
1007830000 GN
Ordering data
Type
GHDE ZPS 2.5/1AN
ZPS 2.5/1AN/QV/1GN
ZPS 2.5/1AN/QV
Qty.
50
50
50
Order No.
1866070000
1861050000
1861040000
Construction of coupling:
n-2 core element
1007870000 BE
1007880000 BL
1007890000 GN
1 end element
1007840000 BE
1007850000 BL
1007860000 GN
n-pol. single elements
1861040000 BE
1861050000 GN
1 x cover
1861040000 BE
1861050000 GN
1866070000
Single slice
element plugged
into start element
1282250000 – 2012/2013
C.99
Pluggable standard terminals WeiCos – Accessories
Terminals, Z-Series
Plug accessories
WeiCoS 2.5 mm2
Locking element
ZVR ZP 2.5
Test adapter
ZTA ZT 2.5
1 x 1827080000 and
(n-1) x 1847600000 are required
for setting up n-pole blocks.
Ordering data
C
Coding element
Type
ZVR ZP 2.5
Qty.
25
Order No.
1816130000
KOSF ZT 2.5
Ordering data
Locking element
Type
ZTA ZT 2.5 (without spigot)
ZTA ZT 2.5 (with spigot)
Qty.
25
25
Order No.
1827080000
1847600000
Qty.
20
Order No.
1878620000
Qty.
50
Order No.
1861030000
ZVR ZPS 2.5
ZVR ZP 2.5 in conjunction with
separate coupling
Ordering data
Type
KOSF ZT 2.5
Strain relief
ZZE ZP 2.5
Ordering data
C.100
Type
ZZE ZP 2.5 – 1-pole
ZZE ZP 2.5/4 – 4-pole
ZZE ZP 2.5/8 – 8-pole
Qty.
50
Order No.
1816150000
Ordering data
Protective cover
Qty.
25
25
25
Order No.
1816140000
1866220000
1866230000
Ordering data
Type
ZVR ZPS 2.5
ZAD ZT / ZPS 2.5
Type
ZAD ZT / ZPS 2.5
1282250000 – 2012/2013
Pluggable standard terminals WeiCos – Accessories
Terminals, Z-Series
Plug accessories
WeiCoS 4 mm2
Locking element
Ordering data
Coding element
ZVR ZP 4
Type
ZVR ZP 4
Order No.
1855250000
Qty.
50
Order No.
1856860000
Qty.
25
Order No.
1855260000
C
KOSF ZT 4
Ordering data
Type
KOSF ZT 4
Strain relief
ZZE ZP 4
Ordering data
Type
ZZE ZP 4
1282250000 – 2012/2013
Qty.
25
C.101
Pluggable standard terminals WeiCos – Accessories
Terminals, Z-Series
Mounting set – separate coupling
C
Individual applications without the use of component parts would be
unthinkable in industry today.
Coupled with high temperature and vibration demands, modularity requires the
use of specially tested products. Wherever functional units are pre-assembled
or have to be quickly separated, flexible systems are high on the agenda. The
WeiCoS separate coupling represents a further extension to the Weidmüller
modular concept. It is the ideal solution for wiring without “heavyweight”
enclosures.
ZPS 2.5/1AN/QV
In addition, this separate coupling concept from Weidmüller represents a
compact alternative to the through-panel plug-in connector or signal and lighting
distribution terminals. Together with the pluggable modular terminals from the
WeiCoS range, they form an ideal combination for creating flexible, functional
units.
Separate coupling –
3 plugs, 1 line
Separate coupling
ZP 2.5/1AN
Side-fitting lock. element
Strain relief – 4-pole
C.102
1282250000 – 2012/2013
Separate coupling
Ordering data
Strain relief
Ordering data
Side-fitting locking element
Ordering data
1282250000 – 2012/2013
Alternative to the
ZVR ZP 2.5
side-fitting locking element,
the central locking element
ZVLA1 ZPS 2.5
Type
ZVLA1 ZPS 2.5
Qty.
20
Order No.
1866250000
Ordering data
Qty.
25
25
25
Order No.
1816140000
1866220000
1866230000
Ordering data
ZVR ZPS 2.5
Type
ZVR ZPS 2.5
Type
ZVR ZP 2.5
Qty.
20
Order No.
1816130000
C
ZP 2.5/1AN/6
ZZE ZP 2.5 / 4 / 8
Type
ZZE ZP 2.5 – 1-pole
ZZE ZP 2.5/4 – 4-pole
ZZE ZP 2.5/8 – 8-pole
Terminals, Z-Series
Pluggable standard terminals WeiCos – Accessories
Type
ZP 2.5/1AN/6
Qty.
25
Order No.
1815520000
Qty.
25
Order No.
1865940000
ZPS 2.5/1AN/QV 6
Qty.
20
Order No.
1878620000
Ordering data
Type
ZPS 2.5/1AN/QV 6
C.103
Pluggable standard terminals WeiCos – Accessories
Terminals, Z-Series
Mounting set – coupling
Screwed through-wall fixing
The new options
Although a separate coupling is very useful (enabling
a connection to be disconnected at any point), users
do not always want them to be quite so readily
separable.
We have therefore devised the following fixing
variations for separate couplings:
C
•Screws for fixing to a mounting plate or enclosure
wall.
•Clips for fixing to a mounting plate or enclosure
wall (in this version every pole can be provided
with a clip if required).
•Clips for direct fixing to a terminal rail
(TS 15 or TS 35).
Type
ZVLA DF ZPS2.5
Qty.
20
Order No.
1878600000
Of special note is the fact that the coupling blocks
can be supplied already fitted with the fixings you
require.
d
y
=
ø 3.3 mm
(0.13")
(M3)
19.5 mm (+ 0.5 mm)
0.77" (+ 0.02")
=
0.8 - 3 mm
0.03" - 0.12"
WeiCoS
y = n x 5.1 mm + 5.5 mm
d = n x 5.1 mm + 13.5 mm
n-pole
Plug-in connector system with an infinite
number of combinations – but always with the
same fitting method.
C.104
2-pole
3-pole
4-pole
5-pole
6-pole
7-pole
8-pole
9-pole
10-pole
11-pole
12-pole
13-pole
14-pole
15-pole
16-pole
mm
15.7
20.8
25.9
31.0
36.1
41.2
46.3
51.4
56.5
61.6
66.7
71.8
76.9
82.0
87.1
y
inch(")
0.62
0.82
1.02
1.22
1.42
1.62
1.82
2.02
2.22
2.43
2.63
2.83
3.03
3.23
3.43
y = n x 0.25" + 0.216"
d = n x 0.25" + 0.53"
mm
23.7
28.8
33.9
38.9
44.1
49.2
54.3
59.4
64.5
69.6
74.7
79.8
84.9
90.0
95.1
d
inch(")
0.93
1.13
1.33
1.53
1.74
1.94
2.14
2.34
2.55
2.74
2.94
3.14
3.34
3.54
3.74
1282250000 – 2012/2013
Pluggable standard terminals WeiCos – Accessories
Direct mounting – clipped
on terminal rail
Terminals, Z-Series
Direct mounting – screwed
Type
ZVLA SC ZPS 2.5
Qty.
20
Order No.
1866240000
Type
ZVLA RC ZPS 2.5
Qty.
20
Order No.
1866260000
Type
MOFU 15/35 ZPS 2.5
Qty.
25
Order No.
1899170000
C
Type
BA RC ZPS 2.5
Plug support prevents buckling of the connection
Type
BA ZPS 2.5
Qty.
100
Order No.
1908550000
Qty.
100
Order No.
1908560000
Plug support prevents buckling of the connection
Type
BA ZPS 2.5
Qty.
100
Order No.
1908550000
TS 15
5.1 mm x n + 11 mm
0.25" x n + 0.43"
0.6 - 1.3 mm
0.02" - 0.05"
1282250000 – 2012/2013
ø 3.5 mm
0.13"
5.1 mm
0.25"
TS 35
0.6 - 1.3 mm
0.02" - 0.05"
C.105
Pluggable standard terminals WeiCos – Accessories
ZT 2.5/3AN/1
ZTTR 2.5/3AN/1
62.5
Terminals, Z-Series
ZT 2.5/2AN/1
58
62.5
C
58
62.5
62.5
A connector alignment:
the ZTTR can be combined with ZTPE 2.5.
71
62.5
58
62.5
62.5
58
71
58
C.106
62.5
62.5
58
71
1282250000 – 2012/2013
Pluggable standard terminals WeiCos – Accessories
78.3
Terminals, Z-Series
ZT 2.5/4AN/4
62.5
ZTD 2.5/2
62.5
ZT 2.5/4AN/2
94.7
87
62.5
62.5
82.2
94.7
C
62.5
62.5
78.2
92.6
82.2
106.2
78.3
62.5
94.7
97
78.2
62.5
62.5
84.6
95
97
84.5
1282250000 – 2012/2013
C.107
Terminals, Z-Series
Overview initiator and actuator terminals
A modular distribution system
with proven tension-clamp connections
Distribution terminal bars from stackable single
modules, consisting of carrier and base elements
C
The basis for this modular system is the side-by-side
mounting of the individual modules of the distribution
terminals with their integral cross-connection. The female
contact is on one side, the male contact on the other.
Thanks to the modular thin-element design, variable
distribution strips can be set up to suit the application.
The base elements, which are clipped onto TS 35 terminal
rails, form the supports for these module combinations.
These base elements are available in a number of different
versions:
• Carrier elements with and without signal lines for 3- and
4-wire connections
• Modular construction which enables individual
configuration
Simple operation
The distribution terminals with integrated
cross-connections can be joined together and
be snapped into the base elements by hand.
C.108
1282250000 – 2012/2013
Integrated cross-connection
Potential distribution with integrated crossconnections of the male and female contacts.
Pin and socket contacts
Terminals, Z-Series
Overview initiator and actuator terminals
C
Modular system
Variable number of poles available on account
of their simple connection or seperation
capabilities.
For initiators and actuators
The modular distribution strip system is
a convenient way to supply initiators and
actuators with three- or four-wire power
connections.
S
+
S
PE
S
+
PE
1282250000 – 2012/2013
C.109
Initiator and actuator terminals
Terminals, Z-Series
ZPV 1.5
The modular distribution strip system
1.5 mm²
Base element
ZIA 1.5/3 L...
1.5 mm²
Base element 3-wire
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 67.8 x 38.35
5.08 x 68.5 x 46
/ 2.5
0.13...2.5
IEC 60947-7-1
IEC 60947-7-1
Rated data
Rated voltage
Max. voltage of clamp support & pluggable system
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
IEC
250
V
V
A
mm²
17.5
1.5
UL
300 (D)
CSA
IEC
250
10 (D)
AWG 26...14
AWG 26...14
4 kV / 3
/ V-0
17.5
1.5
ra
mm²
mm²
mm/-
UL
300 (D)
CSA
300 (D)
10 (D)
10 (D)
AWG 26...14
AWG 26...14
4 kV / 3
A1 / V-0
r#a
Rated connection
Rated connection
0.5...2.5
0.5...2.5 / 0.5...1.5
8 / 0.6 x 3.5 mm
Note
Bi-directional LED in ZIA 1.5/3L-1/LD (1651990000)
Ordering data
Base terminal
Base terminal
Base terminal with LED
PE base terminal
Dark beige Wemid
Blue Wemid
Brown Wemid
Dark beige Wemid
green/yellow Wemid
Note
Type
ZPV 1.5
Qty.
100
Order No.
1676630000
Type
ZIA 1.5/3L-1S
ZIA 1.5/3L-1S/LD-RT
ZIA 1.5/3L-PE
Qty.
100
50
20
Order No.
1651980000
1651990000
1652000000
ZVL 1.5 O.QV = distribution strip without internal bridge for park position
ZVL 1.5 O.QV = distribution strip without internal bridge for park position
Type
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/50
Accessories
Pluggable cross-connection
Reducing sleeves
End plate / Partition plate
Screwdriver
Identification systems
Note
C.110
2-pole
3-pole
4-pole
10-pole
50-pole
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
Dark beige Wemid
With assembly peg
Without peg
Standard
(see assortment in catalogue 7)
Marking tags
ZAP/TW ZPV1.5
current
Width
5.08 mm
SDIS SL 0.6X3.5X100
DEK 5/5 / WS 12/5
Qty.
Order No.
Order No.
1608860000
1608870000
1608880000
1608940000
1697540000
ZRH 1.5N/1
ZRH 1.5N/2
current Qty.
24 A
60
24 A
60
24 A
60
24 A
20
24 A
10
Width
4.85 mm 1000
4.85 mm 1000
5.08 mm
50
1649540000
1
1274660000
50
1674650000
ZAP/TW ZIA1.5/3L
1
1274660000
SDIS SL 0.6X3.5X100
1632140000
1632130000
DEK 5/5
For holding the ZVL 1.5 distribution strip
1282250000 – 2012/2013
Initiator and actuator terminals
ZIA 1.5/4 L...
1.5 mm²
1.5 mm²
Distribution strip
5.08 x 81.5 x 46
/ 2.5
0.13...2.5
5.08 x 12.9 x 17.45
/ 2.5
0.13...2.5
IEC 60947-7-1
C
IEC 60947-7-1
IEC
250
17.5
1.5
ZVL 1.5
Terminals, Z-Series
Base element 4-wire
UL
300 (D)
CSA
IEC
250
10 (D)
AWG 26...14
AWG 26...14
4 kV / 3
A1 / V-0
17.5
1.5
r#a
UL
300 (D)
CSA
300 (D)
10 (D)
10 (D)
AWG 26...14
AWG 26...14
4 kV / 3
A2 / V-0
r#a
Rated connection
0.5...2.5
0.5...2.5 / 0.5...1.5
8 / 0.6 x 3.5 mm
Rated connection
0.5...2.5
0.5...2.5 / 0.5...1.5
7 / 0.6 x 3.5 mm
Bi-directional LED in ZIA 1.5/4L-1/LD (1652020000)
Type
ZIA 1.5/4L-1S
ZIA 1.5/4L-1S/LD
ZIA 1.5/4L-PE
Qty.
100
50
20
Order No.
1652010000
1652020000
1652030000
Type
Qty.
Order No.
ZVL 1.5
ZVL 1.5 BL
ZVL 1.5 BR
ZVL 1.5 O.QV
ZVL 1.5/PE GN/GE BED
100
100
100
100
100
1649300000
1650360000
1650370000
1711930000
1651970000
ZVL 1.5 O.QV = distribution strip without internal bridge for park position
ZVL 1.5 O.QV = distribution strip without internal bridge for park position
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/50
Order No.
1608860000
1608870000
1608880000
1608940000
1697540000
Type
ZRH 1.5N/1
ZRH 1.5N/2
current Qty.
24 A
60
24 A
60
24 A
60
24 A
20
24 A
10
Width
4.85 mm 1000
4.85 mm 1000
1632140000
1632130000
ZRH 1.5N/1
ZRH 1.5N/2
ZAP/TW ZIA1.5/4L
5.08 mm
1649550000
SDIS SL 0.6X3.5X100
DEK 5/5
50
1
1274660000
BZT ZVL1.5
BZT ZVL1.5/O.ZA
SDIS SL 0.6X3.5X100
current
Qty.
Width
4.85 mm 1000
4.85 mm 1000
5 mm
5 mm
Order No.
1632140000
1632130000
100
100
1676610000
1676620000
1
1274660000
DEK 5/5
Integrated cross-connectors.
Distribution strip for base element ZPV 1.5 Order no. 1676630000
1282250000 – 2012/2013
C.111
Terminals, Z-Series
Overview mini terminals
Modular design
This mini-terminal family in tension clamp technology can be
used to assemble individual blocks with 2- and 4-pole
terminals.
