Download

Contents
Accessories
Accessories
Accessories
1282250000 – 2012/2013
Busbars
F.2
Terminal rails
F.8
End brackets
F.12
Terminal rail supports / Mounting feet
F.13
Cover strips and retaining plates
F.15
Terminal markers
F.16
Printing systems and software
F.35
Tools
F.42
Wire end ferrules
F.66
Insulated cable connectors
F.78
F
F.1
Busbars – Introduction
Accessories
Busbars
In switching facilities and controllers, the N conductor may
need to be merged with the PE conductor at a central point.
For this reason, busbars are available that allow a wide range
of cables to be connected within a confined space (up to
70 wires on one metre of rail). The cables are connected
via a compression piece or a clamping yoke. A guide lug
at the compression piece grips into the busbar and holds
tightly to the compression piece. The clamping yokes can
be moved on the busbar and adjusted to the whole wiring in
the facility. The busbar can be used without holes in various
lengths. The SH rail holding clamp is used for fastening. On
longer rails, it can also be aligned between clamping yokes.
In order to bring together neutral conductors and predective
conductors at a central point, it is advantageous to use ZB
cable clamps together with 10 x 3 or 6 x 6 busbars. The
cable clamps can be pushed onto the busbar and adjusted
to the entire wiring in the system. The cable clamp serves
as the protective conductor connection and can be supplied
with green/yellow insulating caps. These caps indicate
the protective function and marking tags allow clear
identification of each conductor. If the cable clamps are used
to connect neutral conductors, they can be marked with a
blue insulating cap.
ZBE 6 can also be swivelled onto the busbar retrospectively.
F
Cable clamps
F.2
1282250000 – 2012/2013
Busbars, unperforated
Busbars, perforated
SSch
Type
SSch 10 x 3
SSch 10 x 3
SSch 10 x 3
SSch 6 x 6
SSch 15 x 6
Qty.
1
1
1
1
1
Order No.
0348900000
0438000000
0259800000
0571300000
0357400000
Qty.
1
1
1
Order No.
0280200000
0280300000
1313600000
Pressure piece
DKSUE
Qty.
100
Order No.
0280100000
Clamping screw
BFSC M5 x 8
Qty.
100
Order No.
0296700000
NSch / ESch
Type
NSch 15 x 2
ESch 12 x 2
NSch 2M
Material
Copper, tin-plated
Steel, galvanised
Brass, blank
Copper, tin-plated
Copper, tin-plated
Cross-section
10 x 3 mm
10 x 3 mm
10 x 3 mm
6 x 6 mm
15 x 6 mm
Length
1m
1m
1m
1m
1m
Current carrying capacity
140 A
Material
Copper, blank
Steel, galvanised
Copper, blank
Cross-section
15 x 2 mm
12 x 2 mm
15 x 2 mm
Length
1m
1m
2m
Current carrying capacity
80 A
100 A
140 A
265 A
80 A
Accessories
Busbars
F
Connection data NSch / ESch
Screw connection solid
Stripping length
Cable lug connection
Max. current per connection
1282250000 – 2012/2013
0.5 ... 2.5 mm2
9 mm
max. 16 mm2
27 A
F.3
Busbars
Busbar holders
SH
With clip and base
Type
SH 1 TS 15 complete
26.5
24.5
12.5
10.5
6.5
2.
Qty.
20
Order No.
0299860000
20
0401460000
500
0635960000
24.5
15
24
20.6
1.
For busbar cross-section ....
10 x 3, 6 x 6, 15 x 2, 12 x 2
15 x 2, 15 x 6
24
20.6
Accessories
26.5
24.5
12.5
10.5
6.5
Figure
1.
2.
2
1
24.5
15
Individual parts SH1
SH 1 Base
2
1
SH 1 Clip
F
With metal bridge
for 1 SH1
for 2 SH1 stacked
100
50
0103300000
0267100000
Type
SH 2S
For busbar cross-section ....
10 x 3, 6 x 6, 10 x 5, 15 x 6
Qty.
10
Order No.
0641720000
Qty.
10
Order No.
0494920000
Qty.
10
Order No.
0556660000
35.5
32
22.2
21
26
Fixing screw for SH1
BFSC M4x9
BFSC M4x30
15
6.5
2
40
40
5.7
The arrangement of mounting rails in totally
insulated facilities
22.2
21
Type
SH 2
15
6.5
2
40
40
5.7
Type
SH 3
With metal bridge
For busbar cross-section ....
10 x 3, 6 x 6, 10 x 5
32.5
15
10
45
65
55
4.5
4.5
65
4.5
F.4
1282250000 – 2012/2013
Busbar holders
WEW
Type
WEW 35/1
WEW 35/1 SW
WEW 35/1 GR
WEW 35/2
WEW 35/2 SW
WEW 35/2 GR
For busbar cross-section ....
10 x 3, 6 x 6
10 x 3, 6 x 6
10 x 3, 6 x 6
10 x 3, 6 x 6
10 x 3, 6 x 6
10 x 3, 6 x 6
Qty.
50
100
100
100
100
100
Order No.
1059000000
1162600000
1227890000
1061200000
1061210000
1859200000
For busbar cross-section ....
15 x 6 mm
Qty.
10
Order No.
0364200000
Accessories
Busbars
WEW 35/1 and WEW35/2 as
busbar holder together with
the ZB 4 G tension clamp
Connection element
AK 95
Type
AK 95
The AK 95 connection element is used as a tension clamp for 15 x 6 busbars
Connection cross-sections: Solid = 6…16 mm2
Flexible = 6…50 mm2
Stranded =16…50 mm2
F
36
10
36
M6
1282250000 – 2012/2013
F.5
Busbars
Tightening torques for clamping screws
according to IEC 60947-1
Cable clamp, uninsulated
Accessories
Products with screw with slotted head
Thread
Tightening torque
Steel screws
min. 8.8
[Nm]
M2
0.2...0.35
M 2.5
0.4…0.8
M3
0.5…1.0
M 3.5
0.8…1.6
M4
1.2…2.4
M5
2.0…4.0
M6
2.5…5.0
For 10 x 3 mm busbars
For retrofitting
F
Also for 10 x 5 mm busbar
ZB / ZBE
Type
Colour
Connection cross-section:
Solid 0.5 ... 6.0 mm2
Flexible 0.5 ... 4.0 mm2
Stranded Clamping screw M3
Stripping length 16 mm
ZB 4, blank
Insulating cap
Insulating cap
blue
green / yellow
Connection cross-section:
Solid 1.0 ... 10 mm2
Flexible 1.5 ... 10 mm2
Stranded -
ZBE 6, blank
Insulating cap
Clamping screw Stripping length 19.5
8.2
19.5
ZB 10, blank
-
19.5
8.2
ZB 16, blank
Insulating cap
Insulating cap
blue
green / yellow
17.0
ZB 35, blank
Insulating cap
blue
50
50
50
0316500000
0475480000
0475460000
19.0
50
50
0459500000
0526060000
19.5
19.0
50
1261300000
10.0
16.0
17.0
50
50
50
0316600000
0502980000
0502960000
21.0
14.4
18.4
20.5
20
50
0266500000
0502780000
ZB 4/6, blank
a
14.7
b
5.6
ZB 16/6, blank
19.0
10.0
ZB
Type
Connection cross-section:
Solid 0.5 ... 6.0 mm2
Flexible 0.5 ... 4.0 mm2
Stranded Clamping screw Stripping length Colour
Dimensions [mm]
c
12.5
h1
10.0
Qty.
Order No.
50
0556700000
50
0556800000
M3
16 mm
Connection cross-section:
Solid 2.5 ... 16 mm2
Flexible 2.5 ... 16 mm2
Stranded 16 ... 25 mm2
Clamping screw Stripping length Order No.
M6
19 mm
For 6 x 6 mm busbar
F.6
green / yellow
Qty.
M4
16 mm
Connection cross-section:
Solid Flexible 16 ... 35 mm2
2
Stranded 16 ... 50 mm
Clamping screw Stripping length h1
10.0
M4
19 mm
Connection cross-section:
Solid 2.5 ... 16 mm2
Flexible 2.5 ... 16 mm2
Stranded 16 ... 25 mm2
Clamping screw Stripping length Dimensions [mm]
Width
c
5.6
16.0
M4
19 mm
Connection cross-section:
Solid 1.5 ... 10 mm2
Flexible 2.5 ... 10 mm2
Stranded Clamping screw Stripping length a
11.7
A 2/A 4-80
[Nm]
0.2...0.35
0.4…0.8
0.5…1.0
0.8…1.6
…
…
…
12.5
17.0
M4
12 mm
1282250000 – 2012/2013
Busbars
Accessories
Cable clamp, insulated
For 10 x 3 mm busbars
For retrofitting
ZB / ZBE /ZF
Type
Colour
Connection cross-section:
Solid 0.5 ... 6.0 mm2
Flexible 0.5 ... 4.0 mm2
Stranded Clamping screw M3
Stripping length 16 mm
ZB 4 G GN/GE
ZB 4 G BL
ZB 4 G SW
ZB 4K GN/GE
ZB 4K BL
Connection cross-section:
Solid 1.0 ... 10 mm2
Flexible 1.5 ... 10 mm2
Stranded -
ZBE 6K GN/GE
ZBE 6K BL
ZBE 6K SW
Clamping screw Stripping length Tension clamp connection
Connection cross-section:
Solid 0.5 ... 6.0 mm2
Flexible 0.5 ... 4.0 mm2
Stranded -
23.0
23.0
23.0
22.5
22.5
22.5
0322160000
0322180000
0322110000
0475360000
0475380000
50
50
50
0525960000
0525980000
0525910000
ZB 16K GN/GE
ZB 16K BL
green/yellow
blue
24.0
24.0
10.0
10.0
19.2
19.2
20.0
20.0
50
50
0502860000
0502880000
ZB 35K GN/GE
ZB 35K BL
ZB 35K SW
green/yellow
blue
black
25.0
25.0
25.0
14.4
14.4
14.4
32.0
32.0
32.0
20.5
20.5
20.5
20
20
20
0502660000
0502680000
0502610000
ZF 4 S
ZF 4 S BL
ZF 4 S GN/GE
beige
blue
green/yellow
22.0
22.0
22.0
6.1
6.1
6.1
24.5
24.5
24.5
-
50
50
50
1814680000
1814660000
1814670000
b
6.0
6.0
9.7
Type
Colour
ZB 4/6K GN/GE
ZB 4/6K BL
green/yellow
blue
a2
21.2
21.2
ZB 16/6K GN/GE
green/yellow
26.0
Dimensions [mm]
d
25.0
25.0
h2
14.0
14.0
Qty.
Order No.
50
50
0565460000
0565480000
50
0569660000
M3
16 mm
Connection cross-section:
Solid 2.5 ... 16 mm2
Flexible 2.5 ... 16 mm2
Stranded 16 ... 25 mm2
1282250000 – 2012/2013
8.0
8.0
8.0
50
50
50
50
50
F
ZB
Clamping screw Stripping length 27.0
27.0
27.0
Order No.
10 mm
For 6 x 6 mm busbar
Clamping screw Stripping length green/yellow
blue
black
Qty.
M6
19 mm
Connection cross-section:
Solid 0.5 ... 4.0 mm2
Flexible 0.5 ... 2.5 mm2
Stranded Stripping length h2
15.5
15.5
15.5
13.0
13.0
M4
16 mm
Connection cross-section:
Solid Flexible 16 ... 35 mm2
2
Stranded 16 ... 50 mm
Clamping screw Stripping length Dimensions [mm]
Width
d
7.6
19.7
7.6
19.7
7.6
19.7
6.0
19.0
6.0
19.0
M4
19 mm
Connection cross-section:
Solid 2.5 ... 16 mm2
Flexible 2.5 ... 16 mm2
Stranded 16 ... 25 mm2
Clamping screw Stripping length green/yellow
blue
black
green/yellow
blue
a2
27.0
27.0
27.0
18.5
18.5
25.0
20.0
M4
12 mm
F.7
Terminal rails – Introduction
Accessories
Terminal rail systems
Active and passive components, as well as intelligent
modules, are mounted on terminal rails. This method has
proved highly effective for decades. However, it is only after
the use of certain consumables – which are frequently not
taken into consideration – that electrical installation is finally
completed. In this chapter, you will find a range of terminal
rails and profile rails for component installation, together
with end brackets for holding and isolating the components.
These guarantee firm installation and isolation.
Weidmüller supplies components which show perfect
functional compatibility.
Terminal rails are made of either steel, stainless steel,
aluminium, copper or plastic, depending on the area of
application.
F
They can also be used as a protective conductor busbar.
Weidmüller PE / earth terminals in the W-Series, Z-Series,
I-Series, SAK- and AKZ-Series comply with requirements
stipulated in IEC 60 947-7-2. According to VDE 0100 part
540, for conductors with cross-sectional areas exceeding
10 mm2, both protective and neutral conductors may
be grouped together as a single category of conductors
designated PEN.
If a terminal rail is used as a PEN busbar, the following
criteria must be observed:
• Only E-Cu or aluminium profiles are allowed
•Short-circuit currents and thermal rated currents must be
taken into account
•The terminal rails are to be insulated as a contribution to
protective insulation
F.8
Stainless steel
Stainless steel is a collective noun for all kinds of steel
(alloys) which are smelted in a special process and have a
high degree of purity. Stainless steel has a much-enhanced
resistance to corrosion. Weidmüller’s stainless steel terminal
rails have the following composition: X5 CrNi 18-10
stainless steel (i.e. ∼18 % chromium, ∼10 % nickel).
Aluminium
Aluminium is second only to copper in its electrical
conductivity. One advantage is its light weight. Aluminium
oxidises quickly in air; thus passivated, it offers excellent
corrosion protection.
Copper
Copper, a heavy metal, has the best electrical conductivity
of all metals used. As it is a soft metal, Weidmüller’s terminal
rails are 2.3 mm thick.
Plastic
The plastic terminal rail scores on two counts: firstly, its
insulating properties, and secondly, its low weight. This
leads to its use in special applications where, for example,
clearance and creepage distances with respect to the
mounting plate cannot be achieved with the standard
terminal rails.
Steel
The steel rail is the most widely used DIN rail on the market.
Among metal DIN rails, it has the lowest short-circuit
resistance, similar to stainless steel.
1282250000 – 2012/2013
U
15 mm
TS 15 x 5
Unperforated
Aluminium
Short-circuit strength
corresponds to E-Cu wire
TS 15x5 2M/AL/BK
16 mm2
max. permissible rated current for PEN function = 76 A)
Steel, galvanised and passivated
TS 15x5 2M/ST/ZN
10 mm2
With slotted hole
Steel, galvanised and passivated
TS 15x5/LL 2M/ST/ZN
TS 15x5/LL 1M/ST/ZN
10 mm2
10 mm2
Material thickness
Length
Qty.
Order No.
1 mm
2m
10 m
0134700000
1 mm
2m
2m
0514200000
1 mm
1 mm
2m
1m
2m
10 m
0117500000
0117510000
Accessories
TS15 terminal rail
5.5 mm
Terminal rails
TS 32 terminal rail
Y
32 mm
Unperforated
15 mm
F
TS 32 x 15
Aluminium
Short-circuit strength
corresponds to E-Cu wire
TS 32X15 2M/AL/BK
70 mm2
(max. permissible rated current for PEN function = 192 A)
Steel, galvanised and passivated
TS 32X15 2M/ST/ZN
35 mm2
Stainless steel
TS 32X15 2M/CRN
With slotted hole
Steel, galvanised and passivated
TS 32X15/LL 2M/ST/ZN
1282250000 – 2012/2013
Material thickness
Length
Qty.
Order No.
1.5 mm
2m
2m
0169300000
1.5 mm
2m
2m
0122800000
35 mm2
1.5 mm
2m
2m
0293220000
Short-circuit strength
corresponds to E-Cu wire
35 mm2
Material thickness
Length
Qty.
Order No.
1.5 mm
2m
2m
0514400000
F.9
Terminal rails
W
7.5 mm
TS 35 x 7.5 terminal rail
Accessories
35 mm
TS 35 x 7.5
Unperforated
Aluminium
Short-circuit strength
corresponds to E-Cu wire
TS 35X7.5 2M/AL/BK
35 mm2
(max. permissible rated current for PEN function = 125 A)
Steel, galvanised and passivated
TS 35X7.5 2M/ST/ZN
16 mm2
TS 35X7.5 1M/ST/ZN
16 mm2
Stainless steel
TS 35X7.5 2M/CRN
16 mm2
With slotted hole
Material thickness
Length
Qty.
Order No.
1 mm
2m
2m
0330800000
1 mm
1 mm
2m
1m
2m
10 m
0383400000
0383410000
1 mm
2m
2m
1747350000
Material thickness
Length
Qty.
Order No.
TS 35X7.5/LL 2M/ST/ZN
TS 35X7.5/LL 1M/ST/ZN
Short-circuit strength
corresponds to E-Cu wire
16 mm2
16 mm2
1 mm
1 mm
2m
1m
2m
10 m
0514500000
0514510000
TS 35X7.5/LL/6 2M/ST/ZN
16 mm2
1 mm
2m
Material thickness
Length
Qty.
Order No.
2.3 mm
2m
2m
0270100000
2.3 mm
2m
2m
0498000000
2.3 mm
2m
2m
1848290000
0514570000
2m
18
7
Steel, galvanised and passivated
6.2
TS 35 x 15 terminal rail
V
15 mm
F
TS 35 x 15
35 mm
Unperforated
Copper
Short-circuit strength
corresponds to E-Cu wire
TS 35X15/2.3 2M/CU/BK
150 mm2
(max. permissible rated current for PEN function = 309 A)
Steel, galvanised and passivated
TS 35X15/2.3 2M/ST/ZN
50 mm2
Unperforated
Material thickness
Length
Qty.
Order No.
1.5 mm
2m
2m
0236400000
Steel, galvanised and passivated
Material thickness
Length
Qty.
Order No.
TS 35X15/LL 2M/ST/ZN
TS 35X15/LL 1M/ST/ZN
Short-circuit strength
corresponds to E-Cu wire
25 mm2
25 mm2
1.5 mm
1.5 mm
2m
1m
2m
10 m
0236500000
0236510000
TS 35X15/LL/6x18 2M/ST/ZN
25 mm2
1.5 mm
2m
2m
1805980000
TS 35X15/LL/6x25 2M/ST/ZN
25 mm2
1.5 mm
2m
2m
1866290000
18
7
With slotted hole
Aluminium
TS 35X15/2.3 2M/AL/BK
70 mm2
(max. permissible rated current for PEN function = 192 A)
Steel, galvanised and passivated
Short-circuit strength
corresponds to E-Cu wire
TS 35X15 2M/ST/ZN
25 mm2
25
11
6.3
6.3
F.10
1282250000 – 2012/2013
TS 35 x 15 terminal rail
V
15 mm
Terminal rails
Unperforated
TS 35 end caps
NEW
TSK 35 x 15
Plastic PVC RAL 7035
TSK 35X15 2M PVC/GR
Length
2m
Qty.
2m
Order No.
0514300000
End cap TS 35 x 7.5
TS END CAP 35X7.5
Qty.
100
Order No.
1283470000
End cap TS 35 x 15
TS END CAP 35X15
100
1283480000
Accessories
35 mm
F
1282250000 – 2012/2013
F.11
End brackets
For TS 15 terminal rail
Accessories
Polyamide 66, screw-in
EW 15
Colour
beige
Torque
0.4 Nm
Qty.
50
Order No.
0382860000
0.4 Nm
50
1071900000
20
7920340000
Torque
1.2 Nm
1.2 Nm
Qty.
50
50
Order No.
0199360000
0206160000
Polyamide with fibreglass, screw-in
WEW 32/1
dark beige
0.5 Nm
50
1067600000
Metal, screw-in
MEW 1/32
silver
2 Nm
20
0445600000
Polyamide with fibreglass, screw-in
EW 15/2
dark beige
Polyamide 66, screwless
ZEW 15
beige
Polyamide 66, screw-in
EWK 2
EWK 1
Colour
beige
beige
EW 15
EW 15/2
ZEW 15
For TS 32 terminal rail
F
EWK 1
EWK 2
WEW 32/1
MEW 1/32
For TS 35 terminal rail
WEW 35/2
WEW 35/1
Polyamide with fibreglass,
screw-in
WEW 35/1
WEW-35/2
WEW 35/1 GR
WEW 35/1 SW
WEW 35/2 GR
WEW 35/3 SW
Colour
Torque
Qty.
Order No.
dark beige
dark beige
grey
black
grey
black
1.2 Nm
0.5 Nm
1.2 Nm
1.2 Nm
0.5 Nm
0.5 Nm
50
100
50
50
100
100
1059000000
1061200000
1227890000
1162600000
1859200000
1061210000
Polyamide 66, screwless
ZEW (6 mm)
ZEW 35/2 (8 mm)
ZEW 35 GR
ZEW 35/2 GR
ZEW 35/2 SW
beige
beige
grey
grey
black
20
20
20
20
20
9540000000
8630740000
1238040000
1227850000
1162610000
0383560000
0383530000
1269050000
1805610000
1805610000
Polyamide 66, screw-in
EW 35
EW 35 GR
EW 35 DB (V0)
ZEW 35/2
EW 35
F.12
Metal, screwable
MEW 35/1
beige
grey
dark beige
silver
0.5 Nm
0.5 Nm
5.5 Nm
50
50
50
10
silver
5.5 Nm
10
MEW 35/1
1282250000 – 2012/2013
Terminal rail supports
TSTW 5/M5
TSTW 5/M5 galvanised
TSTW 6/M6
Thread
M5
M5
M6
Qty.
10
10
10
Order No.
0178100000
1779100000
0164000000
Terminal rail supports of type TSTW are used for
angled fixing of terminal rails at an angle of 35°.
TSTW 5/M5
Accessories
Terminal rail supports / Mounting feet
TSTW 5/M5 galvanised
F
TSTW 6/M6
TST 2/M5
TST 2/M6
TST
M5
M6
10
10
1286600000
0101700000
50
50
50
0295900000
0642600000
0353500000
The TST terminal rail support is used for assembly
of terminal rails in a frame or over a cut-out
Fixing screws
FKSC M5x8 Ø9
FKSC M6x8 Ø9
FKSC M6x12 Ø9
Weidmüller supplies fixing screws with hexagonal sockets and a very low
head for the terminal rail supports so that the terminals can also be fitted
over the screw.
1282250000 – 2012/2013
F.13
Terminal rail supports / Mounting feet
Mounting feet
7.5
Accessories
4.5
FM 4
Thread
M4
M5
M6
Hole ø 4.2 mm
Qty.
40
40
40
40
Order No.
0687900000
0636800000
0636900000
1724580000
20
20
20
0646260000
0495660000
0646210000
20
20
20
0503500000
0553400000
0334900000
14
Thread or hole
for Ø 4,2 mm
Clip-on foot, steel for TS 35
FM 4
FM 5
FM 6
FM 4.2
50.2
FM 5, FM 6 and FM 4.2: similar to illustrations
MOFU 35/LO/1
Mounting foot, PA orange for TS 35
MOFU 35/LO/1
with holes
MOFU 35
MOFU 35/LO/1
black
MOFU 35
F
MB
Sliding nut for TS 32
MB M3/M5
MB M5/M3
MB M6/M4
M3 and M5
M5 and M3
M6 and M4
Colour
creme
black
grey
The sliding nut for the RS 32 terminal rail has two threaded holes for screws M3
+ M5 / M6 + M4 / M5 + M3.
It is used to fasten components which cannot be slotted directly onto the TS 32,
in particular the smaller TS 15 top hat rail.
This enables, for example, mini-terminals to be snapped onto the TS 15 first,
and this rail is then fastened together with the terminals to the TS 32 using the
sliding nut.
F.14
1282250000 – 2012/2013
Cover strips and retaining plates
ADP
HP
Cover strips
Retaining plates
Accessories
Several German safety regulations, e.g. VBG 4 and
VDE 0106 part 100, call for the active parts of electrical
equipment to be protected against direct contact.
For this purpose, Weidmüller can supply cover strips and
associated retaining plates which can be used for the
common sizes of terminal. Retaining plates are fitted at the
ends of a terminal strip but can also be inserted between
terminals. They are suitable for mounting on TS 32, TS 35
or TS 15 terminal rails.
Spacing of retaining plates:
The distance between the retaining plates for the ADP 1, 2
and 3 cover strips should not exceed 300 mm.
The cover strip is clipped into lugs at the sides, but can
also be fixed to spigots on the retaining plates which can
be provided with a lead seal.
The cover strips are transparent so that terminals with
accessories and markings can be identified at any time.
Additional markings, e.g. groups, can be attached to the
cover strips.
Material: unplasticised PVC
Supplied in 1 m lengths
Temperature limit: max. 70 °C
transparent
Type
ADP 1
Order No.
0485200000
ADP 2
0485300000
ADP 3
0485400000
ADP 4
(1000 mm)
1430760000
grey
Type
ADP 4
(300 mm)
Order No.
1378160000
TSK 31.5
0347960000
Covers
Overall dimensions
A
for mounting on terminal rails
TS 32
ADP 1, HP 1
61
ADP 2, HP 2
77
ADP 3, HP 3
94
ADP 3, HP 4
73.5
ADP 1, HP 8
TSK 31.5, HP 7
Marking materials
Card with warning “lightning flash”, self adhesive
20 pcs. per card
1282250000 – 2012/2013
Material: PA 66
Thickness: 2 mm
For mounting on TS 35 / TS 32, with spigot for lead seal
Type
Order No.
HP 1
0485560000
Spigot for lead seal
HP 2
0485660000
HP 3
0485760000
HP 4
0485860000
For mounting on TS 15
Type
HP 7
Order No.
0258260000
HP 8
0258360000
A
TS 35 x 7.5
56
72
89
68.5
Type
BEZ.-KARTE ADP
A
TS 35 x 15
63
79
86
75.5
A
TS 15
45
35
B
49
62.5
92
92
49
31
F
C
Qty.
10
6
6
6
6
6
6
Order No.
0566700000
F.15
Terminal markers – Introduction
Accessories
Terminal markers
Weidmüller’s multitude of different terminal markers enable
users to solve virtually every labelling task for all types
of wire and cable connectors. Whether multi-character
labelling, ready-to-use markers with standard printing or
individual, custom markers, whether white or coloured or
group designations at terminals, the comprehensive range
of Weidmüller products solves every marking task simply,
quickly and clearly.
