SMF5V0A-M to SMF51A-M Vishay Semiconductors Surface Mount ESD Protection Diodes FEATURES 1 • • • • 2 • 20278 • 17249 MARKING (example only) • • XY • • 20279 Bar = cathode marking Y = type code (see table below) X = date code • • • • For surface mounted applications Low-profile package Optimized for LAN protection applications Ideal for ESD protection of data lines in accordance with IEC 61000-4-2 (IEC 801-2) Ideal for EFT protection of data lines in accordance with IEC 61000-4-4 (IEC 801-4) ESD-protection acc. IEC 61000-4-2 ± 30 kV contact discharge ± 30 kV air discharge Low incremental surge resistance, excellent clamping capability 200 W peak pulse power capability with a 10/1000 µs waveform, repetition rate (duty cycle): 0.01 % Very fast response time High temperature soldering guaranteed: 260 °C/10 s at terminals e3 - Sn AEC-Q101 qualified Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC Halogen-free according to IEC 61249-2-21 definiton ORDERING INFORMATION SMF5V0A-M-xx GS08 = 3K per 7" reel (8 mm tape), 30K/box GS18 = 10K per 13" reel (8 mm tape), 50K/box Environmental suffix -M- defines halogen-free Part number PACKAGE DATA DEVICE NAME PACKAGE NAME SMF5V0A-M TYPE CODE MOLDING COMPOUND FLAMMABILITY RATING 15 mg UL 94 V-0 MOISTURE SENSITIVITY SOLDERING CONDITIONS LEVEL NE SMF6V5A-M NK SMF7V0A-M NM SMF7V5A-M NP SMF8V0A-M NR SMF8V5A-M NT SMF9V0A-M NV SMF10A-M NX SMF11A-M SMF12A-M WEIGHT NZ SMF SMF13A-M OE 260 °C/10 s at terminals OG SMF14A-M OK SMF15A-M OM SMF16A-M OP SMF17A-M OR SMF18A-M OT SMF20A-M OV SMF22A-M OX SMF24A-M OZ Document Number: 83355 Rev. 1.0, 22-Sep-10 MSL level 1 (according J-STD-020) For technical questions, contact: [email protected] www.vishay.com 1 SMF5V0A-M to SMF51A-M Surface Mount ESD Protection Diodes Vishay Semiconductors PACKAGE DATA DEVICE NAME PACKAGE NAME TYPE CODE SMF26A-M PE SMF28A-M PG SMF30A-M PK SMF33A-M PM SMF36A-M SMF SMF40A-M PP PR SMF43A-M PT SMF45A-M PV SMF48A-M PX SMF51A-M PZ WEIGHT MOLDING COMPOUND FLAMMABILITY RATING 15 mg UL 94 V-0 MOISTURE SENSITIVITY SOLDERING CONDITIONS LEVEL MSL level 1 (according J-STD-020) 260 °C/10 s at terminals ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITIONS tp = 10/1000 µs waveform acc. IEC 61000-4-5 Peak pulse current tp = 8/20 µs waveform acc. IEC 61000-4-5 Peak pulse power 8.3 ms single half sine-wave Air discharge acc. IEC 61000-4-2; 10 pulses Thermal resistance UNIT IPPM A 1000 W 200 W IFSM Contact discharge acc. IEC 61000-4-2; 10 pulses ESD immunity VALUE see “Electrical Characteristics” PPP tp = 10/1000 µs waveform acc. IEC 61000-4-5 Peak forward surge current SYMBOL VESD 20 A ± 30 kV ± 30 kV 180 K/W Mounted on epoxy glass PCB with 3 mm x 3 mm, Cu pads ( 40 µm thick) RthJA IF = 12 A VF 3.5 V Junction temperature TJ - 55 to + 150 °C TSTG - 55 to + 150 °C Forward clamping voltage Operating temperature Storage temperature ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PART NUMBER REVERSE BREAKDOWN VOLTAGE at IT, tp 5 ms REVERSE REVERSE TEST WORKING CURRENT CURRENT at VRWM VOLTAGE REVERSE MAXIMUM PEAK PULSE CLAMPING CAPACITANCE PROTECTION PATHS VOLTAGE at VR = 0 V, CURRENT at IPPM tp = 10/1000 s f = 1 MHz VBR MIN. (V) IT (mA) VRWM (V) IR (µA) IPPM (A) VC (V) CD TYP. (pF) Nchannel SMF5V0A-M SMF6V0A-M 6.40 6.67 10 10 5 6 400 400 21.7 19.4 9.2 10.3 1030 1010 1 1 SMF6V5A-M 7.22 10 6.5 