C
An individual colour scheme for individual connection
groups allows visual differentiation between different
circuits.
There are three different marking options for quick and clear
identification of each terminal.
Made of Weidmüller’s top quality WEMID insulation,
all block terminals comply with requirements for a V0
flammability class to UL94.
With a structural width of only 5 mm (2 connections)
or 10 mm (4 connections), the TOP connection system
guarantees clearly organised wiring of circuits, even in
terminal boxes with restricted space.
Middle terminal
for mounting rail TS 15
End plate
Individual blocks are put together from
middle terminals and an end plate
for the open side. Screw fastening
involves the first middle terminal and
the end plate being replaced by end
terminals for fastening purposes. With
the other fastening variations, middle
terminals with means of fastening
are integrated within the block or a
mounting foot (MOFU) is used for
fitting to the mounting rail.
End terminal
Middle terminals
for direct mounting
Mounting block
C.112
1282250000 – 2012/2013
Terminals, Z-Series
Overview mini terminals
... with 4 different means of fastening
Direct mounting with screw
fastening on mounting plate
ZDUB 2.5-2 DM
The fastening terminals on the
right and left of the terminal block
are mounted using M3 screws.
Central fastening is not possible in
this case.
Clip-on fastening on
mounting plates
ZDUB 2.5-2 RC
C
Drilling plan:
ZDUB/2.5-2/2AN
The terminals are simply clipped
onto mounting plates 0.6 – 1.2 mm
thick with the clips in the 3.5 mm
holes. The open side of the
terminal is closed by an end plate.
ZDUB 2.5-2/4AN
Fitting on mounting rail TS 15
For clipping on mounting rail
TS 15. The open side of the
terminal is closed by an end plate.
ZPEB 2.5-2 TS 15
Mounting foot
for mounting rail TS 15/35
The mounting foot can be used for
clipping terminal blocks consisting
only of middle terminals either to
TS 15 or TS 35 mounting rails.
MOFU TS 15/35
1282250000 – 2012/2013
C.113
Mini terminals
Terminals, Z-Series
ZDUB 2.5-2/2AN/RC
Terminal blocks for different fixing systems
2.5 mm²
Two connections
ZDUB 2.5-2/4AN/RC
2.5 mm²
Four connections
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 33.2 x 29
30 / 4
0.13...4
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
V
A
mm²
IEC
800
24
2.5
r#ia
mm²
mm²
mm/-
Note
Ex e II
T
10.2 x 33.5 x 29
30 / 4
0.13...4
II 2 G D
UL
CSA
EN 60079-7
600 (C)
600 (C)
550
20 (C)
25 (C)
21
AWG 26...12
AWG 26...12
2.5
8 kV / 3
A2 / V-0
KEMA 97ATEX2755 U
Rated connection
0.5...4
0.5...2.5 / 0.5...1.5
10 / 0.6 x 3.5 mm
Snap-on clip
IEC 60947-7-1
IEC
800
24
2.5
r#ia
Ex e II
T
II 2 G D
UL
CSA
EN 60079-7
600 (C)
600 (C)
550
20 (C)
25 (C)
21
AWG 26...12
AWG 26...12
2.5
8 kV / 3
A2 / V-0
KEMA 97ATEX2755 U
Rated connection
0.5...4
0.5...2.5 / 0.5...1.5
10 / 0.6 x 3.5 mm
Snap-on clip
Ordering data
Central terminals
Dark beige Wemid
Blue Wemid
Yellow Wemid
Orange Wemid
Note
Type
ZDUB 2.5-2/2AN/RC
ZDUB 2.5-2/2AN/RC BL
ZDUB 2.5-2/2AN/RC GE
ZDUB 2.5-2/2AN/RC OR
Qty.
100
100
100
100
Order No.
1712820000
1712830000
1712850000
1712840000
Type
ZDUB 2.5-2/4AN/RC
ZDUB 2.5-2/4AN/RC BL
ZDUB 2.5-2/4AN/RC GE
Qty.
100
100
100
Order No.
1712970000
1712980000
1713000000
Diameter of the snap-on clip mounting holes is 3.5 mm when the thickness of the
plate is 0.6-961.2 mm.
Diameter of the snap-on clip mounting holes is 3.5 mm when the thickness of the
plate is 0.6-961.2 mm.
Type
ZQB 2.5-2
Accessories
Pluggable cross-connection
End plate / Partition plate
Screwdriver
Identification systems
Note
C.114
2-pole
Dark beige Wemid
Blue Wemid
Orange PA
Standard
(see assortment in catalogue 7)
Marking tags
ZAP ZDUB
ZAP ZDUB BL
ZAP ZDUB OR
SDIS SL 0.6X3.5X100
current
24 A
Qty.
50
Order No.
1677120000
Type
ZQB 2.5-2
Width
5 mm
5 mm
5 mm
50
50
50
1704750000
1704760000
1704770000
ZAP ZDUB
ZAP ZDUB BL
ZAP ZDUB OR
1
1274660000
SDIS SL 0.6X3.5X100
current
24 A
Qty.
50
Order No.
1677120000
Width
5 mm
5 mm
5 mm
50
50
50
1704750000
1704760000
1704770000
1
1274660000
DEK 5/5 / WS 10/5
DEK 5/5 / WS 10/5
The terminal blocks are cross-connected when using the ZQB 2.5 (1677120000).
The terminal blocks are cross-connected when using the ZQB 2.5 (1677120000).
1282250000 – 2012/2013
Mini terminals
ZDUB 2.5-2/2AN/DM
2.5 mm²
Two connections
ZDUB 2.5-2/4AN/DM
2.5 mm²
Four connections
Terminals, Z-Series
Terminal blocks for different fixing systems
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 33.5 x 24
30 / 4
0.13...4
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
V
A
mm²
IEC
800
24
2.5
r#ia
mm²
mm²
mm/-
Note
Ex e II
T
10.2 x 33.5 x 24
30 / 4
0.13...4
II 2 G D
UL
CSA
EN 60079-7
600 (C)
600 (C)
550
20 (C)
25 (C)
21
AWG 26...12
AWG 26...12
2.5...
8 kV / 3
A2 / V-0
KEMA 97ATEX2755 U
Rated connection
0.5...4
0.5...2.5 / 0.5...1.5
10 / 0.6 x 3.5 mm
Direct mounting
IEC 60947-7-1
IEC
800
24
2.5
r#ia
Ex e II
T
II 2 G D
UL
CSA
EN 60079-7
600 (C)
600 (C)
550
20 (C)
25 (C)
21
AWG 26...12
AWG 26...12
2.5...
8 kV / 3
A2 / V-0
KEMA 97ATEX2755 U
C
Rated connection
0.5...4
0.5...2.5 / 0.5...1.5
10 / 0.6 x 3.5 mm
Direct mounting
Ordering data
End terminals
Central terminals
Dark beige Wemid
Blue Wemid
Yellow Wemid
Type
ZDUB 2.5-2/2AN/DB
ZDUB 2.5-2/2AN/DB BL
ZDUB 2.5-2/2AN/DB GE
Qty.
100
100
100
Order No.
1704500000
1704510000
1704530000
Type
ZDUB 2.5-2/4AN/DB
ZDUB 2.5-2/4AN/DB BL
ZDUB 2.5-2/4AN/DB GE
Qty.
100
100
100
Order No.
1704690000
1704700000
1704720000
Dark beige Wemid
Blue Wemid
Yellow Wemid
Orange Wemid
ZDUB 2.5-2/2AN/DM
ZDUB 2.5-2/2AN/DM BL
ZDUB 2.5-2/2AN/DM GE
ZDUB 2.5-2/2AN/DM OR
100
100
100
100
1704350000
1704360000
1704380000
1704370000
ZDUB 2.5-2/4AN/DM
ZDUB 2.5-2/4AN/DM BL
ZDUB 2.5-2/4AN/DM GE
ZDUB 2.5-2/4AN/DM OR
100
100
100
100
1704540000
1704550000
1704570000
1704560000
Note
Accessories
Pluggable cross-connection
End plate / Partition plate
Mounting blocks
Screwdriver
Mounting foot for TS15 & TS35
Identification systems
Note
1282250000 – 2012/2013
2-pole
Type
ZQB 2.5-2
Dark beige Wemid
Blue Wemid
Orange PA
ZAP ZDUB
ZAP ZDUB BL
ZAP ZDUB OR
Dark beige Wemid
ZBB ZDUB
Standard
Dark beige Wemid
(see assortment in catalogue 7)
Marking tags
current
24 A
Qty.
50
Order No.
1677120000
Type
ZQB 2.5-2
Width
5 mm
5 mm
5 mm
50
50
50
1704750000
1704760000
1704770000
ZAP ZDUB
ZAP ZDUB BL
ZAP ZDUB OR
5.1 mm
50
1704740000
ZBB ZDUB
1
1274660000
SDIS SL 0.6X3.5X100
50
1723660000
MOFU 15/35 ZDUB
SDIS SL 0.6X3.5X100
MOFU 15/35 ZDUB
5 mm
current
24 A
Qty.
50
Order No.
1677120000
Width
5 mm
5 mm
5 mm
50
50
50
1704750000
1704760000
1704770000
5.1 mm
50
1704740000
1
1274660000
50
1723660000
5 mm
DEK 5/5 / WS 10/5
DEK 5/5 / WS 10/5
The terminal blocks are cross-connected when using the ZQB 2.5 (1677120000).
The terminal blocks are cross-connected when using the ZQB 2.5 (1677120000).
C.115
Mini terminals
Terminals, Z-Series
ZDUB 2.5-2/2AN/TS15
Terminal blocks for different fixing systems
2.5 mm²
Two connections
ZDUB 2.5-2/4AN/TS15
2.5 mm²
Four connections
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 33.5 x 32
30 / 4
0.13...4
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
V
A
mm²
IEC
800
24
2.5
r#ia
mm²
mm²
mm/-
Note
Ex e II
T
10.2 x 33.5 x 32
30 / 4
0.13...4
II 2 G D
UL
CSA
EN 60079-7
600 (C)
600 (C)
550
20 (C)
25 (C)
21
AWG 26...12
AWG 26...12
2.5
8 kV / 3
A2 / V-0
KEMA 97ATEX2755 U
Rated connection
0.5...4
0.5...2.5 / 0.5...1.5
10 / 0.6 x 3.5 mm
TS 15 - block construction
IEC 60947-7-1
IEC
800
24
2.5
r#ia
Ex e II
T
II 2 G D
UL
CSA
EN 60079-7
600 (C)
600 (C)
550
20 (C)
25 (C)
21
AWG 26...12
AWG 26...12
2.5
8 kV / 3
A2 / V-0
KEMA 97ATEX2755 U
Rated connection
0.5...4
0.5...2.5 / 0.5...1.5
10 / 0.6 x 3.5 mm
TS 15 - block construction
Ordering data
Central terminals
Dark beige Wemid
Blue Wemid
Green/Yellow Wemid
Orange Wemid
Type
ZDUB 2.5-2/2AN/15
ZDUB 2.5-2/2AN/15 BL
Qty.
100
100
Order No.
1712750000
1712760000
Type
ZDUB 2.5-2/4AN/15
ZDUB 2.5-2/4AN/15 BL
Qty.
100
100
Order No.
1712780000
1712790000
ZDUB 2.5-2/2AN/15 OR
100
1712770000
ZDUB 2.5-2/4AN/15 OR
100
1712800000
Note
Accessories
Pluggable cross-connection
End plate / Partition plate
Screwdriver
End bracket
Identification systems
Note
C.116
2-pole
3-pole
4-pole
10-pole
50-pole
Dark beige Wemid
Blue Wemid
Orange PA
Standard
Type
ZQB 2.5-2
ZAP ZDUB
ZAP ZDUB BL
ZAP ZDUB OR
Qty.
50
Order No.
1677120000
Type
ZQB 2.5-2
Width
5 mm
5 mm
5 mm
50
50
50
1704750000
1704760000
1704770000
ZAP ZDUB
ZAP ZDUB BL
ZAP ZDUB OR
1
1274660000
SDIS SL 0.6X3.5X100
20
7920340000
ZEW 15
SDIS SL 0.6X3.5X100
ZEW 15
(see assortment in catalogue 7)
Marking tags
current
24 A
5 mm
current
24 A
Qty.
50
Order No.
1677120000
Width
5 mm
5 mm
5 mm
50
50
50
1704750000
1704760000
1704770000
1
1274660000
20
7920340000
5 mm
DEK 5/5 / WS 10/5
DEK 5/5 / WS 10/5
The terminal blocks are cross-connected when using the ZQB 2.5 (1677120000).
The terminal blocks are cross-connected when using the ZQB 2.5 (1677120000).
1282250000 – 2012/2013
Mini terminals
2.5 mm²
Two connections
ZDUA 2.5-2
2.5 mm²
Two connections
5.1 x 33.5 x 32
/4
0.13...4
IEC 60947-7-2
Ex e II
IEC
T
II 2 G D
EN 60079-7
IEC 60947-7-1
Ex e II
II 2 G D
TS 15 - block construction
TS 15 - sliced construction
AWG 26...12
AWG 26...12
2.5
8 kV / 3
A2 / V-0
KEMA 97ATEX2755 U
Type
Qty.
Order No.
ZPEB 2.5-2
100
1712810000
Type
ZAP ZDUB
current
Qty.
Width
5 mm
SDIS SL 0.6X3.5X100
ZEW 15
DEK 5/5 / WS 10/5
1282250000 – 2012/2013
5 mm
IEC
500
24
2.5
T
Rated connection
0.5...4
0.5...2.5 / 0.5...1.5
10 / 0.6 x 3.5 mm
r{#
CSA
5.1 x 35 x 30.5
/4
0.13...4
UL
CSA
EN 60079-7
600 (C)
600 (B)
275
20 (C)
20 (B)
20
AWG 22...12
AWG 26...12
2.5
6 kV / 3
A2 / V-0
KEMA 97ATEX4678 U
r#ia
Rated connection
0.5...4
0.5...2.5 / 0.5...1.5
10 / 0.6 x 3.5 mm
24
2.5
UL
Qty.
100
100
Order No.
1720920000
1720930000
ZDUA 2.5-2 OR
100
1720940000
Type
ZQV 2.5N/2 GE
ZQV 2.5N/3 GE
ZQV 2.5N/4 GE
ZQV 2.5N/10 GE
ZQV 2.5N/50 GE
50
1704750000
ZAP/TW ZDUA
ZAP/TW ZDUA BL
ZAP/TW ZDUA OR
1
1274660000
SDIS SL 0.6X3.5X100
20
7920340000
ZEW 15
DEK 5/5 / WS 10/5
PE
IEC 60947-7-2
Ex e II
IEC
24
2.5
r#a
UL
CSA
T
II 2 G D
EN 60079-7
C
AWG 26...12
AWG 26...12
2.5
6 kV / 3
A2 / V-0
KEMA 97ATEX4678 U
Rated connection
0.5...4
0.5...2.5 / 0.5...1.5
10 / 0.6 x 3.5 mm
TS 15 - sliced construction
Type
ZDUA 2.5-2
ZDUA 2.5-2 BL
Order No.
2.5 mm²
Two connections
5.1 x 35 x 30.5
30 / 4
0.13...4
PE
ZPEA 2.5-2
Terminals, Z-Series
ZPEB 2.5-2
current
24 A
24 A
24 A
24 A
24 A
Width
1.5 mm
1.5 mm
1.5 mm
5 mm
Type
Qty.
Order No.
ZPEA 2.5-2
100
1720950000
Qty.
60
60
60
20
5
Order No.