The tables on the following pages show which markers fit
the various terminal series. The terminal pitch governs the
selection of a marker. For example, a WDU 2.5 terminal has
a pitch of 5 mm, the WS 12/5 marker is 12 mm long and
suitable for a 5 mm pitch.
W series
Z series
Whole blocks of terminals can be marked as a strip using
the Weidmüller system. When a terminal with a larger pitch
has to be marked (e.g. WDU 16), a smaller marker (e.g.
WS 12/5) can be clipped onto it. Most of the markers are
compatible with each other.
F
The two traditional marker series, DEK and WS, are
available as ready-to-use markers. And these markers are
also available in the MultiCard format for printing by users
themselves.
I series
MultiCards can be printed on with the innovative PrintJet,
Smark Laser, Plotter MCP Plus or MC-Mobilo printing
systems, using M-Print PRO® software.
To see a small selection of the Weidmüller markers, order
our bag of samples, order No. 1646670000.
P series
Owing to the sheer number of possible applications and environmental
influences such as moisture, radiation, gases or heat/cold to which the
products can be exposed, Weidmüller accepts no liability for the suitability
of products in all customer applications. Suitability tests for specific
applications must therefore be carried out by the customer. However,
Weidmüller will be happy to provide help and advice upon request.
F.16
Due to the different identification systems available on the market,
we wish to point out that Weidmüller does not guarantee industrial
identification products if the Weidmüller components (markers –
transparent sleeves – ink/toner/colour ink ribbons – printing systems)
are combined with third-party products, unless Weidmüller has explicitly
agreed for the purpose of an individual application.
1282250000 – 2012/2013
Terminal markers – Selection table
1282250000 – 2012/2013
SchT 9/4
SchT 14/6
WTS 3/4
WGB 5/
WAD 5
WGB 8/
WAD 8
WAD 12
WAD 27
ZGB 15/
ZGB 30
BZT 1
BZT 2
EM 8/30
Other
10/5
10/5
10/5
10/5
10/5
10/5
10/5
10/5
-
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
-
x
x
x
x
x
x3)
x
-
x
x
x
x
-
x
x
x
-
-
-
-
-
x
x
x
x
x
x
x
x
-
-
-
-
-
Accessories
SchT 7
ADK 1
6
6
AKA 4
6
6
AKE 2.5/AKZ 2.5...
5
5
AKE 2.5
5.1
5
AKE 4
7
6.5
AKZ 1.5...
5
5
AKZ 1.5-2.5
5.1
5
AKZ 4
6.1
6
AKZ 4.../AKB 4...
6
6
8/5
AL 1
6.5
6.5
ASK 1
8
8
AST 1-4/35
6.2
6
AST 5/35
6.5
6
BZT ZVL 1.5
5.08
5
12/5
DK 4…
6
6
DKT 4…
6
6
DLA 2.5...
6
6
8/5
DLD 2.5...
6
6
8/5
DLI 2.5
6
6
8/5
EK 10
10
5
EK 16
12
5
EK 2.5…
6
6
EK 35…
16
5
EK 4…
6.5
6.5
EK 6/35
8
8
EW 15
9.5
5
12/5
EW 15/2
8
5
EW 35
8.5
5
8/5
EWK
8.5
5
8/5
EWK 1
8.5
5
8/5
EWK 2
8.5
5
8/5
IAK 1.5N 3L
5
5
10/52)
IDK 1.5N
5
5
10/52)
IDK 1.5N/V
5
5
10/52)
IDU 1.5 N ...
5
5
10/52)
IEK 1.5N...
5
5
10/52)
IIK 1.5N...
5
5
10/52)
IPE 1.5N...
5
5
10/52)
ITR 1.5N...
5
5
10/52)
KDKS 1…
8
8
KMVF…
6
5
KSKM…
13
5
KST…
24-34
5
MAK 2.5/VLI 1.5...
6
6
8/5
NT…
6-12
6
PDK 2.5/4 5
5
12/5
PDL 4... 5
5
12/5
PDU 16
12
10/12
PDU 2.5/4...
5
5
12/5
PDU 6/10...
8
8
10/8
PEI 16
12
10/12
PNT 16
12
10/12
PNT 2.5/4 5
5
12/5
PNT 6/10
8
8
10/8
PPE 16
12
10/12
PPE 2.5/4 5
5
12/5
PPE 6/10
8
8
10/8
PTR 2.5/4…
5.1
5/5
10/5
RSF 1-3…
8
5
SAK 10…
10
5
SAK 16…
12
5
SAK 2.5
6.1
6
SAK 2.5/35
5
5
SAK 35…
18
5
SAK 4…
6.5
6.5
SAK 6…
8
8
SAK 95/35
28
5
SAKA 10
12
5
SAKB 10
10
5
SAKC 10/35
12
6.5
SAKC 4/35
6.5
6.5
SAKD 2.5N
5
5
SAKG…
32-54
5
SAKH 35
18
6.5
SAKH 4-10
6.5-14
5
SAKK 10..
11.5
5
SAKK 4..
8
6.5
SAKR…
6.5
6.5
SAKS….
13-28
5
SAKT…
8
6.5
VWGK 4…
10
5/5
12/6.5
VWGK 6…
10
5/5
12/6.5
1) = WS 10/6 Middle; 2) = WS 10/5 Middle; 3) = SnapMark
ZS
WS
DEK
Designation
Terminal
width
Selection table
F
F.17
ZS
SchT 7
SchT 9/4
SchT 14/6
WTS 3/4
WGB 5/
WAD 5
WGB 8/
WAD 8
WAD 12
WAD 27
ZGB 15/
ZGB 30
BZT 1
BZT 2
EM 8/30
3.5
5
6
5.08
5.08
5
5
6
6.5
6.2
32
16
27
20.5
5.08
5.08
7.62
5.08
5.08
3.5
5.08
5
10
10
12
12
5
5
5
5
5
5
7.62
36
16
6
6
18.5
8
27
6
12.2
12.2
8
35.6
35.6
13
19.6
24.6
42
55
55
27
32
10.1
12.1
15.1
8.1
18.8
25
6
10
12
5
16
6
8
20.5
3.5
5
6
5
5
5
5
6
6.5
6
5
5
5
5
5
5
5
5
5
3.5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
5
8
8
6
5
5
8
6
6
6
6
6
5
5
5
5
5
5/5
5/5
5/5
5/8
6/5
5/8
6
5
5
5
5
6
8
5
8/5
8/5
8/5
8/5
8/5
8/5
8/5
8/5
8/5
10/5
12/5
12/5
12/5
12/5
12/5
12/5
12/5
12/5
12/5
12/5
12/5
12/5
12/5
12/5
12/5
12/5
12/5
12/5
12/5
12/5
12/5
12/6
12/6
12/5
12/8
15/5
12/6
12/5
12/5
12/5
15/5
15/5
15/5
15/5
15/5
12/6.5
12/6.5
12/6.5
12/5
12/6.5
12/6.5
12/6.5
12/6.5
10/8
12/6
12/5
12/5
12/5
12/5
12/6
12/5
12/5
-
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
-
x
x
x
x
-
x
x
-
x
x
x
-
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
-
-
x
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
3.5
5
10
32
12
12
5
5
5
16
6
6
3.5
5
5
8
5
5
5
5
5
5
6
6
12/3.5
12/5
12/5
12/6.5
12/5
12/5
12/5
12/5
12/5
12/5
12/6
12/6
-
x
x
x
x
x
x
x
x
-
x
x
x
x
x
x
x
x
-
x
x
x
x
x
x
x
x
-
x
x
x
x
x
x
x
x
-
-
-
-
-
x
x
x
x
x
x
x
x
-
-
-
-
WPDB…
WPE 1.5/R3.5
WPE 1.5/ZZ
WPE 10...
WPE 120
WPE 16
WPE 16 N
WPE 2.5 N (WPE 1.5)
WPE 2.5...
WPE 2.5/1.5/ZR
WPE 35...
WPE 4
WPE 4N
F.18
Other
WS
F
WDK 1.5/R 3.5...
WDK 2.5 ...
WDK 2.5 800V
WDK 2.5/BLA R5.08
WDK 2.5/BLZ R5.08
WDK 2.5N...
WDK 4N...
WDL 2.5/...
WDT 1.5
WDTR 2.5...
WDU (WPE) 120/150
WDU (WPE) 35 N
WDU (WPE) 70/95
WDU (WPE) 70N
WDU 1.5 LD/BLA
WDU 1.5/BLA
WDU 1.5/BLZ R7.62
WDU 1.5/BLZ/5.08
WDU 1.5/BLZ/LD/5.08
WDU 1.5/R 3.5...
WDU 1.5/R/BLA
WDU 1.5/ZZ
WDU 10 SL
WDU 10...
WDU 16 (/ZA)
WDU 16 N
WDU 2.5 F
WDU 2.5 FF
WDU 2.5 N (WDU 1.5)
WDU 2.5 TC...
WDU 2.5...
WDU 2.5/1.5/ZZ
WDU 2.5/BLZ R7.62
WDU 240...
WDU 35
WDU 4 ...
WDU 4N ...
WDU 50N
WDU 6 ...
WDU 95N
WDUL 4
WEW 32/1
WEW 35/1
WEW 35/2
WF 10...
WF 12...
WF 5...
WF 6...
WF 8...
WFF 120...
WFF 185...
WFF 300...
WFF 35...
WFF 70...
WGK 10.../WGKV 10..
WGK 16…
WGK 25…/WGKV 25…
WGK 4…/WGKV 4…
WGK 50…
WGK 95…
WMA 4...
WNT 10
WNT 16 N
WNT 2.5
WNT 35 N
WNT 4
WNT 6
WNT 70 N
DEK
Accessories
Designation
Terminal
width
Terminal markers – Selection table
LM MT3000
15x9 GE
-
1282250000 – 2012/2013
1282250000 – 2012/2013
SchT 7
SchT 9/4
SchT 14/6
WTS 3/4
WGB 5/
WAD 5
WGB 8/
WAD 8
WAD 12
WAD 27
ZGB 15/
ZGB 30
BZT 1
BZT 2
EM 8/30
8
8
8
6
8
8
8
6
8
8
8
8
5
6
3.5
3.5
5
5
5/5
6
8
5
5
5
5
5
5
5
5
5
5
5
5
5/5
5
6
6
8
8
3.5
5
5
5
5
8
8
5
5
5
5
5
6
8
5/5
8
5
5
8
5
6
5
8
8
5
5
5
12/6.5
12/5
15/5
10/6
12/5
12/6.5
12/5
12/6
12/6
12/8
12/8
12/8
12/8
12/5
12/6
12/6
12/3.5
12/5
10/5
10/5
10/5
10/5
10/5
12/5
12/5
10/5
12/5
10/5
12/5
12/5
10/5
12/5
12/6
12/6
12/8
12/8
12/3.5
8/5
10/5
8/5
12/5
12/6
8/5
10/5
10/5
10/6
10/6
10/5
12/6
12/5
8/5
12/5
12/5
12/6
10/5
12/6.5
12/6.5
10/5
12/5
14/5
-
x
-
x
-
x
-
x
x
x
-
-
-
-
x
x
x
x
-
-
-
15/5
10/5
12/6
10/5
10/5
10/5
10/5
10/5
15/5
15/5
15/5
15/5
15/5
15/5
15/5
15/5
12/6
12/6
15/5
12/6
15/5
10/5
15/5
15/5
12/6
15/5
15/5
10/5
12/6
12/6
10/5
12/6
15/5
10/5
15/5
15/5
12/6
10/5
10/5
15/5
10/5
-
x
x
x
x
x
x
-
x
x
-
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
-
-
-
-
-
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
-
x
x
x
x
x
x
x
x
x
x
-
x
x
x
x
x
x
x
x
x
x
-
x
-
ESG 6/15
ZAD 9/4
ZAD 9/4
-
Accessories
ZS
18.5
8
27
6
18
8
12
8
16
6
8
8
8
8
5
32
6
3.8
3.5
5
5
5.1
6
8
5
5
5
5
5
5
10
10
12
12
5
5
5.1
16
6
6
8
8
3.5
5
5
5
16
10
8
5.08
5
10
12
5
6
8
5.1
12
5.08
5
8
12
8
5
8
8
5
5
5
Other
WS
WPE 50N
WPE 6
WPE 95N/120N
WPO 4
WSI 25…
WSI 6...
WSI 6/2...
WTD 6/1
WTL 35
WTL 4 ...
WTL 6/1...
WTL 6/2
WTL 6/3...
WTQ 6/1
WTR 2.5 ...
WTR 35 E
WTR 4...
ZAP/TW ZIA 1.5/...
ZDK 1.5...
ZDK 2.5...
ZDK 2.5-2...
ZDK 2.5N…
ZDK 4/S/...
ZDK 6/S/...
ZDKPE 2.5
ZDL 2.5/...
ZDLD 2.5-2...
ZDT 2.5 ...
ZDTPE 2.5...
ZDTR 2.5
ZDU (ZPE) 10
ZDU (ZPE) 10/S...
ZDU (ZPE) 16...
ZDU (ZPE) 16/S...
ZDU (ZPE) 2.5 ...
ZDU (ZPE) 2.5-2/...
ZDU (ZPE) 2.5N…
ZDU (ZPE) 35...
ZDU (ZPE) 4...
ZDU (ZPE) 4-2...
ZDU (ZPE) 6...
ZDU (ZPE) 6-2...
ZDU 1.5...
ZDUA (ZPEA) 2.5-2
ZDUA 2.5-2N
ZDUB (ZPEB) 2.5-2/...
ZEI 16
ZEI 6
ZEW 35/2
ZIA 1.5 ...
ZMAK 2.5
ZNT 10/S
ZNT 16/S
ZNT 2.5/S
ZNT 4/S
ZNT 6/S
ZP 2.5...
ZPE 16-2/1 AN
ZPV 1.5
ZRV 1.5...
ZSI 2.5...
ZSI 2.5/2...
ZSI 6-2/FC
ZT 2.5 ...
ZTD 6
ZTL 6
ZTPE 2.5 ...
ZTR 2.5...
ZTR 2.5-2...
DEK
Designation
Terminal
width
Terminal markers – Selection table
F
F.19
Terminal markers – DEK standard printing
Accessories
DEK card with printing
The Dekafix marker is the universal marker for terminals and plug-in connectors
as well as electronic modules from the Weidmüller product range. Dekafix
provides you with a wide range of standard printing options. The system is
particularly suitable for short sequences of numbers and is also available with
customer specific printing.
GW
FWZ
blank
FS
•In strips for fast installation
•Large selection of ready-to-use printed markers
•Excellent printing quality thanks to the MC Laser
•Available in 4 widths
•Custom printing also possible
F
Technical data
Material
UL94 flammability rating
Temperature range
Printing
Polyamide 66, halogen-free
V2
–40 °C to 100 °C
black
Ordering data
Colour
Available in all colours of the international colour code; for MC
on request
● brown
● red
● orange
● yellow
● green
● blue
● violet
● grey
white
Qty.
500 pcs
Pitch
DEK 5 = 5 mm : DEK 6 = 6 mm : DEK 6.5 = 6.5 mm : DEK 8 = 8 mm
FW = consecutive horizontal
e.g. DEK 5 FW 1-50
Printing variations
FS = consecutive vertical
e.g. DEK 5 FS 51-100
FWZ = consecutive horizontal line
e.g. DEK 5 FWZ 1-10
FSZ = consecutive vertical line
e.g. DEK 5 FSZ 21-30
GW = identical horizontal
e.g. DEK 5 GW A
GS = identical vertical
e.g. DEK 5 GS B
No. of characters
horizontal
vertical
Dek 5
max. 3 characters
max. 3 characters
Dek 6
max. 3 characters
max. 3 characters
Dek 6.5
max. 4 characters
max. 3 characters
Dek 8
max. 5 characters
max. 3 characters
Specifications for custom printing Colour and print specifications
F.20
1282250000 – 2012/2013
Terminal markers – DEK standard printing
Type/Print
DEK 5 BL NEUTRAL
DEK 5 BR NEUTRAL
DEK 5 FS 1-50
DEK 5 FS 101-150
DEK 5 FS 151-200
DEK 5 FS 201-250
DEK 5 FS 251-300
DEK 5 FS 301-350
DEK 5 FS 351-400
DEK 5 FS 401-450
DEK 5 FS 451-500
DEK 5 FS 501-550
DEK 5 FS 51-100
DEK 5 FS 551-600
DEK 5 FS 601-650
DEK 5 FS 651-700
DEK 5 FS 701-750
DEK 5 FS 751-800
DEK 5 FS 801-850
DEK 5 FS 851-900
DEK 5 FS 901-950
DEK 5 FS 951-999
DEK 5 FSZ 1-10
DEK 5 FSZ 11-20
DEK 5 FSZ 21-30
DEK 5 FSZ 31-40
DEK 5 FSZ 41-50
DEK 5 FSZ 51-60
DEK 5 FSZ 61-70
DEK 5 FSZ 71-80
DEK 5 FSZ 81-90
DEK 5 FSZ 91-100
DEK 5 FW 1,3,5,...99
DEK 5 FW 1-50
DEK 5 FW 10-500
DEK 5 FW 101-150
DEK 5 FW 151-200
DEK 5 FW 2,4,...100
DEK 5 FW 201-250
DEK 5 FW 251-300
DEK 5 FW 301-350
DEK 5 FW 351-400
DEK 5 FW 401-450
DEK 5 FW 451-500
DEK 5 FW 501-550
DEK 5 FW 51-100
DEK 5 FW 551-600
DEK 5 FW 601-650
DEK 5 FW 651-700
DEK 5 FW 701-750
DEK 5 FW 751-800
DEK 5 FW 801-850
DEK 5 FW 851-900
DEK 5 FW 901-950
DEK 5 FW 951-999
DEK 5 FW U1-PE1
DEK 5 FW U2-PE2
DEK 5 FW U3-PE3
DEK 5 FW U4-PE4
DEK 5 FW U5-PE5
DEK 5 FW U6-PE6
DEK 5 FW U7-PE7
DEK 5 FW U8-PE8
DEK 5 FW U9-PE9
DEK 5 FW X1-Z1
DEK 5 FW X10-Z10
DEK 5 FW X2-Z2
DEK 5 FW X3-Z3
DEK 5 FW X4-Z4
DEK 5 FW X5-Z5
DEK 5 FW X6-Z6
DEK 5 FW X7-Z7
1282250000 – 2012/2013
Order No.
0473391693
0473391692
0473560001
0473560101
0473560151
0473560201
0473560251
0473560301
0473560351
0473560401
0473560451
0473560501
0473560051
0473560551
0473560601
0473560651
0473560701
0473560751
0473560801
0473560851
0473560901
0473560951
0460660001
0460660011
0460660021
0460660031
0460660041
0460660051
0460660061
0460660071
0460660081
0460660091
1358460000
0473460001
0132660010
0473460101
0473460151
1358560000
0473460201
0473460251
0473460301
0473460351
0473460401
0473460451
0473460501
0473460051
0473460551
0473460601
0473460651
0473460701
0473460751
0473460801
0473460851
0473460901
0473460951
0133161114
0133161115
0133161116
0133161117
0133161118
0133161119
0133161120
0133161121
0133161122
0133261150
0133261159
0133261151
0133261152
0133261153
0133261154
0133261155
0133261156
Type/Print
DEK 5 FW X8-Z8
DEK 5 FW X9-Z9
DEK 5 FWZ 1-10
DEK 5 FWZ 1-19
DEK 5 FWZ 1-9
DEK 5 FWZ 11-20
DEK 5 FWZ 2-20
DEK 5 FWZ 21-30
DEK 5 FWZ 21-39
DEK 5 FWZ 22-40
DEK 5 FWZ 31-40
DEK 5 FWZ 41-50
DEK 5 FWZ 41-59
DEK 5 FWZ 42-60
DEK 5 FWZ 51-60
DEK 5 FWZ 61-70
DEK 5 FWZ 71-80
DEK 5 FWZ 81-90
DEK 5 FWZ 91-100
DEK 5 FWZ L1-EIK
DEK 5 FWZ L1-PE
DEK 5 FWZ U,V,W,N,PE
DEK 5 GE NEUTRAL
DEK 5 GN NEUTRAL
DEK 5 GR NEUTRAL
DEK 5 GS A
DEK 5 GS B
DEK 5 GS C
DEK 5 GS D
DEK 5 GS E
DEK 5 GS F
DEK 5 GS G
DEK 5 GS H
DEK 5 GS I
DEK 5 GS J
DEK 5 GS K
DEK 5 GS L
DEK 5 GS M
DEK 5 GS N
DEK 5 GS O
DEK 5 GS P
DEK 5 GS PE
DEK 5 GS Q
DEK 5 GS R
DEK 5 GS S
DEK 5 GS T
DEK 5 GS U
DEK 5 GS V
DEK 5 GS W
DEK 5 GS X
DEK 5 GS Y
DEK 5 GS Z
DEK 5 GS g
DEK 5 GS h
DEK 5 GW
DEK 5 GW 1
DEK 5 GW 2
DEK 5 GW 3
DEK 5 GW 4
DEK 5 GW 5
DEK 5 GW 6
DEK 5 GW 7
DEK 5 GW 8
DEK 5 GW 9
DEK 5 GW 10
DEK 5 GW 11
DEK 5 GW 12
DEK 5 GW 13
DEK 5 GW 14
DEK 5 GW 15
DEK 5 GW 16
DEK 5 GW 17
Order No.
0133261157
0133261158
0523060001
0235860000
1572000000
0523060011
0236160000
0523060021
0235960000
0236260000
0523060031
0523060041
0236060000
0236360000
0523060051
0523060061
0523060071
0523060081
0523060091
0354361203
0354361187
0558360000
0473391687
0473391688
0473391691
0132961021
0132961022
0132961023
0132961024
0132961025
0132961026
0132961027
0132961028
0132961029
0132961030
0132961031
0132961032
0132961033
0132961034
0132961035
0132961036
0157261187
0132961037
0132961038
0132961039
0132961040
0132961041
0132961042
0132961043
0132961044
0132961045
0132961046
0157261202
0157261203
0576260000
0522660001
0522660002
0522660003
0522660004
0522660005
0522660006
0522660007
0522660008
0522660009
0522660010
0522660011
0522660012
0522660013
0522660014
0522660015
0522660016
0522660017
Type/Print
DEK 5 GW 18
DEK 5 GW 19
DEK 5 GW 20
DEK 5 GW 21
DEK 5 GW 22
DEK 5 GW 23
DEK 5 GW 24
DEK 5 GW 25
DEK 5 GW 26
DEK 5 GW 27
DEK 5 GW 28
DEK 5 GW 29
DEK 5 GW 30
DEK 5 GW 31
DEK 5 GW 32
DEK 5 GW 33
DEK 5 GW 34
DEK 5 GW 35
DEK 5 GW 36
DEK 5 GW 37
DEK 5 GW 38
DEK 5 GW 39
DEK 5 GW 40
DEK 5 GW 41
DEK 5 GW 42
DEK 5 GW 43
DEK 5 GW 44
DEK 5 GW 45
DEK 5 GW 46
DEK 5 GW 47
DEK 5 GW 48
DEK 5 GW 49
DEK 5 GW 50
DEK 5 GW 51
DEK 5 GW 52
DEK 5 GW 53
DEK 5 GW 54
DEK 5 GW 55
DEK 5 GW 56
DEK 5 GW 57
DEK 5 GW 58
DEK 5 GW 59
DEK 5 GW 60
DEK 5 GW 61
DEK 5 GW 62
DEK 5 GW 63
DEK 5 GW 64
DEK 5 GW 65
DEK 5 GW 66
DEK 5 GW 67
DEK 5 GW 68
DEK 5 GW 69
DEK 5 GW 70
DEK 5 GW 71
DEK 5 GW 72
DEK 5 GW 73
DEK 5 GW 74
DEK 5 GW 75
DEK 5 GW 76
DEK 5 GW 77
DEK 5 GW 78
DEK 5 GW 79
DEK 5 GW 80
DEK 5 GW 81
DEK 5 GW 82
DEK 5 GW 83
DEK 5 GW 84
DEK 5 GW 85
DEK 5 GW 86
DEK 5 GW 87
DEK 5 GW 88
DEK 5 GW 89
Order No.
0522660018
0522660019
0522660020
0522660021
0522660022
0522660023
0522660024
0522660025
0522660026
0522660027
0522660028
0522660029
0522660030
0522660031
0522660032
0522660033
0522660034
0522660035
0522660036
0522660037
0522660038
0522660039
0522660040
0522660041
0522660042
0522660043
0522660044
0522660045
0522660046
0522660047
0522660048
0522660049
0522660050
0522660051
0522660052
0522660053
0522660054
0522660055
0522660056
0522660057
0522660058
0522660059
0522660060
0522660061
0522660062
0522660063
0522660064
0522660065
0522660066
0522660067
0522660068
0522660069
0522660070
0522660071
0522660072
0522660073
0522660074
0522660075
0522660076
0522660077
0522660078
0522660079
0522660080
0522660081
0522660082
0522660083
0522660084
0522660085
0522660086
0522660087
0522660088
0522660089
Type/Print
DEK 5 GW 90
DEK 5 GW 91
DEK 5 GW 92
DEK 5 GW 93
DEK 5 GW 94
DEK 5 GW 95
DEK 5 GW 96
DEK 5 GW 97
DEK 5 GW 98
DEK 5 GW 99
DEK 5 GW 100
DEK 5 GW 101
DEK 5 GW 102
DEK 5 GW 103
DEK 5 GW 104
DEK 5 GW 105
DEK 5 GW 106
DEK 5 GW 107
DEK 5 GW 108
DEK 5 GW 109
DEK 5 GW 110
DEK 5 GW 111
DEK 5 GW 112
DEK 5 GW 113
DEK 5 GW 114
DEK 5 GW 115
DEK 5 GW 116
DEK 5 GW 117
DEK 5 GW 118
DEK 5 GW 119
DEK 5 GW 120
DEK 5 GW 121
DEK 5 GW 122
DEK 5 GW 123
DEK 5 GW 124
DEK 5 GW 125
DEK 5 GW 126
DEK 5 GW 127
DEK 5 GW 128
DEK 5 GW 129
DEK 5 GW 130
DEK 5 GW 131
DEK 5 GW 132
DEK 5 GW 133
DEK 5 GW 134
DEK 5 GW 135
DEK 5 GW 136
DEK 5 GW 137
DEK 5 GW 138
DEK 5 GW 139
DEK 5 GW 140
DEK 5 GW 141
DEK 5 GW 142
DEK 5 GW 143
DEK 5 GW 144
DEK 5 GW 145
DEK 5 GW 146
DEK 5 GW 147
DEK 5 GW 148
DEK 5 GW 149
DEK 5 GW 150
DEK 5 GW 151
DEK 5 GW 152
DEK 5 GW 153
DEK 5 GW 154
DEK 5 GW 155
DEK 5 GW 156
DEK 5 GW 157
DEK 5 GW 158
DEK 5 GW 159
DEK 5 GW 160
DEK 5 GW 161
Order No.