250 17.9 11.2 850 1 SMF7V0A-M 7.78 10 7 100 16.7 12 750 1 SMF7V5A-M 8.33 1 7.5 50 15.5 12.9 730 1 SMF8V0A-M 8.89 1 8 25 14.7 13.6 670 1 SMF8V5A-M 9.44 1 8.5 10 13.9 14.4 660 1 SMF9V0A-M 10 1 9 5 13.5 15.4 620 1 SMF10A-M 11.1 1 10 2.5 11.8 17 570 1 SMF11A-M 12.2 1 11 2.5 11 18.2 460 1 SMF12A-M 13.3 1 12 2.5 10.1 19.9 440 1 SMF13A-M 14.4 1 13 1 9.3 21.5 420 1 SMF14A-M 15.6 1 14 1 8.6 23.2 370 1 SMF15A-M 16.7 1 15 1 8.2 24.4 350 1 SMF16A-M 17.8 1 16 1 7.7 26 340 1 SMF17A-M 18.9 1 17 1 7.2 27.6 310 1 www.vishay.com 2 For technical questions, contact: [email protected] Document Number: 83355 Rev. 1.0, 22-Sep-10 SMF5V0A-M to SMF51A-M Surface Mount ESD Protection Diodes Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PART NUMBER REVERSE BREAKDOWN VOLTAGE at IT, tp 5 ms REVERSE REVERSE TEST WORKING CURRENT CURRENT at VRWM VOLTAGE REVERSE MAXIMUM PEAK PULSE CLAMPING CAPACITANCE PROTECTION PATHS VOLTAGE at VR = 0 V, CURRENT at IPPM tp = 10/1000 s f = 1 MHz VBR MIN. (V) IT (mA) VRWM (V) IR (µA) IPPM (A) VC (V) CD TYP. (pF) Nchannel SMF18A-M 20 1 18 1 5.8 29.2 305 1 SMF20A-M 22.2 1 20 1 6.2 32.4 207 1 SMF22A-M 24.4 1 22 1 5.6 35.5 265 1 SMF24A-M 26.7 1 24 1 5.1 38.9 240 1 SMF26A-M 28.9 1 26 1 4.8 42.1 225 1 SMF28A-M 31.1 1 28 1 4.4 45.4 210 1 SMF30A-M 33.3 1 30 1 4.1 48.4 205 1 SMF33A-M 36.7 1 33 1 3.8 53.3 190 1 SMF36A-M 40 1 36 1 3.4 58.1 180 1 SMF40A-M 44.4 1 40 1 3.1 64.5 165 1 SMF43A-M 47.8 1 43 1 2.9 69.4 160 1 SMF45A-M 50 1 45 1 2.8 72.7 155 1 SMF48A-M 53.3 1 48 1 2.6 77.4 150 1 SMF51A-M 56.7 1 51 1 2.4 82.4 145 1 TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 150 PPP - Peak Pulse Power (kW) Non-repetitive pulse waveform shown in fig. 3 TA = 25 °C 1 IPPM - Peak Pulse Current, % IRSM 10 tr =10 µs 17250 Peak Pulse Power (PPP) or Current (IPPM) Derating in Percentage (%) Fig. 1 - Peak Pulse Power Rating 17251 Peak value IPPM 100 Half value IPPM IPPM 2 50 0.1 0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms td - Pulse Width (s) TJ = 25 °C pulse width (td) is defined as the point where the peak current decays to 50 % of IPPM 0 0 10/100 s waveform as defined by R.E.A. td 1 17252 2 3 4 t - Time (ms) Fig. 3 - Pulse Waveform 100 75 50 25 0 0 25 50 75 100 125 150 175 200 TA - Ambient Temperature Fig. 2 - Pulse Derating Curve Document Number: 83355 Rev. 1.0, 22-Sep-10 For technical questions, contact: [email protected] www.vishay.com 3 SMF5V0A-M to SMF51A-M Surface Mount ESD Protection Diodes Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (inches): SMF 0.85 (0.033) 0 (0.000) 0.1 (0.004) 5 5 0.05 (0.002) Detail Z enlarged 1.2 (0.047) 0.8 (0.031) 0.25 (0.010) 1.9 (0.075) 1.7 (0.067) 0.35 (0.014) 1.08 (0.043) 2.9 (0.114) 0.88 (0.035) 2.7 (0.106) 3.9 (0.154) 3.5 (0.138) Foot print recommendation: Created - Date: 15. February 2005 Rev. 3 - Date: 13. March 2007 Document no.:S8-V-3915.01-001 (4) 1.3 (0.051) 1.4 (0.055) 1.3 (0.051) 2.9 (0.114) 17247 www.vishay.com 4 For technical questions, contact: [email protected] Document Number: 83355 Rev. 1.0, 22-Sep-10 SMF5V0A-M to SMF51A-M Surface Mount ESD Protection Diodes Vishay Semiconductors BLISTERTAPE DIMENSIONS in millimeters (inches) PS Document-No.: S8-V-3717.02-001 (3) 18513 Document Number: 83355 Rev. 1.0, 22-Sep-10 For technical questions, contact: [email protected] www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1