1693800000
1693810000
1693820000
1693880000
1693890000
Type
current
Qty.
50
50
50
1720960000
1720970000
1720980000
ZAP/TW ZDUA
Width
1.5 mm
50
1720960000
1
1274660000
SDIS SL 0.6X3.5X100
1
1274660000
20
7920340000
ZEW 15
20
7920340000
5 mm
Order No.
DEK 5/5 / WS 10/5
C.117
Mini terminals
Terminals, Z-Series
ZDUA 2.5-2N
Terminal blocks for different fixing systems
2.5 mm²
Two connections
ZPEA 2.5-2N
2.5 mm²
Two connections
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
V
A
mm²
mm²
mm²
mm/-
Note
5.1 x 42.5 x 35.5
30 / 4
0.13...4
5.1 x 42.5 x 35.5
/4
0.13...4
IEC 60947-7-1
IEC 60947-7-2
IEC
800
24
2.5
UL
CSA
600 (C)
600 (C)
20 (C)
20 (C)
AWG 26...12
AWG 26...12
8 kV / 3
A2 / V-0
IEC
24
2.5
UL
CSA
AWG 26...12
AWG 26...12
8 kV / 3
A2 / V-0
r{#
r{
TS 15 - sliced construction
TS 15 - sliced construction
Rated connection
0.5...4
0.5...2.5 / 0.5...1.5
10 / 0.6 x 3.5 mm
PE
Rated connection
0.5...4
0.5...2.5 / 0.5...1.5
10 / 0.6 x 3.5 mm
Ordering data
Central terminals
Dark beige Wemid
Blue Wemid
Green/Yellow Wemid
Orange Wemid
Type
ZDUA 2.5-2N
ZDUA 2.5-2N BL
Qty.
100
100
Order No.
1808200000
1808180000
Type
Qty.
Order No.
ZPEA 2.5-2N
100
1808210000
Qty.
60
60
60
20
5
Order No.
1693800000
1693810000
1693820000
1693880000
1693890000
Type
current
Qty.
50
1808170000
ZAP/TW ZDUA2.5-2N
Width
2.5 mm
50
1808170000
1
1274660000
SDIS SL 0.6X3.5X100
1
1274660000
20
7920340000
ZEW 15
20
7920340000
Note
Accessories
Pluggable cross-connection
End plate / Partition plate
Screwdriver
End bracket
Identification systems
2-pole
3-pole
4-pole
10-pole
50-pole
Type
ZQV 2.5N/2 GE
ZQV 2.5N/3 GE
ZQV 2.5N/4 GE
ZQV 2.5N/10 GE
ZQV 2.5N/50 GE
Dark beige Wemid
Blue Wemid
Orange PA
ZAP/TW ZDUA2.5-2N
Standard
SDIS SL 0.6X3.5X100
ZEW 15
(see assortment in catalogue 7)
Marking tags
DEK 5/5 / WS 10/5
current
24 A
24 A
24 A
24 A
24 A
Width
2.5 mm
5 mm
5 mm
Order No.
DEK 5/5 / WS 10/5
Note
C.118
1282250000 – 2012/2013
Terminals, Z-Series
C
1282250000 – 2012/2013
C.119
Terminals with electronic components
Terminals, Z-Series
ZDU 2.5/2x2AN/LD+
Z-series standard ranges provide solutions for conductor
cross-sections from 0.05 to 35 mm².
2.5 mm²
LED indicator
ZDU 2.5/2x2AN/LD-
2.5 mm²
LED indicator
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 79.5 x 39.5
/4
0.05...4
5.1 x 79.5 x 39.5
/4
0.05...4
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Electronic fixtures
Component voltage / Component current
Operating voltage for display, max. / Current
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
IEC
24
0.05
2.5
V
A
mm²
IEC 60947-7-1
UL
CSA
IEC
24
0.05
2.5
6 kV / 3
A3 / V-0
V/A
V/A
mm²
mm²
mm/-
UL
CSA
6 kV / 3
A3 / V-0
#
#
24 / 0.05
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
24 / 0.05
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
Note
Ordering data
Version
Dark beige Wemid
Dark beige Wemid (red LED)
Orange
Type
Qty.
ZDU 2.5/2X2AN/LD+
Order No.
Type
20
1692590000
ZDU 2.5/2X2AN/LD-
Qty.
Order No.
Type
Qty.
Order No.
20
1692600000
Qty.
Order No.
Note
Accessories
Pluggable cross-connection
End plate / Partition plate
End bracket
Test adapter
Screwdriver
Reducing sleeves
Identification systems
2-pole
3-pole
4-pole
10-pole
20-/24-pole
Type
current
Width
current
Width
Blue Wemid
Dark beige Wemid
ZAP/TW 3
2 mm
50
1608800000
ZAP/TW 3
2 mm
50
1608800000
Dark beige Wemid
ZEW 35
6 mm
20
9540000000
ZEW 35
6 mm
20
9540000000
1
1274660000
SDIS SL 0.6X3.5X100
1
1274660000
5.55 mm 1000
5.55 mm 1000
1614300000
1614290000
ZRH 2.5/1 WS
ZRH 2.5/2 GR/V0
5.55 mm 1000
5.55 mm 1000
1614300000
1614290000
With assembly peg
Standard
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
(see assortment in catalogue 7)
Marking tags
SDIS SL 0.6X3.5X100
ZRH 2.5/1 WS
ZRH 2.5/2 GR/V0
DEK 5/5 / WS 10/5
DEK 5/5 / WS 10/5
Note
C.120
1282250000 – 2012/2013
Terminals with electronic components
ZDU 2.5/2x2AN/D+
2.5 mm²
2.5 mm²
Diode circuit
5.1 x 79.5 x 39.5
/4
0.5...4
5.1 x 79.5 x 39.5
/4
0.5...4
IEC 60947-7-1
IEC
400
1
2.5
ZDU 2.5/2x2AN/D-
Terminals, Z-Series
Diode circuit
C
IEC 60947-7-1
UL
CSA
IEC
400
1
2.5
6 kV / 3
A3 / V-0
CSA
6 kV / 3
A3 / V-0
#
#
1000 / 1
1000 / 1
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
Rated connection
0.5...4
0.5...4 / 0.5...2.5
10 / 0.6 x 3.5 mm
Type
ZDU 2.5/2X2AN/D+
UL
Qty.
20
Order No.
1650340000
Type
ZDU 2.5/2X2AN/D-
Qty.
20
Order No.
1650350000
Soldered in diode: type 1N 4007, cut-off voltage 1000 V, current 1 A.
Soldered in diode: type 1N 4007, cut-off voltage 1000 V, current 1 A.
Type
Type
current
Qty.
Order No.
Width
current
Qty.
Order No.
Width
ZAP/TW 3
2 mm
50
1608800000
ZAP/TW 3
2 mm
50
1608800000
ZEW 35
6 mm
20
9540000000
ZEW 35
6 mm
20
9540000000
1
1274660000
SDIS SL 0.6X3.5X100
1
1274660000
5.55 mm 1000
5.55 mm 1000
1614300000
1614290000
ZRH 2.5/1 WS
ZRH 2.5/2 GR/V0
5.55 mm 1000
5.55 mm 1000
1614300000
1614290000
SDIS SL 0.6X3.5X100
ZRH 2.5/1 WS
ZRH 2.5/2 GR/V0
DEK 5/5 / WS 10/5
1282250000 – 2012/2013
DEK 5/5 / WS 10/5
C.121
Terminals with electronic components
Terminals, Z-Series
ZDU 2.5-2/D+
Z-series standard ranges provide solutions for conductor
cross-sections from 0.05 to 35 mm².
2.5 mm²
Diode circuit
ZDU 2.5-2/D-
2.5 mm²
Diode circuit
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 50.5 x 44
/ 2.5
0.05...2.5
5.1 x 50.5 x 44
/ 2.5
0.05...2.5
IEC 60947-7-1
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Electronic fixtures
Component voltage / Component current
Operating voltage for display, max. / Current
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
V
A
mm²
V/A
V/A
mm²
mm²
mm/-
Note
IEC
400
1
2.5
UL
CSA
600 (C)
600 (C)
1 (C)
1 (C)
AWG 26...12
AWG 26...12
6 kV / 3
A2 / V-0
IEC
400
1
2.5
UL
CSA
600 (C)
600 (C)
1 (C)
1 (C)
AWG 26...12
AWG 26...12
6 kV / 3
A2 / V-0
ru#ia
ru#ia
1000 / 1
1000 / 1
Rated connection
0.5...2.5
0.5...2.5 / 0.5...1.5
10 / 0.6 x 3.5 mm
Rated connection
0.5...2.5
0.5...2.5 / 0.5...1.5
10 / 0.6 x 3.5 mm
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
Type
ZDU 2.5-2/D+
Type
ZDU 2.5-2/D-
Ordering data
Version
Dark beige Wemid
Dark beige Wemid (red LED)
Orange
Note
Qty.
20
Order No.
1779110000
Qty.
20
Order No.
1779000000
Soldered in diode: type 1N 4007, cut-off voltage 1000 V, current 1 A.
Soldered in diode: type 1N 4007, cut-off voltage 1000 V, current 1 A.
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
current
24 A
24 A
24 A
24 A
24 A
Width
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
Blue Wemid
Dark beige Wemid
current
24 A
24 A
24 A
24 A
24 A
Width
ZAP/TW7
2.5 mm
50
1706110000
ZAP/TW7
2.5 mm
50
1706110000
Dark beige Wemid
ZEW 35
6 mm
20
9540000000
ZEW 35
6 mm
20
9540000000
1
1274660000
SDIS SL 0.6X3.5X100
1
1274660000
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
ZRH 1.5H/1
ZRH 1.5H/2
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
Accessories
Pluggable cross-connection
End plate / Partition plate
End bracket
Test adapter
Screwdriver
Reducing sleeves
Identification systems
2-pole
3-pole
4-pole
10-pole
20-/24-pole
With assembly peg
Standard
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
(see assortment in catalogue 7)
Marking tags
SDIS SL 0.6X3.5X100
ZRH 1.5H/1
ZRH 1.5H/2
DEK 5/5 / WS 14/5
DEK 5/5 / WS 14/5
Note
C.122
1282250000 – 2012/2013
Terminals with electronic components
2.5 mm²
Double-level terminal
IEC 60947-7-1
r#a
2.5 mm²
LED circuit
5.1 x 79.5 x 54
20 / 2.5
0.05...2.5
IEC
500
20
2.5
ZDK 2.5/LD RT/1
Ex e II
T
II 2 G D
5.1 x 79.1 x 54
/ 2.5
0.05...2.5
IEC 60947-7-1
IEC
24
10
2.5
2.5 mm²
LED circuit
5.1 x 79.1 x 54
/ 2.5
0.05...2.5
UL
CSA
EN 60079-7
300 (C)
300 (C)
275
15 (C)
25 (C)
18
AWG 26...14
AWG 26...12
2.5
6 kV / 3
A2 / V-0
KEMA 97ATEX4677 U
ZDK 2.5/LD RT/2
Terminals, Z-Series
ZDK 2.5 EM
C
IEC 60947-7-1
UL
CSA
IEC
24
10
2.5
AWG 26...14
AWG 26...12
/3
A2 / V-0
UL
CSA
AWG 26...14
AWG 26...12
/3
A2 / V-0
r#ia
r#ia
Rated connection
0.5...2.5
0.5...2.5 / 0.5...2.5
10 / 0.6 x 3.5 mm
24 / 0.05
Rated connection
0.5...2.5
0.5...2.5 / 0.5...1.5
10 / 0.6 x 3.5 mm
24 / 0.05
Rated connection
0.5...2.5
0.5...2.5 / 0.5...1.5
10 / 0.6 x 3.5 mm
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
2.5 mm² flexible conductors with wire-end ferrules are crimped with the Weidmüller PZ 6/5 crimping tool.
2.5 mm² flexible conductors with wire-end ferrules are crimped with the Weidmüller PZ 6/5 crimping tool.
Type
ZDK 2.5 EM
Qty.
50
Order No.
1768800000
Type
Order No.
Type
50
1694140000
1690010000
ZDK 2.5/LD RT/2
ZDK 2.5 OR
Qty.
ZDK 2.5/LD RT/1
50
Empty electronics enclosure for do-it-yourself soldering of components.
Voltage on the continuous busbar = 10 A.
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
ZAP/TW ZDK2.5 BL
ZAP/TW ZDK2.5
ZEW 35
ZTA 4
SDIS SL 0.6X3.5X100
ZRH 1.5H/1
ZRH 1.5H/2
Qty.
Order No.
50
1693940000
Voltage on the continuous busbar = 10 A.
current
24 A
24 A
24 A
24 A
24 A
Width
1.5 mm
1.5 mm
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
1748800000
1674730000
current
24 A
24 A
24 A
24 A
24 A
Width
Qty.
60
60
60
20
20
20
20
current
24 A
24 A
24 A
24 A
24 A
Width
ZAP/TW ZDK2.5
1.5 mm
20
1674730000
ZAP/TW ZDK2.5
1.5 mm
20
1674730000
6 mm
20
9540000000
ZEW 35
6 mm
20
9540000000
ZEW 35
6 mm
20
9540000000
5.1 mm
25
1688110000
1
1274660000
SDIS SL 0.6X3.5X100
1
1274660000
SDIS SL 0.6X3.5X100
1
1274660000
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
ZRH 1.5H/1
ZRH 1.5H/2
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
ZRH 1.5H/1
ZRH 1.5H/2
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
DEK 5/5 / WS 12/5
DEK 5/5 / WS 10/5
DEK 5/5 / WS 10/5
ZVQ 2.5/15 (1720700000) connects two busbars, one above the other.
1282250000 – 2012/2013
C.123
Terminals with electronic components
Terminals, Z-Series
ZDK 2.5/D/1
Z-series standard ranges provide solutions for conductor
cross-sections from 0.05 to 35 mm².
2.5 mm²
Diode circuit
ZDK 2.5/D/2
2.5 mm²
Diode circuit
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
5.1 x 79.1 x 54
/ 2.5
0.05...2.5
5.1 x 79.1 x 54
/ 2.5
0.05...2.5
IEC 60947-7-1
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Electronic fixtures
Component voltage / Component current
Operating voltage for display, max. / Current
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
V
A
mm²
V/A
V/A
mm²
mm²
mm/-
Note
IEC
500
10
2.5
UL
CSA
300 (C)
300 (D)
15 (C)
10 (D)
AWG 26...14
AWG 26...12
6 kV / 3
A2 / V-0
IEC
500
10
2.5
UL
CSA
300 (C)
300 (D)
15 (C)
10 (D)
AWG 26...14
AWG 26...12
6 kV / 3
A2 / V-0
r#ia
r#ia
1000 / 1
1000 / 1
Rated connection
0.5...2.5
0.5...2.5 / 0.5...1.5
4 / 0.6 x 3.5 mm
Rated connection
0.5...2.5
0.5...2.5 / 0.5...1.5
10 / 0.6 x 3.5 mm
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
Type
ZDK 2.5/D/1
Type
ZDK 2.5/D/2
Ordering data
Version
Dark beige Wemid
Dark beige Wemid (red LED)
Orange
Note
Qty.
50
Order No.
1690020000
Qty.
50
Order No.
1690030000
Soldered diode: Type 1N 4007, reverse voltage 1000 V, current 1 A; current of
continuous current bar = 10 A.
Soldered diode: Type 1N 4007, reverse voltage 1000 V, current 1 A; current of
continuous current bar = 10 A.