0522660090
0522660091
0522660092
0522660093
0522660094
0522660095
0522660096
0522660097
0522660098
0522660099
0522660100
0522660101
0522660102
0522660103
0522660104
0522660105
0522660106
0522660107
0522660108
0522660109
0522660110
0522660111
0522660112
0522660113
0522660114
0522660115
0522660116
0522660117
0522660118
0522660119
0522660120
0522660121
0522660122
0522660123
0522660124
0522660125
0522660126
0522660127
0522660128
0522660129
0522660130
0522660131
0522660132
0522660133
0522660134
0522660135
0522660136
0522660137
0522660138
0522660139
0522660140
0522660141
0522660142
0522660143
0522660144
0522660145
0522660146
0522660147
0522660148
0522660149
0522660150
0522660151
0522660152
0522660153
0522660154
0522660155
0522660156
0522660157
0522660158
0522660159
0522660160
0522660161
Accessories
Versions DEK
F
F.21
Terminal markers – DEK standard printing
Accessories
Versions DEK
F
F.22
Type/Print
DEK 5 GW 162
DEK 5 GW 163
DEK 5 GW 164
DEK 5 GW 165
DEK 5 GW 166
DEK 5 GW 167
DEK 5 GW 168
DEK 5 GW 169
DEK 5 GW 170
DEK 5 GW 171
DEK 5 GW 172
DEK 5 GW 173
DEK 5 GW 174
DEK 5 GW 175
DEK 5 GW 176
DEK 5 GW 177
DEK 5 GW 178
DEK 5 GW 179
DEK 5 GW 180
DEK 5 GW 181
DEK 5 GW 182
DEK 5 GW 183
DEK 5 GW 184
DEK 5 GW 185
DEK 5 GW 186
DEK 5 GW 187
DEK 5 GW 188
DEK 5 GW 189
DEK 5 GW 190
DEK 5 GW 191
DEK 5 GW 192
DEK 5 GW 193
DEK 5 GW 194
DEK 5 GW 195
DEK 5 GW 196
DEK 5 GW 197
DEK 5 GW 198
DEK 5 GW 199
DEK 5 GW 200
DEK 5 GW A
DEK 5 GW B
DEK 5 GW BL/SW DEK 5 GW C
DEK 5 GW D
DEK 5 GW E
DEK 5 GW F
DEK 5 GW G
DEK 5 GW H
DEK 5 GW I
DEK 5 GW J
DEK 5 GW K
DEK 5 GW L
DEK 5 GW L1
DEK 5 GW L2
DEK 5 GW L3
DEK 5 GW M
DEK 5 GW MP
DEK 5 GW N
DEK 5 GW O
DEK 5 GW P
DEK 5 GW PE
DEK 5 GW PEN
DEK 5 GW Q
DEK 5 GW R
DEK 5 GW RT/SW +
DEK 5 GW S
DEK 5 GW T
DEK 5 GW U
DEK 5 GW V
DEK 5 GW W
DEK 5 GW W-STROM
DEK 5 GW X
Order No.
0522660162
0522660163
0522660164
0522660165
0522660166
0522660167
0522660168
0522660169
0522660170
0522660171
0522660172
0522660173
0522660174
0522660175
0522660176
0522660177
0522660178
0522660179
0522660180
0522660181
0522660182
0522660183
0522660184
0522660185
0522660186
0522660187
0522660188
0522660189
0522660190
0522660191
0522660192
0522660193
0522660194
0522660195
0522660196
0522660197
0522660198
0522660199
0522660200
0522761021
0522761022
0576291741
0522761023
0522761024
0522761025
0522761026
0522761027
0522761028
0522761029
0522761030
0522761031
0522761032
0522361075
0522361076
0522361077
0522761033
0537261235
0522761034
0522761035
0522761036
0537261187
0537261188
0522761037
0522761038
0576291737
0522761039
0522761040
0522761041
0522761042
0522761043
0576261215
0522761044
Type/Print
DEK 5 GW Y
DEK 5 GW Z
DEK 5 GW +
DEK 5 GW DEK 5 GW g
DEK 5 GW h
DEK 5 NEUTRAL
DEK 5 OR NEUTRAL
DEK 5 RT NEUTRAL
DEK 5 SW NEUTRAL
DEK 5 VI NEUTRAL
Order No.
0522761045
0522761046
0576261198
0576261199
0576261202
0576261203
0473360000
0473391690
0473391686
0473391694
0473391689
DEK 5/3,5 MC FS 1-10
DEK 5/3,5 MC FS 101-110
DEK 5/3,5 MC FS 11-20
DEK 5/3,5 MC FS 111-120
DEK 5/3,5 MC FS 121-130
DEK 5/3,5 MC FS 131-140
DEK 5/3,5 MC FS 141-150
DEK 5/3,5 MC FS 21-30
DEK 5/3,5 MC FS 31-40
DEK 5/3,5 MC FS 41-50
DEK 5/3,5 MC FS 51-60
DEK 5/3,5 MC FS 61-70
DEK 5/3,5 MC FS 71-80
DEK 5/3,5 MC FS 81-90
DEK 5/3,5 MC FS 91-100
DEK 5/3,5 MC GW 0
DEK 5/3,5 MC GW 1
DEK 5/3,5 MC GW 2
DEK 5/3,5 MC GW 3
DEK 5/3,5 MC GW 4
DEK 5/3,5 MC GW 5
DEK 5/3,5 MC GW 6
DEK 5/3,5 MC GW 7
DEK 5/3,5 MC GW 8
DEK 5/3,5 MC GW 9
1762320001
1762320101
1762320011
1762320111
1762320121
1762320131
1762320141
1762320021
1762320031
1762320041
1762320051
1762320061
1762320071
1762320081
1762320091
1755281000
1755280001
1755280002
1755280003
1755280004
1755280005
1755280006
1755280007
1755280008
1755280009
DEK 6 BL NEUTRAL
DEK 6 BR NEUTRAL
DEK 6 FS 1-50
DEK 6 FS 101-150
DEK 6 FS 151-200
DEK 6 FS 201-250
DEK 6 FS 251-300
DEK 6 FS 301-350
DEK 6 FS 351-400
DEK 6 FS 401-450
DEK 6 FS 451-500
DEK 6 FS 501-550
DEK 6 FS 51-100
DEK 6 FS 551-600
DEK 6 FS 601-650
DEK 6 FS 651-700
DEK 6 FS 701-750
DEK 6 FS 751-800
DEK 6 FS 801-850
DEK 6 FS 851-900
DEK 6 FS 901-950
DEK 6 FS 951-999
DEK 6 FSZ 1-10
DEK 6 FSZ 11-20
DEK 6 FSZ 21-30
DEK 6 FSZ 31-40
DEK 6 FSZ 41-50
DEK 6 FSZ 51-60
DEK 6 FSZ 61-70
DEK 6 FSZ 71-80
DEK 6 FSZ 81-90
DEK 6 FSZ 91-100
DEK 6 FW 1,3,5...99
DEK 6 FW 1-5 (10X)
0468591693
0468591692
0468760001
0468760101
0468760151
0468760201
0468760251
0468760301
0468760351
0468760401
0468760451
0468760501
0468760051
0468760551
0468760601
0468760651
0468760701
0468760751
0468760801
0468760851
0468760901
0468760951
0133360001
0133360011
0133360021
0133360031
0133360041
0133360051
0133360061
0133360071
0133360081
0133360091
1358660000
0688660000
Type/Print
DEK 6 FW 1-50
DEK 6 FW 101-150
DEK 6 FW 151-200
DEK 6 FW 2,4,...100
DEK 6 FW 201-250
DEK 6 FW 251-300
DEK 6 FW 301-350
DEK 6 FW 351-400
DEK 6 FW 401-450
DEK 6 FW 451-500
DEK 6 FW 501-550
DEK 6 FW 51-100
DEK 6 FW 551-600
DEK 6 FW 601-650
DEK 6 FW 651-700
DEK 6 FW 701-750
DEK 6 FW 751-800
DEK 6 FW 801-850
DEK 6 FW 851-900
DEK 6 FW 901-950
DEK 6 FW 951-999
DEK 6 FW L,N,PE
DEK 6 FWZ 1-10
DEK 6 FWZ 101-110
DEK 6 FWZ 11-20
DEK 6 FWZ 111-120
DEK 6 FWZ 121-130
DEK 6 FWZ 131-140
DEK 6 FWZ 141-150
DEK 6 FWZ 151-160
DEK 6 FWZ 161-170
DEK 6 FWZ 171-180
DEK 6 FWZ 181-190
DEK 6 FWZ 191-200
DEK 6 FWZ 201-210
DEK 6 FWZ 21-30
DEK 6 FWZ 31-40
DEK 6 FWZ 41-50
DEK 6 FWZ 51-60
DEK 6 FWZ 61-70
DEK 6 FWZ 71-80
DEK 6 FWZ 81-90
DEK 6 FWZ 91-100
DEK 6 FWZ L1-h
DEK 6 FWZ L1-PE
DEK 6 FWZ R,S,T,N,g
DEK 6 GE NEUTRAL
DEK 6 GN NEUTRAL
DEK 6 GR NEUTRAL
DEK 6 GW 0
DEK 6 GW 1
DEK 6 GW 2
DEK 6 GW 3
DEK 6 GW 4
DEK 6 GW 5
DEK 6 GW 6
DEK 6 GW 7
DEK 6 GW 8
DEK 6 GW 9
DEK 6 GW 10
DEK 6 GW 11
DEK 6 GW 12
DEK 6 GW 13
DEK 6 GW 14
DEK 6 GW 15
DEK 6 GW 16
DEK 6 GW 17
DEK 6 GW 18
DEK 6 GW 19
DEK 6 GW 20
DEK 6 GW 21
DEK 6 GW 22
Order No.
0468660001
0468660101
0468660151
1358760000
0468660201
0468660251
0468660301
0468660351
0468660401
0468660451
0468660501
0468660051
0468660551
0468660601
0468660651
0468660701
0468660751
0468660801
0468660851
0468660901
0468660951
0632560000
0518960001
0518960101
0518960011
0518960111
0518960121
0518960131
0518960141
0518960151
0518960161
0518960171
0518960181
0518960191
0518960201
0518960021
0518960031
0518960041
0518960051
0518960061
0518960071
0518960081
0518960091
0631961203
0631961187
0631860000
0468591687
0468591688
0468591691
0526961000
0526960001
0526960002
0526960003
0526960004
0526960005
0526960006
0526960007
0526960008
0526960009
0526960010
0526960011
0526960012
0526960013
0526960014
0526960015
0526960016
0526960017
0526960018
0526960019
0526960020
0526960021
0526960022
Type/Print
DEK 6 GW 23
DEK 6 GW 24
DEK 6 GW 25
DEK 6 GW 26
DEK 6 GW 27
DEK 6 GW 28
DEK 6 GW 29
DEK 6 GW 30
DEK 6 GW 31
DEK 6 GW 32
DEK 6 GW 33
DEK 6 GW 34
DEK 6 GW 35
DEK 6 GW 36
DEK 6 GW 37
DEK 6 GW 38
DEK 6 GW 39
DEK 6 GW 40
DEK 6 GW 41
DEK 6 GW 42
DEK 6 GW 43
DEK 6 GW 44
DEK 6 GW 45
DEK 6 GW 46
DEK 6 GW 47
DEK 6 GW 48
DEK 6 GW 49
DEK 6 GW 50
DEK 6 GW 51
DEK 6 GW 52
DEK 6 GW 53
DEK 6 GW 54
DEK 6 GW 55
DEK 6 GW 56
DEK 6 GW 57
DEK 6 GW 58
DEK 6 GW 59
DEK 6 GW 60
DEK 6 GW 61
DEK 6 GW 62
DEK 6 GW 63
DEK 6 GW 64
DEK 6 GW 65
DEK 6 GW 66
DEK 6 GW 67
DEK 6 GW 68
DEK 6 GW 69
DEK 6 GW 70
DEK 6 GW 71
DEK 6 GW 72
DEK 6 GW 73
DEK 6 GW 74
DEK 6 GW 75
DEK 6 GW 76
DEK 6 GW 77
DEK 6 GW 78
DEK 6 GW 79
DEK 6 GW 80
DEK 6 GW 81
DEK 6 GW 82
DEK 6 GW 83
DEK 6 GW 84
DEK 6 GW 85
DEK 6 GW 86
DEK 6 GW 87
DEK 6 GW 88
DEK 6 GW 89
DEK 6 GW 90
DEK 6 GW 91
DEK 6 GW 92
DEK 6 GW 93
DEK 6 GW 94
Order No.
0526960023
0526960024
0526960025
0526960026
0526960027
0526960028
0526960029
0526960030
0526960031
0526960032
0526960033
0526960034
0526960035
0526960036
0526960037
0526960038
0526960039
0526960040
0526960041
0526960042
0526960043
0526960044
0526960045
0526960046
0526960047
0526960048
0526960049
0526960050
0526960051
0526960052
0526960053
0526960054
0526960055
0526960056
0526960057
0526960058
0526960059
0526960060
0526960061
0526960062
0526960063
0526960064
0526960065
0526960066
0526960067
0526960068
0526960069
0526960070
0526960071
0526960072
0526960073
0526960074
0526960075
0526960076
0526960077
0526960078
0526960079
0526960080
0526960081
0526960082
0526960083
0526960084
0526960085
0526960086
0526960087
0526960088
0526960089
0526960090
0526960091
0526960092
0526960093
0526960094
1282250000 – 2012/2013
Terminal markers – DEK standard printing
Type/Print
DEK 6 GW 95
DEK 6 GW 96
DEK 6 GW 97
DEK 6 GW 98
DEK 6 GW 99
DEK 6 GW 100
DEK 6 GW BL/SW DEK 6 GW PE
DEK 6 GW RT/SW +
DEK 6 GW +
DEK 6 GW DEK 6 GW g
DEK 6 GW h
DEK 6 NEUTRAL
DEK 6 OR NEUTRAL
DEK 6 RT NEUTRAL
DEK 6 SW NEUTRAL
DEK 6 VI NEUTRAL
Order No.
0526960095
0526960096
0526960097
0526960098
0526960099
0526960100
1318091741
1318061187
1318091737
1318061198
1318061199
1318061202
1318061203
0468560000
0468591690
0468591686
0468591694
0468591689
DEK 6,5 BL NEUTRAL
DEK 6,5 FS 1-50
DEK 6,5 FS 101-150
DEK 6,5 FS 51-100
DEK 6,5 FSZ 1-10
DEK 6,5 FSZ 11-20
DEK 6,5 FSZ 21-30
DEK 6,5 FSZ 31-40
DEK 6,5 FSZ 41-50
DEK 6,5 FSZ 51-60
DEK 6,5 FSZ 61-70
DEK 6,5 FSZ 71-80
DEK 6,5 FSZ 81-90
DEK 6,5 FSZ 91-100
DEK 6,5 FW 1-50
DEK 6,5 FW 101-150
DEK 6,5 FW 151-200
DEK 6,5 FW 201-250
DEK 6,5 FW 251-300
DEK 6,5 FW 301-350
DEK 6,5 FW 351-400
DEK 6,5 FW 401-450
DEK 6,5 FW 451-500
DEK 6,5 FW 501-550
DEK 6,5 FW 51-100
DEK 6,5 FW L1- h
DEK 6,5 FW L1-PE
DEK 6,5 FWZ 1-10
DEK 6,5 FWZ 11-20
DEK 6,5 FWZ 21-30
DEK 6,5 FWZ 31-40
DEK 6,5 FWZ 41-50
DEK 6,5 FWZ 51-60
DEK 6,5 FWZ 61-70
DEK 6,5 FWZ 71-80
DEK 6,5 FWZ 81-90
DEK 6,5 FWZ 91-100
DEK 6,5 FWZ R,S,T,N,ERD
DEK 6,5 GE NEUTRAL
DEK 6,5 GN NEUTRAL
DEK 6,5 NEUTRAL
DEK 6,5 OR NEUTRAL
DEK 6,5 RT NEUTRAL
DEK 6,5 SW NEUTRAL
DEK 6,5 VI NEUTRAL
0468091693
0468260001
0468260101
0468260051
0407360001
0407360011
0407360021
0407360031
0407360041
0407360051
0407360061
0407360071
0407360081
0407360091
0468160001
0468160101
0468160151
0468160201
0468160251
0468160301
0468160351
0468160401
0468160451
0468160501
0468160051
0632161203
0632161187
0519060001
0519060011
0519060021
0519060031
0519060041
0519060051
0519060061
0519060071
0519060081
0519060091
0632060000
0468091687
0468091688
0468060000
0468091690
0468091686
0468091694
0468091689
DEK 8 BEDR./FARBIG
DEK 8 FS 1-50 TAMPOPR.
DEK 8 FS 51-100 TAMPOP.
DEK 8 FSZ 1-10
DEK 8 FSZ 11-20
DEK 8 FSZ 21-30
DEK 8 FSZ 31-40
1289690000
1653350001
1653350051
1289660001
1289660011
1289660021
1289660031
1282250000 – 2012/2013
Type/Print
DEK 8 FSZ 41-50
DEK 8 FSZ 51-60
DEK 8 FSZ 61-70
DEK 8 FSZ 71-80
DEK 8 FSZ 81-90
DEK 8 FSZ 91-100
DEK 8 FW 1-50 TAMPOPR.
DEK 8 FW 51-100 TAMPOP.
DEK 8 FWZ 1-10
DEK 8 FWZ 101-110
DEK 8 FWZ 11-20
DEK 8 FWZ 111-120
DEK 8 FWZ 121-130
DEK 8 FWZ 131-140
DEK 8 FWZ 141-150
DEK 8 FWZ 21-30
DEK 8 FWZ 31-40
DEK 8 FWZ 41-50
DEK 8 FWZ 51-60
DEK 8 FWZ 61-70
DEK 8 FWZ 71-80
DEK 8 FWZ 81-90
DEK 8 FWZ 91-100
DEK 8 GE NEUTRAL
DEK 8 GN NEUTRAL
DEK 8 NEUTRAL
DEK 8 OR NEUTRAL
DEK 8 RT NEUTRAL
DEK 8 SONDERDR. WEIß
DEK 8 VI NEUTRAL
Order No.
1289660041
1289660051
1289660061
1289660071
1289660081
1289660091
1653340001
1653340051
1276960001
1276960101
1276960011
1276960111
1276960121
1276960131
1276960141
1276960021
1276960031
1276960041
1276960051
1276960061
1276960071
1276960081
1276960091
1277091687
1277091688
1277060000
1277091690
1277091686
1326660000
1277091689
Accessories
Versions DEK
F
F.23
Terminal markers – Dekafix
Accessories
DEK MultiCard
The Dekafix marker in MultiCard format is the universal marker for all kinds of
connectors and also electronic modules from the Weidmüller product range. The
blank DEK marker is ideal for flexible, fast printing in situ with our innovative
labelling systems SMark-Laser, PrintJet, MCP Plus Plotter or MCMobilo.
The system is particularly suitable for short sequences of numbers and is also
available with special printing.
Halogen
•In strips for fast installation
•Flexible, fast printing on site during installation
•Excellent printing quality thanks to the Weidmüller MultiCard printers
•Available in 6 widths
•Custom printing with the MC Laser also possible
F
Technical data
Material
UL94 flammability rating
Temperature range
Printing
Polyamide 66, halogen-free
V2
–40 °C to 100 °C
black
Ordering data
Colourn
Special printing
Minimum order quantity
Notes on mounting
F.24
Available in all colours of the international colour code; for MC
on request
● brown
● red
● orange
● yellow
● green
● blue
● violet
● grey
white
Specify special printing and colours per diskette, Excel file or
using the M-Print® PRO software.
1 pack
Mount in strips when the marker pitch (width) corresponds to
the pitch of the terminals.
For example, DEK 5 mm pitch for terminals with 5 mm pitch
such as the WDU 2.5.
Mount individual markers when the terminal pitch is larger than
the marker pitch (width).
For example, DEK 6.5 mount individually on WDU 6 terminals.
Weidmüller markers with 5 mm pitch (width) are suitable for all widths of
terminals.
1282250000 – 2012/2013
Terminal markers – Dekafix
Clamping width: 3.5 mm
Accessories
Dekafix is the universal marker for the SAK series, W
series, Z series, P series, and I series as well as for
plug-type connectors and electronic sub-assemblies.
Ordering data
Type
DEK 5/3.5 MC
Material colour
white
Length
5 mm
Qty.
500
Order No.
1755270000
Type
DEK 5/3.5 MC
Material colour
white
Length
5 mm
Qty.
100
Order No.
1767730000
DEK - blank
Type
DEK 5/5 Plus MC
DEK 5/5 Plus MC GE
DEK 5/5 MC
DEK 5/5 MC GE
DEK 5/5 MC BL
DEK 5/5 MC GR
DEK 5/5 MC GN
DEK 5/5 MC RT
Material colour
white
yellow
white
yellow
blue
grey
green
red
Length
5 mm
5 mm
5 mm
5 mm
5 mm
5 mm
5 mm
5 mm
Qty.
1000
1000
1000
1000
1000
1000
1000
1000
Order No.
1854490000
1907520000
1609801044
1609801687
1609801693
1609801691
1609801688
1609801686
DEK - Custom printing
Type
DEK 5/5 MC
DEK 5/5 Plus MC
Material colour
white
white
Length
5 mm
5 mm
Qty.
200
200
Order No.
1609810000
1854500000
Type
DEK 5/6 MC
DEK 5/6 MC PLUS
DEK 5/6.5 MC
DEK 5/6.5 PLUS MC
NEW
Material colour
white
white
white
white
Length
5 mm
5 mm
5 mm
5 mm
Qty.
1000
1000
900
900
Order No.
1609820000
1011320000
1609840000
1046340000
NEW
Material colour
white
white
white
white
Length
5 mm
5 mm
5 mm
5 mm
Qty.
200
200
180
180
Order No.
1609830000
1038650000
1609850000
1046360000
NEW
Material colour
white
white
white
Length
5 mm
5 mm
5 mm
Qty.
320
800
800
Order No.
1720620000
1856740000
1046350000
NEW
Material colour
white
white
white
Length
5 mm
5 mm
5 mm
Qty.
64
160
160
Order No.
1770490000
1856750000
1046370000
DEK - blank
DEK - Custom printing
Clamping width: 5.0 mm
Clamping width: 6.0 / 6.5 mm
DEK - blank
DEK - Custom printing
Clamping width: 7.5 / 8.0 mm
DEK - blank
DEK - Custom printing
1282250000 – 2012/2013
Type
DEK 5/6 MC SDR
DEK 5/6 MC SDR PLUS
DEK 5/6.5 MC
DEK 5/6.5 PLUS MC
Type
DEK 5/7.5 MC
DEK 5/8 MC
DEK 5/8 PLUS MC
Type
DEK 5/7.5 MC
DEK 5/8 MC
DEK 5/8 PLUS MC
F
F.25
Terminal markers – WS Introduction
Accessories
WS
WS markers are designed specifically for W series terminals. But thanks to their
system compatibility, WS markers can also be used with the I series, Z series and
P series. The generous size of these markers permit long characters strings and
multiple-line printing.
WS markers are ideal for labelling where long, individual character strings are
required. And the proven MultiCard format makes labelling possible with the
SMark-Laser, PrintJet, MCP Plus Plotter or MC-Mobilo as well.
Halogen
•Mount in strips or individually
•Markers in the proven MultiCard format
•Excellent printing quality thanks to the Weidmüller MultiCard printers
F
Technical data
Material
UL94 flammability rating
Temperature range
Printing
Polyamide 66, halogen-free
V2
–40 °C to 100 °C
black
Ordering data
Colourn
Special printing
Minimum order quantity
Notes on mounting
F.26
Available in all colours of the international colour code; for MC
on request
● brown
● red
● orange
● yellow
● green
● blue
● violet
● grey
white
Specify special printing and colours per diskette, Excel file or
using the M-Print® PRO software.
1 pack
Mount in strips when the marker pitch (width) corresponds to
the pitch of the terminals. For example, WS 10/6 = 6 mm pitch
for terminals with 6 mm pitch such as the WDU 4.
Mount individual markers when the terminal pitch is larger than the marker
pitch (width). For example, WS 12/6.5 mount individually on WDU 6
terminals. Weidmüller markers with 5 mm pitch (width) are suitable for all
widths of terminals.
1282250000 – 2012/2013
Terminal markers – ZS Introduction
Accessories
ZS
ZS markers – in the proven MultiCard format – were specially developed for
Z series terminals. They provide users with a large labelling area. Their unique
hinged form means that cross-connectors, for example, are still readily accessible
without having to remove the marker. Markers can be clipped on in strips to
guarantee fast installation, but individual markers are easily separated.
Halogen
•Hinged labelling area
•Mount in strips or individually
•Markers in the proven MultiCard format
•Flexible, fast printing on site during installation
F
Technical data
Material
UL94 flammability rating
Temperature range
Printing
Polyamide 66, halogen-free
V2
–40 °C to 100 °C
black
Ordering data
Colour
Notes on mounting
Special printing
Suitable printing systems
Minimum order quantity
1282250000 – 2012/2013
white
height x width (pitch), e.g. ZS 10/5:
10 mm high, 5 mm wide = 5 mm pitch
Specify special printing per diskette, Excel file or using the
M-Print® PRO software.
SMark-Laser, PrintJet, Plotter MCP Plus or MC-Mobilo
1 pack
F.27
Terminal markers – WS / ZS
Accessories
WS markers are perfect for the connectors of the W-series,
I-series, P-series and Z-series. WS 10/5 and 10/6 Middle
are fitted with a centre foot and can be used for the
I-series. The ZS markers are specially conceived for the
Z-series.
Clamping width: 3.5 mm
Type
WS 12/3.5 MC
Material colour
white
Length
12 mm
Qty.
600
Order No.
