Datasheet MANN SERIES – Signal Isolator WAV E P a k D C / D C A configurable isolator with auxiliary power supply, the WAVEPak is designed for the conversion of analog voltage or current signals. It is a four-wire DC isolator with complete three-way isolation between the input, output and supply. NEW Technical features: • Converts and isolates DC voltages and currents • 2 kV isolation between the ports • Optional 24 V DC supply for loop powered transmitter input • 12...60 V DC power supply • Adjustable input for current or voltage • Active or passive current input • Scalable outputs via front pushbuttons • Input/output testing without removing cables • Highly accurate measurement ability ± 0.1 % (typical ± 0.05 %) • LED status display • Pluggable connection terminals • Mounts on TS 35 mounting rail • Compact 12.5 mm wide housing • CE, cULus Canada Mexico United States Weidmuller, Canada 10 Spy Court Markham, Ontario L3R 5H6 Telephone: (800) 268-4080 Facsimile: (905) 475-2798 Email: [email protected] Website: www.weidmuller.ca Weidmuller, Mexico Blvd. Hermanos Serdán 698 Col. San Rafael Oriente Puebla, Puebla, Mexico C.P. 72029 Telephone: 01 222 2686267 Facsimile: 01 222 2686219 Email: [email protected] Website: www.weidmuller.com.mx Weidmuller 821 Southlake Blvd. Richmond, Virginia 23236 Telephone: (800) 849-9343 Facsimile: (804) 379-2593 Email: [email protected] Website: www.weidmuller.com MANN SERIES – Signal isolator Configurable signal isolator/converter in 4-wire technology WAV E P a k D C / D C 3-way isolator Wiring option A (input passive) +24 V 1 2 3 4 0V 7 Iout Iin 8 PS 0V 0V V/I 5 Vout Vin V/I 6 L Wiring option B (input active) +24 V 1 2 0V 7 Iout 0V +24 V 0V 3 H 5 Vout V/I TP– Technical data 6 Connections Input Type m- oder Spannungseingang, per Jumper konfigurierbar Input signal r 0 to 10 V Sensor supply DC output Smallest received measuring span Input resistance omeingang) oder > 1 MΩ Spannungseingang) Step response time %)> Resolution .76 mV per bit Output Type m- oder Spannungsausgang, per Jumper konfigurierbar Output signal 0 to 10 V Smallest received measuring span Load resistance current, max. Load resistance voltage, max. Residual ripple /sub> Resolution .76 mV per bit General data Voltage supply Power consumption Linearity ; 0,1 % (typ. ± 0,05 %)> Humidity % (no condensation) Temperature coefficient Long-term drift h Step response time %)> Impulse withstand voltage Data backup ars Operating temperature/Storage temperature Approvals Vorbereitung Insulation coordination EMC standards Insulation voltage t / power supply Rated voltage Data of Housing Clamping range (rating- / min. / max.) Type of connection / Terminal rail Type of Housing Length x width x height / Weight Note V/I 4 W 8 PS TP+ Current or voltage input, configurable with jumpers 0 to 22 mA or 0 to 10 V 20 mA @ 24 V DC output 4 mA or 2 V ceived measuring span [2] 100 Ω (current input) or > 1 MΩ (voltage input) < 220 ms (10…90 %)> 3.5 µA / 1.76 mV per bit Current or voltage output, configurable with jumpers 0 to 22 mA or 0 to 10 V 4 mA or 2 V ceived measuring span ≤ 1 kΩ current, max. ≥ 500 kΩ oltage, max. < 20 mVss 3.5 µA / 1.76 mV per bit 12…60 V DC ly 2.5 W @ 24 V DC on < ± 0.1 % (typ. ± 0.05 %) 10 to 90 % (non condensing) ≤ 0.05 % / °C ficient 0.1 % / 10,000 h < 220 ms (10…90 %) 4 kV (1.2/50 µs) d voltage ≥ 100 years 0 °C…+60 °C/-25°C…+70°C ge temperature CE, cULus Terminal 1 7 4 3 2 3 3 2 6 5 8 5 Signal Signal + Signal – Signal + Signal – Signal + Signal – Signal + Signal – Signal + Signal – Signal + Signal – Supply voltage Voltage input Current input Loop Powered Input Voltage output Current output Typical application for the WAVEPak 24 V DC PLC Flow transmitter Input 4 ... 20 mA WAVEPak DC/DC Output 4 ... 20 V Power supply DIN EN 61326 s 2 kV input / output / power supply 300 Veff mm2 mm/g 1.5 / 0.5 / 2.5 Screw connection / TS 35 Plastic enclosure 112.4 x 12.5 x 92.4 / 83 Ordering data Type WAVEPak DC/DC Qty. 1 Order No. 7940024139 Note Accessories Note 2 Subject to technical changes • 3/09-1.6M-LIT0904