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
current
24 A
24 A
24 A
24 A
24 A
Width
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
Blue Wemid
Dark beige Wemid
current
24 A
24 A
24 A
24 A
24 A
Width
ZAP/TW ZDK2.5
1.5 mm
20
1674730000
ZAP/TW ZDK2.5
1.5 mm
20
1674730000
Dark beige Wemid
ZEW 35
6 mm
20
9540000000
ZEW 35
6 mm
20
9540000000
1
1274660000
SDIS SL 0.6X3.5X100
1
1274660000
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
ZRH 1.5H/1
ZRH 1.5H/2
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
Accessories
Pluggable cross-connection
End plate / Partition plate
End bracket
Test adapter
Screwdriver
Reducing sleeves
Identification systems
2-pole
3-pole
4-pole
10-pole
20-/24-pole
With assembly peg
Standard
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
(see assortment in catalogue 7)
Marking tags
SDIS SL 0.6X3.5X100
ZRH 1.5H/1
ZRH 1.5H/2
DEK 5/5 / WS 10/5
DEK 5/5 / WS 10/5
Note
C.124
1282250000 – 2012/2013
Terminals with electronic components
2.5 mm²
Diode circuit
2.5 mm²
Diode circuit
5.1 x 79.1 x 54
/ 2.5
0.05...2.5
IEC
500
10
2.5
2.5 mm²
5.1 x 79.1 x 54
/ 2.5
0.05...2.5
IEC 60947-7-1
UL
CSA
300 (C)
300 (D)
15 (C)
10 (D)
AWG 26...14
AWG 26...12
6 kV / 3
A2 / V-0
ZDK 2.5/D/6
Diode circuit
5.1 x 79.1 x 54
/ 2.5
0.05...2.5
IEC 60947-7-1
IEC
500
10
2.5
ZDK 2.5/D/5
Terminals, Z-Series
ZDK 2.5/D/4
C
IEC 60947-7-1
UL
CSA
300 (C)
300 (D)
15 (C)
10 (D)
AWG 26...14
AWG 26...12
6 kV / 3
A2 / V-0
IEC
500
10
2.5
UL
CSA
300 (C)
300 (D)
15 (C)
10 (D)
AWG 26...14
AWG 26...12
6 kV / 3
A2 / V-0
r#ia
r#ia
r#ia
1000 / 1
1000 / 1
1000 / 1
Rated connection
0.5...2.5
0.5...2.5 / 0.5...1.5
10 / 0.6 x 3.5 mm
Rated connection
0.5...2.5
0.5...2.5 / 0.5...1.5
10 / 0.6 x 3.5 mm
Rated connection
0.5...2.5
0.5...2.5 / 0.5...1.5
10 / 0.6 x 3.5 mm
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
Type
ZDK 2.5/D/4
Type
ZDK 2.5/D/5
Type
ZDK 2.5/D/6
Qty.
50
Order No.
1690040000
Qty.
50
Order No.
1690050000
Qty.
50
Order No.
1690060000
Soldered diode: Type 1N 4007, reverse voltage 1000 V, current 1 A; current of
continuous current bar = 10 A.
Soldered diode: Type 1N 4007, reverse voltage 1000 V, current 1 A; current of
continuous current bar = 10 A.
Soldered diode: Type 1N 4007, reverse voltage 1000 V, current 1 A; current of
continuous current bar = 10 A.
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
current
24 A
24 A
24 A
24 A
24 A
Width
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
current
24 A
24 A
24 A
24 A
24 A
Width
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
current
24 A
24 A
24 A
24 A
24 A
Width
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
ZAP/TW ZDK2.5
1.5 mm
20
1674730000
ZAP/TW ZDK2.5
1.5 mm
20
1674730000
ZAP/TW ZDK2.5
1.5 mm
20
1674730000
6 mm
20
9540000000
ZEW 35
6 mm
20
9540000000
ZEW 35
6 mm
20
9540000000
1
1274660000
SDIS SL 0.6X3.5X100
1
1274660000
SDIS SL 0.6X3.5X100
1
1274660000
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
ZRH 1.5H/1
ZRH 1.5H/2
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
ZRH 1.5H/1
ZRH 1.5H/2
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
ZEW 35
SDIS SL 0.6X3.5X100
ZRH 1.5H/1
ZRH 1.5H/2
DEK 5/5 / WS 10/5
1282250000 – 2012/2013
DEK 5/5 / WS 10/5
DEK 5/5 / WS 10/5
C.125
Terminals with electronic components
ZDK 4-2 EL
4 mm²
Terminals, Z-Series
Double-level terminal
ZDK 4-2/D forward
4 mm²
Diode circuit
In hazardous area applications, the installation instructions and the rated data specifications for accessories given in the technical appendix
must be followed.
C
Width/Length/Height of lowest version
max. current / max. cond. cross-section
Max. clamping range
mm
A/mm²
mm²
Technical data
6.1 x 77.6 x 61
32 / 6
0.13...6
6.1 x 77.6 x 60.5
/6
0.13...6
IEC 60947-7-1
IEC 60947-7-1
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse withstand voltage / Pollution severity
Gauge to IEC 60947-1 / Flammability class UL94
Approvals
Electronic fixtures
Component voltage / Component current
Operating voltage for display, max. / Current
Clamped conductors (H05V/H07V)
Solid / stranded
Flexible / Flexible with ferrule
Stripping length / Blade size
IEC
800
32
4
V
A
mm²
UL
CSA
600 (C)
25 (C)
AWG 26...10
8 kV / 3
A3 / V-0
IEC
800
1
4
a
V/A
V/A
mm²
mm²
mm/-
UL
CSA
600 (C)
600 (C)
1 (C)
1 (C)
AWG 26...10
AWG 26...10
8 kV / 3
A3 / V-0
r#a
1000 / 1
Rated connection
0.5...6 / 1.5...4
0.5...4 / 0.5...4
10 / 0.6 x 3.5 mm
Rated connection
0.5...6
0.5...4 / 0.5...4
10 / 0.6 x 3.5 mm
Note
Ordering data
Version
Dark beige Wemid
Dark beige Wemid (red LED)
Orange
Type
ZDK 4-2 EL
Qty.
50
Order No.
8709760000
Note
Type
ZDK 4-2/D forward
Qty.
50
Order No.
8670520000
Soldered diode: Type 1N 4007, reverse voltage 1000 V, current 1 A; current of
continuous current bar = 10 A.
Accessories
Pluggable cross-connection
End plate / Partition plate
End bracket
Test adapter
Screwdriver
Reducing sleeves
Identification systems
2-pole
3-pole
4-pole
10-pole
20-/24-pole
Type
ZQV 4/2 GE
ZQV 4/3 GE
ZQV 4/4 GE
ZQV 4/10 GE
current
32 A
32 A
32 A
32 A
Qty.
60
60
60
20
Order No.
1608950000
1608960000
1608970000
1609030000
Type
ZQV 4/2 GE
ZQV 4/3 GE
ZQV 4/4 GE
ZQV 4/10 GE
ZQV 4/20 GE
current
32 A
32 A
32 A
32 A
32 A
Width
Qty.
60
60
60
20
20
Order No.
1608950000
1608960000
1608970000
1609030000
1909010000
Blue Wemid
Dark beige Wemid
ZAP/TW ZDK4-2 BL
ZAP/TW ZDK4-2
Width
2 mm
2 mm
50
50
8670620000
8670760000
ZAP/TW ZDK4-2
2 mm
50
8670760000
Dark beige Wemid
ZEW 35
6 mm
20
9540000000
ZEW 35
6 mm
20
9540000000
With assembly peg
ZTA 6/ZA
6.1 mm
25
1780660000
1
1274660000
1
1274660000
Standard
SDIS SL 0.6X3.5X100
SDIS SL 0.6X3.5X100
For conductors < 0.5 mm² / AWG 20
For conductors < 1.0 mm² / AWG 18
(see assortment in catalogue 7)
Marking tags
DEK 5/6
Note
C.126
1282250000 – 2012/2013
Terminals with electronic components
ZDK 2.5/3AN D2
4 mm²
Terminals, Z-Series
Diode circuit
5.1 x 93 x 51.5
/4
0.05...4
C
IEC 60947-7-1
IEC
500
1
4
UL
CSA
300 (C)
300 (C)
20 (C)
24 (C)
AWG 30...12
AWG 30...12
6 kV / 3
A2 / V-0
r{u#
1000 / 1
Rated connection
0.5...4 / 1.5...2.5
0.5...2.5 / 0.21...2.5
10 / 0.6 x 3.5 mm
2.5 mm² flexible wires with wire-end ferrules are crimped with the Weidmüller
PZ 6/5 crimping tool.
Type
ZDK 2.5/3AN D2
Qty.
50
Order No.
1924450000
Soldered diode: Type 1N 4007, reverse voltage 1000 V, current 1 A; current of
continuous current bar = 10 A.
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/10
ZQV 2.5/20
current
24 A
24 A
24 A
24 A
24 A
Width
Qty.
60
60
60
20
20
Order No.
1608860000
1608870000
1608880000
1608940000
1908960000
ZAP/TW ZDK 2.5/3AN
1.5 mm
20
1924910000
8 mm
20
8630740000
1
1274660000
4.85 mm 1000
4.85 mm 1000
1678810000
1678800000
ZEW 35/2
SDIS SL 0.6X3.5X100
ZRH 1.5H/1
ZRH 1.5H/2
DEK 5/5 / WS 10/5
2.5 mm² wires with wire ferrules including the plastic collar only clampable with
diameter-optimised collar (Order no. 1333100000, pack of 500).
1282250000 – 2012/2013
C.127
Terminals, Z-Series
Accessories Z-Series
Extra functions
Extra functions
C
Weidmüller offers the user of Z-Series
terminals a comprehensive range
of accessories, providing optimum
solutions to every conceivable task
– even outside the range of standard
uses. All Weidmüller accessories are
built to the same high standards as the
terminals themselves.
Visual separation
Page C.130
To guarantee “finger-safe” use of
terminals, the open sides are covered
with end cover plates and partition
plates to prevent any contact with
conducting parts.
End cover plates and partition plates
also come in different colours so that
they can be used for visual separation
of different circuits.
Pluggable terminals
Page C.100
WeiCoS
Weidmüller Connection System
This new generation of pluggable
terminals is structured on the modular
principle. The basic elements of the
WeiCoS system are one terminal for
the functional unit on the mounting rail
and a plug-in connector for elements
to be connected (cable harness
production).
C.128
1282250000 – 2012/2013
Terminals, Z-Series
Accessories Z-Series
Fastening
Chapter F
Electrical supply
Page C.134
Electrical distribution
Page C.136
C
An end bracket is fitted on the
mounting rail to the right and left of the
terminals to ensure that they sit firmly
in position.
The marking surface of the end bracket
can also be used for group marking.
Details of the wide range of Weidmüller
end brackets and mounting rails are
given in chapter F.
Weidmüller‘s tension clamp terminals
have three supply terminals:
ZEI 16 for standard terminals
ZEI 16-2/1 AN for Roof-Style terminals
ZEI 6 for ZDU 1.5
Cross-connections divide the supply
current into several feeder currents.
Current is supplied across a conductor
cross-section of 16 mm2 and then
distributed across neighbouring
terminals for 1.5 mm2, 2.5 mm2, 4 mm2
and 6 mm2 cross-sectional areas.
A plug-in cross-connection system
(ZQV) is available for all Z-Series
terminals.
The current is distributed across any
number of terminals by simply plugging
the cross-connection into the middle of
the terminals. As a rule, 400 V can be
transmitted across the cross-section,
depending on the rated voltage of the
terminal.
Testing / checking
Indentification and connecting
Page C.146
Specific functions/
colour variations
Weidmüller‘s identification systems in
chapter F are used to mark tension
clamp terminals. Individual terminals,
terminal groups and conductors can be
marked. The conductors are connected
in the tension clamp terminals with
standard screwdrivers, as shown
in chapter F. As an alternative to
screwdrivers, fully insulated operating
tools are also available; see page
D.146.
Further helpful accessories are
available for terminals using tension
clamp technology, such as:
• Pluggable extra connections (ZZA)
•Housings for installation of
electronic components (ZBS 1)
•Pluggable fuse holder
(SIHA 1 to SIHA 3)
• Terminals in various colours.
• Accessories for fuses
• Reducing sleeves
Page C.142
The slot-in test adapter (ZTA) is used
as a single unit and as a test adapter
strip for voltage measurement in
control cabinets. The test adapter is
ideal for convenient, rational testing
of assembled terminals. It is simply
slotted onto the terminal. This creates
contact with the current carrying
busbar. The unit is released from the
terminal simply by pressing the release
button.
1282250000 – 2012/2013
Page C.152
C.129
Accessories Z-Series – Optical separation
Terminals, Z-Series
End plates
... for standard terminals
Type
Width
2 mm
ZAP/TW ZDU1.5/2AN
ZAP/TW ZDU1.5/2AN BL
ZAP/TW ZDU1.5/2AN OR
Width
2 mm
ZAP/TW ZDU1.5/3AN
ZAP/TW ZDU1.5/3AN BL
ZAP/TW ZDU1.5/3AN OR
Width
2 mm
ZAP/TW ZDU1.5/4AN
ZAP/TW ZDU1.5/4AN BL
ZAP/TW ZDU1.5/4AN OR
Width
2 mm
ZAP/TW ZDK1.5
ZAP/TW ZDK1.5 BL
C
Touch-safe protection
The last terminal in a terminal strip must be closed off with a ZAP/TW-type end
plate. End plates must also be used within a terminal strip when it makes use of
terminals of different sizes. This ensures that the touch-safe requirement is met
for live-voltage components and that the terminals are touch-safe.
Optical separation
Coloured end plates are frequently used for distinguishing the circuits.
Ensuring the operating voltage
End plates can also be used to maintain the required clearance and creepage
distances, in order to guarantee the rated voltage for the application. They can be
used when cross-connections are used side-by-side.
Width
2 mm
ZAP/TW 1
ZAP/TW 1 BL
ZAP/TW 1 GN
ZAP/TW 1 GR
ZAP/TW 1 OR
ZAP/TW 1 RT
ZAP/TW 1 SW
Width
2 mm
ZAP/TW 2 DB
ZAP/TW 2 BL
ZAP/TW 2 GN
ZAP/TW 2 OR
ZAP/TW 2 RT
Width
2 mm
ZAP/TW 3
ZAP/TW 3 BL
ZAP/TW 3 GN
ZAP/TW 3 GR
ZAP/TW 3 OR
ZAP/TW 3 RT
ZAP/TW 3 SW
ZAP/TW 3 WS
Colour
Qty.
beige
blue
orange
20
20
20
1776030000 ZDU 1.5
1776040000 ZDU 1.5 BL
1776050000 ZPE 1.5
beige
blue
orange
20
20
20
1776060000 ZDU 1.5/3 AN
1776070000 ZDU 1.5/3 AN/BL
1776080000 ZPE 1.5/3AN
beige
blue
orange
20
20
20
1776090000 ZDU 1.5 2X2AN
1776100000 ZDU 1.5 2X2AN BL
1776110000 ZDU 1.5/4 AN
ZDU 1.5/4 AN/BL
ZPE 1.5/4AN
dark beige
blue
20
20
1791160000 ZDK 1.5
1791170000 ZDK 1.5 BL
ZDK 1.5 PE
ZDK 1.5DU-PE
ZDK 1.5V
ZDK 1.5V BL
dark beige
blue/light blue
green
grey
orange
red
black
50
50
50
50
50
50
50
1608740000
1608750000
1683680000
1683710000
1608760000
1683660000
1683730000
dark beige
blue/light blue
green
orange
red
50
50
50
50
50
1608770000 ZDU 2.5/3AN
1608780000 ZDU 2.5/3AN BL
1683760000 ZPE 2.5/3AN
1608790000
1683740000
dark beige
blue/light blue
green
grey
orange
red
black
white
50
50
50
50
50
50
50
50
1608800000
1608810000
1683840000
1683870000
1608820000
1683820000
1683890000
1683880000
dark beige
blue/light blue
orange
20
20
20
1674730000 ZDK 2.5
1748800000 ZDK 2.5/D/1
1690080000 ZDK 2.5/D/2
ZDK 2.5/D/4
ZDK 2.5/D/5
ZDK 2.5/D/6
ZDK 2.5/LD RT/1
ZDK 2.5/LD RT/2
ZDK 2.5V
ZDK 2.5 BL
ZDK 2.5 DU-PE
ZDK 2.5 EM
ZDK 2.5 N-DU
ZDK 2.5 N-PE
ZDK 2.5 OR
ZDK 2.5 PE
ZDK 2.5 V BL
Contour matching
The overall dimensions of the end plates match the external dimensions of the
associated terminal.