1778270000
WS - Custom printing
Type
WS 12/3.5 MC
Material colour
white
Length
12 mm
Qty.
120
Order No.
1778280000
Type
WS 8/5 MC
WS 8/5 MC GE
WS 8/5 MC RT
WS 8/5 MC BL
WS 8/5 MC OR
WS 8/5 PLUS MC
WS 10/5 MC
WS 10/5 MC GE
WS 10/5 MC Middle
WS 10/5 MC RT
WS 10/5 MC BL
WS 10/5 PLUS MC
WS 12/5 MC
WS 12/5 MC GE
WS 12/5 MC RT
WS 12/5 MC BL
WS 12/5 MC OR
WS 12/5 MC PLUS
WS 14/5 MC
WS 15/5 MC
WS 15/5 MC GE
Material colour
white
yellow
red
blue
orange
white
white
yellow
white
red
blue
white
white
yellow
red
blue
orange
white
white
white
yellow
Length
8 mm
8 mm
8 mm
8 mm
8 mm
8 mm
10 mm
10 mm
10 mm
10 mm
10 mm
10 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
14 mm
15 mm
15 mm
Qty.
720
720
720
720
720
600
720
720
720
720
720
600
720
720
720
720
720
600
480
480
480
Order No.
1640740000
1773521687
1773521686
1773521693
1773521690
1951870000
1635000000
1773531687
1792000000
1773531686
1773531693
1046380000
1609860000
1773541687
1773541686
1773541693
1773541690
1927510000
1768090000
1609880000
1773571687
Material colour
white
white
white
white
white
white
white
white
Length
8 mm
8 mm
10 mm
10 mm
10 mm
12 mm
12 mm
15 mm
Qty.
144
120
144
144
120
144
120
96
Order No.
1640750000
1038790000
1635010000
1792010000
1046320000
1609870000
1927520000
1609890000
Material colour
white
white
white
green
yellow
red
orange
white
white
yellow
red
blue
orange
brown
violet
white
Length
8 mm
10 mm
10 mm
10 mm
10 mm
10 mm
10 mm
10 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
12 mm
Qty.
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
Order No.
1951880000
1828450000
1818400000
1917420000
1917430000
1917440000
1917410000
1046390000
1609900000
1773551687
1773551686
1773551693
1773551690
1773551692
1773551689
1927530000
Clamping width: 5.0 mm
WS - blank
F
WS - Custom printing
Clamping width: 6.0 mm
WS - blank
F.28
Ordering data
WS - blank
Type
WS 8/5 MC
WS 8/5 MC PLUS
WS 10/5 MC
WS 10/5 MC Middle
WS 10/5 PLUS MC
WS 12/5 MC
WS 12/5 MC PLUS
WS 15/5 MC
Type
WS 8/6 PLUS MC
WS 10/6 MC
WS 10/6 MC Middle
WS 10/6 MC Middle GN
WS 10/6 MC Middle GE
WS 10/6 MC Middle RT
WS 10/6 MC Middle OR
WS 10/6 PLUS MC
WS 12/6 MC
WS 12/6 MC GE
WS 12/6 MC RT
WS 12/6 MC BL
WS 12/6 MC OR
WS 12/6 MC BR
WS 12/6 MC VI
WS 12/6 MC PLUS
NEW
NEW
NEW
1282250000 – 2012/2013
Terminal markers – WS / ZS
WS - Custom printing
Clamping width: 6.5 mm
Accessories
WS markers are perfect for the connectors of the W-series,
I-series, P-series and Z-series. WS 10/5 and 10/6 Middle
are fitted with a centre foot and can be used for the
I-series. The ZS markers are specially conceived for the
Z-series.
Ordering data
Type
WS 8/6 PLUS MC
WS 10/6 MC
WS 10/6 MC Middle
WS 10/6 PLUS MC
WS 12/6 MC
WS 12/6 MC PLUS
NEW
Material colour
white
white
white
white
white
white
Length
8 mm
10 mm
10 mm
10 mm
12 mm
12 mm
Qty.
120
120
120
120
120
120
Order No.
1038820000
1828460000
1818410000
1046330000
1609910000
1927540000
WS - blank
Type
WS 12/6.5 MC
WS 12/6.5 MC GE
WS 12/6.5 MC RT
WS 12/6.5 MC BL
WS 12/6.5 MC GN
Material colour
white
yellow
red
blue
green
Length
12 mm
12 mm
12 mm
12 mm
12 mm
Qty.
540
540
540
540
540
Order No.
1609920000
1773561687
1773561686
1773561693
1773561688
WS - Custom printing
Type
WS 12/6.5 MC
Material colour
white
Length
12 mm
Qty.
108
Order No.
1609930000
WS - blank
Type
WS 10/8 MC
WS 12/8 MC
Material colour
white
white
Length
10 mm
12 mm
Qty.
420
420
Order No.
1905950000
1906000000
WS - Custom printing
Type
WS 10/8 MC
WS 12/8 MC
Material colour
white
white
Length
10 mm
12 mm
Qty.
84
84
Order No.
1906030000
1906010000
WS - blank
Type
WS 10/12 MC
WS 10/15 MC
Material colour
white
white
Length
10 mm
10 mm
Qty.
300
240
Order No.
1905970000
1854090000
WS - Custom printing
Type
WS 10/12 MC
WS 10/15 MC
Material colour
white
white
Length
10 mm
10 mm
Qty.
60
48
Order No.
1906060000
1854100000
ZS - blank
Type
ZS 10/5 MC
ZS 15/5 MC
Material colour
white
white
Length
10 mm
15 mm
Qty.
480
480
Order No.
1610000000
1646630000
ZS - Custom printing
Type
ZS 10/5 MC
ZS 15/5 MC
Material colour
white
white
Length
10 mm
15 mm
Qty.
96
96
Order No.
1610010000
1646640000
ZS - blank
Type
ZS 12/6 MC
Material colour
white
Length
12 mm
Qty.
400
Order No.
1610020000
ZS - Custom printing
Type
ZS 12/6 MC
Material colour
white
Length
12 mm
Qty.
80
Order No.
1610030000
Clamping width: 8.0 mm
Clamping width: 12.0 / 15.0 mm
Clamping width: 5.0 mm
Clamping width: 6.0 mm
1282250000 – 2012/2013
F
F.29
Terminal markers – Tag carrier
Accessories
This tag holder is specially conceived for the IDK 1.5N two-tier terminal of the I-series. The flexible hinge mechanism
allows cross-connections to be connected or disconnected at little effort. It can be fitted with four DEK 5 tags or two WS
10/5 Middle connector markers.
Snap Mark
Technical data
Material
UL94 flammability rating
Min. temperature, continuous
Max. temperature, continuous
Material colour
Ordering data
Type
Snap Mark I
Length
23 mm
Width
5 mm
Qty.
50
Order No.
1805880000
Type
DEK 5/5 MC
WS 10/5 MC Middle
Length
5 mm
10 mm
Width
5 mm
5 mm
Qty.
1000
720
Order No.
1609801044
1792000000
Polyamide 66
V2
-40 °C
100 °C
white
Accessories
F
The BZT tag carrier makes possible the clear labelling of the ZDU 2.5/4/6 and ZDUA terminal families.
The BZT is used with the WS 10/5 terminal markers. By creating blocks of tag carriers, the ZA version offers the
maximum stability.
BZT1 / BZT2
Technical data
Material
UL94 flammability rating
Min. temperature, continuous
Max. temperature, continuous
Material colour
Accessories
F.30
Ordering data
Polyamide
V2
-40 °C
100 °C
beige
Type
BZT 1
BZT 1 ZA
BZT 2
BZT 2 ZA
Length
8 mm
8 mm
12 mm
12 mm
Width
5 mm
5 mm
5 mm
5 mm
Qty.
100
100
100
100
Order No.
1805490000
1805520000
1805480000
1805530000
Type
WS 10/5 MC
Length
10 mm
Width
5 mm
Qty.
20
Order No.
1635000000
1282250000 – 2012/2013
Terminal markers – Tag carrier
SchT 5 / SchT 5 S
Technical data
Material
UL94 flammability rating
Min. temperature, continuous
Max. temperature, continuous
Material colour
Ordering data
Polyamide 66
V2
-40 °C
100 °C
beige
Accessories
Accessories
The SCHT 5 & SCHT 5 S group marker carrier is clipped directly to the TS 32 DIN rail (G-rail) or the TS 35 DIN rail (top-hat
rail). It is therefore possible to provide terminal strip labelling irrespective of the terminal and the type of terminal.
Type
SCHT 5
SCHT 5 S
Length
44.5 mm
44.5 mm
Width
19.5 mm
9.5 mm
Type
ESO 5 white
ESO 5 yellow
ESO 5P white
ESO 5P yellow
ESO 5 S white
STR 5 F.SCHT 5
STR 5 S. F.SCHT 5 S
ELS 7/40 MC NE GE
ELS 7/40 MC NE WS
ELS 16/40 MC NE GE
ELS 16/40 MC NE WS
Length
40 mm
40 mm
40 mm
40 mm
40 mm
40 mm
40 mm
Width
16.5 mm
16.5 mm
16.5 mm
16.5 mm
7 mm
16.5 mm
7 mm
No. per sheet
60
60
60
60
140
20
20
Qty.
20
20
Order No.
0292460000
1631930000
Qty.
10
10
10
10
10
20
20
40
40
40
40
Order No.
1607710000
1631350000
1670370000
1670380000
1631920000
0294000000
1631940000
1045650000
1045640000
1045630000
1045620000
F
The SCHT 7 is a hinged group marker carrier for inlay tags which still allows easy access to the clamping screw.
To equip with ESO 7, 4 tags of DEK 5/5 or 2 tags of WS 10/5 Middle.
SCHT 7
Technical data
Material
UL94 flammability rating
Min. temperature, continuous
Max. temperature, continuous
Material colour
Accessories
1282250000 – 2012/2013
Ordering data
Type
SCHT 7
Length
39.3 mm
Width
8 mm
Type
DEK 5/5 MC
ESO 7 white
ESO 7 yellow
ESO 7P white
ESO 7P yellow
STR 7 SCHT 7
WS 10/5 MC Middle
Length
5 mm
27 mm
27 mm
27 mm
27 mm
27 mm
10 mm
Width
5 mm
6.3 mm
6.3 mm
6.3 mm
6.3 mm
6.3 mm
5 mm
Qty.
20
Order No.
0517960000
Qty.
1000
10
10
10
10
20
720
Order No.
1609801044
1607720000
1634780000
1670390000
1670400000
0515300000
1792000000
Polyamid 66
V2
-40 °C
100 °C
white
No. per sheet
240
240
240
240
20
F.31
Terminal markers – Tag carrier
Accessories
SchT 9/4 and SchT 14/6 are hinged group tag holders for single dekafix and WS tags, allowing easy access to the
clamping screws.
SCHT 9/4 / SCHT 14/6
Technical data
Material
UL94 flammability rating
Min. temperature, continuous
Max. temperature, continuous
Material colour
Ordering data
Polyamide 66
V2
-40 °C
100 °C
beige
Accessories
Type
SCHT 14/6
SCHT 9/4
Length
44.3 mm
32 mm
Width
6 mm
4 mm
Qty.
20
20
Order No.
1269060000
1278460000
Type
DEK 5/5 MC
WS 12/5 MC
Length
5 mm
12 mm
Width
5 mm
5 mm
Qty.
1000
720
Order No.
1609801044
1609860000
F
The ELS-type MultiCard marker can be printed on with PrintJet, plotter or SMark printer. Colour printing with the PrintJet
PRO, in particular, enables cables and terminal strips to be labelled in a variety of noticeable manners.
Halogen
ELS insertion tag
Technical data
Material
UL94 flammability rating
Min. temperature, continuous
Max. temperature, continuous
Suitable for
F.32
Ordering data
Polyamide PA 66
V2
-40 °C
100 °C
ELS 6/30:
WKM 8/30 (1631910000) and
EM 8/30 (1806120000)
ELS 7/40 :
SchT5S (1631930000)
ELS 16/40:
SchT5 (0292460000) and
WKM 18/43 (1610700000)
Type
blank
ELS 6/30 MC NE WS
ELS 6/30 MC NE GE
ELS 7/40 MC NE WS
ELS 7/40 MC NE GE
ELS 16/40 MC NE WS
ELS 16/40 MC NE GE
Custom printing
ELS 6/30 MC SDR
ELS 7/40 MC SDR
ELS 16/40 MC SDR
NEW
Colour
Qty.
Order No.
white
yellow
white
yellow
white
yellow
80
80
40
40
40
40
1045570000
1045580000
1045640000
1045650000
1045620000
1045630000
16
8
8
1045660000
1045700000
1045690000
1282250000 – 2012/2013
Terminal markers – Tag carrier
EM 8/30
Technical data
Material
UL94 flammability rating
Min. temperature, continuous
Max. temperature, continuous
Material colour
Ordering data
Length
30 mm
Width
8 mm
Type
ESO 7 white
ESO 7 yellow
ESO 7P white
ESO 7P yellow
Length
27 mm
27 mm
27 mm
27 mm
Width
6.3 mm
6.3 mm
6.3 mm
6.3 mm
Qty.
50
Order No.
1806120000
Qty.
10
10
10
10
Order No.
1607720000
1634780000
1670390000
1670400000
Polypropylene
HB
-40 °C
80 °C
transparent
Accessories
Technical data
ESO...P
ESO
Type
EM 8/30
Accessories
The EM 8/30 end bracket marker is suitable for labelling the WEW 35/2 and ZEW 35/2 end brackets as well as marker
carrier for W-series terminals. The EM 8/30 can be fitted with the ESO 7 and ESO 7P inlay tags. The pocket guarantees
that the labelling is well protected against environmental influences.
Halogen
= Polyester
= Paper
No. per sheet
240
240
240
240
F
WGB group marker carrier for single dekafix and WS tags. The WGB also covers the cross-connection channels.
Blank WAD covers for labelling with PrintJet, or a special printing for the W-series. Cross-connection channels are covered.
Also available with lightning flash warning symbol to DIN 30600.
WGB 5 / WGB 8 / WAD
Technical data
Material
UL94 flammability rating
Min. temperature, continuous
Max. temperature, continuous
Ordering data
Polyamide 66
V2
-40 °C
100 °C
WAD – Custom printing
Accessories WGB 5 / WGB 8
1282250000 – 2012/2013
Type
WGB 5
WGB 8
WAD 5 MC NE WS
WAD 5 MC NE GE
WAD 5 MC B GE/SW flash
WAD 8 MC NE WS
WAD 8 MC NE GE
WAD 8 MC B GE/SW flash
WAD 12
WAD 12 flash
WAD 27
WAD 27 flash
Length
33.5 mm
33.5 mm
33.5 mm
33.5 mm
33.5 mm
33.5 mm
33.5 mm
33.5 mm
36.2 mm
36.2 mm
64 mm
64 mm
Width
5 mm
7.7 mm
5 mm
5 mm
5 mm
8 mm
8 mm
8 mm
12 mm
12 mm
27 mm
27 mm
Material colour
beige
beige
white
yellow
yellow
white
yellow
yellow
white
yellow
white
yellow
Qty.
50
50
48
48
48
48
48
48
50
50
10
10
Order No.
1050760000
1050960000
1112910000
1112920000
1120450000
1112940000
1112950000
1120470000
1056260000
1055960000
1062960000
1062860000
Type
WAD 5
WAD 8
Length
33.5 mm
33.5 mm
Width
5 mm
8 mm
Material colour
white/yellow
white/yellow
Qty.
12
12
Order No.
1112930000
1112970000
Type
DEK 5/5 MC
DEK 5/30 MC
DEK 5/30 MC SDR
WS 12/5 MC
Length
5 mm
30 mm
30 mm
12 mm
Width
5 mm
5 mm
5 mm
5 mm
Qty.
1000
100
40
720
Order No.
1609801044
1951920000
1025680000
1609860000
F.33
Terminal markers – Tag carrier
Accessories
The ZGB 15 / ZGB 30 is a hinged marker carrier. The tag holder can be fitted with the dekafix 5, WS 12/5 connector
markers or with the push-in tag ESO 15 / ESO 7.
ZGB 15 / ZGB 30
Technical data
Material
UL94 flammability rating
Min. temperature, continuous
Max. temperature, continuous
Material colour
Accessories
F
F.34
Ordering data
Polyamide 66
V2
-40 °C
100 °C
white
Type
ZGB 15
ZGB 30
Length
15 mm
32 mm
Width
7 mm
7 mm
Type
DEK 5/5 MC
DEK 5/30
DEK 5/30 SDR
ESO 7 white
ESO 7 yellow
ESO 7P white
ESO 7P yellow
ESO 15 white
STR 7 SCHT 7
STR 15 ZGB 15
WS 12/5 MC
Length
5 mm
30 mm
30 mm
27 mm
27 mm
27 mm
27 mm
15 mm
27 mm
15 mm
12 mm
Width
5 mm
5 mm
5 mm
6.3 mm
6.3 mm
6.3 mm
6.3 mm
6 mm
6.3 mm
6.3 mm
5 mm
No. per sheet
240
240
240
240
120
20
20
Qty.
20
20
Order No.
1636530000
1611930000
Qty.
1000
100
40
10
10
10
10
1
20
20
720
Order No.
1609801044
1951920000
1025680000
1607720000
1634780000
1670390000
1670400000
1636510000
0515300000
1636520000
1609860000
1282250000 – 2012/2013
Printing systems and software
Accessories
Printing systems and software
The Weidmüller labelling systems are the quick and efficient
way of producing markers for connectors, wires, cables
and devices, plus labels for general use. The M-Print® PRO
software enables users to mark electrical equipment quickly
and simply. For professional and fast design, printing and
ordering of your marking requirements. Borders, barcodes,
graphics or photos can all be easily integrated. The
multitude of data conversion routines presents you with fast
and flexible options for data integration. The Weidmüller
PrintJet PRO, MCP Plus, MCP Basic, MC-Mobilo
printers plus those of the ThermoMark series can be used
for printing.
The PrintJet PRO is the recommended model in industrial
marking for high-resolution printing and maximum wipe
and scratch resistance. The MCP Plus plotter provides you
with good flexibility because with its positioning frame
it can handle more than 160 different types of marker in
the MultiCard format. The MC-Mobilo is the ideal printer
for labelling on site without a PC and a mains power
supply, directly during installation work. The printers of
the ThermoMark series are ideal for printing labels and/or
shrinkable sleeves in excellent quality.
F
Printer
Type of marker
PrintJet PRO
Plotter MCP Plus
MCP Basic
MC Mobilo
THM TwinMark
THM Plus
THM Basic
Technical data
Technology
Voltage
Printing resolution
Interfaces
Inkjet process
AC 230 V / AC 115 V
1.200 dpi
USB, LAN
Plotting technique
AC 230 / AC 115 V
Plotting technique
AC 230 / AC 115 V
Plotting technique
AC 230 / AC 115 V
Parallel Centronics, USB
USB
RS 232
Thermal transfer
AC 230 / AC 115 V
300 dpi
RS 232, USB, LAN
Thermal transfer
AC 230 / AC 115 V
300 dpi
RS 232, USB, LAN,
Compact Flash
Thermal transfer
AC 230 / AC 115 V
203 dpi
Parallel Centronics, USB,
RS 232, LAN
l
l
l
Network interface card
l
Terminal markers
DEK/WS/ZS/MF
ELS
WAD
l
l
l
l
l
l
l
l
l
Cable and wire markers
SF/SFX/SFC
TM-I
ELS
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Device markers
DMC
ESG
SM/CC
Labels
THM MT
THM WriteOn
THM GEW
THM EL
THM ET S7
Shrink sleeves
TwinMark
1282250000 – 2012/2013
l
l
l
l
l
l
l
l
l
l
l
F.35
Printing systems – Inkjet printer
Accessories
PrintJet PRO
The PrintJet PRO inkjet printer prints markers for
electric connectivity. These markers can be used for
clear equipment identification on devices, cables and
connectors. The labelling makes ­servicing, maintenance
and troubleshooting much easier. Water-based ink is used
for the black or spot colour printing. The print is crystal
clear and resistant to environmental influences.
The PrintJet PRO prints plastic markers in ­MultiCard
format. In combination with the user-friendly
­­
M-Print® PRO software and the attached loader, the
printer is an essential part of the production. The inkjet
process being used, the subsequent fusing, as well as the
printer cartridge and ink have all been specially adapted
by Weidmüller for industrial use. The printer has excellent
long-term use capabilities, thanks to its integrated loader.
•Top-quality, resistant printing
•Spot colour print
•Perfect for constant use
•Integrated loader for 20 MultiCards
•Ideal for large quantities
•The display shows all relevant information
•Flexible connection options, from LAN ports to USB ports
F
Technical data
PrintJet PRO
Type
Application
Technology
Print quality
Printer drivers
Print software
System requirements
Feed
Fusing
Interface
Power supply
Location
Ambient temperature
Dimensions (L x W x H)
Weight
Cartridge system
Scope of supply
PrintJet PRO
Prints MultiCard marker
Inkjet process
600 / 1.200 dpi
Windows® 2000/XP/VISTA/7
M-Print® PRO
Windows® 2000/XP/VISTA/7
Integrated loader
Thermal fusing
USB, LAN
AC 230 V/AC 115 V
Office conditions
20 °C to 35 °C
1060 x 500 x 310 mm
33 kg
Ink cartridge, CMYK (up to 1,000,000 characters,
Arial font size 6)
PrintJet PRO, power cable, printer drivers, manuals (CD),
Ink tank starter set colour, USB cable, M-Print® PRO software
Ordering data
Type
PrintJet PRO 115V
PrintJet PRO 230V
Accessories
PJ PRO TNTK INK SET COL
PJ PRO TNTK INK K
PJ PRO TNTK INK C
PJ PRO TNTK INK M
PJ PRO TNTK INK Y
PJ PRO TNAW
Ink tank PrintJet II
Clean Unit PrintJet II
Ink tank PrintJet
Clean Unit PrintJet
F.36
PrintJet PRO
Order No.
1024050000
1001180001
Ink tank starter set, colour
l Ink tank Black
l Ink tank Cyan
l Ink tank Magenta
l Ink tank Yellow
waste pad
1027110000
1027040000
1027050000
1027060000
1027070000
1024140000
1858920000
1858950000
1797460000
4062150000
1282250000 – 2012/2013
Printing systems – Plotter
MCP Plus
Accessories
The plotter MCP Plus complements the Weimüller
MultiCard concept. It is suitable for smaller quantities of
markers and when only part of a MultiCard is to be printed
on. The special p­ ositioning frame for five MultiCards
increases productivity by 20 % over comparable systems.
With the positioning frame for SlimFix markers sizes 4 to
6, printing on more than 160 MultiCard types for terminals,
cables, wires and equipment is possible. Labels are printed
with the MCP-Label positioning frame. Suitable for use
with the Weidmüller ­M-Print® PRO software.
•2 positioning frames for more than 160 MultiCard types
•MultiCards easily fitted into the frame
•Easy to use with partly used MultiCards
•Automatic pen activation function
•Safe storage of the plotter pens
Technical data
Type
Application
Technology
Print software
System requirements
Interface
Power supply
Feed
Location
Ambient temperature
Dimensions (L x W x H)
Weight
Scope of supply
Ordering data
Type
MCP Plus plotter set
1282250000 – 2012/2013
MCP Plus
printing of MultiCard markers and labels
plotting technique
M-Print® PRO
Windows 2000/XP/VISTA/7
Parallel Centronics / USB
230/115 V AC
manual
office conditions
10 °C – 35 °C
660 x 440 x 125 mm
approx. 8 kg
MCP Plus with Centronics cable, USB cable, power pack (100-240 V
AC/50-60 Hz), Euro and US plugs, MultiCard positioning frame, 0.25 P-Ink
plotter pen, printer driver, M-Print® PRO software and manual
F
MCP Plus
Order No.
1925000000
F.37
Printing systems – Plotter MCP Plus
Accessories
MCP Basic
The MCP Basic plotter is a flexible and portable solution
that allows you to print your labels on-site quickly and
easily.
The MCP Basic is suited for printing small-scale labelling
jobs, partial labels, or remaining quantities
•Small space-saving flat-bed plotter
•Positioning frame for 3 MultiCards
•Easily filled with MultiCard sheets
•Positioning frame for SlimFix, sizes 4 to 6 and a label
positioning frame optionally available
•Works together with Weidmüller’s M-Print® PRO
software
Technical data
Type
Application
Technology
Plotting speed
System requirements
Software
Interfaces
Voltage supply
Voltage supply
Feed
Location
Ambient temperature
Dimensions (L x W x H) mm
Weight
Scope of supply
F
Ordering data
Type
MCP Basic
F.38
MCP Basic
Printing MultiCard markers and labels
plotting technique
max. 40 mm/s
Windows® 2000/XP/VISTA/7
M-Print® PRO
USB
100∼240 V AC, 50-60 Hz
Via external power supply unit with interchangeable adapters
manual
office conditions
10 °C – 35 °C
440 x 440 x 125
6 kg
MCP Basic plotter, printer driver, power cord, USB cable,
M-Print® PRO software, 0.25 P-Ink plotter pen, MultiCard positioning frame,
power supply unit (100-240 V AC / 50-60 Hz), Euro and
US plugs, user manual on CD, hand trolley-case
MCP Basic
Order No.
1139400000
1282250000 – 2012/2013
Printing systems – Plotter MCP Plus
Accessories
MCP
MCP positioning frames
MCP plotter pens
MCP ink
MCP miscellaneous
Ordering data
Type
MCP AP PLUS
MCP AP BASIC
MCP AP SF 4-6
MCP AP Labels
for
MultiCards
MultiCards
SlimFix sizes 4 to 6
Labels
Qty.
1
1
1
1
Order No.
1924360000
1139880000
1924310000
1924370000
Type
Plotter Pen 0.18
Plotter Pen 0.25
Plotter Pen 0.25 P-Ink
Plotter Pen 0.35
Plotter Pen 0.35 P-Ink
Plotter Pen 0.50
Plotter Pen 0.50 P-Ink
Plotter Pen 0.70
Plotter Pen 0.70 P-Ink
for
Reusable pen
Reusable pen
Disposable pen 8 ml
Reusable pen
Disposable pen 8 ml
Reusable pen
Disposable pen 8 ml
Reusable pen
Disposable pen 8 ml
Qty.
1
1
1
1
1
1
1
1
1
Order No.
