3 IPAK, Straight Lead

MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
3 IPAK, STRAIGHT LEAD
CASE 369AC−01
ISSUE O
DATE 08 FEB 2005
SCALE 1:1
B
V
C
E
R
A
SEATING PLANE
K
W
F
J
G
H
D
3 PL
0.13 (0.005) W
NOTES:
1.. DIMENSIONING AND TOLERANCING
PER ANSI Y14.5M, 1982.
2.. CONTROLLING DIMENSION: INCH.
3. SEATING PLANE IS ON TOP OF
DAMBAR POSITION.
4. DIMENSION A DOES NOT INCLUDE
DAMBAR POSITION OR MOLD GATE.
DIM
A
B
C
D
E
F
G
H
J
K
R
V
W
INCHES
MIN
MAX
0.235 0.245
0.250 0.265
0.086 0.094
0.027 0.035
0.018 0.023
0.037 0.043
0.090 BSC
0.034 0.040
0.018 0.023
0.134 0.142
0.180 0.215
0.035 0.050
0.000 0.010
MILLIMETERS
MIN
MAX
5.97
6.22
6.35
6.73
2.19
2.38
0.69
0.88
0.46
0.58
0.94
1.09
2.29 BSC
0.87
1.01
0.46
0.58
3.40
3.60
4.57
5.46
0.89
1.27
0.000
0.25
GENERIC
MARKING DIAGRAM*
Discrete
YWW
xxx
xxxxxx
xxxxxxxxx = Device Code
Y
= Year
WW
= Work Week
*This information is generic. Please refer to
device data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “ ”,
may or may not be present.
DOCUMENT NUMBER:
STATUS:
98AON20252D
ON SEMICONDUCTOR STANDARD
NEW STANDARD:
 Semiconductor Components Industries, LLC, 2002
October, DESCRIPTION:
2002 − Rev. 0
http://onsemi.com
3 IPAK, STRAIGHT LEAD
1
Electronic versions are uncontrolled except when
accessed directly from the Document Repository. Printed
versions are uncontrolled except when stamped
“CONTROLLED COPY” in red.
Case Outline Number:
PAGE 1 OFXXX
2
DOCUMENT NUMBER:
98AON20252D
PAGE 2 OF 2
ISSUE
O
REVISION
RELEASED FOR PRODUCTION. REQ. BY T. HOCK.
DATE
27 JAN 2005
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
 Semiconductor Components Industries, LLC, 2005
February, 2005 − Rev. 01O
Case Outline Number:
369AC
Similar pages