Mounting
The end plate‘s snap-in pegs allow it to be simply fitted on to the corresponding
terminal. The corresponding indentations in the terminal are used to ensure that
position follows the identical contours.
Width
1.5 mm
ZAP/TW ZDK2.5
ZAP/TW ZDK2.5 BL
ZAP/TW ZDK2.5 OR
C.130
Order No.
For terminal:
ZDU 2.5
ZDU 2.5 BL
ZPE 2.5
ZTR 2.5
ZTR 2.5 BL
ZTR 2.5/O. TNHE
ZDU 2.5/2X2AN
ZSI 2.5
ZSI 2.5/5X25
ZSI 2.5/LD 120AC
ZSI 2.5/LD 250AC
ZSI 2.5/LD 28AC
ZSI 2.5/LD 60AC
ZTR 2.5/3AN
ZTR 2.5/3AN BL
ZTR 2.5/3AN/O.TNHE
ZTR 2.5/4AN
ZDU 2.5/2X2AN BL
ZTR 2.5/4AN BL
ZTR 2.5/4AN/O TNHE
ZDU 2.5/2X2AN/D+
ZDU 2.5/2X2AN/DZDU 2.5/2X2AN/LD+
ZDU 2.5/2X2AN/LDZDU 2.5/4AN
ZDU 2.5/4AN BL
ZPE 2.5/4AN
1282250000 – 2012/2013
... for standard terminals
Type
Width
1.5 mm
ZAP/TW ZDLD2.5-2N
ZAP/TW ZDLD2.5-2N BL
ZAP/TW ZDLD2.5-2N OR
Width
1.5 mm
ZAP ZMAK2.5
Width
1.5 mm
AP ZDTR2.5
AP ZDTR2.5 BL
Width
2 mm
ZAP/TW 4 BL
ZAP/TW 4
ZAP/TW 4 GN
ZAP/TW 4 OR
Width
2 mm
ZAP/TW 4/3AN BL
ZAP/TW 4/3AN OR
ZAP/TW 4/3AN
Width
2 mm
ZAP/TW4/4AN
ZAP/TW4/4AN BL
ZAP/TW4/4AN OR
Width
2 mm
ZAP/TW 5
ZAP/TW 5 BL
ZAP/TW 5 OR
Width
2 mm
ZAP/TW6/3AN BL
ZAP/TW6/3AN OR
ZAP/TW6/3AN
Width
2.7 mm
ZAP/TW ZDU10
ZAP/TW ZDU10 BL
Width
3 mm
ZAP/TW 10/16
ZAP/TW 10/16 BL
Width
3 mm
ZAP/TW ZDU16
ZAP/TW ZDU16 BL
... for roof-style terminals
Type
Width
2.5 mm
ZAP/TW7
ZAP/TW7 BL
ZAP/TW7 OR
Width
2 mm
ZAP/TW ZDK2.5-2
ZAP/TW ZDK2.5-2 BL
ZAP/TW ZDK2.5-2 OR
1282250000 – 2012/2013
Colour
dark beige
blue
orange
Qty.
20
20
20
Order No.
For terminal:
1782340000 ZDLD 2.5-2 N/BL
1782350000 ZDLD 2.5-2 VN
1782360000 ZDLD 2.5-2 VN/BL
ZDLD 2.5-2 N
dark beige
10
1768010000 ZMAK 2.5
dark beige
blue
20
20
1745420000 ZDTR 2.5
1798340000 ZDTR 2.5 BL
blue/light blue
dark beige
green
orange
50
50
50
50
1632100000 ZDU 4
1632090000 ZDU 4 BL
1683920000 ZPE 4
1632110000
blue
orange
dark beige
20
20
20
7904110000 ZDU 4/3AN
7904120000 ZDU 4/3AN BL
7904100000 ZPE 4/3AN
dark beige
blue
orange
20
20
20
7904210000 ZDU 4/4AN
7904220000 ZDU 4/4AN BL
7904230000 ZPE 4/4AN
dark beige
blue/light blue
orange
50
50
50
1608830000 ZDU 6
1608840000 ZDU 6 BL
1608850000 ZPE 6
blue
orange
dark beige
20
20
20
7907380000 ZDU 6/3AN
7907390000 ZDU 6/3AN BL
7907370000 ZPE 6/3AN
beige
blue/light blue
20
20
1748660000 ZDU 10
1764110000 ZDU 10 BL
ZPE 10
beige
blue
20
20
1749580000 ZDU 10/3AN
1768520000 ZDU 10/3AN BL
ZDU 16/3AN
ZDU 16/3AN BL
ZPE 10/3AN
ZPE 16/3AN
dark beige
blue/light blue
Colour
20
20
Qty.
1745150000 ZDU 16
1764100000 ZDU 16 BL
ZPE 16
Order No.
For terminal:
dark beige
blue/light blue
orange
50
50
50
1706110000 ZDU 2.5-2
1706120000 ZDU 2.5-2 BL
1706130000 ZDU 2.5-2/3AN
ZDU 2.5-2/3AN BL
ZDU 2.5-2/4AN
ZDU 2.5-2/4AN BL
ZDU 2.5-2/D+
ZDU 2.5-2/DZPE 2.5-2
ZPE 2.5-2/3AN
ZPE 2.5-2/4AN
ZTR 2.5-2
ZTR 2.5-2 BL
ZTR 2.5-2/O.TNHE
dark beige
blue
orange
20
20
20
1791050000 ZDK 2.5-2
1791060000 ZDK 2.5-2 BL
1791070000 ZDK 2.5-2 PE
ZDK 2.5V
ZDK 2.5V BL
... for roof-style terminals
Type
Width
2 mm
ZAP/TW ZDKPE2.5-2
Width
2 mm
ZAP ZDU4-2
ZAP ZDU4-2 BL
ZAP ZDU4-2 OR
Width
2 mm
ZAP ZDU4-2/4AN
ZAP ZDU4-2/4AN BL
ZAP ZDU4-2/4AN OR
Width
2.5 mm
ZAP ZDU6-2
ZAP ZDU6-2 BL
ZAP ZDU6-2 OR
ZAP ZDU6-2 SW
Width
2.5 mm
ZAP/Z...16-2/1AN
Colour
Order No.
For terminal:
dark beige
25
1805960000 ZDKPE 2.5-2
ZDKPE 2.5-2/N/L/PE
dark beige
blue
orange
50
50
50
1770400000 ZDU 4-2/2AN
1770880000 ZDU 4-2/2AN BL
1770890000 ZDU 4-2/3AN
ZDU 4-2/3AN BL
ZDU 4-2/3AN LSC
ZPE 4-2/2AN
ZPE 4-2/3AN
dark beige
blue
orange
50
50
50
1807010000 ZDU 4-2/4AN
1807020000 ZDU 4-2/4AN BL
1807030000 ZPE 4-2/4AN
dark beige
blue
orange
black
50
50
50
50
1771440000
1771450000
1771460000
1814710000
dark beige
10
1772970000 ZPE 16-2/1AN
... for initiator-actuator terminals
Type
Width
5.1 mm
ZAP/TW ZPV1.5
Qty.
Colour
dark beige
Qty.
50
Order No.
ZDU 6-2/2AN
ZSI 6-2 2X2.5/G20
ZSI 6-2 2X2.5/G20/LD1
ZSI 6-2 2X2.5/G20/LD2
ZSI 6-2 2X2.5/G20/LD3
ZSI 6-2 2X2.5/G20/LD4
ZSI 6-2/FC
ZSI 6-2/FC LD
ZTR 6-2
ZTR 6-2 E / 230V UC
ZTR 6-2 E / 24V DC
ZDU 6-2/2AN BL
ZDU 6-2/3AN
ZDU 6-2/3AN BL
ZPE 6-2/2AN
ZPE 6-2/3AN
ZSI 2.5-2/2X2AN/G20
ZSI 2.5-2/2X2AN/G20/LD1
ZSI 2.5-2/2X2AN/G20/LD2
C
For terminal:
1674650000 ZAP/TW ZPV1.5
ZPV 1.5
Width
5.1 mm
ZAP/TW ZIA1.5/3L
beige
Width
5.1 mm
ZAP/TW ZIA1.5/4L
1649540000 ZIA 1.5/3L-1S
ZIA 1.5/3L-1S/LD
ZIA 1.5/3L-PE
beige
Width
5 mm
AP ZRV1.5 DB
1649550000 ZIA 1.5/4L-1S
ZIA 1.5/4L-1S/LD
ZIA 1.5/4L-PE
dark beige
10
Terminals, Z-Series
Accessories Z-Series – Optical separation
1698180000
C.131
Accessories Z-Series – Optical separation
Terminals, Z-Series
... for installations terminals
C
C.132
Type
Width
2 mm
ZAP ZDU10/16S
Colour
dark beige
Qty.
20
Order No.
For terminal:
1739660000 ZDU 10/NT
ZDU 10S
ZDU 10S BL
ZDU 16S
ZDU 16S BL
ZNT 10S
ZNT 16S
ZPE 10S
ZPE 16S
Width
2 mm
ZAP ZDU 2.5 S
ZAP ZDU 2.5 S BL
ZAP ZDU 2.5 S OR
dark beige
blue
orange
20
20
20
Width
2 mm
ZAP ZDU 4 S
ZAP ZDU 4 S BL
1808030000 ZDU 2.5 S
1808040000 ZDU 2.5 S BL
1808050000 ZNT 2.5 S
ZPE 2.5 S
dark beige
blue
20
20
Width
2 mm
ZAP ZDU 6 S
ZAP ZDU 6 S BL
1808380000 ZDU 4 S
1808390000 ZDU 4 S BL
ZNT 4 S
ZPE 4 S
dark beige
blue
20
20
Width
ZHP S
ZHP S SO
1808250000 ZDU 6 S
1808260000 ZDU 6 S BL
ZNT 6 S
ZPE 6 S
blue
blue
20
20
1808290000 ZDU 2.5 S
1808280000 ZPE 2.5 S
ZPE 4 S
ZPE 6 S
ZDU 2.5 S BL
ZDU 4 S
ZDU 4 S BL
ZDU 6 S
ZDU 6 S BL
ZNT 2.5 S
ZNT 4 S
ZNT 6 S
3 mm
... for mini-terminals
Type
Width
1.5 mm
ZAP/TW ZDUA
ZAP/TW ZDUA BL
ZAP/TW ZDUA OR
Width
2.5 mm
ZAP/TW ZDUA2.5-2N
Colour
Qty.
Order No.
For terminal:
dark beige
blue/light blue
orange
50
50
50
1720960000 ZDUA 2.5-2
1720970000 ZDUA 2.5-2 BL
1720980000 ZPEA 2.5-2
dark beige
50
Width
5 mm
ZAP ZDUB
ZAP ZDUB BL
ZAP ZDUB OR
1808170000 ZDUA 2.5-2N
ZDUA 2.5-2N BL
ZPEA 2.5-2N
dark beige
blue/light blue
orange
50
50
50
Width
ZTW ZDUB
1704750000 ZDUB 2.5-2/2AN/15
1704760000 ZDUB 2.5-2/2AN/RC BL
1704770000 ZDUB 2.5-2/2AN/RC GE
ZDUB 2.5-2/2AN/RC OR
ZDUB 2.5-2/4AN/15
ZDUB 2.5-2/4AN/15 BL
ZDUB 2.5-2/4AN/DB
ZDUB 2.5-2/4AN/DB BL
ZDUB 2.5-2/4AN/DB GE
ZDUB 2.5-2/4AN/DM
ZDUB 2.5-2/4AN/DM BL
ZDUB 2.5-2/2AN/15 BL
ZDUB 2.5-2/4AN/DM GE
ZDUB 2.5-2/4AN/RC
ZDUB 2.5-2/4AN/RC/BL
ZDUB 2.5-2/4AN/RC/GE
ZPEB 2.5-2/2AN
ZDUB 2.5-2/2AN/DB
ZDUB 2.5-2/2AN/DB BL
ZDUB 2.5-2/2AN/DB GE
ZDUB 2.5-2/2AN/DM
ZDUB 2.5-2/2AN/DM BL
ZDUB 2.5-2/2AN/DM GE
ZDUB 2.5-2/2AN/RC
dark beige
50
1704340000 ZDUB 2.5-2/2AN/15
ZDUB 2.5-2/2AN/RC BL
ZDUB 2.5-2/2AN/RC GE
ZDUB 2.5-2/2AN/RC OR
ZDUB 2.5-2/4AN/15
ZDUB 2.5-2/4AN/15 BL
ZDUB 2.5-2/4AN/DB
ZDUB 2.5-2/4AN/DB BL
ZDUB 2.5-2/4AN/DB GE
ZDUB 2.5-2/4AN/DM
ZDUB 2.5-2/4AN/DM BL
ZDUB 2.5-2/2AN/15 BL
ZDUB 2.5-2/4AN/DM GE
ZDUB 2.5-2/4AN/RC
ZDUB 2.5-2/4AN/RC/BL
ZDUB 2.5-2/4AN/RC/GE
ZPEB 2.5-2/2AN
ZDUB 2.5-2/2AN/DB
ZDUB 2.5-2/2AN/DB BL
ZDUB 2.5-2/2AN/DB GE
ZDUB 2.5-2/2AN/DM
ZDUB 2.5-2/2AN/DM BL
ZDUB 2.5-2/2AN/DM GE
ZDUB 2.5-2/2AN/RC
5 mm
1282250000 – 2012/2013
... for WeiCoS pluggable terminals
Type
Width
2.5 mm
ZAP/TW ZT2.5/2AN
ZAP/TW ZT2.5/2AN OR
Width
2.5 mm
ZAP/TW ZT2.5/3AN
Colour
Qty.
Order No.
For terminal:
dark beige
orange
50
50
1816030000 ZT 2.5/2AN/1
1816040000 ZTPE 2.5/2AN/1
dark beige
50
1816050000 ZT 2.5/3AN/1
ZTPE 2.5/3AN/1
dark beige
orange
50
50
1816070000 ZT 2.5/4AN/2
1816080000 ZTPE 2.5/4AN/2
dark beige
50
Width
2.5 mm
ZAP/TW ZDT2.5/2
1816090000 ZT 2.5/4AN/4
ZTC 2.5/4AN/4
ZTCPE 2.5/4AN/4
ZTPE 2.5/4AN/4
dark beige
50
Width
ZAP/TW ZTTR2.5
1816110000 ZDT 2.5/2
ZDT 2.5/2 DU-PE
ZDT 2.5/2 PE
dark beige
50
1865520000 ZTTR 2.5
ZTTR 2.5/O. TNHE
Width
2.5 mm
ZAP/TW ZT2.5/4AN/2
ZAP/TW ZT2.5/4AN/2 OR
Width
2.5 mm
ZAP/TW ZT2.5/4AN/4
... for double- / multi-layer terminal bocks
Type
Width
1.5 mm
ZAP ZVLD 2.5
Colour
dark beige
... for custom applications
Type
Width
2 mm
ZTW ZTL6
ZTW ZTL6 OR
Colour
Qty.