1768570000
1768540000
1920640000
1768550000
1920650000
1768560000
1005710000
1011440000
1011450000
Type
P- Ink
Ink 2000
Contents
30 ml
25 ml
Qty.
1
1
Order No.
1924340000
1772120000
Type
P cleaner
Cleaner Clean 2000
Inlay for MCP
Inlay SFC 3
MCP adhesive strips
MCP Plus cover
MCP TP-KOF Basic
Contents
30 ml
25 ml
Qty.
1
1
1
1
5
1
1
Order No.
1924330000
1772130000
1935130000
1058090000
1924320000
1924350000
1139890000
Not for CLI T sleeves
Not for CLI T sleeves
Not for CLI T sleeves
Not for CLI T sleeves
Not for CLI T sleeves
Trolley MCP Basic
F
The STI-S felt tip pen is suitable for labelling blank Weidmüller marking products. It can be used for handwritten labels or,
in conjunction with the STI-S adapter, for a plotter printout. A black, waterproof ink is used.
Accessories – STI pen
1282250000 – 2012/2013
Ordering data
Type
Adapter aluminium STI pen
STI pen SW
Not for CLI T sleeves
Qty.
1
10
Order No.
1762440000
0508401694
F.39
Printing systems – Plotter
Accessories
MC-Mobilo
The MC-Mobilo allows users to label electrical equipment,
anywhere, at any time as there is no need for a PC and no
need for a power supply. The rechargeable battery provides
power for up to 3 hours. The universal inlay enables up to
120 different marker types of the MultiCard range to be
processed.
Technical data
Type
Application
Technology
Print software
Interface
Power supply
Feed
Location
Ambient temperature
Dimensions (L x W x H)
Weight
Scope of supply
F
Plotter
Printing of MultiCard markers
Plotting technique
WM-Print
RS 232
AC 230 / AC 115 V
manual
can be used anywhere
15 – 30 °C
380 x 190 x 68 mm
3 kg
MC-Mobilo, universal power unit, including adapters (EURO, UK, USA), data
cassette, operating instructions, PowerPack, PC connecting cable, WM-Print,
universal MultiCard mounting frame, 0.25 plotter pen, carry case
Ordering data
MC-Mobilo
MC-Mobilo 110/220 V
MC-Mobilo Accessories
Printkit (Ink 2000, Clean 2000, Plotter-Pen 0.25)
Frame inlay SF 4-6
Inlay SFC 3
Accessories Plotter IP220/MC-Mobilo
P-Ink 30 ml
Ink 2000 25 ml
P cleaner 30 ml
Cleaner Clean 2000 25 ml
Plotter Pen 0.18
Plotter Pen 0.25
Plotter Pen 0.25 P-Ink
Plotter Pen 0.35
Plotter Pen 0.35 P-Ink
Plotter Pen 0.50
Plotter Pen 0.50 P-Ink
Plotter Pen 0.70
Plotter Pen 0.70 P-Ink
Accessories – STI pen
Adapter aluminium STI pen
STI pen SW
F.40
MC-Mobilo
Qty.
1
Order No.
1741260001
1
1
1
1686920000
1802180000
1058090000
Not suitable for CLI-T sleeves
1
1
1
1
1
1
1
1
1
1
1
1
1
1924340000
1772120000
1924330000
1772130000
1768570000
1768540000
1920640000
1768550000
1920650000
1768560000
1005710000
1011440000
1011450000
Not suitable for CLI-T sleeves
1
10
1762440000
0508401694
Not suitable for CLI-T sleeves
Not suitable for CLI-T sleeves
Not suitable for CLI-T sleeves
Not suitable for CLI-T sleeves
1282250000 – 2012/2013
Printing systems – Software
M-Print® PRO Label Designer
Accessories
Print and ordering software for markers and labels
M-Print® PRO is a professional software for
printing and ordering Weidmüller markers and labels under
Windows®. This software helps you
to optimise your processes for marking electrical
equipment. You can design, print and order your marking
materials effortlessly, professionally and quickly: texts,
frames, lines, graphics, barcodes, serial numbers and
photos.
F
Technical data
Here is an overview of the main functions
Integrated product catalogue for all labels and markers, including images and links to the relevant web pages and product data sheets
Custom formatting of individual text characters (RTF)
Perform copy-and-paste functions with texts and their formats
Supports UNICODE for foreign-language texts, such as Russian, Chinese, Polish, etc.
Enter data on labels or worksheet, or directly in Microsoft® Excel
Numeric and alphanumeric counts and sequences
Extensive range of image formats (*.bmp, *.wmf, *.png, *.ico, *.jpeg, *.tif, *.gif)
Image library including all the important symbols used in electrical engineering
Permanent print preview: see how the printout will look during the design phase
Supported output devices: PrintJet Pro, PrintJet II, SMark laser, MCP plotter, THM
and standard printers with Windows® drivers
Assign product to specific printer; for example, ESG 9/20 to PrintJet, LaserMark to laser printer, etc.
Optimum and rapid adjustment of the output devices
Imports data from CAE systems
Import assistant to create your own import filter for numerous file formats (*.txt, *.csv, *.xml etc.)
Markers and labels can be designed in as many levels as required
Interface to RailDesigner®
Operating systems supported
WINDOWS® 2000/XP/VISTA/7
System requirements
RAM
Processor
Graphics
Hard drive
Miscellaneous
> 256 MB
> Pentium PIII or comparable model
> 800 x 600 pixels with 256 colours
optimum: 1024 x 768 with 16-bit High Colour
> 90 MB free storage
mouse, keyboard, CD-ROM drive (to install the software)
M-Print® PRO is available in two editions:
•M-Print® PRO Standard Edition for professional printing results with all of Weidmüller’s marking materials
•M-Print® PRO Advanced Edition for professional printing results with all of Weidmüller’s marking materials plus labels to
your own specification
Ordering data
Type
M-Print® PRO
M-Print® PRO advanced
1282250000 – 2012/2013
M-Print® PRO
Order No.
1905490000
1905500000
F.41
Tools
KT 8
Accessories
Cutting tools
KT 12
KT 22
​•Cutting formation for different cable sizes increases the
quality of the cuts for smaller cross-sections
•Not suitable for steel wires, steel-armoured cables,
aluminium alloys and hard-drawn copper conductors!
•Cutting without deformation of the conductor
F
Technical data
Max. cutting performance, copper cable
Solid (max. conductor cross-section)
Stranded (max. conductor cross-section)
Flexible (max. conductor cross-section)
Flexible, stranded (max. conductor diameter)
Max. cutting performance, aluminium cable
Stranded (max. conductor cross-section)
Stranded (max. conductor diameter)
solid
Data / telephone / control cable
Max. outer diameter
Tool data
Length / Width / Height
Weight
Note
Ordering data
Version
max. 8 mm
max. 12 mm
max. 22 mm
max. 16 mm2
max. 16 mm2
max. 25 mm2
max. 16 mm2
max. 25 mm2
max. 50 mm2
max. 16 mm2
max. 35 mm2
max. 95 mm2
mm²/AWG
mm²/AWG
mm²/AWG
mm
KT8
16 / 6
16 / 6
16 / 6
8
KT12
16 / 6
25 / 3
35 / 2
12
KT22
25 / 3
50 / 1
95 / 3/0
22
mm²/mm
mm²
16 / 6
8
16
25 / 6
8
25
70 / 2/0
22
50
mm
8
12
22
mm
g
165 / 65 / 25
180
215 / 66 / 28
300
220 / 66 / 30
460
Tool closed
Type
KT 8
KT 12
Tool closed
Qty.
1
1
Order No.
9002650000
9002660000
Type
KT 22
Qty.
1
Order No.
1157830000
Note
F.42
1282250000 – 2012/2013
Tools
​
Special release tools for the Weidmüller W-Series terminal
connectors.
WAW 1
WAW 2
Notching tool
Notching tool
Tool for releasing poles from WQV 2.5 to WQV 35 cross
connections used in Weidmüller W-Series terminal
connectors.
Tool for punching out the cross-connection windows of the
Weidmüller W-Series terminal connectors,
WTR 2.5 disconnect terminal and
WSI 6 fuse terminal.
Accessories
Cutting and releasing tools
F
Technical data
Length
Weight
Note
Ordering data
Version
mm
g
WAW 1
167
227
Type
WAW 1 NEUTRAL
WAW 2
205
338
Qty.
1
Order No.
9004500000
Type
WAW 2
Qty.
1
Order No.
9004510000
Note
1282250000 – 2012/2013
F.43
Tools
KT ZQV
Accessories
Cutting and releasing tools
Cutting tool
Special cutting tool for clean pinch-free cutting of
Weidmüller Z-Series cross-connections
Cutting tool for clean cutting of Weidmüller
ZQV Series cross-connections
F
Technical data
Length / Width / Height
Weight
mm
g
KT ZQV
215
300
Note
Ordering data
Version
KT ZQV
KT ZQV
Qty.
1
Order No.
9002170000
Note
F.44
1282250000 – 2012/2013
Tools
TSLD
VKSW
Terminal rail cutting and punching tool
Wire channel cutter
Hand-operated mounting rail cutter for cutting and
perforating DIN mounting rails
Manually-operated wire channel cutter: for cutting (up to
125 mm wide) of wire channels and covers.
•Cutting with no burrs or waste
•Length end stop (1000 mm) is included in delivery
•Table-top unit for mounting on workbench or similar
work places
•Cutting with no burrs or waste
•Length end stop (1000 mm) with feed mechanism for
precision-angled cuts
•Table-top unit for mounting on workbench or similar
work places
•Hardened cutting edges made from specialized steel.
Accessories
Mounting rail cutter
Copper earthing bar
TS 32 mm according to EN 50035 (s = 1.5 mm)
F
TS 15/5.5 mm according to EN 50045 (s = 1.0 mm)
TS 35/7.5 mm according to EN 50022 (s = 1.0 mm)
TS 35/15 mm according to EN 50022 (s = 1.5 mm)
Technical data
Width
Length
Height
Weight
Note
Ordering data
Version
mm
mm
mm
g
TSLD
205
270
200
19000
VKSW
280
285
290
15000
Technical data without lever and length end stop
Type
TSLD
TSLD C
Qty.
1
1
Order No.
9918700000
1270310000
Type
VKSW
Qty.
1
Order No.
1137530000
Note
1282250000 – 2012/2013
F.45
Tools
KT 45 R
Accessories
Cable cutter
KT 55
•One-hand operation
•Easy handling
•Minimal hand force required
•Release option in every cutting position
•Not suitable for steel wires, steel-armoured cables,
aluminium alloys and hard-drawn copper conductors!
Cu + Al: max. 45 mm
Cu + Al: max. 55 mm
Cu: max. 300 mm2
Cu: max. 500 mm2
Al: max. 400 mm2
Al: max. 500 mm2
Cu: max. 400 mm2
Cu: max. 500 mm2
F
Technical data
Max. cutting performance, copper cable
Stranded (max. conductor cross-section)
Flexible (max. conductor cross-section)
Flexible, stranded (max. conductor diameter)
Copper sector cable
Max. cutting performance, aluminium cable
Stranded (max. conductor cross-section)
Stranded (max. conductor diameter)
Aluminium sector cable
Data / telephone / control cable
Max. outer diameter
Tool data
Length / Width / Height
Weight
Note
Ordering data
F.46
KT 45 R
300 / 600
400 / 800
45
3 x 70 SM
KT 55
500 / 1000
500 / 1000
55
3 x 150 SM
400 / 800
45
4 x 70 SE
500 / 1000
55
4 x 150 SE
mm
45
55
mm
g
290 / 85 / 40
740
365 / 115 / 45
1450
mm²/kcmil
mm²/kcmil
mm
mm²/kcmil
mm
Version
Type
KT 45 R
Pivoting blade KT 45 R
Qty.
1
1
Order No.
9202040000
9204270000
Note
The dimensions of the cable cutter refer to the delivery condition, i.e. the point of
the hinged blade parallel to the fixed blade.
Type
KT 55
Pivoting blade KT 55
Qty.
1
1
Order No.
9202060000
9204280000
The dimensions of the cable cutter refer to the delivery condition, i.e. the point of
the hinged blade parallel to the fixed blade.
1282250000 – 2012/2013
Tools
​
•Sheathing stripper for PVC cables
•Insulation can be stripped from any point along the cable
•Opening of slit insulation by means of integrated cutter
AM 16
AMF 6/10 AM 16
For round cable, Ø 6...17 mm
For ribbon cable, 6 mm² and 10 mm²
Accessories
Sheathing strippers
​•Also very suitable for stripping cables in the cable duct
F
Technical data
Max. stripping performance
Cable type
Conductor cross-section
Conductor diameter
Depth of cut
Cutting performance
UTP und STP data cables, max. diameter
Flexible (max. conductor cross-section)
Tool data
Length
Weight
Note
Ordering data
Version
mm
AM 16
PVC round cable
AMF 6/10
PVC ribbon cable
6...17
0,8 - 2,5 mm
0 - 4,0 mm
53
60
110
115
mm
mm²
mm
g
Type
AM 16
Qty.
1
Order No.
9204190000
Type
AMF 6/10
Qty.
Order No.
9204180000
Type
Spare blade
Qty.
1
Order No.
9204260000
Type
Spare blade
Qty.
1
Order No.
9204250000
Note
Accessories
Note
1282250000 – 2012/2013
Sheathing stripper
Sheathing stripper
F.47
Tools
stripax®
Accessories
Stripping and cutting tools
stripax® 16
NEW
0.08 - 10 mm²
•For flexible and solid conductors with PVC insulation
•Cable with double insulation in two processing steps
without special adjustment
•Automatic opening of clamping jaws after stripping
•No play in self-adjusting cutting unit
•Long-lasting
•No splicing of single conductors
•Optimised ergonomic design
•Stripping length adjustable via stop
•Adjustable for different insulation thicknesses
•Switchable partial stripping function
•Removable handle shells
•Fold-out cutting protection
•Custom marking with ESG device markers
•Stripping: PVC insulated flexible conductor, size
0.08...10 mm² (∼AWG 28...7)
•Cutting: PVC insulated flexible conductor, size
0.08...6 mm² (∼AWG 28...10)
•Conductors undamaged due to special self adjusting
stripping blades.
•Processing of multi-conductors, with thin flat ribbon
cables and even multiple conductors in one operationr
NEW
6 - 16 mm²
•Stripping: PVC insulated flexible and solid conductors
(∼AWG 10...6)
•Cutting: PVC insulated flexible and solid conductors, up
to 6 mm² (AWG 10)
•Conductors undamaged due to special self adjusting
stripping blades.
F
Technical data
Max. stripping performance
Cable type
Conductor cross-section
Stripping length, max.
Cutting performance
Max. cutting performance
Tool data
Length
Weight
Note
Ordering data
Version
mm2
mm
stripax®
Flexible and solid conductors with PVC insulation
0.08...10
25
stripax® 16
Flexible and solid conductors with PVC insulation
6...16
25
mm2
6
6
mm
g
190
175
190
175
Type
stripax®
Qty.
1
Order No.
9005000000
Type
stripax® 16
Qty.
1
Order No.
9005610000
Type
Spare stripping blades
Qty.
1
Order No.
1119030000
Type
Spare stripping blades
Qty.
1
Order No.
1119040000
Note
Accessories
Note
F.48
1282250000 – 2012/2013
Tools
stripax® plus 2.5
Crimping tools for wire end ferrules
0.5...2.5 mm²
Accessories
T​ hree functions:
•Cutting
•Stripping
•Crimping
• Wire-end ferrules with plastic collars, in compliance with
DIN 46228-4
•Ratchet for precise crimping.
•Efficient operation: Change of tools not necessary,
resulting in a significant time savings
•Automatic conveyance of wire-end ferrules
•Quick adjustment for differing cross-sections
•Easy handling of ferrule strips
Only Weidmüller fifty-piece linked ferrule strips can be
processed. The use of wire-end ferrules on reels can
lead to damage.
​•For processing linked wire-end ferrules from Weidmüller
0.5...2.5 mm² (∼AWG 20...14)
F
Technical data
Description of contact
Type of contact
Crimping range
Crimping range 1 (with multiple crimping positions)
Crimping range 2 (with multiple crimping positions)
Crimping range 3 (with multiple crimping positions)
Crimping range 4 (with multiple crimping positions)
Crimping range 5 (with multiple crimping positions)
Tool data
Length
Weight
Note
Ordering data
Version
mm²
mm²
mm²
mm²
mm
g
STRIPAX PLUS 2.5
Strips of linked wire-end ferrules
0.5...2.5
0.5...0.75
1...1.5
2.5
210
260
Only strip-type products from Weidmüller can be processed.
The use of wire-end ferrules on reels can lead to damage.
Type
STRIPAX PLUS 2.5
Spare cutting blade
Qty.
1
1
Order No.
9020000000
9050340000
Note
1282250000 – 2012/2013
F.49
Tools
Accessories
Crimping tools for wire end ferrules
​•For wire-end ferrules with and without plastic collars,
according to DIN 46228 T.1 and T.4 (∼ AWG 24...16)
•Ratchet for precise crimping.
•Release option in the event of incorrect operation
PZ 4
PZ 6/5
0.5...4 mm²
0.25...6 mm²
​•Only one crimping station for the whole cross-section
range
•Wire-end ferrule insertion from the side
​ Crimp complies with Euro-Norm EN 60947-1
•
•Approval according to VG 95211 (military designation
VG 95 236 T 14 B 002)
•Five crimping stations corresponding to the conductor
cross-sections
•Wire-end ferrule insertion from the side
F
Technical data
Description of contact
Type of contact
Crimping range
Crimping range 1 (with multiple crimping positions)
Crimping range 2 (with multiple crimping positions)
Crimping range 3 (with multiple crimping positions)
Crimping range 4 (with multiple crimping positions)
Crimping range 5 (with multiple crimping positions)
Tool data
Length
Weight
Note
Ordering data
Version
mm²
mm²
mm²
mm²
mm²
mm²
mm
g
PZ 4
Wire-end ferrules with/without plastic collars
0.5...4
PZ 6/5
Wire-end ferrules with/without plastic collars
0.25...6
0.25...0.5
0.75...1.5
2.5
4
6
200
448
200
423
Type
PZ 4
Qty.
1
Order No.
9012500000
Type
PZ 6/5
Qty.
1
Order No.
9011460000
Note
F.50
1282250000 – 2012/2013
Tools
​•For wire-end ferrules with and without plastic collars,
according to DIN 46228 T.1 and T.4 (∼ AWG 24...16)
•Ratchet for precise crimping.
•Release option in the event of incorrect operation
PZ 3
PZ 6 roto
0.5...6 mm²
0.14...6 mm²
​ Only one die for the whole cross-section range
•
•Wire-end ferrule insertion from the front
​ Only one die for the whole cross-section range
•
•Rotating die enables wire-end ferrule insertion from the
front or side
Accessories
Crimping tools for wire end ferrules
F
Technical data
Description of contact
Type of contact
Crimping range
Crimping range 1 (with multiple crimping positions)
Crimping range 2 (with multiple crimping positions)
Crimping range 3 (with multiple crimping positions)
Crimping range 4 (with multiple crimping positions)
Crimping range 5 (with multiple crimping positions)
Tool data
Length
Weight
Note
Ordering data
Version
mm²
mm²
mm²
mm²
mm²
mm²
mm
g
PZ 3
Wire-end ferrules with/without plastic collars
0.5...6
PZ 6 Roto
Wire-end ferrules with/without plastic collars
0.14...6
200
426
200
428
Type
PZ 3
Qty.
1
Order No.
0567300000
Type
PZ 6 Roto
Qty.
1
Order No.
9014350000
Note
1282250000 – 2012/2013
F.51
Tools
Accessories
Crimping tools for wire end ferrules
​•For wire-end ferrules with and without plastic collars,
according to DIN 46228 T.1 and T.4 (∼ AWG 24...16)
•Ratchet for precise crimping.
•Release option in the event of incorrect operation
F
Technical data
Description of contact
Type of contact
Crimping range
Crimping range 1 (with multiple crimping positions)
Crimping range 2 (with multiple crimping positions)
Crimping range 3 (with multiple crimping positions)
Crimping range 4 (with multiple crimping positions)
Crimping range 5 (with multiple crimping positions)
Tool data
Length
Weight
Note
Ordering data
Version
mm²
mm²
mm²
mm²
mm²
mm²
mm
g
PZ 16
PZ ZH 16
6...16 mm²
Twin wire-end ferrules from 6...16 mm²
​ Crimp complies with Euro-Norm EN 60947-1
•
•Approval according to VG 95211 (military designation
VG 95 236 T 14 B 002)
•Three crimping stations corresponding to the conductor
cross-sections
•Wire-end ferrule insertion from the side
​•Three crimping stations corresponding to the conductor
cross-sections
•Wire-end ferrule insertion from the side
PZ 16
Wire-end ferrules with/without plastic collars
6...16
6
10
16
PZ ZH 16
Twin wire-end ferrules
6...16
6
10
16
200
418
250
730
Type
PZ 16
Qty.
1
Order No.
9012600000
Type
PZ ZH 16
Qty.
1
Order No.
9013600000
Note
F.52
1282250000 – 2012/2013
Tools
PZ 50
​•For wire-end ferrules with and without plastic collars,
according to DIN 46228 T.1 and T.4 (∼ AWG 24...16)
•Ratchet for precise crimping.
•Release option in the event of incorrect operation
25...50 mm²
Accessories
Crimping tools for wire end ferrules
​ Crimp complies with Euro-Norm EN 60947-1
•
•Approval according to VG 95211 (military designation
VG 95 236 T 14 B 002)
•Three crimping stations corresponding to the conductor
cross-sections
•Wire-end ferrule insertion from the side
F
Technical data
Description of contact
Type of contact
Crimping range
Crimping range 1 (with multiple crimping positions)
Crimping range 2 (with multiple crimping positions)
Crimping range 3 (with multiple crimping positions)
Crimping range 4 (with multiple crimping positions)
Crimping range 5 (with multiple crimping positions)
Tool data
Length
Weight
Note
Ordering data
Version
mm²
mm²
mm²
mm²
mm
g
PZ 50
Wire-end ferrules with/without plastic collars
25...50
25
35
50
250
730
Type
PZ 50
Qty.
1
Order No.
9006450000
Note
1282250000 – 2012/2013
F.53
Tools
swifty®
Accessories
Combined cutting and screw driving tool
swifty®set
That does not damage the edge; for cutting of copper
cables.
•Solid cables with a diameter of up to 1.5 mm2
•Flexible cables with a diameter of up to 2.5 mm2
swifty®
•Cable cutting tool to mount on non-insulated screw
drivers with a blade diameter of 3.5 mm
•Minimum manual force required
•Automatic opening of the cutter
•Ergonomically designed grip
F
swifty®set
•Efficient operation:
•Only one tool for cable-processing in IDC-technology
•Suitable for screw and tension clamps
•Readily available pocket size
•For right-handed and left-handed use
•One-hand operation
Technical data
Maximum cutting capacity
Copper cable:
Solid cable (conductor cross-section)
Flexible cable (conductor cross-section)
Tool data
Length / Width / Height
Weight
Ordering data
F.54
mm2
mm2
1.5
2.5
mm
g
35 / 18 / 40
20
Type
swifty® (without screwdriver)
Qty.
1
Order No.
9006020000
Type
swifty®set (with screwdriver)
Screwdriver (SD 0.6 3.5x100)
Qty.
1
1
Order No.
9006060000
9008330000
1282250000 – 2012/2013
Tools
VDE-insulated screwdriver with pilot tip, for working on live parts up to 1000 VAC and
1500 VDC, DIN EN 60900, IEC 900, “GS“ safety tested, with each individual piece tested.
Bit made from fully hardened, high-alloy chromium-vanadiummolybdenum steel, gun-metal
finish..
Type
Blade type
Size / AF
a
b
c
0.4
0.5
0.8
1.0
2.5
3.0
4.0
5.5
80
100
100
125
80
100
Order No.
SDIS 2.5-5.5/PH/1/2
6-part set: VDE insulated slotted and crosshead PH screwdriver set
SDI 0.4x2.5x75
SDI 0.5x3.0x100
SDI 0.8x4.0x100
SDI 1.0x5.5x125
SDI PH 1
SDI PH 2
SDIS 2.5-5.5/PH1/2
1
2
Accessories
VDE-insulated screwdriver
9009730000
F
SDIS 2.5-5.5/PZ/1/2
Six-piece set: VDE-insulated slotted and PZ-crosshead screwdriver set
SDI 0.4x2.5x75
SDI 0.5x3.0x100
SDI 0.8x4.0x100
SDI 1.0x5.5x125
SDI PZ 1
SDI PZ 2
SDIS 2.5-5.5/PZ1/2
A
B
B
B
SDI 0.4x2.0x60
SDI 0.4x2.5x75
SDI 0.5x3.0x100
SDI 0.6x3.5x100
SDI 0.8x4.0x100
SDI 1.0x5.5x125
SDIS 2.0-5.5
A
A
B
B
B
B
0.4
0.5
0.8
1.0
2.5
3.0
4.0
5.5
1
2
80
100
100
125
80
100
1128540000
Weidmüller SoftFinish VDE-insulated electric screwdriver for working on live components
with up to 1000 V AC and 1500 V DC, DIN EN 60900, IEC 900. “GS“ safety-tested and
every product tested.
SDIS 2.0-5.5
VDE insulated slot-head screwdriver, SDI DIN 7437, ISO 2380/2, drive
output acc. to DIN 5264, ISO 2380/1. SoftFinish grip
1282250000 – 2012/2013
0.4
0.4
0.5
0.6
0.8
1.0
2.0
2.5
3.0
3.5
4.0
5.5
60
75
100
100
100
125
9205550000
F.55
Tools
NEW
Accessories
VDE-insulated screwdriver SlimLine
VDE-insulated screwdriver, for working on live parts up to 1000 V AC and
1500 V DC. DIN EN 60900, IEC 900, “GS safety-tested and each piece tested.
Bit made from fully hardened, high-alloy chromium-vanadium-molybdenum steel,
gun-metal finish.
A blade that is up to 33 % thinner
The SlimLine design allows you to reach deeply inset fittings and
tension clamp terminals.
Type
Blade type
Size / AF
a
b
c
Order No.