10
Qty.
Order No.
C
For terminal:
1210410000 ZVLD 2.5
Order No.
For terminal:
dark beige
orange
20
20
Width
1.5 mm
ZAP ZDU4/NT
1771870000 ZTD 6
1771880000 ZTD 6/STB
ZTL 6
ZTL 6/STB
dark beige
20
Width
2.5 mm
ZAP ZDU10/16S
1757970000 ZDU 4/NT
ZDU 4/NT DB
dark beige
20
1739660000 ZDU 10/NT
ZDU 10S
ZDU 10S BL
ZDU 16S
ZDU 16S BL
ZNT 10S
ZNT 16S
ZPE 10S
ZPE 16S
1282250000 – 2012/2013
Terminals, Z-Series
Accessories Z-Series – Optical separation
C.133
Accessories Z-Series – Electrical supply
Integrated partition plate
Output possible on left and right
Terminals, Z-Series
ZEI 16 supply terminal
C
The ZEI 16 supply terminal can be used for supplying
current up to a conductor cross-section of 25 mm2.
Standard cross-connections then distribute the
current to any number of terminals with a smaller
cross-sectional area.
Output options and corresponding cross-connections
Feed terminal
Output terminal
Cross-connection
ZEI 16
ZDU 2.5
ZDU 2.5/4AN
ZDU 2.5N
ZDU 2.5N/3AN
ZDU 2.5N/4AN
ZDU 4
ZDU 4/3AN
ZDU 4/4AN
ZDU 6
ZDU 6/3AN
ZTR 2.5
ZTR 2.5/3AN
ZTR 2.5/4AN
Output terminal
ZQV 2.5/...
ZQV 2.5/...
ZQV 2.5/...
ZQV 2.5/...
ZQV 2.5/...
ZQV 4/...
ZQV 4/...
ZQV 4/...
ZQV 6/...
ZQV 6/...
ZQV 2.5/…
ZQV 2.5/…
ZQV 2.5/…
Cross-connection
ZDU 1.5
ZDU 1.5/3AN
ZDU 1.5/4AN
ZQV 1.5/...
ZQV 1.5/...
ZQV 1.5/...
The following tables show a number of options for
distributing current at the supply point, together with
corresponding cross-connections and the maximum
current.
Feed terminal
ZEI 6
1) with IEPL
Type
ZEI 16
ZEI 16 BL
IEPL
QVAR
Imax =
Σ In (left) + Σ In (right)
Imax =
Σ In (right)
Maximum current flow Imax only with ZEI 16
Colour
dark beige
blue
dark beige
dark beige
Qty.
20
20
20
20
C.134
Supply
right
•
•
•
•
•
•
• 1)
• 1)
•
• 1)
• 2)
• 2)
•
Supply
right
•
•
•
2) with QVAR
Imax =
Σ In (links)
Ordering data
Supply
left
•
•
•
•
•
•
•
•
•
•
• 2)
• 2)
•
Supply
left
•
•
•
Order No.
1745350000
1766240000
1859570000
1836370000
Feed terminal
Cross-connection
ZDU 2.5
ZQV 2.5
ZDU 2.5/4AN
ZQV 2.5
ZDU 4
ZQV 4
ZDU 6
ZQV 6
Supply conductor
cross-section area
16 mm2
25 mm2
16 mm2
25 mm2
16 mm2
25 mm2
16 mm2
25 mm2
Supply
left or right
48 A
48 A
48 A
48 A
64 A
66 A
76 A
82 A
Supply
middle
76 A
89 A
76 A
89 A
76 A
100 A
76 A
100 A
1282250000 – 2012/2013
Accessories Z-Series – Electrical supply
Supply on the left
Supply on the right
Terminals, Z-Series
Supply with standard terminals
According to IEC 60204-1 and IEC 60 439-1, when
reducing the conductors within distribution boards
and controllers, protective devices for cables and
conductors can be installed up to a maximum of
3 meters away from the supply side and need not be
positioned at the beginning of the supply side. The
conductor before the output fuse must be routed to
make it “short-circuit proof”.
C
Supply options and corresponding cross-connections
on the right
• 3) • 2)
• 1)
on the left
•
• 1)
•
• 1)
• 2)
•
• 1)
•
ZTR 2.5/4AN
•
ZTR 2.5/3AN
•
• 1)
• 1)
ZTR 2.5
• 2)
• 2)
• 2)
•
• 2)
• 2)
• 2)
• 2)
• 2)
• 2)
•
•
• 1)
•
•
• 2)
• 2)
•
• 1)
ZDU 4/4AN
•
• 1)
• 1)
ZDU 4/3AN
ZDU 2.5N/4AN
•
• 1)
• 1)
ZDU 4
ZDU 2.5N/3AN
• 2)
• 2)
• 2)
•
•
•
ZDU 2.5N/4AN
ZDU 4
ZDU 4/3AN
• 2)
• 2)
• 2)
• 1)
• 1)
• 1)
•
•
•
•
•
ZDU 6
• 3) • 2)
ZDU 6 / 3 AN
•
• 2)
1) with IEPL 2) with QVAR
3) Maximum current value at the smallest cross-section:
– ZDU 6 with ZQV 2.5/3 to ZDU 2.5: 55 A
– ZDU 6 with ZQV 2.5/4 to ZDU 2.5: 57 A
• 1)
• 1)
•
•
• 2)
• 2)
• 1)
• 1)
•
•
•
ZTR 2.5/4AN
ZDU 2.5N/3AN
•
•
•
ZTR 2.5/3AN
ZDU 2.5N
• 1)
• 1)
• 1)
ZTR 2.5
ZDU 2.5/4AN
• 2)
• 2)
• 2)
on the right
ZDU 4
ZDU 4 / 3 AN
ZDU 4 / 4 AN
ZDU 4/4AN
ZDU 2.5/3AN
Output terminals
•
•
•
Supply terminals
1282250000 – 2012/2013
•
• 1)
• 1)
ZDU 2.5
ZDU 2.5N
ZDU 6
ZDU 6/3AN
ZDU 2.5/4AN
on the left
ZDU 4
ZDU 4/3AN
ZDU 4/4AN
ZDU 2.5/3AN
Supply terminals
Output terminals
ZDU 2.5
•
• 2)
• 2)
• 2)
• 2)
• 2)
• 2)
• 1)
• 1)
• 1)
• 2)
• 2)
• 2)
• 2)
• 1)
•
C.135
Accessories Z-Series – Electrical supply
Terminals, Z-Series
Pluggable Cross-Connection ZQV
Breaking out contact elements
If one or more (max. 60 % for reasons of stability
and temperature rise) of the contact elements are
broken out of the cross-connections, terminals may
be bypassed to suit the application.
Fitting and changing crossconnections
C
The fitting and changing of cross-connections
is a trouble-free and fast operation:
– Insert the cross-connection into the crossconnection channel in the terminal...
The time-saving, easy-to-use cross-connection comb
for terminals, featuring tension clamp technology.
•ZQV 2.5 as 2- to 10-pole combs and
… and press it fully home. (The cross-connection
may not project from the channel.)
• ZQV 2.5N as 2- to 10-pole combs and
• ZQV 4 as 2- to 10-pole combs and
• ZQV 6 as 2- to 4-pole combs and
• ZQV 10, ZQV 16 and ZQV 35 as
2-pole combs (bridges)
– R emove a cross-connection by simply prising it out
with a screwdriver.
• ZQV 35-10, ZQV 35-16 and ZQV 16-10 used
as a reducer cross-connector distributes current
from terminals with larger cross-connections to
terminals with smaller cross-section.
These versions come with complete shock
protection.
However, please note that the rated voltage is
reduced to 400 V when using cross-connections.
This does not apply to terminals with a
rated voltage below 400 V. Here the rated
voltage of the used terminal is mandatory.
Shortening cross-connections
Cross-connections can be shortened in length
using a suitable cutting tool, e.g. KT ZQV (order no.
9002170000). However, three contact elements
must always be retained.
Caution:
Contact elements must not
be deformed!
By using manually cut ZQV and cross-connections
with blank cut edges (> 10 poles) the voltage
reduces to 25 V.
C.136
1282250000 – 2012/2013
Terminals, Z-Series
C
1282250000 – 2012/2013
C.137
Accessories Z-Series – Electrical supply
Terminals, Z-Series
Possible combinations
In one cross-connection channel
single
adjacent
bridging
C
In two cross-connection channels
parallel/bridging
parallel/lengthening
Possible cross-connections of terminals of the same type with corresponding cross-connections
Terminal type
Standard terminals
ZDU 2.5
ZDU 2.5 / 3 AN
ZDU 2.5 / 4 AN
ZDU 2.5N
ZDU 2.5N / 3 AN
ZDU 2.5N / 4 AN
ZTR 2.5 ...
ZSI 2.5 ...
ZDU 4 ...
ZDU 6 ...
ZDU 10, ZDU 16, ZDU 35
ZPE 2.5
ZPE 4
ZPE 6
ZPE 10, ZPE 16, ZPE 35
Roof-Style terminals
ZDU 2.5-2
ZDU 2.5-2 / 3 AN
ZDU 4-2/...
ZDU 6-2/...
ZPE 2.5-2
ZPE 2.5-2 / 3 AN
ZPE 4-2/...
ZPE 6-2/...
C.138
Querverbindung
chain bridge
single
adjacent
bridging
Kettenbrücke
ZQV 2.5/…
ZQV 2.5/…
ZQV 2.5/…
ZQV 2.5/…
ZQV 2.5/…
ZQV 2.5/…
ZQV 2.5/…
ZQV 2.5/…
ZQV 4/…
ZQV 6/…
ZQV 10/2
ZQV 2.5/...
ZQV 4/...
ZQV 6/...
ZQV 10
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ZQV 2.5/…
ZQV 2.5/…
ZQV 4/…
ZQV 6/…
ZQV 2.5/…
ZQV 42.5/…
ZQV 4/…
ZQV 6/…
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
parallel
bridging
•
parallel
lengthening
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1282250000 – 2012/2013
Accessories Z-Series – Electrical supply
Terminals with different rated cross-section
term. type 1
ZDU 4
req. cross-connection
ZQV 2.5/...
term. type 2
ZDU 2.5
term. type 1
ZDU 6
req. cross-connection
ZQV 4/...
term. type 2
ZDU 4
Terminals, Z-Series
Alternative cross-connections available
C
Fuse terminals with same rated cross-section
It is necessary to break out the cross-connection panel in the side wall of the fuse terminal.
ZQS 2.5/...
ZSI 2.5/2
Terminals without cross-connection channel – ZDU 2.5-2 / 4 AN
To cross connect ZDU 2.5-2/4 AN terminals, which do not have cross-connection
channels, use the ZQB 2.5 cross-connection bridge to provide a simple crossconnection solution.
The illustration shows how to fit ZQB 2.5 correctly.
Always ensure that the conductor is placed between the tension clamp and
ZQB 2.5.
The conductor cross-sections is reduced to 1.5 mm2 “e” and “f” as a result of
using ZWB 2.5.
1282250000 – 2012/2013
C.139
Terminals, Z-Series
Accessories Z-Series – Electrical supply
ZQV 1.5
Cross-connections
according to dimensions
Technical data
Current / Current
Ordering data
C
A
2-pole
3-pole
4-pole
5-pole
6-pole
7-pole
8-pole
9-pole
10-pole
20-pole
32-pole
C.140
17.5 / 17.5
Type
ZQV 1.5/2
ZQV 1.5/3
ZQV 1.5/4
ZQV 1.5/5
Qty.
60
60
60
20
Order No.
1776120000
1776130000
1776140000
1776150000
ZQV 1.5/10
20
1776200000
For terminal:
ZDU 1.5 ...
ZDK 1.5 ...
ZEI 6
24 / 24
Type
ZQV 2.5/2
ZQV 2.5/3
ZQV 2.5/4
ZQV 2.5/5
ZQV 2.5/6
ZQV 2.5/7
ZQV 2.5/8
ZQV 2.5/9
ZQV 2.5/10
ZQV 2.5/20
For terminal:
ZDU 2.5 ...
ZDK 2.5 ...
ZTR 2.5 ...
ZDTR 2.5
ZTSI 2.5 ...
ZRV 2.5 ...
ZIA 2.5 ...
ZEI 16
ZDU 2.5-2 ...
ZQV 35-10
Cross-connections
according to dimensions
Technical data
Current / Current
Ordering data
ZQV 2.5
ZQV 4
Qty.
60
60
60
20
20
20
20
20
20
20
Order No.
1608860000
1608870000
1608880000
1608890000
1608900000
1608910000
1608920000
1608930000
1608940000
1908960000
ZDK 2.5-2
ZTR 2.5-2 ...
ZDLD 2.5-2 ...
ZDKPE 2.5-2
ZDU 2.5N ...
ZNT 2.5/3AN ...
ZEI 16-2/1 AN
ZDU 2.5 S
ZTN 2.5 S
ZQV 2.5N
32 / 32
Type
ZQV 4/2 GE
ZQV 4/3 GE
ZQV 4/4 GE
ZQV 4/5 GE
ZQV 4/6 GE
ZQV 4/7 GE
ZQV 4/8 GE
ZQV 4/9 GE
ZQV 4/10 GE
ZQV 4/20 GE
For terminal:
ZDU 4 ...
ZDK 4/S ...
ZEI 16
Qty.
60
60
60
20
20
20
20
20
20
20
Order No.
1608950000
1608960000
1608970000
1608980000
1608990000
1609000000
1609010000
1609020000
1609030000
1909010000
ZDU 4-2 ...
ZDU 4 S
ZNT 4 S
ZEI 16-2/1 AN
ZQB 2.5
Reducing cross-connection
A
2-pole
3-pole
4-pole
5-pole
6-pole
7-pole
8-pole
9-pole
10-pole
20-pole
32-pole
57 / 105
Type
ZQV 35-10
For terminal:
ZDU 10 ...
ZPE 10 ...
ZDU 35
ZPE 35
Qty.
10
Order No.
7920100000
ZDU 10 S
ZNT 10 S
24 / 24
Type
ZQV 2.5N/2 GE
ZQV 2.5N/3 GE
ZQV 2.5N/4 GE
ZQV 2.5N/5 GE
ZQV 2.5N/6 GE
ZQV 2.5N/7 GE
ZQV 2.5N/8 GE
ZQV 2.5N/9 GE
ZQV 2.5N/10 GE
For terminal:
ZT 2.5 ...
ZDT 2.5 ...
ZP 2.5 ...
ZTTQ 2.5 ...
ZTC ...
Qty.
60
60
60
20
20
20
20
20
20
Order No.
1693800000
1693810000
1693820000
1693830000
1693840000
1693850000
1693860000
1693870000
1693880000
ZDUA 2.5-2 ...
ZDUA 2.5-2N ...
ZDL 2.5 ...
ZDL 2.5 S
24 / 24
Type
ZQB 2.5-2
For terminal:
Qty.
50
Order No.
1677120000
ZDUB 2.5-2/4 AN
ZDU 2.5-2/4 AN
The ZQB 2.5 cross-connector is used for connecting
terminals without a separated cross-connection
channel.
The ZBW tools is used for opening the terminal
points. (order no. 1650670000)
1282250000 – 2012/2013
Accessories Z-Series – Electrical supply
ZQV 10/2
ZQV 16/2
ZQV 35/2
Terminals, Z-Series
ZQV 6
41 / 41
Type
ZQV 6/2 GE
ZQV 6/3 GE
ZQV 6/4 GE
ZQV 6/24
For terminal:
ZDU 6 …
ZDK 6/S …
ZTL 6 …
ZEI 16 ZEI
Qty.