0.6
0.8
1.0
1.2
3.5
4.0
4.5
6.5
100
100
125
150
1274660000
1274670000
1274680000
1274690000
SDI SL S
VDE insulated slot-head screwdriver, SDI SL DIN 7437, ISO 2380/2,
drive output acc. to DIN 5264, ISO 2380/1. SoftFinish grip
F
SDI SL 0.6x3.5x100
SDI SL 0.8x4.0x100
SDI SL 1.0x4.5x125
SDI SL 1.2x6.5x150
B
B
B
B
SDIK SL PH
VDE-insulated crosshead screwdriver, Phillips type, SDIK SL PH
DIN 7438, ISO 8764/2-PH, output acc. to ISO 8764-PH, SoftFinish grip
SDIK SL PH1
SDIK SL PH2
1
2
80
100
1274710000
1274720000
SDIK SL PZ1
SDIK SL PZ2
1
2
80
100
1274730000
1274740000
SDIK SL PZ
VDE-insulated crosshead screwdriver Pozidrive type, SDIK SL PZ
DIN 7438, ISO 8764/2-PZ, output acc. to ISO 8764-PZ, SoftFinish grip
SDIS SL 2.5-5.5/PH/1/2
6-part set: VDE insulated slotted and crosshead PH screwdriver set
F.56
SDI SL 0.6x3.5x100
SDI SL 0.8x4.0x100
SDI SL 1.0x5.5x125
SDI SL 1.2x6.5x150
SDIK SL PH1
SDIK SL PH2
SDIS SL 2.5-5.5/PH1/2
B
B
B
B
0.6
0.8
1.0
1.2
1
2
3.5
4.0
4.5
6.5
100
100
125
150
80
100
1274750000
1282250000 – 2012/2013
Tools
Weidmüller SoftFinish screwdriver for general use. Blade made from fully hardened,
high-alloy chromium-vanadium-molybdenum steel, matt chrome finish.
Type
Blade type
Size / AF
a
b
c
Order No.
0.4
0.4
0.5
0.6
0.6
0.8
0.8
1.0
1.2
2.0
2.5
3.0
3.5
3.5
4.0
4.5
5.5
6.5
60
75
80
100
200
100
125
150
150
9037160000
9009030000
9008320000
9008330000
9010110000
9008340000
9009020000
9008350000
9009010000
SD S
Slotted screwdriver with rounded blade SD DIN 5265, ISO 2380/2,
output to DIN 5264, ISO 2380/1. ChromTop tip, SoftFinish grip
SD 0.4x2.0x60
SD 0.4x2.5x75
SD 0.5x3.0x80
SD 0.6x3.5x100
SD 0.6x3.5x200
SD 0.8x4.0x100
SD 0.8x4.5x125
SD 1.0x5.5x150
SD 1.2x6.5x150
B
A
A
A
A
A
A
A
A
Accessories
Uninsulated screwdriver
F
SDK PZ
Crosshead screwdriver, Pozidriv, SDK PZ DIN 5262, ISO 8764/2-PZ,
ouput to ISO 8764/1-PZ, ChromTop tip, SoftFinish grip
SDK PZ0
SDK PZ1
SDK PZ2
SDK PZ3
0
1
2
3
60
80
100
150
9008520000
9008530000
9008540000
9008550000
SD TH
Torx® TH screwdriver with hole in tip of blade (tamper-resistant), SD TH for
screwing Torx® and Torx®-TH security screws (pin in centre of Torx recess), chrome
top tip, SoftFinish grip. The SD TH20 can be used with the Klippon K housing
series.
SD TH20
20
100
9009160000
SK 10.0x125
10
125
9009070000
SK
The SK 10.0x125 Allen key, SK DIN 3125, drive output acc. to DIN 475/2,
SoftFinish grip. It can be used with all sizes from the Klippon TB and Klippon STB
housing series.
1282250000 – 2012/2013
F.57
Tools
Accessories
Weidmüller wrench set
Allen key made from fully hardened, high-alloy chromium-vanadium steel, produced acc. to
DIN ISO 2936 L (DIN 911), high-quality refined surface.
Type
Blade type
Size / AF
a
b
c
Order No.
SK WSD S
1.5
2
2.5
3
4
5
6
8
10
9-piece offset screwdriver set in Prostar holder, with MagicRing: holds
standard screws (size 3 and larger) in any position thanks to spring steel ring,
with ball point: for working at angles up to 25°.
SK WSD-S 1.5-10.0
9008850000
SK S
2
2.5
3
4
5
6
8
7-piece Allen key set
F
SKS 2.0-8.0
9008860000
SK S
2
2.5
3
4
5
6
8
7-piece Allen key set with MagicRing and ball point: holds standard screws
(size 3 and larger) in any position thanks to spring steel ring, with ball point: for
working at angles up to 25°.
SKS 2.0-8.0 MR
9008870000
TH S
9
10
15
20
25
27
30
40
8-piece Torx®-TH screwdriver set with hole in the blade point (tamper-proof), for
screwing Torx® and Torx®-TH tamper-proof screws (centre pin in profile)
TH-S 9-40
F.58
9008880000
1282250000 – 2012/2013
Accessories
F
1282250000 – 2012/2013
F.59
Tools
Accessories
DMS manual / DMSI manual
Torque screwdrivers with insulation up to 1000 V (VDE)
DMSI manual
The “DMSI manual” with an integral window-scale,
combined with a Weidmüller 1000 V insulated (VDE)
interchangeable blade ensures controlled tightening of
screws plus reliability in electrical applications.
Every 1000 V insulated handle (VDE) and blade (VDE) is
tested and provides the necessary safety up to
1000 V AC/1500 V DC.
F
Torque screwdrivers
DMS manual
This is a versatile tool suitable for a variety of jobs, with an
integral scale for easy reading of the torque value plus a
Weidmüller interchangeable blade.
Scale
Each model is available with two torque ranges:
• 0.5 to 1.7 Nm
• 2.0 to 8.0 Nm
• setting tool included
Advantages:
• Compact and especially lightweight design
• Torque set with special tool (included) to ensure the right
setting
• Ergonomic handle size to match the torque range
• Every tool checked and given an ID No., 100 % quality
control with verification and product reference
• Audible, unmistakable click upon reaching the torque, no
unnecessary effort
• Interchangeable blade made from high-quality wearresistant tool steel
• All tools comply with the accuracy stipulations of:
EN ISO 6798, BS EN 26789, ASME B107.14M
• Operating accuracy: ±6 % of set scale value
F.60
Setting tool
1282250000 – 2012/2013
Tools
Type
Size / AF
a
b
c
Order No.
DMS manual
Torque screwdriver EN ISO 6798, BS EN 26789, ASME B107.14M
DMS MANUELL 0.5-1.7
DMS MANUELL 2.0-8.0
0.5 - 1.7 Nm
2.0 - 8.0 Nm
WK S 0.4x2.5
WK S 0.5x3.0
WK S 0.6x3.5
WK S 0.8x4.0
WK S 1.0x5.5
max. 0.4 Nm
max. 0.6 Nm
max. 1.1 Nm
max. 2.5 Nm
max. 3.8 Nm
Accessories
Uninsulated torque screwdriver
9918370000
9918380000
WK K S
Interchangeable bits for torque screwdriver
output acc. to DIN 5264, ISO 2380/1
0.4
0.5
0.6
0.8
1.0
2.5
3.0
3.5
4.0
5.5
175
175
175
175
175
9918520000
9918530000
9918540000
9918550000
9918560000
F
WK K PZ
Interchangeable bits for torque screwdriver
output acc. to DIN 5260-PZ, ISO 8764/1-PZ
WK K PZ0
WK K PZ1
WK K PZ2
max. 0.9 Nm
max. 3.8 Nm
max. 5.5 Nm
175
175
175
9918600000
9918610000
9918620000
WK K PH0
WK K PH1
WK K PH2
max. 0.9 Nm
max. 3.8 Nm
max. 5.5 Nm
175
175
175
9918570000
9918580000
9918590000
WK K PH
Interchangeable bits for torque screwdriver
output acc. to DIN 5260-PH, ISO 8764/1-PH
WGK 1/4 C6.3 E6.3
Interchangeable bit with bit holder for torque screwdrivers
Drive: 1/4“ C6.3 and 1/4“ E6.3
1282250000 – 2012/2013
WK 1/4“ C6.3 E6.3
9202510000
F.61
Tools
Accessories
VDE-insulated torque screwdriver
Type
Size / AF
a
b
c
Order No.
DMSI manual
VDE-insulated torque screwdriver
EN ISO 6798, BS EN 26789, ASME B107.14M
DMSI MANUELL 0.5-1.7
DMSI MANUELL 2.0-8.0
0.5 - 1.7 Nm
2.0 - 8.0 Nm
WK SI 0.4x2.5
WK SI 0.5x3.0
WK SI 0.6x3.5
WK SI 0.8x4.0
WK SI 1.0x5.5
max. 0.4 Nm
max. 0.6 Nm
max. 1.1 Nm
max. 2.5 Nm
max. 3.8 Nm
WK IK PH0
WK IK PH1
WK IK PH2
WK IK PZ0
WK IK PZ1
WK IK PZ2
9918390000
9918400000
WK SI
VDE-insulated interchangeable bits for VDE-insulated torque screwdriver;
output acc. to DIN 5264, ISO 2380/1
220
220
220
220
220
9918410000
9918420000
9918430000
9918440000
9918450000
max. 0.9 Nm
max. 3.8 Nm
max. 5.5 Nm
220
220
220
9918460000
9918470000
9918480000
max. 0.9 Nm
max. 3.8 Nm
max. 5.5 Nm
220
220
220
9918490000
9918500000
9918510000
0.4
0.5
0.6
0.8
1.0
2.5
3.0
3.5
4.0
5.5
F
WK IK PH
VDE-insulated interchangeable bits for VDE-insulated torque screwdriver;
output acc. to DIN 5260-PH, ISO 8764/1-PH
WK IK PZ
VDE-insulated interchangeable bits for VDE-insulated torque screwdriver;
output acc. to DIN 5260-PZ, ISO 8764/1-PZ
F.62
1282250000 – 2012/2013
Tools
Pin and electrical cabinet key
Wrench with pegged pilot tip
Hexagon screwdriver with cross-grip made from
high-quality plastics
• Surface nickel-plated
• Made from hardened chromium-vanadium steel
• According to DIN 6911
• Designed for screws acc. to DIN 6912
IS 2 KG / IS 3 KG / IS 4 KG
Socket wrench
Hexagon screwdriver with cross-grip made from
high-quality plastics
• Surface nickel-plated
• Made from hardened chromium-vanadium steel
• According to DIN 6911
• Designed for screws acc. to DIN 6912
Cross-Key Master
Universal key
Ordering data
Type
IS 4 DIN 6911
IS 6 DIN 6911
IS 8 DIN 6911
Blade length (C)
60
80
90
Qty.
1
1
1
Order No.
0485100000
0407900000
0235000000
Technical data
Blade length [C]
Weight
Ordering data
Type
IS 2 KG
IS 3 KG
IS 4 KG
60 mm / 80 mm / 90 mm
34 g
Qty.
1
1
1
Order No.
1806630000
1806650000
1806660000
Technical data
Blade length [C]
Weight
100 mm
32 g
F
Ordering data
Type
CROSS-KEY MASTER
Qty.
1
Order No.
9918150000
• With bit holder and reversible bit (drives - refer to
symbols)
• Material: die cast zinc
• Dimensions: 62 x 90 mm
•A
pplications:
For almost all commercial locking systems in buildings
including: doors, window handles, radiator bleed valves,
sanitary installations, HVAC, gas and water supply.
Cross-Key Universal
Universal electrical cabinet key
1.0 x 7 mm
Universal mini electrical cabinet key
• With bit holder and reversible bit (drives - refer to
symbols)
• Material: die cast zinc
• Dimensions: 42 x 42 mm
•A
pplications:
For locking systems used in electrical engineering, fits
all standard electrical cabinet locks.
1282250000 – 2012/2013
PH 2
5 mm
Ordering data
Type
CROSS-KEY UNIVERSAL
Qty.
1
7 mm
12 mm
9 mm
13.5 mm
8 mm
13.5 mm
4 mm
10 mm
Order No.
9918130000
• With bit holder and reversible bit (drives - refer
to symbols)
• Material: die cast zinc
• Dimensions: 72 x 72 mm
•A
pplications:
For locking systems used in electrical engineering, fits
all standard electrical cabinet locks.
Cross-Key Universal S
Accessories
IS 4 / IS 6 / IS 8
1.0 x 7 mm
PH 2
5 mm
Ordering data
Type
CROSS-KEY UNIVERSAL S
Qty.
1
6 mm
11.5 mm
9 mm
13.5 mm
7-8 mm
13.5 mm
3-5 mm
9 mm
Order No.
9918140000
1.0 x 7 mm
PH 2
6 mm
11.5 mm
9 mm
13.5 mm
8 mm
13.5 mm
5 mm
9 mm
F.63
Tools
DMS 3
DMS 3 Set
Accessories
Rechargeable torque screwdriver
DMS 3 rechargeable torque screwdriver
•One-hand operation under all working conditions
•Switchable forward and reverse
•Two speeds: 200 and 400 rpm
•Precise torque settings from
approx. 0.3 ... 3 Nm in 6 steps
•Consistent performance during battery discharge
•Grip swings easily from rod to pistol form
•Takes 1/4“ bits held ball-bearing clamping mechanism
(form E6.3)
•Safety lock prevents inadvertent operation
•Easy changeover from battery drive to manual operation
up to 15 Nm
F
Technical data
Screwdriver
Motor
Idling speed
Max. torque
Chuck
Length
Weight
Battery
Type
Weight
Charger
Input
Output
Charging time
Weight
Ordering data
Accessories
F.64
2.4 V DC
200/400 min-1
3.0 Nm
1/4" E 6.3 DIN 3126
239 mm
400 g
2 Ni-Cd batteries each 1.2 V
122 g
230 V AC, 50 Hz, 50 mA
2.9 V AC, 1.4 A, 4.1 VA
1 hour
700 g
Type
DMS 3
Screwdriver incl. battery
Qty.
1
Order No.
9007440000
Type
DMS 3 set 1 (screwdriver incl. battery,
charger, bits, plastic carrying case)*
DMS 3 set 2 (as set1
with 1 additional battery)
Qty.
1
Order No.
9007470000
1
9007480000
*) see picture
Type
Spare battery
Charger
Qty.
1
1
Order No.
9007450000
9007460000
1282250000 – 2012/2013
Tools
Tools for insulated cable lugs
Tool
CTI 6
CTI 6 G
HTI 15
Station
Order No.
9006120000
9202850000
9014400000
Crimping tools for ferrules
PZ 1.5
AEH mm2
H 0.14
H 0.25
H 0.34
H 0.5
H 0.75
H 1.0
H 1.5
H 2.5
H 4.0
H 6.0
H 10.0
H 16.0
H 25.0
H 35.0
H 50.0
Order No.
9005990000
l
l
l
l
l
l
l
0.5 - 1.5
Type of contact
1.5 - 2.5
4.0 - 6.0
l
l
l
l
l
l
l
l
red
blue
Accessories
Tools
yellow
stripax®
plus 2.5
PZ 3
PZ 4
PZ 6
roto
PZ 6 HEX
PZ 6/5
PZ 16
PZ 50
9020000000
0567300000
9012500000
9014350000
9013650000
9011460000
9012600000
9006450000
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l1
l1
l1
l1
l1
l
l
l
l
l
l
l
l
l
l
l
l
l
F
l
l
l
l
l
l
l1 = ferrules in strip form only
Twin wire end ferrules are to be crimped according to the following table:
Tool
PZ 1.5
PZ 3
PZ 4
PZ 6 roto
PZ 6/5
Station
PZ ZH 16
Order No.
9005990000
0567300000
9012500000
9014350000
9011460000
9013600000
1282250000 – 2012/2013
H 1.0
H 1.5
Ferrules
H 2.5
H 4.0
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
1.5 mm2
2.5 mm2
2.5 mm2
4 mm2
6 mm2
H 0.5
H 0.75
l
l
l
l
l
1.5 mm2
H 6.0
H 10.0
H 16.0
l
l
l
F.65
Wire end ferrules
L1
Weidmüller colour code
packed loose
F
Weidmüller colour code
in multipack bag
F.66
S2
ø D2
L2
S1
Accessories
ø D1
Wire end ferrules with plastic collar
For conductors from 0.14 to 150 mm2
(AWG 26-300MCM)
Tin-plated copper
Dimensional tolerances to DIN 46228 part 4
• Polypropylene conical cable entry
• Heat-resistant up to 105 °C
• Cable entry made from non-flammable material
on request
Ordering data
Type
H0.25/10
H0.25/12
H0.34/10
H0.34/12
H0.5/12
H0.5/14
H0.5/16
H0.75/12
H0.75/14
H0.75/16
H0.75/18
H1.0/12
H1.0/14
H1.0/16
H1.0/18
H1.5/14
H1.5/16
H1.5/24
H2.5/15D
H2.5/19D
H2.5/25D
H4.0/18D
H4.0/20D
H4.0/26D
H6.0/20
H6.0/26
H10.0/22
H10.0/28
H16.0/22
H16.0/28
H25.0/30
H25.0/36
H35.0/30
H35.0/39
H50.0/36
H70.0/37
H95.0/44
H120.0/50
H150.0/54
ø mm2 AWG
0.25
24
0.25
24
0.34
22
0.34
22
0.50
20
0.50
20
0.50
20
0.75
18
0.75
18
0.75
18
0.75
18
1.00
17
1.00
17
1.00
17
1.00
17
1.50
16
1.50
16
1.50
16
2.50
14
2.50
14
2.50
14
4.00
12
4.00
12
4.00
12
6.00
10
6.00
10
10.00
7
10.00
7
16.00
6
16.00
6
25.00
3
25.00
3
35.00
2
35.00
2
50.00
1
70.00 2/0
95.00 3/0
120.00 4/0
150.00 300 MCM
Ordering data
Type
H0.14/10
H0.14/12
H0.25/10
H0.25/12
H0.34/10
H0.34/12
H0.5/12
H0.5/14
H0.5/16
H0.75/12
H0.75/14
H0.75/16
H0.75/18
H1.0/12
H1.0/14
H1.0/16
H1.0/18
H1.5/14
H1.5/16
H2.5/15
H4.0/18
ø mm2
0.14
0.14
0.25
0.25
0.34
0.34
0.50
0.50
0.50
0.75
0.75
0.75
0.75
1.00
1.00
1.00
1.00
1.50
1.50
2.50
4.00
AWG
26
26
24
24
22
22
20
20
20
18
18
18
18
17
17
17
17
16
16
14
12
L1
10.0
12.0
10.0
12.0
12.0
14.0
16.0
12.0
14.0
16.0
18.0
12.0
14.0
16.0
18.0
14.0
16.0
24.0
15.0
19.0
25.0
18.0
20.0
26.0
20.0
26.0
22.0
28.0
22.0
28.0
30.0
36.0
30.0
39.0
36.0
37.0
44.0
50.0
54.0
L2
6.0
8.0
6.0
8.0
6.0
8.0
10.0
6.0
8.0
10.0
12.0
6.0
8.0
10.0
12.0
8.0
10.0
18.0
8.0
12.0
18.0
10.0
12.0
18.0
12.0
18.0
12.0
18.0
12.0
18.0
16.0
22.0
16.0
25.0
20.0
21.0
25.0
30.0
32.0
D1
0.8
0.8
0.8
0.8
1.0
1.0
1.0
1.2
1.2
1.2
1.2
1.4
1.4
1.4
1.4
1.7
1.7
1.7
2.2
2.2
2.2
2.8
2.8
2.8
3.5
3.5
4.5
4.5
5.8
5.8
7.3
7.3
8.3
8.3
10.3
12.7
14.7
16.5
18.5
D2
1.8
1.8
2.0
2.0
2.6
2.6
2.6
2.8
2.8
2.8
2.8
3.0
3.0
3.0
3.0
3.5
3.5
3.5
4.2
4.2
4.2
4.8
4.8
4.8
6.3
6.3
7.6
7.6
8.8
8.8
11.2
11.2
12.7
12.7
15.0
16.0
18.0
21.0
23.5
S1
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.3
0.35
0.35
0.5
0.5
S2 Stripping length
0.25
8.0
0.25
10.0
0.25
8.0
0.25
10.0
0.25
8.0
0.25
10.0
0.25
12.0
0.25
8.0
0.25
10.0
0.25
12.0
0.25
14.0
0.25
8.0
0.25
10.0
0.25
12.0
0.25
15.0
0.25
10.0
0.25
12.0
0.25
20.0
0.25
10.0
0.25
14.0
0.25
20.0
0.3
12.0
0.3
14.0
0.3
20.0
0.3
14.0
0.3
20.0
0.4
15.0
0.4
21.0
0.4
15.0
0.4
21.0
0.4
18.0
0.4
24.0
0.4
19.0
0.4
28.0
0.5
26.0
0.6
26.0
0.6
31.0
0.7
36.0
0.75
38.0
L1
10.0
12.0
10.0
12.0
10.0
12.0
12.0
14.0
16.0
12.0
14.0
16.0
18.0
12.0
14.0
16.0
18.0
14.0
16.0
15.0
18.0
L2
6.0
8.0
6.0
8.0
6.0
8.0
6.0
8.0
10.0
6.0
8.0
10.0
12.0
6.0
8.0
10.0
12.0
8.0
10.0
8.0
10.0
D1
0.6
0.6
0.8
0.8
0.8
0.8
1.0
1.0
1.0
1.2
1.2
1.2
1.2
1.4
1.4
1.4
1.4
1.7
1.7
2.2
2.8
D2
1.5
1.5
1.8
1.8
2.0
2.0
2.6
2.6
2.6
2.8
2.8
2.8
2.8
3.0
3.0
3.0
3.0
3.5
3.5
4.2
4.8
S1
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.2
S2 Stripping length
0.25
8.0
0.25
10.0
0.25
8.0
0.25
10.0
0.25
8.0
0.25
10.0
0.25
8.0
0.25
10.0
0.25
12.0
0.25
8.0
0.25
10.0
0.25
12.0
0.25
14.0
0.25
8.0
0.25
10.0
0.25
12.0
0.25
15.0
0.25
10.0
0.25
12.0
0.25
10.0
0.3
12.0
Colour
● light blue
● light blue
l turquoise
l turquoise
l orange
l orange
l orange
m white
m white
m white
m white
l yellow
l yellow
l yellow
l yellow
l red
l red
l red
l blue
l blue
l blue
l grey
l grey
l grey
l black
l black
l ivory
l ivory
l green
l green
l brown
l brown
l beige
l beige
l olive green
l yellow
l red
l blue
l yellow
Colour
l grey
l grey
● light blue
● light blue
l turquoise
l turquoise
l orange
l orange
l orange
m white
m white
m white
m white
l yellow
l yellow
l yellow
l yellow
l red
l red
l blue
l grey
Qty.
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
100
100
100
100
100
100
100
50
50
50
50
50
25
25
25
25
Order No.
9025740000
9025760000
9025750000
9025770000
0409500000
0690700000
9025870000
0409600000
0462900000
9025860000
9025910000
0409700000
0463000000
9025950000
9025930000
0463100000
0635100000
0565600000
9019160000
9019170000
9019180000
9019190000
9019200000
9019210000
0533500000
0565700000
0534200000
0565800000
0565900000
0566000000
0317000000
0317100000
0317200000
0317300000
0444200000
9028200000
9028210000
9028220000
9028230000
Qty.
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
250
Order No.
9005180000
9028240000
9026050000
9025780000
9026030000
9025790000
9028260000
9026060000
9028270000
9028280000
9026070000
9028290000
9028300000
9028310000
9026080000
9028320000
9028340000
9026090000
9028350000
9026100000
9026010000
1282250000 – 2012/2013
Wire end ferrules
Weidmüller colour code
Strip of wire end ferrules
Weidmüller colour code
Reel of wire end ferrules
1282250000 – 2012/2013
S2
S1
L1
For conductors from 0.5 to 2.5 mm2 (AWG 22-14)
Tin-plated copper
Dimensional tolerances to DIN 46228 part 4
• Polypropylene conical cable entry
• Heat-resistant up to 105 °C
• Cable entry made from a non-flammible material
on request
Ordering data
Type
H0.5/14
H0.75/14
H1.0/14
H1.5/14
H2.5/14D
ø mm2
0.50
0.75
1.00
1.50
2.50
Ordering data
Type
H0.34/12
H0.5/14
H0.75/14
H1.0/14
H1.5/14
H2.5/14D
ø mm2
0.34
0.50
0.75
1.00
1.50
2.50
AWG
20
18
17
16
14
L1
14.0
14.0
14.0
14.0
14.0
L2
8.0
8.0
8.0
8.0
8.0
D1
1.0
1.2
1.4
1.7
2.2
D2
2.6
2.8
3.0
3.2
4.0
S1
0.15
0.15
0.15
0.15
0.15
S2 Stripping length
0.25
10.0
0.25
10.0
0.25
10.0
0.25
10.0
0.25
11.0
AWG
22
20
18
17
16
14
L1
12.0
14.0
14.0
14.0
14.0
14.0
L2
8.0
8.0
8.0
8.0
8.0
8.0
D1
0.8
1.0
1.2
1.4
1.7
2.2
D2
2.0
2.6
2.8
3.0
3.2
4.0
S1
0.15
0.15
0.15
0.15
0.15
0.15
S2 Stripping length
0.25
10.0
0.25
10.0
0.25
10.0
0.25
11.0
0.25
10.0
0.25
11.0
Colour
l orange
m white
l yellow
l red
l blue
Colour
l turquoise
l orange
m white
l yellow
l red
l blue
Accessories
L2
ø D2
ø D1
Wire end ferrules with plastic collar
Qty.
500
500
500
500
500
Order No.
9004270000
9004290000
9004320000
9004340000
9004360000
Qty.
5000
5000
5000
5000
5000
3000
Order No.
9004390000
9005810000
9005820000
9005830000
9005840000
9005850000
F
F.67
Wire end ferrules
L1
DIN colour code
packed loose
F
DIN colour code
in multipack bag
DIN colour code
Strip of wire end ferrules
S2
ø D2
L2
S1
Accessories
ø D1
Wire end ferrules with plastic collar
For conductors from 0.5 to 50 mm2 (AWG 20-1)
Tin-plated copper
Dimensional tolerances to DIN 46228 part 4
• Polypropylene conical cable entry
• Heat-resistant up to 105 °C
• Cable entry made from a non-flammable material
on request
Ordering data
Type
H0.5/12D
H0.5/14D
H0.5/16D
H0.75/12D
H0.75/14D
H0.75/16D
H0.75/18D
H1.0/12D
H1.0/14D
H1.0/16D
H1.0/18D
H1.5/14D
H1.5/16D
H1.5/18D
H1.5/24D
H2.5/15D
H2.5/19D
H2.5/25D
H4.0/18D
H4.0/20D
H4.0/26D
H6.0/20D
H6.0/26D
H10.0/22D
H10.0/28D
H16.0/22D
H16.0/28D
H25.0/30D
H25.0/36D
H35.0/32D
H35.0/30D
H35.0/39D
H50.0/36D
H50.0/41D
ø mm2
0.50
0.50
0.50
0.75
0.75
0.75
0.75
1.00
1.00
1.00
1.00
1.50
1.50
1.50
1.50
2.50
2.50
2.50
4.00
4.00
4.00
6.00
6.00
10.00
10.00
16.00
16.00
25.00
25.00
35.00
35.00
35.00
50.00
50.00
Ordering data
Type
H0.5/14D
H0.75/14D
H1.0/14D
H1.5/14D
H2.5/15
H4.0/18
ø mm2
0.50
0.75
1.00
1.50
2.50
4.00
Ordering data
Type
H0.5/14D
H0.75/14D
H1.0/14D
H1.5/14D
H2.5/14D
ø mm2
0.50
0.75
1.00
1.50
2.50
AWG
20
20
20
18
18
18
18
17
17
17
17
16
16
16
16
14
14
14
12
12
12
10
10
7
7
6
6
3
3
2
2
2
1
1
L1
12.0
14.0
16.0
12.0
14.0
16.0
18.0
12.0
14.0
16.0
18.0
14.0
16.0
18.0
24.0
15.0
19.0
25.0
18.0
20.0
26.0
20.0
26.0
22.0
28.0
22.0
28.0
30.0
36.0
32.0
30.0
39.0
36.0
41.0
L2
6.0
8.0
10.0
6.0
8.0
10.0
12.0
6.0
8.0
10.0
12.0
8.0
10.0
12.0
18.0
8.0
12.0
18.0
10.0
12.0
18.0
12.0
18.0
12.0
18.0
12.0
18.0
16.0
22.0
18.0
16.0
25.0
20.0
25.0
D1
1.0
1.0
1.0
1.2
1.2
1.2
1.2
1.4
1.4
1.4
1.4
1.7
1.7
1.7
1.7
2.2
2.2
2.2
2.8
2.8
2.8
3.5
3.5
4.5
4.5
5.8
5.8
7.3
7.3
8.3
8.3
8.3
10.3
10.3
D2
2.6
2.6
2.6
2.8
2.8
2.8
2.8
3.0
3.0
3.0
3.0
3.5
3.5
3.5
3.5
4.2
4.2
4.2
4.8
4.8
4.8
6.3
6.3
7.6
7.6
8.8
8.8
11.2
11.2
12.7
12.7
12.7
15.0
15.0
S1
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.3
0.3
S2 Stripping length
0.25
8.0
0.25
10.0
0.25
12.0
0.25
8.0
0.25
10.0
0.25
12.0
0.25
14.0
0.25
8.0
0.25
10.0
0.25
12.0
0.25
15.0
0.25
10.0
0.25
12.0
0.25
15.0
0.25
20.0
0.25
10.0
0.25
14.0
0.25
20.0
0.3
12.0
0.3
14.0
0.3
20.0
0.3
14.0
0.3
20.0
0.4
15.0
0.4
21.0
0.4
15.0
0.4
21.0
0.4
18.0
0.4
24.0
0.4
21.0
0.4
19.0
0.4
28.0
0.5
26.0
0.5
31.0
AWG
20
18
17
16
14
12
L1
14.0
14.0
14.0
14.0
15.0
18.0
L2
8.0
8.0
8.0
8.0
8.0
10.0
D1
1.0
1.2
1.4
1.7
2.2
2.8
D2
2.6
2.8
3.0
3.5
4.2
4.8
S1
0.15
0.15
0.15
0.15
0.15
0.2
S2 Stripping length
0.25
10.0
0.25
10.0
0.25
10.0
0.25
10.0
0.25
10.0
0.3
12.0
AWG
20
18
17
16
14
L1
14.0
14.0
14.0
14.0
14.0
L2
8.0
8.0
8.0
8.0
8.0
D1
1.0
1.2
1.4
1.7
2.2
D2
2.6
2.8
3.0
3.2
4.0
S1
0.15
0.15
0.15
0.15
0.15
S2 Stripping length
0.25
10.0
0.25
10.0
0.25
10.0
0.25
10.0
0.25
11.0
Colour
m white
m white
m white
l grey
l grey
l grey
l grey
l red
l red
l red
l red
l black
l black
l black
l black
l blue
l blue
l blue
l grey
l grey
l grey
l yellow
l yellow
l red
l red
l blue
l blue
l yellow
l yellow
l red
l red
l red
l blue
l blue
Colour
m white
l grey
l red
l black
l blue
l grey
Colour
m white
l grey
l red
l black
l blue
VG*
T 20A 001 A
T 20A 002 A
T 20A 003 A
T 20A 004 A
T 20A 005 A
T 20A 006 A
T 20A 007 A
T 20A 008 A
T 20A 009 A
T 20A 010 A
T 20A 011 A
T 20A 012 A
T 20A 013 A
T 20A 014 A
T 20A 015 A
T 20A 016 A
T 20A 017 A
T 20A 018 A
T 20A 019 A
T 20A 020 A
T 20A 021 A
T 20A 022 A
T 20A 023 A
T 20A 024 A
T 20A 025 A
T 20A 026 A
T 20A 027 A
T 20A 028 A
T 20A 030 A
T 20A 032 A
T 20A 031 A
T 20A 033 A
T 20A 034 A
T 20A 035 A
Qty.
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
100
100
100
100
100
100
100
50
50
50
50
50
50
50
Order No.
9019000000
9019010000
9019020000
9019030000
9019040000
9019050000
9019060000
9019070000
9019080000
9019100000
9019110000
9019120000
9019130000
9019140000
9019150000
9019160000
9019170000
9019180000
9019190000
9019200000
9019210000
9019220000
9019230000
9019240000
9019250000
9019260000
9019270000
9019280000
9019300000
9019320000
9019310000
9019330000
9019340000
9019350000
VG*
T 20A 002 A
T 20A 005 A
T 20A 009 A
T 20A 012 A
T 20A 016 A
019 A
Qty.
500
500
500
500
500
250
Order No.
9019400000
9019410000
9019420000
9019430000
9026100000
9026010000
VG*
T 20A 002 A
T 20A 005 A
T 20A 009 A
T 20A 012 A
T 20A 016 A
Qty.
500
500
500
500
500
Order No.
9004280000
9004300000
9004330000
9004350000
9004360000
VG* = Military designation according to VG 96933-20
F.68
1282250000 – 2012/2013
Wire end ferrules
DIN colour code
Reel of wire end ferrules
S2
S1
L1
For conductors from 0.5 to 2.5 mm2 (AWG 20-14)
Tin-plated copper
Dimensional tolerances to DIN 46228 part 4
• Polypropylene conical cable entry
• Heat-resistant up to 105 °C
• Cable entry made from a non-flammable material
on request
Ordering data
Type
H0.5/14D
H0.75/14D
H1.0/14D
H1.5/14D
H2.5/14D
ø mm2
0.50
0.75
1.00
1.50
2.50
AWG
20
18
17
16
14
L1
14.0
14.0
14.0
14.0
14.0
L2
8.0
8.0
8.0
8.0
8.0
D1
1.0
1.2
1.4
1.7
2.2
D2
2.6
2.8
3.0
3.2
4.0
S1
0.15
0.15
0.15
0.15
0.15
S2 Stripping length
0.25
10.0
0.25
10.0
0.25
11.0
0.25
10.0
0.25
11.0
Colour
m white
l grey
l red
l black
l blue
VG*
Accessories
L2
ø D2
ø D1
Wire end ferrules with plastic collar
Qty.
5000
5000
5000
5000
3000
Order No.
9005860000
9005870000
9005880000
9005890000
9005850000
F
1282250000 – 2012/2013
F.69
Wire end ferrules
L1
other colour code
packed loose
F
other colour code
in multipack bag
other colour code
Strip of wire end ferrules
F.70
S2
ø D2
L2
S1
Accessories
ø D1
Wire end ferrules with plastic collar
For conductors from 0.14 to 25 mm2 (AWG 26-3)
Tin-plated copper
Dimensional tolerances to DIN 46228 part 4
• Polypropylene conical cable entry
• Heat-resistant up to 105 °C
• Cable entry made from a non-flammable material
on request
Ordering data
Type
H0.25/10T
H0.25/12T
H0.5/12D
H0.5/14D
H0.5/16D
H0.75/12T
H0.75/14
H0.75/16T
H0.75/18T
H1.0/12D
H1.0/14D
H1.0/16D
H1.0/18D
H1.5/14D
H1.5/16D
H1.5/18D
H1.5/24D
H2.5/15T
H2.5/19T
H2.5/25T
H4.0/18T
H4.0/20T
H4.0/26T
H6.0/20T
H6.0/26T
H10.0/22T
H10.0/28T
H16.0/22T
H16.0/28T
H25.0/30T
H25.0/36T
ø mm2
0.25
0.25
0.50
0.50
0.50
0.75
0.75
0.75
0.75
1.00
1.00
1.00
1.00
1.50
1.50
1.50
1.50
2.50
2.50
2.50
4.00
4.00
4.00
6.00
6.00
10.00
10.00
16.00
16.00
25.00
25.00
Ordering data
Type
H0.14/10T
H0.25/10T
H0.25/12T
H0.5/14D
H0.75/14T
H1.0/14D
H1.5/14D
H1.5/24D
H2.5/15T
H4.0/18T
ø mm2
0.14
0.25
0.25
0.50
0.75
1.00
1.50
1.50
2.50
4.00
Ordering data
Type
H0.5/14D
H0.75/14T
H1.0/14D
H1.5/14D
H2.5/14T
ø mm2
0.50
0.75
1.00
1.50
2.50
AWG
24
24
20
20
20
18
18
18
18
17
17
17
17
16
16
16
16
14
14
14
12
12
12
10
10
7
7
6
6
3
3
L1
10.0
12.0
12.0
14.0
16.0
12.0
14.0
16.0
18.0
12.0
14.0
16.0
18.0
14.0
16.0
18.0
24.0
15.0
19.0
25.0
18.0
20.0
26.0
20.0
26.0
22.0
28.0
22.0
28.0
30.0
36.0
L2
6.0
8.0
6.0
8.0
10.0
6.0
8.0
10.0
12.0
6.0
8.0
10.0
12.0
8.0
10.0
12.0
18.0
8.0
12.0
18.0
10.0
12.0
18.0
12.0
18.0
12.0
18.0
12.0
18.0
16.0
22.0
D1
0.8
0.8
1.0
1.0
1.0
1.2
1.2
1.2
1.2
1.4
1.4
1.4
1.4
1.7
1.7
1.7
1.7
2.2
2.2
2.2
2.8
2.8
2.8
3.5
3.5
4.5
4.5
5.8
5.8
7.3
7.3
D2
1.8
1.8
2.6
2.6
2.6
2.8
2.8
2.8
2.8
3.0
3.0
3.0
3.0
3.5
3.5
3.5
3.5
4.2
4.2
4.2
4.8
4.8
4.8
6.3
6.3
7.6
7.6
8.8
8.8
11.2
11.2
S1
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
S2 Stripping length
0.25
8.0
0.25
10.0
0.25
8.0
0.25
10.0
0.25
12.0
0.25
8.0
0.25
10.0
0.25
12.0
0.25
14.0
0.25
8.0
0.25
10.0
0.25
12.0
0.25
15.0
0.25
10.0
0.25
12.0
0.25
15.0
0.25
20.0
0.25
10.0
0.25
14.0
0.25
20.0
0.3
12.0
0.3
14.0
0.3
20.0
0.3
14.0
0.3
20.0
0.4
15.0
0.4
21.0
0.4
15.0
0.4
21.0
0.4
18.0
0.4
24.0
AWG
26
24
24
20
18
17
16
16
14
12
L1
10.0
10.0
12.0
14.0
14.0
14.0
14.0
24.0
15.0
18.0
L2
6.0
6.0
8.0
8.0
8.0
8.0
8.0
18.0
8.0
10.0
D1
0.6
0.8
0.8
1.0
1.2
1.4
1.7
1.7
2.2
2.8
D2
1.5
1.8
1.8
2.6
2.8
3.0
3.5
3.5
4.2
4.8
S1
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.2
S2 Stripping length
0.25
8.0
0.25
8.0
0.25
10.0
0.25
10.0
0.25
10.0
0.25
10.0
0.25
10.0
0.25
20.0
0.25
10.0
0.3
12.0
AWG
20
18
17
16
14
L1
14.0
14.0
14.0
14.0
14.0
L2
8.0
8.0
8.0
8.0
8.0
D1
1.0
1.2
1.4
1.7
2.2
D2
2.6
2.8
3.0
3.2
4.0
S1
0.15
0.15
0.15
0.15
0.15
S2 Stripping length
0.25
10.0
0.25
10.0
0.25
10.0
0.25
10.0
0.25
11.0
Colour
l yellow
l yellow
m white
m white
m white
● light blue
● light blue
● light blue
● light blue
l red
l red
l red
l red
l black
l black
l black
lblack
l grey
l grey
l grey
l orange
l orange
l orange
l green
l green
l brown
l brown
m white
m white
l black
l black
Colour
l brown
l yellow
l yellow
m white
● light blue
l red
l black
l black
l grey
l orange
Colour
m white
● light blue
l red
l black
l grey
Qty.
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
100
100
100
100
100
100
100
50
50
Order No.
9021010000
9021020000
9019000000
9019010000
9019020000
9021030000
9021040000
9021050000
9021060000
9019070000
9019080000
9019100000
9019110000
9019120000
9019130000
9019140000
9019150000
9021070000
9021080000
9021090000
9021100000
9021110000
9021120000
9021130000
9021140000
9021150000
9021160000
9021170000
9021180000
9021190000
9021200000
Qty.
500
500
500
500
500
500
500
500
500
250
Order No.
9028250000
9021210000
9021220000
9019400000
9021230000
9019420000
9019430000
9004140000
9021240000
9021250000
Qty.
500
500
500
500
500
Order No.
9004280000
9004310000
9004330000
9004350000
9004370000
1282250000 – 2012/2013
Wire end ferrules
other colour code
Reel of wire end ferrules
S2
S1
L1
For conductors from 0.5 to 2.5 mm2 (AWG 20-14)
Tin-plated copper
Dimensional tolerances to DIN 46228 part 4
• Polypropylene conical cable entry
• Heat-resistant up to 105 °C
• Cable entry made from a non-flammable material
on request
Ordering data
Type
H0.5/14D
H0.75/14T
H1.0/14D
H1.5/14D
H2.5/14T
ø mm2
0.50
0.75
1.00
1.50
2.50
AWG
20
18
17
16
14
L1
14.0
14.0
14.0
14.0
14.0
L2
8.0
8.0
8.0
8.0
8.0
D1
1.0
1.2
1.4
1.7
2.2
D2
2.6
2.8
3.0
3.2
4.0
S1
0.15
0.15
0.15
0.15
0.15
S2 Stripping length
0.25
10.0
0.25
10.0
0.25
11.0
0.25
10.0
0.25
11.0
Colour
m white
● light blue
l red
l black
l grey
Accessories
L2
ø D2
ø D1
Wire end ferrules with plastic collar
Qty.
5000
5000
5000
5000
3000
Order No.
9005860000
9005900000
9005880000
9005890000
9005910000
F
1282250000 – 2012/2013
F.71
Wire end ferrules
Twin-wire end ferrules with plastic collar
Accessories
B
A
L2
For conductors from 2 No. 0.5 to 2 No. 16 mm2
(2 No. AWG 20 to 2 No. AWG 6)
Tin-plated copper
Dimensional tolerances to DIN 46228 part 4
• Polypropylene conical cable entry
• Heat-resistant up to 105 °C
• Cable entry made from a non-flammable material
on request
D1
S1
S2
Weidmüller colour code
packed loose
F
Weidmüller colour code
in multipack bag
F.72
L1
Ordering data
Type
H0.5/14
H0.5/16
H0.5/18
H0.75/14
H0.75/16
H0.75/19S
H0.75/24
H1.0/15
H1.0/15S
H1.0/19
H1.0/25
H1.5/16
H1.5/20
H1.5/26
H2.5/19D
H2.5/21D
H2.5/27D
H4.0/22D
H4.0/28D
H6.0/23
H6.0/29
H10.0/24S
H10.0/24
H10.0/30
H10.0/30S
H16.0/29
H16.0/38
ø mm2
0.50
0.50
0.50
0.75
0.75
0.75
0.75
1.00
1.00
1.00
1.00
1.50
1.50
1.50
2.50
2.50
2.50
4.00
4.00
6.00
6.00
10.00
10.00
10.00
10.00
16.00
16.00
Ordering data
Type
H0.5/14
H0.75/14
H0.75/16
H1.0/15
H1.0/15S
H1.0/19
H1.5/16
H1.5/20
H2.5/19D
H2.5/21D
H4.0/22D
H6.0/23
H10.0/24
ø mm2
0.50
0.75
0.75
1.00
1.00
1.00
1.50
1.50
2.50
2.50
4.00
6.00
10.00
AWG
20
20
20
18
18
18
18
17
17
17
17
16
16
16
14
14
14
12
12
10
10
7
7
7
7
6
6
L1
14.0
16.0
18.0
14.0
16.0
19.0
24.0
15.0
16.0
19.0
25.0
16.0
20.0
26.0
19.0
21.0
27.0
22.0
28.0
23.0
29.0
24.0
24.0
30.0
30.0
29.0
38.0
L2
8.0
10.0
12.0
8.0
10.0
12.0
18.0
8.0
8.0
12.0
18.0
8.2
12.0
18.0
10.0
12.0
18.0
12.0
18.0
12.0
18.0
12.0
12.0
18.0
18.0
16.0
25.0
D1
1.4
1.4
1.4
1.7
1.7
1.4
1.7
2.0
2.2
2.0
2.0
2.2
2.2
2.2
2.8
2.8
2.8
3.5
3.5
4.5
4.5
6.5
5.8
5.8
6.5
8.3
8.3
S1
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.3
0.3
S2
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.4
0.4
0.4
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.6
0.6
A
5.0
5.0
5.0
5.5
5.5
5.5
5.5
5.8
5.8
5.8
5.8
6.5
6.5
6.5
8.0
8.0
8.0
9.0
9.0
11.4
11.4
13.4
13.4
13.4
13.4
17.2
17.2
B
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.2
3.2
3.2
3.2
3.6
3.6
3.6
4.5
4.5
4.5
5.2
5.2
6.2
6.2
7.6
7.6
7.6
7.6
9.5
9.5
Stripping length
11.0
13.0
15.0
11.0
13.0
21.0
21.0
12.0
12.0
16.0
22.0
11.0
15.0
21.0
13.0
15.0
21.0
15.0
21.0
20.0
24.0
17.0
17.0
23.0
23.0
20.0
29.0
AWG
20
18
18
17
17
17
16
16
14
14
12
10
7
L1
14.0
14.0
16.0
15.0
16.0
19.0
16.0
20.0
19.0
21.0
22.0
23.0
24.0
L2
8.0
8.0
10.0
8.0
8.0
12.0
8.2
12.0
10.0
12.0
12.0
12.0
12.0
D1
1.4
1.7
1.7
2.0
2.2
2.0
2.2
2.2
2.8
2.8
3.5
4.5
5.8
S1
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.2
0.2
0.2
S2
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.4
0.4
0.5
0.5
0.5
A
5.0
5.5
5.5
5.8
5.8
5.8
6.5
6.5
8.0
8.0
9.0
11.4
13.4
B
3.0
3.0
3.0
3.2
3.2
3.2
3.6
3.6
4.5
4.5
5.2
6.2
7.6
Stripping length
11.0
11.0
13.0
12.0
12.0
16.0
11.0
15.0
13.0
15.0
15.0
20.0
17.0
Colour
l orange
l orange
l orange
m white
m white
m white
m white
l yellow
l yellow
l yellow
l yellow
l red
l red
l red
l blue
l blue
l blue
l grey
l grey
l black
l black
l ivory
l ivory
l ivory
l ivory
l green
l green
Colour
l orange
m white
m white
l yellow
l yellow
l yellow
l red
l red
l blue
l blue
l grey
l black
l ivory
Qty.
500
500
500
500
500
500
500
500
500
500
500
500
500
100
500
100
100
100
100
100
100
100
100
100
100
50
50
Order No.
9037200000
9037210000
9037220000
9037230000
9037240000
9202820000
9037250000
9037260000
9018690000
9037270000
9037280000
9037290000
9037300000
9037310000
9037500000
9037510000
9037520000
9037530000
9037540000
9037320000
9037330000
9018860000
9037340000
9037350000
9018870000
9037360000
9037370000
Qty.
500
500
500
500
500
500
500
500
250
250
100
100
100
Order No.
9004440000
9018510000
9004900000
9018530000
9018650000
9004910000
9004410000
9004920000
9004430000
9004740000
9004730000
9004930000
9004940000
1282250000 – 2012/2013
Wire end ferrules
Twin-wire end ferrules with plastic collar
A
L2
L1
For conductors from 2 No. 0.5 to 2 No. 16 mm2
(2 No. AWG 20 to 2 No. AWG 6)
Tin-plated copper
Dimensional tolerances to DIN 46228 part 4
• Polypropylene conical cable entry
• Heat-resistant up to 105 °C
• Cable entry made from a non-flammable material
on request
D1
S1
Accessories
B
S2
DIN colour code
packed loose
DIN colour code
in multipack bag
1282250000 – 2012/2013
Ordering data
Type
H0.5/14D
H0.5/16D
H0.5/18D
H0.75/14D
H0.75/16D
H0.75/19DS
H0.75/24D
H1.0/15D
H1.0/19D
H1.0/25D
H1.5/16D
H1.5/20D
H1.5/26D
H2.5/19D
H2.5/21D
H2.5/27D
H4.0/22D
H4.0/28D
H6.0/23D
H6.0/29D
H10.0/24DS
H10.0/24D
H10.0/30D
H10.0/30DS
H16.0/29D
H16.0/38D
ø mm2
0.50
0.50
0.50
0.75
0.75
0.75
0.75
1.00
1.00
1.00
1.50
1.50
1.50
2.50
2.50
2.50
4.00
4.00
6.00
6.00
10.00
10.00
10.00
10.00
16.00
16.00
Ordering data
Type
H0.5/14D
H0.75/14D
H0.75/16D
H1.0/15D
H1.0/19D
H1.5/16D
H1.5/20D
H2.5/19D
H2.5/21D
H4.0/22D
H6.0/23D
H10.0/26D
ø mm2
0.50
0.75
0.75
1.00
1.00
1.50
1.50
2.50
2.50
4.00
6.00
10.00
AWG
20
20
20
18
18
18
18
17
17
17
16
16
16
14
14
14
12
12
10
10
7
7
7
7
6
6
L1
14.0
16.0
18.0
14.0
16.0
19.0
24.0
15.0
19.0
25.0
16.0
20.0
26.0
19.0
21.0
27.0
22.0
28.0
23.0
29.0
24.0
24.0
30.0
30.0
29.0
38.0
L2
8.0
10.0
12.0
8.0
10.0
12.0
18.0
8.0
12.0
18.0
8.0
12.0
18.0
10.0
12.0
18.0
12.0
18.0
12.0
18.0
12.0
12.0
18.0
18.0
16.0
25.0
D1
1.4
1.4
1.4
1.7
1.7
1.4
1.7
2.0
2.0
2.0
2.2
2.2
2.2
2.8
2.8
2.8
3.5
3.5
4.5
4.5
6.5
5.8
5.8
6.5
8.3
8.3
S1
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.3
0.3
S2
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.4
0.4
0.4
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.6
0.6
A
5.0
5.0
5.0
5.5
5.5
5.5
5.5
5.8
5.8
5.8
6.5
6.5
6.5
8.0
8.0
8.0
9.0
9.0
11.4
11.4
13.4
13.4
13.4
13.4
17.2
17.2
B
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.2
3.2
3.2
3.6
3.6
3.6
4.5
4.5
4.5
5.2
5.2
6.2
6.2
7.6
7.6
7.6
7.6
9.5
9.5
Stripping length
11.0
13.0
15.0
11.0
13.0
21.0
21.0
12.0
16.0
22.0
11.0
15.0
21.0
13.0
15.0
21.0
15.0
21.0
20.0
24.0
17.0
17.0
23.0
23.0
20.0
29.0
AWG
20
18
18
17
17
16
16
14
14
12
10
7
L1
14.0
14.0
16.0
16.0
19.0
16.0
20.0
19.0
21.0
22.0
23.0
24.0
L2
8.0
8.0
10.0
8.0
12.0
8.0
12.0
10.0
12.0
12.0
12.0
12.0
D1
1.4
1.7
1.7
2.0
2.0
2.2
2.2
2.8
2.8
3.5
4.5
5.8
S1
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.2
0.2
0.2
S2
A
0.3
5.0
0.3
5.5
0.3
5.5
0.3
5.8
0.3
5.8
0.3
6.5
0.3
6.5
0.4
8.0
0.4
8.0
0.5
9.0
0.5 11.4
0.5 13.4
B
3.0
3.0
3.0
3.2
3.2
3.6
3.6
4.5
4.5
5.2
6.2
7.6
Stripping length
11.0
11.0
13.0
12.0
16.0
11.0
15.0
13.0
15.0
15.0
20.0
17.0
Colour
m white
m white
m white
l grey
l grey
l grey
l grey
l red
l red
l red
l black
l black
l black
l blue
l blue
l blue
l grey
l grey
l yellow
l yellow
l red
l red
l red
l red
l blue
l blue
Colour
m white
l grey
l grey
l red
l red
l black
l black
l blue
l blue
l grey
l yellow
l red
Qty.
500
500
500
500
500
500
500
500
500
500
500
500
100
500
100
100
100
100
100
100
100
100
100
100
50
50
Order No.
9037380000
9037390000
9037400000
9037410000
9037420000
9202830000
9037430000
9037440000
9037450000
9037460000
9037470000
9037480000
9037490000
9037500000
9037510000
9037520000
9037530000
9037540000
9037550000
9037560000
9018880000
9037570000
9037580000
9018890000
9037590000
9037600000
Qty.