60
60
60
10
Order No.
1627850000
1627860000
1627870000
1908990000
ZDU 6-2 …
ZDU 6 S
ZNT 6 S
ZEI 16-2/1 AN
57 / 57*
Type
ZQV 10/2
Qty.
25
Order No.
1739680000
/ 10
Type
ZQS 2.5/2
ZQS 2.5/3
ZQS 2.5/4
ZQS 2.5/5
Qty.
25
Order No.
1739690000
105 / 105
Type
ZQV 35/2
Qty.
10
Order No.
1739700000
C
For terminal:
ZDU 10 …
ZDU 10 NT
ZDU 10 S
ZNT 10 S
* Only with use of 2 dummy cables
ZQS 2.5
76 / 76*
Type
ZQV 16/2
For terminal:
ZDU 16
ZPE 16
ZDU 16 S
ZPE 16 S
ZNT 16 S
For terminal:
ZDU 35
ZPE 35
ZNT 35/S
* Only with use of 2 dummy cables
ZVQ 2.5/1.5
Qty.
20
20
20
20
For terminal:
ZSI 2.5/2 ...
1282250000 – 2012/2013
Order No.
1633200000
1633210000
1633220000
1633230000
/ 23
Type
ZVQ 2.5/1.5
For terminal:
ZDK 2.5 ...
ZDT 2.5/2
Qty.
50
Order No.
1720700000
ZDLD 2.5-2 ...
C.141
Terminals, Z-Series
Accessories – Testing / checking
C
Test adapter
ZTA 1
ZTA 2
ZTA 3
The clip-on test adapter ZTA is used as a
single thin element and as a test adapter
strip for measurements in electrical
cabinets. Conductors with cross-sections
from 0.5 mm² to 1.5 mm² can be
connected. The test adapter simply clips
onto the terminal and thus guarantees
reliable contact with the live busbar.
For terminal width 5.1 mm
For terminal width 6.1 mm
For terminal width 8.1 mm
Dimensions
Width / Length / Height1)
Stripping length
Rated data
Rated voltage
Rated current
Rated cross-section
Clamped conductors (H05V/H07V)
solid / stranded
flexible / Flexible with ferrule
Ordering data
mm
mm
5.1 / 31.5
6
6.1 / 31.5
6
8.1 / 31.5
6
V
A
mm²
250
9
1.5
250
9
1.5
250
9
1.5
mm²
mm²
0.5...1.5
0.5...1.5 / 0.5...1.5
Type
ZTA 1
ZTA 1/ZA
For terminal:
ZDU 2.5 ...
ZTR 2.5 ...
ZSI 2.5 ...
ZSI 2.5/2
0.5...1.5
0.5...1.5 / 0.5...1.5
Type
ZTA 2 ZDU4
ZTA 2/ZA ZDU4
For terminal:
ZDU 4 ...
0.5...1.5
0.5...1.5 / 0.5...1.5
Type
ZTA 3 ZDU6
1-pole
With snap-in pegs
Qty.
25
25
Order No.
1609040000
1609050000
Qty.
25
25
Order No.
1609060000
1609070000
Qty.
25
For terminal:
ZDU 6 ...
Test adapter
ZTA 6
ZTA 7
ZTA ZT2.5
The clip-on test adapter ZTA is used as a
single thin element and as a test adapter
strip for measurements in electrical
cabinets. Conductors with cross-sections
from 0.5 mm² to 1.5 mm² can be
connected. The test adapter simply clips
onto the terminal and thus guarantees
reliable contact with the live busbar.
For terminal width 6.1 mm
For terminal width 8.1 mm
For terminal width 5.1 mm
Dimensions
Width / Length / Height1)
Stripping length
Rated data
Rated voltage
Rated current
Rated cross-section
Clamped conductors (H05V/H07V)
solid / stranded
flexible / Flexible with ferrule
Ordering data
mm
mm
6.1 / 31.5
6
8.1 / 31.5
6
5.1 / 20
10
V
A
mm²
250
17.5
1.5
250
9
1.5
250
17.5
1.5
mm²
mm²
0.5...1.5
0.5...1.5 / 0.5...1.5
Type
0.5...1.5
0.5...1.5 / 0.5...1.5
Type
0.5...1.5
0.5...1.5
Type
ZTA ZT2.5
ZTA ZT2.5/ZA
For terminal:
ZT 2.5 ...
1-pole
With snap-in pegs
ZTA 6/ZA
For terminal:
ZDU 4-2 ...
Qty.
25
Order No.
1780660000
ZTA 7/ZA
For terminal:
ZDU 6-2 ...
Qty.
25
Order No.
1780670000
Order No.
1654050000
Qty.
25
25
Order No.
1827080000
1847600000
Note: 1) The height is dependent on the terminal type
C.142
1282250000 – 2012/2013
ZTA 4
ZTA 5
ZTA ZVLD
For terminal width 5.1 mm
For terminal width 3.5 mm
For terminal width 5.1 mm
5.1 / 31
10
3.5 / 20
10
5.1 / 69
6
250
11
1.5
200
13.5
1
250
6
1.5
0.5...1.5
0.5...1.5 / 0.5...1.5
Type
ZTA 4
0.5...1
0.5...1 / 0.5...1
Type
ZTA 5
ZTA 5/ZA
For terminal:
ZDU 1.5 ...
ZDK 1.5 ...
0.5...1.5
Qty.
25
Order No.
1688110000
For terminal:
ZDK 2.5 ...
ZTR 2.5/4 AN ...
Qty.
25
25
Order No.
1776210000
1776220000
Type
ZTA ZVLD
ZTA ZVLD/ZA
For terminal:
ZVLD ...
Test plug
PS
PS 2.3 RT
The test points for the PS 2.3 and PS 2.0
test plugs are available for most Z-Series
terminals. Quick measurements can be
made by inserting the test plug into the
opening provided.
Plug diameter 2.0 mm
Plug diameter 2.3 mm
Technical data
Current / Current
Ordering data
Test plug
Type
PS 2.0 OR
For terminal:
ZDU/ZPE 2.5/...
ZDU/ZPE 4/...
ZDU/ZPE 6/3 AN
ZDU/ZPE 10/...
ZDU/ZPE 16/...
ZDU/ZPE 35
ZEI 16
ZTR 2.5/...
ZTR 2.5 .../D
ZDTR 2.5
ZTR 2.5/SI
ZDL 2.5/SI ...
ZTTR 2.5/2AN/1
1282250000 – 2012/2013
Qty.
20
Order No.
0293800000
Type
PS 2.3 RT
Terminals, Z-Series
Accessories – Testing / checking
C
Qty.
25
25
Order No.
1210390000
1271870000
Qty.
20
Order No.
0180400000
For terminal:
ZDU/ZPE 2.5/...
ZDU/ZPE 4/...
ZDU/ZPE 10/...
ZDU/ZPE 18/...
ZDU/ZPE 35
ZDU/ZPE 4-2
ZDU/ZPE 6-2
ZTR 2.5...
ZTR 2.5.../D
ZDTR 2.5
ZTR 2.5/SI
ZDL 2.5/SI...
ZTTR 2.5/2AN/1
C.143
Terminals, Z-Series
PS ZQV test probes
PS ZQV test probes
PS ZQV
The PS ZQV test probes allow you to use only one product
to test PUSH IN terminals.
Test probes
C
• Safe and hand-free measuring of terminals
• Insert into the ZQV contact
• Very flexible silicone safety-measurement cables
connect to any measurement instrument.
Technical data
DC voltage measuring range
AC voltage measuring range
Weight
Test probes
1000 V
1000 V
Note
Ordering data
Version
Note
C.144
Type
**PS_ZQV_SET
*PS_ZQV
Qty.
1
1
Order No.
1116710000
1121740000
Included in delivery: * 2 test probes (red and black)
** 2 test probes (red and black), 2 silicone safetymeasurement cables (1.2 m, red and black)
1282250000 – 2012/2013
Terminals, Z-Series
C
1282250000 – 2012/2013
C.145
Accessories – Marking and connecting
Terminals, Z-Series
Cover
C
Type
Width
ZAD 7/4
Width
ZAD 1/4
The VDE standards call for power connection terminals to be covered.
For this purpose, Weidmüller can supply yellow warning ZAD covers with the
„lightning flash“ symbol.
The cover is clipped into the screwdriver slit in the terminal and each one covers
a group of four terminals.
Operating tool
The fully-insulated ZBW1 to ZBW6 and ZBWW tools are used for opening
1.5 mm2 and 2.5 mm2 terminal points. They can be used to simultaneously open
multiple terminal points.
The ZBWW tools, with its angled bit, makes it possible conveniently connect
terminals in a confined space.
The plastic tools increase safety when working on facilities during operation.
C.146
Cover
Colour
Qty.
Order No.
For terminal:
20
1781940000 ZDK 1.5
ZDK 1.5 BL
ZDK 1.5DU-PE
ZDK 1.5V
ZDK 1.5V BL
ZDU 1.5
ZDU 1.5 2X2AN
ZDU 1.5 2X2AN BL
ZDU 1.5 BL
ZDU 1.5/3 AN
ZDU 1.5/3 AN/BL
ZDU 1.5/4 AN
ZDU 1.5/4 AN/BL
ZDU 2.5/2X2AN/D+
ZDU 2.5/2X2AN/DZEI 16
ZEI 16 BL
20
1609110000 ZDK 4-2
ZDU 2.5 BL
ZDU 2.5/2X2AN
ZDU 2.5/2X2AN BL
ZDU 2.5/2X2AN/D+
ZDU 2.5/2X2AN/DZDU 2.5/2X2AN/LD+
ZDU 2.5/2X2AN/LDZDU 2.5/3AN
ZDU 2.5/3AN BL
ZDU 2.5/4AN
ZDK 4-2 BL
ZDU 2.5/4AN BL
ZDU 4-2/2AN
ZDU 4-2/2AN BL
ZDU 4-2/3AN
ZDU 4-2/3AN BL
ZDU 4-2/3AN LSC
ZDU 4-2/4AN
ZDU 4-2/4AN BL
ZDUA 2.5-2N
ZDUA 2.5-2N BL
ZDK 4-2 PE
ZEI 16
ZEI 16 BL
ZPE 4-2/4AN
ZPEA 2.5-2N
ZSI 2.5-2/2X2AN/G20
ZSI 2.5-2/2X2AN/G20/LD1
ZSI 2.5-2/2X2AN/G20/LD2
ZSI 6-2 2X2.5/G20
ZSI 6-2 2X2.5/G20/LD1
ZSI 6-2 2X2.5/G20/LD2
ZDK 4-2 V
ZSI 6-2 2X2.5/G20/LD3
ZSI 6-2 2X2.5/G20/LD4
ZTR 2.5/4AN
ZTR 2.5/4AN BL
ZTR 2.5/4AN/O TNHE
ZDK 4-2/D forward
ZDK 4-2/D reverse
ZDK 4-2/DU-PE
ZDK 4-2/N/L
ZDU 2.5
1282250000 – 2012/2013
Cover
Type
Width
ZAD 1/4-2 GE
Width
ZAD 2/4
Colour
Qty.
20
20
Order No.
For terminal:
1764560000 ZDK 2.5-2
ZDK 2.5-2 BL
ZDK 2.5-2 PE
ZDK 2.5V
ZDK 2.5V BL
ZDKPE 2.5-2
ZDKPE 2.5-2/N/L/PE
ZDU 2.5-2
ZDU 2.5-2 BL
ZDU 2.5-2/3AN
ZDU 2.5-2/3AN BL
ZDU 2.5-2/4AN
ZDU 2.5-2/4AN BL
ZDU 2.5/2X2AN/D+
ZDU 2.5/2X2AN/DZEI 16
ZEI 16 BL
ZTR 2.5-2
ZTR 2.5-2 BL
ZTR 2.5-2/O.TNHE
1609080000 ZDU 2.5/2X2AN/D+
ZEI 16 BL
ZSI 2.5-2/2X2AN/G20
ZSI 2.5-2/2X2AN/G20/LD1
ZSI 2.5-2/2X2AN/G20/LD2
ZSI 6-2 2X2.5/G20
ZSI 6-2 2X2.5/G20/LD1
ZSI 6-2 2X2.5/G20/LD2
ZSI 6-2 2X2.5/G20/LD3
ZSI 6-2 2X2.5/G20/LD4
ZSI 6-2/FC
ZDU 2.5/2X2AN/DZSI 6-2/FC LD
ZDU 4
ZDU 4 BL
ZDU 4/3AN
ZDU 4/3AN BL
ZDU 4/4AN
ZDU 4/4AN BL
ZEI 16
Width
ZAD 3/4
20
Width
ZAD 4/5
1609120000 ZDU 2.5/2X2AN/D+
ZDU 2.5/2X2AN/DZDU 6
ZDU 6 BL
ZDU 6/3AN
ZDU 6/3AN BL
ZEI 16
ZEI 16 BL
ZEI 6
20
Width
ZAD 5/5
1746730000 ZDU 10
ZDU 10 BL
ZDU 10/3AN
ZDU 10/3AN BL
ZDU 2.5/2X2AN/D+
ZDU 2.5/2X2AN/DZEI 16
ZEI 16 BL
20
1745210000 ZDU 16
ZEI 16-2/1AN BL
ZDU 16 BL
ZDU 16/3AN
ZDU 16/3AN BL
ZDU 2.5/2X2AN/D+
ZDU 2.5/2X2AN/DZEI 16
ZEI 16 BL
ZEI 16-2/1AN
1282250000 – 2012/2013
Cover
Type
Width
ZAD 6/5
Colour
Width
ZAD 9/4
Operating tool
Type
Width
ZBW 1/3.5
Width
ZBW 1
ZBW 2
ZBW 3
ZBW 4
ZBW-6
ZBWW
Colour
Qty.
Order No.
For terminal:
20
1752620000 ZDU 2.5/2X2AN/D+
ZDU 2.5/2X2AN/DZDU 35
ZDU 35 BL
ZEI 16
ZEI 16 BL
20
1934160000 ZDU 2.5N
ZDU 2.5N/3AN
ZDU 2.5N/4AN
ZDK 2.5
ZDK 2.5/3AN
ZDK 2.5V
ZDUA 2.5-2
ZPEA 2.5-2
Qty.
Order No.
Terminals, Z-Series
Accessories – Marking and connecting
C
For terminal:
1
1781930000 ZDK 1.5DU-PE
ZDK 2.5-2
ZDK 2.5-2 BL
ZDK 2.5-2 PE
ZDK 2.5V
ZDK 2.5V BL
ZDKPE 2.5-2
ZDKPE 2.5-2/N/L/PE
1
1
1
1
1
1
1669620000
1650670000
1650680000
1650690000
1650700000
1669630000
ZDK 2.5-2
ZDK 2.5-2 BL
ZDK 2.5-2 PE
ZDK 2.5V
ZDK 2.5V BL
ZDKPE 2.5-2
ZDKPE 2.5-2/N/L/PE
C.147
Accessories – Other functions
ZRH 1.5 S
Terminals, Z-Series
Reducing sleeves
ZRH 1.5 H
ZRH 1.5 N
The use of reducing sleeves simplifies the
connection of conductors with smaller
cross-sections. Conductors can be reliably
inserted into the clamping point without
the strands fraying. The use of a reducing
sleeve centres the conductor in the entry
point.