500
500
500
500
500
500
500
250
250
100
100
100
Order No.
9004780000
9018520000
9004770000
9018540000
9004760000
9004420000
9004750000
9004430000
9004740000
9004730000
9004720000
9004710000
F
F.73
Wire end ferrules
Twin-wire end ferrules with plastic collar
Accessories
B
A
L2
For conductors from 2 No. 0.5 to 2 No. 16 mm2
(2 No. AWG 20 to 2 No. AWG 6)
Tin-plated copper
Dimensional tolerances to DIN 46228 part 4
• Polypropylene conical cable entry
• Heat-resistant up to 105 °C
• Cable entry madefrom a non-flammable material
on request
D1
S1
S2
other colour code
packed loose
F
other colour code
in multipack bag
F.74
L1
Ordering data
Type
H0.5/14
H0.5/16
H0.5/18
H0.75/14T
H0.75/16T
H0.75/19TS
H0.75/24T
H1.0/15D
H1.0/19D
H1.0/25D
H1.5/16D
H1.5/20D
H1.5/26D
H2.5/19T
H2.5/21T
H2.5/27T
H4.0/22T
H4.0/28T
H6.0/23T
H6.0/29T
H10.0/24T
H10.0/30T
H16.0/29T
H16.0/38T
ø mm2
0.50
0.50
0.50
0.75
0.75
0.75
0.75
1.00
1.00
1.00
1.50
1.50
1.50
2.50
2.50
2.50
4.00
4.00
6.00
6.00
10.00
10.00
16.00
16.00
Ordering data
Type
H0.75/16T
H1.0/15D
H1.0/19D
H1.5/16D
H1.5/20D
H2.5/19T
H2.5/21
H4.0/22T
H6.0/23T
H10.0/26T
ø mm2
0.75
1.00
1.00
1.50
1.50
2.50
2.50
4.00
6.00
10.00
AWG
20
20
20
18
18
18
18
17
17
17
16
16
16
14
14
14
12
12
10
10
7
7
6
6
L1
14.0
16.0
18.0
14.0
16.0
19.0
24.0
15.0
19.0
25.0
16.0
20.0
26.0
19.0
21.0
27.0
22.0
28.0
23.0
29.0
24.0
30.0
29.0
38.0
L2
8.0
10.0
12.0
8.0
10.0
12.0
18.0
8.0
12.0
18.0
8.0
12.0
18.0
10.0
12.0
18.0
12.0
18.0
12.0
18.0
12.0
18.0
16.0
25.0
D1
1.4
1.4
1.4
1.7
1.7
1.4
1.7
2.0
2.0
2.0
2.2
2.2
2.2
2.8
2.8
2.8
3.5
3.5
4.5
4.5
5.8
5.8
8.3
8.3
S1
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.2
0.2
0.2
0.2
0.2
0.2
0.3
0.3
S2
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.4
0.4
0.4
0.5
0.5
0.5
0.5
0.5
0.5
0.6
0.6
A
5.0
5.0
5.0
5.5
5.5
5.5
5.5
5.8
5.8
5.8
6.5
6.5
6.5
8.0
8.0
8.0
9.0
9.0
11.4
11.4
13.4
13.4
17.2
17.2
B
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.2
3.2
3.2
3.6
3.6
3.6
4.5
4.5
4.5
5.2
5.2
6.2
6.2
7.6
7.6
9.5
9.5
Stripping length
11.0
13.0
15.0
11.0
13.0
21.0
21.0
12.0
16.0
22.0
11.0
15.0
21.0
13.0
15.0
21.0
15.0
21.0
20.0
24.0
17.0
23.0
20.0
29.0
AWG
18
17
17
16
16
14
14
12
10
7
L1
16.0
16.0
19.0
16.0
20.0
19.0
21.0
22.0
23.0
24.0
L2
10.0
8.0
12.0
8.0
12.0
10.0
12.0
12.0
12.0
12.0
D1
1.7
2.0
2.0
2.2
2.2
2.8
2.8
3.5
4.5
5.8
S1
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.2
0.2
0.2
S2
0.3
0.3
0.3
0.3
0.3
0.4
0.4
0.5
0.5
0.5
A
5.5
5.8
5.8
6.5
6.5
8.0
8.0
9.0
11.4
13.4
B
3.0
3.2
3.2
3.6
3.6
4.5
4.5
5.2
6.2
7.6
Stripping length
13.0
12.0
16.0
11.0
15.0
13.0
15.0
15.0
20.0
17.0
Colour
l orange
l orange
l orange
● light blue
● light blue
● light blue
● light blue
l red
l red
l red
l black
l black
l black
l grey
l grey
l grey
l orange
l orange
l green
l green
l brown
l brown
m white
m white
Colour
● light blue
l red
l red
l black
l black
l grey
l grey
l orange
l green
l brown
Qty.
500
500
500
500
500
500
500
500
500
500
500
500
100
500
100
100
100
100
100
100
100
100
50
50
Order No.
9037200000
9037210000
9037220000
9037610000
9037620000
9202840000
9037630000
9037440000
9037450000
9037460000
9037470000
9037480000
9037490000
9037640000
9037650000
9037660000
9037670000
9037680000
9037690000
9037700000
9037710000
9037720000
9037730000
9037740000
Qty.
500
500
500
500
500
250
250
100
100
100
Order No.
9005140000
9018540000
9004760000
9004420000
9004750000
9018580000
9005150000
9018590000
9005160000
9005170000
1282250000 – 2012/2013
Wire end ferrules
Weidmüller colour code
packed loose
Weidmüller colour code
in multipack bag
1282250000 – 2012/2013
S2
S1
L1
For conductors from 1.5 to 16 mm2 (AWG 16-6)
Tin-plated copper
Dimensional tolerances to DIN 46228 part 4
• Polypropylene conical cable entry
• Heat-resistant up to 105 °C
• Cable entry made from a non-flammable material
on request
Ordering data
Type
H1.5/17.5 XS
H2.5/17.5 XS
ø mm2
1.50
2.50
Ordering data
Type
H1.5/17.5X
H1.5/19.5X
H2.5/17.5X
H2.5/21.5X
H4.0/19.5X
H6.0/23.0X
H10.0/24.0X
H16.0/25.5X
ø mm2
1.50
1.50
2.50
2.50
4.00
6.00
10.00
16.00
Accessories
L2
ø D2
ø D1
Wire end ferrules for short-circuit and earth-fault-proof cables
AWG
16
14
L1
17.5
17.5
L2
8.0
8.0
D1
1.8
2.3
D2
6.8
7.6
S1
0.15
0.15
S2
0.3
0.3
Stripping length Colour
20.0
l black
20.0
l blue
Qty.
100
100
Order No.
9202870000
9202880000
AWG
16
16
14
14
12
10
7
6
L1
17.5
19.5
17.5
21.5
19.5
23.0
24.0
25.5
L2
8.0
10.0
8.0
12.0
10.0
12.0
12.0
12.0
D1
1.8
1.8
2.3
2.3
2.9
3.6
4.6
6.0
D2
6.8
6.8
7.6
7.6
7.8
8.1
9.6
11.9
S1
0.15
0.15
0.15
0.15
0.2
0.2
0.2
0.2
S2
0.3
0.3
0.3
0.3
0.3
0.3
0.3
0.3
Stripping length
13.0
15.0
14.0
17.0
14.0
17.0
17.0
26.0
Qty.
100
100
100
100
100
100
100
100
Order No.
9006590000
9006630000
9006670000
9006710000
9006750000
9006790000
9006830000
9006870000
Colour
l black
l black
l blue
l blue
l grey
l yellow
l red
l blue
F
F.75
Wire end ferrules
L1
Weidmüller colour code
packed loose
F
Weidmüller colour code
in multipack bag
F.76
S2
ø D2
L2
S1
Accessories
ø D1
Wire end ferrules with plastic collar, special sizes
For conductors from 0.5 to 2.5 mm2 (AWG 20-14)
Tin-plated copper
Dimensional tolerances to DIN 46228 part 4
• Polypropylene conical cable entry
• Heat-resistant up to 105 °C
• Cable entry made from a non-flammable material
on request
Ordering data
Type
H0.34/11S
H0.5/14S
H0.5/14DS
H0.5/16DS
H0.5/16S
H0.75/14S
H0.75/14DS
H0.75/14TS
H0.75/15S
H1.0/14S
H1.0/14DS
H1.5/12S
H1.5/14S
H1.5/14DS
H2.5/12DS
H2.5/12TS
H2.5/14S
H2.5/14TS
H2.5/16DS
H4.0/20D
H10.0/22
ø mm2
0.34
0.50
0.50
0.50
0.50
0.75
0.75
0.75
0.75
1.00
1.00
1.50
1.50
1.50
2.50
2.50
2.50
2.50
2.50
4.00
10.00
Ordering data
Type
H0.75/14S
H1.0/14S
H1.5/14DS
H1.5/14S
ø mm2
0.75
1.00
1.50
1.50
AWG
22
20
20
20
20
18
18
18
18
17
17
16
16
16
14
14
14
14
14
12
7
L1
11.0
14.0
14.0
16.0
16.0
14.0
14.0
14.0
15.0
14.0
14.0
12.0
14.0
14.0
12.0
12.0
14.0
14.0
16.0
20.0
22.0
L2
6.0
8.0
8.0
10.0
10.0
8.0
8.0
8.0
9.0
8.0
8.0
6.0
8.0
8.0
6.0
6.0
8.0
8.0
10.0
12.0
12.0
D1
0.8
1.0
1.0
1.0
1.0
1.2
1.2
1.2
1.2
1.4
1.4
1.7
1.7
1.7
2.2
2.2
2.2
2.2
2.2
2.8
4.5
D2
2.6
2.9
2.9
2.9
2.9
3.4
3.4
3.4
2.8
3.5
3.5
3.5
3.9
3.9
4.2
4.2
4.0
4.0
4.2
4.7
7.1
S1
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.15
0.20
0.20
S2 Stripping length
0.40
6.0
0.25
10.0
0.25
10.0
0.25
12.0
0.25
12.0
0.25
10.0
0.25
10.0
0.25
10.0
0.25
10.0
0.25
10.0
0.25
10.0
0.25
8.0
0.25
10.0
0.25
10.0
0.25
8.0
0.25
8.0
0.25
10.0
0.25
10.0
0.25
13.0
0.50
15.0
0.60
15.0
AWG
18
17
16
16
L1
14.0
14.0
14.0
14.0
L2
8.0
8.0
8.0
8.0
D1
1.2
1.4
1.7
1.7
D2
3.4
3.5
3.9
3.9
S1
0.15
0.15
0.15
0.15
S2 Stripping length
0.25
10.0
0.25
10.0
0.25
10.0
0.25
10.0
Colour
l turquoise
l orange
m white
m white
l orange
m white
m white
● light blue
m white
l yellow
l red
l red
l red
l black
l blue
l grey
l blue
l grey
l blue
l grey
l ivory
Colour
m white
l yellow
l black
l red
Qty.
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
100
Order No.
9204090000
9004560000
9004590000
9202910000
9202900000
9025960000
9028580000
9018550000
9204240000
9025970000
9018560000
9025690000
9025980000
9025240000
9028490000
9036200000
1333100000
9426770000
9036220000
9203630000
9203620000
Qty.
500
500
500
500
Order No.
9025700000
9025710000
9028360000
9025720000
1282250000 – 2012/2013
Wire end ferrules
Wire end ferrules without plastic collar
without plastic collar
packed loose
1282250000 – 2012/2013
Ordering data
Type
H0.25/5
H0.5/10
H0.5/6
H0.75/10
H0.75/6
H1.0/10
H1.0/6
H1.5/7
H1.5/10
H1.5/12
H1.5/18
H2.5/7
H2.5/10
H2.5/12
H2.5/18
H4.0/9
H4.0/15
H4.0/12
H4.0/18
H6.0/10
H6.0/12
H6.0/15
H6.0/18
H10.0/12
H10.0/15
H10.0/18
H16.0/12
H16.0/15
H16.0/18
H16.0/25
H16.0/32
H25.0/15
H25.0/18
H25.0/25
H25.0/32
H35.0/18
H35.0/25
H35.0/30
H35.0/32
H50.0/18
H50.0/22
H50.0/32
H70.0/25
H70.0/32
H95.0/25
H95.0/32
H120.0/32
H150.0/32
H185.0/32
ø mm2 AWG
0.25
24
0.50
20
0.50
20
0.75
18
0.75
18
1.00
17
1.00
17
1.50
16
1.50
16
1.50
16
1.50
16
2.50
14
2.50
14
2.50
14
2.50
14
4.00
12
4.00
12
4.00
12
4.00
12
6.00
10
6.00
10
6.00
10
6.00
10
10.00
7
10.00
7
10.00
7
16.00
6
16.00
6
16.00
6
16.00
6
16.00
6
25.00
3
25.00
3
25.00
3
25.00
3
35.00
2
35.00
2
35.00
2
35.00
2
50.00
1
50.00
1
50.00
1
70.00
2/0
70.00
2/0
95.00
3/0
95.00
3/0
120.00
4/0
150.00 300 MCM
185.00 350 MCM
L1
5.0
10.0
6.0
10.0
6.0
10.0
6.0
7.0
10.0
12.0
18.0
7.0
10.0
12.0
18.0
9.0
15.0
12.0
18.0
10.0
12.0
15.0
18.0
12.0
15.0
18.0
12.0
15.0
18.0
25.0
32.0
15.0
18.0
25.0
32.0
18.0
25.0
30.0
32.0
18.0
22.0
32.0
25.0
32.0
25.0
32.0
32.0
32.0
32.0
L2
D1
0.8
1.0
1.0
1.2
1.2
1.4
1.4
1.7
1.7
1.7
1.7
2.2
2.2
2.2
2.2
2.8
2.8
2.8
2.8
3.5
3.5
3.5
3.5
4.5
4.5
4.5
5.8
5.8
5.8
5.8
5.8
7.3
7.3
7.3
7.3
8.3
8.3
8.3
8.3
10.3
10.3
10.3
12.5
12.5
14.5
14.5
17.2
19.5
21.2
Accessories
For conductors 0.25-185 mm2 (AWG 24-350MCM)
Material: tin-plated copper
Dimensional tolerances to DIN 46228 part 1
D2
1.6
2.1
2.1
2.3
2.3
2.5
2.5
2.8
2.8
2.8
2.8
3.4
3.4
3.4
3.4
4.0
4.0
4.0
4.0
4.7
4.7
4.7
4.7
5.8
5.8
5.8
7.5
7.5
7.5
7.5
7.5
9.5
9.5
9.5
9.5
11.0
11.0
11.0
11.0
13.0
13.0
13.0
15.0
15.0
17.0
17.0
19.0
21.0
23.5
S1
S2
Stripping length Colour
5.0
10.0
6.0
10.0
6.0
10.0
6.0
7.0
10.0
12.0
18.0
7.0
10.0
12.0
18.0
9.0
15.0
12.0
18.0
10.0
12.0
15.0
18.0
12.0
15.0
18.0
12.0
15.0
18.0
25.0
32.0
15.0
18.0
25.0
32.0
18.0
25.0
30.0
32.0
18.0
25.0
32.0
25.0
32.0
25.0
32.0
32.0
32.0
32.0
Qty.
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
500
500
1000
500
500
500
500
500
500
500
500
500
500
100
100
100
250
100
250
100
100
100
100
100
100
100
100
50
50
50
50
25
25
25
Order No.
9018910000
9004050000
0282600000
0542500000
0282700000
0282800000
0372600000
0372700000
0186500000
9004060000
9004070000
0373000000
9004080000
0186100000
9004090000
0373100000
9004100000
0244100000
9004110000
9004120000
0191900000
0124700000
9004130000
0282900000
0124800000
0379300000
0492500000
0124300000
0375200000
9004150000
9004160000
0124400000
0375300000
9004170000
9004180000
0368900000
9004190000
9451000000
9004200000
9004210000
9025880000
9004220000
9004230000
9004240000
9004250000
9004260000
9036240000
9036250000
9036260000
F
F.77
Insulated cable connectors
Accessories
PVC, with conical cable entry
Ring cable connector
Ordering data
Fork-type cable connector
Ordering data
F
Type
LIR 1.5M3 V
LIR 1.5M3.5 V
LIR 1.5M4 V
LIR 1.5M5 V
LIR 1.5M6 V
LIR 1.5M8 V
LIR 2.5M3 V
LIR 2.5M3.5 V
LIR 2.5M4 V
LIR 2.5M5 V
LIR 2.5M6 V
LIR 2.5M8 V
LIR 2.5M10 V
LIR 6.0M4 V
LIR 6M5 V
LIR 6M6 V
LIR 6M8 V
LIR 6.0M10 V
Type
LIS 1.5M3 V
LIS 1.5M3.5 V
LIS 1.5M4 V
LIS 1.5M5 V
LIS 1.5M6 V
LIS 2.5M3 V
LIS 2.5M3.5 V
LIS 2.5M4 V
LIS 2.5M5 V
LIS 2.5M6 V
LIS 6.0M4 V
LIS 6.0M5 V
LIS 6.0M6 V
LIS 6.0M8 V
LIS 6.0M10 V
Cross-section mm2 Colour
0.5 - 1.5
l
0.5 - 1.5
l
0.5 - 1.5
l
0.5 - 1.5
l
0.5 - 1.5
l
0.5 - 1.5
l
1.5 - 2.5
l
1.5 - 2.5
l
1.5 - 2.5
l
1.5 - 2.5
l
1.5 - 2.5
l
1.5 - 2.5
l
1.5 - 2.5
l
4-6
l
4-6
l
4-6
l
4-6
l
4-6
l
Cross-section mm2 Colour
0.5 - 1.5
l
0.5 - 1.5
l
0.5 - 1.5
l
0.5 - 1.5
l
0.5 - 1.5
l
1.5 - 2.5
l
1.5 - 2.5
l
1.5 - 2.5
l
1.5 - 2.5
l
1.5 - 2.5
l
4-6
l
4-6
l
4-6
l
4-6
l
4-6
l
Dimensions
M3
M 3.5
M4
M5
M6
M8
M3
M 3.5
M4
M5
M6
M8
M 10
M4
M5
M6
M8
M 10
d1
3.2
3.7
4.3
5.3
6.4
8.4
3.2
3.7
4.4
5.3
6.4
8.4
10.5
4.3
5.3
6.4
8.4
10.5
d
5.5
5.5
8.0
8.0
11.6
11.6
6.4
6.4
8.5
8.5
12.0
12.0
14.0
9.5
9.5
12.0
15.0
15.0
D
4.0
4.0
4.0
4.0
4.0
4.0
4.5
4.5
4.5
4.5
4.5
4.5
4.5
6.4
6.4
6.4
6.4
6.4
L
16.05
16.05
18.3
18.3
21.0
21.0
15.6
15.6
19.05
19.05
22.3
22.3
22.3
22.4
22.4
24.65
27.65
27.65
b
11.3
11.3
11.3
11.3
11.3
11.3
11.3
11.3
11.3
11.3
11.3
11.3
11.3
14.15
14.15
14.15
14.15
14.15
S1*
0.75
0.75
0.75
0.75
0.75
0.75
0.8
0.8
0.8
0.8
0.8
0.8
0.8
1
1
1
1
1
Qty.
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
Order No.
9200070000
9200080000
9200090000
9200100000
9200110000
9200120000
9200150000
9200160000
9200170000
9200180000
9200190000
9200200000
9200210000
9200230000
9200240000
9200250000
9200260000
9200270000
Dimensions
M3
M 3.5
M4
M5
M6
M3
M 3.5
M4
M5
M6
M4
M5
M6
M8
M 10
d1
3.2
3.7
4.3
5.3
6.4
3.2
3.7
4.3
5.3
6.4
4.3
5.3
6.4
8.4
10.5
d
5.7
6.4
7.2
8.1
11.0
5.7
6.4
7.2
8.1
11.0
9.0
9.0
12.0
14
18
D
L
b
4.0 17.8 11.3
4.0 17.8 11.3
4.0 17.8 11.3
4.0 17.8 11.3
4.0 21.3 11.3
4.5 17.8 11.3
4.5 17.8 11.3
4.5 17.8 11.3
4.5 17.8 11.3
4.5 21.3 11.3
6.4 21.35 14.15
6.4 21.35 14.15
6.4 25.15 14.15
6.5
34 13.15
6.5 34.7 13.15
S1*
0.75
0.75
0.75
0.75
0.75
0.8
0.8
0.8
0.8
0.8
1
1
1
1
1
Qty.
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
Order No.
9200290000
9200300000
9200310000
9200320000
9200330000
9200350000
9200360000
9200370000
9200380000
9200390000
9200410000
9200420000
9200430000
9200440000
9200450000
Qty.
100
100
100
Order No.
9200460000
9200470000
9200480000
Qty.
100
100
Order No.
9036290000
9036300000
S1* = Connection density
Pin-type cable connector
Ordering data
Hook-type cable connector
Ordering data
to ESI 50-18 part 2
L1
Type
LIP 1.5R12 V
LIP 2.5R12 V
LIP 6.0R14 V
Cross-section mm2 Colour
l
0.5 - 1.5
l
1.5 - 2.5
l
4-6
Type
HB 1-17
HB 1-13
Cross-section mm2
0.25 - 1.5
1.0 - 2.5
Dimensions
12.0
12.0
14.0
D
L
4 23.3
4.5 23.3
6.4 28.15
Colour
l
l
b
11.3
11.3
14.5
L1
27.2
27.2
f
1.9
1.9
2.7
L2
16.75
16.75
B
4.6
3.0
B
L2
F.78
1282250000 – 2012/2013
Insulated cable connectors
Butt connector
Ordering data
Flat blade receptacles
Ordering data
with copper sleeve
Type
LIB 1.5B25 VF
LIB 2.5B25 VF
LIB 6.0B26 VF
Type
LIF 1.5F288 R
LIF 1.5F488 R
LIF 1.5F638 R
LIF 2.5F488 R
LIF 2.5F638 R
LIF 6.0F638 R
Accessories
PVC, with conical cable entry
Cross-section mm2 Colour
l
0.5 - 1.5
l
1.5 - 2.5
l
4-6
Cross-section mm2 Colour
l
0.5 - 1.5
l
0.5 - 1.5
l
0.5 - 1.5
l
1.5 - 2.5
l
1.5 - 2.5
l
4-6
Dimensions
24.5
24.5
26.0
D
3.8
4.3
6
L
26
26
26
Dimensions
2.8 x 0.8 mm
4.8 x 0.8 mm
6.3 x 0.8 mm
4.8 x 0.8 mm
6.3 x 0.8 mm
6.3 x 0.8 mm
d2*
2.8
4.8
6.3
4.8
6.3
4.8
d3*
0.8
0.8
0.8
0.8
0.8
0.8
D
4.0
4.0
4.0
5.0
5.0
6.8
L
18.7
19.2
20.8
19.2
20.8
23.8
b
10.0
10.0
10.0
10.0
10.0
13.0
w
3.8
5.7
7.4
5.7
7.4
7.4
Qty.
100
100
100
Order No.
9200490000
9200500000
9200510000
Qty.
100
100
100
100
100
100
Order No.
9200520000
9200530000
9200540000
9200550000
9200560000
9200570000
F
Flat blade connector
with copper sleeve
Flat blade receptacles. piggy-back
with copper sleeve
Flat blade receptacles. full insulation
with copper sleeve
Ordering data
Type
LIF 1.5M638 R
LIF 2.5M638 R
LIF 6.0M638 R
Cross-section mm2 Colour
l
0.5 - 1.5
l
1.5 - 2.5
l
4-6
Ordering data
Type
LIF 1.5T638 R
LIF 2.5T638 R
LIF 6.0T638 R
Cross-section mm2 Colour
l
0.5 - 1.5
l
1.5 - 2.5
l
4-6
Ordering data
Type
LIF 1.5F638 RF
LIF 2.5F638 RF
LIF 6.0F638 RF
Cross-section mm2 Colour
l
0.5 - 1.5
l
1.5 - 2.5
l
4-6
Dimensions
6.3 x 0.8 mm
6.3 x 0.8 mm
6.3 x 0.8 mm
d2*
6.3
6.3
6.3
d3*
0.8
0.8
0.8
D
4.0
5.0
6.8
L
20.8
20.8
23.8
b
10.0
10.0
13.0
w
6.3
6.3
6.3
Qty.
100
100
100
Order No.
9200580000
9200590000
9200600000
Dimensions
6.3 x 0.8 mm
6.3 x 0.8 mm
6.3 x 0.8 mm
d2*
6.3
6.3
6.3
d3*
0.8
0.8
0.8
D
4.0
5.8
6.8
L
20.8
20.8
23.8
b
10.0
10.0
13.0
w
7.4
7.4
7.4
Qty.
100
100
100
Order No.
9200610000
9200620000
9200630000
Dimensions
6.3 x 0.8 mm
6.3 x 0.8 mm
6.3 x 0.8 mm
d2*
6.3
6.3
6.3
d3*
0.8
0.8
0.8
D
4.0
5.0
6.8
L
22.0
22.0
24.5
b
10.5
10.5
13.0
w
7.4
7.4
5.7
Qty.
100
100
100
Order No.
9200640000
9200650000
9200660000
d2* = Plug-in width
d3* = Plug-in density
1282250000 – 2012/2013
F.79
Insulated cable connectors
Accessories
PVC, with conical cable entry
Round plug
with copper sleeve
Sockets for round plugs
with copper sleeve
Ordering data
Type
LID 1.5M4 R
LID 2.5M5 R
LID 6.0M5 R
Cross-section mm2 Colour
l
0.5 - 1.5
l
1.5 - 2.5
l
4-6
Ordering data
Type
LID 1.5F4 RF
LID 2.5F5 RF
LID 6.0F5 RF
Cross-section mm2 Colour
l
0.5 - 1.5
l
1.5 - 2.5
l
4-6
Dimensions
Ø 4 mm
Ø 5 mm
Ø 5 mm
d
4.0
5.0
5.0
D
4.0
5.0
5.8
L
20.8
20.8
23.8
b
10.0
10.0
13.0
Qty.
100
100
100
Order No.
9200670000
9200680000
9200690000
Dimensions
Ø 4 mm
Ø 5 mm
Ø 5 mm
d
4.0
5.0
5.0
D
4.0
5.0
5.0
L
23.0
23.0
24.0
b
10.5
11.5
13.8
Qty.
100
100
100
Order No.
9200700000
9200710000
9200720000
F
F.80
1282250000 – 2012/2013
Similar pages