Packaged in sets of 100 x 10-pole strips
Technical data
Product type
Ordering data
0.13...0.2 mm². white
0.25...0.5 mm², grey
0.75...1.0 mm², dark grey
C
ZRH 2.5
Reducing sleeve
Type
ZRH 1.5S/1
ZRH 1.5S/2
Qty.
500
500
Order No.
1781950000
1781960000
For terminal:
ZDU 1.5/...
ZPE 1.5/...
Reducing sleeve
Type
ZRH 1.5H/1
ZRH 1.5H/2
For terminal:
ZDK 2.5...
ZDK 2.5 PE
ZDTR 2.5
ZRH 4
Qty.
1000
1000
Order No.
1678810000
1678800000
ZDLD 2.5-2...
ZDU 2.5-2/...
ZPE 2.5-2/...
ZTR 2.5-2...
Reducing sleeve
Type
ZRH 1.5N/1
ZRH 1.5N/2
Qty.
1000
1000
Order No.
1632140000
1632130000
Qty.
100
100
100
100
Order No.
1805490000
1805520000
1805480000
1805530000
For terminal:
ZRV 1.5
ZRV 1.5 PEZVL 1.5
ZIA 1.5/3 L ...
ZIA 1.5/4 L ...
BZT 1/BZT 2
Label
The BZT marking tags enable you to label
the middle of the marking channel with the
WS 10/5 tags. The marking tags can be
put together with pins in order to achieve
the greatest degree of stability.
Reducing sleeve
Type
ZRH 2.5/1 WS
ZRH 2.5/2 GR/V0
ZRH 2.5/3
For terminal:
ZDU 2.5/...
ZTR 2.5/...
C.148
Qty.
1000
1000
1000
Order No.
1614300000
1614290000
1614280000
Reducing sleeve
Type
ZRH 4/1 WS
ZRH 4/2
For terminal:
ZDU 4/...
ZPE 4/...
Qty.
1000
1000
Order No.
1636640000
1636650000
Technical data
Product type
Ordering data
One-sided, without peg
One-sided, with peg
Two-sided without pin
Two-sided, with pin
Marker holder
Type
BZT 1 WS 10/5
BZT 1 ZA WS 10/5
BZT 2 WS 10/5
BZT 2 ZA WS 10/5
For terminal:
ZDU 2.5/...
ZDU 4/...
ZDU 6/...
ZDU A 2.5/...
1282250000 – 2012/2013
Accessories – Other functions
ZZA 2.5
The contact element is placed in the
cross-section channel and the latch clip in
the screwdriver channel. It should then be
pressed down until the end stop. The pitch
spacing is 6 mm. Therefore only every
other terminal can be occupied.
Dimensions
Width / Length / Height
Stripping length
Rated data
Rated voltage
Rated current
Rated cross-section
Rated impulse voltage
Pollution severity
Ordering data
The component plug is used for fitting
electronic components.
If needed, the BZS 1 can be snapped on
to the upper or lower cross-connection
channel on the ZDK 2.5 tension-clamp
terminals.
mm
mm
6.1 / 21 / 23 (50)
V
A
mm²
kV
400
17.5
2.5
6
3
Type
ZZA 2.5/ZA
ZZA 2.5
For terminal:
ZDU 2.5
ZDU 2.5/3 AN
ZDU 2.5/4 AN
ZTR 2.5
ZTR 2.5/3 AN
With snap-in pegs
Qty.
50
50
Order No.
1649350000
1646690000
Shield conductor
ZDUS
The shielding braid from the stripped
control cables is soldered to the ZDUS or
crimped on with 2.8 x 0.8 mm cable-lug
sleeves. The ZDUS can be installed along
side of the ZDU 2.5, ZDU 2.5/3 AN, ZDU
4, ZDU 6 and ZTR 2.5.
Shield conductor - connection terminals
Dimensions
Width / Length / Height
Ordering data
1282250000 – 2012/2013
mm
ZBS
Component plug
4.8 / 83.5 / 33.5
Type
ZDUS
For terminal:
Qty.
20
Dimensions
Width / Length / Height
Stripping length
Rated data
Rated voltage
Rated voltage with LED
Rated current
Rated current with LED
Rated impulse voltage
Pollution severity
Ordering data
Terminals, Z-Series
Additional connection
mm
mm
V
A
kV
For holding 2 LEDs
10 / 22.3 / 48
250
30 V
6
1A
4
3
Type
ZBS1 F.D SET
For terminal:
ZDK 2.5
C
Qty.
10
Order No.
1764550000
Order No.
1676640000
C.149
Accessories – Other functions
▲
Terminals, Z-Series
SIHA fuse holder
▲
For 5 x 20 G-fuse cartridges
The SIHA fuse holder converts a simple disconnect terminal
into a fuse terminal in next to no time.
Simply remove the isolating lever and insert the fuse plug.
•ESimple handling – no tools required
•Housing made of Wemid (V0)
•Rated current 6.3 A
•1.6 W power loss to DIN VDE 0611-6 at 23 °C
ambient temperature (also for 1.5 times rated current –
composite arrangement)
▲
C
2.Press out old fuse.
▲
1.Open fuse holder with fingers or screwdriver.
3.Position new fuse.
4.Press fuse holder together again with fingers or
screwdrive.
SIHA 3
SIHA STRAP
•Even fits on 5 mm wide terminals when fitted in
offset arrangement
without LED
SIHA3/G20
with LED (red)
SIHA3/G20
•Marking position for Dekafix 5 and space for
the E-Fix self-adhesive label, size 8/20
C.150
Qty.
400 V
10 - 36 V
35 - 70 V
60 - 150 V
140 - 250 V
For test-disconnect terminals versions
ZTR 2.5/4 AN
ZTR 2.5...
ZTR 2.5-2
Order No.
1
7921560000
1
1
1
1
7921570000
7921580000
7921590000
7921600000
with strap
SIHA STRAP
Qty.
20
Order No.
9537680000
Connector for “retro-fit” assembly
• Receptacle in the terminal is the marking position
• Integrated marking position on the strap
• Slots into fuse holder either on the left or on the right
1282250000 – 2012/2013
ZST 1 fuse-carrier / ZST multi-carrier
ZST 1
ZST
The ZST 1 fuse-carrier can hold 6 device fuses (5 x 20 or
5 x 25 mm) which are available to be used during servicing
work.
The ZST group carrier is used for temporary „parking“ of
test plugs, cross-connections and fuses which are used
during service work. The group carrier can be snapped on
to the end of a terminal strip or to the TS 35 rail.
Terminals, Z-Series
Accessories – Other functions
C
Dimensions
Width / Length / Height
Ordering data
Type
ZST 1
mm
8 / 62 / 40
Qty.
25
Order No.
1269070000
Component isolating plugs
The Weidmüller philosophy is to realise a multitude of
applications with just a few parts. The component and
isolating plugs (BEST and TNST) represent a logical
extension of this cost-effective and efficient approach. The
component plug can accommodate electronic components
and connect them to the terminal. And once an isolating
plug is removed, the clamping point is obviously disconnected. The opening is easy to recognise.
Component plug (up to 250 V)
Ordering data
Type
BEST
BEST/DRBR
BEST/D
For terminal type
PTR 2.5/4...
PDL 4 TR/...
can be reversed
Dimensions
Width / Length / Height
Ordering data
Type
ZST
mm
10 / 61.1 / 27.5
Qty.
10
Order No.
1678680000
An unintentional reconnection of the circuit is prevented
by simply removing the isolating plug. The BEST and the
TNST have the same pin arrangement. Both plugs are also
identical with the SIHA 3 fuse holder, meaning that they
can be used in all the “disconnecting products” of the
W-, Z-, I- and P-Series.
Fitted with…
–
wire jumper
diode 1N4007
Qty.
25
25
25
Order No.
1833100000
1878570000
1878560000
Colour
yellow Wemid
Qty.
25
Order No.
1833090000
BEST
Isolating plug
Isolating plug
1282250000 – 2012/2013
Ordering data
Type
TNST
For terminal type
ZTR 2.5...
ZTR 2.5-2
ZDL 2.5/TR
ZDL 2.5/SI
C.151
Accessories – Other functions / Colour range
Terminals, Z-Series
Colour range
C
1.5 mm2
ZDU 1.5
ZDU 1.5 BL
ZDU 1.5 OR
ZDU 1.5/2X2AN
ZDU 1.5/2X2AN BL
ZDU 1.5/2X2AN OR
ZDU 1.5/3AN
ZDU 1.5/3AN BL
ZDU 1.5/3AN OR
ZDU 1.5/4AN
ZDU 1.5/4AN BL
ZDU 1.5/4AN OR
The colours listed below are available as standard.
Other variants are available upon request and are
subject to minimum order quantities.
Colour
Qty.
Order No.
blue
orange
100
100
1775490000
1775500000
blue
orange
100
100
1826990000
1827000000
blue
orange
100
100
1775540000
1775550000
blue
orange
100
100
1775600000
1775610000
2.5 mm2
ZDU 2.5
ZDU 2.5 BL
ZDU 2.5 BR
ZDU 2.5 GE
ZDU 2.5 GE/GN
ZDU 2.5 GN
ZDU 2.5 GR
ZDU 2.5 OR
ZDU 2.5 RT
ZDU 2.5 SW
ZDU 2.5 VI
ZDU 2.5 WS
ZDU 2.5/2X2
ZDU 2.5/2X2AN BL
ZDU 2.5/2X2AN OR
ZDU 2.5/3AN
ZDU 2.5/3AN BL
ZDU 2.5/3AN GE
ZDU 2.5/3AN GE/GN
ZDU 2.5/3AN GN
ZDU 2.5/3AN GR
ZDU 2.5/3AN OR
ZDU 2.5/3AN RT
ZDU 2.5/3AN SW
ZDU 2.5/3AN WS
ZDU 2.5/4AN
ZDU 2.5/4AN BL
ZDU 2.5/4AN BR
ZDU 2.5/4AN GE
ZDU 2.5/4AN GE/GN
ZDU 2.5/4AN GN
ZDU 2.5/4AN GR
ZDU 2.5/4AN OR
ZDU 2.5/4AN RT
ZDU 2.5/4AN SW
ZDU 2.5/4AN WS
ZDU 2.5 2X2AN
ZDU 2.5/2X2AN
ZDU 2.5-2
ZDU 2.5-2 BL
ZDU 2.5-2 OR
ZDU 2.5-2/3AN
ZDU 2.5-2/3AN BL
ZDU 2.5-2/3AN GE
ZDU 2.5-2/3AN OR
ZDU 2.5-2/3AN RT
ZDU 2.5-2/3AN SW
ZDU 2.5-2/3AN WS
ZDU 2.5-2/4AN
ZDU 2.5-2/4AN BL
ZDU 2.5-2/4AN OR
ZTR 2.5
ZTR 2.5 OR
C.152
Colour
Qty.
Order No.
blue
braun
yellow
yellow/green
green
grey
orange
red
black
violet
white
100
100
100
100
100
100
100
100
100
100
100
1608520000
1683300000
1683270000
1698780000
1683280000
1683310000
1636780000
1683260000
1683330000
1683290000
1683320000
1608610000
1636810000
blue
orange
blue
yellow
yellow/green
green
grey
orange
red
black
white
100
100
100
100
100
100
100
100
100
1608550000
1683350000
1698790000
1683360000
1683390000
1636790000
1683340000
1683410000
1683400000
blue
braun
yellow
yellow/green
green
grey
orange
red
black
white
100
100
100
100
100
100
100
100
100
1608580000
1683460000
1683430000
1692240000
1683440000
1683470000
1636800000
1683420000
1683490000
1683480000
1608600000
blue
orange
blue
yellow
orange
red
black
white
100
100
1772070000
1772080000
1706040000
1946240000
1706050000
1946220000
1946210000
1946230000
blue
orange
100
1706070000
1706080000
orange
100
8731680000
ZTR 2.5/3AN
ZTR 2.5/3AN OR
orange
50
8731690000
ZTR 2.5/4AN
ZTR 2.5/4AN OR
orange
100
7920940000
ZTR 2.5-2
ZTR 2.5-2 OR
orange
100
1779130000
ZDK 2.5
ZDK 2.5 OR
orange
50
1694140000
ZDK 2.5-2
ZDK 2.5-2 OR
orange
50
1831260000
1282250000 – 2012/2013
Accessories – Other functions / Colour range
ZDU 4
ZDU 4 BL
ZDU 4 BR
ZDU 4 GE
ZDU 4 GE/GN
ZDU 4 GR
ZDU 4 OR
ZDU 4 RT
ZDU 4 SW
ZDU 4 WS
ZDU 4/3AN
ZDU 4/3AN BL
ZDU 4/4AN OR
ZDU 4-2/2AN
ZDU 4-2/2AN BL
ZDU 4-2/3AN
ZDU 4-2/3AN BL
ZDU 4-2/3AN OR
Colour
Qty.
Order No.
blue
braun
yellow
yellow/green
grey
orange
red
black
white
100
100
100
100
100
100
100
100
1632060000
1683620000
1683590000
1698770000
1683630000
1636830000
1683580000
1683650000
1683640000
blue
orange
7904190000
8670210000
blue
1770840000
blue
orange
100
1770860000
1770870000
Colour
Qty.
Order No.
16 mm2
ZDU 16
ZDU 16 BL
ZDU 16 OR
ZDU 16 SW
ZDU 16/3AN
ZDU 16/3AN BL
Colour
Qty.
blue
orange
black
25
blue
orange
red
50
50
1608630000
1636820000
1830420000
1745240000
1830680000
1830650000
1768330000
blue
6 mm2
ZDU 6
ZDU 6 BL
ZDU 6 OR
ZDU 6 RT
ZDU 6/3AN
ZDU 6/3AN BL
ZDU 6/3AN OR
ZDU 6-2/2AN
ZDU 6-2/2AN BL
ZDU 6-2/2AN OR
ZDU 6-2/3AN
ZDU 6-2/3AN BL
ZDU 6-2/3AN OR
Order No.
Mini terminals
ZDUA 2.5-2
ZDUA 2.5-2 BL
ZDUA 2.5-2 OR
ZDUA 2.5-2N BL
ZDUB 2.5-2/2AN
ZDUB 2.5-2/2AN/DB BL
ZDUB 2.5-2/2AN/DB GE
ZDUB 2.5-2/2AN/DM BL
ZDUB 2.5-2/2AN/DM GE
ZDUB 2.5-2/2AN/DM OR
ZDUB 2.5-2/4AN
ZDUB 2.5-2/4AN/DB BL
ZDUB 2.5-2/4AN/DB GE
ZDUB 2.5-2/4AN/DM BL
ZDUB 2.5-2/4AN/DM GE
ZDUB 2.5-2/4AN/DM OR
2.5 mm2
Colour
Qty.
Order No.
blue
orange
blue
100
1808180000
1720940000
1808180000
blue
yellow
blue
yellow
orange
blue
yellow
blue
yellow
orange
100
1704510000
1704530000
1704360000
1704380000
1704370000
100
1704700000
1704720000
1704550000
1704570000
1704560000
Terminals, Z-Series
4 mm2
C
35 mm2
ZDU 35
ZDU 35 BL
ZDU 35 OR
Colour
Qty.
blue
orange
10
Order No.
1739630000
1830760000
7907420000
8670420000
blue
orange
blue
orange
50
1771390000
1771400000
blue
orange
50
1771420000
1771430000
Colour
Qty.
blue
orange
25
10 mm2
ZDU 10
ZDU 10 BL
ZDU 10 OR
ZDU 10/3AN
ZDU 10/3AN BL
blue
1282250000 – 2012/2013
Order No.
1746760000
1830610000
1767700000
C.153
Terminals, Z-Series
C
C.154
1282250000 – 2012/2013
Similar pages